What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 36 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 36 of 72

5340-15-127-3064
Molla Richiamo

151273064
717426: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-112-2264
Fascetta Speciale

151122264
41610025A: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-002-3467
Dust And Moisture Seal Protective Cover

150023467
551916018000: RNCC: 3 | RNVC: 2

16 Aug 2013

5340-15-102-8998
Helical Compression Spring Retainer

151028998
1P285085: RNCC: 3 | RNVC: 2
1P285085: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-114-0265
Helical Compression Spring Seat

151140265
8198717: RNCC: 3 | RNVC: 2

15 Apr 1992

5340-15-179-5053
Utility Resilient Mount

151795053
248053994: RNCC: 3 | RNVC: 2
248053994: RNCC: 5 | RNVC: 2

23 Jan 2007

5340-15-158-4100
Piastra Di Montaggi

151584100
0-180992: RNCC: 3 | RNVC: 2
1PA39630-180992: RNCC: 5 | RNVC: 2

3 Feb 2004

5340-15-064-6362
Nut And Bolt Locking Plate

150646362
01-245-E-148: RNCC: 3 | RNVC: 2

24 Jun 1984

5340-15-007-5245
Rubber Bumper

150075245
11791-101: RNCC: 3 | RNVC: 2

10 May 1980

5340-15-199-1265
Y Hinge

151991265
G1325521112-001: RNCC: 3 | RNVC: 2

17 Jan 2005

5340-15-114-7199
Helical Compression Spring Retainer

151147199
03-619-B-49: RNCC: 1 | RNVC: 3
54923: RNCC: 3 | RNVC: 2
(7001)5340151147199: RNCC: 3 | RNVC: 2

29 Jul 1992

5340-15-052-9086
Mezza Cerniera

150529086
204-4610-19-3: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-152-3626
Multiple Angle Bracket

151523626
00158088: RNCC: 3 | RNVC: 2
0-158088: RNCC: 3 | RNVC: 2
(241)A39630-158088: RNCC: 5 | RNVC: 2

4 Sep 2000

5340-15-139-4385
Tirante

151394385
4705357: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-120-6470
Piastrina Metallica

151206470
D0471355: RNCC: 3 | RNVC: 2

28 Jun 1996

5340-15-166-5209
Helical Pinion

151665209
1301722: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-231-0621
Supporto Carrucola

152310621
16537AEP: RNCC: 3 | RNVC: 2
534015E117959: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-124-1712
Tappo Di Protezione

151241712
TP500080201C28122: RNCC: 3 | RNVC: 2
TP500080201C28122: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-005-6057
Handwheel

150056057
0P022: RNCC: 3 | RNVC: 2
OP 022: RNCC: 5 | RNVC: 2
OP 022: RNCC: 5 | RNVC: 2

21 Apr 1979

5340-15-155-8271
Support Bracket

151558271
4133T04G01: RNCC: 3 | RNVC: 2
4133T04G01: RNCC: 3 | RNVC: 2

11 Jul 2002

5340-15-118-2914
Double Angle Bracket

151182914
D1410093: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-15-122-2489
Headless Straight Rod

151222489
80A068910: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-115-7069
Flangia Di Battuta

151157069
D0489280: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-117-0320
Collier Rilsan

151170320
B340-04: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-119-9799
Helical Compression Spring Seat

151199799
79951F01: RNCC: 3 | RNVC: 2
79951F01: RNCC: 5 | RNVC: 9

28 May 1996

5340-15-193-7731
Key Blank

151937731
JUNIE-JU1: RNCC: 3 | RNVC: 2

13 Jul 2010

5340-15-149-0803
Staffa Tirante Azio

151490803
20645-29-017: RNCC: 3 | RNVC: 2
20645-29-017: RNCC: 5 | RNVC: 9

23 Nov 1998

5340-15-166-5059
Slide

151665059
24304001: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-000-4385
Blocchetto

150004385
249100275P: RNCC: 3 | RNVC: 2

1 Mar 2013

5340-15-074-3673
Turnbuckle

150743673
2C22UNI2021AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-074-4296
Turnbuckle

150744296
2A64UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-138-3004
Fermaglio

151383004
12601274: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-101-7828
Fascetta Speciale

151017828
SC32674.75D: RNCC: 3 | RNVC: 2

21 Jul 1987

5340-15-002-5973
Double Angle Bracket

150025973
5801326071: RNCC: 3 | RNVC: 2

4 Sep 2013

5340-15-127-6563
Molla Registro Gana

151276563
340896: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-067-3099
Snap Hook

150673099
016A5: RNCC: 2 | RNVC: 2

1 Apr 1998

5340-15-103-0078
Helical Compression Spring Seat

151030078
4628569: RNCC: 3 | RNVC: 2

21 Jun 1987

5340-15-101-7822
Fascetta Speciale

151017822
SC32674.72D: RNCC: 3 | RNVC: 2

21 Jul 1987

5340-15-113-2913
Turnbuckle Body

151132913
1Z 591180LA: RNCC: 3 | RNVC: 2
1Z 591180LA: RNCC: 5 | RNVC: 9

7 Jan 1994

5340-15-042-2855
Fascetta Speciale

150422855
7113-06: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-180-4371
Support Assembly

151804371
212-5310-15-123: RNCC: 3 | RNVC: 2
(241)A0126212-5310-15-123: RNCC: 5 | RNVC: 2

20 May 2008

5340-15-222-2272
Scossalina In Lamie

152222272
S1-73L: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-161-2106
Plate Assy Rctu253

151612106
1215838-301: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-15-074-4349
Turnbuckle

150744349
1C10UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-074-4309
Turnbuckle

150744309
1B22UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-103-0930
Resilient Mount

151030930
TP83637: RNCC: 3 | RNVC: 2
(241)A0305TP83637: RNCC: 5 | RNVC: 2
DE040.20.011: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-237-3807
Serratura "Patent"

152373807
33880-40: RNCC: 3 | RNVC: 2
534015E089518: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-109-0972
Assieme Tappo

151090972
TC9.0340.000.20: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-105-1179
Serratura Da Addoss

151051179
4973701: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-187-2164
Supporto Sinistro

151872164
174801227: RNCC: 3 | RNVC: 2
(241)A0199174801227: RNCC: 5 | RNVC: 2

25 Feb 2009

5340-15-102-1644
Brida Di Fissaggio

151021644
513-4502: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-166-4973
Bracket Ass

151664973
009A4583401: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-156-3371
Extractor

151563371
(241)A3460CBD71233P01: RNCC: 3 | RNVC: 2
CBD71233P01: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-15-041-1346
Fascetta Per Fissag

150411346
SN96: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-008-1222
Tratto Canalina

150081222
6339220: RNCC: 3 | RNVC: 2

14 Jul 1981

5340-15-154-2876
Cerniera

151542876
1PA3488PL0011919: RNCC: 3 | RNVC: 2
PL0011919: RNCC: 5 | RNVC: 2

6 Apr 2001

5340-15-112-9290
Coperchiettopercamp

151129290
78955: RNCC: 3 | RNVC: 2
78955F01: RNCC: 3 | RNVC: 2

15 Jan 1996

5340-15-122-5571
Rule Joint

151225571
01TL21031: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-101-8572
Resilient Mount

