What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 41 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 41 of 72

5340-15-074-4429
Turnbuckle

150744429
2B10UNI2021AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-006-6963
Plug

150066963
505A115: RNCC: 3 | RNVC: 2

9 Jan 1980

5340-15-220-0793
Rh(Super Hinge Assy

152200793
311A7310-404: RNCC: 3 | RNVC: 2
(241)A0019311A7310-404: RNCC: 5 | RNVC: 2

16 Nov 2005

5340-15-205-7529
Clip Retainer Plate

152057529
109-0614-52-103: RNCC: 3 | RNVC: 2

30 Mar 2012

5340-15-101-7411
Ammortizzatore Idro

151017411
1371CE/01/120: RNCC: 3 | RNVC: 2

14 Nov 1986

5340-15-195-1847
Strap Fastener Loop

151951847
999-0500-57-10: RNCC: 2 | RNVC: 2

7 Mar 2011

5340-15-170-3874
Plate

151703874
212-075-391-003: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-204-0250
Lock-Release Lever

152040250
504314690: RNCC: 3 | RNVC: 2

19 Aug 2011

5340-15-198-3138
Asta

151983138
310436F01: RNCC: 3 | RNVC: 2

21 Sep 2004

5340-15-181-0338
Tassello Da Muro

151810338
SX8F: RNCC: 3 | RNVC: 2
(241)AB882SX8F: RNCC: 5 | RNVC: 2

1 Oct 2008

5340-15-061-5584
Electrical-Me Post

150615584
140C1A69: RNCC: 5 | RNVC: 2
140C1A69: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-156-3578
Dust Protective Cap

151563578
(241)A3460CBD71072P01: RNCC: 3 | RNVC: 2
CBD71072P01: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-112-8568
Camicia

151128568
467032: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-103-1881
Complessi Sportello

151031881
DE013.09.976: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-153-9507
Speciale Staffetta

151539507
142065119: RNCC: 2 | RNVC: 3

12 Mar 2001

5340-15-166-4918
Serratura Da Infila

151664918
4415580: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-166-5239
Sealing Ring

151665239
3683B093: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-005-5161
Resilient Mount

150055161
1391347: RNCC: 3 | RNVC: 2
1391347: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-002-7105
Molla

150027105
1411: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-166-4909
Chiusura Di Testa

151664909
SL25880: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-155-0222
Shock Mount Pad

151550222
1PA91722130908004000: RNCC: 3 | RNVC: 2
2130908004000: RNCC: 3 | RNVC: 2

8 Jan 2002

5340-15-062-5456
Mensola Speciale Co

150625456
1385923: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-193-6610
Collare Inferiore

151936610
163121482: RNCC: 3 | RNVC: 2
(241)A0199163121482: RNCC: 5 | RNVC: 2

28 Jun 2010

5340-15-186-4612
Matita Per Incision

151864612
V820 A1: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-121-6276
Cuvette

151216276
800032541: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-120-6896
Coperchio Per Corpo

151206896
D0471245: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-218-1325
Lucchetto Combinazi

152181325
16040C: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-001-6014
Bumper

150016014
42566672: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-194-8934
Disco Lamellare Zir

151948934
IMAZNL115040: RNCC: 3 | RNVC: 2
(241)AE590IMAZNL115040: RNCC: 5 | RNVC: 2

31 Jan 2011

5340-15-115-1972
Front Cowling

151151972
560-2569-165: RNCC: 3 | RNVC: 2
82-00678: RNCC: 5 | RNVC: 2

29 Nov 1992

5340-15-102-1615
Turnbuckle Body

151021615
8266-00-25: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-142-9036
Cover

151429036
474971: RNCC: 3 | RNVC: 2

22 Oct 1996

5340-15-213-8252
Serratura Da Infila

152138252
44151-70: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-005-1538
Rivet

150051538
21217DE24: RNCC: 3 | RNVC: 2

9 Dec 2013

5340-15-199-8047
Anello

151998047
D1417343: RNCC: 3 | RNVC: 2
(241)A0461D1417343: RNCC: 5 | RNVC: 2

7 Jun 2005

5340-15-212-5692
Angolari In Allumin

152125692
25X15XH2MT: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-166-4948
Sfera

151664948
123083: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-217-7182
Cilindro Decentrato

152177182
VIRO60: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-137-1268
Piastra

151371268
74412: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-139-6474
Ghiera Per Occhione

151396474
22119: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-115-7105
Maschera Per Dicitu

151157105
D0473181: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-163-3773
Spacing Threaded Standoff

151633773
9436767: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-061-3782
Supporto Metallico

150613782
P26CA114: RNCC: 5 | RNVC: 2
P26CA114: RNCC: 5 | RNVC: 9

22 Sep 1977

5340-15-138-2880
Lucchetto Mm.50

151382880
22010-50: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-074-4274
Turnbuckle

150744274
1A64UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-178-9978
Guide

151789978
RS 407 621 -R: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-166-5082
Static Port Plug

151665082
57238400020: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-198-8052
Piastra Di Montaggi

151988052
500387876: RNCC: 3 | RNVC: 2

17 Nov 2004

5340-15-059-5632
Assembled Nut Retainer

150595632
03986-801A1: RNCC: 3 | RNVC: 2

27 Mar 1976

5340-15-061-5898
Nut And Bolt Locking Plate

150615898
4137522: RNCC: 3 | RNVC: 2
4137522: RNCC: 5 | RNVC: 2
4137522: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-213-7197
Piastra Regolabile

152137197
ART-ZFA168: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-220-0865
Boccola

152200865
1839-44: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-106-0407
Colonnetta

151060407
12.506.372: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-149-3026
Guida Destra Allogg

151493026
4885316: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-211-4672
Pinze Fermaporte

152114672
PINZEFERMAPORTE: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-103-4581
Resilient Mount

151034581
81408: RNCC: 3 | RNVC: 2
81408: RNCC: 5 | RNVC: 9

12 Apr 1988

5340-15-230-1779
Relay Val. Bracket

152301779
678080: RNCC: 3 | RNVC: 2
534015E149983: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-074-4271
Turnbuckle

150744271
1A45UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-178-4696
Union Mast Collar

151784696
DYA002: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-191-6232
Band Clamp

151916232
425C75-475M: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-119-4616
Coperchio Del Mecca

151194616
16100.060: RNCC: 3 | RNVC: 2

13 Sep 1995

5340-15-179-9963
Headless Straight Rod

151799963
NN79001G02: RNCC: 3 | RNVC: 2

16 Nov 2007

5340-15-193-1346
Cover

151931346
00240R0730: RNCC: 3 | RNVC: 2

19 Apr 2010

5340-15-115-6933
Handwheel

151156933
D0468201: RNCC: 3 | RNVC: 2

8 Mar 1994

5340-15-110-4372
Hinge

151104372
2584823: RNCC: 3 | RNVC: 2
02584823: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-154-9335
Dust And Moisture Seal Protective Cap-Plug

