What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 5 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 5 of 72

5340-15-107-8053
Rod End Clevis

151078053
92686-101: RNCC: 3 | RNVC: 2

2 Jun 1989

5340-15-193-5052
Loop Clamp

151935052
RPP-216/16: RNCC: 3 | RNVC: 2

25 May 2010

5340-15-202-3526
Retaining Band

152023526
504118526: RNCC: 3 | RNVC: 2
(241)A4249504118526: RNCC: 5 | RNVC: 2

28 Feb 2007

5340-15-189-2993
Butt Hinge

151892993
109-0641-43-181: RNCC: 3 | RNVC: 2

11 Feb 2010

5340-15-007-9950
Loop Clamp

150079950
4649507: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-120-3357
Bow Handle

151203357
92300150242: RNCC: 3 | RNVC: 2
93158886: RNCC: 5 | RNVC: 2

30 Mar 1995

5340-15-177-4183
Bridge Clamp

151774183
047189: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-109-1260
Retaining Band

151091260
4739063: RNCC: 3 | RNVC: 2

30 Apr 1988

5340-15-153-5250
Expansion Plug

151535250
230023352: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-179-6427
Access Cover

151796427
42490783: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-120-2508
Leather Strap

151202508
60145400: RNCC: 3 | RNVC: 2

6 Mar 1995

5340-15-153-7760
Access Cover

151537760
02731A129070: RNCC: 5 | RNVC: 2
T0064579: RNCC: 5 | RNVC: 2
02731A129070: RNCC: 5 | RNVC: 9

28 Feb 2001

5340-15-128-4015
Handle Grip

151284015
SC445: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-007-3830
Screw Thread Insert

150073830
4353293: RNCC: 3 | RNVC: 2
4353293: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-074-3962
Retaining Strap

150743962
22VNI2134CD: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-064-3720
Retaining Strap

150643720
1384366: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-008-0794
Retaining Strap

150080794
60113153: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-187-8244
Mounting Bracket

151878244
018.067.00.14: RNCC: 3 | RNVC: 2
(241)A6479018.067.00.14: RNCC: 5 | RNVC: 2
018.067.00.14: RNCC: 5 | RNVC: 2

7 May 2009

5340-15-053-9855
Rod End Clevis

150539855
260-12-31-1: RNCC: 3 | RNVC: 2
260-12-31-1: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-178-1339
Loop Clamp

151781339
SF260-13-70-19: RNCC: 3 | RNVC: 2

14 Feb 2005

5340-15-117-8512
Angle Bracket

151178512
SF260-16-479-01: RNCC: 3 | RNVC: 2
SF260-16-479-01: RNCC: 5 | RNVC: 9

28 Jan 1994

5340-15-007-9705
Spring Tension Clip

150079705
1-45732-80: RNCC: 3 | RNVC: 2
1-45732-80: RNCC: 5 | RNVC: 9

22 Sep 1979

5340-15-203-6766
Mounting Bracket

152036766
504383637: RNCC: 3 | RNVC: 2

24 Jun 2011

5340-15-001-8102
Rod End Clevis

150018102
98156074: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-120-3553
Angle Bracket

151203553
60146217: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-118-4426
Angle Bracket

151184426
60156126: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-187-3111
Retaining Band

151873111
UZ193: RNCC: 3 | RNVC: 2
(241)A9410UZ193: RNCC: 5 | RNVC: 2

11 Mar 2009

5340-15-130-0233
Handle Grip

151300233
18039: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-061-2210
Loop Clamp

150612210
NS4F010-2: RNCC: 3 | RNVC: 2
NS4F010-2: RNCC: 5 | RNVC: 9

21 Sep 1970

5340-15-007-3082
Loop Clamp

150073082
JJ72356: RNCC: 3 | RNVC: 2

6 Feb 1980

5340-15-133-5146
Handle Grip

151335146
4380464: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-117-4810
Vent Plug

151174810
TSFT/N1M: RNCC: 3 | RNVC: 2
164822187: RNCC: 5 | RNVC: 2
100463: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-15-199-8405
Angle Bracket

151998405
109-0821-70-107: RNCC: 3 | RNVC: 2
(241)A0126109-0821-70-107: RNCC: 5 | RNVC: 2

14 Jun 2005

5340-15-060-5691
Mending Plate

150605691
22293-101: RNCC: 3 | RNVC: 2

1 Jun 1977

5340-15-045-2855
Loop Clamp

150452855
N0R2-505-06-10B: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-107-2581
Retaining Strap

151072581
5194-212-02: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-179-6482
Angle Bracket

151796482
J53350610-002: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-122-0988
Rod End Clevis

151220988
D1406263: RNCC: 3 | RNVC: 2

24 Sep 1996

5340-15-118-3857
Mending Plate

151183857
60164079: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-120-0933
Retaining Band

151200933
41800381: RNCC: 3 | RNVC: 2

19 Dec 1994

5340-15-150-3643
Webbing Strap

151503643
A2888000: RNCC: 3 | RNVC: 2

30 Sep 1999

5340-15-153-9471
Angle Bracket

151539471
142062159: RNCC: 2 | RNVC: 3

12 Mar 2001

5340-15-118-3812
Rod End Connector

151183812
60159744: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-148-9494
Mounting Bracket

151489494
090.52: RNCC: 3 | RNVC: 2

9 Nov 1998

5340-15-007-2412
Loop Clamp

150072412
4003788: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-110-6819
Loop Clamp

151106819
4230030: RNCC: 3 | RNVC: 2

9 Jan 1990

5340-15-003-9176
Retaining Strap

150039176
182707255: RNCC: 3 | RNVC: 2
(241)A0199182707255: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-187-1363
Handwheel

151871363
R2056: RNCC: 3 | RNVC: 2

19 Feb 2009

5340-15-003-1082
Access Cover

150031082
182719641: RNCC: 3 | RNVC: 2
(241)A0199182719641: RNCC: 5 | RNVC: 2

25 Oct 2013

5340-15-121-8871
Angle Bracket

151218871
206-9320-05-8: RNCC: 3 | RNVC: 2

19 Mar 1996

5340-15-149-0913
Loop Clamp

151490913
99456498: RNCC: 3 | RNVC: 2

4 Aug 1999

5340-15-116-9120
Cushioning Pad

151169120
5004/C: RNCC: 3 | RNVC: 2

21 Apr 1994

5340-15-109-4774
Vent Plug

151094774
1Z 588568LA: RNCC: 3 | RNVC: 2
1Z 588568LA: RNCC: 5 | RNVC: 9

10 Apr 1989

5340-15-063-7840
Retaining Strap

150637840
1127/382: RNCC: 3 | RNVC: 2
77901377: RNCC: 5 | RNVC: 2

31 Mar 1982

5340-15-186-9032
Access Cover

151869032
136200: RNCC: 3 | RNVC: 2
0028453: RNCC: 5 | RNVC: 2

5 Jan 2009

5340-15-005-1900
Angle Bracket

150051900
4362233: RNCC: 3 | RNVC: 2
4362233: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-109-1808
Retaining Strap

151091808
1394792: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-061-6641
Hand Crank

