What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 48 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 48 of 72

5340-15-186-9119
Antipilferage Seal

151869119
627101: RNCC: 3 | RNVC: 2
627101: RNCC: 5 | RNVC: 9

5 Jan 2009

5340-15-212-1041
Tappo

152121041
718617614: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-057-3845
Headless Grooved Rod

150573845
771057A: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-064-7668
Double Angle Bracket

150647668
23.74.14.00: RNCC: 3 | RNVC: 2

16 Dec 1983

5340-15-066-1246
Hook

150661246
01TC20446: RNCC: 3 | RNVC: 2

10 Feb 1986

5340-15-214-6040
Serratura

152146040
SERRATURA: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-199-8878
Premimolla Inox

151998878
60925: RNCC: 3 | RNVC: 2
(241)A098460925: RNCC: 5 | RNVC: 2

26 Jun 2005

5340-15-109-6221
Access Door

151096221
002902: RNCC: 3 | RNVC: 2

2 Dec 1989

5340-15-074-4124
Turnbuckle

150744124
2C22UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-120-9292
Semicerniera

151209292
113A6031-752: RNCC: 3 | RNVC: 2

5 Sep 1995

5340-15-152-0490
Staffa

151520490
0-168530: RNCC: 3 | RNVC: 2

2 Aug 2000

5340-15-232-9580
Tassello Con Vite

152329580
SLM 8 C/VITE: RNCC: 3 | RNVC: 2
534015E078059: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-112-8453
Headless Grooved Rod

151128453
467372: RNCC: 3 | RNVC: 2
D0467372: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-206-3570
Spacing Threaded Standoff

152063570
500405507: RNCC: 3 | RNVC: 2

4 Jun 2012

5340-15-188-9182
Strozzatore

151889182
D0470491: RNCC: 3 | RNVC: 2
(241)A0461D0470491: RNCC: 5 | RNVC: 2

16 Dec 2009

5340-15-112-0427
Piastrina Speciale

151120427
275A0602-407: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-106-0656
Scodellino Molla

151060656
4023904: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-112-0572
Dispositivo Di Serr

151120572
008A3033-401: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-205-6935
Staffa Di Fissaggio

152056935
AMOMO6144: RNCC: 3 | RNVC: 2
(241)AG592AMOMO6144: RNCC: 5 | RNVC: 2

27 Mar 2012

5340-15-148-6381
Butt Hinge (1)

151486381
190509057: RNCC: 3 | RNVC: 2

17 Sep 1998

5340-15-063-4778
Cover Plate Access

150634778
3351711: RNCC: 3 | RNVC: 2

15 Jun 1982

5340-15-008-5538
Rubber Bumper

150085538
012330 X: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-008-6198
Resilient Mount

150086198
128348: RNCC: 3 | RNVC: 2

11 Sep 1981

5340-15-007-2739
Cappello Per Molla

150072739
1386631: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-150-1145
Manual Control Lever

151501145
77800174: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-178-4937
Dust And Moisture Seal Protective Cap

151784937
308193: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-063-3347
Dust And Moisture Seal Protective Cap-Plug

150633347
60104987: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-205-1418
Escutcheon Plate

152051418
1386160Z02: RNCC: 3 | RNVC: 2
(241)AB5551386160Z02: RNCC: 5 | RNVC: 2

21 Feb 2012

5340-15-193-2480
Angle Bracket

151932480
504217260: RNCC: 3 | RNVC: 2
(241)A4249504217260: RNCC: 5 | RNVC: 2

22 Apr 2010

5340-15-148-6443
Stand Base (1)

151486443
190515350: RNCC: 3 | RNVC: 2

17 Sep 1998

5340-15-160-0222
Lucchetto C.

151600222
F720053871: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-156-2043
Staffa Di Attacco P

151562043
(241)A3460CBD70761P23: RNCC: 3 | RNVC: 2
CBD70761P23: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-002-5969
Angle Bracket

150025969
504382802: RNCC: 3 | RNVC: 2

4 Sep 2013

5340-15-153-2135
Threaded End Tensioning Tie Rod

151532135
122520125: RNCC: 3 | RNVC: 2

12 Dec 2000

5340-15-001-7793
Nut And Bolt Retainer

150017793
8053144: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-121-9056
Supporto Complessiv

151219056
142502921: RNCC: 3 | RNVC: 2

19 Mar 1996

5340-15-139-4616
Tirante

151394616
4762314: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-154-9318
Protective Cover

151549318
CBD71017P01: RNCC: 3 | RNVC: 2

13 Nov 2001

5340-15-183-2216
Serratura Cifrata

151832216
SERRATURA CIFRATA PER ARMADIO CO: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-155-4439
Base

151554439
CBD71049P01: RNCC: 3 | RNVC: 2

25 Mar 2002

5340-15-155-3752
Complessi Manopola

151553752
M38007090: RNCC: 3 | RNVC: 2

6 Mar 2002

5340-15-127-3320
Staffa Fissaggio Ca

151273320
742809: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-003-1432
Positioning Thrust Stop Half

150031432
5949791450: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-153-6280
Headless Straight Rod

151536280
142025146: RNCC: 3 | RNVC: 2

16 Feb 2001

5340-15-200-9847
Rotore A Tre Coppe

152009847
CT2228A: RNCC: 3 | RNVC: 2
(241)A8007CT2228A: RNCC: 5 | RNVC: 2

26 Apr 2006

5340-15-066-1271
Handle

150661271
MRA819-4: RNCC: 3 | RNVC: 2

10 Feb 1986

5340-15-127-4239
Blocchetto Guida Ti

151274239
844922: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-148-2482
Supporto Con Boccol

151482482
W011189: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-15-166-5121
Lucchetto Di Sicure

151665121
26540849: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-181-4218
Inserto

151814218
354533-1: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-102-3520
Nut And Bolt Retainer

151023520
25091-8: RNCC: 3 | RNVC: 2
25091-8: RNCC: 5 | RNVC: 9

12 Oct 1987

5340-15-203-4534
Supporting Plate

152034534
N632U1007201: RNCC: 3 | RNVC: 2

4 Feb 2008

5340-15-170-5448
Headless Straight Rod

151705448
1625/7-AST: RNCC: 2 | RNVC: 2
CC09: RNCC: 3 | RNVC: 2

18 Mar 2003

5340-15-074-4239
Turnbuckle

150744239
1D16UNI2019A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-203-8504
Adattatore Elettrov

152038504
SUPVA0204: RNCC: 3 | RNVC: 2
(241)A4114SUPVA0204: RNCC: 5 | RNVC: 2

7 Jul 2011

5340-15-063-0757
Nut And Bolt Locking Plate

150630757
8954875: RNCC: 3 | RNVC: 2

15 Jun 1982

5340-15-207-8711
Utility Resilient Mount

152078711
504374861: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-115-7821
Dust And Moisture Seal Protective Plug

151157821
MO4167: RNCC: 3 | RNVC: 2

10 Sep 1993

5340-15-120-1589
Resilient Mount

151201589
4-50690.0005//D: RNCC: 5 | RNVC: 2
4-50690.0005//D: RNCC: 5 | RNVC: 9

17 Jan 1995

5340-15-117-0866
Helical Compression Spring Seat

151170866
4601302: RNCC: 3 | RNVC: 2

20 Jul 1995

5340-15-116-4923
Helical Compression Spring Seat

151164923
93812500: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-008-3279
Helical Compression Spring Retainer

