What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 43 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 43 of 72

5340-15-007-2147
Turnbuckle

150072147
1383438: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-136-2867
Staffetta

151362867
5994353: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-156-6503
Snap Hook

151566503
MAX800USE230KGINOX: RNCC: 3 | RNVC: 2

3 Mar 2003

5340-15-115-2325
Locking

151152325
2300-91401: RNCC: 3 | RNVC: 2
NJ4: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-122-1615
Dado Porta Cappucci

151221615
121130196: RNCC: 3 | RNVC: 2

28 May 1996

5340-15-217-1367
Serratura Elettrica

152171367
ART12011: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-207-4382
Dust And Moisture Seal Protective Cover

152074382
4725197: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-15-009-6061
Dust And Moisture Seal Protective Cap

150096061
75467111: RNCC: 3 | RNVC: 2
9982573: RNCC: 5 | RNVC: 2
75467111: RNCC: 5 | RNVC: 9

22 Sep 1979

5340-15-147-0949
Dust And Moisture Seal Boot

151470949
27.11.76.15: RNCC: 3 | RNVC: 2

21 Aug 1997

5340-15-214-3144
Fascetta Cablaggio

152143144
MIL-LK0B: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-111-8705
Dispositivodichiusu

151118705
277A6013-401: RNCC: 3 | RNVC: 2

15 Jan 1991

5340-15-194-4642
Corrosion Preventive Anode

151944642
43.188.52: RNCC: 3 | RNVC: 2
(241)A492843.188.52: RNCC: 5 | RNVC: 2

18 Nov 2010

5340-15-102-0771
Cerniera A Volonta

151020771
213A7178-401: RNCC: 3 | RNVC: 2

29 Jul 1988

5340-15-149-3033
Multiple Angle Bracket

151493033
4885376: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-180-8056
Dust And Moisture Seal Protective Cap

151808056
3AL79266AAXX: RNCC: 3 | RNVC: 2

23 Jul 2008

5340-15-061-2684
Electrical-Me Post

150612684
1200096-136200003: RNCC: 5 | RNVC: 2
000200273200: RNCC: 5 | RNVC: 2
000200273200: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-103-1966
Piastrina Bloccaggi

151031966
DE013.13.418: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-192-6495
Mamcetta

151926495
V44975: RNCC: 3 | RNVC: 2

26 Mar 2010

5340-15-149-2482
Control Rod

151492482
115980/002: RNCC: 3 | RNVC: 2

12 Nov 1999

5340-15-193-1783
Utility Resilient Mount

151931783
VZA/R/AV1000/4,5: RNCC: 3 | RNVC: 2

20 Apr 2010

5340-15-110-2798
Bracket Ele

151102798
P125385-001: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-170-8577
Lastra 506X357x1.6

151708577
58311-11/055: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-109-2870
Finestradipressuriz

151092870
BN865708: RNCC: 3 | RNVC: 2
BN865708: RNCC: 5 | RNVC: 9

30 May 1989

5340-15-166-4847
Cerniera Femmina

151664847
035413093: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-232-4672
Snodo

152324672
8114003: RNCC: 3 | RNVC: 2
534015E081783: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-074-4129
Turnbuckle

150744129
2C39UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-118-0388
Disco Forato In Acc

151180388
D0484574: RNCC: 3 | RNVC: 2

18 Nov 1994

5340-15-220-4517
Serratura Cisa

152204517
SERRATURACISA: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-112-0432
Dispositivo Di Supp

151120432
275A0312-401: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-153-0380
Speciale Fascetta

151530380
1110.050: RNCC: 3 | RNVC: 2
1110.050: RNCC: 5 | RNVC: 2
55011E001010: RNCC: 5 | RNVC: 2

15 Nov 2000

5340-15-157-2212
Headless Straight Rod

151572212
42090606: RNCC: 3 | RNVC: 2
(241)A424942090606: RNCC: 5 | RNVC: 2

27 May 2003

5340-15-213-8536
Mollaspingiporta

152138536
0914: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-213-7203
Tassello Di Plastic

152137203
TASSELLO12MM: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-175-5163
Catena Genov.Zc.Mm.

151755163
49011: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-157-4168
Manual Control Lever

151574168
990673: RNCC: 3 | RNVC: 2
(241)A3593990673: RNCC: 5 | RNVC: 2

11 Jul 2003

5340-15-104-8909
Fissaggio Gaffetta

151048909
4951136: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-122-3002
Petit Disque D Axe

151223002
591390: RNCC: 3 | RNVC: 2
591390: RNCC: 5 | RNVC: 2

25 Jun 1996

5340-15-113-8585
Corrosion Preventive Anode

151138585
1-2.3066-R: RNCC: 3 | RNVC: 2

17 Mar 1992

5340-15-120-6950
Coperchio Segnalazi

151206950
D0467044: RNCC: 3 | RNVC: 2

1 May 1996

5340-15-180-4312
Si Supporting Angle

151804312
412-1600-07-115: RNCC: 3 | RNVC: 2
(241)A0126412-1600-07-115: RNCC: 5 | RNVC: 2

20 May 2008

5340-15-045-4651
Collare

150454651
641-12-02: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-113-2077
Helical Compression Spring Seat

151132077
773836: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-001-5501
Stand Base

150015501
182719587: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-15-206-0451
Tappo Otturatore

152060451
60130600: RNCC: 3 | RNVC: 2
(241)A424960130600: RNCC: 5 | RNVC: 2

8 May 2012

5340-15-056-4361
Perno Speciale

150564361
067563: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-118-6617
Collare

151186617
73126663: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-155-8249
Multiple Angle Bracket

151558249
4111T67G01: RNCC: 3 | RNVC: 2
4111T67G01: RNCC: 3 | RNVC: 2

11 Jul 2002

5340-15-110-3786
Grooved Clamp Coupling

151103786
2221.345A: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-062-8991
Cerniera Speciale

150628991
0-56044: RNCC: 3 | RNVC: 2

11 Mar 1982

5340-15-119-0115
Resilient Mount

151190115
70121689: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-156-2136
Support

151562136
(241)A3460CBD71149P02: RNCC: 3 | RNVC: 2
CBD71149P02: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-191-5811
Bussola

151915811
3721402: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-061-4727
Supporto Angolare S

150614727
P-135233-002: RNCC: 3 | RNVC: 2
P135233-002: RNCC: 5 | RNVC: 2

26 Jan 1978

5340-15-159-4731
Padlock

151594731
PN UAS 00023227: RNCC: 3 | RNVC: 2
5340F76009459: RNCC: 5 | RNVC: 9

31 Mar 2004

5340-15-162-0694
Impressed Cur Anode

151620694
PNS0240: RNCC: 3 | RNVC: 2

28 Dec 2000

5340-15-149-8275
Gancio Fissaggio Mo

151498275
99991185: RNCC: 3 | RNVC: 2

3 Jun 1999

5340-15-198-0575
Corrosion Preventive Anode

151980575
8560040: RNCC: 3 | RNVC: 2
(241)A31218560040: RNCC: 5 | RNVC: 2

10 Jun 2004

5340-15-154-5031
Helical Compression Spring Seat

151545031
1P 548226: RNCC: 3 | RNVC: 2
1P 548226: RNCC: 5 | RNVC: 9

20 Jun 2001

5340-15-100-2569
Electronic Equipment Hardware Kit

151002569
049S: RNCC: 3 | RNVC: 2

17 Oct 1986

5340-15-054-3283
Staffetta

150543283
523454: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-159-4722
Padlock

