What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 46 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 46 of 72

5340-15-197-8816
Antivibrante

151978816
MG20: RNCC: 3 | RNVC: 2

24 May 2004

5340-15-195-1540
Utility Resilient Mount

151951540
1792-01-175: RNCC: 3 | RNVC: 2
14100024375: RNCC: 5 | RNVC: 2

4 Mar 2011

5340-15-160-1105
Padlock

151601105
F720053101: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-112-7756
Cover Air Cleaner

151127756
2605036: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-215-0322
Fascetta (Confezion

152150322
200X3,5: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-213-8752
Tappo Intestatura P

152138752
NEWE084: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-125-5535
Terminale A Tubo

151255535
1605020: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-137-1058
Fascetta Com

151371058
72783: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-122-5099
Clamp With

151225099
1-04411-90: RNCC: 3 | RNVC: 2
01TL22152: RNCC: 5 | RNVC: 2

3 Sep 1996

5340-15-152-3903
Staffetta

151523903
4635335058: RNCC: 3 | RNVC: 2
0-117582: RNCC: 5 | RNVC: 2
4635335058: RNCC: 5 | RNVC: 2

6 Sep 2000

5340-15-198-5811
Assieme Scatola

151985811
A138232-1: RNCC: 3 | RNVC: 2
(241)A0076A138232-1: RNCC: 5 | RNVC: 2

15 Oct 2004

5340-15-116-8586
Piastra Di Collegam

151168586
D0469746: RNCC: 3 | RNVC: 2

8 Apr 1994

5340-15-001-7989
Angle Bracket

150017989
41430825: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-009-0487
Helical Compression Spring Seat

150090487
4578175: RNCC: 2 | RNVC: 2

16 Apr 1980

5340-15-119-9124
Guida

151199124
142004192: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-186-9525
Fuel Storage Tank Vent Cap

151869525
105324611: RNCC: 3 | RNVC: 2
178904210: RNCC: 5 | RNVC: 2
(241)A0199178904210: RNCC: 5 | RNVC: 2

9 Jan 2009

5340-15-108-8024
Helical Compression Spring Seat

151088024
60103611: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-219-4662
Sonda Poliestere Mm

152194662
550996: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-109-9007
Sfera

151099007
568062: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-074-4307
Turnbuckle

150744307
1B16UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-074-4347
Turnbuckle

150744347
1C6UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-104-8914
Fissaggio Gaffetta

151048914
23309: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-074-4445
Turnbuckle

150744445
1C22UNI2021A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-189-9704
Lucchetti

151899704
E338: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-074-4195
Turnbuckle

150744195
1B30UNI2019A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-166-4812
Serratura Da Infila

151664812
4415070: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-212-0792
Cremonese Impugn.In

152120792
MOD. 07: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-068-1840
Anello Speciale

150681840
474200: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-15-115-0987
Double Angle Bracket

151150987
14668PART.3: RNCC: 3 | RNVC: 2

15 Oct 1993

5340-15-007-3723
Fascetta Speciale

150073723
0-33818: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-116-2683
Handwheel

151162683
190521260: RNCC: 3 | RNVC: 2
(241)A0199190521260: RNCC: 5 | RNVC: 2

15 Apr 1993

5340-15-120-6494
Flangia A Scafo Per

151206494
D0287044: RNCC: 3 | RNVC: 2

28 Jun 1996

5340-15-105-5965
Staffa A Gomito

151055965
8983667: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-166-4817
Lucchetto Cisa Mm.4

151664817
LUCCHETT0MM40: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-199-8481
Anchor Strap

151998481
9CS3703089: RNCC: 3 | RNVC: 2
(241)A91729CS3703089: RNCC: 5 | RNVC: 2

14 Jun 2005

5340-15-123-5014
Cerniera Fiat Uno

151235014
7635384: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-160-0489
Lucchetto Pic

151600489
F720118371: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-163-1452
Support

151631452
500354822: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-156-3653
Dust Protective Cap

151563653
(241)A3460CBD71094P01: RNCC: 3 | RNVC: 2
CBD71094P01: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-148-7495
Assieme Sede

151487495
2104-0025-001: RNCC: 3 | RNVC: 2

30 Sep 1998

5340-15-218-5308
Tampone Abrasivo Gr

152185308
9696-280: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-113-7028
Strisciaincollaggio

151137028
113A6011-403: RNCC: 3 | RNVC: 2

10 Feb 1992

5340-15-103-1084
Riscontro

151031084
DE013.13.775: RNCC: 3 | RNVC: 2
(241)A5015DE013.13.775: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-103-1548
Control Rod

151031548
L5203099: RNCC: 3 | RNVC: 2
(241)A5015DE160.03.335: RNCC: 5 | RNVC: 2
DE160.03.335: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-007-7004
Cover Plate Access

150077004
1141-39-201: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-220-5721
Gancio In Plastica

152205721
GANCIOPANNELLO: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-178-9915
Plate

151789915
RS 404 367: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-065-2225
Line Supporting Strap

150652225
350703000010: RNCC: 5 | RNVC: 2
350703000010: RNCC: 5 | RNVC: 9

21 Jan 1985

5340-15-180-6934
Corrosion Preventive Anode

151806934
F1: RNCC: 3 | RNVC: 2

4 Jul 2008

5340-15-156-9589
Nonmetallic Solid Wheel

151569589
1001150503: RNCC: 3 | RNVC: 2

24 Mar 2003

5340-15-112-9179
Double Angle Bracket

151129179
78957: RNCC: 3 | RNVC: 2

15 Jan 1996

5340-15-150-6027
Double Angle Bracket

151506027
108965: RNCC: 3 | RNVC: 2

6 Dec 1999

5340-15-061-5163
Nut And Bolt Retainer

150615163
P26HC35: RNCC: 5 | RNVC: 2
P26HC35: RNCC: 5 | RNVC: 9

12 Oct 1977

5340-15-195-1558
Metallic Seal Cap

151951558
412-4600-27-103: RNCC: 3 | RNVC: 2

4 Mar 2011

5340-15-142-2170
Handwheel

151422170
W007716: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-192-1400
Protective Cap

151921400
G8402E14N71: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-061-4969
Access Cover Plate

150614969
000200291150: RNCC: 5 | RNVC: 2
000200291150: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-113-8552
Corrosion Preventive Anode

151138552
1P 541702: RNCC: 3 | RNVC: 2
2.2564R8: RNCC: 3 | RNVC: 2
1P 541702: RNCC: 5 | RNVC: 9

13 Oct 1994

5340-15-176-2131
Nottolino

151762131
0740.7: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-063-8011
Plastic Bumper

150638011
1137/24: RNCC: 3 | RNVC: 2
77901409: RNCC: 5 | RNVC: 2

31 Mar 1982

5340-15-162-2325
Hook

151622325
K1810-32: RNCC: 3 | RNVC: 2

17 May 2001

5340-15-149-5099
Anello Di Fermo Spe

151495099
2302-0273-001: RNCC: 3 | RNVC: 2

30 Mar 1999

5340-15-160-9007
Serratura

151609007
F720176211: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-105-8199
Sostegno Elastico

151058199
22001: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-126-4489
Molla A Spir.In Acc