150616641
49930: RNCC: 3 | RNVC: 2

12 Oct 1982

5340-15-153-8905
Access Cover

151538905
70494F01: RNCC: 3 | RNVC: 2

9 Mar 2001

5340-15-179-7351
Loop Clamp

151797351
504000061: RNCC: 3 | RNVC: 2
(241)A4249504000061: RNCC: 5 | RNVC: 2

7 Jun 2007

5340-15-147-0916
Surface Bolt

151470916
063030099: RNCC: 3 | RNVC: 2

21 Aug 1997

5340-15-203-7370
Access Cover

152037370
00231R0010: RNCC: 3 | RNVC: 2
CV173758: RNCC: 5 | RNVC: 2
00231R0010: RNCC: 5 | RNVC: 2

27 Jun 2011

5340-15-119-6425
Loop Clamp

151196425
81835: RNCC: 3 | RNVC: 2
93191504: RNCC: 5 | RNVC: 2
81835: RNCC: 5 | RNVC: 9

10 Oct 1994

5340-15-187-0406
Handwheel

151870406
723009675000: RNCC: 2 | RNVC: 3
GN10761: RNCC: 3 | RNVC: 2
(241)A0774GN10761: RNCC: 5 | RNVC: 2
(241)A1140723009675000: RNCC: 5 | RNVC: 2

2 Feb 2009

5340-15-114-4409
Retaining Strap

151144409
4834223: RNCC: 3 | RNVC: 2

12 Jun 1992

5340-15-195-8834
Mechanical Stop

151958834
157601: RNCC: 3 | RNVC: 2
(241)AJ611157601: RNCC: 5 | RNVC: 2

23 May 2011

5340-15-105-8980
Spring Tension Clip

151058980
57220: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-118-7430
Access Cover

151187430
9430939: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-108-6275
Retaining Strap

151086275
60138649: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-187-6209
Retaining Clip

151876209
BF/PC: RNCC: 3 | RNVC: 2
(241)AH405BF/PC: RNCC: 5 | RNVC: 2

15 Apr 2009

5340-15-108-1669
Bridge Clamp

151081669
1576-18-214: RNCC: 3 | RNVC: 2
157618214: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-162-2394
Mounting Plate

151622394
134899: RNCC: 3 | RNVC: 2
C650235: RNCC: 5 | RNVC: 2

17 May 2001

5340-15-119-1031
Expansion Plug

151191031
70931926: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-156-4072
Loop Clamp

151564072
142068212: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-060-5035
Spring Holder

150605035
770341W: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-001-1470
Mounting Bracket

150011470
D1-60375-001: RNCC: 3 | RNVC: 2

31 May 2013

5340-15-009-2478
Angle Bracket

150092478
P-882722-001: RNCC: 3 | RNVC: 2
P882722-001: RNCC: 5 | RNVC: 2

2 Sep 1980

5340-15-120-4883
Access Cover

151204883
142501022: RNCC: 3 | RNVC: 2

9 Jun 1995

5340-15-205-4182
Retaining Strap

152054182
178904341: RNCC: 3 | RNVC: 2
(241)A0199178904341: RNCC: 5 | RNVC: 2

8 Mar 2012

5340-15-197-6587
Screw Hook

151976587
PN UAS 00047570: RNCC: 3 | RNVC: 2
5325F76037645: RNCC: 5 | RNVC: 9

8 Apr 2004

5340-15-110-3356
Access Cover

151103356
1276-06-121: RNCC: 3 | RNVC: 2
127606121: RNCC: 5 | RNVC: 2

22 Jul 1999

5340-15-149-9116
Loop Clamp

151499116
00080383: RNCC: 3 | RNVC: 2

25 Jun 1999

5340-15-117-4007
Loop Clamp

151174007
LOOPING1: RNCC: 3 | RNVC: 2

31 Mar 1994

5340-15-110-6825
Loop Clamp

151106825
3290009: RNCC: 3 | RNVC: 2

9 Jan 1990

5340-15-154-1455
Antipilferage Seal

151541455
0-115149: RNCC: 3 | RNVC: 2
00115149: RNCC: 3 | RNVC: 2
(241)A39630-115149: RNCC: 5 | RNVC: 2
1PA39630-115149: RNCC: 5 | RNVC: 2

22 Mar 2001

5340-15-062-1692
Bail Handle

150621692
26031.0000: RNCC: 5 | RNVC: 2
4-26031.0000//D: RNCC: 5 | RNVC: 2
4-26031D: RNCC: 5 | RNVC: 2
26031.0000: RNCC: 5 | RNVC: 9
4-26031.0000//D: RNCC: 5 | RNVC: 9
4-26031D: RNCC: 5 | RNVC: 9

28 Sep 1981

5340-15-187-1467
Mounting Bracket

151871467
A73640-01-20: RNCC: 3 | RNVC: 2
0172193000: RNCC: 5 | RNVC: 2

19 Feb 2009

5340-15-004-1524
Expansion Plug

150041524
1/01584/01: RNCC: 3 | RNVC: 2
10158401: RNCC: 5 | RNVC: 2
1/01584/01: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-041-0643
Handle Grip

150410643
7-5509-100-25628-3: RNCC: 3 | RNVC: 2
7-5509-1-00-25628-3: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-002-5539
Padlock

150025539
42566584: RNCC: 3 | RNVC: 2

3 Sep 2013

5340-15-009-3276
Angle Bracket

150093276
P-884045-001: RNCC: 3 | RNVC: 2

12 Sep 1980

5340-15-116-8637
Mending Plate

151168637
D1402621: RNCC: 3 | RNVC: 2

8 Apr 1994

5340-15-179-7366
Mounting Bracket

151797366
504056221: RNCC: 3 | RNVC: 2
(241)A4249504056221: RNCC: 5 | RNVC: 2

7 Jun 2007

5340-15-155-1763
Plain Solid Disk

151551763
X0041: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-15-178-7615
Mounting Bracket

151787615
026057: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-102-1201
Retaining Band

151021201
V44/1-03-206: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-178-5765
Protection Bellows

151785765
TP8010-1/30-REF.20: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-004-2620
Clip Retainer Plate

150042620
6-12087-101-75057: RNCC: 3 | RNVC: 2

12 May 1978

5340-15-203-8575
Mounting Bracket

152038575
OMP-MLM-013: RNCC: 3 | RNVC: 2
(241)AE591OMP-MLM-013: RNCC: 5 | RNVC: 2

7 Jul 2011

5340-15-203-8580
Butt Hinge

152038580
OMP-MLM-018: RNCC: 3 | RNVC: 2
(241)AE591OMP-MLM-018: RNCC: 5 | RNVC: 2

7 Jul 2011

5340-15-007-6289
Angle Bracket

150076289
P-135578-012: RNCC: 3 | RNVC: 2
P135578-012: RNCC: 5 | RNVC: 2

8 Mar 1980

5340-15-147-3498
Access Cover

151473498
291C01223-103: RNCC: 3 | RNVC: 2

31 Oct 1997

5340-15-062-5366
Retaining Strap

150625366
168211 D: RNCC: 3 | RNVC: 2

1 May 1977

5340-15-152-9386
Stand Base

151529386
48050000001/1: RNCC: 3 | RNVC: 2

9 Nov 2000

5340-15-150-0867
Loop Clamp

151500867
014590027: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-120-2509
Leather Strap

151202509
60144948: RNCC: 3 | RNVC: 2

6 Mar 1995

5340-15-151-8677
Angle Bracket

151518677
60120177: RNCC: 3 | RNVC: 2

14 Jul 2000

5340-15-058-6101
Strap Fastener Loop

150586101
C-241291.000: RNCC: 5 | RNVC: 2
C241291C: RNCC: 5 | RNVC: 2
C-241291.000: RNCC: 5 | RNVC: 9
C241291C: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-064-4303
Angle Bracket

150644303
P-842651-001: RNCC: 3 | RNVC: 2
P842651-001: RNCC: 5 | RNVC: 2

10 Jul 1984

5340-15-005-4036
Angle Bracket

150054036
1276-09-353: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-178-2386
Mounting Plate

151782386
109-0811-73-109: RNCC: 3 | RNVC: 2

11 Mar 2005

5340-15-118-9187
Access Cover

151189187
73147765: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-055-6015
Rim Lock Set