151594722
PN UAS 00029843: RNCC: 3 | RNVC: 2
9999F76000381: RNCC: 5 | RNVC: 9

31 Mar 2004

5340-15-009-5825
Helical Compression Spring Seat

150095825
75307911: RNCC: 3 | RNVC: 2
9918871: RNCC: 5 | RNVC: 2
75307911: RNCC: 5 | RNVC: 9

22 Sep 1979

5340-15-166-5037
Bracket

151665037
UA29004A02C: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-105-8172
Sostegno Elastico

151058172
PUFFER 27796: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-068-3327
Supporto Semianello

150683327
OD136K023: RNCC: 3 | RNVC: 2

27 Oct 1985

5340-15-107-4437
Helical Compression Spring Seat

151074437
1P 532483: RNCC: 3 | RNVC: 2
1P 532483: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-107-4355
Flexible Surface Mechanical Patch

151074355
46340451: RNCC: 3 | RNVC: 2
46340451: RNCC: 5 | RNVC: 9

19 Jun 1988

5340-15-041-2818
Ammortizzatore

150412818
N86892T16862: RNCC: 3 | RNVC: 2
N86892T16862: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-122-3839
Turnbuckle

151223839
D1408730: RNCC: 3 | RNVC: 2

16 Jun 2000

5340-15-213-7196
Ruota

152137196
120X19: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-142-3676
Maniglia

151423676
MS111-0061-04: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-116-2718
Centraggio Fori

151162718
190521237: RNCC: 3 | RNVC: 2

15 Apr 1993

5340-15-118-3865
Resilient Mount

151183865
60158359: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-118-0402
Contenitore Per Ast

151180402
D0484595: RNCC: 3 | RNVC: 2

18 Nov 1994

5340-15-107-4354
Flexible Surface Mechanical Patch

151074354
46340404: RNCC: 3 | RNVC: 2
46340404: RNCC: 5 | RNVC: 9

19 Jun 1988

5340-15-153-8903
Engine Accessory Bracket

151538903
70055F91: RNCC: 3 | RNVC: 2

9 Mar 2001

5340-15-149-7331
Dust And Moisture Seal Protective Cap-Plug

151497331
4751562: RNCC: 3 | RNVC: 2

10 May 1999

5340-15-006-1824
Forcella Terminale

150061824
01TL20909: RNCC: 3 | RNVC: 2

24 Oct 1979

5340-15-153-7426
Multiple Angle Bracket

151537426
142061407: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-153-8904
Engine Accessory Bracket

151538904
70056F91: RNCC: 3 | RNVC: 2

9 Mar 2001

5340-15-118-0828
Linear Actuating Cylinder Cap

151180828
D0487999: RNCC: 3 | RNVC: 2

16 Dec 1994

5340-15-117-5377
Resilient Mount Plate

151175377
09414A113740: RNCC: 5 | RNVC: 2
09414A113740: RNCC: 5 | RNVC: 9

12 Nov 1993

5340-15-001-7919
Dust And Moisture Seal Protective Cap-Plug

150017919
504087741: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-162-3246
For Va Screw Collar

151623246
159053: RNCC: 3 | RNVC: 2

27 Jun 2001

5340-15-154-5058
Volantino

151545058
1P 544217: RNCC: 3 | RNVC: 2
1P 544217: RNCC: 5 | RNVC: 9

20 Jun 2001

5340-15-108-3510
Speciale Anello

151083510
68-403081-001: RNCC: 3 | RNVC: 2

2 May 1989

5340-15-105-6341
Collare Serraggio

151056341
708995: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-215-3472
Maniglia Cromata Pe

152153472
MANIGLIACROMATA: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-008-4863
Turnbuckle

150084863
4595849: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-149-5203
Threaded Rod End

151495203
112707577: RNCC: 3 | RNVC: 2

31 Mar 1999

5340-15-106-2031
Comando Impugnatura

151062031
3-117: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-207-8218
Headless Straight Rod

152078218
42102878: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-135-9780
Tappo

151359780
259454: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-007-3117
Lardone

150073117
01TC20322: RNCC: 3 | RNVC: 2

10 Apr 1980

5340-15-119-3157
Patte De Frein

151193157
14199510: RNCC: 3 | RNVC: 2
14199510: RNCC: 3 | RNVC: 2
14199511: RNCC: 3 | RNVC: 2

11 Jul 1994

5340-15-068-4389
Metal Runner

150684389
SH 4190-801: RNCC: 3 | RNVC: 2

9 Oct 1986

5340-15-114-0868
Assiemeelettromecca

151140868
713440-0001: RNCC: 3 | RNVC: 2

22 Apr 1992

5340-15-127-4084
Molla

151274084
1740-10-009: RNCC: 3 | RNVC: 2
1740-10-009: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-150-5905
Assieme Cornice Sin

151505905
A62375-01-10: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-15-188-1179
Handle

151881179
G2212120008-109: RNCC: 3 | RNVC: 2

14 Jul 2009

5340-15-121-6268
Nonmetallic Bumper

151216268
800028330: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-115-6010
Chiavistello

151156010
816210063: RNCC: 3 | RNVC: 2

10 Dec 1992

5340-15-118-6066
Tube

151186066
73135368: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-158-5700
Threaded End Tensioning Tie Rod

151585700
122611608: RNCC: 3 | RNVC: 2

9 Mar 2004

5340-15-057-1434
Connector Rod End S

150571434
2-3081-501-42136-1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-189-7077
Tubo

151897077
808701: RNCC: 3 | RNVC: 2

26 Feb 2010

5340-15-100-0940
Corrosion Preventive Anode

5340-15-180-5164
Sealing Plug Assembly

151805164
262601208ZT102: RNCC: 3 | RNVC: 2
(241)A9840262601208ZT102: RNCC: 5 | RNVC: 2

10 Jun 2008

5340-15-020-3261
Molla Contatto

150203261
02-093J05-25: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-168-8774
Targa Bronzo

151688774
F19007166: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-159-9620
Dust And Moisture Seal Protective Cap-Plug

151599620
122650207: RNCC: 3 | RNVC: 2

19 Apr 2004

5340-15-119-7367
Supp Flange

151197367
01TL23368: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-114-8253
Kitviteria

151148253
188-2002/01: RNCC: 3 | RNVC: 2

12 Aug 1992

5340-15-115-8688
Plate

151158688
273665P2: RNCC: 3 | RNVC: 2
71-02-023-004: RNCC: 3 | RNVC: 2

1 Feb 1993

5340-15-149-0881
Rod Re Clip-Clevis

151490881
205-8926-02-1: RNCC: 3 | RNVC: 2

26 Nov 1998

5340-15-218-7095
Punti Per Spillatri

152187095
PUNTIMM7: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-000-6732
Plate

150006732
H5200: RNCC: 3 | RNVC: 2

28 Mar 2013

5340-15-181-3777
Door Lock Disc

151813777
3LD22130TK51: RNCC: 3 | RNVC: 2
3LD22130TK51: RNCC: 3 | RNVC: 9
(241)A24763LD22130TK51: RNCC: 5 | RNVC: 2
(241)A24763LD22130TK51: RNCC: 5 | RNVC: 9

10 Dec 2008

5340-15-232-1260
Leva Distributore

152321260
10431: RNCC: 3 | RNVC: 2
534015E137490: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-166-4986
Hinge Half

151664986
216A8020001: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-156-2673
Padlock

151562673
100130057: RNCC: 3 | RNVC: 2
(241)AD751100130057: RNCC: 5 | RNVC: 2
100130057: RNCC: 5 | RNVC: 2
(241)A9772100130057: RNCC: 5 | RNVC: 2

