What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 45 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 45 of 72

5340-15-138-2894
Lucchetto Ad Arco M

151382894
4117: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-108-0897
Shockabsorber

151080897
1999917028G: RNCC: 3 | RNVC: 2
1999917028G: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-005-6648
Dust And Moisture Seal Protective Cap-Plug

150056648
4129638: RNCC: 3 | RNVC: 2
4129638: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-122-5037
Cover Blank

151225037
01TL21884: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-074-4090
Turnbuckle

150744090
2B72UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-193-0714
Tirante

151930714
CSS-100-2: RNCC: 3 | RNVC: 2
(241)AA003CSS-100-2: RNCC: 5 | RNVC: 2

12 Apr 2010

5340-15-150-9749
Anello Di Centragg

151509749
781505: RNCC: 3 | RNVC: 2
93193546: RNCC: 5 | RNVC: 2

17 Feb 2000

5340-15-106-3236
Staffa

151063236
1367763: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-009-5841
Resilient Mount

150095841
72144310: RNCC: 3 | RNVC: 2
9982355: RNCC: 5 | RNVC: 2
72144310: RNCC: 5 | RNVC: 9

22 Sep 1979

5340-15-179-3609
Slide

151793609
C00009: RNCC: 3 | RNVC: 2

28 Nov 2006

5340-15-151-4577
Fermo Per Piede Di

151514577
UOHF0180000: RNCC: 3 | RNVC: 2

29 May 2000

5340-15-178-7778
Dust And Moisture Seal Protective Plug

151787778
048634: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-115-6984
Contenitore Cartucc

151156984
D0470611: RNCC: 3 | RNVC: 2

10 Mar 1994

5340-15-061-3779
Staffa Sagomata Spe

150613779
P26CA103: RNCC: 5 | RNVC: 2
P26CA103: RNCC: 5 | RNVC: 9

22 Sep 1977

5340-15-120-8467
Qu Fastener

151208467
PNU1: RNCC: 3 | RNVC: 2

4 Sep 1995

5340-15-206-2561
Dust And Moisture Seal Protective Plug

152062561
SPLT30002: RNCC: 3 | RNVC: 2
SPLT30002: RNCC: 5 | RNVC: 2

1 Jun 2012

5340-15-055-6783
Staffa Fissaggio Tu

150556783
540195: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-195-0123
Compl Antivibrante

151950123
KIT7002LA: RNCC: 3 | RNVC: 2
(241)A2437KIT7002LA: RNCC: 5 | RNVC: 2

16 Feb 2011

5340-15-152-3802
Special Bolt

151523802
J32840363-001: RNCC: 3 | RNVC: 2

6 Sep 2000

5340-15-156-2019
Locking Base Assy

151562019
(241)A3460CBD71171G01: RNCC: 3 | RNVC: 2
CBD71171G01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-105-8739
Attacco Cinghia

151058739
12.512.722: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-150-3766
Staffa Sostegno Pos

151503766
60116204: RNCC: 3 | RNVC: 2

7 Oct 1999

5340-15-009-0682
Latch Set

150090682
8273702: RNCC: 3 | RNVC: 2

27 Aug 1979

5340-15-120-6873
Barretta In Sicovin

151206873
D0471519: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-119-7899
Right Support

151197899
70662606: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-127-1145
Staffa Per Squadra

151271145
600787: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-116-9679
Elastic Clamp

151169679
B515MCB035: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-118-0515
Piastra Di Collegam

151180515
D0488468: RNCC: 3 | RNVC: 2

5 Dec 1994

5340-15-117-2012
Blocco Di Fermo Spe

151172012
190518111: RNCC: 3 | RNVC: 2

2 Sep 1993

5340-15-110-7905
Anellometallico

151107905
86424-001A01: RNCC: 3 | RNVC: 2
86424-001A1: RNCC: 5 | RNVC: 2

20 Apr 1988

5340-15-127-2248
Molla Di Richiamo C

151272248
1740-63-014: RNCC: 3 | RNVC: 2
1740-63-014: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-105-5994
Staffa A Gomito

151055994
277-8505-36: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-209-1114
Post Elec-Mech

152091114
540-9734-003: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-112-1144
Sostegnoe

151121144
H160-267-110-135-8FF: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-005-2194
Threaded End Tensioning Tie Rod

150052194
554132246000: RNCC: 2 | RNVC: 3
541-32-2460: RNCC: 3 | RNVC: 2

16 Sep 1980

5340-15-109-1246
Rubber Bumper

151091246
38557659: RNCC: 3 | RNVC: 2

30 Apr 1988

5340-15-119-1601
Helical Compression Spring Seat

151191601
75208233: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-119-7385
Support Ass

151197385
01TL23341: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-119-3837
Resilient Mount

151193837
60170046: RNCC: 3 | RNVC: 2

25 Jul 1994

5340-15-116-4842
Helical Compression Spring Seat

151164842
4833069: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-061-5244
Dust And Moisture Seal Protective Cap

150615244
000200318400: RNCC: 5 | RNVC: 2
000200318400: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-127-2717
Molla Richiamo Peda

151272717
709733: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-061-5583
Electrical-Me Post

150615583
140C1A64: RNCC: 5 | RNVC: 2
140C1A64: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-120-6786
Piastra Supporto Mo

151206786
D0491811: RNCC: 3 | RNVC: 2

10 Jul 1996

5340-15-114-7493
Bond

151147493
301110G1: RNCC: 3 | RNVC: 2

4 Aug 1992

5340-15-200-3435
Special Protezione

152003435
587000001500: RNCC: 3 | RNVC: 2

14 Dec 2005

5340-15-106-7301
Serratura

151067301
10484000: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-156-3593
Support Angular

151563593
(241)A3460CBD71443P01: RNCC: 3 | RNVC: 2
CBD71443P01: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-112-8479
Sedepers

151128479
467672: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-196-9905
Padlock

151969905
PN UAS 00035829: RNCC: 3 | RNVC: 2
5340F76030992: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-003-7530
Dust And Moisture Seal Protective Cover

150037530
00045: RNCC: 3 | RNVC: 2

20 Nov 2013

5340-15-148-6562
Butt Hinge (1)

151486562
190525189: RNCC: 3 | RNVC: 2

17 Sep 1998

5340-15-177-7290
Attacco Superiore C

151777290
504089535: RNCC: 3 | RNVC: 2

5 Jun 2004

5340-15-166-5033
Bracket

151665033
311A2510020: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-006-6736
Fastener

150066736
3DB109M: RNCC: 3 | RNVC: 2
3DB109M: RNCC: 5 | RNVC: 2

24 Nov 1979

5340-15-149-6289
Guide

151496289
898MC0006: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-115-6115
Spec Tappo Di Sfogo

151156115
D0471916: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-105-8173
Sostegno Elastico

151058173
85909: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-156-2140
Support

151562140
(241)A3460CBD71173P02: RNCC: 3 | RNVC: 2
CBD71173P02: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-113-8565
Threaded End Tensioning Tie Rod

