What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 37 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 37 of 72

5340-15-198-8818
Assime Supporto

151988818
N941G4019102: RNCC: 3 | RNVC: 2
(241)A0126N941G4019101: RNCC: 5 | RNVC: 9
N941G4019101: RNCC: 5 | RNVC: 9

24 Nov 2004

5340-15-116-4868
Double Angle Bracket

151164868
60151127: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-118-0337
Piastrina Di Antisv

151180337
D0467857: RNCC: 3 | RNVC: 2

1 Dec 1994

5340-15-231-5685
Rinforzo Sx

152315685
534015E093106: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-170-3234
Nut And Bolt Locking Plate

151703234
D1404663: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-155-8874
Sostegno Elastico

151558874
MP-DNP-30: RNCC: 3 | RNVC: 2

13 Sep 2002

5340-15-108-2866
Turnbuckle

151082866
I/A10UNI2020: RNCC: 2 | RNVC: 2
2300-23002: RNCC: 3 | RNVC: 2
230023002: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-100-8107
Semicerniera

151008107
109-0640-52-127: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-15-045-3460
Turnbuckle

150453460
714-12-13: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-134-6347
Stoppini

151346347
8822168: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-106-7603
Staffetta

151067603
4629886: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-003-9097
Stand Base

150039097
182705233: RNCC: 3 | RNVC: 2
(241)A0199182705233: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-214-9440
Attacco Zincato

152149440
ATTACCO-ZINCATO: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-151-2614
Shock Mount Pad

151512614
00084919: RNCC: 3 | RNVC: 2

4 May 2000

5340-15-105-8180
Sostegno Elastico

151058180
23188: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-101-7439
Piastra Forata

151017439
P10: RNCC: 3 | RNVC: 2

4 Feb 1994

5340-15-007-6976
Cover Plate Access

150076976
1141-39-908: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-116-2746
Assieme Coperchio

151162746
190519905: RNCC: 3 | RNVC: 2

15 Apr 1993

5340-15-186-9146
Antipilferage Seal Locking Wire

151869146
381101: RNCC: 3 | RNVC: 2
381101: RNCC: 5 | RNVC: 9

5 Jan 2009

5340-15-231-1486
Staffa Fissaggio Bo

152311486
9150569280: RNCC: 3 | RNVC: 2
534015E085698: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-148-6537
Shock Mount Pad

151486537
257/B: RNCC: 3 | RNVC: 2
190521362: RNCC: 5 | RNVC: 2

17 Sep 1998

5340-15-105-8955
Tirante A Teste Fil

151058955
921.92: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-157-0780
Helical Compression Spring Seat

151570780
A328751: RNCC: 3 | RNVC: 2

30 Apr 2003

5340-15-120-3489
Double Angle Bracket

151203489
60175323: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-110-8410
Nut And Bolt Locking Plate

151108410
772619: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-221-4559
Catenaccio

152214559
EX5340RI7422352: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-105-6357
Collare Serraggio

151056357
23076: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-104-4331
Testa Tira Forcella

151044331
619474: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-210-8093
Supporto Alternator

152108093
93163441: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-136-0851
Ghiera

151360851
957414: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-166-4945
Pin

151664945
BT01A942A03001: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-215-1295
Molla

152151295
EX5340RN0651561: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-162-3170
Lock Cone .61-.90

151623170
22101912: RNCC: 3 | RNVC: 2

27 Jun 2001

5340-15-156-2026
Assy Base

151562026
(241)A3460CBD71154G01: RNCC: 3 | RNVC: 2
CBD71154G01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-123-9030
Confez.100 Pz Fasce

151239030
8AB004400: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-049-5211
Tubetto Distanziale

150495211
8-3025-114-32156-4: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-006-2734
Maniglia Speciale

150062734
0-33971: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-005-6157
Ghiera Speciale

150056157
0-15855: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-007-2855
Forcella A Flangia

150072855
4036380: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-205-7083
Attacco Molla A Gas

152057083
5387.PM.99.0082: RNCC: 3 | RNVC: 2
DE013.14.507: RNCC: 3 | RNVC: 2
(241)A53875387.PM.99.0082: RNCC: 5 | RNVC: 2

28 Mar 2012

5340-15-120-6708
Control Rod

151206708
D0470797: RNCC: 3 | RNVC: 2

10 Jul 1996

5340-15-064-7236
Rubber Bumper

150647236
8560291: RNCC: 3 | RNVC: 2

17 Nov 1983

5340-15-052-0421
Morsetto Serratubi

150520421
B740-20-22A: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-149-1798
Speciale Fascetta

151491798
2302-0120-001: RNCC: 3 | RNVC: 2

15 Dec 1998

5340-15-149-3797
Support

151493797
518-36-1270: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-15-192-1421
Bumper Rubber

151921421
7250-4X20: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-141-2455
Lucchetto Mm.30

151412455
L010.30.00: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-162-0175
Cover

151620175
G0012.0000: RNCC: 5 | RNVC: 2
G0012.0000: RNCC: 5 | RNVC: 9

15 Nov 2000

5340-15-159-4721
Padlock

151594721
PN UAS 00010039: RNCC: 3 | RNVC: 2
9999F76008754: RNCC: 5 | RNVC: 9

31 Mar 2004

5340-15-114-2532
Supporto

151142532
8253.15.47: RNCC: 3 | RNVC: 2

12 May 1993

5340-15-158-5850
Threaded End Tensioning Tie Rod

151585850
122607308: RNCC: 3 | RNVC: 2

9 Mar 2004

5340-15-114-0438
Dust And Moisture Seal Protective Cap

151140438
338891A1: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-135-6874
Fascetta

151356874
MS21029H12: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-105-8268
Tampone Ammortizzat

151058268
9919842: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-112-0470
Dispositivo Di Supp

151120470
252A2312-401: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-238-3018
Supporto Per Cassa

152383018
EE116: RNCC: 3 | RNVC: 2
534015E142475: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-121-7514
Staffa Portabombole

151217514
741403: RNCC: 3 | RNVC: 2

14 Feb 1996

5340-15-068-3366
Maniglia Di Bloccag

150683366
132521: RNCC: 3 | RNVC: 2

27 Oct 1985

5340-15-219-9734
Serratura Da Infila

152199734
10/70: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-113-8566
Threaded End Tensioning Tie Rod

151138566
1Z 584386: RNCC: 3 | RNVC: 2
1Z 584386: RNCC: 5 | RNVC: 9

13 Jun 1994

5340-15-151-4884
Nottolino Di Tenuta

151514884
IZA0ASC1513: RNCC: 3 | RNVC: 2

30 May 2000

5340-15-115-6969
Battuta Per Otturat

151156969
D0466491: RNCC: 3 | RNVC: 2

10 Mar 1994

5340-15-051-4219
Gancio

150514219
4549768: RNCC: 3 | RNVC: 2
4549768: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-113-2487
Staffacomplessivo

151132487
345A4275-401: RNCC: 3 | RNVC: 2

11 Apr 1991

5340-15-211-7969
Lucchetto Mm.90

152117969
LUCCHMM90: RNCC: 5 | RNVC: 3
LUCCHMM90: RNCC: 5 | RNVC: 9

16 Nov 2005

5340-15-133-0417
Spina - Pulsante

151330417
2761829: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-179-9142
Bracket

