What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 4 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 4 of 72

5340-15-106-7551
Angle Bracket

151067551
761260: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-149-3120
Angle Bracket

151493120
4885962: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-073-8757
Rim Lock

150738757
39A90X60: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-108-7071
Loop Clamp

151087071
12176990: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-189-3782
Retaining Band

151893782
71048-7: RNCC: 3 | RNVC: 2
(241)AJ12071048-7: RNCC: 5 | RNVC: 2

17 Feb 2010

5340-15-121-9314
Mounting Bracket

151219314
1Z 596678: RNCC: 3 | RNVC: 2
1Z 596678: RNCC: 5 | RNVC: 9

28 Aug 1996

5340-15-178-7493
Mounting Bracket

151787493
057456: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-152-9514
Threaded Rod End

151529514
48050000067/8: RNCC: 3 | RNVC: 2

9 Nov 2000

5340-15-204-0294
Mounting Bracket

152040294
9458096: RNCC: 3 | RNVC: 2

19 Aug 2011

5340-15-118-3407
Loop Clamp

151183407
60141538: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-063-6576
Support Hook

150636576
P882746-001: RNCC: 3 | RNVC: 2

20 Apr 1983

5340-15-205-4255
Mounting Bracket

152054255
SMMB2A: RNCC: 3 | RNVC: 2
(241)AB555SMMB2A: RNCC: 5 | RNVC: 2

8 Mar 2012

5340-15-206-5119
Mounting Bracket

152065119
109-0717-98-141: RNCC: 3 | RNVC: 2

20 Jun 2012

5340-15-195-8170
Mounting Bracket

151958170
150902: RNCC: 3 | RNVC: 2
(241)AJ611150902: RNCC: 5 | RNVC: 2

16 May 2011

5340-15-162-2625
Flush Lock

151622625
80-650-04 60MM: RNCC: 3 | RNVC: 2

17 May 2001

5340-15-101-9980
Angle Bracket

151019980
109-0616-05-33: RNCC: 3 | RNVC: 2

16 Nov 1987

5340-15-120-3531
Loop Clamp

151203531
17315190: RNCC: 3 | RNVC: 2
0-142219: RNCC: 4 | RNVC: 1
17315190: RNCC: 4 | RNVC: 1
1PA39630-142219: RNCC: 5 | RNVC: 2

3 Apr 1995

5340-15-153-5259
Filler Opening Cap

151535259
442000000/72/06: RNCC: 3 | RNVC: 2
ICF 20: RNCC: 5 | RNVC: 2

7 Feb 2001

5340-15-111-9683
Butt Hinge

151119683
700A2603-401: RNCC: 3 | RNVC: 2

30 Jan 1991

5340-15-117-5087
Access Door Hinge

151175087
206-1006-30-6: RNCC: 3 | RNVC: 2

2 Nov 1993

5340-15-112-6300
Screw Thread Insert

151126300
1376-07-164: RNCC: 3 | RNVC: 2
137607164: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-152-0953
Detent Plunger

151520953
2201-0018-001: RNCC: 3 | RNVC: 2

4 Aug 2000

5340-15-073-5630
Flush Lock

150735630
19890-045: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-008-0430
Angle Bracket

150080430
1236-19-110: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-174-8876
Angle Bracket

151748876
TF0000000033: RNCC: 3 | RNVC: 2

17 Oct 2003

5340-15-009-2509
Retaining Strap

150092509
P882755: RNCC: 3 | RNVC: 2

23 Aug 1980

5340-15-119-9100
Angle Bracket

151199100
142032349: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-113-1447
Mending Plate

151131447
275A0316-001: RNCC: 3 | RNVC: 2

7 Oct 1990

5340-15-188-6200
Access Cover

151886200
99463363: RNCC: 3 | RNVC: 2
Z04.01.05.12: RNCC: 5 | RNVC: 2
5340PL0956030: RNCC: 6 | RNVC: 9

15 Oct 2009

5340-15-073-5626
Flush Lock

150735626
19890-025: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-055-7689
Bow Handle

150557689
50040724: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-116-4844
Clamping Catch

151164844
60151165: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-121-4602
Butt Hinge Leaf

151214602
212-7600-44-9: RNCC: 3 | RNVC: 2

13 Oct 1997

5340-15-178-4247
Access Cover

151784247
RAF-5056/01: RNCC: 3 | RNVC: 2

31 May 2005

5340-15-121-7493
Spring Holder

151217493
8520005: RNCC: 3 | RNVC: 2

14 Feb 1996

5340-15-122-2799
Loop Clamp

151222799
800056462: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-045-3469
Loop Clamp

150453469
714-12-23: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-007-5220
Mending Plate

150075220
1239-01-153: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-059-7401
Screw Thread Insert

150597401
1180-20609: RNCC: 3 | RNVC: 2

6 Jul 2000

5340-15-104-4351
Expansion Plug

151044351
14328901: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-108-2934
Angle Bracket

151082934
60134947: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-003-1449
Angle Bracket

150031449
98164642: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-152-4879
Access Cover

151524879
60128903: RNCC: 3 | RNVC: 2

19 Sep 2000

5340-15-100-8284
Retaining Strap

151008284
21610096A: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-059-3438
Plain Solid Disk

150593438
1127-04-103: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-118-4506
Angle Bracket

151184506
60147499: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-118-4460
Mending Plate

151184460
60152556: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-100-2918
Rod End Clevis

151002918
39X576-12-04-02: RNCC: 3 | RNVC: 2

20 Jan 1987

5340-15-054-8757
Handle Grip

150548757
32-03-384: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-199-4648
Block Clamp

151994648
A464A002A: RNCC: 3 | RNVC: 2
(241)A0126A464A002A: RNCC: 5 | RNVC: 2

12 Apr 2005

5340-15-118-4035
Angle Bracket

151184035
60165744: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-004-4341
Rod End Clevis

150044341
63107-101: RNCC: 3 | RNVC: 2

21 Mar 1978

5340-15-045-3165
Rod End Clevis

150453165
510-12-25-01: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-119-3867
Bridge Clamp

151193867
18822013: RNCC: 3 | RNVC: 2
8197567: RNCC: 5 | RNVC: 2

25 Jul 1994

5340-15-193-3538
Mortise Lock

151933538
510320605: RNCC: 3 | RNVC: 2

7 May 2010

5340-15-168-8436
Coat And Hat Hook

151688436
C13000396: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-110-0308
Retaining Strap

151100308
22668-101A00: RNCC: 3 | RNVC: 2
22668-101: RNCC: 5 | RNVC: 2

15 Mar 1990

5340-15-108-3104
Loop Clamp

151083104
10115500: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-005-2205
Hand Crank Arm

150052205
565072213000: RNCC: 2 | RNVC: 3
5072213: RNCC: 3 | RNVC: 2

16 Sep 1980

5340-15-177-3658
Loop Clamp

151773658
012453AA: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-204-4619
Mounting Bracket

152044619
504148699: RNCC: 3 | RNVC: 2

7 Nov 2011

5340-15-004-3875
Rod End Clevis

150043875
0-01324: RNCC: 3 | RNVC: 2

7 Sep 1978

5340-15-162-6387
Loop Clamp

151626387
4722140: RNCC: 3 | RNVC: 2

7 Dec 2001

5340-15-149-9904
Mounting Bracket

151499904
F4853.0000: RNCC: 5 | RNVC: 2
F4853.0000: RNCC: 5 | RNVC: 9

20 Jul 1999

5340-15-073-5236
Rim Lock

150735236
1447BISPARTC: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-109-7130
Loop Clamp

151097130
14560080: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-187-4270
Mounting Bracket

