What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 35 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 35 of 72

5340-15-109-8949
Grano

151098949
469126: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-222-2566
Left Handle

152222566
6346-2003-00: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-053-5960
Filo Riregno Vite

150535960
45-1532-11: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-157-6174
Manual Control Lever

151576174
11032182: RNCC: 3 | RNVC: 2
(241)A977211032182: RNCC: 5 | RNVC: 2

9 Oct 2003

5340-15-107-7450
Dust And Moisture Seal Protective Cap

151077450
001-51-100-030: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-110-6352
Angle

151106352
P-050577-001: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-200-5383
Guida

152005383
1188.149-01: RNCC: 3 | RNVC: 2
(241)A30931188.149-01: RNCC: 5 | RNVC: 2

29 Jan 2006

5340-15-166-5226
Bracket

151665226
73835311: RNCC: 3 | RNVC: 2
73835311: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-152-1134
Tassello Gomma

151521134
60153591: RNCC: 3 | RNVC: 2

7 Aug 2000

5340-15-120-4775
Tirante Elastico Co

151204775
1Q 545958LB: RNCC: 3 | RNVC: 2
1Q 545958LB: RNCC: 5 | RNVC: 9

5 Nov 1996

5340-15-153-5167
Access Door

151535167
142010827: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-115-7123
Flangia Tubo Misura

151157123
D1401013: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-15-189-6835
Shock Absorber

151896835
B22-BBM-1: RNCC: 3 | RNVC: 2

26 Feb 2010

5340-15-199-1943
Corrosion Preventive Anode

151991943
1P 536751: RNCC: 3 | RNVC: 2
15114/4/4: RNCC: 5 | RNVC: 2

6 Feb 2005

5340-15-074-4256
Turnbuckle

150744256
2D6UNI20190T60-2012AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-188-6781
Stand Base

151886781
157667401: RNCC: 3 | RNVC: 2
(241)A0199157667401: RNCC: 5 | RNVC: 2

21 Oct 2009

5340-15-154-7341
Leva Per Accelerato

151547341
D74691: RNCC: 3 | RNVC: 2

13 Sep 2001

5340-15-158-5794
Speciale Tacchetto

151585794
122606154: RNCC: 3 | RNVC: 2

9 Mar 2004

5340-15-121-6068
Molette

151216068
8AA067355: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-109-5874
Morsettoabloccosezi

151095874
21360016A: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-109-5882
Supportoaccessoriom

151095882
20530567A: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-001-8107
Spacing Threaded Standoff

150018107
98194404: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-127-2111
Anello

151272111
1740-50-015: RNCC: 3 | RNVC: 2
1740-50-015: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-156-4075
Complessiv Collare

151564075
142077024: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-222-2709
Ruota Piena Non Met

152222709
050030: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-103-1954
Speci Contropiastra

151031954
DE013.13.397: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-198-4584
Dust And Moisture Seal Protective Plug

151984584
1008T0651: RNCC: 3 | RNVC: 2
(241)A02261008T0651: RNCC: 5 | RNVC: 2

28 Sep 2004

5340-15-110-8592
Piattoassiemespecia

151108592
257578G1: RNCC: 3 | RNVC: 2

10 Sep 1990

5340-15-001-5954
Angle Bracket

150015954
5801353766: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-203-9651
Turnbuckle

152039651
52002025: RNCC: 3 | RNVC: 2
(241)A486752002025: RNCC: 5 | RNVC: 2

29 Jul 2011

5340-15-041-2407
Forcella Destremita

150412407
5-5715-101-26266-1: RNCC: 3 | RNVC: 2
5-5715-1-01-26266-1: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-174-7545
017 6 2Cu 0 Fr4 1

151747545
58572-03/006: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-116-6524
Threaded End Tensioning Tie Rod

151166524
375A2514-001: RNCC: 3 | RNVC: 2

9 Jun 1993

5340-15-170-9289
Vary Hardware

151709289
72102130: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-009-6388
Squadretta Sagomata

150096388
167607G1: RNCC: 3 | RNVC: 2

17 Oct 1980

5340-15-175-5979
Serragiunto

151755979
EX5340RI4219248: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-203-2104
Resilient Mount

152032104
SNT0017P: RNCC: 3 | RNVC: 2
(241)AG541SNT0017P: RNCC: 5 | RNVC: 2

29 Nov 2007

5340-15-201-9995
Flangia Chiusura

152019995
540153: RNCC: 3 | RNVC: 2
(241)A2156540153: RNCC: 5 | RNVC: 2

22 Jan 2007

5340-15-068-2319
Anchor Strap

150682319
W011307: RNCC: 3 | RNVC: 2
(7001)5340150682319: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-100-6590
Control Rod

151006590
170ICC015: RNCC: 3 | RNVC: 2

12 Jun 1987

5340-15-139-7542
Serratura Da Addoss

151397542
0007323: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-112-4266
Cover

151124266
170-0017/01A: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-118-6223
Lever

151186223
107619441: RNCC: 3 | RNVC: 2
1076-19-441: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-210-6687
Linguetta A Disco

152106687
UNI6606-2.5X3.7: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-111-5872
Plate

151115872
A12179-01-20: RNCC: 3 | RNVC: 2
A12179-01-20: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-120-5572
Reta Clamp Assembly

151205572
109-0512-22-3: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-15-105-8189
Sostegno Elastico

151058189
23248: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-105-2073
Rubber Bumper

151052073
848047: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-101-7458
Piastra Forata

151017458
P19: RNCC: 3 | RNVC: 2

4 Feb 1994

5340-15-217-6900
Cacciavite Philips

152176900
8011908231: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-115-5748
Resilient Mount

151155748
4885260: RNCC: 3 | RNVC: 2

5 Dec 1992

5340-15-101-0255
Corredo Modifica

151010255
KTCH-PMTMN041: RNCC: 3 | RNVC: 2

2 Nov 1987

5340-15-127-7643
Piastrina

151277643
9903336: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-151-9412
Staffa

151519412
0-174034: RNCC: 3 | RNVC: 2

26 Jul 2000

5340-15-151-9880
Staffa

151519880
0-164355: RNCC: 3 | RNVC: 2

31 Jul 2000

5340-15-074-4294
Turnbuckle

150744294
2A52UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-121-5767
Sadd Pipe Support

151215767
1R 541525: RNCC: 3 | RNVC: 2
1R 541525: RNCC: 5 | RNVC: 9

18 Sep 1996

5340-15-145-3001
Trimpot Special

151453001
224L-1-502: RNCC: 3 | RNVC: 2

30 Jun 1997

5340-15-177-7216
Anchor Strap

151777216
068711: RNCC: 3 | RNVC: 2

4 Jun 2004

5340-15-176-3801
Gabbietta Eurofix /

151763801
8043/15X85: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-065-8271
Controcoppa

150658271
2058/8/12: RNCC: 3 | RNVC: 2

4 Sep 1985

5340-15-115-7051
Coperchio

151157051
D0467816: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-116-8498
Busta Portaguarnizi

151168498
D1402589: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-15-065-6244
Tie Rod Tensioning

150656244
6399023CREP14: RNCC: 3 | RNVC: 2

4 Oct 1984

5340-15-111-7912
Scodellinospeciale

151117912
773392: RNCC: 3 | RNVC: 2

9 May 1988

5340-15-122-5461
Flange

151225461
01TL21382: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-003-3440
Stand Base

150033440
182724149: RNCC: 3 | RNVC: 2
(241)A0199182724149: RNCC: 5 | RNVC: 2

4 Nov 2013

5340-15-237-3167
Fermo

152373167
341438: RNCC: 3 | RNVC: 2
534015E132221: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-174-7544
Guaina Termor.