20 Dec 2002

5340-15-122-5517
Lock Lever

151225517
01TL21287: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-121-0070
Piastrina Per Uso S

151210070
001234044: RNCC: 3 | RNVC: 2
171.04.020.01: RNCC: 5 | RNVC: 2

5 Sep 1995

5340-15-009-5816
Helical Compression Spring Seat

150095816
75466611: RNCC: 3 | RNVC: 2
9982570: RNCC: 5 | RNVC: 2
75466611: RNCC: 5 | RNVC: 9

22 Sep 1979

5340-15-175-1156
Dust And Moisture Seal Boot

151751156
2136054: RNCC: 3 | RNVC: 2
470642SAV: RNCC: 5 | RNVC: 2

29 Dec 2003

5340-15-115-6862
Piston Connecting Rod

151156862
D0488723: RNCC: 3 | RNVC: 2

7 Mar 1994

5340-15-207-8379
Multiple Angle Bracket

152078379
8510.149: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-186-9271
Manual Control Handle

151869271
37310: RNCC: 3 | RNVC: 2
91826362: RNCC: 5 | RNVC: 2

5 Jan 2009

5340-15-001-3552
Angle Bracket

150013552
A387A1320C: RNCC: 3 | RNVC: 2

20 Jun 2013

5340-15-179-7199
Multiple Angle Bracket

151797199
00184423: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-156-2065
Guide

151562065
(241)A3460CBD71154P03: RNCC: 3 | RNVC: 2
CBD71154P03: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-156-2033
Oil Basin

151562033
CBD71066P05: RNCC: 3 | RNVC: 2
(241)A3460CBD71066P05: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-115-7052
Coperchio

151157052
D0467822: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-122-0323
Projecteur

151220323
084-922: RNCC: 3 | RNVC: 2
084-922: RNCC: 5 | RNVC: 9

23 Apr 1996

5340-15-127-3038
Semimorsetto Fissag

151273038
709448: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-074-3666
Turnbuckle

150743666
1C10UNI20210T60-2012ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-105-6381
Collare Serraggio

151056381
1369237: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-194-6103
Flangia

151946103
RZ52329: RNCC: 3 | RNVC: 2

14 Dec 2010

5340-15-116-9731
Harness

151169731
W005143: RNCC: 3 | RNVC: 2
(7001)5340151169731: RNCC: 5 | RNVC: 2

18 Nov 1997

5340-15-118-0490
Blocchetto In Bronz

151180490
D0488438: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-102-8033
Control Rod

151028033
91618214: RNCC: 3 | RNVC: 2

10 Aug 1987

5340-15-154-9532
Impugnatura

151549532
77000521: RNCC: 3 | RNVC: 2

22 Nov 2001

5340-15-062-5922
Half Lh

150625922
36E02: RNCC: 3 | RNVC: 2
36E02: RNCC: 3 | RNVC: 2

10 Apr 1982

5340-15-205-9220
Dust And Moisture Seal Protective Cap-Plug

152059220
8104373: RNCC: 3 | RNVC: 2
(241)A31148104373: RNCC: 5 | RNVC: 2

17 Apr 2012

5340-15-008-3708
Double Angle Bracket

150083708
4725276: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-138-6747
Ass.Staffa

151386747
5454-322-001: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-203-8923
Helical Compression Spring Seat

152038923
SS350-191: RNCC: 3 | RNVC: 2
(241)A3539SS350-191: RNCC: 5 | RNVC: 2

18 Jul 2011

5340-15-148-9745
Az Manchet

151489745
F01A02733P01: RNCC: 3 | RNVC: 2
600-4031-078: RNCC: 5 | RNVC: 2

9 Nov 1998

5340-15-105-6052
Snap Hook

151056052
DV35/285/1617: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-074-4076
Turnbuckle

150744076
2B10UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-177-4558
Hardware Vary

151774558
045440: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-184-8000
Piombo

151848000
NSN534015R573846: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-166-5252
Kit-Strigitubo Diam

151665252
1902850: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-139-4312
Fascia Fissaggio Se

151394312
4690060: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-061-3814
Supporto Metallico

150613814
P26CA2: RNCC: 5 | RNVC: 2
P26CA2: RNCC: 5 | RNVC: 9

22 Sep 1977

5340-15-109-6813
Shock Mount Pad

151096813
70209: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-147-3131
Plate Wheel

151473131
300498: RNCC: 3 | RNVC: 2

31 Oct 1997

5340-15-122-4592
Lock Key

151224592
800046614: RNCC: 3 | RNVC: 2

30 Jul 1996

5340-15-183-4960
Piastrine Metallo

151834960
COMM631018030017: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-182-9509
Ruota Girevole Spor

151829509
MO534015C000463: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-074-4171
Turnbuckle

150744171
1A30UNI2019ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-147-3082
Bracket

151473082
302954: RNCC: 3 | RNVC: 2

31 Oct 1997

5340-15-155-9811
Resilient Mount

151559811
504044687: RNCC: 3 | RNVC: 2
5054180330: RNCC: 3 | RNVC: 2
5054180330: RNCC: 5 | RNVC: 9

28 Oct 2002

5340-15-136-2598
Cerniera

151362598
5953368: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-112-8345
Sedeo

151128345
470443: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-148-0467
Dust And Moisture Seal Protective Plug

151480467
103826: RNCC: 3 | RNVC: 2

16 Jun 1998

5340-15-148-7079
Dust And Moisture Seal Protective Cap

151487079
W030493A: RNCC: 3 | RNVC: 2

28 Sep 1998

5340-15-063-8857
Helical Compression Spring Seat

150638857
78847: RNCC: 3 | RNVC: 2

1 Apr 1998

5340-15-007-7078
Helical Compression Spring Retainer

150077078
4183406: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-112-0530
Dispositivo Di Supp

151120530
244A1183-401: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-103-4156
Bush

151034156
277281ART29: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-060-6825
Hinge

150606825
1971TAV69-24: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-108-7631
Resilient Mount

151087631
ACR100FE: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-160-7602
Lucchetto Comb.

151607602
F720151401: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-005-6649
Threaded End Tensioning Tie Rod

150056649
4162801: RNCC: 3 | RNVC: 2
4162801: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-109-8845
Anello Di Ritegno S

151098845
472085: RNCC: 3 | RNVC: 2
D0472085: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-192-5833
Portarotolo A Muro

151925833
ATPORTMUM: RNCC: 3 | RNVC: 2

26 Mar 2010

5340-15-127-3088
Molla Leva Doppia R

151273088
725838: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-119-9734
Turnbuckle Body

151199734
74809F01: RNCC: 3 | RNVC: 2
74809F01: RNCC: 5 | RNVC: 9

22 May 1996

5340-15-156-2150
Special Rod Tie

151562150
(241)A3460CBD71276P03: RNCC: 3 | RNVC: 2
CBD71276P03: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-152-8856
Speci Semicerniera

151528856
190509354: RNCC: 3 | RNVC: 2

7 Nov 2000

5340-15-064-3994
Rubber Bumper

150643994
60113418: RNCC: 3 | RNVC: 2

6 May 1983

5340-15-101-2662
Cappellotto Special

151012662
70109: RNCC: 3 | RNVC: 2

24 Jan 1986

5340-15-051-3289
Rubber Bumper

150513289
4005951: RNCC: 3 | RNVC: 2
4005951: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-163-1612
Support

151631612
98467504: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-105-9135
Headless Straight Rod

151059135
710695: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-053-1099
Extension Drawer Slide

