What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 42 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 42 of 72

5340-15-204-6699
Angle Bracket

152046699
A387A1191N: RNCC: 3 | RNVC: 2
(241)A0126A387A1191N: RNCC: 5 | RNVC: 2

7 Dec 2011

5340-15-156-2055
Flange

151562055
CBD71203P01: RNCC: 3 | RNVC: 2
(241)A3460CBD71203P01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-198-8084
Piastra Di Montaggi

151988084
504050255: RNCC: 3 | RNVC: 2

17 Nov 2004

5340-15-114-7345
Cuneo Di Blocco

151147345
D0290766: RNCC: 3 | RNVC: 2

30 Jul 1992

5340-15-118-0334
Flangia Portaboccol

151180334
D0467928: RNCC: 3 | RNVC: 2

15 Nov 1994

5340-15-115-6987
Fondello Inferiore

151156987
D0473180: RNCC: 3 | RNVC: 2

10 Mar 1994

5340-15-115-7188
Coperchio

151157188
MC403.35E: RNCC: 3 | RNVC: 2

10 Dec 1993

5340-15-001-5530
Resilient Mount Plate

150015530
182708579: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-15-105-8500
Double Angle Bracket

151058500
841194: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-120-3493
Double Angle Bracket

151203493
60176581: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-109-2560
Snap Hook

151092560
9.6.77-0.0.0: RNCC: 3 | RNVC: 2

31 Jan 1990

5340-15-150-1530
Chiusura A Camma

151501530
SSI 01155: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-118-2027
Turnbuckle

151182027
17720114: RNCC: 3 | RNVC: 2

22 Apr 1994

5340-15-051-4278
Staffa

150514278
4521078: RNCC: 3 | RNVC: 2
4521078: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-157-9825
Hinge Half

151579825
J94345362-002: RNCC: 3 | RNVC: 2

14 Dec 2003

5340-15-007-3320
Access Cover Plate

150073320
1376-31-170: RNCC: 3 | RNVC: 2
137631170: RNCC: 5 | RNVC: 2

27 Oct 1979

5340-15-061-8916
Electronic Equipment Hardware Kit

150618916
XXI-149: RNCC: 3 | RNVC: 2

5 May 1984

5340-15-196-9911
Padlock

151969911
PN UAS 00037678: RNCC: 3 | RNVC: 2
5340F76032251: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-001-5956
Spring Tension Clip

150015956
42566742: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-163-2436
Plug

151632436
4817522: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-111-3832
Cernierasagomataspe

151113832
117A2110-402: RNCC: 3 | RNVC: 2

7 Sep 1990

5340-15-127-6369
Staffetta Fissaggio

151276369
715754: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-199-4871
Engine Accessory Bracket

151994871
1Z 599134: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-15-219-8095
Sagola Antimanomiss

152198095
SAGOLETTA: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-115-7128
Flangia Tubo Misura

151157128
D1401094: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-15-117-2013
Slitta Complessivo

151172013
190523116: RNCC: 3 | RNVC: 2

2 Sep 1993

5340-15-192-5039
Staffa Porta Tv Lcd

151925039
23083: RNCC: 3 | RNVC: 2
(241)A623123083: RNCC: 5 | RNVC: 2

22 Mar 2010

5340-15-136-9097
Clamp

151369097
71910: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-220-2097
Lama Seghetto Confe

152202097
1-15-559: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-204-2915
Anelli A Spirale (C

152042915
AGK104S: RNCC: 3 | RNVC: 2
(241)AE421AGK104S: RNCC: 5 | RNVC: 2

18 Oct 2011

5340-15-203-5557
Piastra Di Montaggi

152035557
504368844: RNCC: 3 | RNVC: 2
(241)A4249504368844: RNCC: 5 | RNVC: 2

8 Jun 2011

5340-15-003-4650
Stand Base

150034650
182707199: RNCC: 3 | RNVC: 2
(241)A0199182707199: RNCC: 5 | RNVC: 2

14 Nov 2013

5340-15-108-7138
Tirante Filettato

151087138
60109798: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-158-5803
Speciale Copertura

151585803
122644306: RNCC: 3 | RNVC: 2

9 Mar 2004

5340-15-120-1649
Installation Kit

151201649
198-2003/01: RNCC: 3 | RNVC: 2

17 Jan 1995

5340-15-156-3849
Plugging Plate

151563849
(241)A3460CBD71342P05: RNCC: 3 | RNVC: 2
CBD71342P05: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-172-0575
Lucchetto Corbin Mo

151720575
LUCCHETTO CORBIN MOD.EUROMARINE: RNCC: 1 | RNVC: 2

1 Jun 2003

5340-15-105-8496
Double Angle Bracket

151058496
4971561: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-115-2841
Pin

151152841
518042270: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-158-5237
Control Rod

151585237
263A1878-411: RNCC: 3 | RNVC: 2

1 Mar 2004

5340-15-157-4188
Dashpot

151574188
21505650: RNCC: 3 | RNVC: 2

14 Jul 2003

5340-15-112-8525
Coperchioi

151128525
487156: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-125-5533
Terminale A Tubo

151255533
1605010: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-153-2633
Threaded End Tensioning Tie Rod

151532633
122611264: RNCC: 2 | RNVC: 3

12 Dec 2000

5340-15-117-7032
Nut And Bolt Locking Plate

151177032
1P 283128: RNCC: 3 | RNVC: 2
1P 283128: RNCC: 5 | RNVC: 9

20 Jun 1994

5340-15-008-1813
Double Angle Bracket

150081813
60114297: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-005-5336
Anchor Strap

150055336
1026-01-196: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-117-8209
Clip Assy

151178209
109-0516-84-101: RNCC: 3 | RNVC: 2

28 Jan 1994

5340-15-115-3033
Supporting Pipe

151153033
23.12.86.00: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-178-9949
Cover Assembly

151789949
RS 404 858 AX: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-175-9241
Serratura Portellon

151759241
SERRATURACOMPLETA: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-106-9422
Maniglia Fermasport

151069422
2-200-22: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-006-1834
Perno A Bloccaggio

150061834
01TL20223: RNCC: 3 | RNVC: 2

24 Oct 1979

5340-15-170-8359
Rh Rear Side Handle

151708359
341-4589/03.01: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-157-2093
Plate

151572093
377A1366-001: RNCC: 3 | RNVC: 2

21 May 2003

5340-15-001-3170
Duplex Hitch Bar

150013170
75.FB2400-57: RNCC: 3 | RNVC: 2

17 Jun 2013

5340-15-201-8183
Manual Control Handle

152018183
50187: RNCC: 3 | RNVC: 2
(241)A348850187: RNCC: 5 | RNVC: 2

17 Dec 2006

5340-15-115-2847
Barre Upper Support

151152847
518042360: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-127-3890
Anello Elastico Sos

151273890
839306: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-183-1525
Coppa Ruota

151831525
46755727: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-156-6117
Paracolpo In Gomma

151566117
B95/MC: RNCC: 3 | RNVC: 2

3 Mar 2003

5340-15-061-8112
Fascia Speciale

150618112
0-28486: RNCC: 3 | RNVC: 2

26 Nov 1982

5340-15-125-3469
Tassello Elastico

151253469
7683363: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-007-8129
Supporto Speciale

