What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 49 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 49 of 72

5340-15-122-2891
Protege Disque

151222891
800072455: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-074-4364
Turnbuckle

150744364
1C76UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-136-3082
Asta

151363082
61687143: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-137-1293
Inserto

151371293
69260P05: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-194-4061
Lock-Release Lever

151944061
0.009.1749.0/10: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-15-205-1991
High Pre Protection

152051991
CBD71454P01: RNCC: 3 | RNVC: 2
(241)A3460CBD71454P01: RNCC: 5 | RNVC: 2

24 Feb 2012

5340-15-202-5627
Dust And Moisture Seal Protective Cap-Plug

152025627
080950.22: RNCC: 3 | RNVC: 2
98182847: RNCC: 4 | RNVC: 1
(241)A396398182847: RNCC: 5 | RNVC: 2

10 May 2007

5340-15-205-2509
Universal Adjustable Chock

152052509
504377578: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-181-2966
Double Angle Bracket

151812966
PAAE125722: RNCC: 3 | RNVC: 2

25 Nov 2008

5340-15-156-6569
Threaded End Tensioning Tie Rod

151566569
4239510: RNCC: 3 | RNVC: 2

3 Mar 2003

5340-15-193-3928
Piastra Di Montaggi

151933928
504304671: RNCC: 3 | RNVC: 2
(241)A4249504304671: RNCC: 5 | RNVC: 2

11 May 2010

5340-15-127-3882
Gancio Per Molla Co

151273882
850825: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-105-2085
Rubber Bumper

151052085
814155: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-189-2815
Inc_Inserito Dalla

151892815
D8405452: RNCC: 3 | RNVC: 2

10 Feb 2010

5340-15-203-5040
Corrosion Preventive Anode

152035040
FIT/ARMC76: RNCC: 3 | RNVC: 2

10 Feb 2008

5340-15-212-1883
Gangi Fissaggio

152121883
GANGI-FISSAGGIO: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-109-4331
Maniglia Complessiv

151094331
60124145: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-189-2814
Inc_Inserito Dalla

151892814
D8405146: RNCC: 3 | RNVC: 2

10 Feb 2010

5340-15-157-7102
Turnbuckle

151577102
TENDITORE 10MM ACCIAIO: RNCC: 3 | RNVC: 2

16 Oct 2003

5340-15-112-8384
Headless Grooved Rod

151128384
466826: RNCC: 3 | RNVC: 2
D0466826: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-002-1723
Angle Bracket

150021723
5801347398: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-179-2027
Rod

151792027
79102576: RNCC: 3 | RNVC: 2

18 Jul 2006

5340-15-141-2457
Padlock

151412457
161.30: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-148-3533
Double Angle Bracket

151483533
159019: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-001-2587
Headless Straight Rod

150012587
12900000920R: RNCC: 3 | RNVC: 2

11 Jun 2013

5340-15-201-4015
Frame Assembly

152014015
921-1150/01: RNCC: 3 | RNVC: 2
(241)A4582921-1150/01: RNCC: 5 | RNVC: 2

8 Aug 2006

5340-15-196-6303
Padlock

151966303
PN UAS 00049428: RNCC: 3 | RNVC: 2
5340F76040157: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-206-2675
Pad Eye

152062675
63.25.08.100.101: RNCC: 3 | RNVC: 2

1 Jun 2012

5340-15-137-7573
Tenditore Completo

151377573
32801440: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-127-4486
Anello

151274486
1740-16-006: RNCC: 3 | RNVC: 2
1740-16-006: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-112-8351
Puntale

151128351
470505: RNCC: 3 | RNVC: 2
D0470505: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-118-0470
Piastrino Di Colleg

151180470
D0487601: RNCC: 3 | RNVC: 2

18 Nov 1994

5340-15-189-9714
Filo Ferro Zincato

151899714
FILO FERRO ZINCATO NR 17: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-166-4851
Taschina Grezza

151664851
035419009: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-178-2188
Resilient Mount

151782188
P12020: RNCC: 3 | RNVC: 2

11 Mar 2005

5340-15-120-1423
Cerniera Speciale

151201423
311A7310-401: RNCC: 3 | RNVC: 2

16 Jan 1995

5340-15-066-4812
Maniglia Speciale

150664812
D0403/R04: RNCC: 3 | RNVC: 2

1 Mar 1986

5340-15-110-5313
Plug

151105313
071.174: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-153-6848
Copiaccesso

151536848
142065016: RNCC: 3 | RNVC: 2

20 Feb 2001

5340-15-119-8160
Carter De Protectio

151198160
79036971: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-215-8829
Guida In Lamiera

152158829
559014: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-074-4118
Turnbuckle

150744118
2C6UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-051-4105
Anello

150514105
4006235: RNCC: 3 | RNVC: 2
4006235: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-199-8470
Anchor Strap

151998470
9CS3703047: RNCC: 3 | RNVC: 2
(241)A91729CS3703047: RNCC: 5 | RNVC: 2

14 Jun 2005

5340-15-166-5173
Assieme Supporto

151665173
452861C: RNCC: 3 | RNVC: 2
452861C: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-157-4219
Piastra Scorrevole

151574219
21505697: RNCC: 3 | RNVC: 2

14 Jul 2003

5340-15-163-3679
Spacing Threaded Standoff

151633679
9261296: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-214-0405
Molla

152140405
240490871: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-055-5107
Gancetto

150555107
84011-5: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-115-5443
Tamburo Posteriore

151155443
D0469150: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-006-2147
Double Angle Bracket

150062147
23338-101: RNCC: 3 | RNVC: 2

9 Oct 1979

5340-15-103-2085
Blocchetto Connessi

151032085
L1557056: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-109-7094
Cinghiedibloccaggio

151097094
002908: RNCC: 3 | RNVC: 2

2 Dec 1989

5340-15-188-8042
Speciale Piastrina

151888042
552306115000: RNCC: 3 | RNVC: 2
(241)A1140552306115000: RNCC: 5 | RNVC: 2

19 Nov 2009

5340-15-112-7515
Switch Cover

151127515
27602750111: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-120-0744
Access Door

151200744
322104F91: RNCC: 3 | RNVC: 2

16 Dec 1994

5340-15-210-3759
Raccordo Per Fanale

152103759
2206500: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-001-8932
Pattino Di Metallo

150018932
8873/64/5015-19: RNCC: 3 | RNVC: 2

18 Jul 2013

5340-15-117-7307
Blocchetto Di Fermo

151177307
142513101: RNCC: 3 | RNVC: 2

13 Jan 1994

5340-15-103-1973
Speciale Supporto

151031973
DE013.13.461: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-074-4374
Turnbuckle

150744374
2C20UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-118-7435
Resilient Mount

151187435
9430985: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-119-9782
Threaded End Tensioning Tie Rod

151199782
78404F01: RNCC: 3 | RNVC: 2
78404F01: RNCC: 5 | RNVC: 9

28 May 1996

5340-15-199-5131
Staffa

151995131
122605447: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-15-169-5431
Lucchetto C.

