What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 51 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 51 of 72

5340-15-127-7640
Molla

151277640
9903315: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-118-6450
Coulisse

151186450
73154953: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-109-9568
Attacco Longherone

151099568
13737-001A00: RNCC: 3 | RNVC: 2
13737-001: RNCC: 5 | RNVC: 2
13737-001A00: RNCC: 5 | RNVC: 9
13737-001: RNCC: 5 | RNVC: 9

14 Mar 1990

5340-15-118-1331
Flangia Vincolo Ast

151181331
04214-101: RNCC: 3 | RNVC: 2
04214-101A00: RNCC: 5 | RNVC: 2

23 Mar 1994

5340-15-119-7370
Support Ass

151197370
01TL23361: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-163-2988
Halter

151632988
6370.331: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-149-2921
Dust And Moisture Seal Protective Cap-Plug

151492921
4866423: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-193-6604
Quick Release Plunger

151936604
163121432: RNCC: 3 | RNVC: 2
GN615.1-M6-BS: RNCC: 3 | RNVC: 2
(241)A0199163121432: RNCC: 5 | RNVC: 2
(241)A0774GN615.1-M6-BS: RNCC: 5 | RNVC: 2

28 Jun 2010

5340-15-146-6940
Knob For Silencer B

151466940
907/12AT-MC-WD2: RNCC: 3 | RNVC: 2

18 Aug 1997

5340-15-154-0386
Padlock

151540386
0-116082: RNCC: 3 | RNVC: 2
(241)A39630-116082: RNCC: 5 | RNVC: 2
1PA39630-116082: RNCC: 5 | RNVC: 2

15 Mar 2001

5340-15-234-5073
Copertura Foro Box

152345073
6645 4 160-01: RNCC: 3 | RNVC: 2
534015E143163: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-185-1868
Maschera Due Filtri

151851868
MOD750: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-005-1551
Seat

150051551
2989: RNCC: 3 | RNVC: 2

9 Dec 2013

5340-15-118-0423
Piastrino Coperchie

151180423
D0484853: RNCC: 3 | RNVC: 2

10 Apr 1995

5340-15-155-9332
Control Rod

151559332
60187606: RNCC: 3 | RNVC: 2

7 Oct 2002

5340-15-193-7526
Dust And Moisture Seal Protective Plug

151937526
17.313.000: RNCC: 3 | RNVC: 2

8 Jul 2010

5340-15-180-9372
Rh Plate

151809372
109-0322-10-284: RNCC: 3 | RNVC: 2
(241)A0126109-0322-10-284: RNCC: 5 | RNVC: 2

22 Aug 2008

5340-15-107-9910
Spaser

151079910
312-0577/01: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-100-2212
Resilient Mount

151002212
AA/50: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-068-7831
Fascetta

150687831
206-9426-03-1: RNCC: 3 | RNVC: 2

30 Jan 1987

5340-15-067-9153
Corrosion Preventive Anode

150679153
AF923-9-1540984: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-059-9703
Dust And Moisture Seal Protective Plug

150599703
109-0101-51-1: RNCC: 3 | RNVC: 2

22 Nov 1976

5340-15-148-9305
Fermo Pistone

151489305
2206-0040-001: RNCC: 3 | RNVC: 2

2 Nov 1998

5340-15-222-2713
Ruota Piena Non Met

152222713
050033: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-114-3130
Bloccaggio Completo

151143130
CF328425: RNCC: 3 | RNVC: 2

4 Jun 1992

5340-15-058-8768
Collare Compl

150588768
206-9400-04-1: RNCC: 3 | RNVC: 2

8 Jun 1975

5340-15-179-4828
Desiccators

151794828
873-5401-001: RNCC: 3 | RNVC: 2
M0017145: RNCC: 5 | RNVC: 2

22 Jan 2007

5340-15-213-8753
Catenaccio Giap Per

152138753
GS2112: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-153-3852
Inserto Non Filetta

151533852
A254AP25F0: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-142-3931
Scodellino Molla El

151423931
818248: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-187-5472
Left Side Assy

151875472
G0734.0000: RNCC: 3 | RNVC: 2

9 Apr 2009

5340-15-192-1111
Bracketangle

151921111
A2810483-403: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-003-8960
Stand Base

150038960
182707171: RNCC: 3 | RNVC: 2
(241)A0199182707171: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-176-5404
Prolunga In Allumin

151765404
360.016: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-149-3452
Leva Per Giunto Acc

151493452
98428926: RNCC: 3 | RNVC: 2

2 Feb 1999

5340-15-106-0631
Scodellino Molla

151060631
2.4719.010.3: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-008-9997
Ritegno Trasparente

150089997
109-0310-27-18: RNCC: 3 | RNVC: 2

11 Jun 1981

5340-15-175-8696
Serratura Da Infila

151758696
313.50: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-193-6987
Turnbuckle

151936987
UNI6610M12X180: RNCC: 3 | RNVC: 2

2 Jul 2010

5340-15-217-6887
Tagliatubi Per Pvc

152176887
99036: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-001-1456
Key Blank

150011456
DM 17: RNCC: 3 | RNVC: 2

31 May 2013

5340-15-118-6510
Carter De Protectio

151186510
70079853: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-156-3067
Resilient Mount

151563067
122621270: RNCC: 3 | RNVC: 2

17 Jan 2003

5340-15-051-3675
Fascetta

150513675
4508084: RNCC: 3 | RNVC: 2
4508084: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-120-8463
Bracket

151208463
301531/1: RNCC: 3 | RNVC: 2

4 Sep 1995

5340-15-102-8087
Testa Di Tirante Fi

151028087
433A1422-401: RNCC: 3 | RNVC: 2

27 Oct 1988

5340-15-153-7005
Base (1) Per Sosteg

151537005
125510153: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-103-4373
Rubber Bumper

151034373
1923968: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-120-8326
Stud

151208326
301236: RNCC: 3 | RNVC: 2

4 Sep 1995

5340-15-120-4774
Tirante Elastico Co

151204774
1233632451: RNCC: 3 | RNVC: 2
1233632451: RNCC: 5 | RNVC: 9

15 Nov 1996

5340-15-120-6911
Accumulato Supporto

151206911
D0470442: RNCC: 3 | RNVC: 2

10 Jul 1996

5340-15-142-4268
Fascetta

151424268
M9433: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-162-2679
Shock Mount Pad

151622679
93.20.26.12: RNCC: 3 | RNVC: 2

17 May 2001

5340-15-110-4380
Hinge

151104380
2584822: RNCC: 3 | RNVC: 2
02584822: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-196-6300
Padlock

151966300
PN UAS 00042194: RNCC: 3 | RNVC: 2
5340F76036044: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-067-8752
Maniglia Con Chiave

150678752
36.149: RNCC: 3 | RNVC: 2
36.149: RNCC: 3 | RNVC: 2

31 May 1986

5340-15-117-1896
Resilient Mount

151171896
UL000376R0002: RNCC: 3 | RNVC: 2

23 Mar 1994

5340-15-153-3763
Sostegno Elastico

151533763
9597 480 00258: RNCC: 3 | RNVC: 2

21 Dec 2000

5340-15-102-3033
Bush

151023033
476909: RNCC: 3 | RNVC: 2

19 Jul 1988

5340-15-121-7296
Top Beam Cover

151217296
MBEU90472: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-156-2126
Special Ring

151562126
(241)A3460CBD71068P02: RNCC: 3 | RNVC: 2
CBD71068P02: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-120-8459
Viewi Panel