151549335
CBD71083P02: RNCC: 3 | RNVC: 2

13 Nov 2001

5340-15-187-3251
Double Angle Bracket

151873251
98198088: RNCC: 3 | RNVC: 2
(241)A396398198088: RNCC: 5 | RNVC: 2

16 Mar 2009

5340-15-151-9373
Silentblock

151519373
0-172652: RNCC: 3 | RNVC: 2

26 Jul 2000

5340-15-101-7445
Piastra Non Forata

151017445
600X120X20DIS44125: RNCC: 3 | RNVC: 2

4 Feb 1994

5340-15-159-4726
Padlock

151594726
PN UAS 00002049: RNCC: 3 | RNVC: 2
7520F76000381: RNCC: 5 | RNVC: 9

31 Mar 2004

5340-15-120-6832
Corpo Cilindro Azio

151206832
D0486839: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-065-8025
Bracket

150658025
200886G1: RNCC: 3 | RNVC: 2

10 Jan 1986

5340-15-103-6693
Supporto Fa Staffa

151036693
24009325A: RNCC: 3 | RNVC: 2

26 Nov 1987

5340-15-103-6461
Handwheel

151036461
24009578A: RNCC: 3 | RNVC: 2

26 Nov 1987

5340-15-103-6513
Staffa Antirimbalzo

151036513
24009009A: RNCC: 3 | RNVC: 2

26 Nov 1987

5340-15-064-2182
Cover

150642182
8723: RNCC: 3 | RNVC: 2

28 Aug 1983

5340-15-009-1540
Supporto Speciale

150091540
4680103: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-138-4799
Tirante Ducato

151384799
5965614: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-118-0411
Manicotto Condotti

151180411
D0484628: RNCC: 3 | RNVC: 2

18 Nov 1994

5340-15-120-6479
Piastrina Metallica

151206479
D0467240: RNCC: 3 | RNVC: 2

1 May 1996

5340-15-068-1876
Disco Di Fermo

150681876
476911: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-15-185-7238
Peso In Acciaio

151857238
PESOINACCIAIO: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-166-4934
Gancio

151664934
9053291: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-189-5370
Fascetta

151895370
211-517-9001: RNCC: 3 | RNVC: 2

26 Feb 2010

5340-15-186-9922
Piastra Di Montaggi

151869922
509424: RNCC: 3 | RNVC: 2
509424: RNCC: 5 | RNVC: 2
509424: RNCC: 5 | RNVC: 2
(241)A1686509424: RNCC: 5 | RNVC: 2
509424: RNCC: 5 | RNVC: 2

19 Jan 2009

5340-15-203-3837
Turnbuckle

152033837
4661: RNCC: 3 | RNVC: 2
(241)AG6224661: RNCC: 5 | RNVC: 2
4030-15-E06-4661: RNCC: 5 | RNVC: 9

16 Jan 2008

5340-15-100-5365
Turnbuckle

151005365
HFD RA141B-SA0/2 IE: RNCC: 3 | RNVC: 2

19 Feb 1987

5340-15-149-3175
Piastrina Contatti

151493175
4886356: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-102-4488
Chiavistello Specia

151024488
263A1521-401: RNCC: 3 | RNVC: 2

30 Aug 1988

5340-15-007-7689
Metal Runner

150077689
764956: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-002-3103
Bumper

150023103
504377569: RNCC: 3 | RNVC: 2

6 Aug 2013

5340-15-195-0152
Blades Protection

151950152
CBD71200P02: RNCC: 3 | RNVC: 2
(241)A3460CBD71200P02: RNCC: 5 | RNVC: 2

16 Feb 2011

5340-15-112-3142
Morsetto Di Fissagg

151123142
42481353: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-166-5246
Filter Box Cover

151665246
83496501: RNCC: 3 | RNVC: 2
83496501: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-201-0412
Coperchio Di Protez

152010412
N632U6011201: RNCC: 3 | RNVC: 2
(241)A0126N632U1011201: RNCC: 5 | RNVC: 9
N632U1011201: RNCC: 5 | RNVC: 9

15 May 2006

5340-15-182-8252
Serratura Per Carre

151828252
Q519070: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-118-4295
Tappo Strumento

151184295
60147833: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-148-4865
Headless Straight Rod

151484865
4796210: RNCC: 3 | RNVC: 2

13 Aug 1999

5340-15-166-4921
Serratura Da Applic

151664921
501716012: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-108-0648
Retaining Ring

151080648
A4UNI7433-75: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-001-8565
Molla Rubinette

150018565
AC100-122: RNCC: 3 | RNVC: 2
AC100-122: RNCC: 5 | RNVC: 9

10 Apr 1974

5340-15-065-3912
Rubber Bumper

150653912
1076-22-126: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-162-7067
Strap Assembly

151627067
27H-291A03000-003-801: RNCC: 3 | RNVC: 2

23 Jan 2002

5340-15-179-6441
Dashpot

151796441
86991577: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-112-7650
Resilient Mount

151127650
90408636001: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-154-2188
Control Rod

151542188
7172763: RNCC: 3 | RNVC: 2

28 Mar 2001

5340-15-166-4773
Bocchettone Filetta

151664773
4617973: RNCC: 3 | RNVC: 2
4617973: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-112-0433
Piastrina Speciale

151120433
275A0302-407: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-193-3931
Piastra Di Montaggi

151933931
504305635: RNCC: 3 | RNVC: 2
(241)A4249504305635: RNCC: 5 | RNVC: 2

11 May 2010

5340-15-201-9125
Resilient Mount

152019125
D1426814: RNCC: 3 | RNVC: 2
WTP805600022: RNCC: 5 | RNVC: 2

11 Jan 2007

5340-15-132-6889
Staffa Elastica

151326889
945018S: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-007-1798
Resilient Mount

150071798
1374257: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-118-0317
Coperchio Inferiore

151180317
D0467450: RNCC: 3 | RNVC: 2

15 Nov 1994

5340-15-063-9234
Fascetta Speciale

150639234
2640-72006: RNCC: 3 | RNVC: 2
2640-72006: RNCC: 5 | RNVC: 9

6 Dec 1982

5340-15-009-6385
Tratto Canalina

150096385
181580G1: RNCC: 3 | RNVC: 2

17 Oct 1980

5340-15-105-6045
Eye Hook

151056045
12.504.974: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-127-2534
Anello

151272534
1-10873-75: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-002-7098
Molla

150027098
1318: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-213-1708
Fascetta Autoblocca

152131708
FS760DWC: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-118-7496
Rigid Surface Mechanical Patch

151187496
9433721: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-179-4760
Manual Control Lever

151794760
098177398: RNCC: 3 | RNVC: 2

22 Jan 2007

5340-15-006-0137
Anchor Strap

150060137
B512TL156: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-135-9473
Tassello Elasti

151359473
4456807: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-049-3515
Tubazione Completa

150493515
7-4411-300-28385-6: RNCC: 3 | RNVC: 2
7-4411-3-00-28385-6: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-007-1801
Resilient Mount

150071801
1368793: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-118-0338
Protezione Attuator

