What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 38 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 38 of 72

5340-15-127-2478
Molla

151272478
890072: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-114-7873
Guide

151147873
629.4845.180: RNCC: 3 | RNVC: 2

4 Aug 1992

5340-15-162-1883
Multiple Angle Bracket

151621883
109-0613-30-102: RNCC: 3 | RNVC: 2

3 Apr 2001

5340-15-007-2499
Rubber Bumper

150072499
1368774: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-138-4958
Fermaglio

151384958
5998258: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-196-8968
Nut And Bolt Retainer

151968968
PN UAS 00013967: RNCC: 3 | RNVC: 2
5306F76022621: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-151-4593
Tavellino

151514593
UOXM0640000: RNCC: 3 | RNVC: 2

29 May 2000

5340-15-237-7206
Flangia Con Anello

152377206
Z6038: RNCC: 3 | RNVC: 2
534015E154135: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-102-3508
Helical Compression Spring Seat

151023508
25093-106: RNCC: 3 | RNVC: 2
25093-106: RNCC: 5 | RNVC: 9

12 Oct 1987

5340-15-109-3984
Electrical-Me Post

151093984
5137-400-04: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-007-5001
Stripper Waxed Thre

150075001
1239-01-193: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-109-3689
Electrical-Me Post

151093689
5137-262-12: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-219-5282
Calotta Per Avvolgi

152195282
008P: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-122-5336
Spacer

151225336
01TL21828: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-101-7433
Pistra Forata

151017433
P4: RNCC: 3 | RNVC: 2

4 Feb 1994

5340-15-060-5028
Electrical-Me Post

150605028
776585W: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-148-1895
Access Door

151481895
555909010003: RNCC: 3 | RNVC: 2

1 Jul 1998

5340-15-100-8948
Semicerniera

151008948
109-0640-52-128: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-15-066-0280
Helical Compression Spring Seat

150660280
Y14-12: RNCC: 3 | RNVC: 2

10 Oct 1985

5340-15-053-5973
Anello

150535973
45-6279-11: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-114-3131
Bloccaggio Completo

151143131
CF328426: RNCC: 3 | RNVC: 2

4 Jun 1992

5340-15-177-5903
Fermaglio Spallacci

151775903
075054026: RNCC: 3 | RNVC: 2

13 May 2004

5340-15-213-8537
Serratura Patent Gr

152138537
B005974002: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-163-2792
Dust And Moisture Seal Protective Plug

151632792
8990.022: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-193-0216
Angle Bracket

151930216
504029965: RNCC: 3 | RNVC: 2
(241)A4249504029965: RNCC: 5 | RNVC: 2

6 Apr 2010

5340-15-074-4072
Turnbuckle

150744072
1B8UNI20180T60-2012A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-139-7980
Catenella Completa

151397980
1001709: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-050-3174
Double Angle Bracket

150503174
50040074: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-195-8607
Dust And Moisture Seal Protective Plug

151958607
A0000101585: RNCC: 3 | RNVC: 2
(241)AJ611A0000101585: RNCC: 5 | RNVC: 2

23 May 2011

5340-15-163-3022
Stopfen

151633022
9040.012: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-114-7330
Pastiglia

151147330
D0491247: RNCC: 3 | RNVC: 2

30 Jul 1992

5340-15-127-4461
Molla

151274461
1740-16-043: RNCC: 3 | RNVC: 2
1740-16-043: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-115-7053
Coperchio

151157053
D0468508: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-166-4894
Vaschetta Per Panne

151664894
545003: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-123-6680
Leva In Durall

151236680
2GMVDIS9-92: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-104-8878
Fissaggio Gaffetta

151048878
838105: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-193-2379
Piastra Di Montaggi

151932379
504167105: RNCC: 3 | RNVC: 2
(241)A4249504167105: RNCC: 5 | RNVC: 2

22 Apr 2010

5340-15-074-4051
Turnbuckle

150744051
2A10UNI20180T60AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-204-0259
Pattino Di Metallo

152040259
504314068: RNCC: 3 | RNVC: 2

19 Aug 2011

5340-15-120-6829
Testa Di Tir Occhio

151206829
D0486844: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-100-5172
Resilient Mount

151005172
45.40: RNCC: 3 | RNVC: 2

21 Mar 1987

5340-15-234-0269
Lucchetto Mm.40

152340269
1780/40: RNCC: 3 | RNVC: 2
534015E025982: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-188-9220
Piastrina

151889220
D1421525: RNCC: 3 | RNVC: 2
(241)A0461D1421525: RNCC: 5 | RNVC: 2

16 Dec 2009

5340-15-001-6622
Molla

150016622
174033013: RNCC: 3 | RNVC: 2
174033013: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-074-4092
Turnbuckle

150744092
2B80UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-230-9878
Kit Staffe Ancoragg

152309878
53092-60817-ECC: RNCC: 3 | RNVC: 2
534015E114745: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-149-1524
Assieme Gancio

151491524
2302-0055-001: RNCC: 3 | RNVC: 2

7 Dec 1998

5340-15-101-7819
Fascetta Speciale

151017819
SC32674.52: RNCC: 3 | RNVC: 2

21 Jul 1987

5340-15-120-6944
Flangia Accumulator

151206944
D0467638: RNCC: 3 | RNVC: 2

10 Jul 1996

5340-15-158-5804
Copertura In Gomma

151585804
122644315: RNCC: 3 | RNVC: 2

9 Mar 2004

5340-15-105-8488
Maniglia Ribaltabil

151058488
66-AD1: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-107-6726
Maniglia Speciale

151076726
(M8) 3747: RNCC: 3 | RNVC: 2

14 Apr 1987

5340-15-066-2756
Access Cover Plate

150662756
1127-05-504: RNCC: 3 | RNVC: 2
112705504: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-118-0396
Disco In Lega Antic

151180396
D0484586: RNCC: 3 | RNVC: 2

18 Nov 1994

5340-15-136-2679
Staffa

151362679
7301656: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-061-5582
Access Cover Plate

150615582
000200091050: RNCC: 5 | RNVC: 2
000200091050: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-166-5060
Retaining

151665060
31393001: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-217-7175
Barre Filettate

152177175
8X110: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-156-2000
Calibration Ball

151562000
(241)A3460CBD71270P01: RNCC: 3 | RNVC: 2
CBD71270P01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-115-6941
Control Rod

151156941
D1401487: RNCC: 3 | RNVC: 2

8 Mar 1994

5340-15-138-3085
Fermaglio

151383085
14191187: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-153-6563
Posterior Cerniera

151536563
142041135: RNCC: 1 | RNVC: 3

20 Feb 2001

5340-15-212-4159
Catena In Pvc

152124159
8X20X40: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-074-4081
Turnbuckle

150744081
2B27UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-074-4136
Turnbuckle

150744136
2C80UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-136-2009
Protezione Microfic

151362009
9066119: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-051-3767
Molla

150513767
9913421: RNCC: 3 | RNVC: 2
9913421: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-135-8465
Tappo Di Sughero

151358465
NO17SHORT: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-122-1945
Dust And Moisture Seal Protective Cap-Plug