150083279
543964: RNCC: 3 | RNVC: 2

12 Oct 1980

5340-15-055-6124
Semistaffe Mobile

150556124
637927: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-195-4264
Angle Bracket

151954264
1Q 312054: RNCC: 3 | RNVC: 2
(241)A98401Q312054: RNCC: 5 | RNVC: 2

23 Mar 2011

5340-15-205-4944
Dust And Moisture Seal Protective Cap

152054944
182719411: RNCC: 3 | RNVC: 2
(241)A0199182719411: RNCC: 5 | RNVC: 2

14 Mar 2012

5340-15-103-0397
Tirante Filettato

151030397
79005178: RNCC: 3 | RNVC: 2

21 Jun 1987

5340-15-193-9887
Dust And Moisture Seal Protective Cover

151939887
389.00: RNCC: 3 | RNVC: 2

11 Aug 2010

5340-15-213-3518
Catenaccio Ottone

152133518
CATENACCIOOTTONE: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-120-3491
Double Angle Bracket

151203491
60177276: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-187-0426
Piastrina

151870426
NS9C001-1: RNCC: 3 | RNVC: 2
(241)A2142NS9C001-1: RNCC: 5 | RNVC: 2

3 Feb 2009

5340-15-198-1993
Piastra

151981993
19239785-2.5: RNCC: 3 | RNVC: 2

24 Jun 2004

5340-15-125-0736
Semigancio

151250736
NOR116-1: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-185-9679
Ammortizzatore Per

151859679
HELICAL HP S F01: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-115-5449
Coperchietto Lato

151155449
D0469156: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-231-1012
Catenaccio

152311012
003495.22: RNCC: 3 | RNVC: 2
534015E122889: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-231-1128
Lucchetto Mm.25

152311128
552: RNCC: 3 | RNVC: 2
534015E015382: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-231-1130
Lucchetto Con Combi

152311130
0420: RNCC: 3 | RNVC: 2
534015E038873: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-166-5113
Lucchetto Monoblocc

151665113
2201040: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-112-8519
Puntalino

151128519
469529: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-166-4760
Staffetta

151664760
850300: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-122-2219
Kit De 2 Barillets

151222219
800072513: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-230-2474
Tappo A Scodellino

152302474
321730F91: RNCC: 3 | RNVC: 2
534015E123203: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-112-3750
Control Rod

151123750
60143428: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-074-4250
Turnbuckle

150744250
2D12UNI2019AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-196-6299
Padlock

151966299
PN UAS 00038959: RNCC: 3 | RNVC: 2
5340F76033324: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-162-1816
Handwheel

151621816
20004: RNCC: 3 | RNVC: 2

3 Apr 2001

5340-15-115-1086
Corrosion Preventive Anode

151151086
213402057: RNCC: 3 | RNVC: 2

25 Mar 1993

5340-15-198-4312
Dust And Moisture Seal Protective Plug

151984312
122505574: RNCC: 3 | RNVC: 2

27 Sep 2004

5340-15-103-6679
Sealing Plug Assembly

151036679
24009305A: RNCC: 3 | RNVC: 2

26 Nov 1987

5340-15-189-3755
Nut And Bolt Locking Plate

151893755
721299220600: RNCC: 3 | RNVC: 2

17 Feb 2010

5340-15-149-2979
Convogliatore Aria

151492979
4882744: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-219-7421
Cilindro Cm.6

152197421
6000060: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-153-5982
Base (1) Per Sosteg

151535982
5340151535982: RNCC: 2 | RNVC: 2
142018188: RNCC: 3 | RNVC: 2

16 Feb 2001

5340-15-177-3684
Manual Control Lever

151773684
VL170011012: RNCC: 3 | RNVC: 2
017785: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-150-3912
Dust And Moisture Seal Protective Cap

151503912
M265: RNCC: 3 | RNVC: 2

2 Dec 1999

5340-15-112-8452
Coperchio

151128452
467368: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-145-3160
Plate Hook Shape

151453160
D1416220: RNCC: 3 | RNVC: 2

15 Dec 1997

5340-15-166-4798
Tappo Irf

151664798
010269196: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-215-3475
Cerniera Inox 60X40

152153475
23716: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-074-4419
Turnbuckle

150744419
1B16UNI2021A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-116-0586
Threaded End Tensioning Tie Rod

151160586
1210522451: RNCC: 3 | RNVC: 2
1210522451: RNCC: 5 | RNVC: 9

17 Dec 1993

5340-15-188-6711
Quick Release Plunger

151886711
GN.35104: RNCC: 3 | RNVC: 2
(241)A0199157667277: RNCC: 5 | RNVC: 2
157667277: RNCC: 5 | RNVC: 2

21 Oct 2009

5340-15-163-2434
Plug

151632434
10276401: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-155-2725
Resilient Mount

151552725
60172471: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-15-127-0325
Turnbuckle

151270325
UT116TAV1FG14: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-112-2674
Helical Compression Spring Seat

151122674
773152: RNCC: 3 | RNVC: 2

30 Apr 1988

5340-15-205-5136
Cornice

152055136
179005185: RNCC: 3 | RNVC: 2
(241)A0199179005185: RNCC: 5 | RNVC: 2

15 Mar 2012

5340-15-178-3023
Pipe Bracket

151783023
1Q 341904: RNCC: 3 | RNVC: 2

29 Apr 2005

5340-15-217-7180
Cilindri 70 Viro Ce

152177180
VIRO: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-194-4365
Closing Block Conne

151944365
21310115: RNCC: 3 | RNVC: 2

12 Nov 2010

5340-15-193-1581
Angle Bracket

151931581
504147891: RNCC: 3 | RNVC: 2
(241)A4249504147891: RNCC: 5 | RNVC: 2

20 Apr 2010

5340-15-002-2296
Access Door Locking Ring

150022296
11.227.52.01: RNCC: 3 | RNVC: 2

30 Jul 2013

5340-15-198-4956
Anello Centraggio M

151984956
D0475768: RNCC: 3 | RNVC: 2
(241)A0461D0475768: RNCC: 5 | RNVC: 2

7 Oct 2004

5340-15-185-5429
Lucchetto Yale Rett

151855429
MM55: RNCC: 3 | RNVC: 9

30 Dec 2008

5340-15-156-3906
Flange

151563906
(241)A3460CBD70765P01: RNCC: 3 | RNVC: 2
CBD70765P01: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-139-5343
Tirante

151395343
8569228: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-190-8932
Tassello Fscher Con

151908932
LIVIA1924: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-100-2711
Line Supporting Strap

151002711
93568-001: RNCC: 3 | RNVC: 2

1 Dec 1986

5340-15-147-9660
Dust And Moisture Seal Protective Cap-Plug

151479660
T3.02.00.008: RNCC: 3 | RNVC: 2

27 May 1998

5340-15-148-6204
Dust And Moisture Seal Protective Plug

151486204
V36267.00: RNCC: 3 | RNVC: 2

15 Sep 1998

5340-15-001-2598
Headless Straight Rod

150012598
12900000908R: RNCC: 3 | RNVC: 2

11 Jun 2013

5340-15-136-0994
Staffa Di Fissaggio

151360994
4696837: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-136-2603
Staffa