151180338
D0467934: RNCC: 3 | RNVC: 2

15 Nov 1994

5340-15-175-9405
Morsetto Inox Unibl

151759405
MORSETTOAPRIB/RICHIUD.: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-122-5530
Bush Cap

151225530
01TL21213: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-074-4024
Turnbuckle

150744024
1A72UNI2018ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-074-4134
Turnbuckle

150744134
2C72UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-186-8797
Lock

151868797
15753XC4L: RNCC: 3 | RNVC: 2

5 Jan 2009

5340-15-003-4471
Headless Straight Rod

150034471
52060052AG: RNCC: 3 | RNVC: 2
(241)A424952060052AG: RNCC: 5 | RNVC: 2

13 Nov 2013

5340-15-188-4989
Dust And Moisture Seal Protective Cap

151884989
GW440: RNCC: 3 | RNVC: 2

24 Sep 2009

5340-15-195-3881
Turnbuckle

151953881
PASTORINO 188: RNCC: 3 | RNVC: 2
(241)A5964PASTORINO188: RNCC: 5 | RNVC: 2

21 Mar 2011

5340-15-235-4374
Paletto Interno Lun

152354374
305: RNCC: 3 | RNVC: 2
534015E089434: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-149-4919
Disco Divisore

151494919
0552000-12: RNCC: 3 | RNVC: 2

20 Apr 1999

5340-15-215-1176
Lucchetto Monoblocc

152151176
22010-70: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-118-0327
Ghiera Ritegno Valv

151180327
467838: RNCC: 3 | RNVC: 2
D0467838: RNCC: 3 | RNVC: 2

14 Dec 1994

5340-15-118-6577
Arretoir

151186577
73070946: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-009-0732
Manicotto Speciale

150090732
8273225: RNCC: 3 | RNVC: 2

27 Aug 1979

5340-15-166-5049
Rod And Ass

151665049
232A3029403: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-166-5133
Saliscendi Ad Incas

151665133
SLSCINCCM50: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-220-3487
Ruota Con Freno

152203487
150X40: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-001-5727
Angle Bracket

150015727
ECBRAHCLDR01: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-179-9409
Frame

151799409
504205308: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-180-0768
Threaded End Tensioning Tie Rod

151800768
1R 612361: RNCC: 3 | RNVC: 2

28 Jan 2008

5340-15-063-2641
Resilient Mount

150632641
2520448: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-136-2273
Tappo Di Protezione

151362273
WK34011: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-005-9964
Supporto Vetro

150059964
8087125: RNCC: 3 | RNVC: 2
8087125: RNCC: 5 | RNVC: 9

11 Aug 1979

5340-15-149-3421
Resilient Mount

151493421
60158393: RNCC: 3 | RNVC: 2

2 Feb 1999

5340-15-155-4413
Cover

151554413
CBD71046P04: RNCC: 3 | RNVC: 2

25 Mar 2002

5340-15-120-6955
Supporto Attuatore

151206955
D0466809: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-115-6100
Compless Saltarello

151156100
D0470466: RNCC: 3 | RNVC: 2

6 Jun 1994

5340-15-115-7064
Coperchio

151157064
D1401477: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-074-4404
Turnbuckle

150744404
2A8UNI2021AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-139-9277
Collare Serraggio

151399277
I269RA: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-139-4380
Pomello

151394380
4704088: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-201-0413
Coperchio Di Protez

152010413
N632U6012201: RNCC: 3 | RNVC: 2
(241)A0126N632U6012201: RNCC: 5 | RNVC: 2

15 May 2006

5340-15-066-3869
Serbatoio Gasolio

150663869
185BCR005: RNCC: 3 | RNVC: 2
785BCR005: RNCC: 3 | RNVC: 2

18 Jan 1986

5340-15-142-0645
Zinco

151420645
W010731: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-066-4995
Tappo Scarico Speci

150664995
B0024/R18: RNCC: 3 | RNVC: 2

1 Mar 1986

5340-15-063-1011
Semiblecchetto Rite

150631011
SF260-13-144-11: RNCC: 3 | RNVC: 2
SF260-13-144-11: RNCC: 5 | RNVC: 9

23 Nov 1982

5340-15-121-5271
Resilient Mount

151215271
VZA-R-AV-130: RNCC: 3 | RNVC: 2

24 May 1996

5340-15-178-2089
Retaining Clamp

151782089
56-1-22-14A: RNCC: 3 | RNVC: 2

11 Mar 2005

5340-15-122-0632
Protezione Posterio

151220632
238CA340-2TR2: RNCC: 3 | RNVC: 2

23 Apr 1996

5340-15-137-3070
Serratura

151373070
H605SK1177: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-115-6952
Control Rod

151156952
D0470283: RNCC: 3 | RNVC: 2

8 Mar 1994

5340-15-116-8547
Cilindro Fondello

151168547
D1405586: RNCC: 3 | RNVC: 2

8 Apr 1994

5340-15-054-3322
Staffetta Fissaggio

150543322
525068: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-117-4030
Telaio Per Rele Log

151174030
D1405543: RNCC: 3 | RNVC: 2

31 Mar 1994

5340-15-147-5784
Nippel

151475784
98NI924: RNCC: 3 | RNVC: 2

30 Dec 1997

5340-15-121-6640
Nonmetallic Bumper

151216640
800057249: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-133-1949
Clip

151331949
QA00509: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-007-0862
Redancia Speciale

150070862
0-16033: RNCC: 3 | RNVC: 2

29 Jun 1979

5340-15-153-7059
Forcella Testa Di T

151537059
142011134: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-115-7110
Disco Metallico Spe

151157110
D0468870: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-068-0192
Sportello Anteriore

150680192
53.013: RNCC: 2 | RNVC: 2
53.013: RNCC: 2 | RNVC: 2

8 Jul 1986

5340-15-198-7909
Pipe Bracket

151987909
60188350: RNCC: 3 | RNVC: 2

17 Nov 2004

5340-15-184-6229
Ruotino

151846229
NSN534015R517445: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-136-8057
Ammortizzatore

151368057
MV52R7C: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-231-4037
Lucchetto Mm.30

152314037
2101030: RNCC: 3 | RNVC: 2

19 Jul 2007

5340-15-153-9516
Sostegno Elastico

151539516
142067122: RNCC: 2 | RNVC: 3

12 Mar 2001

5340-15-127-3328
Staffetta Fissag.Ca

151273328
742854: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-114-5083
Fascia Di Tenuta

151145083
CF415195: RNCC: 3 | RNVC: 2

16 Jun 1992

5340-15-163-1202
Clip

151631202
1305827080: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-112-0476
Dispositivo Di Supp

151120476
252A1331-401: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-122-2679
Coude Maitre Cylind

151222679
800042345: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-120-6926
Manicotto Filettato

151206926
D0468958: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-149-3765
Shock Absorber

151493765
2300-90128: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-15-089-5014
Piastrina Di Sicure

150895014
72-067-411: RNCC: 3 | RNVC: 2
72-067-411: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-109-3870
Electrical-Me Post

