What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 39 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 39 of 72

5340-15-157-4318
Bocchettone Di Rifo

151574318
20210302A-33: RNCC: 3 | RNVC: 2
CTR: RNCC: 5 | RNVC: 2

14 Jul 2003

5340-15-206-7996
Utility Resilient Mount

152067996
H48-127-80-110-10FF: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-116-9611
Panel

151169611
W019443: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-051-4200
Squadra

150514200
4506602: RNCC: 3 | RNVC: 2
4506602: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-214-9732
Tappo Fermatapparel

152149732
TAPPOFERMATAPPARELLACORTO: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-156-2008
Base

151562008
(241)A3460CBD71151P01: RNCC: 3 | RNVC: 2
CBD71151P01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-213-6537
Chiavistello In Fer

152136537
CHIAVISTELLODA15: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-169-3014
Padlock

151693014
F72010395: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-055-5758
Dado Esagonale

150555758
938308K: RNCC: 3 | RNVC: 2
183808: RNCC: 5 | RNVC: 2

30 Jun 1999

5340-15-112-8299
Fondello

151128299
467102: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-151-9708
Supporto Valvola

151519708
PDM221: RNCC: 3 | RNVC: 2

31 Jul 2000

5340-15-058-8870
Dust And Moisture Seal Protective Plug

150588870
10-101964-083: RNCC: 3 | RNVC: 2

30 Dec 1974

5340-15-119-6784
Dust And Moisture Seal Protective Cap-Plug

151196784
835404-10: RNCC: 3 | RNVC: 2
835404-10: RNCC: 5 | RNVC: 9

19 Oct 1994

5340-15-213-7605
Maniglia Antipanico

152137605
0707728: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-074-4062
Turnbuckle

150744062
1B36UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-063-3228
Double Angle Bracket

150633228
60108060: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-000-4827
Sealing Plug Assembly

150004827
71466950: RNCC: 3 | RNVC: 2
71466950: RNCC: 5 | RNVC: 2

11 Mar 2013

5340-15-209-4977
Fischer

152094977
S10: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-187-5514
Spacing Threaded Standoff

151875514
RAK-0332/01: RNCC: 3 | RNVC: 2

9 Apr 2009

5340-15-122-2342
Te Inferieur

151222342
8A0067411: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-116-8596
Cilindro Fondello

151168596
D0467184: RNCC: 3 | RNVC: 2

8 Apr 1994

5340-15-156-3692
Oil Filter Plug

151563692
(241)A3460CBD71340G01: RNCC: 3 | RNVC: 2
CBD71340G01: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-000-4702
Supporto Universale

150004702
RPAU: RNCC: 3 | RNVC: 2

7 Mar 2013

5340-15-106-3223
Staffa

151063223
4639740: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-213-0895
Coppia Maniglia For

152130895
MANIGLIA-YALE: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-203-1931
Welded Plate

152031931
12HJ04343435S01-417: RNCC: 3 | RNVC: 2

28 Nov 2007

5340-15-001-8065
Spacing Threaded Standoff

150018065
500425388: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-064-7273
Threaded End Tensioning Tie Rod

150647273
1389700: RNCC: 3 | RNVC: 2

17 Nov 1983

5340-15-221-6971
Serratura Iseo

152216971
5340RI0991892: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-109-1988
Contenitorestagno

151091988
CV: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-116-8605
Cilindro Coperchio

151168605
D1402593: RNCC: 3 | RNVC: 2

8 Apr 1994

5340-15-113-2673
Insieme Bilancieri

151132673
06.572: RNCC: 3 | RNVC: 2
06.572: RNCC: 3 | RNVC: 2

19 Jun 1991

5340-15-118-5476
Shock Mount Pad

151185476
D0475445: RNCC: 3 | RNVC: 2

10 Jan 1995

5340-15-050-4124
Piastrina

150504124
70425PP4: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-110-2816
Plate 110X1

151102816
P135219-001: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-059-2283
Doppio Cilindrico

150592283
1971-037SN: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-107-6091
Double Angle Bracket

151076091
A72326-01-20: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-066-4678
Threaded End Tensioning Tie Rod

150664678
64103-101A1: RNCC: 3 | RNVC: 2

23 Jan 1986

5340-15-151-2831
Access Door

151512831
541-16-0170: RNCC: 2 | RNVC: 3
541160170: RNCC: 3 | RNVC: 2
554116017000: RNCC: 5 | RNVC: 2

8 Jun 2000

5340-15-204-0459
Connector Standard

152040459
C160002000: RNCC: 3 | RNVC: 2

23 Aug 2011

5340-15-202-7545
Pivoting Bracket

152027545
2511: RNCC: 3 | RNVC: 2
(241)A49912511: RNCC: 5 | RNVC: 2

4 Jul 2007

5340-15-119-6177
Resilient Mount

151196177
6E900: RNCC: 3 | RNVC: 2

25 Mar 1995

5340-15-118-2607
Shock Mount Pad

151182607
D1409813: RNCC: 3 | RNVC: 2

10 Apr 1995

5340-15-177-3661
Manual Control Handle

151773661
012713AA: RNCC: 3 | RNVC: 2
V01368: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-109-4716
Dust And Moisture Seal Protective Cap

151094716
1Q 315417: RNCC: 3 | RNVC: 2
1Q 315417: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-144-2065
Molla

151442065
105-14-12-031-03: RNCC: 3 | RNVC: 2
10514-12031-03-11: RNCC: 3 | RNVC: 2
105-14-12-031-03: RNCC: 5 | RNVC: 9
10514-12031-03-11: RNCC: 5 | RNVC: 9

11 Dec 1996

5340-15-113-8141
Dust And Moisture Seal Protective Cover

151138141
772613 D: RNCC: 3 | RNVC: 2

1 Apr 1998

5340-15-116-1815
Tassello

151161815
180508124: RNCC: 3 | RNVC: 2

24 Mar 1993

5340-15-187-4474
Bon Doorassy

151874474
109-0641-36-319: RNCC: 3 | RNVC: 2

31 Mar 2009

5340-15-155-8873
Sostegno Elastico

151558873
MG-DNP-20: RNCC: 3 | RNVC: 2

13 Sep 2002

5340-15-107-1867
Bracket

151071867
C7258-W3-C1: RNCC: 3 | RNVC: 2
C7258-W3-C1: RNCC: 5 | RNVC: 2
C7258-W3-C1: RNCC: 5 | RNVC: 9

10 Apr 1989

5340-15-166-4995
Hinge Half

151664995
216A8005001: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-153-5174
Access Door

151535174
142010882: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-074-4280
Turnbuckle

150744280
1A10UNI20200T60-2012A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-120-6912
Coperchio Portamoll

151206912
D0470424: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-181-0714
Protection Net

151810714
N925G1568201: RNCC: 3 | RNVC: 2

15 Oct 2008

5340-15-071-6493
Resilient Mount

150716493
310: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-109-3437
Rotating Shaft Eye Bracket

151093437
010149: RNCC: 3 | RNVC: 2
10149: RNCC: 3 | RNVC: 2

25 Nov 1992

5340-15-187-2179
Webbing Strap

151872179
179202014: RNCC: 3 | RNVC: 2
(241)A0199179202014: RNCC: 5 | RNVC: 2

25 Feb 2009

5340-15-155-4978
Handwheel

151554978
CBD70794P08: RNCC: 3 | RNVC: 2

28 Mar 2002

5340-15-123-9061
Semifascetta

151239061
42045526: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-116-8584
Supporto Leva Di Ma

