What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 47 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 47 of 72

5340-15-194-4684
Botole Ispezione

151944684
20.204.00: RNCC: 3 | RNVC: 2
(241)A492820.204.00: RNCC: 5 | RNVC: 2

18 Nov 2010

5340-15-057-4112
Electrical-Me Post

150574112
770516E: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-190-2226
Giunto

151902226
2953-450: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-209-3959
Cerniera Mm9

152093959
CERNIERAMM9: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-005-1539
Clip1. (Mechanical)

150051539
252A10041200: RNCC: 3 | RNVC: 2

9 Dec 2013

5340-15-193-5099
Clip

151935099
4113T34P03: RNCC: 3 | RNVC: 2
(241)A34604113T34P03: RNCC: 5 | RNVC: 2

26 May 2010

5340-15-122-3547
Control Rod

151223547
D1403084: RNCC: 3 | RNVC: 2

8 Jun 2000

5340-15-105-8489
Maniglia Ribaltabil

151058489
24031: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-103-1957
Access Door

151031957
DE013.13.385: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-144-8948
Cerniera

151448948
60002: RNCC: 3 | RNVC: 2
93194656: RNCC: 5 | RNVC: 1
60002: RNCC: 5 | RNVC: 2

10 Feb 1997

5340-15-204-3455
Corrosion Preventive Anode

152043455
3031431708P: RNCC: 3 | RNVC: 2
(241)ACA643031431708P: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-120-6880
Piastra Collegament

151206880
D0471337: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-158-6169
Speciale Occhiello

151586169
122513110: RNCC: 3 | RNVC: 2

10 Mar 2004

5340-15-178-7838
Shock Mount Pad

151787838
037153: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-074-4040
Turnbuckle

150744040
2A36UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-137-1057
Fascetta

151371057
72752: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-112-8103
Control Rod

151128103
483614: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-005-5994
Poker

150055994
0P030: RNCC: 3 | RNVC: 2
OP 030: RNCC: 5 | RNVC: 2
OP 030: RNCC: 5 | RNVC: 2

21 Apr 1979

5340-15-206-3537
Angle Bracket

152063537
50040 2750: RNCC: 3 | RNVC: 2

4 Jun 2012

5340-15-118-9885
Helical Compression Spring Seat

151189885
75207963: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-170-6116
Dust And Moisture Seal Protective Cap

151706116
FK0C90REP03: RNCC: 3 | RNVC: 2
CAE00259: RNCC: 5 | RNVC: 2

2 Apr 2003

5340-15-156-3332
Half Rings Assy

151563332
(241)A3460CBD71224G01: RNCC: 3 | RNVC: 2
CBD71224G01: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-15-162-0173
Cover

151620173
E2021.0000: RNCC: 5 | RNVC: 2
E2021.0000: RNCC: 5 | RNVC: 9

15 Nov 2000

5340-15-117-2586
Anchor Strap

151172586
132506605: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-15-156-3579
Dust Protective Cap

151563579
(241)A3460CBD71073P01: RNCC: 3 | RNVC: 2
CBD71073P01: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-192-9665
Braccio Pieghevole

151929665
PK/ARM2.1932: RNCC: 3 | RNVC: 2
(241)A3028PK/ARM2.1932: RNCC: 5 | RNVC: 2

30 Mar 2010

5340-15-100-5839
Pattino Laterale

151005839
DOA0119717: RNCC: 3 | RNVC: 2

7 Mar 1994

5340-15-112-8613
Headless Grooved Rod

151128613
471832: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-175-0441
Fixing System

151750441
16222: RNCC: 3 | RNVC: 2

29 Dec 2003

5340-15-205-3111
Helical Compression Spring Seat

152053111
5VO8105000: RNCC: 3 | RNVC: 2

2 Mar 2012

5340-15-170-7490
Protection Screen B

151707490
8500626402: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-166-4853
Piastrina Zincata X

151664853
035418545: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-064-3754
Helical Compression Spring Retainer

150643754
42033949: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-152-7242
Presa Gancio

151527242
80568: RNCC: 3 | RNVC: 2
(241)A333480568: RNCC: 4 | RNVC: 1
9056T8: RNCC: 5 | RNVC: 2

18 Oct 2000

5340-15-053-7311
Staffa

150537311
523545A: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-153-6393
Semicerniera

151536393
121107263: RNCC: 1 | RNVC: 3

20 Feb 2001

5340-15-064-6413
Electrical-Me Post

150646413
01-245-E-299: RNCC: 3 | RNVC: 2

24 Jun 1984

5340-15-120-0561
Electrical-Me Post

151200561
2-039-040: RNCC: 3 | RNVC: 2

14 Jun 1995

5340-15-154-0417
Helical Compression Spring Seat

151540417
4103T723: RNCC: 3 | RNVC: 2

15 Mar 2001

5340-15-178-9203
Collecteur D'huile

151789203
SO012MD001AA00: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-15-106-0049
Piastra Bloccaggio

151060049
2054967: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-121-5659
Engine Accessory Bracket

151215659
1R 500446: RNCC: 3 | RNVC: 2
1R 500446: RNCC: 5 | RNVC: 9

13 Sep 1996

5340-15-111-8368
Double Angle Bracket

151118368
67360340: RNCC: 3 | RNVC: 2
8193452: RNCC: 5 | RNVC: 2

14 Jun 1988

5340-15-198-4202
Threaded End Tensioning Tie Rod

151984202
122649222: RNCC: 3 | RNVC: 2

27 Sep 2004

5340-15-160-7105
Targa Bronzo

151607105
F190071661: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-122-5802
Anchor Strap

151225802
9265.153: RNCC: 3 | RNVC: 2

10 Sep 1996

5340-15-149-3441
Protezione Braccio

151493441
60169438: RNCC: 3 | RNVC: 2

2 Feb 1999

5340-15-194-3932
Seal Housing

151943932
160101270: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-15-220-8527
Tasselli Da 8 Pezzi

152208527
TASSELLI8: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-220-8811
Spiralina Zingata X

152208811
SPIZNP: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-103-5923
Rim Clen Clamp (1)

151035923
RS406246A: RNCC: 3 | RNVC: 2

10 Apr 1989

5340-15-105-6012
Staffa A Gomito

151056012
978814: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-121-9013
Supporto Lavorato C

151219013
142514939: RNCC: 3 | RNVC: 2

19 Mar 1996

5340-15-006-2555
Guida Speciale

150062555
0-33764: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-001-1457
Key Blank

150011457
YA 7: RNCC: 3 | RNVC: 2

31 May 2013

5340-15-005-2315
Helical Compression Spring Seat

150052315
565068623000: RNCC: 2 | RNVC: 3
5068623: RNCC: 3 | RNVC: 2

16 Sep 1980

5340-15-000-9367
Dust And Moisture Seal Protective Plug

150009367
A993A024A: RNCC: 3 | RNVC: 2

2 May 2013

5340-15-153-5215
Access Door

151535215
142053900: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-055-6668
Riparo Cavi Batteri