151093870
5137-291-004: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-120-9219
Cerniera

151209219
113A6022-752: RNCC: 3 | RNVC: 2

5 Sep 1995

5340-15-193-1803
Bumper

151931803
357407059: RNCC: 3 | RNVC: 2

20 Apr 2010

5340-15-118-6242
Support

151186242
ANAA2A31: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-200-8971
Resilient Mount

152008971
60176635: RNCC: 3 | RNVC: 2
(241)A424960176635: RNCC: 5 | RNVC: 2

27 Mar 2006

5340-15-189-5633
Disco Al Selenio

151895633
XD75: RNCC: 3 | RNVC: 2

26 Feb 2010

5340-15-138-3083
Fermo

151383083
14183371: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-159-9736
Rubber Bumper

151599736
122603573: RNCC: 3 | RNVC: 2

19 Apr 2004

5340-15-104-8859
Fissaggio Gaffetta

151048859
1367198: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-008-2561
Hook

150082561
101-18-62: RNCC: 3 | RNVC: 2

1 Feb 1982

5340-15-102-1504
Coperchio Accesso

151021504
8246.00.01: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-109-1857
Double Angle Bracket

151091857
60104786: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-189-2761
Electrical Receptacle Connector

151892761
D0600148: RNCC: 3 | RNVC: 2

10 Feb 2010

5340-15-214-6227
Maniglia Ottone

152146227
MANIGLIAOT: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-214-9366
Cassetta Assortimen

152149366
E615100: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-158-6125
Sfera Portante

151586125
122607247: RNCC: 3 | RNVC: 2

10 Mar 2004

5340-15-218-4522
Asta Fermatappeto

152184522
IN-OTTONE: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-141-8482
Anodo

151418482
50574: RNCC: 3 | RNVC: 2
1P 584241: RNCC: 3 | RNVC: 2
584241: RNCC: 3 | RNVC: 2
584241: RNCC: 5 | RNVC: 9
1P 584241: RNCC: 5 | RNVC: 9

9 Jun 1997

5340-15-170-5276
Cover

151705276
301652P1: RNCC: 3 | RNVC: 2

4 Mar 2003

5340-15-134-4995
Staffa

151344995
4517228: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-001-8714
Rondella

150018714
40E6M0SSL: RNCC: 3 | RNVC: 2

18 Jul 2013

5340-15-180-0769
Threaded End Tensioning Tie Rod

151800769
1R 612363: RNCC: 3 | RNVC: 2

28 Jan 2008

5340-15-105-9138
Headless Straight Rod

151059138
8026: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-180-3161
Tubular Fairlead Half

151803161
(241)A4249504086783: RNCC: 3 | RNVC: 2
504086783: RNCC: 3 | RNVC: 2

18 Apr 2008

5340-15-120-6889
Corpo Per Motore Id

151206889
D0471280: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-121-8730
Rubber Bumper

151218730
142520172: RNCC: 3 | RNVC: 2

12 Mar 1996

5340-15-202-7009
Ammortizzatore

152027009
C5B933: RNCC: 3 | RNVC: 2
(241)A0178C5B933: RNCC: 5 | RNVC: 2

21 Jun 2007

5340-15-059-9569
Piastrina Di Fermo

150599569
109-0101-19-1: RNCC: 3 | RNVC: 2

9 Nov 1976

5340-15-050-1539
Fascetta Complesso

150501539
7-4411-200-43467-1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-232-1201
Chiavistello

152321201
A2859500: RNCC: 3 | RNVC: 2
534015E099788: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-159-9639
Resilient Mount

151599639
122606960: RNCC: 3 | RNVC: 2

19 Apr 2004

5340-15-139-4229
Tirante

151394229
4665209: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-068-2306
Anchor Strap

150682306
W012203: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-181-8493
Serratura Da Addoss

151818493
11921: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-196-9910
Padlock

151969910
PN UAS 00037683: RNCC: 3 | RNVC: 2
5340F76032274: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-139-2700
Lucchetto Ad Arco M

151392700
AL 108: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-175-9323
Tappo Riporto Nc357

151759323
M2113: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-063-0711
Dust And Moisture Seal Protective Plug

150630711
8837308: RNCC: 3 | RNVC: 2

15 Jun 1982

5340-15-109-3518
Threaded End Tensioning Tie Rod

151093518
OP-07.11: RNCC: 3 | RNVC: 2

16 Oct 1989

5340-15-105-8269
Tampone Ammortizzat

151058269
753103/11: RNCC: 3 | RNVC: 2
753103/11: RNCC: 5 | RNVC: 9

30 May 1989

5340-15-107-7763
Mensola Speciale

151077763
109-0504-39-1: RNCC: 3 | RNVC: 2

29 Jun 1988

5340-15-156-3686
Inlet Gbx Plug

151563686
(241)A3460CBD71334G01: RNCC: 3 | RNVC: 2
CBD71334G01: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-198-4309
Access Door

151984309
122606015: RNCC: 3 | RNVC: 2

27 Sep 2004

5340-15-068-1951
Gruppo Staffaggio

150681951
644634: RNCC: 3 | RNVC: 2
644634: RNCC: 5 | RNVC: 9

27 Feb 1986

5340-15-127-3911
Anello Elastico Rit

151273911
341520: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-103-8054
Anchor Strap

151038054
9013400: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-115-7042
Coperchietto

151157042
D0468377: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-118-4116
Cuffia Riparo Fari

151184116
60163692: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-204-1900
Scatola Laterale

152041900
04.18.82.23.010: RNCC: 3 | RNVC: 2
(241)S591404.18.82.23.010: RNCC: 5 | RNVC: 2

21 Sep 2011

5340-15-126-4674
Molla

151264674
XS1652: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-119-0166
Dust And Moisture Seal Protective Cap-Plug

151190166
70647122: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-065-1350
Snap Hook

150651350
SMB 0012: RNCC: 3 | RNVC: 2

13 Sep 1984

5340-15-156-0330
Spina Fissaggio Con

151560330
1P 147946: RNCC: 3 | RNVC: 2
1P 147946: RNCC: 5 | RNVC: 9

11 Nov 2002

5340-15-003-9182
Stand Base

150039182
182709432: RNCC: 3 | RNVC: 2
(241)A0199182709432: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-116-2719
Centraggio Fori

151162719
190521236: RNCC: 3 | RNVC: 2

15 Apr 1993

5340-15-137-9058
Snap Hook

151379058
120.099/36: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-206-0117
Angle Bracket

152060117
109-0312-96-107: RNCC: 3 | RNVC: 2

2 May 2012

5340-15-178-5328
Control Rod Extension

151785328
R165-02: RNCC: 3 | RNVC: 2
R165-02: RNCC: 5 | RNVC: 9

1 Jul 2005

5340-15-151-6738
Riparo Calore - Com

151516738
60138628: RNCC: 3 | RNVC: 2

26 Jun 2000

5340-15-210-2638
Curva A 90

152102638
CIR32: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-105-8944
Tirante A Teste Fil

151058944
1366414: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-127-6403
Squadretta Albero F