150531099
92N052P001: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-122-5778
Helical Compression Spring Seat

151225778
6410.098: RNCC: 3 | RNVC: 2
6410.098: RNCC: 5 | RNVC: 2

10 Sep 1996

5340-15-179-4402
Helical Compression Spring Retainer

151794402
46186208: RNCC: 3 | RNVC: 2

28 Nov 2006

5340-15-103-0991
Electrical-Me Post

151030991
DE013.12.397: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-131-5882
Control Rod

151315882
748007J: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-104-4328
Testa Tira Forcella

151044328
1366344: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-112-2673
Helical Compression Spring Seat

151122673
773151: RNCC: 3 | RNVC: 2

30 Apr 1988

5340-15-178-5984
Hinge Right

151785984
541-06-1560: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-174-7610
Coppia Di Fermagli

151747610
68215-32/099: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-193-9950
Sliding Door Hanger Section

151939950
109-0360-32-106: RNCC: 3 | RNVC: 2

12 Aug 2010

5340-15-009-7125
Cover Plate Access

150097125
1236-16-115: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-148-5805
Assieme Semicernier

151485805
129-0340-42-101: RNCC: 3 | RNVC: 2

31 Aug 1998

5340-15-220-4178
Cerniera In Ferro A

152204178
MM-80: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-007-0269
Pad Rubber

150070269
P-883558-001: RNCC: 3 | RNVC: 2
P883558-001: RNCC: 5 | RNVC: 2

20 Nov 1979

5340-15-055-6670
Staffa Laterale Fis

150556670
543726: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-166-4868
Fascetta

151664868
960841: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-179-6603
Sicura Pistoncino

151796603
G0054200: RNCC: 3 | RNVC: 2
(241)A8848G0054200: RNCC: 5 | RNVC: 2

7 Jun 2007

5340-15-114-3158
Guida

151143158
CF415524: RNCC: 3 | RNVC: 2

4 Jun 1992

5340-15-153-7217
Multiple Angle Bracket

151537217
142025158: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-119-9730
Helical Compression Spring Seat

151199730
74881F01: RNCC: 3 | RNVC: 2
74881F01: RNCC: 5 | RNVC: 9

22 May 1996

5340-15-001-5955
Angle Bracket

150015955
5801353782: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-181-0590
Engine Accessory Bracket

151810590
071344: RNCC: 3 | RNVC: 2
(241)A3593071344: RNCC: 5 | RNVC: 2

10 Oct 2008

5340-15-009-3819
Listello Per Gomma

150093819
2-7-0249: RNCC: 3 | RNVC: 2

22 Jun 1981

5340-15-061-3818
Supporto Angolare

150613818
P36HB4: RNCC: 5 | RNVC: 2
P36HB4: RNCC: 5 | RNVC: 9

22 Sep 1977

5340-15-188-2801
Dust And Moisture Seal Protective Cap

151882801
SPLT.13003: RNCC: 3 | RNVC: 2
336621183051: RNCC: 5 | RNVC: 2
SPLT13003: RNCC: 5 | RNVC: 2

1 Sep 2009

5340-15-199-4903
Engine Accessory Bracket

151994903
313129F01: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-15-007-7589
Coperchio Speciale

150077589
0-20909: RNCC: 3 | RNVC: 2

23 Apr 1980

5340-15-215-5510
Moveable Peg Socket

152155510
YA450A: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-135-9638
Piastra

151359638
4093186: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-116-8598
Cilindro Fondello

151168598
D0467177: RNCC: 3 | RNVC: 2

8 Apr 1994

5340-15-144-6512
Bocchettone

151446512
P7902: RNCC: 3 | RNVC: 2
B1700: RNCC: 3 | RNVC: 2

11 Dec 1996

5340-15-188-1150
Maniglia

151881150
210706009H: RNCC: 3 | RNVC: 2
(241)A0071210706009H: RNCC: 5 | RNVC: 2

13 Jul 2009

5340-15-142-9022
Filling And Bl Plug

151429022
474247: RNCC: 3 | RNVC: 2

22 Oct 1996

5340-15-115-6937
Control Rod

151156937
D0488739: RNCC: 3 | RNVC: 2

8 Mar 1994

5340-15-139-2056
Fermo

151392056
561313: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-235-4923
Pannello So Attacco

152354923
DYA064: RNCC: 3 | RNVC: 2
534015E122652: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-054-1175
Ammortizzatore

150541175
NB02145A84: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-142-8567
Dispositivo Di Blo

151428567
10PV00006-587: RNCC: 3 | RNVC: 2
10PV00006-587: RNCC: 5 | RNVC: 9

9 Jun 1997

5340-15-104-8913
Fissaggio Gaffetta

151048913
4537675: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-061-5415
Cover Plate Access

150615415
0002004229507: RNCC: 5 | RNVC: 2
0002004229507: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-206-9025
Cono In Grafite Da

152069025
09920141: RNCC: 3 | RNVC: 2
(241)A394409920141: RNCC: 5 | RNVC: 2

25 Jul 2012

5340-15-006-9622
Clamp

150069622
4860: RNCC: 3 | RNVC: 2

11 Jan 1979

5340-15-005-3026
Escutcheon Plate

150053026
9R0455-100-24684-7: RNCC: 3 | RNVC: 2

11 Jan 1979

5340-15-203-2496
Engine Accessory Bracket

152032496
1T 615076LA: RNCC: 3 | RNVC: 2

13 Dec 2007

5340-15-063-8034
Nut And Bolt Locking Plate

150638034
586750: RNCC: 3 | RNVC: 2

31 Mar 1982

5340-15-151-2320
Threaded End Tensioning Tie Rod

151512320
00085694: RNCC: 3 | RNVC: 2

3 May 2000

5340-15-002-1713
Double Angle Bracket

150021713
5801325118: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-118-0326
Protezione Attuator

151180326
D0467493: RNCC: 3 | RNVC: 2

15 Nov 1994

5340-15-213-8855
Copripilastro Quadr

152138855
398IBFM: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-127-5292
Staffetta Fissaggio

151275292
876014: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-109-6806
Shock Mount Pad

151096806
70218: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-117-4033
Telaio Per Rele E21

151174033
D1405546: RNCC: 3 | RNVC: 2

31 Mar 1994

5340-15-112-8543
Strozzatore

151128543
471303: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-109-8972
Obturator

151098972
369874: RNCC: 3 | RNVC: 2
D0369874: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-181-8398
Piastrina Bloccaggi

151818398
8420200: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-108-7635
Resilient Mount

151087635
AL150: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-153-5160
Dust And Moisture Seal Protective Plug

151535160
142003199: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-114-7328
Aggancio

151147328
D0491244: RNCC: 3 | RNVC: 2

30 Jul 1992

5340-15-005-2600
Rubbe Bumper Strip

150052600
109-0616-71-11: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-152-1168
Tassello Gomma

151521168
60154314: RNCC: 3 | RNVC: 2

7 Aug 2000

5340-15-157-8635
Engine Accessory Bracket

151578635
1Q 612664: RNCC: 3 | RNVC: 2

19 Nov 2003

5340-15-118-0508
Piastrino In Acciai

151180508
D0488614: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-003-9080
Stand Base

150039080
182741050: RNCC: 3 | RNVC: 2
(241)A0199182741050: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-109-5760
Double Angle Bracket

151095760
20530773A: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-159-9640
Spring Loaded Cylinder Fastener

