What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 34 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 34 of 72

5340-15-220-0668
Telaio Porta U 200

152200668
S1-144B: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-156-2137
Support

151562137
(241)A3460CBD71149P05: RNCC: 3 | RNVC: 2
CBD71149P05: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-158-5596
Rubber Bumper

151585596
122607464: RNCC: 3 | RNVC: 2

9 Mar 2004

5340-15-166-4935
Molla

151664935
93901763: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-218-1448
Lucchetto Mm.30

152181448
21010-30: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-135-9940
Tassello

151359940
4617444: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-142-5249
Antivibrante

151425249
AT672-S.A.V.30-30: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-061-4700
Supporto Angolare S

150614700
P135239-002: RNCC: 3 | RNVC: 2

26 Jan 1978

5340-15-113-9669
Flangiacentraggio

151139669
214A2010-001: RNCC: 3 | RNVC: 2

31 Mar 1992

5340-15-068-4896
Turnbuckle Body

150684896
2881-18: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-120-6859
Attua Stelo Pistone

151206859
D0483777: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-178-9215
Douille

151789215
PA103MD004AA00: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-15-118-6081
Bande

151186081
73128615: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-149-8267
Sportello Di Access

151498267
40346160: RNCC: 3 | RNVC: 2
40346160: RNCC: 5 | RNVC: 2

2 Jun 1999

5340-15-170-1373
Lucchetto A Combin.

151701373
15E049137: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-003-3877
Helical Compression Spring Seat

150033877
ED0064100980-S: RNCC: 3 | RNVC: 2

5 Nov 2013

5340-15-000-6452
Aluminum Lug Well C

150006452
TRYA1001A5: RNCC: 3 | RNVC: 2

27 Mar 2013

5340-15-123-7054
Raccordo Femmina Is

151237054
1624G/6,3: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-147-6956
Cerniera A Bandelle

151476956
0702 00400: RNCC: 3 | RNVC: 2
BOF 20937: RNCC: 5 | RNVC: 2
0702 00400: RNCC: 5 | RNVC: 2
STC2435: RNCC: 5 | RNVC: 2

3 Mar 1998

5340-15-115-2740
Lever Locking

151152740
518331280: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-154-0808
Testa Di Tirante Fi

151540808
60187624: RNCC: 3 | RNVC: 2
(241)A424960187624: RNCC: 5 | RNVC: 2
1PA424960187624: RNCC: 8 | RNVC: 2

20 Mar 2001

5340-15-235-4372
Cerniera Con Perno

152354372
105-140: RNCC: 3 | RNVC: 2
534015E075474: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-110-2888
Bracket Fue

151102888
P120084-001: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-204-3255
Telaio

152043255
0000500428474: RNCC: 3 | RNVC: 2
(241)A39630000500428474: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-067-0196
Zinco Protettivo

150670196
34491A76541POS11: RNCC: 2 | RNVC: 2

1 Apr 1998

5340-15-116-9947
Protection Capotage

151169947
79038945: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-118-6079
Commande

151186079
73128609: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-220-0468
Piatto 100 Sp6 L138

152200468
S1-9B: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-120-5137
Lever

151205137
P-175501-401/402-14E001-205/2: RNCC: 3 | RNVC: 2
P175501-401/402-14E001-205/2: RNCC: 5 | RNVC: 2

28 Jun 1995

5340-15-149-7116
Anchor Strap

151497116
800059388: RNCC: 3 | RNVC: 2

7 May 1999

5340-15-198-1850
Corredo Dischi

151981850
0153132: RNCC: 3 | RNVC: 2

24 Jun 2004

5340-15-152-2527
Manual Control Lever

151522527
109-0011-06-105: RNCC: 3 | RNVC: 2

17 Aug 2000

5340-15-100-3408
Dust And Moisture Seal Protective Cap-Plug

151003408
C7187-W11-C1: RNCC: 3 | RNVC: 2
C7187-W11-C1: RNCC: 5 | RNVC: 2
C7187-W11-C1: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-066-4243
Tappo Di Carica Com

150664243
67-701012-401: RNCC: 3 | RNVC: 2

12 Dec 1984

5340-15-222-2285
Piastre Fissaggio

152222285
S1-110B: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-113-5128
Compassoarrestoport

151135128
SH.4255-402: RNCC: 3 | RNVC: 2

27 Aug 1991

5340-15-127-4368
Distanziale Attacco

151274368
1740-45-070: RNCC: 3 | RNVC: 2
1740-45-070: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-174-7548
017 6 2Cu 0 Fr4 1

151747548
58572-03/016: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-105-8188
Sostegno Elastico

151058188
2-210-16: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-230-1775
Clamp

152301775
678063: RNCC: 3 | RNVC: 2
534015E149979: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-179-7348
Multiple Angle Bracket

151797348
500371778: RNCC: 3 | RNVC: 2
(241)A4249500371778: RNCC: 5 | RNVC: 2

7 Jun 2007

5340-15-196-9923
Padlock

151969923
PN UAS 00020318: RNCC: 3 | RNVC: 2
5340F76014255: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-001-6448
Molla

150016448
174010005: RNCC: 3 | RNVC: 2
174010005: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-135-9474
Tassello Elasti

151359474
5968403: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-235-4373
Cerniera Con Perno

152354373
105-200: RNCC: 3 | RNVC: 2
534015E075475: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-175-5095
Golfare Maschio M12

151755095
L2225/1-M12: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-006-3603
Locking Plate Nut A

150063603
25250B053: RNCC: 3 | RNVC: 2

26 Oct 1979

5340-15-106-2035
Comando Impugnatura

151062035
3-119: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-216-1450
Coltello X Cablator

152161450
COLTELLO: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-233-3182
Ruotino Pivottante

152333182
2CARRS9013: RNCC: 3 | RNVC: 2
534015E122251: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-180-5319
Seal Retainin Plate

151805319
129-0640-50-219: RNCC: 3 | RNVC: 2
(241)A0126129-0640-50-219: RNCC: 5 | RNVC: 2

16 Jun 2008

5340-15-060-1575
Cover Plate Access

150601575
1376-81-174: RNCC: 3 | RNVC: 2
137681174: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-199-5403
Doorstop

151995403
ART.1203: RNCC: 3 | RNVC: 2

17 Apr 2005

5340-15-008-1143
Double Angle Bracket

150081143
1009.050.01: RNCC: 3 | RNVC: 2

28 Jan 1981

5340-15-100-0914
Access Cover

5340-15-068-5798
Compression Helical Spring

5340-15-148-8560
Dashpot

151488560
1131CSP056: RNCC: 3 | RNVC: 2

12 Oct 1998

5340-15-058-2873
Electronic Equipment Hardware Kit

150582873
21-96: RNCC: 3 | RNVC: 2

27 Mar 1975

5340-15-180-3277
Piastra Di Montaggi

151803277
504116613: RNCC: 3 | RNVC: 2
(241)A4249504116613: RNCC: 3 | RNVC: 2

18 Apr 2008

5340-15-074-4074
Turnbuckle

150744074
2B6UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-170-8866
Bodenablauf Kpl.