150556015
1971TAV026: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-201-9975
Mounting Bracket

152019975
0095-A-4: RNCC: 3 | RNVC: 2

21 Jan 2007

5340-15-204-3349
Mounting Bracket

152043349
0000500428662: RNCC: 3 | RNVC: 2
(241)A39630000500428662: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-151-8094
Loop Clamp

151518094
0-109968: RNCC: 3 | RNVC: 2

13 Jul 2000

5340-15-188-1841
Access Cover

151881841
323ABE380-2: RNCC: 3 | RNVC: 2

27 Jul 2009

5340-15-060-4597
Butt Hinge

150604597
1971TAV64LL0SSIDNATDESTRA: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-170-8850
Mounting Bracket

151708850
00530051/2: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-189-4769
Loop Clamp

151894769
0380011: RNCC: 3 | RNVC: 2

25 Feb 2010

5340-15-151-4597
Mounting Bracket

151514597
UMGX0000300: RNCC: 3 | RNVC: 2

29 May 2000

5340-15-178-7821
Mounting Bracket

151787821
040681: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-118-7352
Angle Bracket

151187352
73126410: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-121-2849
Access Cover

151212849
0390302478: RNCC: 3 | RNVC: 2
0390302478: RNCC: 5 | RNVC: 2

7 Nov 1995

5340-15-118-1952
Plug Button

151181952
14624587: RNCC: 3 | RNVC: 2

22 Apr 1994

5340-15-089-7369
Mending Plate

150897369
2552: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-179-0685
Hinge Torsion Bar

151790685
16500A167220: RNCC: 3 | RNVC: 2

20 Apr 2006

5340-15-002-7874
Bow Handle

150027874
1078: RNCC: 3 | RNVC: 2

2 Oct 2013

5340-15-160-4167
Coat And Hat Hook

151604167
F720033651: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-118-4025
Angle Bracket

151184025
60167377: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-121-0857
Vent Plug

151210857
SF085-POLIP: RNCC: 3 | RNVC: 2

22 Dec 1995

5340-15-113-1451
Angle Bracket

151131451
265A0070-001: RNCC: 3 | RNVC: 2

7 Oct 1990

5340-15-192-5191
Hand Crank

151925191
74-207677A: RNCC: 3 | RNVC: 2
(241)A331474-207677A: RNCC: 5 | RNVC: 2

24 Mar 2010

5340-15-045-3189
Rod End Clevis

150453189
523-12-10-03: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-109-3753
Door Handle

151093753
5137-307-03: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-065-3906
Lock-Release Lever

150653906
1076-02-153: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-061-5596
Loop Clamp

150615596
L0PINGM0D1: RNCC: 3 | RNVC: 2

17 May 1977

5340-15-149-2990
Angle Bracket

151492990
4882797: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-118-3647
Mending Plate

151183647
60141395: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-119-1372
Angle Bracket

151191372
73125010: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-003-1363
Mounting Bracket

150031363
5949790709: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-120-0205
Angle Bracket

151200205
73061395: RNCC: 3 | RNVC: 2

5 Dec 1994

5340-15-193-2205
Loop Clamp

151932205
504195052: RNCC: 3 | RNVC: 2

20 Apr 2010

5340-15-101-8073
Butt Hinge Leaf

151018073
808-41092-8: RNCC: 3 | RNVC: 2

12 Nov 1987

5340-15-005-5330
Catch Strike

150055330
1137-05-341: RNCC: 3 | RNVC: 2

20 Nov 1978

5340-15-180-0388
Mounting Bracket

151800388
40G106000V: RNCC: 3 | RNVC: 2

16 Nov 2007

5340-15-045-0379
Screw Thread Insert

150450379
3200-04: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-150-3249
Mounting Bracket

151503249
21491019: RNCC: 3 | RNVC: 2

29 Sep 1999

5340-15-100-8946
Butt Hinge Leaf

151008946
109-0640-50-137: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-15-178-7387
Butt Hinge

151787387
022647: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-059-3597
Retaining Strap

150593597
1127-40-314: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-007-0788
Retaining Ring

150070788
0-07154: RNCC: 3 | RNVC: 2

29 Jun 1979

5340-15-064-1167
Rod End Clevis

150641167
NOR5-225-18-7G: RNCC: 3 | RNVC: 2

4 Jan 1982

5340-15-179-6814
Mounting Bracket

151796814
0000500404404: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-062-5346
Retaining Strap

150625346
168211 D: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-003-0216
Luggage Handle

150030216
M0003157: RNCC: 3 | RNVC: 2
(241)A0810M0003157: RNCC: 5 | RNVC: 2

24 Oct 2013

5340-15-064-4589
Angle Bracket

150644589
1397457: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-117-1948
Angle Bracket

151171948
190507128: RNCC: 3 | RNVC: 2

2 Sep 1993

5340-15-118-8597
Mounting Bracket

151188597
299701674B: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-118-8596
Mounting Bracket

151188596
299701673F: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-002-3294
Loop Clamp

150023294
412-4600-15-101: RNCC: 3 | RNVC: 2

7 Aug 2013

5340-15-116-5225
Access Cover

151165225
60304-104: RNCC: 3 | RNVC: 2

18 Nov 1993

5340-15-001-1719
Mounting Plate

150011719
D8408482: RNCC: 3 | RNVC: 2

3 Jun 2013

5340-15-004-0542
Butt Hinge Leaf

150040542
1137-05-340: RNCC: 3 | RNVC: 2

30 May 1977

5340-15-201-2876
Retaining Strap

152012876
162530146: RNCC: 3 | RNVC: 2

20 Jul 2006

5340-15-202-3118
Self-Locking Insert

152023118
6311053: RNCC: 3 | RNVC: 2
160908: RNCC: 4 | RNVC: 1
(241)A44476311053: RNCC: 5 | RNVC: 2

27 Feb 2007

5340-15-179-7256
Mounting Bracket

151797256
41233508: RNCC: 3 | RNVC: 2
(241)A424941233508: RNCC: 5 | RNVC: 2

7 Jun 2007

5340-15-164-6466
Angle Bracket

151646466
4771269: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-164-2640
Angle Bracket

151642640
7426280: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-151-9607
Loop Clamp

151519607
0-168566: RNCC: 3 | RNVC: 2

27 Jul 2000

5340-15-119-1012
Access Cover

151191012
73066760: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-180-9874
Mortise Lock Set

151809874
095715215: RNCC: 3 | RNVC: 2
(241)A1782095715215: RNCC: 5 | RNVC: 2

12 Sep 2008

5340-15-164-6465
Angle Bracket

151646465
4765961: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-116-2309
Screw Thread Insert

151162309
M8(X1,25)X1,5D: RNCC: 3 | RNVC: 2
210602534: RNCC: 5 | RNVC: 2

30 Mar 1993

5340-15-163-3764
Bridge Clamp

151633764
9435908: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-116-4767
Butt Hinge Leaf

151164767
60165663: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-230-5194
Handle Grip

152305194
I.307/30B-M10: RNCC: 3 | RNVC: 2

19 Jul 2007

5340-15-073-8758
Rim Lock

150738758
39A100X70: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-061-1121
Angle Bracket

150611121
70-885-410: RNCC: 3 | RNVC: 2
70-885-410: RNCC: 5 | RNVC: 9

16 Apr 1978

5340-15-065-8868
Angle Bracket

150658868
P-120191-003: RNCC: 3 | RNVC: 2
P120191-003: RNCC: 5 | RNVC: 2

6 Nov 1985

5340-15-118-6536
Expansion Plug

151186536
70921442: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-008-3589
Webbing Strap