151208459
301526/1: RNCC: 3 | RNVC: 2

4 Sep 1995

5340-15-122-5592
Arm

151225592
BL366/10X65: RNCC: 3 | RNVC: 2
01TL21185: RNCC: 5 | RNVC: 2

3 Sep 1996

5340-15-156-7324
Hook

151567324
(241)A3460CBD70802P01: RNCC: 3 | RNVC: 2
CBD70802P01: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-15-166-4969
Handle

151664969
232A2030003: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-166-4793
Cup

151664793
3412756: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-055-1127
Morsetto Serracavo

150551127
55041-3: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-205-8657
Angle Bracket

152058657
5801491418: RNCC: 3 | RNVC: 2

6 Apr 2012

5340-15-219-7391
Cilindro Con Pomolo

152197391
CIL6200070: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-195-2015
Cover

151952015
76025937: RNCC: 3 | RNVC: 2

7 Mar 2011

5340-15-204-5917
Paracolpo Gomma

152045917
WMP053000501: RNCC: 3 | RNVC: 2
(241)A2309WMP053000501: RNCC: 5 | RNVC: 2

22 Nov 2011

5340-15-005-6891
Piastra Speciale

150056891
0-33840: RNCC: 3 | RNVC: 2

12 Aug 1979

5340-15-106-2201
Morsetto A Serrabor

151062201
2.4689.020.6: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-199-4125
C Ghiera Anteriore

151994125
76827: RNCC: 3 | RNVC: 2
(241)A017876827: RNCC: 5 | RNVC: 2

22 Mar 2005

5340-15-003-8881
Dust And Moisture Seal Protective Cover

150038881
182713139: RNCC: 3 | RNVC: 2
(241)A0199182713139: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-194-8731
Drivehead Assembly

151948731
3292963: RNCC: 3 | RNVC: 2
10/300320: RNCC: 5 | RNVC: 2

27 Jan 2011

5340-15-166-4882
Montante Cilindrico

151664882
4422015: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-115-1966
Adjusting Shaft

151151966
560-6040-015: RNCC: 3 | RNVC: 2
82-00783: RNCC: 5 | RNVC: 2

29 Nov 1992

5340-15-136-9423
Morsetto

151369423
45C26-16-14: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-124-3143
Maniglia Laterale

151243143
CT0040-032: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-115-7171
Supporto Rullo

151157171
D1401155: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-15-156-3684
Pto Plug

151563684
(241)A3460CBD71332G01: RNCC: 3 | RNVC: 2
CBD71332G01: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-156-2138
Support

151562138
(241)A3460CBD71171P02: RNCC: 3 | RNVC: 2
CBD71171P02: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-112-9721
Piastrinaguidacavo

151129721
129-0041-53-102: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-15-009-7351
Cover Plate Access

150097351
1236-16-125: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-102-3492
Helical Compression Spring Seat

151023492
25093-105: RNCC: 3 | RNVC: 2
25093-105: RNCC: 5 | RNVC: 9

12 Oct 1987

5340-15-170-3796
Cover

151703796
206-075-214-5: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-108-8863
Resiliente

151088863
VZA-R-AVU/1000: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-214-6344
Monorotaia

152146344
MONOROTAIA: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-210-4906
Serratura (Maniglia

152104906
856: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-051-3685
Gancio Per Molla

150513685
4504766: RNCC: 3 | RNVC: 2
4504766: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-068-1877
Leva

150681877
476913: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-15-193-1524
Piastra Di Montaggi

151931524
504138885: RNCC: 3 | RNVC: 2
(241)A4249504138885: RNCC: 5 | RNVC: 2

20 Apr 2010

5340-15-189-7288
Fascette Autoblocc

151897288
FPM100: RNCC: 3 | RNVC: 2

26 Feb 2010

5340-15-000-8636
Support Wall Mounti

150008636
8200401M0709: RNCC: 3 | RNVC: 2

12 Apr 2013

5340-15-170-8019
Guida Moduli Cofano

151708019
340-0241/08: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-151-9406
Double Angle Bracket

151519406
00173996: RNCC: 3 | RNVC: 2
0-173996: RNCC: 3 | RNVC: 2
(241)A39630-173996: RNCC: 5 | RNVC: 2

26 Jul 2000

5340-15-189-2249
Utility Resilient Mount

151892249
VZA-D-AV-700/4,5: RNCC: 3 | RNVC: 2

9 Feb 2010

5340-15-147-7685
Dust And Moisture Seal Protective Plug

151477685
611-0093: RNCC: 3 | RNVC: 2

6 Apr 1998

5340-15-106-9261
Moschettone E Magli

151069261
04-072-044-X-S01: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-148-8979
Mechanic Equipment Hardware Kit

151488979
PMA007: RNCC: 3 | RNVC: 2

26 Oct 1998

5340-15-181-8793
Perno Mm.20 Per Car

151818793
11373: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-060-8949
Handwheel

150608949
001314C45-38: RNCC: 3 | RNVC: 2

20 Sep 1975

5340-15-051-4213
Staffa

150514213
4548607: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-115-6092
Comple Corpo Motore

151156092
D0469146: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-115-7103
Maschera Per Dicitu

151157103
D0470411: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-156-3588
Dust Protective Cap

151563588
(241)A3460CBD71446P01: RNCC: 3 | RNVC: 2
CBD71446P01: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-144-8971
Cerniera Porta

151448971
60027: RNCC: 3 | RNVC: 2
93194654: RNCC: 5 | RNVC: 1
60027: RNCC: 5 | RNVC: 2

10 Feb 1997

5340-15-051-3659
Tassello Elastico

150513659
895803: RNCC: 3 | RNVC: 2
895803: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-211-8775
Pannello Con Panno

152118775
NB2002C: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-213-0353
Pellicola Oscurante

152130353
PL050: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-110-5337
Mounting

151105337
113.564: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-231-3350
Riparo

152313350
8019297: RNCC: 3 | RNVC: 2
534015E137559: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-176-8370
Dispositivo Guidaca

151768370
GUIDACAVO: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-148-2810
Assieme Tappo Sinis

151482810
PNE208001-003: RNCC: 3 | RNVC: 2

20 Jul 1998

5340-15-156-5214
Maniglia Mobile Car

151565214
21200077-14: RNCC: 3 | RNVC: 2

21 Feb 2003

5340-15-154-8842
Rubber Bumper

151548842
TF5558: RNCC: 3 | RNVC: 2

7 Nov 2001

5340-15-115-3017
Sopporto Destro Car

151153017
23.57.86.00: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-114-6698
Guida Complessiva

151146698
212-7600-18-3: RNCC: 3 | RNVC: 2

2 Jun 1994

5340-15-153-0933
Assieme Disco

151530933
24045GR79: RNCC: 3 | RNVC: 2
24045GR79: RNCC: 5 | RNVC: 9

21 Nov 2000

5340-15-120-1480
Assieme Tappo

151201480
200A0019-401: RNCC: 3 | RNVC: 2

16 Jan 1995

5340-15-115-6080
Compl Corpo Valvola

151156080
D0469673: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-166-5262
Bobina Filo Armonic

151665262
998004: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-074-4071
Turnbuckle