151168584
D0469752: RNCC: 3 | RNVC: 2

8 Apr 1994

5340-15-217-5597
Carrucola

152175597
EXRI7903954: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-115-5730
Resilient Mount

151155730
4880267: RNCC: 3 | RNVC: 2

5 Dec 1992

5340-15-104-8918
Fissaggio Gaffetta

151048918
750/73: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-148-7082
Dust And Moisture Seal Protective Cap

151487082
W030507A: RNCC: 3 | RNVC: 2

28 Sep 1998

5340-15-062-2928
Tirante Speciale

150622928
8290179: RNCC: 3 | RNVC: 2

12 Oct 1980

5340-15-005-4056
Cover Plate Access

150054056
1137-16-177: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-113-0139
Mensola Complessivo

151130139
38904816000: RNCC: 3 | RNVC: 2
93155266: RNCC: 5 | RNVC: 2

23 Feb 1989

5340-15-153-7400
Headless Straight Rod

151537400
142061126: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-157-9558
Manicotto A Gomito

151579558
999-8001-17-514: RNCC: 3 | RNVC: 2

2 Dec 2003

5340-15-009-2134
Rubber Bumper

150092134
212-4100-16-3: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-156-3347
Removal Drift Assy

151563347
(241)A3460CBD71239G01: RNCC: 3 | RNVC: 2
CBD71239G01: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-15-179-1765
Listel

151791765
RS 417 891 A: RNCC: 3 | RNVC: 2

13 Jun 2006

5340-15-150-4539
Dust And Moisture Seal Protective Cap

151504539
8246.00.40: RNCC: 3 | RNVC: 2

13 Dec 1999

5340-15-193-9088
Sealing Plug Assembly

151939088
222527: RNCC: 3 | RNVC: 2
(241)AJ222222527: RNCC: 5 | RNVC: 2

27 Jul 2010

5340-15-118-6279
Mounting Kit

151186279
463T010016: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-216-4213
Lucchetti Speciali

152164213
ART377: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-162-7784
Castor Wheel

151627784
67050100: RNCC: 3 | RNVC: 2

22 Feb 2002

5340-15-113-3497
Dispositivochiusura

151133497
4-22969.0002//D: RNCC: 5 | RNVC: 2
4-22969.0002//D: RNCC: 5 | RNVC: 9

11 Feb 1991

5340-15-118-0342
Piastrina Di Antisv

151180342
D0467946: RNCC: 3 | RNVC: 2

1 Dec 1994

5340-15-056-3152
Distanziatore

150563152
69567C31: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-206-5894
Micro Holder

152065894
TYPE MAI: RNCC: 3 | RNVC: 2
(241)A9712TYPE MAI: RNCC: 5 | RNVC: 2

26 Jun 2012

5340-15-212-5978
Rullo In Poliuteran

152125978
RS858-770: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-113-9700
Manigliaspeciale

151139700
262A1242-001: RNCC: 3 | RNVC: 2

31 Mar 1992

5340-15-113-0848
Sostegno Bo Cinghia

151130848
94298-001: RNCC: 3 | RNVC: 2

9 May 1991

5340-15-122-1406
Arm Saddle

151221406
A-39171-001: RNCC: 3 | RNVC: 2
A39171-001: RNCC: 3 | RNVC: 2

21 May 1996

5340-15-003-8961
Stand Base

150038961
182707172: RNCC: 3 | RNVC: 2
(241)A0199182707172: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-210-5704
Piastrina Di Blocca

152105704
269019P1: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-116-8533
Cilindro Coperchio

151168533
D1402636: RNCC: 3 | RNVC: 2

6 Apr 1994

5340-15-116-0236
Threaded End Tensioning Tie Rod

151160236
03-3827-002: RNCC: 3 | RNVC: 2

16 Sep 1993

5340-15-147-5161
Protezione Molla

151475161
31630-001: RNCC: 5 | RNVC: 2
31630-001: RNCC: 5 | RNVC: 9
31630-001: RNCC: 5 | RNVC: 9

12 Dec 1997

5340-15-206-2609
Key Blank

152062609
VIRO-VI084: RNCC: 3 | RNVC: 2

1 Jun 2012

5340-15-145-1727
Bracket

151451727
4-29800.0000//C: RNCC: 5 | RNVC: 2
4-29800.0000//C: RNCC: 5 | RNVC: 9

2 Jun 1997

5340-15-178-9909
Plate

151789909
RS 304 660 A: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-216-3143
Turnbuckle

152163143
071392155: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-211-0381
Prolunga Elettrica

152110381
PROLUNGA10MT: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-109-6857
Coperchio

151096857
61889: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-074-4065
Turnbuckle

150744065
1B52UNI2018A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-157-3911
Half-Hinge

151573911
190509317: RNCC: 2 | RNVC: 3

4 Jul 2003

5340-15-112-8284
Fodera

151128284
467186: RNCC: 3 | RNVC: 2
D0467186: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-109-3772
Electrical-Me Post

151093772
5137-263-11: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-115-3388
Panel Duct

151153388
910-5066-033: RNCC: 3 | RNVC: 2
82-01772: RNCC: 5 | RNVC: 2

29 Nov 1992

5340-15-148-9747
El Handwheel

151489747
F01A02801P01: RNCC: 3 | RNVC: 2
600-4031-084: RNCC: 5 | RNVC: 2

9 Nov 1998

5340-15-121-5306
Electrical-Me Post

151215306
102.531/D/13: RNCC: 3 | RNVC: 2

24 May 1996

5340-15-055-8626
Dust And Moisture Seal Protective Plug

150558626
205-9-129: RNCC: 3 | RNVC: 2
205-9-129: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-219-7462
Riscontro Elettrico

152197462
12V162P: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-169-3015
Padlock

151693015
F72010395: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-154-9310
Protective Cover

151549310
CBD71010P01: RNCC: 3 | RNVC: 2

13 Nov 2001

5340-15-231-8281
Tappo

152318281
42489718: RNCC: 3 | RNVC: 2
534015E064427: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-041-2817
Ammortizzatore

150412817
N86890T16862: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-201-4095
Assieme Attrezzatur

152014095
21H006A5392-801: RNCC: 3 | RNVC: 2
(241)A2142-21H006A5392-801: RNCC: 5 | RNVC: 2

23 Aug 2006

5340-15-166-4951
Tappo A Pressione

151664951
369D265701025: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-186-2224
Serratura Da Infila

151862224
MM70-MM16-54/C: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-126-5877
Molla

151265877
T2A32: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-156-3927
Seal S19 Base Assy

151563927
CBD71347G01: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-153-9292
Handwheel

151539292
L152/70A-6: RNCC: 3 | RNVC: 2
142016209: RNCC: 5 | RNVC: 2

12 Mar 2001

5340-15-179-1737
Flange

151791737
RS 417 799 A: RNCC: 3 | RNVC: 2

13 Jun 2006

5340-15-062-8987
Staffetta Speciale

150628987
0-56022: RNCC: 3 | RNVC: 2

11 Mar 1982

5340-15-106-2029
Comando Impugnatura

151062029
7594: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-066-4993
Manopola Speciale