151695431
F72013881: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-120-2984
Helical Compression Spring Seat

151202984
4817424: RNCC: 3 | RNVC: 2

13 Mar 1995

5340-15-179-6829
Rod

151796829
0000500413235: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-108-4765
Bracket

151084765
C7285-W5-B1: RNCC: 3 | RNVC: 2
C7285-W5-B1: RNCC: 5 | RNVC: 2
C7285-W5-B1: RNCC: 5 | RNVC: 9

19 Jul 1989

5340-15-179-4801
Subreflector Clamps

151794801
873-5860-099: RNCC: 3 | RNVC: 2

22 Jan 2007

5340-15-106-2241
Comando Asta

151062241
7765: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-119-7792
Runner

151197792
9460545: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-118-0460
Corpo Blocchetto Re

151180460
D0487871: RNCC: 3 | RNVC: 2

18 Nov 1994

5340-15-159-4718
Padlock Set

151594718
PN UAS 00000256: RNCC: 3 | RNVC: 2
9999F76008585: RNCC: 5 | RNVC: 9

31 Mar 2004

5340-15-003-3465
Manual Control Lever

150033465
182724333: RNCC: 3 | RNVC: 2
(241)A0199182724333: RNCC: 5 | RNVC: 2

4 Nov 2013

5340-15-188-9828
Flat Plate

151889828
129-0312-29-113: RNCC: 3 | RNVC: 2
(241)A0126129-0312-29-113: RNCC: 5 | RNVC: 2

12 Jan 2010

5340-15-108-1066
Ausgleichsgew

151081066
X667-15: RNCC: 3 | RNVC: 2
X667-15: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-193-0258
Piastra Di Montaggi

151930258
504041433: RNCC: 3 | RNVC: 2
(241)A4249504041433: RNCC: 5 | RNVC: 2

6 Apr 2010

5340-15-166-4826
Guida

151664826
20403085399: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-117-4069
Corpo Rubinetto Spe

151174069
D0466494: RNCC: 3 | RNVC: 2

6 Apr 1994

5340-15-213-8791
Catenaccio Vertical

152138791
CATENACCIO600MM: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-184-9590
Lucchetto Antiscass

151849590
115-50: RNCC: 3 | RNVC: 9

30 Dec 2008

5340-15-128-5310
Distanziale

151285310
02049: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-118-0343
Puntalino Segnalazi

151180343
D0467945: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-15-135-6528
Assieme Ritegno

151356528
205-062-659-101: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-068-4731
Resilient Mount

150684731
AA/20: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-045-4510
Semiccollare Maschi

150454510
787-12-52-01: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-110-3457
Anschlag

151103457
A81092-01-22: RNCC: 3 | RNVC: 2
A81092-01-22: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-118-0369
Puntalino In Ottone

151180369
D0472405: RNCC: 3 | RNVC: 2

18 Nov 1994

5340-15-189-8086
Barra Filettata

151898086
12X100: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-206-4045
Assortimento Elicoi

152064045
S437U09: RNCC: 3 | RNVC: 2
(241)AE343S437U09: RNCC: 5 | RNVC: 2

6 Jun 2012

5340-15-138-5616
Fermo Corsa

151385616
7689737: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-151-5921
Carrucola Di Rinvio

151515921
A0009721: RNCC: 3 | RNVC: 2

14 Jun 2000

5340-15-212-3202
Stop Con Viti Da 6M

152123202
VZ6MM: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-193-6503
Paracolpo Gomma

151936503
KP12.2010.2203: RNCC: 3 | RNVC: 2
163111205: RNCC: 3 | RNVC: 2
(241)A1579KP12.2010.2203: RNCC: 5 | RNVC: 2
163111205: RNCC: 5 | RNVC: 2

28 Jun 2010

5340-15-105-6298
Collare Serraggio

151056298
565968: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-126-4968
Molla

151264968
TGTA47: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-142-2375
Ammortizzatore

151422375
MM30AISI316: RNCC: 3 | RNVC: 2
(241)A3290MM30AISI316: RNCC: 5 | RNVC: 2

9 Jun 1997

5340-15-202-2806
Fascetta Fissaggio

152022806
41231085: RNCC: 3 | RNVC: 2
(241)A424941231085: RNCC: 5 | RNVC: 2

19 Feb 2007

5340-15-134-1986
Snap Hook

151341986
99=201=101: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-148-4770
Ruota Fissa

151484770
030175: RNCC: 3 | RNVC: 2

13 Aug 1998

5340-15-194-4384
Crown Working

151944384
21507615: RNCC: 3 | RNVC: 2

12 Nov 2010

5340-15-118-7214
Dust And Moisture Seal Protective Cap

151187214
79038439: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-147-8973
Manual Control Handle

151478973
322118F01: RNCC: 3 | RNVC: 2

18 May 1998

5340-15-162-3595
Pipe Covering Protection Saddle

151623595
D1418754: RNCC: 3 | RNVC: 2

16 Jul 2001

5340-15-163-4618
Dust And Moisture Seal Protective Cap

151634618
78209F01: RNCC: 3 | RNVC: 2

15 Sep 2003

5340-15-115-2282
Support

151152282
518031940: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-074-4215
Turnbuckle

150744215
1C16UNI2019A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-107-0016
Piede Elastico Rego

151070016
2640-70013: RNCC: 3 | RNVC: 2
2640-70013: RNCC: 5 | RNVC: 9

30 May 1989

5340-15-122-5574
Top Door

151225574
01TL21030-03: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-074-4415
Turnbuckle

150744415
1B6UNI2021A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-170-8583
Lastra Pre-Preg 211

151708583
58571-02/201: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-138-3606
Tirante Cofano

151383606
4259893: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-166-4831
Angolare

151664831
20403085389: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-113-2488
Staffacomplessivo

151132488
345A4275-402: RNCC: 3 | RNVC: 2

11 Apr 1991

5340-15-170-7785
Assembled Frame

151707785
342-4025/01.01: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-004-0439
Staffetta Speciale

150040439
120051: RNCC: 3 | RNVC: 2

6 Apr 1980

5340-15-209-0865
Lucchetto Mm.30

152090865
60030: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-001-8711
Tappo Con Sfiato

150018711
43ZPOVM12X1: RNCC: 3 | RNVC: 2

18 Jul 2013

5340-15-137-5545
Sigillo Per Reggett

151375545
NR19: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-188-5175
Spring Tension Clip

151885175
500318425: RNCC: 3 | RNVC: 2
Z04.04.03.08: RNCC: 5 | RNVC: 2
5340PL0956307: RNCC: 6 | RNVC: 9

29 Sep 2009

5340-15-193-7525
Dust And Moisture Seal Protective Plug

151937525
17.314.000: RNCC: 3 | RNVC: 2

8 Jul 2010

5340-15-200-8290
Galleggiante Cobo

152008290
29.050.000: RNCC: 3 | RNVC: 2
(241)A403229.050.000: RNCC: 5 | RNVC: 2

9 Mar 2006

5340-15-114-3861
Leva

151143861
CF307142: RNCC: 3 | RNVC: 2

9 Jun 1992

5340-15-138-2881
Lucchetto Mm.60

151382881
22010-60: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-136-1197
Staffa Anteriore Si

151361197
4451768: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-111-9247
Helical Compression Spring Seat

151119247
81710002: RNCC: 3 | RNVC: 2
8800933: RNCC: 5 | RNVC: 2

10 Sep 1989

5340-15-002-7102
Molla

150027102
1408: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-113-8605
Corrosion Preventive Anode