150744071
1B6UNI20180T60-2012A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-008-0695
Access Cover Plate

150080695
60107431: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-233-3229
Maniglia Con Chiave

152333229
2MANCHI001: RNCC: 3 | RNVC: 2
534015E122403: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-217-6880
Cacciavite A Taglio

152176880
111270551000: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-068-1962
Gruppo Staffaggio

150681962
644650: RNCC: 3 | RNVC: 2
644650: RNCC: 5 | RNVC: 9

27 Feb 1986

5340-15-065-0008
Piastrina

150650008
2-25E1899: RNCC: 3 | RNVC: 2

28 Aug 1979

5340-15-187-5349
Screw Thread Insert

151875349
61580-26/041: RNCC: 3 | RNVC: 2

9 Apr 2009

5340-15-120-5591
Half Hinge

151205591
109-0311-68-107: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-15-009-1896
Dust And Moisture Seal Protective Plug

150091896
109-619-35-1: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-108-8008
Metal Runner

151088008
1370097: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-166-5042
Hinge Half

151665042
311A2906003: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-215-0501
Fischer

152150501
1996: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-120-5693
Spring Tension Clip

151205693
10212: RNCC: 3 | RNVC: 2
22981216: RNCC: 5 | RNVC: 2

28 Jun 1995

5340-15-103-6264
Anchor Strap

151036264
21360064A: RNCC: 3 | RNVC: 2

26 Nov 1987

5340-15-074-4141
Turnbuckle

150744141
1D8UNI2018A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-120-6923
Cappellotto Di Ferm

151206923
D0469321: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-231-1358
Piastrina Sicurezza

152311358
4256385: RNCC: 3 | RNVC: 2
534015E075125: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-074-4397
Turnbuckle

150744397
1A22UNI2021A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-074-4060
Turnbuckle

150744060
1B30UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-158-6027
Protezione

151586027
122505462: RNCC: 3 | RNVC: 2

10 Mar 2004

5340-15-113-4661
Kitpartisciolte

151134661
PMT H3-148PARTS: RNCC: 3 | RNVC: 2

19 Jun 1991

5340-15-181-8272
Pellow Block

151818272
40-076: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-053-9456
Semicerniera Strutt

150539456
260-11-148-13: RNCC: 3 | RNVC: 2
260-11-148-13: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-114-6169
Semicerniera Compl.

151146169
129-0640-49-105: RNCC: 3 | RNVC: 2

23 Jun 1992

5340-15-120-6032
Attacco Speciale

151206032
309-5920-00: RNCC: 3 | RNVC: 2

10 Jul 1995

5340-15-154-3311
Hinge Assy

151543311
J94347318-001: RNCC: 3 | RNVC: 2

27 Apr 2001

5340-15-074-4391
Turnbuckle

150744391
1A6UNI2021A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-100-9543
Coperchio Speciale

151009543
A67534: RNCC: 3 | RNVC: 2

2 Nov 1987

5340-15-160-0800
Padlock

151600800
F720103951: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-198-7911
Pipe Bracket

151987911
60188353: RNCC: 3 | RNVC: 2

17 Nov 2004

5340-15-103-8696
Autoblo Guarnizione

151038696
4385357: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-189-9929
Kit Fissaggio Inter

151899929
T7-T7M-X1: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-009-7041
Canalina Di Giunzio

150097041
181561P1: RNCC: 3 | RNVC: 2

17 Oct 1980

5340-15-169-5228
Lucchetto Burg

151695228
F72013591: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-002-7103
Molla

150027103
1409: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-059-5626
Perno Cerniera

150595626
03974-001: RNCC: 3 | RNVC: 2

27 Mar 1976

5340-15-155-1093
Handwheel

151551093
142024330: RNCC: 3 | RNVC: 2
66263-VC192/30S-P-M6X20: RNCC: 3 | RNVC: 2

18 Jan 2002

5340-15-145-1934
Mounting Tray

151451934
A0062-C7188-W3-B1: RNCC: 3 | RNVC: 2
A0062-C7188-W3-B1: RNCC: 5 | RNVC: 2
A0062-C7188-W3-B1: RNCC: 5 | RNVC: 9

2 Jun 1997

5340-15-105-6319
Collare Serraggio

151056319
10418405: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-115-6929
Steering Wheel

151156929
D0467910: RNCC: 3 | RNVC: 2

8 Mar 1994

5340-15-074-4230
Turnbuckle

150744230
2C27UNI2019AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-202-7830
Protect Blank Panel

152027830
N651U3135201: RNCC: 3 | RNVC: 2
(241)A0126N651U3135201: RNCC: 5 | RNVC: 2

10 Jul 2007

5340-15-201-6630
Rubber Bumper

152016630
N523G5240201: RNCC: 3 | RNVC: 2
(241)A0126N523G5240201: RNCC: 5 | RNVC: 2

9 Nov 2006

5340-15-052-0563
Cerniera Completa

150520563
B910-20-54: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-041-0611
Cabratura

150410611
2-3033-100-22141-1: RNCC: 3 | RNVC: 2
2-3033-1-00-22141-1: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-221-8229
Kit Punte Attacco C

152218229
512-001-01: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-151-4376
Access Door

151514376
0-121956: RNCC: 3 | RNVC: 2
(241)A39630-121956: RNCC: 5 | RNVC: 2

25 May 2000

5340-15-174-7303
Roller

151747303
825-4012-318: RNCC: 3 | RNVC: 2
M0017174: RNCC: 5 | RNVC: 2

2 Oct 2003

5340-15-162-3360
Dust And Moisture Seal Protective Cap

151623360
EP-14: RNCC: 3 | RNVC: 2

27 Jun 2001

5340-15-183-4955
Puntali Di Gomma

151834955
COMM631023040004: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-184-7999
Piombo

151847999
NSN534015R573845: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-112-8597
Arrestoa

151128597
468260: RNCC: 3 | RNVC: 2
D0468260: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-112-8239
Piattellodia

151128239
466554: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-163-1461
Support

151631461
98475122: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-060-1672
Helical Compression Spring Seat

150601672
0RD0010: RNCC: 3 | RNVC: 2

28 Oct 1975

5340-15-162-0170
Cover

151620170
D7552.0000: RNCC: 5 | RNVC: 2
D7552.0000: RNCC: 5 | RNVC: 9

15 Nov 2000

5340-15-001-1453
Angle Bracket

150011453
D1-55084-401: RNCC: 3 | RNVC: 2

31 May 2013

5340-15-206-7994
Utility Resilient Mount

152067994
H63-146-80-92-8FF: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-153-4032
Elettro-Me Raccordo

151534032
5176-006-00: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-219-8575
Confezione Graffett

152198575
31011435: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-214-6967
Cassetta In Ferro

152146967
EXRI3108388: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-156-2006
Base

151562006
(241)A3460CBD71166P01: RNCC: 3 | RNVC: 2
CBD71166P01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-163-3615
Turnbuckle

151633615
4641651: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-181-0715
Reinforcement Ring