151276403
735069: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-159-9741
Rubber Bumper

151599741
122607459: RNCC: 3 | RNVC: 2

19 Apr 2004

5340-15-102-8061
Chiavistello Specia

151028061
263A1730-401: RNCC: 3 | RNVC: 2

27 Oct 1988

5340-15-104-4342
Testa Tira Forcella

151044342
15322: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-185-2110
Clamp

151852110
C724: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-149-2313
Potentiomete Clamp

151492313
128008: RNCC: 3 | RNVC: 2

23 Dec 1998

5340-15-198-9686
Cilindro Catenaccio

151989686
21505281: RNCC: 3 | RNVC: 2
(241)A486721505281: RNCC: 5 | RNVC: 2

14 Dec 2004

5340-15-222-1328
Riscontro Per Chius

152221328
04.0389: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-001-8811
Anello Freno

150018811
11010392: RNCC: 3 | RNVC: 2

18 Jul 2013

5340-15-068-1950
Gruppo Staffaggio

150681950
644633: RNCC: 3 | RNVC: 2
644633: RNCC: 5 | RNVC: 9

27 Feb 1986

5340-15-181-0556
Paraurti Non Metall

151810556
D3PR2383: RNCC: 3 | RNVC: 2
(241)AD003D3PR2383: RNCC: 5 | RNVC: 2

10 Oct 2008

5340-15-206-2976
Nose Locking Handle

152062976
A80028210-01: RNCC: 3 | RNVC: 2

1 Jun 2012

5340-15-163-2378
Clip

151632378
17764491: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-065-9587
Eye Hook

150659587
65340100: RNCC: 3 | RNVC: 2

29 Oct 1982

5340-15-166-4983
Plug

151664983
263A1017001: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-154-5861
Handwheel

151545861
123605625: RNCC: 2 | RNVC: 3

26 Jul 2001

5340-15-063-9631
Padlock

150639631
4215: RNCC: 3 | RNVC: 2

2 Jan 1980

5340-15-185-6119
Chiudi Cancelleto P

151856119
CHIUDICAN: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-115-5417
Supporto Sinistro M

151155417
D0469596: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-007-0764
Fascetta Speciale

150070764
0-03277: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-207-7994
Manual Control Lever

152077994
2000895V0100: RNCC: 3 | RNVC: 2
(241)A08102000895V0100: RNCC: 5 | RNVC: 2

20 Nov 2012

5340-15-139-3561
Staffa

151393561
3416193: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-122-1532
Control Rod

151221532
D0491478: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-176-3946
Tassello In Nylon C

151763946
SB9/5: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-122-1028
Dust And Moisture Seal Protective Plug

151221028
D0591886: RNCC: 3 | RNVC: 2

27 Sep 1996

5340-15-189-2493
Dust And Moisture Seal Protective Cover

151892493
PROP105: RNCC: 3 | RNVC: 2
336621340067: RNCC: 5 | RNVC: 2

10 Feb 2010

5340-15-111-5909
Holder

151115909
A05778-01-20: RNCC: 3 | RNVC: 2
A05778-01-20: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-220-0483
Turning Vanes Centr

152200483
S1-95: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-002-9191
Access Door Locking Ring

150029191
GUARN0012: RNCC: 3 | RNVC: 2
(241)A4114GUARN0012: RNCC: 5 | RNVC: 2

17 Oct 2013

5340-15-109-1816
Rubber Bumper

151091816
60103363: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-204-1901
Suppoto Alimentator

152041901
195550106: RNCC: 3 | RNVC: 2
(241)A0199195550106: RNCC: 5 | RNVC: 2

21 Sep 2011

5340-15-202-7829
Protect Blank Panel

152027829
N651U3134201: RNCC: 3 | RNVC: 2
(241)A0126N651U3134201: RNCC: 5 | RNVC: 2

10 Jul 2007

5340-15-118-0511
Supporto Per Cavo

151180511
D0488478: RNCC: 3 | RNVC: 2

5 Dec 1994

5340-15-057-3871
Dispositivo Bloccag

150573871
204-6900-51-1: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-166-5122
Ass. Supporto Destr

151665122
2120609186: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-218-2281
Scovolo Abrasivo Mm

152182281
1319SA-MM25: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-066-0210
Contropiastra Serra

150660210
FM11: RNCC: 3 | RNVC: 2

28 Jan 1986

5340-15-158-6515
Protezione

151586515
162511130: RNCC: 3 | RNVC: 2

12 Mar 2004

5340-15-166-5083
Protezione

151665083
N0R38512: RNCC: 1 | RNVC: 2
N0R38512: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-179-2419
Support

151792419
21572030: RNCC: 3 | RNVC: 2

10 Aug 2006

5340-15-175-8650
Pietrina

151758650
032078: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-063-6237
Cover Plate Access

150636237
4735449: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-170-7492
Coupling Hub Flies

151707492
6102335601: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-139-9672
Spazzola Circolare

151399672
S005: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-139-3736
Fermaglio

151393736
42036960: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-121-9021
Cerniera Superiore

151219021
142502948: RNCC: 3 | RNVC: 2

19 Mar 1996

5340-15-118-6827
Valve Guide

151186827
1CMLM0007: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-112-0304
Chiavistello Specia

151120304
641C: RNCC: 3 | RNVC: 2

19 Feb 1991

5340-15-163-3026
Flange

151633026
2750.320: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-166-4862
Lucchetto Cisa

151664862
2855085: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-163-1625
Clip

151631625
1314809080: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-060-6616
Cerniera Inferiore

150606616
1971TAV69-22PART2SINISTRA: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-182-4084
Cerniera Perno A Sf

151824084
6X60LUNG: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-219-8758
Tenditori A 2 Occhi

152198758
10: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-004-1374
Dust And Moisture Seal Protective Cap

150041374
4257994: RNCC: 3 | RNVC: 2
4257994: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-118-9496
Dust And Moisture Seal Protective Cap

151189496
75204368: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-207-8371
Multiple Angle Bracket

152078371
613R.012: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-120-0868
Double Angle Bracket

151200868
60165720: RNCC: 3 | RNVC: 2

19 Dec 1994

5340-15-120-3492
Double Angle Bracket

151203492
60176908: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-151-4637
Headless Straight Rod

151514637
NAMS0170400: RNCC: 3 | RNVC: 2

29 May 2000

5340-15-009-5820
Helical Compression Spring Seat

150095820
75451411: RNCC: 3 | RNVC: 2
9981270: RNCC: 5 | RNVC: 2
75451411: RNCC: 5 | RNVC: 9

22 Sep 1979

5340-15-202-4314
Padlock

152024314
105.3277: RNCC: 3 | RNVC: 2
(241)A3648105.3277: RNCC: 5 | RNVC: 2

20 Mar 2007

5340-15-166-4864
Rubber Whl 100 Dia

151664864
2350420: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-052-2291
Semicollare

150522291
740-12-63: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-203-8806
Spingirullo Per Tap