151138605
35420: RNCC: 3 | RNVC: 2

13 Oct 1994

5340-15-199-8466
Rod End Locking Retainer

151998466
9CS3703026: RNCC: 3 | RNVC: 2
(241)A91729CS3703026: RNCC: 5 | RNVC: 2

14 Jun 2005

5340-15-186-8617
Double Angle Bracket

151868617
1Q341061: RNCC: 3 | RNVC: 2
1Q341061: RNCC: 5 | RNVC: 2

5 Jan 2009

5340-15-074-4037
Turnbuckle

150744037
2A27UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-206-1164
Pattino Di Metallo

152061164
70807: RNCC: 3 | RNVC: 2
(241)A348870807: RNCC: 5 | RNVC: 2

22 May 2012

5340-15-118-2837
Cilindretto Portagu

151182837
D0484922: RNCC: 3 | RNVC: 2

20 Apr 1995

5340-15-222-2259
Distanziale Travi H

152222259
S1-143B: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-068-4091
Supporto Compl.

150684091
212-1115-18-1: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-115-6099
Coperchietto Scatol

151156099
D0471977: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-220-0662
Telaio Fon. Angolar

152200662
S1-143D: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-199-8847
Premimolla Inox

151998847
80925: RNCC: 3 | RNVC: 2
(241)A098480925: RNCC: 5 | RNVC: 2

26 Jun 2005

5340-15-210-3151
Piastra Inter 30

152103151
080316: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-153-6405
Speciale Cerniera

151536405
142010159: RNCC: 1 | RNVC: 3

20 Feb 2001

5340-15-204-2012
Clamp

152042012
42560685: RNCC: 3 | RNVC: 2

23 Sep 2011

5340-15-131-2301
Escutcheon Plate

151312301
140-20-280-11-00: RNCC: 3 | RNVC: 2
140-20-280-11-00: RNCC: 5 | RNVC: 9

9 Oct 1996

5340-15-155-4418
Dust Protective Cap

151554418
CBD71046P08: RNCC: 3 | RNVC: 2

25 Mar 2002

5340-15-220-6934
Strettoia Falegname

152206934
STRETTOIAFALEGNAME: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-057-5898
Key Blank

150575898
19T: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-115-8734
Lateral Pro

151158734
273300G4: RNCC: 3 | RNVC: 2
71-26-002-019: RNCC: 3 | RNVC: 2

1 Feb 1993

5340-15-006-1447
Striscia Di Fissagg

150061447
95316-107: RNCC: 3 | RNVC: 2

17 Sep 1979

5340-15-074-4031
Turnbuckle

150744031
2A8UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-116-8517
Cerniera Per Pompa

151168517
D0469488: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-15-109-5889
Supportodimontaggio

151095889
20530872A: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-218-2414
Confezione Linguett

152182414
DT3932: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-158-6444
Maniglia

151586444
162530145: RNCC: 3 | RNVC: 2

12 Mar 2004

5340-15-118-1123
Sadd Pipe Support

151181123
1Q 511269: RNCC: 3 | RNVC: 2
1Q 511269: RNCC: 5 | RNVC: 9

22 Mar 1996

5340-15-152-5045
Bracket

151525045
NN77789P01: RNCC: 3 | RNVC: 2

18 Sep 2000

5340-15-166-5185
Manetta Comando Man

151665185
TP500080201C2813: RNCC: 1 | RNVC: 2
TP500080201C2813: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-193-4393
Access Door Locking Ring

151934393
504122876: RNCC: 3 | RNVC: 2
(241)A4249504122876: RNCC: 5 | RNVC: 2

13 May 2010

5340-15-120-1307
End Stop

151201307
518-03-1470: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-15-200-3532
Corrosion Preventive Anode

152003532
S50022-00: RNCC: 3 | RNVC: 2

15 Dec 2005

5340-15-136-5954
Striscia

151365954
S6125-55006-12: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-189-5352
Fascetta

151895352
STSTG001-22-21: RNCC: 3 | RNVC: 2

26 Feb 2010

5340-15-112-8341
Ritegnom

151128341
466770: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-115-7066
Coperchio Superiore

151157066
D0470005: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-162-0174
Cover

151620174
E9797.0000: RNCC: 5 | RNVC: 2
E9797.0000: RNCC: 5 | RNVC: 9

15 Nov 2000

5340-15-151-7533
Cuffia

151517533
A2876200: RNCC: 3 | RNVC: 2

5 Jul 2000

5340-15-118-0383
Flangia Forma Speci

151180383
D0484532: RNCC: 3 | RNVC: 2

18 Nov 1994

5340-15-120-6037
Albero Molla Assiem

151206037
309-5948-00: RNCC: 3 | RNVC: 2

10 Jul 1995

5340-15-178-6203
Manual Control Lever

151786203
KT10: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-065-6878
Helical Compression Spring Seat

150656878
1Q 245248: RNCC: 3 | RNVC: 2
1Q 245248: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-166-4946
Packing

151664946
54110426A: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-181-4138
Tappo Di Sughero

151814138
TAPPOTY1GRACL1N0: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-142-5817
Bussola

151425817
4233161: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-134-6335
Graffetta

151346335
4272449: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-121-4090
Protection Bell Cra

151214090
D1-36014-003: RNCC: 3 | RNVC: 2
D1-36014-003: RNCC: 5 | RNVC: 9

12 Dec 1995

5340-15-158-3464
Electrical-Me Post

151583464
C67392: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-15-176-4463
Fischer Per Scaldab

151764463
FISCHERPERSCALDABAGNO: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-162-2668
Guide Oil Seal

151622668
30.03.78.00: RNCC: 3 | RNVC: 2

17 May 2001

5340-15-007-7850
Ammortizzatore

150077850
1350096: RNCC: 3 | RNVC: 2

10 May 1980

5340-15-119-9712
Double Angle Bracket

151199712
75665F01: RNCC: 3 | RNVC: 2
75665F01: RNCC: 3 | RNVC: 2
75665F01: RNCC: 5 | RNVC: 9

22 May 1996

5340-15-193-1595
Angle Bracket

151931595
504155061: RNCC: 3 | RNVC: 2
(241)A4249504155061: RNCC: 5 | RNVC: 2

20 Apr 2010

5340-15-199-7999
Portaboccola

151997999
D0475771: RNCC: 3 | RNVC: 2
(241)A0461D0475771: RNCC: 5 | RNVC: 2

7 Jun 2005

5340-15-053-5946
Nottolino

150535946
30-8116-11: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-122-1185
Spina Complessivo

151221185
129-0640-87-101: RNCC: 3 | RNVC: 2

14 May 1996

5340-15-127-4382
Molla Richiamo Cepp

151274382
1740-33-013: RNCC: 3 | RNVC: 2
1740-33-013: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-007-3319
Cover Plate Access

150073319
1276-23-664: RNCC: 3 | RNVC: 2

27 Oct 1979

5340-15-139-7816
Catenella Completa

151397816
1000568: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-147-5773
Fork

151475773
982150183: RNCC: 3 | RNVC: 2

30 Dec 1997

5340-15-136-2382
Staffa

151362382
5962859: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-115-7121
Flangia Tubo Misura