151221945
99991171: RNCC: 3 | RNVC: 2
99991171: RNCC: 5 | RNVC: 9

14 Jun 1996

5340-15-153-9715
Sostegno Elastico

151539715
1Q 610452: RNCC: 3 | RNVC: 2

13 Mar 2001

5340-15-056-6044
Bandella Laterale

150566044
15984: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-121-4624
Tappo Assieme

151214624
200A0003-401: RNCC: 3 | RNVC: 2

21 Dec 1995

5340-15-074-4050
Turnbuckle

150744050
2A8UNI20180T60AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-220-2521
Carrucola Con Ganci

152202521
ART.1048: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-198-6161
Twistlock Right Loc

151986161
020887: RNCC: 3 | RNVC: 2
(241)A3593020887: RNCC: 5 | RNVC: 2

19 Oct 2004

5340-15-206-0276
Rondella Battuta

152060276
58294: RNCC: 3 | RNVC: 2
(241)A348858294: RNCC: 5 | RNVC: 2

4 May 2012

5340-15-102-3486
Helical Compression Spring Seat

151023486
25093-125: RNCC: 3 | RNVC: 2
25093-125: RNCC: 5 | RNVC: 9

12 Oct 1987

5340-15-121-7960
Shock Mount Pad

151217960
AVAU 705B117-53: RNCC: 3 | RNVC: 2
142520239: RNCC: 5 | RNVC: 2

21 Feb 1996

5340-15-005-3868
Dust And Moisture Seal Protective Plug

150053868
A83244-19: RNCC: 3 | RNVC: 2

12 Feb 1979

5340-15-074-4164
Turnbuckle

150744164
1A8UNI2019A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-187-8970
Hook

151878970
00427R0140: RNCC: 3 | RNVC: 2
42714: RNCC: 3 | RNVC: 2

20 May 2009

5340-15-200-7178
Helical Compression Spring Seat

152007178
99474123: RNCC: 3 | RNVC: 2
(241)A424999474123: RNCC: 5 | RNVC: 2

21 Feb 2006

5340-15-193-1917
Dust And Moisture Seal Protective Cap

151931917
3534506M2: RNCC: 3 | RNVC: 2

20 Apr 2010

5340-15-063-3191
Double Angle Bracket

150633191
60104852: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-002-5412
Dust And Moisture Seal Protective Cover

150025412
5801335550: RNCC: 3 | RNVC: 2

3 Sep 2013

5340-15-213-8781
Tappo Scarico Acqua

152138781
MA4409: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-155-8273
Support Bracket

151558273
4133T08G01: RNCC: 3 | RNVC: 2
4133T08G01: RNCC: 3 | RNVC: 2

11 Jul 2002

5340-15-007-2700
Arresto Por Tirante

150072700
1385131: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-009-1420
Resilient Mount

150091420
1383788: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-117-1967
Pad Eye

151171967
121103188: RNCC: 3 | RNVC: 2

2 Sep 1993

5340-15-216-1814
Sagome Per Cornice

152161814
SAGOME: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-181-4303
Fermaglio

151814303
XF193: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-200-7642
Protezione Per Tras

152007642
71583301: RNCC: 3 | RNVC: 2
(241)A510371583301: RNCC: 5 | RNVC: 2

23 Feb 2006

5340-15-157-2220
Pneumatic Tire Wheel Rim

151572220
500330663: RNCC: 3 | RNVC: 2
(241)A4249500330663: RNCC: 5 | RNVC: 2

27 May 2003

5340-15-199-5012
Engine Accessory Bracket

151995012
1Q 606993: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-15-105-8503
Double Angle Bracket

151058503
1366193: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-056-4387
Resilient Mount

150564387
88216721: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-166-4829
Guida Per Finestrin

151664829
20403085397: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-181-1745
Sostegno Elastico

151811745
179004122: RNCC: 3 | RNVC: 2
(241)A0199179004122: RNCC: 5 | RNVC: 2

5 Nov 2008

5340-15-136-2638
Staffetta

151362638
5941012: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-154-7797
Leva

151547797
D74230: RNCC: 3 | RNVC: 2

25 Sep 2001

5340-15-001-5704
Dust And Moisture Seal Protective Cover

150015704
PGCPHC000000: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-101-3684
Handwheel

151013684
6243-3V: RNCC: 3 | RNVC: 2

13 Jun 1994

5340-15-217-3749
Prolunga In Allumin

152173749
360.010: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-061-5164
Nut And Bolt Retainer

150615164
P26HC34: RNCC: 5 | RNVC: 2
P26HC34: RNCC: 5 | RNVC: 9

12 Oct 1977

5340-15-231-1348
Supporto

152311348
7556965: RNCC: 3 | RNVC: 2
534015E073554: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-138-5736
Tappo

151385736
79019311: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-135-9720
Cerniera

151359720
1387827: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-181-1750
Collare Doppio

151811750
179004376: RNCC: 3 | RNVC: 2
(241)A0199179004376: RNCC: 5 | RNVC: 2

5 Nov 2008

5340-15-186-9307
Dust And Moisture Seal Protective Cap-Plug

151869307
04031026: RNCC: 3 | RNVC: 2

5 Jan 2009

5340-15-144-2036
Fascetta

151442036
1413-31025: RNCC: 3 | RNVC: 2
1413-31-025: RNCC: 3 | RNVC: 2
1413-31-025: RNCC: 5 | RNVC: 9
1413-31025: RNCC: 5 | RNVC: 9

11 Dec 1996

5340-15-200-1915
Protezione

152001915
157611129: RNCC: 3 | RNVC: 2
(241)A0199157611129: RNCC: 5 | RNVC: 2

24 Oct 2005

5340-15-053-0678
Bracket Synchro

150530678
53B054P005: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-042-2856
Fascetta Speciale

150422856
7113-07: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-110-2889
Bracket Fue

151102889
P120084-002: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-109-1920
Mensolacompleta

151091920
1394037: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-219-0944
Escutcheon Plate

152190944
93820000: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-170-8099
Piastra Interfaccia

151708099
141-3485/01: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-192-6311
Coperchio

151926311
J92222215-001: RNCC: 3 | RNVC: 2

26 Mar 2010

5340-15-109-7249
Resilient Mount

151097249
60135028: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-127-6158
Molla Inf.Richiamo

151276158
4009092: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-102-4597
Fascetta Speciale

151024597
RECUP006: RNCC: 3 | RNVC: 2

15 Oct 1988

5340-15-074-4424
Turnbuckle

150744424
1B6UNI20210T60-2012A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-136-5374
Piastra Per Diffuso

151365374
V200618: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-134-1600
Snap Hook

151341600
1204: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-118-0347
Ritegno Sfera Valvo

151180347
467963: RNCC: 3 | RNVC: 2
D0467963: RNCC: 3 | RNVC: 2

14 Dec 1994

5340-15-106-0830
Chiusura Ad Agganci

151060830
503-03-4535: RNCC: 5 | RNVC: 2
503-03-4535: RNCC: 5 | RNVC: 9

30 May 1989

5340-15-007-5229
Cover Plate Access

150075229
1239-01-142: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-113-2377
Staffa