151708866
TE403501R: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-117-9194
Bielletta Assieme

151179194
232A1514-402: RNCC: 3 | RNVC: 2

31 Jan 1994

5340-15-231-1359
Piastrina Sicurezza

152311359
4256384: RNCC: 3 | RNVC: 2
534015E075126: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-117-7019
Resilient Mount

151177019
1Q 575440LB: RNCC: 3 | RNVC: 2
1Q 575440LB: RNCC: 5 | RNVC: 9

23 Nov 1994

5340-15-206-9003
Confezione Da 10 Gr

152069003
09903981: RNCC: 3 | RNVC: 2
(241)A394409903981: RNCC: 5 | RNVC: 2

25 Jul 2012

5340-15-112-8163
Levadic

151128163
469598: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-160-0902
Lucchetto S&G

151600902
F720129831: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-181-6310
Ancorante Pesante H

151816310
371776: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-156-5207
Manicotto Appoggio

151565207
21200077-24: RNCC: 3 | RNVC: 2

21 Feb 2003

5340-15-197-8817
Antivibrante

151978817
MG30: RNCC: 3 | RNVC: 2

24 May 2004

5340-15-220-3488
Ruota Senza Freno

152203488
150X40SENZAFRENO: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-118-0432
Supporto Filtro Nf

151180432
D0485601: RNCC: 3 | RNVC: 2

5 Dec 1994

5340-15-198-5643
Cavetto Metallico D

151985643
10490064: RNCC: 3 | RNVC: 2

14 Oct 2004

5340-15-124-4124
Serratura A Due Man

151244124
44462-80: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-116-5894
Cerniera Completa S

151165894
117A1110-401: RNCC: 3 | RNVC: 2

2 Jun 1993

5340-15-181-4219
Insert

151814219
354533-2: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-231-6627
Cinghia

152316627
0-130019: RNCC: 3 | RNVC: 2
534015E151191: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-007-0735
Fascetta Speciale

150070735
0-02301: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-150-4940
Cerniera Speciale

151504940
129-0380-10-101: RNCC: 3 | RNVC: 2

22 Nov 1999

5340-15-193-6826
Stand Base

151936826
163106164: RNCC: 3 | RNVC: 2
163106164: RNCC: 5 | RNVC: 2
(241)A0199163106164: RNCC: 5 | RNVC: 2

28 Jun 2010

5340-15-109-9001
Semiguscio Sferico

151099001
468880: RNCC: 3 | RNVC: 2
D0468880: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-214-2123
Lastrina Ad Angolo

152142123
6X6: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-109-1530
Metallo Cuneo

151091530
100900329500: RNCC: 5 | RNVC: 2
100900329500: RNCC: 5 | RNVC: 9

19 Jul 1989

5340-15-103-0995
Electrical-Me Post

151030995
DE160.02.118: RNCC: 3 | RNVC: 2
(241)A5015DE160.02.118: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-163-1537
Clip

151631537
1304989080: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-179-1252
Strap

151791252
014000: RNCC: 3 | RNVC: 2

13 Jun 2006

5340-15-210-5572
Assieme Rullo

152105572
251925-G1: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-068-9660
Rubber Bumper

150689660
374408: RNCC: 3 | RNVC: 2

27 Sep 1985

5340-15-004-9939
Clamp

150049939
182UTB140: RNCC: 3 | RNVC: 2

9 Dec 2013

5340-15-166-5181
Supporto Per Anello

151665181
964530X30: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-112-1350
Flangia

151121350
L3866048: RNCC: 3 | RNVC: 2
DE160.03.400: RNCC: 5 | RNVC: 2

12 Feb 1991

5340-15-103-0411
Tassello Elastico

151030411
76004440: RNCC: 3 | RNVC: 2

21 Jun 1987

5340-15-154-1750
Supporto Cardanico

151541750
130169-1: RNCC: 3 | RNVC: 2

27 Mar 2001

5340-15-114-1768
Plate

151141768
79331F91/B: RNCC: 3 | RNVC: 2
3551291401: RNCC: 3 | RNVC: 2

19 May 1992

5340-15-107-8585
Tassello Elastico

151078585
60125367: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-109-7516
Helical Compression Spring Seat

151097516
8833436: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-159-9744
Rubber Bumper

151599744
122607469: RNCC: 3 | RNVC: 2

19 Apr 2004

5340-15-114-3175
Blocchetto Filettat

151143175
CF431415: RNCC: 3 | RNVC: 2

4 Jun 1992

5340-15-180-3651
Staffa Speciale

151803651
2600256: RNCC: 3 | RNVC: 2
2600256: RNCC: 5 | RNVC: 2

29 Apr 2008

5340-15-185-4667
Tasselli A Rete Fip

151854667
20X85R: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-007-7586
Coperchio Speciale

150077586
0-56560: RNCC: 3 | RNVC: 2

23 Apr 1980

5340-15-068-2329
Anchor Strap

150682329
W011551: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-147-2809
Handwheel

151472809
E81774: RNCC: 3 | RNVC: 2

31 Jul 2000

5340-15-166-4840
Attachment

151664840
212030164075: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-187-1262
Adapter

151871262
COL56/18-08: RNCC: 3 | RNVC: 2

19 Feb 2009

5340-15-154-1019
Corrosion Preventive Anode

151541019
NAV-MM-001-A1-80X500: RNCC: 2 | RNVC: 2

21 Mar 2001

5340-15-212-7658
Piastrina

152127658
454-0007: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-118-6083
Bord Decoupe

151186083
73128972: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-199-9235
Corrosion Preventive Anode

151999235
1POLL-ARMCO: RNCC: 3 | RNVC: 2

27 Jul 2005

5340-15-060-5076
Resilient Mount Plate

150605076
776582T: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-212-5598
Elettrochiavistello

152125598
99465: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-066-1156
Rod

150661156
01TC21197: RNCC: 3 | RNVC: 2

10 Feb 1986

5340-15-166-4867
Molletta

151664867
7645999: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-116-2957
Supportoangolarespe

151162957
190515225: RNCC: 3 | RNVC: 2

19 Apr 1993

5340-15-184-9915
Ingrassatore

151849915
2239584: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-166-5228
Thermostat Ass

151665228
83469201: RNCC: 3 | RNVC: 2
83469201: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-179-3002
Body

151793002
02221044: RNCC: 3 | RNVC: 2

16 Oct 2006

5340-15-109-9017
Assieme Tappo

151099017
467913: RNCC: 3 | RNVC: 2
D0467913: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-152-7426
Tirante Speciale

151527426
21440099A: RNCC: 3 | RNVC: 2
3144G0099A: RNCC: 5 | RNVC: 2

20 Oct 2000

5340-15-153-6409
Speci Chiavistello

151536409
142010241: RNCC: 1 | RNVC: 3

20 Feb 2001

5340-15-116-8591
Cilindro Fondello

151168591
D0469530: RNCC: 3 | RNVC: 2

8 Apr 1994

5340-15-127-5740
Staffetta Fiss.Tubi

151275740
966008: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-155-4935
Base