150556668
543716: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-187-8122
Motor Flusher

151878122
43797: RNCC: 3 | RNVC: 2

7 May 2009

5340-15-074-4247
Turnbuckle

150744247
2D6UNI2019A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-147-8771
Plaquette

151478771
49230: RNCC: 3 | RNVC: 2

18 May 1998

5340-15-112-3550
Resilient Mount

151123550
60143420: RNCC: 3 | RNVC: 2
60143420: RNCC: 5 | RNVC: 2
(241)AF90860143420: RNCC: 5 | RNVC: 2

25 Sep 1998

5340-15-127-3215
Staffetta Fissag.Fl

151273215
736263: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-009-5835
Cover Plate Access

150095835
75449311: RNCC: 3 | RNVC: 2
9983212: RNCC: 5 | RNVC: 2
75449311: RNCC: 5 | RNVC: 9

22 Sep 1979

5340-15-163-1719
Clip

151631719
1309950080: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-201-1484
Nut And Bolt Retainer

152011484
UA22009A14P: RNCC: 3 | RNVC: 2
(241)A2142UA22009A14P: RNCC: 5 | RNVC: 2

11 Jun 2006

5340-15-150-3884
Dust And Moisture Seal Protective Cap

151503884
M254: RNCC: 3 | RNVC: 2

2 Dec 1999

5340-15-199-4934
Helical Compression Spring Seat

151994934
312791F01: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-15-100-7008
Anello Di Frizione

151007008
808-74611-18: RNCC: 3 | RNVC: 2

1 Jul 1987

5340-15-105-6013
Staffa A Gomito

151056013
701522/1: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-236-5828
Collare Fissaggio C

152365828
CLE60: RNCC: 3 | RNVC: 2

27 Aug 2007

5340-15-207-2093
Utility Resilient Mount

152072093
9443439: RNCC: 3 | RNVC: 2

24 Sep 2012

5340-15-050-4878
Fascetta

150504878
7157-06A: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-218-4519
Fischer Ad Ancora D

152184519
KDH4: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-119-0997
Helical Compression Spring Seat

151190997
73063488: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-119-1237
Dust And Moisture Seal Protective Cap-Plug

151191237
73121060: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-120-6843
Supporto Sinistro M

151206843
D0486599: RNCC: 3 | RNVC: 2

1 May 1996

5340-15-152-8089
Coperchio Indicator

151528089
P131215: RNCC: 3 | RNVC: 2

27 Oct 2000

5340-15-207-8728
Utility Resilient Mount

152078728
504379292: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-153-8907
Engine Accessory Bracket

151538907
69321: RNCC: 3 | RNVC: 2

9 Mar 2001

5340-15-071-0678
Dust And Moisture Seal Protective Plug

150710678
VC100PT18: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-066-7586
Molla

150667586
466341: RNCC: 2 | RNVC: 2
D0466341: RNCC: 3 | RNVC: 2

1 Apr 1998

5340-15-201-8848
Staffa Fissaggio Fa

152018848
STFIN35R: RNCC: 3 | RNVC: 2
(241)A3804STFIN35R: RNCC: 5 | RNVC: 2

7 Jan 2007

5340-15-169-6655
Lucchetto S&G

151696655
F72017685: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-108-6436
Tassello Elastico

151086436
93919815: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-000-6760
Support

150006760
89160F1: RNCC: 3 | RNVC: 2

28 Mar 2013

5340-15-101-8914
Turnbuckle Body

151018914
1P250059: RNCC: 3 | RNVC: 2
1P250059: RNCC: 5 | RNVC: 9

25 Nov 1992

5340-15-103-2020
Disco Parapolvere

151032020
DE160.02.083: RNCC: 3 | RNVC: 2
(241)A5015DE160.02.083: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-179-2929
Open Spring

151792929
3ANE523032: RNCC: 3 | RNVC: 2

16 Oct 2006

5340-15-213-7204
Tassello Di Plastic

152137204
TASSELLO10MM: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-120-0244
Dust And Moisture Seal Protective Cap-Plug

151200244
73014533: RNCC: 3 | RNVC: 2

5 Dec 1994

5340-15-219-8633
Base Adesiva Per Fa

152198633
385-3885: RNCC: 5 | RNVC: 3
534015E143185: RNCC: 5 | RNVC: 9

16 Nov 2005

5340-15-117-0696
Hook Fastening

151170696
881.3616.003: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-166-4901
Supporto Per Anelli

151664901
7896G12X25: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-206-8518
Co-Ordinating Arm

152068518
21310101: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-166-5184
Sistema Di Aggancio

151665184
TP500080202C060101: RNCC: 1 | RNVC: 2
TP500080202C060101: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-127-2855
Staffetta

151272855
687107: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-119-3476
Piastra Per Passagg

151193476
992114284L: RNCC: 3 | RNVC: 2

14 Jul 1994

5340-15-151-4586
Fissaggio Scalpello

151514586
UOHF0170000: RNCC: 3 | RNVC: 2

29 May 2000

5340-15-194-5215
Up Bracket Assembly

151945215
18HJ04543212S01-404: RNCC: 3 | RNVC: 2
(241)A001918HJ04543212S01-404: RNCC: 5 | RNVC: 2

30 Nov 2010

5340-15-152-3492
Staffa

151523492
0-153495: RNCC: 3 | RNVC: 2

4 Sep 2000

5340-15-166-4779
Tassello Di N Lon D

151664779
0204: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-051-6708
Turnbuckle

150516708
2A8UNI2018X15CN1808: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-215-0551
Tassello

152150551
01980: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-231-1639
Tampone

152311639
7631306: RNCC: 3 | RNVC: 2
534015E093425: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-178-1060
Retaining Clamp Assembly

151781060
FAVT04: RNCC: 3 | RNVC: 2

14 Feb 2005

5340-15-187-4221
Manual Control Handle

151874221
76009491: RNCC: 3 | RNVC: 2

30 Mar 2009

5340-15-149-2987
Dust And Moisture Seal Protective Plug

151492987
4882777: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-001-6041
Nut And Bolt Retainer

150016041
8053075: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-198-5074
Manual Control Lever

151985074
030206: RNCC: 3 | RNVC: 2
(241)A3593030206: RNCC: 5 | RNVC: 2

7 Oct 2004

5340-15-062-9049
Resilient Mount

150629049
0-55483: RNCC: 3 | RNVC: 2

28 Aug 1981

5340-15-058-6129
Rubber Bumper

150586129
C240977C: RNCC: 5 | RNVC: 2
C240977C: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-219-8598
Tassello Hsl-3G M20

152198598
371805/3: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-130-2047
Molla

151302047
1-01248-75: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-153-2934
Headless Straight Rod

151532934
122510271: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-15-121-2173
Dust And Moisture Seal Protective Plug Set

151212173
299706573Y: RNCC: 3 | RNVC: 2

25 Jan 1996

5340-15-184-5017
Spacer Assy

151845017
2101-7225: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-056-3943
Key Blank