151132377
233A2008-001: RNCC: 3 | RNVC: 2

11 Apr 1991

5340-15-144-9714
Sealing Plug Assembly

151449714
D0329851: RNCC: 3 | RNVC: 2

26 Feb 1997

5340-15-231-1838
Tassello

152311838
1301094080: RNCC: 3 | RNVC: 2
534015E103416: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-205-2539
Dust And Moisture Seal Protective Cover

152052539
504379114: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-213-8899
Perno Di Collegamen

152138899
GS2253: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-112-0471
Dispositivo Di Supp

151120471
252A2304-401: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-135-9683
Tappo

151359683
100-050B500: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-170-3227
Pressur Intensifier

151703227
GM1-1509H+D40: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-120-1406
Air Housing

151201406
489312: RNCC: 3 | RNVC: 2
D0489312: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-15-142-8981
Disc

151428981
474102: RNCC: 3 | RNVC: 2

22 Oct 1996

5340-15-109-7268
Helical Compression Spring Seat

151097268
8950712204: RNCC: 3 | RNVC: 2
00034500: RNCC: 4 | RNVC: 1
(241)A396300034500: RNCC: 5 | RNVC: 2
9986771: RNCC: 5 | RNVC: 2

23 Oct 1988

5340-15-136-0808
Cerniera

151360808
4633745: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-198-5820
Bracket Mounting

151985820
A137971-1: RNCC: 3 | RNVC: 2
(241)A0076A137971-1: RNCC: 5 | RNVC: 2

15 Oct 2004

5340-15-107-9892
Nonmetallic Bumper

151079892
318-0318/01: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-156-3345
Removal Drift Assy

151563345
(241)A3460CBD71236G01: RNCC: 3 | RNVC: 2
CBD71236G01: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-15-066-7271
Handwheel

150667271
369909: RNCC: 2 | RNVC: 2

20 Jun 1996

5340-15-177-6763
Clamp

151776763
00085921: RNCC: 3 | RNVC: 2

4 Jun 2004

5340-15-118-0888
Dust And Moisture Seal Protective Plug

151180888
D0472458: RNCC: 3 | RNVC: 2

29 Nov 1994

5340-15-210-6390
Tassello Elastico

152106390
46432186: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-068-2305
Anchor Strap

150682305
W012204: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-114-5730
Electrical-Me Post

151145730
000205450000: RNCC: 5 | RNVC: 2
000205450000: RNCC: 5 | RNVC: 9

18 Jun 1992

5340-15-053-2045
Turnbuckle

150532045
1B6UNI2018X15CN1808-4047: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-162-2109
Electronic Equipment Hardware Kit

151622109
3AL34327AA**: RNCC: 3 | RNVC: 2

17 May 2001

5340-15-142-1018
Tirante

151421018
95979F0: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-197-5140
Antif.Acc.M24

151975140
PN UAS 00019049: RNCC: 3 | RNVC: 2
5340F76017763: RNCC: 5 | RNVC: 9

8 Apr 2004

5340-15-213-4473
Cilindro Con Pomolo

152134473
203152: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-108-5062
Handwheel

151085062
6204005: RNCC: 3 | RNVC: 2

8 May 1989

5340-15-115-7116
Flangia Tubo Misura

151157116
D0467828: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-181-4220
Insert

151814220
354534-1: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-068-6463
Cover Plate Access

150686463
W010654: RNCC: 3 | RNVC: 2
(7001)5340150686463: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-166-4794
Stud

151664794
3412757: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-206-3566
Angle Bracket

152063566
50040 6178: RNCC: 3 | RNVC: 2

4 Jun 2012

5340-15-127-4851
Staffetta Fiss. Tub

151274851
856276: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-156-2130
Lay-By Stand Assy

151562130
(241)A3460CBD71066G01: RNCC: 3 | RNVC: 2
CBD71066G01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-110-4872
Serratura Ad Incass

151104872
2325716: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-119-5420
Piastrina Sinistra

151195420
D0481798: RNCC: 3 | RNVC: 2

24 Mar 1995

5340-15-154-1832
Tappo Di Protezione

151541832
136400: RNCC: 3 | RNVC: 2

27 Mar 2001

5340-15-127-3825
Staffetta Di Sosteg

151273825
849957: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-103-2016
Piastrina

151032016
DE160.02.058: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-139-7701
Fissaggio Gaffetta

151397701
0047015: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-115-7124
Flangia Tubo Misura

151157124
D1401039: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-15-107-6756
Resilient Mount

151076756
LPS41040-1: RNCC: 3 | RNVC: 2
LPS41040-1: RNCC: 3 | RNVC: 2

16 Dec 1988

5340-15-202-0176
Supporto A Y

152020176
YAR 204 2 F SKF: RNCC: 3 | RNVC: 2
YAR 204 2F: RNCC: 5 | RNVC: 2
(241)A5465YAR2042FSKF: RNCC: 5 | RNVC: 2

24 Jan 2007

5340-15-203-4558
L Thread Protection

152034558
N714U3005201: RNCC: 3 | RNVC: 2
(241)A0126N714U3005201: RNCC: 5 | RNVC: 2

4 Feb 2008

5340-15-198-8998
Headless Straight Rod

151988998
26HJ04143043S01-423/001: RNCC: 3 | RNVC: 2

25 Nov 2004

5340-15-150-4939
Cerniera Speciale

151504939
129-0380-09-102: RNCC: 3 | RNVC: 2

22 Nov 1999

5340-15-218-4876
Guida Cinghia

152184876
GUIDACINGHIAXTAPPARELLA: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-138-3470
Tirante

151383470
4088079: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-074-4348
Turnbuckle

150744348
1C8UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-001-1425
Manual Control Lever

150011425
76043534: RNCC: 3 | RNVC: 2

31 May 2013

5340-15-005-1494
Clamp Loop

150051494
211-501-9123: RNCC: 3 | RNVC: 2

9 Dec 2013

5340-15-170-9317
Resilient Mount

151709317
504079676: RNCC: 3 | RNVC: 2

17 Jun 2003

5340-15-220-5001
Spingiporta

152205001
SPINGIPORTA-YALE: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-060-4646
Electrical-Me Post

150604646
1127-20-228: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-054-4231
Staffa Fissaggio

150544231
709097ET2I111: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-166-4785
Fissaggi Universali

151664785
SB91: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-204-3457
Corrosion Preventive Anode

152043457
25010013: RNCC: 3 | RNVC: 2
(241)ACA6425010013: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-150-6028
Double Angle Bracket

151506028
150486: RNCC: 3 | RNVC: 2

6 Dec 1999

5340-15-102-0329
Dust And Moisture Seal Protective Cap

151020329
0473R06: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-138-3675
Fermo

151383675
4327179: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-115-7415
Nut And Bolt Retainer

151157415
210297/10: RNCC: 3 | RNVC: 2

2 Sep 1993

5340-15-108-7790
Corrosion Preventive Anode

151087790
3603-1004-1POS.23: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-105-1755
Padlock