151810715
N925G1569201: RNCC: 3 | RNVC: 2

15 Oct 2008

5340-15-199-7998
Anello

151997998
D0475770: RNCC: 3 | RNVC: 2
(241)A0461D0475770: RNCC: 5 | RNVC: 2

7 Jun 2005

5340-15-112-3879
Pomello

151123879
B0212706: RNCC: 3 | RNVC: 2

1 Jul 1990

5340-15-101-7450
Piastra Non Forata

151017450
250X250X20DIS44125: RNCC: 3 | RNVC: 2

4 Feb 1994

5340-15-195-1613

5340-15-230-1774
Clamp

152301774
678123: RNCC: 3 | RNVC: 2
534015E149978: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-230-2421
Staffa Fissaggio Tu

152302421
74268F91: RNCC: 3 | RNVC: 2
534015E117074: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-166-5161
Rotella In Gomma Ca

151665161
2368487: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-107-8848
Dust And Moisture Seal Protective Cap-Plug

151078848
M025001083: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-067-8839
Rubber Bumper

150678839
93546-101: RNCC: 3 | RNVC: 2

26 Nov 1985

5340-15-007-6947
Anello Distanziator

150076947
50090221-320: RNCC: 5 | RNVC: 9

5 Jul 1980

5340-15-052-0420
Morsetto Serratubi

150520420
B740-20-16A: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-117-9161
Cappellotto Assieme

151179161
411A5009-401: RNCC: 3 | RNVC: 2

31 Jan 1994

5340-15-237-9127
Maniglia

152379127
B4-50-403-12: RNCC: 3 | RNVC: 2
534015E104179: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-108-1064
Ausgleichsgew

151081064
X667-13: RNCC: 3 | RNVC: 2
X667-13: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-154-5005
Sostegno Elastico

151545005
1R 541224LB: RNCC: 3 | RNVC: 2
1R 541224LB: RNCC: 5 | RNVC: 9

20 Jun 2001

5340-15-127-4430
Molla Di Spinta.

151274430
1740-16-082: RNCC: 3 | RNVC: 2
1740-16-082: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-115-2806
Guide

151152806
518052970: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-148-1893
Access Door

151481893
555530017000: RNCC: 3 | RNVC: 2

1 Jul 1998

5340-15-055-6743
Tassello Di Guida P

150556743
531950: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-118-0860
Control Rod

151180860
D0487995: RNCC: 3 | RNVC: 2

16 Dec 1994

5340-15-007-7024
Electrical-Me Post

150077024
1141-38-111: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-187-0550
Blocklatch Assy

151870550
109-0362-18-407: RNCC: 3 | RNVC: 2

9 Feb 2009

5340-15-000-2456
Dust And Moisture Seal Protective Plug

150002456
482700000/166: RNCC: 3 | RNVC: 2

12 Feb 2013

5340-15-194-0073
Half-Hinge Assembly

151940073
109-0641-51-106: RNCC: 3 | RNVC: 2

12 Aug 2010

5340-15-152-0536
Rdu 180 Re Bracket

151520536
8854 124-151: RNCC: 3 | RNVC: 2

3 Aug 2000

5340-15-175-6420
Supporto Per Pinze

151756420
157 RV17: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-118-6075
Separateur

151186075
73128398: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-116-9482
Panel

151169482
W021086: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-105-8169
Sostegno Elastico

151058169
12.504.970: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-180-7469

5340-15-112-8560
Pastiglia

151128560
467761: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-008-0426
Cover Plate Access

150080426
1235-31-903: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-138-5006
Fermo

151385006
60537576: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-111-5655
Bracket Support

151115655
01TC21564: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-148-5060
Headless Straight Rod

151485060
8868371: RNCC: 3 | RNVC: 2

13 Aug 1999

5340-15-186-9313
Quick Release Plunger

151869313
04021007: RNCC: 3 | RNVC: 2
62800273: RNCC: 5 | RNVC: 2
IMT00068: RNCC: 5 | RNVC: 2

5 Jan 2009

5340-15-186-7686
Manual Control Lever

151867686
9436113: RNCC: 3 | RNVC: 2

5 Jan 2009

5340-15-007-1966
Nut And Bolt Locking Plate

150071966
1389872: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-179-7032
Double Angle Bracket

151797032
00185320: RNCC: 3 | RNVC: 2
98185320: RNCC: 5 | RNVC: 2

7 Jun 2007

5340-15-185-5849
Cilindro Ovale Per

151855849
09010.02/54: RNCC: 3 | RNVC: 9

30 Dec 2008

5340-15-116-0234
Helical Compression Spring Seat

151160234
04.2579.035: RNCC: 3 | RNVC: 2

16 Sep 1993

5340-15-122-2103
Cage Aiguille Axe

151222103
800033718: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-213-8235
Cintino In Cotone M

152138235
2041-CC4: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-122-6531
Supporto

151226531
199949A1: RNCC: 3 | RNVC: 2

27 Sep 1996

5340-15-150-3474
Plug

151503474
60-12815-02: RNCC: 3 | RNVC: 2

29 Sep 1999

5340-15-100-3966
Cerniera Sinistra

151003966
3522 290 08670: RNCC: 3 | RNVC: 2

27 Oct 1986

5340-15-007-8104
Headless Grooved Rod

150078104
767851: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-118-2849
Supporto A Piastra

151182849
D0485464: RNCC: 3 | RNVC: 2

1 Jun 1995

5340-15-204-0457
Modular Block

152040457
G386169003: RNCC: 3 | RNVC: 2

23 Aug 2011

5340-15-159-9738
Rubber Bumper

151599738
122607233: RNCC: 3 | RNVC: 2

19 Apr 2004

5340-15-119-3163
Carter De Protectio

151193163
9431889: RNCC: 3 | RNVC: 2

11 Jul 1994

5340-15-153-9043
Threaded End Tensioning Tie Rod

151539043
9421T5: RNCC: 3 | RNVC: 2
(241)A333400084215: RNCC: 4 | RNVC: 1
00084215: RNCC: 5 | RNVC: 2

9 Mar 2001

5340-15-205-5490
Manual Control Lever

152055490
182702130: RNCC: 3 | RNVC: 2
(241)A0199182702130: RNCC: 5 | RNVC: 2

19 Mar 2012

5340-15-146-2744
Lucchetto Marca Vir

151462744
534015C000002: RNCC: 3 | RNVC: 2

11 Jul 1997

5340-15-206-5484
Anello Di Spallamen

152065484
04-10-2354-35-C3: RNCC: 3 | RNVC: 2
(241)A098404-10-2354-35-C3: RNCC: 5 | RNVC: 2

25 Jun 2012

5340-15-187-6495
Roddoor Latch

151876495
109-0362-23-208: RNCC: 3 | RNVC: 2
(241)A0126109-0362-23-208: RNCC: 5 | RNVC: 2

15 Apr 2009

5340-15-074-4153
Turnbuckle

150744153
2D10UNI2018ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-060-4644
Electrical-Me Post

150604644
1127-20-151: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-003-2573
Hinge1. An Item Con

150032573
MS20001Y5-788: RNCC: 3 | RNVC: 2

31 Oct 2013

5340-15-194-8728
Breather

151948728
70052: RNCC: 3 | RNVC: 2
10/906403: RNCC: 5 | RNVC: 2

27 Jan 2011

5340-15-186-9310
Dust And Moisture Seal Protective Cover

151869310
04031041: RNCC: 3 | RNVC: 2

5 Jan 2009

5340-15-108-8630
Dust And Moisture Seal Protective Cap

151088630
360/RSVM65-280A/OR-553667: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-112-2669
Helical Compression Spring Seat