151599640
122510311: RNCC: 3 | RNVC: 2

19 Apr 2004

5340-15-108-8022
Helical Compression Spring Seat

151088022
1395487: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-178-4988
Dust And Moisture Seal Protective Cap

151784988
308192: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-007-2733
Co Mensola Speciale

150072733
1386134: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-155-4452
Central Cover Assy

151554452
CBD71290G01: RNCC: 3 | RNVC: 2

25 Mar 2002

5340-15-064-9025
Porta Targa Automob

150649025
152774: RNCC: 3 | RNVC: 2

6 Mar 1984

5340-15-008-0236
Cover Access Aircra

150080236
109-0310-66-41: RNCC: 3 | RNVC: 2

11 Nov 1981

5340-15-105-4237
Cinghia Passante

151054237
2/20328-09.03.74-05: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-149-3413
Staffa Di Fermo Cin

151493413
60152410: RNCC: 3 | RNVC: 2
142097407: RNCC: 8 | RNVC: 2

2 Feb 1999

5340-15-153-8963
Shackle

151538963
9338T7: RNCC: 3 | RNVC: 2
(241)A333400083387: RNCC: 4 | RNVC: 1
00083387: RNCC: 5 | RNVC: 2

9 Mar 2001

5340-15-181-6629
Punzoni Serie 27 Le

151816629
SERIE 27 LETTERE: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-120-6711
Control Rod

151206711
D0491474: RNCC: 3 | RNVC: 2

28 Jun 1996

5340-15-119-7375
Loc Flange

151197375
01TL23347: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-231-9440
Tirante

152319440
8967438: RNCC: 3 | RNVC: 2
534015E144810: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-089-0306
Gancio

150890306
6006838: RNCC: 3 | RNVC: 2
6006838: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-195-9094
Hinge

151959094
3842535644: RNCC: 3 | RNVC: 2
(241)A46093842535644: RNCC: 5 | RNVC: 2

25 May 2011

5340-15-107-4519
Threaded End Tensioning Tie Rod

151074519
12335124613: RNCC: 3 | RNVC: 2
12335124613: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-178-4990
Dust And Moisture Seal Protective Cap

151784990
307063: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-187-1254
Dust And Moisture Seal Protective Plug

151871254
A196A1000B: RNCC: 3 | RNVC: 2

19 Feb 2009

5340-15-000-8393
Corrosion Preventive Anode

150008393
97400000340R: RNCC: 3 | RNVC: 2

11 Apr 2013

5340-15-109-1861
Double Angle Bracket

151091861
60103676: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-111-7962
Double Angle Bracket

151117962
032193/1: RNCC: 3 | RNVC: 2

1 Jul 1990

5340-15-221-0602
Luggage Catch

152210602
749109-1: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-206-5770
Utility Resilient Mount

152065770
E1N3455-52: RNCC: 3 | RNVC: 2
(241)AJ807E1N3455-52: RNCC: 5 | RNVC: 2

26 Jun 2012

5340-15-174-7483
Piatto 60X30 Pealsi

151747483
54130-01/236: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-139-5223
Cerniera Sinistra

151395223
8459735: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-067-0384
Antivibrante

150670384
SAPIT311-11: RNCC: 2 | RNVC: 2

1 Apr 1998

5340-15-213-8238
Rullo Di Rinvio Fer

152138238
2070-FZO: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-150-3903
Dust And Moisture Seal Protective Cap

151503903
M106: RNCC: 3 | RNVC: 2

2 Dec 1999

5340-15-107-6752
Complessivo Flangia

151076752
41044-1: RNCC: 3 | RNVC: 2
41044-1: RNCC: 3 | RNVC: 2

16 Dec 1988

5340-15-001-8269
Dust And Moisture Seal Protective Cap

150018269
5949787986: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-194-4020
Lock-Release Lever

151944020
71483898: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-15-180-2190
Utility Resilient Mount

151802190
0.467.7693.0: RNCC: 3 | RNVC: 2

15 Feb 2008

5340-15-110-3966
Semimorsetto Specch

151103966
42344896: RNCC: 3 | RNVC: 2
42344896: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-061-2679
Electrical-Me Post

150612679
000200100900: RNCC: 5 | RNVC: 2
000200100900: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-122-2123
Deflecteur Radiateu

151222123
80A074147: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-104-8898
Fissaggio Gaffetta

151048898
849602: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-121-6391
Levier Pompe Carbur

151216391
800040585: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-148-7500
Assieme Sede

151487500
2103-0050-001: RNCC: 3 | RNVC: 2

30 Sep 1998

5340-15-179-6790
Vehicular Seat Bracket

151796790
0000500414216: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-148-1559
Double Angle Bracket

151481559
60184419: RNCC: 3 | RNVC: 2

25 Jun 1998

5340-15-139-7891
Headless Straight Rod

151397891
1001038: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-111-7278
Socket

151117278
F407A1A1-03: RNCC: 3 | RNVC: 2
F407A1A1-03: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-002-1582
Headless Grooved Rod

150021582
99R01015118O: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-116-0825
Threaded End Tensioning Tie Rod

151160825
316826: RNCC: 2 | RNVC: 2
1Q 316826: RNCC: 3 | RNVC: 2
1Q 316826: RNCC: 5 | RNVC: 9
316826: RNCC: 5 | RNVC: 9

22 Dec 1993

5340-15-198-3275
Corrosion Preventive Anode

151983275
DN32DC38: RNCC: 3 | RNVC: 2

22 Sep 2004

5340-15-051-4240
Collare

150514240
4571551: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-112-8580
Headless Grooved Rod

151128580
466923: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-102-8749
Dust And Moisture Seal Protective Cap

151028749
1P209940: RNCC: 3 | RNVC: 2
1P209940: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-120-0202
Double Angle Bracket

151200202
79033364: RNCC: 3 | RNVC: 2

5 Dec 1994

5340-15-148-7425
Access Cover

151487425
142032347: RNCC: 3 | RNVC: 2

28 Sep 1998

5340-15-151-7525
Cuffia Leva

151517525
A2495900: RNCC: 3 | RNVC: 2

5 Jul 2000

5340-15-064-4088
Scodellino A Tazza

150644088
16722: RNCC: 3 | RNVC: 2
F300 0T 001 1247: RNCC: 6 | RNVC: 9

2 Aug 1979

5340-15-211-8762
Coppia Di Mensole 3

152118762
NB1010: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-232-9582
Tassello Nylon Mm.1

152329582
534015E082527: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-074-4287
Turnbuckle

150744287
2A22UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-153-6650
Speci Chiavistello

151536650
142052106: RNCC: 1 | RNVC: 3

20 Feb 2001

5340-15-202-3346
Staffetta Fissaggio

152023346
17312301: RNCC: 3 | RNVC: 2
(241)A424917312301: RNCC: 5 | RNVC: 2

28 Feb 2007

5340-15-202-2317
Rod Assy

152022317
233A1003-413: RNCC: 3 | RNVC: 2
(241)A0019233A1003-413: RNCC: 5 | RNVC: 2

13 Feb 2007

5340-15-062-1354
Bracket

150621354
21816.0001: RNCC: 5 | RNVC: 2
4-21816-001C: RNCC: 5 | RNVC: 2
21816.0001: RNCC: 5 | RNVC: 9
4-21816-001C: RNCC: 5 | RNVC: 9

6 Dec 1980

5340-15-112-8390
Coperchio

151128390
466883: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-189-0161
Strap Seal