151051755
8093425: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-155-0193
Handwheel

151550193
1PA91727315601635000: RNCC: 3 | RNVC: 2
7315601635000: RNCC: 3 | RNVC: 2

8 Jan 2002

5340-15-164-4932
Escutcheon Plate

151644932
77204106: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-158-6127
Eye Hook

151586127
122607606: RNCC: 3 | RNVC: 2

10 Mar 2004

5340-15-118-0500
Portello Laterale

151180500
D0491578: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-106-0072
Piastra Bloccaggio

151060072
2054955: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-127-5498
Molla

151275498
883840: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-178-4043
Loop Clamp Kit

151784043
157608045: RNCC: 3 | RNVC: 2

31 May 2005

5340-15-107-2567
Electrical-Me Post

151072567
5054-27: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-166-4993
Hinge Half

151664993
213A7160001: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-179-3882
Tank

151793882
900068: RNCC: 3 | RNVC: 2

28 Nov 2006

5340-15-114-3173
Manicotto Con Leva

151143173
CF419709: RNCC: 3 | RNVC: 2

4 Jun 1992

5340-15-009-1999
Plastic Bumper

150091999
4604631: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-060-7124
Manual Control Lever

150607124
163DCBA4: RNCC: 5 | RNVC: 2
163DCBA4: RNCC: 5 | RNVC: 9

12 Sep 1977

5340-15-187-1730
Manual Control Lever

151871730
6018: RNCC: 3 | RNVC: 2

23 Feb 2009

5340-15-157-7256
Turnbuckle

151577256
TENDIT.FORC.CORTO 16MMUNI6900.71: RNCC: 3 | RNVC: 2

16 Oct 2003

5340-15-102-9961
Control Rod

151029961
79005958: RNCC: 3 | RNVC: 2
F300 0T 001 1747: RNCC: 6 | RNVC: 9

21 Jun 1987

5340-15-179-0647
Manual Control Handle

151790647
ART,501LV: RNCC: 3 | RNVC: 2

20 Apr 2006

5340-15-221-8981
Confezioni Filetti

152218981
CONFEZIONEFILETTI: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-127-1194
Tirante Per Pedale

151271194
600853: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-155-4939
Rubber Support Left

151554939
CBD71130P09: RNCC: 3 | RNVC: 2

28 Mar 2002

5340-15-105-6326
Collare Serraggio

151056326
8826724: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-197-6790
Protezione

151976790
530500: RNCC: 3 | RNVC: 2

20 Apr 2004

5340-15-100-0763
Loop Clamp

5340-15-068-5791
Expansion Plug

5340-15-115-6095
Compless Saltarello

151156095
D0371793: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-065-8270
Canalina

150658270
L600-60/32: RNCC: 3 | RNVC: 2

4 Sep 1985

5340-15-231-3373
Staffa

152313373
4919657: RNCC: 3 | RNVC: 2
534015E155979: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-107-3932
Acc Pino Coperchio

151073932
4547528: RNCC: 3 | RNVC: 2

11 Apr 1986

5340-15-185-7425
Spazzola Con Manico

151857425
143: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-141-4414
Lastra

151414414
W015550: RNCC: 3 | RNVC: 2
(7001)5340151414414: RNCC: 5 | RNVC: 2

9 Jun 1997

5340-15-041-8054
Bieletta

150418054
5-1471-1-01-44325: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-206-1533
Molla

152061533
5340159802042: RNCC: 3 | RNVC: 2
(241)A88205340159802042: RNCC: 5 | RNVC: 2

25 May 2012

5340-15-166-5207
Cilindro Iseo Mm.70

151665207
82003040: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-180-2871
Turnbuckle

151802871
(241)A53606722-M16: RNCC: 3 | RNVC: 2
6722-M16: RNCC: 3 | RNVC: 2

14 Apr 2008

5340-15-204-3007
Dust And Moisture Seal Protective Cap

152043007
N635G1107101: RNCC: 3 | RNVC: 2
(241)A0126N635G1107101: RNCC: 5 | RNVC: 2

19 Oct 2011

5340-15-156-4040
Soffietto Protezion

151564040
142057336: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-178-2934
Threaded End Tensioning Tie Rod

151782934
1Z 590199LG: RNCC: 3 | RNVC: 2
1Z 590199LG: RNCC: 5 | RNVC: 9

29 Apr 2005

5340-15-166-5084
Cap

151665084
RAA15: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-104-8860
Fissaggio Gaffetta

151048860
4555169: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-186-3182
Cerniere Per Sporte

151863182
C180: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-205-7707
Staffa

152057707
SUPRA850: RNCC: 3 | RNVC: 2
(241)AD050SUPRA850: RNCC: 5 | RNVC: 2

2 Apr 2012

5340-15-216-4590
Tassello

152164590
5608V: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-061-3784
Supporto Metallico

150613784
P26CA3: RNCC: 5 | RNVC: 2
P26CA3: RNCC: 5 | RNVC: 9

22 Sep 1977

5340-15-154-1474
Innesto Rapido

151541474
ART720: RNCC: 3 | RNVC: 2

23 Mar 2001

5340-15-149-6267
Clamp

151496267
890AN0050: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-112-8414
Supportopera

151128414
466612: RNCC: 3 | RNVC: 2
D0466612: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-136-9076
Inserto

151369076
STD1832: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-074-4407
Turnbuckle

150744407
2A16UNI2021AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-059-8100
Rotolo Nastro Fasce

150598100
616010090: RNCC: 3 | RNVC: 2

26 Jun 1976

5340-15-207-3319
Utility Resilient Mount

152073319
500329485: RNCC: 3 | RNVC: 2
0026025: RNCC: 5 | RNVC: 2

9 Oct 2012

5340-15-218-3528
Platorello Atadisc

152183528
ST50: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-234-4038
Collare Fissaggio F

152344038
5634.01FT-3/8": RNCC: 3 | RNVC: 2
534015E066779: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-151-2865
Access Door

151512865
541-37-0170: RNCC: 2 | RNVC: 3
541370170: RNCC: 3 | RNVC: 2
554137017000: RNCC: 5 | RNVC: 2

8 Jun 2000

5340-15-107-9865
Flange

151079865
140-1010/01: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-166-4963
Staffa Supporto Com

151664963
4023811: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-066-4931
Rullino Per Catena

150664931
B0040/R14: RNCC: 3 | RNVC: 2

1 Mar 1986

5340-15-148-8837
Corrosion Preventive Anode

151488837
D0583805: RNCC: 3 | RNVC: 2
583805: RNCC: 3 | RNVC: 2

3 Feb 1999

5340-15-178-0677
Mechanic Equipment Hardware Kit

151780677
053214: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-15-205-2510
Universal Adjustable Chock

152052510
504377577: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-104-8886
Fissaggio Gaffetta

151048886
22218: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-138-6693
Paracolpi

151386693
3174: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-210-8340
Serratura

152108340
7719774: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-059-2282
Key Blank

150592282
NP17UDS: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-112-8532
Supporto

151128532
471842: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-211-8668
Monorotaia T083 30M