151799142
212-076-116-1: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-152-4799
Piastrina Di Sicure

151524799
14242301: RNCC: 3 | RNVC: 2

19 Sep 2000

5340-15-118-0427
Contenitore Guida

151180427
D0484644: RNCC: 3 | RNVC: 2

5 Dec 1994

5340-15-105-5997
Staffa A Gomito

151055997
1354709: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-136-7600
Inserto

151367600
V101112P: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-156-1846
Disco Di Protezione

151561846
60161560: RNCC: 3 | RNVC: 2
549191: RNCC: 5 | RNVC: 2
5083268: RNCC: 5 | RNVC: 2

11 Dec 2002

5340-15-216-4488
Chiavarda

152164488
EFTB12X60-12X320: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-212-4087
Maniglia Con Chiave

152124087
CGEE/054000-126: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-102-1033
Snap Hook

151021033
193-0487/20: RNCC: 3 | RNVC: 2

22 Jun 1986

5340-15-115-5450
Coperchietto Poster

151155450
D0469157: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-109-2963
Manigliapernomobile

151092963
60139558: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-166-4767
Mezza Cerniera Este

151664767
66447115: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-235-8837
Tenditore Rampa Di

152358837
R3A30R33: RNCC: 3 | RNVC: 2
534015E123831: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-174-8686
Fermafascette Inox

151748686
187-0456: RNCC: 3 | RNVC: 2

17 Oct 2003

5340-15-105-8177
Sostegno Elastico

151058177
503-03-3057: RNCC: 5 | RNVC: 2
503-03-3057: RNCC: 5 | RNVC: 9

30 May 1989

5340-15-179-7204
Multiple Angle Bracket

151797204
00185037: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-115-2308
End Stop Special

151152308
518022740: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-115-7065
Coperchio

151157065
D1401527: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-103-1115
Threaded End Tensioning Tie Rod

151031115
L9265096: RNCC: 3 | RNVC: 2
DE160.03.230: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-188-0114
Assy Hinge

151880114
A-082571-007: RNCC: 3 | RNVC: 2

16 Jun 2009

5340-15-108-0923
Luftfilterfas

151080923
A30655-01-08: RNCC: 3 | RNVC: 2
A30655-01-08: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-155-9643
Staffa Per Tubazion

151559643
99453771: RNCC: 3 | RNVC: 2
A322013-005: RNCC: 5 | RNVC: 2

17 Oct 2002

5340-15-110-8006
Cernierasportello

151108006
66200-901A01: RNCC: 3 | RNVC: 2
66200-901A1: RNCC: 5 | RNVC: 2

1 Aug 1990

5340-15-206-5802
Sostegno Elastico

152065802
MG-DP90: RNCC: 3 | RNVC: 2
(241)A4997MG-DP90: RNCC: 5 | RNVC: 2

26 Jun 2012

5340-15-201-7131
Dashpot

152017131
164802010: RNCC: 3 | RNVC: 2
(241)A0199164802010: RNCC: 5 | RNVC: 2

27 Nov 2006

5340-15-118-3864
Resilient Mount

151183864
60158446: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-118-2847
Guida Tirante

151182847
D0485437: RNCC: 3 | RNVC: 2

20 Apr 1995

5340-15-118-6632
Anello

151186632
75216956: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-109-5304
Dust And Moisture Seal Protective Plug

151095304
GB488-006-000: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-178-4935
Dust And Moisture Seal Protective Cap

151784935
308190-009: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-180-7233
Cover

151807233
212-1600-01-107: RNCC: 3 | RNVC: 2
(241)A0126212-1600-01-107: RNCC: 5 | RNVC: 2

9 Jul 2008

5340-15-107-6589
Corpi Accesso

151076589
X551541: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-178-9923
Hinge Support

151789923
RS 404 611: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-137-3849
Anello Elastico Ass

151373849
A28559: RNCC: 3 | RNVC: 2
A28559: RNCC: 5 | RNVC: 9

9 Oct 1996

5340-15-156-4039
Speciale Lamiera

151564039
142057335: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-169-4194
Lucchetto Pic

151694194
F72011837: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-007-7882
Ammortizzatore

150077882
B39T3: RNCC: 3 | RNVC: 2

10 May 1980

5340-15-116-5220
Dust And Moisture Seal Protective Plug

151165220
60111-007: RNCC: 3 | RNVC: 2

18 Nov 1993

5340-15-149-4000
Door Assy

151494000
518-33-0140: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-15-120-6405
Handwheel

151206405
D0370608: RNCC: 3 | RNVC: 2

1 May 1996

5340-15-118-0892
Resilient Mount

151180892
D0480243: RNCC: 3 | RNVC: 2

20 Dec 1994

5340-15-118-0329
Supporto Inferiore

151180329
D0467834: RNCC: 3 | RNVC: 2

15 Nov 1994

5340-15-120-6819
Coperchio Valvole

151206819
D0487159: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-101-2199
Handwheel

151012199
482407: RNCC: 3 | RNVC: 2
282640ITEM115: RNCC: 5 | RNVC: 2

4 Jun 1987

5340-15-074-4177
Turnbuckle

150744177
2A10UNI2019AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-174-6572
Terminal Board Side

151746572
9903905426: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-15-074-4159
Turnbuckle

150744159
2D30UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-074-4100
Turnbuckle

150744100
1C16UNI2018A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-074-4194
Turnbuckle

150744194
1B27UNI2019A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-075-3824
Anello Elastico Dis

150753824
12UNI3653: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-116-1586
Piastrinadibloccagg

151161586
DPR23780/3-18: RNCC: 3 | RNVC: 2

13 Oct 1993

5340-15-162-2762
Dust And Moisture Seal Protective Plug

151622762
60-10825-00: RNCC: 3 | RNVC: 2

4 Jun 2001

5340-15-105-2963
Poker

151052963
1500/IC/III-08.09.58-54-US: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-100-4133
Resilient Mount

151004133
4576957: RNCC: 3 | RNVC: 2
23988: RNCC: 5 | RNVC: 2

14 Sep 1999

5340-15-214-0927
Lucchetto Corazzato

152140927
159509: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-118-1106
Nonrotating Shaft Eye Bracket

151181106
1Q 289174: RNCC: 3 | RNVC: 2
1Q 289174: RNCC: 5 | RNVC: 9

30 Jan 1995

5340-15-210-9929
Teflon In Nastro

152109929
TEFLON IN NASTRO: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-166-4844
Molla

151664844
5443516: RNCC: 3 | RNVC: 2
5443516: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-068-4385
Compasso Speciale

150684385
SH 4255-401: RNCC: 3 | RNVC: 2

9 Oct 1986

5340-15-115-9261
Tappoconanodo

151159261
60982/59644P11: RNCC: 3 | RNVC: 2

9 Feb 1996

5340-15-206-2607
Key Blank

152062607
LITTO-LT4: RNCC: 3 | RNVC: 2

1 Jun 2012

5340-15-115-7036
Targhetta Con Fine

151157036
D0470146: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-136-1241
Staffa

151361241
4430779: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-163-0031
Access Door