151138565
1Z 584387: RNCC: 3 | RNVC: 2
1Z 584387: RNCC: 5 | RNVC: 9

13 Jun 1994

5340-15-001-4238
Dust And Moisture Seal Protective Cap-Plug

150014238
182702276: RNCC: 3 | RNVC: 2

2 Jul 2013

5340-15-000-1355
Dust And Moisture Seal Protective Cap-Plug Set

150001355
N635G1103202: RNCC: 3 | RNVC: 2

30 Jan 2013

5340-15-119-7876
Mechanic Equipment Hardware Kit

151197876
75206996: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-112-4259
Plate Support

151124259
122TE2006-2: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-111-3830
Cernierasagomataspe

151113830
117A2120-402: RNCC: 3 | RNVC: 2

7 Sep 1990

5340-15-219-4402
Kit Accessori Permo

152194402
0715660920: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-220-6426
Catena Zincata

152206426
CAT-ZIN: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-213-8766
Serratura Da Infila

152138766
44461-80: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-209-5677
Inserto Avvitatore

152095677
TAGLIO: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-179-9193
Retainer

151799193
44000248: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-191-6363
Latch Assemly

151916363
H3267-3: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-149-5312
Stand Base (1)

151495312
112746143: RNCC: 3 | RNVC: 2

14 Jan 2000

5340-15-067-9521
Portella Fissa

150679521
53.219: RNCC: 3 | RNVC: 2

8 Jul 1986

5340-15-169-0290
Padlock

151690290
F72005310: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-154-1658
Assieme Attrezzatur

151541658
A-A133640-1/8: RNCC: 3 | RNVC: 2

27 Mar 2001

5340-15-102-5900
Helical Compression Spring Retainer

151025900
69900: RNCC: 3 | RNVC: 2

4 Mar 1993

5340-15-156-3697
Support Bracket

151563697
(241)A3460CBD71329P03: RNCC: 3 | RNVC: 2
CBD71329P03: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-112-8374
Premig

151128374
466779: RNCC: 3 | RNVC: 2
(241)A0461466779: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-117-4070
Corpo Rubinetto Con

151174070
D0366493: RNCC: 3 | RNVC: 2

6 Apr 1994

5340-15-103-1874
Piastrina Di Sicure

151031874
DE013.09.822: RNCC: 3 | RNVC: 2
(241)A5015DE013.09.822: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-122-5891
Helical Compression Spring Seat

151225891
79951F01: RNCC: 3 | RNVC: 2

10 Sep 1996

5340-15-179-3152
Handwheel

151793152
77521: RNCC: 3 | RNVC: 2
VR.180FP+I: RNCC: 3 | RNVC: 2

16 Oct 2006

5340-15-152-3620
Piastrina

151523620
0-153401: RNCC: 3 | RNVC: 2
00153401: RNCC: 3 | RNVC: 2
(241)A39630-153401: RNCC: 5 | RNVC: 2
(241)A396300153401: RNCC: 5 | RNVC: 2

4 Sep 2000

5340-15-151-9830
Staffa

151519830
0-153322: RNCC: 3 | RNVC: 2

31 Jul 2000

5340-15-152-3939
Chiavistello

151523939
9514077: RNCC: 3 | RNVC: 2
0-119755: RNCC: 5 | RNVC: 2
9514077: RNCC: 5 | RNVC: 2

6 Sep 2000

5340-15-153-1246
Dust And Moisture Seal Protective Cap-Plug

151531246
44200000058/5: RNCC: 3 | RNVC: 2

27 Nov 2000

5340-15-137-1376
Boccola

151371376
10299242: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-116-9261
Support Copie

151169261
MH606: RNCC: 3 | RNVC: 2
91700954: RNCC: 5 | RNVC: 2

28 Jul 1993

5340-15-231-1142
Lucchetto Corazzato

152311142
4017: RNCC: 3 | RNVC: 2
534015E089898: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-211-6463
Tampone Abrasivo Bl

152116463
3M69608: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-164-0220
Escutcheon Plate

151640220
7762226: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-206-3216
Kit Hook 40 Gps

152063216
88880119: RNCC: 3 | RNVC: 2
(241)A108388880119: RNCC: 5 | RNVC: 2

4 Jun 2012

5340-15-122-5496
Locati Pin

151225496
01TL21271: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-122-2671
Caoutchouc

151222671
800041874: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-198-8170
Semicerniera

151988170
142024291: RNCC: 3 | RNVC: 2

18 Nov 2004

5340-15-151-0458
Chiusura

151510458
001243387: RNCC: 3 | RNVC: 2
0-115034: RNCC: 5 | RNVC: 2

2 Mar 2000

5340-15-202-6580
Dashpot

152026580
C6757050: RNCC: 3 | RNVC: 2
(241)A1508C6757050: RNCC: 5 | RNVC: 2
03 10 350 102/800 N: RNCC: 5 | RNVC: 2

12 Jun 2007

5340-15-186-2225
Serratura Da Infila

151862225
MM70-MM22-SC: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-110-1428
Supporto Cerniera C

151101428
13750-101: RNCC: 3 | RNVC: 2
13750-101: RNCC: 5 | RNVC: 9

11 Mar 1990

5340-15-147-5171
Assieme Adattatore

151475171
20381-002: RNCC: 5 | RNVC: 2
20381-002: RNCC: 5 | RNVC: 9
20381-002: RNCC: 5 | RNVC: 9

12 Dec 1997

5340-15-120-6404
Handwheel

151206404
D0370408: RNCC: 3 | RNVC: 2

30 Apr 1996

5340-15-101-7820
Fascetta Speciale

151017820
SC32674.53: RNCC: 3 | RNVC: 2

21 Jul 1987

5340-15-112-8307
Fodera

151128307
467175: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-166-5119
Maniglia Completa

151665119
0707722: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-127-5401
Piastrina Elastica

151275401
880673: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-166-4964
Staffa (Cannone Vul

151664964
7230097308: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-137-4124
Distanziale

151374124
A59270: RNCC: 3 | RNVC: 2
A59270: RNCC: 5 | RNVC: 9

9 Oct 1996

5340-15-200-1593
Shock Mount Pad

152001593
051131: RNCC: 3 | RNVC: 2
(241)A3593051131: RNCC: 5 | RNVC: 2

11 Oct 2005

5340-15-156-2004
Base

151562004
CBD71158P01: RNCC: 3 | RNVC: 2
(241)A3460CBD71158P01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-154-1786
Fermo

151541786
130754-1: RNCC: 3 | RNVC: 2

27 Mar 2001

5340-15-058-6128
Rubber Bumper

150586128
4-17515C: RNCC: 5 | RNVC: 2
4-17515C: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-062-7916
Stripper Waxed Thre

150627916
0-34166: RNCC: 3 | RNVC: 2

28 Aug 1982

5340-15-200-3465
Tagliente Dx

152003465
70099352: RNCC: 3 | RNVC: 2
(241)AD75170099352: RNCC: 5 | RNVC: 2
70099352: RNCC: 5 | RNVC: 2

14 Dec 2005

5340-15-193-6468
Stand Base

151936468
163108120: RNCC: 3 | RNVC: 2
163108120: RNCC: 5 | RNVC: 2
(241)A0199163108120: RNCC: 5 | RNVC: 2
5340PL1035209: RNCC: 6 | RNVC: 9

28 Jun 2010

5340-15-114-1085
Forcella Con Vite

151141085
2017CGB50/2011: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-15-005-3871
Dust And Moisture Seal Protective Plug