150083589
330-0244/01: RNCC: 3 | RNVC: 2

4 May 1981

5340-15-202-3557
Screw Thread Insert

152023557
DDEF2574-04: RNCC: 3 | RNVC: 2

28 Feb 2007

5340-15-117-4881
Retaining Strap

151174881
21366-001D00: RNCC: 3 | RNVC: 2

27 Oct 1993

5340-15-066-4677
Rod End Clevis

150664677
64101-101: RNCC: 3 | RNVC: 2

23 Jan 1986

5340-15-006-1415
Retaining Strap

150061415
69551-101A1: RNCC: 3 | RNVC: 2

1 Oct 1979

5340-15-109-3730
Mending Plate

151093730
5137-294-41: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-060-1822
Clip Retainer Plate

150601822
5027-12: RNCC: 3 | RNVC: 2

7 Dec 1976

5340-15-054-8830
Retaining Strap

150548830
AF107-08A183: RNCC: 3 | RNVC: 2
AF 106-08A-183: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-150-1052
Mounting Bracket

151501052
120015262: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-004-4167
Retaining Strap

150044167
7-67051-000-74096: RNCC: 3 | RNVC: 2

8 May 1978

5340-15-177-3064
Mounting Bracket

151773064
P-842703-003: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-145-1952
Plug Button

151451952
999-5001-10-128: RNCC: 3 | RNVC: 2

2 Jun 1997

5340-15-121-6121
Loop Clamp

151216121
8B0067610: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-203-1467
Latch Bar

152031467
212-1300-38-109: RNCC: 3 | RNVC: 2

27 Nov 2007

5340-15-007-8976
Expansion Plug

150078976
1-42824-70: RNCC: 3 | RNVC: 2
0-950376: RNCC: 5 | RNVC: 2
14282470: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-116-4816
Angle Bracket

151164816
60150598: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-119-1292
Mending Plate

151191292
73122862: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-109-7231
Retaining Strap

151097231
60138799: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-124-6784
Handle Grip

151246784
42030292: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-155-9665
Angle Bracket

151559665
500344426: RNCC: 3 | RNVC: 2

17 Oct 2002

5340-15-121-4346
Access Cover

151214346
553802291000: RNCC: 3 | RNVC: 2
538-02-2910: RNCC: 5 | RNVC: 2

17 Oct 1996

5340-15-180-4268
Access Cover

151804268
205-1600-10-271: RNCC: 3 | RNVC: 2
(241)A0126205-1600-10-271: RNCC: 5 | RNVC: 2

20 May 2008

5340-15-005-3777
Rod End Clevis

150053777
7-66143-101-76425A1: RNCC: 3 | RNVC: 2

29 Jan 1979

5340-15-062-7257
Angle Bracket

150627257
1376-81-113: RNCC: 3 | RNVC: 2
137681113: RNCC: 5 | RNVC: 2

1 Jun 1987

5340-15-150-1015
Mounting Bracket

151501015
120009302: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-117-6391
Access Cover

151176391
142507900: RNCC: 3 | RNVC: 2

4 Jan 1994

5340-15-112-8113
Vent Plug

151128113
469125: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-157-4766
Bow Handle

151574766
(241)S346520000-599: RNCC: 3 | RNVC: 2
2 0000-599: RNCC: 3 | RNVC: 2

7 Aug 2003

5340-15-007-5146
Screw Thread Insert

150075146
1139-02-140: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-005-5329
Catch Strike

150055329
1137-05-335: RNCC: 3 | RNVC: 2

20 Nov 1978

5340-15-206-3564
Mounting Bracket

152063564
50040 6181: RNCC: 3 | RNVC: 2

4 Jun 2012

5340-15-162-4101
Mounting Bracket

151624101
8785.105: RNCC: 3 | RNVC: 2

16 Aug 2001

5340-15-116-4764
Butt Hinge Leaf

151164764
60165636: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-120-4836
Access Cover

151204836
142519255: RNCC: 3 | RNVC: 2

9 Jun 1995

5340-15-119-0104
Angle Bracket

151190104
70079507: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-103-6360
Stake Driving Cap

151036360
42080702A: RNCC: 3 | RNVC: 2

26 Nov 1987

5340-15-118-0910
Valve Seat

151180910
D0485489: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-112-3426
Angle Bracket

151123426
60149130: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-073-5234
Rim Lock

150735234
39B75X30CR: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-001-8243
Mounting Bracket

150018243
5949784060: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-181-3689
Metal Grille

151813689
2C1144IS0024: RNCC: 3 | RNVC: 2
(241)A29802C1144IS0024: RNCC: 5 | RNVC: 2

10 Dec 2008

5340-15-179-7356
Mounting Plate

151797356
504067009: RNCC: 3 | RNVC: 2
(241)A4249504067009: RNCC: 5 | RNVC: 2

7 Jun 2007

5340-15-119-6578
Access Door Hinge

151196578
109-0311-64-104: RNCC: 3 | RNVC: 2

12 Oct 1994

5340-15-155-5701
Access Cover

151555701
206-5400-02-5: RNCC: 3 | RNVC: 2

12 Apr 2002

5340-15-118-9179
Mounting Bracket

151189179
73146034: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-122-1611
Mounting Bracket

151221611
145500153: RNCC: 3 | RNVC: 2

28 May 1996

5340-15-188-3522
Flush Lock

151883522
3W9803: RNCC: 3 | RNVC: 2

3 Sep 2009

5340-15-178-9381
Mounting Bracket

151789381
NR003MD007AA00: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-15-064-4195
Screw Thread Insert

150644195
F492D2A-4: RNCC: 3 | RNVC: 2
F492D2A-4: RNCC: 5 | RNVC: 2

1 Mar 1984

5340-15-193-7249
Protection Bellows

151937249
504066612: RNCC: 3 | RNVC: 2

2 Jul 2010

5340-15-201-2963
Filler Opening Cap

152012963
122621944: RNCC: 3 | RNVC: 2

20 Jul 2006

5340-15-118-3644
Angle Bracket

151183644
60142125: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-180-1050
Access Door Hinge

151801050
555530018000: RNCC: 3 | RNVC: 2

28 Jan 2008

5340-15-000-7304
Support Hook

150007304
50030062: RNCC: 3 | RNVC: 2

4 Apr 2013

5340-15-002-3514
Clamping Catch

150023514
504376097: RNCC: 3 | RNVC: 2

16 Aug 2013

5340-15-204-4272
Mounting Plate

152044272
26HJ04143043S01-425/011: RNCC: 3 | RNVC: 2
(241)A001926HJ04143043S01-425/01: RNCC: 5 | RNVC: 2

4 Nov 2011

5340-15-064-7106
Butt Hinge Leaf

150647106
01-245-E-091: RNCC: 3 | RNVC: 2

24 Jun 1984

5340-15-003-1597
Mounting Bracket

150031597
99366200: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-068-0802
Mending Plate

150680802
475.702.050.4: RNCC: 3 | RNVC: 2
91656342: RNCC: 5 | RNVC: 2

15 Oct 1982

5340-15-102-4512
Butt Hinge

151024512
213A7341-403: RNCC: 3 | RNVC: 2

30 Aug 1988

5340-15-060-0904
Screw Thread Insert

150600904
05522-101: RNCC: 3 | RNVC: 2

28 Dec 1976

5340-15-149-8745
Rod End Connector

151498745
3534GR87: RNCC: 3 | RNVC: 2
(241)A00763534GR87: RNCC: 5 | RNVC: 2
3534GR87: RNCC: 5 | RNVC: 9

16 Jun 1999

5340-15-109-1788
Retaining Strap

151091788
60112827: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-119-4023
Angle Bracket

