What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 50 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 50 of 72

5340-15-207-3320
Rod Retainer Clip

152073320
3308154M1: RNCC: 3 | RNVC: 2

9 Oct 2012

5340-15-203-8807
Avvolgitore Per Tap

152038807
2010FGO: RNCC: 3 | RNVC: 2
(241)AD4452010FGO: RNCC: 5 | RNVC: 2

13 Jul 2011

5340-15-068-2299
Anchor Strap

150682299
W011569: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-115-5559
Threaded End Tensioning Tie Rod

151155559
999-0505-08-101: RNCC: 3 | RNVC: 2

3 Oct 1995

5340-15-109-3447
Coperchio Di Access

151093447
03-06-258-11: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-110-3819
Haltebuegel

151103819
F294B2-69: RNCC: 3 | RNVC: 2
F294B2-69: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-054-4384
Snap Hook

150544384
04-12525-11: RNCC: 3 | RNVC: 2
04-12525-11: RNCC: 5 | RNVC: 9

18 Nov 1971

5340-15-215-3776
Manicotto Per Tubo

152153776
GU-191CA0: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-103-1940
Piastra Appoggio

151031940
DE013.13.255: RNCC: 3 | RNVC: 2
(241)A5015DE013.13.255: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-110-4355
Dirt And Liquid Deflector

151104355
1300000510: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-188-0846
Dust And Moisture Seal Protective Cap-Plug

151880846
157611185: RNCC: 3 | RNVC: 2

2 Jul 2009

5340-15-120-6810
Piastr Portaboccola

151206810
D0487373: RNCC: 3 | RNVC: 2

10 Jul 1996

5340-15-113-0337
Puleggia

151130337
129-0041-42-105: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-15-149-2631
Guida Speciale Per

151492631
28032-14: RNCC: 3 | RNVC: 2
28032-14: RNCC: 5 | RNVC: 9

26 Jan 1999

5340-15-220-0524
Trave Inclinata Ipe

152200524
S1-112C: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-054-3716
Staffa Destra

150543716
526053: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-122-2531
Fond De Jante Avant

151222531
800013346: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-214-3942
Bracket

152143942
UMS-24-25: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-121-5681
Anodo Anticorrosion

151215681
1P 549956: RNCC: 3 | RNVC: 2
3.2403-R9-10: RNCC: 3 | RNVC: 2
1P 549956: RNCC: 5 | RNVC: 9

17 Sep 1996

5340-15-008-2739
Clamp

150082739
109-0705-45-3: RNCC: 3 | RNVC: 2

7 Jan 1982

5340-15-100-8713
Coperchio A Piastra

151008713
D0478498: RNCC: 3 | RNVC: 2
478498: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-063-9226
Resilient Mount

150639226
2640-71010: RNCC: 3 | RNVC: 2
2640-71010: RNCC: 5 | RNVC: 9

6 Dec 1982

5340-15-118-2617
Metal Runner

151182617
D1404664: RNCC: 3 | RNVC: 2

11 Apr 1995

5340-15-108-4273
Helical Compression Spring Seat

151084273
4628568: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-15-000-9327
Speciale Scontro

150009327
102711130: RNCC: 3 | RNVC: 2

29 Apr 2013

5340-15-201-6188
Gancetto Inox

152016188
GNC29: RNCC: 3 | RNVC: 2

30 Oct 2006

5340-15-151-4591
Fissaggio Pinza Uni

151514591
UOHF0150000: RNCC: 3 | RNVC: 2

29 May 2000

5340-15-187-3395
Tampone Ammortizzat

151873395
040872: RNCC: 3 | RNVC: 2
(241)A3593040872: RNCC: 5 | RNVC: 2

17 Mar 2009

5340-15-151-1902
Shock Mount Pad

151511902
UXGS0030500: RNCC: 3 | RNVC: 2

14 Apr 2000

5340-15-170-3358
Clamp

151703358
206-031-134-17: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-045-3920
Fascetta

150453920
N0R4-110-01-12: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-166-4996
Hinge Half

151664996
216A8006001: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-147-5771
Steun

151475771
982150122: RNCC: 3 | RNVC: 2

30 Dec 1997

5340-15-166-4892
Gancio Orientabile

151664892
552083: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-201-0418
Coperchio Di Protez

152010418
N632U6014201: RNCC: 3 | RNVC: 2
(241)A0126N632U6014201: RNCC: 5 | RNVC: 2

15 May 2006

5340-15-134-4941
Staffe Con Perno Pi

151344941
8515413: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-163-1426
Support

151631426
7752339: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-166-5062
Housing

151665062
31392001: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-177-4266
Manual Control Handle

151774266
049431: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-105-8077
Ammortizzatore Idra

151058077
14200: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-157-7104
Turnbuckle

151577104
TENDITORE 20MM ACCIAIO: RNCC: 3 | RNVC: 2

16 Oct 2003

5340-15-112-1371
Supportoperc

151121371
DE013.15.274: RNCC: 3 | RNVC: 2
(241)A5015DE013.15.274: RNCC: 5 | RNVC: 2

12 Feb 1991

5340-15-116-8593
Speciale Supporto

151168593
D0468177: RNCC: 3 | RNVC: 2

8 Apr 1994

5340-15-166-4833
Guida

151664833
412900048101: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-152-6773
Staffa

151526773
0-166523: RNCC: 3 | RNVC: 2

10 Oct 2000

5340-15-109-7287
Helical Compression Spring Seat

151097287
773843: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-187-4670
Lug Terminal

151874670
503631: RNCC: 3 | RNVC: 2
(241)AB018503631: RNCC: 5 | RNVC: 2

2 Apr 2009

5340-15-003-1072
Nut And Bolt Locking Plate

150031072
182719636: RNCC: 3 | RNVC: 2
(241)A0199182719636: RNCC: 5 | RNVC: 2

25 Oct 2013

5340-15-163-0968
Dust And Moisture Seal Protective Plug

151630968
A3216-G2: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-103-0745
Dust And Moisture Seal Protective Cap-Plug

151030745
L2125099: RNCC: 3 | RNVC: 2
DE160.03.079: RNCC: 5 | RNVC: 2
(241)A5015DE160.03.079: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-109-1929
Helical Compression Spring Seat

151091929
8856935: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-002-9263
Dust And Moisture Seal Protective Cap-Plug

150029263
102318: RNCC: 3 | RNVC: 2
(241)A3593102318: RNCC: 5 | RNVC: 2

18 Oct 2013

5340-15-056-6045
Bandella Trasversal

150566045
15985: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-174-7428
Film Sottile Per 14

151747428
345-0116/01.02: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-007-5230
Cover Plate Access

150075230
1239-01-019: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-220-0466
Rondella Diam.Spec.