150563943
KP19S: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-188-2649
Utility Resilient Mount

151882649
1P 609625: RNCC: 3 | RNVC: 2

31 Aug 2009

5340-15-105-8170
Sostegno Elastico

151058170
76412: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-105-8183
Sostegno Elastico

151058183
76712: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-060-8057
Handwheel

150608057
000200063050: RNCC: 5 | RNVC: 2
000200063050: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-217-6877
Lama Bimetallica Al

152176877
302014000001: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-126-4675
Fermaglio

151264675
XS1659: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-141-3622
Supporto Sensore

151413622
450905-3449: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-114-7163
Control Rod

151147163
03-619-B-43: RNCC: 1 | RNVC: 3
52992: RNCC: 3 | RNVC: 2

29 Jul 1992

5340-15-189-5351
Fascetta

151895351
STSTG001-20-29: RNCC: 3 | RNVC: 2

26 Feb 2010

5340-15-051-9848
Resilient Mount

150519848
7723819: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-139-7102
Chiavistello

151397102
A.0133100: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-005-6868
Scodellino Speciale

150056868
0-33680: RNCC: 3 | RNVC: 2

12 Aug 1979

5340-15-218-2325
Catenaccio A Saldar

152182325
74CM40: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-020-2100
Raccordo Tirante Le

150202100
01-231Q55: RNCC: 3 | RNVC: 2
55.35.047.A: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-166-5090
Cap

151665090
60922: RNCC: 1 | RNVC: 2
60922: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-007-8100
Serratura Completa

150078100
4256968: RNCC: 3 | RNVC: 2
04256968: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-162-0569
Spacer

151620569
RS413089: RNCC: 3 | RNVC: 2
8012149B00: RNCC: 5 | RNVC: 2

21 Dec 2000

5340-15-206-9675
Collare

152069675
46307163: RNCC: 3 | RNVC: 2
(241)A293046307163: RNCC: 5 | RNVC: 2

2 Aug 2012

5340-15-178-9885
Support

151789885
RS 301 802 A: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-121-1487
Turnbuckle

151211487
F-FM24: RNCC: 3 | RNVC: 2
52002024: RNCC: 5 | RNVC: 2

10 Apr 1996

5340-15-230-5089
Fermo

152305089
86849 1: RNCC: 3 | RNVC: 2
534015E132196: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-155-2950
Attacco Superiore C

151552950
60179800: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-15-139-7979
Catenella Completa

151397979
1001707: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-178-1681
Lock

151781681
7445212: RNCC: 3 | RNVC: 2

11 Mar 2005

5340-15-189-0162
Strap

151890162
03A.RFL18050: RNCC: 3 | RNVC: 2
(241)A031103A.RFL18050: RNCC: 5 | RNVC: 2

15 Jan 2010

5340-15-169-0635
Lucchetto Com

151690635
F72005928: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-121-0913
Corrosion Preventive Anode

151210913
222622B: RNCC: 3 | RNVC: 2

22 Jan 1996

5340-15-179-9382
Panel

151799382
60198970: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-103-5588
Resilient Mount

151035588
23717: RNCC: 3 | RNVC: 2

17 Dec 1988

5340-15-187-9301
Dust And Moisture Seal Protective Cap-Plug

151879301
V4201843: RNCC: 3 | RNVC: 2
(241)A4447V4201843: RNCC: 5 | RNVC: 2

1 Jun 2009

5340-15-156-3687
Deoiler Plug

151563687
(241)A3460CBD71335G01: RNCC: 3 | RNVC: 2
CBD71335G01: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-005-6610
Cover Plate Access

150056610
4163972: RNCC: 3 | RNVC: 2
4163972: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-214-0907
Porta Inserto Magne

152140907
F3314M: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-002-5544
Screen Door Hardware Set

150025544
42563229: RNCC: 3 | RNVC: 2

3 Sep 2013

5340-15-149-3136
Dust And Moisture Seal Protective Cap-Plug

151493136
4886043: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-205-1990
Pyromete Protection

152051990
CBD71620G01: RNCC: 3 | RNVC: 2
(241)A3460CBD71620G01: RNCC: 5 | RNVC: 2

24 Feb 2012

5340-15-062-5277
Cover Plate Access

150625277
1113-17-906: RNCC: 3 | RNVC: 2

2 Dec 1981

5340-15-156-5941
Sealing Plug Assembly

151565941
35010030A: RNCC: 3 | RNVC: 2

28 Feb 2003

5340-15-200-4860
Chiusura A Doppia A

152004860
023390049003: RNCC: 3 | RNVC: 2
(241)A8539023390049003: RNCC: 5 | RNVC: 2

25 Jan 2006

5340-15-182-4791
Staffa

151824791
8969100: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-003-4752
Forcella Giunto

150034752
894416: RNCC: 3 | RNVC: 2
894416: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-127-5310
Staffa Sostegno Tub

151275310
877207: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-142-4492
Ammortizzatore

151424492
15638-72: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-134-5979
Distanziale

151345979
4647541: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-211-6311
Fermo Di Chiusura A

152116311
386751: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-054-3740
Guarnitura

150543740
096763: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-155-4911
Extractor Assy

151554911
CBD71127G01: RNCC: 3 | RNVC: 2

28 Mar 2002

5340-15-065-1892
Resilient Mount

150651892
37M003P101: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-114-3153
Pomello

151143153
CF415070: RNCC: 3 | RNVC: 2

4 Jun 1992

5340-15-120-9288
Semcerniera

151209288
113A6012-754: RNCC: 3 | RNVC: 2

5 Sep 1995

5340-15-051-4215
Staffa

150514215
4548602: RNCC: 3 | RNVC: 2
4548602: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-120-6892
Disco Laterale Moto

151206892
D0471275: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-115-4418
Bonding Braid

151154418
TF2: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-103-1965
Golfare Di Sollevam

151031965
DE013.13.416: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-202-7220
Snap Hook

152027220
EI 3202A: RNCC: 3 | RNVC: 2
(241)AE591EI3202A: RNCC: 5 | RNVC: 2

27 Jun 2007

5340-15-142-3753
Serratura

151423753
480SS110N001: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-068-2318
Anchor Strap

150682318
W011306: RNCC: 3 | RNVC: 2
(7001)5340150682318: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-194-3930
Stage Box

151943930
152801060: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-15-112-8370
Coperchios

151128370
471075: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-186-8350
Lever

151868350
3470: RNCC: 3 | RNVC: 2

5 Jan 2009

5340-15-122-2665
Manual Control Handle

151222665
800039628: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-162-9590
Dust And Moisture Seal Protective Cap

151629590
1984D: RNCC: 3 | RNVC: 2
1984D: RNCC: 5 | RNVC: 9

9 Apr 2002

5340-15-118-7197
Nut And Bolt Locking Plate

151187197
73131725: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-101-9100
Coperchio Accesso