150078129
978708: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-062-8514
Fibbia Ad Ardiglion

150628514
413020220: RNCC: 3 | RNVC: 2
413020220: RNCC: 3 | RNVC: 2

27 Oct 1982

5340-15-206-8869
Helmet Mount

152068869
A325668: RNCC: 3 | RNVC: 2
(241)AD091A325668: RNCC: 5 | RNVC: 2

24 Jul 2012

5340-15-058-6748
Cerniera

150586748
1971-69-4: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-116-1074
Manual Control Lever

151161074
DPR29494/1-27-111: RNCC: 3 | RNVC: 2

11 Oct 1993

5340-15-151-5402
Piastra

151515402
0-119151: RNCC: 3 | RNVC: 2
(241)A39630-119151: RNCC: 5 | RNVC: 2

6 Jun 2000

5340-15-053-4859
Fascetta Completa

150534859
204-4352-10-1: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-149-5266
Rod End Clevis

151495266
112730416: RNCC: 3 | RNVC: 2

31 Jan 2000

5340-15-116-8563
Accumulat Supporto

151168563
D1402558: RNCC: 3 | RNVC: 2

8 Apr 1994

5340-15-100-3967
Destra Spe Cerniera

151003967
3522 290 08660: RNCC: 3 | RNVC: 2

27 Oct 1986

5340-15-218-2528
Cerniera Quadra 30M

152182528
121-30MM: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-188-0850
Chiavistello Boccol

151880850
157611032: RNCC: 3 | RNVC: 2
(241)A0199157611032: RNCC: 5 | RNVC: 2

2 Jul 2009

5340-15-166-4752
Fascetta

151664752
AAF6501: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-009-4607
Articoli Vari

150094607
NP17TIP0N: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-162-0437
Liquid Holding Unit Filler Neck

151620437
TRV-2-035: RNCC: 3 | RNVC: 2

15 Nov 2000

5340-15-155-4454
Front Ac Cover Assy

151554454
CBD71288G01: RNCC: 3 | RNVC: 2

25 Mar 2002

5340-15-107-5725
Piastrina Completa

151075725
DE013.14.356: RNCC: 3 | RNVC: 2

5 Jan 1989

5340-15-159-9726
Rubber Bumper

151599726
122505319: RNCC: 3 | RNVC: 2

19 Apr 2004

5340-15-163-3771
Turnbuckle

151633771
9436640: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-005-6512
Anello Speciale

150056512
0-28592: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-005-6511
Leva Speciale

150056511
0-28591: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-121-7353
Clamp

151217353
1576-18-285: RNCC: 3 | RNVC: 2

6 Jul 2000

5340-15-115-5438
Carter Protezione

151155438
D0472003: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-115-5445
Piastra Per Vite

151155445
D0469252: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-139-7984
Catenella Completa

151397984
1001713: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-139-7903
Chiavistello

151397903
1001107: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-112-8457
Busta

151128457
467379: RNCC: 3 | RNVC: 2
D0467379: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-001-7224
Reducing Ring

150017224
01-07-116-4/B-D2: RNCC: 3 | RNVC: 2

15 Jul 2013

5340-15-064-9421
Targa

150649421
100.422/E: RNCC: 3 | RNVC: 2

28 Aug 1979

5340-15-215-3890
Cilindro Mm.80 30-4

152153890
CILINDRO80: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-115-3451
Safety Plate

151153451
904-6330-062: RNCC: 3 | RNVC: 2
82-01630: RNCC: 5 | RNVC: 2

29 Nov 1992

5340-15-101-6851
Handle Assy

151016851
TED-RM1: RNCC: 3 | RNVC: 2
TED-RM1: RNCC: 5 | RNVC: 9

19 Jul 1988

5340-15-173-6438
Engine Accessory Bracket

151736438
G92007: RNCC: 3 | RNVC: 2

23 Jun 2003

5340-15-163-0906
Resilient Mount

151630906
MM200: RNCC: 3 | RNVC: 2
(241)A3290MM200: RNCC: 5 | RNVC: 2

21 Jun 2002

5340-15-121-9907
Resilient Mount

151219907
60152042: RNCC: 3 | RNVC: 2

4 Apr 1996

5340-15-066-7589
Tampone

150667589
471046: RNCC: 2 | RNVC: 2
D0471046: RNCC: 3 | RNVC: 2

1 Apr 1998

5340-15-212-1042
Tappo

152121042
718618614: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-163-1231
Support

151631231
1310343080: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-113-8662
Control Rod

151138662
1Z 590196: RNCC: 3 | RNVC: 2
1Z 590196: RNCC: 5 | RNVC: 9

21 Mar 1996

5340-15-109-6322
Handwheel

151096322
0016310005: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-160-9094
Lucchetto S&G

151609094
F720176851: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-005-6883
Staffetta Speciale

150056883
0-33855: RNCC: 3 | RNVC: 2

12 Aug 1979

5340-15-074-4290
Turnbuckle

150744290
2A33UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-190-8771
Cricchetto In Otton

151908771
86 30044: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-105-5959
Staffa A Gomito

151055959
D6478/1: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-006-2726
Piastra Speciale

150062726
0-15936: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-118-0094
Control Rod

151180094
1Q 548205: RNCC: 3 | RNVC: 2
1Q 548205: RNCC: 5 | RNVC: 9

28 Jan 1995

5340-15-116-8511
Attacco Leva Per Po

151168511
D0469507: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-15-176-0269
Tassello In Acciaio

151760269
15356-16: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-074-4086
Turnbuckle

150744086
2B45UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-147-8772
Kit Axe Ressort

151478772
49231: RNCC: 3 | RNVC: 2

18 May 1998

5340-15-166-4797
Tappo Irf

151664797
009269196: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-003-3468
Manual Control Lever

150033468
182724336: RNCC: 3 | RNVC: 2
(241)A0199182724336: RNCC: 5 | RNVC: 2

4 Nov 2013

5340-15-179-8046
Frame

151798046
06.05.2029: RNCC: 3 | RNVC: 2

3 Aug 2007

5340-15-156-0970
Grooved Clamp Coupling

151560970
A092A0900: RNCC: 3 | RNVC: 2

21 Nov 2002

5340-15-115-8471
Tapped Bloc

151158471
277078P1: RNCC: 3 | RNVC: 2
71-01-001-095: RNCC: 3 | RNVC: 2

1 Feb 1993

5340-15-009-9808
Cover Plate Access

150099808
1236-06-110: RNCC: 3 | RNVC: 2

2 Sep 1980

5340-15-061-2512
Piastrina Speciale

150612512
67591-101: RNCC: 3 | RNVC: 2

31 Aug 1977

5340-15-180-4945
Staffa Per Tubazion

151804945
D9104037P: RNCC: 3 | RNVC: 2

3 Jun 2008

5340-15-178-7781
Dust And Moisture Seal Protective Plug

151787781
038651: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-166-5147
Fascetta Serracavo

151665147
178513: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-006-2728
Piastra Speciale