151630031
RS 422 420 AE: RNCC: 3 | RNVC: 2

16 Apr 2002

5340-15-009-0486
Helical Compression Spring Seat

150090486
4601302: RNCC: 3 | RNVC: 2

16 Apr 1980

5340-15-009-0901
Rubber Bumper

150090901
8557658: RNCC: 3 | RNVC: 2
821DN0019: RNCC: 5 | RNVC: 2

1 Jun 1987

5340-15-151-1433
Kit Di Installazion

151511433
181-1661/01: RNCC: 3 | RNVC: 2

30 Mar 2000

5340-15-204-3253
Tampone

152043253
0000500429797: RNCC: 3 | RNVC: 2
(241)A39630000500429797: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-000-4010
Stand Base

150004010
29.00733.13: RNCC: 3 | RNVC: 2

27 Feb 2013

5340-15-179-1375
Tappo Otturatore

151791375
16990570: RNCC: 3 | RNVC: 2
(241)A424916990570: RNCC: 5 | RNVC: 2

13 Jun 2006

5340-15-008-5435
Scrocco Completo

150085435
4478671: RNCC: 3 | RNVC: 2
4478671: RNCC: 5 | RNVC: 9

29 Sep 1980

5340-15-059-5376
Lock

150595376
TAV016: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-168-9408
Padlock

151689408
F72001543: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-074-4152
Turnbuckle

150744152
2D8UNI2018ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-068-6462
Cover Plate Access

150686462
W010657: RNCC: 3 | RNVC: 2
(7001)5340150686462: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-177-5169
Holder

151775169
340-5742/02: RNCC: 3 | RNVC: 2

17 Apr 2004

5340-15-116-8479
Control Rod

151168479
D1402135: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-15-103-8531
Tassello Elastico

151038531
8585876: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-051-4084
Staffa

150514084
4553830: RNCC: 3 | RNVC: 2
4553830: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-055-6555
Staffetta Sostegno

150556555
545581: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-124-1713
Tappo Di Protezione

151241713
TP500080201C280504: RNCC: 3 | RNVC: 2
TP500080201C280504: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-117-5346
Tirante Speciale

151175346
802700003: RNCC: 3 | RNVC: 2

9 Nov 1993

5340-15-139-3637
Tappo

151393637
41800595: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-055-6789
Supporto Coperchio

150556789
540531: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-003-9101
Stand Base

150039101
182707035: RNCC: 3 | RNVC: 2
(241)A0199182707035: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-156-1346
Double Angle Bracket

151561346
378-025-007: RNCC: 3 | RNVC: 2

3 Dec 2002

5340-15-180-3957
Reinforcement Ring

151803957
N925G9183201: RNCC: 3 | RNVC: 2

12 May 2008

5340-15-180-0855
Pipe Covering Protection Saddle

151800855
31043067: RNCC: 3 | RNVC: 2

28 Jan 2008

5340-15-196-8967
Nut And Bolt Retainer

151968967
PN UAS 00014011: RNCC: 3 | RNVC: 2
5310F76022509: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-206-3342
Utility Resilient Mount

152063342
4502492: RNCC: 3 | RNVC: 2

4 Jun 2012

5340-15-155-4851
Protection Ring

151554851
CBD71185P04: RNCC: 3 | RNVC: 2

27 Mar 2002

5340-15-100-5003
Resilient Mount

151005003
638101: RNCC: 3 | RNVC: 2
638101: RNCC: 5 | RNVC: 9

8 Mar 1984

5340-15-107-1727
Hinge Left Hand

151071727
RS412298A: RNCC: 3 | RNVC: 2

24 May 1989

5340-15-122-5545
Fork

151225545
01TL21200-03: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-119-7616
Cover Assy

151197616
294216-G1: RNCC: 3 | RNVC: 2
294216-G1: RNCC: 5 | RNVC: 2
294216-G1: RNCC: 5 | RNVC: 9

17 Nov 1994

5340-15-105-8175
Sostegno Elastico

151058175
22011: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-108-4559
Tappo Speciale

151084559
109-8101-48-1: RNCC: 3 | RNVC: 2

23 Jun 1988

5340-15-040-3387
Molla A Compression

150403387
5-5243-2-01-28795-1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-045-3700
Semighiera

150453700
748-12-02: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-121-3977
Supporto Complessiv

151213977
129-0011-28-105: RNCC: 3 | RNVC: 2

11 Dec 1995

5340-15-147-6728
Cerniera

151476728
311A2934-003: RNCC: 3 | RNVC: 2

26 Feb 1998

5340-15-156-3865
Dus Protective Plug

151563865
CBD71353P01: RNCC: 3 | RNVC: 2
(241)A3460CBD71353P01: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-119-5430
Piastra Forata

151195430
D0494464: RNCC: 3 | RNVC: 2

24 Mar 1995

5340-15-151-1699
Fissaggi Serbatoio

151511699
AF060182005: RNCC: 3 | RNVC: 2

14 Apr 2000

5340-15-216-8613
Banda Frenante

152168613
9017556: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-215-0267
Collare

152150267
CLS48: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-156-3622
Air Catc Protection

151563622
(241)A3460CBD71199G01: RNCC: 3 | RNVC: 2
CBD71199G01: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-182-4751
Filo Plastificato

151824751
PLASTIFICATO: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-147-3747
Clamp

151473747
375-47: RNCC: 3 | RNVC: 2
375-47: RNCC: 5 | RNVC: 9

31 Oct 1997

5340-15-166-4757
Anello Di Tenuta

151664757
A31658: RNCC: 1 | RNVC: 2
A31658: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-156-6450
Fl Mounting Plate

151566450
215X80MM: RNCC: 3 | RNVC: 2

3 Mar 2003

5340-15-204-6547
Corrosion Preventive Anode

152046547
410-500-045: RNCC: 3 | RNVC: 2
(241)A1823410-500-045: RNCC: 5 | RNVC: 2

5 Dec 2011

5340-15-136-2362
Bottone

151362362
7532275: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-139-5303
Tirante

151395303
8558093: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-158-5805
Copertura In Gomma

151585805
122644316: RNCC: 3 | RNVC: 2

9 Mar 2004

5340-15-189-3152
Duct Gasket

151893152
012137110: RNCC: 3 | RNVC: 2

11 Feb 2010

5340-15-101-8948
Electrical-Me Post

151018948
1Q263189: RNCC: 3 | RNVC: 2
1Q263189: RNCC: 5 | RNVC: 9

25 Nov 1992

5340-15-136-7049
Alberino

151367049
204-030-485-5: RNCC: 3 | RNVC: 2

13 Oct 1998

5340-15-061-6208
Striscia Fissaggio

150616208
109-0616-02-63: RNCC: 3 | RNVC: 2

20 Dec 1976

5340-15-127-5475
Guarnizione

151275475
882954: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-122-5578
Rear Cover

151225578
01TL21029-03: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-109-4821
Helical Compression Spring Seat

151094821
1P 533175: RNCC: 3 | RNVC: 2
1P 533175: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-175-6192
Morsetto Di Massa A

151756192
ART616: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-199-4129
Rubber Bumper

151994129
FCGG125700: RNCC: 3 | RNVC: 2
(241)A0178FCGG125700: RNCC: 5 | RNVC: 2

22 Mar 2005

5340-15-126-4930
Molla

151264930
TTA65: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-074-4079
Turnbuckle

150744079
2B20UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-112-8213
Gruppos