151018572
781110: RNCC: 3 | RNVC: 2

1 Sep 1987

5340-15-232-9591
Tassello Sbs Acciai

152329591
00412: RNCC: 3 | RNVC: 2
534015E151691: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-074-4038
Turnbuckle

150744038
2A30UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-110-7996
Spinadiarresto

151107996
94126-101A00: RNCC: 3 | RNVC: 2
94126-101: RNCC: 5 | RNVC: 2

3 Aug 1990

5340-15-107-8050
Helical Compression Spring Retainer

151078050
68192-101A1: RNCC: 3 | RNVC: 2

2 Jun 1989

5340-15-074-4208
Turnbuckle

150744208
2B6UNI20190T60-2012AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-180-9373
Reinforcement Plate

151809373
109-0322-10-129: RNCC: 3 | RNVC: 2
(241)A0126109-0322-10-129: RNCC: 5 | RNVC: 2

22 Aug 2008

5340-15-139-5349
Tassello Di Gomma P

151395349
8569607: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-014-1947

5340-15-202-3658
Anello Isolante

152023658
17335180: RNCC: 3 | RNVC: 2
(241)A424917335180: RNCC: 5 | RNVC: 2

28 Feb 2007

5340-15-120-6936
Coperchio Gruppo Co

151206936
D0468241: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-109-8990
Puntalino

151098990
469666: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-000-1694
Serratura Per Quadr

150001694
04681: RNCC: 3 | RNVC: 2

4 Feb 2013

5340-15-119-5422
Piastrina Destra Sp

151195422
D0481796: RNCC: 3 | RNVC: 2

24 Mar 1995

5340-15-124-7871
Control Rod

151247871
8203028: RNCC: 3 | RNVC: 2
1PA34888203028: RNCC: 5 | RNVC: 2

8 Oct 1996

5340-15-139-3638
Tappo

151393638
41800596: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-215-5509
Moveable Peg Socket

152155509
YA425A: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-215-7178
Tie Bar

152157178
105B6302P1: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-155-4973
Stopper

151554973
CBD70791P14: RNCC: 3 | RNVC: 2

28 Mar 2002

5340-15-101-7460
Piastra Non Forata

151017460
300X400X20DIS44125: RNCC: 3 | RNVC: 2

4 Feb 1994

5340-15-166-5044
Castor Ass

151665044
M80307: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-195-9446
Bumper

151959446
PRGO0020PE: RNCC: 3 | RNVC: 2

30 May 2011

5340-15-125-8250
Maniglione Antipani

151258250
59183-10-0: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-114-6845
Staffettafissaggioa

151146845
UA29008-11C: RNCC: 3 | RNVC: 2

17 Jul 1992

5340-15-154-9343
Lpc Washi Injector

151549343
CBD71096P01: RNCC: 3 | RNVC: 2

13 Nov 2001

5340-15-006-4274
Nut And Bolt Locking Plate

150064274
1391419: RNCC: 3 | RNVC: 2
1391419: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-201-1486
Nut And Bolt Retainer

152011486
UA22009A22P: RNCC: 3 | RNVC: 2
(241)A2142UA22009A22P: RNCC: 5 | RNVC: 2

11 Jun 2006

5340-15-154-1939
Fermaglio A Cavallo

151541939
0-114278: RNCC: 3 | RNVC: 2
1PA39630-114278: RNCC: 5 | RNVC: 2
(241)A39630-114278: RNCC: 5 | RNVC: 2

28 Mar 2001

5340-15-120-6881
Supporto Per Manopo

151206881
D0471330: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-007-6956
Cover Plate Access

150076956
1141-35-905: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-002-5263
Sealing Plug Assembly

150025263
42558346: RNCC: 3 | RNVC: 2

2 Sep 2013

5340-15-121-4996
Corrosion Preventive Anode

151214996
08105277: RNCC: 3 | RNVC: 2

19 Jun 1996

5340-15-107-4352
Rigid Surface Mechanical Patch

151074352
46320505: RNCC: 3 | RNVC: 2
46320505: RNCC: 5 | RNVC: 9

19 Jun 1988

5340-15-117-9176
Maniglia Assieme Sp

151179176
263A1860-401: RNCC: 3 | RNVC: 2

31 Jan 1994

5340-15-155-4569
Clamping Handle

151554569
CBD71290P03: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-15-218-5197
Supporto Per Anelli

152185197
9645-15X30: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-141-2296
Kit Fissaggio Conte

151412296
GS/19/PT: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-110-4929
Tie Rod

151104929
79012467: RNCC: 3 | RNVC: 2
79012467: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-159-9747
Rubber Bumper

151599747
122621114: RNCC: 3 | RNVC: 2

19 Apr 2004

5340-15-120-6785
Piastra Supporto Mo

151206785
D0491812: RNCC: 3 | RNVC: 2

10 Jul 1996

5340-15-055-6564
Squadretta Anterior

150556564
545719: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-119-3166
Bride De Fixation

151193166
9435734: RNCC: 3 | RNVC: 2

11 Jul 1994

5340-15-151-2667
Shock Mount Pad

151512667
00083945: RNCC: 3 | RNVC: 2

4 May 2000

5340-15-120-6956
Flangia Di Attacco

151206956
D0466768: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-113-4777
Strisciaincollaggio

151134777
113A6021-403: RNCC: 3 | RNVC: 2

26 Mar 1991

5340-15-166-5187
Fascette In Cf.

151665187
2105589: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-195-4000
Dissuasore Volatili

151954000
161120: RNCC: 3 | RNVC: 2
(241)AD636161120: RNCC: 5 | RNVC: 2

21 Mar 2011

5340-15-002-3368
Interlocking Spring

150023368
07RAWC: RNCC: 3 | RNVC: 2
07RAWC: RNCC: 5 | RNVC: 2

12 Aug 2013

5340-15-166-4911
Elettroserratura Da

151664911
1451170: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-112-8265
Occhios

151128265
466715: RNCC: 3 | RNVC: 2
D0466715: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-116-8565
Cilindro Supporto

151168565
D1402551: RNCC: 3 | RNVC: 2

8 Apr 1994

5340-15-170-5740
Clamp

151705740
805-4020-007: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-15-118-6409
Clip

151186409
582-013: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-113-4561
Anelloportaguarnizi

151134561
1808-123: RNCC: 3 | RNVC: 2
1808-123: RNCC: 5 | RNVC: 9

25 Jun 1991

5340-15-154-1961
Staffa

151541961
0-164471: RNCC: 3 | RNVC: 2
(241)A39630-164471: RNCC: 5 | RNVC: 2
1PA39630-164471: RNCC: 5 | RNVC: 2

28 Mar 2001

5340-15-115-2850
Breec Lower Support

151152850
518042390: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-237-7205
Qua Placca Di Legno

152377205
Z3837: RNCC: 3 | RNVC: 2
534015E154134: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-116-8518
Coperchio Per Pompa

