What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 44 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 44 of 72

5340-15-121-7963
Piastra Connettori

151217963
142520907: RNCC: 3 | RNVC: 2

21 Feb 1996

5340-15-121-6199
Sabot Moteur

151216199
80A051598: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-074-4353
Turnbuckle

150744353
1C22UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-118-0467
Pattino In Ferobest

151180467
487627: RNCC: 3 | RNVC: 2
D0487627: RNCC: 3 | RNVC: 2

14 Dec 1994

5340-15-116-8608
Cilindro Coperchio

151168608
D1402584: RNCC: 3 | RNVC: 2

8 Apr 1994

5340-15-195-7357
Fermo

151957357
179000104: RNCC: 3 | RNVC: 2
(241)A0199179000104: RNCC: 5 | RNVC: 2

3 May 2011

5340-15-136-1606
Scarica Coriandoli

151361606
769665S: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-106-0069
Piastra Bloccaggio

151060069
3552131: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-109-4745
Helical Compression Spring Seat

151094745
1P 545746: RNCC: 3 | RNVC: 2
1P 545746: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-109-7496
Helical Compression Spring Seat

151097496
4780559: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-193-0303
Angle Bracket

151930303
504056194: RNCC: 3 | RNVC: 2
(241)A4249504056194: RNCC: 5 | RNVC: 2

6 Apr 2010

5340-15-169-5433
Lucchetto S&G

151695433
F72013881: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-154-0819
Tirante A Teste Fil

151540819
500305750: RNCC: 3 | RNVC: 2
(241)A4249500305750: RNCC: 5 | RNVC: 2
1PA4249500305750: RNCC: 8 | RNVC: 2

20 Mar 2001

5340-15-170-8095
Asse Di Scorrimento

151708095
340-0727/05: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-064-6254
Fascetta

150646254
TSP362-09-05: RNCC: 3 | RNVC: 2
TSP333/04: RNCC: 5 | RNVC: 2
TSP333/04: RNCC: 5 | RNVC: 2

16 Nov 1983

5340-15-050-1507
Perno A Forcella

150501507
4-3351-301-41864-2: RNCC: 3 | RNVC: 2
4-3351-3-01-41864-2: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-135-4174
Assieme Serratura D

151354174
204-030-500-6: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-054-4914
Spessore Speciale

150544914
105-3306-04-1: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-105-8493
Double Angle Bracket

151058493
841195: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-178-9916
Plate Assembly

151789916
RS 404 406 AU: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-009-5819
Helical Compression Spring Seat

150095819
75464511: RNCC: 3 | RNVC: 2
9982553: RNCC: 5 | RNVC: 2
75464511: RNCC: 5 | RNVC: 9

22 Sep 1979

5340-15-210-5568
Gancio

152105568
257973-P1: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-178-9977
Plate

151789977
RS 407 620: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-105-6339
Collare Serraggio

151056339
638547: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-170-4263
Shaft Assembly

151704263
155104450: RNCC: 3 | RNVC: 2

16 Jan 2003

5340-15-068-2316
Anchor Strap

150682316
W012196: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-002-1680
Angle Bracket

150021680
5801359653: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-105-8509
Double Angle Bracket

151058509
1365017: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-179-9962
Headless Straight Rod

151799962
NN79002G02: RNCC: 3 | RNVC: 2

16 Nov 2007

5340-15-119-0999
Helical Compression Spring Seat

151190999
73064716: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-007-2403
Nut And Bolt Locking Plate

150072403
1398425: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-155-3075
Resilient Mount

151553075
60186876: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-15-157-7259
Turnbuckle

151577259
TENDITORE INOX CRNI UN16900 16MM: RNCC: 3 | RNVC: 2

16 Oct 2003

5340-15-055-6841
Staffetta Sinistra

150556841
527853: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-116-8580
Coperchio Premiguar

151168580
D0472273: RNCC: 3 | RNVC: 2

8 Apr 1994

5340-15-056-3156
Distanziatore

150563156
69567C39: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-116-8514
Fondello Per Pompa

151168514
469492: RNCC: 3 | RNVC: 2
D0469492: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-15-065-0025
Handle

150650025
3614: RNCC: 3 | RNVC: 2
3614: RNCC: 3 | RNVC: 2

10 Jan 1985

5340-15-115-2842
Lever

151152842
518042290: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-116-7944
Piastrina Di Blocca

151167944
DOR0116042: RNCC: 3 | RNVC: 2

18 Nov 1993

5340-15-201-4761
Sonobuoy Electrical

152014761
N882G6005001: RNCC: 3 | RNVC: 2
(241)A0126N882G6005001: RNCC: 5 | RNVC: 2

27 Sep 2006

5340-15-074-4262
Turnbuckle

150744262
1A12UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-186-4616
Punta Per Tracciare

151864616
PUNTAPERTRACCIARE: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-193-1579
Angle Bracket

151931579
504147882: RNCC: 3 | RNVC: 2
(241)A4249504147882: RNCC: 5 | RNVC: 2

20 Apr 2010

5340-15-212-1102
Fascetta Cm 3X60

152121102
4/11657: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-121-3262
Flange

151213262
920-0305-01: RNCC: 3 | RNVC: 2

7 Nov 1995

5340-15-204-2357
Prolunga Snodabile

152042357
A.19154-A1: RNCC: 3 | RNVC: 2
(241)A7904A.19154-A1: RNCC: 5 | RNVC: 2

6 Oct 2011

5340-15-009-3862
Maniglia Dx

150093862
206-9203-02-5: RNCC: 3 | RNVC: 2

22 Jun 1981

5340-15-089-7678
Supporto Completo

150897678
204-7120-10-1: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-118-3060
Control Rod

151183060
142520912: RNCC: 3 | RNVC: 2

11 May 1994

5340-15-009-5806
Threaded End Tensioning Tie Rod

150095806
75452611: RNCC: 3 | RNVC: 2
9981284: RNCC: 5 | RNVC: 2
75452611: RNCC: 5 | RNVC: 9

22 Sep 1979

5340-15-118-7462
Nut And Bolt Locking Plate

151187462
9431350: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-053-1098
Extension Drawer Slide

150531098
92N042P002: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-193-1630
Angle Bracket

151931630
504156923: RNCC: 3 | RNVC: 2
(241)A4249504156923: RNCC: 5 | RNVC: 2

20 Apr 2010

5340-15-170-2733
Spring Plate

151702733
36.3141.64: RNCC: 3 | RNVC: 2

12 Nov 2002

5340-15-177-6421
Rotary Key Switch W

151776421
2000311: RNCC: 3 | RNVC: 2

4 Jun 2004

5340-15-123-7100
Morsetto A Mano In

151237100
3330/2-50: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-112-4255
Support

151124255
122TE2008-1: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-156-3582
Dust Protective Cap

151563582
(241)A3460CBD71076P01: RNCC: 3 | RNVC: 2
CBD71076P01: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-117-4074
Piastrina Metallica

151174074
568096: RNCC: 3 | RNVC: 2
D0568096: RNCC: 3 | RNVC: 2

6 Apr 1994

5340-15-199-7996
Anello

151997996
D0475761: RNCC: 3 | RNVC: 2
(241)A0461D0475761: RNCC: 5 | RNVC: 2

7 Jun 2005

5340-15-007-9386
Dust And Moisture Seal Protective Cap

150079386
4325011: RNCC: 3 | RNVC: 2
4325011: RNCC: 5 | RNVC: 9

1 Mar 1980

5340-15-001-8304
Angle Bracket

150018304
5949781623: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-003-1905
Nut And Bolt Locking Plate