152200466
S1-74D: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-068-4913
Cover Plate Access

150684913
2882-23: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-068-1873
Boccola Speciale

150681873
476905: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-15-219-8577
Lame Ricambio

152198577
30218943: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-118-0461
Bullone Prigioniero

151180461
D0487837: RNCC: 3 | RNVC: 2

18 Nov 1994

5340-15-232-0280
Tappo

152320280
182516: RNCC: 3 | RNVC: 2
534015E142843: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-133-1123
Cerniera

151331123
0137754: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-002-3134
Multiple Angle Bracket

150023134
504382228: RNCC: 3 | RNVC: 2

6 Aug 2013

5340-15-152-1051
Dust And Moisture Seal Protective Plug

151521051
60139294: RNCC: 3 | RNVC: 2

7 Aug 2000

5340-15-105-6334
Collare Serraggio

151056334
4628548: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-151-4644
Bloccaggio Ruota De

151514644
NAMS0171100: RNCC: 3 | RNVC: 2

29 May 2000

5340-15-127-5619
Molla Innesto Avvia

151275619
896028: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-120-6712
Control Rod

151206712
D0491540: RNCC: 3 | RNVC: 2

28 Jun 1996

5340-15-230-1773
Assembly Clip

152301773
678122: RNCC: 3 | RNVC: 2
534015E149977: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-114-2646
Scaricatore

151142646
83471601: RNCC: 3 | RNVC: 2
83471601: RNCC: 5 | RNVC: 9

26 May 1992

5340-15-151-4641
Bloccaggio Astina

151514641
NAMS0170800: RNCC: 3 | RNVC: 2

29 May 2000

5340-15-157-9190
Assieme Piastrina

151579190
0-164132: RNCC: 3 | RNVC: 2
(241)A39630-164132: RNCC: 5 | RNVC: 2
1PA39630-164132: RNCC: 5 | RNVC: 2

24 Nov 2003

5340-15-169-6508
Lucchetto G.

151696508
F72017544: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-157-9575
Assieme Con Scatola

151579575
322510040: RNCC: 3 | RNVC: 2
(241)A0094322510040: RNCC: 5 | RNVC: 2

3 Dec 2003

5340-15-166-4841
Angolare Sx

5340-15-213-4658
Cintino Cotone Stre

152134658
CINTINOS: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-112-2923
Fermo Speciale

151122923
218A1033-002: RNCC: 3 | RNVC: 2

10 Apr 1991

5340-15-222-2273
Ang. Fissaggio 80X8

152222273
S1-110M: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-149-3993
Clamp

151493993
518-33-1220: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-15-020-1197
Snap Hook

150201197
04-071-030-10-3: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-118-7449
Nut And Bolt Locking Plate

151187449
9431302: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-051-9849
Resilient Mount

150519849
7723818: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-112-8450
Flangia

151128450
467364: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-139-7808
Cinghia Fissaggio

151397808
1000496: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-156-3376
Half Rings

151563376
(241)A3460CBD71235P01: RNCC: 3 | RNVC: 2
CBD71235P01: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-15-156-3365
Trasportatore

151563365
(241)A3460CBD71230P01: RNCC: 3 | RNVC: 2
CBD71230P01: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-15-189-1366
Piastra Di Montaggi

151891366
60181260: RNCC: 3 | RNVC: 2
(241)A424960181260: RNCC: 5 | RNVC: 2

28 Jan 2010

5340-15-005-6125
Vite Prigioniera Sp

150056125
0-10362: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-212-1427
Tassello In Nylon C

152121427
S8CV: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-055-6321
Piastrina

150556321
551642: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-207-4603
Nose Landing Plate

152074603
9CA4030A320-001: RNCC: 3 | RNVC: 2
(241)A21429CA4030A320-001: RNCC: 5 | RNVC: 2

11 Oct 2012

5340-15-163-0257
Manual Control Lever

151630257
ELET10352: RNCC: 3 | RNVC: 2

14 May 2002

5340-15-000-4723
Manual Control Lever

150004723
8050824: RNCC: 3 | RNVC: 2

7 Mar 2013

5340-15-003-1480
Double Angle Bracket

150031480
5949778123: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-113-2376
Flangiacomplessivo

151132376
233A1046-405: RNCC: 3 | RNVC: 2

11 Apr 1991

5340-15-156-3385
Disc

151563385
CBD71242P04: RNCC: 3 | RNVC: 2
(241)A3460CBD71242P04: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-15-157-6340
Control Rod

151576340
11030803: RNCC: 3 | RNVC: 2
(241)A977211030803: RNCC: 5 | RNVC: 2

9 Oct 2003

5340-15-199-3326
Control Rod

151993326
504081286: RNCC: 3 | RNVC: 2
(241)A4249504081286: RNCC: 5 | RNVC: 2

6 Mar 2005

5340-15-119-3645
Staffa Rivelatore I

151193645
29957-101B00: RNCC: 3 | RNVC: 2

18 Jul 1994

5340-15-153-9450
Base (1) Per Sosteg

151539450
142061255: RNCC: 2 | RNVC: 3

12 Mar 2001

5340-15-209-0684
Lucchetto Ad Arco P

152090684
4140000: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-179-1897
Manual Control Handle

151791897
VKIC40REP2: RNCC: 3 | RNVC: 2

13 Jun 2006

5340-15-166-4899
Serratura Elettrica

151664899
11261601: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-115-1812
Knob Valve

151151812
500117: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-181-1752
Collare Fermatubi

151811752
179004378: RNCC: 3 | RNVC: 2
(241)A0199179004378: RNCC: 5 | RNVC: 2

5 Nov 2008

5340-15-110-2896
Bracket Fue

151102896
P120193-002: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-065-3409
Turnbuckle Body

150653409
63072-101: RNCC: 3 | RNVC: 2

28 Jan 1985

5340-15-181-7840
Terminale Antipiogg

151817840
ANTIPIOGGIA: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-139-3185
Tassello

151393185
1364040: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-215-6235
Scala Multiuso Allu

152156235
23688886: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-178-5979
Hook For Spring

151785979
541-01-3380: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-142-5836
Assieme Coperchio

151425836
DE075-203-1022-17: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-198-9877
Dust And Moisture Seal Protective Plug

151989877
165003540: RNCC: 3 | RNVC: 2
(241)A0199165003540: RNCC: 5 | RNVC: 2

20 Dec 2004

5340-15-211-8776
Pannello Con Pannob

152118776
NB2002D: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-113-2441
Cablaggioelettricoc

151132441
276A3422-401: RNCC: 3 | RNVC: 2

11 Apr 1991

5340-15-068-9682
Helical Compression Spring Retainer

150689682
32-02-259: RNCC: 3 | RNVC: 2

9 Jul 1986

5340-15-179-7054
Double Angle Bracket

151797054
0000500410044: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-120-3325
Headless Straight Rod

151203325
2421-006: RNCC: 3 | RNVC: 2
8196888: RNCC: 5 | RNVC: 2
2421-006: RNCC: 5 | RNVC: 9

30 Mar 1995

5340-15-194-3537
Aircraft Latch Hook

151943537
109-0502-97-101: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-15-138-2895
Lucchetto Mm.40

151382895
5477: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-162-1841
Anchor Strap

151621841
9311: RNCC: 3 | RNVC: 2

3 Apr 2001

5340-15-215-3348
Spiralina Per Piomb

152153348
22857: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-118-0344
Coperchietto Con Di

151180344
D0467943: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-15-063-7875
Nut And Bolt Locking Plate

150637875
1127/288: RNCC: 3 | RNVC: 2
77901400: RNCC: 5 | RNVC: 2

31 Mar 1982

5340-15-205-9222
Dust And Moisture Seal Protective Cap-Plug

152059222
8104372: RNCC: 3 | RNVC: 2
(241)A31148104372: RNCC: 5 | RNVC: 2

17 Apr 2012

5340-15-155-7612
Handle

151557612
CBD71046P05: RNCC: 3 | RNVC: 2

24 Jun 2002

5340-15-149-3670
Plate

151493670
518-03-1540: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-15-148-2814
Assieme Tappo

151482814
PNE208001-007: RNCC: 3 | RNVC: 2

20 Jul 1998

5340-15-179-4050
Handwheel

151794050
700408: RNCC: 3 | RNVC: 2

28 Nov 2006

5340-15-190-6436
Spacer

151906436
5E11D1: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-144-6637
Staffa Elastica