151168518
D0469489: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-15-135-9576
Staffa Superior

151359576
4445024: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-202-4557
Cesoia

152024557
01036: RNCC: 3 | RNVC: 2
(241)A553601036: RNCC: 5 | RNVC: 2

26 Mar 2007

5340-15-074-4341
Turnbuckle

150744341
2B72UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-142-8569
Dispositivo Chiusu

151428569
10PV00006-590: RNCC: 3 | RNVC: 2
10PV00006-590: RNCC: 5 | RNVC: 9

9 Jun 1997

5340-15-123-6221
Morsetto Per Fune D

151236221
2232-14: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-074-4107
Turnbuckle

150744107
1C39UNI2018A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-155-4877
Special Ring

151554877
CBD71189P02: RNCC: 3 | RNVC: 2

27 Mar 2002

5340-15-153-9518
Soffietto Protezion

151539518
142067161: RNCC: 2 | RNVC: 3

12 Mar 2001

5340-15-156-3850
Reaction Plate

151563850
(241)A3460CBD71342P01: RNCC: 3 | RNVC: 2
CBD71342P01: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-106-9564
Supporto

151069564
4509866: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-116-2776
Speciale Lente

151162776
190518157: RNCC: 3 | RNVC: 2

15 Apr 1993

5340-15-009-5837
Cover Plate Access

150095837
75094113: RNCC: 3 | RNVC: 2
9929189: RNCC: 5 | RNVC: 2
75094113: RNCC: 5 | RNVC: 9

22 Sep 1979

5340-15-074-4316
Turnbuckle

150744316
1B52UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-180-8421
Left Frontcover

151808421
RP247546: RNCC: 3 | RNVC: 2
(241)S3514RP247546: RNCC: 5 | RNVC: 2
RP247546: RNCC: 5 | RNVC: 9

28 Jul 2008

5340-15-218-4515
Fischer Con Vite

152184515
SCV6: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-045-3002
Control Rod

150453002
500-12-05-17: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-237-3795
P Cerniera "Anuba"

152373795
31200/16: RNCC: 3 | RNVC: 2
534015E088634: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-149-6158
Lock Assy

151496158
518-38-1660: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-219-8537
Staffa Scorrimento

152198537
161452542: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-074-4330
Turnbuckle

150744330
2B20UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-199-5063
Rubber Bumper

151995063
12.2010.2003: RNCC: 3 | RNVC: 2
162509192: RNCC: 5 | RNVC: 2

13 Apr 2005

5340-15-106-4420
Proiettore Molletta

151064420
9906989: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-216-0456
Sonda Passafilo Da

152160456
FI410: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-166-5026
Cap

151665026
21040042001: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-185-4789
Morsetto Parallelo

151854789
23851+WINGNUT: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-116-8600
Piastrina Antisvita

151168600
D0466945: RNCC: 3 | RNVC: 2

8 Apr 1994

5340-15-213-8409
Cilindro Da Infilar

152138409
08710-13: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-139-5652
Tappo

151395652
93191530: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-203-0321
Supporto Batteria

152030321
1270050: RNCC: 3 | RNVC: 2
(241)A50091270050: RNCC: 5 | RNVC: 2

19 Nov 2007

5340-15-061-2472
Electrical-Me Post

150612472
000200301500: RNCC: 5 | RNVC: 2
000200301500: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-115-2802
Locking Device

151152802
518052930: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-149-5154
Cinghia Ancoraggio

151495154
0042444: RNCC: 3 | RNVC: 2

31 Mar 1999

5340-15-220-8672
Fascetta Acciaio In

152208672
277913: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-113-8746
Sospensioneantiurto

151138746
1Q 520092LB: RNCC: 3 | RNVC: 2
1Q 520092LB: RNCC: 5 | RNVC: 9

19 May 1993

5340-15-074-4313
Turnbuckle

150744313
1B36UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-179-9043
Helical Compression Spring Seat

151799043
D1402419: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-120-6455
Sfera Con Molla Com

151206455
D0371249: RNCC: 3 | RNVC: 2

26 Jun 1996

5340-15-220-0476
Supporto Basso Dx I

152200476
S1-91D: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-170-3498
Plate Assembly

151703498
206-001-738-3: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-116-7764
Dust And Moisture Seal Protective Cap

151167764
8041/1C: RNCC: 3 | RNVC: 2

21 Apr 1994

5340-15-122-2752
Carter Pignon S.B.V

151222752
800051886: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-063-6382
Threaded End Tensioning Tie Rod

150636382
835.92: RNCC: 3 | RNVC: 2
9981173: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-112-8243
Occhio

151128243
466750: RNCC: 3 | RNVC: 2
D0466750: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-118-0437
Premiguarnizione

151180437
D0487576: RNCC: 3 | RNVC: 2

5 Dec 1994

5340-15-118-2911
Piastrina Antisvita

151182911
D1409736: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-15-139-5226
Tirante

151395226
8460977: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-166-4805
Fascetta

151664805
69R013P001C: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-154-3418
Tappo In Nylon

151543418
A196A500B: RNCC: 3 | RNVC: 2

4 May 2001

5340-15-112-9438
Pernosfericoperalbe

151129438
20200834A: RNCC: 3 | RNVC: 2

20 Apr 1996

5340-15-100-0937
Anode Retaining Plug

5340-15-152-5043
Bracket

151525043
NN77786P02: RNCC: 3 | RNVC: 2

18 Sep 2000

5340-15-187-3598
Access Door Locking Ring

151873598
040973: RNCC: 3 | RNVC: 2
(241)A3593040973: RNCC: 5 | RNVC: 2

18 Mar 2009

5340-15-150-4563
Manual Control Handle

151504563
BL366/14X160: RNCC: 3 | RNVC: 2

13 Dec 1999

5340-15-144-9111
Tirante A Teste Fil

151449111
104CA530-1: RNCC: 3 | RNVC: 2

10 Feb 1997

5340-15-198-9414
Corrosion Preventive Anode

151989414
624289: RNCC: 3 | RNVC: 2
(241)A2309624289: RNCC: 5 | RNVC: 2

6 Dec 2004

5340-15-166-5079
Cover

151665079
31370001: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-213-8081
Maniglione Antipani

152138081
5924310: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-152-4741
Bracket

151524741
NN77717P01: RNCC: 3 | RNVC: 2

18 Sep 2000

5340-15-105-9134
Headless Straight Rod

151059134
8539215: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-004-1295
Helical Compression Spring Seat

150041295
4376863: RNCC: 3 | RNVC: 2
4376863: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-181-0337
Tassello Da Muro

151810337
SX6F: RNCC: 3 | RNVC: 2
(241)AB882SX6F: RNCC: 5 | RNVC: 2

1 Oct 2008

5340-15-202-6999
Control Rod

152026999
C5B234: RNCC: 3 | RNVC: 2
(241)A0178C5B234: RNCC: 5 | RNVC: 2

21 Jun 2007

5340-15-107-1725
Plastic Bumper

151071725
RS412882A: RNCC: 3 | RNVC: 2

24 May 1989

5340-15-105-8197
Sostegno Elastico

151058197
76612: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-166-5008
Clamp