150664993
B0024/R16: RNCC: 3 | RNVC: 2

1 Mar 1986

5340-15-115-6098
Quadrante Lancietta

151156098
D0468449: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-210-7012
Linguetta Arrotonda

152107012
UNI6604-6X6X32: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-231-8346
Staffa Fissa

152318346
93194819: RNCC: 3 | RNVC: 2
534015E070082: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-058-5494
Electrical-Me Post

150585494
112098: RNCC: 3 | RNVC: 2

20 Nov 1974

5340-15-178-9875
Cover Assembly

151789875
RS 201 105 AU: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-231-6967
Gancio

152316967
4952067: RNCC: 3 | RNVC: 2
534015E088107: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-149-1178
Double Angle Bracket

151491178
60187288: RNCC: 3 | RNVC: 2

2 Dec 1998

5340-15-187-4526
Assy Plug

151874526
14899-403: RNCC: 3 | RNVC: 2
(241)A001914899-403: RNCC: 5 | RNVC: 2

1 Apr 2009

5340-15-110-7974
Protezionepomello

151107974
96202-001A00: RNCC: 3 | RNVC: 2
96202-001: RNCC: 5 | RNVC: 2

21 Jul 1990

5340-15-113-9694
Escutcheon Plate

151139694
252A3071-001: RNCC: 3 | RNVC: 2

31 Mar 1992

5340-15-115-2808
Bushing

151152808
518053130: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-064-5867
Helical Compression Spring Seat

150645867
4606936: RNCC: 3 | RNVC: 2

17 Nov 1983

5340-15-134-2500
Clip A Ventosa

151342500
P79D1469: RNCC: 3 | RNVC: 2
P79D1469: RNCC: 5 | RNVC: 9

9 Oct 1996

5340-15-153-9057
Shock Mount Pad

151539057
00084236: RNCC: 3 | RNVC: 2
(241)A333400084236: RNCC: 4 | RNVC: 1
9423T6: RNCC: 5 | RNVC: 2

9 Mar 2001

5340-15-051-4856
Dust And Moisture Seal Protective Cap

150514856
A52965: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-051-2805
Nut And Bolt Retainer

150512805
4548111: RNCC: 3 | RNVC: 2
4548111: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-105-8508
Double Angle Bracket

151058508
8983455: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-105-8193
Resilient Mount

151058193
80416: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-138-4885
Tassello

151384885
5983731: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-102-8092
Testa Di Tirante Fi

151028092
232A4501-405: RNCC: 3 | RNVC: 2

27 Oct 1988

5340-15-231-8760
Fermo Staffa

152318760
93940249: RNCC: 3 | RNVC: 2
534015E094787: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-065-7291
Sadd Pipe Support

150657291
109-0616-65-5: RNCC: 3 | RNVC: 2

16 Dec 1984

5340-15-117-0387
Cap Filler

151170387
TM450G65: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-117-7788
Resilient Mount

151177788
1Q 312617: RNCC: 3 | RNVC: 2
1Q 312617: RNCC: 5 | RNVC: 9

18 Oct 1994

5340-15-157-9822
Hinge Assy

151579822
J94345361-401: RNCC: 3 | RNVC: 2

14 Dec 2003

5340-15-120-6877
Piastra Per Quadro

151206877
D0471514: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-118-0400
Premiguarnizione

151180400
D0484597: RNCC: 3 | RNVC: 2

18 Nov 1994

5340-15-233-7673
Serratura Triplice

152337673
3850: RNCC: 3 | RNVC: 2
534015E025884: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-154-1813
Attacco

151541813
133634: RNCC: 3 | RNVC: 2

27 Mar 2001

5340-15-102-3422
Maniglia Ribaltabil

151023422
IR-412/90S-26: RNCC: 3 | RNVC: 2

19 Jul 1988

5340-15-118-6410
Plate

151186410
35 05 037 001: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-113-5691
Seat Pipe Support

151135691
05010-001: RNCC: 3 | RNVC: 2

14 Jan 1992

5340-15-112-8734
Helical Compression Spring Seat

151128734
9980894: RNCC: 3 | RNVC: 2
1270203000: RNCC: 5 | RNVC: 2

20 Apr 1988

5340-15-166-4808
Fascetta

151664808
69R013P001F: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-179-0004
Container Welded

151790004
RS 411 785 AE: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-120-6942
Coperchio Di Guida

151206942
D0467692: RNCC: 3 | RNVC: 2

8 May 1996

5340-15-113-2542
Complessivo Flangia

151132542
377A2050-405: RNCC: 3 | RNVC: 2

15 Apr 1991

5340-15-196-6310
Padlock

151966310
PN UAS 00019419: RNCC: 3 | RNVC: 2
5340F76023280: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-050-0044
Fascia Metallica Id

150500044
71028-11: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-115-8470
Slide

151158470
230800P1: RNCC: 3 | RNVC: 2
71-01-001-085: RNCC: 3 | RNVC: 2

1 Feb 1993

5340-15-118-0319
Supporto Portaguarn

151180319
D0467444: RNCC: 3 | RNVC: 2

1 Dec 1994

5340-15-050-9715
Inserto

150509715
VU3030P1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-138-2943
Fermo

151382943
11063876: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-175-9440
Maniglione Antipani

151759440
59135-10-2: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-205-8828
Assieme Forcella

152058828
9AA4020A018-401: RNCC: 3 | RNVC: 2
(241)A21429AA4020A018-401: RNCC: 5 | RNVC: 2

12 Apr 2012

5340-15-108-8932
Control Rod

151088932
771327: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-115-7028
Semiguscio Sferico

151157028
D1401115: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-114-8793
Commutatorethumbwel

151148793
67511-71/015: RNCC: 3 | RNVC: 2

1 Sep 1992

5340-15-195-4134
Cinghia

151954134
200800007.15500: RNCC: 3 | RNVC: 2
(241)A6114200800007.15500: RNCC: 5 | RNVC: 2

21 Mar 2011

5340-15-185-7148
Confezione Fischer

151857148
00262: RNCC: 3 | RNVC: 2
(241)A602800262: RNCC: 5 | RNVC: 2

30 Dec 2008

5340-15-003-0063
Anello

150030063
705723: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-157-0874
Resilient Mount

151570874
25081: RNCC: 3 | RNVC: 2
51005706A: RNCC: 3 | RNVC: 2

5 May 2003

5340-15-202-2315
Rod Assy

152022315
233A1003-407: RNCC: 3 | RNVC: 2
(241)A0019233A1003-407: RNCC: 5 | RNVC: 2

13 Feb 2007

5340-15-189-0927
Saldato Mensola

151890927
195531804: RNCC: 3 | RNVC: 2
(241)A0199195531804: RNCC: 5 | RNVC: 2

27 Jan 2010

5340-15-138-6263
Tirante

151386263
9936039: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-074-4045
Turnbuckle

150744045
2A64UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-198-7861
Pipe Bracket

151987861
4800588: RNCC: 3 | RNVC: 2

17 Nov 2004

5340-15-170-5698
Hadle For Expandabl

151705698
805-4901-006: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-15-002-7718
Housing Stop

150027718
4232163-01: RNCC: 3 | RNVC: 2

1 Oct 2013

5340-15-136-2342
Staffa Per Marmitta

151362342
4082875: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-074-4110
Turnbuckle

150744110
1C56UNI2018A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-074-4080
Turnbuckle

150744080
2B22UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-052-4447
Resilient Mount