150031905
742959: RNCC: 3 | RNVC: 2
742959: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-101-7816
Fascetta Speciale

151017816
SC32674.49: RNCC: 3 | RNVC: 2

21 Jul 1987

5340-15-106-3500
Tampone

151063500
42301920: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-139-9296
Dado E Bullon Fermo

151399296
K303RA: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-068-2321
Anchor Strap

150682321
W011821: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-196-9926
Padlock

151969926
PN UAS 00032263: RNCC: 3 | RNVC: 2
5340F76028911: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-065-1164
Squadretta Fermo

150651164
A1-53067-003: RNCC: 3 | RNVC: 2
A1-53067-003: RNCC: 5 | RNVC: 9

27 Oct 1984

5340-15-206-3568
Angle Bracket

152063568
50040 6172: RNCC: 3 | RNVC: 2

4 Jun 2012

5340-15-040-5285
Ammortizzatore P12

150405285
N86889T16862: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-207-2596
Spring Loaded Cylinder Fastener

152072596
723009454000: RNCC: 3 | RNVC: 2
(241)A1140723009454000: RNCC: 5 | RNVC: 2

27 Sep 2012

5340-15-105-2075
Rubber Bumper

151052075
4038917: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-101-9458
Dust And Moisture Seal Protective Plug

151019458
542938: RNCC: 3 | RNVC: 2

8 Dec 1986

5340-15-001-7220
Anello Di Riduzione

150017220
01-07-114-2/F-B2: RNCC: 3 | RNVC: 2

15 Jul 2013

5340-15-150-1148
Manual Control Lever

151501148
77800177: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-237-4520
Posizionatore Per C

152374520
182170/14: RNCC: 3 | RNVC: 2
534015E054713: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-115-3464
Plate

151153464
710-6371-082: RNCC: 3 | RNVC: 2
82-01685: RNCC: 5 | RNVC: 2

29 Nov 1992

5340-15-005-4061
Dust And Moisture Seal Protective Cap

150054061
1276-06-641: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-060-5682
Maniglia Speciale A

150605682
27589-101: RNCC: 3 | RNVC: 2

25 May 1977

5340-15-002-1669
Spring Holder

150021669
5801361631: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-120-3494
Double Angle Bracket

151203494
60175889: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-187-1565
Spacing Threaded Standoff

151871565
F125582: RNCC: 3 | RNVC: 2

23 Feb 2009

5340-15-198-4270
Manual Control Lever

151984270
162505918: RNCC: 3 | RNVC: 2

27 Sep 2004

5340-15-179-7027
Double Angle Bracket

151797027
0000500413623: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-121-9018
Supporto Destro Com

151219018
142503921: RNCC: 3 | RNVC: 2

19 Mar 1996

5340-15-001-5963
Angle Bracket

150015963
504173496: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-122-3029
Manual Control Handle

151223029
73125331: RNCC: 3 | RNVC: 2
73125331: RNCC: 5 | RNVC: 2

25 Jun 1996

5340-15-137-3697
Distanziale

151373697
B388473: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-136-4592
Blocchetto Fren.

151364592
VSD18101-1: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-060-2299
Support

150602299
18255-1: RNCC: 3 | RNVC: 2

4 Dec 1976

5340-15-154-1657
Supporto

151541657
A-A133640-1/7: RNCC: 3 | RNVC: 2

27 Mar 2001

5340-15-199-2565
Dust And Moisture Seal Protective Plug

151992565
4224389: RNCC: 3 | RNVC: 2
(241)A42494224389: RNCC: 5 | RNVC: 2

21 Feb 2005

5340-15-180-6851
Corrosion Preventive Anode

151806851
5852525601GM: RNCC: 3 | RNVC: 2
(241)A31215852525601GM: RNCC: 5 | RNVC: 2

4 Jul 2008

5340-15-160-1109
Serratura

151601109
F720109581: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-186-9029
Dust And Moisture Seal Protective Plug

151869029
130532: RNCC: 3 | RNVC: 2
0014780: RNCC: 5 | RNVC: 2
0014780: RNCC: 5 | RNVC: 2
130532: RNCC: 5 | RNVC: 9
0052562: RNCC: 5 | RNVC: 9

5 Jan 2009

5340-15-008-0995
Nut And Bolt Locking Plate

150080995
9936763: RNCC: 3 | RNVC: 2
9936763: RNCC: 5 | RNVC: 9

29 Sep 1980

5340-15-008-1848
Double Angle Bracket

150081848
60114811: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-120-6467
Battuta Per Molla S

151206467
D0471248: RNCC: 3 | RNVC: 2

26 Jun 1996

5340-15-221-8228
Kit Punte A Taglio

152218228
512.001.01: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-119-5390
Contenitore Guida X

151195390
D0484455: RNCC: 3 | RNVC: 2

24 Mar 1995

5340-15-101-7812
Fascetta Speciale

151017812
SC32673.9: RNCC: 3 | RNVC: 2

21 Jul 1987

5340-15-101-1522
Boccola E Anello

151011522
3522 023 13850: RNCC: 3 | RNVC: 2

27 Oct 1986

5340-15-153-6977
Base (1) Per Sosteg

151536977
121104159: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-112-0511
Piastrina Speciale

151120511
244A1742-401: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-009-3766
Maniglia Com Trazio

150093766
1-4-0344: RNCC: 3 | RNVC: 2

27 Oct 1980

5340-15-100-8043
Scatola Assieme

151008043
000900263550: RNCC: 5 | RNVC: 2
000900263550: RNCC: 5 | RNVC: 9

20 Nov 1986

5340-15-066-8493
Dust And Moisture Seal Protective Cap

150668493
276910: RNCC: 2 | RNVC: 2

6 Apr 1994

5340-15-205-5496
Dust And Moisture Seal Protective Cap-Plug

152055496
182702159: RNCC: 3 | RNVC: 2
(241)A0199182702159: RNCC: 5 | RNVC: 2

19 Mar 2012

5340-15-009-4854
Maniglia Ad Uso Spe

150094854
01TL20071: RNCC: 3 | RNVC: 2

28 Nov 1980

5340-15-007-9669
Nut And Bolt Locking Plate

150079669
4418387: RNCC: 3 | RNVC: 2
4418387: RNCC: 5 | RNVC: 9

22 Sep 1979

5340-15-156-5205
Helical Compression Spring Seat

151565205
21200077-26: RNCC: 3 | RNVC: 2

21 Feb 2003

5340-15-169-3297
Lucchetto C.