151157121
D0489285: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-15-115-7049
Coperchio

151157049
D0467415: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-074-4343
Turnbuckle

150744343
2B80UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-115-2828
Tie Rod

151152828
518041560: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-204-4974
Handle

152044974
42563862: RNCC: 3 | RNVC: 2
7119384: RNCC: 5 | RNVC: 2
CV181732A: RNCC: 5 | RNVC: 2

7 Nov 2011

5340-15-115-7168
Settore Dentato Cil

151157168
D1401043: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-15-114-2543
Supporto

151142543
8246.20.22: RNCC: 3 | RNVC: 2

12 May 1993

5340-15-179-4461
Key Blank

151794461
UL050: RNCC: 3 | RNVC: 2

28 Nov 2006

5340-15-153-7443
Multiple Angle Bracket

151537443
142063266: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-180-1709
Dust And Moisture Seal Protective Cover

151801709
187.05.028: RNCC: 3 | RNVC: 2

15 Feb 2008

5340-15-074-4056
Turnbuckle

150744056
1B16UNI2018ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-008-0806
Resilient Mount

150080806
60105032: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-207-1171
Angle Bracket

152071171
98197849: RNCC: 3 | RNVC: 2

5 Sep 2012

5340-15-188-4979
Manual Control Handle

151884979
500416684: RNCC: 3 | RNVC: 2

24 Sep 2009

5340-15-064-4007
Double Angle Bracket

150644007
60116066: RNCC: 3 | RNVC: 2

6 May 1983

5340-15-113-2884
Threaded End Tensioning Tie Rod

151132884
1Z 591179: RNCC: 3 | RNVC: 2
1Z 591179: RNCC: 5 | RNVC: 9

7 Jan 1994

5340-15-117-4063
Flangia Per Valvola

151174063
D0468046: RNCC: 3 | RNVC: 2

6 Apr 1994

5340-15-236-9691
Catenaccio Orizzont

152369691
44755-50: RNCC: 3 | RNVC: 2
534015E080334: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-149-6157
Lock Assy

151496157
518-38-1650: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-152-1092
Alloggiamento

151521092
60137517: RNCC: 3 | RNVC: 2

7 Aug 2000

5340-15-119-7395
Bush Suppor

151197395
01TL23247: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-166-4938
Gancio Orientabile

151664938
552081: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-119-7609
Rewo Cover

151197609
294226-G1: RNCC: 3 | RNVC: 2
294226-G1: RNCC: 5 | RNVC: 2
294226-G1: RNCC: 5 | RNVC: 9

17 Nov 1994

5340-15-158-6118
Control Rod

151586118
122607230: RNCC: 3 | RNVC: 2

10 Mar 2004

5340-15-166-4825
Guida

151664825
20403085398: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-121-7531
Sealing Plug Assembly

151217531
GI0001444: RNCC: 3 | RNVC: 2
740419: RNCC: 5 | RNVC: 2

14 Feb 1996

5340-15-180-8545
Nut And Bolt Retainer

151808545
J57150565-007: RNCC: 3 | RNVC: 2

29 Jul 2008

5340-15-064-6859
Hinge

150646859
P175567-003: RNCC: 3 | RNVC: 2

10 Jun 1984

5340-15-213-4436
Serratura Corbin 50

152134436
PS302045000: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-153-1015
Maniglia Incassata

151531015
E0050G005: RNCC: 3 | RNVC: 2

22 Nov 2000

5340-15-139-4231
Tirante

151394231
4666954: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-203-7199
Cap

152037199
58100343: RNCC: 3 | RNVC: 2

27 Jun 2011

5340-15-205-7034
Tampone Ammortizzat

152057034
HPI-0088/01: RNCC: 3 | RNVC: 2
(241)A0069HPI-0088/01: RNCC: 5 | RNVC: 2

28 Mar 2012

5340-15-002-7721
Housing End

150027721
4232180-00: RNCC: 3 | RNVC: 2

1 Oct 2013

5340-15-135-6244
Assieme Molla

151356244
412-5000-13-101: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-006-8975
Control Rod

150068975
39A510-12-77A: RNCC: 3 | RNVC: 2

2 Jan 1979

5340-15-161-2469
Corrosion Preventive Anode

151612469
59016324: RNCC: 3 | RNVC: 2
59016324: RNCC: 5 | RNVC: 2

11 Oct 2000

5340-15-118-9987
Dust And Moisture Seal Protective Plug

151189987
9817972: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-135-9475
Tassello Elasti

151359475
5968404: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-156-2068
Handwheel

151562068
(241)A3460CBD70761P03: RNCC: 3 | RNVC: 2
CBD70761P03: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-137-2733
Striscia

151372733
47-682-139-56: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-213-8662
Borchia In Nylon Pe

152138662
042-001: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-233-1429
Lucchetto Mm.50 "Co

152331429
SRLU4750: RNCC: 3 | RNVC: 2
534015E002398: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-204-3071
Fork

152043071
1127-16-595: RNCC: 3 | RNVC: 2
112716595: RNCC: 5 | RNVC: 2

20 Oct 2011

5340-15-156-2655
Volantino

151562655
07102801: RNCC: 3 | RNVC: 2
(241)A977207102801: RNCC: 5 | RNVC: 2

20 Dec 2002

5340-15-114-5098
Asta Magnetica Comp

151145098
Q531580035: RNCC: 3 | RNVC: 2

16 Jun 1992

5340-15-115-6979
Corpo Rubinetto

151156979
D0469935: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-115-6994
Gruppo Leva Di Mano

151156994
D0269407: RNCC: 3 | RNVC: 2

10 Mar 1994

5340-15-107-5727
Piastrina Completa

151075727
DE013.14.702: RNCC: 3 | RNVC: 2

5 Jan 1989

5340-15-120-0217
Volantino Bloccaggi

151200217
79033569: RNCC: 3 | RNVC: 2

5 Dec 1994

5340-15-074-4371
Turnbuckle

150744371
2C10UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-210-7009
Linguetta Arrotonda

152107009
UNI6604-10X8X32: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-119-7132
Runner

151197132
UZ00379021: RNCC: 3 | RNVC: 2

7 Nov 1994

5340-15-153-2771
Rubber Bumper

151532771
132503208: RNCC: 2 | RNVC: 3

12 Dec 2000

5340-15-115-2127
Verrou

151152127
70669589: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-114-3276
Cerniera Destra

151143276
CF327116: RNCC: 3 | RNVC: 2

4 Jun 1992

5340-15-139-7873
Collare Serraggio

151397873
1000938: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-166-5156
Fascetta In Cfz. Da

151665156
233402: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-122-3349
Terminale Tappo

151223349
200A0007-001: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-214-3863
Clamp

152143863
82680-17: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-001-5486
Stand Base

150015486
182719583: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-15-201-0919
Staffa

152010919
20510064A: RNCC: 3 | RNVC: 2

22 May 2006

5340-15-196-8411
Catena Con Lucchett

151968411
PN UAS 00001357: RNCC: 3 | RNVC: 2
5340F76025767: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-193-7130
Quick Link

151937130
SSQL04: RNCC: 3 | RNVC: 2

2 Jul 2010

5340-15-139-3189
Tirante

151393189
1369757: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-199-6336
Prolunga Attacco