151362603
7302237: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-219-7292
Piastra Per Laminat

152197292
50X50: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-136-7430
Lock

151367430
23003503: RNCC: 3 | RNVC: 2
23003503: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-180-3943
Corrosion Preventive Anode

151803943
5852527801RM: RNCC: 3 | RNVC: 2
(241)A31215852527801RM: RNCC: 5 | RNVC: 2

8 May 2008

5340-15-148-2163
Turnbuckle

151482163
8207.02.04: RNCC: 3 | RNVC: 2

4 Aug 1998

5340-15-156-2148
Positioning Support

151562148
CBD71163P13: RNCC: 3 | RNVC: 2
(241)A3460CBD71163P13: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-147-8226
Tappo Sensori Press

151478226
W011090: RNCC: 3 | RNVC: 2

9 Jun 1998

5340-15-113-8562
Resilient Mount

151138562
1R 517427LA: RNCC: 3 | RNVC: 2
1R 517427LA: RNCC: 5 | RNVC: 9

19 May 1993

5340-15-148-0606
Assieme Maniglia

151480606
263A1611-403: RNCC: 3 | RNVC: 2

16 Jun 1998

5340-15-009-0899
Rubber Bumper

150090899
8557659: RNCC: 3 | RNVC: 2
821DN0018: RNCC: 5 | RNVC: 2

1 Jun 1987

5340-15-109-8971
Obturator

151098971
D0369420: RNCC: 3 | RNVC: 2
369420: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-119-7427
Blank Cover

151197427
01TC20885: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-232-3832
Rondella

152323832
5387/9 3-12/13: RNCC: 3 | RNVC: 2
534015E150082: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-112-8383
Bussolap

151128383
466817: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-103-1880
Complessi Sportello

151031880
DE013.09.975: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-166-5257
Telaio

151665257
542149: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-232-9559
Tassello

152329559
534015E051090: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-166-4891
Fascetta Cablaggio

151664891
FS500DWC: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-119-7713
Nonmetallic Bumper

151197713
9430973: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-122-5591
Rod

151225591
01TL21183: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-121-6549
Nonmetallic Bumper

151216549
800050654: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-061-2686
Electrical-Me Post

150612686
1200096-122300007: RNCC: 5 | RNVC: 2
000200095700: RNCC: 5 | RNVC: 2
000200095700: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-134-6630
Staffa Paraurti

151346630
4410095: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-211-1698
Confezione Punti Pz

152111698
69900050: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-166-5254
Contropiastra Elett

151665254
120516: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-199-8479
Testa Di Fissaggio

151998479
9CS3703083: RNCC: 3 | RNVC: 2
(241)A91729CS3703083: RNCC: 5 | RNVC: 2

14 Jun 2005

5340-15-198-8882
Dust And Moisture Seal Protective Plug

151988882
N632G2194201: RNCC: 3 | RNVC: 2
(241)A0126N632G2194201: RNCC: 5 | RNVC: 2

24 Nov 2004

5340-15-195-2022
Dust And Moisture Seal Boot

151952022
76034178: RNCC: 3 | RNVC: 2

7 Mar 2011

5340-15-178-6863
Blank Panel

151786863
A156429-2: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-158-3535
Helical Compression Spring Seat

151583535
22252/X: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-15-125-5930
Fascetta

151255930
S6130-80215-1: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-148-6202
Dust And Moisture Seal Protective Plug

151486202
V36265.00: RNCC: 3 | RNVC: 2

15 Sep 1998

5340-15-181-7800
Maniglia Premiapri

151817800
N12NE: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-103-1958
Convogliatore Aria

151031958
DE013.13.396: RNCC: 3 | RNVC: 2
(241)A5015DE013.13.396: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-195-0119
Dust And Moisture Seal Protective Plug

151950119
GE04319: RNCC: 3 | RNVC: 2
(241)A2437GE04319: RNCC: 5 | RNVC: 2

16 Feb 2011

5340-15-178-2693
Dust And Moisture Seal Protective Cap

151782693
0M01331000: RNCC: 3 | RNVC: 2

29 Apr 2005

5340-15-193-1639
Angle Bracket

151931639
504159508: RNCC: 3 | RNVC: 2
(241)A4249504159508: RNCC: 5 | RNVC: 2

20 Apr 2010

5340-15-116-0353
Tronchetto Tubo Ent

151160353
TEC-120-140-90: RNCC: 3 | RNVC: 2

7 Oct 1994

5340-15-204-4849
Utility Resilient Mount

152044849
105112020: RNCC: 3 | RNVC: 2
105112020: RNCC: 5 | RNVC: 2
CV173638: RNCC: 5 | RNVC: 2

7 Nov 2011

5340-15-179-8972
Headless Straight Rod

151798972
D1404692: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-007-9944
Nut And Bolt Retainer

150079944
1377675: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-004-1294
Helical Compression Spring Seat

150041294
4363098: RNCC: 3 | RNVC: 2
4363098: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-180-8344
Rh Bracket Assembly

151808344
N714G1040101: RNCC: 3 | RNVC: 2
(241)A0126N714G1040101: RNCC: 5 | RNVC: 2

28 Jul 2008

5340-15-170-3307
Bracket

151703307
204-6350-41-9: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-112-8234
Blocchettosecondas

151128234
466465: RNCC: 3 | RNVC: 2
(241)A0461466465: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-003-1441
Dust And Moisture Seal Protective Cap-Plug

150031441
5949791331: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-105-6289
Collare Serraggio

151056289
899258: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-164-1884
Turnbuckle

151641884
41003076: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-159-4735
Padlock

151594735
PN UAS 00028239: RNCC: 3 | RNVC: 2
5340F76010802: RNCC: 5 | RNVC: 9

31 Mar 2004

5340-15-001-1127
Escutcheon Plate

150011127
5801360128: RNCC: 3 | RNVC: 2

31 May 2013

5340-15-068-1819
Nut And Bolt Locking Plate

150681819
469281: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-15-107-4470
Helical Compression Spring Seat

151074470
1P 245211: RNCC: 3 | RNVC: 2
1P 245211: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-153-5178
Dust And Moisture Seal Protective Plug

151535178
142014157: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-153-2586
Headless Straight Rod

151532586
122606435: RNCC: 3 | RNVC: 2

12 Dec 2000

5340-15-179-4367
Helical Compression Spring Retainer

151794367
46185210: RNCC: 3 | RNVC: 2

28 Nov 2006

5340-15-200-9862
Resilient Mount

152009862
UZ574PWH831BFM: RNCC: 3 | RNVC: 2
(241)A5205UZ574PWH831BFM: RNCC: 5 | RNVC: 2

26 Apr 2006

5340-15-112-7498
Cap

151127498
99080083: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-177-3978
Manual Control Handle

151773978
040011: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-148-5058
Headless Straight Rod

151485058
8867829: RNCC: 3 | RNVC: 2

13 Aug 1999

5340-15-005-1633
Nut And Bolt Locking Plate

150051633
1378742: RNCC: 3 | RNVC: 2
1378742: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-118-2835
Cannotto Di Aliment

151182835
D0484919: RNCC: 3 | RNVC: 2

20 Apr 1995

5340-15-185-7146
Confezione Fischer

151857146
00265: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-115-7080
Braccio Per Leva Sp