150062728
0-11018: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-159-9737
Rubber Bumper

151599737
122603675: RNCC: 3 | RNVC: 2

19 Apr 2004

5340-15-206-2984
Landing G Body Assy

152062984
GP3740B: RNCC: 3 | RNVC: 2

1 Jun 2012

5340-15-185-4664
Tasselli A Calza Fi

151854664
18X85: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-108-8249
Gambo Estremita A D

151088249
1395125: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-215-3349
Cerniera A Metro In

152153349
CERNIERA32X0,7: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-222-2807
Hinge (P.D.R. X Age

152222807
ART.020815681: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-192-5484
Gear Upper Idler

151925484
117865-B: RNCC: 3 | RNVC: 2

26 Mar 2010

5340-15-108-6508
Chiusura A Ginocchi

151086508
60144783: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-232-9590
Tassello In Acciaio

152329590
SLM12 VITE: RNCC: 3 | RNVC: 2
534015E151690: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-074-4145
Turnbuckle

150744145
1D20UNI2018A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-123-8308
Cerniera Sx

151238308
7650038: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-117-7787
Resilient Mount

151177787
1R 517075LB: RNCC: 3 | RNVC: 2
1R 517075LB: RNCC: 5 | RNVC: 9

18 Oct 1994

5340-15-166-5247
Filter Box Cover

151665247
83496510: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-178-0018
Nottolino Supporto

151780018
629/C: RNCC: 3 | RNVC: 2
(241)A1829629/C: RNCC: 5 | RNVC: 2

25 Aug 2004

5340-15-198-7645
Morsetto Di Protezi

151987645
M2VA80B/9: RNCC: 3 | RNVC: 2

16 Nov 2004

5340-15-179-2079
Manual Control Handle

151792079
69821: RNCC: 3 | RNVC: 2

10 Aug 2006

5340-15-200-1582
Shock Mount Pad

152001582
050648: RNCC: 3 | RNVC: 2
(241)A3593050648: RNCC: 5 | RNVC: 2

11 Oct 2005

5340-15-175-0439
Fixing System

151750439
16214: RNCC: 3 | RNVC: 2

29 Dec 2003

5340-15-109-2937
Resilient Mount

151092937
9039009500: RNCC: 3 | RNVC: 2
90390035000: RNCC: 3 | RNVC: 2
1391347: RNCC: 3 | RNVC: 2
(241)AF9081391347: RNCC: 5 | RNVC: 2
90390035000: RNCC: 5 | RNVC: 2
1391347: RNCC: 5 | RNVC: 2

30 Mar 1988

5340-15-138-2876
Elettroserratura

151382876
11721: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-106-2292
Smorzatore Vibrazio

151062292
12.500.267: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-117-7306
Blocco Di Fermo Spe

151177306
142513100: RNCC: 3 | RNVC: 2

13 Jan 1994

5340-15-068-6416
Cover Plate Access

150686416
W 010656: RNCC: 3 | RNVC: 2
(7001)5340150686416: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-005-6427
Anello Speciale

150056427
0-15868: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-117-4869
Fermo Finestrino

151174869
26317-102B00: RNCC: 3 | RNVC: 2

27 Oct 1993

5340-15-109-5305
Dust And Moisture Seal Protective Plug

151095305
GB488-003-000: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-110-5168
Slide

151105168
205-105-002: RNCC: 3 | RNVC: 2

1 Apr 1998

5340-15-153-8071
Access Door

151538071
129-0640-32-141: RNCC: 3 | RNVC: 2

1 Mar 2001

5340-15-050-3602
Tornichetto

150503602
EF6-45A: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-104-4335
Testa Tira Forcella

151044335
1366342: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-115-2337
Bushing

151152337
518023630: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-166-5176
Supporto Dx

151665176
39A785223502: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-149-0632
Tampone Ammortizzat

151490632
970804: RNCC: 3 | RNVC: 2

23 Nov 1998

5340-15-198-3274
Corrosion Preventive Anode

151983274
DN25DC30: RNCC: 3 | RNVC: 2

22 Sep 2004

5340-15-193-2320
Angle Bracket

151932320
504159528: RNCC: 3 | RNVC: 2
(241)A4249504159528: RNCC: 5 | RNVC: 2

22 Apr 2010

5340-15-158-5506
Rubber Bumper

151585506
122607467: RNCC: 3 | RNVC: 2

9 Mar 2004

5340-15-120-4579
Staffalegaleggerasp

151204579
145363-1: RNCC: 3 | RNVC: 2

29 May 1995

5340-15-053-9600
Fascetta

150539600
FL0053-1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-215-3887
Cilindro Mm.66 28-2

152153887
CILINDRO66MM.: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-152-9048
Porta (1) Molla

151529048
71056F91: RNCC: 3 | RNVC: 2

7 Nov 2000

5340-15-213-8887
Fermaporta A Pedale

152138887
2391IBFM: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-139-7774
Chiavistello

151397774
1000237: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-156-3232
Bracket

151563232
(241)A3460NN77716P02: RNCC: 3 | RNVC: 2
NN77716P02: RNCC: 3 | RNVC: 2

27 Jan 2003

5340-15-118-6124
Calotte

151186124
73131675: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-170-6204
Clamp

151706204
SF260-13-47-11: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-15-115-8466
Bracket

151158466
245451G2: RNCC: 3 | RNVC: 2
71-02-005-015: RNCC: 3 | RNVC: 2

1 Feb 1993

5340-15-201-1445
Pipe Covering Protection Saddle

152011445
F5326: RNCC: 3 | RNVC: 2

6 Jun 2006

5340-15-204-5250
Dust And Moisture Seal Boot

152045250
GZ25511: RNCC: 3 | RNVC: 2
332/G9825: RNCC: 5 | RNVC: 2

8 Nov 2011

5340-15-007-2619
Nut And Bolt Locking Plate

150072619
1387749: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-206-8797
Dust And Moisture Seal Protective Plug

152068797
41772065F: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-177-3699
Manual Control Lever

151773699
022362: RNCC: 3 | RNVC: 2
170011019: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-188-2224
Staffa

151882224
142055219: RNCC: 3 | RNVC: 2
(241)A0199142055219: RNCC: 5 | RNVC: 2

7 Aug 2009

5340-15-219-8566
Tubetto Ferma Viti

152198566
ML 50: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-175-0445
Fixing System

151750445
14216: RNCC: 3 | RNVC: 2

29 Dec 2003

5340-15-151-7853
Double Angle Bracket

151517853
0-175982: RNCC: 3 | RNVC: 2

10 Jul 2000

5340-15-153-4023
Elettro-Me Raccordo

151534023
5137-351-10: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-141-3675
Chiavistello

151413675
5088-238-08: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-115-5440
Corpo Piastra Ngb2

151155440
D0369674: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-139-3757
Staffa

151393757
42043604: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-065-5924
Cinghia Di Tenuta

150655924
001101831020: RNCC: 5 | RNVC: 2
001101831020: RNCC: 5 | RNVC: 9

27 Feb 1985

5340-15-192-6477
Fermaglio

151926477
V17404: RNCC: 3 | RNVC: 2

26 Mar 2010

5340-15-178-9939
Top Support

151789939
RS 404 770 A: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-179-1697
Flange

151791697
RS 417 517 A: RNCC: 3 | RNVC: 2

13 Jun 2006

5340-15-149-5194
Stand Base (1)

151495194
112705663: RNCC: 3 | RNVC: 2

25 Sep 2000

5340-15-112-4250
Plate

151124250
122TE2003-1: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-193-7226
Dust And Moisture Seal Protective Cap

151937226
3AL79268AAAA: RNCC: 3 | RNVC: 2

2 Jul 2010

5340-15-169-0320
Lucchetto C.

