What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 32 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 32 of 72

5340-15-180-8544
Nut And Bolt Retainer

151808544
J57150530-007: RNCC: 3 | RNVC: 2

29 Jul 2008

5340-15-120-4838
Threaded End Tensioning Tie Rod

151204838
142519285: RNCC: 3 | RNVC: 2

9 Jun 1995

5340-15-218-5207
Catenaccio

152185207
CATENACCIO: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-231-0601
Impugnatura Perno D

152310601
SCV001149-2-4: RNCC: 3 | RNVC: 2
534015E119457: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-127-6391
Molla Leva A Mano

151276391
726172: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-151-7555
Fittin Rod Assembly

151517555
J52850400-401: RNCC: 3 | RNVC: 2

5 Jul 2000

5340-15-136-0698
Tappo

151360698
105-214: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-136-8065
Tappo

151368065
MV289: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-136-7592
Inserto

151367592
SA041V: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-101-2919
Strettoio Chiusura

151012919
677625-3/1: RNCC: 3 | RNVC: 2

28 Jul 1986

5340-15-074-4337
Turnbuckle

150744337
2B45UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-112-8219
Foderapera

151128219
465508: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-182-9178
Serie Chiavi Numera

151829178
COMM534015C013944: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-103-0747
Dust And Moisture Seal Protective Cap-Plug

151030747
DE004.01.524: RNCC: 3 | RNVC: 2
(241)A5015DE004.01.524: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-051-4072
Staffa

150514072
4556448: RNCC: 3 | RNVC: 2
4556448: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-221-6974
Chiave Elettronica

152216974
5340RI0992245: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-203-0503
Supporto+Leve

152030503
033090270: RNCC: 3 | RNVC: 2
(241)A5009033090270: RNCC: 5 | RNVC: 2

19 Nov 2007

5340-15-074-4234
Turnbuckle

150744234
2C10UNI20190T60-2012AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-115-6087
Scatola Coperchio

151156087
D0468445: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-104-8876
Fissaggio Gaffetta

151048876
8818133: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-159-9749
Rubber Bumper

151599749
1M01704003: RNCC: 3 | RNVC: 2

19 Apr 2004

5340-15-116-0288
Lamina Motore

151160288
33002025B: RNCC: 3 | RNVC: 2

26 Oct 1998

5340-15-115-6108
Speciale Maniglia

151156108
D0471826: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-159-4724
Padlock

151594724
PN UAS 00000647: RNCC: 3 | RNVC: 2
9999Z90000109: RNCC: 5 | RNVC: 9

31 Mar 2004

5340-15-215-0475
Gancio Fermaporta

152150475
FERMAPORTA: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-103-1915
Complessiv Raccordo

151031915
DE013.12.996: RNCC: 3 | RNVC: 2
(241)A5015DE013.12.996: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-193-5338
Spec Rullo Sferico

151935338
K940-12-47-33: RNCC: 3 | RNVC: 2
(241)A2142K940-12-47-33: RNCC: 5 | RNVC: 2

28 May 2010

5340-15-122-4058
Pattino Di Metallo

151224058
D1404967: RNCC: 3 | RNVC: 2

27 Jun 2000

5340-15-201-9105
Resilient Mount

152019105
D1427774: RNCC: 3 | RNVC: 2
WTP805600177: RNCC: 5 | RNVC: 2

11 Jan 2007

5340-15-120-1014
Resilient Mount

151201014
D0470968: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-15-194-3436
Universal Adjustable Chock

151943436
311773F01: RNCC: 3 | RNVC: 2

4 Nov 2010

5340-15-059-2076
Dispositivo A Molla

150592076
330-0187-01: RNCC: 3 | RNVC: 2

19 Jun 1974

5340-15-100-8080
Porta Guarnizione

151008080
109-0406-16-3: RNCC: 3 | RNVC: 2

27 Oct 1986

5340-15-100-1005
Supporto Angolare S

151001005
P-852528-001: RNCC: 3 | RNVC: 2
P852528-001: RNCC: 5 | RNVC: 2

10 Sep 1986

5340-15-119-7553
Top Cover

151197553
294238-A2: RNCC: 3 | RNVC: 2
294238-A2: RNCC: 5 | RNVC: 2
294238-A2: RNCC: 5 | RNVC: 9

17 Nov 1994

5340-15-216-8261
Tassello In Acciaio

152168261
0415: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-111-4197

5340-15-108-6211
Control Rod

151086211
60141837: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-136-5562
Supporto Ammortizza

151365562
MV72RF06: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-162-6531
Tie Rod Assy

151626531
205-8130-39-1: RNCC: 3 | RNVC: 2

7 Dec 2001

5340-15-162-9767
Line

151629767
60122709: RNCC: 3 | RNVC: 2

9 Apr 2002

5340-15-153-1614
Anello

151531614
W029412: RNCC: 3 | RNVC: 2

7 Dec 2000

5340-15-231-6709
Cerniera

152316709
2.7.2187: RNCC: 3 | RNVC: 2
534015E095007: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-152-8119
Fascetta

151528119
P110514: RNCC: 3 | RNVC: 2

27 Oct 2000

5340-15-119-7404
Link

151197404
01TL23256: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-116-9732
Harness

151169732
W005144: RNCC: 3 | RNVC: 2
(7001)5340151169732: RNCC: 5 | RNVC: 2

18 Nov 1997

5340-15-118-2836
Cilindretto Portagu

151182836
D0484921: RNCC: 3 | RNVC: 2

20 Apr 1995

5340-15-203-4533
Hoisting Bracket

152034533
N632U1006201: RNCC: 3 | RNVC: 2

4 Feb 2008

5340-15-147-5457
Foot

151475457
A-C128454-1/2-11: RNCC: 3 | RNVC: 2

30 Dec 1997

5340-15-200-4426
Antivibrante

152004426
5387.SI-2021: RNCC: 3 | RNVC: 2
2021: RNCC: 3 | RNVC: 2
(241)A53875387.SI-2021: RNCC: 5 | RNVC: 2

22 Jan 2006

5340-15-113-9703
Manigliadisicurezza

151139703
262A1248-001: RNCC: 3 | RNVC: 2

31 Mar 1992

5340-15-103-0776
Shock Mount Pad

151030776
DE013.13.420: RNCC: 3 | RNVC: 2
(241)A5015DE013.13.420: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-192-6419

5340-15-188-2724
Dust And Moisture Seal Protective Cap

151882724
TAMN12BLACK: RNCC: 3 | RNVC: 2
TFA34: RNCC: 3 | RNVC: 2
70-80-457: RNCC: 5 | RNVC: 2

1 Sep 2009

5340-15-112-8504
Headless Grooved Rod

151128504
471907: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-058-5654
Key Blank

150585654
NP19N: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-127-4259
Molla Tirante Elas.

151274259
849036: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-136-5417
Semicerniera

151365417
212-060-804-79: RNCC: 3 | RNVC: 2

13 Oct 1998

5340-15-205-1393
Escutcheon Plate

152051393
1386160Z01: RNCC: 3 | RNVC: 2
(241)AB5551386160Z01: RNCC: 5 | RNVC: 2

21 Feb 2012

5340-15-111-9248
Helical Compression Spring Seat

151119248
13003822: RNCC: 3 | RNVC: 2
9985017: RNCC: 5 | RNVC: 2

10 Sep 1989

5340-15-111-5677
Segment Ring

151115677
01TC20648-01: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-232-9225
Impugnatura Manovel

152329225
3920-10003: RNCC: 3 | RNVC: 2
534015E119321: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-148-7419
Access Cover