151264489
14560-15: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-116-8492
Control Rod

151168492
D1402602: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-15-179-6550
Bag

151796550
873-5800-366: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-062-9496
Anello Speciale

150629496
0-100714: RNCC: 3 | RNVC: 2

21 Mar 1982

5340-15-061-3841
Access Cover Plate

150613841
000200169600: RNCC: 5 | RNVC: 2
000200169600: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-113-9689
Supportospeciale

151139689
252A3124-401: RNCC: 3 | RNVC: 2

31 Mar 1992

5340-15-174-6571
Rear Case

151746571
9903905462: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-15-157-7260
Turnbuckle

151577260
TENDITORE INOX CRNI UN16900 20MM: RNCC: 3 | RNVC: 2

16 Oct 2003

5340-15-119-5438
Sadd Pipe Support

151195438
1Q 504893: RNCC: 3 | RNVC: 2
1Q 504893: RNCC: 5 | RNVC: 9

21 Mar 1996

5340-15-163-1199
Clip

151631199
7654427: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-051-3693
Snodo Apertura Cris

150513693
896430: RNCC: 3 | RNVC: 2
896430: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-103-1045
Blocchetto Di Massa

151031045
DE013.13.507: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-121-4323
Dust And Moisture Seal Protective Plug

151214323
554121148000: RNCC: 3 | RNVC: 2
541-21-1480: RNCC: 5 | RNVC: 2

17 Oct 1996

5340-15-051-4266
Escutcheon Plate

150514266
4535606: RNCC: 3 | RNVC: 2
4535606: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-162-0695
Bracket

151620695
137618860: RNCC: 3 | RNVC: 2

28 Dec 2000

5340-15-200-7683
Protezione Per Tras

152007683
071583301: RNCC: 3 | RNVC: 2
(241)A2980071583301: RNCC: 5 | RNVC: 2

23 Feb 2006

5340-15-177-6419
Foldable Handle

151776419
2000248: RNCC: 3 | RNVC: 2

4 Jun 2004

5340-15-151-9481
Double Angle Bracket

151519481
0-172827: RNCC: 3 | RNVC: 2
00172827: RNCC: 3 | RNVC: 2
(241)A39630-172827: RNCC: 5 | RNVC: 2

26 Jul 2000

5340-15-179-0032
Plate

151790032
RS 413 773 A: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-157-9820
Half Hinge

151579820
J94345353-001: RNCC: 3 | RNVC: 2

14 Dec 2003

5340-15-207-3829
Utility Resilient Mount

152073829
NMOL016853: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-15-149-3133
Multiple Angle Bracket

151493133
4886040: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-066-4992
Anello Antivibrante

150664992
B0024/R15: RNCC: 3 | RNVC: 2

1 Mar 1986

5340-15-153-7448
Testa Di Tirante Fi

151537448
142065118: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-068-6340
Hand Carrying Strap Assembly

150686340
BT27008: RNCC: 3 | RNVC: 2

10 May 1986

5340-15-063-8845
Helical Compression Spring Retainer

150638845
56003: RNCC: 3 | RNVC: 2

15 Sep 1982

5340-15-219-9518
Cerniere Anuba Da C

152199518
CERNIERE ANUBA: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-206-5773
Corrosion Preventive Anode

152065773
FX2A: RNCC: 3 | RNVC: 2
(241)AJ578FX2A: RNCC: 5 | RNVC: 2

26 Jun 2012

5340-15-178-0678
Mechanic Equipment Hardware Kit

151780678
053212: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-15-122-5540
Fork Centre

151225540
01TL21201-01: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-134-4418
Staffa Elastica

151344418
633710L: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-166-4914
Gancio Orientabile

151664914
552182: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-102-6088
Comando Pompa Iniez

151026088
70932: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-194-4002
Filler Opening Cap

151944002
168460420: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-15-158-4086
Dust And Moisture Seal Protective Plug

151584086
0-122989: RNCC: 3 | RNVC: 2
1PA39630-122989: RNCC: 5 | RNVC: 2

3 Feb 2004

5340-15-117-9160
Maniglia Speciale A

151179160
263A1642-403: RNCC: 3 | RNVC: 2

31 Jan 1994

5340-15-231-7553
Cilindro Ovale Per

152317553
063.30.00.0: RNCC: 3 | RNVC: 2
534015E075477: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-199-5698
Attacco Filettato 1

151995698
W035808: RNCC: 3 | RNVC: 2

1 May 2005

5340-15-215-5513
Drive Compact Air R

152155513
AT705A: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-203-1946
Gripping Hook

152031946
12HJ04343435S01-433/2: RNCC: 3 | RNVC: 2

28 Nov 2007

5340-15-154-1666
Assieme Supporto

151541666
A-C129924-1/6: RNCC: 3 | RNVC: 2

27 Mar 2001

5340-15-108-0541
Adapter

151080541
C01-1100-303: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-103-4131
Piston

151034131
276580ART50: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-213-8757
Maniglia Master

152138757
GS2472: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-168-9407
Padlock

151689407
F72001543: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-220-0481
Turning Vanes Alta

152200481
S1-96: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-000-7218
Lock-Release Lever

150007218
BRP-0336055: RNCC: 3 | RNVC: 2

3 Apr 2013

5340-15-007-5016
Nonrotating Shaft Eye Bracket

150075016
1239-01-024: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-111-6384
Holder

151116384
144723-01: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-181-0712
Protection Net

151810712
N925G1566201: RNCC: 3 | RNVC: 2

15 Oct 2008

5340-15-127-6738
Fascetta Stringitub

151276738
981324: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-061-3772
Asta Speciale

150613772
163DD6: RNCC: 5 | RNVC: 2
163DD6: RNCC: 5 | RNVC: 9

22 Sep 1977

5340-15-179-6700
Runner

151796700
500321017: RNCC: 3 | RNVC: 2
(241)A4249500321017: RNCC: 5 | RNVC: 2

7 Jun 2007

5340-15-181-1138
Head

151811138
D0407148: RNCC: 3 | RNVC: 2
(241)A4912D0407148: RNCC: 5 | RNVC: 2

29 Oct 2008

5340-15-061-2683
Electrical-Me Post

150612683
041200149700: RNCC: 5 | RNVC: 2
1200096-171000003: RNCC: 5 | RNVC: 2
041200149700: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-198-8711
Antivibrante

151988711
0013156: RNCC: 3 | RNVC: 2
51-614: RNCC: 5 | RNVC: 2

23 Nov 2004

5340-15-200-0586
Seal Washer

152000586
13HJ04643008S01-801-16: RNCC: 3 | RNVC: 2

19 Sep 2005

5340-15-118-0384
Cilindro In Acciaio

151180384
D0484565: RNCC: 3 | RNVC: 2

18 Nov 1994

5340-15-074-4059
Turnbuckle

150744059
1B27UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-120-0379
Resilient Mount

151200379
VZA-R-300: RNCC: 3 | RNVC: 2

5 Oct 1995

5340-15-065-7295
Sadd Pipe Support

150657295
109-0616-64-3: RNCC: 3 | RNVC: 2

16 Dec 1984

5340-15-104-4321
Testa Tira Forcella

151044321
592724: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-101-7849
Fascetta Speciale