151019100
1Q241835: RNCC: 3 | RNVC: 2
1Q241835: RNCC: 5 | RNVC: 9

25 Nov 1992

5340-15-231-1121
Chiudiporta Con Fer

152311121
60140-02: RNCC: 3 | RNVC: 2
534015E078732: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-127-3327
Staffa Fissaggio Ca

151273327
742838: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-183-3885
Zanzariera In Allum

151833885
ZANZARIERACM120: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-178-2887
Fastener Kit

151782887
KB11101: RNCC: 3 | RNVC: 2

29 Apr 2005

5340-15-217-4758
Lucchetto Con Doppi

152174758
364-6249: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-114-7585
Stop Bush

151147585
01TL20470: RNCC: 3 | RNVC: 2

4 Aug 1992

5340-15-149-5684
Nottolino Antigiro

151495684
169520P1: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-155-4942
Plate

151554942
CBD71130P03: RNCC: 3 | RNVC: 2

28 Mar 2002

5340-15-006-2391
Prolunga Speciale

150062391
0-33600: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-176-6147
Fascetta Meb Mm12 9

151766147
MEB12MM90X110: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-103-4582
Resilient Mount

151034582
81402: RNCC: 3 | RNVC: 2
81402: RNCC: 5 | RNVC: 9

12 Apr 1988

5340-15-115-2335
Rod

151152335
518023560: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-233-7141
Staffa Di Fissaggio

152337141
11.100.150: RNCC: 3 | RNVC: 2
534015E021841: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-204-4384
Rullo Tenditore

152044384
24810: RNCC: 3 | RNVC: 2
(241)A293024810: RNCC: 5 | RNVC: 2

7 Nov 2011

5340-15-153-8181
Manual Control Lever

151538181
16000A140140: RNCC: 3 | RNVC: 2
16000A140140: RNCC: 5 | RNVC: 9

1 Mar 2001

5340-15-101-7846
Fascetta Speciale

151017846
SC32674.84S: RNCC: 3 | RNVC: 2

21 Jul 1987

5340-15-139-7813
Chiavistello

151397813
1000517: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-112-8473
Pastigliaconc

151128473
D0472197: RNCC: 3 | RNVC: 2
472197: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-177-7147
Spheric Terminal

151777147
89300104: RNCC: 3 | RNVC: 2

4 Jun 2004

5340-15-113-2485
Staffacomplessivo

151132485
345A4274-401: RNCC: 3 | RNVC: 2

11 Apr 1991

5340-15-104-4344
Testa Tira Forcella

151044344
1366408: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-009-9006
Cover Plate Access

150099006
1236-31-144: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-153-5972
Base (1) Per Sosteg

151535972
142018126: RNCC: 3 | RNVC: 2

16 Feb 2001

5340-15-193-7131
Chain

151937131
SSSL04: RNCC: 3 | RNVC: 2

2 Jul 2010

5340-15-127-5353
Anello

151275353
878947: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-192-2379
Copertina Magnetica

151922379
COPERTINAMAGNETICA: RNCC: 3 | RNVC: 2

2 Mar 2010

5340-15-147-5756
Steun

151475756
982150011: RNCC: 3 | RNVC: 2

30 Dec 1997

5340-15-166-5047
Rod And Ass

151665047
232A1980403: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-125-6657
Clamp

151256657
CE14387G10: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-060-4102
Electrical-Me Post

150604102
732036W: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-006-6735
Fastener

150066735
4D8109M: RNCC: 3 | RNVC: 2

24 Nov 1979

5340-15-156-2011
Base

151562011
(241)A3460CBD71146G01: RNCC: 3 | RNVC: 2
CBD71146G01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-127-5738
Molla Leva Comando

151275738
966006: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-166-5189
Lucchetto Ad Arco L

151665189
32438: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-125-1092
Lucchetto Da Mm70 F

151251092
104: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-152-3493
Staffa

151523493
0-153496: RNCC: 3 | RNVC: 2

4 Sep 2000

5340-15-007-0929
Tappo Speciale

150070929
0-21756: RNCC: 3 | RNVC: 2

29 Jun 1979

5340-15-155-4913
Press Tool Assy

151554913
CBD71128G01: RNCC: 3 | RNVC: 2

28 Mar 2002

5340-15-135-9858
Ammortizzatore

151359858
786001: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-055-6639
Spessore Per Rubine

150556639
543291: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-126-4491
Molla

151264491
14560-17: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-026-5346

5340-15-115-7079
Braccio Per Leva Sp

151157079
468394: RNCC: 3 | RNVC: 2
D0468394: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-175-9683
Tendicinghia Altern

151759683
61315818: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-051-9222
Chiave Per Serratur

150519222
DISNP17TIP01DESTRA: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-155-0272
Access Door

151550272
1PA9172500221457000: RNCC: 3 | RNVC: 2
500221457000: RNCC: 3 | RNVC: 2

8 Jan 2002

5340-15-074-4075
Turnbuckle

150744075
2B8UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-111-3960
Supporto

151113960
345A3345-001: RNCC: 3 | RNVC: 2

27 Oct 1990

5340-15-107-1868
Spacer

151071868
C7259-W9-B1: RNCC: 3 | RNVC: 2
C7259W9B1: RNCC: 3 | RNVC: 2

10 Apr 1989

5340-15-153-4027
Elettro-Me Raccordo

151534027
5137-402-03: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-102-5906
Helical Compression Spring Retainer

151025906
69901: RNCC: 3 | RNVC: 2

4 Mar 1993

5340-15-150-6355
Assieme Coperchio

151506355
30601-41400: RNCC: 3 | RNVC: 2

15 Dec 1999

5340-15-117-5901
Resilient Mount

151175901
VZA/D/AV/60: RNCC: 3 | RNVC: 2

4 Nov 1994

5340-15-001-5994
Mechanic Equipment Hardware Kit

150015994
42566937: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-120-6927
Sede Guida Onda Per

151206927
D0468952: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-194-1967
Angle Bracket

151941967
037228: RNCC: 3 | RNVC: 2
037228: RNCC: 5 | RNVC: 2

1 Oct 2010

5340-15-214-6272
Targhetta Portachia

152146272
TARGHETTACHIAVI: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-141-4418
Anodo

151414418
W015555: RNCC: 3 | RNVC: 2
(7001)5340151414418: RNCC: 5 | RNVC: 2

9 Jun 1997

5340-15-063-8892
Helical Compression Spring Seat

150638892
815535: RNCC: 3 | RNVC: 2

15 Sep 1982

5340-15-118-0472
Coperchio In Acciai

151180472
D0488105: RNCC: 3 | RNVC: 2

18 Nov 1994

5340-15-209-4752
Catena Genovese

152094752
CATENA: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-193-5756
Staffa

151935756
STAFFAREGGITUBODIAM16: RNCC: 3 | RNVC: 2
(241)AD841STAFFAREGGITUBODIAM16: RNCC: 5 | RNVC: 2

15 Jun 2010

5340-15-219-8328
Turnbuckle

152198328
587744: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-119-6338
Control Rod