151487419
0M08157000: RNCC: 3 | RNVC: 2

28 Sep 1998

5340-15-221-6976
Padlock

152216976
5340RI0992380: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-127-3641
Molla Richiamo Leva

151273641
832620: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-166-5224
Flange

151665224
133987: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-074-4270
Turnbuckle

150744270
1A39UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-056-0848
Handwheel

150560848
1276-05-666: RNCC: 3 | RNVC: 2
127605666: RNCC: 5 | RNVC: 2

31 Dec 1975

5340-15-122-1399
Covering Sa

151221399
A39515-001: RNCC: 3 | RNVC: 2
A-39515-001: RNCC: 3 | RNVC: 2

21 May 1996

5340-15-149-3334
Coperchio Ruota Vei

151493334
60144331: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-166-5013
Lh Hinge Half

151665013
113A6031751: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-152-2597
Pad Eye

151522597
99101064: RNCC: 3 | RNVC: 2

17 Aug 2000

5340-15-105-6292
Collare Serraggio

151056292
2105481: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-118-2830
Cilindretto Portagu

151182830
D0477213: RNCC: 3 | RNVC: 2

20 Apr 1995

5340-15-122-9231
Inserto

151229231
SLS196F1032-08: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-155-1765
Dust And Moisture Seal Protective Plug

151551765
X0037: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-15-195-8561
Manual Control Lever

151958561
A9063740640: RNCC: 3 | RNVC: 2
(241)AJ611A9063740640: RNCC: 5 | RNVC: 2

23 May 2011

5340-15-110-5742
Helical Compression Spring Seat

151105742
525771: RNCC: 2 | RNVC: 2
1P 525771: RNCC: 3 | RNVC: 2
525771: RNCC: 5 | RNVC: 9
1P 525771: RNCC: 5 | RNVC: 9

12 Oct 1996

5340-15-071-7483
Bell Crank

150717483
115171G2: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-115-6942
Control Rod

151156942
D1401489: RNCC: 3 | RNVC: 2

8 Mar 1994

5340-15-187-5249
Spacing Threaded Standoff

151875249
3-B5365.0203//C: RNCC: 3 | RNVC: 2

9 Apr 2009

5340-15-117-1633
Corrosion Preventive Anode

151171633
DPR 29216-41: RNCC: 3 | RNVC: 2

12 Jan 1994

5340-15-166-4962
Staffa Di Reazione

151664962
4023810: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-117-9166
Forcella Assieme

151179166
433A1303-403: RNCC: 3 | RNVC: 2

31 Jan 1994

5340-15-058-7500
Scodellino Molla

150587500
90-6400-28: RNCC: 3 | RNVC: 2

3 May 1974

5340-15-209-3133
Serratura Infilare

152093133
52611-50: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-002-6282
Stand Base

150026282
182701014: RNCC: 3 | RNVC: 2

11 Sep 2013

5340-15-121-6538
Protection Amortiss

151216538
800050316: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-176-3661
Fascetta Con Testa

151763661
FT500DWC: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-122-2806
Anchor Strap

151222806
800057165: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-102-6101
Helical Compression Spring Retainer

151026101
69177: RNCC: 3 | RNVC: 2
69177F01: RNCC: 3 | RNVC: 2

5 Mar 1993

5340-15-210-9532
Fascetta Serracavo

152109532
4/11665: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-055-6809
Staffetta

150556809
42267: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-127-2305
Molla

151272305
880751: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-074-3665
Turnbuckle

150743665
2D6UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-127-0858
Staffa Completa

151270858
373678: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-215-4649
Fascetta 10X30

152154649
10X30: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-008-0208
Sostegno Compl

150080208
109-0310-32-1: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-170-3224
Pressur Intensifier

151703224
GM2-5007H+D40: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-177-6070
Manual Control Handle

151776070
I150-25M5: RNCC: 3 | RNVC: 2

13 May 2004

5340-15-207-0800

5340-15-156-3689
Hp Speed Probe Plug

151563689
(241)A3460CBD71337G01: RNCC: 3 | RNVC: 2
CBD71337G01: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-174-7445
Quadro 8X15 Cr Ni 1

151747445
51260-21/013: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-059-4359
Control Rod

150594359
109-0011-34-1: RNCC: 3 | RNVC: 2

4 Jan 1976

5340-15-170-3711
Plate

151703711
206-061-735-1: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-118-6032
Handle

151186032
P-883500-801/802-12C001-609: RNCC: 3 | RNVC: 2
P883500-801/802-12C001-609: RNCC: 5 | RNVC: 2

1 Jul 1994

5340-15-157-9225
Barra Di Collegamen

151579225
0-163412: RNCC: 3 | RNVC: 2
(241)A39630-163412: RNCC: 5 | RNVC: 2
1PA39630-163412: RNCC: 5 | RNVC: 2

24 Nov 2003

5340-15-205-2310
Kit Ruote Per Armad

152052310
I-CASE CASTOR/T: RNCC: 3 | RNVC: 2
(241)AD830I-CASECASTOR/T: RNCC: 5 | RNVC: 2

28 Feb 2012

5340-15-203-0303
Tassello

152030303
0-957924: RNCC: 3 | RNVC: 2
(241)A39630-957924: RNCC: 5 | RNVC: 2

19 Nov 2007

5340-15-111-5674
Assy Crank

151115674
01TC20741: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-195-9285
Bocchettone Di Rifo

151959285
346B0300A1852.801: RNCC: 3 | RNVC: 2
(241)A2142346B0300A1852.801: RNCC: 5 | RNVC: 2

27 May 2011

5340-15-115-3402
Shroud

151153402
740-2569-039: RNCC: 3 | RNVC: 2
82-01507: RNCC: 5 | RNVC: 2

29 Nov 1992

5340-15-174-7495
Lamiera 1 Piaimg3

151747495
54420-07/017: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-147-5797
T-Fitting

151475797
98RV730: RNCC: 3 | RNVC: 2

30 Dec 1997

5340-15-179-1443
Tappo Otturatore

151791443
16988301: RNCC: 3 | RNVC: 2
(241)A424916988301: RNCC: 5 | RNVC: 2

13 Jun 2006

5340-15-151-9593
Spalla Carrello

151519593
0-161444: RNCC: 3 | RNVC: 2
00161444: RNCC: 3 | RNVC: 2
(241)A39630-161444: RNCC: 5 | RNVC: 2

27 Jul 2000

5340-15-199-5848
Anodo

151995848
2C-A/280/5/1-A: RNCC: 3 | RNVC: 2
(241)A31702C-A/280/5/1-A: RNCC: 5 | RNVC: 2

4 May 2005

5340-15-100-7616
Semifascetta

151007616
109-0020-79-3: RNCC: 3 | RNVC: 2

24 Nov 1986

5340-15-199-3136
Semicerniera

151993136
212-4600-12-3: RNCC: 3 | RNVC: 2
(241)A0126212-4600-12-3: RNCC: 3 | RNVC: 2

28 Feb 2005

5340-15-218-6663
Handwheel

152186663
6.321-054.0: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-205-2631
Dust And Moisture Seal Protective Cover

152052631
D1-27024-001: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-107-4436
Helical Compression Spring Seat

151074436
1P 532484: RNCC: 3 | RNVC: 2
1P 532484: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-020-2516
Molla A Lamina

150202516
01-097-01-14: RNCC: 3 | RNVC: 2
55.49.011.A: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-001-8717
Fascetta In Gomma