151693297
F72010653: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-153-7772
Morsetto (1) A Serr

151537772
06100A133890: RNCC: 5 | RNVC: 2
06100A133890: RNCC: 5 | RNVC: 9

28 Feb 2001

5340-15-166-4880
Morsetto Massa 650

151664880
37681: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-222-1072
Asta Livello Olio

152221072
500370238: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-149-5316
Stand Base (1)

151495316
112746148: RNCC: 3 | RNVC: 2

14 Jan 2000

5340-15-218-2532
Gancio Pannello For

152182532
B-02/10: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-116-0235
Threaded End Tensioning Tie Rod

151160235
06-2122-012: RNCC: 3 | RNVC: 2

16 Sep 1993

5340-15-195-4049
Supporto Per Cartel

151954049
SUPPORTO-CARTELLI: RNCC: 3 | RNVC: 2
(241)AD623SUPPORTO-CARTELLI: RNCC: 5 | RNVC: 2

21 Mar 2011

5340-15-178-3741
Embase

151783741
555910176000: RNCC: 3 | RNVC: 2

29 Apr 2005

5340-15-137-3657
Escutcheon Plate

151373657
VU10166: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-120-8410
Stud

151208410
301316: RNCC: 3 | RNVC: 2

4 Sep 1995

5340-15-197-8818
Antivibrante

151978818
MG40: RNCC: 3 | RNVC: 2

24 May 2004

5340-15-198-5494
Multiple Angle Bracket

151985494
4111T06G01: RNCC: 3 | RNVC: 2
(241)A34604111T06G01: RNCC: 5 | RNVC: 2

13 Oct 2004

5340-15-008-0759
Double Angle Bracket

150080759
60113912: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-068-2325
Anchor Strap

150682325
W011557: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-213-8245
Rete Metallica Zinc

152138245
RETEZNCH2MT: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-162-2111
Electronic Equipment Hardware Kit

151622111
3AL34328AA**: RNCC: 3 | RNVC: 2

17 May 2001

5340-15-115-2427
U-Shaped Plate

151152427
518361360: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-147-5831
Security Ventil

151475831
98VA187: RNCC: 3 | RNVC: 2

30 Dec 1997

5340-15-219-7388
Stecca Per Tapparel

152197388
AVCORSTEC: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-175-5093
Golfare Maschio M20

151755093
L2225/1-M20: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-136-8493
Cap

151368493
TU17: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-127-5025
Guarnizione Coman A

151275025
864979: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-151-7350
Access Door

151517350
0-161270: RNCC: 3 | RNVC: 2

4 Jul 2000

5340-15-113-2891
Nut And Bolt Locking Plate

151132891
1Z 591192: RNCC: 3 | RNVC: 2
1Z 591192: RNCC: 5 | RNVC: 9

7 Jan 1994

5340-15-206-3540
Angle Bracket

152063540
50040 2737: RNCC: 3 | RNVC: 2

4 Jun 2012

5340-15-063-3157
Double Angle Bracket

150633157
60113253: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-118-9953
Dust And Moisture Seal Protective Cap

151189953
9817543: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-067-1558
Anello

150671558
11060675: RNCC: 2 | RNVC: 2

1 Apr 1998

5340-15-153-7403
Soffietto Protezion

151537403
142061169: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-112-3972
Comando A Mano Leva

151123972
DOR0114046: RNCC: 3 | RNVC: 2

31 Oct 1995

5340-15-153-7111
Rubber Bumper

151537111
142021277: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-195-7642
Rullo Sostegno Nast

151957642
A.3.3.22.046: RNCC: 3 | RNVC: 2
(241)A3917A.3.3.22.046: RNCC: 5 | RNVC: 2

9 May 2011

5340-15-187-3438
Access Door Locking Ring

151873438
071920: RNCC: 3 | RNVC: 2
(241)A3593071920: RNCC: 5 | RNVC: 2

17 Mar 2009

5340-15-141-9729
Corredo Ammortizzat

151419729
4/11870: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-101-5387
Rubber Bumper

151015387
281: RNCC: 3 | RNVC: 2

26 Nov 1987

5340-15-108-6330
Resilient Mount

151086330
8586052: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-151-4779
Tirante

151514779
0-170508: RNCC: 3 | RNVC: 2
(241)A39630-170508: RNCC: 5 | RNVC: 2
1PA39630-170508: RNCC: 5 | RNVC: 2

30 May 2000

5340-15-115-7067
Centraggio

151157067
D0489281: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-138-5248
Tirante Arresto

151385248
7562726: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-124-3828
Prolunga Lunghezza

151243828
360.013: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-110-5344
Plug

151105344
120.171: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-109-4891
Turnbuckle Body

151094891
1Q 537925: RNCC: 3 | RNVC: 2
1Q 537925: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-202-5899
Protect Blank Panel

152025899
N710U5003201: RNCC: 3 | RNVC: 2
(241)A0126N710U5003201: RNCC: 5 | RNVC: 2

20 May 2007

5340-15-202-9132
Carr Hinge Assembly

152029132
N967G7085101: RNCC: 3 | RNVC: 2
(241)A0126N967G7085101: RNCC: 5 | RNVC: 2

25 Sep 2007

5340-15-120-8197
Staffetta In Ottone

151208197
113590: RNCC: 3 | RNVC: 2

4 Jul 1996

5340-15-202-2798
Fascetta Fissaggio

152022798
41118382: RNCC: 3 | RNVC: 2
(241)A424941118382: RNCC: 5 | RNVC: 2

19 Feb 2007

5340-15-117-7270
Control Rod

151177270
142502243: RNCC: 3 | RNVC: 2

13 Jan 1994

5340-15-116-0599
Threaded End Tensioning Tie Rod

151160599
1Q 503565LA: RNCC: 3 | RNVC: 2
1Q 503565LA: RNCC: 5 | RNVC: 9

12 Apr 1994

5340-15-115-7084
Headless Grooved Rod

151157084
D1401090: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-194-8297
Webbing Strap

151948297
200002402.00908: RNCC: 3 | RNVC: 2
(241)A6114200002402.00908: RNCC: 5 | RNVC: 2

24 Jan 2011

5340-15-198-3984
Morsetto Di Protezi

151983984
M2VAMLB/9: RNCC: 3 | RNVC: 2
(241)A5205M2VAMLB/9: RNCC: 5 | RNVC: 2

24 Sep 2004

5340-15-006-2542
Raschiatore Special

150062542
0-28881: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-202-7789
Molla A Gas

152027789
C55119485000: RNCC: 3 | RNVC: 2
(241)A7904C55119485000: RNCC: 5 | RNVC: 2

10 Jul 2007

5340-15-153-7152
Line Supporting Strap

151537152
142024034: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-163-2806
Helical Compression Spring Seat

151632806
6410.017: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-105-6295
Collare Serraggio

151056295
378060: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-121-5795
Resilient Mount

151215795
80786/1-Z3: RNCC: 3 | RNVC: 2

18 Sep 1996

5340-15-174-6599
Drive End Bracket M

151746599
2001052020: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-15-108-2765
Coperchio Di Access

151082765
01-02-344-12G: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-125-3470
Tassello Elastico

151253470
7683364: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-060-8241
Control Rod

150608241
000200269100: RNCC: 5 | RNVC: 2
000200269100: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-205-0562
Asta Fissaggio

152050562
120021275: RNCC: 3 | RNVC: 2
(241)A5009120021275: RNCC: 5 | RNVC: 2

16 Feb 2012

5340-15-126-2943
Escutcheon Plate

151262943
FGPRES30A: RNCC: 3 | RNVC: 2
FGPRES30A: RNCC: 5 | RNVC: 2
FGPRES30A: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-151-1162
Staffa Per Tubazion

151511162
J26240210-401: RNCC: 3 | RNVC: 2

21 Mar 2000

5340-15-203-1809
Support

152031809
MSP224-05: RNCC: 3 | RNVC: 2

28 Nov 2007

5340-15-122-2686
Nonmetallic Bumper

151222686
800043590: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-151-5499
Dust And Moisture Seal Protective Cap-Plug

151515499
970059: RNCC: 3 | RNVC: 2

7 Jun 2000

5340-15-203-1949
Hinge

152031949
12HJ04343435S01-433/5: RNCC: 3 | RNVC: 2

28 Nov 2007

5340-15-157-2435
Shock Mount Pad

151572435
DE069.95.025: RNCC: 3 | RNVC: 2
(241)A5015DE069.95.025: RNCC: 5 | RNVC: 2

9 Jun 2003

5340-15-166-4931
Staffa Tasca Pannel

151664931
4792192: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-000-4939
Rod