151446637
6337105C: RNCC: 3 | RNVC: 2
7463073V: RNCC: 3 | RNVC: 2

11 Dec 1996

5340-15-120-4753
Resilient Mount

151204753
1Q 541225LB: RNCC: 3 | RNVC: 2
1Q 541225LB: RNCC: 5 | RNVC: 9

5 Nov 1996

5340-15-112-9289
Coperchiettoperindi

151129289
78956F01: RNCC: 3 | RNVC: 2
78956: RNCC: 3 | RNVC: 2

15 Jan 1996

5340-15-217-7023
Staffa 16E22

152177023
CASMC1600WT: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-217-7174
Barre Filettate

152177174
10X130: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-221-5249
Ruote Snodabili

152215249
EX5340VI7000015: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-170-6158
Manual Control Handle

151706158
VKIC63REP2: RNCC: 3 | RNVC: 2
CAE00424: RNCC: 5 | RNVC: 2

2 Apr 2003

5340-15-150-1174
Manual Control Handle

151501174
9070050: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-203-9704
Perno + Rondella

152039704
22500675: RNCC: 3 | RNVC: 2
(241)A486722500675: RNCC: 5 | RNVC: 2

29 Jul 2011

5340-15-200-4872
Coperchio

152004872
N967G7130101: RNCC: 3 | RNVC: 2
(241)A0126N967G7130101: RNCC: 5 | RNVC: 2

25 Jan 2006

5340-15-220-0671
Telaio Porta Scatol

152200671
S1-143J: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-151-4573
Fissaggio Tranciabu

151514573
UOHF0140000: RNCC: 3 | RNVC: 2

29 May 2000

5340-15-178-7401
Snap Hook

151787401
053361: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-196-6307
Padlock

151966307
PN UAS 00049084: RNCC: 3 | RNVC: 2
5340F76039741: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-119-1221
Manual Control Handle

151191221
73115922: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-003-7587
Spacing Threaded Standoff

150037587
17815914: RNCC: 3 | RNVC: 2

21 Nov 2013

5340-15-175-9321
Tappo Persiana Fiss

151759321
TR1629: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-213-8540
Elettroserratura Ve

152138540
535010805: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-115-7048
Coperchietto Superi

151157048
D0468386: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-115-7136
Ghieranonfilettatae

151157136
D0470037: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-15-115-7174
Supporto Rullo

151157174
D1401525: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-15-067-7847
Handwheel

150677847
D2208-13: RNCC: 2 | RNVC: 2
D2208-13: RNCC: 5 | RNVC: 9

1 Apr 1998

5340-15-134-4559
Staffa

151344559
10006709: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-150-7462
Gearbox Mounting Ru

151507462
001078AA: RNCC: 3 | RNVC: 2

20 Dec 1999

5340-15-067-2630
Fascetta

150672630
C454: RNCC: 2 | RNVC: 2

1 Apr 1998

5340-15-122-4578
Pali

151224578
PAL3: RNCC: 3 | RNVC: 2

26 Jul 1996

5340-15-112-8513
Supporto

151128513
471853: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-112-8355
Seggio

151128355
470944: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-041-8025
Perno A Forcella

150418025
4-3351-301-41864: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-068-5771
Cover Exhaust

150685771
75059F01: RNCC: 3 | RNVC: 2
75059F01: RNCC: 5 | RNVC: 2

10 Apr 1986

5340-15-206-9954
Tappo Interno

152069954
081407: RNCC: 3 | RNVC: 2
(241)A3593081407: RNCC: 5 | RNVC: 2

6 Aug 2012

5340-15-152-8203
Fascette In Plastic

151528203
P400209: RNCC: 3 | RNVC: 2

27 Oct 2000

5340-15-074-4240
Turnbuckle

150744240
1D20UNI2019A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-213-4660
Zanzariera In Allum

152134660
ZANZARIERACM100: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-066-4078
Tappo Tubo Di Scari

150664078
68-903050-401: RNCC: 3 | RNVC: 2

25 Oct 1985

5340-15-166-5095
Bush

151665095
26T083P019: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-127-3254
Staffetta Fissaggio

151273254
742266: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-156-4114
Tappo Di Protezione

151564114
1M02904009: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-191-2129
Maniglia Ottone For

151912129
MANIGLIA-OTT-Q8: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-159-4728
Padlock

151594728
PN UAS 00003526: RNCC: 3 | RNVC: 2
5340F76009617: RNCC: 5 | RNVC: 9

31 Mar 2004

5340-15-136-7154
Bottone A Scatto

151367154
100-046S84A1: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-105-9141
Headless Straight Rod

151059141
14587071: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-202-5453
Support

152025453
J04841612-001: RNCC: 3 | RNVC: 2

6 May 2007

5340-15-111-4585
Terminal

151114585
275A2342-003: RNCC: 3 | RNVC: 2

6 Dec 1990

5340-15-178-2586
Exter Clamping Ring

151782586
P3199011: RNCC: 3 | RNVC: 2

29 Apr 2005

5340-15-149-1113
Staffa

151491113
60172182: RNCC: 3 | RNVC: 2

2 Dec 1998

5340-15-051-9224
Chiave Per Serratur

150519224
DISNP17TIP0HDESTRA: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-041-2146
Tubetto Distanziale

150412146
8-3025-114-32156-3: RNCC: 3 | RNVC: 2
8-3025-1-14-32156-3: RNCC: 5 | RNVC: 2

22 Nov 1975

5340-15-074-4373
Turnbuckle

150744373
2C16UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-120-6411
Nonmetallic Solid Wheel

151206411
D0470438: RNCC: 3 | RNVC: 2

8 May 1996

5340-15-201-4117
Rubber Bumper

152014117
TIPO DDC: RNCC: 3 | RNVC: 2

24 Aug 2006

5340-15-230-1778
Clamp

152301778
678071: RNCC: 3 | RNVC: 2
534015E149982: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-101-4745
Paletto Fissaggio

151014745
000200315200: RNCC: 5 | RNVC: 2
000200315200: RNCC: 5 | RNVC: 9

30 May 1987

5340-15-161-8638
Staffa Reggimensola

151618638
MP4: RNCC: 3 | RNVC: 2

1 Oct 2000

5340-15-218-4276
Pomolo Ottone

152184276
POMOLOTTONE: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-006-6022
Clamp

150066022
79250-001: RNCC: 3 | RNVC: 2

24 Nov 1979

5340-15-152-6956
Assieme Tappo

151526956
9CD1741A500-401: RNCC: 3 | RNVC: 2

12 Oct 2000

5340-15-057-3883
Guida Asta Comando

150573883
AB47-385-157-42: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-134-6421
Staffa Inferiore

151346421
4709507: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-163-2365
Clamp

151632365
4877183: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-203-9197
Fascetta Autoblocca

152039197
0552079520: RNCC: 3 | RNVC: 2
A2/7,9X521: RNCC: 3 | RNVC: 2
(241)A93630552079520: RNCC: 5 | RNVC: 2

26 Jul 2011

5340-15-170-8580
Lastra 564X376x1.6

151708580
58311-11/119: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-192-3857
Piastra Di Montaggi

151923857
051740: RNCC: 3 | RNVC: 2
(241)A3593051740: RNCC: 5 | RNVC: 2

15 Mar 2010

5340-15-187-9326
Angle Bracket

151879326
3000057: RNCC: 3 | RNVC: 2

1 Jun 2009

5340-15-166-4905
Traversino

151664905
SL20180: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-111-4098
Elementogancio

151114098
M24X-003P005: RNCC: 3 | RNVC: 2

23 Nov 1990

5340-15-109-8927
Camicia

151098927
472492: RNCC: 3 | RNVC: 2
D0472492: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-053-5944
Tirante