151122669
773147: RNCC: 3 | RNVC: 2

30 Apr 1988

5340-15-178-0303
Grooved Clamp Coupling

151780303
3472B2603603: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-15-178-9534
Mechanic Equipment Hardware Kit

151789534
326010.110: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-15-002-5980
Double Angle Bracket

150025980
5801359837: RNCC: 3 | RNVC: 2

4 Sep 2013

5340-15-040-8306
Fascetta

150408306
7-4411-200-32688-1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-109-5307
Dust And Moisture Seal Protective Plug

151095307
GB488-007-000: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-151-6790
Elementi Intermedia

151516790
4461576: RNCC: 3 | RNVC: 2

27 Jun 2000

5340-15-179-6083
Key Blank

151796083
EU5R: RNCC: 3 | RNVC: 2

11 Apr 2007

5340-15-156-3612
Support Angular

151563612
(241)A3460CBD71444P01: RNCC: 3 | RNVC: 2
CBD71444P01: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-203-4488
Set Angle Assembly

152034488
N523G5423051: RNCC: 3 | RNVC: 2
(241)A0126N523G5423051: RNCC: 5 | RNVC: 2

3 Feb 2008

5340-15-006-6377
Clamp Loop

150066377
121813: RNCC: 3 | RNVC: 2

24 Nov 1979

5340-15-215-0274
Ruota Girevole

152150274
657604: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-211-4398
Tappo A Lamelle

152114398
576030: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-074-4101
Turnbuckle

150744101
1C20UNI2018A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-103-0221
Dust And Moisture Seal Protective Plug

151030221
563024: RNCC: 3 | RNVC: 2

21 Jun 1987

5340-15-045-3154
Control Rod

150453154
506-32-01: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-105-0019
Helical Compression Spring Retainer

151050019
301-02-1720: RNCC: 3 | RNVC: 2

14 Apr 1987

5340-15-117-8210
Clip Assy

151178210
109-0516-85-101: RNCC: 3 | RNVC: 2

28 Jan 1994

5340-15-006-7617
Clamp

150067617
120051: RNCC: 3 | RNVC: 2

24 Nov 1979

5340-15-115-2746
Rest

151152746
518051830: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-115-2789
Cylinder

151152789
518053030: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-170-2601
Handle Left

151702601
79050879: RNCC: 3 | RNVC: 2
(241)AD75179050879: RNCC: 5 | RNVC: 2
79050879: RNCC: 5 | RNVC: 2

12 Nov 2002

5340-15-134-5254
Supporto Apparato U

151345254
511559-801: RNCC: 3 | RNVC: 2
511559-801: RNCC: 5 | RNVC: 9

9 Oct 1996

5340-15-169-6130
Lucchetto C.

151696130
F72015691: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-122-1561
Control Rod

151221561
095C0115-01: RNCC: 3 | RNVC: 2
095C0115-01: RNCC: 5 | RNVC: 9

21 May 1996

5340-15-193-6918
Support Plate

151936918
109-0714-99-101: RNCC: 3 | RNVC: 2

30 Jun 2010

5340-15-008-9999
Ritegno Trasparente

150089999
109-0310-27-20: RNCC: 3 | RNVC: 2

11 Jun 1981

5340-15-114-3217
Maniglia Speciale

151143217
CF480488: RNCC: 3 | RNVC: 2

4 Jun 1992

5340-15-170-7672
Thermoconductive Pl

151707672
340-0768/02: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-166-5111
Tassello

151665111
SBS84: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-148-9140
Speciale Anello

151489140
PNE301001-005: RNCC: 3 | RNVC: 2

29 Oct 1998

5340-15-042-2789
Fermaglio Speciale

150422789
6547-12: RNCC: 3 | RNVC: 2

20 Jul 1972

5340-15-117-4084
Puntalino Prima Seg

151174084
D0466468: RNCC: 3 | RNVC: 2

6 Apr 1994

5340-15-122-3934
Ritegno Anteriore

151223934
D1404958: RNCC: 3 | RNVC: 2

20 Jun 2000

5340-15-193-6877
Tie Rod

151936877
E10TK042A: RNCC: 3 | RNVC: 2

30 Jun 2010

5340-15-152-1953
Tappo Di Gomma

151521953
14673080: RNCC: 3 | RNVC: 2

9 Aug 2000

5340-15-204-9591
Raccordo

152049591
108000000181: RNCC: 3 | RNVC: 2
(241)AK136108000000181: RNCC: 5 | RNVC: 2

2 Feb 2012

5340-15-212-5040
Fascette A Vite 25X

152125040
A103109: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-218-2275
Fustella A Cavallot

152182275
ALFA524MM14: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-007-3755
Piastra Speciale

150073755
0-34068: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-109-5303
Dust And Moisture Seal Protective Plug

151095303
GB488-004-000: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-204-7553
Angle Bracket

152047553
109-0518-83-101: RNCC: 3 | RNVC: 2

22 Dec 2011

5340-15-112-0212
Dust And Moisture Seal Protective Plug

151120212
GB488-018-000: RNCC: 3 | RNVC: 2

15 Mar 1991

5340-15-117-4068
Corpo Rubinetto Spe

151174068
D0466496: RNCC: 3 | RNVC: 2

6 Apr 1994

5340-15-198-5064
Barra Paraincastro

151985064
030193: RNCC: 3 | RNVC: 2
(241)A3593030193: RNCC: 5 | RNVC: 2

7 Oct 2004

5340-15-118-0330
Flangia Con Sede Va

151180330
467833: RNCC: 3 | RNVC: 2
D0467833: RNCC: 3 | RNVC: 2

14 Dec 1994

5340-15-236-5696
Guida

152365696
GU 32: RNCC: 3 | RNVC: 2
534015E117622: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-103-2088
Flangia Speciale

151032088
L3800024: RNCC: 3 | RNVC: 2
DE160.03.194: RNCC: 5 | RNVC: 2
(241)A5015DE160.03.194: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-112-0508
Dispositivo Di Supp

151120508
244A2123-401: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-108-6212
Control Rod

151086212
60141838: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-120-6763
Piastrina Forata Pe

151206763
D1401542: RNCC: 3 | RNVC: 2

29 Jun 1996

5340-15-134-4743
Staffa Fissaggio

151344743
10115905: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-180-3232
Piastra Di Montaggi

151803232
(241)A4249504094910: RNCC: 3 | RNVC: 2
504094910: RNCC: 3 | RNVC: 2

18 Apr 2008

5340-15-166-5005
Supporto Attuatore

151665005
77342021: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-055-6752
Squadretta Per Atta

150556752
532381: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-179-9510
Biconic

151799510
16507614: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-123-5694
Tappo Per Giunto Ra

151235694
99A962P002: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-151-7511
Dispositivo Di Sicu