151747544
58287-01/109: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-141-8545
Forcella

151418545
G6X24: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-028-5630

5340-15-109-4368
C Modulo Protezioni

151094368
104-1455/01: RNCC: 3 | RNVC: 2

21 Apr 1989

5340-15-157-9891
Half Hinge

151579891
J94344142-001: RNCC: 3 | RNVC: 2

14 Dec 2003

5340-15-051-9351
Fork

150519351
7-5623-300-42766: RNCC: 3 | RNVC: 2

7 Oct 1981

5340-15-157-9218
Leaf Spring Assembly

151579218
0-162493: RNCC: 3 | RNVC: 2
1PA39630-162493: RNCC: 5 | RNVC: 2
(241)A39630-162493: RNCC: 5 | RNVC: 2

24 Nov 2003

5340-15-100-5666
Rubber Bumper

151005666
735022 S1: RNCC: 3 | RNVC: 2
735022 S1: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-007-3934
Tubo Piantone

150073934
1392657: RNCC: 3 | RNVC: 2
1391840: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-147-3097
Bush

151473097
300517: RNCC: 3 | RNVC: 2

31 Oct 1997

5340-15-120-6847
Flangia Attacco Can

151206847
D0485217: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-120-9285
Semicerniere

151209285
113A6012-751: RNCC: 3 | RNVC: 2

5 Sep 1995

5340-15-121-7109
Handle

151217109
47969-001: RNCC: 5 | RNVC: 2
47969-001: RNCC: 5 | RNVC: 9
47969-001: RNCC: 5 | RNVC: 9

6 Feb 1996

5340-15-204-1898
Supporto Staffa

152041898
195597592: RNCC: 3 | RNVC: 2
(241)A0199195597592: RNCC: 5 | RNVC: 2

21 Sep 2011

5340-15-149-3016
Morsetto Di Chiusur

151493016
4885295: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-106-6824
Cofano Maniglia

151066824
10111: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-213-8866
Comando Singolo Per

152138866
UN15: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-213-8688
Cerniera Fresata Ot

152138688
CERNIERA50X50: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-213-8686
Kit Per Portescorre

152138686
2211B: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-134-3662
Tampone

151343662
4323887: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-117-7308
Blocchetto Di Fermo

151177308
142513104: RNCC: 3 | RNVC: 2

13 Jan 1994

5340-15-122-3727
Asta Guida Molla Sp

151223727
D1401316: RNCC: 3 | RNVC: 2

12 Jun 2000

5340-15-200-7026
Flangia

152007026
A3260W1583: RNCC: 3 | RNVC: 2
(241)A424942532870: RNCC: 5 | RNVC: 2
42532870: RNCC: 5 | RNVC: 2

21 Feb 2006

5340-15-122-2667
Caoutchouc Culasse

151222667
800040100: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-123-6073
Ammortizzatore

151236073
99A544P001: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-112-0477
Dispositivo Di Supp

151120477
252A1329-401: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-196-6298
Padlock

151966298
PN UAS 00039780: RNCC: 3 | RNVC: 2
5340F76033950: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-152-8853
Specia Semicerniera

151528853
190509254: RNCC: 3 | RNVC: 2

7 Nov 2000

5340-15-205-1987
High Pre Cover Assy

152051987
CBD71463G01: RNCC: 3 | RNVC: 2
(241)A3460CBD71463G01: RNCC: 5 | RNVC: 2

24 Feb 2012

5340-15-137-3160
Spessore Laminato

151373160
S6121-60037-25: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-110-6403
Dust And Moisture Seal Protective Plug

151106403
22.01.03: RNCC: 3 | RNVC: 2
95999000: RNCC: 5 | RNVC: 2
0-110805: RNCC: 5 | RNVC: 2

16 Mar 1990

5340-15-237-9128
Cerniera A Frizione

152379128
E6-10-101-20: RNCC: 3 | RNVC: 2
534015E104180: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-153-7000
Testa Di Tirante Fi

151537000
121209124: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-122-5502
Tow Clamp

151225502
01TL21274: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-181-6210
Maniglia

151816210
MANIGLIA: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-162-2672
Oil Magnetic Dr

151622672
31.00.37.66: RNCC: 3 | RNVC: 2

17 May 2001

5340-15-106-9622
Supporto

151069622
4576638: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-007-3059
Resilient Mount

150073059
29965: RNCC: 3 | RNVC: 2

19 Apr 1980

5340-15-068-2327
Anchor Strap

150682327
W011555: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-193-1470
Piastrina Di Sicure

151931470
504124292: RNCC: 3 | RNVC: 2
(241)A4249504124292: RNCC: 5 | RNVC: 2

20 Apr 2010

5340-15-053-9470
Anello Ancoraggio

150539470
260-04-31-1: RNCC: 3 | RNVC: 2
260-04-31-1: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-109-8984
Portaregolazione

151098984
D0471400: RNCC: 3 | RNVC: 2
471400: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-109-0156
Resilient Mount

151090156
1368262: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-119-0053
Front And Plate

151190053
08288335: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-051-3585
Tirante Completo

150513585
4507091: RNCC: 3 | RNVC: 2
4507091: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-115-6982
Cuneo Di Bloccaggio

151156982
D1401049: RNCC: 3 | RNVC: 2

10 Mar 1994

5340-15-186-2250
Cremonese Ottone

151862250
CREMONESEOTTONE: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-118-2845
Portello Canna Care

151182845
D0485471: RNCC: 3 | RNVC: 2

20 Apr 1995

5340-15-151-5322
Maniglia

151515322
0-103510: RNCC: 3 | RNVC: 2
(241)A39630-103510: RNCC: 5 | RNVC: 2
1PA39630-103510: RNCC: 5 | RNVC: 2

6 Jun 2000

5340-15-149-5638
Shock Mount

151495638
600-4301-001: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-003-0383
Stand Base

150030383
182771025: RNCC: 3 | RNVC: 2
(241)A0199182771025: RNCC: 5 | RNVC: 2

25 Oct 2013

5340-15-166-4743
Fascetta

151664743
MS21919DG18: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-115-5414
Supporto Destro Man

151155414
D0469595: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-188-2725
Dust And Moisture Seal Protective Plug

151882725
TAFN12BLACK: RNCC: 3 | RNVC: 2
TMA34: RNCC: 3 | RNVC: 2
70-80-459: RNCC: 5 | RNVC: 2

1 Sep 2009

5340-15-127-3670
Tamponcino

151273670
1406-90-023: RNCC: 3 | RNVC: 2
1406-90-023: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-122-0430
Bracket