151874270
504163293: RNCC: 3 | RNVC: 2
(7001)5340151874270(241)A4249504: RNCC: 5 | RNVC: 2

30 Mar 2009

5340-15-195-8293
Hand Crank

151958293
102599: RNCC: 3 | RNVC: 2
(241)A3593102599: RNCC: 5 | RNVC: 2

18 May 2011

5340-15-108-4230
Loop Clamp

151084230
12174590: RNCC: 3 | RNVC: 2

21 Jun 1996

5340-15-148-9854
Mounting Bracket

151489854
589 08: RNCC: 3 | RNVC: 2
589 08: RNCC: 5 | RNVC: 9

9 Nov 1998

5340-15-004-3770
Mending Plate

150043770
0-28166: RNCC: 3 | RNVC: 2

7 Sep 1977

5340-15-111-9300
Rod End Clevis

151119300
2489941: RNCC: 3 | RNVC: 2

10 Sep 1989

5340-15-002-2790
Mounting Bracket

150022790
504377939: RNCC: 3 | RNVC: 2

2 Aug 2013

5340-15-064-3800
Screw Thread Insert

150643800
F492D1-83: RNCC: 3 | RNVC: 2
F492D1-83: RNCC: 5 | RNVC: 2

1 Mar 1984

5340-15-118-7497
Mounting Bracket

151187497
9433724: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-002-6351
Loop Clamp

150026351
182718478: RNCC: 3 | RNVC: 2

11 Sep 2013

5340-15-050-9239
Retaining Clip

150509239
4T18826-1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-074-3944
Retaining Strap

150743944
C12UNAV1046A37UN1743CD: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-138-3582
Handle Grip

151383582
4239756: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-102-7168
Flush Lock

151027168
45482841: RNCC: 3 | RNVC: 2

27 Oct 1985

5340-15-118-8361
Mounting Bracket

151188361
9449688: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-157-7356
T Bracket

151577356
SOSTEGNO BISCAGLINA UMM1112: RNCC: 3 | RNVC: 2

16 Oct 2003

5340-15-188-6047
Mounting Bracket

151886047
309899: RNCC: 3 | RNVC: 2

13 Oct 2009

5340-15-059-1968
Angle Bracket

150591968
314-0286-01L: RNCC: 3 | RNVC: 2

19 Jun 1974

5340-15-045-2936
Loop Clamp

150452936
N0R2-505-06-32B: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-052-2226
Loop Clamp

150522226
N0R2-505-06-17B: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-178-5321
Detent Plunger

151785321
R250-07: RNCC: 3 | RNVC: 2
R250-07: RNCC: 5 | RNVC: 9

1 Jul 2005

5340-15-179-9470
Mounting Bracket

151799470
500414608: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-178-4682
Stand Base

151784682
DYA020: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-001-4336
Mounting Bracket

150014336
500436996: RNCC: 3 | RNVC: 2

2 Jul 2013

5340-15-111-2800
Spring Holder

151112800
DOA091022: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-073-8921
Flush Lock

150738921
13B65X80-3LEVE: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-157-9574
Mortise Latch Set

151579574
322510000: RNCC: 3 | RNVC: 2
(241)A0094322510000: RNCC: 5 | RNVC: 2

3 Dec 2003

5340-15-062-9155
Angle Bracket

150629155
0-100233: RNCC: 3 | RNVC: 2

28 Aug 1981

5340-15-007-7065
Loop Clamp

150077065
4514442: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-108-5232
Loop Clamp

151085232
60103306: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-122-0610
Mounting Plate

151220610
236BE250-1: RNCC: 3 | RNVC: 2

23 Apr 1996

5340-15-162-6641
Hand Crank Arm

151626641
592.61394: RNCC: 3 | RNVC: 2

7 Dec 2001

5340-15-071-9218
Rim Lock

150719218
1971TAV023MSENSP0TCR: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-005-2607
Retaining Clip

150052607
109-0710-35-1: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-063-3417
Loop Clamp

150633417
60109117: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-007-3881
Loop Clamp

150073881
1392672: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-121-9653
Loop Clamp

151219653
181S020120: RNCC: 3 | RNVC: 2

2 Apr 1996

5340-15-118-4590
Mending Plate

151184590
60153617: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-179-7337
Loop Clamp

151797337
99455033: RNCC: 3 | RNVC: 2
(241)A424999455033: RNCC: 5 | RNVC: 2

7 Jun 2007

5340-15-152-2340
Mounting Plate

151522340
8.190.112: RNCC: 3 | RNVC: 2

17 Aug 2000

5340-15-109-5770
Angle Bracket

151095770
20970189A: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-187-6846
Swivel Caster

151876846
KR3202: RNCC: 3 | RNVC: 2

27 Apr 2009

5340-15-179-7168
Mounting Bracket

151797168
0000500401375: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-116-4990
Strap Hinge

151164990
60165834: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-104-4349
Expansion Plug

151044349
4B: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-150-0882
Loop Clamp

151500882
016010244: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-119-9249
Loop Clamp

151199249
69F004P004: RNCC: 3 | RNVC: 2
69F004P004: RNCC: 3 | RNVC: 2

21 Nov 1994

5340-15-001-8248
Mounting Bracket

150018248
5949784058: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-195-7971
Mounting Bracket

151957971
341124: RNCC: 3 | RNVC: 2
(241)AJ611341124: RNCC: 5 | RNVC: 2

16 May 2011

5340-15-179-9394
Mounting Bracket

151799394
504117305: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-122-2484
Mounting Bracket

151222484
80A068380: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-153-6884
Loop Clamp

151536884
142068036: RNCC: 3 | RNVC: 2

20 Feb 2001

5340-15-148-4641
Caster Wheel

151484641
06TAV1321.0: RNCC: 3 | RNVC: 2

13 Aug 1998

5340-15-060-4598
Butt Hinge

150604598
1971TAV69-21LL0SSIDNATSINISTRA: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-154-6700
Vent Plug

151546700
SFP 16X1.5+F: RNCC: 2 | RNVC: 3
723009591500: RNCC: 2 | RNVC: 3

3 Aug 2001

5340-15-187-8210
Mounting Bracket

151878210
018.066.00.44_SX: RNCC: 3 | RNVC: 2
(241)A6479018.066.00.44_SX: RNCC: 5 | RNVC: 2
018.066.00.44_SX: RNCC: 5 | RNVC: 2

7 May 2009

5340-15-205-2611
Butt Hinge

152052611
504374958: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-156-4071
Loop Clamp

151564071
142068211: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-062-7926
Angle Bracket

150627926
0-34176: RNCC: 3 | RNVC: 2

28 Aug 1982

5340-15-117-2623
Cushioning Pad

151172623
132505012: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-15-180-4637
Control Rod

151804637
20265814: RNCC: 3 | RNVC: 2
(241)A424942556710: RNCC: 5 | RNVC: 2
42556710: RNCC: 5 | RNVC: 2

27 May 2008

5340-15-170-9011
Loop Clamp

151709011
72106744: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-152-2504
Mounting Bracket

151522504
D22 D365 00P: RNCC: 3 | RNVC: 2

17 Aug 2000

5340-15-187-1431
Loop Clamp

151871431
3630.217: RNCC: 3 | RNVC: 2
3630.217: RNCC: 5 | RNVC: 2

19 Feb 2009

5340-15-156-4073
Loop Clamp

151564073
142068213: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-155-8963
Vent Plug

151558963
TKTG20N-0-A-FS: RNCC: 3 | RNVC: 2

13 Sep 2002

5340-15-113-3936
Butt Hinge

151133936
9CA1780A023-402: RNCC: 3 | RNVC: 2

19 Jun 1991

5340-15-001-1389
Loop Clamp

150011389
98431476: RNCC: 3 | RNVC: 2

31 May 2013

5340-15-153-0292
Stand Base

151530292
01800A106130: RNCC: 5 | RNVC: 2
01800A106130: RNCC: 5 | RNVC: 9

15 Nov 2000

5340-15-118-3658
Mending Plate

151183658
60141658: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-062-7915
Angle Bracket