151196338
DOR0101511: RNCC: 3 | RNVC: 2

25 Nov 1994

5340-15-232-3309
Supporto

152323309
59261392: RNCC: 3 | RNVC: 2
534015E131203: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-236-9699
Pozzetto A Molla In

152369699
44672-8: RNCC: 3 | RNVC: 2
534015E092549: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-144-9574
Safety Hook

151449574
60180311: RNCC: 3 | RNVC: 2
60180311: RNCC: 5 | RNVC: 2

24 Feb 1997

5340-15-002-1676
Lock Bar

150021676
5801361620: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-231-1124
Lucchetto Mm.50

152311124
21011-50: RNCC: 3 | RNVC: 2
534015E091838: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-219-5420
Chiave Per Apertura

152195420
1X5-SFERA: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-115-2712
Sector Gear

151152712
518391020: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-107-5347
Resilient Mount

151075347
SR 2210: RNCC: 3 | RNVC: 2

22 Mar 1988

5340-15-199-4763
Resilient Mount

151994763
1R 340095: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-15-215-7864
Maniglione Antipani

152157864
59143: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-166-5237
Lee Plug

151665237
PLGM0450010: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-191-4802
Bracket

151914802
547346: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-211-8768
Montante In Allumin

152118768
NB0030: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-108-2839
Control Rod

151082839
478142: RNCC: 3 | RNVC: 2
D0478142: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-147-5796
T-Fitting

151475796
98RV700: RNCC: 3 | RNVC: 2

30 Dec 1997

5340-15-186-8245
Key Blank

151868245
LF4R: RNCC: 3 | RNVC: 2

5 Jan 2009

5340-15-126-4932
Molla

151264932
TTA67: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-156-2139
Support

151562139
(241)A3460CBD71174P02: RNCC: 3 | RNVC: 2
CBD71174P02: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-213-8777
Ruota Con Supporto2

152138777
388A: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-115-7169
Sfera Valvola Compl

151157169
D1401093: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-15-115-7058
Coperchio

151157058
D0470413: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-138-2891
Padlock

151382891
303: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-175-0382
Crank

151750382
14141: RNCC: 3 | RNVC: 2

29 Dec 2003

5340-15-193-1894
Turnbuckle

151931894
90 46 13 58: RNCC: 3 | RNVC: 2

20 Apr 2010

5340-15-195-7056
Dust And Moisture Seal Protective Cap

151957056
1586058A01: RNCC: 3 | RNVC: 2

27 Apr 2011

5340-15-001-5690
Manual Control Lever

150015690
ZSLMSHR10000: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-195-9098
Manico

151959098
EL37101: RNCC: 3 | RNVC: 2
(241)A0774EL37101: RNCC: 5 | RNVC: 2

25 May 2011

5340-15-187-2293
Piastrino

151872293
A5417: RNCC: 3 | RNVC: 2
(241)A7904A5417: RNCC: 5 | RNVC: 2

26 Feb 2009

5340-15-166-5241
Sleeve

151665241
HELSYN250SLP10X050: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-152-3512
Maniglia

151523512
0-163664: RNCC: 3 | RNVC: 2

4 Sep 2000

5340-15-053-9858
Occhiello A Vela

150539858
03400-1: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-153-7771
Morsetto (1) A Serr

151537771
06100A133880: RNCC: 5 | RNVC: 2
06100A133880: RNCC: 5 | RNVC: 9

28 Feb 2001

5340-15-152-4735
Bracket

151524735
NN78524P01: RNCC: 3 | RNVC: 2

18 Sep 2000

5340-15-122-1969
Support Plate

151221969
982150020: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-067-8749
Tiranti Fissaggio G

150678749
53.091: RNCC: 3 | RNVC: 2
53.091: RNCC: 3 | RNVC: 2

31 May 1986

5340-15-181-7991
Frontale Zincato 1

151817991
704601S: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-105-8952
Tirante A Teste Fil

151058952
4-551: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-231-6688
Twist-Lock Dx

152316688
0-122678: RNCC: 3 | RNVC: 2
534015E158159: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-197-8654
Semicerniera

151978654
N523G5166202: RNCC: 3 | RNVC: 2
N523G5166201: RNCC: 5 | RNVC: 9

21 May 2004

5340-15-051-4267
Scodellino

150514267
4535608: RNCC: 3 | RNVC: 2
4535608: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-068-3324
Staffa Di Supporto

150683324
OD136K005: RNCC: 3 | RNVC: 2

27 Oct 1985

5340-15-001-6521
Molla

150016521
174016043: RNCC: 3 | RNVC: 2
174016043: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-169-2196
Padlock

151692196
F72009187: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-202-4544
Terminale

152024544
02240: RNCC: 3 | RNVC: 2
(241)A553602240: RNCC: 5 | RNVC: 2

26 Mar 2007

5340-15-169-2873
Lucchetto C.

151692873
F72010246: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-105-5989
Staffa A Gomito

151055989
2105478: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-009-0656
Support

150090656
1382947: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-001-8323
Bumper

150018323
5949790840: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-121-0914
Corrosion Preventive Anode

151210914
222622A: RNCC: 3 | RNVC: 2

22 Jan 1996

5340-15-132-7988
Anello Sollevamento

151327988
1032D: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-213-8369
Elettroserratura

152138369
023133: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-209-3018
Lama Al Videa Da 42

152093018
42DENTIFORO30DIAM25: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-141-4407
Anodo

151414407
W012039: RNCC: 3 | RNVC: 2
(7001)5340151414407: RNCC: 5 | RNVC: 2

9 Jun 1997

5340-15-194-4644
Corrosion Preventive Anode

151944644
43.315.20: RNCC: 3 | RNVC: 2
(241)A492843.315.20: RNCC: 5 | RNVC: 2

18 Nov 2010

5340-15-122-9474
Spina Rapida

151229474
NAS1338C3C24D: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-198-3279
Corrosion Preventive Anode

151983279
DN80DC89: RNCC: 3 | RNVC: 2

22 Sep 2004

5340-15-203-9618
Angle Bracket

152039618
21491046: RNCC: 3 | RNVC: 2
(241)A486721491046: RNCC: 5 | RNVC: 2

29 Jul 2011

5340-15-118-0354
Piattello Per Valvo

151180354
D0469368: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-15-118-4613
Resilient Mount

151184613
AVAUD908L: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-15-213-8079
Elettroserratura Pe

152138079
16225-30: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-157-4207
Pattino Di Metallo

151574207
21505708: RNCC: 3 | RNVC: 2

14 Jul 2003

5340-15-181-0570
Engine Accessory Bracket

151810570
070848: RNCC: 3 | RNVC: 2
(241)A3593070848: RNCC: 5 | RNVC: 2

10 Oct 2008

5340-15-142-8882
Dust And Moisture Seal Boot

151428882
PR35: RNCC: 3 | RNVC: 2
GR35: RNCC: 5 | RNVC: 2

22 Oct 1996

5340-15-118-9988
Rigid Surface Mechanical Patch

151189988
9817973: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-110-8413
Nut And Bolt Locking Plate