150535944
45-7466-11: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-213-7220
Serratura Ad Infila

152137220
704-70-16: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-125-2729
Escutcheon Plate

151252729
5996192: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-111-5776
Clamp Ring

151115776
01TC20558: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-074-4095
Turnbuckle

150744095
2B10UNI20180T60-2012AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-195-1561
Metallic Seal Cap

151951561
412-4600-27-101: RNCC: 3 | RNVC: 2

4 Mar 2011

5340-15-218-0092
Snap Hook

152180092
401-120: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-179-8011
Valve Plate

151798011
6-01-012: RNCC: 3 | RNVC: 2

3 Aug 2007

5340-15-008-2920
Anello

150082920
219AE0067-1: RNCC: 3 | RNVC: 2

1 Feb 1982

5340-15-112-1378
Coperchio

151121378
DE013.14.367: RNCC: 3 | RNVC: 2

12 Feb 1991

5340-15-196-6187
Padlock

151966187
PN UAS 00039849: RNCC: 3 | RNVC: 2
5340F76033944: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-213-8898
Cappetta Copriforo

152138898
GS2314: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-123-5692
Spinotto Estraibile

151235692
99A759P003: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-217-9660
Key Blank

152179660
CHIAVEGREZZA: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-041-2776
Attacco A Forcella

150412776
4-8207-301-28352-1: RNCC: 3 | RNVC: 2
4-8207-3-01-28352-1: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-152-0191
Piastra

151520191
00164724: RNCC: 3 | RNVC: 2
0-164724: RNCC: 3 | RNVC: 2
(241)A39630-164724: RNCC: 5 | RNVC: 2

2 Aug 2000

5340-15-074-4182
Turnbuckle

150744182
2A27UNI2019AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-005-1503
Strip

150051503
981EL01Y: RNCC: 3 | RNVC: 2

9 Dec 2013

5340-15-103-2021
Lamierino

151032021
DE160.02.084: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-005-4495
Anchor Strap

150054495
1276-19-301: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-148-6691
Handle Grip

151486691
1M08157002: RNCC: 3 | RNVC: 2

17 Sep 1998

5340-15-115-3264
Joint Axle

151153264
F400C1D3-28: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-170-7274
Mechanical Brackets

151707274
839-5810-067: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-109-8977
Atturatore

151098977
371889: RNCC: 3 | RNVC: 2
D0371889: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-103-6597
Staffa Fissaggio Se

151036597
24009134A: RNCC: 3 | RNVC: 2

26 Nov 1987

5340-15-166-5260
Serbatoio Metallico

151665260
SERBMET316LT: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-120-3456
Dust And Moisture Seal Protective Cap-Plug

151203456
60172260: RNCC: 3 | RNVC: 2
(241)A424960172260: RNCC: 5 | RNVC: 2

3 Apr 1995

5340-15-120-6762
Portaboccola Carena

151206762
D1401546: RNCC: 3 | RNVC: 2

29 Jun 1996

5340-15-166-4776
Supporto

151664776
4734051: RNCC: 3 | RNVC: 2
4734051: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-110-7999
Supportoprotezionei

151107999
94266-001A00: RNCC: 3 | RNVC: 2
94266-001: RNCC: 5 | RNVC: 2

29 Jul 1990

5340-15-089-9364
Dust And Moisture Seal Protective Cap

150899364
A64203: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-195-7361
Tappo Barra Ciclist

151957361
179006108: RNCC: 3 | RNVC: 2
(241)A0199179006108: RNCC: 5 | RNVC: 2

3 May 2011

5340-15-152-2942
Wedge

151522942
302-4685-00: RNCC: 3 | RNVC: 2

17 Aug 2000

5340-15-122-5585
Spanner Man

151225585
01TL21037-01: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-107-1170
Dust And Moisture Seal Protective Plug

151071170
301-01-8290: RNCC: 3 | RNVC: 2

14 Apr 1987

5340-15-198-9013
Handwheel

151989013
26HJ04143043S01-423/017: RNCC: 3 | RNVC: 2

25 Nov 2004

5340-15-232-9577
Tassello

152329577
0264: RNCC: 3 | RNVC: 2
534015E075117: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-104-4337
Testa Tira Forcella

151044337
10008811: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-156-3916
Support Leg

151563916
(241)A3460CBD71356P02: RNCC: 3 | RNVC: 2
CBD71356P02: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-181-7503
Fascetta Metallica

151817503
A103102: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-214-1470
Sonda Con Anima In

152141470
0650: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-122-2020
Lame Droite

151222020
D128618102: RNCC: 3 | RNVC: 2
D128618102: RNCC: 5 | RNVC: 2
D128618102: RNCC: 5 | RNVC: 2

25 Jun 1996

5340-15-181-0710
Aft Half-Hinge

151810710
N925G1515201: RNCC: 3 | RNVC: 2

15 Oct 2008

5340-15-111-5927
Holder

151115927
A05627-01-25: RNCC: 3 | RNVC: 2
A05627-01-25: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-193-9519
Angle Bracket

151939519
109-0881-12-105: RNCC: 3 | RNVC: 2

3 Aug 2010

5340-15-215-5515
Seat Creepers

152155515
JC24BO: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-118-1316
Supporto Rigido Dx

151181316
62421-102: RNCC: 3 | RNVC: 2
62421-102A00: RNCC: 5 | RNVC: 2

23 Mar 1994

5340-15-147-4042
Forcella

151474042
20610-101B1: RNCC: 3 | RNVC: 2
20610-101B01: RNCC: 5 | RNVC: 2

11 Nov 1997

5340-15-009-2569
Semicerniera

150092569
P-882734-001: RNCC: 3 | RNVC: 2

20 Aug 1980

5340-15-139-2703
Lucchetto Mm.40

151392703
110-40: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-183-8689
Lucchetti Sergeant

151838689
COMM631020060004: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-195-7354
Protezione

151957354
178950555: RNCC: 3 | RNVC: 2
(241)A0199178950555: RNCC: 5 | RNVC: 2

3 May 2011

5340-15-121-3150
Spring Guide

151213150
3652-38: RNCC: 3 | RNVC: 2
3652-38: RNCC: 5 | RNVC: 9

7 Nov 1995

5340-15-125-6179
Lucchetto Cisa

151256179
MOD. 280/56: RNCC: 3 | RNVC: 2
MOD. 280/56: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-154-1792
Piastrina Di Fermo

151541792
130766: RNCC: 3 | RNVC: 2

27 Mar 2001

5340-15-068-7762
Calotta

150687762
165819201: RNCC: 3 | RNVC: 2

30 Jan 1987

5340-15-121-6149
Molette

151216149
80A006925: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-115-0157
Nottolinoamollaspec

151150157
W3755101BX: RNCC: 3 | RNVC: 2
W3755101BX: RNCC: 5 | RNVC: 9

23 Oct 1992

5340-15-187-2292
Assieme Maniglia

151872292
A2016: RNCC: 3 | RNVC: 2
(241)A7904A2016: RNCC: 5 | RNVC: 2

26 Feb 2009

5340-15-007-8088
Helical Compression Spring Retainer

150078088
766188: RNCC: 3 | RNVC: 2

27 Mar 1979

5340-15-121-6284
Nonmetallic Bumper

151216284
800033662: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-105-8171
Sostegno Elastico

151058171
76512: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-106-4411
Proiettore Molletta

151064411
00.310.390: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-175-8997
Supporto Di Sostegn