150524447
914-4-4-27-06727-006: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-152-8177
Sostegno Elastico

151528177
P300103: RNCC: 3 | RNVC: 2

27 Oct 2000

5340-15-199-6677
Shock Mount Pad

151996677
42073324: RNCC: 3 | RNVC: 2
(241)A424942073324: RNCC: 5 | RNVC: 2

17 May 2005

5340-15-102-9011
Accesso Coperchio

151029011
1P526890: RNCC: 3 | RNVC: 2
1P526890: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-166-4987
Hinge Half

151664987
216A8022001: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-202-8534
Rod

152028534
J28040664-001: RNCC: 3 | RNVC: 2

26 Jul 2007

5340-15-222-2264
Pannello 1020X1020

152222264
S1-125: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-116-7484
Hardware Kit Mechan

151167484
538-04-1560: RNCC: 3 | RNVC: 2

24 Jun 1993

5340-15-118-0867
Control Rod

151180867
D0467498: RNCC: 3 | RNVC: 2

16 Dec 1994

5340-15-118-0454
Supporto Leva Di Co

151180454
D0487992: RNCC: 3 | RNVC: 2

18 Nov 1994

5340-15-066-1735
Handle

150661735
P-894833-003: RNCC: 3 | RNVC: 2
P894833-003: RNCC: 5 | RNVC: 2

10 Feb 1986

5340-15-122-2936
Fourreau Fourche

151222936
800075095: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-202-2774
Fascetta Fissaggio

152022774
17316992: RNCC: 3 | RNVC: 2
(241)A424917316992: RNCC: 5 | RNVC: 2

19 Feb 2007

5340-15-180-8615
Staffa

151808615
113081113: RNCC: 3 | RNVC: 2
(241)A0199113081113: RNCC: 5 | RNVC: 2

29 Jul 2008

5340-15-120-6827
Piastra Di Distribu

151206827
D0486870: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-120-8200
Flangia Per Indicat

151208200
118632: RNCC: 3 | RNVC: 2

4 Jul 1996

5340-15-151-9588
Piastra

151519588
0-157139: RNCC: 3 | RNVC: 2
00157139: RNCC: 3 | RNVC: 2
(241)A39630-157139: RNCC: 5 | RNVC: 2

27 Jul 2000

5340-15-065-6014
Rullo Di Scorriment

150656014
109-0700-52-1: RNCC: 3 | RNVC: 2

16 Dec 1984

5340-15-114-0243
Helical Compression Spring Seat

151140243
7984616: RNCC: 3 | RNVC: 2

15 Apr 1992

5340-15-107-2334
Attacco A Cerniera

151072334
13891-101: RNCC: 3 | RNVC: 2
13891-101: RNCC: 5 | RNVC: 9

22 Mar 1988

5340-15-146-6951
Plug

151466951
907-12AT-TCU/16: RNCC: 3 | RNVC: 2

18 Aug 1997

5340-15-060-1574
Access Cover Plate

150601574
1376-19-274: RNCC: 3 | RNVC: 2
137619274: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-213-8850
Maniglione Antipani

152138850
941-4-000-505: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-205-4940
Dust And Moisture Seal Protective Cap

152054940
182719406: RNCC: 3 | RNVC: 2
(241)A0199182719406: RNCC: 5 | RNVC: 2

14 Mar 2012

5340-15-187-5449
Spacing Threaded Standoff

151875449
E5533.0000: RNCC: 3 | RNVC: 2

9 Apr 2009

5340-15-136-1006
Cerniera

151361006
4632962: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-061-1757
Rim Clen Clamp (1)

150611757
1200096-111320008: RNCC: 5 | RNVC: 2
000200099700: RNCC: 5 | RNVC: 2
000200099700: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-101-5121
Blocchetto

151015121
206-1015-59-3: RNCC: 3 | RNVC: 2

27 Jul 1987

5340-15-214-5029
Ancorante Inox 10X1

152145029
51041: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-215-3923
Maniglia Porta Cabi

152153923
1012012: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-120-6710
Control Rod

151206710
D0473202: RNCC: 3 | RNVC: 2

28 Jun 1996

5340-15-154-8568
Dust Protective Cap

151548568
836600/93: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-15-120-1308
Deperditeur

151201308
17065: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-15-145-0120
Turnbuckle

151450120
112715899: RNCC: 3 | RNVC: 2

12 May 1997

5340-15-134-3730
Mezza Cerniera Este

151343730
04152-101A1: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-127-3644
Molla

151273644
835747: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-221-0682
Cerniere

152210682
213: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-148-6646
Detent Plunger

151486646
190540153: RNCC: 3 | RNVC: 2

17 Sep 1998

5340-15-115-0366
Levadiaggancio

151150366
W012301: RNCC: 3 | RNVC: 2
(7001)5340151150366: RNCC: 5 | RNVC: 2

8 Oct 1993

5340-15-117-9175
Maniglia Interna Te

151179175
263A1005-403: RNCC: 3 | RNVC: 2

31 Jan 1994

5340-15-162-3249
Tank Band Assembly

151623249
159308: RNCC: 3 | RNVC: 2
47159308: RNCC: 5 | RNVC: 2

27 Jun 2001

5340-15-112-8413
Blocchettop

151128413
466558: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-151-5321
Maniglia

151515321
0-103509: RNCC: 3 | RNVC: 2
(241)A39630-103509: RNCC: 5 | RNVC: 2
1PA39630-103509: RNCC: 5 | RNVC: 2

6 Jun 2000

5340-15-189-6472
Serratura Sicurezza

151896472
57120-60-2-00QH: RNCC: 3 | RNVC: 2

26 Feb 2010

5340-15-216-5106
Grillo Collegamento

152165106
GRILLOCOLLEG: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-215-4073
Cerniera Zincata Fa

152154073
ART.435: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-109-8495
Assieme Supporto

151098495
220322/5: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-147-1622
Supporto Connettori

151471622
F8799.0000: RNCC: 5 | RNVC: 2
F8799.0000: RNCC: 5 | RNVC: 9

1 Oct 1997

5340-15-138-3086
Tassello

151383086
14202685: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-156-3910
Centering Ring

151563910
CBD71355P02: RNCC: 3 | RNVC: 2
(241)A3460CBD71355P02: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-109-3448
Coperchio Di Access

151093448
03-06-255-8: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-118-0429
Piastrino Ritegno

151180429
D0484636: RNCC: 3 | RNVC: 2

5 Dec 1994

5340-15-062-5278
Cover Plate Access

150625278
1113-17-907: RNCC: 3 | RNVC: 2

2 Dec 1981

5340-15-139-3764
Staffa

151393764
42050113: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-180-9162
Avio Hinge Assembly

151809162
N925G9224101: RNCC: 3 | RNVC: 2

7 Aug 2008

5340-15-120-6788
Blocchetto Attacco

151206788
D0491788: RNCC: 3 | RNVC: 2

10 Jul 1996

5340-15-142-0352
Supporto

151420352
W011584: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-155-8247
Sensor Bracket

151558247
4111T45G01: RNCC: 3 | RNVC: 2
4111T45G01: RNCC: 3 | RNVC: 2

11 Jul 2002

5340-15-116-7532
Bracket Mounting

151167532
532610595: RNCC: 3 | RNVC: 2
532610595: RNCC: 5 | RNVC: 2

24 Jun 1993

5340-15-101-7438
Piastra Forata

151017438
P9: RNCC: 3 | RNVC: 2

4 Feb 1994

5340-15-115-2750
Guide

151152750
518051920: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-163-3004
Vo Hebelgruppe