151108413
773204: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-104-8885
Fissaggio Gaffetta

151048885
24077: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-129-2745
Bussola

151292745
119609: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-020-1946
Vite Doppia

150201946
01-231N14: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-118-0305
Gruppo Leva Con Imp

151180305
D0387994: RNCC: 3 | RNVC: 2

14 Nov 1994

5340-15-103-1857
Spec Piastra Filtri

151031857
DE160.01.045: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-166-4857
Montante Centrale '

151664857
03579225A: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-055-6542
Squadretta Destra

150556542
545085: RNCC: 3 | RNVC: 2

10 Apr 1972

5340-15-007-6959
Cover Plate Access

150076959
1141-39-901: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-101-7843
Fascetta Speciale

151017843
SC32674.82S: RNCC: 3 | RNVC: 2

21 Jul 1987

5340-15-008-1809
Cover Plate Access

150081809
60113972: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-120-6841
Coperchio Superiore

151206841
D0486618: RNCC: 3 | RNVC: 2

1 May 1996

5340-15-101-5397
Pannello Con Telaio

151015397
000200311150: RNCC: 5 | RNVC: 2
000200311150: RNCC: 5 | RNVC: 9

17 Oct 1987

5340-15-115-7113
Disco Metallico Spe

151157113
D1401168: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-154-3932
Shock Mount Pad

151543932
10015111: RNCC: 3 | RNVC: 2
(241)A977210015111: RNCC: 5 | RNVC: 2

22 May 2001

5340-15-134-5034
Staffetta

151345034
91600307: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-120-6947
Flangia Di Chiusura

151206947
D0467057: RNCC: 3 | RNVC: 2

1 May 1996

5340-15-181-6697
Cilindro Profilato

151816697
PC5000014: RNCC: 3 | RNVC: 2
PC5000014: RNCC: 5 | RNVC: 9

19 Dec 2008

5340-15-100-3295
Luggage Bumper

151003295
8269860: RNCC: 3 | RNVC: 2

27 Oct 1985

5340-15-203-4497
Attachment Assembly

152034497
N523G5457101: RNCC: 3 | RNVC: 2
(241)A0126N523G5457101: RNCC: 5 | RNVC: 2

3 Feb 2008

5340-15-209-5027
Fascetta Reggicavo

152095027
TY35M: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-201-0990
Headless Straight Rod

152010990
9705830145: RNCC: 3 | RNVC: 2
9705830145: RNCC: 3 | RNVC: 2
(241)AF7649705830145: RNCC: 5 | RNVC: 2

28 May 2006

5340-15-120-5040
Cavallotto Fissaggi

151205040
001864: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-15-166-5157
Fascetta Fermacavo

151665157
603306: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-162-0169
Cover

151620169
D7042.0000: RNCC: 5 | RNVC: 2
D7042.0000: RNCC: 5 | RNVC: 9

15 Nov 2000

5340-15-101-8474
Gomma Sp Cuscinetto

151018474
028200074100: RNCC: 5 | RNVC: 2
028200074100: RNCC: 5 | RNVC: 9

20 Jan 1988

5340-15-158-5746
Special Cavallotto

151585746
121210231: RNCC: 3 | RNVC: 2

9 Mar 2004

5340-15-052-8413
Manopola Pannello C

150528413
204-7700-82-1: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-189-6709
Tappo

151896709
41772159F: RNCC: 3 | RNVC: 2

26 Feb 2010

5340-15-054-2694
Boccola

150542694
50020289: RNCC: 3 | RNVC: 2
50020289: RNCC: 5 | RNVC: 9

4 Apr 1973

5340-15-112-8303
Controflangia

151128303
467113: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-103-0423
Resilient Mount

151030423
76002034: RNCC: 3 | RNVC: 2

21 Jun 1987

5340-15-112-8226
Bussolap

151128226
466399: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-054-3775
Catena Per Anello

150543775
333393: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-196-9907
Padlock

151969907
PN UAS 00037821: RNCC: 3 | RNVC: 2
5340F76032374: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-051-3806
Molla

150513806
9912808: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-232-1247
Paracolpi

152321247
9505385: RNCC: 3 | RNVC: 2
534015E117853: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-166-5263
Bobina Filo Armonic

151665263
998A15: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-118-0441
Blocchetto Cilindri

151180441
487148: RNCC: 3 | RNVC: 2
D0487148: RNCC: 3 | RNVC: 2

14 Dec 1994

5340-15-101-7455
Piastra Forata

151017455
P13: RNCC: 3 | RNVC: 2

4 Feb 1994

5340-15-156-3904
Bracket

151563904
(241)A3460CBD70765P02: RNCC: 3 | RNVC: 2
CBD70765P02: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-198-7908
Pipe Bracket

151987908
60188349: RNCC: 3 | RNVC: 2

17 Nov 2004

5340-15-166-4869
Piastrina Isolante

151664869
52X055P004: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-170-3930
Hardware Vary

151703930
76004031: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-192-6476
Inserto

151926476
UBS38K5: RNCC: 3 | RNVC: 2

26 Mar 2010

5340-15-196-9904
Padlock

151969904
PN UAS 00037679: RNCC: 3 | RNVC: 2
5340F76032252: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-112-8590
Busta

151128590
468295: RNCC: 3 | RNVC: 2
D0468295: RNCC: 3 | RNVC: 2

1 Apr 1998

5340-15-107-8582
Tassello Elastico

151078582
4747140: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-000-8392
Corrosion Preventive Anode

150008392
97400000290R: RNCC: 3 | RNVC: 2

11 Apr 2013

5340-15-126-5615
Cerniera

151265615
N3HW106: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-119-5427
Piastrina Metallica

151195427
D0485138: RNCC: 3 | RNVC: 2

24 Mar 1995

5340-15-139-7874
Collare Serraggio

151397874
1000940: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-203-5768
Filo In Perlon Conf

152035768
JS41C: RNCC: 3 | RNVC: 2
(241)AA393JS41C: RNCC: 5 | RNVC: 2

13 Jun 2011

5340-15-113-7517
Dust And Moisture Seal Protective Cap-Plug

151137517
1301726: RNCC: 3 | RNVC: 2

17 Feb 1992

5340-15-103-2291
Column Kit

151032291
7.275.341: RNCC: 3 | RNVC: 2

19 Jul 1988

5340-15-153-7672
Base (1) Per Sosteg

151537672
01831A101650: RNCC: 5 | RNVC: 2
T0064509: RNCC: 5 | RNVC: 2
01831A101650: RNCC: 5 | RNVC: 9

27 Feb 2001

5340-15-061-2339
Rim Clen Clamp (1)

150612339
000200028500: RNCC: 5 | RNVC: 2
1200096-156000004: RNCC: 5 | RNVC: 2
000200028500: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-144-9770
Pad