150018717
504327: RNCC: 3 | RNVC: 2

18 Jul 2013

5340-15-142-9771
Serie Zinchi

151429771
196930: RNCC: 2 | RNVC: 3
820063300.2: RNCC: 3 | RNVC: 2
196930: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-220-0670
Telaio Porta U 200

152200670
S1-142C: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-127-5035
Anello Elastico Di

151275035
866614: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-112-4249
Plate

151124249
122TE2002-1: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-112-8508
Ritegno

151128508
471824: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-103-2022
Chiavistello Di Chi

151032022
DE160.02.087: RNCC: 3 | RNVC: 2
(241)A5015DE160.02.087: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-105-6053
Snap Hook

151056053
2/20328-09.03.74-09: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-136-7815
Smorzatore Vibrazio

151367815
214-076-153-1: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-230-5259
Bracket

152305259
CV69955: RNCC: 3 | RNVC: 2
534015E152147: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-213-7387
Kit Elettroserratur

152137387
ELETTROSERRATURA: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-155-3156
Resilient Mount

151553156
60188934: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-15-178-2748
Adhes Rubber Foot

151782748
37-16150-00: RNCC: 3 | RNVC: 2

29 Apr 2005

5340-15-041-2394
Forcella

150412394
1-7053-101-34772: RNCC: 3 | RNVC: 2
1-7053-1-01-34772: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-152-3814
Collare

151523814
00108899: RNCC: 3 | RNVC: 2
0-108899: RNCC: 3 | RNVC: 2
(241)A39630-108899: RNCC: 5 | RNVC: 2

6 Sep 2000

5340-15-206-5480
Anello Di Spallamen

152065480
04-09-1367-14-C: RNCC: 3 | RNVC: 2
(241)A098404-09-1367-14-C: RNCC: 5 | RNVC: 2

25 Jun 2012

5340-15-114-8248
Kitviteria

151148248
188-2001/01: RNCC: 3 | RNVC: 2

12 Aug 1992

5340-15-138-6555
Staffa Sostegno Cen

151386555
2909-6: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-217-4715
Ruote Orientabili P

152174715
433-7299: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-061-5579
Access Cover Plate

150615579
000200223250: RNCC: 5 | RNVC: 2
000200223250: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-170-4870
Handle

151704870
14828-202: RNCC: 3 | RNVC: 2

3 Mar 2003

5340-15-178-6101
Support Block

151786101
76031517: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-174-6578
Non Drive End Brack

151746578
6102204136: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-15-116-8528
Coperchio Posterior

151168528
D0469843: RNCC: 3 | RNVC: 2

6 Apr 1994

5340-15-137-3168
Serratzura Completa

151373168
S6121-62753-4: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-188-0047
Half Hinge

151880047
A-082571-005: RNCC: 3 | RNVC: 2

16 Jun 2009

5340-15-065-7132
Piastrina Speciale

150657132
206-5501-24-7: RNCC: 3 | RNVC: 2

26 Jun 1985

5340-15-151-5401
Piastra

151515401
0-119148: RNCC: 3 | RNVC: 2
(241)A39630-119148: RNCC: 5 | RNVC: 2

6 Jun 2000

5340-15-113-9695
Supportovalvolacomp

151139695
252A3079-001: RNCC: 3 | RNVC: 2

31 Mar 1992

5340-15-170-6157
Manual Control Handle

151706157
VKIC50REP2: RNCC: 3 | RNVC: 2
CAE00422: RNCC: 5 | RNVC: 2

2 Apr 2003

5340-15-114-9335
Snap Hook

151149335
2.052.4: RNCC: 3 | RNVC: 2

24 Sep 1992

5340-15-112-1356
Schermo

151121356
DE013.16.400: RNCC: 3 | RNVC: 2
(241)A5015DE013.16.400: RNCC: 5 | RNVC: 2

12 Feb 1991

5340-15-206-8870
Flip Up

152068870
FLIP339CL2: RNCC: 3 | RNVC: 2
(241)AD091FLIP339CL2: RNCC: 5 | RNVC: 2

24 Jul 2012

5340-15-209-4437
Staffa Per Fissaggi

152094437
41068: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-068-2312
Anchor Strap

150682312
W011890: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-074-4035
Turnbuckle

150744035
2A20UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-041-1347
Fascetta Per Fissag

150411347
SN97: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-201-8845
Tiranti Per Fanali

152018845
55MM6T: RNCC: 3 | RNVC: 2
(241)A380455MM6T: RNCC: 5 | RNVC: 2

7 Jan 2007

5340-15-136-1813
Tappo

151361813
2210582: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-212-1877
Stop Con Occhielo

152121877
SLM6: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-119-2429
Piastrina Bloccaggi

151192429
204-8929-34-3: RNCC: 3 | RNVC: 2

29 Mar 1996

5340-15-121-3311
Double Angle Bracket

151213311
463-061900.001: RNCC: 3 | RNVC: 2

7 Nov 1995

5340-15-149-3782
Bracket

151493782
518-08-1120: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-15-113-1733
Fermopertappo

151131733
253A1131-001: RNCC: 3 | RNVC: 2

7 Oct 1990

5340-15-121-9201
Double Angle Bracket

151219201
98457736: RNCC: 3 | RNVC: 2

29 Mar 1996

5340-15-115-2749
Ruota Dentata A Cri

151152749
518051870: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-001-7936
Bumper

150017936
5949790841: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-150-6359
Sp Assieme Ritegno

151506359
39725-001: RNCC: 5 | RNVC: 2
39725-001: RNCC: 5 | RNVC: 9

15 Dec 1999

5340-15-009-4606
Articoli Vari

150094606
NP17TIP0P: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-115-5457
Sede Sferica Antifr

151155457
D0471704: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-218-3603
Fischer Ad Ancora

152183603
01462: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-006-3038
Plate Locki

150063038
P-180060-001: RNCC: 3 | RNVC: 2
P180060-001: RNCC: 5 | RNVC: 2

24 Nov 1979

5340-15-125-5835
Fascetta

151255835
SS7551-24: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-107-9851
Bush

151079851
141-1227/13: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-153-7780
Cappuccio Di Protez

151537780
10400A135850: RNCC: 5 | RNVC: 2
10400A135850: RNCC: 5 | RNVC: 9

28 Feb 2001

5340-15-113-3582
Dust And Moisture Seal Protective Plug

151133582
79050328: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-221-7842
Tassello Di Legno I

152217842
TASSELLOLEGNOMM8: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-105-5991
Staffa A Gomito

151055991
9913255: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-219-7063
Squadrette 160X60

152197063
160X60: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-221-6978
Catena Zincata

152216978
5340RI0992687: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-115-7059
Coperchio

151157059
D0471019: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-163-2383
Cap

151632383
8006339: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-001-6397
Molla

150016397
141326045: RNCC: 3 | RNVC: 2
141326045: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-154-1152
Staffa

151541152
0-171058: RNCC: 3 | RNVC: 2
(241)A39630-171058: RNCC: 5 | RNVC: 2
1PA39630-171058: RNCC: 5 | RNVC: 2

22 Mar 2001

5340-15-219-9111
Tassello Ad Espan.T

152199111
HDR1160088: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-180-0770
Threaded End Tensioning Tie Rod

151800770
1R 612360: RNCC: 3 | RNVC: 2

28 Jan 2008

5340-15-209-6851
Supporti Per Estint

152096851
E.SUP160.V: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-105-8938
Tirante A Teste Fil

151058938
0-48466: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-219-9520
Contropiastra Per S

152199520
CONTROPIASTRA: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-007-0930
Fascetta Speciale

150070930
0-02792: RNCC: 3 | RNVC: 2

29 Jun 1979

5340-15-061-0681
Helical Compression Spring Seat

150610681
2316-7: RNCC: 3 | RNVC: 2

31 Aug 1977

5340-15-009-8543
Anello Di Rasamento

150098543
0-29109: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-149-7115
Anchor Strap

151497115
800067434: RNCC: 3 | RNVC: 2

7 May 1999

5340-15-168-9364
Padlock

151689364
F72000772: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-134-5490
Piastrina

151345490
4141452: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-175-5083
Gancio A Molla Mis.