150004939
13HJ04643228S01-415-001: RNCC: 3 | RNVC: 2
(241)A001913HJ04643228S01-415-00: RNCC: 5 | RNVC: 2

11 Mar 2013

5340-15-124-1719
Tappo Di Protezione

151241719
TP500080201C280800: RNCC: 3 | RNVC: 2
TP500080201C280800: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-154-8839
Rubber Bumper

151548839
12-G-70: RNCC: 3 | RNVC: 2

7 Nov 2001

5340-15-105-9140
Headless Straight Rod

151059140
4-581: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-109-9664
Supportocompleto

151099664
109-0512-48-5: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-15-115-8474
Angle Rear

151158474
277076P1: RNCC: 3 | RNVC: 2
71-01-001-087: RNCC: 3 | RNVC: 2

1 Feb 1993

5340-15-125-4596
Lucchetto Di Sicure

151254596
VIROTS: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-147-5769
Window Cabine

151475769
982150085: RNCC: 3 | RNVC: 2

30 Dec 1997

5340-15-002-0977
Pad Eye

150020977
500404898: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-002-1442
Bumper

150021442
42566689: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-114-3156
Leva

151143156
CF415416: RNCC: 3 | RNVC: 2

4 Jun 1992

5340-15-159-9619
Dust And Moisture Seal Protective Plug

151599619
121226140: RNCC: 3 | RNVC: 2

19 Apr 2004

5340-15-110-4458
Mount Resilient

151104458
42015385: RNCC: 3 | RNVC: 2
42015385: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-159-4723
Padlock

151594723
PN UAS 00002549: RNCC: 3 | RNVC: 2
9999F76003708: RNCC: 5 | RNVC: 9

31 Mar 2004

5340-15-115-5423
Supporto Per Strozz

151155423
D0470490: RNCC: 3 | RNVC: 2

24 Mar 1994

5340-15-007-7688
Metal Runner

150077688
767347: RNCC: 3 | RNVC: 2
767347: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-007-1965
Nut And Bolt Locking Plate

150071965
1390160: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-117-1193
Corrosion Preventive Anode

151171193
139203: RNCC: 3 | RNVC: 2

15 May 1995

5340-15-143-2800
Manual Control Handle

151432800
800083257: RNCC: 3 | RNVC: 2
(241)A3258800083257: RNCC: 5 | RNVC: 2

10 Dec 1996

5340-15-152-1246
Double Angle Bracket

151521246
60165367: RNCC: 3 | RNVC: 2

7 Aug 2000

5340-15-003-1073
Nut And Bolt Locking Plate

150031073
182719637: RNCC: 3 | RNVC: 2
(241)A0199182719637: RNCC: 5 | RNVC: 2

25 Oct 2013

5340-15-119-9804
Threaded End Tensioning Tie Rod

151199804
78437F01: RNCC: 3 | RNVC: 2
78437F01: RNCC: 5 | RNVC: 9

28 May 1996

5340-15-063-9225
Supporto Antivibran

150639225
2640-70017: RNCC: 3 | RNVC: 2
2640-70017: RNCC: 5 | RNVC: 9

6 Dec 1982

5340-15-232-2866
Plate

152322866
9009.3161-1: RNCC: 3 | RNVC: 2
534015E116382: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-179-0027
Support

151790027
RS 412 137 B: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-155-4424
Overturning Clamp

151554424
CBD71047P04: RNCC: 3 | RNVC: 2

25 Mar 2002

5340-15-189-3690
Clamp

151893690
120503002: RNCC: 3 | RNVC: 2

17 Feb 2010

5340-15-124-3827
Prolunga Lunghezza

151243827
360.011: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-100-7111
Resilient Mount

151007111
447/AMM: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-231-9064
Supporto Molla

152319064
8188702: RNCC: 3 | RNVC: 2
534015E114316: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-237-7420
Squadra Alluminio

152377420
502.400.01: RNCC: 3 | RNVC: 2
534015E082742: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-185-9250
Tappo

151859250
SP6: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-156-2134
Support

151562134
(241)A3460CBD70761P11: RNCC: 3 | RNVC: 2
CBD70761P11: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-232-4706
Ruota 60X24 Mm. Gom

152324706
SC154S: RNCC: 3 | RNVC: 2
534015E100998: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-152-4740
Bracket

151524740
NN77716P01: RNCC: 3 | RNVC: 2

18 Sep 2000

5340-15-220-0056
Stop Con Occhiello

152200056
S012: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-009-0000
Helical Compression Spring Retainer

150090000
746374: RNCC: 3 | RNVC: 2
746374: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-110-7022
Dust And Moisture Seal Protective Cover

151107022
7747150322: RNCC: 3 | RNVC: 2

9 Jan 1990

5340-15-233-1819
Tirante Per Estinto

152331819
SP11: RNCC: 3 | RNVC: 2
534015E062780: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-053-5242
Spacer

150535242
2-0491-201-41455-2: RNCC: 3 | RNVC: 2

7 Oct 1981

5340-15-101-3012
Adaptor Holding

151013012
MRA 881-5: RNCC: 3 | RNVC: 2

30 Jan 1988

5340-15-206-5940
Sostegno Elastico

152065940
VZA-R-AVU-200: RNCC: 3 | RNVC: 2
(241)A4997VZA-R-AVU-200: RNCC: 5 | RNVC: 2

26 Jun 2012

5340-15-137-0853
Guarnizione

151370853
66222: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-123-2009
Molla

151232009
75527004: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-154-1798
Ingranaggio

151541798
130792: RNCC: 3 | RNVC: 2

27 Mar 2001

5340-15-139-7109
Bloccaggio Pianale

151397109
A.0151100: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-153-7667
Base (1) Per Sosteg

151537667
01830A115870: RNCC: 5 | RNVC: 2
T0064340: RNCC: 5 | RNVC: 2
01830A115870: RNCC: 5 | RNVC: 9

27 Feb 2001

5340-15-179-0024
Cover Plate

151790024
RS 412 116 A: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-160-8918
Lucchetto G.

151608918
F720175441: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-115-2219
Kit

151152219
C1980: RNCC: 3 | RNVC: 2
91635037: RNCC: 5 | RNVC: 2

29 Nov 1992

5340-15-213-7205
Tassello Di Plastic

152137205
TASSELLO8MM: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-180-5966
Compl Semichiusura

151805966
162505022: RNCC: 3 | RNVC: 2

24 Jun 2008

5340-15-122-5524
Link Tube

151225524
01TL21255: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-156-2038
Bracket

151562038
(241)A3460CBD71196P02: RNCC: 3 | RNVC: 2
CBD71196P02: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-112-3751
Control Rod

151123751
8586757: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-115-7118
Flangia Tubo Misura

151157118
D0468867: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-110-7024
Dust And Moisture Seal Protective Cover

151107024
7747160322: RNCC: 3 | RNVC: 2

9 Jan 1990

5340-15-202-4552
Structual Angle

152024552
03253: RNCC: 3 | RNVC: 2
(241)A553603253: RNCC: 5 | RNVC: 2

26 Mar 2007

5340-15-101-7833
Fascetta Speciale

151017833
SC32674.77S: RNCC: 3 | RNVC: 2

21 Jul 1987

5340-15-199-4956
Supporto Per Pulegg

151994956
63157F01: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-15-153-7113
Rubber Bumper

151537113
142021336: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-237-7421
Giunto Universale 1

152377421
505.163.01: RNCC: 3 | RNVC: 2
534015E082743: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-189-2740
Electrical Receptacle Connector