151690320
F72005387: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-065-3486
Dust And Moisture Seal Protective Cap-Plug

150653486
15318-2 AEP: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-15-045-1219
Bussola

150451219
N0R2-412-03GA3: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-009-0357
Electronic Equipment Hardware Kit

150090357
XXI140: RNCC: 3 | RNVC: 2
XXI140: RNCC: 5 | RNVC: 2
XXI140: RNCC: 5 | RNVC: 9

26 Sep 1980

5340-15-103-3675
Gancio Speciale

151033675
SR 2154: RNCC: 3 | RNVC: 2

22 Mar 1988

5340-15-207-3326
Grooved Clamp Coupling Ferrule

152073326
392771X1: RNCC: 3 | RNVC: 2

9 Oct 2012

5340-15-221-4557
Padlock

152214557
EX5340RI7420060: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-127-2373
Ganascia Completa M

151272373
4018399: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-118-4316
Staffa Di Bloccaggi

151184316
60154202: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-112-8621
Access Door

151128621
471743: RNCC: 3 | RNVC: 2
D0471743: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-158-5238
Control Rod

151585238
263A1878-413: RNCC: 3 | RNVC: 2

1 Mar 2004

5340-15-104-4346
Testa Tira Forcella

151044346
22968: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-169-7219
Lucchetto S&G

151697219
F72018178: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-213-7706
Placca Metallica 'N

152137706
PLACCANR5: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-179-9540
Dust And Moisture Seal Protective Cover

151799540
00185181: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-193-6607
Tirante

151936607
163121475: RNCC: 3 | RNVC: 2
(241)A0199163121475: RNCC: 5 | RNVC: 2

28 Jun 2010

5340-15-120-8316
Foot Support

151208316
741280: RNCC: 3 | RNVC: 2

4 Sep 1995

5340-15-120-7093
Headless Straight Rod

151207093
555-42-0150: RNCC: 3 | RNVC: 2
555542015000: RNCC: 3 | RNVC: 2

27 Jan 2004

5340-15-054-0762
Spina Per Cerniera

150540762
260-18-12-19: RNCC: 3 | RNVC: 2
260-18-12-19: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-106-6965
Alime Morsetto Tubi

151066965
000.8451.0: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-120-8203
Lega Leg Adattatore

151208203
127230: RNCC: 3 | RNVC: 2

4 Jul 1996

5340-15-177-4314
Headless Straight Rod

151774314
050953: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-057-2657
Access Cover Plate

150572657
1376-09-452: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-193-6611
Collare Superiore

151936611
163121483: RNCC: 3 | RNVC: 2
(241)A0199163121483: RNCC: 5 | RNVC: 2

28 Jun 2010

5340-15-122-5514
Stopp Bush

151225514
01TL21259: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-193-7866
Support

151937866
2152205: RNCC: 3 | RNVC: 2

13 Jul 2010

5340-15-004-9827
Medium Range Protec

150049827
627708: RNCC: 3 | RNVC: 2

9 Dec 2013

5340-15-060-0160
Base Shock Mount

150600160
C15663-1: RNCC: 3 | RNVC: 2
C15663-1: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-001-0737
Automatic Closing Fire Door Hardware Kit

150010737
PB1018_ACCESSORI: RNCC: 3 | RNVC: 2
AAFPB1018ACCESSORI: RNCC: 5 | RNVC: 2

27 May 2013

5340-15-103-4256
Arm

151034256
276983ART24: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-189-2625
Capuchon Fermeture

151892625
390700306: RNCC: 3 | RNVC: 2
0390700306: RNCC: 5 | RNVC: 2

10 Feb 2010

5340-15-181-8496
Serratura Da Addoss

151818496
11924: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-112-9136
Tronchettofilettato

151129136
786282054: RNCC: 3 | RNVC: 2

15 Jan 1996

5340-15-122-9329

5340-15-180-7473

5340-15-231-6235
Staffa

152316235
0-181529: RNCC: 3 | RNVC: 2
534015E095118: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-101-2934
Sp Grilli Di Catene

151012934
6776514-A: RNCC: 3 | RNVC: 2

24 Jul 1986

5340-15-215-3238
Chiave T. Yale Serr

152153238
CHIAVE-YALE: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-118-3797
Padlock

151183797
60158224: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-198-1748
Ralla

151981748
D1421279: RNCC: 3 | RNVC: 2

22 Jun 2004

5340-15-089-9367
Dust And Moisture Seal Protective Cap

150899367
A106073: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-144-6619
Tasselli In Gomma

151446619
7-0-06: RNCC: 3 | RNVC: 2
7-0-06: RNCC: 3 | RNVC: 2

11 Dec 1996

5340-15-109-8461
Disco Di Fissaggio

151098461
220321/22: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-232-3844
Rondella Piatta

152323844
5387/26 3-12/13: RNCC: 3 | RNVC: 2
534015E150099: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-219-8022
Morsetto Fune M5

152198022
M5: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-100-5385
Dust And Moisture Seal Protective Cap

151005385
CME Y3078 IE: RNCC: 3 | RNVC: 2

19 Feb 1987

5340-15-107-7742
Terminale

151077742
212-9020-21-3: RNCC: 3 | RNVC: 2

29 Jun 1988

5340-15-065-7913
Serie Guarnizioni M

150657913
1.203.0097A: RNCC: 3 | RNVC: 2

21 May 1985

5340-15-139-9275
Supporto Elastico

151399275
I267RA: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-112-2907
Ritegno Speciale

151122907
263A1732-401: RNCC: 3 | RNVC: 2

10 Apr 1991

5340-15-193-4677
Base Antivibrante P

151934677
E6149.0000: RNCC: 3 | RNVC: 2

17 May 2010

5340-15-156-2044
Staffa Di Attacco P

151562044
(241)A3460CBD70761P14: RNCC: 3 | RNVC: 2
CBD70761P14: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-207-8547
Support

152078547
440-9-6-4: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-153-3039
Headless Straight Rod

151533039
122605222: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-15-002-5984
Utility Resilient Mount

150025984
1503005: RNCC: 3 | RNVC: 2

4 Sep 2013

5340-15-174-9046
Ammortizzatore

151749046
145511921: RNCC: 3 | RNVC: 2

17 Oct 2003

5340-15-118-0434
Piastra In Ferro

151180434
D0485492: RNCC: 3 | RNVC: 2

5 Dec 1994

5340-15-120-6473
Puntale Per Manipol

151206473
D0486594: RNCC: 3 | RNVC: 2

1 May 1996

5340-15-103-4816
Fascetta Di Serragg

151034816
N120002610: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-118-0474
Coperchio In Ferro

151180474
D0488081: RNCC: 3 | RNVC: 2

18 Nov 1994

5340-15-217-6894
Tagliatubi Rame

152176894
99363: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-105-6360
Collare Serraggio