151220430
858256: RNCC: 3 | RNVC: 2
BOF22057: RNCC: 5 | RNVC: 2

23 Apr 1996

5340-15-213-1705
Fascetta Autoblocca

152131705
FS160AWC: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-193-5820
Bracket Assy

151935820
J57350798-403: RNCC: 3 | RNVC: 2
(241)A0019J57350798-403: RNCC: 5 | RNVC: 2

16 Jun 2010

5340-15-117-2007
Control Rod

151172007
190521122: RNCC: 3 | RNVC: 2

2 Sep 1993

5340-15-150-6619
Resilient Mount

151506619
028893: RNCC: 3 | RNVC: 2

20 Dec 1999

5340-15-211-4437
Gancio

152114437
641CP1: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-103-5740
Electrical-Me Post

151035740
RS403685A: RNCC: 3 | RNVC: 2

11 Jan 1989

5340-15-234-8546
Ghiera Conica

152348546
M14: RNCC: 3 | RNVC: 2

27 Aug 2007

5340-15-189-3879
Disk

151893879
014761: RNCC: 3 | RNVC: 2

18 Feb 2010

5340-15-074-4436
Turnbuckle

150744436
2B6UNI2021ZNMANIC0TT00T: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-233-3228
Cerniera Acciaio Zi

152333228
2CERNZN001: RNCC: 3 | RNVC: 2
534015E122402: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-218-7094
Punti Per Spillatri

152187094
PUNTIMM5: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-120-0799
Utility Resilient Mount

151200799
223807F91: RNCC: 3 | RNVC: 2

16 Dec 1994

5340-15-181-3542
Headless Straight Rod

151813542
8131646: RNCC: 3 | RNVC: 2
(241)A42498131646: RNCC: 5 | RNVC: 2

4 Dec 2008

5340-15-178-0017
Comples Dispositivo

151780017
629/D: RNCC: 3 | RNVC: 2
(241)A1829629/D: RNCC: 5 | RNVC: 2

25 Aug 2004

5340-15-193-1962
Dust And Moisture Seal Protective Cap

151931962
11073: RNCC: 3 | RNVC: 2

20 Apr 2010

5340-15-106-8350
Spina Bloccaggio

151068350
2544-4: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-202-4555
Terminale

152024555
05453: RNCC: 3 | RNVC: 2
(241)A553605453: RNCC: 5 | RNVC: 2

26 Mar 2007

5340-15-105-6361
Collare Serraggio

151056361
701533/1: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-212-7068
Blocco Di Sicurezza

152127068
BLOCCOSICUREZZA: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-063-3921
Flexible Surface Mechanical Patch

150633921
4.112.056: RNCC: 3 | RNVC: 2

7 Oct 1982

5340-15-200-2770
Doga

152002770
MT58200012: RNCC: 3 | RNVC: 2
(241)A3121MT58200012: RNCC: 5 | RNVC: 2

21 Nov 2005

5340-15-187-3756
Sportello Accesso

151873756
28.209.00: RNCC: 3 | RNVC: 2
(241)A431128.209.00: RNCC: 4 | RNVC: 1

23 Mar 2009

5340-15-117-7293
Control Rod

151177293
142507907: RNCC: 3 | RNVC: 2

13 Jan 1994

5340-15-115-7045
Coperchietto

151157045
D0470014: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-142-2377
Ammortizzatore

151422377
MM100AISI316: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-068-1834
Boccola Speciale

150681834
474164: RNCC: 3 | RNVC: 2
D0474164: RNCC: 3 | RNVC: 2

2 Feb 1996

5340-15-150-3885
Dust And Moisture Seal Protective Cap

151503885
A604/8: RNCC: 3 | RNVC: 2

2 Dec 1999

5340-15-108-8025
Helical Compression Spring Seat

151088025
1395502: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-027-5787

5340-15-139-3993
Staffa

151393993
4469226: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-074-4431
Turnbuckle

150744431
2B16UNI2021AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-105-6296
Collare Serraggio

151056296
588526: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-117-9904
Resilient Mount

151179904
AVAUD 910L: RNCC: 3 | RNVC: 2

2 Nov 1994

5340-15-154-5991
Base (1) Per Sosteg

151545991
157606664: RNCC: 2 | RNVC: 3

26 Jul 2001

5340-15-142-8563
Zinco Elettrolitic

151428563
21232003F: RNCC: 3 | RNVC: 2
21232003F: RNCC: 5 | RNVC: 9

9 Jun 1997

5340-15-199-4364
Asse

151994364
490901: RNCC: 3 | RNVC: 2
(241)A0866490901: RNCC: 5 | RNVC: 2

4 Apr 2005

5340-15-124-3831
Prolunga Lunghezza

151243831
360.018: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-189-3011
Sleeve Flanged

151893011
G3002100002-001: RNCC: 3 | RNVC: 2

11 Feb 2010

5340-15-170-8120
Bandella Stagnata

151708120
314-0750/03: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-115-8574
Front Brack

151158574
295060P1: RNCC: 3 | RNVC: 2
71-02-031-024: RNCC: 3 | RNVC: 2

1 Feb 1993

5340-15-154-1341
Tappo Di Protezione

151541341
0093163351: RNCC: 3 | RNVC: 2
93163351: RNCC: 3 | RNVC: 2
(241)A39630-116252: RNCC: 5 | RNVC: 2
0-116252: RNCC: 5 | RNVC: 2
1PA39630-116252: RNCC: 5 | RNVC: 2

22 Mar 2001

5340-15-006-0877
Anello Connessione

150060877
P-945217-001: RNCC: 3 | RNVC: 2
P945217-001: RNCC: 5 | RNVC: 2

4 Sep 1979

5340-15-166-4896
Gancio Orientabile

151664896
552082: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-110-4834
Turnbuckle

151104834
8297744: RNCC: 3 | RNVC: 2
8297744: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-136-2096
Staffa

151362096
7563342: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-219-8676
Base Di Supporto (C

152198676
198-2357: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-121-6544
Guide Chaine

151216544
800050566: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-213-8541
Maniglia Nera X Por

152138541
ART435: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-154-9214
Hook

151549214
CBD70754P02: RNCC: 3 | RNVC: 2

12 Nov 2001

5340-15-061-2104
Rim Clen Clamp (1)

150612104
L304BE: RNCC: 5 | RNVC: 2
1200096-1131D0000: RNCC: 5 | RNVC: 2
L304BE: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-063-7633
Hinge

150637633
F333A5-55: RNCC: 3 | RNVC: 2
F333A5-55: RNCC: 5 | RNVC: 2

30 May 1983

5340-15-180-4267
Nonmetallic Channel

151804267
205-1600-10-269: RNCC: 3 | RNVC: 2
(241)A0126205-1600-10-269: RNCC: 5 | RNVC: 2

20 May 2008

5340-15-178-5737
Handle

151785737
EM137: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-005-6129
Tirante Speciale

150056129
0-10323: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-181-0720
Protection Net

151810720
N925G1581201: RNCC: 3 | RNVC: 2

15 Oct 2008

5340-15-112-8290
Supportol

151128290
467231: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-129-8615
Control Rod

151298615
848336: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-155-3170
Resilient Mount

151553170
60188989: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-15-231-9462
Serratura Dx E Sx

152319462
60206577: RNCC: 3 | RNVC: 2
534015E144365: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-060-1414

5340-15-118-0377
Piastra Forata In

151180377
D0484514: RNCC: 3 | RNVC: 2

18 Nov 1994

5340-15-127-5399
Anello Isolante Pas

151275399
880649: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-058-8719
Control Rod