151758997
2216S: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-103-2089
Flangia Speciale

151032089
L3800025: RNCC: 3 | RNVC: 2
(241)A5015DE160.03.196: RNCC: 5 | RNVC: 2
DE160.03.196: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-100-6313
Spec Ammortizzatore

151006313
CB1400-20: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-100-8947
Semicerniera

151008947
109-0640-52-125: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-15-155-5200
Access Door

151555200
(241)A5015DE004.03.141: RNCC: 3 | RNVC: 2
DE004.03.141: RNCC: 3 | RNVC: 2

8 Apr 2002

5340-15-006-6642
Cap

150066642
647-00-00-12: RNCC: 3 | RNVC: 2

24 Nov 1979

5340-15-185-8134
Box Plastica 134X12

151858134
012: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-115-6083
Misura Flangia Tubo

151156083
D0469668: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-156-3387
Extractor

151563387
(241)A3460CBD71242P01: RNCC: 3 | RNVC: 2
CBD71242P01: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-15-201-4033
Dust And Moisture Seal Protective Plug

152014033
00207280: RNCC: 3 | RNVC: 2
(241)A349200207280: RNCC: 5 | RNVC: 2

21 Aug 2006

5340-15-103-0467
Resilient Mount

151030467
591148: RNCC: 3 | RNVC: 2

21 Jun 1987

5340-15-180-4538
Piastra Di Montaggi

151804538
504238291: RNCC: 3 | RNVC: 2
(241)A4249504238291: RNCC: 5 | RNVC: 2

27 May 2008

5340-15-183-2825
Serratura

151832825
9700070080: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-118-0389
Cannotto In Acciaio

151180389
D0484573: RNCC: 3 | RNVC: 2

18 Nov 1994

5340-15-195-1198
Staffa Per Montaggi

151951198
MB-77: RNCC: 3 | RNVC: 2
(241)A8768MB-77: RNCC: 5 | RNVC: 2

3 Mar 2011

5340-15-195-5450
Struttura Metallica

151955450
OLIVER-FB4: RNCC: 3 | RNVC: 2
(241)AK135OLIVER-FB4: RNCC: 5 | RNVC: 2

4 Apr 2011

5340-15-041-9291
Fascetta

150419291
1-2755-116-24446-6: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-207-8613
Angle Bracket

152078613
5801319269: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-068-2560
Piastrina

150682560
RS 402 140: RNCC: 3 | RNVC: 2

27 Oct 1984

5340-15-063-1697
Metal Runner

150631697
469320/A: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-181-1744
Ammortizza Collare

151811744
179003913: RNCC: 3 | RNVC: 2
(241)A0199179003913: RNCC: 5 | RNVC: 2

5 Nov 2008

5340-15-007-3757
Tirante Speciale

150073757
0-34070: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-127-5176
Anello Elast.Dist.T

151275176
873636: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-061-5600
Dust And Moisture Seal Protective Plug

150615600
1200096-15B000013: RNCC: 5 | RNVC: 2
000200086400: RNCC: 5 | RNVC: 2
000200086400: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-153-7256
Base (1) Per Sosteg

151537256
142041177: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-149-7077
Dust And Moisture Seal Protective Plug

151497077
105954: RNCC: 3 | RNVC: 2

7 May 1999

5340-15-206-8537
Rod Stay

152068537
176001416: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-064-7270
Resilient Mount

150647270
60118397: RNCC: 3 | RNVC: 2

17 Nov 1983

5340-15-204-2113
Angle Bracket

152042113
C114-ST: RNCC: 3 | RNVC: 2
(241)A5283C114-ST: RNCC: 5 | RNVC: 2

27 Sep 2011

5340-15-142-2379
Ammortizzatore

151422379
MM350AISI316: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-112-8162
Levadic

151128162
469597: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-233-0449
Ruota Con Supporto

152330449
91A: RNCC: 3 | RNVC: 2
534015E060197: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-118-6080
Bande

151186080
73128614: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-118-0435
Attacco Leva

151180435
D0487583: RNCC: 3 | RNVC: 2

5 Dec 1994

5340-15-230-1543
Kit Guide Di Impila

152301543
141-6045/01: RNCC: 3 | RNVC: 2
534015E142071: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-170-8698
Manicotto Marcafili

151708698
67133-03/033: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-100-7617
Semifascetta

151007617
109-0020-79-1: RNCC: 3 | RNVC: 2

24 Nov 1986

5340-15-166-5142
Fascetta Serracavo

151665142
178490: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-127-2539
Anello

151272539
4003515: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-115-2745
Lower Rest

151152745
518051810: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-120-6484
Cuneo Complessivo

151206484
D0370571: RNCC: 3 | RNVC: 2

28 Jun 1996

5340-15-110-3824
Staffette

151103824
F405D3-24: RNCC: 3 | RNVC: 2
F405D3-24: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-103-2032
Scalino

151032032
DE160.02.097: RNCC: 3 | RNVC: 2
(241)A5015DE160.02.097: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-119-2912
Resilient Mount

151192912
TM9.0358.054.00: RNCC: 3 | RNVC: 2
TM9.0358.054.00: RNCC: 5 | RNVC: 9

6 Feb 1995

5340-15-159-9638
Resilient Mount

151599638
122605955: RNCC: 3 | RNVC: 2

19 Apr 2004

5340-15-159-4720
Padlock

151594720
PN UAS 00005320: RNCC: 3 | RNVC: 2
9999F76008781: RNCC: 5 | RNVC: 9

31 Mar 2004

5340-15-105-2538
Piastra Rattoppo Ri

151052538
999690134A: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-105-8195
Sostegno Elastico

151058195
9871: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-112-8310
Fodera

151128310
467181: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-115-4026
Retainer

151154026
73111467: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-118-0374
Tappo Porta Valvola

151180374
D0472583: RNCC: 3 | RNVC: 2

18 Nov 1994

5340-15-008-6111
Rubber Bumper

150086111
4276736: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-145-1747
Wheel

151451747
ART.63-6302: RNCC: 3 | RNVC: 2
ART.63-6302: RNCC: 5 | RNVC: 9
ART.63-6302: RNCC: 5 | RNVC: 9

2 Jun 1997

5340-15-141-4409
Anodo

151414409
W015547: RNCC: 3 | RNVC: 2
(7001)5340151414409: RNCC: 5 | RNVC: 2

9 Jun 1997

5340-15-153-3068
Speciale Alberino

151533068
122606168: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-15-127-2346
Piastrina Su Schien

151272346
965958: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-212-7652
Piastrina

152127652
454-01-0104: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-181-0339
Tassello Da Muro

151810339
SX10F: RNCC: 3 | RNVC: 2
(241)AB882SX10F: RNCC: 5 | RNVC: 2

1 Oct 2008

5340-15-152-7131
Manicotto In Acciai

151527131
D1403607: RNCC: 3 | RNVC: 2

18 Oct 2000

5340-15-179-7717
Manual Control Handle

151797717
37201: RNCC: 3 | RNVC: 2
91581236: RNCC: 5 | RNVC: 2

3 Aug 2007

5340-15-147-9972
Base Dentata

151479972
129-0640-86-105: RNCC: 3 | RNVC: 2

4 Jun 1998

5340-15-180-2238
Lock-Release Lever

151802238
3.K02.A: RNCC: 3 | RNVC: 2
SAMA116402.3.K02.A: RNCC: 3 | RNVC: 2

15 Feb 2008

5340-15-100-2628
Ball Steel

151002628
NOR453-6: RNCC: 3 | RNVC: 2

19 Jun 1987

5340-15-199-3860
Leva

151993860
4.49230.010.00: RNCC: 3 | RNVC: 2
(241)A39630000000132757: RNCC: 5 | RNVC: 2
0000000132757: RNCC: 5 | RNVC: 2

13 Mar 2005

5340-15-157-4217
Piastra Di Raccordo

151574217
21505702: RNCC: 3 | RNVC: 2

14 Jul 2003

5340-15-157-2434
Shock Mount Pad

151572434
DE069.95.024: RNCC: 3 | RNVC: 2
(241)A5015DE069.95.024: RNCC: 5 | RNVC: 2

9 Jun 2003

5340-15-163-3030
Gummituelle

151633030
0064910130: RNCC: 3 | RNVC: 2
6491.013: RNCC: 5 | RNVC: 2
6491.013: RNCC: 5 | RNVC: 2
MB502220: RNCC: 5 | RNVC: 2