152118668
M0N0R0TAIAT08330MM: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-149-0748
Speciale Fascetta

151490748
PNE207001-002: RNCC: 3 | RNVC: 2

23 Nov 1998

5340-15-009-3556
Rubber Bumper

150093556
1376-07-275: RNCC: 3 | RNVC: 2
137607275: RNCC: 5 | RNVC: 2

22 Jul 1999

5340-15-061-2102
Rim Clen Clamp (1)

150612102
T0064108: RNCC: 5 | RNVC: 2
1200096-113340080: RNCC: 5 | RNVC: 2
L304BB: RNCC: 5 | RNVC: 2
L304BB: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-204-2342
Pomello Vite

152042342
PRIGI0028: RNCC: 3 | RNVC: 2
(241)A4114PRIGI0028: RNCC: 5 | RNVC: 2

6 Oct 2011

5340-15-004-9858
Leading Edge Strip

150049858
17167: RNCC: 3 | RNVC: 2

9 Dec 2013

5340-15-149-4561
Gancio

151494561
1083.026: RNCC: 3 | RNVC: 2

10 Mar 1999

5340-15-103-0987
Electrical-Me Post

151030987
013.00.634: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-201-4928
Half Hinge

152014928
N523G5166203: RNCC: 3 | RNVC: 2
(241)A0126N523G5166203: RNCC: 5 | RNVC: 2

3 Oct 2006

5340-15-063-6207
Cover Plate Access

150636207
4727154: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-123-7946
Lucchetto Tipo Viro

151237946
LUCCHETTO 75: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-121-6310
Plaque Butee

151216310
800035874: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-127-4040
Anello Elastico Cam

151274040
840950: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-231-8439
Silentblock

152318439
8587681: RNCC: 3 | RNVC: 2
534015E073112: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-160-1112
Lucchetto C.

151601112
F720129821: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-137-5544
Reggetta Metallica

151375544
KG19: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-122-9249
Cerniera

151229249
205-032-423-69: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-180-4641
Cavo Bowden

151804641
20255092: RNCC: 3 | RNVC: 2
(241)A424942556717: RNCC: 5 | RNVC: 2
42556717: RNCC: 5 | RNVC: 2

27 May 2008

5340-15-179-0705
Key Blank

151790705
WT7P: RNCC: 3 | RNVC: 2

20 Apr 2006

5340-15-067-3369
Gommino Interno

150673369
895C: RNCC: 2 | RNVC: 2

1 Apr 1998

5340-15-074-4279
Turnbuckle

150744279
1A8UNI20200T60-2012A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-063-6367
Cover Plate Access

150636367
820.08: RNCC: 3 | RNVC: 2
9926179: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-189-5371
Fascetta

151895371
211-517-9005: RNCC: 3 | RNVC: 2

26 Feb 2010

5340-15-154-1790
Coperchio

151541790
130763: RNCC: 3 | RNVC: 2

27 Mar 2001

5340-15-116-3020
Coperchiospeciale

151163020
190518133: RNCC: 3 | RNVC: 2

19 Apr 1993

5340-15-235-4363
Cilindro Ovale Per

152354363
70222220: RNCC: 3 | RNVC: 2

27 Aug 2007

5340-15-166-5076
Clamp

151665076
31801001: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-181-1765
Scontro

151811765
179040142: RNCC: 3 | RNVC: 2
(241)A0199179040142: RNCC: 5 | RNVC: 2

5 Nov 2008

5340-15-153-8177
Handwheel

151538177
T0064529: RNCC: 5 | RNVC: 2
15931A103320: RNCC: 5 | RNVC: 3
15931A103320: RNCC: 5 | RNVC: 9

1 Mar 2001

5340-15-114-7567
Retain Ring

151147567
12UNI7435-75: RNCC: 3 | RNVC: 2

4 Aug 1992

5340-15-103-4402
Clamp

151034402
8897700: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-114-7779
Clamp

151147779
625.3617.075: RNCC: 3 | RNVC: 2

4 Aug 1992

5340-15-108-0656
Boss Guide

151080656
01TL23171: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-166-4740
Tornichetto

151664740
NS4E01137: RNCC: 3 | RNVC: 2
NS4E01137: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-201-4639
Half-Hinge

152014639
N967G7080202: RNCC: 3 | RNVC: 2
(241)A0126N967G7080202: RNCC: 5 | RNVC: 2

24 Sep 2006

5340-15-104-8915
Fissaggio Gaffetta

151048915
593186: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-166-4765
Standard Hardware

151664765
KTANARN118: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-156-4247
Sostegno Elastico

151564247
3M424N2680: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-068-2309
Anchor Strap

150682309
W011529: RNCC: 3 | RNVC: 2
(7001)5340150682309: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-068-1954
Gruppo Staffaggio

150681954
644637: RNCC: 3 | RNVC: 2
644637: RNCC: 5 | RNVC: 9

27 Feb 1986

5340-15-120-8379
Fl Mounting

151208379
781050: RNCC: 3 | RNVC: 2

4 Sep 1995

5340-15-150-3706
Handwheel

151503706
737-100-021: RNCC: 3 | RNVC: 2
(7001)5340151503706: RNCC: 5 | RNVC: 2

5 Oct 1999

5340-15-142-5643
Cerniera

151425643
9724-00: RNCC: 3 | RNVC: 2
9724-00: RNCC: 5 | RNVC: 9

9 Jun 1997

5340-15-204-8431
Stand Base

152048431
109-0315-56-123: RNCC: 3 | RNVC: 2

17 Jan 2012

5340-15-190-8740
Mancetta

151908740
61467: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-003-3470
Manual Control Lever

150033470
182724338: RNCC: 3 | RNVC: 2
(241)A0199182724338: RNCC: 5 | RNVC: 2

4 Nov 2013

5340-15-177-3671
Headless Straight Rod

151773671
014706BB: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-178-7646
Threaded End Tensioning Tie Rod

151787646
040123: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-120-4064
Dust And Moisture Seal Protective Cap-Plug

151204064
6.91.00.64.0: RNCC: 3 | RNVC: 2

20 Feb 1996

5340-15-213-3903
Portachiave Estensi

152133903
AVK300109: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-074-4175
Turnbuckle

150744175
2A6UNI2019AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-007-7362
Resilient Mount

150077362
4687476: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-116-7483
Bracket Mounting

151167483
538-02-2760: RNCC: 3 | RNVC: 2

24 Jun 1993

5340-15-051-4069
Staffa

150514069
4555658: RNCC: 3 | RNVC: 2
4555658: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-068-1959
Gruppo Staffaggio

150681959
644645: RNCC: 3 | RNVC: 2
644645: RNCC: 5 | RNVC: 9

27 Feb 1986

5340-15-139-3196
Tirante

151393196
1370045: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-231-8440
Silentblock

152318440
8591900: RNCC: 3 | RNVC: 2
534015E073113: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-068-1852
Pistone

150681852
476588: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-15-213-0299
Lucchetto Antiscass

152130299
ALA-90: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-119-7676
Synchro Clamp

151197676
TN4-0023-031-24: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-112-8135
Sedereg

151128135
468415: RNCC: 3 | RNVC: 2

4 Feb 1993

5340-15-198-0776
Resilient Mount

151980776
MGDNP10: RNCC: 3 | RNVC: 2
(241)A4997MGDNP10: RNCC: 5 | RNVC: 2

10 Jun 2004

5340-15-068-1956
Gruppo Staffaggio

150681956
644640: RNCC: 3 | RNVC: 2
644640: RNCC: 5 | RNVC: 9

27 Feb 1986

5340-15-169-8046
Lucchetti Combinaz.