151194023
60170419: RNCC: 3 | RNVC: 2

25 Jul 1994

5340-15-204-9014
Access Cover

152049014
71.1500.22: RNCC: 3 | RNVC: 2

25 Jan 2012

5340-15-188-7654
Drift Bolt

151887654
MOR3536480CH: RNCC: 3 | RNVC: 2
(241)AG622MOR3536480CH: RNCC: 5 | RNVC: 2

13 Nov 2009

5340-15-004-9081
Retaining Strap

150049081
4540404419: RNCC: 3 | RNVC: 2

20 May 1978

5340-15-193-6831
Handle Grip

151936831
163107124: RNCC: 3 | RNVC: 2
163107124: RNCC: 5 | RNVC: 2
(241)A0199163107124: RNCC: 5 | RNVC: 2
5340PL1034547: RNCC: 6 | RNVC: 9

28 Jun 2010

5340-15-175-1289
Angle Bracket

151751289
S61-0920-13-134: RNCC: 3 | RNVC: 2

16 Jan 2004

5340-15-179-7004
Mounting Plate

151797004
0000500404537: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-110-5420
Angle Bracket

151105420
302-043/33: RNCC: 3 | RNVC: 2
302-043/33: RNCC: 5 | RNVC: 9

7 Sep 1989

5340-15-153-3969
Plain Solid Disk

151533969
5137-402-05: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-153-7065
Access Cover

151537065
142012904: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-169-1269
Coat And Hat Hook

151691269
F72006709: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-109-0844
Angle Bracket

151090844
60134480: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-151-8681
Angle Bracket

151518681
60120179: RNCC: 3 | RNVC: 2

14 Jul 2000

5340-15-109-7397
Retaining Strap

151097397
60132423: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-006-8849
Loop Clamp

150068849
N0R2-505-05-12A: RNCC: 3 | RNVC: 2

30 May 1980

5340-15-170-4468
Retaining Strap

151704468
109-0310-27-196: RNCC: 3 | RNVC: 2

16 Jan 2003

5340-15-008-5507
Retaining Strap

150085507
168234 C: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-205-4639
Rod End Clevis

152054639
42533653: RNCC: 3 | RNVC: 2
(241)A424942533653: RNCC: 5 | RNVC: 2

12 Mar 2012

5340-15-107-4431
Rod End Clevis

151074431
1P 531734: RNCC: 3 | RNVC: 2
1P 531734: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-126-0457
Angle Bracket

151260457
954502: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-063-3187
Angle Bracket

150633187
60102133: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-118-3630
Angle Bracket

151183630
60140256: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-001-1178
Access Cover

150011178
800-9296: RNCC: 3 | RNVC: 2

31 May 2013

5340-15-112-2564
Access Door Hinge

151122564
311A7572-001: RNCC: 3 | RNVC: 2

2 Mar 1991

5340-15-063-2508
Mending Plate

150632508
1376-18-454: RNCC: 3 | RNVC: 2
137618454: RNCC: 5 | RNVC: 2

1 Jun 1987

5340-15-054-8151
Spring Tension Clip

150548151
32-83-110: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-102-1042
Access Door Hinge

151021042
193-0484/28: RNCC: 3 | RNVC: 2

22 Jun 1986

5340-15-109-1844
Angle Bracket

151091844
60103591: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-116-4769
Butt Hinge Leaf

151164769
60165668: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-206-7910
Mounting Bracket

152067910
191100258: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-207-8584
Mounting Bracket

152078584
504358622: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-121-3680
Bow Handle

151213680
0.050.459.9: RNCC: 3 | RNVC: 2

16 Jul 1996

5340-15-107-5356
Retaining Strap

151075356
SR 1712: RNCC: 3 | RNVC: 2

22 Mar 1988

5340-15-102-4752
Retaining Clip

151024752
01-261-10-154: RNCC: 3 | RNVC: 2

19 Feb 1987

5340-15-063-3224
Retaining Strap

150633224
60107961: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-150-2376
Mending Plate

151502376
A0129300: RNCC: 3 | RNVC: 2

27 Aug 1999

5340-15-178-0729
Filler Opening Cap

151780729
C2866131: RNCC: 3 | RNVC: 2

14 Feb 2005

5340-15-100-7631
Access Door Hinge

151007631
109-0640-49-33: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-15-196-8961
Retaining Band

151968961
PN UAS 00044063: RNCC: 3 | RNVC: 2
3470F76036642: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-150-0917
Mounting Plate

151500917
026080081: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-128-3865
Expansion Plug

151283865
1-01603-00: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-154-2022
Angle Bracket

151542022
0-168273: RNCC: 3 | RNVC: 2
00168273: RNCC: 3 | RNVC: 2
1PA39630-168273: RNCC: 5 | RNVC: 2
(241)A39630-168273: RNCC: 5 | RNVC: 2

28 Mar 2001

5340-15-073-5620
Flush Lock

150735620
19880-035: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-003-7624
Exit Bolt

150037624
8452: RNCC: 3 | RNVC: 2

21 Nov 2013

5340-15-198-4113
Access Cover

151984113
122505046: RNCC: 3 | RNVC: 2

27 Sep 2004

5340-15-007-5440
Rod End Clevis

150075440
01510B: RNCC: 3 | RNVC: 2

27 Mar 1980

5340-15-179-6970
Mounting Bracket

151796970
0000500404594: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-179-6592
Mounting Bracket

151796592
321232F91: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-111-9498
Butt Hinge Leaf

151119498
700A2603-005: RNCC: 3 | RNVC: 2

30 Jan 1991

5340-15-113-1457
Retaining Strap

151131457
266A0142-001: RNCC: 3 | RNVC: 2

7 Oct 1990

5340-15-115-7447
Mending Plate

151157447
210300/5: RNCC: 3 | RNVC: 2

3 Sep 1993

5340-15-207-8689
Access Cover

152078689
504372676: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-000-4362
Loop Clamp

150004362
425103005012: RNCC: 3 | RNVC: 2

1 Mar 2013

5340-15-118-9242
Mending Plate

151189242
73154653: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-157-1793
Loop Clamp

151571793
A071A016NB: RNCC: 3 | RNVC: 2
(241)A0126A071A016NB: RNCC: 5 | RNVC: 2

15 May 2003

5340-15-001-8421
Mounting Bracket

150018421
500423836: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-178-6278
Mounting Plate

151786278
N5155T: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-114-1774
Plug Button

151141774
9431644: RNCC: 3 | RNVC: 2

19 May 1992

5340-15-105-8384
Retaining Band

151058384
0121: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-118-8617
Access Cover

151188617
299709562G: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-120-1428
Butt Hinge

151201428
113A6031-755: RNCC: 3 | RNVC: 2

16 Jan 1995

5340-15-201-4714
Loop Clamp

152014714
TA028M015NB40: RNCC: 3 | RNVC: 2
A079A040NB: RNCC: 3 | RNVC: 2
(241)A0126A079A040NB: RNCC: 5 | RNVC: 2

26 Sep 2006

5340-15-002-1371
Mounting Bracket

150021371
5801496606: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-162-4103
Mounting Bracket

151624103
8900.327: RNCC: 3 | RNVC: 2

16 Aug 2001

5340-15-062-7919
Angle Bracket

150627919
0-34169: RNCC: 3 | RNVC: 2

28 Aug 1982

5340-15-107-2545
Spring Tension Clip

151072545
2544-145: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-105-8388
Retaining Band

151058388
22978: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-151-7356
Angle Bracket

151517356
0-179848: RNCC: 3 | RNVC: 2

4 Jul 2000

5340-15-179-6965
Angle Bracket

151796965
0000500401983: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-118-1736
Rod End Clevis