151017849
SC32674.85S: RNCC: 3 | RNVC: 2

21 Jul 1987

5340-15-208-8306
Lucchetto Yale Da M

152088306
60: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-068-1955
Gruppo Staffaggio

150681955
644639: RNCC: 3 | RNVC: 2
644639: RNCC: 5 | RNVC: 9

27 Feb 1986

5340-15-001-5487
Stand Base

150015487
182719584: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-15-122-5920
Electrical-Me Post

151225920
S9UC1200012: RNCC: 5 | RNVC: 2
S9UC1200012: RNCC: 5 | RNVC: 9
S9UC1200012: RNCC: 5 | RNVC: 9

10 Sep 1996

5340-15-101-7815
Fascetta Speciale

151017815
SC32673.30: RNCC: 3 | RNVC: 2

21 Jul 1987

5340-15-118-6412
Plug

151186412
155L5150: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-193-6745
Antivibrante

151936745
163140123: RNCC: 3 | RNVC: 2
163140123-01: RNCC: 5 | RNVC: 2
(241)A0199163140123: RNCC: 5 | RNVC: 2
5340PL1035198: RNCC: 6 | RNVC: 9

28 Jun 2010

5340-15-118-3862
Resilient Mount

151183862
60156819: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-007-2659
Supporto

150072659
1380604: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-198-6170
Shackle

151986170
990720: RNCC: 3 | RNVC: 2
(241)A3593990720: RNCC: 5 | RNVC: 2

19 Oct 2004

5340-15-064-6864
Hinge

150646864
P-175604-001: RNCC: 3 | RNVC: 2
P175604-001: RNCC: 5 | RNVC: 2

10 Jun 1984

5340-15-119-8581
Hinge

151198581
0815-05520: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-198-5644
Cappuccio Per Cavet

151985644
99182047: RNCC: 3 | RNVC: 2

14 Oct 2004

5340-15-068-0522
Cover

150680522
4958819: RNCC: 3 | RNVC: 2
4958819: RNCC: 5 | RNVC: 9

7 Jan 1986

5340-15-117-9100
Headless Grooved Rod

151179100
433A1215-001: RNCC: 3 | RNVC: 2

31 Jan 1994

5340-15-159-9729
Rubber Bumper

151599729
122603501: RNCC: 3 | RNVC: 2

19 Apr 2004

5340-15-112-8509
Occhiello

151128509
471827: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-156-2015
Base

151562015
CBD71155P01: RNCC: 3 | RNVC: 2
(241)A3460CBD71155P01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-176-7592
Spring (Pdr Washer

151767592
B10,5UNI1751: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-162-7820
Wheel Assy Block

151627820
74803017: RNCC: 3 | RNVC: 2

22 Feb 2002

5340-15-135-9845
Fermaglio

151359845
18826-1: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-111-5880
Mounting

151115880
A12193-01-20: RNCC: 3 | RNVC: 2
A12193-01-20: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-105-6288
Collare Serraggio

151056288
38983843: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-134-2876
Coperchi Fermaglio

151342876
4064928: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-207-3460
Positioning Thrust Stop

152073460
GFM01774A000: RNCC: 3 | RNVC: 2

9 Oct 2012

5340-15-180-5081
Maniglia Inferiore

151805081
55MM6MI: RNCC: 3 | RNVC: 2
(241)A380455MM6MI: RNCC: 5 | RNVC: 2

10 Jun 2008

5340-15-066-2365
Bracket

150662365
F492A1A4: RNCC: 3 | RNVC: 2

10 Feb 1986

5340-15-158-6525
Speciale Maniglia

151586525
162516126: RNCC: 3 | RNVC: 2

12 Mar 2004

5340-15-153-7056
Sostegno Elastico

151537056
DS25333/S 50X28: RNCC: 3 | RNVC: 2
142010584: RNCC: 5 | RNVC: 2

22 Feb 2001

5340-15-127-6600
Guarnizione Passagg

151276600
844459: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-134-2609
Tubazione D Staffa

151342609
4633768: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-194-4362
Paracolpo In Strisc

151944362
BP5042: RNCC: 3 | RNVC: 2
(241)ADA53BP5042: RNCC: 5 | RNVC: 2

12 Nov 2010

5340-15-105-6303
Collare Serraggio

151056303
10292390: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-107-5760
Cavallotto Fissaggi

151075760
DE160.03.405: RNCC: 3 | RNVC: 2
(241)A5015DE160.03.405: RNCC: 5 | RNVC: 2

5 Jan 1989

5340-15-156-2020
Locking Base Assy

151562020
(241)A3460CBD71174G01: RNCC: 3 | RNVC: 2
CBD71174G01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-177-4895
Sliding Shoe

151774895
D1421521: RNCC: 3 | RNVC: 2
(241)A0461D1421521: RNCC: 5 | RNVC: 2

27 Aug 2004

5340-15-155-4918
Alignment Tool

151554918
CBD71128P02: RNCC: 3 | RNVC: 2

28 Mar 2002

5340-15-156-3432
Rotella Rigida

151563432
(241)A3610NDK 200/FX: RNCC: 3 | RNVC: 2
NDK 200/FX: RNCC: 3 | RNVC: 2

30 Jan 2003

5340-15-180-9484
Coor Assy

151809484
J94346713-403: RNCC: 3 | RNVC: 2
(241)A0019J94346713-403: RNCC: 5 | RNVC: 2

2 Sep 2008

5340-15-191-0210
End Brake Rod Adgjs

151910210
401589: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-156-2001
Base

151562001
(241)A3460CBD71167P01: RNCC: 3 | RNVC: 2
CBD71167P01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-105-6301
Collare Serraggio

151056301
737401: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-110-1821
Handwheel

151101821
518341-02: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-149-7553
Handwheel

151497553
519566-02: RNCC: 3 | RNVC: 2

24 Jun 1999

5340-15-112-0431
Piastrina Speciale

151120431
275A0402-403: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-119-9045
Turnbuckle

151199045
142004189: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-139-8031
Piastrina Bloccaggi

151398031
1001903: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-134-3543
Collare

151343543
4641046: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-194-8734
Plate Pressure

151948734
3269423: RNCC: 3 | RNVC: 2
10/300280: RNCC: 5 | RNVC: 2

27 Jan 2011

5340-15-005-6881
Leva Speciale

150056881
0-48699: RNCC: 3 | RNVC: 2

12 Aug 1979

5340-15-120-4581
Supportomensolaspec

151204581
145365-1: RNCC: 3 | RNVC: 2

29 May 1995

5340-15-237-7414
Contropiastra Serra

152377414
517.250.55: RNCC: 3 | RNVC: 2
534015E082736: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-217-1955
Canalina Bianca 40X

152171955
RE4040B: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-170-6205
Crown

151706205
3308162: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-15-138-2944
Fermo

151382944
11065475: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-215-3137
Specchio Flex

152153137
BT1715FL/1: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-182-6226
Serratura

151826226
SSCM105/Y21: RNCC: 3 | RNVC: 2
095715215: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-198-4958
Control Rod

151984958
D8303797: RNCC: 3 | RNVC: 2
(241)A0461D8303797: RNCC: 5 | RNVC: 2

7 Oct 2004

5340-15-153-7247
Base (1) Per Sosteg

151537247
142030127: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-236-5126
Ruote In Gomma Fiss