151157080
D0470018: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-166-5221
Splined Shaft

151665221
1307731: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-156-2147
Lef Lateral Support

151562147
CBD71163P17: RNCC: 3 | RNVC: 2
(241)A3460CBD71163P17: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-101-7817
Fascetta Speciale

151017817
SC32674.50: RNCC: 3 | RNVC: 2

21 Jul 1987

5340-15-136-2484
Tappo Per Valvola D

151362484
M6758476: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-119-5442
Sostegno E Supporto

151195442
1R 575442: RNCC: 3 | RNVC: 2
1R 575442: RNCC: 5 | RNVC: 9

21 Mar 1996

5340-15-119-3113
Label

151193113
PS701-5109-001: RNCC: 3 | RNVC: 2

8 Jul 1994

5340-15-178-9934
Guide

151789934
RS 404 764: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-202-2848
Semicollare Di Arre

152022848
98431475: RNCC: 3 | RNVC: 2
(241)A424998431475: RNCC: 5 | RNVC: 2

19 Feb 2007

5340-15-118-8257
Helical Compression Spring Seat

151188257
9448959: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-170-6129
Dust And Moisture Seal Protective Cap

151706129
FK0C90REP20: RNCC: 3 | RNVC: 2
CAE00272: RNCC: 5 | RNVC: 2

2 Apr 2003

5340-15-117-1988
Helical Compression Spring Retainer

151171988
121102135: RNCC: 3 | RNVC: 2
(241)A0199121102135: RNCC: 5 | RNVC: 2

2 Sep 1993

5340-15-007-1970
Nut And Bolt Locking Plate

150071970
1384233: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-145-2309
Dust And Moisture Seal Protective Cap-Plug

151452309
20H017: RNCC: 3 | RNVC: 2

2 Jun 1997

5340-15-001-3351
Angle Bracket

150013351
504381133: RNCC: 3 | RNVC: 2

17 Jun 2013

5340-15-004-1845
Dust And Moisture Seal Protective Cap-Plug

150041845
4047750: RNCC: 3 | RNVC: 2
4047750: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-118-0356
Braccio In Acciaio

151180356
469357: RNCC: 3 | RNVC: 2
D0469357: RNCC: 3 | RNVC: 2

14 Dec 1994

5340-15-118-1185
Control Rod

151181185
1R 576728: RNCC: 3 | RNVC: 2
1R 576728: RNCC: 5 | RNVC: 9

30 Jan 1995

5340-15-065-4967
Fascetta

150654967
105-3018: RNCC: 3 | RNVC: 2

9 Jun 1985

5340-15-074-4402
Turnbuckle

150744402
1A10UNI20210T60-2012A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-156-0633
Beam Gripping Clamp

151560633
14HJ04343021S01-407/2: RNCC: 3 | RNVC: 2

19 Nov 2002

5340-15-074-4328
Turnbuckle

150744328
2B12UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-118-0505
Asta Telescopica Sc

151180505
D0489433: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-178-4928
Dust And Moisture Seal Protective Cap

151784928
308189: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-206-2685
Stand Base

152062685
10.45.K0.500.101: RNCC: 3 | RNVC: 2

1 Jun 2012

5340-15-116-9647
Slug

151169647
W019777: RNCC: 3 | RNVC: 2

16 May 1996

5340-15-116-9722
Harness

151169722
W004819: RNCC: 3 | RNVC: 2
(7001)5340151169722: RNCC: 5 | RNVC: 2

18 Nov 1997

5340-15-231-2194
Tassello Elastico

152312194
7760424: RNCC: 3 | RNVC: 2
534015E122738: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-110-3399
Cable Clamp

151103399
3326: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-156-2042
Staffa Di Attacco P

151562042
(241)A3460CBD70761P34: RNCC: 3 | RNVC: 2
CBD70761P34: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-059-9381
Escutcheon Plate

150599381
10831-9: RNCC: 3 | RNVC: 2

16 Oct 1976

5340-15-139-2296
Tirante

151392296
79010946: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-113-8745
Sospensioneantiurto

151138745
1Q 520444LB: RNCC: 3 | RNVC: 2
1Q 520444LB: RNCC: 5 | RNVC: 9

21 May 1993

5340-15-178-9306
Protection Anti-Pou

151789306
FG075MD223AA00: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-15-237-2025
Flangia

152372025
102660: RNCC: 3 | RNVC: 2
534015E032744: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-207-3604
Utility Resilient Mount

152073604
9287440: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-15-122-0451
Cam Pivot Journal

151220451
600130: RNCC: 3 | RNVC: 2

23 Apr 1996

5340-15-112-8434
Fondello

151128434
469711: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-179-7170
Dust And Moisture Seal Protective Cover

151797170
0000500410012: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-117-1982
Detent Plate

151171982
190515297: RNCC: 3 | RNVC: 2

2 Sep 1993

5340-15-231-0660
Staffetta Di Fissag

152310660
00272PMPN: RNCC: 3 | RNVC: 2
534015E136547: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-179-6753
Double Angle Bracket

151796753
0000500406020: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-156-3333
Removal Drift Assy

151563333
(241)A3460CBD71225G01: RNCC: 3 | RNVC: 2
CBD71225G01: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-15-156-3685
Oil Filter Plug

151563685
(241)A3460CBD71333G01: RNCC: 3 | RNVC: 2
CBD71333G01: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-155-9331
Supporto Destro Com

151559331
60187530: RNCC: 3 | RNVC: 2

7 Oct 2002

5340-15-101-3002
Hinge Half

151013002
P-135198-003: RNCC: 3 | RNVC: 2
P135198-003: RNCC: 5 | RNVC: 2

30 Jan 1988

5340-15-007-5525
Dust And Moisture Seal Protective Cap

150075525
W003148B: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-105-8136
Turnbuckle Body

151058136
4507092: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-219-4406
Dima Componibile Pe

152194406
071464400: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-118-6462
Positinneur

151186462
75207722: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-068-1857
Fermo Sferico

150681857
476713: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-15-199-4883
Nut And Bolt Locking Plate

151994883
1Z 604343: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-15-109-4690
Threaded End Tensioning Tie Rod

151094690
1Q 567261LA: RNCC: 3 | RNVC: 2
1Q 567261LA: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-103-4260
Nut And Bolt Locking Plate

151034260
276983ART29: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-198-2833
Dust And Moisture Seal Protective Cap-Plug

151982833
JNT62N001: RNCC: 3 | RNVC: 2

14 Sep 2004

5340-15-104-8871
Fissaggio Gaffetta

151048871
38807988: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-219-8851
Anchor Strap

152198851
CM.2X5XM.4,5-CON GANCIO: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-105-5970
Staffa A Gomito

151055970
8978/S: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-105-5973
Staffa A Gomito

151055973
002.9065.2: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-102-0375
Dust And Moisture Seal Protective Cap

151020375
XCAP517: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-002-3119
Angle Bracket

150023119
5801322529: RNCC: 3 | RNVC: 2

6 Aug 2013

5340-15-152-4742
Bracket

151524742
NN77718P01: RNCC: 3 | RNVC: 2

18 Sep 2000

5340-15-134-6197
Staffa Anterioriore

151346197
4424644: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-116-9218
Bearin Plug