150588719
7-50053-000-76152A1: RNCC: 3 | RNVC: 2

5 Jun 1975

5340-15-137-3156
Complessivo Asta

151373156
NAS356-81-941: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-206-8486
Sliding Door Track Bracket

152068486
9817 6969: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-001-7100
Nut And Bolt Retainer

150017100
8043337: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-189-2777
Dust And Moisture Seal Protective Cover

151892777
D5422672: RNCC: 3 | RNVC: 2

10 Feb 2010

5340-15-147-3665
Pannello Di Chiusur

151473665
999-0500-85-23: RNCC: 3 | RNVC: 2

31 Oct 1997

5340-15-200-9239
Supporto Antivibran

152009239
TCPD 110-14: RNCC: 3 | RNVC: 2
(241)A2437TCPD 110-14: RNCC: 5 | RNVC: 2

5 Apr 2006

5340-15-134-4058
Serratura

151344058
66360-001A1: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-122-1392
Strip Retai

151221392
A39189-001: RNCC: 3 | RNVC: 2
A-39189-001: RNCC: 3 | RNVC: 2

21 May 1996

5340-15-180-7229
Reinforcement Plate

151807229
212-1125-22-103: RNCC: 3 | RNVC: 2
(241)A0126212-1125-22-103: RNCC: 5 | RNVC: 2

9 Jul 2008

5340-15-149-8239
Handwheel

151498239
VRC.192/85-7X7: RNCC: 3 | RNVC: 2

2 Jun 1999

5340-15-074-4264
Turnbuckle

150744264
1A20UNI2020ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-197-7095
Protezione

151977095
515010: RNCC: 3 | RNVC: 2

20 Apr 2004

5340-15-166-4768
Mezza Cerniera Este

151664768
66447115A1: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-112-8133
Puntalino

151128133
D0468420: RNCC: 3 | RNVC: 2
468420: RNCC: 3 | RNVC: 2

4 Feb 1993

5340-15-118-6120
Bras

151186120
73129357: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-186-7666
Utility Resilient Mount

151867666
9467780: RNCC: 3 | RNVC: 2

5 Jan 2009

5340-15-122-2586
Anchor Strap

151222586
800031695: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-121-6334
Plaquette Optique

151216334
800036245: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-127-1007
Molla

151271007
397803: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-155-1664
Dust And Moisture Seal Protective Plug

151551664
67328-01/049: RNCC: 2 | RNVC: 3

23 Jan 2002

5340-15-218-6718
Triangolo Ottonato

152186718
XLEGNO: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-041-8935
Fascetta

150418935
858394: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-187-3537
Protection Cap

151873537
552301245000: RNCC: 3 | RNVC: 2
(241)A1140552301245000: RNCC: 5 | RNVC: 2

18 Mar 2009

5340-15-209-0771
Snap Hook

152090771
WA325: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-105-8137
Turnbuckle Body

151058137
10092611: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-105-6028
Staffa A Gomito

151056028
24057: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-162-3119
Clamp

151623119
D1416044: RNCC: 3 | RNVC: 2

27 Jun 2001

5340-15-120-8202
Staffa Fissaggio Re

151208202
113708: RNCC: 3 | RNVC: 2

4 Jul 1996

5340-15-166-5114
Angolare

151665114
66121117: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-117-4909

5340-15-204-1813
Screw Thread Insert

152041813
210009133: RNCC: 3 | RNVC: 2
(241)A0199210009133: RNCC: 5 | RNVC: 2

21 Sep 2011

5340-15-207-4289
Dust And Moisture Seal Protective Cap-Plug

152074289
301025: RNCC: 3 | RNVC: 2
FPR0715: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-15-074-4066
Turnbuckle

150744066
1B56UNI2018A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-074-4192
Turnbuckle

150744192
1B20UNI2019A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-006-9362
Fascetta

150069362
35-2206-68: RNCC: 3 | RNVC: 2
35-2206-68: RNCC: 5 | RNVC: 9

11 Jan 1977

5340-15-101-3001
Hinge Half

151013001
P-135202-001: RNCC: 3 | RNVC: 2
P135202-001: RNCC: 5 | RNVC: 2

30 Jan 1988

5340-15-114-0355
Adattoreperattrezzo

151140355
369D22000-1503-B-99907: RNCC: 3 | RNVC: 2

15 Apr 1992

5340-15-142-5390
Flangia

151425390
206572: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-183-2739
Staffa

151832739
1315409080: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-156-3909
Supporting Ring

151563909
CBD71355P03: RNCC: 3 | RNVC: 2
(241)A3460CBD71355P03: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-142-4245
Fascetta

151424245
M16596: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-122-2449
Rayon Avant

151222449
80A051961: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-104-8896
Fissaggio Gaffetta

151048896
22092: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-051-4281
Scontrino Serratura

150514281
4526284: RNCC: 3 | RNVC: 2
4526284: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-189-8167
Fascetta 6Mm

151898167
1903398: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-183-4961
Serrature Diverse

151834961
COMM631018020010: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-149-1523
Gancio Speciale

151491523
2302-0054-001: RNCC: 3 | RNVC: 2

7 Dec 1998

5340-15-152-2941
Wedge

151522941
302-4684-00: RNCC: 3 | RNVC: 2

17 Aug 2000

5340-15-151-9989
Tassello Gomma

151519989
60117948: RNCC: 3 | RNVC: 2

31 Jul 2000

5340-15-181-7502
Fascetta Metallica

151817502
A103100: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-126-4676
Molla

151264676
XS1662: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-201-4242
Padlock

152014242
8077: RNCC: 3 | RNVC: 2
(241)AD9258077: RNCC: 5 | RNVC: 2

3 Sep 2006

5340-15-006-5935
Helical Compression Spring Seat

150065935
8822385: RNCC: 3 | RNVC: 2
8822385: RNCC: 5 | RNVC: 2

5 Nov 1979

5340-15-112-0418
Piastrina Speciale

151120418
275A2409-411: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-181-7504
Fascetta Metallica

151817504
A103105: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-158-5593
Rubber Bumper

151585593
122607461: RNCC: 3 | RNVC: 2

9 Mar 2004

5340-15-001-6607
Molla

150016607
174032020: RNCC: 3 | RNVC: 2
174032020: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-110-2884
Bracket Fue

151102884
P120082-001: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-154-2028
Tirante

151542028
0-168322: RNCC: 3 | RNVC: 2
(241)A39630-168322: RNCC: 5 | RNVC: 2
1PA39630-168322: RNCC: 5 | RNVC: 2

28 Mar 2001

5340-15-111-6005
Holder

151116005
A05142-01-20: RNCC: 3 | RNVC: 2
A05142-01-20: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-179-3001
Body

151793001
02201029: RNCC: 3 | RNVC: 2

16 Oct 2006

5340-15-179-1185
Fork

151791185
023584: RNCC: 3 | RNVC: 2

13 Jun 2006

5340-15-065-7520
Handle

150657520
129390: RNCC: 3 | RNVC: 2

27 Oct 1985

5340-15-155-4456
Support Plate

151554456
CBD70717P12: RNCC: 3 | RNVC: 2

25 Mar 2002

5340-15-118-0371
Bussola In Acciaio

151180371
D0473145: RNCC: 3 | RNVC: 2

1 Dec 1994

5340-15-068-1958
Gruppo Staffaggio

150681958
644644: RNCC: 3 | RNVC: 2
644644: RNCC: 5 | RNVC: 9

27 Feb 1986

5340-15-136-1990
Fermaglio

151361990
4292720: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-217-7183
Cilindro Decentrato