150053871
A83244-11: RNCC: 3 | RNVC: 2

12 Feb 1979

5340-15-147-8724
Disque A Oreille

151478724
120361: RNCC: 3 | RNVC: 2

18 May 1998

5340-15-061-3140
Resilient Mount

150613140
4-27-09172-005: RNCC: 5 | RNVC: 2
4-27-09172-005: RNCC: 5 | RNVC: 9

26 Jun 1978

5340-15-112-2888
Testa Di Tirante

151122888
211A7188-001: RNCC: 3 | RNVC: 2

10 Apr 1991

5340-15-122-5503
Brak Pivot

151225503
01TL21267: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-176-8207
Tassello Di Nylon C

151768207
FU8X50V: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-105-6035
Staffa A Gomito

151056035
V.1122: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-006-2550
Guida Speciale

150062550
0-33931: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-110-5761
Coperchio Accesso

151105761
1R 537061: RNCC: 3 | RNVC: 2
1R 537061: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-156-1689
Supporto Idroguida

151561689
60171559: RNCC: 3 | RNVC: 2

11 Dec 2002

5340-15-118-0440
Blocchetto Cilindri

151180440
D0487150: RNCC: 3 | RNVC: 2
487150: RNCC: 3 | RNVC: 2

14 Dec 1994

5340-15-062-6433
Reattore Per Lampad

150626433
P79D1279-3: RNCC: 3 | RNVC: 2
P79D1279-3: RNCC: 5 | RNVC: 9

28 Aug 1982

5340-15-213-4438
Cilindro Corbin

152134438
PC5004009: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-156-2022
Assy Base

151562022
(241)A3460CBD71143G01: RNCC: 3 | RNVC: 2
CBD71143G01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-153-8902
Seat Pipe Support

151538902
71917F01: RNCC: 3 | RNVC: 2

9 Mar 2001

5340-15-120-6853
Tel Piastra Di Base

151206853
D0484691: RNCC: 3 | RNVC: 2

1 May 1996

5340-15-110-3758
Handwheel

151103758
VR375FP+IR: RNCC: 3 | RNVC: 2
91628211: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-203-9703
Perno Eccentrico +

152039703
22500669: RNCC: 3 | RNVC: 2
(241)A486722500669: RNCC: 5 | RNVC: 2

29 Jul 2011

5340-15-112-6752
Folding Stay

151126752
SE1929: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-178-2927
Anode Retaining Plug

151782927
1Z593278-22: RNCC: 3 | RNVC: 2
1Z593278-22: RNCC: 5 | RNVC: 9

29 Apr 2005

5340-15-119-6742
Dust And Moisture Seal Protective Cap-Plug

151196742
GPN600-B613: RNCC: 3 | RNVC: 2
GPN600B613: RNCC: 5 | RNVC: 2

19 Oct 1994

5340-15-156-4792
Dust And Moisture Seal Protective Plug

151564792
0-121384: RNCC: 3 | RNVC: 2
(241)A39630-121384: RNCC: 5 | RNVC: 2
1PA39630-121384: RNCC: 5 | RNVC: 2

13 Feb 2003

5340-15-220-1199
Serratura Agb

152201199
ART44: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-152-1166
Tassello Gomma

151521166
60159281: RNCC: 3 | RNVC: 2

7 Aug 2000

5340-15-217-5596
Fascetta

152175596
EXRI7902161: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-120-8317
Hinge

151208317
2FM404: RNCC: 3 | RNVC: 2

4 Sep 1995

5340-15-176-1436
Lucchetto Ottone 28

151761436
L.010.50.00: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-054-3251
Piastrina

150543251
523166: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-113-2990
Supporto

151132990
1Z 591503: RNCC: 3 | RNVC: 2
1Z 591503: RNCC: 5 | RNVC: 9

10 Dec 1993

5340-15-112-8385
Controf

151128385
466842: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-215-0630
Maniglia Per Estint

152150630
MANIGLIAPERESTINTORE: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-105-6350
Collare Serraggio

151056350
553666: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-120-6902
Portaregolazione Pe

151206902
D0470790: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-105-6300
Collare Serraggio

151056300
890074: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-105-6369
Collare Serraggio

151056369
10292391: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-206-0565
Sgabello Porta Armi

152060565
Y102: RNCC: 3 | RNVC: 2
(241)A6046Y102: RNCC: 5 | RNVC: 2

14 May 2012

5340-15-136-9072
Heli Coil

151369072
STD1164: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-220-5445
Tassello Nylon L.8

152205445
TASSELLONYL8L: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-108-4771
Doorlock

151084771
72210/2: RNCC: 3 | RNVC: 2

19 Jul 1989

5340-15-120-3488
Double Angle Bracket

151203488
60175325: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-154-3598
Helical Compression Spring Seat

151543598
107187628001: RNCC: 3 | RNVC: 2

8 May 2001

5340-15-155-1367
Resilient Mount

151551367
142068162: RNCC: 2 | RNVC: 3

18 Jan 2002

5340-15-205-2712
Dust And Moisture Seal Protective Cover

152052712
D1-27024-005: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-149-4347
Trapezio Superiore

151494347
51450-S10-020: RNCC: 3 | RNVC: 2

1 Mar 1999

5340-15-116-4972
Dust And Moisture Seal Protective Plug

151164972
98441226: RNCC: 3 | RNVC: 2
98441226: RNCC: 5 | RNVC: 2
155011: RNCC: 5 | RNVC: 2

20 May 1993

5340-15-101-3006
Hinge Half

151013006
P-135182-001: RNCC: 3 | RNVC: 2
P135182-001: RNCC: 5 | RNVC: 2

30 Jan 1988

5340-15-179-6214
Fixture Alignment R

151796214
P-892558-462: RNCC: 3 | RNVC: 2

17 May 2007

5340-15-206-8804
Dust And Moisture Seal Protective Plug

152068804
21772107F: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-110-8414
Nut And Bolt Locking Plate

151108414
772567: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-177-3954
Headless Straight Rod

151773954
037987: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-207-2082
Headless Straight Rod

152072082
SF260-02-10-13: RNCC: 3 | RNVC: 2

24 Sep 2012

5340-15-147-0022
Tacchetto Di Guida

151470022
HF054: RNCC: 3 | RNVC: 2

4 Sep 1997

5340-15-218-2100
Barra Filettata Fip

152182100
9127: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-105-8139
Turnbuckle Body

151058139
38815719: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-074-4320
Turnbuckle

150744320
1B76UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-215-7101
Fascetta

152157101
731763: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-198-4247
Dust And Moisture Seal Protective Plug

151984247
122512137: RNCC: 3 | RNVC: 2

27 Sep 2004

5340-15-108-0654
Boss Guide

151080654
01TL23164: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-188-9183
Piastrina Con Spine

151889183
D1316344: RNCC: 3 | RNVC: 2
(241)A0461D1316344: RNCC: 5 | RNVC: 2

16 Dec 2009

5340-15-121-7351
Clamp

151217351
1576-18-293: RNCC: 3 | RNVC: 2

6 Jul 2000

5340-15-122-9224
Inserto

151229224
80-005-2-6: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-181-3740
Paracolpo Gomma