151755083
557V-2: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-064-7010
Bracket

150647010
A-125112-004: RNCC: 3 | RNVC: 2
A125112-004: RNCC: 5 | RNVC: 2

10 Jun 1984

5340-15-154-1324
Tappo Di Protezione

151541324
42103388: RNCC: 3 | RNVC: 2
(241)A39630-115098: RNCC: 5 | RNVC: 2
1PA39630-115098: RNCC: 5 | RNVC: 2
0-115098: RNCC: 5 | RNVC: 2

22 Mar 2001

5340-15-202-3025
Corrosion Preventive Anode

152023025
ST17-306 B2 (200X50X30): RNCC: 2 | RNVC: 2
ZINCO TIPO B2 (200X50X30): RNCC: 3 | RNVC: 2

20 Feb 2007

5340-15-002-1704
Dust And Moisture Seal Protective Cap

150021704
42567740: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-217-6895
Martello Tondo Gr30

152176895
99051: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-115-6861
Piston Connecting Rod

151156861
D1401111: RNCC: 3 | RNVC: 2

7 Mar 1994

5340-15-114-7307
Flangia

151147307
D0491083: RNCC: 3 | RNVC: 2

30 Jul 1992

5340-15-152-7315
Telaio F 40 T

151527315
441: RNCC: 3 | RNVC: 2
(241)A3334441: RNCC: 4 | RNVC: 1
541T: RNCC: 5 | RNVC: 2

19 Oct 2000

5340-15-136-9195
Anello

151369195
61-630-070-1: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-045-3921
Fascetta

150453921
N0R4-110-10-3: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-141-4841
Antivibrante

151414841
VZA-D-AV300: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-103-0993
Electrical-Me Post

151030993
DE160.02.079: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-147-0025
Tacchetto Di Guida

151470025
HF055: RNCC: 3 | RNVC: 2

4 Sep 1997

5340-15-156-9303
Elemento Di Comando

151569303
60196460: RNCC: 3 | RNVC: 2

11 Mar 2003

5340-15-003-0384
Stand Base

150030384
182771011: RNCC: 3 | RNVC: 2
(241)A0199182771011: RNCC: 5 | RNVC: 2

25 Oct 2013

5340-15-104-4322
Testa Tira Forcella

151044322
4-586: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-121-3976
Supporto Per Pulegg

151213976
129-0011-18-103: RNCC: 3 | RNVC: 2

11 Dec 1995

5340-15-068-5319
Blocco Angolo

150685319
SH 3466-001: RNCC: 3 | RNVC: 2

9 Oct 1986

5340-15-212-7657
Supporto

152127657
454-0102: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-119-7576
Strip

151197576
278196-G1: RNCC: 3 | RNVC: 2
278196-G1: RNCC: 5 | RNVC: 2
278196-G1: RNCC: 5 | RNVC: 9

17 Nov 1994

5340-15-193-2420
Piastra Di Montaggi

151932420
504188628: RNCC: 3 | RNVC: 2
(241)A4249504188628: RNCC: 5 | RNVC: 2

22 Apr 2010

5340-15-122-1398
Strip Retai

151221398
A39517-001: RNCC: 3 | RNVC: 2
A-39517-001: RNCC: 3 | RNVC: 2

21 May 1996

5340-15-150-2576
Riduzione Metallica

151502576
26-6-21-25D: RNCC: 3 | RNVC: 2

8 Sep 1999

5340-15-193-5744
Ruota Per Cancello

151935744
RUOTAXCANCELLO120/140: RNCC: 3 | RNVC: 2
(241)AD445RUOTAXCANCELLO120/140: RNCC: 5 | RNVC: 2

15 Jun 2010

5340-15-155-4355
Tongue

151554355
UNI7510-A 8X5X70: RNCC: 3 | RNVC: 2

25 Mar 2002

5340-15-005-4053
Cover Plate Access

150054053
1137-20-111: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-108-6689
Dust And Moisture Seal Protective Cap

151086689
736424-10: RNCC: 3 | RNVC: 2
736424-10: RNCC: 5 | RNVC: 9

10 Jul 1987

5340-15-127-1024
Squadretta Anterior

151271024
398423: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-054-3245
Piastrina Ritegno

150543245
523160: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-009-1690
Seat Pipe Support

150091690
1372919: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-065-3366
Hinge

150653366
P-894874-037: RNCC: 3 | RNVC: 2
P894874-037: RNCC: 5 | RNVC: 2

27 Feb 1985

5340-15-205-4950
Dust And Moisture Seal Protective Cap-Plug

152054950
182705234: RNCC: 3 | RNVC: 2
(241)A0199182705234: RNCC: 5 | RNVC: 2

14 Mar 2012

5340-15-155-6327
Spe Protezione Emi

151556327
587003118200: RNCC: 2 | RNVC: 3

6 May 2002

5340-15-148-7126
Cerniera A Volonta'

151487126
109-0301-27-118: RNCC: 3 | RNVC: 2

28 Sep 1998

5340-15-141-8833
Semicerniera

151418833
212-1115-16-3: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-137-0148
Tappo

151370148
47-631-145-1: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-116-8968
Helical Compression Spring Retainer

151168968
DPR24066/1-19: RNCC: 3 | RNVC: 2

18 Nov 1993

5340-15-006-2720
Piastra Speciale

150062720
0-33945: RNCC: 3 | RNVC: 2
1PA39630-33945: RNCC: 5 | RNVC: 2

10 Apr 1979

5340-15-154-2089
Double Angle Bracket

151542089
0-169076: RNCC: 3 | RNVC: 2
1PA39630-169076: RNCC: 5 | RNVC: 2
(241)A39630-169076: RNCC: 5 | RNVC: 2

28 Mar 2001

5340-15-120-6885
Coperchio Portamoll

151206885
D0471298: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-147-2821
Pomolo

151472821
F3553: RNCC: 3 | RNVC: 2

31 Jul 2000

5340-15-112-8134
Puntalino

151128134
D0468421: RNCC: 3 | RNVC: 2
468421: RNCC: 3 | RNVC: 2

4 Feb 1993

5340-15-137-4314
Distanziale

151374314
A67890: RNCC: 3 | RNVC: 2
A67890: RNCC: 5 | RNVC: 9

9 Oct 1996

5340-15-002-1661
Manual Control Lever

150021661
42567101: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-211-0358
Sensore Doppia Tecn

152110358
DG1035: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-196-9908
Padlock

151969908
PN UAS 00034319: RNCC: 3 | RNVC: 2
5340F76030053: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-138-5120
Tassello

151385120
7538271: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-116-5895
Cerniera Completa D

151165895
117A1110-402: RNCC: 3 | RNVC: 2

2 Jun 1993

5340-15-006-2344
Fascetta Speciale

150062344
0-34088: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-120-8460
P Door Stay