150627915
0-34165: RNCC: 3 | RNVC: 2

28 Aug 1982

5340-15-007-9706
Loop Clamp

150079706
1-04413-90: RNCC: 3 | RNVC: 2
1-04413-90: RNCC: 5 | RNVC: 9

22 Sep 1979

5340-15-163-4589
Rod End Connector

151634589
17H-329A01000-013-404: RNCC: 3 | RNVC: 2

24 Sep 2002

5340-15-120-6092
Angle Bracket

151206092
129-0700-14-121: RNCC: 3 | RNVC: 2

10 Jul 1995

5340-15-157-9224
Mending Plate

151579224
0-163395: RNCC: 3 | RNVC: 2
(241)A39630-163395: RNCC: 5 | RNVC: 2
1PA39630-163395: RNCC: 5 | RNVC: 2

24 Nov 2003

5340-15-000-8796
Mounting Bracket

150008796
507: RNCC: 3 | RNVC: 2

16 Apr 2013

5340-15-163-4022
Loop Clamp

151634022
9844684: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-104-4348
Expansion Plug

151044348
2.3170.023.1: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-179-0649
Mounting Bracket

151790649
R116,138: RNCC: 3 | RNVC: 2

20 Apr 2006

5340-15-008-0562
Loop Clamp

150080562
60112995: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-186-8564
Loop Clamp

151868564
TA028M016NB06: RNCC: 3 | RNVC: 2
A708AA06: RNCC: 3 | RNVC: 2
(241)84971TA028M016NB06: RNCC: 5 | RNVC: 2

5 Jan 2009

5340-15-179-8934
Mounting Bracket

151798934
D1402430: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-122-2584
Loop Clamp

151222584
800031542: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-177-3535
Bridge Clamp

151773535
02.894: RNCC: 3 | RNVC: 2
P00488: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-193-1460
Rod End Clevis

151931460
504124239: RNCC: 3 | RNVC: 2
(241)A4249504124239: RNCC: 5 | RNVC: 2

20 Apr 2010

5340-15-001-8252
Mounting Bracket

150018252
5949789068: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-151-9408
Angle Bracket

151519408
0-174009: RNCC: 3 | RNVC: 2

26 Jul 2000

5340-15-063-3873
Retaining Strap

150633873
60109077: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-151-1889
Mounting Bracket

151511889
AF060181105: RNCC: 3 | RNVC: 2

14 Apr 2000

5340-15-180-3305
Clevis And U-Bolt

151803305
(241)A4249504120001: RNCC: 3 | RNVC: 2
504120001: RNCC: 3 | RNVC: 2

18 Apr 2008

5340-15-005-3076
Retaining Strap

150053076
0-16174: RNCC: 3 | RNVC: 2

7 Sep 1978

5340-15-178-6492
Mounting Plate

151786492
2231.061.0001: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-207-0054
Mounting Bracket

152070054
4112T71G03: RNCC: 3 | RNVC: 2
(241)A34604112T71G03: RNCC: 5 | RNVC: 2

8 Aug 2012

5340-15-179-7306
Loop Clamp

151797306
41231090: RNCC: 3 | RNVC: 2
(241)A424941231090: RNCC: 5 | RNVC: 2

7 Jun 2007

5340-15-163-3628
Mounting Bracket

151633628
4791465: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-002-3601
Bridge Clamp

150023601
4852221: RNCC: 3 | RNVC: 2
0053586: RNCC: 5 | RNVC: 2
4852221: RNCC: 5 | RNVC: 2
4852221: RNCC: 5 | RNVC: 9
0053586: RNCC: 5 | RNVC: 9

16 Aug 2013

5340-15-059-7683
Loop Clamp

150597683
1127-08-791: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-126-7664
Handle Grip

151267664
258833: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-003-1308
Cover Retainer

150031308
5949791051: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-007-2224
Retaining Strap

150072224
1398300: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-197-1767
Rim Lock Set

151971767
PN UAS 00019051: RNCC: 3 | RNVC: 2
5340F76025667: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-152-3806
Loop Clamp

151523806
0-33483: RNCC: 3 | RNVC: 2

6 Sep 2000

5340-15-058-5611
Loop Clamp

150585611
1429D: RNCC: 3 | RNVC: 2
1429D: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-189-2422
Loop Clamp

151892422
0000500362803: RNCC: 3 | RNVC: 2
500362803: RNCC: 3 | RNVC: 2

10 Feb 2010

5340-15-118-9245
Angle Bracket

151189245
73154950: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-108-6290
Strap Hinge

151086290
93919412: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-118-3411
Loop Clamp

151183411
60141428: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-103-4339
Loop Clamp

151034339
23.12.69.01: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-109-9574
Retaining Strap

151099574
11816-103A00: RNCC: 3 | RNVC: 2
11816-103: RNCC: 5 | RNVC: 2

14 Mar 1990

5340-15-063-7999
Retaining Strap

150637999
11340131: RNCC: 3 | RNVC: 2
77901488: RNCC: 5 | RNVC: 2

31 Mar 1982

5340-15-178-7613
Mounting Bracket

151787613
026058: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-120-3556
Angle Bracket

151203556
60176188: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-151-7858
Angle Bracket

151517858
0-179418: RNCC: 3 | RNVC: 2

10 Jul 2000

5340-15-005-3278
Flush Catch

150053278
ART361-4: RNCC: 3 | RNVC: 2

19 Jan 1979

5340-15-055-9631
Retaining Strap

150559631
8UNI2134A34-2633CDCR: RNCC: 2 | RNVC: 2
240032964: RNCC: 5 | RNVC: 2
2400-32-964: RNCC: 5 | RNVC: 2

5 Apr 1994

5340-15-105-4925
Support Hook

151054925
503-03-4522: RNCC: 5 | RNVC: 2
503-03-4522: RNCC: 5 | RNVC: 9

30 May 1989

5340-15-113-0844
Retaining Strap

151130844
21367-002C1: RNCC: 3 | RNVC: 2
21367-002C01: RNCC: 5 | RNVC: 2

9 May 1991

5340-15-104-4359
Expansion Plug

151044359
47-8990-06: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-147-0886
Filler Opening Cap

151470886
B13002E-057: RNCC: 3 | RNVC: 2

21 Aug 1997

5340-15-118-3376
Angle Bracket

151183376
60141544: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-102-0782
Butt Hinge Leaf

151020782
213A7048-001: RNCC: 3 | RNVC: 2

29 Jul 1988

5340-15-187-8229
Mounting Bracket

151878229
018.067.10_00: RNCC: 3 | RNVC: 2
018.067.10_00: RNCC: 5 | RNVC: 2
(241)A6479018.067.10_00: RNCC: 5 | RNVC: 2

7 May 2009

5340-15-073-8907
Flush Lock

150738907
13A65X55-3LEVE: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-116-7765
Retaining Strap