12 Aug 2002

5340-15-110-1972
Capsulaasferaascatt

151101972
1609.12: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-061-1808
Access Cover Plate

150611808
000200286750: RNCC: 5 | RNVC: 2
000200286750: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-136-1811
Complesso Boccaport

151361811
X81: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-122-0369
Plug

151220369
98TA828: RNCC: 3 | RNVC: 2

23 Apr 1996

5340-15-193-1523
Piastra Di Montaggi

151931523
504138884: RNCC: 3 | RNVC: 2
(241)A4249504138884: RNCC: 5 | RNVC: 2

20 Apr 2010

5340-15-074-4113
Turnbuckle

150744113
1C76UNI2018A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-214-4117
Serratura

152144117
57316-70: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-215-5204
Supporto Dischi Abr

152155204
7885G-60: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-200-0603
Double Angle Bracket

152000603
13HJ04643008S01-801-54: RNCC: 3 | RNVC: 2

19 Sep 2005

5340-15-202-9135
Half Hinge

152029135
N967G7150201: RNCC: 3 | RNVC: 2
(241)A0126N967G7150201: RNCC: 5 | RNVC: 2

25 Sep 2007

5340-15-116-7489
Rotella Di Scorrime

151167489
30-08-146: RNCC: 3 | RNVC: 2

24 Jun 1993

5340-15-127-3649
Molla Per Leva Moto

151273649
818371: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-058-8672
Contenitore Tabelle

150588672
143040A1: RNCC: 3 | RNVC: 2

11 Mar 1975

5340-15-134-4949
Bottone Di Gomma

151344949
4303883: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-120-8483
Wheel

151208483
A033: RNCC: 3 | RNVC: 2

4 Sep 1995

5340-15-123-6677
Terminal In Durall

151236677
2GMVDIS4-92: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-051-3287
Rubber Bumper

150513287
980031: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-009-6384
Tratto Canalina

150096384
181577P2: RNCC: 3 | RNVC: 2

17 Oct 1980

5340-15-001-6452
Molla

150016452
174010009: RNCC: 3 | RNVC: 2
174010009: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-118-1174
Threaded End Tensioning Tie Rod

151181174
1Q 576746: RNCC: 3 | RNVC: 2
1Q 576746: RNCC: 5 | RNVC: 9

22 Mar 1996

5340-15-000-7216
Lock-Release Lever

150007216
BRP-0324696: RNCC: 3 | RNVC: 2

3 Apr 2013

5340-15-198-9321
Dust And Moisture Seal Protective Plug

151989321
999-5001-10-135: RNCC: 3 | RNVC: 2
(241)A0126999-5001-10-135: RNCC: 5 | RNVC: 2

30 Nov 2004

5340-15-065-0901
Anchor Strap

150650901
7591000001: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-15-135-9636
Staffetta

151359636
5941004: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-136-0234
Staffa Fissaggio

151360234
4774792: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-068-1948
Gruppo Staffaggio

150681948
644631: RNCC: 3 | RNVC: 2
644631: RNCC: 5 | RNVC: 9

27 Feb 1986

5340-15-189-0556
Paraurti Metallico

151890556
0000500400709: RNCC: 3 | RNVC: 2
(241)A39630000500400709: RNCC: 5 | RNVC: 2

21 Jan 2010

5340-15-100-8306
Rubber Bumper

151008306
22030280A: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-236-4122
Serratura Completa

152364122
F01852: RNCC: 3 | RNVC: 2
534015E054684: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-004-2841
Double Angle Bracket

150042841
3T98165-2: RNCC: 3 | RNVC: 2

24 Feb 1978

5340-15-136-0145
Tassello Elastico

151360145
4449016: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-112-8603
Astar

151128603
468949: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-112-5370
Handwheel

151125370
01TC22840: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-166-4830
Angolare

151664830
20403085390: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-183-4957
Catene Ferro Divers

151834957
COMM631018020006: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-107-5078
Metal Runner

151075078
7302381: RNCC: 3 | RNVC: 2
(7001)5340151075078: RNCC: 5 | RNVC: 2
7302381: RNCC: 5 | RNVC: 2

30 Mar 1988

5340-15-153-7355
Soffietto Protezion

151537355
142057191: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-061-5599
Dust And Moisture Seal Protective Plug

150615599
000200086100: RNCC: 5 | RNVC: 2
1200096-15B000011: RNCC: 5 | RNVC: 2
000200086100: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-068-1353
Metal Runner

150681353
27457-001A1: RNCC: 3 | RNVC: 2

26 Mar 1986

5340-15-193-9192
Helical Compression Spring Seat

151939192
262601501ZT179: RNCC: 3 | RNVC: 2

28 Jul 2010

5340-15-103-6622
Double Angle Bracket

151036622
24009164A: RNCC: 3 | RNVC: 2

26 Nov 1987

5340-15-201-3359
Complessiv Collare

152013359
178902023: RNCC: 3 | RNVC: 2
(241)A0199178902023: RNCC: 5 | RNVC: 2

26 Jul 2006

5340-15-116-9705
Nipple

151169705
C50X-6-7/16"INOX: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-232-9263
Supporto Con Ruota

152329263
9999-10057: RNCC: 3 | RNVC: 2
534015E129618: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-163-1340
Support

151631340
4154060: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-152-7917
Paraurti Metallico

151527917
P131404: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-178-5772
Maggnetic Stopper

151785772
DL 1019M+DL 1054: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-195-3291
Corrosion Preventive Anode

151953291
99885310000S: RNCC: 3 | RNVC: 2
(241)A312199885310000S: RNCC: 5 | RNVC: 2

15 Mar 2011

5340-15-106-3029
Tappo Tenuta Comple

151063029
8050: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-101-6874
Handle

151016874
303394: RNCC: 3 | RNVC: 2

19 Jul 1988

5340-15-185-7760
Staffa Per Custodia

151857760
CGSSTAFFA: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-054-7941
Threaded End Tensioning Tie Rod

150547941
32-32-142: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-009-4480
Sliding Stay

150094480
000202238500: RNCC: 5 | RNVC: 2
000202238500: RNCC: 5 | RNVC: 9

19 Jun 1980

5340-15-112-3757
Coperchiopianoapert

151123757
60150694: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-074-4367
Turnbuckle

150744367
1C8UNI20200T60-2012A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-064-6824
Bracket

150646824
73822710: RNCC: 3 | RNVC: 2
73822710: RNCC: 5 | RNVC: 9

10 Jun 1984

5340-15-103-4412
Plug

151034412
37301023: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-187-2186
Scontro

151872186
174801125: RNCC: 3 | RNVC: 2
(241)A0199174801125: RNCC: 5 | RNVC: 2
14100004648: RNCC: 5 | RNVC: 2

25 Feb 2009

5340-15-074-4070
Turnbuckle

150744070
1B80UNI2018A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-111-8916
Coperchioaccesso

