What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 31 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 31 of 72

5340-15-135-9271
Bottone A Scatto

151359271
99-5001-10-144: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-115-1843
Spring Clip

151151843
9-1240-077: RNCC: 3 | RNVC: 2
82-00559: RNCC: 5 | RNVC: 2

29 Nov 1992

5340-15-211-1690
Svitato Sblock

152111690
81100180: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-153-6983
Rubber Bumper

151536983
121106180: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-210-9542
Molla Passacavo

152109542
MOLLAPASSACAVO: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-158-3534
Disco Ammortizzator

151583534
22251/X: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-15-170-4487
Manual Control Handle

151704487
32426: RNCC: 3 | RNVC: 2

16 Jan 2003

5340-15-002-1663
Manual Control Lever

150021663
42567102: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-188-9196
Spring Holder

151889196
D1419699: RNCC: 3 | RNVC: 2
(241)A0461D1419699: RNCC: 5 | RNVC: 2

16 Dec 2009

5340-15-041-0619
Forcella

150410619
2-3189-100-24708-1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-105-6047
Snap Hook

151056047
2/20328-09.03.74-08: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-207-7428
Support Bracket

152077428
4156T16G01: RNCC: 3 | RNVC: 2
(241)A34604156T16G01: RNCC: 5 | RNVC: 2

15 Nov 2012

5340-15-101-7457
Piastra Forata

151017457
P14: RNCC: 3 | RNVC: 2

4 Feb 1994

5340-15-101-7841
Fascetta Speciale

151017841
SC32674.81S: RNCC: 3 | RNVC: 2

21 Jul 1987

5340-15-147-5140
Assieme Sonda

151475140
41293-001: RNCC: 5 | RNVC: 2
41293-001: RNCC: 5 | RNVC: 9
41293-001: RNCC: 5 | RNVC: 9

12 Dec 1997

5340-15-111-5668
Handle Crank

151115668
01TL20810: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-180-0598
Bracket

151800598
800442: RNCC: 3 | RNVC: 2

10 Jan 2008

5340-15-108-8020
Helical Compression Spring Seat

151088020
4516435: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-074-4255
Turnbuckle

150744255
2D30UNI2019AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-200-9856
Corrosion Preventive Anode

152009856
116116P2/IR: RNCC: 3 | RNVC: 2
(241)A5205116116P2/IR: RNCC: 5 | RNVC: 2

26 Apr 2006

5340-15-204-0455
Modular Block

152040455
G386075000: RNCC: 3 | RNVC: 2

23 Aug 2011

5340-15-107-9066
Control Rod

151079066
588274: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-109-0986
Barra Di Collegamen

151090986
TM3.0340.029.10: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-121-6340
Cliquet Selection

151216340
800036795: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-195-8377
Sostegno Elastico

151958377
102613: RNCC: 3 | RNVC: 2
040.20.038: RNCC: 3 | RNVC: 2
(241)A3593102613: RNCC: 5 | RNVC: 2

18 May 2011

5340-15-148-9425
Attacco Ad Occhio

151489425
2302-0062-001: RNCC: 3 | RNVC: 2

5 Nov 1998

5340-15-061-2414
Helical Compression Spring Retainer

150612414
000200052900: RNCC: 5 | RNVC: 2
1200096-111600007: RNCC: 5 | RNVC: 2
000200052900: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-100-1568
Forcella

151001568
32.27.179.0: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-106-6642
Timone Ruota

151066642
0.1281.56: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-141-4408
Anodo

151414408
W011313: RNCC: 3 | RNVC: 2
(7001)5340151414408: RNCC: 5 | RNVC: 2

9 Jun 1997

5340-15-194-1973
Headless Straight Rod

151941973
9911190345: RNCC: 3 | RNVC: 2

1 Oct 2010

5340-15-154-1369
Tirante

151541369
0-82577: RNCC: 3 | RNVC: 2
(241)A39630-82577: RNCC: 5 | RNVC: 2
1PA39630-82577: RNCC: 5 | RNVC: 2

22 Mar 2001

5340-15-178-2017
Dust And Moisture Seal Protective Cap-Plug

151782017
212-070-463-5: RNCC: 3 | RNVC: 2

11 Mar 2005

5340-15-116-2580
Staffa Di Attacco P

151162580
SF260-13-17-01: RNCC: 3 | RNVC: 2
SF260-13-17-01: RNCC: 5 | RNVC: 9

31 Mar 1993

5340-15-119-2423
Fascetta Complessiv

151192423
A6135-90001-3: RNCC: 3 | RNVC: 2

29 Mar 1996

5340-15-153-8112
Copiaccesso

151538112
02700H010055: RNCC: 5 | RNVC: 3
02700H010055: RNCC: 5 | RNVC: 9

1 Mar 2001

5340-15-120-6906
Salterello In Otton

151206906
D0470785: RNCC: 3 | RNVC: 2

10 Jul 1996

5340-15-166-4998
Plug

151664998
200A0004003: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-110-2817
Bracket Ang