151698046
F72018848: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-200-8374
Control Rod

152008374
157602184: RNCC: 3 | RNVC: 2
(241)A0199157602184: RNCC: 5 | RNVC: 2

13 Mar 2006

5340-15-110-5163
Lever Anchor

151105163
539116: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-074-4322
Turnbuckle

150744322
1B6UNI20200T60-2012A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-108-2843
Control Rod

151082843
D0478152: RNCC: 3 | RNVC: 2
478152: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-001-5481
Stand Base

150015481
182719572: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-15-103-2260
76 Millimetre Round

151032260
UT2.02645: RNCC: 3 | RNVC: 2
UT2.02645: RNCC: 3 | RNVC: 2

19 Jul 1988

5340-15-112-0510
Dispositivo Di Supp

151120510
244A1541-401: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-213-8689
Binario In Allumini

152138689
BINARIOMT2: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-156-6570
Threaded End Tensioning Tie Rod

151566570
4239515: RNCC: 3 | RNVC: 2

3 Mar 2003

5340-15-116-4863
Double Angle Bracket

151164863
60151124: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-151-4076
Headless Straight Rod

151514076
0-118798: RNCC: 3 | RNVC: 2

22 May 2000

5340-15-149-3183
Riparo In Lamiera C

151493183
4886388: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-189-0929
Saldata Staffetta

151890929
195531822: RNCC: 3 | RNVC: 2
(241)A0199195531822: RNCC: 5 | RNVC: 2

27 Jan 2010

5340-15-106-3255
Staffa

151063255
4551072: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-179-1783
Support Assembly

151791783
RS 418 232 AE: RNCC: 3 | RNVC: 2

13 Jun 2006

5340-15-120-6919
Coperchietto Testa

151206919
D0469716: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-120-6908
Coperchio Porta Lev

151206908
D0470783: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-063-3226
Resilient Mount

150633226
60108025: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-116-3956
Piastraritegno

151163956
220002018: RNCC: 3 | RNVC: 2

4 Oct 1993

5340-15-119-5917
Piastra Basamento

151195917
4881289: RNCC: 3 | RNVC: 2

19 Sep 1994

5340-15-109-6296
Supporto Fanaleria

151096296
002923: RNCC: 3 | RNVC: 2

2 Dec 1989

5340-15-103-1956
Access Door

151031956
DE013.13.384: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-157-8972
Assieme Tirante

151578972
0-113998: RNCC: 3 | RNVC: 2
(241)A39630-113998: RNCC: 5 | RNVC: 2
1PA39630-113998: RNCC: 5 | RNVC: 2

20 Nov 2003

5340-15-105-6343
Collare Serraggio

151056343
10112905: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-137-1202
Distanziatore

151371202
151099: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-188-6715
Pistoncino Piattell

151886715
157667281: RNCC: 3 | RNVC: 2
(241)A0199157667281: RNCC: 5 | RNVC: 2

21 Oct 2009

5340-15-166-5002
Plate

151665002
216A0007005: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-156-3667
Lock Block

151563667
(241)A3460CBD71405P10: RNCC: 3 | RNVC: 2
CBD71405P10: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-123-5687
Spinotto Estraibile

151235687
99A759P002: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-008-0707
Pad Eye

150080707
60103169: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-181-6092
Gomma Protettiva Pe

151816092
001G0403: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-059-4580
Scodellino Molla

150594580
10-03-71-00: RNCC: 3 | RNVC: 2

10 Apr 1975

5340-15-118-0323
Cuneo Di Bloccaggio

151180323
467464: RNCC: 3 | RNVC: 2
D0467464: RNCC: 3 | RNVC: 2

7 Dec 1994

5340-15-203-8594
Cap

152038594
58100344: RNCC: 3 | RNVC: 2

7 Jul 2011

5340-15-166-5066
Cap And Chain

151665066
44856001: RNCC: 3 | RNVC: 2
44856001: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-055-6876
Spessore Inferiore

150556876
529541: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-181-1749
Sostegno Elastico

151811749
179004326: RNCC: 3 | RNVC: 2
(241)A0199179004326: RNCC: 5 | RNVC: 2

5 Nov 2008

5340-15-199-4988
Seat Pipe Support

151994988
75666F91: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-15-236-9690
Serratura Per Legno

152369690
7414: RNCC: 3 | RNVC: 2
534015E080333: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-166-4782
Scodellino Molla Pe

151664782
9927801: RNCC: 3 | RNVC: 2
9927801: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-179-9404
Frame

151799404
504192384: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-195-5379
Molle Ormeggio

151955379
0118909: RNCC: 3 | RNVC: 2
01.189.09: RNCC: 3 | RNVC: 2
(241)A492801.189.09: RNCC: 5 | RNVC: 2

4 Apr 2011

5340-15-110-1586
Tacchettofilettato

151101586
1455-10-130: RNCC: 3 | RNVC: 2

30 Jan 1990

5340-15-182-4375
Asta Per Serratura

151824375
06415-00: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-003-1097
Roller Holder

150031097
182724027: RNCC: 3 | RNVC: 2
(241)A0199182724027: RNCC: 5 | RNVC: 2

25 Oct 2013

5340-15-166-4976
Cap

151664976
175682: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-118-6184
Crochet

151186184
9003863: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-187-8835
Conveyor

151878835
00588R0790: RNCC: 3 | RNVC: 2
58879: RNCC: 3 | RNVC: 2

19 May 2009

5340-15-062-3220
Control Rod

150623220
301011: RNCC: 3 | RNVC: 2

3 May 1980

5340-15-166-5264
Bobina Filo Armonic

151665264
998006: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-166-5219
Gear

151665219
1303332: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-153-7295
Handwheel

151537295
142050291: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-137-0828
Molla

151370828
65449: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-166-5141
Fascetta Serracavo

151665141
2105595: RNCC: 3 | RNVC: 2
(241)AA1362105595: RNCC: 5 | RNVC: 2

1 Nov 2002

5340-15-236-5125
Ruota In Gomma Gier

152365125
3982003: RNCC: 3 | RNVC: 2
534015E015386: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-103-2047
Elemento Chiusura

151032047
DE160.02.013: RNCC: 3 | RNVC: 2
(241)A5015DE160.02.013: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-138-5168
Piastrina

151385168
75444213: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-119-2860
Maniglia Trasporto

151192860
D1210603: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-15-055-6563
Squadretta Anterior

150556563
545718: RNCC: 3 | RNVC: 2

10 Apr 1972

5340-15-006-6890
Eye

150066890
525A170: RNCC: 3 | RNVC: 2

9 Jan 1980

5340-15-117-4908
Cerniera

151174908
68242-001A01: RNCC: 3 | RNVC: 2
68242-001A1: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-15-230-1747
Clip Assembly

152301747
678121: RNCC: 3 | RNVC: 2
534015E148956: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-042-2854
Fascetta Speciale

150422854
7113-032: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-151-5037
Tenditore

151515037
2106-01-18.10: RNCC: 3 | RNVC: 2

1 Jun 2000

5340-15-172-0577
Lucchetto Logo Art.