152177183
VIRO 60: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-136-9421
Morsetto

151369421
45C26D14-18: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-120-7085
Manual Control Handle

151207085
555-39-3270: RNCC: 3 | RNVC: 2
555539327000: RNCC: 3 | RNVC: 2

31 Jul 1995

5340-15-074-4009
Turnbuckle

150744009
1A8UNI2018A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-170-3232
Nut And Bolt Locking Plate

151703232
D0478854: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-020-3129
Chiavistello Stangh

150203129
02-231E03S05: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-121-5746
Engine Accessory Bracket

151215746
1Q 555223LA: RNCC: 3 | RNVC: 2
1Q 555223LA: RNCC: 5 | RNVC: 9

18 Sep 1996

5340-15-230-1782
Reservoir Bracket

152301782
678400: RNCC: 3 | RNVC: 2
534015E149986: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-115-2758
Lower Guide

151152758
518052070: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-118-7218
Helical Compression Spring Seat

151187218
79038442: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-105-6378
Collare Serraggio

151056378
4421110: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-166-5244
Cap

151665244
NAS8143B: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-205-2540
Dust And Moisture Seal Protective Cover

152052540
504380471: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-139-4123
Tassello

151394123
4628369: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-139-2699
Lucchetto Mm.87

151392699
AL 106: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-139-3499
Collare Fissaggio

151393499
2565043: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-149-2974
Dust And Moisture Seal Protective Cap-Plug

151492974
4882705: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-213-8157
Elettroserratura Zi

152138157
11761-70-1-2: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-215-9845
Chiave Grezza Per S

152159845
CHIAVE/NOREF: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-115-6859
Piston Connecting Rod

151156859
D1401488: RNCC: 3 | RNVC: 2

7 Mar 1994

5340-15-195-3271
Corrosion Preventive Anode

151953271
997E42509DIS: RNCC: 3 | RNVC: 2
(241)A3121997E42509DIS: RNCC: 5 | RNVC: 2

15 Mar 2011

5340-15-196-8969
Nut And Bolt Retainer

151968969
PN UAS 00026049: RNCC: 3 | RNVC: 2
5310F76012977: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-055-1096
Morsetto Serracavo

150551096
50503-03: RNCC: 3 | RNVC: 2

5 May 1972

5340-15-040-2675
Asta A Forcella

150402675
2-6847-100-27049: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-078-0846
Morsetto

150780846
TM120-51-86: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-138-5556
Tassello

151385556
7661825: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-107-5714
Staffa Completa

151075714
DE013.13.369: RNCC: 3 | RNVC: 2

5 Jan 1989

5340-15-105-6329
Collare Serraggio

151056329
14550: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-147-3350
Federklammer

151473350
2297R5920: RNCC: 3 | RNVC: 2

31 Oct 1997

5340-15-137-1292
Inserto

151371292
69260P03: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-203-0317
Fissaggio Batteria

152030317
1130055: RNCC: 3 | RNVC: 2
(241)A50091130055: RNCC: 5 | RNVC: 2

19 Nov 2007

5340-15-105-2071
Rubber Bumper

151052071
591420: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-175-0431
Fixing System

151750431
15252002: RNCC: 3 | RNVC: 2

29 Dec 2003

5340-15-103-1903
Riscontro Per Manop

151031903
DE013.12.784: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-115-8582
Tapped Stri

151158582
295066P1: RNCC: 3 | RNVC: 2
71-02-031-033: RNCC: 3 | RNVC: 2

1 Feb 1993

5340-15-058-4686
Chiusura

150584686
NR0450: RNCC: 3 | RNVC: 2

21 Jul 1976

5340-15-119-9044
Turnbuckle

151199044
142004216: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-136-1810
Complesso Boccaport

151361810
XB1: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-122-0443
Clutch Releas Lever

151220443
492160: RNCC: 3 | RNVC: 2

23 Apr 1996

5340-15-009-1969
Helical Compression Spring Seat

150091969
768213: RNCC: 3 | RNVC: 2
768213: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-149-6160
Plate

151496160
518-38-1680: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-006-2363
Tirante Arresto

150062363
0-33981: RNCC: 3 | RNVC: 2
1PA39630-33981: RNCC: 5 | RNVC: 2

10 Apr 1979

5340-15-117-2219
Helical Compression Spring Seat

151172219
08-10-1101-22CP: RNCC: 3 | RNVC: 2

30 May 1994

5340-15-109-1859
Double Angle Bracket

151091859
1396228: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-207-8695
Angle Bracket

152078695
504372691: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-193-6833
Manual Control Handle

151936833
69965: RNCC: 3 | RNVC: 2
163104355: RNCC: 3 | RNVC: 2
163104355-01: RNCC: 5 | RNVC: 2
(241)A0199163104355: RNCC: 5 | RNVC: 2
(241)A077469965: RNCC: 5 | RNVC: 2

28 Jun 2010

5340-15-151-7078
Staffa

151517078
0-154859: RNCC: 3 | RNVC: 2
(241)A39630-154859: RNCC: 5 | RNVC: 2
1PA39630-154859: RNCC: 5 | RNVC: 2

3 Jul 2000

5340-15-138-4590
Appiglio

151384590
5934281: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-109-8680
Control Rod

151098680
4802546: RNCC: 3 | RNVC: 2

15 Oct 1988

5340-15-211-8777
Pannello Con Panno

152118777
NB2002E: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-137-3821
Boccola

151373821
XC2272: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-153-7365
Piastrina Bloccaggi

151537365
142057305: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-068-1960
Gruppo Staffaggio

150681960
644646: RNCC: 3 | RNVC: 2
644646: RNCC: 5 | RNVC: 9

27 Feb 1986

5340-15-139-3257
Tassello

151393257
1394282: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-220-0469
Piatto 100 Sp6 L107

152200469
S1-9C: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-170-7276
Air In Assy

151707276
839-3010-T006: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-232-6959
Tappo Di Chiusura

152326959
540120000: RNCC: 3 | RNVC: 2
534015E135210: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-126-5923
Nottolino

151265923
P536228: RNCC: 3 | RNVC: 2
P536228: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-231-1120
Elettroserratura

152311120
11761/60: RNCC: 3 | RNVC: 2
534015E078584: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-198-6611
Corrosion Preventive Anode

151986611
DN125-DE133: RNCC: 3 | RNVC: 2

25 Oct 2004

5340-15-236-3244
Supporto Ritto

152363244
SNH516-613: RNCC: 3 | RNVC: 2
534015E006511: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-170-3330
Strap Assembly

151703330
205-070-753-1: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-158-6440
Chiavistello

151586440
162530137: RNCC: 3 | RNVC: 2

12 Mar 2004

5340-15-233-3213
Supporto Antivibran

152333213
2SUPPAV001: RNCC: 3 | RNVC: 2
534015E122387: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-108-3643
Turnbuckle