151813740
07-10-9040-1: RNCC: 3 | RNVC: 2
(241)A498007-10-9040-1: RNCC: 5 | RNVC: 2

10 Dec 2008

5340-15-061-9362
Blocchetto Sedile

150619362
A1-23436-001: RNCC: 3 | RNVC: 2

16 Nov 1984

5340-15-001-5752
Liquid Holding Unit Filler Neck

150015752
20.568.06: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-121-5945
Staffa Di Attacco P

151215945
AN743-6: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-200-4880
Assieme Ritegno Cop

152004880
N967G7084101: RNCC: 3 | RNVC: 2
(241)A0126N967G7084101: RNCC: 5 | RNVC: 2

25 Jan 2006

5340-15-051-4077
Staffa

150514077
4560156: RNCC: 3 | RNVC: 2
4560156: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-020-2227
Traversino

150202227
02-231E04-7: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-199-4375
Asse

151994375
673478: RNCC: 3 | RNVC: 2
(241)A0866673478: RNCC: 5 | RNVC: 2

4 Apr 2005

5340-15-188-3475
Utility Resilient Mount

151883475
30073270: RNCC: 3 | RNVC: 2
Z03.01.30.00: RNCC: 5 | RNVC: 2
5340PL0948867: RNCC: 6 | RNVC: 9

3 Sep 2009

5340-15-204-0625
Utility Resilient Mount

152040625
6100011: RNCC: 3 | RNVC: 2

23 Aug 2011

5340-15-118-0510
Supporto Lato Sinis

151180510
D0488610: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-137-4112
Anello

151374112
1000-23: RNCC: 3 | RNVC: 2
1000-23: RNCC: 5 | RNVC: 9

9 Oct 1996

5340-15-074-4084
Turnbuckle

150744084
2B36UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-074-4047
Turnbuckle

150744047
2A76UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-149-5935
Lateral Handle Prot

151495935
340-5768/01: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-114-1392
Dust And Moisture Seal Protective Cap

151141392
54-0118-053: RNCC: 3 | RNVC: 2

4 Jun 1993

5340-15-127-0843
Molla Di Richiamo

151270843
330923: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-115-2410
Ball Grip

151152410
518301520: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-155-4446
Protector Assy

151554446
CBD71023G01: RNCC: 3 | RNVC: 2

25 Mar 2002

5340-15-105-6358
Collare Serraggio

151056358
2105480: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-122-2765
Nonmetallic Bumper

151222765
800052269: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-148-9079
Double Angle Bracket

151489079
4813511: RNCC: 3 | RNVC: 2

27 Oct 1998

5340-15-151-5520
Dust And Moisture Seal Protective Cap-Plug

151515520
970057: RNCC: 3 | RNVC: 2

7 Jun 2000

5340-15-193-2356
Angle Bracket

151932356
504164720: RNCC: 3 | RNVC: 2
(241)A4249504164720: RNCC: 5 | RNVC: 2

22 Apr 2010

5340-15-198-4305
Access Door

151984305
122510023: RNCC: 3 | RNVC: 2

27 Sep 2004

5340-15-120-6934
Coperchietto In Fer

151206934
D0468243: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-121-7473
Double Angle Bracket

151217473
740418: RNCC: 3 | RNVC: 2

14 Feb 1996

5340-15-215-1130
Serratura Da Infila

152151130
44120: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-150-9922
Supp.Fanale Post.

151509922
60186207: RNCC: 3 | RNVC: 2

21 Feb 2000

5340-15-102-3504
Helical Compression Spring Seat

151023504
25093-124: RNCC: 3 | RNVC: 2
25093-124: RNCC: 5 | RNVC: 9

12 Oct 1987

5340-15-180-7026
Utility Resilient Mount

151807026
2-2314.004: RNCC: 3 | RNVC: 2
22314004: RNCC: 5 | RNVC: 2
CV146355: RNCC: 5 | RNVC: 2

7 Jul 2008

5340-15-112-0313
Calettatore Autocen

151120313
BIKON8000-50X65-SOLUZ.B: RNCC: 3 | RNVC: 2

19 Feb 1991

5340-15-202-3774
Rod

152023774
633757-12/3: RNCC: 3 | RNVC: 2

5 Mar 2007

5340-15-120-7318
Hook

151207318
184-08-1-01-0-00: RNCC: 3 | RNVC: 2

1 Apr 1998

5340-15-154-1789
Pignone

151541789
130762: RNCC: 3 | RNVC: 2

27 Mar 2001

5340-15-074-4178
Turnbuckle

150744178
2A12UNI2019AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-074-4282
Turnbuckle

150744282
2A8UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-006-2520
Ghiera Speciale

150062520
0-10043: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-106-0055
Piastra Bloccaggio

151060055
2.1379.006.0: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-118-0477
Portaboccola In Leg

151180477
D0488037: RNCC: 3 | RNVC: 2

18 Nov 1994

5340-15-114-7764
Blanking Plate

151147764
560.2751.095: RNCC: 3 | RNVC: 2

4 Aug 1992

5340-15-178-1981
Fermacavo

151781981
69F025P001: RNCC: 3 | RNVC: 2

11 Mar 2005

5340-15-100-7982
Coperchio Complessi

151007982
000900263350: RNCC: 5 | RNVC: 2
000900263350: RNCC: 5 | RNVC: 9

20 Nov 1986

5340-15-079-0911
Handwheel

150790911
VL1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-155-8262
Harness Bracket

151558262
4112T82G01: RNCC: 3 | RNVC: 2
4112T82G01: RNCC: 3 | RNVC: 2

11 Jul 2002

5340-15-114-8799
Corredoinstallazion

151148799
188-2013/03: RNCC: 3 | RNVC: 2

1 Sep 1992

5340-15-215-0609
Piastrina Piana

152150609
PIASTRINA: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-143-6316
Staffa

151436316
866392: RNCC: 3 | RNVC: 2
908117: RNCC: 3 | RNVC: 2

11 Dec 1996

5340-15-209-0772
Moschettone Mod.107

152090772
WA107: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-060-8912
Helical Compression Spring Retainer

150608912
H50D32: RNCC: 5 | RNVC: 2
H50D32: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-145-0966
Anode Retaining Plug

151450966
21770047A: RNCC: 3 | RNVC: 2

28 Apr 1997

5340-15-152-1544
Dust And Moisture Seal Protective Cap-Plug

151521544
4882705: RNCC: 3 | RNVC: 2
4882705: RNCC: 5 | RNVC: 9

8 Aug 2000

5340-15-113-2375
Flangiacomplessivo

151132375
233A1046-403: RNCC: 3 | RNVC: 2

11 Apr 1991

5340-15-109-3438
Rotating Shaft Eye Bracket

151093438
010150: RNCC: 3 | RNVC: 2
10150: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-100-8090
Supporto

151008090
109-0630-48-2: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-15-158-4213
Linguetta

151584213
D0475789: RNCC: 3 | RNVC: 2
(241)A0461D0475789: RNCC: 5 | RNVC: 2

9 Feb 2004

5340-15-151-8672
Tassello Gomma

151518672
60120172: RNCC: 3 | RNVC: 2

14 Jul 2000

5340-15-108-8027
Rim Clen Clamp (1)

151088027
60145759: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-212-2489
Fascetta Ny Natur.2

152122489
BM7835: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-230-2570
Fascetta

152302570
321949F01: RNCC: 3 | RNVC: 2
534015E146685: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-051-0585
Handwheel