151633004
4896.360: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-166-5163
Unita' Antivibrante

151665163
PC540187: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-216-4926
Gancio

152164926
554T42: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-181-1707
Rizza

151811707
178950126: RNCC: 3 | RNVC: 2
(241)A0199178950126: RNCC: 5 | RNVC: 2

5 Nov 2008

5340-15-135-9485
Maglietta

151359485
53309: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-201-4144
Staffa Di Fissaggio

152014144
504052658: RNCC: 3 | RNVC: 2
(241)A4249504052658: RNCC: 5 | RNVC: 2

24 Aug 2006

5340-15-055-6222
Staffa

150556222
721725: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-118-0413
Manicotto Condotti

151180413
D0484626: RNCC: 3 | RNVC: 2

18 Nov 1994

5340-15-128-5139
Escutcheon Plate

151285139
NEF1005: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-137-0851
Fascetta

151370851
66220: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-118-6098
Plaque

151186098
73132530: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-065-1362
Hinge

150651362
P-853070-001: RNCC: 3 | RNVC: 2
P853070-001: RNCC: 5 | RNVC: 2

15 Feb 1985

5340-15-066-1300
Strip Refer

150661300
P-883010-003: RNCC: 3 | RNVC: 2
P883010-003: RNCC: 5 | RNVC: 2

10 Feb 1986

5340-15-049-3517
Fascetta

150493517
7-4422-1-01-36068: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-199-5030
Supporto Per Microi

151995030
1Q 605079: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-15-154-6056
Turnbuckle Body

151546056
157608209: RNCC: 2 | RNVC: 3

26 Jul 2001

5340-15-109-8981
Assieme Piastrina

151098981
568065: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-122-2683
Fond De Jante Arrie

151222683
800043303: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-109-9010
Sfera

151099010
588268: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-118-0436
Protezione Per Prem

151180436
D0487577: RNCC: 3 | RNVC: 2

5 Dec 1994

5340-15-213-8862
Maniglia Per Porton

152138862
482IBFM: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-213-8570
Cerniera In Ottone

152138570
CERNIERA3,5X100: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-159-9443
Dashpot

151599443
552610125000: RNCC: 3 | RNVC: 2

15 Apr 2004

5340-15-219-3030
Lucchetto Mm50

152193030
0340/50: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-166-5010
Lh (Spare Par Hinge

151665010
113A6022751: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-157-4953
Piastrina Di Sicure

151574953
60184145: RNCC: 3 | RNVC: 2

3 Sep 2003

5340-15-189-9703
Serrature

151899703
E340: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-166-4871
Fissacavo ( X Cavi

151664871
SCH2332GR: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-074-4358
Turnbuckle

150744358
1C39UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-116-9734
Harness

151169734
W005146: RNCC: 3 | RNVC: 2
(7001)5340151169734: RNCC: 5 | RNVC: 2

18 Nov 1997

5340-15-057-4111
Electrical-Me Post

150574111
770071K: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-006-9313
Control Rod

150069313
506-25-07A: RNCC: 3 | RNVC: 2
(7001)1680150069313: RNCC: 5 | RNVC: 2
(241)A2142506-25-07A: RNCC: 5 | RNVC: 2

2 Jan 1979

5340-15-166-5040
Bracket

151665040
311A2510022: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-181-0721
Protection Net

151810721
N925G1582201: RNCC: 3 | RNVC: 2

15 Oct 2008

5340-15-101-0827
Settore Filettato

151010827
469353: RNCC: 3 | RNVC: 2

11 Jul 1996

5340-15-215-0797
Tassello Fermaporte

152150797
SA1N: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-154-1817
Albero

151541817
133735: RNCC: 3 | RNVC: 2

27 Mar 2001

5340-15-112-8344
Obturator

151128344
470437: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-112-8478
Centraggio

151128478
D0471970: RNCC: 3 | RNVC: 2
471970: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-002-2602
Pull

150022602
37285: RNCC: 3 | RNVC: 2

30 Jul 2013

5340-15-166-4845
Molla

151664845
95631633: RNCC: 3 | RNVC: 2
95631633: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-231-1146
Lucchetto Rettangol

152311146
505: RNCC: 3 | RNVC: 2
534015E136949: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-105-1754
Padlock

151051754
737681: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-104-8869
Fissaggio Gaffetta

151048869
995599: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-189-9443
Fascetta

151899443
UA29022-0AP: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-134-6308
Staffa Inferior

151346308
1379757: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-155-1179
Resilient Mount

151551179
142037221: RNCC: 3 | RNVC: 2

18 Jan 2002

5340-15-205-7081
Sportello Accesso

152057081
004.03.648: RNCC: 3 | RNVC: 2
5387.PM.08.0185: RNCC: 3 | RNVC: 2
(241)A53875387.PM.08.0185: RNCC: 5 | RNVC: 2

28 Mar 2012

5340-15-110-8589
Eye Hook

151108589
36N006P008: RNCC: 3 | RNVC: 2

10 Sep 1990

5340-15-139-5235
Fermaglio

151395235
8463857: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-115-6960
Anellino Di Centrag

151156960
D0470555: RNCC: 3 | RNVC: 2

8 Mar 1994

5340-15-196-6198
Padlock

151966198
PN UAS 00039848: RNCC: 3 | RNVC: 2
5340F76033943: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-120-2530
Copricentina Per Co

151202530
60161458: RNCC: 3 | RNVC: 2

6 Mar 1995

5340-15-201-1485
Nut And Bolt Retainer

152011485
UA22009A18P: RNCC: 3 | RNVC: 2
(241)A2142UA22009A18P: RNCC: 5 | RNVC: 2

11 Jun 2006

5340-15-139-4389
Semicerniera

151394389
4706009: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-116-0598
Threaded End Tensioning Tie Rod

151160598
1Q 503569LA: RNCC: 3 | RNVC: 2
1Q 503569LA: RNCC: 5 | RNVC: 9

12 Apr 1994

5340-15-103-4812
Dust And Moisture Seal Protective Plug

151034812
W007601: RNCC: 3 | RNVC: 2
(7001)2815151034812: RNCC: 5 | RNVC: 2

1 Apr 1998

5340-15-136-0708
Tappo

151360708
105-516: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-122-3033
Protection

151223033
D128604501: RNCC: 3 | RNVC: 2
D128604501: RNCC: 5 | RNVC: 2
D128604501: RNCC: 5 | RNVC: 2

25 Jun 1996

5340-15-200-8883
Shock Mount Pad

152008883
9731000045: RNCC: 3 | RNVC: 2
(241)A60209731000045: RNCC: 5 | RNVC: 2

26 Mar 2006

5340-15-154-0608
Copri Accesso

151540608
03-06-1211-49: RNCC: 3 | RNVC: 2

19 Mar 2001

5340-15-101-7835
Fascetta Speciale

151017835
SC32674.78S: RNCC: 3 | RNVC: 2

21 Jul 1987

5340-15-142-8568
Maniglia

151428568
10PV00006-586: RNCC: 3 | RNVC: 2
10PV00006-586: RNCC: 5 | RNVC: 9

9 Jun 1997

5340-15-218-4209
Serratura Per Profi

152184209
SERRATURAPROFILATI: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-145-2058
Handwheel

151452058
01TC22586: RNCC: 3 | RNVC: 2

2 Jun 1997

5340-15-005-1535
Strap

150051535
201C8128G2: RNCC: 3 | RNVC: 2

9 Dec 2013

5340-15-166-5091
Cap

151665091
60892: RNCC: 1 | RNVC: 2
60892: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-117-9196
Piastra Calibrata