151554935
CBD70792P01: RNCC: 3 | RNVC: 2

28 Mar 2002

5340-15-144-0526
Handwheel

151440526
591613-2: RNCC: 3 | RNVC: 2
12497: RNCC: 3 | RNVC: 2

11 Dec 1996

5340-15-120-9286
Semicerniera

151209286
113A6012-752: RNCC: 3 | RNVC: 2

5 Sep 1995

5340-15-122-2699
Caoutchouc Repose

151222699
800046488: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-137-8021
Paracolpi In Gomma

151378021
1113-14-145: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-153-4019
Elettro-Me Raccordo

151534019
5137-320-10: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-004-4211
Chiavistello Specia

150044211
27464-001: RNCC: 3 | RNVC: 2

23 Oct 1977

5340-15-179-9389
Support

151799389
504085184: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-115-5426
Piastra Di Collegam

151155426
D0483607: RNCC: 3 | RNVC: 2

6 Jun 1994

5340-15-123-6792
Cerniera Di Ottone

151236792
DIAM.20: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-117-7255
Staffa Di Sostegno

151177255
1Z 602713: RNCC: 3 | RNVC: 2
1Z 602713: RNCC: 5 | RNVC: 9

24 Jan 1995

5340-15-117-6380
Turnbuckle Body

151176380
142502186: RNCC: 3 | RNVC: 2

4 Jan 1994

5340-15-115-7106
Maschera Per Dicitu

151157106
D0489286: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-187-8859
Safety Plate

151878859
613 18: RNCC: 3 | RNVC: 2

19 May 2009

5340-15-055-1363
Faecetta Sagomata

150551363
9503-106: RNCC: 3 | RNVC: 2

6 Apr 1972

5340-15-041-2395
Gambo Forcella

150412395
1-7055-101-34773: RNCC: 3 | RNVC: 2
1-7055-1-01-34773: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-170-5702
Door Handle

151705702
805-4004-012: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-15-193-5498
Dust And Moisture Seal Protective Cap-Plug

151935498
SPBV.06003: RNCC: 3 | RNVC: 2

8 Jun 2010

5340-15-151-2846
Threaded Rod End

151512846
541211970: RNCC: 3 | RNVC: 2
554121197000: RNCC: 5 | RNVC: 2

8 Jun 2000

5340-15-107-6399
Speciale Piastra

151076399
301833P1: RNCC: 3 | RNVC: 2

27 Oct 1988

5340-15-101-4747
Supporto Angolare

151014747
000200333100: RNCC: 5 | RNVC: 2
000200333100: RNCC: 5 | RNVC: 9

30 May 1987

5340-15-112-2534
Assiemea

151122534
377A1658-403: RNCC: 3 | RNVC: 2

11 Mar 1991

5340-15-157-2211
Headless Straight Rod

151572211
41042335: RNCC: 3 | RNVC: 2
(241)A424941042335: RNCC: 5 | RNVC: 2

27 May 2003

5340-15-002-2297
Access Door Locking Ring

150022297
11.227.51.07: RNCC: 3 | RNVC: 2

30 Jul 2013

5340-15-108-9469
Helical Compression Spring Seat

151089469
1PDL021: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-154-9348
Cover

151549348
CBD71101P01: RNCC: 3 | RNVC: 2

13 Nov 2001

5340-15-149-3147
Valvola Limitatrice

151493147
4886094: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-163-1690
Support

151631690
1309309080: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-166-4985
Guide Bracket

151664985
428A1045001: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-154-9196
Base

151549196
CBD70713P01: RNCC: 3 | RNVC: 2

12 Nov 2001

5340-15-204-3305
Mensola

152043305
0000500428518: RNCC: 3 | RNVC: 2
(241)A39630000500428518: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-101-9147
Resilient Mount

151019147
1P 306278: RNCC: 3 | RNVC: 2
1P306278: RNCC: 3 | RNVC: 2
1P306278: RNCC: 5 | RNVC: 9
1P 306278: RNCC: 5 | RNVC: 9

25 Nov 1992

5340-15-120-6874
Vaschetta Raccolta

151206874
D0471517: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-200-4887
Piastra Per Leva Di

152004887
N967G7129201: RNCC: 3 | RNVC: 2
(241)A0126N967G7129201: RNCC: 5 | RNVC: 2

25 Jan 2006

5340-15-113-7939
Cerniera Portello A

151137939
129-0640-41-102: RNCC: 3 | RNVC: 2

27 Feb 1992

5340-15-136-1187
Staffa

151361187
5935327: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-154-7513
Scatola Capicorda

151547513
ZMD98XX-PDR099: RNCC: 3 | RNVC: 2

17 Sep 2001

5340-15-049-6478
Forcella

150496478
2-3211-201-42020: RNCC: 3 | RNVC: 2
2-3211-2-01-42020: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-187-4408
Plate(Lh)

151874408
109-0041-27-101: RNCC: 3 | RNVC: 2

31 Mar 2009

5340-15-122-1179
Piastrina Ritegno R

151221179
129-0305-23-105: RNCC: 3 | RNVC: 2

14 May 1996

5340-15-149-3195
Multiple Angle Bracket

151493195
4886486: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-001-8310
Dust And Moisture Seal Protective Cap

150018310
5949790826: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-120-0872
Double Angle Bracket

151200872
60165713: RNCC: 3 | RNVC: 2

19 Dec 1994

5340-15-166-4815
Ass.Squadretta

151664815
DE03820339831: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-068-2298
Anchor Strap

150682298
W011570: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-051-4142
Tassello Elastico

150514142
4023936: RNCC: 3 | RNVC: 2
4023936: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-118-0308
Otturatore Valvola

151180308
D0388476: RNCC: 3 | RNVC: 2

7 Dec 1994

5340-15-118-6240
Support

151186240
ANAA1A31: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-156-3595
Dado Normale Esagon

151563595
(241)A3460CBD71410P01: RNCC: 3 | RNVC: 2
CBD71410P01: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-123-8470
Escutcheon Plate

151238470
7654720: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-123-8513
Tasselli

151238513
5983798: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-153-1582
Fermacavo

151531582
W016418: RNCC: 3 | RNVC: 2

7 Dec 2000

5340-15-232-0292
Pomello

152320292
719003: RNCC: 3 | RNVC: 2
534015E145212: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-194-4368
Clamping Guide Elem

151944368
21506593: RNCC: 3 | RNVC: 2

12 Nov 2010

5340-15-115-5407
Control Rod

151155407
D0468451: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-211-5126
Lucchetto Mm40 Con

152115126
L012.40.00: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-125-6655
Clamp Identity (Red

151256655
NP001: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-114-7867
Plate

151147867
277.6300.018: RNCC: 3 | RNVC: 2

4 Aug 1992

5340-15-166-4801
Alberino

151664801
232563P1: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-105-0296
Squadretta

151050296
602000318C: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-001-6580
Molla

150016580
174017011: RNCC: 3 | RNVC: 2
174017011: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-181-5559
Cerniera In Ferro M

151815559
CERNIERA75X75: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-108-6209
Control Rod

151086209
60141835: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-193-2511
Piastra Di Montaggi