151083643
10090811: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-179-6081
Key Blank

151796081
UL054: RNCC: 3 | RNVC: 2

11 Apr 2007

5340-15-214-1836
Cantonale Piatto

152141836
CANTONALE: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-154-1765
Albero

151541765
130332: RNCC: 3 | RNVC: 2

27 Mar 2001

5340-15-114-7584
Fork

151147584
01TL20450: RNCC: 3 | RNVC: 2

4 Aug 1992

5340-15-003-1407
Dust And Moisture Seal Protective Cap-Plug

150031407
98428940: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-144-9798
Runner

151449798
10100026: RNCC: 3 | RNVC: 2

26 Feb 1997

5340-15-107-6610
Corpi Accesso

151076610
RSK-823: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-103-8529
Tassello Elastico

151038529
8585819: RNCC: 3 | RNVC: 2
(241)AF9088585819: RNCC: 5 | RNVC: 2
8585819: RNCC: 5 | RNVC: 2

25 Sep 1998

5340-15-127-7515
Ghiera Ritegno Cusc

151277515
600441012: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-127-5624
Anello Arresto Guid

151275624
896664: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-119-4170
Rubber Bumper

151194170
781093: RNCC: 3 | RNVC: 2
142513102: RNCC: 5 | RNVC: 2

26 Jul 1994

5340-15-199-0484
Speciale Staffa

151990484
161313107: RNCC: 3 | RNVC: 2
(241)A0199161313107: RNCC: 5 | RNVC: 2

9 Jan 2005

5340-15-193-0748
Hatc Hinge Assembly

151930748
N523G5169102: RNCC: 3 | RNVC: 2
(241)A0126N523G5169102: RNCC: 5 | RNVC: 2
10340136: RNCC: 6 | RNVC: 9

12 Apr 2010

5340-15-153-5014
Hal Hinge

151535014
J57140700-002: RNCC: 3 | RNVC: 2

5 Feb 2001

5340-15-119-7466
Hinge Half

151197466
P-082780-003: RNCC: 3 | RNVC: 2
P082780-003: RNCC: 5 | RNVC: 2

17 Nov 1994

5340-15-121-6562
Protection

151216562
800051467: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-127-2536
Molla

151272536
995278: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-232-9585
Tassello Con Gancio

152329585
534015E096675: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-166-5167
Plate Insulation

151665167
70810610: RNCC: 3 | RNVC: 2
70810610: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-103-7381
Piattello

151037381
1026-02-187: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-149-6170
Flange

151496170
518-38-1940: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-153-5026
Half Hinge

151535026
J57140702-002: RNCC: 3 | RNVC: 2

5 Feb 2001

5340-15-207-2644
Multiple Angle Bracket

152072644
3134-FE1401A: RNCC: 3 | RNVC: 2
3134-FE1401A: RNCC: 5 | RNVC: 2

27 Sep 2012

5340-15-115-4615

5340-15-152-2013
Nastro Di Gomma

151522013
41830216: RNCC: 3 | RNVC: 2

9 Aug 2000

5340-15-106-0065
Piastra Bloccaggio

151060065
2054957: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-180-8343
Lh Bracket Assembly

151808343
N714G1039101: RNCC: 3 | RNVC: 2
(241)A0126N714G1039101: RNCC: 5 | RNVC: 2

28 Jul 2008

5340-15-134-3935
Arresto Per Carrzze

151343935
4072: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-137-7572
Tenditore Completo

151377572
32801430: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-220-0532
Trave Collegamento

152200532
S1-137B: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-122-1425
Strip Retai

151221425
A39555-001: RNCC: 3 | RNVC: 2
A-39555-001: RNCC: 3 | RNVC: 2

21 May 1996

5340-15-136-1455
Forcella

151361455
7-66107-101-73182A1: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-110-3817
Haltebuegel

151103817
F294B2-71: RNCC: 3 | RNVC: 2
F294B2-71: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-114-3565
Electrical-Me Post

151143565
5216-208-09: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-15-198-1870
Labirinto

151981870
0400165: RNCC: 3 | RNVC: 2

24 Jun 2004

5340-15-127-4283
Molla

151274283
355497: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-207-6297
Peek Ring

152076297
WMP029100148: RNCC: 3 | RNVC: 2
(241)A2309WMP029100148: RNCC: 5 | RNVC: 2

5 Nov 2012

5340-15-209-3151
Lucchetto Monobl.Ot

152093151
LUCCHETTOMONOBLOTT95MM: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-112-8386
Fodera

151128386
466845: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-108-8936
Control Rod

151088936
60121437: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-102-8038
Testa Di Tirante Fi

151028038
263A1545-401: RNCC: 3 | RNVC: 2

27 Oct 1988

5340-15-155-1177
Resilient Mount

151551177
142037219: RNCC: 3 | RNVC: 2

18 Jan 2002

5340-15-112-8302
Coperchio

151128302
467110: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-198-4303
Access Door

151984303
122510014: RNCC: 3 | RNVC: 2

27 Sep 2004

5340-15-064-7631
Rubber Bumper

150647631
14.10.71.00: RNCC: 3 | RNVC: 2

27 Oct 1983

5340-15-206-9955
Tappo Esterno

152069955
111449: RNCC: 3 | RNVC: 2
(241)A3593111449: RNCC: 5 | RNVC: 2

6 Aug 2012

5340-15-115-0082
Astamisuratorediliv

151150082
1814-1048: RNCC: 3 | RNVC: 2
(241)A15081814-1048: RNCC: 5 | RNVC: 2
1814-1048: RNCC: 5 | RNVC: 9

23 Oct 1992

5340-15-166-5251
Kit-Stringitubo Dia

151665251
1902846: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-185-6081
Rullo Guida In Nylo

151856081
460IBFM: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-116-8566
Cilindro Coperchio

151168566
DD1402550: RNCC: 3 | RNVC: 2

8 Apr 1994

5340-15-160-1101
Padlock

151601101
F720009171: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-150-8554
Shock Mount Pad

151508554
00011280: RNCC: 3 | RNVC: 2

1 Feb 2000

5340-15-179-0977
Dust And Moisture Seal Protective Cap

151790977
308190-004: RNCC: 3 | RNVC: 2

13 Jun 2006

5340-15-071-4108
Handwheel

150714108
914: RNCC: 3 | RNVC: 2

1 May 1981

5340-15-115-7166
Torella Rigida Spec

151157166
D0468506: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-15-203-4504
Hatc Hinge Assembly

152034504
N523G5394101: RNCC: 3 | RNVC: 2
(241)A0126N523G5394101: RNCC: 5 | RNVC: 2

3 Feb 2008

5340-15-203-1774
Hand Grip

152031774
22421: RNCC: 3 | RNVC: 2

28 Nov 2007

5340-15-220-5444
Tassello Acc. Mm.10

152205444
TASSELLOACCMM10: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-115-2854
Pin

151152854
518042720: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-116-8527
Distribut Cerniera

151168527
D0469847: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-15-065-4874
Folding Stay

150654874
1040-01-012: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-102-8375
Piastrina Perno

151028375
K940-12-28-04: RNCC: 3 | RNVC: 2

27 Oct 1988

5340-15-218-9279
Strap

152189279
767-1935-008: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-147-3492
Locking Plate