152365126
3982014: RNCC: 3 | RNVC: 2
534015E015387: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-166-5155
Fascetta In Conf. D

151665155
233424: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-213-8761
Serratura Da Applic

152138761
481-60-3: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-154-1775
Corpo Pistone

151541775
130353-1: RNCC: 3 | RNVC: 2

27 Mar 2001

5340-15-119-5392
Anello Di Battuta C

151195392
D0484484: RNCC: 3 | RNVC: 2

24 Mar 1995

5340-15-101-5009
Maniglia Complessiv

151015009
UA25001-295: RNCC: 3 | RNVC: 2

20 May 1988

5340-15-153-4021
Elettro-Me Raccordo

151534021
5137-321-12: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-049-7465
Blocchetto Gomma

150497465
AB682-107-10: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-213-0849
Fascetta Stringitub

152130849
10000S: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-053-9457
Gancio

150539457
260-11-124-11: RNCC: 3 | RNVC: 2
260-11-124-11: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-063-0241
Tappo Compl

150630241
204-3100-06-9: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-102-0393
Dust And Moisture Seal Protective Cap

151020393
0959U01: RNCC: 3 | RNVC: 2

25 Nov 1992

5340-15-192-1033
Testarmadio 100Cp.

151921033
100CP.: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-236-7933
Ruota Biba Mm.100 P

152367933
BIBAAV10: RNCC: 3 | RNVC: 2
534015E088046: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-176-7269
Tassello Con Vite D

151767269
FISCHER7MM: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-110-2684
Assieme Tassello

151102684
27588-1: RNCC: 3 | RNVC: 2
27588-1: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-185-6083
Pioli Completi Zinc

151856083
473A/IBFM: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-147-0517
Pressione Tappo

151470517
086.059573.006: RNCC: 3 | RNVC: 2

18 Aug 1997

5340-15-115-7125
Flangia Tubo Misura

151157125
D1401084: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-15-218-4006
Maniglia

152184006
MNGL-PRT: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-115-2342
Guard

151152342
518310130: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-117-5515
Resilient Mount

151175515
VZA 200: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-15-105-2537
Piastra Rattoppo Ri

151052537
999690131F: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-074-4089
Turnbuckle

150744089
2B64UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-160-0187
Padlock

151600187
F720034951: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-114-7456
Hinge

151147456
301-416: RNCC: 3 | RNVC: 2
301-416: RNCC: 5 | RNVC: 2
301-416: RNCC: 5 | RNVC: 9

4 Aug 1992

5340-15-117-9609
Corrosion Preventive Anode

151179609
65454F01: RNCC: 3 | RNVC: 2
65454F01: RNCC: 3 | RNVC: 2
65454F01: RNCC: 5 | RNVC: 9

20 Oct 1994

5340-15-120-6463
Blocchetto Metallic

151206463
D0466788: RNCC: 3 | RNVC: 2

26 Jun 1996

5340-15-185-1052
Coppia Terminale Zi

151851052
08-0284: RNCC: 3 | RNVC: 2
0357-18898: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-166-6627
Escutcheon Plate

151666627
APSR: RNCC: 3 | RNVC: 2
APSR: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-166-5136
Terminale A Tubo

151665136
1605040: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-149-8082
Spacing Threaded Standoff

151498082
123147: RNCC: 3 | RNVC: 2
0052408: RNCC: 5 | RNVC: 2

2 Jun 1999

5340-15-198-6162
Twistlock Right Loc

151986162
020888: RNCC: 3 | RNVC: 2
(241)A3593020888: RNCC: 5 | RNVC: 2

19 Oct 2004

5340-15-108-7136
Helical Compression Spring Seat

151087136
969880: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-153-3036
Headless Straight Rod

151533036
122605216: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-15-166-5220
Bod Piston

151665220
1303531: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-206-5643
Ritegno Della Tenut

152065643
920535P01: RNCC: 3 | RNVC: 2
(241)A3460920535P01: RNCC: 5 | RNVC: 2

26 Jun 2012

5340-15-149-8986
Corrosion Preventive Anode

151498986
W021720A: RNCC: 3 | RNVC: 2

21 Jul 1999

5340-15-213-8102
Placca In Lega Spec

152138102
07077-28-0: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-125-9425
Lucchetto Ka Da Mm.

151259425
ART303: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-170-8238
Piano Cofano Forato

151708238
340-0093/06: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-103-6129
Support

151036129
5800-07: RNCC: 3 | RNVC: 2

10 Apr 1989

5340-15-110-4950
Sostegno Elastico

151104950
79043349: RNCC: 3 | RNVC: 2
79043349: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-166-4796
Handle

151664796
2690B25: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-166-4742
Piastrina Guidacavo

151664742
63370101B1: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-156-2635
Resilient Mount

151562635
0550074: RNCC: 3 | RNVC: 2
(241)A97720550074: RNCC: 5 | RNVC: 2

19 Dec 2002

5340-15-149-0614
Arresto Chiusura

151490614
970426: RNCC: 3 | RNVC: 2

23 Nov 1998

5340-15-115-7029
Sfera Per Rubinetto

151157029
D0487296: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-061-3819
Piastrina Metallica

150613819
P36DD8: RNCC: 5 | RNVC: 2
P36DD8: RNCC: 5 | RNVC: 9

22 Sep 1977

5340-15-112-0422
Dispositivo Di Supp

151120422
275A1331-401: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-166-4885
Linguetta

151664885
7903097188: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-074-4166
Turnbuckle

150744166
1A12UNI12019A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-120-6714
Control Rod

151206714
D0491535: RNCC: 3 | RNVC: 2

28 Jun 1996

5340-15-005-5328
Access Cover Plate

150055328
1026-01-279: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-009-0919
Cover Plate Access

150090919
1376-61-555: RNCC: 3 | RNVC: 2
137661555: RNCC: 5 | RNVC: 2

1 Jun 1987

5340-15-003-1435
Manual Control Handle

150031435
5949791850: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-151-7552
Hinge Assembly

151517552
J52850250-402: RNCC: 3 | RNVC: 2

5 Jul 2000

5340-15-207-8671
Angle Bracket

152078671
5801346828: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-005-6471
Anello Di Sicurezza

150056471
0-21130: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-153-9452
Forcella Testa Di T

151539452
142061265: RNCC: 2 | RNVC: 3

12 Mar 2001

5340-15-153-6649
Base (1) Per Sosteg

151536649
142052033: RNCC: 1 | RNVC: 3

20 Feb 2001

5340-15-116-8599
Piastrino

151168599
D0466949: RNCC: 3 | RNVC: 2

8 Apr 1994

5340-15-147-9619
Staffa Ancoraggio

151479619
P3383POS.4: RNCC: 3 | RNVC: 2

19 Jun 1998

5340-15-139-7143
Fissaggio Cabinetta

151397143
A.0585000: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-127-3799
Staffa Sostegno Sil

151273799
849787: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-110-9205
Attaccoassieme

151109205
257584G1: RNCC: 3 | RNVC: 2

10 Sep 1990

5340-15-120-6767
Supporto Carenatura

151206767
D1401536: RNCC: 3 | RNVC: 2

29 Jun 1996

5340-15-112-8620
Access Door

151128620
471706: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-104-4347
Testa Tira Forcella