151102817
P135231-001: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-104-4336
Testa Tira Forcella

151044336
4527218: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-119-3165
Carter De Protectio

151193165
9433011: RNCC: 3 | RNVC: 2

11 Jul 1994

5340-15-150-9316
Supporto Scorrevol

151509316
650.500.28: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-15-111-5678
Segment Ring

151115678
01TC20648-03: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-112-8368
Contrappeso

151128368
471064: RNCC: 3 | RNVC: 2
D0471064: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-110-2805
Bracket Lh

151102805
P120317-001: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-206-8031
Utility Resilient Mount

152068031
VZA-R-AVU-500/5.8: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-150-2570
Speciale Fermo

151502570
26-6-91-18D: RNCC: 3 | RNVC: 2

8 Sep 1999

5340-15-163-1531
Clip

151631531
1317017080: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-215-0477
Cancano

152150477
3X40X1,5: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-105-6151
Buckle

151056151
2/25010-23.11.71-07: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-009-3320
Corpo Chiavistello

150093320
P-884035-002: RNCC: 3 | RNVC: 2

12 Sep 1980

5340-15-006-2695
Fascetta Speciale

150062695
0-34062: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-007-0737
Fascetta Speciale

150070737
0-02303: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-054-3181
Coperchio Ispezione

150543181
526205: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-137-2734
Striscia

151372734
47-682-139-57: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-163-1627
Clip

151631627
4447387: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-198-7871
Control Rod

151987871
4843764: RNCC: 3 | RNVC: 2

17 Nov 2004

5340-15-074-4146
Turnbuckle

150744146
1D22UNI2018A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-102-2842
Supporto

151022842
85.10: RNCC: 3 | RNVC: 2

8 Dec 1986

5340-15-074-4301
Turnbuckle

150744301
2A8UNI20200T60-2012AQ673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-179-1763
Listel

151791763
RS 417 878 A: RNCC: 3 | RNVC: 2

13 Jun 2006

5340-15-169-6657
Lucchetto S&G

151696657
F72017685: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-170-8253
Targa

151708253
340-0102/06.01: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-102-1063
Metal Runner

151021063
193-0472/15: RNCC: 3 | RNVC: 2

22 Jun 1986

5340-15-149-2922
Dust And Moisture Seal Protective Cap-Plug

151492922
4866424: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-154-9752
Corrosion Preventive Anode

151549752
08107981: RNCC: 3 | RNVC: 2

4 Dec 2001

5340-15-061-4326
Rim Clen Clamp (1)

150614326
1200096-113100023: RNCC: 5 | RNVC: 2
000200004000: RNCC: 5 | RNVC: 2
000200004000: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-117-2529
Assieme Scatola Con

151172529
337738-G1: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-15-071-3313
Lock Key

150713313
1014Y43: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-211-6314
Chiusura Sportello

152116314
VV82240: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-215-3930
Piastra A ' L ' 20X

152153930
1422093: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-178-9863
Fixing Yoke

151789863
Q 4 3150 9084: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-120-6928
Cannotto Guida Di O

151206928
D0468951: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-005-2636
Controghiera

150052636
0-10056: RNCC: 3 | RNVC: 2

7 Sep 1978

5340-15-065-2505
Molla

150652505
580.19361.1: RNCC: 3 | RNVC: 2

27 Oct 1981

5340-15-062-8773
Anello Di Fermo

150628773
0-42620: RNCC: 3 | RNVC: 2

9 Feb 1982

5340-15-147-0921
Manual Control Handle

151470921
5150010: RNCC: 3 | RNVC: 2

21 Aug 1997

5340-15-103-4815
Dust And Moisture Seal Protective Plug

151034815
N106002210: RNCC: 3 | RNVC: 2

1 Apr 1998

5340-15-179-6875
Double Angle Bracket

151796875
0000500400591: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-154-9313
Dust And Moisture Seal Protective Cap-Plug