151473492
291C01217-101: RNCC: 3 | RNVC: 2

31 Oct 1997

5340-15-178-2821
Dust And Moisture Seal Protective Cap

151782821
380-3029/01.01: RNCC: 3 | RNVC: 2
380-3029/01.01: RNCC: 5 | RNVC: 2

29 Apr 2005

5340-15-202-4558
Lama Per Cesoia

152024558
01038: RNCC: 3 | RNVC: 2
(241)A5536: RNCC: 5 | RNVC: 2

26 Mar 2007

5340-15-106-9853
Serratura Rimando

151069853
24021: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-163-3961
Ergot

151633961
9841722: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-108-2095
Metal Runner

151082095
484914: RNCC: 3 | RNVC: 2
D0484914: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-155-5199
Access Door

151555199
(241)A5015DE004.03.140: RNCC: 3 | RNVC: 2
DE004.03.140: RNCC: 3 | RNVC: 2

8 Apr 2002

5340-15-103-1872
Scudo Uscita Aria

151031872
DE013.09.790: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-204-4930
Spring Buckle

152044930
42563576: RNCC: 3 | RNVC: 2
7118852: RNCC: 5 | RNVC: 2
CV179208A: RNCC: 5 | RNVC: 2

7 Nov 2011

5340-15-122-5544
Fork

151225544
01TL21200-01: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-213-8820
Serratura Da Infila

152138820
72110-50-00: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-213-6019
Scrocchetto Bronzat

152136019
SCROCCHETTO: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-040-2206
Vite Ad Occhio

150402206
2-2407-200-26087: RNCC: 3 | RNVC: 2
2-2407-2-00-26087: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-231-1111
Serratura A Quadrim

152311111
57050-50: RNCC: 3 | RNVC: 2
534015E066565: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-166-5018
Rh Hinge Half

151665018
113A6012752: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-154-1791
Albero

151541791
130765: RNCC: 3 | RNVC: 2

27 Mar 2001

5340-15-074-4064
Turnbuckle

150744064
1B45UNI2018A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-103-0992
Electrical-Me Post

151030992
DE013.12.962: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-148-6203
Nonmetallic Bumper

151486203
V36266.00: RNCC: 3 | RNVC: 2

15 Sep 1998

5340-15-005-2191
Threaded End Tensioning Tie Rod

150052191
554132240000: RNCC: 2 | RNVC: 3
541-32-2400: RNCC: 3 | RNVC: 2

16 Sep 1980

5340-15-112-8458
Headless Grooved Rod

151128458
467388: RNCC: 3 | RNVC: 2
D0467388: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-157-6206
Metallic Solid Wheel

151576206
1001150150: RNCC: 3 | RNVC: 2
(241)A97721001150150: RNCC: 5 | RNVC: 2

9 Oct 2003

5340-15-062-6555
Resilient Mount

150626555
23727: RNCC: 3 | RNVC: 2

25 Nov 1981

5340-15-102-9063
Accesso Coperchio

151029063
1P267794: RNCC: 3 | RNVC: 2
1P267794: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-144-6431
Control Rod

151446431
1307218: RNCC: 3 | RNVC: 2
10428: RNCC: 3 | RNVC: 2

11 Dec 1996

5340-15-213-8527
Coppia Di Contatto

152138527
050060: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-137-0980
Fascetta

151370980
71909: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-124-8279
Ganci Fissi Piegati

151248279
558001: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-117-0486
Ring And Spheric

151170486
390653: RNCC: 3 | RNVC: 2
D0390653: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-163-1463
Support

151631463
98493901: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-074-4302
Turnbuckle

150744302
2A10UNI20200T60-2012AQ673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-123-0688
Molla

151230688
5443516: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-101-7827
Fascetta Speciale

151017827
SC32674.74S: RNCC: 3 | RNVC: 2

21 Jul 1987

5340-15-194-8724
Guard

151948724
3220833: RNCC: 3 | RNVC: 2
450/24432: RNCC: 5 | RNVC: 2

27 Jan 2011

5340-15-109-3542
Alberospeciale

151093542
OP-08.32: RNCC: 3 | RNVC: 2

16 Oct 1989

5340-15-056-7063
Threaded End Tensioning Tie Rod

150567063
1127-11-473: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-121-5097
Piastrina Di Fermo

151215097
109-0103-30-13: RNCC: 3 | RNVC: 2

8 Jan 1996

5340-15-107-1149
Nut And Bolt Locking Plate

151071149
301-01-9770: RNCC: 3 | RNVC: 2

14 Apr 1987

5340-15-006-9623
Clamp

150069623
4860-1: RNCC: 3 | RNVC: 2

11 Jan 1979

5340-15-215-1474
Ruote Diam.80

152151474
EX5340RI5201249: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-157-9576
Folding Stay

151579576
323110250: RNCC: 3 | RNVC: 2
(241)A0094323110250: RNCC: 5 | RNVC: 2

3 Dec 2003

5340-15-118-0506
Coperchio Distribut

151180506
D0488976: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-118-2824
Boccola Portaguarni

151182824
D0485532: RNCC: 3 | RNVC: 2

20 Apr 1995

5340-15-123-8307
Cerniera Inferiore

151238307
5989266: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-156-7322
Hand Grip

151567322
(241)A3460CBD70802P03: RNCC: 3 | RNVC: 2
CBD70802P03: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-15-112-0552
Dispositivo Di Supp

151120552
231A3071-401: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-174-7571
Brunitura P.C.S. Ma

151747571
59999-43/003: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-102-3488
Helical Compression Spring Seat

151023488
25091-18: RNCC: 3 | RNVC: 2
25091-18: RNCC: 5 | RNVC: 9

12 Oct 1987

5340-15-112-8464
Astucciop

151128464
467663: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-065-3202
Piastrina Di Arrest

150653202
P-893053-001: RNCC: 3 | RNVC: 2
P893053-001: RNCC: 5 | RNVC: 2

19 Feb 1985

5340-15-232-9595
Tassello In Acciaio

152329595
00414: RNCC: 3 | RNVC: 2
534015E150797: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-119-7363
Guard Assy

151197363
01TL23313: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-178-8144
Spacing Threaded Standoff

151788144
504062791: RNCC: 3 | RNVC: 2
A083016-007: RNCC: 5 | RNVC: 2

15 Dec 2005

5340-15-122-1305
Plate

151221305
A-39233-001: RNCC: 3 | RNVC: 2
A39233-001: RNCC: 3 | RNVC: 2

21 May 1996

5340-15-118-6456
Plomb

151186456
75204165: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-118-0358
Coperchietto Flangi

151180358
D0469374: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-15-061-4701
Supporto Angolare S

150614701
P135239-001: RNCC: 3 | RNVC: 2

26 Jan 1978

5340-15-052-6384
Resilient Mount

150526384
G88-110-511: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-138-2245
Tenditore Ad Occhio

151382245
TE20C00160: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-189-2188
Brass

151892188
TOPB003013: RNCC: 3 | RNVC: 2

9 Feb 2010

5340-15-100-3316
Handwheel

151003316
45015440: RNCC: 3 | RNVC: 2

27 Oct 1985

5340-15-194-8298
Cricca Di Tensionam

151948298
20080000701502: RNCC: 3 | RNVC: 2
(241)A611420080000701502: RNCC: 5 | RNVC: 2

24 Jan 2011

5340-15-105-6327
Collare Serraggio

151056327
10168590: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-198-1854
Fondo Tamburo