151179196
232A1518-001: RNCC: 3 | RNVC: 2

31 Jan 1994

5340-15-200-3126
Dust And Moisture Seal Protective Plug

152003126
J55161073: RNCC: 3 | RNVC: 2

29 Nov 2005

5340-15-007-3919
Nut And Bolt Locking Plate

150073919
1395554: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-063-3203
Double Angle Bracket

150633203
60104905: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-170-9102
Manual Control Handle

151709102
71419173: RNCC: 3 | RNVC: 2
(241)AD75171419173: RNCC: 5 | RNVC: 2
71419173: RNCC: 5 | RNVC: 2

16 Jun 2003

5340-15-068-5129
Access Cover Plate

150685129
1376-63-135: RNCC: 3 | RNVC: 2
137663135: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-151-4579
Fissaggio Ascia

151514579
UOHF0130000: RNCC: 3 | RNVC: 2

29 May 2000

5340-15-116-2736
Speciale Tappo

151162736
190520108: RNCC: 3 | RNVC: 2

15 Apr 1993

5340-15-211-6312
Fermo Magnetico

152116312
403127: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-108-8009
Metal Runner

151088009
1368402: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-158-6049
Access Door

151586049
122606060: RNCC: 3 | RNVC: 2

10 Mar 2004

5340-15-166-4940
Supporto Per Chiave

151664940
559012: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-166-4971
Articula Joint Ass

151664971
324A2046403: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-139-7700
Fissaggio Gaffetta

151397700
0047013: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-178-9659
Cover

151789659
4705829: RNCC: 3 | RNVC: 2

1 Mar 2006

5340-15-138-2889
Padlock

151382889
TS4116: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-193-5012
Kit Antivibranti

151935012
ATG40X40: RNCC: 3 | RNVC: 2

24 May 2010

5340-15-148-7163
Push Rod Prote Tube

151487163
940 38: RNCC: 3 | RNVC: 2
940 38: RNCC: 5 | RNVC: 9

28 Sep 1998

5340-15-199-5129
Rubber Bumper

151995129
122512133: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-15-187-2188
Supporto Munizione

151872188
179201012: RNCC: 3 | RNVC: 2
(241)A0199179201012: RNCC: 5 | RNVC: 2

25 Feb 2009

5340-15-170-2997
Bracket

151702997
321376-P1: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-134-0286
Standard Hardware

151340286
KITANARN118: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-153-7060
Testa Di Tirante Fi

151537060
142011135: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-215-5179
Supporto Capsule

152155179
7921G: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-105-6324
Collare Serraggio

151056324
541675: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-147-3079
Bracket

151473079
302958: RNCC: 3 | RNVC: 2

31 Oct 1997

5340-15-074-4106
Turnbuckle

150744106
1C36UNI2018A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-217-5058
Recinto Zincato

152175058
6X5,40X2H: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-127-2537
Molla Richiamo

151272537
969795: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-108-9094
Supportorigido

151089094
03958-106A1: RNCC: 3 | RNVC: 2

6 Sep 1989

5340-15-204-3312
Telaio

152043312
0000500428425: RNCC: 3 | RNVC: 2
(241)A39630000500428425: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-215-3136
Artiglio Mm.500

152153136
BT1713: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-206-5633
Chiudiporta

152065633
8287160000ZM: RNCC: 3 | RNVC: 2
(241)A31218287160000ZM: RNCC: 5 | RNVC: 2

26 Jun 2012

5340-15-212-7018
Cover

152127018
H60501T23G: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-211-4394
Cinghia Tela Gommat

152114394
CTG: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-179-0242
Handwheel

151790242
66574: RNCC: 3 | RNVC: 2

15 Mar 2006

5340-15-206-1532
Molla

152061532
5340159802041: RNCC: 3 | RNVC: 2
(241)A88205340159802041: RNCC: 5 | RNVC: 2

25 May 2012

5340-15-178-4989
Dust And Moisture Seal Protective Cap

151784989
307062: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-179-0797
Utility Resilient Mount

151790797
489008: RNCC: 3 | RNVC: 2

13 Jun 2006

5340-15-207-1962
Washer Nordlock Nl2

152071962
R0038806: RNCC: 2 | RNVC: 2
(241)AG350R0038806: RNCC: 5 | RNVC: 2

20 Sep 2012

5340-15-113-2413
Staffacomplessivo

151132413
265A1040-403: RNCC: 3 | RNVC: 2

11 Apr 1991

5340-15-009-5234
Resilient Mount

150095234
9921725: RNCC: 3 | RNVC: 2
89900173: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-124-5399
Cerniera Tir Comple

151245399
93919131: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-179-2314
Key

151792314
41830440A: RNCC: 3 | RNVC: 2

10 Aug 2006

5340-15-170-9290
Vary Hardware

151709290
72102129: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-136-8360
Testa Di Forcella

151368360
S6165-20269-2: RNCC: 3 | RNVC: 2

1 Dec 1998

5340-15-215-5516
Tool Control Kit

152155516
TCK3627BR: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-156-2706
Tenditore

151562706
04010120310: RNCC: 3 | RNVC: 2
(241)A977204010120310: RNCC: 5 | RNVC: 2

20 Dec 2002

5340-15-103-1550
Control Rod

151031550
L5271027: RNCC: 3 | RNVC: 2
(241)A5015DE160.03.337: RNCC: 5 | RNVC: 2
DE160.03.337: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-008-0807
Resilient Mount

150080807
60105031: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-121-5759
Sadd Pipe Support

151215759
1R 514233: RNCC: 3 | RNVC: 2
1R 514233: RNCC: 5 | RNVC: 9

18 Sep 1996

5340-15-203-4546
Support Round Plate

152034546
N632U1042201: RNCC: 3 | RNVC: 2

4 Feb 2008

5340-15-118-1156
Helical Compression Spring Seat

151181156
1P 557235: RNCC: 3 | RNVC: 2
1P 557235: RNCC: 5 | RNVC: 9

30 Jan 1995

5340-15-104-4340
Testa Tira Forcella

151044340
10008571: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-205-5487
Ammortizzatore

152055487
182702023: RNCC: 3 | RNVC: 2
(241)A0199182702023: RNCC: 5 | RNVC: 2

19 Mar 2012

5340-15-124-8310
Staffa Anteriore Sx

151248310
93924823: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-007-2195
Eye Hook

150072195
1396275: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-105-6367
Collare Serraggio

151056367
595669: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-104-8862
Fissaggio Gaffetta

151048862
4555172: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-074-4401
Turnbuckle

150744401
1A8UNI20210T60-2012A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-138-6748
Attacco

151386748
5600-300-101: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-122-2595
Nonmetallic Bumper

151222595
800031854: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-155-5600
Com Settore Filtro