151890161
03E.FIFECH20: RNCC: 3 | RNVC: 2
(241)A031103E.FIFECH20: RNCC: 5 | RNVC: 2

15 Jan 2010

5340-15-114-4427
Nut And Bolt Locking Plate

151144427
60159577: RNCC: 3 | RNVC: 2

12 Jun 1992

5340-15-108-7170
Double Angle Bracket

151087170
60153817: RNCC: 3 | RNVC: 2

24 Feb 1989

5340-15-051-3725
Molla

150513725
9913192: RNCC: 3 | RNVC: 2
9913192: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-157-9390
Resilient Mount

151579390
FC226: RNCC: 3 | RNVC: 2

1 Dec 2003

5340-15-152-9685
Maniglia A T

151529685
48050000073/1: RNCC: 3 | RNVC: 2

9 Nov 2000

5340-15-127-4840
Anello Isolante Pas

151274840
854232: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-193-3792
Vehicular Seat Bracket

151933792
504246141: RNCC: 3 | RNVC: 2
(241)A4249504246141: RNCC: 5 | RNVC: 2

11 May 2010

5340-15-065-0667
Dust And Moisture Seal Protective Cap-Plug

150650667
60116093: RNCC: 3 | RNVC: 2

6 May 1983

5340-15-204-8917
Turnbuckle

152048917
ASHF10: RNCC: 3 | RNVC: 2
(241)A1644ASHF10: RNCC: 5 | RNVC: 2

24 Jan 2012

5340-15-061-2072
Double Angle Bracket

150612072
000200113200: RNCC: 5 | RNVC: 2
000200113200: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-006-2724
Piastra Speciale

150062724
0-25476: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-179-0023
Cover Plate

151790023
RS 412 115 A: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-139-7205
Staffa Bloccaggio C

151397205
A.2814600: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-118-3054
Threaded End Tensioning Tie Rod

151183054
142512109: RNCC: 3 | RNVC: 2

11 May 1994

5340-15-149-1147
Double Angle Bracket

151491147
60185077: RNCC: 3 | RNVC: 2

2 Dec 1998

5340-15-159-4730
Padlock

151594730
PN UAS 00000218: RNCC: 3 | RNVC: 2
5340F76013144: RNCC: 5 | RNVC: 9

31 Mar 2004

5340-15-121-6339
Selecteur Dentee

151216339
800036794: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-101-2556
Compl Asse Puleggia

151012556
11166: RNCC: 3 | RNVC: 2

3 Feb 1994

5340-15-109-5881
Supportoaccessoriom

151095881
20530583A: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-162-9921
Engi Shock Absorber

151629921
08016784: RNCC: 3 | RNVC: 2

9 Apr 2002

5340-15-064-9216
Nut And Bolt Locking Plate

150649216
14006: RNCC: 3 | RNVC: 2

5 May 1984

5340-15-187-5443
Spacing Threaded Standoff

151875443
E5351.0000: RNCC: 3 | RNVC: 2

9 Apr 2009

5340-15-154-5032
Helical Compression Spring Seat

151545032
1P 548227: RNCC: 3 | RNVC: 2
1P 548227: RNCC: 5 | RNVC: 9

20 Jun 2001

5340-15-108-3133
Dust And Moisture Seal Protective Plug

151083133
60111075: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-189-5551
Ammortizzatore

151895551
VR124-5: RNCC: 3 | RNVC: 2

26 Feb 2010

5340-15-112-8076
Control Rod

151128076
471349: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-153-7663
Base (1) Per Sosteg

151537663
01800A137050: RNCC: 5 | RNVC: 2
01800A137050: RNCC: 5 | RNVC: 9

27 Feb 2001

5340-15-118-8321
Helical Compression Spring Seat

151188321
9449014: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-198-5506
Aiv Fwd Bracket

151985506
4113T74G01: RNCC: 3 | RNVC: 2
(241)A34604113T74G01: RNCC: 5 | RNVC: 2

13 Oct 2004

5340-15-117-4632
Nonrotating Shaft Eye Bracket

151174632
1Q 262571: RNCC: 3 | RNVC: 2
1Q 262571: RNCC: 5 | RNVC: 9

7 Jun 1994

5340-15-060-8260
Helical Compression Spring Retainer

150608260
H81B3: RNCC: 5 | RNVC: 2
H81B3: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-005-1959
Headless Straight Rod

150051959
1376156: RNCC: 3 | RNVC: 2
1376156: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-180-4875
Angle Bracket

151804875
1Q 613938: RNCC: 3 | RNVC: 2

3 Jun 2008

5340-15-170-5580
Helical Compression Spring Retainer

151705580
A9-11425-02: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-15-230-8294
Fermaglo

152308294
872 C10: RNCC: 3 | RNVC: 2
534015E136954: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-115-6930
Steering Wheel

151156930
D1401597: RNCC: 3 | RNVC: 2

8 Mar 1994

5340-15-055-7730
Access Cover Plate

150557730
50040853: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-108-9093
Supportorigido

151089093
03958-107A1: RNCC: 3 | RNVC: 2

6 Sep 1989

5340-15-200-9108
Resilient Mount

152009108
AVAUD909L/E INOX: RNCC: 3 | RNVC: 2

2 Apr 2006

5340-15-066-1801
Plug Protec

150661801
32NN2001-7: RNCC: 3 | RNVC: 2
32NN2001-7: RNCC: 5 | RNVC: 2
32NN2001-7: RNCC: 5 | RNVC: 9
32NN2001-7: RNCC: 5 | RNVC: 9

10 Feb 1986

5340-15-205-7084
Attacco Molle A Gas

152057084
5387.PM.01.0365: RNCC: 3 | RNVC: 2
(241)A53875387.PM.01.0365: RNCC: 5 | RNVC: 2

28 Mar 2012

5340-15-151-6908
Cappellotto

151516908
0-179872: RNCC: 3 | RNVC: 2

30 Jun 2000

5340-15-122-4893
Bracket

151224893
01TL21860: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-001-5503
Stand Base

150015503
182719590: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-15-166-5054
Bracket

151665054
44886001: RNCC: 3 | RNVC: 2
44886001: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-220-3537
Lucchetto Antiscass

152203537
4116: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-051-9851
Resilient Mount

150519851
7723814: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-174-7427
Allumina Vco

151747427
345-0094/01.01: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-005-6982
Cappuccio Speciale

150056982
0-33844: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-139-7983
Catenella Completa

151397983
1001712: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-020-4138
Passante Ottone

150204138
C92X01-5: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-062-8666
Anello Speciale

150628666
0-30667: RNCC: 3 | RNVC: 2

9 Feb 1982

5340-15-237-7075
Cerniere A 3 Ali

152377075
00000060: RNCC: 3 | RNVC: 2
534015E078060: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-137-2891
Antivibrante

151372891
869595-6: RNCC: 3 | RNVC: 2
869595-6: RNCC: 5 | RNVC: 9
869595-6: RNCC: 5 | RNVC: 9

9 Oct 1996

5340-15-205-5934
Dust And Moisture Seal Protective Plug

152055934
504290879: RNCC: 3 | RNVC: 2
(241)A4249504290879: RNCC: 5 | RNVC: 2

21 Mar 2012

5340-15-203-2495
Engine Accessory Bracket

152032495
1T 615075LA: RNCC: 3 | RNVC: 2

13 Dec 2007

5340-15-074-3669
Turnbuckle

150743669
2C10UNI2021AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-221-6980
Piombo Sagomato

152216980
5340RN0601889: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-218-4516
Fischer Con Vite

152184516
SCV8: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-139-2386
Tirante

151392386
8282085: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-077-4934
Rubber Bumper