150510585
0VL1I2SER0-1126IPU2: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-115-2760
Support

151152760
518052090: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-110-4962
Seal Boot

151104962
79035795: RNCC: 3 | RNVC: 2
79035795: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-203-9710
Coperchio Ferma Cus

152039710
22500671: RNCC: 3 | RNVC: 2
(241)A486722500671: RNCC: 5 | RNVC: 2

29 Jul 2011

5340-15-100-8042
Coperchio Complessi

151008042
000900294150: RNCC: 5 | RNVC: 2
000900294150: RNCC: 5 | RNVC: 9

20 Nov 1986

5340-15-204-5386
Staffa Con Passaggi

152045386
KB: RNCC: 3 | RNVC: 2
(241)AA045KB: RNCC: 5 | RNVC: 2

11 Nov 2011

5340-15-148-6563
Access Cover

151486563
190525191: RNCC: 3 | RNVC: 2

17 Sep 1998

5340-15-147-5167
Ritegno

151475167
31393-001: RNCC: 5 | RNVC: 2
31393-001: RNCC: 5 | RNVC: 9
31393-001: RNCC: 5 | RNVC: 9

12 Dec 1997

5340-15-111-7279
Socket

151117279
F407A1A1-05: RNCC: 3 | RNVC: 2
F407A1A1-05: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-050-4630
Maniglia

150504630
1922-34: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-074-4406
Turnbuckle

150744406
2A12UNI2021AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-162-9773
Bracket

151629773
60129043: RNCC: 3 | RNVC: 2

9 Apr 2002

5340-15-107-5683
Handwheel

151075683
88358.0050: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-004-1546
Cover Plate Access

150041546
1375741: RNCC: 3 | RNVC: 2
1375741: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-074-3667
Turnbuckle

150743667
2C6UNI2021AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-222-1198
Ruote Girevoli Alth

152221198
RUOTE100: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-118-3863
Resilient Mount

151183863
60158595: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-181-0572
Engine Accessory Bracket

151810572
071345: RNCC: 3 | RNVC: 2
(241)A3593071345: RNCC: 5 | RNVC: 2

10 Oct 2008

5340-15-109-1930
Helical Compression Spring Seat

151091930
8834798: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-007-0260
Half Hinge

150070260
P-883723-003: RNCC: 3 | RNVC: 2
P883723-003: RNCC: 5 | RNVC: 2

20 Nov 1979

5340-15-187-0549
Leverlatch Assy

151870549
109-0362-22-105: RNCC: 3 | RNVC: 2

9 Feb 2009

5340-15-201-9996
Flangia Chiusura

152019996
540033: RNCC: 3 | RNVC: 2
(241)A2156540033: RNCC: 5 | RNVC: 2

22 Jan 2007

5340-15-214-2358
Cantonale

152142358
CANTONALE4X4: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-166-4816
Squadretta

151664816
DE03820330711: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-122-5504
Link Pivot

151225504
01TL21269: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-189-6477
Placca Con Maniglia

151896477
07077.18.0.00.00: RNCC: 3 | RNVC: 2

26 Feb 2010

5340-15-182-6126
Fascetta Serracavo

151826126
1903988: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-204-4491
Lock Bar

152044491
1P 348266: RNCC: 3 | RNVC: 2
1P 348266: RNCC: 5 | RNVC: 2

7 Nov 2011

5340-15-074-4053
Turnbuckle

150744053
1B8UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-156-2080
Plate

151562080
(241)A3460CBD71207P03: RNCC: 3 | RNVC: 2
CBD71207P03: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-115-7139
Ghieranonfilettatae

151157139
D1401148: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-15-110-4468
Bracket

151104468
42010633: RNCC: 3 | RNVC: 2
42010633: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-201-4696
An Bracket Assembly

152014696
4148T65G01: RNCC: 3 | RNVC: 2
(241)A34604148T65G01: RNCC: 5 | RNVC: 2

26 Sep 2006

5340-15-050-3600
Tornichetto

150503600
EF5-35A: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-144-6886
Ruota In Ghisa Rive

151446886
20-250: RNCC: 3 | RNVC: 2
31-211: RNCC: 3 | RNVC: 2

11 Dec 1996

5340-15-008-0229
Escutcheon Plate

150080229
999-0500-66-2: RNCC: 3 | RNVC: 2

11 Nov 1981

5340-15-005-8477
Semifascetta Specia

150058477
39A2003-65: RNCC: 3 | RNVC: 2

2 Jan 1979

5340-15-156-2007
Base

151562007
(241)A3460CBD71154P01: RNCC: 3 | RNVC: 2
CBD71154P01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-120-6761
Flancia Per Carenat

151206761
D1401548: RNCC: 3 | RNVC: 2

29 Jun 1996

5340-15-178-1051
Hinge

151781051
ART.020815681: RNCC: 3 | RNVC: 2

14 Feb 2005

5340-15-197-7327
Dust And Moisture Seal Protective Plug

151977327
GPN800M10X1: RNCC: 3 | RNVC: 2
GPN800M10X1: RNCC: 5 | RNVC: 2

22 Apr 2004

5340-15-148-1420
Shock Mount Pad

151481420
4A00100N50: RNCC: 3 | RNVC: 2
93160022: RNCC: 5 | RNVC: 2

22 Jun 1998

5340-15-122-0005
Strapping

151220005
60176353: RNCC: 3 | RNVC: 2

10 Apr 1996

5340-15-205-7530
Spring Protection

152057530
109-0012-03-101: RNCC: 3 | RNVC: 2

30 Mar 2012

5340-15-162-9595
Teflon Ring

151629595
10C-031-102: RNCC: 3 | RNVC: 2

9 Apr 2002

5340-15-207-8684
Utility Resilient Mount

152078684
5801345513: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-213-4744
Moschettone Acciaio

152134744
014.114000.1: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-122-2164
Pivot Fixation

151222164
800058046: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-213-5434
Cilindro Mm.60

152135434
0920.3: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-105-5969
Staffa A Gomito

151055969
9925390: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-005-6461
Anello Di Spinta

150056461
0-21121: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-005-6534
Tappo Speciale

150056534
0-31491: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-206-3001
Dust And Moisture Seal Protective Cap

152063001
R56276: RNCC: 3 | RNVC: 2

1 Jun 2012

5340-15-001-8262
Dust And Moisture Seal Protective Cap

150018262
5949790073: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-001-4233
Resilient Mount Plate

150014233
182702162: RNCC: 3 | RNVC: 2

2 Jul 2013

5340-15-166-4956
Shock Mount

151664956
BH25685A: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-214-6905
Paletto

152146905
EXRI3109388: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-213-8865
Cardine Regolabile

152138865
425IBFM: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-074-4259
Turnbuckle

150744259
1A6UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-179-2897
Overcentre Lashing

151792897
01131-1-0L2M-HSW-1XTUB40,LO,050M: RNCC: 3 | RNVC: 2

16 Oct 2006

5340-15-214-3548
Protezione

152143548
AVK-040: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-120-6496
Piastrina Di Strozz

151206496
D0284160: RNCC: 3 | RNVC: 2

28 Jun 1996

5340-15-211-0379
Valigia 535

152110379
535302: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-189-5182
Fascetta

151895182
420SSF30: RNCC: 3 | RNVC: 2

26 Feb 2010

5340-15-174-6966
Turnbuckle

151746966
1B2020: RNCC: 3 | RNVC: 2

25 Sep 2003

5340-15-050-1851
Fascetta

150501851
13486ME: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-067-0193
Zinco

150670193
43270-44635CZ: RNCC: 2 | RNVC: 2

1 Apr 1998

5340-15-119-7419
Boss

151197419
01TL23283: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-184-9566
Minuteria Metallica

151849566
NSN534015R691224: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-112-8437
Cuneodib

151128437
469725: RNCC: 3 | RNVC: 2
D0469725: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-156-3698
Plugging Rod

151563698
CBD71330P01: RNCC: 3 | RNVC: 2
(241)A3460CBD71330P01: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-163-3200
Handle

151633200
01TC13360: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-157-4208
Pattino Di Metallo

151574208
21505735: RNCC: 3 | RNVC: 2

14 Jul 2003

5340-15-114-4049
Guida Compl.