151118916
DOR0108833: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-121-7533
Cerniera Sportello

151217533
8506010: RNCC: 3 | RNVC: 2
1PA34888506010: RNCC: 5 | RNVC: 2

14 Feb 1996

5340-15-114-9250
Sadd Pipe Support

151149250
CS20300020: RNCC: 3 | RNVC: 2

10 Feb 1994

5340-15-155-3168
Resilient Mount

151553168
60188987: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-15-155-4852
Locking Support

151554852
CBD71185P06: RNCC: 3 | RNVC: 2

27 Mar 2002

5340-15-199-2595
Dust And Moisture Seal Protective Cover

151992595
5100736-0046: RNCC: 3 | RNVC: 2
(241)A00695100736-0046: RNCC: 5 | RNVC: 2

23 Feb 2005

5340-15-170-3518
Insert

151703518
206-010-356-1: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-168-9819
Padlock

151689819
F72003990: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-006-2953
Resilient Mount

150062953
4356091: RNCC: 3 | RNVC: 2
4356091: RNCC: 5 | RNVC: 9

29 Jun 1979

5340-15-142-7091
Anodo

151427091
4G-A/C/I/165/1: RNCC: 3 | RNVC: 2
AE-330: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-005-4944
Mezza Cerniera Su C

150054944
69-24755-15: RNCC: 3 | RNVC: 2

9 Dec 2013

5340-15-154-0811
Tampone Ammortizzat

151540811
93818454: RNCC: 3 | RNVC: 2
(241)A424993818454: RNCC: 5 | RNVC: 2
1PA424993818454: RNCC: 8 | RNVC: 2

20 Mar 2001

5340-15-166-5200
Tassello In N Lon C

151665200
0364: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-138-5855
Tirante Superiore M

151385855
82443214: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-003-8986
Stand Base

150038986
182741195: RNCC: 3 | RNVC: 2
(241)A0199182741195: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-000-1446
Frame Mounting Dump

150001446
C0090089: RNCC: 3 | RNVC: 2

1 Feb 2013

5340-15-006-0136
Anchor Strap

150060136
B512TL155: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-218-2252
Ruota Mm.80X24

152182252
3EGA0800GLDP: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-149-7705
Serie Anelli Per Am

151497705
RG-MM350-3: RNCC: 3 | RNVC: 2
(241)A3290RG-MM350-3: RNCC: 5 | RNVC: 2

21 Jun 1999

5340-15-143-2781
Lock Spindle

151432781
109-0323-04-1: RNCC: 3 | RNVC: 2

10 Dec 1996

5340-15-114-0244
Helical Compression Spring Seat

151140244
7984617: RNCC: 3 | RNVC: 2

15 Apr 1992

5340-15-197-5139
Antif.Acc.At

151975139
PN UAS 00020489: RNCC: 3 | RNVC: 2
5340F76017765: RNCC: 5 | RNVC: 9

8 Apr 2004

5340-15-188-2209
Speciale Cerniera

151882209
142051721: RNCC: 3 | RNVC: 2
(241)A0199142051721: RNCC: 5 | RNVC: 2

7 Aug 2009

5340-15-110-4467
Bracket

151104467
42068128: RNCC: 3 | RNVC: 2
42068128: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-112-0435
Dispositivo Di Supp

151120435
275A0211-403: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-112-8451
Flangia

151128451
467365: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-170-8103
Plate

151708103
340-0727/10: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-118-8351
Loop Clamp Kit

151188351
9449215: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-154-0793
Molletta Fissaggio

151540793
8966557: RNCC: 3 | RNVC: 2
1PA42498966557: RNCC: 8 | RNVC: 2

20 Mar 2001

5340-15-007-0142
Mancetta A Supporto

150070142
71651-02: RNCC: 3 | RNVC: 2

30 Jan 1980

5340-15-062-8835
Corona Speciale

150628835
4862411: RNCC: 3 | RNVC: 2
0-49457: RNCC: 3 | RNVC: 2
4862411: RNCC: 3 | RNVC: 2
(241)A31144862411: RNCC: 5 | RNVC: 2
(241)A42494862411: RNCC: 5 | RNVC: 2

6 Mar 2000

5340-15-118-2866
Piastra Collare Fis

151182866
D1407325: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-15-102-8091
Testa Di Tirante Fi

151028091
232A4501-403: RNCC: 3 | RNVC: 2

27 Oct 1988

5340-15-116-0127
Resilient Mount

151160127
65390F01: RNCC: 3 | RNVC: 2
65390F01: RNCC: 5 | RNVC: 9

2 Nov 1993

5340-15-147-0032
Tacchetto Di Guida

151470032
HF255: RNCC: 3 | RNVC: 2

4 Sep 1997

5340-15-194-5485
Ingrassatore

151945485
0-111503: RNCC: 3 | RNVC: 2
00111503: RNCC: 3 | RNVC: 2
(241)A396300111503: RNCC: 5 | RNVC: 2

3 Dec 2010

5340-15-219-9114
Tassello Ad Espansi

152199114
HDR1160092: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-152-3327
Seat Pipe Support

151523327
0-117388: RNCC: 3 | RNVC: 2
00117388: RNCC: 3 | RNVC: 2
(241)A39630-117388: RNCC: 5 | RNVC: 2

31 Aug 2000

5340-15-166-4902
Corredo Di Molle Da

151664902
280111: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-220-0661
Telaio Fin. Angolar

152200661
S1-143C: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-052-2477
Morsetto Serratubi

150522477
B740-20-14: RNCC: 3 | RNVC: 2

18 Jun 1970

5340-15-009-5817
Helical Compression Spring Seat

150095817
75466411: RNCC: 3 | RNVC: 2
9982568: RNCC: 5 | RNVC: 2
75466411: RNCC: 5 | RNVC: 9

22 Sep 1979

5340-15-156-9568
Fascetta Fissaggio

151569568
12030101: RNCC: 3 | RNVC: 2

24 Mar 2003

5340-15-120-8695
Supporto Ad Angolo

151208695
109-0613-31-101: RNCC: 3 | RNVC: 2

4 Sep 1995

5340-15-178-6969
Ratchet Lashing

151786969
01802-2-012002METERS: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-154-1142
Double Angle Bracket

151541142
0-170719: RNCC: 3 | RNVC: 2
(241)A39630-170719: RNCC: 5 | RNVC: 2
1PA39630-170719: RNCC: 5 | RNVC: 2

22 Mar 2001

5340-15-156-3659
Protection Plate

151563659
CBD71405P17: RNCC: 3 | RNVC: 2
(241)A3460CBD71405P17: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-120-4578
Supportomensolaspec

151204578
145361-1: RNCC: 3 | RNVC: 2

29 May 1995

5340-15-002-2883
Dust And Moisture Seal Protective Plug

150022883
130667: RNCC: 3 | RNVC: 2

5 Aug 2013

5340-15-100-4022
Bracket

151004022
30061-006-00: RNCC: 3 | RNVC: 2

10 Apr 1987

5340-15-053-9479
Spina Per Cerniera

150539479
260-01-55-27: RNCC: 3 | RNVC: 2
260-01-55-27: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-005-5146
Ritegno Speciale