150774934
K113SD064A: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-159-9728
Rubber Bumper

151599728
122603500: RNCC: 3 | RNVC: 2

19 Apr 2004

5340-15-148-4161
Electromagnetic Lock

151484161
DG 86-BF: RNCC: 3 | RNVC: 2

11 Aug 1998

5340-15-068-1835
Boccola Speciale

150681835
474168: RNCC: 3 | RNVC: 2
D0474168: RNCC: 3 | RNVC: 2

2 Feb 1996

5340-15-186-3222
Placca In Alluminio

151863222
ALLUMINIO-NERA: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-205-7779
Assieme Contatto

152057779
182724054: RNCC: 3 | RNVC: 2
(241)A0199182724054: RNCC: 5 | RNVC: 2

3 Apr 2012

5340-15-005-4501
Cover Plate Access

150054501
1137-16-213: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-150-8555
Shock Mount Pad

151508555
00011279: RNCC: 3 | RNVC: 2

1 Feb 2000

5340-15-074-4213
Turnbuckle

150744213
1C10UNI2019A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-109-4704
Helical Compression Spring Seat

151094704
1Z 589438: RNCC: 3 | RNVC: 2
1Z 589438: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-002-7183
Molla

150027183
1745: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-127-3665
Piastrina Fissag. L

151273665
1413-26-042: RNCC: 3 | RNVC: 2
1413-26-042: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-121-0924
Corrosion Preventive Anode

151210924
8162/2: RNCC: 3 | RNVC: 2
2C-A/T/12/C/0: RNCC: 3 | RNVC: 2

22 Jan 1996

5340-15-231-6216
Piastra

152316216
0-43777: RNCC: 3 | RNVC: 2
534015E094350: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-215-3888
Cilindro Mm.70 30-3

152153888
CILINDRO70MM.: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-007-3733
Maniglia Speciale

150073733
0-33961: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-119-7563
Handle

151197563
277917-P1: RNCC: 3 | RNVC: 2
277917-P1: RNCC: 5 | RNVC: 2
277917-P1: RNCC: 5 | RNVC: 9

17 Nov 1994

5340-15-155-4854
Assem Retainer Assy

151554854
CBD71186G01: RNCC: 3 | RNVC: 2

27 Mar 2002

5340-15-117-2616
Electrical-Me Post

151172616
142502116: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-15-007-2400
Nut And Bolt Locking Plate

150072400
1398422: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-120-2477
Dust And Moisture Seal Protective Cap-Plug

151202477
29080139: RNCC: 3 | RNVC: 2
29080139: RNCC: 5 | RNVC: 2
93192842: RNCC: 5 | RNVC: 2

6 Mar 1995

5340-15-109-1858
Double Angle Bracket

151091858
1396229: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-101-7834
Fascetta Speciale

151017834
SC32674.78D: RNCC: 3 | RNVC: 2

21 Jul 1987

5340-15-062-5457
Mensola Speciale Co

150625457
1385922: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-153-0934
Assieme Disco

151530934
24045GR80: RNCC: 3 | RNVC: 2
24045GR80: RNCC: 5 | RNVC: 9

21 Nov 2000

5340-15-107-5172
Control Rod

151075172
8835590: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-102-8908
Accesso Coperchio

151028908
1R527243L: RNCC: 3 | RNVC: 2
1R527243LA: RNCC: 3 | RNVC: 2
1R527243L: RNCC: 5 | RNVC: 9
1R527243LA: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-153-6890
Sostegno Elastico

151536890
142068903: RNCC: 3 | RNVC: 2

20 Feb 2001

5340-15-179-0488
Front Cover

151790488
20132132B: RNCC: 3 | RNVC: 2

20 Apr 2006

5340-15-074-4087
Turnbuckle

150744087
2B52UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-007-9601
Resilient Mount

150079601
4431925: RNCC: 3 | RNVC: 2
4431925: RNCC: 5 | RNVC: 9

22 Sep 1979

5340-15-166-4890
Gancio Piegato In A

151664890
558000: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-108-8026
Helical Compression Spring Seat

151088026
60103610: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-005-2766
Double Angle Bracket

150052766
0-33868: RNCC: 3 | RNVC: 2

7 Sep 1978

5340-15-195-2080
Dust And Moisture Seal Protective Cap

151952080
147952-1: RNCC: 3 | RNVC: 2

7 Mar 2011

5340-15-162-2110
Electronic Equipment Hardware Kit

151622110
3AL34327AB**: RNCC: 3 | RNVC: 2

17 May 2001

5340-15-138-2892
Padlock

151382892
304: RNCC: 3 | RNVC: 2
VIRO 304: RNCC: 5 | RNVC: 2

10 Oct 1996

5340-15-114-0865
Piastra

151140865
713422-0004: RNCC: 3 | RNVC: 2

22 Apr 1992

5340-15-006-7214
Helical Compression Spring Retainer

150067214
P884038-00: RNCC: 3 | RNVC: 2

4 Jun 1989

5340-15-007-2026
Turnbuckle

150072026
1390042: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-111-5673
Rod

151115673
01TC20816: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-003-1443
Double Angle Bracket

150031443
5949790894: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-101-6287
Nut And Bolt Locking Plate

151016287
1PDH021: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-177-3786
Manual Control Lever

151773786
030353: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-187-3571
Access Door Locking Ring

151873571
040680: RNCC: 3 | RNVC: 2
(241)A3593040680: RNCC: 5 | RNVC: 2

18 Mar 2009

5340-15-007-2661
C Mensola Speciale

150072661
1381613: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-007-3780
Fascetta Speciale

150073780
0-35437: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-126-7436
Handwheel

151267436
2612-2: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-213-8765
Serratura Da Applic

152138765
402-60-3: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-008-1424
Double Angle Bracket

150081424
0-34117: RNCC: 3 | RNVC: 2

9 Jun 1981

5340-15-125-5534
Terminale A Tubo

151255534
1605030: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-112-8382
Headless Grooved Rod

151128382
466808: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-180-2177
Utility Resilient Mount

151802177
0000504204638: RNCC: 3 | RNVC: 2
504204638: RNCC: 3 | RNVC: 2

15 Feb 2008

5340-15-002-5405
Manual Control Handle

150025405
5801328565: RNCC: 3 | RNVC: 2

3 Sep 2013

5340-15-170-8084
Coperchio Sintetizz

151708084
340-0614/02: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-062-0850
Hinge

150620850
P884031-003: RNCC: 3 | RNVC: 2

27 Oct 1980

5340-15-103-0742
Dust And Moisture Seal Protective Plug

151030742
DE013.13.486: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-103-1532
Raccordo Speciale

151031532
L7330181: RNCC: 3 | RNVC: 2
DE160.03.292: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-148-6642
Access Cover

151486642
190540149: RNCC: 3 | RNVC: 2

17 Sep 1998

5340-15-159-9739
Rubber Bumper

151599739
122607457: RNCC: 3 | RNVC: 2

19 Apr 2004

5340-15-103-3479
Handwheel

151033479
R98622: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-137-1198
Molla

151371198
151608: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-115-2321
Lower Foot

151152321
518023240: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-216-8372
Staffa A Bandiera P

152168372
SLIM450: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-002-1497
Angle Bracket

150021497
5801336973: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-103-6514
Double Angle Bracket

151036514
24009010A: RNCC: 3 | RNVC: 2

26 Nov 1987

5340-15-157-4236
Nut And Bolt Retainer

151574236
21505707: RNCC: 3 | RNVC: 2

14 Jul 2003

5340-15-002-1695
Angle Bracket

150021695
5801355582: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-105-6313
Collare Serraggio