151517511
A1102100: RNCC: 3 | RNVC: 2

5 Jul 2000

5340-15-103-2015
Snodo Lamierino

151032015
DE160.02.050: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-214-9364
Cassetta Assortimen

152149364
E210100: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-141-4406
Anodo

151414406
W012033: RNCC: 3 | RNVC: 2
(7001)5340151414406: RNCC: 5 | RNVC: 2

9 Jun 1997

5340-15-104-8897
Fissaggio Gaffetta

151048897
899252: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-162-1723
Eye End

151621723
291A10050-103: RNCC: 3 | RNVC: 2

3 Apr 2001

5340-15-178-3016
Anode Clamp

151783016
MH-A633-0001-03: RNCC: 3 | RNVC: 2

29 Apr 2005

5340-15-205-0211
Tampone Ammortizzat

152050211
PWHS06340-08F200: RNCC: 3 | RNVC: 2
159132155: RNCC: 5 | RNVC: 2
(241)AH798PWHS06340-08F200: RNCC: 5 | RNVC: 2

13 Feb 2012

5340-15-202-4635
Snap Hook

152024635
8963001: RNCC: 3 | RNVC: 2
(241)A57628963001: RNCC: 5 | RNVC: 2

2 Apr 2007

5340-15-219-7241
Staffa Universale

152197241
600 50 40: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-230-1777
Clamp

152301777
677422: RNCC: 3 | RNVC: 2
534015E149981: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-149-6097
Clamp

151496097
518-10-1390: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-150-5868
Coperchio

151505868
A37585-01-08: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-15-177-5894
Fermatubo

151775894
075054015: RNCC: 3 | RNVC: 2

13 May 2004

5340-15-205-4947
Dust And Moisture Seal Protective Cap-Plug

152054947
182702013: RNCC: 3 | RNVC: 2
(241)A0199182702013: RNCC: 5 | RNVC: 2

14 Mar 2012

5340-15-068-3301
Guida Di Supporto

150683301
OD089N058: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-045-0376
Control Rod

150450376
1109: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-051-4109
Anello

150514109
4007434: RNCC: 3 | RNVC: 2
4007434: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-122-5497
Hing Pivot

151225497
01TL21270: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-138-6554
Staffa Sostegno Est

151386554
2909-5: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-202-2316
Rod Assy

152022316
233A1003-409: RNCC: 3 | RNVC: 2
(241)A0019233A1003-409: RNCC: 5 | RNVC: 2

13 Feb 2007

5340-15-134-4211
Semiasta Femmina

151344211
93544-101: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-166-4795
Wash

151664795
3412758: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-006-2710
Anello Speciale

150062710
0-33759: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-180-1373
Metalic Grommet

151801373
127H-4: RNCC: 3 | RNVC: 2

28 Jan 2008

5340-15-207-5975
Dust And Moisture Seal Protective Cap-Plug

152075975
178940165: RNCC: 3 | RNVC: 2
(241)A3936178940165: RNCC: 5 | RNVC: 2

5 Nov 2012

5340-15-045-3616
Anello

150453616
751-12-70-04: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-162-2789
Dust And Moisture Seal Protective Cap

151622789
EP10: RNCC: 3 | RNVC: 2

4 Jun 2001

5340-15-212-1428
Lucchetto Da Mm 20

152121428
LUCCHETTOMM20: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-137-3203
Camma

151373203
S6121-62851-14: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-006-9314
Estremita Complessi

150069314
506-25-09A: RNCC: 3 | RNVC: 2

2 Jan 1979

5340-15-120-5590
Half Hinge

151205590
109-0311-68-105: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-15-199-5523
Complessi Maniglia

151995523
541-33-0120: RNCC: 3 | RNVC: 2
(241)A1140541-33-0120: RNCC: 5 | RNVC: 2

20 Apr 2005

5340-15-003-5299
Nut And Bolt Locking Plate

150035299
4548371: RNCC: 3 | RNVC: 2
4548371: RNCC: 5 | RNVC: 2

10 Apr 1974

5340-15-000-2764
Turnbuckle

150002764
040.TBP00034: RNCC: 3 | RNVC: 2

13 Feb 2013

5340-15-119-1537
Helical Compression Spring Seat

151191537
73126652: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-180-9870
Multiple Angle Bracket

151809870
095752002: RNCC: 3 | RNVC: 2
(241)A1782095752002: RNCC: 5 | RNVC: 2

12 Sep 2008

5340-15-137-3747
Anello

151373747
V19255: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-112-5387
Handle

151125387
01TC22236: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-160-7039
Lucchetto Burg

151607039
F720135911: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-204-3254
Tampone

152043254
0000500429921: RNCC: 3 | RNVC: 2
(241)A39630000500429921: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-060-3725
Nut And Bolt Locking Plate

150603725
12151-11: RNCC: 3 | RNVC: 2

16 Oct 1976

5340-15-179-0460
Key Storage

151790460
091310-01-01: RNCC: 3 | RNVC: 2

20 Apr 2006

5340-15-178-7500
Crochet

151787500
012609BB: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-103-4157
Bush

151034157
277281ART32: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-170-8697
Ferula 128 Monomodo

151708697
67382-64/101: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-001-7958
Angle Bracket

150017958
5949791210: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-063-3218
Double Angle Bracket

150633218
60107878: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-148-7488
Saltarello

151487488
2104-0013-001: RNCC: 3 | RNVC: 2

30 Sep 1998

5340-15-115-2197
Clamp

151152197
TF3M: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-118-5594
Muta Giunti Elastic

151185594
D1005627: RNCC: 3 | RNVC: 2

30 Jun 1994

5340-15-191-9237
Rullo

151919237
RULLO1: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-174-7327
Wing Dismount. Kit

151747327
825-4012-339: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-153-5019
Half Hinge

151535019
J57140703-002: RNCC: 3 | RNVC: 2

5 Feb 2001

5340-15-182-6116
Attacco

151826116
34-000-21998: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-181-1158
Head

151811158
OO201027: RNCC: 3 | RNVC: 2
(241)A4912OO201027: RNCC: 5 | RNVC: 2

29 Oct 2008

5340-15-231-2288
Tassello Elastico

152312288
82488940: RNCC: 3 | RNVC: 2
534015E125430: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-059-6563
Resilient Mount

150596563
741092M: RNCC: 3 | RNVC: 2
1127-19-266: RNCC: 5 | RNVC: 2

16 Nov 1987

5340-15-138-5808
Tassello

151385808
82310117: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-137-8769
Appoggio Crick

151378769
1836GR101: RNCC: 3 | RNVC: 2
1836GR101: RNCC: 5 | RNVC: 9

10 Oct 1996

5340-15-053-8671
Dust And Moisture Seal Protective Cap

150538671
A105066: RNCC: 3 | RNVC: 2
A105066: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-213-7603
Maniglione Antipani

152137603
59000-10: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-121-9054
Dispositivo Di Bloc

151219054
71-625-SS: RNCC: 3 | RNVC: 2
142502069: RNCC: 5 | RNVC: 2

19 Mar 1996

5340-15-122-1970
Plug

151221970
TA743: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-205-5494
Dust And Moisture Seal Protective Cap-Plug

152055494
182702138: RNCC: 3 | RNVC: 2
(241)A0199182702138: RNCC: 5 | RNVC: 2

19 Mar 2012

5340-15-151-7548
Hinge Assembly

151517548
J52850200-402: RNCC: 3 | RNVC: 2

5 Jul 2000

5340-15-127-4438
Anello

151274438
1740-16-070: RNCC: 3 | RNVC: 2
1740-16-070: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-203-8365
Gancio Ad Anello