151208460
K60.9906092: RNCC: 3 | RNVC: 2

4 Sep 1995

5340-15-120-6758
Forcella Angolata P

151206758
D1402637: RNCC: 3 | RNVC: 2

10 Jul 1996

5340-15-120-6849
Piastra Anteriore S

151206849
D0484711: RNCC: 3 | RNVC: 2

1 May 1996

5340-15-183-4954
Lucchetti Di Sicure

151834954
COMM631020060003: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-213-5146
Ruota Ottone Per Ca

152135146
RUOTAMM120: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-102-3035
Lock Washer

151023035
466500: RNCC: 3 | RNVC: 2

11 Jul 1996

5340-15-118-1186
Control Rod

151181186
1Q 576740: RNCC: 3 | RNVC: 2
1Q 576740: RNCC: 5 | RNVC: 9

22 Mar 1996

5340-15-118-6724
Pivot Axle

151186724
75111: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-206-5861
Gancio Doccia Croma

152065861
02526: RNCC: 3 | RNVC: 2
(241)AD44502526: RNCC: 5 | RNVC: 2

26 Jun 2012

5340-15-127-4151
Tampone

151274151
1413-90-006: RNCC: 3 | RNVC: 2
1413-90-006: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-236-0998
Arridatoio In Accia

152360998
183-5958: RNCC: 3 | RNVC: 2
534015E142101: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-066-2679
Padlock

150662679
91040020: RNCC: 5 | RNVC: 2
301/30 C.A.: RNCC: 5 | RNVC: 2

29 Oct 1982

5340-15-158-4378
Line Supporting Strap

151584378
28314-001: RNCC: 3 | RNVC: 2

15 Feb 2004

5340-15-117-9367
Blocchetto Di Fermo

151179367
142520166: RNCC: 3 | RNVC: 2

8 Feb 1994

5340-15-200-4893
Tappo Plastica

152004893
N967G7120201: RNCC: 3 | RNVC: 2
(241)A0126N967G7120201: RNCC: 5 | RNVC: 2

25 Jan 2006

5340-15-089-7692
Dust And Moisture Seal Protective Cap

150897692
A64200: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-121-7305
Clamp Assy

151217305
MBEU90780: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-103-4250
Stop Ring

151034250
276983ART5: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-103-2090
Lamiera Volano

151032090
L5066103: RNCC: 3 | RNVC: 2
(241)A5015DE160.03.197: RNCC: 5 | RNVC: 2
DE160.03.197: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-189-5354
Fascetta

151895354
STSTG001-32-17: RNCC: 3 | RNVC: 2

26 Feb 2010

5340-15-178-5308
Dust And Moisture Seal Protective Cap-Plug

151785308
357-09: RNCC: 3 | RNVC: 2
357-09: RNCC: 5 | RNVC: 9

1 Jul 2005

5340-15-170-7637
Bracket

151707637
340-0170/01: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-149-3718
Plate

151493718
518-31-1150: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-15-141-1639
Supporto Ro-Carrina

151411639
222/60: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-155-4827
Manual Control Lever

151554827
CBD71280P07: RNCC: 3 | RNVC: 2

27 Mar 2002

5340-15-110-2768
Handwheel

151102768
543/5/58: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-074-4278
Turnbuckle

150744278
1A6UNI20200T60-2012A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-112-8238
Supportoa

151128238
466544: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-115-7134
Flangiatubomisurasu

151157134
D1406519: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-15-204-3236
Tampone Gomma

152043236
0000500429838: RNCC: 3 | RNVC: 2
(241)A39630000500429838: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-115-3098
Eqpt Rack Mechanica

151153098
100-0311/01: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-003-4787
Tassello Elastico

150034787
970371: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-068-8714
Fermo

150688714
205-8810-07-1: RNCC: 3 | RNVC: 2

9 Dec 1985

5340-15-206-5928
Utility Resilient Mount

152065928
Y23-PWEN30.0320: RNCC: 3 | RNVC: 2
(241)A4929Y23-PWEN30.0320: RNCC: 5 | RNVC: 2

26 Jun 2012

5340-15-074-4160
Turnbuckle

150744160
2D6UNI20180T60-2012AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-180-5320
Seal Retainin Plate

151805320
129-0640-50-221: RNCC: 3 | RNVC: 2
(241)A0126129-0640-50-221: RNCC: 5 | RNVC: 2

16 Jun 2008

5340-15-195-9157
Angle Bracket

151959157
J04841652-001: RNCC: 3 | RNVC: 2
(241)A0019J04841652-001: RNCC: 5 | RNVC: 2

25 May 2011

5340-15-045-3637
Fascetta

150453637
753-12-22: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-209-0190
Insert

152090190
756-3957-002: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-157-4455
Handwheel

151574455
13HJ04143206S01-405-010: RNCC: 3 | RNVC: 2

17 Jul 2003

5340-15-220-5921
Confez. Paracolpi -

152205921
PARACOLPI-SPINA: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-122-6481
Basetta

151226481
315482G1: RNCC: 3 | RNVC: 2

27 Sep 1996

5340-15-195-7730
Turnbuckle

151957730
412-4600-13-101: RNCC: 3 | RNVC: 2

9 May 2011

5340-15-101-7461
Piastra Non Forata

151017461
500X150X20DIS44125: RNCC: 3 | RNVC: 2

9 Oct 1986

5340-15-185-3405
Rotolo 255 Mm115x50

151853405
1034400: RNCC: 3 | RNVC: 2
103-4400: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-174-7475
Piatto 20X5 Peaisi1

151747475
54130-01/091: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-119-8200
Coperchietto Testat

151198200
480017: RNCC: 3 | RNVC: 2
D0480017: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-006-7639
Plug Sealt

150067639
70845710: RNCC: 3 | RNVC: 2
70845710: RNCC: 5 | RNVC: 9

24 Nov 1979

5340-15-171-5635
Confezione Fascette

151715635
CONFEZIONE FASCETTE IN FERRO MIN: RNCC: 1 | RNVC: 2

1 Jun 2003

5340-15-106-4412
Proiettore Molletta

151064412
9900911: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-213-8852
Cilindro Da Infilar

152138852
8300-30-30: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-127-5486
Anello Pass.Com.Fle

151275486
883418: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-106-4419
Proiettore Molletta

151064419
00.180.390: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-190-6460
Coperchio

151906460
56C22972-5: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-221-0919
Arganello A Fune

152210919
TIPO501: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-112-2666
Helical Compression Spring Seat

151122666
773144: RNCC: 3 | RNVC: 2

30 Apr 1988

5340-15-179-7016
Double Angle Bracket

151797016
0000500401177: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-059-8098
Rotolo Nastro Fasce

150598098
616010120: RNCC: 3 | RNVC: 2

26 Jun 1976

5340-15-149-4022
Handle

151494022
2300-93023: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-15-149-3440
Riparo Per Ammortiz

151493440
60169284: RNCC: 3 | RNVC: 2

2 Feb 1999

5340-15-203-7200
Cap

152037200
58100345: RNCC: 3 | RNVC: 2

27 Jun 2011

5340-15-178-9992
Cap

151789992
RS 408 495: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-119-2441
Fermo Sedile

151192441
212-7600-35-3: RNCC: 3 | RNVC: 2

31 May 1995

5340-15-158-5849
Speciale Angolare

151585849
122607294: RNCC: 3 | RNVC: 2

9 Mar 2004

5340-15-213-4276
Avvolgitore Standar

152134276
AVVOLGITOREMT12: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-193-9444
Nonmetallic Cup

151939444
109-0618-41-101: RNCC: 3 | RNVC: 2

2 Aug 2010

5340-15-115-3095
Eqpt Rack Guides Se

151153095
100-0314/01: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-142-9604
Handwheel