151128213
D0385436: RNCC: 3 | RNVC: 2
385436: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-156-3602
Upper Support

151563602
(241)A3460CBD71402P05: RNCC: 3 | RNVC: 2
CBD71402P05: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-064-7188
Luggage Bumper

150647188
SC.2015.216: RNCC: 3 | RNVC: 2

21 Nov 1983

5340-15-001-7988
Angle Bracket

150017988
500407838: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-009-1475
Helical Compression Spring Seat

150091475
759073: RNCC: 3 | RNVC: 2
759073: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-194-7826
Manual Control Lever

151947826
50167: RNCC: 3 | RNVC: 2
(241)A348850167: RNCC: 5 | RNVC: 2

14 Jan 2011

5340-15-116-4865
Double Angle Bracket

151164865
60164840: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-186-5279
Clevis

151865279
5Q57B1: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-174-6606
Terminal Board Side

151746606
9903905756: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-15-148-3903
Dashpot

151483903
48510-87Z03-000: RNCC: 3 | RNVC: 2

10 Aug 1998

5340-15-118-0363
Staffa In Plastica

151180363
472040: RNCC: 3 | RNVC: 2
D0472040: RNCC: 3 | RNVC: 2

14 Dec 1994

5340-15-100-4678
Copriaccesso

151004678
73611F91: RNCC: 3 | RNVC: 2
73611F91: RNCC: 3 | RNVC: 2
73611F91: RNCC: 5 | RNVC: 2
73611F91: RNCC: 5 | RNVC: 9

21 Mar 1996

5340-15-026-3391

5340-15-166-5094
Assieme Supporto

151665094
44271001: RNCC: 3 | RNVC: 2
44271001: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-105-6356
Collare Serraggio

151056356
4595799: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-166-4874
Piedino

151664874
000925: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-188-2787
Shipping And Storage Container Twistlock

151882787
1.K01.A: RNCC: 3 | RNVC: 2

1 Sep 2009

5340-15-102-2304
Tenditore Complessi

151022304
223A3053-403: RNCC: 3 | RNVC: 2

9 Jun 1988

5340-15-051-4264
Anello

150514264
9911946: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-117-0062
Tampon Sur Bras

151170062
8285989: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-157-7249
Turnbuckle

151577249
ARRIDATOIO INOX UNI2018 12MMCORT: RNCC: 3 | RNVC: 2

16 Oct 2003

5340-15-155-4462
Clamping Handle

151554462
CBD70717P15: RNCC: 3 | RNVC: 2

25 Mar 2002

5340-15-188-8364
Corrosion Preventive Anode

151888364
1P 702450: RNCC: 3 | RNVC: 2

26 Nov 2009

5340-15-110-5766
Coperchio Accesso

151105766
532194: RNCC: 2 | RNVC: 2
1R 532194: RNCC: 3 | RNVC: 2
1R 532194: RNCC: 5 | RNVC: 9
532194: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-105-8196
Sostegno Elastico

151058196
3197: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-166-4872
Serratura Elettrica

151664872
CISA12V: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-218-3983
Serratura Antipanic

152183983
945011: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-117-5900
Resilient Mount

151175900
VZA/D/AV/90: RNCC: 3 | RNVC: 2

4 Nov 1994

5340-15-232-9584
Tassello Con Occhie

152329584
SLM8 C/OCCHIELLO: RNCC: 3 | RNVC: 2

19 Jul 2007

5340-15-166-5186
Fascette In Cf.

151665186
2105567: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-199-5813
Anodo

151995813
44206001: RNCC: 3 | RNVC: 2
(241)A014744206001: RNCC: 5 | RNVC: 2

4 May 2005

5340-15-166-5216
Pinion

151665216
130320: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-194-7850
Assieme Perno Blocc

151947850
52058: RNCC: 3 | RNVC: 2
(241)A348852058: RNCC: 5 | RNVC: 2

14 Jan 2011

5340-15-000-3430
Seal Retaining Plate

150003430
30037: RNCC: 3 | RNVC: 2
7404805: RNCC: 5 | RNVC: 2

22 Feb 2013

5340-15-158-0407
Complessi Morsetto

151580407
T0003946: RNCC: 3 | RNVC: 2

15 Dec 2003

5340-15-157-3945
Resilient Mount

151573945
1CC502208: RNCC: 3 | RNVC: 2

7 Jul 2003

5340-15-179-6772
Access Door

151796772
0000500401776: RNCC: 3 | RNVC: 2
(241)A39630000500401776: RNCC: 5 | RNVC: 2

7 Jun 2007

5340-15-109-1500
Doorknob

151091500
33.5017: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-15-180-8345
En Bracket Assembly

151808345
N714G1041101: RNCC: 3 | RNVC: 2
(241)A0126N714G1041101: RNCC: 5 | RNVC: 2

28 Jul 2008

5340-15-152-1531
Staffetta Di Fissag

151521531
99475426: RNCC: 3 | RNVC: 2

8 Aug 2000

5340-15-120-4587
Supportoseparatored

151204587
145377-1: RNCC: 3 | RNVC: 2

29 May 1995

5340-15-117-1509
Assieme Staffa Di M

151171509
T0063677: RNCC: 5 | RNVC: 2
01131H110340: RNCC: 5 | RNVC: 2
01131H110340: RNCC: 5 | RNVC: 9

10 Aug 1993

5340-15-118-9978
Anchor Strap

151189978
9817811: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-122-8336
Flessibile

151228336
2710520065N: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-121-6146
Tube Fourche

151216146
8G0055512: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-066-7588
Supporto Antivibran

150667588
371147: RNCC: 2 | RNVC: 2

7 May 1996

5340-15-178-2866
Bush

151782866
500336108: RNCC: 3 | RNVC: 2
8162306: RNCC: 3 | RNVC: 2
8162306: RNCC: 5 | RNVC: 2
500336108: RNCC: 5 | RNVC: 2
8162306: RNCC: 5 | RNVC: 2

29 Apr 2005

5340-15-185-7015
Fisher In Metallo D

151857015
FISHERMETALLO/DIAM.M6: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-193-8180
Shock Absorber

151938180
SPE-J-943-A-9001/201N: RNCC: 3 | RNVC: 2
(241)A0019SPE-J-943-A-9001/201N: RNCC: 5 | RNVC: 2

19 Jul 2010

5340-15-118-6844
Half Hinge

151186844
109-0711-80-113: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-109-4421
Dispositivo Di Fiss

151094421
302-0027/02: RNCC: 3 | RNVC: 2

21 Apr 1989

5340-15-111-6107
Handle

151116107
217-004/86: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-232-9589
Tassello In Metallo

152329589
BU 12 W18: RNCC: 3 | RNVC: 2
534015E129538: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-158-5927
Resilient Mount

151585927
162531104: RNCC: 3 | RNVC: 2

9 Mar 2004

5340-15-159-4719
Padlock Set

151594719
PN UAS 00002424: RNCC: 3 | RNVC: 2
5340F76015954: RNCC: 5 | RNVC: 9

31 Mar 2004

5340-15-118-0482
Flangia Per Base Co

151180482
D0488116: RNCC: 3 | RNVC: 2

18 Nov 1994

5340-15-102-8853
Accesso Coperchio

151028853
1Q547036: RNCC: 3 | RNVC: 2
1Q547036: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-112-9761
Resilient Mount