151932511
504236825: RNCC: 3 | RNVC: 2
(241)A4249504236825: RNCC: 5 | RNVC: 2

22 Apr 2010

5340-15-118-0370
Ruota Guidacavo In

151180370
D0474291: RNCC: 3 | RNVC: 2
474291: RNCC: 3 | RNVC: 2

14 Dec 1994

5340-15-109-5879
Supportotubolatura

151095879
11610026A: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-142-9454
Supporto Elastico

151429454
575428: RNCC: 3 | RNVC: 2
98.1.10808: RNCC: 3 | RNVC: 2
575428: RNCC: 5 | RNVC: 9

9 Jun 1997

5340-15-162-1915
Multiple Angle Bracket

151621915
109-0372-66-101: RNCC: 3 | RNVC: 2

3 Apr 2001

5340-15-055-3538
Cerniera

150553538
205-1-164-01: RNCC: 3 | RNVC: 2
205-1-164-01: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-154-6362
Base (1) Per Sosteg

151546362
553006125000: RNCC: 2 | RNVC: 3
30-06-125: RNCC: 2 | RNVC: 3

31 Jul 2001

5340-15-109-9573
Attacco Longherone

151099573
13267-101C01: RNCC: 3 | RNVC: 2
13267-101C1: RNCC: 5 | RNVC: 2
13267-101C1: RNCC: 5 | RNVC: 9
13267-101C01: RNCC: 5 | RNVC: 9

14 Mar 1990

5340-15-109-3971
Electrical-Me Post

151093971
5137-309-11: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-187-5350
Screw Thread Insert

151875350
61580-26/111: RNCC: 3 | RNVC: 2

9 Apr 2009

5340-15-195-3639
Access Door Locking Ring

151953639
DGB-13KL-019: RNCC: 3 | RNVC: 2
(241)AE591DGB-13KL-019: RNCC: 5 | RNVC: 2

21 Mar 2011

5340-15-182-5397
Tassello Elastico

151825397
46467328: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-174-6597
Non Drive End Brack

151746597
6102306048: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-15-161-2503
Control Rod

151612503
0391800326: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-15-189-8085
Barra Filettata

151898085
BARRA6X100: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-106-5409
Staffa Fissaggio

151065409
42013558: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-054-2980
Key Blank

150542980
NP17: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-219-4224
Tasselli Mod.Sx6s I

152194224
413-8496: RNCC: 5 | RNVC: 3
534015E148852: RNCC: 5 | RNVC: 9

16 Nov 2005

5340-15-105-2146
Passacavo Gomma

151052146
2.6560.013.0: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-207-8545
Male Ball Joint M10

152078545
440-9-4-2: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-062-8783
Anello Fermo Specia

150628783
0-42632: RNCC: 3 | RNVC: 2

9 Feb 1982

5340-15-194-0097
Support Assy

151940097
340258300000: RNCC: 3 | RNVC: 2

12 Aug 2010

5340-15-144-6722
Piastrina Di Ritegn

151446722
SP712: RNCC: 3 | RNVC: 2
STAVETRASP12: RNCC: 3 | RNVC: 2

11 Dec 1996

5340-15-006-7124
Adapter

150067124
30063-403: RNCC: 3 | RNVC: 2

9 Jan 1980

5340-15-198-3833
Supporto Elastico

151983833
3E403083001: RNCC: 3 | RNVC: 2

24 Sep 2004

5340-15-119-8667
Protect

151198667
75107: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-063-0778
Piastra Forata Spec

150630778
4628797: RNCC: 3 | RNVC: 2

15 Jun 1982

5340-15-147-3069
Latch Strap

151473069
NG-PNF: RNCC: 3 | RNVC: 2

31 Oct 1997

5340-15-203-6696
Support

152036696
G2212735019-701: RNCC: 3 | RNVC: 2

24 Jun 2011

5340-15-108-1419
Supporto Tubazioni

151081419
109-0761-96-11: RNCC: 3 | RNVC: 2

15 Jul 1987

5340-15-113-5692
Threaded End Tensioning Tie Rod

151135692
67759-103B00: RNCC: 3 | RNVC: 2

14 Jan 1992

5340-15-108-7632
Resilient Mount

151087632
AC100FE: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-115-7130
Flangia Tubo Misura

151157130
D1401138: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-15-107-5708
Staffa Di Fissaggio

151075708
DE013.12.802: RNCC: 3 | RNVC: 2
(241)A5015DE013.12.802: RNCC: 5 | RNVC: 2

5 Jan 1989

5340-15-127-5528
Pomello Fiss.Coperc

151275528
885262: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-186-0889
Cerniera 2 Ali X Fe

151860889
CERNIERA12: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-199-8068
Piede Del Sopporto

151998068
CST.1193-F: RNCC: 3 | RNVC: 2
(241)A0984CST.1193-F: RNCC: 5 | RNVC: 2

7 Jun 2005

5340-15-121-9015
Supporto Speciale C

151219015
142503914: RNCC: 3 | RNVC: 2

19 Mar 1996

5340-15-156-1017
Tappo Bocchettone R

151561017
N636G10B1012: RNCC: 3 | RNVC: 2
N632G20B1022: RNCC: 5 | RNVC: 9

22 Nov 2002

5340-15-153-2638
Turnbuckle Body

151532638
122611392: RNCC: 2 | RNVC: 3

12 Dec 2000

5340-15-006-3622
Locking Plate Nut E

150063622
25250B043: RNCC: 3 | RNVC: 2

26 Oct 1979

5340-15-175-5978
Serragiunto

151755978
EX5340RI4219247: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-219-9500
Tassello Ad Espansi

152199500
S12: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-166-5245
Cap

151665245
NAS8144B: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-020-1912
Ghiera

150201912
01-231P11: RNCC: 3 | RNVC: 2
55.17.003.A: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-089-9369
Dust And Moisture Seal Protective Cap

150899369
A75945-7: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-120-6608
Resilient Mount Plate

151206608
D0471146: RNCC: 3 | RNVC: 2

28 Jun 1996

5340-15-125-4009
Protezione

151254009
FL0693-101: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-213-1870
Nastro Per Levigatr

152131870
NASTRO-75X480GRANA60: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-136-9361
Fascetta

151369361
47-680-050-3: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-123-6794
Handwheel

151236794
77711-VR250: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-114-0513
Coperchioaccesso

151140513
78710: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-15-063-0733
Cover Plate Access

150630733
8837893: RNCC: 3 | RNVC: 2

15 Jun 1982

5340-15-135-9884
Tappo

151359884
2597: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-062-1735
Nut And Bolt Locking Plate

150621735
012129 J: RNCC: 3 | RNVC: 2

1 May 1977

5340-15-179-9165
Support Assy

151799165
212-8955-01-101: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-001-6458
Molla

150016458
174015005: RNCC: 3 | RNVC: 2
174015005: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-193-2512
Piastra Di Montaggi

151932512
504236840: RNCC: 3 | RNVC: 2
(241)A4249504236840: RNCC: 5 | RNVC: 2

22 Apr 2010

5340-15-123-9062
Semifascetta

151239062
42045527: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-112-8298
Fodera

151128298
467101: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-202-9460
Lh Half Hinge