151044347
736450: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-152-8117
Torretta Di Bloccag

151528117
P110510: RNCC: 3 | RNVC: 2

27 Oct 2000

5340-15-166-5077
Fitting

151665077
31360001: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-118-2820
Leva Aggancio Destr

151182820
D0486021: RNCC: 3 | RNVC: 2

20 Apr 1995

5340-15-127-5074
Tassello Elastico

151275074
870231: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-102-8082
Testa Di Tirante Fi

151028082
232A1980-401: RNCC: 3 | RNVC: 2

27 Oct 1988

5340-15-148-6685
Access Cover

151486685
1M01766002: RNCC: 3 | RNVC: 2

17 Sep 1998

5340-15-203-2472
Access Door

152032472
156016208: RNCC: 3 | RNVC: 2
(241)AF908156016208: RNCC: 5 | RNVC: 2
156016208: RNCC: 5 | RNVC: 2

11 Dec 2007

5340-15-153-6850
Copiaccesso

151536850
142065810: RNCC: 3 | RNVC: 2

20 Feb 2001

5340-15-219-9213
Seager D.50

152199213
D.50: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-151-6960
Piastra

151516960
0-112523: RNCC: 3 | RNVC: 2

30 Jun 2000

5340-15-144-7443
Dust And Moisture Seal Protective Cap-Plug

151447443
12086285: RNCC: 3 | RNVC: 2

13 Jan 1997

5340-15-148-9236
Double Angle Bracket

151489236
60186059: RNCC: 3 | RNVC: 2

2 Nov 1998

5340-15-107-1726
Hinge Right Hand

151071726
RS412297A: RNCC: 3 | RNVC: 2

24 May 1989

5340-15-207-6244
Guaina Filo Frizion

152076244
1N150560016: RNCC: 3 | RNVC: 2
(241)A23091N150560016: RNCC: 5 | RNVC: 2

5 Nov 2012

5340-15-139-4901
Tassello Gomma

151394901
601740098: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-149-0804
Staffa Maniglia Azi

151490804
20645-29-018: RNCC: 3 | RNVC: 2
20645-29-018: RNCC: 5 | RNVC: 9

23 Nov 1998

5340-15-151-2832
Access Door

151512832
541160200: RNCC: 3 | RNVC: 2
554116020000: RNCC: 5 | RNVC: 2

8 Jun 2000

5340-15-120-8937
Support

151208937
85193: RNCC: 3 | RNVC: 2

4 Sep 1995

5340-15-153-7145
Line Supporting Strap

151537145
142024020: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-112-2667
Helical Compression Spring Seat

151122667
773145: RNCC: 3 | RNVC: 2

30 Apr 1988

5340-15-112-6764
Dust And Moisture Seal Protective Plug

151126764
P1000: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-111-3833
Cernierasagomataspe

151113833
117A1120-401: RNCC: 3 | RNVC: 2

7 Sep 1990

5340-15-136-1012
Cernera

151361012
9062271: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-055-6768
Serie Spessore Regi

150556768
533437: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-061-5813
Cappellotto Bloccag

150615813
4056224: RNCC: 3 | RNVC: 2
4056224: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-204-0198
Attacco

152040198
42540105: RNCC: 3 | RNVC: 2
(241)A120542540105: RNCC: 5 | RNVC: 2

17 Aug 2011

5340-15-147-5809
Pen

151475809
98SM100: RNCC: 3 | RNVC: 2

30 Dec 1997

5340-15-068-1390
Helical Compression Spring Retainer

150681390
8950712304: RNCC: 3 | RNVC: 2
91656353: RNCC: 5 | RNVC: 2

15 Oct 1982

5340-15-118-0864
Control Rod

151180864
D0469360: RNCC: 3 | RNVC: 2

16 Dec 1994

5340-15-064-3749
Threaded End Tensioning Tie Rod

150643749
42034402: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-179-8713
Buckle

151798713
04000091: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-002-2683
Set Of Fasteners

150022683
2000905V0100: RNCC: 3 | RNVC: 2

31 Jul 2013

5340-15-125-4011
Cerniera

151254011
26-6-94-04-01-01B: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-119-9619
Helical Compression Spring Seat

151199619
73691F01: RNCC: 3 | RNVC: 2
73691F01: RNCC: 5 | RNVC: 9

22 May 1996

5340-15-147-8767
Manual Control Lever

151478767
49165: RNCC: 3 | RNVC: 2

18 May 1998

5340-15-187-9300
Dust And Moisture Seal Protective Cap-Plug

151879300
V4201012: RNCC: 3 | RNVC: 2
(241)A4447V4201012: RNCC: 5 | RNVC: 2

1 Jun 2009

5340-15-149-3323
Multiple Angle Bracket

151493323
60143737: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-198-8051
Piastra Di Montaggi

151988051
500387875: RNCC: 3 | RNVC: 2

17 Nov 2004

5340-15-150-1462
Door Catch

151501462
180506: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-113-1179
Collarediserraggio

151131179
2984510: RNCC: 3 | RNVC: 2

9 May 1988

5340-15-051-6709
Turnbuckle

150516709
2A10UNI2018X15CN1808: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-183-9881
Supporto Pannelli

151839881
COMM631022020017: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-006-0135
Anchor Strap

150060135
B512TL154: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-166-4849
Cerniera Maschio

151664849
035411041: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-118-6460
Calotte

151186460
75207696: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-166-4772
Forcella

151664772
10248471: RNCC: 3 | RNVC: 2
10248471: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-154-4906
Hook Pipe Support

151544906
A1000650: RNCC: 3 | RNVC: 2

20 Jun 2001

5340-15-115-0381
Tirantefilettato

151150381
W020403: RNCC: 3 | RNVC: 2
(7001)5340151150381: RNCC: 5 | RNVC: 2

27 Sep 1993

5340-15-008-6186
Cover Plate Access

150086186
8832432: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-009-4015
Fermo

150094015
741710: RNCC: 3 | RNVC: 2

22 Jun 1981

5340-15-150-3909
Dust And Moisture Seal Protective Cap

151503909
M202: RNCC: 3 | RNVC: 2

2 Dec 1999

5340-15-115-7820
Dust And Moisture Seal Protective Plug

151157820
MO4168: RNCC: 3 | RNVC: 2

10 Sep 1993

5340-15-002-5970
Angle Bracket

150025970
504382801: RNCC: 3 | RNVC: 2

4 Sep 2013

5340-15-134-6317
Tassello Elasti

151346317
10008: RNCC: 3 | RNVC: 2
(241)A333410008: RNCC: 4 | RNVC: 1

9 Oct 1996

5340-15-202-7828
Protect Blank Panel

152027828
N651U3133201: RNCC: 3 | RNVC: 2
(241)A0126N651U3133201: RNCC: 5 | RNVC: 2

10 Jul 2007

5340-15-180-3581
Paracolpo In Strisc

151803581
(241)ADA53BP287: RNCC: 3 | RNVC: 2
BP287: RNCC: 3 | RNVC: 2

23 Apr 2008

5340-15-007-7692
Cover Plate Access

150077692
4653282: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-055-4774
Camma Compl