151056360
560273: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-020-2098
Raccordo Tirante Le

150202098
01-231Q53: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-051-4235
Guarnizione

150514235
4549931: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-155-5201
Access Door

151555201
DE004.03.142: RNCC: 3 | RNVC: 2
(241)A5015DE004.03.142: RNCC: 3 | RNVC: 2

8 Apr 2002

5340-15-231-0585
Cinghia Con Foro Pe

152310585
00200PMPN: RNCC: 3 | RNVC: 2
534015E112342: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-005-6112
Anello Speciale

150056112
0-15851: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-154-9342
L.P. Injector Assy

151549342
CBD71096G01: RNCC: 3 | RNVC: 2

13 Nov 2001

5340-15-156-3691
Oil Filter Plug

151563691
(241)A3460CBD71339G01: RNCC: 3 | RNVC: 2
CBD71339G01: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-105-6686
Porta Maniglia

151056686
4973703: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-120-6974
Piastrina Metallica

151206974
D1401534: RNCC: 3 | RNVC: 2

4 Jul 1996

5340-15-118-8347
Loop Clamp Kit

151188347
9449210: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-005-1587
Control Rod

150051587
4163910: RNCC: 3 | RNVC: 2
4163910: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-163-2997
Stophebel

151632997
5200.414: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-166-4932
Staffa

151664932
93927210: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-166-5035
Bracket

151665035
UA29021B03C: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-166-4922
Supporto Antivibr.T

151664922
ART3318505: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-108-6205
Control Rod

151086205
8857766: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-179-7325
Dust And Moisture Seal Protective Cap

151797325
99474206: RNCC: 3 | RNVC: 2
(241)A424999474206: RNCC: 5 | RNVC: 2

7 Jun 2007

5340-15-233-7157
Collare Fissaggio C

152337157
GG0004: RNCC: 3 | RNVC: 2
534015E023210: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-127-3889
Boccola

151273889
830083: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-174-6580
Driveand Bracket

151746580
6102208358: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-15-154-7916
Extension Drawer Slide

151547916
205.105.003: RNCC: 3 | RNVC: 2

26 Sep 2001

5340-15-001-0310
Manual Control Lever

150010310
504376051: RNCC: 3 | RNVC: 2

15 May 2013

5340-15-178-3872
Resilient Mount

151783872
P531006: RNCC: 3 | RNVC: 2

31 May 2005

5340-15-110-5242
Sleeve

151105242
440.924: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-074-4225
Turnbuckle

150744225
2C10UNI2019AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-119-2911
Resilient Mount

151192911
TM9.0358.053.00: RNCC: 3 | RNVC: 2
TM9.0358.053.00: RNCC: 5 | RNVC: 9

6 Feb 1995

5340-15-230-2557
Supporto Pompa Comp

152302557
310184F91: RNCC: 3 | RNVC: 2
534015E146672: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-205-5107
Special Protezione

152055107
178950510: RNCC: 3 | RNVC: 2
(241)A0199178950510: RNCC: 5 | RNVC: 2

15 Mar 2012

5340-15-166-4949
Fascetta

151664949
1840106: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-136-8270
Rullo

151368270
S6152-61075-5: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-178-6070
Blade

151786070
564.19783: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-194-4360
Paracolpo In Strisc

151944360
BP5041: RNCC: 3 | RNVC: 2
(241)ADA53BP5041: RNCC: 5 | RNVC: 2

12 Nov 2010

5340-15-179-6085
Key Blank

151796085
V1087: RNCC: 3 | RNVC: 2

11 Apr 2007

5340-15-074-4286
Turnbuckle

150744286
2A20UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-203-0318
Supporto Pompa Carb

152030318
1130096: RNCC: 3 | RNVC: 2
(241)A50091130096: RNCC: 5 | RNVC: 2

19 Nov 2007

5340-15-101-2193
Handwheel

151012193
468639: RNCC: 3 | RNVC: 2

20 Jun 1996

5340-15-125-5417
Confezione Fascette

151255417
COFEZFASCETTECORTE: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-110-5382
Screwed Plug

151105382
171.174: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-113-8545
Helical Compression Spring Seat

151138545
1P 547345: RNCC: 3 | RNVC: 2
1P 547345: RNCC: 5 | RNVC: 9

19 May 1993

5340-15-007-1823
Turnbuckle

150071823
1394164: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-007-9702
Cover Plate Access

150079702
4434483: RNCC: 3 | RNVC: 2
4434483: RNCC: 5 | RNVC: 9

22 Sep 1979

5340-15-213-8236
Avvolgitore Int.Zin

152138236
2005-FZO: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-156-3912
Centering Ring

151563912
CBD71355P06: RNCC: 3 | RNVC: 2
(241)A3460CBD71355P06: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-166-4818
Tassello Fischer Di

151664818
FISCHERDIAM10: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-212-1103
Fascetta 250Mm Norm

152121103
4/11669: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-115-2938

5340-15-005-0406
Shock Mount

150050406
781083H: RNCC: 3 | RNVC: 2

16 Sep 1980

5340-15-206-9176
Assem Angle Bracket

152069176
155442-1: RNCC: 3 | RNVC: 2
(241)A0076155442-1: RNCC: 5 | RNVC: 2

26 Jul 2012

5340-15-216-8689
Cartucce Chimiche I

152168689
FEB-RM12: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-163-1140
Rim Pliers

151631140
2005957: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-112-2672
Helical Compression Spring Seat

151122672
773150: RNCC: 3 | RNVC: 2

30 Apr 1988

5340-15-199-8076
Fungo Bronzo

151998076
60940: RNCC: 3 | RNVC: 2
(241)A098460940: RNCC: 5 | RNVC: 2

7 Jun 2005

5340-15-166-4873
Serratura Meccanica

151664873
CISAMECCANICA: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-137-0857
Molla

151370857
66516: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-220-0864
Piolo

152200864
0839-42: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-219-9202
Tassello Nylon Aps

152199202
29922100: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-191-3163
Anello

151913163
18782: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-153-4766
Handwheel

151534766
5340151534766: RNCC: 2 | RNVC: 2
142010016: RNCC: 2 | RNVC: 3

1 Feb 2001

5340-15-112-1337
Sostegnorele

151121337
DE004.01.597: RNCC: 3 | RNVC: 2

12 Feb 1991

5340-15-127-5308
Molla

151275308
877199: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-112-8314
Portag

151128314
467236: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-068-1874
Asta Speciale

150681874
476907: RNCC: 3 | RNVC: 2

1 Apr 1986

5340-15-152-9357
Dust And Moisture Seal Protective Cap-Plug

151529357
565706: RNCC: 3 | RNVC: 2
44200000058/4: RNCC: 5 | RNVC: 2

9 Nov 2000

5340-15-196-9928
Padlock

151969928
PN UAS 00032895: RNCC: 3 | RNVC: 2
5340F76029328: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-155-5756
Tappo In Nylon