151555600
000205061400: RNCC: 3 | RNVC: 2
000205061400: RNCC: 5 | RNVC: 9

11 Apr 2002

5340-15-103-1549
Control Rod

151031549
L5271002: RNCC: 3 | RNVC: 2
(241)A5015DE160.03.336: RNCC: 5 | RNVC: 2
DE160.03.336: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-156-3339
Removal Drift Assy

151563339
CBD71230G01: RNCC: 3 | RNVC: 2
(241)A3460CBD71230G01: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-15-112-8329
Supportoperc

151128329
471259: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-074-4147
Turnbuckle

150744147
1D27UNI2018A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-170-8863
Halter Leiter Heck

151708863
TE403587: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-166-5213
Cam

151665213
1336331: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-114-7874
Guide

151147874
629.4845.181: RNCC: 3 | RNVC: 2

4 Aug 1992

5340-15-122-1613
Piastrina Di Montag

151221613
145500151: RNCC: 3 | RNVC: 2

28 May 1996

5340-15-109-5477
Sadd Pipe Support

151095477
D50: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-116-8555
Coperchio Cilindri

151168555
D1402632: RNCC: 3 | RNVC: 2

8 Apr 1994

5340-15-118-0068
Helical Compression Spring Seat

151180068
1P 548216: RNCC: 3 | RNVC: 2
1P 548216: RNCC: 5 | RNVC: 9

28 Jan 1995

5340-15-108-8021
Helical Compression Spring Retainer

151088021
1390750: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-139-2852
Cinghia

151392852
155019: RNCC: 3 | RNVC: 2
155019: RNCC: 5 | RNVC: 9

10 Oct 1996

5340-15-220-0694
Latch Assy (Valido

152200694
263A1866-403: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-179-1899
Manual Control Handle

151791899
VKIC25REP2: RNCC: 3 | RNVC: 2

13 Jun 2006

5340-15-170-3255
Handle

151703255
60.0315.84: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-074-4227
Turnbuckle

150744227
2C16UNI2019AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-060-8254
Folding Stay

150608254
023200179100: RNCC: 5 | RNVC: 2
023200179100: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-230-2486
Staffa

152302486
58561F01: RNCC: 3 | RNVC: 2
534015E123221: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-074-4069
Turnbuckle

150744069
1B76UNI2018A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-135-9887
Biscottino

151359887
8552633: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-118-8341
Nut And Bolt Locking Plate

151188341
9449202: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-157-6250
Headless Straight Rod

151576250
11032210: RNCC: 3 | RNVC: 2
(241)A977211032210: RNCC: 5 | RNVC: 2

9 Oct 2003

5340-15-180-3953
Corrosion Preventive Anode

151803953
5852527901ZM: RNCC: 3 | RNVC: 2
(241)A31215852527901ZM: RNCC: 5 | RNVC: 2

8 May 2008

5340-15-216-1759
Driving Dog (X2)

152161759
4146: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-139-8030
Grillo

151398030
1001902: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-142-6284
Antivibrante

151426284
25610010A: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-157-6163
Handwheel

151576163
11031307: RNCC: 3 | RNVC: 2
(241)A977211031307: RNCC: 5 | RNVC: 2

9 Oct 2003

5340-15-118-6046
Calotte

151186046
73133616: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-166-5001
Hinge Half

151665001
216A0007003: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-136-8064
Tappo

151368064
MV0386: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-127-0906
Staffetta Fiss.Tubo

151270906
379374: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-110-7281
Extension Drawer Slide

151107281
MC700802: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-045-3907
Fascetta

150453907
N0R2-505-06-40A: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-005-9970
Piastra Distanziatr

150059970
20004-029-01: RNCC: 3 | RNVC: 2

11 Aug 1979

5340-15-147-0639
Resilient Mount

151470639
28.65.97.40: RNCC: 3 | RNVC: 2

21 Aug 1997

5340-15-174-9048
Ammortizzatore

151749048
145511922: RNCC: 3 | RNVC: 2

17 Oct 2003

5340-15-103-3676
Chiusura Laterale

151033676
SR 2153: RNCC: 3 | RNVC: 2

22 Mar 1988

5340-15-118-0480
Mensola Supporto Se

151180480
D0488108: RNCC: 3 | RNVC: 2

18 Nov 1994

5340-15-198-9705
Antivibrante

151989705
51005722: RNCC: 3 | RNVC: 2
(241)A542351005722: RNCC: 5 | RNVC: 2

14 Dec 2004

5340-15-112-0414
Dispositivo Di Supp

151120414
275A2754-401: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-127-4208
Anello

151274208
849128: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-122-9229
Inserto

151229229
80-011-P10C1-0: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-115-8692
Slide Front

151158692
273665P1: RNCC: 3 | RNVC: 2
71-02-023-003: RNCC: 3 | RNVC: 2

1 Feb 1993

5340-15-180-4298
Protection Assembly

151804298
212-1135-55-103: RNCC: 3 | RNVC: 2
(241)A0126212-1135-55-103: RNCC: 5 | RNVC: 2

20 May 2008

5340-15-000-4692
Piastra Angolare

150004692
CMA395: RNCC: 3 | RNVC: 2

7 Mar 2013

5340-15-193-2667
Shock Absorber

151932667
21506583: RNCC: 3 | RNVC: 2

23 Apr 2010

5340-15-154-2868
Control Rod

151542868
8203047: RNCC: 3 | RNVC: 2
1PA34888203047: RNCC: 5 | RNVC: 2

6 Apr 2001

5340-15-163-2891
Deckel

151632891
3855.112: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-179-3964
Slide

151793964
300018: RNCC: 3 | RNVC: 2

28 Nov 2006

5340-15-120-6860
Cilindro Esterno

151206860
D0483776: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-156-3896
Flange

151563896
(241)A3460CBD71348P01: RNCC: 3 | RNVC: 2
CBD71348P01: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-237-3381
Tassello In Plastic

152373381
11546100125: RNCC: 3 | RNVC: 2
534015E120585: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-149-2923
Farfalla Di Non Rit

151492923
4882218: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-213-8798
Maniglia Master In

152138798
MANIGLIA: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-061-1805
Electrical-Me Post

150611805
000200173500: RNCC: 5 | RNVC: 2
1200096-151100003: RNCC: 5 | RNVC: 2
000200173500: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-051-3665
Tassello

150513665
4054719: RNCC: 3 | RNVC: 2
4054719: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-142-7334
Turnbuckle

151427334
1127-15-899: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-178-7580
Manual Control Lever

151787580
037376: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-207-5976
Dust And Moisture Seal Protective Cap-Plug

152075976
178940166: RNCC: 3 | RNVC: 2
(241)A3936178940166: RNCC: 5 | RNVC: 2

5 Nov 2012

5340-15-113-2535
Compless Protezione

151132535
377A1540-401: RNCC: 3 | RNVC: 2

15 Apr 1991

5340-15-121-9041
Assieme Supporto

151219041
142514943: RNCC: 3 | RNVC: 2

19 Mar 1996

5340-15-150-5872
Elemento Cerniera

151505872
A37681-01-20: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-15-198-6647
Plug Assembly

151986647
(241)S49562401-0046-003: RNCC: 3 | RNVC: 2
2401-0046-003: RNCC: 3 | RNVC: 2

27 Oct 2004

5340-15-065-7496
Handle

150657496
V691-03: RNCC: 3 | RNVC: 2
V691-03: RNCC: 5 | RNVC: 9
V691-03: RNCC: 5 | RNVC: 9

27 Oct 1985

5340-15-127-7139
Handwheel

151277139
5420-62: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-155-4453
Rear Acc Cover Assy