152038365
9311514110000: RNCC: 3 | RNVC: 2
(241)A99419311514110000: RNCC: 5 | RNVC: 2

5 Jul 2011

5340-15-218-2273
Fustella A Cavallot

152182273
ALFA524MM12: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-116-8496
Cilindro Supporto

151168496
D1402596: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-15-122-2341
Molette Tendeur

151222341
8A0067355: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-139-3658
Collare Fissaggio

151393658
41822730: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-115-5458
Supporto Microswitc

151155458
D0471835: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-115-5411
Control Rod

151155411
D0469599: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-002-7737
Flangia Fissaggio

150027737
21304: RNCC: 3 | RNVC: 2

1 Oct 2013

5340-15-136-1014
Supporto

151361014
9647648: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-065-8269
Controcoppa

150658269
2058/22/28: RNCC: 3 | RNVC: 2

4 Sep 1985

5340-15-100-8172
Helical Compression Spring Seat

151008172
20390739A: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-060-2535
Nut And Bolt Locking Plate

150602535
1377-97: RNCC: 3 | RNVC: 2

4 Dec 1976

5340-15-009-6390
Traversa

150096390
159320G2: RNCC: 3 | RNVC: 2

17 Oct 1980

5340-15-207-1967
Stop Washer

152071967
R0085989: RNCC: 2 | RNVC: 2
(241)AG350R0085989: RNCC: 5 | RNVC: 2

20 Sep 2012

5340-15-232-0249
Fascetta

152320249
186009: RNCC: 3 | RNVC: 2
534015E142865: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-204-2068
Paracolpo Gomma

152042068
163114030: RNCC: 3 | RNVC: 2
(241)A0199163114030: RNCC: 5 | RNVC: 2

26 Sep 2011

5340-15-166-4746
Cap

151664746
FEC00311616: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-116-8499
Cilindro Supporto

151168499
D1402585: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-15-106-7333
Tubazioni Co Staffa

151067333
838941: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-136-1015
Cerniera

151361015
9066702: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-074-3671
Turnbuckle

150743671
2C16UNI2021AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-009-9005
Cover Plate Access

150099005
1236-19-100: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-155-0885
Nut And Bo Retainer

151550885
J57150108-003: RNCC: 3 | RNVC: 2

17 Jan 2002

5340-15-106-0405
Colonnetta

151060405
503-03-3251: RNCC: 5 | RNVC: 2
503-03-3251: RNCC: 5 | RNVC: 9

30 May 1989

5340-15-148-9144
Anello Raschiaolio

151489144
PNE301018-001: RNCC: 3 | RNVC: 2

29 Oct 1998

5340-15-157-9828
Hinge Half

151579828
J94345403-001: RNCC: 3 | RNVC: 2

14 Dec 2003

5340-15-139-7974
Catenella Completa

151397974
1001700: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-115-7131
Flangia Tubo Misura

151157131
D1401486: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-15-179-4401
Helical Compression Spring Seat

151794401
46186206: RNCC: 3 | RNVC: 2

28 Nov 2006

5340-15-149-1182
Staffa

151491182
60187795: RNCC: 3 | RNVC: 2

2 Dec 1998

5340-15-114-0354
Adattoreperattrezzo

151140354
369D22000-1503-B-99906: RNCC: 3 | RNVC: 2

15 Apr 1992

5340-15-198-8972
Special Plate

151988972
26HJ04143041S01-421: RNCC: 3 | RNVC: 2

25 Nov 2004

5340-15-158-3536
Helical Compression Spring Seat

151583536
22253/X: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-15-198-5065
Barra Paraincastro

151985065
030194: RNCC: 3 | RNVC: 2
(241)A3593030194: RNCC: 5 | RNVC: 2

7 Oct 2004

5340-15-178-9948
Cover

151789948
RS 404 857 BU: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-122-2617
Tampon Caoutchouc

151222617
800033777: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-163-0907
Resilient Mount

151630907
MM350: RNCC: 3 | RNVC: 2
(241)A3290MM350: RNCC: 5 | RNVC: 2

21 Jun 2002

5340-15-193-5749
Staffa Per Tubazion

151935749
STAFFAREGGITUBODIAM032: RNCC: 3 | RNVC: 2
(241)AD841STAFFAREGGITUBODIAM032: RNCC: 5 | RNVC: 2

15 Jun 2010

5340-15-120-6804
Piastra Collegament

151206804
D0487618: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-055-6462
Turnbuckle

150556462
1304-1-59: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-231-1143
Lucchetto Corazzato

152311143
4016: RNCC: 3 | RNVC: 2
534015E089899: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-114-6216
Supporto Per Casset

151146216
165097107: RNCC: 3 | RNVC: 2

23 Jun 1992

5340-15-181-5769
Asta Filettata As-M

151815769
2020302: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-064-8281
Helical Compression Spring Seat

150648281
002.9215.0/10: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-116-0352
Tronchetto Tubo Usc

151160352
TUC-140-120-80: RNCC: 3 | RNVC: 2

7 Oct 1994

5340-15-222-2290
Porta Roller Shutte

152222290
S1-13B2: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-145-0470
Extension

151450470
109-0715-70-109: RNCC: 3 | RNVC: 2

28 Mar 1997

5340-15-068-2308
Anchor Strap

150682308
W011532: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-074-4317
Turnbuckle

150744317
1B56UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-129-0476
Circlip

151290476
5T3623N9: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-215-3718
Ganascia Per Morsa

152153718
GANASCIA150MM.: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-115-2336
Hand Lever

151152336
518023620: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-166-5202
Serratura Elettrica

151665202
11931502: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-187-4467
Turnbuckle

151874467
109-3110-06-117: RNCC: 3 | RNVC: 2

31 Mar 2009

5340-15-234-3440
Semicerniera In All

152343440
15-45-061/05: RNCC: 3 | RNVC: 2
534015E074550: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-206-7853
Yoke Bumper

152067853
4232155-00: RNCC: 3 | RNVC: 2

20 Jul 2012

5340-15-110-0330
Spinadiarresto

151100330
27180-101A00: RNCC: 3 | RNVC: 2
27180-101: RNCC: 5 | RNVC: 2

16 Mar 1990

5340-15-198-8120
Pipe Bracket

151988120
60148702: RNCC: 3 | RNVC: 2

17 Nov 2004

5340-15-007-9320
Support

150079320
4435265: RNCC: 3 | RNVC: 2
4435265: RNCC: 5 | RNVC: 9

1 Mar 1980

5340-15-065-7211
Compre Helical Seat

150657211
500.6410.036: RNCC: 3 | RNVC: 2

4 Jun 1985

5340-15-103-4393
Clamp

151034393
8897600: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-068-6460
Cover Plate Access

150686460
W010653: RNCC: 3 | RNVC: 2
(7001)5340150686460: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-009-8390
Snap Hook

150098390
04-089-446: RNCC: 3 | RNVC: 2

1 Jul 1989

5340-15-213-8853
Cerniera A Goccia G

152138853
415R-IBFM: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-141-3200
Attacco Metallico P