151167765
LK4/1: RNCC: 3 | RNVC: 2

21 Apr 1994

5340-15-060-2529
Rod End Clevis

150602529
4160-29: RNCC: 3 | RNVC: 2

7 Dec 1976

5340-15-180-1638
Mounting Plate

151801638
3800037: RNCC: 3 | RNVC: 2

15 Feb 2008

5340-15-157-6419
Block Clamp

151576419
AIT13901GGEEE7709: RNCC: 3 | RNVC: 2
TA30500763-21: RNCC: 8 | RNVC: 2

12 Oct 2003

5340-15-109-9579
Retaining Strap

151099579
10111-101A02: RNCC: 3 | RNVC: 2
10111-101A2: RNCC: 5 | RNVC: 2

14 Mar 1990

5340-15-204-4510
Mounting Bracket

152044510
500358441: RNCC: 3 | RNVC: 2
0054163: RNCC: 5 | RNVC: 2

7 Nov 2011

5340-15-117-9356
Mending Plate

151179356
142512165: RNCC: 3 | RNVC: 2

8 Feb 1994

5340-15-201-0948
Retaining Band

152010948
5201A034: RNCC: 3 | RNVC: 2
(241)A08105201A034: RNCC: 5 | RNVC: 2

28 May 2006

5340-15-118-4427
Angle Bracket

151184427
60156129: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-122-0936
Screw Thread Insert

151220936
529N1010403: RNCC: 3 | RNVC: 2
529N1010403: RNCC: 5 | RNVC: 9

30 Apr 1996

5340-15-065-7273
Access Door Hinge

150657273
109-0360-14-1: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-15-151-6040
Angle Bracket

151516040
42031241: RNCC: 3 | RNVC: 2

19 Jun 2000

5340-15-009-0912
Lock-Release Lever

150090912
1376-02-150: RNCC: 3 | RNVC: 2
137602150: RNCC: 5 | RNVC: 2

1 Jun 1987

5340-15-207-8551
Mounting Bracket

152078551
109-0709-21-127: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-179-6488
Angle Bracket

151796488
J53350620-002: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-151-9446
Angle Bracket

151519446
0-174638: RNCC: 3 | RNVC: 2
00174638: RNCC: 3 | RNVC: 2
(241)A39630-174638: RNCC: 5 | RNVC: 2
1PA39630-174638: RNCC: 5 | RNVC: 2

26 Jul 2000

5340-15-059-3579
Retaining Strap

150593579
1127-32-272: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-109-3811
Plain Solid Disk

151093811
5137-290-49: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-120-8101
Bow Handle

151208101
A126583: RNCC: 3 | RNVC: 2

4 Jul 1996

5340-15-153-9066
Mounting Bracket

151539066
9535T7: RNCC: 3 | RNVC: 2
(241)A333400085357: RNCC: 4 | RNVC: 1
00085357: RNCC: 5 | RNVC: 2

9 Mar 2001

5340-15-063-3243
Retaining Strap

150633243
60110046: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-007-8971
Expansion Plug

150078971
1-01584-50: RNCC: 3 | RNVC: 2
10158450: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-198-0723
Protection Bellows

151980723
C2-PSC925DA-SR: RNCC: 3 | RNVC: 2
(241)A3121C2-PSC925DA-SR: RNCC: 5 | RNVC: 2

10 Jun 2004

5340-15-100-7633
Rod End Clevis

151007633
109-0110-28-5: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-15-112-8757
Loop Clamp

151128757
60150959: RNCC: 3 | RNVC: 2

16 Sep 1989

5340-15-197-8968
Door Handle

151978968
0000500403820: RNCC: 3 | RNVC: 2
(241)A39630000500403820: RNCC: 5 | RNVC: 2

24 May 2004

5340-15-181-3122
Retaining Clip

151813122
1100906: RNCC: 3 | RNVC: 2
(241)A42491100906: RNCC: 5 | RNVC: 2

26 Nov 2008

5340-15-001-8391
Mounting Bracket

150018391
500435120: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-156-3696
Mounting Bracket

151563696
(241)A3460CBD71329P02: RNCC: 3 | RNVC: 2
CBD71329P02: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-005-2660
Access Door Hinge

150052660
0-33454: RNCC: 3 | RNVC: 2

7 Sep 1978

5340-15-118-9657
Loop Clamp

151189657
75206887: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-112-3475
Retaining Strap

151123475
9067199: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-177-3748
Mounting Plate

151773748
026818: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-119-1875
Access Cover

151191875
75214905: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-153-5875
Access Cover

151535875
142004176: RNCC: 3 | RNVC: 2

16 Feb 2001

5340-15-110-7161
Retaining Strap

151107161
23882-001A00: RNCC: 3 | RNVC: 2
23882-001: RNCC: 5 | RNVC: 2

17 Jul 1990

5340-15-154-3396
Angle Bracket

151543396
212-061-902-1182: RNCC: 3 | RNVC: 2

4 May 2001

5340-15-102-0783
Butt Hinge Leaf

151020783
213A7089-001: RNCC: 3 | RNVC: 2

29 Jul 1988

5340-15-178-4826
Access Cover

151784826
504010962: RNCC: 3 | RNVC: 2
A100009-001: RNCC: 5 | RNVC: 2

1 Jul 2005

5340-15-150-1902
Retaining Strap

151501902
A0008925: RNCC: 3 | RNVC: 2

25 Aug 1999

5340-15-205-2600
Retaining Bail

152052600
504366523: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-003-7588
Access Cover

150037588
PXGL.420X120X4: RNCC: 3 | RNVC: 2

21 Nov 2013

5340-15-118-4775
Rod End Connector

151184775
1/33451/10: RNCC: 3 | RNVC: 2
1/33451/10: RNCC: 5 | RNVC: 9

6 Feb 1995

5340-15-154-4045
Angle Bracket

151544045
A6120-91094-7: RNCC: 3 | RNVC: 2

22 May 2001

5340-15-201-3866
Screw Thread Insert

152013866
5387.4B-2104/3: RNCC: 3 | RNVC: 2
(241)A53875387.4B-2104/3: RNCC: 5 | RNVC: 2

30 Jul 2006

5340-15-154-2038
Angle Bracket

151542038
0-168379: RNCC: 3 | RNVC: 2
(241)A39630-168379: RNCC: 5 | RNVC: 2
1PA39630-168379: RNCC: 5 | RNVC: 2

28 Mar 2001

5340-15-100-2721
Access Door Hinge

151002721
2-54258-101-74624A2: RNCC: 3 | RNVC: 2

22 Oct 1986

5340-15-210-4627
Angle Bracket

152104627
EX5510RI2703854: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-101-9102
Mending Plate

151019102
1Q245279: RNCC: 3 | RNVC: 2
1Q245279: RNCC: 5 | RNVC: 9

25 Nov 1992

5340-15-205-4786
Retaining Band

152054786
L65891524: RNCC: 3 | RNVC: 2
(241)A0302L65891524: RNCC: 5 | RNVC: 2

14 Mar 2012

5340-15-005-2267
Rod End Clevis

150052267
6152631: RNCC: 3 | RNVC: 2

16 Sep 1980

5340-15-153-5241
Access Cover

151535241
142076924: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-059-3445
Retaining Strap

150593445
1127-32-258: RNCC: 3 | RNVC: 2

16 Sep 1980

5340-15-188-3828
Leakproof Seal Plug

151883828
437-3504: RNCC: 3 | RNVC: 2

3 Sep 2009

5340-15-052-0378
Loop Clamp

150520378
M781-20-75-12: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-101-8223
Coat And Hat Hook

151018223
850234: RNCC: 3 | RNVC: 2

10 Nov 1987

5340-15-002-3056
Mounting Bracket

150023056
99367361: RNCC: 3 | RNVC: 2

5 Aug 2013

5340-15-149-3347
Mending Plate

151493347
98444979: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-150-1006
Access Cover

151501006
120002012: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-003-1456
Angle Bracket

150031456
5949790571: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-063-7311
Retaining Strap

150637311
40.94.01.310: RNCC: 3 | RNVC: 2
19.23.59.00: RNCC: 5 | RNVC: 2

9 Jun 1983

5340-15-149-2962
Angle Bracket

151492962
4882613: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-118-4552
Retaining Strap