151169218
01TC20211: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-158-5757
Special Protezione

151585757
122512113: RNCC: 3 | RNVC: 2

9 Mar 2004

5340-15-103-2073
Semicono

151032073
L8057001: RNCC: 3 | RNVC: 2
DE160.03.153: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-121-6277
Nonmetallic Bumper

151216277
800032542: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-002-5968
Angle Bracket

150025968
5801388460: RNCC: 3 | RNVC: 2

4 Sep 2013

5340-15-116-8560
Busta Portaguarnizi

151168560
D1402565: RNCC: 3 | RNVC: 2

8 Apr 1994

5340-15-204-5916
Paracolpo Gomma

152045916
WMP053000103: RNCC: 3 | RNVC: 2
(241)A2309WMP053000103: RNCC: 5 | RNVC: 2

22 Nov 2011

5340-15-232-6161
Cerniera

152326161
00000020: RNCC: 3 | RNVC: 2
534015E088577: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-001-7945
Dust And Moisture Seal Protective Cap

150017945
41297047: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-002-5273
Screen Door Hardware Set

150025273
504129854: RNCC: 3 | RNVC: 2

2 Sep 2013

5340-15-186-9123
Spacing Threaded Standoff

151869123
353282: RNCC: 3 | RNVC: 2
353282: RNCC: 5 | RNVC: 9

5 Jan 2009

5340-15-127-3956
Anello

151273956
2260-32910: RNCC: 3 | RNVC: 2
2260-32910: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-122-2544
Dedoubleur Cable

151222544
800021198: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-116-9262
Valve

151169262
VPP07D10: RNCC: 3 | RNVC: 2
91641488: RNCC: 5 | RNVC: 2

28 Jul 1993

5340-15-106-2548
Sostegno El Piastra

151062548
4871773: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-198-7914
Blocchetto Per Racc

151987914
60188360: RNCC: 3 | RNVC: 2

17 Nov 2004

5340-15-003-1471
Positioning Thrust Stop Half

150031471
5949791456: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-148-6385
Access Cover

151486385
190509314: RNCC: 3 | RNVC: 2

17 Sep 1998

5340-15-206-3398
Manual Control Handle

152063398
8407106: RNCC: 3 | RNVC: 2

4 Jun 2012

5340-15-214-6247
Contropiastra

152146247
032021: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-119-7793
Runner

151197793
9460546: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-217-6896
Chiave Blitz Curva

152176896
99359: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-190-8873
Ammortizzatori Vibr

151908873
0139-2: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-005-6913
Tappo Speciale

150056913
0-33685: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-119-3466
Pressacavo Speciale

151193466
992114286N: RNCC: 3 | RNVC: 2

11 Feb 2000

5340-15-119-3161
Flange

151193161
79038437: RNCC: 3 | RNVC: 2

11 Jul 1994

5340-15-153-8424
Base (1) Per Sosteg

151538424
01900A103900: RNCC: 5 | RNVC: 3
01900A103900: RNCC: 5 | RNVC: 9

2 Mar 2001

5340-15-153-5992
Base (1) Per Sosteg

151535992
142018248: RNCC: 3 | RNVC: 2

16 Feb 2001

5340-15-178-4005
Dust And Moisture Seal Protective Cap-Plug

151784005
155568-1: RNCC: 3 | RNVC: 2

31 May 2005

5340-15-000-8628
Double Monitor Supp

150008628
8200401M0683: RNCC: 3 | RNVC: 2

12 Apr 2013

5340-15-107-5718
Rullo Per Ganascia

151075718
DE013.14.144: RNCC: 3 | RNVC: 2

5 Jan 1989

5340-15-064-6237
Dust And Moisture Seal Protective Plug

150646237
01TC20221: RNCC: 3 | RNVC: 2

15 Jun 1983

5340-15-138-2879
Padlock

151382879
220/50: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-166-4915
Serratura Da Infila

151664915
4416080: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-051-3750
Staffa

150513750
9913216: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-188-6443
Lifting Bracket

151886443
CBD71580P01: RNCC: 3 | RNVC: 2
(241)A3460CBD71580P01: RNCC: 5 | RNVC: 2

20 Oct 2009

5340-15-154-2242
Control Rod

151542242
60170738: RNCC: 3 | RNVC: 2
1PA424960170738: RNCC: 8 | RNVC: 2

28 Mar 2001

5340-15-195-0149
Ol Protective Cover

151950149
CBD71634G01: RNCC: 3 | RNVC: 2
(241)A3460CBD71634G01: RNCC: 5 | RNVC: 2

16 Feb 2011

5340-15-203-9071
Dust And Moisture Seal Protective Plug

152039071
6840364-8: RNCC: 3 | RNVC: 2
(241)A01896840364-8: RNCC: 5 | RNVC: 2

22 Jul 2011

5340-15-163-2392
Plug

151632392
9982728: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-107-1719
Left Hand Hinge

151071719
RS412296A: RNCC: 3 | RNVC: 2

24 May 1989

5340-15-179-2740
Utility Resilient Mount

151792740
SUP-228-IC: RNCC: 3 | RNVC: 2

10 Aug 2006

5340-15-045-3273
Control Rod

150453273
527-20-08: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-005-9664
Unavailable

150059664
13104: RNCC: 3 | RNVC: 2

11 Dec 2013

5340-15-163-3903
Spacing Threaded Standoff

151633903
95350383: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-116-0550
Helical Compression Spring Seat

151160550
1P 241818: RNCC: 3 | RNVC: 2
1P 241818: RNCC: 5 | RNVC: 9

15 Dec 1993

5340-15-205-8514
Multiple Angle Bracket

152058514
5801329699: RNCC: 3 | RNVC: 2

6 Apr 2012

5340-15-214-4836
Sbobinatore Per Gua

152144836
09561096: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-006-2648
Anello Speciale

150062648
0-02659: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-064-9433
Targa

150649433
700549/E: RNCC: 3 | RNVC: 2

28 Aug 1979

5340-15-178-2135
Plug

151782135
1863-7: RNCC: 3 | RNVC: 2

11 Mar 2005

5340-15-233-4051
Ammortizzatore Graf

152334051
340321A: RNCC: 3 | RNVC: 2
534015E101427: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-115-7003
Piastra Di Collegam

151157003
D1401059: RNCC: 3 | RNVC: 2

10 Mar 1994

5340-15-163-1423
Support

151631423
1326209080: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-160-7684
Lucchetto Comb.