150554774
204-1300-32-1: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-126-4673
Molla

151264673
XS1644: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-106-9627
Complet Leva Rinvio

151069627
1366410: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-141-6937
Molla

151416937
4780108: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-175-1198
Vary Hardware

151751198
B12101-632: RNCC: 3 | RNVC: 2

29 Dec 2003

5340-15-065-8748
Piastrina

150658748
4211272: RNCC: 3 | RNVC: 2
4211272: RNCC: 5 | RNVC: 2
4211272: RNCC: 5 | RNVC: 9

29 Oct 1985

5340-15-156-3645
Hook Plate

151563645
CBD71408P15: RNCC: 3 | RNVC: 2
(241)A3460CBD71408P15: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-155-9308
Flangia

151559308
60181671: RNCC: 3 | RNVC: 2

7 Oct 2002

5340-15-074-4049
Turnbuckle

150744049
2A6UNI20180T60A34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-148-9203
Tampone Anteriore A

151489203
00358: RNCC: 3 | RNVC: 2

2 Nov 1998

5340-15-156-2027
Assy Base

151562027
CBD71155G01: RNCC: 3 | RNVC: 2
(241)A3460CBD71155G01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-207-1076
Rig Extension Assy

152071076
N651U5006101: RNCC: 3 | RNVC: 2

4 Sep 2012

5340-15-120-6498
Corpo Valvola Compl

151206498
D0371320: RNCC: 3 | RNVC: 2

28 Jun 1996

5340-15-119-5421
Piastrina Destra Sp

151195421
D0481797: RNCC: 3 | RNVC: 2

24 Mar 1995

5340-15-156-6572
Threaded End Tensioning Tie Rod

151566572
4239517: RNCC: 3 | RNVC: 2

3 Mar 2003

5340-15-109-7283
Helical Compression Spring Seat

151097283
773358: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-151-6947
Mensola

151516947
0-171985: RNCC: 3 | RNVC: 2

30 Jun 2000

5340-15-001-8303
Angle Bracket

150018303
98190379: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-154-0751
Dust And Moisture Seal Protective Plug

151540751
00113844: RNCC: 3 | RNVC: 2
0-113844: RNCC: 3 | RNVC: 2
1PA39630-113844: RNCC: 5 | RNVC: 2
(241)A39630-113844: RNCC: 5 | RNVC: 2

19 Mar 2001

5340-15-111-2799
Handwheel

151112799
2007TAV4-37: RNCC: 3 | RNVC: 2

10 Apr 1986

5340-15-120-6921
Piastra Tubiera Dis

151206921
D0469677: RNCC: 3 | RNVC: 2

1 May 1996

5340-15-199-5542
Cerniera

151995542
541-01-2630: RNCC: 3 | RNVC: 2
(241)A1140541-01-2630: RNCC: 5 | RNVC: 2

20 Apr 2005

5340-15-063-4941
Cover Plate Access

150634941
752948-11: RNCC: 3 | RNVC: 2
75294811: RNCC: 5 | RNVC: 2
9918140: RNCC: 5 | RNVC: 2
752948-11: RNCC: 5 | RNVC: 9
75294811: RNCC: 5 | RNVC: 9

22 Sep 1979

5340-15-005-6432
Supporto Speciale

150056432
0-15874: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-233-7158
Collare Fissaggio C

152337158
CG00007A: RNCC: 3 | RNVC: 2
GG0005: RNCC: 3 | RNVC: 2
534015E023211: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-139-8060
Tirante Elastico

151398060
1001949: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-166-4919
Maniglione Antipani

151664919
591351002: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-065-2518
Forcella Completa

150652518
590.19545.4: RNCC: 3 | RNVC: 2

30 Mar 1982

5340-15-179-4352
Dust And Moisture Seal Protective Plug

151794352
46186090: RNCC: 3 | RNVC: 2

28 Nov 2006

5340-15-204-4383
Turnbuckle

152044383
24410: RNCC: 3 | RNVC: 2
(241)A293024410: RNCC: 5 | RNVC: 2

7 Nov 2011

5340-15-149-3197
Multiple Angle Bracket

151493197
4886498: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-118-0076
Shaft Retaining Plate

151180076
1S 557971: RNCC: 3 | RNVC: 2
1S 557971: RNCC: 5 | RNVC: 9

28 Jan 1995

5340-15-187-2371
Dispositivo Fissagg

151872371
060424: RNCC: 3 | RNVC: 2
(241)A3593060424: RNCC: 5 | RNVC: 2

27 Feb 2009

5340-15-160-7876
Lucchetto C.

151607876
F720154231: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-139-7224
Chiavistello Di Blo

151397224
A.2854300: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-152-9120
Staffa (1) Accessor

151529120
310866F92: RNCC: 3 | RNVC: 2

7 Nov 2000

5340-15-200-8291
Galleggiante Liv.Co

152008291
2290: RNCC: 3 | RNVC: 2
(241)A49802290: RNCC: 5 | RNVC: 2

9 Mar 2006

5340-15-123-6681
Tampone Ammortizzan

151236681
50X60X300: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-204-1855
Preassieme Barra

152041855
195531821: RNCC: 3 | RNVC: 2
(241)A0199195531821: RNCC: 5 | RNVC: 2

21 Sep 2011

5340-15-174-6889
Assieme Gancio

151746889
009A4808-801: RNCC: 3 | RNVC: 2

17 Sep 2003

5340-15-147-5800
T-Fitting

151475800
98RV903: RNCC: 3 | RNVC: 2

30 Dec 1997

5340-15-136-2599
Tappo

151362599
61239348: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-112-2665
Helical Compression Spring Seat

151122665
773143: RNCC: 3 | RNVC: 2

30 Apr 1988

5340-15-205-3810
Angle Bracket

152053810
538-001-00081: RNCC: 3 | RNVC: 2

6 Mar 2012

5340-15-137-1532
Piastrina

151371532
47-642-114-1: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-148-6695
Screw Threa Insert

151486695
M8X1X1D: RNCC: 3 | RNVC: 2
210602508: RNCC: 5 | RNVC: 2

17 Sep 1998

5340-15-020-3107
Access Cover Plate

150203107
02-094G01-10: RNCC: 3 | RNVC: 2
55.45.002.A: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-204-6876
Turnbuckle

152046876
MR3536FE539: RNCC: 3 | RNVC: 2
(241)AG622MR3536FE539: RNCC: 5 | RNVC: 2

12 Dec 2011

5340-15-118-8044
Helical Compression Spring Seat

151188044
9017207: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-199-4993
Nut And Bolt Locking Plate

151994993
74646F01: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-15-195-8543
Threaded End Tensioning Tie Rod

151958543
A9062920074: RNCC: 3 | RNVC: 2
(241)AJ611A9062920074: RNCC: 5 | RNVC: 2

23 May 2011

5340-15-060-8280
Helical Compression Spring Retainer

150608280
H50B9: RNCC: 5 | RNVC: 2
H50B9: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-020-1757
Dust And Moisture Seal Protective Plug

150201757
01-231H11: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-112-8401
Headless Grooved Rod

151128401
471152: RNCC: 3 | RNVC: 2
D0471152: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-151-9441
Staffa