151720577
LUCCHETTO LOGO ART.2010-50: RNCC: 1 | RNVC: 2

1 Jun 2003

5340-15-113-2536
Compless Protezione

151132536
377A1544-001: RNCC: 3 | RNVC: 2

15 Apr 1991

5340-15-115-6936
Control Rod

151156936
D0470322: RNCC: 3 | RNVC: 2

8 Mar 1994

5340-15-156-2058
Flange

151562058
(241)A3460CBD71211P01: RNCC: 3 | RNVC: 2
CBD71211P01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-155-3324
Turnbuckle

151553324
99430139: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-15-201-6629
Rubber Bumper

152016629
N523G5239202: RNCC: 3 | RNVC: 2
(241)A0126N523G5239202: RNCC: 5 | RNVC: 2

9 Nov 2006

5340-15-139-3258
Tassello

151393258
1394283: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-070-9320
Rim Clen Clamp (1)

150709320
F333A20: RNCC: 3 | RNVC: 2
F333A-20: RNCC: 5 | RNVC: 2
F333A-20: RNCC: 5 | RNVC: 2

1 Mar 1978

5340-15-200-1570
Shock Mount Pad

152001570
970397: RNCC: 3 | RNVC: 2
(241)A3593970397: RNCC: 5 | RNVC: 2

11 Oct 2005

5340-15-152-9202
Seat Pipe Support

151529202
311873F91: RNCC: 3 | RNVC: 2

7 Nov 2000

5340-15-158-5242
Control Rod

151585242
263A1878-427: RNCC: 3 | RNVC: 2

1 Mar 2004

5340-15-006-9315
Threaded End Tensioning Tie Rod

150069315
506-25-08A: RNCC: 3 | RNVC: 2

2 Jan 1979

5340-15-074-4403
Turnbuckle

150744403
2A6UNI2021ZNAQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-231-7554
Serratura Cilindro

152317554
YALE 78: RNCC: 3 | RNVC: 2
CARBO 900: RNCC: 3 | RNVC: 2
534015E078586: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-213-8455
Borchia Copricilind

152138455
COPCIL: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-115-7006
Occhiello

151157006
D1401047: RNCC: 3 | RNVC: 2

10 Mar 1994

5340-15-103-1952
Piastrina

151031952
DE013.13.359: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-102-8811
Accesso Coperchio

151028811
1Q305857: RNCC: 3 | RNVC: 2
1Q305857: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-166-5092
Anima

151665092
53383: RNCC: 1 | RNVC: 2
53383: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-162-5798
Maunt

151625798
4856094: RNCC: 3 | RNVC: 2

30 Oct 2001

5340-15-061-5598
Dust And Moisture Seal Protective Plug

150615598
000200044300: RNCC: 5 | RNVC: 2
1200096-161000009: RNCC: 5 | RNVC: 2
000200044300: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-108-9092
Supportorigido

151089092
03958-108A1: RNCC: 3 | RNVC: 2

6 Sep 1989

5340-15-074-4149
Turnbuckle

150744149
1D6UNI20180T60-2012A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-105-2083
Rubber Bumper

151052083
814595: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-163-1654
Support

151631654
9613356780: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-194-4708
Compassi Per Gavoni

151944708
38.191.41: RNCC: 3 | RNVC: 2
(241)A492838.191.41: RNCC: 5 | RNVC: 2

18 Nov 2010

5340-15-187-6439
Box(Rh)

151876439
109-0362-25-204: RNCC: 3 | RNVC: 2
(241)A0126109-0362-25-204: RNCC: 5 | RNVC: 2

15 Apr 2009

5340-15-127-1021
Staffa Per Sostegno

151271021
398142: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-074-4135
Turnbuckle

150744135
2C76UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-055-6116
Staffetta

150556116
631434: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-155-9435
Metallic Solid Wheel

151559435
(241)A580949109564: RNCC: 3 | RNVC: 2
4 91095 64: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-15-236-2667
Testina Per Ingrass

152362667
3899/3: RNCC: 3 | RNVC: 2
534015E156298: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-218-2272
Fustella A Cavallot

152182272
ALFA524MM10: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-121-3109
Insert

151213109
7382-6: RNCC: 3 | RNVC: 2
7382-6: RNCC: 5 | RNVC: 9

23 Aug 2001

5340-15-175-6576
Serratura Elettrica

151756576
11921-60-1: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-110-5862
Helical Compression Spring Seat

151105862
60147149: RNCC: 3 | RNVC: 2

18 Apr 1990

5340-15-197-6943
Dust And Moisture Seal Protective Cap-Plug

151976943
640050: RNCC: 3 | RNVC: 2

20 Apr 2004

5340-15-195-0162
Lpt Blades Ass Base

151950162
CBD71190P02: RNCC: 3 | RNVC: 2
(241)A3460CBD71190P02: RNCC: 5 | RNVC: 2

16 Feb 2011

5340-15-055-6753
Piastra

150556753
532392: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-121-5778
Engine Accessory Bracket

151215778
1T 554152: RNCC: 3 | RNVC: 2
1T 554152: RNCC: 5 | RNVC: 9

18 Sep 1996

5340-15-008-0758
Double Angle Bracket

150080758
60113911: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-074-4393
Turnbuckle

150744393
1A10UNI2021ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-194-3717
Lock Bar

151943717
79059420: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-15-058-6746
Key Blank

150586746
NP17DS: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-139-5328
Tassello Gomma

151395328
8563414: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-180-9485
Door Assy

151809485
J94346713-404: RNCC: 3 | RNVC: 2
(241)A0019J94346713-404: RNCC: 5 | RNVC: 2

2 Sep 2008

5340-15-137-3751
Distance

151373751
V24598: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-118-4115
Cuffia Riparo Specc

151184115
60163693: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-142-2987
Protezione Comando

151422987
G65/3: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-102-3418
Poignee A Bille

151023418
251B: RNCC: 3 | RNVC: 2

19 Jul 1988

5340-15-141-1203
Tassello In Nylon C

151411203
302/8: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-143-1008
Forcella Testa Di T

151431008
99991169: RNCC: 3 | RNVC: 2

22 Nov 1996

5340-15-110-2807
Bracket 85

151102807
P125320-001: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-163-2797
Dust And Moisture Seal Protective Cap Set

151632797
9000.133: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-136-2606
Staffa

151362606
9621193: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-166-4820
Mensola Fischer Ner

151664820
1604: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-188-6834
Staffa Con Prigioni