152038806
SPINGIRULLO: RNCC: 3 | RNVC: 2
(241)AD445SPINGIRULLO: RNCC: 5 | RNVC: 2

13 Jul 2011

5340-15-199-8045
Anello

151998045
D1416741: RNCC: 3 | RNVC: 2
(241)A0461D1416741: RNCC: 5 | RNVC: 2

7 Jun 2005

5340-15-216-4212
Lucchetti Speciali

152164212
ART375: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-148-9149
Manicotto Speciale

151489149
2211-0028-001: RNCC: 3 | RNVC: 2

29 Oct 1998

5340-15-113-1357
Threaded End Tensioning Tie Rod

151131357
234A0071-001: RNCC: 3 | RNVC: 2

7 Oct 1990

5340-15-148-7508
Assieme Sede

151487508
2104-0048-001: RNCC: 3 | RNVC: 2

30 Sep 1998

5340-15-127-7637
Molla

151277637
9902657: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-205-1986
Low Pressure Cover

152051986
CBD71462G01: RNCC: 3 | RNVC: 2
(241)A3460CBD71462G01: RNCC: 5 | RNVC: 2

24 Feb 2012

5340-15-231-8570
Collare Fissaggio

152318570
12176190: RNCC: 3 | RNVC: 2
534015E082873: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-188-0917
Tubebundle

151880917
81520026.00: RNCC: 3 | RNVC: 2

7 Jul 2009

5340-15-118-0492
Manicotto Serracavo

151180492
D0488382: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-101-9799
Giunto Di Collegame

151019799
53778: RNCC: 3 | RNVC: 2
53778: RNCC: 3 | RNVC: 2

31 Mar 1988

5340-15-118-0069
Helical Compression Spring Seat

151180069
1P 548217: RNCC: 3 | RNVC: 2
1P 548217: RNCC: 5 | RNVC: 9

28 Jan 1995

5340-15-218-2530
Cerniera Quadra 70M

152182530
121-70MM: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-148-7493
Assieme Sede Bassa

151487493
2104-0022-001: RNCC: 3 | RNVC: 2

30 Sep 1998

5340-15-113-4836
Cernierainferiore

151134836
312A6466-001: RNCC: 3 | RNVC: 2

29 Jun 1991

5340-15-009-9004
Cover Plate Access

150099004
1236-31-101: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-113-2477
Staffacomplessivo

151132477
344A5027-403: RNCC: 3 | RNVC: 2

11 Apr 1991

5340-15-110-7282
Extension Drawer Slide

151107282
MC700902: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-109-8853
Headless Grooved Rod

151098853
D0467477: RNCC: 3 | RNVC: 2
467477: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-122-6717
Fascetta

151226717
41C028P001: RNCC: 3 | RNVC: 2

27 Sep 1996

5340-15-176-6056
Resina Gr.230

151766056
7410142X: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-150-9237
Piastra Per Passagg

151509237
992110600M: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-15-107-4428
Threaded End Tensioning Tie Rod

151074428
530102: RNCC: 2 | RNVC: 2
1P 530102: RNCC: 3 | RNVC: 2
530102: RNCC: 5 | RNVC: 9
1P 530102: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-112-2533
Assiemea

151122533
377A1658-401: RNCC: 3 | RNVC: 2

11 Mar 1991

5340-15-180-3574
Paracolpo In Strisc

151803574
(241)ADA53BP276: RNCC: 3 | RNVC: 2
BP276: RNCC: 3 | RNVC: 2

23 Apr 2008

5340-15-187-1255
Dust And Moisture Seal Protective Plug

151871255
A196A312B: RNCC: 3 | RNVC: 2
(241)A0126A196A312B: RNCC: 5 | RNVC: 2

19 Feb 2009

5340-15-195-9169
Dust And Moisture Seal Protective Plug

151959169
TPU35: RNCC: 3 | RNVC: 2
(241)A0019TPU35: RNCC: 5 | RNVC: 2

25 May 2011

5340-15-231-1703
Tappo

152311703
180365380: RNCC: 3 | RNVC: 2
534015E095654: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-166-5041
Supporto

151665041
AC12995131: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-103-6830
Double Angle Bracket

151036830
24009518A: RNCC: 3 | RNVC: 2

26 Nov 1987

5340-15-116-2773
Tappo Spechiale

151162773
190518169: RNCC: 3 | RNVC: 2

15 Apr 1993

5340-15-053-7318
Staffa

150537318
631999: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-104-8851
Fissaggio Gaffetta

151048851
873346: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-176-3894
Ancorante Tam Con O

151763894
8767: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-222-2424
Clamp

152222424
LN6491B18: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-054-3064
Staffa

150543064
945150F: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-153-6982
Tappo Di Protezione

151536982
121106163: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-103-0990
Electrical-Me Post

151030990
013.10.693: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-001-5505
Stand Base

150015505
182719593: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-15-107-2570
Electrical-Me Post

151072570
5201-202-04: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-178-9962
Plate

151789962
RS 407 256: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-174-6592
Rubber Cap

151746592
9909505006: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-15-122-7049
Supporto

151227049
HK2018RS: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-103-8538
Staffa

151038538
8588966: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-002-3027
Dust And Moisture Seal Protective Cap

150023027
500405427: RNCC: 3 | RNVC: 2

5 Aug 2013

5340-15-177-4248
Manual Control Lever

151774248
048834: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-219-8019
Capicorda Isolati I

152198019
11133: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-151-7088
Staffa

151517088
0-177618: RNCC: 3 | RNVC: 2

3 Jul 2000

5340-15-122-1029
Dust And Moisture Seal Protective Plug

151221029
D0591885: RNCC: 3 | RNVC: 2

27 Sep 1996

5340-15-212-6882
Graffetta Con Chiod

152126882
GRAFFETTAMM16: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-213-7705
Placca Metallica 'N

152137705
PLACCANR7: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-178-1056
Rubber Holder

151781056
ART.072301332: RNCC: 3 | RNVC: 2

14 Feb 2005

5340-15-155-9644
Gancio A Staffa

151559644
99463366: RNCC: 3 | RNVC: 2
A450013-003: RNCC: 5 | RNVC: 2

17 Oct 2002

5340-15-064-4386
Dust And Moisture Seal Protective Cap

150644386
1055-04-333: RNCC: 3 | RNVC: 2

27 Oct 1983

5340-15-118-1317
Flancia Sportello

151181317
65150-101: RNCC: 3 | RNVC: 2
65150-101A00: RNCC: 5 | RNVC: 2

23 Mar 1994

5340-15-166-4744
Minimess Screw Coup

151664744
2106011810: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-213-7606
Ruota Per Carrello

152137606
6936198: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-156-3390
Half Rings

151563390
(241)A3460CBD71243P01: RNCC: 3 | RNVC: 2
CBD71243P01: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-15-002-1437
Bumper

150021437
42566940: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-055-6716
Tassello Guida Tira