151892740
D0603074: RNCC: 3 | RNVC: 2

10 Feb 2010

5340-15-119-9617
Helical Compression Spring Seat

151199617
73387F01: RNCC: 3 | RNVC: 2
73387F01: RNCC: 5 | RNVC: 9

22 May 1996

5340-15-153-2927
Headless Straight Rod

151532927
122510112: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-15-061-3783
Supporto Metallico

150613783
P26CA88: RNCC: 5 | RNVC: 2
P26CA88: RNCC: 5 | RNVC: 9

22 Sep 1977

5340-15-182-6930
Piastra Ancoraggio

151826930
1601010: RNCC: 3 | RNVC: 2
1601010: RNCC: 5 | RNVC: 9

30 Dec 2008

5340-15-127-3910
Molla

151273910
341357: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-123-9029
Confez.100 Pz Fasce

151239029
8AB004500: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-219-8574
Confezione Graffett

152198574
31011440: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-149-5983
Bracket

151495983
1230-32-110: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-111-3870
Piastra Di Rinforzo

151113870
129-0101-14-101: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-15-150-9310
Supporto Scorrevol

151509310
650.500.15: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-15-179-9086
Plug

151799086
79035329: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-166-4984
Plug End

151664984
200A0007001: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-175-0449
Cap

151750449
15238: RNCC: 3 | RNVC: 2

29 Dec 2003

5340-15-158-5594
Rubber Bumper

151585594
122607462: RNCC: 3 | RNVC: 2

9 Mar 2004

5340-15-139-7548
Catenella Anello

151397548
0007370: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-149-3142
Arresto Di Sicurezz

151493142
4886072: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-156-2123
Piastra Di Montaggi

151562123
(241)A3460CBD71276P04: RNCC: 3 | RNVC: 2
CBD71276P04: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-155-4941
Roll Support

151554941
CBD71130P02: RNCC: 3 | RNVC: 2

28 Mar 2002

5340-15-149-0082
Turnbuckle

151490082
00081853: RNCC: 3 | RNVC: 2

17 Nov 1998

5340-15-156-3358
Half Rings

151563358
CBD71224P01: RNCC: 3 | RNVC: 2
(241)A3460CBD71224P01: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-15-156-0479
Anodo Anticorrosion

151560479
W021720: RNCC: 3 | RNVC: 2
(241)A2309W021720: RNCC: 5 | RNVC: 2

15 Nov 2002

5340-15-201-4934
Rubber Bumper

152014934
N523G5251201: RNCC: 3 | RNVC: 2
(241)A0126N523G5251201: RNCC: 5 | RNVC: 2

3 Oct 2006

5340-15-122-5801
Anchor Strap

151225801
9265.152: RNCC: 3 | RNVC: 2

10 Sep 1996

5340-15-111-3834
Cernierasagomataspe

151113834
117A1120-402: RNCC: 3 | RNVC: 2

7 Sep 1990

5340-15-191-8026
Elettrosaldatura

151918026
11731-70-2: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-121-8589
Clamp

151218589
2300-92073: RNCC: 3 | RNVC: 2

12 Mar 1996

5340-15-009-0631
Helical Compression Spring Seat

150090631
4154552: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-051-3285
Resilient Mount

150513285
4507085: RNCC: 3 | RNVC: 2
4507085: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-105-6373
Collare Serraggio

151056373
10115701: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-139-7864
Staffa Fissaggio

151397864
1000901: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-119-1277
Helical Compression Spring Seat

151191277
73122423: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-138-2873
Copritoppa Interno

151382873
06143-00: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-118-9956
Helical Compression Spring Seat

151189956
9817548: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-113-8594
Threaded End Tensioning Tie Rod

151138594
1Z 590602: RNCC: 3 | RNVC: 2
1Z 590602: RNCC: 5 | RNVC: 9

13 Jun 1994

5340-15-108-7168
Double Angle Bracket

151087168
60156661: RNCC: 3 | RNVC: 2

24 Feb 1989

5340-15-181-0566
Engine Accessory Bracket

151810566
071673: RNCC: 3 | RNVC: 2
(241)A3593071673: RNCC: 5 | RNVC: 2

10 Oct 2008

5340-15-194-7293
Angle Bracket

151947293
504082779: RNCC: 3 | RNVC: 2

10 Jan 2011

5340-15-103-1604
Control Rod

151031604
L5200366: RNCC: 3 | RNVC: 2
DE160.03.217: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-213-8882
Maniglia Premi-Apri

152138882
13BLTB80: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-001-1077
Angle Bracket

150011077
5801348229: RNCC: 3 | RNVC: 2

31 May 2013

5340-15-163-1207
Clip

151631207
14631387: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-155-8255
Harness Bracket

151558255
4112T40G01: RNCC: 3 | RNVC: 2
4112T40G01: RNCC: 3 | RNVC: 2

11 Jul 2002

5340-15-166-5030
Bracket

151665030
311A2510003: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-156-3330
Removal Drift Assy

151563330
(241)A3460CBD71222G01: RNCC: 3 | RNVC: 2
CBD71222G01: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-15-146-3749
Lucchetto Marca Cor

151463749
534015C000004: RNCC: 3 | RNVC: 2

11 Jul 1997

5340-15-115-2729
Support

151152729
113710145: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-148-7086
Manual Control Lever

151487086
W030594A: RNCC: 3 | RNVC: 2

28 Sep 1998

5340-15-063-9774
Helical Compression Spring Retainer

150639774
3908.0416: RNCC: 3 | RNVC: 2

7 Sep 1983

5340-15-207-8294
Spacing Threaded Standoff

152078294
D8406712: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-105-5974
Staffa A Gomito

151055974
590461: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-199-9243
Corrosion Preventive Anode

151999243
1/2POLL-ARMCO: RNCC: 3 | RNVC: 2

27 Jul 2005

5340-15-118-3361
Resilient Mount

151183361
60142698: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-149-6166
Lever

151496166
518-38-1760: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-050-7156
Handwheel

150507156
41774-16: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-154-9322
Dust And Moisture Seal Protective Cap-Plug

151549322
CBD71055G01: RNCC: 3 | RNVC: 2

13 Nov 2001

5340-15-102-8937
Helical Compression Spring Seat

151028937
1P269856: RNCC: 3 | RNVC: 2
1P269856: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-181-0582
Engine Accessory Bracket

151810582
071684: RNCC: 3 | RNVC: 2
(241)A3593071684: RNCC: 5 | RNVC: 2

10 Oct 2008

5340-15-003-9165
Rod End Locking Retainer

150039165
182703016: RNCC: 3 | RNVC: 2
(241)A0199182703016: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-213-8870
Contropiastra In Me

152138870
06463-22: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-156-3592
Support Angular

151563592
(241)A3460CBD71442P01: RNCC: 3 | RNVC: 2
CBD71442P01: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-102-7085
Dust And Moisture Seal Protective Cap