151665008
CE14383C3: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-212-1010
Chiavi Grezze

152121010
CHIAVE054: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-113-2416
Staffacomplessivo

151132416
265A1064-401: RNCC: 3 | RNVC: 2

11 Apr 1991

5340-15-120-9220
Cerniera

151209220
113A6022-751: RNCC: 3 | RNVC: 2

5 Sep 1995

5340-15-120-3565
Access Door

151203565
60175833: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-214-2357
Lastrina Ad Angolo

152142357
8X8: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-157-2458
Bronzina Minorata

151572458
DE160.03.427: RNCC: 3 | RNVC: 2
(241)A5015DE160.03.427: RNCC: 5 | RNVC: 2

9 Jun 2003

5340-15-060-2732
Puleggia Complessiv

150602732
4-0230L: RNCC: 3 | RNVC: 2

9 Feb 1977

5340-15-001-8024
Dust And Moisture Seal Protective Cap

150018024
504230207: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-176-6144
Disco Da Taglio 225

151766144
225X1,9X32Z: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-156-3861
Plate

151563861
(241)A3460CBD71351P05: RNCC: 3 | RNVC: 2
CBD71351P05: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-102-2801
Serie Gruppo Staffa

151022801
644629: RNCC: 3 | RNVC: 2
644629: RNCC: 5 | RNVC: 9

18 Feb 1988

5340-15-007-9604
Cover Plate Access

150079604
4311148: RNCC: 3 | RNVC: 2
4311148: RNCC: 5 | RNVC: 9

22 Sep 1979

5340-15-178-9413
Support Rallonge Le

151789413
MD003MD005AA00: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-15-074-4082
Turnbuckle

150744082
2B30UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-166-5193
Lucchetto Ottone Vi

151665193
LUCCHETT0VIR030: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-006-1825
Forcella Terminale

150061825
01TL20910: RNCC: 3 | RNVC: 2

24 Oct 1979

5340-15-121-5649
Control Rod

151215649
1Q 554801LA: RNCC: 3 | RNVC: 2
1Q 554801LA: RNCC: 5 | RNVC: 9

13 Sep 1996

5340-15-059-8102
Rotolo Nastro Fasce

150598102
616010050: RNCC: 3 | RNVC: 2

26 Jun 1976

5340-15-104-8882
Fissaggio Gaffetta

151048882
605655: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-068-1872
Braccio

150681872
476897: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-15-153-5175
Access Door

151535175
142010884: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-074-4210
Turnbuckle

150744210
2B10VWI2019ZNMANIC0TT00T: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-118-6045
Siege

151186045
73133615: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-202-2611
Piastrina Di Sicure

152022611
504116543: RNCC: 3 | RNVC: 2
(241)A4249504116543: RNCC: 5 | RNVC: 2

19 Feb 2007

5340-15-138-5115
Tirante

151385115
7537543: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-195-0038
Tassello

151950038
FX70025: RNCC: 3 | RNVC: 2
(241)AB882FX70025: RNCC: 5 | RNVC: 2

16 Feb 2011

5340-15-189-5296
Fascetta

151895296
MS21122C31: RNCC: 3 | RNVC: 2

26 Feb 2010

5340-15-212-2694
Catena In Plastica

152122694
EX5340RI4832726: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-120-6857
Occhio Per Forcella

151206857
D0484109: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-040-3994
Fascetta

150403994
7-4411-300-28385-3: RNCC: 3 | RNVC: 2
7-4411-3-00-28385-3: RNCC: 5 | RNVC: 2

27 Oct 1975

5340-15-182-7305
Inside Handly Canop

151827305
263A1005-403+006A5454-807: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-121-6535
Plaque Caoutchouc

151216535
800050176: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-212-2750
Serratura Elettr.Pe

152122750
EX5340RI4821506: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-216-8764
Collare

152168764
7713351: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-108-5410
Helical Compression Spring Seat

151085410
2402-166: RNCC: 3 | RNVC: 2

17 Oct 1989

5340-15-166-4943
Tassello Fischer In

151664943
GANCI0MEDI0: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-166-5023
Pivot

151665023
184023: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-166-4907
Separatore Per Scaf

151664907
SL25700: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-118-0466
Fermo Per Pattini

151180466
D0487628: RNCC: 3 | RNVC: 2

18 Nov 1994

5340-15-063-7333
Rubber Bumper

150637333
19.47.85.50: RNCC: 3 | RNVC: 2

30 May 1983

5340-15-113-2490
Staffacomplessivo

151132490
345A4277-401: RNCC: 3 | RNVC: 2

11 Apr 1991

5340-15-179-6757
Headless Straight Rod

151796757
0000500408462: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-175-1582
Plate

151751582
60163550: RNCC: 3 | RNVC: 2

21 Jan 2004

5340-15-198-9724
Padlock

151989724
YALE12: RNCC: 3 | RNVC: 2
(241)A4132YALE12: RNCC: 5 | RNVC: 2

14 Dec 2004

5340-15-122-2892
Anchor Strap

151222892
800072457: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-120-6795
Smorzatore In Ferro

151206795
D0491730: RNCC: 3 | RNVC: 2

8 May 1996

5340-15-074-4067
Turnbuckle

150744067
1B64UNI2018A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-201-1091
Padlock

152011091
LUCCHETTO: RNCC: 3 | RNVC: 2
(241)A1572LUCCHETTO: RNCC: 5 | RNVC: 2

29 May 2006

5340-15-166-5177
Supporto Motore

151665177
9AA6020A004001: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-147-0762
Manual Control Handle

151470762
52393: RNCC: 3 | RNVC: 2

21 Aug 1997

5340-15-064-8655
Resilient Mount

150648655
781054-W: RNCC: 3 | RNVC: 2
258-221-012: RNCC: 5 | RNVC: 2
258.221.012: RNCC: 5 | RNVC: 2

31 Mar 1984

5340-15-108-3405
Piastrina Passacavi

151083405
344A0059-007: RNCC: 3 | RNVC: 2

10 Apr 1989

5340-15-231-6647
Piastra

152316647
0-185319: RNCC: 3 | RNVC: 2
534015E154369: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-002-6337
Nut And Bolt Locking Plate

150026337
182704206: RNCC: 3 | RNVC: 2

11 Sep 2013

5340-15-179-0042
Plate

151790042
RS 413 811 A: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-139-7232
Chiavistello

151397232
A.2856800: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-104-0303
Turnbuckle

151040303
120.099/B: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-152-3451
Forcella

151523451
40102500: RNCC: 3 | RNVC: 2
40102500: RNCC: 5 | RNVC: 2
0-119843: RNCC: 5 | RNVC: 2

4 Sep 2000

5340-15-182-4086
Cerniera Perno A Sf

151824086
10X100LUNG: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-109-6280
Supporto Fisso Extr

151096280
002944: RNCC: 3 | RNVC: 2

2 Dec 1989

5340-15-108-6329
Resilient Mount

151086329
93800193: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-156-1722
Resilient Mount