151996336
219AS0044-101: RNCC: 3 | RNVC: 2
(241)A0126219AS0044-101: RNCC: 5 | RNVC: 2

12 May 2005

5340-15-174-7311
Bellow Azimuth

151747311
825-4012-323: RNCC: 3 | RNVC: 2
M0016934: RNCC: 5 | RNVC: 2

2 Oct 2003

5340-15-074-4370
Turnbuckle

150744370
2C8UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-132-7687
Mezza Cerniera Este

151327687
03925-101: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-180-3642
Stand Base

151803642
2586110: RNCC: 3 | RNVC: 2
2586110: RNCC: 5 | RNVC: 2

29 Apr 2008

5340-15-122-3564
Control Rod

151223564
D1402324: RNCC: 3 | RNVC: 2

8 Jun 2000

5340-15-153-5018
Half Hinge

151535018
J57140703-001: RNCC: 3 | RNVC: 2

5 Feb 2001

5340-15-116-2959
Shock Mount Pad

151162959
190515227: RNCC: 3 | RNVC: 2
741092-70: RNCC: 3 | RNVC: 2

19 Apr 1993

5340-15-177-3824
Manual Control Handle

151773824
032593: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-157-4141
Dashpot

151574141
000451: RNCC: 3 | RNVC: 2
(241)A3593000451: RNCC: 5 | RNVC: 2

11 Jul 2003

5340-15-213-8660
Tassello Ancoran.10

152138660
79000D10050: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-074-4161
Turnbuckle

150744161
2D8UNI20180T60-2012AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-206-0114

5340-15-186-6075
Staffaggio Rapido

151866075
IROX B35/14: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-001-0670
Dust And Moisture Seal Protective Cap-Plug

150010670
4082T19P02: RNCC: 3 | RNVC: 2

24 May 2013

5340-15-001-0295
Double Angle Bracket

150010295
504378396: RNCC: 3 | RNVC: 2

15 May 2013

5340-15-007-5222
Cover Plate Access

150075222
1239-01-018: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-125-6239
Lucchetto Yale

151256239
LUCCHETTOYALE: RNCC: 3 | RNVC: 2
LUCCHETTOYALE: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-007-8106
Headless Grooved Rod

150078106
4606198: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-198-8188
Comples Protezione

151988188
142052846: RNCC: 3 | RNVC: 2

18 Nov 2004

5340-15-006-7125
Adapter

150067125
30063-405: RNCC: 3 | RNVC: 2

9 Jan 1980

5340-15-006-5982
Resilient Mount

150065982
02-26534: RNCC: 3 | RNVC: 2
4380647: RNCC: 5 | RNVC: 2
4380647: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-166-4786
Ruota In Ghisa Rive

151664786
31211: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-187-5348
Screw Thread Insert

151875348
61580-25/022: RNCC: 3 | RNVC: 2

9 Apr 2009

5340-15-130-0201
Cavallotto

151300201
257409: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-121-3069
Dust And Moisture Seal Protective Cap-Plug

151213069
M9472500170: RNCC: 3 | RNVC: 2

7 Nov 1995

5340-15-115-2346
Bushing

151152346
518021570: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-055-6604
Staffetta Anteriore

150556604
546208: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-200-4897
Anello Gomma

152004897
N967G7128201: RNCC: 3 | RNVC: 2
(241)A0126N967G7128201: RNCC: 5 | RNVC: 2

25 Jan 2006

5340-15-068-2170
Double Angle Bracket

150682170
62982-101: RNCC: 3 | RNVC: 2

17 Apr 1986

5340-15-105-6336
Collare Serraggio

151056336
10418701: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-195-4515
Paracolpo Gomma

151954515
142017789: RNCC: 3 | RNVC: 2
12.2055.2803.781.086: RNCC: 3 | RNVC: 2
(241)A157912.2055.2803.781.086: RNCC: 5 | RNVC: 2

28 Mar 2011

5340-15-156-2016
Base

151562016
(241)A3460CBD71174P01: RNCC: 3 | RNVC: 2
CBD71174P01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-120-5694
Spring Tension Clip

151205694
10173: RNCC: 3 | RNVC: 2
22981263: RNCC: 5 | RNVC: 2

28 Jun 1995

5340-15-108-8933
Control Rod

151088933
60124150: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-117-5372
Boccola Speciale

151175372
FFAA0502-0194: RNCC: 3 | RNVC: 2

12 Nov 1993

5340-15-105-6038
Staffa A Gomito

151056038
2640-71005: RNCC: 3 | RNVC: 2
2640-71005: RNCC: 5 | RNVC: 9

30 May 1989

5340-15-074-4288
Turnbuckle

150744288
2A27UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-204-3319
Telaio

152043319
0000500428407: RNCC: 3 | RNVC: 2
(241)A39630000500428407: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-155-2410
Hinge Assy

151552410
J52850200-404: RNCC: 3 | RNVC: 2

13 Feb 2002

5340-15-112-2670
Helical Compression Spring Seat

151122670
773148: RNCC: 3 | RNVC: 2

30 Apr 1988

5340-15-162-3359
Lock End

151623359
291A07550-101: RNCC: 3 | RNVC: 2

27 Jun 2001

5340-15-112-8511
Supporto

151128511
471819: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-149-1140
Double Angle Bracket

151491140
60184346: RNCC: 3 | RNVC: 2

2 Dec 1998

5340-15-157-4206
Nut And Bolt Retainer

151574206
21505734: RNCC: 3 | RNVC: 2

14 Jul 2003

5340-15-153-7148
Line Supporting Strap

151537148
142024026: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-188-1751
Coat And Hat Hook

151881751
200800007.24500: RNCC: 3 | RNVC: 2
(241)A6114200800007.24500: RNCC: 5 | RNVC: 2

27 Jul 2009

5340-15-157-1763
Support Frame

151571763
CBD71314P01: RNCC: 3 | RNVC: 2
(241)A3460CBD71314P01: RNCC: 3 | RNVC: 2

13 May 2003

5340-15-219-9516
Cremonese In Ottone

152199516
CREMONESE BRONZATO: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-219-6395
Serie Lucchetti Vir

152196395
80 PZ: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-207-0146
Bracket

152070146
4186T79G01: RNCC: 3 | RNVC: 2
(241)A34604186T79G01: RNCC: 5 | RNVC: 2

8 Aug 2012

5340-15-127-5560
Molla Richiamo Farf

151275560
887303: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-122-7710
Pilota Da 10 Mt

151227710
1310: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-206-7897
Damper

152067897
723009013500: RNCC: 3 | RNVC: 2
(241)A1140723009013500: RNCC: 5 | RNVC: 2

23 Jul 2012

5340-15-051-3697
Anello

150513697
898395: RNCC: 3 | RNVC: 2
898395: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-117-4034
Telaio Per Rele Log

151174034
D1405547: RNCC: 3 | RNVC: 2

31 Mar 1994

5340-15-179-8913
Dust And Moisture Seal Protective Cap

151798913
47159712: RNCC: 3 | RNVC: 2
47159712: RNCC: 5 | RNVC: 2

28 Sep 2007

5340-15-000-7230
Extension Drawer Slide

150007230
BRP-0337020: RNCC: 3 | RNVC: 2

3 Apr 2013

5340-15-138-4898
Tassello

151384898
5985912: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-213-8896
Cremonese Nova Con