151429604
700-028: RNCC: 3 | RNVC: 2
740-100-028: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-163-1178
Support

151631178
7302045: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-175-8752
Cerniera

151758752
020814393: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-105-6051
Snap Hook

151056051
2/20538-20.03.48-07: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-103-1088
Piattello

151031088
L6400024: RNCC: 3 | RNVC: 2
(241)A5015DE160.03.373: RNCC: 5 | RNVC: 2
DE160.03.373: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-230-5193
Impugnatura Bacheli

152305193
IR 302-80 BACHELITE: RNCC: 3 | RNVC: 2
534015E099238: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-151-7883
Tirante

151517883
0-110577: RNCC: 3 | RNVC: 2
1PA39630-110577: RNCC: 5 | RNVC: 2
(241)A39630-110577: RNCC: 5 | RNVC: 2

10 Jul 2000

5340-15-117-7283
Control Rod

151177283
142503121: RNCC: 3 | RNVC: 2

13 Jan 1994

5340-15-113-2426
Staffacomplessivo

151132426
275A0711-407: RNCC: 3 | RNVC: 2

11 Apr 1991

5340-15-154-1770
Tappo

151541770
130339: RNCC: 3 | RNVC: 2

27 Mar 2001

5340-15-204-5248
Utility Resilient Mount

152045248
2515VD18-45: RNCC: 3 | RNVC: 2
298-3109: RNCC: 5 | RNVC: 2
2515VD18-45: RNCC: 5 | RNVC: 2

8 Nov 2011

5340-15-112-8022
Double Angle Bracket

151128022
252A1334-001: RNCC: 3 | RNVC: 2

27 Oct 1990

5340-15-174-7416
Film Spesso

151747416
344-0166/01.03: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-205-3843
Dust And Moisture Seal Protective Plug

152053843
HF 502-30.195 POS 10: RNCC: 3 | RNVC: 2

6 Mar 2012

5340-15-136-8341
Hinge

151368341
S6122-82368-19: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-187-5440
Spacing Threaded Standoff

151875440
E5348.0000: RNCC: 3 | RNVC: 2

9 Apr 2009

5340-15-155-1407
Resilient Mount

151551407
142079802: RNCC: 3 | RNVC: 2

18 Jan 2002

5340-15-114-0863
Piastradiprotezione

151140863
743854-0001: RNCC: 3 | RNVC: 2

22 Apr 1992

5340-15-111-6009
Holder

151116009
A05147-01-24: RNCC: 3 | RNVC: 2
A05147-01-24: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-060-2534
Nut And Bolt Locking Plate

150602534
1740-04: RNCC: 3 | RNVC: 2

4 Dec 1976

5340-15-153-3303
Threaded End Tensioning Tie Rod

151533303
230022219: RNCC: 3 | RNVC: 2
A84UNI2023-AQ34-673FOS: RNCC: 5 | RNVC: 2

14 Dec 2000

5340-15-120-7592
Dust And Moisture Seal Protective Cap

151207592
420566-220: RNCC: 3 | RNVC: 2

31 Jul 1995

5340-15-193-3236
Plastic End Cap

151933236
100345411220: RNCC: 3 | RNVC: 2
(241)AE414100345411220: RNCC: 5 | RNVC: 2

30 Apr 2010

5340-15-113-8735
Coperturasupportopo

151138735
1R 584417LA: RNCC: 3 | RNVC: 2
1R 584417LA: RNCC: 5 | RNVC: 9

13 Jun 1994

5340-15-166-5178
Link

151665178
MBEU60444: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-149-3062
Leva Comando Valvol

151493062
4885620: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-005-6456
Coperchio Speciale

150056456
0-21117: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-009-7121
Double Angle Bracket

150097121
1236-09-176: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-220-0870
Piolo

152200870
1839-42: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-074-4196
Turnbuckle

150744196
1B6UNI20190T60-2012A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-204-7918
Paracolpo Gomma

152047918
1021/A/015.014.000: RNCC: 3 | RNVC: 2
(241)A39171021/A/015.014.000: RNCC: 5 | RNVC: 2

10 Jan 2012

5340-15-116-9706
Air Connection

151169706
RBE3.6151/HP/OS/IC: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-149-3999
Door Assy

151493999
518-33-0190: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-15-105-1183
Porta Pomello

151051183
1500/IC/III-08.09.58-14-US: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-139-5301
Tassello Gomma

151395301
8557780: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-185-5425
Lucchetto Ottone Da

151855425
140.20: RNCC: 3 | RNVC: 9
140.020: RNCC: 5 | RNVC: 9

30 Dec 2008

5340-15-120-8915
Hook

151208915
982150186: RNCC: 3 | RNVC: 2

4 Sep 1995

5340-15-106-5596
Blocchetto Fissaggi

151065596
4543282: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-114-8315
Corredoinstallazion

151148315
188-2013/01: RNCC: 3 | RNVC: 2

12 Aug 1992

5340-15-153-7165
Piastra Bloccaggio

151537165
142024321: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-115-8693
Bracket

151158693
273666G3: RNCC: 3 | RNVC: 2
71-02-023-009: RNCC: 3 | RNVC: 2

1 Feb 1993

5340-15-102-1036
Dispositivo Di Fiss

151021036
193-0486/22: RNCC: 3 | RNVC: 2

22 Jun 1986

5340-15-170-8079
Supporto Con Allumi

151708079
141-3153/01: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-150-5363
Special Insert

151505363
340-8544/01: RNCC: 3 | RNVC: 2

30 Nov 1999

5340-15-218-1952
Morsetto

152181952
MORSETTO340MM: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-166-5259
Telaio

151665259
542151: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-204-0258
Pattino Di Metallo

152040258
504314064: RNCC: 3 | RNVC: 2

19 Aug 2011

5340-15-215-4049
Cintura Portatutto

152154049
6.25377: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-065-7495
Spanfr

150657495
RM691-01: RNCC: 3 | RNVC: 2
RM691-01: RNCC: 5 | RNVC: 9
RM691-01: RNCC: 5 | RNVC: 9

27 Oct 1985

5340-15-105-6302
Collare Serraggio

151056302
4973767: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-112-3551
Resilient Mount

151123551
60143421: RNCC: 3 | RNVC: 2
60143421: RNCC: 5 | RNVC: 2
(241)AF90860143421: RNCC: 5 | RNVC: 2

25 Sep 1998

5340-15-200-2668
Cinghia Portamanich

152002668
4713050105: RNCC: 3 | RNVC: 2

15 Nov 2005

5340-15-118-0407
Asta Sottraente Cil

151180407
D0484600: RNCC: 3 | RNVC: 2

18 Nov 1994

5340-15-150-3199
Ball

151503199
DIA 9,52: RNCC: 3 | RNVC: 2

29 Sep 1999

5340-15-116-8648
Handwheel

151168648
D0470298: RNCC: 3 | RNVC: 2

8 Apr 1994

5340-15-065-6023
Supporto Completo

150656023
109-0512-19-1: RNCC: 3 | RNVC: 2

16 Dec 1984

5340-15-115-7031
Rubinetto Di Commut

151157031
D1201080: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-218-2282
Scovolo Abrasivo Mm

152182282
1321SA-MM32: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-104-8855
Fissaggio Gaffetta

151048855
8818131: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-222-2276
Ang. Fissaggio 80X8

152222276
S1-110E: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-007-2732
Co Mensola Speciale

150072732
1386132: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-197-6641
Headless Straight Rod