151561722
4833816: RNCC: 3 | RNVC: 2

11 Dec 2002

5340-15-186-3528
Resina Chimica

151863528
RESINA: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-074-4039
Turnbuckle

150744039
2A33UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-162-1006
Elemento Rettilineo

151621006
30501: RNCC: 3 | RNVC: 2

8 Feb 2001

5340-15-118-1957
Turnbuckle

151181957
10092811: RNCC: 3 | RNVC: 2

22 Apr 1994

5340-15-211-1694
Serratura Cilindro

152111694
34501510: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-056-6002
Anello Porta Cuffia

150566002
14657: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-139-4163
Tirante

151394163
4638532: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-114-7793
Air Cleaner Support

151147793
560.8741.015: RNCC: 3 | RNVC: 2

4 Aug 1992

5340-15-166-4965
Inserto Filettato (

151664965
7210096507: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-074-4277
Turnbuckle

150744277
1A80UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-122-2344
Balancier Amortisse

151222344
8A0067678: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-074-4057
Turnbuckle

150744057
1B20UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-138-4702
Fermi Massa

151384702
5952649: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-209-6274
Spina Di Stazioname

152096274
7X90: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-003-9394
Nut And Bolt Locking Plate

150039394
182704216: RNCC: 3 | RNVC: 2
(241)A0199182704216: RNCC: 5 | RNVC: 2

4 Dec 2013

5340-15-114-3160
Molla Di Azionament

151143160
CF417415: RNCC: 3 | RNVC: 2

4 Jun 1992

5340-15-001-2943
Main Arm

150012943
21310119: RNCC: 3 | RNVC: 2
131-0002 ITEM 3: RNCC: 5 | RNVC: 2

17 Jun 2013

5340-15-113-2453
Mensolaangolarecomp

151132453
277A2246-401: RNCC: 3 | RNVC: 2

13 Apr 1991

5340-15-219-9677
Ganci N- 0 Per Quad

152199677
0: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-153-7286
Base (1) Per Sosteg

151537286
142045166: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-112-8240
Piattelloe

151128240
466555: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-179-5020
Mechanic Equipment Hardware Kit

151795020
2.049.034: RNCC: 3 | RNVC: 2

23 Jan 2007

5340-15-192-6479
Distanziatore

151926479
V19684: RNCC: 3 | RNVC: 2

26 Mar 2010

5340-15-158-6119
Control Rod

151586119
122607231: RNCC: 3 | RNVC: 2

10 Mar 2004

5340-15-108-3227
Accesso Coperchi

151083227
70310: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-020-2187
Squadretta Sghemba

150202187
01-231M65: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-001-8810
Anello Chiusura Fre

150018810
11010391: RNCC: 3 | RNVC: 2

18 Jul 2013

5340-15-003-1512
Multiple Angle Bracket

150031512
5949789184: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-001-8026
Dust And Moisture Seal Protective Cap

150018026
500438473: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-112-0502
Dispositivo Di Supp

151120502
252A1153-401: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-112-3759
Luggage Bumper

151123759
60148800: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-109-1853
Resilient Mount

151091853
1363429: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-112-1686
Morsettoc

151121686
343A7178-401: RNCC: 3 | RNVC: 2

11 Mar 1991

5340-15-067-2626
Ammortizzatore

150672626
SER15NTIPO01: RNCC: 2 | RNVC: 2

1 Apr 1998

5340-15-199-6750
Turnbuckle

151996750
98468537: RNCC: 3 | RNVC: 2
(241)A424998468537: RNCC: 5 | RNVC: 2

17 May 2005

5340-15-115-4656
Nylon Clamp

151154656
656089014: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-112-3465
Resilient Mount

151123465
93800197: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-134-4845
Ammortizzatore

151344845
1619-1983: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-177-6410
Turnbuckle

151776410
11130: RNCC: 3 | RNVC: 2

4 Jun 2004

5340-15-118-0353
Piattello Per Valvo

151180353
D0469369: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-15-152-2842
Tole

151522842
0390301851: RNCC: 3 | RNVC: 2

17 Aug 2000

5340-15-231-6421
Staffa

152316421
164355: RNCC: 3 | RNVC: 2
534015E113521: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-116-4930
Rubber Bumper

151164930
60167597: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-064-9450
Piastra

150649450
MC261-1-103/E: RNCC: 3 | RNVC: 2

28 Aug 1979

5340-15-125-4646
Anello

151254646
A828-2-13: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-074-4127
Turnbuckle

150744127
2C33UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-120-6654
Handwheel

151206654
D0469911: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-158-6487
Special Protezione

151586487
122629118: RNCC: 3 | RNVC: 2

12 Mar 2004

5340-15-198-4266
Manual Control Lever

151984266
122505900: RNCC: 3 | RNVC: 2

27 Sep 2004

5340-15-064-7650
Rubber Bumper

150647650
17.75.12.00: RNCC: 3 | RNVC: 2

27 Oct 1983

5340-15-101-7842
Fascetta Speciale

151017842
SC32674.82D: RNCC: 3 | RNVC: 2

21 Jul 1987

5340-15-231-3374
Collare Di Serraggi

152313374
4919581: RNCC: 3 | RNVC: 2
534015E155980: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-149-3196
Riparo Calore Compl

151493196
4886492: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-114-0867
Guida

151140867
713535-0001: RNCC: 3 | RNVC: 2

22 Apr 1992

5340-15-136-6343
Inserto Filettato

151366343
R1713SM10: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-117-0603
Lame Droite

151170603
73128970: RNCC: 3 | RNVC: 2
(241)AD75173128970: RNCC: 5 | RNVC: 2
73128970: RNCC: 5 | RNVC: 2

28 Jul 1993

5340-15-177-6299
Jack Mech Lock Assy

151776299
36254: RNCC: 3 | RNVC: 2

4 Jun 2004

5340-15-113-4778
Strisciaincollaggio

151134778
113A6021-404: RNCC: 3 | RNVC: 2

26 Mar 1991

5340-15-126-4859
Redance

151264859
RI360: RNCC: 3 | RNVC: 2
RI360: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-183-3393
Spessore Per Anube

151833393
SPESSORE PER ANUBE: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-123-8511
Tasselli

151238511
5989798: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-005-2468
Strap

150052468
666642: RNCC: 3 | RNVC: 2

9 Dec 2013

5340-15-128-5293
Molla

151285293
02039: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-101-7430
Piastra Forata

151017430
P1: RNCC: 3 | RNVC: 2

4 Feb 1994

5340-15-138-3087
Blocchetto Fissaggi

151383087
14203081: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-106-9583
Supporto

151069583
1366824: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-115-7198
Anchor Strap

151157198
32027: RNCC: 3 | RNVC: 2

10 Dec 1993

5340-15-238-4525
Chiusura Con Chiave

152384525
CH100: RNCC: 3 | RNVC: 2
534015E155162: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-074-4444
Turnbuckle

150744444
1C20UNI2021A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-197-7174
Assieme Mensola