152138896
GS1009: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-141-9414
Anodo

151419414
920020-26: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-114-7454
Panel Top

151147454
AS301-992: RNCC: 3 | RNVC: 2
AS301-992: RNCC: 5 | RNVC: 2
AS301-992: RNCC: 5 | RNVC: 9

4 Aug 1992

5340-15-147-3087
Handle

151473087
0061-04: RNCC: 3 | RNVC: 2

31 Oct 1997

5340-15-169-5722
Lucchetto Sg

151695722
F72015308: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-141-2456
Lucchetto Mm.40

151412456
L010.40.00: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-117-0018
Protection Sur Filt

151170018
79042093: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-154-3050
Tappo Ad Espansione

151543050
D0180024A: RNCC: 3 | RNVC: 2
D0180024A: RNCC: 5 | RNVC: 9

20 Apr 2001

5340-15-103-8537
Staffa

151038537
8582094: RNCC: 3 | RNVC: 2
(7001)5340151038537: RNCC: 5 | RNVC: 2

30 Mar 1988

5340-15-156-2053
Flange

151562053
(241)A3460CBD71195P01: RNCC: 3 | RNVC: 2
CBD71195P01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-122-1943
Access Door

151221943
99991049: RNCC: 3 | RNVC: 2
99991049: RNCC: 5 | RNVC: 9

14 Jun 1996

5340-15-203-4500
Hatch Actua Adapter

152034500
N523G5462201: RNCC: 3 | RNVC: 2
(241)A0126N523G5462201: RNCC: 5 | RNVC: 2

3 Feb 2008

5340-15-112-0436
Piastrina Speciale

151120436
275A0202-405: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-149-4554
Fascetta

151494554
1084.008: RNCC: 3 | RNVC: 2

10 Mar 1999

5340-15-177-5155
Reinforcement Plate

151775155
340-5035/01: RNCC: 3 | RNVC: 2

17 Apr 2004

5340-15-103-0246
Distanziatore

151030246
79035961: RNCC: 3 | RNVC: 2

21 Jun 1987

5340-15-074-4125
Turnbuckle

150744125
2C27UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-209-8952
Lucchetto Gr 30

152098952
ABCGR30: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-166-4939
Gancio Curvo Mm 30

151664939
554181: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-185-0924
Collare Tubo Pvc 20

151850924
CF20G: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-178-2320
Triplan

151782320
864.R03: RNCC: 3 | RNVC: 2

11 Mar 2005

5340-15-186-9629
Turnbuckle

151869629
504039471: RNCC: 3 | RNVC: 2
(241)A4249504039471: RNCC: 5 | RNVC: 2

12 Jan 2009

5340-15-002-5977
Angle Bracket

150025977
504382030: RNCC: 3 | RNVC: 2

4 Sep 2013

5340-15-111-9245
Helical Compression Spring Seat

151119245
42485256: RNCC: 3 | RNVC: 2

10 Sep 1989

5340-15-187-2285
Assieme Portello Pe

151872285
A4285: RNCC: 3 | RNVC: 2
(241)A7904A4285: RNCC: 5 | RNVC: 2

26 Feb 2009

5340-15-118-0349
Coperchio Posterior

151180349
D0467950: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-15-236-9681
Bocchetta Con Incav

152369681
36040-36: RNCC: 3 | RNVC: 2
534015E078585: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-180-8314

5340-15-153-7349
Testa Di Tirante Fi

151537349
142057171: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-118-0359
Coperchietto Per Co

151180359
D0472404: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-15-219-8293
Scatola Anelli Per

152198293
520CS: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-126-0739
Escutcheon Plate

151260739
7554717: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-106-9683
Pomello Bloccaggio

151069683
27-159-71: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-197-6792
Protezione

151976792
530530: RNCC: 3 | RNVC: 2

20 Apr 2004

5340-15-108-6208
Control Rod

151086208
93919316: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-191-0209
Rodconnecting Handb

151910209
481839: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-139-5214
Fermo

151395214
844126: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-001-8820
Disco

150018820
19710324: RNCC: 3 | RNVC: 2

18 Jul 2013

5340-15-155-0913
Nut And Bo Retainer

151550913
J57150409-001: RNCC: 3 | RNVC: 2

17 Jan 2002

5340-15-180-2025
Safety Plate

151802025
76013696: RNCC: 3 | RNVC: 2

15 Feb 2008

5340-15-122-2774
Kit Axe Plaquettes

151222774
800052697: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-114-7677
Bushing Ins

151147677
X446C25: RNCC: 3 | RNVC: 2

4 Aug 1992

5340-15-166-5069
Housing

151665069
31604001: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-118-6620
Anello

151186620
75208064: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-118-1175
Threaded End Tensioning Tie Rod

151181175
1P 576741: RNCC: 3 | RNVC: 2
1P 576741: RNCC: 5 | RNVC: 9

30 Jan 1995

5340-15-110-1364
Antivibrante

151101364
105.3328: RNCC: 3 | RNVC: 2

29 Jul 1990

5340-15-066-2103
Post

150662103
A15816: RNCC: 3 | RNVC: 2
A15816: RNCC: 5 | RNVC: 9

10 Feb 1986

5340-15-201-0414
Coperchio Di Protez

152010414
N632U6013201: RNCC: 3 | RNVC: 2
(241)A0126N632U6013201: RNCC: 5 | RNVC: 2

15 May 2006

5340-15-111-8346
Piastradiraccordo

151118346
RI408515: RNCC: 3 | RNVC: 2

1 Jul 1990

5340-15-204-6582
Corrosion Preventive Anode

152046582
410-027-033: RNCC: 3 | RNVC: 2
(241)A1823410-027-033: RNCC: 5 | RNVC: 2

5 Dec 2011

5340-15-185-2399
Supporto Antivibran

151852399
TD-140: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-109-9682
Access Door

151099682
109-0640-10-125: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-15-110-9009
Assiemecernierasupe

151109009
369H2416-1001: RNCC: 3 | RNVC: 2

4 May 1990

5340-15-074-4167
Turnbuckle

150744167
1A16UNI2019A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-100-5173
Resilient Mount

151005173
786021: RNCC: 3 | RNVC: 2

24 Mar 1987

5340-15-197-6793
Protezione

151976793
530540: RNCC: 3 | RNVC: 2

20 Apr 2004

5340-15-199-5198
Occhiello

151995198
122516225: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-15-121-5762
Engine Accessory Bracket

151215762
1R 516933: RNCC: 3 | RNVC: 2
1R 516933: RNCC: 5 | RNVC: 9

18 Sep 1996

5340-15-180-4299
Protection Assembly

151804299
212-1135-55-105: RNCC: 3 | RNVC: 2
(241)A0126212-1135-55-105: RNCC: 5 | RNVC: 2

20 May 2008

5340-15-115-5434
Protezione Microswi

151155434
D0472487: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-107-1720
Hinge

151071720
RS412164A: RNCC: 3 | RNVC: 2

24 May 1989

5340-15-166-4927
Fermo

151664927
7660562: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-127-3599
Molla

151273599
745215: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-003-2705
Corrosion Preventive Anode