151056313
9380: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-177-4894
Sliding Shoe

151774894
D1421369: RNCC: 3 | RNVC: 2
(241)A0461D1421369: RNCC: 5 | RNVC: 2

27 Aug 2004

5340-15-235-6433
Kit Ganci Per Fasce

152356433
3506: RNCC: 3 | RNVC: 2
534015E077184: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-122-2537
Banjo Pompe A Huile

151222537
800019069: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-179-5050
Mechanic Equipment Hardware Kit

151795050
2.050.005: RNCC: 3 | RNVC: 2

23 Jan 2007

5340-15-139-7977
Catenella Completa

151397977
1001704: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-108-9095
Supportorigido

151089095
03958-105A1: RNCC: 3 | RNVC: 2

6 Sep 1989

5340-15-170-1078
Lucchetto Sar

151701078
F76012739: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-119-8237
Plug

151198237
1.192.344: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-148-3530
Double Angle Bracket

151483530
108015: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-116-4227
Manual Control Lever

151164227
GN6337.3-20 M8.N: RNCC: 3 | RNVC: 2
180508131: RNCC: 5 | RNVC: 2

18 May 1993

5340-15-215-0081
Regolatore Serranda

152150081
3007499: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-100-1657
Cerniera A Volonta

151001657
39A1215-71: RNCC: 3 | RNVC: 2

6 Dec 1986

5340-15-151-4647
Threaded End Tensioning Tie Rod

151514647
NAMS0190300: RNCC: 3 | RNVC: 2

29 May 2000

5340-15-063-4872
Helical Compression Spring Seat

150634872
4675984: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-009-4481
Sliding Stay

150094481
000202239500: RNCC: 5 | RNVC: 2
000202239500: RNCC: 5 | RNVC: 9

19 Jun 1980

5340-15-219-8353
Kit Ricambi Di Minu

152198353
AMV002: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-134-2888
Tassello

151342888
4198280: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-205-5106
Special Protezione

152055106
178940164: RNCC: 3 | RNVC: 2
(241)A0199178940164: RNCC: 5 | RNVC: 2

15 Mar 2012

5340-15-155-9360
Resilient Mount

151559360
60192607: RNCC: 3 | RNVC: 2

7 Oct 2002

5340-15-135-9857
Ammortizzatore

151359857
736-8049: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-206-5461
Corrosion Preventive Anode

152065461
04.20193.399: RNCC: 3 | RNVC: 2
(241)A496304.20193.399: RNCC: 5 | RNVC: 2

25 Jun 2012

5340-15-127-3027
Staffa

151273027
705714: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-050-3130
Resilient Mount

150503130
U412: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-153-9211
Speciale Fermo

151539211
121107148: RNCC: 2 | RNVC: 3

12 Mar 2001

5340-15-178-2232
Utility Resilient Mount

151782232
063-18: RNCC: 3 | RNVC: 2

11 Mar 2005

5340-15-195-4272
Double Angle Bracket

151954272
1Q 276160: RNCC: 3 | RNVC: 2
(241)A98401Q276160: RNCC: 5 | RNVC: 2

23 Mar 2011

5340-15-061-3806
Supporto Di Montagg

150613806
P36HA40: RNCC: 5 | RNVC: 2
P36HA40: RNCC: 5 | RNVC: 9

22 Sep 1977

5340-15-169-2872
Lucchetto C.

151692872
F72010246: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-148-1661
Forcella Testa Di T

151481661
1CPB3042Y: RNCC: 3 | RNVC: 2

1 Jul 1998

5340-15-186-3011
Doppia Maniglia "Ho

151863011
01540180: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-121-0938
Sealing Plug Assembly

151210938
160736: RNCC: 3 | RNVC: 2

22 Jan 1996

5340-15-148-7440
Threaded Rod End

151487440
180532145: RNCC: 3 | RNVC: 2

28 Sep 1998

5340-15-147-3077
Buffer Supp

151473077
781083: RNCC: 3 | RNVC: 2
60156222: RNCC: 5 | RNVC: 2

31 Oct 1997

5340-15-051-2804
Nut And Bolt Retainer

150512804
861097: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-103-0741
Dust And Moisture Seal Protective Plug

151030741
DE160.02.174: RNCC: 3 | RNVC: 2
(241)A5015DE160.02.174: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-203-7223
Dust And Moisture Seal Protective Cap

152037223
00151R0240: RNCC: 3 | RNVC: 2
00151R0240: RNCC: 5 | RNVC: 2
CV173753: RNCC: 5 | RNVC: 2

27 Jun 2011

5340-15-001-3361
Utility Resilient Mount

150013361
504380891: RNCC: 3 | RNVC: 2

17 Jun 2013

5340-15-058-4696
Resilient Mount

150584696
99A487-594: RNCC: 3 | RNVC: 2

2 Jul 1976

5340-15-155-0898
Nut And Bo Retainer

151550898
J57150308-003: RNCC: 3 | RNVC: 2

17 Jan 2002

5340-15-114-9938
Blocchetto Di Arres

151149938
39A1270-12: RNCC: 3 | RNVC: 2

20 Oct 1992

5340-15-101-7986
Fis Gaffetta Compl.

151017986
A6107-99014-3: RNCC: 3 | RNVC: 2

5 Oct 1987

5340-15-180-5952
Disco In Teflon

151805952
122607647: RNCC: 3 | RNVC: 2

24 Jun 2008

5340-15-109-5338
Nut And Bolt Locking Plate

151095338
DOR0113392: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-127-5282
Anello Elast.Sup.Po

151275282
874492: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-157-7257
Turnbuckle

151577257
TENDITORE INOX CRNI UN16900 10MM: RNCC: 3 | RNVC: 2

16 Oct 2003

5340-15-112-8356
Calottas

151128356
470947: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-203-5558
Piastra Di Montaggi

152035558
504368848: RNCC: 3 | RNVC: 2
(241)A4249504368848: RNCC: 5 | RNVC: 2

8 Jun 2011

5340-15-107-9847
Bush

151079847
141-1334/12: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-008-3449
Handle Pull Out

150083449
4-26827-001C: RNCC: 5 | RNVC: 2
4-26827-001C: RNCC: 5 | RNVC: 9

28 Sep 1981

5340-15-153-7081
Headless Straight Rod

151537081
142016197: RNCC: 1 | RNVC: 2

22 Feb 2001

5340-15-199-4994
Nut And Bolt Locking Plate

151994994
74642F01: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-15-119-2365
Dust And Moisture Seal Protective Cap

151192365
151-24: RNCC: 3 | RNVC: 2
151-24: RNCC: 5 | RNVC: 9

4 Jul 1994

5340-15-063-3156
Double Angle Bracket

150633156
60113252: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-170-4164
Dust And Moisture Seal Protective Cap

151704164
EG67769: RNCC: 3 | RNVC: 2

16 Jan 2003

5340-15-194-3971
Flange

151943971
161030180: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-15-194-0912
Threaded End Tensioning Tie Rod

151940912
555524118000: RNCC: 3 | RNVC: 2
(241)A1140555524118000: RNCC: 5 | RNVC: 2

30 Aug 2010

5340-15-107-4348
Rigid Surface Mechanical Patch

151074348
42020008: RNCC: 3 | RNVC: 2
42020008: RNCC: 5 | RNVC: 9

1 Apr 1998

5340-15-130-6044
Molla

151306044
82197432: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-115-7108
Maschera Per Dicitu

151157108
D1401060: RNCC: 3 | RNVC: 2

14 Mar 1994

Load More Results