151129761
84061: RNCC: 3 | RNVC: 2

8 Mar 1991

5340-15-109-5753
Resilient Mount

151095753
15610701A: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-127-4530
Puntalino Avv Molla

151274530
851781: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-068-2541
Piastrina Forata

150682541
RS 400 261: RNCC: 3 | RNVC: 2

27 Oct 1984

5340-15-105-2082
Rubber Bumper

151052082
4115532: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-187-0490
Hd Cover And Anode

151870490
290074.00: RNCC: 3 | RNVC: 2

6 Feb 2009

5340-15-108-6332
Resilient Mount

151086332
8587030: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-065-7254
Fermo Sedile

150657254
109-0700-73-1: RNCC: 3 | RNVC: 2

16 Dec 1984

5340-15-222-2313
Montante 2 Ipe 400

152222313
S1-135B: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-139-3673
Tirante

151393673
42007029: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-051-2806
Nut And Bolt Retainer

150512806
895872: RNCC: 3 | RNVC: 2
895872: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-174-6303
Mechanic Equipment Hardware Kit

151746303
7225500127: RNCC: 3 | RNVC: 2
(241)A16247225500127: RNCC: 5 | RNVC: 2

17 Jul 2003

5340-15-215-4370
Tirante Per Catena

152154370
DIAMETRO7LUNGHEZZA15: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-230-7360
Paletto Chiusura

152307360
TLP37502: RNCC: 3 | RNVC: 2
534015E102670: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-063-6372
Cover Plate Access

150636372
820.31: RNCC: 3 | RNVC: 2
9926198: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-154-9312
Protective Cover

151549312
CBD71012P01: RNCC: 3 | RNVC: 2

13 Nov 2001

5340-15-202-6581
Aggancio Completo

152026581
RF407108AE: RNCC: 3 | RNVC: 2
(241)A1508RF407108AE: RNCC: 5 | RNVC: 2

12 Jun 2007

5340-15-156-6554
Corrosion Preventive Anode

151566554
4129412: RNCC: 3 | RNVC: 2

3 Mar 2003

5340-15-115-1811
Valve Nut

151151811
540528: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-159-4729
Padlock

151594729
PN UAS 00000271: RNCC: 3 | RNVC: 2
5340F76009953: RNCC: 5 | RNVC: 9

31 Mar 2004

5340-15-136-7590
Inserto

151367590
SA026V: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-116-8581
Supporto Manometro

151168581
D0471105: RNCC: 3 | RNVC: 2

8 Apr 1994

5340-15-156-3855
Ring Oil Drift Assy

151563855
(241)A3460CBD71353G01: RNCC: 3 | RNVC: 2
CBD71353G01: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-191-8407
Lucchetto A Combina

151918407
3533253: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-163-1146
Coupling

151631146
3008331: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-166-5118
Spacer

151665118
Z015234M3C2: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-151-5232
Dust And Moisture Seal Protective Plug

151515232
016985401: RNCC: 3 | RNVC: 2
016985401: RNCC: 4 | RNVC: 1
1PA39630-117061: RNCC: 5 | RNVC: 2
(241)A39630-117061: RNCC: 5 | RNVC: 2
(241)A396300117061: RNCC: 5 | RNVC: 2
0-117061: RNCC: 5 | RNVC: 2

1 Jun 2000

5340-15-063-6140
Cover Plate Access

150636140
4702959: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-179-5890
Buckle

151795890
0400091: RNCC: 3 | RNVC: 2

11 Apr 2007

5340-15-156-3847
Plugging Plate

151563847
(241)A3460CBD71342P03: RNCC: 3 | RNVC: 2
CBD71342P03: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-166-5135
Maniglie Lucide Con

151665135
MNGCLAS: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-168-9675
Padlock

151689675
F72003495: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-103-1953
Cinturino Staffa

151031953
DE013.13.360: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-105-6297
Collare Serraggio

151056297
4018405: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-230-2414
Staffa Fissaggio Tu

152302414
315629F91: RNCC: 3 | RNVC: 2
534015E117063: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-230-2564
Staffa

152302564
311488F91: RNCC: 3 | RNVC: 2
534015E146679: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-005-1915
Dust And Moisture Seal Protective Cap

150051915
1382482: RNCC: 3 | RNVC: 2
1382482: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-109-5759
Double Angle Bracket

151095759
20530774A: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-066-2750
Access Cover Plate

150662750
1376-19-304: RNCC: 3 | RNVC: 2
137619304: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-147-7879
Filtre

151477879
3297-40G: RNCC: 3 | RNVC: 2

10 Apr 1998

5340-15-163-1879
Support

151631879
1308163080: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-166-4966
Insert Screw-Th (Ca

151664966
7210096509: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-139-7815
Chiavistello

151397815
1000557: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-074-4332
Turnbuckle

150744332
2B27UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-135-4467
Fascetta

151354467
MS21029H6: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-136-0492
Boccola Asta Cofano

151360492
4392448: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-187-8814
Retainer

151878814
00621R0230: RNCC: 3 | RNVC: 2
62123: RNCC: 3 | RNVC: 2

19 May 2009

5340-15-182-4698
Supporto Porta Fres

151824698
SUPPORTOFRESA: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-007-9138
Resilient Mount

150079138
4576739: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-156-3702
Plugging Plate

151563702
(241)A3460CBD71331P01: RNCC: 3 | RNVC: 2
CBD71331P01: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-156-3370
Base

151563370
(241)A3460CBD71232P01: RNCC: 3 | RNVC: 2
CBD71232P01: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-15-051-4277
Staffetta

150514277
4514188: RNCC: 3 | RNVC: 2
4514188: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-231-9167
Molletta

152319167
17498874: RNCC: 3 | RNVC: 2
534015E115745: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-109-8817
Staffaspeciale

151098817
60127813: RNCC: 3 | RNVC: 2

15 Oct 1988

5340-15-142-5248
Antivibrante

151425248
AT672-S.A.MI.30-30: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-113-2484
Rinforzoserbatoiono

151132484
345A4273-401: RNCC: 3 | RNVC: 2

15 Apr 1991

5340-15-112-8527
Ritegnos

151128527
471703: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-105-6363
Collare Serraggio

151056363
4605755: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-139-7994
Catenella Completa

151397994
1001776: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-219-9578
Carrucola In Ottone

152199578
CARRUCOLA60MM CON GANCIO: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-178-7402
Manual Control Lever

151787402
040089: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-156-3688
Deoiler Plug

151563688
(241)A3460CBD71336G01: RNCC: 3 | RNVC: 2
CBD71336G01: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-148-7420
Access Cover

151487420
0M08223000: RNCC: 3 | RNVC: 2

28 Sep 1998

5340-15-180-5947
Cerniera

151805947
122606508: RNCC: 3 | RNVC: 2
(241)A0199122606508: RNCC: 5 | RNVC: 2

24 Jun 2008

5340-15-120-6961
Sede Raccordo

151206961
D0454441: RNCC: 3 | RNVC: 2

4 Jul 1996

5340-15-074-4043
Turnbuckle

150744043
2A52UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-106-3645
Coperchio Fermo