151181736
10007871: RNCC: 3 | RNVC: 2

20 Apr 1994

5340-15-103-6796
Mending Plate

151036796
24009456A: RNCC: 3 | RNVC: 2

26 Nov 1987

5340-15-186-9019
Mounting Bracket

151869019
504090943: RNCC: 3 | RNVC: 2
0028276: RNCC: 5 | RNVC: 2
504090943: RNCC: 5 | RNVC: 2
504090943: RNCC: 5 | RNVC: 9

5 Jan 2009

5340-15-103-0183
Strap Hinge

151030183
79036804: RNCC: 3 | RNVC: 2

21 Jun 1987

5340-15-150-2365
Access Cover

151502365
A0121800: RNCC: 3 | RNVC: 2

27 Aug 1999

5340-15-008-0792
Retaining Strap

150080792
60113882: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-001-8216
Mounting Bracket

150018216
5949784406: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-187-4432
Mounting Plate

151874432
109-0343-75-111: RNCC: 3 | RNVC: 2

31 Mar 2009

5340-15-163-4573
Bail Handle

151634573
17H-329A01000-013-101: RNCC: 3 | RNVC: 2

24 Sep 2002

5340-15-118-3666
Mending Plate

151183666
60143038: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-206-3563
Mounting Plate

152063563
500406327: RNCC: 3 | RNVC: 2

4 Jun 2012

5340-15-152-6750
Bow Handle

151526750
0-179575: RNCC: 3 | RNVC: 2

10 Oct 2000

5340-15-148-4599
Caster Wheel

151484599
02DIS17.0: RNCC: 3 | RNVC: 2

13 Aug 1998

5340-15-148-9833
Mounting Bracket

151489833
858 94: RNCC: 3 | RNVC: 2
858 94: RNCC: 5 | RNVC: 9

9 Nov 1998

5340-15-207-0718
Mending Plate

152070718
M3-X: RNCC: 3 | RNVC: 2

31 Aug 2012

5340-15-054-1443
Mortise Lock Set

150541443
3514: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-009-2004
Loop Clamp

150092004
1372155: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-073-5248
Flush Lock

150735248
13A65X70-1LEVA: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-117-9354
Mending Plate

151179354
142512163: RNCC: 3 | RNVC: 2

8 Feb 1994

5340-15-006-9058
Loop Clamp

150069058
39X500-12-01-23: RNCC: 3 | RNVC: 2

2 Jan 1979

5340-15-168-9633
Coat And Hat Hook

151689633
F72003365: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-002-1401
Mounting Bracket

150021401
5801403125: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-111-2784
Mending Plate

151112784
2007TAV4-5: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-180-3860
Mounting Bracket

151803860
500326896: RNCC: 3 | RNVC: 2
(241)A4249500326896: RNCC: 5 | RNVC: 2

7 May 2008

5340-15-100-9902
Lock-Release Lever

151009902
808-91777-2: RNCC: 3 | RNVC: 2

1 Jul 1987

5340-15-179-0960
Mounting Plate

151790960
140000: RNCC: 3 | RNVC: 2

13 Jun 2006

5340-15-117-5293
Angle Bracket

151175293
593919538.1: RNCC: 3 | RNVC: 2
93159921: RNCC: 5 | RNVC: 2
593919538.1: RNCC: 5 | RNVC: 2

8 Nov 1993

5340-15-119-1164
Mounting Bracket

151191164
73111598: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-119-1109
Loop Clamp

151191109
70936039: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-122-2619
Loop Clamp

151222619
800034002: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-119-0753
Loop Clamp

151190753
70927175: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-003-1291
Snap Hook

150031291
T.S.PD.M: RNCC: 3 | RNVC: 2
(241)AJ720T.S.PD.M: RNCC: 5 | RNVC: 2

28 Oct 2013

5340-15-195-8668
Mounting Bracket

151958668
9063260481: RNCC: 3 | RNVC: 2
(241)AJ6119063260481: RNCC: 5 | RNVC: 2

23 May 2011

5340-15-187-8202
Mounting Bracket

151878202
018.066.00.38: RNCC: 3 | RNVC: 2
018.066.00.38: RNCC: 5 | RNVC: 2
(241)A6479018.066.00.38: RNCC: 5 | RNVC: 2

7 May 2009

5340-15-110-6387
Angle Bracket

151106387
67300400: RNCC: 3 | RNVC: 2
0-111001: RNCC: 5 | RNVC: 2

16 Mar 1990

5340-15-179-6827
Mounting Bracket

151796827
0000500401325: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-179-9417
Mounting Plate

151799417
504239313: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-148-1968
Vent Plug

151481968
1190 3/4 IN.C/P: RNCC: 3 | RNVC: 2
2407601: RNCC: 5 | RNVC: 2
2-74510: RNCC: 5 | RNVC: 2

1 Jul 1998

5340-15-054-1322
Rod End Clevis

150541322
260-14-47-01: RNCC: 3 | RNVC: 2
260-14-47-01: RNCC: 5 | RNVC: 9

31 Dec 1970

5340-15-059-3575
Retaining Strap

150593575
1127-40-326: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-179-1376
Expansion Plug

151791376
500356932: RNCC: 3 | RNVC: 2
(241)A4249500356932: RNCC: 5 | RNVC: 2

13 Jun 2006

5340-15-107-2854
Angle Bracket

151072854
70999: RNCC: 3 | RNVC: 2

20 Apr 1994

5340-15-000-4332
Retaining Band

150004332
4260036140N: RNCC: 3 | RNVC: 2

1 Mar 2013

5340-15-115-6247
Expansion Plug

151156247
2308-23313: RNCC: 3 | RNVC: 2

17 Dec 1992

5340-15-119-8647
Access Cover

151198647
55.15.07: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-051-3252
Retaining Strap

150513252
4014116: RNCC: 3 | RNVC: 2
4014116: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-187-4266
Loop Clamp

151874266
17316399: RNCC: 3 | RNVC: 2
(7001)5340151874266(241)A4249173: RNCC: 5 | RNVC: 2

30 Mar 2009

5340-15-187-6297
Mounting Bracket

151876297
504135428: RNCC: 3 | RNVC: 2

15 Apr 2009

5340-15-051-5083
Retaining Strap

150515083
T2I222C: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-119-1876
Access Cover

151191876
75214910: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-163-8080
Angle Bracket

151638080
4852695: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-162-0394
Retaining Clip

151620394
B21-106: RNCC: 3 | RNVC: 2

15 Nov 2000

5340-15-179-6478
Angle Bracket

151796478
J53350620-004: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-102-8535
Butt Hinge Leaf

151028535
213A7191-001: RNCC: 3 | RNVC: 2

16 Dec 1988

5340-15-144-7930
Metal Grille

151447930
GRG-CL2000: RNCC: 3 | RNVC: 2

24 Jan 1997

5340-15-197-7164
Protection Bellows

151977164
129-0031-07-103: RNCC: 3 | RNVC: 2

21 Apr 2004

5340-15-066-0397
Retaining Strap

150660397
1127-36-293: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-111-9501
Butt Hinge

151119501
700A3603-401: RNCC: 3 | RNVC: 2

30 Jan 1991

5340-15-051-2555
Angle Bracket

150512555
TM492333-1290: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-101-8086
Butt Hinge Leaf

151018086
808-44111-15: RNCC: 3 | RNVC: 2

12 Nov 1987

5340-15-058-4009
Retaining Strap

150584009
553816147000: RNCC: 2 | RNVC: 3
538-16-1470: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-163-4648
Access Cover

151634648
635C01490-001: RNCC: 3 | RNVC: 2

30 Jul 2003

5340-15-061-2501
Rod End Connector

150612501
93588-101: RNCC: 3 | RNVC: 2

1 Sep 1977

5340-15-152-9933
Retaining Band

151529933
301-4615-00: RNCC: 3 | RNVC: 2

13 Nov 2000

5340-15-058-6977
Access Door Hinge

150586977
204-1500-25-1: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-153-3927
Mending Plate