150032705
80200500: RNCC: 3 | RNVC: 2

31 Oct 2013

5340-15-166-5048
Rod And Ass

151665048
232A3022403: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-213-8078
Serratura Agb

152138078
B008637005: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-065-3763
Luggage Bumper

150653763
4473656: RNCC: 3 | RNVC: 2
4473656: RNCC: 5 | RNVC: 9

24 Oct 1983

5340-15-219-7426
Anelli Per Targhett

152197426
ANELLI-100 PEZZI: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-112-9187
Double Angle Bracket

151129187
76185: RNCC: 3 | RNVC: 2

15 Jan 1996

5340-15-181-6618
Stampi Serie Numeri

151816618
MM.50: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-005-1278
Bracket

150051278
FGFB583821421D2: RNCC: 3 | RNVC: 2

9 Dec 2013

5340-15-188-4098
Winch Optic Bo

151884098
P651100: RNCC: 3 | RNVC: 2

4 Sep 2009

5340-15-237-9685
Torretta Junior

152379685
CP 50 JTW: RNCC: 3 | RNVC: 2
534015E141122: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-115-6107
Tubo Flangia Sfiato

151156107
D0471915: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-106-5404
Staffa Fissaggio

151065404
4734693: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-105-4198
Cappello Parapolver

151054198
MS 25043-10C: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-108-2926
Staffa

151082926
42035110: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-115-2302

5340-15-123-5693
Tappo Per Giunto Ra

151235693
99A962P001: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-117-7148
Sadd Pipe Support

151177148
1Q 519405: RNCC: 3 | RNVC: 2
1Q 519405: RNCC: 5 | RNVC: 9

17 Jan 1995

5340-15-159-9742
Rubber Bumper

151599742
122607460: RNCC: 3 | RNVC: 2

19 Apr 2004

5340-15-060-2306
Support

150602306
4133-45: RNCC: 3 | RNVC: 2

7 Dec 1976

5340-15-063-5642
Maniglia Complessiv

150635642
V434 TYPE 3: RNCC: 3 | RNVC: 2

31 Mar 1983

5340-15-181-7806
Cilindro Da Infilar

151817806
830030407: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-065-6885
Helical Compression Spring Seat

150656885
1P 234505: RNCC: 3 | RNVC: 2
1P 234505: RNCC: 5 | RNVC: 9

1 Jul 1989

5340-15-060-6757
Rubber Bumper

150606757
776974F: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-115-4717
Clamp

151154717
156 079 023: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-151-4741
Fermo Posteriore

151514741
UOHL0090100: RNCC: 3 | RNVC: 2

29 May 2000

5340-15-052-0119
Attacco Ogiva Compl

150520119
B910-20-72: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-112-8266
Occhio

151128266
466716: RNCC: 3 | RNVC: 2
D0466716: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-193-6874
Rear Plug

151936874
E10KA010A: RNCC: 3 | RNVC: 2

30 Jun 2010

5340-15-053-7298
Mensola Filtro Comb

150537298
739024: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-112-0412
Dispositivo Di Supp

151120412
275A2854-401: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-045-2992
Control Rod

150452992
500-12-01-02: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-162-0943
Eye End

151620943
292A02040-103: RNCC: 3 | RNVC: 2

29 Jan 2001

5340-15-127-2598
Molla

151272598
1315-34-004: RNCC: 3 | RNVC: 2
1315-34-004: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-110-3736
Handgriff

151103736
A81021-49-22: RNCC: 3 | RNVC: 2
A81021-49-22: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-117-9162
Flangia Assieme

151179162
232A1520-401: RNCC: 3 | RNVC: 2

31 Jan 1994

5340-15-156-7488
Disco A Sezione Pie

151567488
0-121803: RNCC: 3 | RNVC: 2
1PA39630-121803: RNCC: 5 | RNVC: 2

6 Mar 2003

5340-15-005-1045
Cover Plate Access

150051045
1127-19-197: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-151-0658
Maniglia Di Solleva

151510658
120002704: RNCC: 3 | RNVC: 2

7 Mar 2000

5340-15-215-4260
Tirante A Due Bracc

152154260
ART100DIAM8: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-101-7894
Resilient Mount

151017894
10029-000: RNCC: 3 | RNVC: 2

9 Jul 1987

5340-15-186-8076
Rear Module

151868076
A8401203503: RNCC: 3 | RNVC: 2

5 Jan 2009

5340-15-105-6345
Collare Serraggio

151056345
38809730: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-204-9590
Riduzione

152049590
647000000224: RNCC: 3 | RNVC: 2
(241)AK137647000000224: RNCC: 5 | RNVC: 2

2 Feb 2012

5340-15-205-2507
Universal Adjustable Chock

152052507
504377606: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-162-9774
Bracket

151629774
60134626: RNCC: 3 | RNVC: 2

9 Apr 2002

5340-15-107-5733
Cuffia Antineve

151075733
DE160.01.095: RNCC: 3 | RNVC: 2
(241)A5015DE160.01.095: RNCC: 5 | RNVC: 2

5 Jan 1989

5340-15-157-2210
Headless Straight Rod

151572210
41042334: RNCC: 3 | RNVC: 2
(241)A424941042334: RNCC: 5 | RNVC: 2

27 May 2003

5340-15-105-6316
Collare Serraggio

151056316
10168501: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-152-4734
Bracket

151524734
NN78523P01: RNCC: 3 | RNVC: 2

18 Sep 2000

5340-15-153-5203
Dust And Moisture Seal Protective Plug

151535203
142041131: RNCC: 3 | RNVC: 2
(7001)5340151535203: RNCC: 5 | RNVC: 2

7 Feb 2001

5340-15-196-6312
Padlock

151966312
PN UAS 00033166: RNCC: 3 | RNVC: 2
5340F76029790: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-103-1994
Speciale Snodo

151031994
SILKAC 8M: RNCC: 3 | RNVC: 2
030.54.004: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-110-5284
Clip

151105284
380.702: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-156-3923
Plugging Plate

151563923
(241)A3460CBD71336P01: RNCC: 3 | RNVC: 2
CBD71336P01: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-105-4205
Cappuccio Parapolve

151054205
766075: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-062-5925
Seat Helical Compre

150625925
3619: RNCC: 3 | RNVC: 2
3619: RNCC: 3 | RNVC: 2

10 Apr 1982

5340-15-068-1947
Gruppo Staffaggio

150681947
644630: RNCC: 3 | RNVC: 2
644630: RNCC: 5 | RNVC: 9

27 Feb 1986

5340-15-202-4406
Dust And Moisture Seal Protective Plug

152024406
V4200184: RNCC: 3 | RNVC: 2
(241)A4447V4200184: RNCC: 5 | RNVC: 2

25 Mar 2007

5340-15-220-1349
Lucchetto Corazzato

152201349
15182: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-115-2317
Upper Pin

151152317
518022940: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-074-4172
Turnbuckle

150744172
1A6UNI20190T60-2012A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-127-4545
Ritegno Manig Molla

151274545
851918: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-117-0039
Extremite Commande

151170039
79043516: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-009-5826
Helical Compression Spring Seat