151607684
F720152241: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-143-5681
Molla

151435681
707120B: RNCC: 3 | RNVC: 2
T2N38: RNCC: 3 | RNVC: 2

11 Dec 1996

5340-15-136-1377
Morsetto

151361377
4671620: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-041-5581
Fascetta

150415581
V12924-3: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-112-3866
Tappo Serbatoio Oli

151123866
031721/1: RNCC: 3 | RNVC: 2

1 Jul 1990

5340-15-120-0583
Resilient Mount

151200583
3-76717.0003//D: RNCC: 5 | RNVC: 2
3-76717.0003//D: RNCC: 5 | RNVC: 9

12 Dec 1994

5340-15-190-7024
Pflug

151907024
63D36823-9: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-187-1261
Support

151871261
COL10224-1: RNCC: 3 | RNVC: 2

19 Feb 2009

5340-15-154-1808
Camma

151541808
133633-1: RNCC: 3 | RNVC: 2

27 Mar 2001

5340-15-151-9858
Piastra

151519858
0-156580: RNCC: 3 | RNVC: 2

31 Jul 2000

5340-15-156-2005
Base

151562005
(241)A3460CBD71141P01: RNCC: 3 | RNVC: 2
CBD71141P01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-178-7663
Manual Control Lever

151787663
028027: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-189-3753
Nut And Bolt Locking Plate

151893753
721299220300: RNCC: 3 | RNVC: 2

17 Feb 2010

5340-15-055-6801
Squadretta Sinistra

150556801
542191: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-105-6377
Collare Serraggio

151056377
984163: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-213-8821
Maniglia Premi-Apri

152138821
13-NE: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-064-3385
Fork

150643385
620A228: RNCC: 3 | RNVC: 2

10 May 1984

5340-15-209-0111
Deflettore

152090111
N2722: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-107-4447
Turnbuckle Body

151074447
1Q 255431: RNCC: 3 | RNVC: 2
1Q 255431: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-193-0746
Hatch Assembly

151930746
N523G5438103: RNCC: 3 | RNVC: 2
(241)A0126N523G5438103: RNCC: 5 | RNVC: 2

12 Apr 2010

5340-15-193-0745
Attachment Angle

151930745
N523G5363201: RNCC: 3 | RNVC: 2
(241)A0126N523G5363201: RNCC: 5 | RNVC: 2

12 Apr 2010

5340-15-112-8538
Puntalino

151128538
471339: RNCC: 3 | RNVC: 2
D0471339: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-112-2921
Tappo Speciale

151122921
245A2045-401: RNCC: 3 | RNVC: 2

10 Apr 1991

5340-15-107-5713
Staffa Completa

151075713
DE013.13.368: RNCC: 3 | RNVC: 2

5 Jan 1989

5340-15-112-0438
Dispositivo Di Supp

151120438
275A0117-403: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-199-8845
Fungo Bronzo

151998845
80940: RNCC: 3 | RNVC: 2
(241)A098480940: RNCC: 5 | RNVC: 2

26 Jun 2005

5340-15-206-2929
Dust And Moisture Seal Protective Plug

152062929
58641: RNCC: 3 | RNVC: 2
58641: RNCC: 5 | RNVC: 2

1 Jun 2012

5340-15-198-3273
Corrosion Preventive Anode

151983273
DN20DC25: RNCC: 3 | RNVC: 2

22 Sep 2004

5340-15-189-2738
Electrical Receptacle Connector

151892738
D0600365: RNCC: 3 | RNVC: 2

10 Feb 2010

5340-15-121-0915
Corrosion Preventive Anode

151210915
222622E: RNCC: 3 | RNVC: 2

22 Jan 1996

5340-15-118-7733
Helical Compression Spring Seat

151187733
4780558: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-101-7431
Piastra Forata

151017431
P2: RNCC: 3 | RNVC: 2

4 Feb 1994

5340-15-051-5402
Chiave A Doppia Pal

150515402
P0SGDISNP17: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-156-2618
Sealing Plug Assembly

151562618
0550054: RNCC: 3 | RNVC: 2
(241)A97720550054: RNCC: 5 | RNVC: 2

19 Dec 2002

5340-15-001-0411
Tool Sets

150010411
CP8000001447: RNCC: 3 | RNVC: 2

21 May 2013

5340-15-202-2307
Rod

152022307
233A1003-005: RNCC: 3 | RNVC: 2
(241)A0019233A1003-005: RNCC: 5 | RNVC: 2

13 Feb 2007

5340-15-213-8603
Fermaporta A Pedale

152138603
247: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-191-5269
Morsetto A Mano In

151915269
3330/1-52: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-149-2550
Cerniera Sportello

151492550
311A5518-751: RNCC: 3 | RNVC: 2

12 Jan 1999

5340-15-112-8572
Puntalinos

151128572
466967: RNCC: 3 | RNVC: 2
D0466967: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-109-4813
Helical Compression Spring Seat

151094813
528249: RNCC: 2 | RNVC: 2
1P 528249: RNCC: 3 | RNVC: 2
1P 528249: RNCC: 5 | RNVC: 9
528249: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-007-2630
Nut And Bolt Locking Plate

150072630
1389126: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-166-5152
Rotella

151665152
2270245: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-166-5102
Bearing Rod End

151665102
SM534300012: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-216-9661
Angolare

152169661
0769: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-142-3752
Serratura

151423752
480SR110N001: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-127-5193
Molla Rich.Leva Com

151275193
874499: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-002-1429
Multiple Angle Bracket

150021429
5801386172: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-105-5962
Staffa A Gomito

151055962
1367042: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-114-0134
Rubber Bumper

151140134
000.369-P: RNCC: 3 | RNVC: 2

15 Apr 1992

5340-15-217-2681
Guarnitura Doppia C

152172681
116DC08: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-212-6044
6 In Fascette 200X3

152126044
5214/CE: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-119-5408
Carter Protezione C

151195408
D0484498: RNCC: 3 | RNVC: 2

24 Mar 1995

5340-15-005-6889
Piastra Speciale

150056889
0-33809: RNCC: 3 | RNVC: 2

12 Aug 1979

5340-15-147-3540
Fascetta Di Fissagg

151473540
75116: RNCC: 3 | RNVC: 2

31 Oct 1997

5340-15-179-8771
Switch Actua Block

151798771
C7315W2B1.01: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-103-4125
Ring

151034125
276447ART65: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-151-4739
Fermo Anteriore

151514739
UOHL0090200: RNCC: 3 | RNVC: 2

29 May 2000

5340-15-068-2324
Anchor Strap

150682324
W011558: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-166-5117
Tappo

151665117
A1043059101: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-074-4105
Turnbuckle

150744105
1C33UNI2018A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-061-6747
Cover Plate Access

150616747
0001/M2: RNCC: 3 | RNVC: 2

26 Feb 1980

5340-15-214-6245
Maniglione Antipani

152146245
946013: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-068-5827
Rod Grooved Headles

150685827
500333/648: RNCC: 3 | RNVC: 2

10 Apr 1986

5340-15-120-6867
Cannotto Di Aliment

151206867
D0483218: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-103-6760
Swivel Caste Frame

151036760
24009414A: RNCC: 3 | RNVC: 2

26 Nov 1987

5340-15-051-4189
Rosetta Bloccaggio

150514189
874488: RNCC: 3 | RNVC: 2
874488: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-188-0849
Manual Control Lever

151880849
157611117: RNCC: 3 | RNVC: 2

2 Jul 2009

5340-15-212-1698
Fissatubo 0 16

152121698
FGRI16: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-177-4116
Rigid Surface Mechanical Patch

151774116
045785: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-208-8307
Lucchetto Yale Da M

152088307
70: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-209-0139
Lucchetto A Combina

152090139
189-45E80: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-215-3132
Ruota Girevole Mm.1

152153132
9786: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-105-6021
Staffa A Gomito

151056021
9909090: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-045-3140
Fascetta A Nastro