152029460
N523G5365201: RNCC: 3 | RNVC: 2
(241)A0126N523G5365201: RNCC: 5 | RNVC: 2

7 Oct 2007

5340-15-136-7461
Spina Sgancio Rapid

151367461
B508RD: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-136-5117
Maniglia Portiera

151365117
S6122-82424-3: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-105-8492
Maniglia Ribaltabil

151058492
2104710: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-174-6605
Rear Case

151746605
9903905370: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-15-123-6679
Snodo In Durall

151236679
2GMVDIS16-92: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-127-4258
Molla Tirante Elast

151274258
848973: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-150-1106
Helical Compression Spring Retainer

151501106
77071176: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-199-4977
Engine Accessory Bracket

151994977
77787F91: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-15-112-8481
Portaboccola

151128481
467676: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-007-7449
Helical Compression Spring Retainer

150077449
06581: RNCC: 3 | RNVC: 2
06581: RNCC: 3 | RNVC: 2

1 Mar 1980

5340-15-065-1720
Bracket

150651720
A12112-006: RNCC: 3 | RNVC: 2

15 Apr 1985

5340-15-117-0631
Access Door

151170631
79033760: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-074-4258
Turnbuckle

150744258
2D10UNI20190T60-2012AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-006-2562
Guida Speciale

150062562
0-28882: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-007-3764
Anello Elastico Spe

150073764
0-34080: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-007-0909
Supporto Speciale

150070909
0-28011: RNCC: 3 | RNVC: 2

29 Jun 1979

5340-15-107-4363
Turnbuckle Body

151074363
1Q 577050: RNCC: 3 | RNVC: 2
1Q 577050: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-175-6655
Blockiergriff

151756655
XA81111: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-170-8575
Lastra 358X272x1.6

151708575
58311-11/037: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-153-7659
Base (1) Per Sosteg

151537659
01800A105210: RNCC: 5 | RNVC: 2
01800A105210: RNCC: 5 | RNVC: 9

27 Feb 2001

5340-15-074-4246
Turnbuckle

150744246
1D10UNI20190T60-2012A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-074-4030
Turnbuckle

150744030
2A6UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-194-3619
Plate Assembly

151943619
109-0881-33-203: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-15-052-1218
Barretta Filettata

150521218
N0R4-019-01-20: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-111-7274
Holder

151117274
F304C3A12-02: RNCC: 3 | RNVC: 2
F304C3A12-02: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-074-4233
Turnbuckle

150744233
2C8UNI20190T60-2012AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-206-4758
Handle

152064758
C7565-00: RNCC: 3 | RNVC: 2

13 Jun 2012

5340-15-174-7442
Esag. Inox7 Aisi 30

151747442
51260-12/009: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-168-9820
Padlock

151689820
F72003990: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-120-6408
Turnbuckle Body

151206408
D0466800: RNCC: 3 | RNVC: 2

26 Jun 1996

5340-15-156-3665
Column Support

151563665
(241)A3460CBD71405P12: RNCC: 3 | RNVC: 2
CBD71405P12: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-170-6707
Manual Control Handle

151706707
74-201494A: RNCC: 3 | RNVC: 2

5 May 2003

5340-15-056-6034
Anello Sussidiario

150566034
15922: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-107-1846
Manual Control Handle

151071846
RS304777A: RNCC: 3 | RNVC: 2

24 May 1989

5340-15-063-8022
Nut And Bolt Locking Plate

150638022
586932: RNCC: 3 | RNVC: 2

31 Mar 1982

5340-15-220-0693
Latch Assy (Valido

152200693
263A1866-401: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-002-7241
Molla Valvola Start

150027241
2154: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-122-2694
Nonmetallic Bumper

151222694
800045490: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-139-3243
Tirante

151393243
1390977: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-180-5951
Straight Flute Drill Set

151805951
122607642: RNCC: 3 | RNVC: 2

24 Jun 2008

5340-15-119-9056
Helical Compression Spring Retainer

151199056
142004026: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-068-2311
Anchor Strap

150682311
W011887: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-186-8540
Swivel Mount

151868540
A630A31: RNCC: 3 | RNVC: 2

5 Jan 2009

5340-15-074-4281
Turnbuckle

150744281
2A6UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-101-9583
Appendiabiti

151019583
049: RNCC: 3 | RNVC: 2

21 Oct 1986

5340-15-068-3015
Leva Speciale

150683015
RS 300 825 AR: RNCC: 3 | RNVC: 2

27 Oct 1984

5340-15-060-6617
Cerniera Inferiore

150606617
1971TAV69-22PART2DESTRA: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-206-8883
Utility Resilient Mount

152068883
1Q346430: RNCC: 3 | RNVC: 2

24 Jul 2012

5340-15-122-2340
Manual Control Handle

151222340
8A0066776: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-166-5011
Rh (Spare Par Hinge

151665011
113A6022752: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-116-3309
Speciale Copertura

151163309
263A1592-001: RNCC: 3 | RNVC: 2

22 Apr 1993

5340-15-179-4053
Handwheel

151794053
500045: RNCC: 3 | RNVC: 2

28 Nov 2006

5340-15-001-6554
Molla

150016554
174016082: RNCC: 3 | RNVC: 2
174016082: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-156-9880
Protection Hinge

151569880
311A5540-751: RNCC: 3 | RNVC: 2

1 Apr 2003

5340-15-119-2431
Camma Complessivo

151192431
212-1300-22-102: RNCC: 3 | RNVC: 2

29 Mar 1996

5340-15-232-3870
Rondella Piatta

152323870
5387/53 3-19: RNCC: 3 | RNVC: 2
534015E150125: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-113-2530
Complessivo Staffa

151132530
375A4084-405: RNCC: 3 | RNVC: 2

15 Apr 1991

5340-15-231-9318
Staffa Fissaggio

152319318
99463466: RNCC: 3 | RNVC: 2
534015E137180: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-215-4250
Puntale Flessibile

152154250
PUNTALEROSSO: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-118-0444
Attacco Per Leva

151180444
D0486931: RNCC: 3 | RNVC: 2

5 Dec 1994

5340-15-005-1495
Clamp Loop

150051495
211-592-9216: RNCC: 3 | RNVC: 2

9 Dec 2013

5340-15-109-8975
Obturator

151098975
370150: RNCC: 3 | RNVC: 2
D0370150: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-120-6907
Coperchio Porta Sal

151206907
D0470784: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-054-3284
Staffa

150543284
523545A: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-127-4707
Staffetta Fissaggio

151274707
867203: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-232-3127
Lucchetto Mm.30

152323127
100.30: RNCC: 3 | RNVC: 2

19 Jul 2007

5340-15-188-6775
Stand Base

151886775
157667394: RNCC: 3 | RNVC: 2
(241)A0199157667394: RNCC: 5 | RNVC: 2

21 Oct 2009

5340-15-143-2814
Dust And Moisture Seal Protective Cap

151432814
149069 FIND NO.100: RNCC: 3 | RNVC: 2
IRK 140 (3/4"): RNCC: 3 | RNVC: 2
58100332: RNCC: 5 | RNVC: 2

10 Dec 1996

5340-15-056-5029
Luggage Bumper

150565029
204-031-295-2005: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-152-3495
Staffa