151555756
A196A375B: RNCC: 3 | RNVC: 2

12 Apr 2002

5340-15-008-4860
Nut And Bolt Locking Plate

150084860
4606957: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-101-3095
Complessiv Maniglia

151013095
NHP00/4: RNCC: 3 | RNVC: 2

1 Apr 1998

5340-15-116-8537
Guida A Cavallotto

151168537
D1402627: RNCC: 3 | RNVC: 2

6 Apr 1994

5340-15-210-3757
Inserto Pressare A

152103757
J75RNR1010: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-141-4415
Lastra

151414415
W015583: RNCC: 3 | RNVC: 2
(7001)5340151414415: RNCC: 5 | RNVC: 2

9 Jun 1997

5340-15-205-1154
Shaft Joint

152051154
23130095: RNCC: 3 | RNVC: 2

21 Feb 2012

5340-15-122-2769
Cache Poussiere

151222769
800052450: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-120-6776
Coperchio Gruppo Se

151206776
D0491993: RNCC: 3 | RNVC: 2

10 Jul 1996

5340-15-203-8849
Rete Zincata

152038849
RETE: RNCC: 3 | RNVC: 2
(241)AD445RETE: RNCC: 5 | RNVC: 2

13 Jul 2011

5340-15-178-6023
Buffer

151786023
BARRY-C.-C2020-HDSB-M10: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-154-9349
L.P. Bl Cover Assy

151549349
CBD71102G01: RNCC: 3 | RNVC: 2

13 Nov 2001

5340-15-005-6493
Coperchio Speciale

150056493
0-25836: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-129-7255
Turnbuckle

151297255
9261288: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-216-5733
Catenaccio A Leva I

152165733
CAT-LEVA-CM20: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-118-2823
Coperchio Premiguar

151182823
D0485534: RNCC: 3 | RNVC: 2

20 Apr 1995

5340-15-218-0093
Snap Hook

152180093
401-50: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-062-5147
Guida Scorrevole Co

150625147
219AS1612-2: RNCC: 3 | RNVC: 2

22 Jul 1982

5340-15-074-4176
Turnbuckle

150744176
2A8UNI2019AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-179-0646
Dust And Moisture Seal Boot

151790646
R3,2489: RNCC: 3 | RNVC: 2

20 Apr 2006

5340-15-117-4050
Coperchio Valvola D

151174050
D0466451: RNCC: 3 | RNVC: 2

6 Apr 1994

5340-15-002-4774
Molla Richiamo Mass

150024774
S26-115: RNCC: 3 | RNVC: 2
S26-115: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-152-0509
Tbos Eu Bracket

151520509
8854 124-121: RNCC: 3 | RNVC: 2

3 Aug 2000

5340-15-147-5186
Squadretta Speciale

151475186
44886-001: RNCC: 5 | RNVC: 2
44886-001: RNCC: 5 | RNVC: 9
44886-001: RNCC: 5 | RNVC: 9

12 Dec 1997

5340-15-119-5391
Sede Sfogo Di Aria

151195391
D0483247: RNCC: 3 | RNVC: 2

24 Mar 1995

5340-15-181-0719
Reinforcement Ring

151810719
N925G1580201: RNCC: 3 | RNVC: 2

15 Oct 2008

5340-15-110-1019
Coperchio Speciale

151101019
201CA270-2TR: RNCC: 3 | RNVC: 2

10 Apr 1990

5340-15-139-3729
Staffa

151393729
42034550: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-214-0908
Inserto A Croce 'Po

152140908
F3001PZD: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-137-1099
Molla

151371099
47-620-935-1: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-186-8242
Key Blank

151868242
LF2: RNCC: 3 | RNVC: 2

5 Jan 2009

5340-15-166-5065
Probe Ass

151665065
41293001: RNCC: 3 | RNVC: 2
41293001: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-166-4967
Inserto (Cannone Vu

151664967
7210096531: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-062-0103
Handle

150620103
C7123R1A1: RNCC: 3 | RNVC: 2
C7123R1A1: RNCC: 5 | RNVC: 2
C7123R1A1: RNCC: 5 | RNVC: 9

27 Oct 1980

5340-15-183-4958
Ganci Diversi

151834958
COMM631018020007: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-166-4863
Serratura

151664863
536050: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-231-1116
Spingiporte A Molla

152311116
36080/3: RNCC: 3 | RNVC: 2
534015E073449: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-120-7545
Column

151207545
GB254-420-064: RNCC: 3 | RNVC: 2

31 Jul 1995

5340-15-170-8561
Lastra Semiri.Pvc 0

151708561
58221-02/092: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-214-8328
Maniglia Antipanico

152148328
ART.46000: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-121-7474
Double Angle Bracket

151217474
740416: RNCC: 3 | RNVC: 2

14 Feb 1996

5340-15-001-8834
Anello Antiestrusio

150018834
61701025: RNCC: 3 | RNVC: 2

18 Jul 2013

5340-15-007-2793
Fissaggio Gaffetta

150072793
1390881: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-006-6729
Cap

150066729
127981: RNCC: 3 | RNVC: 2

24 Nov 1979

5340-15-115-7021
Premibanderna

151157021
D0470016: RNCC: 3 | RNVC: 2

10 Mar 1994

5340-15-115-6085
Coperchio Scatola

151156085
D0470467: RNCC: 3 | RNVC: 2

24 Mar 1994

5340-15-113-2399
Portelloditenuta

151132399
252A2141-403: RNCC: 3 | RNVC: 2

12 Apr 1991

5340-15-001-5653
Key Blank

150015653
DL3: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-210-7037
Filetto Riportato 8

152107037
512411: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-151-6961
Piastra

151516961
0-178705: RNCC: 3 | RNVC: 2

30 Jun 2000

5340-15-213-8812
Contropiastra Regol

152138812
038 703 1: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-218-3434
Scovolino Nylon D.

152183434
D20X300: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-185-6080
Barra Ovale Orizzon

151856080
945928: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-053-7312
Staffa

150537312
539995: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-105-8953
Tirante A Teste Fil

151058953
7982: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-184-3166
Lucchetto Di Sicure

151843166
C0MM631020060008: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-174-6607
Terminal Board Fron

151746607
9903905754: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-15-118-0863
Control Rod

151180863
D0469361: RNCC: 3 | RNVC: 2

16 Dec 1994

5340-15-107-7433
Dust And Moisture Seal Protective Cap

151077433
7-869: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-162-6299
Shock Absorber

151626299
MPSE-1: RNCC: 3 | RNVC: 2

7 Dec 2001

5340-15-007-3937
Tirante

150073937
0-34086: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-151-9567
Flangia

151519567
42116746: RNCC: 3 | RNVC: 2
42116746: RNCC: 5 | RNVC: 2
(241)A396300119923: RNCC: 5 | RNVC: 2
0-119923: RNCC: 5 | RNVC: 2