151519441
0-174614: RNCC: 3 | RNVC: 2

26 Jul 2000

5340-15-102-8080
Testa Di Tirante Fi

151028080
232A3029-401: RNCC: 3 | RNVC: 2

27 Oct 1988

5340-15-235-4978
Coperchio

152354978
01144103: RNCC: 3 | RNVC: 2
534015E156856: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-143-3029
Tappo Irf

151433029
010-269196: RNCC: 3 | RNVC: 2
691016: RNCC: 3 | RNVC: 2

11 Dec 1996

5340-15-003-9398
Nut And Bolt Locking Plate

150039398
182704220: RNCC: 3 | RNVC: 2
(241)A0199182704220: RNCC: 5 | RNVC: 2

4 Dec 2013

5340-15-065-6265
Poignee Speciale

150656265
541-60-1010: RNCC: 3 | RNVC: 2

1 Apr 1998

5340-15-180-8541
Nut And Bolt Retainer

151808541
J57150340-007: RNCC: 3 | RNVC: 2

29 Jul 2008

5340-15-137-2502
Mezza

151372502
775043-25: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-186-2926
Gancio A Occhio Per

151862926
GANCIO A OCCHIO: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-123-7052
Raccordo Misto

151237052
1626B/6,3: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-194-3951
Impeller Retainer

151943951
KL41AAV: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-15-152-2160
Tassello Gomma

151522160
60156862: RNCC: 3 | RNVC: 2

10 Aug 2000

5340-15-152-6765
Piastrina

151526765
0-179824: RNCC: 3 | RNVC: 2

10 Oct 2000

5340-15-116-8495
Cilindro T.O Stelo

151168495
D1402598: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-15-116-8530
Coperchio Attacco L

151168530
D0469841: RNCC: 3 | RNVC: 2

6 Apr 1994

5340-15-068-2649
Piastrina Alluminio

150682649
CF 440 798 A: RNCC: 3 | RNVC: 2

27 Oct 1984

5340-15-062-8744
Anello Speciale

150628744
0-42590: RNCC: 3 | RNVC: 2

9 Feb 1982

5340-15-074-4252
Turnbuckle

150744252
2D20UNI2019AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-127-1023
Squadretta Posterio

151271023
398343: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-001-5488
Stand Base

150015488
182719586: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-15-153-7351
Headless Straight Rod

151537351
142057184: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-007-7597
Soffietto Speciale

150077597
0-06012: RNCC: 3 | RNVC: 2

23 Apr 1980

5340-15-007-3758
Leva Speciale

150073758
0-34071: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-006-2428
Disco Speciale

150062428
0-33645: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-151-7096
Staffa

151517096
0-179947: RNCC: 3 | RNVC: 2

3 Jul 2000

5340-15-106-2549
Sostegno El Piastra

151062549
0-49980: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-221-7550
Chiudiporta A Bracc

152217550
CHIUDIPORTAMAB: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-063-0612
Cerniera Speciale

150630612
0-100431: RNCC: 3 | RNVC: 2

30 Apr 1982

5340-15-006-2413
Disco Appoggio Spec

150062413
0-08986: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-220-8526
Tasselli Da 6 Pezzi

152208526
TASSELLI6: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-139-0926
Supporto Speciale

151390926
2435673: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-215-4054
Manico Per Limette

152154054
194M0000: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-212-3590
Cilindro Per Serrat

152123590
SECE58: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-114-7304
Cannotto

151147304
D0491133: RNCC: 3 | RNVC: 2

30 Jul 1992

5340-15-188-6488
Guide Clip

151886488
CBD71612P01: RNCC: 3 | RNVC: 2
(241)A3460CBD71612P01: RNCC: 5 | RNVC: 2

20 Oct 2009

5340-15-074-4448
Turnbuckle

150744448
1C6UNI20210T60-2012A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-206-2928
Dust And Moisture Seal Protective Plug

152062928
58621: RNCC: 3 | RNVC: 2
58621: RNCC: 5 | RNVC: 2

1 Jun 2012

5340-15-163-1613
Support

151631613
9612569680: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-152-5124
Resilient Mount

151525124
60136991: RNCC: 3 | RNVC: 2

19 Sep 2000

5340-15-110-6391
Double Angle Bracket

151106391
67660540: RNCC: 3 | RNVC: 2
0-111257: RNCC: 5 | RNVC: 2

16 Mar 1990

5340-15-153-7153
Line Supporting Strap

151537153
142024035: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-001-5726
Angle Bracket

150015726
ECBRAHCLSR01: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-198-9494
Dust And Moisture Seal Protective Cap-Plug

151989494
11501074: RNCC: 3 | RNVC: 2
(241)AB16111501074: RNCC: 5 | RNVC: 2

9 Dec 2004

5340-15-002-1439
Packaging Container Fastener

150021439
42566938: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-153-9213
Handwheel

151539213
121122129: RNCC: 2 | RNVC: 3

12 Mar 2001

5340-15-105-6007
Staffa A Gomito

151056007
8983790: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-005-6923
Piastrina Speciale

150056923
0-33657: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-007-6955
Cover Plate Access

150076955
1141-39-904: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-074-4276
Turnbuckle

150744276
1A76UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-177-6542
Clamp

151776542
00090526: RNCC: 3 | RNVC: 2

4 Jun 2004

5340-15-063-6236
Eye Hook

150636236
4735448: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-120-9290
Semicerniera

151209290
113A6022-754: RNCC: 3 | RNVC: 2

5 Sep 1995

5340-15-127-0849
Molla

151270849
347464: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-220-0841
Bracket Assy

152200841
277A0138-409: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-150-1655
Supporto Speciale

151501655
4759: RNCC: 3 | RNVC: 2

2 Sep 1999

5340-15-213-8770
Cerniera Con Costa

152138770
CERNIERA120MM: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-208-9141
Tassello

152089141
0352: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-153-5177
Dust And Moisture Seal Protective Plug

151535177
142011187: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-005-4995
Braket Assy (C130j)

150054995
23068878: RNCC: 3 | RNVC: 2

9 Dec 2013

5340-15-148-7342
Scodellino Molla El

151487342
93159605: RNCC: 3 | RNVC: 2

4 Aug 1999

5340-15-074-4191
Turnbuckle

150744191
1B16UNI2019A35UNI663: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-215-0275
Ruota Girevole

152150275
656604: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-074-4238
Turnbuckle

150744238
1D12UNI2019A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-181-6113
Gancio Moschetto

151816113
8019: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-209-4937
Padlock

152094937
LU: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-199-8059
Protezione Per Albe

151998059
D0563892: RNCC: 3 | RNVC: 2
(241)A0461D0563892: RNCC: 5 | RNVC: 2

7 Jun 2005

5340-15-212-6838
Ruote Girevoli

152126838
DIA125XBOX: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-127-4893
Molla Rich. Leva Fr

151274893
857808: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-149-6085
Flange

151496085
518-04-2040: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-207-0498
Dust And Moisture Seal Protective Cover