151063645
3610380: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-157-4215
Traversa Per Tampon

151574215
21505699: RNCC: 3 | RNVC: 2

14 Jul 2003

5340-15-127-6404
Staffetta Fis.Tubaz

151276404
735860: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-197-7059
Gancio Sollevamento

151977059
510790: RNCC: 3 | RNVC: 2

20 Apr 2004

5340-15-193-5741
Electric Board

151935741
150-6405: RNCC: 3 | RNVC: 2

15 Jun 2010

5340-15-149-3422
Resilient Mount

151493422
60158394: RNCC: 3 | RNVC: 2
142060806: RNCC: 8 | RNVC: 2

2 Feb 1999

5340-15-121-7365
Bracket

151217365
858.252: RNCC: 3 | RNVC: 2
BOF22032: RNCC: 5 | RNVC: 2
858.252: RNCC: 5 | RNVC: 2

6 Feb 1996

5340-15-189-1859
Sealing Plug Assembly

151891859
109-0445-48-101: RNCC: 3 | RNVC: 2

2 Feb 2010

5340-15-177-4898
Sliding Shoe

151774898
D1421077: RNCC: 3 | RNVC: 2
(241)A0461D1421077: RNCC: 5 | RNVC: 2

27 Aug 2004

5340-15-066-4771
Acqu Serbatoio Inox

150664771
8500494/C4: RNCC: 3 | RNVC: 2

4 Mar 1986

5340-15-115-6013
Fascetta Tubo Scari

151156013
871940034: RNCC: 3 | RNVC: 2

10 Dec 1992

5340-15-118-2026
Turnbuckle

151182026
17720111: RNCC: 3 | RNVC: 2

22 Apr 1994

5340-15-206-3046
Rod Retainer Clip

152063046
30054063: RNCC: 3 | RNVC: 2
Z09.02.14.00: RNCC: 5 | RNVC: 2
5325PL0911689: RNCC: 6 | RNVC: 9

1 Jun 2012

5340-15-200-7586
Resilient Mount

152007586
5030: RNCC: 3 | RNVC: 2
(241)A31215030: RNCC: 5 | RNVC: 2

22 Feb 2006

5340-15-156-9572
Padlock

151569572
16050050: RNCC: 3 | RNVC: 2

24 Mar 2003

5340-15-151-0650
Nonmetallic Solid Wheel

151510650
089080004: RNCC: 3 | RNVC: 2

7 Mar 2000

5340-15-009-5828
Helical Compression Spring Seat

150095828
72365510: RNCC: 3 | RNVC: 2
9927801: RNCC: 5 | RNVC: 2
72365510: RNCC: 5 | RNVC: 9

22 Sep 1979

5340-15-202-9078
Dust And Moisture Seal Protective Cap

152029078
306074: RNCC: 3 | RNVC: 2
(241)A0810306074: RNCC: 5 | RNVC: 2

19 Sep 2007

5340-15-068-7415
Dust And Moisture Seal Protective Cap

150687415
OM05311000: RNCC: 3 | RNVC: 2
125521019: RNCC: 5 | RNVC: 2

22 Aug 1986

5340-15-109-5743
Dust And Moisture Seal Protective Plug

151095743
41770737A: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-149-1185
Dispos.Bloccaggio

151491185
60187923: RNCC: 3 | RNVC: 2
(241)AF90860187923: RNCC: 5 | RNVC: 2
60187923: RNCC: 5 | RNVC: 2

2 Dec 1998

5340-15-122-2168
Ensemble Carter

151222168
800058861: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-137-2010
Elemento

151372010
97-16-13P: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-179-2290
Shaft Bracket

151792290
10522030: RNCC: 3 | RNVC: 2

10 Aug 2006

5340-15-009-0458
Helical Compression Spring Seat

150090458
8822963: RNCC: 3 | RNVC: 2

16 Apr 1980

5340-15-147-0034
Tacchetto Di Guida

151470034
HTR1114: RNCC: 3 | RNVC: 2

4 Sep 1997

5340-15-215-0832
Ruota Gommata

152150832
531109: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-105-6330
Collare Serraggio

151056330
4514442: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-175-4187
Cerniera Maschio

151754187
035413021: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-120-3350
Double Angle Bracket

151203350
92300150239: RNCC: 3 | RNVC: 2
93158887: RNCC: 5 | RNVC: 2

30 Mar 1995

5340-15-148-0634
Assieme Fascetta Sp

151480634
9CA4040A221-401: RNCC: 3 | RNVC: 2

16 Jun 1998

5340-15-127-4078
Molla Richiamo Leva

151274078
1740-15-005: RNCC: 3 | RNVC: 2
1740-15-005: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-116-9649
Seat

151169649
W019736: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-124-8813
Supporto Alternator

151248813
RC0315095F91: RNCC: 3 | RNVC: 2
RC0315095F91: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-074-4197
Turnbuckle

150744197
1B8UNI20190T60-2012A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-124-1741
Coperture Di Plasti

151241741
31-925: RNCC: 3 | RNVC: 2
31-925: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-205-7781
Assieme Contatto

152057781
182724056: RNCC: 3 | RNVC: 2
(241)A0199182724056: RNCC: 5 | RNVC: 2

3 Apr 2012

5340-15-156-2079
Plate

151562079
(241)A3460CBD71206P03: RNCC: 3 | RNVC: 2
CBD71206P03: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-199-1860
Manicotto Per Cavo

151991860
COD.04.566.10: RNCC: 3 | RNVC: 2

31 Jan 2005

5340-15-112-0542
Dispositivo Di Supp

151120542
233A1110-401: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-100-6937
Resilient Mount

151006937
37M022P001: RNCC: 3 | RNVC: 2

1 Jul 1989

5340-15-217-0498
Pomo

152170498
POMO: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-198-4940
Anello Aggancio Pis

151984940
D0475769: RNCC: 3 | RNVC: 2
(241)A0461D0475769: RNCC: 5 | RNVC: 2

7 Oct 2004

5340-15-006-0142
Anchor Strap

150060142
B512TL162: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-193-3894
Piastra Di Montaggi

151933894
504291296: RNCC: 3 | RNVC: 2
(241)A4249504291296: RNCC: 5 | RNVC: 2

11 May 2010

5340-15-009-1476
Nut And Bolt Locking Plate

150091476
1382866: RNCC: 3 | RNVC: 2

23 Sep 1979

5340-15-009-6082
Helical Compression Spring Seat

150096082
75492110: RNCC: 3 | RNVC: 2
9982412: RNCC: 5 | RNVC: 2
75492110: RNCC: 5 | RNVC: 9

22 Sep 1979

5340-15-002-6312
Headless Straight Rod

150026312
182713901: RNCC: 3 | RNVC: 2

11 Sep 2013

5340-15-119-7931
Nonmetallic Bumper

151197931
73116394: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-114-3819
Pomello Nero

151143819
N3773122AS: RNCC: 3 | RNVC: 2

9 Jun 1992

5340-15-186-3910
Stecche Grigie Per

151863910
GRSTEC2G: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-005-6608
Cover Plate Access

150056608
4163971: RNCC: 3 | RNVC: 2
4163971: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-055-1262
Cinghia Metallica