151144049
212-5200-21-1: RNCC: 3 | RNVC: 2

19 May 1994

5340-15-116-9866
Left Hinge Kit

151169866
9AA2002A018-201: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-101-4832
Coperchio Accesso

151014832
C84328-4-9: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-235-4920
Attacco A Palo Mete

152354920
DYA075: RNCC: 3 | RNVC: 2
534015E122649: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-105-8941
Tirante A Teste Fil

151058941
4-552: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-147-5805
T-Fitting

151475805
98RV969: RNCC: 3 | RNVC: 2

30 Dec 1997

5340-15-136-5709
Fascetta

151365709
J664G23: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-055-6669
Staffa Centrale Fis

150556669
543725: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-127-5329
Staffetta Di Fissag

151275329
877915: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-141-8245
Handwheel

151418245
DE09VM01: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-220-0054
Stop Con Occhiello

152200054
S06: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-166-5053
Protection

151665053
31630001: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-218-2533
Gancio Pannello For

152182533
B-02/15: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-210-7035
Filetto Riportato 8

152107035
512414: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-206-0016
Engine Accessory Bracket

152060016
311488F01: RNCC: 3 | RNVC: 2
(241)A0106311488F01: RNCC: 5 | RNVC: 2

2 May 2012

5340-15-000-1358
Dust And Moisture Seal Protective Cap-Plug Set

150001358
N635G1107102: RNCC: 3 | RNVC: 2

30 Jan 2013

5340-15-109-4825
Helical Compression Spring Seat

151094825
1P 516334: RNCC: 3 | RNVC: 2
1P 516334: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-020-1784
Dust And Moisture Seal Protective Plug

150201784
01-231H62: RNCC: 3 | RNVC: 2
55.25.007.A: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-109-9570
Attacco Longherone

151099570
13725-001A00: RNCC: 3 | RNVC: 2
13725-001: RNCC: 5 | RNVC: 2
13725-001: RNCC: 5 | RNVC: 9
13725-001A00: RNCC: 5 | RNVC: 9

14 Mar 1990

5340-15-166-4788
Supporto

151664788
10185001: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-122-3897
Shock Mount Pad

151223897
D1402355: RNCC: 3 | RNVC: 2

20 Jun 2000

5340-15-156-3639
Lower Rear Support

151563639
(241)A3460CBD71408P18: RNCC: 3 | RNVC: 2
CBD71408P18: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-197-8640
Rubber Bumper

151978640
N523G5073201: RNCC: 3 | RNVC: 2

21 May 2004

5340-15-194-7949
Free Wheel

151947949
20141358W: RNCC: 3 | RNVC: 2

17 Jan 2011

5340-15-121-6540
Ptotection Amiante

151216540
800050328: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-145-1995
Positioning Set

151451995
912.1033.18: RNCC: 3 | RNVC: 2

2 Jun 1997

5340-15-153-9075
Snap Hook

151539075
00085403: RNCC: 3 | RNVC: 2
(241)A333400085403: RNCC: 4 | RNVC: 1
9540T3: RNCC: 5 | RNVC: 2

9 Mar 2001

5340-15-149-8860
Piastra Di Collegam

151498860
D0A091000: RNCC: 3 | RNVC: 2

22 Jul 1999

5340-15-139-7216
Chiavistello Di Blo

151397216
A.2851000: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-127-3643
Molla Sulla Leva Co

151273643
833364: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-166-5009
Clamp

151665009
CE14383C7: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-151-9662
Piastra Di Ritegno

151519662
S0011/O02/13/5: RNCC: 3 | RNVC: 2

31 Jul 2000

5340-15-209-1306
Sup Ammortizzatore

152091306
L-22-BA-10: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-008-5993
Nut And Bolt Locking Plate

150085993
1/42446/11: RNCC: 3 | RNVC: 2
14244611: RNCC: 5 | RNVC: 2

27 Mar 1981

5340-15-049-3516
Fascetta

150493516
7-4221-1-01-36068: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-050-5173
Morsetto

150505173
AB680-005-7: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-117-0122
Manual Control Handle

151170122
P.111/47+X-M10: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-193-3927
Piastra Di Montaggi

151933927
504304669: RNCC: 3 | RNVC: 2
(241)A4249504304669: RNCC: 5 | RNVC: 2

11 May 2010

5340-15-148-7252
Dust And Moisture Seal Protective Cap

151487252
A135505-1: RNCC: 3 | RNVC: 2

28 Sep 1998

5340-15-157-7100
Turnbuckle

151577100
A.R.TO.0.26.8: RNCC: 3 | RNVC: 2

16 Oct 2003

5340-15-136-2025
Turnbuckle

151362025
100: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-131-2079
Control Rod

151312079
4100857: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-065-8272
Listello

150658272
2060F: RNCC: 3 | RNVC: 2

4 Sep 1985

5340-15-139-7775
Catenella Completa

151397775
1000238: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-101-4744
Telaio Protettivo

151014744
000200323800: RNCC: 5 | RNVC: 2
000200323800: RNCC: 5 | RNVC: 9

30 May 1987

5340-15-231-9529
Fermaglio Riscaldat

152319529
42530275: RNCC: 3 | RNVC: 2
534015E149828: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-103-0999
Electrical-Me Post

151030999
L2501001: RNCC: 3 | RNVC: 2
DE160.03.201: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-220-3346
Catenaccio Ferro Ve

152203346
MM40: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-041-2127
Tappo Di Protezione

150412127
V12925: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-153-2642
Turnbuckle Body

151532642
122611507: RNCC: 2 | RNVC: 3

12 Dec 2000

5340-15-213-8792
Catenaccio Da Salda

152138792
CATENACCIO300MM: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-114-7564
Supp Flange

151147564
01TL20818: RNCC: 3 | RNVC: 2

4 Aug 1992

5340-15-001-1105
Dust And Moisture Seal Protective Cap

150011105
504343886: RNCC: 3 | RNVC: 2

31 May 2013

5340-15-220-4529
Padlock

152204529
5340RN0600134: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-122-1330
Plate Upper

151221330
A-39113-001: RNCC: 3 | RNVC: 2
A39113-001: RNCC: 3 | RNVC: 2

21 May 1996

5340-15-005-1046
Dust And Moisture Seal Boot

150051046
1137-19-210: RNCC: 3 | RNVC: 2
113719210: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-008-7532
Control Rod

150087532
109-0011-40-3: RNCC: 3 | RNVC: 2

9 Jun 1982

5340-15-189-3772
Stand Base

151893772
541-70-1400: RNCC: 3 | RNVC: 2

17 Feb 2010

5340-15-212-1677
Fascette A Vite

152121677
FASC-VITE: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-118-6487
C Bride De Fixation

151186487
75207996: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-169-0319
Lucchetto C.