150453140
N0R2-508-00-230: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-154-7509
Sacchetto Pallini D

151547509
ZMD98XX-PDR094: RNCC: 3 | RNVC: 2

17 Sep 2001

5340-15-113-4666
Gancio

151134666
205-8130-48-1: RNCC: 3 | RNVC: 2

24 Mar 1998

5340-15-074-4061
Turnbuckle

150744061
1B33UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-112-9186
Helical Compression Spring Seat

151129186
71055: RNCC: 3 | RNVC: 2

16 Nov 1995

5340-15-188-6487
Angle Bracket

151886487
CBD71617P01: RNCC: 3 | RNVC: 2
(241)A3460CBD71617P01: RNCC: 5 | RNVC: 2

20 Oct 2009

5340-15-001-8273
Flange Attachement

150018273
5949784410: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-181-2390
Tappo Portamolla

151812390
5C345: RNCC: 3 | RNVC: 2
C5C345: RNCC: 5 | RNVC: 2
(241)A01785C345: RNCC: 5 | RNVC: 2

17 Nov 2008

5340-15-103-8646
Control Rod

151038646
8584433: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-198-4304
Access Door

151984304
122510017: RNCC: 3 | RNVC: 2

27 Sep 2004

5340-15-216-0153
Serratura Da Infilo

152160153
520.50: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-142-9068
Plate

151429068
482568: RNCC: 3 | RNVC: 2

22 Oct 1996

5340-15-212-6884
Graffetta Con Chiod

152126884
GRAFFETTAMM8: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-109-9011
Sfera

151099011
470550: RNCC: 3 | RNVC: 2
D0470550: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-152-6259
Perno Con Fermamoll

151526259
16191137: RNCC: 3 | RNVC: 2

3 Oct 2000

5340-15-121-1822
Shock Mount Pad

151211822
GA80: RNCC: 3 | RNVC: 2

31 Jan 1996

5340-15-192-6472
Fascetta

151926472
B2993343: RNCC: 3 | RNVC: 2

26 Mar 2010

5340-15-152-1110
Tappo

151521110
60139298: RNCC: 3 | RNVC: 2

7 Aug 2000

5340-15-216-0711
Piede Di Sostegno D

152160711
DN100FDL: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-074-4304
Turnbuckle

150744304
1B8UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-200-3045
Access Door

152003045
190514926: RNCC: 3 | RNVC: 2

29 Nov 2005

5340-15-163-1209
Clip

151631209
1309961080: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-101-7441
Piastra Non Forata

151017441
600X600X20DIS44125: RNCC: 3 | RNVC: 2

4 Feb 1994

5340-15-074-4382
Turnbuckle

150744382
2C52UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-187-6315
Locking Stay

151876315
99465507: RNCC: 3 | RNVC: 2

15 Apr 2009

5340-15-102-0774
Ala Cerniera A Volo

151020774
213A7179-401: RNCC: 3 | RNVC: 2

29 Jul 1988

5340-15-105-6365
Collare Serraggio

151056365
10418201: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-209-7279
Catena Con Guaina D

152097279
CATENA0,5MT: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-120-8732
Charniere Tableau D

151208732
0208 14393: RNCC: 3 | RNVC: 2

4 Sep 1995

5340-15-074-4433
Turnbuckle

150744433
2B22UNI2021AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-122-3546
Control Rod

151223546
D1403767: RNCC: 3 | RNVC: 2

8 Jun 2000

5340-15-166-5109
Fascetta 360Mm

151665109
FS360DWC: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-005-6956
Fondello Speciale

150056956
0-33823: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-008-9779
Helical Compression Spring Retainer

150089779
56000: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-206-8515
Co-Ordinating Arm

152068515
21310100: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-163-2296
Plug

151632296
4718902: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-160-1102
Padlock

151601102
F720015431: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-191-6127
Ass. Cerniera Di Br

151916127
369H1203-51: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-104-8863
Fissaggio Gaffetta

151048863
834748: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-154-5061
Control Rod

151545061
1R 548208: RNCC: 3 | RNVC: 2
1R 548208: RNCC: 5 | RNVC: 9

20 Jun 2001

5340-15-149-3435
Tappo Copri Polvere

151493435
60162848: RNCC: 3 | RNVC: 2

2 Feb 1999

5340-15-115-7057
Coperchio

151157057
D0470033: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-201-1761
Support Assembly

152011761
N937G3020101: RNCC: 3 | RNVC: 2
(241)A0126N937G3020101: RNCC: 5 | RNVC: 2

12 Jun 2006

5340-15-166-5227
Filter Gro Bracket

151665227
83468501: RNCC: 3 | RNVC: 2
83468501: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-221-6969
Padlock

152216969
5340RI0991775: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-215-6891
Tassello Per Carta

152156891
COD03206A: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-151-4598
Dashpot

151514598
UMG5323120A: RNCC: 3 | RNVC: 2

29 May 2000

5340-15-156-2133
Support

151562133
CBD70761P22: RNCC: 3 | RNVC: 2
(241)A3460CBD70761P22: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-106-3284
Staffa

151063284
4098090: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-231-1114
Copritoppa Esterno

152311114
06081: RNCC: 3 | RNVC: 2
534015E066568: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-067-9504
Sportello Dx

150679504
53.210: RNCC: 3 | RNVC: 2
53.210: RNCC: 3 | RNVC: 2

8 Jul 1986

5340-15-194-4581
Turnbuckle

151944581
58.506.30: RNCC: 3 | RNVC: 2
(241)A492858.506.30: RNCC: 5 | RNVC: 2

18 Nov 2010

5340-15-183-3731
Kit Placchette

151833731
090.1202: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-112-8188
Gruppof

151128188
367028: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-195-1787
Brake Spring Kit

151951787
20141358M: RNCC: 3 | RNVC: 2

7 Mar 2011

5340-15-120-6765
Piastrina Forata Pe

151206765
D1401540: RNCC: 3 | RNVC: 2

29 Jun 1996

5340-15-063-6139
Double Angle Bracket

150636139
4700693: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-120-6178
Helical Compression Spring Seat

151206178
4817424: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-122-2638
Lamelle Clapet

151222638
800035412: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-137-3749
Cappellotto

151373749
V21277: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-149-8528
Prolunga

151498528
D0R0101851: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-15-170-3233
Nut And Bolt Locking Plate

151703233
D1403094: RNCC: 3 | RNVC: 2

19 Jun 2003

5340-15-166-5110
Fascetta 280Mm

151665110
FS280CC: RNCC: 3 | RNVC: 2
(7001)5340151665110: RNCC: 5 | RNVC: 2
FS280DW-C: RNCC: 5 | RNVC: 2

1 Nov 2002

5340-15-155-0959
Special Protezione

151550959
121106182: RNCC: 3 | RNVC: 2

18 Jan 2002

5340-15-156-2032
Upper Base

151562032
(241)A3460CBD71163P05: RNCC: 3 | RNVC: 2
CBD71163P05: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-134-5078
Piastra

151345078
4474564: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-109-5890
Supportodimontaggio

151095890
20530830A: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-231-5686
Rinforzo Dx

152315686
534015E093107: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-109-6292
Access Door

151096292
002928: RNCC: 3 | RNVC: 2

2 Dec 1989

5340-15-007-1804
Resilient Mount

150071804
1383786: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-166-4920
Serratura Ad Infila

151664920
4415080: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-137-3694
Distanziale