150551262
71011A: RNCC: 3 | RNVC: 2

5 May 1972

5340-15-105-6290
Collare Serraggio

151056290
563678: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-112-8442
Battutaperm

151128442
469749: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-112-1376
Supportofiltri

151121376
DE013.14.378: RNCC: 3 | RNVC: 2

12 Feb 1991

5340-15-137-0880
Fascetta

151370880
66676: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-209-5884
Chiudiporta Cisa

152095884
CISA42210: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-122-0444
Output Shaf Support

151220444
874133: RNCC: 3 | RNVC: 2

23 Apr 1996

5340-15-122-5580
Plate Actua

151225580
01TL21038-03: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-136-0032
Tappo

151360032
L100502: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-144-9623
Doorstop

151449623
60023: RNCC: 3 | RNVC: 2
60023: RNCC: 5 | RNVC: 2
93194661: RNCC: 5 | RNVC: 2

24 Feb 1997

5340-15-068-2317
Anchor Strap

150682317
W012200: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-238-1326
Morsetto Doppio Mul

152381326
53001: RNCC: 3 | RNVC: 2
534015E075795: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-109-4324
Copertura Rigida Co

151094324
60125910: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-074-4169
Turnbuckle

150744169
1A22UNI2019A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-074-4299
Turnbuckle

150744299
2A80UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-113-9939
Calotta Stella Late

151139939
D0473273: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-15-006-5027
Resilient Mount

150065027
W002025A: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-178-2577
Plate

151782577
C7259-W94-N1: RNCC: 3 | RNVC: 2

29 Apr 2005

5340-15-155-0408
Ghiera Per Impugnat

151550408
1PA91722040914003000: RNCC: 3 | RNVC: 2
2040914003000: RNCC: 3 | RNVC: 2

8 Jan 2002

5340-15-074-4285
Turnbuckle

150744285
2A16UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-138-2243
Tenditore Ad Occhio

151382243
TE20C00100: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-139-9200
Staffa Portafanale

151399200
C71RA: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-236-5123
Catenaccio Portaluc

152365123
534015E015384: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-008-6227
Metallic Seal

150086227
116724: RNCC: 3 | RNVC: 2

2 Oct 1981

5340-15-199-0467
Saldata Staffa

151990467
157725905: RNCC: 3 | RNVC: 2
(241)A0199157725905: RNCC: 5 | RNVC: 2

9 Jan 2005

5340-15-214-8781
Cerniera In Acciaio

152148781
40X40: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-206-1163
Pattino Di Metallo

152061163
70806: RNCC: 3 | RNVC: 2
(241)A348870806: RNCC: 5 | RNVC: 2

22 May 2012

5340-15-218-2329
Kit Per Maniglione

152182329
SETMANIGLIONE: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-214-6248
Tirafilo

152146248
ART17: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-151-2735
Screw Threa Insert

151512735
3202335: RNCC: 3 | RNVC: 2
553202335000: RNCC: 5 | RNVC: 2

8 Jun 2000

5340-15-155-5628
Raccordo Elettro-Me

151555628
2094-A1: RNCC: 3 | RNVC: 2

11 Apr 2002

5340-15-181-0472
Staffa Per Tubazion

151810472
60163453: RNCC: 3 | RNVC: 2
(241)A424960163453: RNCC: 5 | RNVC: 2

8 Oct 2008

5340-15-178-3944
Dust And Moisture Seal Protective Cover

151783944
D5407107: RNCC: 3 | RNVC: 2

31 May 2005

5340-15-120-6855
Cuneo Di Blocco Per

151206855
D0484451: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-121-6362
Centreur

151216362
800038728: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-193-0283
Gancio

151930283
504049933: RNCC: 3 | RNVC: 2
(241)A4249504049933: RNCC: 5 | RNVC: 2

6 Apr 2010

5340-15-107-0441
Parapolvere Ad Anel

151070441
23909: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-122-2161
Pivot Selecteur

151222161
800057654: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-051-4178
Piastra

150514178
4531384: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-215-0796
Incontro Per Serrat

152150796
561183: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-207-4183
Paracolpo Gomma

152074183
550947: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-15-125-7689
Asta Portabussole

151257689
A267: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-205-3911
Roller

152053911
R1006103: RNCC: 3 | RNVC: 2

6 Mar 2012

5340-15-162-3350
Dust And Moisture Seal Protective Cap

151623350
20H-006: RNCC: 3 | RNVC: 2

27 Jun 2001

5340-15-151-0314
Premitreccia

151510314
63205: RNCC: 3 | RNVC: 2

18 Apr 2000

5340-15-155-8241
Support Bracket

151558241
4111T04G01: RNCC: 3 | RNVC: 2
4111T04G01: RNCC: 3 | RNVC: 2

11 Jul 2002

5340-15-194-3947
Adaptor

151943947
161452701: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-15-107-5351
Resilient Mount

151075351
SR 2127: RNCC: 3 | RNVC: 2

22 Mar 1988

5340-15-191-3162
Bracket

151913162
6874337: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-163-2366
Clamp

151632366
4877184: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-108-8931
Control Rod

151088931
4711519: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-113-1499
Coperchio Ispezione

151131499
265A0047-001: RNCC: 3 | RNVC: 2

7 Oct 1990

5340-15-198-5727
Control Rod

151985727
11050401: RNCC: 3 | RNVC: 2
(241)A977211050401: RNCC: 5 | RNVC: 2

15 Oct 2004

5340-15-195-1790
Crank

151951790
51001850: RNCC: 3 | RNVC: 2

7 Mar 2011

5340-15-197-5086
Antif.Acc.Ibm

151975086
PN UAS 00019050: RNCC: 3 | RNVC: 2
5340F76017764: RNCC: 5 | RNVC: 9

8 Apr 2004

5340-15-213-3058
Lucchetto Tre Cerch

152133058
264: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-127-3045
Staffetta Fissaggio

151273045
718299: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-168-9384
Padlock

151689384
F72000917: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-065-0060
Double Angle Bracket

150650060
14034-101: RNCC: 3 | RNVC: 2

17 Aug 1984

5340-15-123-5686
Clips

151235686
99A516P001: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-127-3935
Staffetta Sostegno

151273935
845512: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-144-9966
Access Door

151449966
7407B: RNCC: 3 | RNVC: 2

26 Feb 1997

5340-15-201-0419
Coperchio Di Protez

152010419
N632U6023201: RNCC: 3 | RNVC: 2
(241)A0126N632U6023201: RNCC: 5 | RNVC: 2

15 May 2006

5340-15-121-5663
Control Rod

151215663
1R 554145LA: RNCC: 3 | RNVC: 2
1R 554145LA: RNCC: 5 | RNVC: 9

13 Sep 1996

5340-15-154-4706
Special Bolt

5340-15-198-1734
Corpo Asta Sollevam

151981734
D1421052: RNCC: 3 | RNVC: 2

22 Jun 2004

5340-15-202-9134
Half Hinge

152029134
N967G7149201: RNCC: 3 | RNVC: 2
(241)A0126N967G7149201: RNCC: 5 | RNVC: 2

25 Sep 2007

5340-15-206-7848
Bumper

152067848
4222005-00: RNCC: 3 | RNVC: 2

20 Jul 2012

5340-15-068-4531
Nut And Bolt Locking Plate

150684531
808-43211-13: RNCC: 3 | RNVC: 2

5 Mar 1986

5340-15-136-0674
Lock Ring Gage

151360674
7030895: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-007-1800
Resilient Mount