151977174
129-0101-60-145: RNCC: 3 | RNVC: 2

21 Apr 2004

5340-15-170-8273
Supporto Alimentato

151708273
340-5709/01.01: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-067-3367
Anodo Protettivo

150673367
DIAM.35MM.LUN30MM.: RNCC: 2 | RNVC: 2

1 Apr 1998

5340-15-074-4398
Turnbuckle

150744398
1A27UNI2021A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-005-4974
Fairing & Probe As

150054974
MU4-05-0023/1: RNCC: 3 | RNVC: 2

9 Dec 2013

5340-15-180-7027
Utility Resilient Mount

151807027
2-2314.005: RNCC: 3 | RNVC: 2
22314005: RNCC: 5 | RNVC: 2
CV146356: RNCC: 5 | RNVC: 2

7 Jul 2008

5340-15-166-5204
Cilindro Iseo In Ot

151665204
8200283361D: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-108-6435
Tassello Elastico

151086435
93917039: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-152-4844
Piastrina Di Sicure

151524844
17796811: RNCC: 3 | RNVC: 2

19 Sep 2000

5340-15-216-5366
Grillo Zincato

152165366
GRILLOZINCATO: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-126-4486
Molla

151264486
14560-21: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-219-9207
Ghiera Conica

152199207
28FC: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-123-5013
Cerniera Fiat Uno

151235013
7635241: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-103-1879
Access Door

151031879
DE013.09.974: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-006-5732
Supporto Maniglia

150065732
000200312100: RNCC: 5 | RNVC: 2
000200312100: RNCC: 5 | RNVC: 9

25 Sep 1979

5340-15-051-9852
Resilient Mount

150519852
7723811: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-115-7060
Coperchio

151157060
D1301529: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-133-6054
Escutcheon Plate

151336054
NEFF43202: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-149-3886
Cover

151493886
1137-16-255: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-15-059-8097
Graffa Bloccaggio

150598097
616010121: RNCC: 3 | RNVC: 2

26 Jun 1976

5340-15-122-5508
Hand Pivot

151225508
01TL21265: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-114-1782
Spring

151141782
31293: RNCC: 3 | RNVC: 2

19 May 1992

5340-15-124-6684
Tassello Di Gomma

151246684
4778457: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-120-5149
Bracket

151205149
P-175502-401/402-14E001-206: RNCC: 3 | RNVC: 2
P175502-401/402-14E001-206: RNCC: 5 | RNVC: 2

28 Jun 1995

5340-15-040-3436
Forcella D Estremit

150403436
5-5715-101-26266: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-065-8274
Espansione Tasello

150658274
12831: RNCC: 3 | RNVC: 2

4 Sep 1985

5340-15-237-2026
Flangia

152372026
102656: RNCC: 3 | RNVC: 2
534015E032745: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-148-7424
Access Cover

151487424
142032346: RNCC: 3 | RNVC: 2

28 Sep 1998

5340-15-063-3667
Rubber Bumper

150633667
42045069: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-112-1377
Flangiaperc

151121377
DE013.15.221: RNCC: 3 | RNVC: 2

12 Feb 1991

5340-15-203-4543
Protection Assembly

152034543
N632U1034101: RNCC: 3 | RNVC: 2

4 Feb 2008

5340-15-102-1439
Accesso Coperchio

151021439
8259.00.19: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-154-3049
Tappo Ad Espansione

151543049
D0180019A: RNCC: 3 | RNVC: 2
D0180019A: RNCC: 5 | RNVC: 9

20 Apr 2001

5340-15-117-0627
Ressort De Capotage

151170627
79009016: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-112-4352
Support Pointer

151124352
AC120570-1/1-30: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-170-3374
Strap Assembly

151703374
206-050-242-1: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-058-3440
Key Blank

150583440
NP19E: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-186-9885
Door Lock Cylinder

151869885
21300154: RNCC: 3 | RNVC: 2

19 Jan 2009

5340-15-127-1281
Supporto

151271281
7577: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-231-8923
Tassello

152318923
45483282: RNCC: 3 | RNVC: 2
534015E106515: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-108-3344
Dust And Moisture Seal Protective Cap-Plug

151083344
219.118.01: RNCC: 3 | RNVC: 2

4 May 1989

5340-15-177-5899
Fermatubo

151775899
075054021: RNCC: 3 | RNVC: 2

13 May 2004

5340-15-055-6314
Staffetta Superiore

150556314
550856: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-154-7705
Mechanic Equipment Hardware Kit

151547705
G010130: RNCC: 3 | RNVC: 2

18 Sep 2001

5340-15-177-4249
Manual Control Lever

151774249
048835: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-063-3478
Double Angle Bracket

150633478
60111693: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-127-1022
Collare Per Bloccag

151271022
398144: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-139-3731
Staffa

151393731
42034552: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-211-8044
Serratura Elettrica

152118044
SERR5464: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-139-7555
Catenella Completa

151397555
0007584: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-151-4292
Staffa

151514292
0-162211: RNCC: 3 | RNVC: 2
(241)A39630-162211: RNCC: 5 | RNVC: 2
1PA39630-162211: RNCC: 5 | RNVC: 2

24 May 2000

5340-15-195-7365
Disco Di Bronzo

151957365
179097203: RNCC: 3 | RNVC: 2
(241)A0199179097203: RNCC: 5 | RNVC: 2

3 May 2011

5340-15-148-7326
Zinco

151487326
21232006F: RNCC: 3 | RNVC: 2

26 Oct 1998

5340-15-133-2510
Terminale A Forcell

151332510
66450-101: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-166-5212
Stop

151665212
1307541: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-127-2768
Semimorsetto Superi

151272768
711740: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-115-6931
Handwheel

151156931
D0467814: RNCC: 3 | RNVC: 2

8 Mar 1994

5340-15-106-2553
Sostegno El Piastra

151062553
4871774: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-051-4074
Semistaffa

150514074
4558162: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-112-8287
Ralla

151128287
467202: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-194-4361
Paracolpo In Strisc

151944361
BP5040: RNCC: 3 | RNVC: 2
(241)ADA53BP5040: RNCC: 5 | RNVC: 2

12 Nov 2010

5340-15-142-9049
Nut And Bolt Locking Plate

151429049
476583: RNCC: 3 | RNVC: 2

22 Oct 1996

5340-15-186-0783
Coppiglia In Ferro

151860783
COPPIGLIA2X30MM: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-119-7364
Insig Plate

151197364
01TL23311: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-156-2051
Flange

151562051
(241)A3460CBD71207P01: RNCC: 3 | RNVC: 2
CBD71207P01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-003-7497
Tirante Speciale Co

150037497
CC0305210/9-10-11: RNCC: 3 | RNVC: 2
(241)A0147CC0305210/9-10-11: RNCC: 5 | RNVC: 2

20 Nov 2013

5340-15-129-0472
Circlip

151290472
T3623N7-5: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-103-2310
Clamp

151032310
4.207.016: RNCC: 3 | RNVC: 2

19 Jul 1988

5340-15-147-6311
Assieme Ancoretta

151476311
5338-2: RNCC: 3 | RNVC: 2
5338-2: RNCC: 5 | RNVC: 9

5 Feb 1998

5340-15-235-6315
Armadio Rack Ruota

152356315
95298500: RNCC: 3 | RNVC: 2
534015E077328: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-236-5694
Basetta