151533927
5137-329-05: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-110-8544
Screw Thread Insert

151108544
2100-06-303: RNCC: 3 | RNVC: 2
2100-06-323: RNCC: 3 | RNVC: 2
2106-02507: RNCC: 3 | RNVC: 2
M 8 X125 1D22: RNCC: 5 | RNVC: 2

30 Jan 1990

5340-15-009-2899
Spring Tension Clip

150092899
8-3645-400-25817-3: RNCC: 3 | RNVC: 2

12 Sep 1980

5340-15-188-0271
Mounting Bracket

151880271
CPM500-09-J1-STLC: RNCC: 3 | RNVC: 2
(241)AFA41CPM500-09-J1-STLC: RNCC: 5 | RNVC: 2

19 Jun 2009

5340-15-007-4994
Mending Plate

150074994
1139-05-130: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-007-9859
Retaining Strap

150079859
4641875: RNCC: 3 | RNVC: 2
0-48899: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-178-7671
Mounting Bracket

151787671
040118: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-045-2852
Loop Clamp

150452852
N0R2-505-05-22B: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-060-1500
Angle Bracket

150601500
1376-19-126: RNCC: 3 | RNVC: 2
137619126: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-005-2068
Handle Grip

150052068
541-33-1690: RNCC: 3 | RNVC: 2

16 Sep 1980

5340-15-007-4988
Lock-Release Lever

150074988
1239-05-900: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-107-1179
Lock-Release Lever

151071179
301-01-8080: RNCC: 3 | RNVC: 2

14 Apr 1987

5340-15-179-0796
Mounting Bracket

151790796
VTB003102EWK-HW01: RNCC: 3 | RNVC: 2

13 Jun 2006

5340-15-145-2322
Access Cover

151452322
305CA310-1TR2: RNCC: 3 | RNVC: 2

2 Jun 1997

5340-15-109-3770
Angle Bracket

151093770
5137-262-11: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-153-3965
Mending Plate

151533965
5137-389-06: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-060-0990
Spring Tension Clip

150600990
04218-001: RNCC: 3 | RNVC: 2

8 Dec 1976

5340-15-115-9119
Butt Hinge Leaf

151159119
NOR2-481-02: RNCC: 3 | RNVC: 2

1 Feb 1993

5340-15-180-4256
Access Cover

151804256
205-1600-10-163: RNCC: 3 | RNVC: 2
(241)A0126205-1600-10-163: RNCC: 5 | RNVC: 2

20 May 2008

5340-15-147-3663
Access Cover

151473663
999-0500-44-290: RNCC: 3 | RNVC: 2

31 Oct 1997

5340-15-147-5980
Access Cover

151475980
834691-01: RNCC: 3 | RNVC: 2
834691-01: RNCC: 5 | RNVC: 9

30 Dec 1997

5340-15-107-6866
Lock-Release Lever

151076866
1576-23-199: RNCC: 3 | RNVC: 2
157623199: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-060-1441
Leather Strap

150601441
02-231E50-10: RNCC: 2 | RNVC: 2

18 Apr 1977

5340-15-113-0813
Plug Button

151130813
999-5001-10-131: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-15-059-3596
Retaining Strap

150593596
1127-40-316: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-113-5442
Angle Bracket

151135442
377A1229-001: RNCC: 3 | RNVC: 2

14 Jan 1992

5340-15-193-3815
Loop Clamp

151933815
504269857: RNCC: 3 | RNVC: 2
(241)A4249504269857: RNCC: 5 | RNVC: 2

11 May 2010

5340-15-187-5575
Bow Handle

151875575
TAF-0012/01: RNCC: 3 | RNVC: 2

9 Apr 2009

5340-15-007-0129
Spring Tension Clip

150070129
6-73709-101-72846: RNCC: 3 | RNVC: 2

28 Jan 1980

5340-15-074-3998
Retaining Strap

150743998
16UNI2137: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-231-7129
Handle Grip

152317129
71419182: RNCC: 3 | RNVC: 2
383015E103508: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-148-5793
Butt Hinge Leaf

151485793
129-0340-01-365: RNCC: 3 | RNVC: 2

31 Aug 1998

5340-15-061-2488
Access Door Hinge

150612488
27523-101: RNCC: 3 | RNVC: 2

31 Aug 1977

5340-15-057-4396
Retaining Band

150574396
204-9000-07-7: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-100-1961
Spring Holder

151001961
88331-14B: RNCC: 3 | RNVC: 2

29 Sep 1985

5340-15-151-9632
Angle Bracket

151519632
0-173678: RNCC: 3 | RNVC: 2
00173678: RNCC: 3 | RNVC: 2
(241)A39630-173678: RNCC: 5 | RNVC: 2

27 Jul 2000

5340-15-202-8215
Rim Lock

152028215
65068601: RNCC: 3 | RNVC: 2
(241)A413265068601: RNCC: 5 | RNVC: 2

18 Jul 2007

5340-15-152-5256
Loop Clamp

151525256
60187097: RNCC: 3 | RNVC: 2

20 Sep 2000

5340-15-073-8760
Rim Lock

150738760
39B90X60: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-205-2186
Metal Grille

152052186
821VN5076: RNCC: 3 | RNVC: 2
(241)A0199821VN5076: RNCC: 5 | RNVC: 2

27 Feb 2012

5340-15-187-9511
Mounting Bracket

151879511
20.11.08.10: RNCC: 3 | RNVC: 2

3 Jun 2009

5340-15-108-5120
Strap Hinge

151085120
82173: RNCC: 3 | RNVC: 2
4696894: RNCC: 5 | RNVC: 2
04696894: RNCC: 5 | RNVC: 2

14 Jun 1988

5340-15-179-2470
Loop Clamp

151792470
500332605: RNCC: 3 | RNVC: 2
(241)A4249500332605: RNCC: 5 | RNVC: 2

10 Aug 2006

5340-15-122-2808
Loop Clamp

151222808
800057224: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-115-7471
Rod End Clevis

151157471
271003/3: RNCC: 3 | RNVC: 2

3 Sep 1993

5340-15-177-3742
Bridge Clamp

151773742
026204: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-003-1429
Mounting Bracket

150031429
5949791488: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-001-5879
Mounting Bracket

150015879
5801449240: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-118-4587
Loop Clamp

151184587
60152177: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-004-3850
Retaining Strap

150043850
0-31428: RNCC: 3 | RNVC: 2

7 Sep 1977

5340-15-163-3805
Bridge Clamp

151633805
9449144: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-064-5614
Flush Catch

150645614
01-245-E-145: RNCC: 3 | RNVC: 2

23 Jun 1984

5340-15-154-4042
Angle Bracket

151544042
A6120-91094-4: RNCC: 3 | RNVC: 2

22 May 2001

5340-15-045-3908
Loop Clamp

150453908
N0R2-505-06-5B: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-060-1498
Angle Bracket

150601498
1026-04-186: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-187-5438
Bow Handle

151875438
E5346.0000: RNCC: 3 | RNVC: 2

9 Apr 2009

5340-15-149-9097
Access Cover

151499097
D0R0101714: RNCC: 3 | RNVC: 2

19 Jul 1999

5340-15-177-3706
Mounting Plate

151773706
022976: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-199-6694
Protection Bellows

151996694
98408940: RNCC: 3 | RNVC: 2
(241)A424998408940: RNCC: 5 | RNVC: 2

17 May 2005

5340-15-059-3723
Retaining Strap

150593723
1127-27-176: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-107-1029
Handle Grip