151184552
60149486: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-007-2422
Retaining Strap

150072422
4676185: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-003-7593
Retaining Clip

150037593
504052515: RNCC: 3 | RNVC: 2

21 Nov 2013

5340-15-108-4070
Loop Clamp

151084070
12179190: RNCC: 3 | RNVC: 2

21 Jun 1996

5340-15-122-2437
Loop Clamp

151222437
80A042349: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-206-2985
Bow Handle

152062985
GP3832: RNCC: 3 | RNVC: 2

1 Jun 2012

5340-15-118-6609
Clamping Catch

151186609
73125832: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-058-6111
Strap Fastener Loop

150586111
C243985C: RNCC: 5 | RNVC: 2
C243985C: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-059-2484
Retaining Strap

150592484
1127-05-526: RNCC: 3 | RNVC: 2

12 Oct 1974

5340-15-178-4886
Spring Tension Clip

151784886
500378001: RNCC: 3 | RNVC: 2
A142011-008: RNCC: 5 | RNVC: 2
(241)A4249500378001: RNCC: 5 | RNVC: 2

1 Jul 2005

5340-15-193-6612
Handwheel

151936612
163121572: RNCC: 3 | RNVC: 2
VCT.FP 69956: RNCC: 3 | RNVC: 2
(241)A0774VCT.FP69956: RNCC: 5 | RNVC: 2
(241)A0199163121572: RNCC: 5 | RNVC: 2

28 Jun 2010

5340-15-121-2667
Access Cover

151212667
0390301852: RNCC: 3 | RNVC: 2

7 Nov 1995

5340-15-007-9285
Handle Grip

150079285
4349924: RNCC: 3 | RNVC: 2
4349924: RNCC: 5 | RNVC: 9

1 Mar 1980

5340-15-061-2653
Plain Solid Disk

150612653
000200051900: RNCC: 5 | RNVC: 2
1200096-151100001: RNCC: 5 | RNVC: 2
000200051900: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-009-7118
Mending Plate

150097118
1236-15-170: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-202-4478
Luggage Lock

152024478
1510/4: RNCC: 3 | RNVC: 2
(241)A52001510/4: RNCC: 5 | RNVC: 2

25 Mar 2007

5340-15-108-7599
Retaining Strap

151087599
93920010: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-153-7745
Access Cover

151537745
02700A133260: RNCC: 5 | RNVC: 2
T0065000: RNCC: 5 | RNVC: 2
02700A133260: RNCC: 5 | RNVC: 9

28 Feb 2001

5340-15-063-4815
Angle Bracket

150634815
42009233: RNCC: 3 | RNVC: 2

15 Jun 1982

5340-15-201-0592
Loop Clamp

152010592
A079A022NB: RNCC: 3 | RNVC: 2
(241)A0126A079A022NB: RNCC: 5 | RNVC: 2

16 May 2006

5340-15-064-7103
Flush Catch

150647103
USM 325A: RNCC: 3 | RNVC: 2

24 Jun 1984

5340-15-202-9719
Mounting Bracket

152029719
C7258W28B1: RNCC: 3 | RNVC: 2
(241)A0069C7258W28B1: RNCC: 5 | RNVC: 2

14 Oct 2007

5340-15-179-6967
Mounting Bracket

151796967
0000500403473: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-202-8936
Loop Clamp

152028936
17314690: RNCC: 3 | RNVC: 2
(241)A424917314690: RNCC: 5 | RNVC: 2

8 Jun 2011

5340-15-008-0564
Loop Clamp

150080564
60112433: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-178-6304
Mounting Bracket

151786304
M382T: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-073-5217
Rim Lock Set

150735217
1447BISPARTH: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-073-5239
Rim Lock Set

150735239
18300-006: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-119-0890
Loop Clamp

151190890
70930846: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-045-3926
Loop Clamp

150453926
N0R4-110-20-5: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-004-2309
Angle Bracket

150042309
2-15224-120-76246: RNCC: 3 | RNVC: 2

25 Dec 1977

5340-15-107-2480
Mending Plate

151072480
3070-000084: RNCC: 3 | RNVC: 2
3070-84: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-195-4736
Mounting Bracket

151954736
ICA-PM 104M: RNCC: 3 | RNVC: 2
(241)AD830ICA-PM104M: RNCC: 5 | RNVC: 2

29 Mar 2011

5340-15-003-1310
Angle Bracket

150031310
5949785012: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-108-6271
Retaining Strap

151086271
60136057: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-122-2171
Loop Clamp

151222171
800059288: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-008-5987
Angle Bracket

150085987
60114212: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-122-0100
Flush Catch

151220100
60177113: RNCC: 3 | RNVC: 2

10 Apr 1996

5340-15-108-7044
Retaining Strap

151087044
1368758: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-189-0664
Mounting Bracket

151890664
D1402464: RNCC: 3 | RNVC: 2

22 Jan 2010

5340-15-116-4820
Angle Bracket

151164820
4853862: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-163-3885
Bridge Clamp

151633885
9478197: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-108-6164
Rod End Clevis

151086164
4029173: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-107-2517
Angle Bracket

151072517
3422-71: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-106-9667
Angle Bracket

151069667
8982993: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-002-1581
Mounting Plate

150021581
99R01249108O: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-001-5809
Utility Access Door

150015809
42566653: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-060-1449
Screw Thread Insert

150601449
1376-31-367: RNCC: 3 | RNVC: 2
137631367: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-057-2167
Loop Clamp

150572167
7-7543-301-45749: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-065-7274
Access Door Hinge

150657274
109-0360-14-2: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-15-100-1679
Rod End Clevis

151001679
39A502-12-18A: RNCC: 3 | RNVC: 2

20 Jan 1987

5340-15-149-5930
Bow Handle

151495930
341-4589/03: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-147-3652
Access Cover

151473652
109-0731-41-119: RNCC: 3 | RNVC: 2

31 Oct 1997

5340-15-102-0216
Hand Crank

151020216
W76A9-89: RNCC: 3 | RNVC: 2

30 Jan 1988

5340-15-040-4208
Handle Grip

150404208
7-5713-100-25637-2: RNCC: 3 | RNVC: 2
7-5713-1-00-25637-2: RNCC: 5 | RNVC: 2

10 Apr 1970

5340-15-170-6697
Bridge Clamp

151706697
71-201430: RNCC: 3 | RNVC: 2

5 May 2003

5340-15-108-1740
Lock-Release Lever

151081740
1376-23-332: RNCC: 3 | RNVC: 2
137623332: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-202-3010
Screw Thread Insert

152023010
999-5000-30-107: RNCC: 3 | RNVC: 2
(241)A0126999-5000-30-107: RNCC: 5 | RNVC: 2

20 Feb 2007

5340-15-119-4510
Retaining Strap

151194510
28030-101B01: RNCC: 3 | RNVC: 2
28030-101B1: RNCC: 5 | RNVC: 2

26 Jul 1994

5340-15-063-5415
Screw Thread Insert

150635415
67454-101A1: RNCC: 3 | RNVC: 2

1 Mar 1983

5340-15-113-5537
Access Door Hinge

151135537
129-0640-15-101: RNCC: 3 | RNVC: 2

14 Jan 1992

5340-15-008-7018
Angle Bracket

150087018
1141-31-108: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-054-8049
Angle Bracket

150548049
32-83-107: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-100-9340
Retaining Strap

151009340
01-250-15305AEP: RNCC: 3 | RNVC: 2

23 Jun 1987

5340-15-061-2489
Access Door Hinge

150612489
26277-101: RNCC: 3 | RNVC: 2

31 Aug 1977

5340-15-117-2239
Angle Bracket

151172239
02-10-242-11-2: RNCC: 3 | RNVC: 2

30 May 1994

5340-15-113-0835
Rod End Connector

151130835
68680-001A1: RNCC: 3 | RNVC: 2

9 May 1991

5340-15-153-3880
Mending Plate

151533880
5137-308-05: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-112-1907
Handle Grip