27 Jul 2000

5340-15-052-1394
Stand Off

150521394
H793-12-40-08: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-158-5736
Rubber Bumper

151585736
122650214: RNCC: 3 | RNVC: 2

9 Mar 2004

5340-15-173-2945
Adattatore Per Moll

151732945
39700 11200: RNCC: 1 | RNVC: 2

1 Jun 2003

5340-15-105-2084
Rubber Bumper

151052084
4974625: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-153-0029
Supporto Filtro Oli

151530029
61770F92: RNCC: 3 | RNVC: 2

14 Nov 2000

5340-15-155-3258
Resilient Mount

151553258
60190198: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-15-000-8545
Corrosion Preventive Anode

150008545
EMR199899: RNCC: 3 | RNVC: 2

11 Apr 2013

5340-15-150-3906
Dust And Moisture Seal Protective Cap

151503906
M153: RNCC: 3 | RNVC: 2

2 Dec 1999

5340-15-109-6803
Dust And Moisture Seal Protective Cap

151096803
71386: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-064-7023
Bracket

150647023
A-125111-001: RNCC: 3 | RNVC: 2
A125111-001: RNCC: 5 | RNVC: 2

10 Jun 1984

5340-15-180-5321
Angle

151805321
129-0640-77-263: RNCC: 3 | RNVC: 2
(241)A0126129-0640-77-263: RNCC: 5 | RNVC: 2

16 Jun 2008

5340-15-074-4300
Turnbuckle

150744300
2A6UNI20200T60-2012AQ673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-127-5022
Staffetta Elastica

151275022
864780: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-147-0031
Tacchetto Di Guida

151470031
HF254: RNCC: 3 | RNVC: 2

4 Sep 1997

5340-15-074-4200
Turnbuckle

150744200
2B12UNI2019AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-120-6916
Flangia Per Testa C

151206916
D0469736: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-153-7681
Base (1) Per Sosteg

151537681
01900A106330: RNCC: 5 | RNVC: 2
T0064901: RNCC: 5 | RNVC: 2
01900A106330: RNCC: 5 | RNVC: 9

27 Feb 2001

5340-15-194-3953
Plug

151943953
KL34AAL: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-15-112-8596
Arrestob

151128596
468262: RNCC: 3 | RNVC: 2
D0468262: RNCC: 3 | RNVC: 2

4 Feb 1993

5340-15-117-4241
Complessi Supporto

151174241
142514922: RNCC: 3 | RNVC: 2

4 Oct 1993

5340-15-112-8593
Premim

151128593
D0468270: RNCC: 3 | RNVC: 2
468270: RNCC: 3 | RNVC: 2

1 Apr 1998

5340-15-147-5785
Nippel

151475785
98NI950: RNCC: 3 | RNVC: 2

30 Dec 1997

5340-15-199-9517
Nonmetallic Bumper

151999517
390-046-002: RNCC: 3 | RNVC: 2

28 Jul 2005

5340-15-147-5742
Support Assembly Rh

151475742
SF260-18-140-02: RNCC: 5 | RNVC: 2
SF260-18-140-02: RNCC: 5 | RNVC: 9

30 Dec 1997

5340-15-231-4440
Supporto Fisso Diam

152314440
RPR200/F: RNCC: 3 | RNVC: 2
534015E094080: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-120-4745
Threaded End Tensioning Tie Rod

151204745
1Z 601110: RNCC: 3 | RNVC: 2
1Z 601110: RNCC: 5 | RNVC: 9

5 Nov 1996

5340-15-120-8360
Handwheel

151208360
301249: RNCC: 3 | RNVC: 2

4 Sep 1995

5340-15-108-7912
Nonmetallic Solid Wheel

151087912
2510090: RNCC: 3 | RNVC: 2

27 Oct 1989

5340-15-152-3547
Multiple Angle Bracket

151523547
0-173953: RNCC: 3 | RNVC: 2
00173953: RNCC: 3 | RNVC: 2
(241)A39630-173953: RNCC: 5 | RNVC: 2

4 Sep 2000

5340-15-148-7524
Assieme Guida

151487524
2203-0010-001: RNCC: 3 | RNVC: 2

30 Sep 1998

5340-15-195-2128
Clamping Guide

151952128
56680015: RNCC: 3 | RNVC: 2

7 Mar 2011

5340-15-212-0798
Tela Smeriglio Gran

152120798
TELA SMERIGLIO 600: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-113-2467
Cernieracomplessivo

151132467
312A6465-401: RNCC: 3 | RNVC: 2

15 Apr 1991

5340-15-005-3591
Resilient Mount

150053591
1380078: RNCC: 3 | RNVC: 2
1380078: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-231-7549
Lucchetto Mm.50 "Co

152317549
110-50: RNCC: 3 | RNVC: 2
534015E035414: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-180-2263
Dust And Moisture Seal Protective Cover

151802263
504247136: RNCC: 3 | RNVC: 2

15 Feb 2008

5340-15-115-6088
Scatola Coperchio

151156088
D0468447: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-120-6890
Paletta Per Servomo

151206890
D0471279: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-119-9125
Guida

151199125
142004184: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-184-0730
Cerniere Assortite

151840730
C0MM631019030022: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-166-4846
Fermaglio

151664846
4699549: RNCC: 3 | RNVC: 2
4699549: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-040-5322
Fascetta

150405322
N1-02916-90T14148: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-110-3334
Block

151103334
A27608-01-20: RNCC: 3 | RNVC: 2
A27608-01-20: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-215-5202
Supporto Dischi Abr

152155202
7885G-30: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-000-4353
Corrosion Preventive Anode

150004353
30310436745: RNCC: 3 | RNVC: 2

1 Mar 2013

5340-15-001-8338
Extension Drawer Slide

150018338
500433227: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-007-9945
Nut And Bolt Retainer

150079945
4613353: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-172-0759
Maniglione Con Ganc

151720759
MANIGLIONE CON GANCIO CENTRALE C: RNCC: 1 | RNVC: 2

1 Jun 2003

5340-15-154-5113
Staffa (1) Accessor

151545113
1T 548229LA: RNCC: 3 | RNVC: 2
1T 548229LA: RNCC: 5 | RNVC: 9

20 Jun 2001

5340-15-170-7479
Drive End Bracket S

151707479
6102312152: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-232-4671
Snodo Per Tirante D

152324671
8016587: RNCC: 3 | RNVC: 2
534015E081782: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-232-2856
Plate

152322856
9009.3063-1: RNCC: 3 | RNVC: 2
534015E116372: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-007-0861
Morsetto Speciale

150070861
0-16032: RNCC: 3 | RNVC: 2

29 Jun 1979

5340-15-153-6984
Cerniera (1) A Band

151536984
121107273: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-116-4864
Double Angle Bracket

151164864
60164700: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-118-0471
Coperchio In Acciai

151180471
D0487595: RNCC: 3 | RNVC: 2

18 Nov 1994

5340-15-154-9200
Support

151549200
CBD70713P05: RNCC: 3 | RNVC: 2

12 Nov 2001

5340-15-109-8989
Puntalino Segnalazi

151098989
467805: RNCC: 3 | RNVC: 2
D0467805: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-178-8170
Dust And Moisture Seal Protective Cap