151523495
0-153501: RNCC: 3 | RNVC: 2

4 Sep 2000

5340-15-007-0878
Supporto Speciale

150070878
0-20363: RNCC: 3 | RNVC: 2

29 Jun 1979

5340-15-154-5114
Staffa (1) Accessor

151545114
1R 548235LA: RNCC: 3 | RNVC: 2
1R 548235LA: RNCC: 5 | RNVC: 9

20 Jun 2001

5340-15-202-6589
Giunto A Frizione

152026589
RS410414C: RNCC: 3 | RNVC: 2
(241)A1508RS410414C: RNCC: 5 | RNVC: 2

12 Jun 2007

5340-15-222-2301
Telaio Inferiore Po

152222301
S1-13E5: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-161-2022
Dust And Moisture Seal Protective Cap-Plug

151612022
20H-001: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-15-118-5270
Anode Retaining Plug

151185270
AF-7-15633: RNCC: 3 | RNVC: 2

3 Oct 1994

5340-15-040-2927
Forcella Destremita

150402927
4-3067-100-25053: RNCC: 3 | RNVC: 2
4-3067-1-00-25053: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-009-1477
Nut And Bolt Locking Plate

150091477
1-42446-01: RNCC: 3 | RNVC: 2
14244601: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-149-2901
Multiple Angle Bracket

151492901
4862361: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-007-1071
Nut And Bolt Locking Plate

150071071
25250A053: RNCC: 3 | RNVC: 2

24 Nov 1979

5340-15-170-4256
Support Foot

151704256
161460500: RNCC: 3 | RNVC: 2

16 Jan 2003

5340-15-209-2301
Lucchetto Magnetico

152092301
MAGNETIC MM37: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-113-8667
Supporto

151138667
1Z 590192LA: RNCC: 3 | RNVC: 2
1Z 590192LA: RNCC: 5 | RNVC: 9

13 Jun 1994

5340-15-205-0563
Profilo Fissaggio

152050563
120021274: RNCC: 3 | RNVC: 2
(241)A5009120021274: RNCC: 5 | RNVC: 2

16 Feb 2012

5340-15-127-3081
Molla Richiamo

151273081
716770: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-074-4399
Turnbuckle

150744399
1A30UNI2021A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-237-0563
Staffa

152370563
INDT120: RNCC: 3 | RNVC: 2
534015E032937: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-122-5152
Bracket

151225152
01TL21604: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-179-5281
Supporto Destro Com

151795281
3799556: RNCC: 3 | RNVC: 2
(241)A42493799556: RNCC: 5 | RNVC: 2

2 Mar 2007

5340-15-151-6997
Tassello Gomma

151516997
4736121: RNCC: 3 | RNVC: 2

3 Jul 2000

5340-15-068-7896
Control Rod

150687896
4169975: RNCC: 3 | RNVC: 2

27 May 1985

5340-15-118-0393
Asta Telescopica Co

151180393
D0484594: RNCC: 3 | RNVC: 2

18 Nov 1994

5340-15-231-0678
Protezione Motorino

152310678
00279PMPN: RNCC: 3 | RNVC: 2
534015E140349: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-152-9156
Sostegno Elastico

151529156
202273: RNCC: 3 | RNVC: 2

7 Nov 2000

5340-15-119-9061
Threaded End Tensioning Tie Rod

151199061
142004210: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-060-4008
Tenditore Fisso

150604008
0597: RNCC: 3 | RNVC: 2

8 Feb 1977

5340-15-213-8760
Boccola Scarico Acq

152138760
MA9902: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-213-8539
Cilindro Da Infilar

152138539
08310130: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-118-3364
Resilient Mount

151183364
60145584: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-176-5405
Prolunga In Allumin

151765405
360.014: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-204-4508
Dust And Moisture Seal Protective Cap-Plug Set

152044508
8867988: RNCC: 3 | RNVC: 2
0054615: RNCC: 5 | RNVC: 2

7 Nov 2011

5340-15-194-7853
Attacco Inferiore Z

151947853
58454: RNCC: 3 | RNVC: 2
(241)A348858454: RNCC: 5 | RNVC: 2

14 Jan 2011

5340-15-119-6536
Squadretta Per Anco

151196536
39A1810-10: RNCC: 3 | RNVC: 2

12 Oct 1994

5340-15-051-4758
Turnbuckle Assembly

150514758
7-5623-100-42772: RNCC: 3 | RNVC: 2

30 Jul 1970

5340-15-178-6003
Breech Block Suppor

151786003
541-A-1012: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-139-7925
Porta Maniglia

151397925
1001507: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-129-2749
Molla

151292749
120412: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-213-3123
Serratura Completa

152133123
8301: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-007-7312
Rubber Bumper

150077312
723857: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-003-8997
Dust And Moisture Seal Protective Plug

150038997
182707613: RNCC: 3 | RNVC: 2
(241)A0199182707613: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-005-6499
Tappo Speciale

150056499
0-28537: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-058-5400
Bracket

150585400
2T98167-1: RNCC: 3 | RNVC: 2

6 Nov 1974

5340-15-139-5222
Cerniera Destra

151395222
8459734: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-074-4198
Turnbuckle

150744198
1B10UNI20190T60-2012A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-006-2619
Asta Speciale

150062619
0-33975: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-232-2962
Supporto Tubazione

152322962
120000665: RNCC: 3 | RNVC: 2
(241)A5009120000665: RNCC: 5 | RNVC: 2
423015E138580: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-055-6776
Staffa Sostegno

150556776
535326: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-115-4164
Resilient Mount

151154164
13154: RNCC: 3 | RNVC: 2
51-613: RNCC: 5 | RNVC: 2

23 Feb 2004

5340-15-150-1078
Barrette Droite

151501078
120015418: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-112-0469
Dispositivo Di Supp

151120469
252A2313-401: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-068-1953
Gruppo Staffaggio

150681953
644636: RNCC: 3 | RNVC: 2
644636: RNCC: 5 | RNVC: 9

27 Feb 1986

5340-15-101-7453
Piastra Forata

151017453
P11: RNCC: 3 | RNVC: 2

4 Feb 1994

5340-15-175-0454
Fixing System

151750454
16219: RNCC: 3 | RNVC: 2

29 Dec 2003

5340-15-213-8532
Cricchetto Pesante

152138532
CRICCHETTO206: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-127-5481
Tassello Elast.Arre

151275481
883137: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-115-8772
Cover

151158772
30725: RNCC: 5 | RNVC: 2
71-32-003-069: RNCC: 5 | RNVC: 2
71-32-003-069: RNCC: 5 | RNVC: 9
30725: RNCC: 5 | RNVC: 9
71-32-003-069: RNCC: 5 | RNVC: 9
30725: RNCC: 5 | RNVC: 9

1 Feb 1993

5340-15-139-7133
Copertura Cabinetta

151397133
A.0511000: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-206-2989
Landing G Body Assy

152062989
GP3860B: RNCC: 3 | RNVC: 2

1 Jun 2012

5340-15-166-5100
Head C Linder

151665100
534300013: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-218-3435
Scovolino Nylon D.