151027085
95967001: RNCC: 3 | RNVC: 2

10 Aug 1987

5340-15-198-5524
Multiple Angle Bracket

151985524
4153T20G01: RNCC: 3 | RNVC: 2
(241)A34604153T20G01: RNCC: 5 | RNVC: 2

13 Oct 2004

5340-15-118-0097
Control Rod

151180097
1P 241987: RNCC: 3 | RNVC: 2
1P 241987: RNCC: 5 | RNVC: 9

28 Jan 1995

5340-15-003-7344
Nastro Adesivo In A

150037344
458-7416: RNCC: 3 | RNVC: 2
(241)AA136458-7416: RNCC: 5 | RNVC: 2

20 Nov 2013

5340-15-118-0844
Headless Grooved Rod

151180844
D0467837: RNCC: 3 | RNVC: 2
467837: RNCC: 3 | RNVC: 2

2 Dec 1994

5340-15-147-0941
Air Inlet-Outlet Frame

151470941
284.606.017B: RNCC: 3 | RNVC: 2

21 Aug 1997

5340-15-075-4501
Dust And Moisture Seal Protective Cap

150754501
B3T18: RNCC: 3 | RNVC: 2

1 Apr 1998

5340-15-180-3954
Reinforcement Ring

151803954
N925G9178201: RNCC: 3 | RNVC: 2

12 May 2008

5340-15-120-4950
Anodi Anticcorosion

151204950
14442/9/4: RNCC: 3 | RNVC: 2
1P 559708: RNCC: 3 | RNVC: 2
1P 559708: RNCC: 5 | RNVC: 9

14 Nov 1995

5340-15-175-4175
Storage Plug

151754175
NOR385-8: RNCC: 3 | RNVC: 2
NOR385-8: RNCC: 5 | RNVC: 9

14 Feb 2004

5340-15-205-4949
Dust And Moisture Seal Protective Cap-Plug

152054949
182702114: RNCC: 3 | RNVC: 2
(241)A0199182702114: RNCC: 5 | RNVC: 2

14 Mar 2012

5340-15-104-8904
Fissaggio Gaffetta

151048904
23251: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-187-1529
Spacing Threaded Standoff

151871529
40110017: RNCC: 3 | RNVC: 2

19 Feb 2009

5340-15-202-5900
Protect Blank Panel

152025900
N710U5004201: RNCC: 3 | RNVC: 2
(241)A0126N710U5004201: RNCC: 5 | RNVC: 2

20 May 2007

5340-15-001-5424
Headless Grooved Rod

150015424
182704105: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-15-235-8823
Colonnetta Ruote

152358823
21020997: RNCC: 3 | RNVC: 2
534015E099906: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-170-3409
Bracket Assembly

151703409
212-076-022-1: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-060-8911
Helical Compression Spring Retainer

150608911
000200576000: RNCC: 5 | RNVC: 2
000200576000: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-204-3456
Corrosion Preventive Anode

152043456
3031436745P: RNCC: 3 | RNVC: 2
(241)ACA643031436745P: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-150-0769
Bracket Assembly

151500769
326422-501: RNCC: 3 | RNVC: 2
326422-501: RNCC: 5 | RNVC: 9

29 Jul 1999

5340-15-153-7362
Forcella Testa Di T

151537362
142057284: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-214-1499
Supporto Rotante Pe

152141499
90: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-188-7818
Threaded End Tensioning Tie Rod

151887818
A469A001A285: RNCC: 3 | RNVC: 2
(241)A0126A469A001A285: RNCC: 5 | RNVC: 2

17 Nov 2009

5340-15-117-7125
Resilient Mount

151177125
1Q 520096LB: RNCC: 3 | RNVC: 2
1Q 520096LB: RNCC: 5 | RNVC: 9

23 Nov 1994

5340-15-196-9922
Padlock

151969922
PN UAS 00016015: RNCC: 3 | RNVC: 2
5340F76016028: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-178-5442
Manual Control Lever

151785442
1C.08901332: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-213-8788
Piastra Regolabile

152138788
465IBFM4RULLI: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-115-7033
Supporto Scatola Se

151157033
D0470356: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-193-6982
Utility Resilient Mount

151936982
98401286: RNCC: 3 | RNVC: 2
(241)AF51098401286: RNCC: 5 | RNVC: 2

2 Jul 2010

5340-15-195-6001
Special Protezione

151956001
1304983: RNCC: 3 | RNVC: 2
(241)AG3811304983: RNCC: 5 | RNVC: 2

8 Apr 2011

5340-15-219-9517
Maniglie Con Placch

152199517
MANIGLIA-FORO BUSSOLA: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-049-7524
Fascetta

150497524
AB47-706-217-16: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-180-3174
Dust And Moisture Seal Protective Cover

151803174
(241)A4249504091655: RNCC: 3 | RNVC: 2
504091655: RNCC: 3 | RNVC: 2

18 Apr 2008

5340-15-206-3541
Angle Bracket

152063541
50040 2736: RNCC: 3 | RNVC: 2

4 Jun 2012

5340-15-118-2595
Headless Grooved Rod

151182595
D0484925: RNCC: 3 | RNVC: 2

10 Apr 1995

5340-15-007-9670
Nut And Bolt Locking Plate

150079670
4315446: RNCC: 3 | RNVC: 2
4315446: RNCC: 5 | RNVC: 9

22 Sep 1979

5340-15-180-2273
Dust And Moisture Seal Protective Plug

151802273
76066676: RNCC: 3 | RNVC: 2

15 Feb 2008

5340-15-074-4121
Turnbuckle

150744121
2C12UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-115-5412
Control Rod

151155412
D0469600: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-215-3786
Chiudiporta Mab 564

152153786
MAB564: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-116-8636
Double Angle Bracket

151168636
D1402635: RNCC: 3 | RNVC: 2

8 Apr 1994

5340-15-214-7371
Montante Angolare

152147371
ANGOLARE5340: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-127-4328
Molla Richiamo Cepp

151274328
1740-53-009: RNCC: 3 | RNVC: 2
1740-53-009: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-009-0916
Cover Plate Access

150090916
1141-38-013: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-114-8264
Bloccaschede

151148264
62310-27/001: RNCC: 3 | RNVC: 2

12 Aug 1992

5340-15-122-6588
Protezione Commutat

151226588
74-04746: RNCC: 3 | RNVC: 2

27 Sep 1996

5340-15-206-2980
Manual Contr Handle

152062980
324AM06000-002: RNCC: 3 | RNVC: 2

1 Jun 2012

5340-15-001-7947
Dust And Moisture Seal Protective Cap

150017947
41297046: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-135-9856
Ammortizzatore

151359856
736-803: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-197-6944
Dust And Moisture Seal Protective Cap-Plug

151976944
640060: RNCC: 3 | RNVC: 2

20 Apr 2004

5340-15-108-7169
Double Angle Bracket

151087169
60153726: RNCC: 3 | RNVC: 2

24 Feb 1989

5340-15-114-9681
Dust And Moisture Seal Protective Plug

151149681
108274: RNCC: 3 | RNVC: 2

8 Mar 1993

5340-15-212-1009
Chiavi Grezze

152121009
CHIAVE 052: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-118-3861
Resilient Mount

151183861
60156933: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-009-5833
Cover Plate Access

150095833
75466712: RNCC: 3 | RNVC: 2
9983517: RNCC: 5 | RNVC: 2
75466712: RNCC: 5 | RNVC: 9

22 Sep 1979

5340-15-213-0478
Tasselli A Vite Spo

152130478
M6-60X12: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-134-6318
Tassello Elasti

151346318
10326: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-105-6347
Collare Serraggio

151056347
10418805: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-105-8168
Sostegno Elastico

151058168
14566: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-107-4413
Turnbuckle Body

151074413
1233602451: RNCC: 3 | RNVC: 2
1233602451: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-162-2376
Ergot

151622376
126065: RNCC: 3 | RNVC: 2
B1136017: RNCC: 5 | RNVC: 2

17 May 2001

5340-15-149-8720
Housing

151498720
3594-42: RNCC: 3 | RNVC: 2
3594-42: RNCC: 5 | RNVC: 9

16 Jun 1999

5340-15-112-2922
Fermo Speciale

151122922
263A1749-001: RNCC: 3 | RNVC: 2

10 Apr 1991

5340-15-122-9230
Inserto

151229230
999-5000-61-408: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-153-6981
Tappo Di Protezione