151788170
27H-291A03000-003-526: RNCC: 3 | RNVC: 2

15 Dec 2005

5340-15-127-4433
Anello

151274433
1740-16-077: RNCC: 3 | RNVC: 2
1740-16-077: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-166-5046
Rod End

151665046
232A1968003: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-127-3991
Tirante

151273991
1741-80-002: RNCC: 3 | RNVC: 2
1741-80-002: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-151-3296
Assi Asta Speciale

151513296
13906-001A1: RNCC: 3 | RNVC: 2

15 May 2000

5340-15-007-1802
Resilient Mount

150071802
1384665: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-074-4068
Turnbuckle

150744068
1B72UNI2018A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-122-9385
Inserto

151229385
SL10429-3-4S: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-148-9193
Padlock

151489193
07508-02150: RNCC: 3 | RNVC: 2
600-4001-005: RNCC: 3 | RNVC: 2

2 Nov 1998

5340-15-113-7929
Semicerniera

151137929
129-0640-77-205: RNCC: 3 | RNVC: 2

27 Feb 1992

5340-15-136-6698
Paracolpi

151366698
S6122-83110-35: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-106-0681
Scodellino Molla

151060681
V2576-16: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-136-1195
Angolare

151361195
A1042104-101: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-007-7682
Nut And Bolt Locking Plate

150077682
4669970: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-068-2557
Piastra

150682557
RS 401 787: RNCC: 3 | RNVC: 2

27 Oct 1984

5340-15-103-6681
Resilient Mount Plate

151036681
24009308A: RNCC: 3 | RNVC: 2

26 Nov 1987

5340-15-120-0961
Dust And Moisture Seal Protective Plug

151200961
12332885: RNCC: 3 | RNVC: 2

19 Dec 1994

5340-15-101-4133
Assieme Leva

151014133
1576-05-029: RNCC: 3 | RNVC: 2
157605029: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-000-3433
Angle Bracket

150003433
32898: RNCC: 3 | RNVC: 2
7404891: RNCC: 5 | RNVC: 2

22 Feb 2013

5340-15-114-6037
Cover

151146037
79331F91/D: RNCC: 3 | RNVC: 2

23 Jun 1992

5340-15-231-0713
Maniglia Sicur.Port

152310713
M83943: RNCC: 3 | RNVC: 2
534015E151277: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-134-3548
Fascetta

151343548
22466: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-156-3835
Plugging Plate

151563835
CBD71339P01: RNCC: 3 | RNVC: 2
(241)A3460CBD71339P01: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-004-2602
Resilient Mount

150042602
1385738: RNCC: 3 | RNVC: 2
1385738: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-135-8456
Tappo Di Sughero

151358456
LLLS731TYIGRACL1N9: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-160-0799
Padlock

151600799
F720039901: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-111-3961
Supporto

151113961
345A3534-001: RNCC: 3 | RNVC: 2

27 Oct 1990

5340-15-055-5103
Cerniera Speciale

150555103
4133-032: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-136-0083
Pomello

151360083
1420-55094: RNCC: 3 | RNVC: 2
1420-55094: RNCC: 5 | RNVC: 9

9 Oct 1996

5340-15-138-2244
Tenditore Ad Occhio

151382244
TE20C00140: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-136-7594
Inserto

151367594
SA062V: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-116-8564
Indice Per Asta Gra

151168564
D1402552: RNCC: 3 | RNVC: 2

8 Apr 1994

5340-15-179-8964
Dust And Moisture Seal Protective Cap

151798964
D1308566: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-213-8864
Chiudiporta Aerodin

152138864
D06090: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-074-4099
Turnbuckle

150744099
1C12UNI2018A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-008-3705
Helical Compression Spring Retainer

150083705
4732116: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-009-5821
Helical Compression Spring Seat

150095821
75450811: RNCC: 3 | RNVC: 2
9981264: RNCC: 5 | RNVC: 2
75450811: RNCC: 5 | RNVC: 9

22 Sep 1979

5340-15-105-5953
Staffa A Gomito

151055953
4567599: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-231-0320
Tenditore A Gancio

152310320
11C 10UNI2021: RNCC: 3 | RNVC: 2
534015E151678: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-105-6014
Staffa A Gomito

151056014
9909833: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-154-5570
Serie Lucchetti

151545570
122697125: RNCC: 2 | RNVC: 3

13 Jul 2001

5340-15-156-3584
Dust Protective Cap

151563584
(241)A3460CBD71078P01: RNCC: 3 | RNVC: 2
CBD71078P01: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-185-4862
Spezzone Tubo Rame

151854862
770079: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-119-7731
Nonmetallic Bumper

151197731
4023905: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-156-3605
Block

151563605
(241)A3460CBD71402P07: RNCC: 3 | RNVC: 2
CBD71402P07: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-139-4547
Tirante

151394547
4741957: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-198-8526
Canotto Di Protezio

151988526
58529000201D: RNCC: 3 | RNVC: 2
(241)A312158529000201D: RNCC: 5 | RNVC: 2

22 Nov 2004

5340-15-121-4089
Plug

151214089
D1-36034-001: RNCC: 3 | RNVC: 2
D1-36034-001: RNCC: 5 | RNVC: 9

12 Dec 1995

5340-15-205-0611
Rete Barriera Di Pl

152050611
UG-TENAX: RNCC: 3 | RNVC: 2
(241)AD751UG-TENAX: RNCC: 5 | RNVC: 2

16 Feb 2012

5340-15-151-6727
Dust And Moisture Seal Protective Cap-Plug

151516727
4860496: RNCC: 3 | RNVC: 2

26 Jun 2000

5340-15-194-2048
Manual Control Handle

151942048
28477: RNCC: 3 | RNVC: 2
OC0022: RNCC: 5 | RNVC: 2

5 Oct 2010

5340-15-068-6188
Masse Con Supporto

150686188
1 198 0030A: RNCC: 3 | RNVC: 2

3 May 1983

5340-15-213-8241
Arganello A Fune Ad

152138241
2270-FZ4: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-127-0982
Molla Richiamo Coma

151270982
396253: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-053-8950
Turnbuckle Body

150538950
130949-60: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-104-7924
Guarnizione

151047924
2103656: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-045-1490
Control Rod

150451490
500-13-04: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-149-6301
Support Assy

151496301
518-30-0170: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-147-5163
Alloggiamento

151475163
31805-001: RNCC: 5 | RNVC: 2
31805-001: RNCC: 5 | RNVC: 9
31805-001: RNCC: 5 | RNVC: 9

12 Dec 1997

5340-15-187-7347
Clamp Assem Bracket

151877347
J28042155-403: RNCC: 3 | RNVC: 2
(241)A0019J28042155-403: RNCC: 5 | RNVC: 2

5 May 2009

5340-15-230-2422
Staffa Fissaggio Tu

152302422
74269F91: RNCC: 3 | RNVC: 2
534015E117075: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-157-7255
Turnbuckle

151577255
TENDITORE FORC.CORTO UNI6900.71: RNCC: 3 | RNVC: 2

16 Oct 2003

5340-15-121-9045
Dispositivo Di Bloc

151219045
142507939: RNCC: 3 | RNVC: 2

19 Mar 1996

Load More Results