152070498
10071860-101: RNCC: 3 | RNVC: 2
(241)A081010071860-101: RNCC: 5 | RNVC: 2

27 Aug 2012

5340-15-221-3926
Lucchetto Iseo 40

152213926
ISEO40: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-118-0891
Resilient Mount

151180891
D0488402: RNCC: 3 | RNVC: 2

20 Dec 1994

5340-15-162-0332
Body

151620332
291A09010-115: RNCC: 3 | RNVC: 2

15 Nov 2000

5340-15-105-8179
Sostegno Elastico

151058179
23412: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-007-1967
Nut And Bolt Locking Plate

150071967
1385137: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-170-2600
Handle Right

151702600
79050880: RNCC: 3 | RNVC: 2
(241)AD75179050880: RNCC: 5 | RNVC: 2
79050880: RNCC: 5 | RNVC: 2

12 Nov 2002

5340-15-217-0049
Serratura Di Sicure

152170049
DU0038: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-118-9977
Dust And Moisture Seal Protective Plug

151189977
9817810: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-111-7964
Double Angle Bracket

151117964
00080167: RNCC: 3 | RNVC: 2

1 Jul 1990

5340-15-065-9651
Dust And Moisture Seal Protective Cap

150659651
65110090: RNCC: 3 | RNVC: 2

29 Oct 1982

5340-15-139-2702
Lucchetto Mm.30

151392702
110.30: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-204-3232
Testa

152043232
0000500429839: RNCC: 3 | RNVC: 2
(241)A39630000500429839: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-110-5764
Coperchio Accesso

151105764
1R 533799: RNCC: 3 | RNVC: 2
1R 533799: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-163-1374
Support

151631374
99450666: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-125-4367
Supporto Cambio Fia

151254367
7628196: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-051-4106
Anello

150514106
4006236: RNCC: 3 | RNVC: 2
4006236: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-068-5794
Vent Plug

5340-15-068-5788
Nut And Bolt Locking Plate

5340-15-212-1012
Chiavi Grezze

152121012
CHIAVI 080: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-179-2925
Joystick

151792925
183520012: RNCC: 3 | RNVC: 2

16 Oct 2006

5340-15-000-4808
Sealing Plug Assembly

150004808
71406271: RNCC: 3 | RNVC: 2
71406271: RNCC: 5 | RNVC: 2

11 Mar 2013

5340-15-179-5673
Utility Resilient Mount

151795673
HPBF08: RNCC: 3 | RNVC: 2

11 Apr 2007

5340-15-112-8514
Supporto

151128514
471869: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-068-3572
Dust And Moisture Seal Protective Cap-Plug

150683572
659124105: RNCC: 3 | RNVC: 2

27 Oct 1984

5340-15-074-4048
Turnbuckle

150744048
2A80UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-074-4190
Turnbuckle

150744190
1B12UNI2019A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-074-4207
Turnbuckle

150744207
2B30UNI2019AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-074-4319
Turnbuckle

150744319
1B72UNI20202N: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-075-3513
Turnbuckle

150753513
3013642: RNCC: 3 | RNVC: 2
3021517: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-169-1149
Padlock

151691149
F72006533: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-163-2385
Plug

151632385
9930056: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-217-6904
Chiave Sottolavabo

152176904
99374: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-200-4543
Fascetta 380 Mm

152004543
FS380CW-C: RNCC: 3 | RNVC: 2
(241)A3445FS380CW-C: RNCC: 5 | RNVC: 2

23 Jan 2006

5340-15-113-9387
Capsula A Sfera A S

151139387
1609.10: RNCC: 3 | RNVC: 2

10 May 1993

5340-15-009-3820
Listello Per Gomme

150093820
2-7-0250: RNCC: 3 | RNVC: 2

22 Jun 1981

5340-15-206-6858
Angle Bracket

152066858
07-10-1310-25-F: RNCC: 3 | RNVC: 2
07-10-1310-25-F: RNCC: 5 | RNVC: 2

2 Jul 2012

5340-15-151-2737
Stand Base (1)

151512737
3202337: RNCC: 3 | RNVC: 2
553202337000: RNCC: 5 | RNVC: 2

8 Jun 2000

5340-15-106-6966
Alime Morsetto Tubi

151066966
000.6200.0: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-145-0539
Manual Control Lever

151450539
6350960410: RNCC: 3 | RNVC: 2

4 Aug 1997

5340-15-158-0337
Handwheel

151580337
60304E003101: RNCC: 3 | RNVC: 2

15 Dec 2003

5340-15-170-9278
Disc Plates Sae 21

151709278
6110611070: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-153-6565
Speci Chiavistello

151536565
142041249: RNCC: 1 | RNVC: 3

20 Feb 2001

5340-15-064-6546
Fixing To Tower

150646546
74831: RNCC: 3 | RNVC: 2

9 May 1984

5340-15-120-8918
Support

151208918
85194: RNCC: 3 | RNVC: 2

4 Sep 1995

5340-15-175-8800
Serratura Foro Yale

151758800
PS3020445: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-156-3378
Trasportatore

151563378
(241)A3460CBD71237P01: RNCC: 3 | RNVC: 2
CBD71237P01: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-15-187-1837
Elemento Fisso Cine

151871837
SC 100 726: RNCC: 3 | RNVC: 2
(241)A3980SC100726: RNCC: 5 | RNVC: 2

24 Feb 2009

5340-15-112-2262
Fascetta Per Tubo

151122262
41610007A: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-166-4832
Fascetta

151664832
300241: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-195-8074
Dust And Moisture Seal Protective Plug

151958074
202703: RNCC: 3 | RNVC: 2
(241)AJ611202703: RNCC: 5 | RNVC: 2

16 May 2011

5340-15-006-5746
Piastra Distanziale

150065746
000202159100: RNCC: 5 | RNVC: 2
000202159100: RNCC: 5 | RNVC: 9

8 Jan 1982

5340-15-189-7912
Kit Antivibrante

151897912
11100072: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-211-8446
Blocchetto Tondo Da

152118446
0834507: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-187-2261
Single Vent Plug(Re

151872261
32153001D40: RNCC: 3 | RNVC: 2

26 Feb 2009

5340-15-051-3686
Tassello

150513686
737444: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-235-4362
Serratura Da Infila

152354362
01530000: RNCC: 3 | RNVC: 2
534015E075476: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-110-3960
Elementi Graffette

151103960
14184371: RNCC: 3 | RNVC: 2
14184371: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-136-9075
Anello Ritegno Olio

151369075
STD1549: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-119-3465
Pressacavo Speciale

151193465
992114285M: RNCC: 3 | RNVC: 2

11 Feb 2000

5340-15-193-3906
Piastra Di Montaggi

151933906
504293400: RNCC: 3 | RNVC: 2
(241)A4249504293400: RNCC: 5 | RNVC: 2

11 May 2010

5340-15-195-1659
Spring Tension Clip

151951659
ED0011650360-S: RNCC: 3 | RNVC: 2

4 Mar 2011

5340-15-206-8213
Dust And Moisture Seal Protective Cap-Plug

152068213
ED0090000780-S: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-111-8756
Dust And Moisture Seal Protective Cap

151118756
43550.7: RNCC: 3 | RNVC: 2

8 Oct 1993

5340-15-209-5686
Spuntone Con Occhie

152095686
SPUNTONE: RNCC: 3 | RNVC: 2

16 Nov 2005

Load More Results