151121907
275A3514-001: RNCC: 3 | RNVC: 2

10 Mar 1991

5340-15-004-7674
Retaining Strap

150047674
68163-101: RNCC: 3 | RNVC: 2

10 Apr 1978

5340-15-062-5264
Angle Bracket

150625264
1113-04-900: RNCC: 3 | RNVC: 2
(7001)5340150625264: RNCC: 5 | RNVC: 2

2 Dec 1981

5340-15-108-3410
Retaining Strap

151083410
333A0025-001: RNCC: 3 | RNVC: 2

10 Apr 1989

5340-15-155-0461
Angle Bracket

151550461
J92440223-001: RNCC: 3 | RNVC: 2

9 Jan 2002

5340-15-151-9631
Retaining Strap

151519631
0-173677: RNCC: 3 | RNVC: 2
00173677: RNCC: 3 | RNVC: 2
(241)A39630-173677: RNCC: 5 | RNVC: 2
1PA39630-173677: RNCC: 5 | RNVC: 2

27 Jul 2000

5340-15-068-4522
Butt Hinge Leaf

150684522
808-11411-05: RNCC: 3 | RNVC: 2

5 Mar 1986

5340-15-103-8668
Loop Clamp

151038668
10450790: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-119-5509
Loop Clamp

151195509
4788621: RNCC: 3 | RNVC: 2

19 Sep 1994

5340-15-127-3941
Retaining Band

151273941
3216-99050: RNCC: 3 | RNVC: 2
3216-99050: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-122-2703
Mounting Plate

151222703
800046592: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-045-3082
Rod End Clevis

150453082
501-12-01-03: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-177-3624
Loop Clamp

151773624
FS026-38: RNCC: 3 | RNVC: 2
001165AA: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-065-1507
Access Door Hinge

150651507
2-54259-101-74623A2: RNCC: 3 | RNVC: 2

19 Dec 1984

5340-15-114-7349
Vent Plug

151147349
TSF1: RNCC: 3 | RNVC: 2
D0591071: RNCC: 5 | RNVC: 2

30 Jul 1992

5340-15-203-3649
Control Rod

152033649
504356345: RNCC: 3 | RNVC: 2
(241)A4249504356345: RNCC: 5 | RNVC: 2

8 Jun 2011

5340-15-119-5668
Retaining Strap

151195668
4881259: RNCC: 3 | RNVC: 2

19 Sep 1994

5340-15-153-9410
Angle Bracket

151539410
142058123: RNCC: 2 | RNVC: 3

12 Mar 2001

5340-15-115-6893
Mending Plate

151156893
D1401064: RNCC: 3 | RNVC: 2

7 Mar 1994

5340-15-118-3661
Mending Plate

151183661
60141432: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-150-7246
Hand Crank

151507246
20120583: RNCC: 3 | RNVC: 2

20 Dec 1999

5340-15-063-8803
Screw Thread Insert

150638803
50743: RNCC: 3 | RNVC: 2

15 Sep 1982

5340-15-118-0912
Valve Seat

151180912
D0467446: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-009-8101
Angle Bracket

150098101
999-0300-01-3: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-000-3947
Control Rod

150003947
C72277: RNCC: 3 | RNVC: 2

27 Feb 2013

5340-15-102-1200
Clip Retainer Plate

151021200
V44/1-03-207: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-178-2388
Rod End Clevis

151782388
109-0811-73-105: RNCC: 3 | RNVC: 2

11 Mar 2005

5340-15-195-1159
Retaining Band

151951159
VA0011525: RNCC: 3 | RNVC: 2
(241)A3488VA0011525: RNCC: 5 | RNVC: 2

3 Mar 2011

5340-15-153-7029
Handle Grip

151537029
142004160: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-169-2479
Coat And Hat Hook

151692479
F72009835: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-161-0631
Angle Bracket

151610631
F720130841: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-008-1011
Plug Button

150081011
4263402: RNCC: 3 | RNVC: 2
004263402: RNCC: 5 | RNVC: 2
4263402: RNCC: 5 | RNVC: 9

29 Sep 1980

5340-15-194-0034
Synchro Clamp

151940034
109-0010-97-101: RNCC: 3 | RNVC: 2

12 Aug 2010

5340-15-153-3896
Mending Plate

151533896
5137-315-05: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-060-8040
Retaining Strap

150608040
000200367450: RNCC: 5 | RNVC: 2
1200096-100000005: RNCC: 5 | RNVC: 2
000200367450: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-059-3578
Retaining Strap

150593578
1127-36-224: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-111-8409
Mending Plate

151118409
65571120: RNCC: 3 | RNVC: 2
8193998: RNCC: 5 | RNVC: 2

14 Jun 1988

5340-15-119-5479
Loop Clamp

151195479
4739061: RNCC: 3 | RNVC: 2

19 Sep 1994

5340-15-118-3885
Bow Handle

151183885
60159995: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-065-1110
Retaining Strap

150651110
141412: RNCC: 3 | RNVC: 2

6 Mar 1984

5340-15-111-4192
Angle Bracket

151114192
329162P4: RNCC: 3 | RNVC: 2
329162P4: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-177-4299
Mounting Bracket

151774299
050433: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-153-7246
Loop Clamp

151537246
142030123: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-007-9595
Loop Clamp

150079595
4437674: RNCC: 3 | RNVC: 2
4437674: RNCC: 5 | RNVC: 9

22 Sep 1979

5340-15-187-1998
Strap Hinge

151871998
SC 100 625: RNCC: 3 | RNVC: 2
(241)A3980SC100625: RNCC: 5 | RNVC: 2

24 Feb 2009

5340-15-118-9091
Loop Clamp

151189091
70621728: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-153-7245
Loop Clamp

151537245
142030122: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-004-2853
Rod End Clevis

150042853
05333-101: RNCC: 3 | RNVC: 2

27 Feb 1978

5340-15-001-8263
Bridge Clamp

150018263
500404443: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-105-4419
Handle Grip

151054419
587406: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-121-9181
Angle Bracket

151219181
60163003: RNCC: 3 | RNVC: 2

29 Mar 1996

5340-15-008-1670
Screw Thread Insert

150081670
A04-10095-164: RNCC: 5 | RNVC: 2
A04-10095-164: RNCC: 5 | RNVC: 9
A04-10095-164: RNCC: 5 | RNVC: 9

10 May 1981

5340-15-111-9497
Butt Hinge Leaf

151119497
700A3606-003: RNCC: 3 | RNVC: 2

30 Jan 1991

5340-15-109-3838
Angle Bracket

151093838
5137-293-07: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-107-5352
Loop Clamp

151075352
SR 2136: RNCC: 3 | RNVC: 2

22 Mar 1988

5340-15-004-7624
Retaining Strap

150047624
69550-101A1: RNCC: 3 | RNVC: 2

10 Apr 1978

5340-15-195-2191
Access Cover

151952191
219828200: RNCC: 3 | RNVC: 2
219828200: RNCC: 5 | RNVC: 2
CV173690: RNCC: 5 | RNVC: 2

7 Mar 2011

5340-15-117-4380
Rod End Clevis

151174380
142502244: RNCC: 3 | RNVC: 2

13 Oct 1993

5340-15-153-5171
Access Cover

151535171
142010841: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-118-8194
Expansion Plug

151188194
14282370: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-119-3851
Mending Plate