150095826
75237911: RNCC: 3 | RNVC: 2
9000457: RNCC: 5 | RNVC: 2
75237911: RNCC: 5 | RNVC: 9

14 Jun 1979

5340-15-216-6322
Serratura Codificat

152166322
EXRI7011493: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-204-3459
Corrosion Preventive Anode

152043459
25010002: RNCC: 3 | RNVC: 2
(241)ACA6425010002: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-198-4178
Shackle

151984178
122606502: RNCC: 3 | RNVC: 2

27 Sep 2004

5340-15-198-4306
Access Door

151984306
122605011: RNCC: 3 | RNVC: 2

27 Sep 2004

5340-15-197-7469
Antivibrante

151977469
27924: RNCC: 3 | RNVC: 2

26 Apr 2004

5340-15-149-2897
Multiple Angle Bracket

151492897
4861899: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-136-3324
Snodo Sferico

151363324
33B031P010: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-169-3590
Padlock

151693590
F72011000: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-115-6105
Percors Strozzatura

151156105
D0469249: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-120-0835
Dust And Moisture Seal Protective Cap-Plug

151200835
U1401: RNCC: 3 | RNVC: 2

16 Oct 1995

5340-15-134-6081
Cerniera Inferiore

151346081
4424784: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-162-0696
Breech Ring

151620696
137602131: RNCC: 3 | RNVC: 2

28 Dec 2000

5340-15-137-5526
Fascetta Stringicav

151375526
601-079: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-217-1661
Serratura Per Vetri

152171661
SERRATURAPERVETRINA: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-112-8122
Fond

151128122
468640: RNCC: 3 | RNVC: 2
D0468640: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-112-8221
Bussola

151128221
466373: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-149-2549
Cerniera Sportello

151492549
311A5516-751: RNCC: 3 | RNVC: 2

12 Jan 1999

5340-15-213-8080
Maniglia Cisa

152138080
07077180: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-121-5664
Engine Accessory Bracket

151215664
1R 554179: RNCC: 3 | RNVC: 2
1R 554179: RNCC: 5 | RNVC: 9

13 Sep 1996

5340-15-237-3456
Chiavistello

152373456
CTCS 10: RNCC: 3 | RNVC: 2
534015E054743: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-068-2301
Anchor Strap

150682301
W011589: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-074-4254
Turnbuckle

150744254
2D27UNI2019AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-064-5214
Frame

150645214
6-209-026: RNCC: 3 | RNVC: 2

30 Jul 1984

5340-15-121-5944
Supporto Ad Angolo

151215944
109-0858-55-103: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-120-6969
Cannotto Con Scanal

151206969
D1406558: RNCC: 3 | RNVC: 2

4 Jul 1996

5340-15-101-2679
Dispositivo Di Acco

151012679
523525-80: RNCC: 3 | RNVC: 2

23 Jan 1986

5340-15-178-7319
Manual Control Handle

151787319
IEL.65N-12-H: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-120-8665
Pannello Di Chiusur

151208665
109-0321-37-103: RNCC: 3 | RNVC: 2

4 Sep 1995

5340-15-159-4734
Padlock

151594734
PN UAS 00001539: RNCC: 3 | RNVC: 2
5340F76012739: RNCC: 5 | RNVC: 9

31 Mar 2004

5340-15-112-7595
Conn.Rod Bolt

151127595
91770083: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-220-8671
Fascetta Stringitub

152208671
530242: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-120-4751
Resilient Mount

151204751
1Z 592694: RNCC: 3 | RNVC: 2
1Z 592694: RNCC: 5 | RNVC: 9

5 Nov 1996

5340-15-170-9101
Manual Control Handle

151709101
71419172: RNCC: 3 | RNVC: 2
(241)AD75171419172: RNCC: 5 | RNVC: 2
71419172: RNCC: 5 | RNVC: 2

16 Jun 2003

5340-15-116-9730
Harness

151169730
W005142: RNCC: 3 | RNVC: 2
(7001)5340151169730: RNCC: 5 | RNVC: 2

18 Nov 1997

5340-15-193-9615
Butt-Strap

151939615
S61-0920-13-146: RNCC: 3 | RNVC: 2
(241)A0126S61-0920-13-146: RNCC: 5 | RNVC: 2

4 Aug 2010

5340-15-188-5544
Special Support

151885544
300A052001-108: RNCC: 3 | RNVC: 2
(241)A3397300A052001-108: RNCC: 5 | RNVC: 2

7 Oct 2009

5340-15-003-9172
Stand Base

150039172
182703120: RNCC: 3 | RNVC: 2
(241)A0199182703120: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-156-2021
Locking Base Assy

151562021
(241)A3460CBD71173G01: RNCC: 3 | RNVC: 2
CBD71173G01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-157-6271
Resilient Mount

151576271
05500003: RNCC: 3 | RNVC: 2
(241)A977205500003: RNCC: 5 | RNVC: 2

9 Oct 2003

5340-15-166-4855
Serratura Cisa

151664855
0822002: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-191-8423
Staffa Montaggio

151918423
ZFMQ00WMB: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-119-7365
As Adapter

151197365
01TL23360: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-213-8685
Catenacciolo Ottona

152138685
CATENACCIOLOMM80: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-117-3988
Resilient Mount

151173988
D1405557: RNCC: 3 | RNVC: 2

31 Mar 1994

5340-15-136-0926
Staffa

151360926
5937311: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-068-2331
Anchor Strap

150682331
W011566: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-155-2960
Supporto Completo

151552960
60180191: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-15-066-6377
Electrical-Me Post

150666377
63957: RNCC: 2 | RNVC: 2
63957F01: RNCC: 5 | RNVC: 2

17 Feb 1993

5340-15-200-1572
Shock Mount Pad

152001572
050312: RNCC: 3 | RNVC: 2
(241)A3593050312: RNCC: 5 | RNVC: 2

11 Oct 2005

5340-15-074-4261
Turnbuckle

150744261
1A10UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-103-4415
Plug

151034415
11 04 02 003: RNCC: 3 | RNVC: 2
0823996: RNCC: 5 | RNVC: 2

30 May 1989

5340-15-007-1799
Resilient Mount

150071799
1373020: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-005-1589
Control Rod

150051589
4212643: RNCC: 3 | RNVC: 2
4212643: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-119-5432
Flangia Speciale

151195432
D0468042: RNCC: 3 | RNVC: 2

24 Mar 1995

5340-15-068-1850
Anello

150681850
476399: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-15-103-0988
Electrical-Me Post

151030988
013.00.664: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-232-1365
Snap Hook

152321365
708.12.A1: RNCC: 3 | RNVC: 2
846515E154582: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-178-7667
Manual Control Lever

151787667
028026: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-177-9996
Piastra Di Chiusura

151779996
9AA8660H034-002: RNCC: 3 | RNVC: 2

25 Aug 2004

5340-15-105-8191
Sostegno Elastico

151058191
503-03-2535: RNCC: 5 | RNVC: 2
503-03-2535: RNCC: 5 | RNVC: 9

30 May 1989

5340-15-152-4106
Rod Actuatio Detail

151524106
J52850451-001: RNCC: 3 | RNVC: 2

7 Sep 2000

5340-15-218-4613
Sonda Tirafili Ml10

152184613
TID0310: RNCC: 5 | RNVC: 3

16 Nov 2005

Load More Results