151373694
B346098: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-211-6292
Lucchetto Massiama

152116292
ART.1960278: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-074-4098
Turnbuckle

150744098
1C10UNI2018A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-063-4871
Helical Compression Spring Seat

150634871
4675983: RNCC: 3 | RNVC: 2

26 Jul 1995

5340-15-189-3754
Nut And Bolt Locking Plate

151893754
721299220500: RNCC: 3 | RNVC: 2

17 Feb 2010

5340-15-109-4707
Helical Compression Spring Seat

151094707
1Z 589439: RNCC: 3 | RNVC: 2
1Z 589439: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-194-1079
Cerchio

151941079
MR4437218948: RNCC: 3 | RNVC: 2
218948: RNCC: 3 | RNVC: 2
(241)AG622MR4437218948: RNCC: 5 | RNVC: 2

7 Sep 2010

5340-15-101-7446
Piastra Forata

151017446
P17: RNCC: 3 | RNVC: 2

4 Feb 1994

5340-15-181-1706
Complessivo Leva

151811706
178950033: RNCC: 3 | RNVC: 2
(241)A0199178950033: RNCC: 5 | RNVC: 2

5 Nov 2008

5340-15-107-1713
Electrical-Me Post

151071713
C3822223MN: RNCC: 3 | RNVC: 2

24 May 1989

5340-15-219-4664
Carrello Avvolgison

152194664
410183: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-120-9289
Semicerniera

151209289
113A6022-753: RNCC: 3 | RNVC: 2

5 Sep 1995

5340-15-105-6003
Staffa A Gomito

151056003
4549476: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-185-4666
Tasselli A Rete Fip

151854666
12X50R: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-142-5250
Antivibrante

151425250
AT672-S.A.TRAZ.: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-155-4458
Washing F Tank Assy

151554458
CBD71287G01: RNCC: 3 | RNVC: 2

25 Mar 2002

5340-15-115-1085
Corrosion Preventive Anode

151151085
AT-Z-CV93L: RNCC: 3 | RNVC: 2

25 Mar 1993

5340-15-153-7687
Base (1) Per Sosteg

151537687
01900A115550: RNCC: 5 | RNVC: 2
01900A115550: RNCC: 5 | RNVC: 9

27 Feb 2001

5340-15-206-1135
Pattino Di Metallo

152061135
70804: RNCC: 3 | RNVC: 2
(241)A348870804: RNCC: 5 | RNVC: 2

22 May 2012

5340-15-112-0573
Dispositivo Di Chiu

151120573
008A3031-801: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-152-9046
Anodo Anticorrosion

151529046
72696F91: RNCC: 3 | RNVC: 2

7 Nov 2000

5340-15-110-3756
Handwheel

151103756
VR140FP: RNCC: 3 | RNVC: 2
91628209: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-196-9916
Padlock

151969916
PN UAS 00004964: RNCC: 3 | RNVC: 2
5340F76020956: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-109-6261
Serie Anodi

151096261
599009003: RNCC: 3 | RNVC: 2

2 Dec 1989

5340-15-197-6612
Speciale Piastrina

151976612
1M00523008: RNCC: 3 | RNVC: 2

19 Apr 2004

5340-15-118-6121
Bras

151186121
73129358: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-116-9709
Support

151169709
B515MPE066: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-118-0333
Supporto Portaguarn

151180333
D0467929: RNCC: 3 | RNVC: 2

15 Nov 1994

5340-15-230-7710
Perno-Blocc S2525n

152307710
C3747510AV: RNCC: 3 | RNVC: 2
534015E074351: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-197-8789
Pacco Lamellare

151978789
RRSP0070: RNCC: 3 | RNVC: 2

24 May 2004

5340-15-195-8300
Sportello Accesso

151958300
101498: RNCC: 3 | RNVC: 2
(241)A3593101498: RNCC: 5 | RNVC: 2

18 May 2011

5340-15-001-7915
Angle Bracket

150017915
5949789592: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-074-4025
Turnbuckle

150744025
1A76UNI2018A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-061-3785
Supporto Metallico

150613785
P26CA91: RNCC: 5 | RNVC: 2
P26CA91: RNCC: 5 | RNVC: 9

22 Sep 1977

5340-15-233-1831
Collare In Ferro Zi

152331831
CL60: RNCC: 3 | RNVC: 2
534015E072478: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-147-1752
Assieme Gancio Chiu

151471752
215A1025-403: RNCC: 3 | RNVC: 2

6 Oct 1997

5340-15-231-7547
Lucchetto Mm.30

152317547
100.30: RNCC: 3 | RNVC: 2

19 Jul 2007

5340-15-189-4723
Dust And Moisture Seal Boot

151894723
30.20.03323: RNCC: 3 | RNVC: 2

25 Feb 2010

5340-15-066-2445
Dust And Moisture Seal Protective Cap

150662445
0M05043000: RNCC: 3 | RNVC: 2

3 Feb 1986

5340-15-120-0867
Double Angle Bracket

151200867
60165719: RNCC: 3 | RNVC: 2

19 Dec 1994

5340-15-062-6955
Dust And Moisture Seal Protective Plug

150626955
4585000404: RNCC: 3 | RNVC: 2
9986766: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-149-2973
Dust And Moisture Seal Protective Cap-Plug

151492973
4882704: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-217-5387
Testarmadio 10 Cp

152175387
TESTARMADIO10CP: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-176-4422
Padlock

151764422
VIRO: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-101-7831
Fascetta Speciale

151017831
SC32674.76S: RNCC: 3 | RNVC: 2

21 Jul 1987

5340-15-187-2149
Squadretta

151872149
157635134: RNCC: 3 | RNVC: 2
(241)A0199157635134: RNCC: 5 | RNVC: 2

25 Feb 2009

5340-15-206-9000
Cono In Grafite Da

152069000
09903700: RNCC: 3 | RNVC: 2
(241)A394409903700: RNCC: 5 | RNVC: 2

25 Jul 2012

5340-15-065-4239
Resilient Mount

150654239
900.13.08.0170: RNCC: 3 | RNVC: 2
5970437: RNCC: 5 | RNVC: 2
5970437: RNCC: 5 | RNVC: 9

24 Oct 1983

5340-15-120-0745
Corrosion Preventive Anode

151200745
1Q 700114: RNCC: 3 | RNVC: 2

16 Dec 1994

5340-15-154-0302
Dust And Moisture Seal Protective Plug

151540302
0-116335: RNCC: 3 | RNVC: 2
(241)A39630-116335: RNCC: 5 | RNVC: 2
1PA39630-116335: RNCC: 5 | RNVC: 2
093192920: RNCC: 5 | RNVC: 2

15 Mar 2001

5340-15-233-4784
Ruota Con Cuscinett

152334784
FX25/NDX/D1: RNCC: 3 | RNVC: 2
534015E024597: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-147-9976
Base Dentata

151479976
129-0640-86-120: RNCC: 3 | RNVC: 2

4 Jun 1998

5340-15-220-0458
Pann.Medio 2400Hx57

152200458
S1-64: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-206-5888
Utility Resilient Mount

152065888
TS MARE50/AS: RNCC: 3 | RNVC: 2
(241)A3290TS MARE50/AS: RNCC: 5 | RNVC: 2

26 Jun 2012

Load More Results