151976641
190.041 A: RNCC: 3 | RNVC: 2

19 Apr 2004

5340-15-220-0507
Lam.Elcom Sys Lg450

152200507
S1-145O: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-057-9211
Dust And Moisture Seal Protective Cap

150579211
720696-10: RNCC: 3 | RNVC: 2
720696-10: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-100-4180
Nut And Bolt Locking Plate

151004180
1808-106: RNCC: 3 | RNVC: 2
1808-106: RNCC: 5 | RNVC: 9

24 Nov 1986

5340-15-197-8784
Antivibrante

151978784
MG-DP-120: RNCC: 3 | RNVC: 2

24 May 2004

5340-15-103-4249
Nut And Bolt Locking Plate

151034249
276983ART3: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-166-4981
Oke

151664981
2668345: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-179-3781
Handwheel

151793781
400091: RNCC: 3 | RNVC: 2

28 Nov 2006

5340-15-117-4027
Corpo Protezione Pu

151174027
D1405564: RNCC: 3 | RNVC: 2

31 Mar 1994

5340-15-106-0048
Piastra Bloccaggio

151060048
843935: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-000-6559
Support Bracket

150006559
4156T20G01: RNCC: 3 | RNVC: 2

28 Mar 2013

5340-15-105-6006
Staffa A Gomito

151056006
002.6825.0: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-159-9735
Rubber Bumper

151599735
122603569: RNCC: 3 | RNVC: 2

19 Apr 2004

5340-15-152-0539
Grommet

151520539
8854 124-181: RNCC: 3 | RNVC: 2

3 Aug 2000

5340-15-194-3909
Reinforcement

151943909
109-0371-47-117: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-15-155-0952
Special Bolt

151550952
J57150585-001: RNCC: 3 | RNVC: 2

17 Jan 2002

5340-15-180-4539
Piastra Di Montaggi

151804539
504239703: RNCC: 3 | RNVC: 2
(241)A4249504239703: RNCC: 5 | RNVC: 2

27 May 2008

5340-15-001-6865
Molla

150016865
174167003: RNCC: 3 | RNVC: 2
174167003: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-115-1016
Corrosion Preventive Anode

151151016
CD84T150-16604-9: RNCC: 3 | RNVC: 2

2 Sep 1993

5340-15-181-3386
Tampone Ammortizzat

151813386
00130059: RNCC: 3 | RNVC: 2
0-130059: RNCC: 5 | RNVC: 2
(241)A39630-130059: RNCC: 5 | RNVC: 2

3 Dec 2008

5340-15-041-9967
Molla

150419967
2-2267-201-31164-1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-149-0798
Supporto Pannello

151490798
20645-29-008: RNCC: 3 | RNVC: 2
20645-29-008: RNCC: 5 | RNVC: 9

23 Nov 1998

5340-15-136-5419
Semicerniera

151365419
212-060-814-21: RNCC: 3 | RNVC: 2

30 May 2000

5340-15-166-5214
Protective Cap

151665214
GPN610U14: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-074-4384
Turnbuckle

150744384
2C64UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-103-2065
Lamierino Di Sicure

151032065
L5111005: RNCC: 3 | RNVC: 2
DE160.03.125: RNCC: 5 | RNVC: 2
(241)A5015DE160.03.125: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-109-2564
Snap Hook

151092564
9.6.79-0.0.0: RNCC: 3 | RNVC: 2

31 Jan 1990

5340-15-149-0416
Collarino Di Fissag

151490416
D-0099.11.06.00: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-113-1920
Liquid Holding Unit Filler Neck

151131920
769826-1: RNCC: 3 | RNVC: 2

31 Mar 1991

5340-15-170-3597
Clip

151703597
206-031-427-19: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-050-3601
Tornichetto

150503601
EF5-40A: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-218-2277
Fustella A Cavallot

152182277
ALFA524MM6: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-120-6794
Assieme Giunto Di A

151206794
D0491731: RNCC: 3 | RNVC: 2

8 May 1996

5340-15-237-2658
Collare Fissaggio C

152372658
CLL200: RNCC: 3 | RNVC: 2
534015E036416: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-117-9757
Dust And Moisture Seal Protective Cap

151179757
145511236: RNCC: 3 | RNVC: 2

22 Feb 1994

5340-15-151-9829
Staffa

151519829
0-153320: RNCC: 3 | RNVC: 2

31 Jul 2000

5340-15-187-5480
Spacing Threaded Standoff

151875480
G1031.0000: RNCC: 3 | RNVC: 2

9 Apr 2009

5340-15-057-9265
Dust And Moisture Seal Protective Plug

150579265
44220: RNCC: 3 | RNVC: 2
44220: RNCC: 5 | RNVC: 9
44220: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-066-1225
Feeler Rod

150661225
01TC20961: RNCC: 3 | RNVC: 2

10 Feb 1986

5340-15-219-6616
Ganci Per Pannello

152196616
PANMISTGAN: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-005-2637
Tappo Sferico

150052637
0-10062: RNCC: 3 | RNVC: 2

7 Sep 1978

5340-15-006-0147
Anchor Strap

150060147
B512TL223: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-107-6590
Corpi Accesso

151076590
0923101: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-062-4712
Eye End Alignment

150624712
MRA818-405: RNCC: 3 | RNVC: 2

5 Apr 1982

5340-15-108-2380
Testa Di Tirante Fi

151082380
433A1422-403: RNCC: 3 | RNVC: 2

19 Jul 1989

5340-15-148-7509
Spec Sede Sinistra

151487509
2104-0049-001: RNCC: 3 | RNVC: 2

30 Sep 1998

5340-15-063-6126
Nut And Bolt Locking Plate

150636126
4695415: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-001-8299
Dust And Moisture Seal Protective Cap-Plug

150018299
4749941: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-117-2040
Corrosion Preventive Anode

151172040
44083/59275: RNCC: 3 | RNVC: 2

23 Mar 1994

5340-15-201-9656
Riparo

152019656
79089955: RNCC: 3 | RNVC: 2
(241)AD75179089955: RNCC: 5 | RNVC: 2
79089955: RNCC: 5 | RNVC: 2

17 Jan 2007

5340-15-106-0832
Chiusura Ad Agganci

151060832
411: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-004-4206
Doorstop

150044206
2-11277-000-77759: RNCC: 3 | RNVC: 2
2-11277-000-77759: RNCC: 5 | RNVC: 2
2-11277-000-77759: RNCC: 5 | RNVC: 9

9 May 1978

5340-15-166-5045
Rod End

151665045
232A1968001: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-234-1214
Staffa A Ponte Con

152341214
1001: RNCC: 3 | RNVC: 2
534015E097373: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-154-2125
Giunto

151542125
269A1304-001: RNCC: 3 | RNVC: 2

28 Mar 2001

5340-15-139-2705
Chiudiporta A Crema

151392705
32014: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-178-2764
Chain Stop

151782764
ART.207/2: RNCC: 3 | RNVC: 2

29 Apr 2005

5340-15-009-5309
Bracket

150095309
4-21815C: RNCC: 5 | RNVC: 2
4-21815C: RNCC: 5 | RNVC: 9

6 Dec 1980

5340-15-103-0996
Electrical-Me Post

151030996
FS8312/22: RNCC: 3 | RNVC: 2
(241)A4499FS8312/22: RNCC: 5 | RNVC: 2
DE160.02.125: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-170-8046
Piastra Di Pression

151708046
340-0333/01: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-153-6617
Salda Chiavistello

151536617
142045820: RNCC: 1 | RNVC: 3

20 Feb 2001

5340-15-173-3017
Staffa Fissaggio Ic

151733017
41340006000: RNCC: 1 | RNVC: 2

1 Jun 2003

5340-15-174-9469
Distanziale

151749469
8574217: RNCC: 3 | RNVC: 2

17 Oct 2003

5340-15-052-2478
Morsetto Serratubi

150522478
B740-20-21: RNCC: 3 | RNVC: 2

18 Jun 1970

5340-15-232-3876
Rondella Piatta

152323876
5387/59 3-19: RNCC: 3 | RNVC: 2
534015E150131: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-176-4521
Serratura Sicurezza

151764521
CISA57125-60: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-136-6697
Fermo

151366697
S6122-82538-1: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-153-6991
Rubber Bumper

151536991
121121110: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-179-0025
Support

151790025
RS 412 124 A: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-179-6279

5340-15-116-8513
Fondello Per Pompa

151168513
D0469496: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-15-233-2577
Ruota Con Supporto

152332577
921: RNCC: 3 | RNVC: 2
534015E062793: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-169-3296
Lucchetto C.