151449770
D1407858: RNCC: 3 | RNVC: 2

26 Feb 1997

5340-15-065-7209
Helical Compre Seat

150657209
500.3430.070: RNCC: 3 | RNVC: 2

4 Jun 1985

5340-15-209-0785
Tasselli Fischer Co

152090785
0451: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-108-8935
Control Rod

151088935
60121436: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-115-6078
Coperchio Scatola

151156078
D0469587: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-050-7613
Cerniera

150507613
204-8130-4-1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-136-2581
Tappo Livello E Sca

151362581
S00115000000: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-220-3540
Lucchetto A Combina

152203540
RS 411CC: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-114-6999
Aeromobile Flancia

151146999
24045-4: RNCC: 3 | RNVC: 2
24045-4: RNCC: 5 | RNVC: 9

24 Jul 1992

5340-15-109-8497
Assieme Supporto

151098497
210304/4: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-051-4673
Dust And Moisture Seal Protective Cap

150514673
PR10802: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-109-7389
Control Rod

151097389
8857453: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-136-2115
Staffa

151362115
4641551: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-127-4173
Chiusura Fi Pomello

151274173
1413-42-705: RNCC: 3 | RNVC: 2
1413-42-705: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-074-4375
Turnbuckle

150744375
2C22UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-213-5250
Lucchetto Mm40 Pote

152135250
2740: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-207-1966
Shackle Strap

152071966
R0085990: RNCC: 2 | RNVC: 2
(241)AG350R0085990: RNCC: 5 | RNVC: 2

20 Sep 2012

5340-15-003-9404
Stand Base

150039404
182701012: RNCC: 3 | RNVC: 2
(241)A0199182701012: RNCC: 5 | RNVC: 2

4 Dec 2013

5340-15-112-8191
Semianellodia

151128191
368646: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-074-4211
Turnbuckle

150744211
1C6UNI2019A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-212-0794
Catenaccio A Coda C

152120794
ART.27-CM40: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-166-5080
Shank

151665080
31357001: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-104-8911
Fissaggio Gaffetta

151048911
4597952: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-213-4550
Nastro Polipropilen

152134550
NASTROMM25: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-103-1605
Control Rod

151031605
L5200310: RNCC: 3 | RNVC: 2
DE160.03.218: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-109-6222
Access Door

151096222
002901: RNCC: 3 | RNVC: 2

2 Dec 1989

5340-15-102-1546
Electrical-Me Post

151021546
8243.01.05: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-059-8099
Graffa Bloccaggio

150598099
616010091: RNCC: 3 | RNVC: 2

26 Jun 1976

5340-15-163-2990
Klemmstueck

151632990
6000.049: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-166-5032
Bracket

151665032
311A2510019: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-170-3130
Cover

151703130
321305-P26: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-101-7832
Fascetta Speciale

151017832
SC32674.77D: RNCC: 3 | RNVC: 2

21 Jul 1987

5340-15-194-0094
Double Angle Bracket

151940094
500403527: RNCC: 3 | RNVC: 2
06411114: RNCC: 6 | RNVC: 9

12 Aug 2010

5340-15-198-0871
Supporto

151980871
08223-101: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-15-155-8266
Support Bracket

151558266
4112T93G02: RNCC: 3 | RNVC: 2
4112T93G02: RNCC: 3 | RNVC: 2

11 Jul 2002

5340-15-166-5217
Internal Spli Disk

151665217
130326: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-166-5206
Cilindro Iseo Mm.70

151665206
82003535: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-139-7549
Cinghia Gancio

151397549
0007376: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-000-1919
Mounting Bracket

150001919
HP.32151: RNCC: 3 | RNVC: 2

8 Feb 2013

5340-15-105-6042
Staffa A Gomito

151056042
9468: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-231-8759
Fermo Staffa

152318759
93940214: RNCC: 3 | RNVC: 2
534015E094786: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-151-8679
Tassello Gomma

151518679
60120178: RNCC: 3 | RNVC: 2

14 Jul 2000

5340-15-204-4894
Clamp Half

152044894
42563775: RNCC: 3 | RNVC: 2
CV179052A: RNCC: 5 | RNVC: 2
7118859: RNCC: 5 | RNVC: 2

7 Nov 2011

5340-15-115-2292
Lever

151152292
518031430: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-003-3457
Quick Release Plunger

150033457
182742241: RNCC: 3 | RNVC: 2
(241)A0199182742241: RNCC: 5 | RNVC: 2

4 Nov 2013

5340-15-155-5202
Access Door

151555202
(241)A5015DE004.03.143: RNCC: 3 | RNVC: 2
DE004.03.143: RNCC: 3 | RNVC: 2

8 Apr 2002

5340-15-100-4540
Serie Bulloneria

151004540
SC32672.BU: RNCC: 3 | RNVC: 2

20 Jul 1987

5340-15-190-0294
Frizione Bidisco

151900294
FRIZIONEBIDISCO: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-127-6387
Staffetta Fis.Cavi

151276387
723763: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-219-8892
Moschettone Lega Le

152198892
DAN0140: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-204-3345
Telaio

152043345
0000500428528: RNCC: 3 | RNVC: 2
(241)A39630000500428528: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-220-2418
Piombo In Pastiglie

152202418
PIOMBIDIAMMM8: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-230-4640
Manicotto Abrasivo

152304640
PCH16L: RNCC: 3 | RNVC: 2
534015E064964: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-112-8334
Giuntoam

151128334
471270: RNCC: 3 | RNVC: 2
D0471270: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-189-6055
Lucchetto Da 40 Mm

151896055
LUCCHETTO40MM: RNCC: 3 | RNVC: 2

26 Feb 2010

5340-15-112-8480
Coperchior

151128480
467673: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-163-2350
Radiator Plug

151632350
8107632: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-163-1706
Support

151631706
9617062780: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-060-6618
Cerniera Superiore

150606618
1971TAV69-22PART1DESTRA: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-166-5104
Maniglioni

151665104
CISA: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-153-5426
Helical Compression Spring Seat

151535426
80250: RNCC: 3 | RNVC: 2

8 Feb 2001

5340-15-103-8069
Accesso Coperchio

151038069
0016100: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-000-1524
Fascetta Autoblocc.