151981854
0253112: RNCC: 3 | RNVC: 2

24 Jun 2004

5340-15-062-0102
Handle

150620102
C7123R1A3: RNCC: 3 | RNVC: 2
C7123R1A3: RNCC: 5 | RNVC: 2
C7123R1A3: RNCC: 5 | RNVC: 9

27 Oct 1980

5340-15-118-1943
Resilient Mount

151181943
4230735: RNCC: 3 | RNVC: 2
4230735: RNCC: 5 | RNVC: 2
93160906: RNCC: 5 | RNVC: 2

22 Apr 1994

5340-15-127-4805
Anello Arresto Peda

151274805
852532: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-122-2229
Nonmetallic Bumper

151222229
151403202: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-116-7931
Piastrina Di Blocca

151167931
DPR24150/2-18: RNCC: 3 | RNVC: 2

18 Nov 1993

5340-15-040-3465
Molla A Trazione

150403465
5-8121-1-00-21959-2: RNCC: 3 | RNVC: 2
5-8121-100-21959-2: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-134-6030
Staffa Sinistra Cof

151346030
5935430: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-166-5238
Ring

151665238
7000021: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-162-3254
Erg Maintenance Kit

151623254
159719: RNCC: 3 | RNVC: 2
47200829: RNCC: 5 | RNVC: 2

27 Jun 2001

5340-15-199-9290
Threaded End Tensioning Tie Rod

151999290
A15163-M7-215TE: RNCC: 3 | RNVC: 2
(241)A0984A15163-M7-215TE: RNCC: 5 | RNVC: 2

27 Jul 2005

5340-15-001-1999
Ex Attachment Assy

150011999
129-B605-11-041: RNCC: 3 | RNVC: 2

3 Jun 2013

5340-15-138-0287
Terminale

151380287
70-9180-11: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-062-5357
Anchor Strap

150625357
074029 X: RNCC: 3 | RNVC: 2

1 May 1977

5340-15-169-0321
Padlock

151690321
F72005387: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-199-5022
Engine Accessory Bracket

151995022
1Q 606589: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-15-237-7413
Maniglia Per Porta

152377413
534015E082735: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-197-8669
Manual Control Lever

151978669
N523G5291201: RNCC: 3 | RNVC: 2

21 May 2004

5340-15-231-1137
Lucchetto Morso Mm.

152311137
4231: RNCC: 3 | RNVC: 2
534015E089893: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-071-4191
Handwheel

150714191
1116: RNCC: 3 | RNVC: 2

1 May 1981

5340-15-170-8108
Supporto Accoppiame

151708108
340-0727/15: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-136-0491
Maniglia

151360491
ART17-03-1: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-060-6084
Piastrina Guidacavo

150606084
62656-102A1: RNCC: 3 | RNVC: 2

16 Jun 1977

5340-15-051-3763
Fascetta

150513763
751459-11: RNCC: 3 | RNVC: 2
9913332: RNCC: 3 | RNVC: 2
75145911: RNCC: 5 | RNVC: 2
75145911: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-007-2040
Nut And Bolt Locking Plate

150072040
1383625: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-180-7476
Antipilferage Seal

151807476
1N180100001: RNCC: 3 | RNVC: 2

17 Jul 2008

5340-15-176-2746
Cerniera Porta F30t

151762746
00063784: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-125-5952
Rondella

151255952
AN960KD1716L: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-118-6156
Taquet

151186156
9431849: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-122-2908
Protege Disque

151222908
800074159: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-063-9265
Tirante Speciale

150639265
2640-73003: RNCC: 3 | RNVC: 2
2640-73003: RNCC: 5 | RNVC: 9

6 Dec 1982

5340-15-156-4248
Special Blocchetto

151564248
3M424N3010: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-214-9365
Cassetta Assortimen

152149365
E405100: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-180-3956
Protection Net

151803956
N925G9182201: RNCC: 3 | RNVC: 2

12 May 2008

5340-15-107-6397
Complessiv Supporto

151076397
301819G1: RNCC: 3 | RNVC: 2

27 Oct 1988

5340-15-200-2729
Piastra

152002729
232090: RNCC: 3 | RNVC: 2
0000000130130: RNCC: 4 | RNVC: 1
(241)A39630000000130130: RNCC: 5 | RNVC: 2

20 Nov 2005

5340-15-127-4542
Valvola Molla Int.

151274542
851909: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-112-8121
Spiraled

151128121
468643: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-192-4129
Gear Puller

151924129
68400029A: RNCC: 3 | RNVC: 2

16 Mar 2010

5340-15-155-0918
Nut And Bo Retainer

151550918
J57150516-003: RNCC: 3 | RNVC: 2

17 Jan 2002

5340-15-066-1667
Clamp

150661667
P894630-001: RNCC: 3 | RNVC: 2

10 Feb 1986

5340-15-200-6231
Sistema Di Serraggi

152006231
NTH 01/05BB.003.106: RNCC: 3 | RNVC: 2
(241)AG057NTH 01/05BB.003.106: RNCC: 5 | RNVC: 2

7 Feb 2006

5340-15-113-7931
Semicerniera

151137931
129-0640-39-135: RNCC: 3 | RNVC: 2

27 Feb 1992

5340-15-164-8097
Assieme Asta

151648097
263A1875-401: RNCC: 3 | RNVC: 2
(241)A2142263A1875-401: RNCC: 5 | RNVC: 2
263A1875401: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-153-8183
Manual Control Lever

151538183
16014A134010: RNCC: 5 | RNVC: 3
16014A134010: RNCC: 5 | RNVC: 9

1 Mar 2001

5340-15-187-2178
Supporto Munizione

151872178
174801012: RNCC: 3 | RNVC: 2
(241)A0199174801012: RNCC: 5 | RNVC: 2

25 Feb 2009

5340-15-166-5124
Cilindro Per Serrat

151665124
CLNDRSRRTR: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-135-8458
Tappo In Sughero

151358458
LLLS31TYIGRACL1N12: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-116-5926
Cablaggio Posterior

151165926
006A1182-801: RNCC: 3 | RNVC: 2

2 Jun 1993

5340-15-119-3792
Mensola Completa

151193792
60173536: RNCC: 3 | RNVC: 2

25 Jul 1994

5340-15-117-7833
Elemento Elastico

151177833
1P 580819LA: RNCC: 3 | RNVC: 2
1P 580819LA: RNCC: 5 | RNVC: 9

21 Mar 1996

5340-15-182-9149
Fascetta

151829149
2665363: RNCC: 3 | RNVC: 2
2665363: RNCC: 5 | RNVC: 9

30 Dec 2008

5340-15-230-7183
Supporto Antivibraz

152307183
8636.001: RNCC: 3 | RNVC: 2
534015E150310: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-166-5248
Tassello Fischer

151665248
SB122: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-137-8050
Paracolpi In Gomma

151378050
1113-21-901: RNCC: 3 | RNVC: 2
(7001)5340151378050: RNCC: 5 | RNVC: 2

10 Oct 1996

Load More Results