151193851
60170371: RNCC: 3 | RNVC: 2

25 Jul 1994

5340-15-202-4488
Luggage Lock

152024488
1600/4: RNCC: 3 | RNVC: 2
(241)A52001600/4: RNCC: 5 | RNVC: 2

25 Mar 2007

5340-15-179-1620
T Bracket

151791620
RS 301 811: RNCC: 3 | RNVC: 2

13 Jun 2006

5340-15-170-6152
Mounting Bracket

151706152
STPVC90: RNCC: 3 | RNVC: 2
CAE00384: RNCC: 5 | RNVC: 2

2 Apr 2003

5340-15-152-6586
Expansion Plug

151526586
5.4 D: RNCC: 3 | RNVC: 2

9 Oct 2000

5340-15-073-8922
Flush Lock

150738922
13B65X90-3LEVE: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-006-4084
Loop Clamp

150064084
4214851: RNCC: 3 | RNVC: 2
4214851: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-006-3964
Leather Strap

150063964
1-129-616: RNCC: 3 | RNVC: 2
1-129-616: RNCC: 5 | RNVC: 9
1-129-616: RNCC: 5 | RNVC: 9

5 Sep 1979

5340-15-180-9192
Mounting Bracket

151809192
120015885: RNCC: 3 | RNVC: 2
(241)A5009120015885: RNCC: 5 | RNVC: 2

8 Aug 2008

5340-15-063-6311
Retaining Strap

150636311
4874137: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-103-1150
Spring Holder

151031150
DE160.02.161: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-001-4331
Mounting Bracket

150014331
5801602183: RNCC: 3 | RNVC: 2

2 Jul 2013

5340-15-073-5257
Flush Lock

150735257
1106: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-152-8041
Mounting Bracket

151528041
P420208: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-100-7699
Retaining Clip

151007699
8033: RNCC: 3 | RNVC: 2

27 Oct 1986

5340-15-121-5471
Angle Bracket

151215471
129-0101-48-101: RNCC: 3 | RNVC: 2

16 Jan 1996

5340-15-157-9171
Angle Bracket

151579171
0-163750: RNCC: 3 | RNVC: 2
(241)A39630-163750: RNCC: 5 | RNVC: 2
1PA39630-163750: RNCC: 5 | RNVC: 2

24 Nov 2003

5340-15-138-4736
Angle Bracket

151384736
5956799: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-117-1962
Mending Plate

151171962
190525112: RNCC: 3 | RNVC: 2

2 Sep 1993

5340-15-119-1693
Mounting Bracket

151191693
75208945: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-001-8322
Mounting Bracket

150018322
5949785429: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-207-0048
Mounting Bracket

152070048
4186T97G01: RNCC: 3 | RNVC: 2
(241)A34604186T97G01: RNCC: 5 | RNVC: 2

8 Aug 2012

5340-15-121-6643
Mounting Bracket

151216643
800057738: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-100-4057
Loop Clamp

151004057
22116: RNCC: 3 | RNVC: 2

27 Feb 1986

5340-15-118-4445
Strap Hinge

151184445
60153536: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-168-9509
Coat And Hat Hook

151689509
F72002338: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-144-9884
Mounting Bracket

151449884
109-3900-45-1: RNCC: 3 | RNVC: 2

26 Feb 1997

5340-15-181-2416
Tee Hinge

151812416
070822015-S.S.: RNCC: 3 | RNVC: 2

17 Nov 2008

5340-15-073-5215
Rim Lock Set

150735215
1756PART19: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-121-6704
Mounting Bracket

151216704
800071768: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-063-7514
Loop Clamp

150637514
40.20.01.308: RNCC: 3 | RNVC: 2
93.30.50.92: RNCC: 5 | RNVC: 2

10 May 1983

5340-15-153-9212
Clamping Catch

151539212
121110273: RNCC: 2 | RNVC: 3

12 Mar 2001

5340-15-003-9131
Mounting Plate

150039131
182741338: RNCC: 3 | RNVC: 2
(241)A0199182741338: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-152-7942
Mounting Plate

151527942
P140905: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-001-8315
Mounting Bracket

150018315
5949787257: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-104-4376
Expansion Plug

151044376
4.177.0060A: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-110-5594
Spring Holder

151105594
1Q 287765: RNCC: 3 | RNVC: 2
1Q 287765: RNCC: 5 | RNVC: 9

6 Apr 1996

5340-15-100-1932
Spring Holder

151001932
88331-55: RNCC: 3 | RNVC: 2

27 Sep 1985

5340-15-062-7263
Angle Bracket

150627263
1141-31-119: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-155-0482
Angle Bracket

151550482
J92440249-001: RNCC: 3 | RNVC: 2

9 Jan 2002

5340-15-007-3288
Mending Plate

150073288
1376-23-213: RNCC: 3 | RNVC: 2

27 Oct 1979

5340-15-049-4144
Retaining Ring

150494144
N1-10876-75T12250: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-059-7264
Loop Clamp

150597264
05135-001: RNCC: 3 | RNVC: 2
05135-001B00: RNCC: 3 | RNVC: 2

19 Jun 1976

5340-15-121-9882
Angle Bracket

151219882
60175587: RNCC: 3 | RNVC: 2

4 Apr 1996

5340-15-108-3113
Angle Bracket

151083113
60130121: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-116-4811
Angle Bracket

151164811
60166332: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-005-2206
Hand Crank Arm

150052206
565072212000: RNCC: 2 | RNVC: 3
5072212: RNCC: 3 | RNVC: 2

16 Sep 1980

5340-15-207-0056
Mounting Bracket

152070056
4112T95G05: RNCC: 3 | RNVC: 2
(241)A34604112T95G05: RNCC: 5 | RNVC: 2

8 Aug 2012

5340-15-005-3992
Loop Clamp

150053992
4046537: RNCC: 3 | RNVC: 2
4046537: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-151-4781
Angle Bracket

151514781
0-170834: RNCC: 3 | RNVC: 2
(241)A39630-170834: RNCC: 5 | RNVC: 2
1PA39630-170834: RNCC: 5 | RNVC: 2

30 May 2000

5340-15-005-4084
Expansion Plug

150054084
2308-23356: RNCC: 3 | RNVC: 2
230823356: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-187-2022
Mounting Bracket

151872022
SC 100 650: RNCC: 3 | RNVC: 2
(241)A3980SC100650: RNCC: 5 | RNVC: 2

24 Feb 2009

5340-15-116-3955
Access Cover

151163955
220001116: RNCC: 3 | RNVC: 2

4 Oct 1993

5340-15-051-7996
Loop Clamp

150517996
1-02914-90: RNCC: 3 | RNVC: 2
10291490: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-100-1065
Access Door Hinge

151001065
P-882742-401: RNCC: 3 | RNVC: 2
P882742-401: RNCC: 5 | RNVC: 2

10 Sep 1986

5340-15-194-3767
Mounting Bracket

151943767
109-0860-16-107: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-15-105-4416
Handle Grip

151054416
AR 1: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-155-9731
Loop Clamp

151559731
EN2902F10W: RNCC: 2 | RNVC: 2

17 Oct 2002

5340-15-200-1919
Stand Base

152001919
157611179: RNCC: 3 | RNVC: 2
(241)A0199157611179: RNCC: 5 | RNVC: 2

24 Oct 2005

5340-15-177-3901
Mounting Bracket

151773901
035489: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-064-3993
Angle Bracket

150643993
60114301: RNCC: 3 | RNVC: 2

6 May 1983

5340-15-119-9049
Retaining Strap

151199049
180504116: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-204-0564
Retaining Clip

152040564
AN309KM 700: RNCC: 3 | RNVC: 2

23 Aug 2011

5340-15-177-3625
Loop Clamp

151773625
FS019-28-9: RNCC: 3 | RNVC: 2
001167AA: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-061-0493
Retaining Strap