151693296
F72010653: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-106-4418
Proiettore Molletta

151064418
9909927: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-187-9664
Post Mounting

151879664
2350: RNCC: 3 | RNVC: 2
(241)AF1202350: RNCC: 5 | RNVC: 2

9 Jun 2009

5340-15-116-8607
Passaggio A Scafo

151168607
D1402601: RNCC: 3 | RNVC: 2

8 Apr 1994

5340-15-139-9521
Chiave Per Serratur

151399521
UL052: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-127-4543
Valvola Aspir Molla

151274543
851910: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-115-8461
Hanger

151158461
264207P1: RNCC: 3 | RNVC: 2
71-02-027-017: RNCC: 3 | RNVC: 2

1 Feb 1993

5340-15-181-8792
Cardine Da 18 A Sal

151818792
11383: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-218-3490
Catena Genovese Mm.

152183490
CATENAMM1,6: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-141-1194
Tassello In Nylon C

151411194
06V: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-064-7509
Boccola Speciale

150647509
0-30074: RNCC: 3 | RNVC: 2

20 Apr 1984

5340-15-212-2154
Tasselli

152122154
SBN9-4GS: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-118-1319
Forcella Suporto Sc

151181319
23635-101: RNCC: 3 | RNVC: 2
23635-101A00: RNCC: 5 | RNVC: 2

23 Mar 1994

5340-15-041-8413
Fascetta

150418413
7-5415-101-45614: RNCC: 3 | RNVC: 2
7-5415-1-01-45614: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-151-9366
Staffa

151519366
0-172489: RNCC: 3 | RNVC: 2
00172489: RNCC: 3 | RNVC: 2
(241)A39630-172489: RNCC: 5 | RNVC: 2

26 Jul 2000

5340-15-156-6063
Nut And Bolt Retainer

151566063
7F2836FERMO: RNCC: 3 | RNVC: 2

3 Mar 2003

5340-15-003-3469
Manual Control Lever

150033469
182724337: RNCC: 3 | RNVC: 2
(241)A0199182724337: RNCC: 5 | RNVC: 2

4 Nov 2013

5340-15-187-4307
Sliding Block

151874307
808042: RNCC: 3 | RNVC: 2
0000.808.042: RNCC: 3 | RNVC: 2

30 Mar 2009

5340-15-157-0326
Resilient Mount

151570326
258.231.014: RNCC: 3 | RNVC: 2
(241)A1997258.231.014: RNCC: 5 | RNVC: 2

10 Apr 2003

5340-15-107-9279
Control Rod

151079279
01327: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-118-5519
Manicotto Portaguar

151185519
D0473726: RNCC: 3 | RNVC: 2

10 Jan 1995

5340-15-113-8744
Sospensioneantiurto

151138744
1Q 520445LB: RNCC: 3 | RNVC: 2
1Q 520445LB: RNCC: 5 | RNVC: 9

19 May 1993

5340-15-109-2869
Dispositivodifissag

151092869
40993/A1: RNCC: 3 | RNVC: 2
40993/A1: RNCC: 5 | RNVC: 9

30 May 1989

5340-15-003-9045
Stand Base

150039045
182746901: RNCC: 3 | RNVC: 2
(241)A0199182746901: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-122-2419
Crochet Durite

151222419
80A031794: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-149-5933
Lateral Handle Plat

151495933
340-5769/01: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-100-2511
Intermally Rod End

151002511
39X1151-13: RNCC: 3 | RNVC: 2

9 Feb 1987

5340-15-112-7910
Resilient Mount

151127910
V1135-04A: RNCC: 3 | RNVC: 2
V1135-04A: RNCC: 8 | RNVC: 2

7 Sep 1989

5340-15-201-4560
An Bracket Assembly

152014560
412-9030-47-119: RNCC: 3 | RNVC: 2
(241)A0126412-9030-47-119: RNCC: 5 | RNVC: 2

18 Sep 2006

5340-15-154-2040
Double Angle Bracket

151542040
0-168428: RNCC: 3 | RNVC: 2
(241)A39630-168428: RNCC: 5 | RNVC: 2
1PA39630-168428: RNCC: 5 | RNVC: 2

28 Mar 2001

5340-15-109-7277
Helical Compression Spring Seat

151097277
773838: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-068-4928
Cover Plate Access

150684928
2919-2: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-106-4961
Fermapentole Comple

151064961
417/IC/III-18.02.53-11-US: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-177-3415
Spacing Threaded Standoff

151773415
8106634: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-074-4016
Turnbuckle

150744016
1A30UNI2018A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-175-5977
Serragiunto

151755977
EX5340RI4219246: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-119-0191
Resilient Mount

151190191
70666335: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-139-7975
Chiaviste Catenella

151397975
1001701: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-065-1336
Maniglia

150651336
122369-801: RNCC: 3 | RNVC: 2

24 Jul 1984

5340-15-118-0459
Portaguarnizioni

151180459
D0487873: RNCC: 3 | RNVC: 2

18 Nov 1994

5340-15-212-0577
Tela Smeriglio Gran

152120577
TELASMERIGLIO400: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-105-6010
Staffa A Gomito

151056010
4553829: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-185-9730
Chiudiporta A Pavim

151859730
MAB7115: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-063-7343
Tappo Carico Olio C

150637343
23.00.49.00: RNCC: 3 | RNVC: 2

9 Jun 1983

5340-15-006-2741
Maniglia Speciale

150062741
0-33982: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-062-0696
Hinge

150620696
P882734-002: RNCC: 3 | RNVC: 2

27 Oct 1980

5340-15-194-8723
Cover Oil Breather

151948723
71591: RNCC: 3 | RNVC: 2
10/906514: RNCC: 5 | RNVC: 2

27 Jan 2011

5340-15-156-7978
Thr Tension Tie Rod

151567978
11GJ04343024S01-435: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-15-105-8184
Sostegno Elastico

151058184
66-BB1: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-194-4643
Corrosion Preventive Anode

151944643
43.272.86: RNCC: 3 | RNVC: 2
(241)A492843.272.86: RNCC: 5 | RNVC: 2

18 Nov 2010

5340-15-121-7577
Cerniera Metallica

151217577
740705: RNCC: 3 | RNVC: 2

14 Feb 1996

5340-15-089-0657
Gancio

150890657
6154568: RNCC: 3 | RNVC: 2
6154568: RNCC: 3 | RNVC: 2

1 Jan 1974

Load More Results