151071029
301-01-0880: RNCC: 3 | RNVC: 2

14 Apr 1987

5340-15-002-6752
Arched Cushion

150026752
RAP-6950/35: RNCC: 3 | RNVC: 2

25 Sep 2013

5340-15-117-6759
Retaining Strap

151176759
22826-001B00: RNCC: 3 | RNVC: 2

10 Jan 1994

5340-15-066-4680
Retaining Strap

150664680
66853-001: RNCC: 3 | RNVC: 2

23 Jan 1986

5340-15-178-5343
Mounting Bracket

151785343
141-4002/01: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-170-4895
Vent Plug

151704895
1190-419: RNCC: 3 | RNVC: 2
5460 LEGEND 43: RNCC: 5 | RNVC: 2
5460/43: RNCC: 5 | RNVC: 2
2-74500: RNCC: 5 | RNVC: 2

3 Mar 2003

5340-15-110-1809
Plain Solid Disk

151101809
518392-01: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-073-5265
Flush Lock

150735265
73-70X78: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-204-6947
Block Clamp

152046947
109-0515-58-129: RNCC: 3 | RNVC: 2

13 Dec 2011

5340-15-063-9917
Angle Bracket

150639917
1355-05-151: RNCC: 3 | RNVC: 2

16 Dec 1983

5340-15-207-4130
Loop Clamp

152074130
NS4F011-3A: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-15-193-6920
Blank Panel

151936920
109-0714-97-101: RNCC: 3 | RNVC: 2

30 Jun 2010

5340-15-151-1136
Mounting Bracket

151511136
380-2055/01: RNCC: 3 | RNVC: 2

21 Mar 2000

5340-15-063-2511
Mending Plate

150632511
1376-53-106: RNCC: 3 | RNVC: 2
137653106: RNCC: 5 | RNVC: 2

1 Jun 1987

5340-15-059-9607
Retaining Strap

150599607
63081-101: RNCC: 3 | RNVC: 2

23 Nov 1976

5340-15-198-5846
Block Clamp

151985846
AIT13901EEEE5790: RNCC: 3 | RNVC: 2
TA30500763-18: RNCC: 8 | RNVC: 2

15 Oct 2004

5340-15-009-9023
Angle Bracket

150099023
1236-31-102: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-152-0175
Angle Bracket

151520175
0-163682: RNCC: 3 | RNVC: 2
00163682: RNCC: 3 | RNVC: 2
(241)A39630-163682: RNCC: 5 | RNVC: 2

2 Aug 2000

5340-15-170-2826
Plug Button

151702826
205-8130-12-5: RNCC: 3 | RNVC: 2

13 Nov 2002

5340-15-064-0622
T Plate

150640622
64119-101: RNCC: 3 | RNVC: 2

27 Nov 1983

5340-15-188-4362
Access Cover

151884362
P-894885-003: RNCC: 3 | RNVC: 2

14 Sep 2009

5340-15-113-4431
Butt Hinge Leaf

151134431
68-307101-018: RNCC: 3 | RNVC: 2

26 Aug 1991

5340-15-204-7554
Block Clamp

152047554
109-0518-80-103: RNCC: 3 | RNVC: 2

22 Dec 2011

5340-15-064-7114
Handle Grip

150647114
01-245-E-146: RNCC: 3 | RNVC: 2

24 Jun 1984

5340-15-154-0953
Angle Bracket

151540953
0-151261: RNCC: 3 | RNVC: 2
(241)A39630-151261: RNCC: 5 | RNVC: 2
1PA39630-151261: RNCC: 5 | RNVC: 2

20 Mar 2001

5340-15-109-3852
Angle Bracket

151093852
5137-291-18: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-050-0483
Handle Grip

150500483
8031-54: RNCC: 3 | RNVC: 2
8031-54: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-005-0981
Retaining Strap

150050981
1137-15-155: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-058-6756
Rim Lock

150586756
1971-033: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-058-6426
Rod End Clevis

150586426
AB47-385-157-41: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-005-8308
Loop Clamp

150058308
NOR2-505-06-17A: RNCC: 3 | RNVC: 2

2 Jan 1979

5340-15-009-9024
Angle Bracket

150099024
1236-19-101: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-073-5264
Flush Lock

150735264
73-70X73: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-152-0941
Clip Retainer Plate

151520941
7364-17: RNCC: 3 | RNVC: 2
7364-17: RNCC: 5 | RNVC: 9

4 Aug 2000

5340-15-107-2518
Handle Grip

151072518
2544-000026: RNCC: 3 | RNVC: 2
2544-26: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-107-8800
Angle Bracket

151078800
60134380: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-108-5203
Retaining Strap

151085203
4253273514: RNCC: 3 | RNVC: 2
9986561: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-049-5292
Handle Grip

150495292
011-1901: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-157-4246
Access Cover

151574246
21505668: RNCC: 3 | RNVC: 2

14 Jul 2003

5340-15-113-1249
Butt Hinge Leaf

151131249
109-0711-80-105: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-15-056-5351
Expansion Plug

150565351
2300-23356: RNCC: 3 | RNVC: 2
230023356: RNCC: 5 | RNVC: 2

31 Dec 1975

5340-15-198-2797
Mounting Plate

151982797
GM775044: RNCC: 3 | RNVC: 2

14 Sep 2004

5340-15-003-6712
Bow Handle

150036712
129509: RNCC: 3 | RNVC: 2

23 Feb 1984

5340-15-110-4563
Retaining Strap

151104563
79013422: RNCC: 3 | RNVC: 2
79013422: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-150-3739
Screw Thread Insert

151503739
26T042P011: RNCC: 5 | RNVC: 2
26T042P011: RNCC: 5 | RNVC: 9

6 Oct 1999

5340-15-153-5198
Access Cover

151535198
142025142: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-001-5545
Access Cover

150015545
182719049: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-15-153-5162
Access Cover

151535162
142004918: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-187-4433
Mounting Plate

151874433
109-0343-75-113: RNCC: 3 | RNVC: 2

31 Mar 2009

5340-15-154-3792
Retaining Strap

151543792
J28040209-001: RNCC: 3 | RNVC: 2

14 May 2001

5340-15-111-3764
Handle Grip

151113764
224A6029-001: RNCC: 3 | RNVC: 2

7 Sep 1990

5340-15-197-8676
Angle Bracket

151978676
N773G2005201: RNCC: 3 | RNVC: 2

21 May 2004

5340-15-152-0005
Angle Bracket

151520005
60127730: RNCC: 3 | RNVC: 2

31 Jul 2000

5340-15-002-6168
Metal Grille

150026168
182-711: RNCC: 3 | RNVC: 2

9 Sep 2013

5340-15-002-8147
Mounting Plate

150028147
5801359999: RNCC: 3 | RNVC: 2

3 Oct 2013

5340-15-162-2404
Access Cover

151622404
124217: RNCC: 3 | RNVC: 2
D5240323: RNCC: 5 | RNVC: 2

17 May 2001

5340-15-207-8599
Mounting Plate

152078599
5801325250: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-118-9630
Angle Bracket

151189630
75206816: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-121-5630
Access Cover

151215630
1P 702001LA: RNCC: 3 | RNVC: 2
1P 702001LA: RNCC: 5 | RNVC: 9

12 Sep 1996

5340-15-102-0797
Butt Hinge Leaf

151020797
213A7198-001: RNCC: 3 | RNVC: 2

29 Jul 1988

5340-15-120-0890
Retaining Strap

151200890
320071198: RNCC: 3 | RNVC: 2
93190069: RNCC: 5 | RNVC: 2

19 Dec 1994

5340-15-119-5666
Retaining Strap

151195666
4843378: RNCC: 3 | RNVC: 2

19 Sep 1994

Load More Results