151886834
157669022: RNCC: 3 | RNVC: 2
(241)A0199157669022: RNCC: 5 | RNVC: 2

21 Oct 2009

5340-15-162-0168
Cover

151620168
D3892.1000: RNCC: 5 | RNVC: 2
D3892.1000: RNCC: 5 | RNVC: 9

15 Nov 2000

5340-15-161-2160
Stop

151612160
A-A120718-1/1-5: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-15-170-8109
Levetta Di Estrazio

151708109
312-0646/01: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-177-5159
Clamp Plate

151775159
340-5700/01: RNCC: 3 | RNVC: 2

17 Apr 2004

5340-15-203-0378
Flangia Motorino A

152030378
033090084: RNCC: 3 | RNVC: 2
(241)A5009033090084: RNCC: 5 | RNVC: 2

19 Nov 2007

5340-15-105-8947
Tirante A Teste Fil

151058947
921.91: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-196-9930
Padlock

151969930
PN UAS 00021383: RNCC: 3 | RNVC: 2
5340F76013148: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-106-4414
Proiettore Molletta

151064414
9908347: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-129-8752
Molla

151298752
727062: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-127-4405
Molla Per Nottolino

151274405
1740-17-011: RNCC: 3 | RNVC: 2
1740-17-011: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-157-9871
Hinge Half

151579871
J94344033-001: RNCC: 3 | RNVC: 2

14 Dec 2003

5340-15-004-5813
Turnbuckle Body

150045813
96595-101: RNCC: 3 | RNVC: 2

13 Jul 1978

5340-15-009-8555
Perno Per Cerniera

150098555
3X691T58595-37: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-179-6549
Cover

151796549
873-5800-365: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-166-4754
Molla

151664754
B221976: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-183-4951
Lucchetti Vari

151834951
COMM631020060007: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-155-1346
Speciale Gancio

151551346
142064151: RNCC: 2 | RNVC: 3

18 Jan 2002

5340-15-200-1908
Control Rod

152001908
157602183: RNCC: 3 | RNVC: 2
(241)A0199157602183: RNCC: 5 | RNVC: 2

24 Oct 2005

5340-15-162-1451
Slide Support Block

151621451
127996: RNCC: 3 | RNVC: 2

2 Mar 2001

5340-15-174-6573
Terminal Board Fron

151746573
9903905410: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-15-103-1908
Telaio Piastra

151031908
DE013.12.895: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-161-1137
Padlock

151611137
F720187171: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-064-6990
Bracket

150646990
P-125734-002: RNCC: 3 | RNVC: 2
P125734-002: RNCC: 5 | RNVC: 2

10 Jun 1984

5340-15-007-3793
Fascetta Speciale

150073793
0-45763: RNCC: 3 | RNVC: 2
00045763: RNCC: 3 | RNVC: 2
1PA39630-45763: RNCC: 5 | RNVC: 2
(241)A39630-45763: RNCC: 5 | RNVC: 2

10 Apr 1979

5340-15-122-5536
Shaft Fork

151225536
01TL21207: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-152-7126
Flangia

151527126
D1403133: RNCC: 3 | RNVC: 2

18 Oct 2000

5340-15-118-0406
Stelo Cilindro Valv

151180406
484601: RNCC: 3 | RNVC: 2
D0484601: RNCC: 3 | RNVC: 2

14 Dec 1994

5340-15-005-5162
Resilient Mount

150055162
1391348: RNCC: 3 | RNVC: 2
1391348: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-054-9150
Supporto Piano

150549150
P36HD17: RNCC: 5 | RNVC: 2
P36HD17: RNCC: 5 | RNVC: 9

20 May 1972

5340-15-118-0364
Piastrino In Acciai

151180364
D0471779: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-15-136-9460
Tampone Ammortizzat

151369460
C0NICTSASC: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-107-2937
Accesso Coperchio

151072937
67534: RNCC: 3 | RNVC: 2

21 Mar 1996

5340-15-211-8769
Montante In Allumin

152118769
NB0015: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-213-8156
Serratura Zincata P

152138156
50421-60-1-2: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-154-7419
Serie Di Tubi Di Su

151547419
ZMD98XX-SYS027: RNCC: 3 | RNVC: 2

17 Sep 2001

5340-15-198-8654
Volantino Bloccaggi

151988654
0902065: RNCC: 3 | RNVC: 2
B14/05VOL: RNCC: 5 | RNVC: 2

23 Nov 2004

5340-15-105-6383
Collare Serraggio

151056383
10169290: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-001-9100
Piastrina Terminale

150019100
SF701: RNCC: 3 | RNVC: 2

18 Jul 2013

5340-15-067-9518
Portella Fissa Sx

150679518
53.217: RNCC: 3 | RNVC: 2
53.217: RNCC: 3 | RNVC: 2

8 Jul 1986

5340-15-109-7380
Control Rod

151097380
4770455: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-002-1648
Angle Bracket

150021648
5801371630: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-134-4208
Staffa

151344208
38818597: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-205-4943
Dust And Moisture Seal Protective Cap

152054943
182719410: RNCC: 3 | RNVC: 2
(241)A0199182719410: RNCC: 5 | RNVC: 2

14 Mar 2012

5340-15-115-6241
Resilient Mount

151156241
1420-60-802: RNCC: 3 | RNVC: 2

17 Dec 1992

5340-15-154-9350
Cover

151549350
CBD71102P01: RNCC: 3 | RNVC: 2

13 Nov 2001

5340-15-074-4342
Turnbuckle

150744342
2B76UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-198-2804
Support Plate

151982804
M775046: RNCC: 3 | RNVC: 2

14 Sep 2004

5340-15-074-4377
Turnbuckle

150744377
2C30UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-153-3162
Grooved Clamp Coupling

151533162
122649238: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-15-177-7192
Cylinder

151777192
03043974: RNCC: 3 | RNVC: 2

4 Jun 2004

5340-15-192-9664
Braccio Pieghevole

151929664
PK/ARM.1032: RNCC: 3 | RNVC: 2
(241)A3028PK/ARM.1032: RNCC: 5 | RNVC: 2

30 Mar 2010

5340-15-118-0859
Control Rod

151180859
D0487998: RNCC: 3 | RNVC: 2

16 Dec 1994

5340-15-119-7711
Nonmetallic Bumper

151197711
73127282: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-120-6862
Coperchio Per Grupp

151206862
D0483431: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-112-8379
Occhioa

151128379
466805: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-166-4926
Fermo

151664926
7613323: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-204-9584
Riduzione

152049584
647000000220: RNCC: 3 | RNVC: 2
(241)AK137647000000220: RNCC: 5 | RNVC: 2

2 Feb 2012

5340-15-157-5512
Resilient Mount

151575512
9597 480 00994: RNCC: 3 | RNVC: 2
(241)A0042959748000994: RNCC: 5 | RNVC: 2

19 Sep 2003

5340-15-170-5673
Spider

151705673
3901221: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-15-118-6728
Straight Fitting

151186728
RV892: RNCC: 3 | RNVC: 2

1 Jul 1994

Load More Results