150556716
530073: RNCC: 3 | RNVC: 2

10 Apr 1972

5340-15-001-3396
Angle Bracket

150013396
504382231: RNCC: 3 | RNVC: 2

17 Jun 2013

5340-15-193-1580
Angle Bracket

151931580
504147889: RNCC: 3 | RNVC: 2
(241)A4249504147889: RNCC: 5 | RNVC: 2

20 Apr 2010

5340-15-127-5283
Piastrina Distanz.T

151275283
874493: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-122-2621
Boite A Clapet

151222621
800034173: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-056-3392
Ammortizzatore

150563392
88110511: RNCC: 3 | RNVC: 2
1142010004: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-150-3908
Dust And Moisture Seal Protective Cap

151503908
M174: RNCC: 3 | RNVC: 2

2 Dec 1999

5340-15-194-1550
Braccio Per Pallet

151941550
75510: RNCC: 3 | RNVC: 2
(241)AJ63275510: RNCC: 5 | RNVC: 2

24 Sep 2010

5340-15-163-2501
Plug

151632501
16992740: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-180-8802
Asta

151808802
178919166: RNCC: 3 | RNVC: 2
(241)A0199178919166: RNCC: 5 | RNVC: 2

4 Aug 2008

5340-15-134-4965
Taccoletto

151344965
938779J: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-122-2108
Plaque Aiguille

151222108
800036682: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-005-8476
Semifascetta Specia

150058476
39A2003-64: RNCC: 3 | RNVC: 2

2 Jan 1979

5340-15-105-8939
Tirante A Teste Fil

151058939
002.7688.0: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-151-7319
Piastrina

151517319
0-178392: RNCC: 3 | RNVC: 2

4 Jul 2000

5340-15-170-8868
Scharnier 2

151708868
TE301511: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-074-4138
Turnbuckle

150744138
2C8UNI20180T60-2012AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-118-1135
Resilient Mount

151181135
1P 575698: RNCC: 3 | RNVC: 2
1P 575698: RNCC: 5 | RNVC: 9

30 Jan 1995

5340-15-060-8236
Rim Clen Clamp (1)

150608236
000200167700: RNCC: 5 | RNVC: 2
000200167700: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-203-4499
Hatch Actua Adapter

152034499
N523G5461201: RNCC: 3 | RNVC: 2
(241)A0126N523G5461201: RNCC: 5 | RNVC: 2

3 Feb 2008

5340-15-138-3084
Fermaglio

151383084
14186880: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-121-5515
Boccola Fermafilo

151215515
129-0041-39-103: RNCC: 3 | RNVC: 2

16 Jan 1996

5340-15-109-1229
Rubber Bumper

151091229
38557660: RNCC: 3 | RNVC: 2

30 Apr 1988

5340-15-179-2030
Governor

151792030
76030851: RNCC: 3 | RNVC: 2

18 Jul 2006

5340-15-107-8584
Tassello Elastico

151078584
4757122: RNCC: 3 | RNVC: 2

27 Jun 1997

5340-15-104-8880
Fissaggio Gaffetta

151048880
10441990: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-209-4757
Nastro Per Levigatr

152094757
NASTROXLEVIGATRICE: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-120-6951
Indice Segnalazione

151206951
D0467040: RNCC: 3 | RNVC: 2

1 May 1996

5340-15-009-5823
Helical Compression Spring Seat

150095823
75359511: RNCC: 3 | RNVC: 2
9921706: RNCC: 5 | RNVC: 2
75359511: RNCC: 5 | RNVC: 9

22 Sep 1979

5340-15-074-4443
Turnbuckle

150744443
1C16UNI2021A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-125-6688
Clamp

151256688
U139008: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-155-0925
Nut And Bo Retainer

151550925
J57150530-005: RNCC: 3 | RNVC: 2

17 Jan 2002

5340-15-174-7622
5Mm Nastro Rame 11

151747622
55210-43/082: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-145-2558
Planet Gear

151452558
541-33-1270: RNCC: 3 | RNVC: 2

23 Jun 1997

5340-15-006-0475
Piastra

150060475
811-01-75: RNCC: 3 | RNVC: 2

23 Aug 1979

5340-15-157-9841
Hinge Half

151579841
J94345422-001: RNCC: 3 | RNVC: 2

14 Dec 2003

5340-15-182-5398
Tassello Elastico

151825398
46781213: RNCC: 3 | RNVC: 2
(241)A293046781213: RNCC: 5 | RNVC: 2

30 Dec 2008

5340-15-112-0445
Dispositivo Di Supp

151120445
265A1057-401: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-116-4098
Headless Straight Rod

151164098
145502160: RNCC: 3 | RNVC: 2

18 May 1993

5340-15-074-4430
Turnbuckle

150744430
2B12UNI2021AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-230-4641
Manicotto Abrasivo

152304641
PCH21L: RNCC: 3 | RNVC: 2
534015E064965: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-207-6245
Dispositivo Di Rego

152076245
1N180120091: RNCC: 3 | RNVC: 2
(241)A23091N180120091: RNCC: 5 | RNVC: 2

5 Nov 2012

5340-15-074-4435
Turnbuckle

150744435
1C30UNI2021A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-059-2281
Key Blank

150592281
NP17USN: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-137-1251
Inserto

151371251
69260: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-120-6713
Control Rod

151206713
D0491538: RNCC: 3 | RNVC: 2

28 Jun 1996

5340-15-187-3498
Tampone Ammortizzat

151873498
041191: RNCC: 3 | RNVC: 2
(241)A3593041191: RNCC: 5 | RNVC: 2

17 Mar 2009

5340-15-154-1527
Eccentric H Insert

151541527
NN71166P01: RNCC: 3 | RNVC: 2

27 Mar 2001

5340-15-116-1475
Dust And Moisture Seal Protective Cap-Plug

151161475
830062: RNCC: 3 | RNVC: 2

17 Mar 1993

5340-15-119-2474
Double Angle Bracket

151192474
D1409238: RNCC: 3 | RNVC: 2

2 May 1995

5340-15-206-4772
Hinge

152064772
C9022-00: RNCC: 3 | RNVC: 2

13 Jun 2012

5340-15-206-5667
Plug

152065667
99R01094798O: RNCC: 3 | RNVC: 2
(241)A312199R01094798O: RNCC: 5 | RNVC: 2

26 Jun 2012

5340-15-200-5855
Riparo

152005855
79074398: RNCC: 3 | RNVC: 2
(241)AD75179074398: RNCC: 5 | RNVC: 2
79074398: RNCC: 5 | RNVC: 2

1 Feb 2006

5340-15-122-5489
Pivot

151225489
01TL21204: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-181-1007
Sportello Accesso

151811007
H0206D001: RNCC: 3 | RNVC: 2
(241)A1795H0206D001: RNCC: 5 | RNVC: 2

22 Oct 2008

5340-15-153-7431
Rubber Bumper

151537431
142062107: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-122-2841
Crochet Passage

151222841
800062561: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-166-4859
Cerniera Maschio In

151664859
035420029: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-137-2827
Squadretta