150055146
554103299000: RNCC: 2 | RNVC: 3
541-03-2990: RNCC: 3 | RNVC: 2

16 Sep 1980

5340-15-153-6595
Compl Chiavistello

151536595
142045019: RNCC: 3 | RNVC: 2
(7001)5340151536595: RNCC: 5 | RNVC: 2

20 Feb 2001

5340-15-202-7823
Protect Blank Panel

152027823
N651U3128201: RNCC: 3 | RNVC: 2
(241)A0126N651U3128201: RNCC: 5 | RNVC: 2

10 Jul 2007

5340-15-009-7859
Turnbuckle

150097859
2672: RNCC: 3 | RNVC: 2

26 Jan 1981

5340-15-152-7859
Turnbuckle

151527859
P120617: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-154-8844
Rubber Bumper

151548844
55-G-50: RNCC: 3 | RNVC: 2

7 Nov 2001

5340-15-199-9899
Disco Elastico

151999899
2735032: RNCC: 3 | RNVC: 2
(241)AF2323012622: RNCC: 5 | RNVC: 2
3012622: RNCC: 5 | RNVC: 2

24 Aug 2005

5340-15-136-5728
Raccordo Filettato

151365728
7062048: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-064-7675
Rubber Bumper

150647675
14.50.22.50: RNCC: 3 | RNVC: 2

27 Oct 1983

5340-15-207-3417
Utility Resilient Mount

152073417
9437188: RNCC: 3 | RNVC: 2

9 Oct 2012

5340-15-150-5904
Assieme Cornice

151505904
A62374-01-10: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-15-192-0412
Cap Screw

151920412
P-410135-001: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-148-7125
Cerniera A Volonta'

151487125
109-0301-27-117: RNCC: 3 | RNVC: 2

28 Sep 1998

5340-15-063-8188
Collare A Supporto

150638188
41231-01: RNCC: 3 | RNVC: 2

19 Jul 1983

5340-15-109-4890
Turnbuckle Body

151094890
1Q 548111: RNCC: 3 | RNVC: 2
1Q 548111: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-156-3364
Half Rings

151563364
(241)A3460CBD71249P01: RNCC: 3 | RNVC: 2
CBD71249P01: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-15-186-7819
Bumper

151867819
131182080: RNCC: 3 | RNVC: 2

5 Jan 2009

5340-15-106-0661
Scodellino Molla

151060661
002.2967.0: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-170-4238
Safety Block

151704238
1-409711: RNCC: 3 | RNVC: 2

16 Jan 2003

5340-15-105-6023
Staffa A Gomito

151056023
4747571: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-213-8165
Serratura Fron.Agb

152138165
8460-00-16: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-151-7568
Stop Assembly

151517568
J52850350-404: RNCC: 3 | RNVC: 2

5 Jul 2000

5340-15-003-8835
Stand Base

150038835
182707802: RNCC: 3 | RNVC: 2
(241)A0199182707802: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-198-4769
Dadi E Kit Bulloni

151984769
9091028: RNCC: 3 | RNVC: 2
(241)A19029091028: RNCC: 5 | RNVC: 2

4 Oct 2004

5340-15-007-2701
Arresto Por Tirante

150072701
1385132: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-149-3076
Riparo Tubazioni Pe

151493076
4885770: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-107-6384
Speciale Piastrina

151076384
287515A1: RNCC: 3 | RNVC: 2

27 Oct 1988

5340-15-045-3640
Fascetta

150453640
753-12-21: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-218-2504
Lucchetto Mm.70

152182504
800707: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-222-2710
Ruota Piena Non Met

152222710
050031: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-139-9279
Collare Serraggio

151399279
I271RA: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-138-3660
Tassello

151383660
4315728: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-122-2906
Cache Lateral Gauch

151222906
800074152: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-074-4154
Turnbuckle

150744154
2D12UNI2018ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-215-3885
Cilindro Ovale Mm.8

152153885
CILINDRO80MM.: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-065-4150
Tubo Per Infissione

150654150
DIS.BG 165/S.26: RNCC: 3 | RNVC: 2
490.700: RNCC: 5 | RNVC: 2

2 Apr 1985

5340-15-237-4522
Posizionatore Da Ce

152374522
182170/9-11: RNCC: 3 | RNVC: 2
534015E054715: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-122-5869
Resilient Mount

151225869
326000005: RNCC: 3 | RNVC: 2
326000005: RNCC: 5 | RNVC: 2

10 Sep 1996

5340-15-214-0906
Inserto A Croce Fre

152140906
F3003: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-008-3226
Resilient Mount

150083226
CB1380-15-C2: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-110-4379
Serratura Ad Incass

151104379
42325715: RNCC: 3 | RNVC: 2
42325715: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-179-7132
Dust And Moisture Seal Protective Cover

151797132
0000500407288: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-122-7052
Supporto Angolo

151227052
X10972-403: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-127-4465
Anello

151274465
1740-16-039: RNCC: 3 | RNVC: 2
1740-16-039: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-149-0125
Threaded End Tensioning Tie Rod

151490125
00085570: RNCC: 3 | RNVC: 2

17 Nov 1998

5340-15-166-5106
Gancio Per Pannello

151665106
547001: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-194-8714
Kit Pressure Plate

151948714
3270553: RNCC: 3 | RNVC: 2
10/908004: RNCC: 5 | RNVC: 2

27 Jan 2011

5340-15-174-7036
Dust And Moisture Seal Protective Cover

151747036
ECN40SB-60: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-163-1503
Rivet

151631503
1308439080: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-231-0969
Ruotino Fisso

152310969
000920.10: RNCC: 3 | RNVC: 2
534015E096739: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-074-4046
Turnbuckle

150744046
2A72UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-148-9863
Shroud

151489863
228 88: RNCC: 3 | RNVC: 2
228 88: RNCC: 5 | RNVC: 9

9 Nov 1998

5340-15-198-3180
Fermo Metallico

151983180
5387.GE50-C-I-1-6-3: RNCC: 3 | RNVC: 2
(241)A53875387.GE50-C-I-1-6-3: RNCC: 3 | RNVC: 2

21 Sep 2004

5340-15-122-5167
Bracket

151225167
930-011: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-152-8851
Complessi Cerniera

151528851
190509061: RNCC: 3 | RNVC: 2

7 Nov 2000

5340-15-138-4649
Tirante

151384649
5944358: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-117-3987
Resilient Mount

151173987
D1405558: RNCC: 3 | RNVC: 2

31 Mar 1994

5340-15-180-4714
Cerniera

151804714
142710144: RNCC: 3 | RNVC: 2
(241)A0199142710144: RNCC: 5 | RNVC: 2

28 May 2008

5340-15-198-9682
Serie Di Tasselli

151989682
1P 343332: RNCC: 3 | RNVC: 2
(241)A01061P343332: RNCC: 5 | RNVC: 2

14 Dec 2004

5340-15-004-2095
Piastrina Di Tenuta

150042095
P-175035-001: RNCC: 3 | RNVC: 2
P175035-001: RNCC: 5 | RNVC: 2

24 Nov 1979

5340-15-008-1197
Piastrina Fermo Com

150081197
A1-53067-001: RNCC: 3 | RNVC: 2
A1-53067-001: RNCC: 5 | RNVC: 9

22 Apr 1981

5340-15-062-1693
Support

150621693
26032.0000: RNCC: 5 | RNVC: 2
4-26032.0000//D: RNCC: 5 | RNVC: 2
4-26032D: RNCC: 5 | RNVC: 2
26032.0000: RNCC: 5 | RNVC: 9
4-26032.0000//D: RNCC: 5 | RNVC: 9
4-26032D: RNCC: 5 | RNVC: 9

28 Sep 1981

5340-15-181-6102
Braccio Motore Came

151816102
119RIG052: RNCC: 3 | RNVC: 2

19 Dec 2008

Load More Results