150001524
0552079360: RNCC: 3 | RNVC: 2

1 Feb 2013

5340-15-153-1392
Resilient Mount

151531392
17853: RNCC: 3 | RNVC: 2

1 Dec 2000

5340-15-219-9217
Moschettoni Pompier

152199217
MM.100: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-109-5336
Nut And Bolt Locking Plate

151095336
DOR0113390: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-058-2871
Electronic Equipment Hardware Kit

150582871
21-98: RNCC: 3 | RNVC: 2

27 Mar 1975

5340-15-067-0194
Zinco

150670194
35033-44635BZ: RNCC: 2 | RNVC: 2

1 Apr 1998

5340-15-118-2894
Piastrina In Acciai

151182894
D1408306: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-15-009-5834
Cover Plate Access

150095834
75452412: RNCC: 3 | RNVC: 2
9983601: RNCC: 5 | RNVC: 2
75452412: RNCC: 5 | RNVC: 9

22 Sep 1979

5340-15-108-7634
Resilient Mount

151087634
AL1000: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-152-1565
Piastrina

151521565
60187664: RNCC: 3 | RNVC: 2

8 Aug 2000

5340-15-206-3552
Angle Bracket

152063552
50040 5175: RNCC: 3 | RNVC: 2

4 Jun 2012

5340-15-061-4531
Electrical-Me Post

150614531
P44MA47: RNCC: 5 | RNVC: 2
P44MA47: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-051-3759
Fermaglio

150513759
9913320: RNCC: 3 | RNVC: 2
9913320: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-103-2060
Cavallotto Defletto

151032060
L2183050: RNCC: 3 | RNVC: 2
DE160.03.081: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-156-3882
Bracket

151563882
CBD70796P03: RNCC: 3 | RNVC: 2
(241)A3460CBD70796P03: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-003-5162
Staffa

150035162
4511206: RNCC: 3 | RNVC: 2
4511206: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-074-4241
Turnbuckle

150744241
1D22UNI2019A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-074-4306
Turnbuckle

150744306
1B12UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-114-3564
Electrical-Me Post

151143564
5216-239-24: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-15-068-4393
Padlock

150684393
SH 3875-001: RNCC: 3 | RNVC: 2

9 Oct 1986

5340-15-009-5822
Helical Compression Spring Seat

150095822
75448811: RNCC: 3 | RNVC: 2
9982521: RNCC: 5 | RNVC: 2
75448811: RNCC: 5 | RNVC: 9

22 Sep 1979

5340-15-186-9118
Spacing Threaded Standoff

151869118
353142: RNCC: 3 | RNVC: 2
353142: RNCC: 5 | RNVC: 9

5 Jan 2009

5340-15-180-1598
Nut And Bolt Locking Plate

151801598
6320053: RNCC: 3 | RNVC: 2

15 Feb 2008

5340-15-170-5517
Braket

151705517
14ID2001-1: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-15-179-7189
Double Angle Bracket

151797189
0000500400761: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-120-6631
Resilient Mount

151206631
D0467633: RNCC: 3 | RNVC: 2

8 May 1996

5340-15-122-5581
Rear Pivot

151225581
01TL21033: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-117-0684
Locking Mechanism

151170684
284901051D: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-139-7553
Fissaggio Gaffetta

151397553
0007557: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-155-9664
Gancio A Staffa

151559664
500336557: RNCC: 3 | RNVC: 2

17 Oct 2002

5340-15-219-8588
Disco A Strappo Dia

152198588
115 GR 120: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-163-2252
Rubber Sleeve

151632252
17743687: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-100-5472
Tirante Flangiato

151005472
8962: RNCC: 3 | RNVC: 2

28 Aug 1983

5340-15-107-1824
Resilient Mount

151071824
RS411951A: RNCC: 3 | RNVC: 2

24 May 1989

5340-15-115-2318
Handle

151152318
518023040: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-001-6520
Molla

150016520
174016042: RNCC: 3 | RNVC: 2
174016042: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-204-6463
Speci Ammortzzatore

152046463
471656778: RNCC: 3 | RNVC: 2

5 Dec 2011

5340-15-166-4979
Insert

151664979
2640788: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-116-8594
Speciale Coperchio

151168594
D0468176: RNCC: 3 | RNVC: 2

8 Apr 1994

5340-15-054-3717
Staffa Sinistra

150543717
526054: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-130-4912
Seal Assembl

151304912
SEL22: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-074-4132
Turnbuckle

150744132
2C56UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-058-5469
Bandella Metallica

150585469
112136: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-236-3091
Serratura Da Infila

152363091
534015E004357: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-154-7715
Mechanic Equipment Hardware Kit

151547715
G143400: RNCC: 3 | RNVC: 2

18 Sep 2001

5340-15-156-3917
Hook

151563917
CBD70798P01: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-115-2751
Guard

151152751
518051930: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-156-1888
Resilient Mount

151561888
60165210: RNCC: 3 | RNVC: 2

11 Dec 2002

5340-15-065-6896
Leva Di Bloccaggio

150656896
741414: RNCC: 3 | RNVC: 2

26 Oct 1985

5340-15-007-2517
Accesso Coperchio

150072517
1372735: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-189-0078
Spec Assieme Tappo

151890078
R004BE340-1: RNCC: 3 | RNVC: 2
(241)A2829R004BE340-1: RNCC: 5 | RNVC: 2

15 Jan 2010

5340-15-113-9933
Ralla

151139933
D0473740: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-15-105-2540
Piastra Rattoppo Ri

151052540
999690132G: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-231-6087
Silentblock

152316087
0-101146: RNCC: 3 | RNVC: 2
534015E089772: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-193-9693
Staffa Per Tubazion

151939693
76041237: RNCC: 3 | RNVC: 2

10 Aug 2010

5340-15-103-0997
Electrical-Me Post

151030997
L3300092: RNCC: 3 | RNVC: 2
DE160.03.086: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-138-5536
Fascetta

151385536
7656125: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-127-7521
Molla

151277521
60094110: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-197-0209
Snap Hook

151970209
PN UAS 00029074: RNCC: 3 | RNVC: 2
4030F76026729: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-142-8953
End Cap Assembly

151428953
DI217: RNCC: 3 | RNVC: 2

22 Oct 1996

5340-15-231-1141
Lucchetto Corazzato

152311141
4015: RNCC: 3 | RNVC: 2
534015E089897: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-121-9641
Threaded End Tensioning Tie Rod

151219641
042603: RNCC: 3 | RNVC: 2

2 Apr 1996

5340-15-068-0536
Padlock

150680536
22010-50-0: RNCC: 3 | RNVC: 2

28 Jan 1986

5340-15-155-8261
Double Angle Bracket

151558261
4112T79G01: RNCC: 3 | RNVC: 2
4112T79G01: RNCC: 3 | RNVC: 2

11 Jul 2002

5340-15-155-6273
Sealing Plug Assembly

151556273
1PA3488VA0002693: RNCC: 3 | RNVC: 2
VA0002693: RNCC: 3 | RNVC: 2

2 May 2002

5340-15-117-1457
Manual Control Lever

151171457
16000A103140: RNCC: 5 | RNVC: 2
T0065017: RNCC: 5 | RNVC: 2
16000A103140: RNCC: 5 | RNVC: 9

10 Aug 1993

5340-15-206-8488
Sliding Door Track Bracket

152068488
9817 6968: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-065-2507
Molla

150652507
580.19438.1: RNCC: 3 | RNVC: 2

27 Oct 1981

5340-15-149-4560
Piastrino Metallico

151494560
1083-22-1: RNCC: 3 | RNVC: 2

10 Mar 1999

5340-15-207-8604
Utility Resilient Mount

152078604
5801321792: RNCC: 3 | RNVC: 2

20 Nov 2012

Load More Results