152183435
D30X300: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-141-1199
Tassello Con Vite I

151411199
1906: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-108-3408
Tubular Fairlead Half

151083408
333A0270-001: RNCC: 3 | RNVC: 2

10 Apr 1989

5340-15-115-0193
Coperchio

151150193
06-02-747-6: RNCC: 3 | RNVC: 2

16 Jun 1993

5340-15-154-9325
Dust And Moisture Seal Protective Cap-Plug

151549325
CBD71058G01: RNCC: 3 | RNVC: 2

13 Nov 2001

5340-15-101-4373
Supporto

151014373
3594-44: RNCC: 3 | RNVC: 2
3594-44: RNCC: 5 | RNVC: 9

8 Oct 1987

5340-15-158-5885
Comples Protezione

151585885
122621069: RNCC: 3 | RNVC: 2

9 Mar 2004

5340-15-151-7885
Double Angle Bracket

151517885
0-179570: RNCC: 3 | RNVC: 2

10 Jul 2000

5340-15-007-3722
Fascetta Speciale

150073722
0-33817: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-105-8950
Tirante A Teste Fil

151058950
0-48465: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-158-0490
Speciale Fascetta

151580490
T0005572: RNCC: 3 | RNVC: 2

15 Dec 2003

5340-15-006-2738
Maniglia Speciale

150062738
0-33994: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-119-5441
Sostegno E Supporto

151195441
1R 575443: RNCC: 3 | RNVC: 2
1R 575443: RNCC: 5 | RNVC: 9

21 Mar 1996

5340-15-006-4272
Nut And Bolt Locking Plate

150064272
1391417: RNCC: 3 | RNVC: 2
1391417: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-156-3586
Dust Protective Cap

151563586
(241)A3460CBD71080P01: RNCC: 3 | RNVC: 2
CBD71080P01: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-115-7418
Handwheel

151157418
210301/5: RNCC: 3 | RNVC: 2

2 Sep 1993

5340-15-004-1858
Resilient Mount

150041858
814488: RNCC: 3 | RNVC: 2
814488: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-112-8267
Occhiof

151128267
466721: RNCC: 3 | RNVC: 2
D0466721: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-108-7636
Resilient Mount

151087636
AL60: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-199-4376
Asse

151994376
673479: RNCC: 3 | RNVC: 2
(241)A0866673479: RNCC: 5 | RNVC: 2

4 Apr 2005

5340-15-006-0150
Anchor Strap

150060150
B512TL422: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-139-3657
Collare Fissaggio

151393657
41822729: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-149-8181
Spacing Threaded Standoff

151498181
132212: RNCC: 3 | RNVC: 2
0052514: RNCC: 5 | RNVC: 2

2 Jun 1999

5340-15-009-6392
Canale Cavi Elettri

150096392
201022P1: RNCC: 3 | RNVC: 2

17 Oct 1980

5340-15-002-7095
Molla

150027095
1288: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-122-5798
Resilient Mount

151225798
8636.146: RNCC: 3 | RNVC: 2
8636146: RNCC: 5 | RNVC: 2

10 Sep 1996

5340-15-218-2531
Gancio Pannello For

152182531
B-02: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-198-8172
Shock Mount Pad

151988172
142025324: RNCC: 3 | RNVC: 2

18 Nov 2004

5340-15-074-4222
Turnbuckle

150744222
1C10UNI20190T60-2012A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-157-4213
Nut And Bolt Retainer

151574213
21505703: RNCC: 3 | RNVC: 2

14 Jul 2003

5340-15-101-6701
Dust And Moisture Seal Protective Cap

151016701
0050000: RNCC: 3 | RNVC: 2

27 Oct 1986

5340-15-116-2073
Puntalespeciale

151162073
121103190: RNCC: 3 | RNVC: 2

25 Mar 1993

5340-15-154-1731
Tappo

151541731
PLGA2181010: RNCC: 3 | RNVC: 2

27 Mar 2001

5340-15-148-9208
Tampone Posteriore

151489208
00265: RNCC: 3 | RNVC: 2
(241)A488300265: RNCC: 5 | RNVC: 2

2 Nov 1998

5340-15-121-7352
Clamp

151217352
1576-18-286: RNCC: 3 | RNVC: 2

6 Jul 2000

5340-15-127-4520
Molla Di Comando Fr

151274520
851469: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-156-3705
Assembling Bush

151563705
(241)A3460CBD71332P03: RNCC: 3 | RNVC: 2
CBD71332P03: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-144-8951
Staffa Di Fissaggio

151448951
60005: RNCC: 3 | RNVC: 2
93194667: RNCC: 5 | RNVC: 1
60005: RNCC: 5 | RNVC: 2

10 Feb 1997

5340-15-147-3116
Plate Press

151473116
300465: RNCC: 3 | RNVC: 2

31 Oct 1997

5340-15-153-6564
Posterior Cerniera

151536564
142041136: RNCC: 1 | RNVC: 3

20 Feb 2001

5340-15-175-0286
Handwheel

151750286
B12101-440: RNCC: 3 | RNVC: 2

29 Dec 2003

5340-15-110-3733
Halterung

151103733
F304C3A-24: RNCC: 3 | RNVC: 2
F304C3A-24: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-120-7314
Clamp

151207314
KN1032FSY: RNCC: 3 | RNVC: 2

31 Jul 1995

5340-15-001-6808
Molla

150016808
174063014: RNCC: 3 | RNVC: 2
174063014: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-147-7767
Anello A Gancio

151477767
716A4112-001: RNCC: 3 | RNVC: 2

8 Apr 1998

5340-15-127-3759
Molla

151273759
1357-63-013: RNCC: 3 | RNVC: 2
1357-63-013: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-205-7470
Angle Bracket

152057470
109-0315-73-137: RNCC: 3 | RNVC: 2

29 Mar 2012

5340-15-114-1324
Threaded End Tensioning Tie Rod

151141324
06-2101-012: RNCC: 3 | RNVC: 2
06.2101.012: RNCC: 3 | RNVC: 2

1 Jun 1993

5340-15-149-3199
Riparo Calore Compl

151493199
4886501: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-074-4013
Turnbuckle

150744013
1A20UNI2018A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-108-2785
Handwheel

151082785
SA11951: RNCC: 3 | RNVC: 2

12 Oct 1989

5340-15-128-5452
Molla

151285452
6187: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-198-9687
Cilindro Ammortizza

151989687
21505288: RNCC: 3 | RNVC: 2
(241)A486721505288: RNCC: 5 | RNVC: 2

14 Dec 2004

5340-15-105-6359
Collare Serraggio

151056359
974189: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-115-5447
Coperchietto Cieco

151155447
D0469159: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-204-3296
Telaio

152043296
0000500428465: RNCC: 3 | RNVC: 2
(241)A39630000500428465: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-211-4650
Chiave Meccanica

152114650
EX5340RI4219145: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-156-3888
Seal Extractor Assy

151563888
(241)A3460CBD71349G01: RNCC: 3 | RNVC: 2
CBD71349G01: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-156-2121
Bearing Plate

151562121
(241)A3460CBD71163P15: RNCC: 3 | RNVC: 2
CBD71163P15: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-215-5634
Puntimetallicisicut

152155634
0493G-16: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-231-1788
Tassello

152311788
1314292080: RNCC: 3 | RNVC: 2
534015E099915: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-237-8763
Catenaccio In Ferro

152378763
ADEM 40: RNCC: 3 | RNVC: 2
534015E117665: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-187-5473
Rear Assy

151875473
G0735.0000: RNCC: 3 | RNVC: 2

9 Apr 2009

5340-15-110-3785
Grooved Clamp Coupling

151103785
2221.349: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-111-5870
Extention

151115870
A12184-01-20: RNCC: 3 | RNVC: 2
A12184-01-20: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-156-3682
Mefp Drive Plug

151563682
CBD71330G01: RNCC: 3 | RNVC: 2
(241)A3460CBD71330G01: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-063-2801
Double Angle Bracket

150632801
60108549: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-003-8854
Stand Base

150038854
182709433: RNCC: 3 | RNVC: 2
(241)A0199182709433: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-192-1034
Testarmadio 100 Cp.