151690319
F72005387: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-153-9341
Base (1) Per Sosteg

151539341
142030156: RNCC: 2 | RNVC: 3

12 Mar 2001

5340-15-191-2132
Tassello Fischer Di

151912132
DIAM.9 GANCIO CORTO: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-215-0324
Fascetta (Confezion

152150324
280X4,5: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-139-3719
Staffa

151393719
42031540: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-163-1206
Clip

151631206
1312192080: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-193-5738
Door Release Lever

151935738
21300151: RNCC: 3 | RNVC: 2

15 Jun 2010

5340-15-119-7714
Spacing Threaded Standoff

151197714
9431024: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-139-4937
Boccola Dentata

151394937
61584824: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-107-1848
Electrical-Me Post

151071848
RS407041: RNCC: 3 | RNVC: 2

24 May 1989

5340-15-064-6343
Electrical-Me Post

150646343
01-245-E-100: RNCC: 3 | RNVC: 2

24 Jun 1984

5340-15-052-1180
Tirante

150521180
H787-12-63: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-000-5198
Thread Support Assy

150005198
213A7378-001: RNCC: 3 | RNVC: 2

13 Mar 2013

5340-15-067-2621
Molla

150672621
DOR032450: RNCC: 2 | RNVC: 2

1 Apr 1998

5340-15-116-8561
Cilin Portaboccola

151168561
D1402562: RNCC: 3 | RNVC: 2

8 Apr 1994

5340-15-213-8246
Serratura Da Infila

152138246
44151-80: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-059-3007
Electrical-Me Post

150593007
SW20323: RNCC: 3 | RNVC: 2

19 Jun 1974

5340-15-105-8198
Sostegno Elastico

151058198
002.8938.0: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-181-6630
Punzoni Serie 9 Num

151816630
SERIE 9 NUMERI: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-160-8158
Lucchetto C.

151608158
F720156911: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-182-6879
Cilindro In Ottone

151826879
CILINDROOTTONE54MM: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-129-6033
Escutcheon Plate

151296033
FGPRESS30B: RNCC: 3 | RNVC: 2
FGPRESS30B: RNCC: 5 | RNVC: 2
FGPRESS30B: RNCC: 5 | RNVC: 9

9 Oct 1996

5340-15-147-5803
T-Fitting

151475803
98RV943: RNCC: 3 | RNVC: 2

30 Dec 1997

5340-15-117-4087
Fondello Per Manopo

151174087
D0466378: RNCC: 3 | RNVC: 2

6 Apr 1994

5340-15-127-5987
Distanziale Radiato

151275987
986314: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-001-5758
Liquid Holding Unit Filler Neck

150015758
20.867.03: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-121-8967
Shock Mount Pad

151218967
132508111: RNCC: 3 | RNVC: 2

19 Mar 1996

5340-15-188-8043
Speciale Piastrina

151888043
552306116000: RNCC: 3 | RNVC: 2
(241)A1140552306116000: RNCC: 5 | RNVC: 2

19 Nov 2009

5340-15-141-5499
Ferodo

151415499
DOZ026059: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-074-4383
Turnbuckle

150744383
2C56UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-147-5802
T-Fitting

151475802
98RV922: RNCC: 3 | RNVC: 2

30 Dec 1997

5340-15-186-7233
Cerniera 70X50

151867233
CERNIERA70X50: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-178-9886
Door

151789886
RS 301 815: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-155-0263
Access Door

151550263
1PA9172500226921000: RNCC: 3 | RNVC: 2
500226921000: RNCC: 3 | RNVC: 2

8 Jan 2002

5340-15-001-7238
Corrosion Preventive Anode

150017238
1 123 2001: RNCC: 3 | RNVC: 2

15 Jul 2013

5340-15-207-1965
Shackle Strap

152071965
R0085991: RNCC: 2 | RNVC: 2
(241)AG350R0085991: RNCC: 5 | RNVC: 2

20 Sep 2012

5340-15-215-0499
Fischer

152150499
01994: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-191-9362
Lucchetti Acombinaz

151919362
SARGENT: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-061-8172
Fascetta Speciale

150618172
0-102353: RNCC: 3 | RNVC: 2

30 Nov 1982

5340-15-115-6983
Cuneo Di Blocco

151156983
D1401277: RNCC: 3 | RNVC: 2

10 Mar 1994

5340-15-154-6055
Testa Di Tirante Fi

151546055
157608208: RNCC: 2 | RNVC: 3

26 Jul 2001

5340-15-063-0693
Cover Plate Access

150630693
8836948: RNCC: 3 | RNVC: 2

15 Jun 1982

5340-15-134-5135
Chiusura

151345135
2100009: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-153-5165
Access Door

151535165
142010819: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-221-8218
Hub Lucchetti Otton

152218218
LUCCHETTIHUBOTTONEBKP30: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-074-4091
Turnbuckle

150744091
2B76UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-057-0076
Anello Distanziator

150570076
078054: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-106-9867
Piastra Di Attacco

151069867
4-558: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-166-4930
Maniglia Esterna F.

151664930
86003590: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-006-2546
Raschiatore Special

150062546
0-28869: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-105-6317
Collare Serraggio

151056317
972655: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-116-4987
Resilient Mount

151164987
60150588: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-006-2697
Fascetta Speciale

150062697
0-34050: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-127-2106
Tirante

151272106
1741-67-008: RNCC: 3 | RNVC: 2
1741-67-008: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-156-3704
Plugging Plate

151563704
(241)A3460CBD71332P01: RNCC: 3 | RNVC: 2
CBD71332P01: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-209-0783
Fissaggi Universali

152090783
0302: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-118-0352
Piastrina Di Antisv

151180352
D0467984: RNCC: 3 | RNVC: 2

1 Dec 1994

5340-15-141-0193
Serratura Per Quadr

151410193
12994: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-162-2667
Shock Mount Pad

151622667
29.73.79.60: RNCC: 3 | RNVC: 2

17 May 2001

5340-15-163-2276
Clip Dia

151632276
17764391: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-066-1565
Piastrina Arresto

150661565
P-893035-001: RNCC: 3 | RNVC: 2
P893035-001: RNCC: 5 | RNVC: 2

10 Feb 1986

5340-15-148-7439
Threaded Rod End

151487439
180532144: RNCC: 3 | RNVC: 2

28 Sep 1998

5340-15-125-5416
Cofezione Faston Ma

151255416
CONFEZFASTONMASCHI: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-163-1366
Support

151631366
1311371080: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-204-3237
Mensola Sinistra

152043237
0000500428513: RNCC: 3 | RNVC: 2
(241)A39630000500428513: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-154-9311
Protective Cover