151413200
F-75: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-203-6698
Support

152036698
NTA23752-1: RNCC: 3 | RNVC: 2

24 Jun 2011

5340-15-117-7280
Control Rod

151177280
142502925: RNCC: 3 | RNVC: 2

13 Jan 1994

5340-15-154-2065
Double Angle Bracket

151542065
0-168734: RNCC: 3 | RNVC: 2
(241)A39630-168734: RNCC: 5 | RNVC: 2
1PA39630-168734: RNCC: 5 | RNVC: 2

28 Mar 2001

5340-15-115-6932
Handwheel

151156932
D0467979: RNCC: 3 | RNVC: 2

8 Mar 1994

5340-15-115-6938
Control Rod

151156938
D1401161: RNCC: 3 | RNVC: 2

8 Mar 1994

5340-15-189-2548
Manual Control Lever

151892548
0052008720: RNCC: 3 | RNVC: 2
0052008720: RNCC: 5 | RNVC: 2
0052008720: RNCC: 5 | RNVC: 2

10 Feb 2010

5340-15-193-1530
Access Door Locking Ring

151931530
504139338: RNCC: 3 | RNVC: 2
(241)A4249504139338: RNCC: 5 | RNVC: 2

20 Apr 2010

5340-15-175-8414
Chiudiporta Yale

151758414
90304: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-193-2321
Angle Bracket

151932321
504159697: RNCC: 3 | RNVC: 2
(241)A4249504159697: RNCC: 5 | RNVC: 2

22 Apr 2010

5340-15-150-5268
Access Cover

151505268
157638178: RNCC: 3 | RNVC: 2

12 Jan 2000

5340-15-179-0038
Plate

151790038
RS 413 793 A: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-212-7655
Battuta

152127655
454-0104: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-121-6302
Plaque Frein

151216302
800035793: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-192-4131
Main Bearing Puller

151924131
68400008A: RNCC: 3 | RNVC: 2

16 Mar 2010

5340-15-102-2797
Gruppo Staffaggio

151022797
645768: RNCC: 3 | RNVC: 2
645768: RNCC: 5 | RNVC: 9

18 Feb 1988

5340-15-110-2820
Bracket Ang

151102820
P135241-002: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-122-5563
Left Panel

151225563
01TL21027-01: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-041-8086
Terminale

150418086
5-1925-101-45582: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-201-9685
Turnbuckle Body

152019685
10092511: RNCC: 3 | RNVC: 2
10092511: RNCC: 5 | RNVC: 2
(241)AD75110092511: RNCC: 5 | RNVC: 2

17 Jan 2007

5340-15-213-8407
Lucchetto A Cavo

152138407
LUCCHETTO PER BICI: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-231-1112
Contropiastra Per S

152311112
06231: RNCC: 3 | RNVC: 2
534015E066566: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-074-4359
Turnbuckle

150744359
1C45UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-203-2099
Resilient Mount

152032099
SNT0010P: RNCC: 3 | RNVC: 2
(241)AG541SNT0010P: RNCC: 5 | RNVC: 2

29 Nov 2007

5340-15-109-3551
Anellospeciale

151093551
OP-08.50: RNCC: 3 | RNVC: 2

16 Oct 1989

5340-15-222-2312
Montante 2 Ipe 400

152222312
S1-135A: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-003-5034
Staffa

150035034
4030165: RNCC: 3 | RNVC: 2
4030165: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-125-4595
Lucchetto Di Sicure

151254595
VIROPANZERGRANDE: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-187-5344
Screw Thread Insert

151875344
61580-25/001: RNCC: 3 | RNVC: 2

9 Apr 2009

5340-15-231-8777
Tirante

152318777
2464815: RNCC: 3 | RNVC: 2
534015E095167: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-199-5191
Access Door

151995191
122510185: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-15-156-2025
Assy Base

151562025
(241)A3460CBD71134G01: RNCC: 3 | RNVC: 2
CBD71134G01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-106-7583
Staffetta

151067583
982310: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-169-3298
Lucchetto C.

151693298
F72010653: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-005-1552
Clamp

150051552
325C63-340SH: RNCC: 3 | RNVC: 2

9 Dec 2013

5340-15-174-7463
Esagono Ott.5P-Ot58

151747463
53240-12/005: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-008-6391
Resilient Mount

150086391
AA/30: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-105-5501
Dado E Bullon Fermo

151055501
807.5480.000: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-121-9027
Supporto Speciale C

151219027
142501913: RNCC: 3 | RNVC: 2

19 Mar 1996

5340-15-006-4295
Rim Clen Clamp (1)

150064295
4408619: RNCC: 3 | RNVC: 2
4408619: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-112-8231
Bustaantir

151128231
466434: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-119-7373
Handwheel

151197373
01TL23350: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-051-3683
Staffa

150513683
4506838: RNCC: 3 | RNVC: 2
4506838: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-197-8815
Antivibrante

151978815
MG10: RNCC: 3 | RNVC: 2

24 May 2004

5340-15-202-9271
Retainer For Thread

152029271
A919AAF: RNCC: 3 | RNVC: 2
(241)A0126A919AAF: RNCC: 5 | RNVC: 2

27 Sep 2007

5340-15-166-5107
Gancio Per Pannello

151665107
555181: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-105-5990
Staffa A Gomito

151055990
981019: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-194-7849
Pomello Bloccaggio

151947849
52118: RNCC: 3 | RNVC: 2
(241)A348852118: RNCC: 5 | RNVC: 2

14 Jan 2011

5340-15-106-4211
Piastrina

151064211
979514: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-220-5900
Cilindro L70 Cisa 3

152205900
CILINDROL70: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-157-3706
A Cover And Gasket

151573706
190509971: RNCC: 1 | RNVC: 3

4 Jul 2003

5340-15-074-4422
Turnbuckle

150744422
1B27UNI2021A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-201-3768
Turnbuckle

152013768
3340129: RNCC: 3 | RNVC: 2
(241)A9840SPC2240042: RNCC: 5 | RNVC: 2
SPC2240042: RNCC: 5 | RNVC: 2

30 Jul 2006

5340-15-105-8900
Pattino Metallico

151058900
27-159-69: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-192-7578
Circlip

151927578
CAT331: RNCC: 3 | RNVC: 2

26 Mar 2010

5340-15-112-1143
Sostegnoe

151121143
H48-127-38-47-10MM8: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-153-9245
Tirante A Teste Fil

151539245
834030: RNCC: 2 | RNVC: 3
142006180: RNCC: 5 | RNVC: 3

12 Mar 2001

5340-15-062-8531
Fibbia A D Con Trav

150628531
413029890: RNCC: 3 | RNVC: 2
413029890: RNCC: 3 | RNVC: 2

27 Oct 1982

5340-15-231-5713
Viteria E Bulloneri

152315713
534015E138165: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-195-0148
Ol Protective Cover

151950148
CBD71633P01: RNCC: 3 | RNVC: 2
(241)A3460CBD71633P01: RNCC: 5 | RNVC: 2

16 Feb 2011

5340-15-139-4015
Tassello

151394015
4533993: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-065-9165
Hose

150659165
4695132: RNCC: 3 | RNVC: 2

22 Nov 1983

5340-15-115-7104
Maschera Per Dicitu

151157104
D0470614: RNCC: 3 | RNVC: 2

14 Mar 1994

Load More Results