150071800
1373255: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-041-2126
Tappo Di Protezione

150412126
V12922: RNCC: 3 | RNVC: 2

22 Nov 1975

5340-15-214-8673
Tappo In Plastica

152148673
MM40X40: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-110-5763
Coperchio Accesso

151105763
532193: RNCC: 2 | RNVC: 2
1S 532193: RNCC: 3 | RNVC: 2
1S 532193: RNCC: 5 | RNVC: 9
532193: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-221-7580
Fischer Mm 08 In Sc

152217580
0204-S8V: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-163-1349
Support

151631349
1326246080: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-104-4325
Testa Tira Forcella

151044325
10001071: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-152-5149
Resilient Mount

151525149
60144536: RNCC: 3 | RNVC: 2

19 Sep 2000

5340-15-114-7295
Ghiera

151147295
D0491104: RNCC: 3 | RNVC: 2

30 Jul 1992

5340-15-153-6997
Sostegno Elastico

151536997
121132112: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-175-9684
Boccola Di Fissaggi

151759684
4731258: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-231-1910
Supporto

152311910
7541164: RNCC: 3 | RNVC: 2
534015E107381: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-108-6736
Supporto Di Montagg

151086736
1455-34-013: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-009-1457
Double Angle Bracket

150091457
1398226: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-231-5688
Morsetto 025

152315688
534015E093109: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-001-7794
Nut And Bolt Retainer

150017794
8053129: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-215-3627
Cavallotti Plastica

152153627
CAVALLOTTI6MM.: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-118-1166
Helical Compression Spring Seat

151181166
D27953: RNCC: 3 | RNVC: 2
D27953: RNCC: 5 | RNVC: 9

22 Mar 1996

5340-15-006-4019
Helical Compression Spring Seat

150064019
8822963: RNCC: 3 | RNVC: 2

5 Nov 1979

5340-15-123-2010
Molla

151232010
96078552: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-123-1971
Staffetta

151231971
4068208: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-198-5812
Assieme Coperchio

151985812
138233: RNCC: 3 | RNVC: 2
(241)A0076138233: RNCC: 5 | RNVC: 2

15 Oct 2004

5340-15-213-8860
Battente Di Arresto

152138860
499IBFM: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-121-9020
Cerniera Superiore

151219020
142502917: RNCC: 3 | RNVC: 2

19 Mar 1996

5340-15-151-6639
Leva

151516639
42051432: RNCC: 3 | RNVC: 2

22 Jun 2000

5340-15-166-5172
Assieme Supporto

151665172
4528610000D: RNCC: 3 | RNVC: 2
4528610000D: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-187-3252
Double Angle Bracket

151873252
98198089: RNCC: 3 | RNVC: 2
(241)A396398198089: RNCC: 5 | RNVC: 2

16 Mar 2009

5340-15-147-8765
Manual Control Lever

151478765
49163: RNCC: 3 | RNVC: 2

18 May 1998

5340-15-201-9684
Manual Control Handle

152019684
79101994: RNCC: 3 | RNVC: 2
(241)AD75179101994: RNCC: 5 | RNVC: 2
79101994: RNCC: 5 | RNVC: 2

17 Jan 2007

5340-15-203-7079
Manual Control Handle

152037079
504314012: RNCC: 3 | RNVC: 2

27 Jun 2011

5340-15-156-3829
Plugging Plate

151563829
(241)A3460CBD71337P01: RNCC: 3 | RNVC: 2
CBD71337P01: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-112-8447
Puntalino

151128447
469542: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-218-9278
Strap

152189278
767-1935-010: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-058-0930
Resilient Mount

150580930
760250D: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-156-3585
Dust Protective Cap

151563585
(241)A3460CBD71079P01: RNCC: 3 | RNVC: 2
CBD71079P01: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-122-0442
Manual Clutch Lever

151220442
492142: RNCC: 3 | RNVC: 2

23 Apr 1996

5340-15-060-2206
Guida Per Cassetti

150602206
1971TAV99-2ACCIAI0IN0X: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-157-3704
Special Bracket

151573704
190509378: RNCC: 1 | RNVC: 3

4 Jul 2003

5340-15-005-1097
Anchor Strap

150051097
1137-04-114: RNCC: 3 | RNVC: 2

10 Apr 1978

5340-15-108-0930
Scharnier

151080930
A27604-01-08: RNCC: 3 | RNVC: 2
A27604-01-08: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-120-7655
Clamp

151207655
237CA370-1TR: RNCC: 3 | RNVC: 2

31 Jul 1995

5340-15-040-5138
Guarnizione Guaina

150405138
TN027: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-113-9932
Ralla

151139932
D0473744: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-15-001-8812
Anello

150018812
11010393: RNCC: 3 | RNVC: 2

18 Jul 2013

5340-15-212-6839
Ruote Girevoli

152126839
DIA100XBOX: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-004-2382
Resilient Mount

150042382
PGM44-70: RNCC: 3 | RNVC: 2

30 May 1977

5340-15-115-7007
Pomello

151157007
D0469663: RNCC: 3 | RNVC: 2

10 Mar 1994

5340-15-175-0443
Fixing System

151750443
14213: RNCC: 3 | RNVC: 2

29 Dec 2003

5340-15-166-5249
Kit-Stringitubo Dia

151665249
1902851: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-128-1293
Molla Di Richiamo

151281293
876174: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-102-2796
Gruppo Staffaggio

151022796
645769: RNCC: 3 | RNVC: 2
645769: RNCC: 5 | RNVC: 9

18 Feb 1988

5340-15-119-3176
Carter De Protectio

151193176
75204988: RNCC: 3 | RNVC: 2

11 Jul 1994

5340-15-152-1105
Access Door

151521105
60139264: RNCC: 3 | RNVC: 2

7 Aug 2000

5340-15-100-8103
Semicerniera

151008103
109-0640-52-122: RNCC: 3 | RNVC: 2

27 Oct 1986

5340-15-125-6178
Lucchetto Cisa

151256178
MOD. 285/84: RNCC: 3 | RNVC: 2
MOD. 285/84: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-136-8708
Tappo

151368708
8JA002252-103: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-115-7061
Coperchio

151157061
D1401131: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-067-9668
Handwheel

150679668
53.108: RNCC: 3 | RNVC: 2
53.108: RNCC: 3 | RNVC: 2

8 Jul 1986

5340-15-237-7419
Basetta Unificata

152377419
410.405.01: RNCC: 3 | RNVC: 2
534015E082741: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-113-2443
Staffacomplessivo

151132443
277A0137-401: RNCC: 3 | RNVC: 2

11 Apr 1991

5340-15-161-1940
Lucchetti Combinaz.

151611940
F720188481: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-106-3216
Staffa

151063216
872571: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-147-3257
Collier

151473257
30S10: RNCC: 3 | RNVC: 2

31 Oct 1997

Load More Results