151549311
CBD71011P01: RNCC: 3 | RNVC: 2

13 Nov 2001

5340-15-183-8691
Lucchetti A Combina

151838691
COMM631020060006: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-138-2893
Lucchetto Ad Arco M

151382893
4115: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-051-4190
Anello

150514190
4527818: RNCC: 3 | RNVC: 2
4527818: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-063-6131
Cover Plate Access

150636131
4696561: RNCC: 3 | RNVC: 2

11 May 1996

5340-15-112-7757
Clamp

151127757
3617101: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-202-7900
Saldata Staffa

152027900
190516958: RNCC: 3 | RNVC: 2

11 Jul 2007

5340-15-127-3037
Staffetta

151273037
708020: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-170-3314
Plate Assy

151703314
205D007: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-153-9424
Handwheel

151539424
142061176: RNCC: 2 | RNVC: 3

12 Mar 2001

5340-15-102-8999
Electrical-Me Post

151028999
1P128226: RNCC: 3 | RNVC: 2
1P128226: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-196-9920
Padlock

151969920
PN UAS 00029161: RNCC: 3 | RNVC: 2
5340F76026933: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-109-1921
Mensolaparacolpi

151091921
60116345: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-102-5971
Cover Plate Access

151025971
205800: RNCC: 3 | RNVC: 2

4 Mar 1993

5340-15-222-0620
Serratura Scrocco S

152220620
7435.60.2.46: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-006-2727
Piastra Speciale

150062727
0-25184: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-195-3573
Ancorante Pesante H

151953573
371774: RNCC: 3 | RNVC: 2
(241)AD237371774: RNCC: 5 | RNVC: 2

16 Mar 2011

5340-15-040-2185
Cerniera

150402185
2-2259-101-24538: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-001-0890
Dust And Moisture Seal Boot

150010890
C03-00199: RNCC: 3 | RNVC: 2

30 May 2013

5340-15-071-4558
Serratura A Pulsant

150714558
1871TAV114: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-042-4927
Fascetta Speciale

150424927
6745-7: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-001-1082
Angle Bracket

150011082
5801350074: RNCC: 3 | RNVC: 2

31 May 2013

5340-15-175-8389
Cilindro Welka 60Mm

151758389
70022280: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-111-6033
Mountingplate

151116033
A02704-02-08: RNCC: 3 | RNVC: 2
A02704-02-08: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-156-5210
Control Rod

151565210
21200077-19: RNCC: 3 | RNVC: 2

21 Feb 2003

5340-15-106-0632
Scodellino Molla

151060632
8062: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-100-7987
Slitta

151007987
000900280400: RNCC: 5 | RNVC: 2
000900280400: RNCC: 5 | RNVC: 9

20 Nov 1986

5340-15-112-2890
Squadretta Assieme

151122890
277A6371-401: RNCC: 3 | RNVC: 2

10 Apr 1991

5340-15-127-6493
Molla Servo Comando

151276493
816027: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-156-3594
Visual In Port Assy

151563594
(241)A3460CBD71410G01: RNCC: 3 | RNVC: 2
CBD71410G01: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-216-8258
Tassello In Acciaio

152168258
0405: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-153-1236
Handwheel

151531236
32X12 SW: RNCC: 3 | RNVC: 2

27 Nov 2000

5340-15-149-3077
Riparo Centrale Ped

151493077
4885724: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-148-3465
Double Angle Bracket

151483465
101937: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-149-1108
Double Angle Bracket

151491108
60159177: RNCC: 3 | RNVC: 2

2 Dec 1998

5340-15-218-7004
Paraspigoli Angolar

152187004
071392100: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-201-4694
An Bracket Assembly

152014694
4148T63G01: RNCC: 3 | RNVC: 2
(241)A34604148T63G01: RNCC: 5 | RNVC: 2

26 Sep 2006

5340-15-107-7449
Dust And Moisture Seal Protective Cap

151077449
001-51-300-030: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-000-3563
Screen Door Hardware Set

150003563
939-MEC-22: RNCC: 3 | RNVC: 2

25 Feb 2013

5340-15-116-4886
Double Angle Bracket

151164886
60169076: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-156-3379
Trasportatore

151563379
(241)A3460CBD71239P01: RNCC: 3 | RNVC: 2
CBD71239P01: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-15-127-4909
Staffetta Sostegno

151274909
859367: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-198-3945
Antivibrante

151983945
99TR31980X8O: RNCC: 3 | RNVC: 2
(241)A312199TR31980X8O: RNCC: 5 | RNVC: 2

24 Sep 2004

5340-15-155-4880
Base

151554880
CBD71189P01: RNCC: 3 | RNVC: 2

27 Mar 2002

5340-15-163-3005
Schraube

151633005
6110.101: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-154-7926
Pipe Bracket

151547926
1PA424960194620: RNCC: 3 | RNVC: 2
60194620: RNCC: 3 | RNVC: 2

26 Sep 2001

5340-15-211-5238
Cap Protective Push

152115238
77A-1167: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-110-2898
Bracket Fue

151102898
P120086-002: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-206-2282
Dust And Moisture Seal Protective Cover

152062282
701/45502: RNCC: 3 | RNVC: 2
701/45502: RNCC: 3 | RNVC: 2
(241)AD751701/45502: RNCC: 5 | RNVC: 2

29 May 2012

5340-15-102-7276
Electrical-Me Post

151027276
1576-06-453: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-112-8512
Supporto

151128512
471868: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-008-5421
Scrocco Completo

150085421
4478670: RNCC: 3 | RNVC: 2
4478670: RNCC: 5 | RNVC: 9

29 Sep 1980

5340-15-118-5478
Shock Mount Pad

151185478
D0475439: RNCC: 3 | RNVC: 2

10 Jan 1995

5340-15-191-5509
Staffa Laterale

151915509
5789490: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-153-9319
Handwheel

151539319
142022108: RNCC: 2 | RNVC: 3

12 Mar 2001

5340-15-003-9168
Headless Straight Rod

150039168
182703019: RNCC: 3 | RNVC: 2
(241)A0199182703019: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-122-2905
Cache Lateral Droit

151222905
800074151: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-006-6917
Fork

150066917
525A129: RNCC: 3 | RNVC: 2

9 Jan 1980

5340-15-105-2961
Poker

151052961
10561/1: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-007-9602
Resilient Mount

150079602
4449016: RNCC: 3 | RNVC: 2
4449016: RNCC: 5 | RNVC: 9

22 Sep 1979

5340-15-108-9897
Rubber Bumper

151089897
60135993: RNCC: 3 | RNVC: 2

9 May 1988

5340-15-068-4523
Morsetto Complessiv

150684523
808-11411-06: RNCC: 3 | RNVC: 2

5 Mar 1986

5340-15-232-9074
Handwheel

152329074
800.0023/11: RNCC: 3 | RNVC: 2
535515E074560: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-067-8837
Riscontro Regolabil

150678837
93543-001: RNCC: 3 | RNVC: 2

26 Nov 1985

5340-15-200-9868
Resilient Mount

152009868
UM-314771P0001: RNCC: 3 | RNVC: 2
(241)A5205UM-314771P0001: RNCC: 5 | RNVC: 2

26 Apr 2006

5340-15-050-3162
Fascetta

150503162
9017-21: RNCC: 3 | RNVC: 2

1 Jan 1974

Load More Results