151554453
CBD71289G01: RNCC: 3 | RNVC: 2

25 Mar 2002

5340-15-122-2530
Couvre Gaine Carbu

151222530
800012451: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-003-4785
Tassello Elastico

150034785
968260: RNCC: 3 | RNVC: 2
968260: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-110-6348
Plate

151106348
P-050575-005: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-166-4877
Cerniera

151664877
2619403: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-176-8016
Serratura Elettrica

151768016
5500025000: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-234-3607
Serratura Per Armad

152343607
H234: RNCC: 3 | RNVC: 2
534015E041784: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-158-5858
Rubber Bumper

151585858
122607500: RNCC: 3 | RNVC: 2

9 Mar 2004

5340-15-113-7865
Grooved Clamp Coupling

151137865
812241004: RNCC: 3 | RNVC: 2

27 Feb 1992

5340-15-112-6060
Rotation Limiter

151126060
75377: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-185-5851
Cilindro Sag. Mm59

151855851
NASELLOQUADRO: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-174-7640
Serrapacco Bl 40 L

151747640
68221-10/061: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-008-0598
Double Angle Bracket

150080598
60112520: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-212-0432
Morsetto Polo Posit

152120432
01-2107: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-005-1588
Control Rod

150051588
4163908: RNCC: 3 | RNVC: 2
4163908: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-040-5306
Turnbuckle

150405306
N84020T13812: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-065-8902
Control Radio Beaco

150658902
P-160500-401: RNCC: 3 | RNVC: 2
P160500-401: RNCC: 5 | RNVC: 2

31 Oct 1985

5340-15-170-3736
Clamp

151703736
206-070-190-5: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-101-4314
Hinge Half

151014314
P-135182-003: RNCC: 3 | RNVC: 2
P135182-003: RNCC: 5 | RNVC: 2

16 Jun 1988

5340-15-151-4712
Threaded End Tensioning Tie Rod

151514712
LAMX0032100: RNCC: 3 | RNVC: 2

29 May 2000

5340-15-139-3259
Tassello

151393259
1394284: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-218-2279
Scovolo Abrasivo Mm

152182279
1311SA-MM13: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-149-8854
Scontro

151498854
D0R0101654: RNCC: 3 | RNVC: 2

22 Jul 1999

5340-15-181-0569
Engine Accessory Bracket

151810569
071681: RNCC: 3 | RNVC: 2
(241)A3593071681: RNCC: 5 | RNVC: 2

10 Oct 2008

5340-15-001-5960
Webbing Strap

150015960
42566969: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-109-6201
Control Rod

151096201
59261161: RNCC: 3 | RNVC: 2

2 Dec 1989

5340-15-001-3473
Helical Compression Spring Seat

150013473
504129182: RNCC: 3 | RNVC: 2

17 Jun 2013

5340-15-114-7846
Lever

151147846
560.5200.194: RNCC: 3 | RNVC: 2

4 Aug 1992

5340-15-149-3044
Valvola Unidirez.Ri

151493044
4885455: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-179-2016
Seperator

151792016
985.954910: RNCC: 3 | RNVC: 2

15 Jun 2006

5340-15-149-3170
Leva Comando Accele

151493170
4886315: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-215-5511
Work Station Access

152155511
KAPB6: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-158-4298
Chiusura Ad Impront

151584298
88303: RNCC: 3 | RNVC: 2
(241)A323888303: RNCC: 5 | RNVC: 2

12 Feb 2004

5340-15-108-6207
Control Rod

151086207
93919315: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-231-5695
Staffa Sx 525

152315695
534015E093115: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-051-3645
Piastra Sicurezza

150513645
4541805: RNCC: 3 | RNVC: 2
4541805: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-103-8645
Control Rod

151038645
7167950: RNCC: 3 | RNVC: 2
(7001)5340151038645: RNCC: 5 | RNVC: 2

30 Mar 1988

5340-15-217-6893
Borsa Leggera Cm40

152176893
99346: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-059-7075
Leva Comando Comple

150597075
0337: RNCC: 3 | RNVC: 2

19 May 1976

5340-15-156-1543
Pipe Bracket

151561543
500337449: RNCC: 3 | RNVC: 2

6 Dec 2002

5340-15-151-7863
Double Angle Bracket

151517863
0-179740: RNCC: 3 | RNVC: 2

10 Jul 2000

5340-15-006-2544
Raschiatore Special

150062544
0-28875: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-149-2926
Flangia Accopp.Pomp

151492926
4882251: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-179-7058
Dust And Moisture Seal Protective Cap

151797058
0000500414494: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-001-7795
Nut And Bolt Retainer

150017795
8053135: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-156-3859
Plate

151563859
(241)A3460CBD71351P03: RNCC: 3 | RNVC: 2
CBD71351P03: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-154-2877
Maniglia Ad Incasso

151542877
1PA3488PL0000740: RNCC: 3 | RNVC: 2
PL0000740: RNCC: 5 | RNVC: 2

6 Apr 2001

5340-15-181-0718
Reinforcement Ring

151810718
N925G1579201: RNCC: 3 | RNVC: 2

15 Oct 2008

5340-15-221-6967
Padlock

152216967
5340RI0991161: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-156-3711
Interfacing Bracket

151563711
(241)A3460CBD71335P05: RNCC: 3 | RNVC: 2
CBD71335P05: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-199-4371
Asse

151994371
492663: RNCC: 3 | RNVC: 2
(241)A0866492663: RNCC: 5 | RNVC: 2

4 Apr 2005

5340-15-117-0590
Coin De Lame Gauche

151170590
70646379: RNCC: 3 | RNVC: 2
(241)AE19270646379: RNCC: 5 | RNVC: 2
70646379: RNCC: 5 | RNVC: 2

28 Jul 1993

5340-15-003-3476
Threaded End Tensioning Tie Rod

150033476
1P 612341: RNCC: 3 | RNVC: 2
(241)A01061P 612341: RNCC: 5 | RNVC: 2

4 Nov 2013

5340-15-120-4746
Threaded End Tensioning Tie Rod

151204746
1Z 601111: RNCC: 3 | RNVC: 2
1Z 601111: RNCC: 5 | RNVC: 9

5 Nov 1996

5340-15-193-9100
Sealing Plug Assembly

151939100
0222: RNCC: 3 | RNVC: 2
(241)AJ2220222: RNCC: 5 | RNVC: 2

27 Jul 2010

5340-15-006-3060
Plate Locking

150063060
P-180059-001: RNCC: 3 | RNVC: 2
P180059-001: RNCC: 5 | RNVC: 2

24 Nov 1979

5340-15-009-6363
Telaio Portante

150096363
159276G1: RNCC: 3 | RNVC: 2

17 Oct 1980

5340-15-206-9554
Dispositivo Chiusur

152069554
504040094: RNCC: 3 | RNVC: 2
504040094: RNCC: 3 | RNVC: 2
(241)AE385504040094: RNCC: 5 | RNVC: 2

1 Aug 2012

5340-15-186-9359
Rod Retainer Clip

151869359
11119003: RNCC: 3 | RNVC: 2

5 Jan 2009

5340-15-105-4929
Cinghia Puntalino

151054929
2/20538-20.03.68-03: RNCC: 3 | RNVC: 2

30 May 1989

Load More Results