151536981
121106162: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-105-8506
Double Angle Bracket

151058506
001.9785.0: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-179-1898
Manual Control Handle

151791898
VKIC32REP2: RNCC: 3 | RNVC: 2

13 Jun 2006

5340-15-139-3730
Staffa

151393730
42034551: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-120-6814
Supporto Microinter

151206814
D0487323: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-120-9287
Semicerniera

151209287
113A6012-753: RNCC: 3 | RNVC: 2

5 Sep 1995

5340-15-135-9715
Tirante Elastico

151359715
1388549: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-066-0077
Pcboard Assy

150660077
P42162: RNCC: 3 | RNVC: 2

11 Mar 1986

5340-15-148-5210
Window Regulator Handle

151485210
98444271: RNCC: 3 | RNVC: 2

13 Aug 1999

5340-15-147-9113
Disque Ep. 2.8 Mm

151479113
110642: RNCC: 3 | RNVC: 2

18 May 1998

5340-15-180-3944
Corrosion Preventive Anode

151803944
5852526101DM: RNCC: 3 | RNVC: 2
(241)A31215852526101DM: RNCC: 5 | RNVC: 2

8 May 2008

5340-15-141-9459
Anodo

151419459
2SITA134.1: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-153-9293
Handwheel

151539293
L152/70: RNCC: 2 | RNVC: 3
142016263: RNCC: 5 | RNVC: 3

12 Mar 2001

5340-15-187-6689
Small Picket Galvan

151876689
6142056712: RNCC: 3 | RNVC: 2
(241)S56526142056712: RNCC: 5 | RNVC: 2

21 Apr 2009

5340-15-118-0316
Supporto Portaguarn

151180316
D0467437: RNCC: 3 | RNVC: 2

1 Dec 1994

5340-15-003-8871
Dust And Moisture Seal Protective Cover

150038871
182713017: RNCC: 3 | RNVC: 2
(241)A0199182713017: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-118-4164
Electrical-Me Post

151184164
145504134: RNCC: 3 | RNVC: 2

30 May 1994

5340-15-107-9190
Corrosion Preventive Anode

151079190
13.02.3/4381POS.1: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-007-2205
Eye Hook

150072205
1397262: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-111-8225
Supportomanopolaacc

151118225
00080165: RNCC: 3 | RNVC: 2

1 Jul 1990

5340-15-117-5514
Resilient Mount

151175514
VZA 130: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-15-115-2305
End Stop Support

151152305
518021280: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-109-1231
Rubber Bumper

151091231
60125714: RNCC: 3 | RNVC: 2

30 Apr 1988

5340-15-215-0631
Leva Per Estintore

152150631
LEVAPERSTINTORE: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-212-4412
Serratura Elettrica

152124412
2000: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-212-5125
Tasselli Fischer Fu

152125125
ART2245: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-112-8544
Fermor

151128544
471327: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-236-8474
Orlo Sottovite Nich

152368474
180A0460122: RNCC: 3 | RNVC: 2
534015E024594: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-207-3641
Sliding Block

152073641
00082445: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-15-103-4469
Hefboom Vergrendeli

151034469
145860/802: RNCC: 3 | RNVC: 2
UXAB259299R028: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-107-1731
Rubber Bumper

151071731
C3695655: RNCC: 3 | RNVC: 2

24 May 1989

5340-15-139-9278
Elemento Elastico

151399278
I270RA: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-166-4814
Squadretta

151664814
DE03820330713: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-063-3586
Resilient Mount

150633586
4467475: RNCC: 3 | RNVC: 2
04467475: RNCC: 5 | RNVC: 2

15 Oct 1982

5340-15-074-4267
Turnbuckle

150744267
1A30UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-142-0750
Handwheel

151420750
W002555: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-101-7456
Piastra Forata

151017456
P15: RNCC: 3 | RNVC: 2

4 Feb 1994

5340-15-185-9037
Ruota Rivestita In

151859037
RUOTAGIR.MM125X125: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-075-7502
Handwheel

150757502
49: RNCC: 3 | RNVC: 2

1 May 1981

5340-15-200-3479
Supporto

152003479
79055618: RNCC: 3 | RNVC: 2
79055618: RNCC: 5 | RNVC: 2
(241)AD75179055618: RNCC: 5 | RNVC: 2

14 Dec 2005

5340-15-103-0746
Dust And Moisture Seal Protective Cap-Plug

151030746
L2135072: RNCC: 3 | RNVC: 2
DE160.03.080: RNCC: 5 | RNVC: 2
(241)A5015DE160.03.080: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-107-8839
Dust And Moisture Seal Protective Cap-Plug

151078839
08-184: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-189-2739
Electrical Receptacle Connector

151892739
D0600368: RNCC: 3 | RNVC: 2

10 Feb 2010

5340-15-166-4824
Attacco

151664824
20506080221: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-202-8114
Turnbuckle

152028114
NTH 01/05 TSR.011.106: RNCC: 3 | RNVC: 2
(241)AG057NTH01/05TSR.011.106: RNCC: 5 | RNVC: 2

16 Jul 2007

5340-15-212-1426
Tassello In Nylon 0

152121426
S6CV: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-107-4464
Electrical-Me Post

151074464
1P 513169: RNCC: 3 | RNVC: 2
1P 513169: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-202-7544
Towbar Bracket

152027544
2530: RNCC: 3 | RNVC: 2
(241)A49912530: RNCC: 5 | RNVC: 2

4 Jul 2007

5340-15-163-1244
Support

151631244
1310345080: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-074-4253
Turnbuckle

150744253
2D22UNI2019AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-117-0487
Supporting Ring

151170487
D0483492: RNCC: 3 | RNVC: 2
483492: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-113-9940
Calotta Stella Cent

151139940
D0473253: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-15-147-5806
T-Fitting

151475806
98RV976: RNCC: 3 | RNVC: 2

30 Dec 1997

5340-15-149-3074
Piastrina Di Sicure

151493074
4885830: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-203-9512
Ring

152039512
367.1304.0000: RNCC: 3 | RNVC: 2
(241)AF479367.1304.0000: RNCC: 5 | RNVC: 2

29 Jul 2011

5340-15-127-6019
Blocchetto Non File

151276019
991474: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-116-8474
Control Rod

151168474
D0469524: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-15-180-0521
Positioning Thrust Stop

151800521
9571500: RNCC: 3 | RNVC: 2

16 Nov 2007

5340-15-045-4077
Clip

150454077
N0R2-422-00-3: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-220-0504
Lamiera Elcom Sys L

152200504
S1-145N: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-231-7918
Picchetto Pesante C

152317918
UT/SA/0009/25: RNCC: 3 | RNVC: 2
534015E122766: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-110-7893
Raccordospeciale

151107893
109-0406-56-1: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-15-185-4662
Beccucci Per Cartuc

151854662
09123: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-211-4864
Molla Per Troncatri

152114864
NOREFMOLLA: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-049-7530
Fascetta

150497530
AB47-706-217-10: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-181-1699
Protezione

151811699
178919233: RNCC: 3 | RNVC: 2
(241)A0199178919233: RNCC: 5 | RNVC: 2

5 Nov 2008

5340-15-105-6691
Porta Maniglia

151056691
4973699: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-112-8324
Control Rod

151128324
471251: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-199-3793
Manovella

151993793
4.49210.003.00: RNCC: 3 | RNVC: 2
(241)A39630000000132838: RNCC: 5 | RNVC: 2
0000000132838: RNCC: 5 | RNVC: 2

13 Mar 2005

5340-15-169-4064
Lucchetto C.