151921034
6567313: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-166-4751
Fascetta

151664751
3000515: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-112-4254
Support

151124254
122TE2007-1: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-115-2759
Side Guide

151152759
518052080: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-103-2017
Tappo Per Perno Sos

151032017
DE160.02.059: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-119-7788
Nonmetallic Bumper

151197788
9451418: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-115-6106
Tubo Misura Flangia

151156106
D0471904: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-119-8663
Cap

151198663
TA742: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-195-0114
Protezione Ventola

151950114
22082077F: RNCC: 3 | RNVC: 2
(241)A243722082077F: RNCC: 5 | RNVC: 2

16 Feb 2011

5340-15-175-7730
Serratura Yale Tipo

151757730
520-60: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-116-9763
Nose Assembly

151169763
W018203: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-118-6163
Levier

151186163
9435162: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-152-0148
Double Angle Bracket

151520148
0-153318: RNCC: 3 | RNVC: 2

2 Aug 2000

5340-15-214-3796
Inserto

152143796
C2R1947-1: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-065-3365
Hinge

150653365
P-894879-031: RNCC: 3 | RNVC: 2
P894879-031: RNCC: 5 | RNVC: 2

27 Feb 1985

5340-15-009-2241
Helical Compression Spring Seat

150092241
895-361-660-4: RNCC: 3 | RNVC: 2
8953616604: RNCC: 5 | RNVC: 2
9931515: RNCC: 5 | RNVC: 2

22 Sep 1981

5340-15-163-4665
Door Compass

151634665
825-4021-301: RNCC: 3 | RNVC: 2

24 Sep 2002

5340-15-193-9979
Rh Upper Trolley As

151939979
109-0360-24-108: RNCC: 3 | RNVC: 2

12 Aug 2010

5340-15-143-0134
Rh Upr Support Assy

151430134
109-0702-13-105: RNCC: 3 | RNVC: 2

5 Nov 1996

5340-15-120-5081
Handle

151205081
P-883500-801/802-12C001-512: RNCC: 3 | RNVC: 2
P883500-801/802-12C001-512: RNCC: 5 | RNVC: 2

28 Jun 1995

5340-15-187-6455
Shaft (Rh)

151876455
109-0362-11-104: RNCC: 3 | RNVC: 2
(241)A0126109-0362-11-104: RNCC: 5 | RNVC: 2

15 Apr 2009

5340-15-149-3892
Cover

151493892
1137-16-256: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-15-129-8289
Control Rod

151298289
8527257: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-003-3146
Molla Ad Elica

150033146
721428: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-115-7129
Flangia Tubo Misura

151157129
D1401127: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-15-121-6193
Te Fourche

151216193
80A050398: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-205-1992
Low Pres Protection

152051992
CBD71619G01: RNCC: 3 | RNVC: 2
(241)A3460CBD71619G01: RNCC: 5 | RNVC: 2

24 Feb 2012

5340-15-151-2613
Shock Mount Pad

151512613
00084284: RNCC: 3 | RNVC: 2

4 May 2000

5340-15-074-4410
Turnbuckle

150744410
2A27UNI2021AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-149-3729
Cover

151493729
518-01-1330: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-15-149-6124
Flange

151496124
518-38-1090: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-135-5865
Maniglia

151355865
3065-3: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-131-1536
Handwheel

151311536
25685: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-151-2708
Bracket Rdu 180

151512708
8854126-101: RNCC: 3 | RNVC: 2

4 May 2000

5340-15-116-2581
Piastra Di Montaggi

151162581
SF260-13-41-11: RNCC: 3 | RNVC: 2
SF260-13-41-11: RNCC: 5 | RNVC: 9

31 Mar 1993

5340-15-101-7852
Fascetta Speciale

151017852
SC32676.23: RNCC: 3 | RNVC: 2

21 Jul 1987

5340-15-003-9082
Stand Base

150039082
182741052: RNCC: 3 | RNVC: 2
(241)A0199182741052: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-109-8991
Puntalino Segnalazi

151098991
470157: RNCC: 3 | RNVC: 2
D0470157: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-187-2187
Supporto Munizione

151872187
179201011: RNCC: 3 | RNVC: 2
(241)A0199179201011: RNCC: 5 | RNVC: 2

25 Feb 2009

5340-15-180-5115
Mensola

151805115
195597524: RNCC: 3 | RNVC: 2
(241)A0199195597524: RNCC: 5 | RNVC: 2

10 Jun 2008

5340-15-074-4326
Turnbuckle

150744326
2B8UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-102-6117
Electrical-Me Post

151026117
67496: RNCC: 3 | RNVC: 2
67496F01: RNCC: 5 | RNVC: 2

5 Mar 1993

5340-15-106-9852
Serratura Rimando

151069852
24022: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-136-2151
Cerniera Porta Ante

151362151
7548237: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-231-8322
Tappo

152318322
60115561: RNCC: 3 | RNVC: 2
534015E067430: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-074-4123
Turnbuckle

150744123
2C20UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-231-0330
Barretta Filettata

152310330
M5X160UNI2709: RNCC: 3 | RNVC: 2
534015E151675: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-074-4218
Turnbuckle

150744218
1C27UNI2019A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-198-6842
Semiflangia

151986842
71404311: RNCC: 3 | RNVC: 2
(241)AE19271404311: RNCC: 5 | RNVC: 2
71404311: RNCC: 5 | RNVC: 2

3 Nov 2004

5340-15-068-0807
Handwheel

150680807
32.26.108.0: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-169-5721
Lucchetto Sg

151695721
F72015308: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-166-4888
Pivot

151664888
8X2522UNI171088: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-153-7114
Cerniera (1) A Band

151537114
142021340: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-179-8204
Utility Resilient Mount

151798204
11.024.A: RNCC: 3 | RNVC: 2
SAMA116402.11.024.A: RNCC: 3 | RNVC: 2

3 Aug 2007

5340-15-132-8352
Maniglia Esterna Co

151328352
219VE: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-205-2512
Universal Adjustable Chock

152052512
504356320: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-114-7795
Cover Air Cleaner

151147795
560.2605.034: RNCC: 3 | RNVC: 2

4 Aug 1992

Load More Results