152365694
BAS 40: RNCC: 3 | RNVC: 2
534015E117620: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-181-7506
Fascetta Metallica

151817506
A103122: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-001-3171
Duplex Towball Adap

150013171
75.FB2400-99: RNCC: 3 | RNVC: 2

17 Jun 2013

5340-15-074-4117
Turnbuckle

150744117
1C10UNI20180T60-2012A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-159-9733
Rubber Bumper

151599733
122603566: RNCC: 3 | RNVC: 2

19 Apr 2004

5340-15-120-0258
Leva Completa

151200258
73057547: RNCC: 3 | RNVC: 2

5 Dec 1994

5340-15-115-6103
Scrcco

151156103
D0468454: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-125-3468
Tassello

151253468
7642995: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-138-3595
Fermo

151383595
4251965: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-237-3147
Coperchio

152373147
341014: RNCC: 3 | RNVC: 2
534015E132201: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-001-6610
Molla

150016610
174033001: RNCC: 3 | RNVC: 2
174033001: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-153-2635
Threaded End Tensioning Tie Rod

151532635
122611357: RNCC: 2 | RNVC: 3

12 Dec 2000

5340-15-198-5813
Assieme Bocchettone

151985813
A137619-1: RNCC: 3 | RNVC: 2
(241)A0076A137619-1: RNCC: 5 | RNVC: 2

15 Oct 2004

5340-15-005-6972
Coperchio Speciale

150056972
0-33628: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-149-3060
Double Angle Bracket

151493060
4885545: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-155-5762
Corrosion Preventive Anode

151555762
8105277: RNCC: 3 | RNVC: 2

12 Apr 2002

5340-15-221-0680
Chiavi Grezze

152210680
CORBIN65: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-159-8929
Loop Clamp Kit

151598929
A6259: RNCC: 3 | RNVC: 2

7 Apr 2004

5340-15-150-6620
Resilient Mount

151506620
032243: RNCC: 3 | RNVC: 2

20 Dec 1999

5340-15-101-7448
Piastra Forata

151017448
P21: RNCC: 3 | RNVC: 2

4 Feb 1994

5340-15-008-2530
Clamp

150082530
101-16-04: RNCC: 3 | RNVC: 2

1 Feb 1982

5340-15-153-9526
Copiaccesso

151539526
142079239: RNCC: 2 | RNVC: 3

12 Mar 2001

5340-15-001-6838
Molla

150016838
174065011: RNCC: 3 | RNVC: 2
174065011: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-101-7845
Fascetta Speciale

151017845
SC32674.84D: RNCC: 3 | RNVC: 2

21 Jul 1987

5340-15-217-3200
8 Fasteners Diam. 4

152173200
MM430ML4: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-120-6958
C Telaio Sfogo Aria

151206958
D0466766: RNCC: 3 | RNVC: 2

4 Jul 1996

5340-15-102-0772
Cerniera A Volonta

151020772
213A7180-401: RNCC: 3 | RNVC: 2

29 Jul 1988

5340-15-153-8632
Porta (1) Molla

151538632
55117: RNCC: 3 | RNVC: 2

5 Mar 2001

5340-15-156-6062
Nut And Bolt Retainer

151566062
7F2836: RNCC: 3 | RNVC: 2

3 Mar 2003

5340-15-168-6513
Supporti Anti-Vibra

151686513
MPSE: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-158-0012
Speciale Morsetto

151580012
06100A196680: RNCC: 3 | RNVC: 2

15 Dec 2003

5340-15-163-1573
Clip

151631573
82456516: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-112-0423
Dispositivo Di Supp

151120423
275A1330-401: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-156-3616
Drain Valve Plate

151563616
(241)A3460CBD71415P01: RNCC: 3 | RNVC: 2
CBD71415P01: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-009-6397
Supporto Sagomato

150096397
6347150: RNCC: 3 | RNVC: 2

17 Oct 1980

5340-15-051-3718
Molla

150513718
9913184: RNCC: 3 | RNVC: 2
9913184: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-065-8278
Complessiv Supporto

150658278
185773A1: RNCC: 3 | RNVC: 2

4 Sep 1985

5340-15-074-4297
Turnbuckle

150744297
2A72UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-118-0476
Blocchetto In Bronz

151180476
D0488051: RNCC: 3 | RNVC: 2

18 Nov 1994

5340-15-100-5712
Specia Antivibrante

151005712
D0285690: RNCC: 3 | RNVC: 2
285690: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-063-6373
Cover Plate Access

150636373
820.32: RNCC: 3 | RNVC: 2
9926199: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-206-9929
Lucchetto A Chiave

152069929
081978: RNCC: 3 | RNVC: 2
(241)A3593081978: RNCC: 5 | RNVC: 2

6 Aug 2012

5340-15-145-2055
Handwheel

151452055
VRTP.200+I-A20: RNCC: 3 | RNVC: 2
1070808G00: RNCC: 5 | RNVC: 2

2 Jun 1997

5340-15-207-8578
Garnish Sill

152078578
2406003: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-212-0568
Maniglione Antipani

152120568
509 TN-SX: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-156-3661
Lifter Plate

151563661
(241)A3460CBD71405P16: RNCC: 3 | RNVC: 2
CBD71405P16: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-112-8476
Pastiglia

151128476
471991: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-107-8812
Control Rod

151078812
60124148: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-113-8663
Supporto

151138663
D4549002A: RNCC: 3 | RNVC: 2
D4549002A: RNCC: 5 | RNVC: 9

19 May 1993

5340-15-115-2314
Lower Pin

151152314
518022500: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-109-4832
Helical Compression Spring Seat

151094832
528248: RNCC: 2 | RNVC: 2
1P 528248: RNCC: 3 | RNVC: 2
1P 528248: RNCC: 5 | RNVC: 9
528248: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-205-5967
Dust And Moisture Seal Protective Plug

152055967
60196458: RNCC: 3 | RNVC: 2
(241)A424960196458: RNCC: 5 | RNVC: 2

21 Mar 2012

5340-15-199-4369
Asse

151994369
491965: RNCC: 3 | RNVC: 2
(241)A0866491965: RNCC: 5 | RNVC: 2

4 Apr 2005

5340-15-151-1149
Assieme Staffa Di F

151511149
381-0335/01: RNCC: 3 | RNVC: 2

21 Mar 2000

5340-15-206-0026
Engine Accessory Bracket

152060026
1Q 605291: RNCC: 3 | RNVC: 2
(241)A01061Q605291: RNCC: 5 | RNVC: 2

2 May 2012

5340-15-205-8510
Angle Bracket

152058510
5801323125: RNCC: 3 | RNVC: 2

6 Apr 2012

5340-15-206-9019
Ptfe Ferrule

152069019
L4275110: RNCC: 3 | RNVC: 2
(241)A3944L4275110: RNCC: 5 | RNVC: 2

25 Jul 2012

5340-15-151-2830
Access Door

151512830
541160160: RNCC: 3 | RNVC: 2
554116016000: RNCC: 5 | RNVC: 2

8 Jun 2000

5340-15-112-8535
Flangia

151128535
471687: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-154-1224
Piastrina Di Sicure