151694064
F72011623: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-001-8539
Cap

150018539
ED0089650050-S: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-207-5955
Dust And Moisture Seal Protective Cap-Plug

152075955
86.O.06800P: RNCC: 3 | RNVC: 2
(241)A393686.O.06800P: RNCC: 5 | RNVC: 2

5 Nov 2012

5340-15-006-2409
Coperchio Speciale

150062409
0-20345: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-203-0320
Supporto Alternator

152030320
1130121: RNCC: 3 | RNVC: 2
(241)A50091130121: RNCC: 5 | RNVC: 2

19 Nov 2007

5340-15-147-5798
T-Fitting

151475798
98RV744: RNCC: 3 | RNVC: 2

30 Dec 1997

5340-15-203-0366
Spina Portello Dist

152030366
033090068: RNCC: 3 | RNVC: 2
(241)A5009033090068: RNCC: 5 | RNVC: 2

19 Nov 2007

5340-15-235-6146
Portachiavi In Otto

152356146
246: RNCC: 3 | RNVC: 2
534015E081067: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-103-2131
Shock Absorber Bulk

151032131
Q421071022: RNCC: 3 | RNVC: 2

11 Jan 1989

5340-15-103-4126
Sprayer Ring

151034126
276447ART70: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-236-7923
Moschettone In Acci

152367923
HOD060: RNCC: 3 | RNVC: 2
534015E019947: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-060-8056
Handwheel

150608056
016200064500: RNCC: 5 | RNVC: 2
1200096-134000017: RNCC: 5 | RNVC: 2
016200064500: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-112-3467
Rubber Bumper

151123467
93809649: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-232-9076
Rotella Teflon

152329076
101: RNCC: 3 | RNVC: 2
534015E074562: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-162-1843
Latch Ball

151621843
14053: RNCC: 3 | RNVC: 2

3 Apr 2001

5340-15-056-3159
Distanziatore

150563159
69567C47: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-074-4434
Turnbuckle

150744434
2B27UNI20212N: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-166-5056
C Linder

151665056
46143001: RNCC: 3 | RNVC: 2
46143001: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-231-1136
Lucchetto Mm.30

152311136
301: RNCC: 3 | RNVC: 2
534015E089800: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-121-8866
Maniglia A Ripresa

151218866
MR63PM6X20: RNCC: 3 | RNVC: 2

19 Mar 1996

5340-15-198-4269
Manual Control Lever

151984269
162505249: RNCC: 3 | RNVC: 2

27 Sep 2004

5340-15-193-2344
Piastra Di Montaggi

151932344
504161756: RNCC: 3 | RNVC: 2
(241)A4249504161756: RNCC: 5 | RNVC: 2

22 Apr 2010

5340-15-006-0146
Anchor Strap

150060146
B512TL221: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-194-3434
Universal Adjustable Chock

151943434
311771F01: RNCC: 3 | RNVC: 2

4 Nov 2010

5340-15-120-0955
Resilient Mount

151200955
36025469: RNCC: 3 | RNVC: 2
93160551: RNCC: 5 | RNVC: 2

19 Dec 1994

5340-15-207-8686
Angle Bracket

152078686
504373396: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-001-5757
Liquid Holding Unit Filler Neck

150015757
20.867.02: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-219-9733
Cerniera 2 Ali Cm.1

152199733
402/14: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-154-1430
Staffa Per Molla

151541430
0-115049: RNCC: 3 | RNVC: 2
(241)A39630-115049: RNCC: 5 | RNVC: 2
1PA39630-115049: RNCC: 5 | RNVC: 2

22 Mar 2001

5340-15-059-2077
Supporto Elastico

150592077
160-0136-01A: RNCC: 3 | RNVC: 2

19 Jun 1974

5340-15-101-7813
Fascetta Speciale

151017813
SC32673.10: RNCC: 3 | RNVC: 2

21 Jul 1987

5340-15-204-9580
Riduzione

152049580
647000000217: RNCC: 3 | RNVC: 2
(241)AK137647000000217: RNCC: 5 | RNVC: 2

2 Feb 2012

5340-15-153-9231
Base (1) Per Sosteg

151539231
142003184: RNCC: 2 | RNVC: 3

12 Mar 2001

5340-15-107-5754
Piattello Tenuta Mo

151075754
DE160.03.373: RNCC: 3 | RNVC: 2

5 Jan 1989

5340-15-115-5410
Control Rod

151155410
D0469601: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-217-4840
Fascette Fermacavo

152174840
178-507: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-180-8616
Staffa

151808616
113081114: RNCC: 3 | RNVC: 2
(241)A0199113081114: RNCC: 5 | RNVC: 2

29 Jul 2008

5340-15-168-9079
Padlock

151689079
F71013128: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-169-0637
Padlock

151690637
F72005928: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-118-0381
Semicavallotto Bloc

151180381
484516: RNCC: 3 | RNVC: 2
D0484516: RNCC: 3 | RNVC: 2

14 Dec 1994

5340-15-109-8973
Obturator

151098973
369888: RNCC: 3 | RNVC: 2
D0369888: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-040-1639
Fascetta

150401639
1-2756-125-24446-4: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-170-3880
Plate

151703880
205-061-643-1: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-155-0957
Spe Arresto A Leva

151550957
121104113: RNCC: 3 | RNVC: 2
USM55-23: RNCC: 3 | RNVC: 2

18 Jan 2002

5340-15-118-4324
Mensola Completa

151184324
60153285: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-199-1291
Manicotto Per Cavo

151991291
AGRULUX 10: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-15-074-4284
Turnbuckle

150744284
2A12UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-001-6726
Molla

150016726
174053001: RNCC: 3 | RNVC: 2
174053001: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-134-6422
Staffa Superiore

151346422
4709504: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-148-6566
Access Cover

151486566
190525201: RNCC: 3 | RNVC: 2

17 Sep 1998

5340-15-107-1718
Right Hand Hinge

151071718
RS412295A: RNCC: 3 | RNVC: 2

24 May 1989

5340-15-213-8786
Ruota Con Supporto

152138786
RUOTA100MM: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-217-6897
Pinza Rossa 175Mm

152176897
99350: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-001-0291
Utility Resilient Mount

150010291
504378403: RNCC: 3 | RNVC: 2

15 May 2013

5340-15-066-4081
Tappo Presa Aria Co

150664081
68-903050-405: RNCC: 3 | RNVC: 2

25 Oct 1985

5340-15-154-1041
Headless Straight Rod

151541041
0-140578: RNCC: 3 | RNVC: 2
(241)A39630-140578: RNCC: 5 | RNVC: 2
1PA39630-140578: RNCC: 5 | RNVC: 2

21 Mar 2001

5340-15-113-7945
Cerniera Portello A

151137945
129-0640-57-101: RNCC: 3 | RNVC: 2

27 Feb 1992

5340-15-152-1348
Staffa Completa

151521348
500325385: RNCC: 3 | RNVC: 2

7 Aug 2000

5340-15-154-9186
Dust And Moisture Seal Protective Cap

151549186
5657-6-6S: RNCC: 3 | RNVC: 2

12 Nov 2001

5340-15-158-3707
Nut And Bolt Retainer

151583707
8.090.539: RNCC: 3 | RNVC: 2

22 Jan 2004

Load More Results