150610493
234-19: RNCC: 3 | RNVC: 2

31 Mar 1976

5340-15-064-1344
Plug Button

150641344
999-5001-10-321: RNCC: 3 | RNVC: 2

21 Oct 1983

5340-15-120-3363
Access Cover

151203363
81655: RNCC: 3 | RNVC: 2
93163978: RNCC: 5 | RNVC: 2
81655: RNCC: 5 | RNVC: 9

30 Mar 1995

5340-15-119-7163
Angle Bracket

151197163
60173092: RNCC: 3 | RNVC: 2

8 Nov 1994

5340-15-008-0754
Angle Bracket

150080754
60114021: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-119-1493
Rod End Clevis

151191493
73126176: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-112-8625
Plug Button

151128625
55979: RNCC: 3 | RNVC: 2

3 Sep 1991

5340-15-149-3308
Loop Clamp

151493308
17316090: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-061-5952
Angle Bracket

150615952
P-125188-001: RNCC: 3 | RNVC: 2
P125188-001: RNCC: 5 | RNVC: 2

2 Mar 1978

5340-15-052-1295
Loop Clamp

150521295
N0R2-505-06-18B: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-111-9492
Butt Hinge Leaf

151119492
700A3603-001: RNCC: 3 | RNVC: 2

30 Jan 1991

5340-15-120-4495
Retaining Strap

151204495
142507300: RNCC: 3 | RNVC: 2

25 May 1995

5340-15-002-9608
Protection Bellows

150029608
110051: RNCC: 3 | RNVC: 2
(241)A3593110051: RNCC: 5 | RNVC: 2
(241)A5015DE160.04.494: RNCC: 5 | RNVC: 2
DE160.04.494: RNCC: 5 | RNVC: 2

22 Oct 2013

5340-15-119-7164
Angle Bracket

151197164
60173111: RNCC: 3 | RNVC: 2

8 Nov 1994

5340-15-004-9083
Clamping Catch

150049083
180-4540: RNCC: 3 | RNVC: 2

20 May 1978

5340-15-117-0541
Flange Protector

151170541
212-4600-18-1: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-150-6011
Retaining Strap

151506011
12060: RNCC: 3 | RNVC: 2

6 Dec 1999

5340-15-005-7057
Rod End Clevis

150057057
A1-45206-001: RNCC: 3 | RNVC: 2
A1-45206-001: RNCC: 5 | RNVC: 9

10 Apr 1979

5340-15-177-4210
Bridge Clamp

151774210
048067: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-153-6880
Loop Clamp

151536880
142068032: RNCC: 3 | RNVC: 2

20 Feb 2001

5340-15-177-3617
Mounting Bracket

151773617
000630AA: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-179-6820
Webbing Strap

151796820
0000500414584: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-205-1968
Pipe Hanger

152051968
00012710: RNCC: 3 | RNVC: 2

24 Feb 2012

5340-15-004-8694
Screw Thread Insert

150048694
20787-101: RNCC: 3 | RNVC: 2

28 Aug 1978

5340-15-109-8779
Angle Bracket

151098779
60112189: RNCC: 3 | RNVC: 2

15 Oct 1988

5340-15-045-2935
Loop Clamp

150452935
N0R2-505-06-32A: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-198-6114
Webbing Strap

151986114
990187: RNCC: 3 | RNVC: 2
(241)A3593990187: RNCC: 5 | RNVC: 2

19 Oct 2004

5340-15-117-4209
Mending Plate

151174209
132507147: RNCC: 3 | RNVC: 2

4 Oct 1993

5340-15-205-1029
Metal Grille

152051029
S2501021: RNCC: 3 | RNVC: 2
S2501021: RNCC: 5 | RNVC: 2

21 Feb 2012

5340-15-053-3413
Rim Lock Set

150533413
1971TAV021MSENSP: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-181-0513
Loop Clamp

151810513
42099078: RNCC: 3 | RNVC: 2
(241)A424942099078: RNCC: 5 | RNVC: 2

8 Oct 2008

5340-15-205-4376
Mounting Bracket

152054376
STAFFA ABTUS BT815: RNCC: 3 | RNVC: 2
(241)AJ873STAFFAABTUSBT815: RNCC: 5 | RNVC: 2

9 Mar 2012

5340-15-001-8419
Mounting Bracket

150018419
500424403: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-059-7396
Screw Thread Insert

150597396
1182-20427: RNCC: 3 | RNVC: 2

5 Feb 1976

5340-15-113-7127
Rod End Clevis

151137127
254000069: RNCC: 3 | RNVC: 2
9926283: RNCC: 5 | RNVC: 2

10 Feb 1992

5340-15-181-1914
Mounting Bracket

151811914
120020353: RNCC: 3 | RNVC: 2

12 Nov 2008

5340-15-116-4772
Butt Hinge Leaf

151164772
60149382: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-116-4826
Angle Bracket

151164826
60169432: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-163-3929
Mounting Plate

151633929
9819249: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-100-8098
Butt Hinge Leaf

151008098
109-0640-50-144: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-15-186-7581
Loop Clamp

151867581
879 2363 ED54-4237: RNCC: 3 | RNVC: 2

5 Jan 2009

5340-15-002-6554
Access Cover

150026554
DIALBC: RNCC: 3 | RNVC: 2

17 Sep 2013

5340-15-203-5875
Access Door Hinge

152035875
MASCM24400518R: RNCC: 3 | RNVC: 2
(241)AJ925MASCM24400518R: RNCC: 5 | RNVC: 2
MASCM24400518R: RNCC: 5 | RNVC: 2

20 Jun 2011

5340-15-151-2661
Angle Bracket

151512661
00084972: RNCC: 3 | RNVC: 2

4 May 2000

5340-15-162-4040
Spring Tension Clip

151624040
1460.022: RNCC: 3 | RNVC: 2

16 Aug 2001

5340-15-008-6117
Plug Button

150086117
4309331: RNCC: 3 | RNVC: 2
81464: RNCC: 5 | RNVC: 2

27 Mar 1981

5340-15-186-9099
Mounting Bracket

151869099
858325: RNCC: 3 | RNVC: 2
858325: RNCC: 5 | RNVC: 9

5 Jan 2009

5340-15-062-9246
Retaining Strap

150629246
0-101687: RNCC: 3 | RNVC: 2

28 Aug 1981

5340-15-162-2621
Access Cover

151622621
234-44: RNCC: 3 | RNVC: 2
234-44: RNCC: 5 | RNVC: 9

17 May 2001

5340-15-119-3810
Loop Clamp

151193810
61597708: RNCC: 3 | RNVC: 2

13 Aug 1999

5340-15-118-7558
Rod End Connector

151187558
9435137: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-114-0179
Access Cover

151140179
5110800: RNCC: 3 | RNVC: 2

15 Apr 1992

5340-15-118-1956
Loop Clamp

151181956
10418101: RNCC: 3 | RNVC: 2

22 Apr 1994

5340-15-061-8151
Retaining Strap

150618151
0-100502: RNCC: 3 | RNVC: 2

30 Nov 1982

5340-15-001-8399
Mounting Bracket

150018399
500439144: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-187-8257
Mounting Bracket

151878257
018.067.00.38: RNCC: 3 | RNVC: 2
(241)A6479018.067.00.38: RNCC: 5 | RNVC: 2
018.067.00.38: RNCC: 5 | RNVC: 2

7 May 2009

5340-15-009-1401
Loop Clamp

150091401
1-04498-90: RNCC: 3 | RNVC: 2
0-950021: RNCC: 5 | RNVC: 2
10449890: RNCC: 5 | RNVC: 2

22 Sep 1979

Load More Results