151541224
0-116148: RNCC: 3 | RNVC: 2
42102325: RNCC: 3 | RNVC: 2
0042102325: RNCC: 5 | RNVC: 2
(241)A39630-116148: RNCC: 5 | RNVC: 2
1PA 39630-116148: RNCC: 5 | RNVC: 2

22 Mar 2001

5340-15-119-5497
Dust And Moisture Seal Protective Cap-Plug

151195497
222K132-25: RNCC: 3 | RNVC: 2
60140535: RNCC: 5 | RNVC: 2

19 Sep 1994

5340-15-139-3482
Tirante

151393482
2482323: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-178-7521
Crochet

151787521
012610BB: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-232-9009
Gancio Per Pannello

152329009
0389: RNCC: 3 | RNVC: 2
534015E120457: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-068-1863
Nut And Bolt Locking Plate

150681863
476725: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-15-003-1446
Multiple Angle Bracket

150031446
5949791497: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-127-3647
Squadretta

151273647
869280: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-074-4357
Turnbuckle

150744357
1C36UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-155-1364
Dust And Moisture Seal Protective Cap-Plug

151551364
142068154: RNCC: 2 | RNVC: 3

18 Jan 2002

5340-15-004-0844
Filo Con Guaina

150040844
109-0506-46-1: RNCC: 3 | RNVC: 2

27 Oct 1981

5340-15-066-1563
Piastrina Arresto

150661563
P-893037-001: RNCC: 3 | RNVC: 2
P893037-001: RNCC: 5 | RNVC: 2

10 Feb 1986

5340-15-204-5853
Sostegno Elastico

152045853
VZA-D-AV-130: RNCC: 3 | RNVC: 2
(241)A4997VZA-D-AV-130: RNCC: 5 | RNVC: 2

22 Nov 2011

5340-15-008-5446
Rubber Bumper

150085446
012117 E: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-178-8275
Headless Straight Rod

151788275
607424: RNCC: 3 | RNVC: 2

15 Dec 2005

5340-15-209-5112
Stecca Per Avvolgib

152095112
281.7X200: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-120-0869
Double Angle Bracket

151200869
60165725: RNCC: 3 | RNVC: 2

19 Dec 1994

5340-15-117-7278
Blocchetto Di Fermo

151177278
142502440: RNCC: 3 | RNVC: 2

13 Jan 1994

5340-15-116-8585
Coperchietto Valvol

151168585
D0469751: RNCC: 3 | RNVC: 2

8 Apr 1994

5340-15-183-2741
Staffa

151832741
1315413080: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-166-4838
Ass.Supporto

151664838
2120607301: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-166-5258
Telaio

151665258
542150: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-166-4750
Anello

151664750
NAS5146: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-112-7663
Serratura Ad Incass

151127663
42325716: RNCC: 3 | RNVC: 2
42325716: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-166-5068
Handle

151665068
46620001: RNCC: 3 | RNVC: 2
46620001: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-065-0024
Handle

150650024
3613: RNCC: 3 | RNVC: 2
3613: RNCC: 3 | RNVC: 2

10 Jan 1985

5340-15-007-7080
Helical Compression Spring Retainer

150077080
4582242: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-000-7830
Corrosion Preventive Anode

150007830
SLM007D18X60: RNCC: 3 | RNVC: 2

11 Apr 2013

5340-15-118-2848
Supporto Ruota Supe

151182848
D0485465: RNCC: 3 | RNVC: 2

20 Apr 1995

5340-15-191-6239
Manicotto

151916239
U426001: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-179-1784
Support Assembly

151791784
RS 418 233 AE: RNCC: 3 | RNVC: 2

13 Jun 2006

5340-15-121-3957
Structual Angle

151213957
109-0640-57-101: RNCC: 3 | RNVC: 2

11 Dec 1995

5340-15-045-3817
Fascetta

150453817
792-11-13: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-111-5992
Holder

151115992
A08968-01-20: RNCC: 3 | RNVC: 2
A08968-01-20: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-115-3255
Lock

151153255
499-105-002: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-222-2288
Porta Roller Shutte

152222288
S1-13B0: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-006-8947
Control Rod

150068947
39A506-31-40-10: RNCC: 3 | RNVC: 2

2 Jan 1979

5340-15-151-5455
Dust And Moisture Seal Protective Plug

151515455
0093190785: RNCC: 3 | RNVC: 2
(241)A39630-117151: RNCC: 5 | RNVC: 2
0-117151: RNCC: 5 | RNVC: 2
1PA39630-117151: RNCC: 5 | RNVC: 2

6 Jun 2000

5340-15-222-2309
Montante Ipe 400 L

152222309
S1-134B: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-148-4348
Index Positioner

151484348
109-0110-77-1: RNCC: 3 | RNVC: 2

11 Aug 1998

5340-15-152-9828
Quick Release Plunger

151529828
190509259: RNCC: 3 | RNVC: 2

13 Nov 2000

5340-15-166-4753
Distanziale

151664753
4S640607: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-118-7463
Nut And Bolt Locking Plate

151187463
9431351: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-115-7135
Ghieranonfilettatae

151157135
D0467821: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-15-149-1186
Squadra Di Arresto

151491186
60187924: RNCC: 3 | RNVC: 2

2 Dec 1998

5340-15-121-7538
Sealing Plug Assembly

151217538
740414: RNCC: 3 | RNVC: 2

14 Feb 1996

5340-15-135-1338
Handwheel

151351338
11644: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-055-6800
Squadretta Destra

150556800
542190: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-155-7783
Resilient Mount

151557783
E1E11S25AL: RNCC: 1 | RNVC: 2
723009014300: RNCC: 1 | RNVC: 2

25 Jun 2002

5340-15-118-6050
Siege

151186050
73133623: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-178-9959
Plate

151789959
RS 406 398: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-183-4952
Lucchetti Di Sicure

151834952
COMM631020060001: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-000-5790
Limit Switches For

150005790
C0090292: RNCC: 3 | RNVC: 2

20 Mar 2013

5340-15-109-7497
Helical Compression Spring Seat

151097497
4780558: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-109-1872
Nut And Bolt Locking Plate

151091872
1368315: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-152-9031
Helical Compression Spring Seat

151529031
1Z 597622LA: RNCC: 3 | RNVC: 2

7 Nov 2000

5340-15-149-3073
Flangia Di Guida

151493073
4885829: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-054-9688
Perno Flangiato Spe

150549688
204-7514-4-1: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-198-8815
Assieme Maniglia Co

151988815
N523G5429101: RNCC: 2 | RNVC: 3
(241)A0126N523G5297101: RNCC: 5 | RNVC: 9
N523G5297101: RNCC: 5 | RNVC: 9

24 Nov 2004

Load More Results