151372827
MS9102-2: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-104-8894
Fissaggio Gaffetta

151048894
12.506.829: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-153-0409
Handwheel

151530409
15900A114850: RNCC: 5 | RNVC: 2
15900A114850: RNCC: 5 | RNVC: 9

15 Nov 2000

5340-15-074-4243
Turnbuckle

150744243
1D30UNI2019A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-200-1934
Control Rod

152001934
157620119: RNCC: 3 | RNVC: 2
(241)A0199157620119: RNCC: 5 | RNVC: 2

24 Oct 2005

5340-15-134-6031
Staffa Cofano Motor

151346031
5935429: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-155-4945
Upper Plate

151554945
CBD71130P05: RNCC: 3 | RNVC: 2

28 Mar 2002

5340-15-217-0038
Serratura Premiapri

152170038
MERONI13: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-152-5125
Resilient Mount

151525125
60136992: RNCC: 3 | RNVC: 2

19 Sep 2000

5340-15-152-5044
Bracket

151525044
NN77787P02: RNCC: 3 | RNVC: 2

18 Sep 2000

5340-15-142-9054
Nut And Bolt Locking Plate

151429054
476674: RNCC: 3 | RNVC: 2

22 Oct 1996

5340-15-170-3485
Support

151703485
206-001-520-7: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-064-3781
Cover Plate Access

150643781
1355-19-101: RNCC: 3 | RNVC: 2

30 Jan 1984

5340-15-186-7662
Bumper

151867662
0000041005414: RNCC: 3 | RNVC: 2
41005414: RNCC: 3 | RNVC: 2

5 Jan 2009

5340-15-103-0931
Resilient Mount

151030931
DE013.09.904: RNCC: 3 | RNVC: 2
(241)A5015DE013.09.904: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-074-4441
Turnbuckle

150744441
1C10UNI2021A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-209-6444
Tasselli Fischer Ny

152096444
FH0210: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-074-4242
Turnbuckle

150744242
1D27UNI2019A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-121-7477
Double Angle Bracket

151217477
850612: RNCC: 3 | RNVC: 2

14 Feb 1996

5340-15-127-5070
Piastrina

151275070
869963: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-177-6811
Spheric Terminal

151776811
00082533: RNCC: 3 | RNVC: 2

4 Jun 2004

5340-15-074-4314
Turnbuckle

150744314
1B39UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-135-8457
Tappo In Sughero

151358457
LLLS731TYIGRACL1N16: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-221-4643
Turnbuckle

152214643
EX4030RI7420268: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-101-7814
Fascetta Speciale

151017814
SC32673.25: RNCC: 3 | RNVC: 2

21 Jul 1987

5340-15-166-5019
Lh Hinge Half

151665019
113A6012753: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-127-3358
Squadretta Anter.Tu

151273358
743235: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-054-2974
Key Blank

150542974
NP17F: RNCC: 2 | RNVC: 1

27 Oct 1981

5340-15-008-0577
Helical Compression Spring Retainer

150080577
990741: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-101-8931
Dust And Moisture Seal Protective Cap

151018931
1P519480: RNCC: 3 | RNVC: 2
1P519480: RNCC: 5 | RNVC: 9

25 Nov 1992

5340-15-020-2084
Ponticello Ancoragg

150202084
01-231Q41: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-207-7243
Webbing Strap

152077243
1027736: RNCC: 3 | RNVC: 2

14 Nov 2012

5340-15-207-8648
Dust And Moisture Seal Protective Cap

152078648
8851534: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-144-8438
Anello Metallico

151448438
88052-1040: RNCC: 3 | RNVC: 2

24 Jan 1997

5340-15-006-9908
Headless Straight Rod

150069908
MR4841117: RNCC: 3 | RNVC: 2

7 Jan 2014

5340-15-005-5327
Access Cover Plate

150055327
1026-11-311: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-002-1461
Bumper

150021461
42566963: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-117-0026
Coupelle Sur Distri

151170026
79042386: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-159-9734
Rubber Bumper

151599734
122603567: RNCC: 3 | RNVC: 2

19 Apr 2004

5340-15-114-7942
Supporto

151147942
9160.00.04: RNCC: 3 | RNVC: 2

12 May 1993

5340-15-179-9410
Frame

151799410
504205309: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-166-5064
Retainer

151665064
20525001: RNCC: 3 | RNVC: 2
20525001: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-149-7710
Manual Control Lever

151497710
36120: RNCC: 3 | RNVC: 2

22 Jun 1999

5340-15-125-5536
Terminale Lamellare

151255536
1301400: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-152-4743
Bracket

151524743
NN77719P02: RNCC: 3 | RNVC: 2

18 Sep 2000

5340-15-107-5707
Staffa Di Chiusura

151075707
DE013.12.801: RNCC: 3 | RNVC: 2

5 Jan 1989

5340-15-156-2057
Flange

151562057
(241)A3460CBD71205P01: RNCC: 3 | RNVC: 2
CBD71205P01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-108-6438
Tassello Elastico

151086438
93917961: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-155-4857
Ext Protection Assy

151554857
CBD71187G01: RNCC: 3 | RNVC: 2

27 Mar 2002

5340-15-155-4881
Lpt Blade Base Assy

151554881
CBD71190G01: RNCC: 3 | RNVC: 2

27 Mar 2002

5340-15-150-1369
Handwiheel

151501369
40603100: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-163-1361
Clip

151631361
7534256: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-134-5528
Staffa Inferiore

151345528
4380816: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-129-0477
Circlip

151290477
6T3623N9: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-127-4953
Staffetta Per Tubo

151274953
861232: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-120-3457
Dust And Moisture Seal Protective Cap-Plug

151203457
60147027: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-116-4885
Double Angle Bracket

151164885
60169077: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-155-8265
Multiple Angle Bracket

151558265
4112T88G01: RNCC: 3 | RNVC: 2
4112T88G01: RNCC: 3 | RNVC: 2

11 Jul 2002

5340-15-057-7507
Nut And Bolt Locking Plate

150577507
1376-08-128: RNCC: 3 | RNVC: 2
137608128: RNCC: 5 | RNVC: 2

31 Dec 1975

5340-15-112-1142
Sostegnoe

151121142
H30-127-37-44-10MM: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-189-5349
Fascetta

151895349
STSTG001-14-06: RNCC: 3 | RNVC: 2

26 Feb 2010

5340-15-139-7681
Cinghia Fissaggio

151397681
0042409: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-111-5766
Lift Connector

151115766
01TL20852: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-101-7837
Fascetta Speciale

151017837
SC32674.79S: RNCC: 3 | RNVC: 2

21 Jul 1987

5340-15-180-6905
Corrosion Preventive Anode

151806905
D50S30M16X20: RNCC: 3 | RNVC: 2

4 Jul 2008

5340-15-188-2846
Manual Control Lever

151882846
76048637: RNCC: 3 | RNVC: 2

1 Sep 2009

5340-15-148-6613
Stand Base (1)

151486613
190540119: RNCC: 3 | RNVC: 2

17 Sep 1998

Load More Results