151549313
CBD71013G01: RNCC: 3 | RNVC: 2

13 Nov 2001

5340-15-175-0455
Fixing System

151750455
16220: RNCC: 3 | RNVC: 2

29 Dec 2003

5340-15-216-0457
Sonda Passafilo Da

152160457
FI405: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-110-0993
Coperchio Speciale

151100993
201CA290-1TR: RNCC: 3 | RNVC: 2

10 Apr 1990

5340-15-180-9371
Lh Plate

151809371
109-0322-10-283: RNCC: 3 | RNVC: 2
(241)A0126109-0322-10-283: RNCC: 5 | RNVC: 2

22 Aug 2008

5340-15-149-5988
Cover

151495988
1230-32-117: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-020-1710
Dust And Moisture Seal Protective Plug

150201710
01-231E65: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-119-8072
Manual Control Handle

151198072
19302: RNCC: 3 | RNVC: 2
3053064: RNCC: 5 | RNVC: 2
3053064: RNCC: 5 | RNVC: 9

17 Nov 1994

5340-15-119-2364
Dust And Moisture Seal Protective Cap

151192364
151-50: RNCC: 3 | RNVC: 2
151-50: RNCC: 5 | RNVC: 9

4 Jul 1994

5340-15-153-2544
Dust And Moisture Seal Protective Plug

151532544
122605295: RNCC: 2 | RNVC: 3

12 Dec 2000

5340-15-106-4202
Piastrina

151064202
2.4629.021.0: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-154-5077
Forcella Testa Di T

151545077
1P 548274: RNCC: 3 | RNVC: 2
1P 548274: RNCC: 5 | RNVC: 9

20 Jun 2001

5340-15-005-6897
Anello Elastico Spe

150056897
0-33681: RNCC: 3 | RNVC: 2

11 Aug 1979

5340-15-127-6103
Boccola

151276103
994138: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-016-2448

5340-15-212-8841
Ruotine Spostamento

152128841
HP92210L: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-068-1961
Gruppo Staffaggio

150681961
644647: RNCC: 3 | RNVC: 2
644647: RNCC: 5 | RNVC: 9

27 Feb 1986

5340-15-112-7588
Clamp

151127588
93630008: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-103-2008
Sottogruppo Puntone

151032008
DE160.02.002: RNCC: 3 | RNVC: 2
(241)A5015DE160.02.002: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-060-5029
Electrical-Me Post

150605029
760008T: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-180-8456
Special Bolt

151808456
J32940171-003: RNCC: 3 | RNVC: 2

28 Jul 2008

5340-15-180-7266
Tappo Magnetico

151807266
R120790/55: RNCC: 3 | RNVC: 2
(241)A3121R120790/55: RNCC: 5 | RNVC: 2
99TG88876X8O: RNCC: 5 | RNVC: 2

9 Jul 2008

5340-15-155-6580
Fl Mounting Plate

151556580
05035010: RNCC: 3 | RNVC: 2

14 May 2002

5340-15-159-9731
Rubber Bumper

151599731
122603564: RNCC: 3 | RNVC: 2

19 Apr 2004

5340-15-057-3333

5340-15-172-6226
Serratura Metallica

151726226
SERRATURA METALLICA POTENT: RNCC: 1 | RNVC: 2

1 Jun 2003

5340-15-009-1175
Escutcheon Plate

150091175
127284: RNCC: 3 | RNVC: 2

10 Apr 1980

5340-15-108-9567
Rubber Bumper

151089567
32620780: RNCC: 3 | RNVC: 2

25 May 1989

5340-15-100-2630
Sleeve

151002630
25093-4: RNCC: 3 | RNVC: 2

19 Jun 1987

5340-15-220-0521
Montante 2 Ipe 220

152200521
S1-140B: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-103-2684
Electrical-Me Post

151032684
5136-235-02: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-200-8882
Shock Mount Pad

152008882
9731000044: RNCC: 3 | RNVC: 2
(241)A60209731000044: RNCC: 5 | RNVC: 2

26 Mar 2006

5340-15-003-0385
Stand Base

150030385
182771012: RNCC: 3 | RNVC: 2
(241)A0199182771012: RNCC: 5 | RNVC: 2

25 Oct 2013

5340-15-148-9727
Controlpankeyfordie

151489727
600-4021-028: RNCC: 3 | RNVC: 2

9 Nov 1998

5340-15-218-7184
6 In Fascetta 260X4

152187184
190-3900: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-118-0331
Coppa Ritegno Semia

151180331
D0467855: RNCC: 3 | RNVC: 2

1 Dec 1994

5340-15-003-8719
Spacing Threaded Standoff

150038719
61590-59/218: RNCC: 3 | RNVC: 2
61590-59/218: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-122-9220

5340-15-127-2465
Molla

151272465
35695-8-9: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-127-4516
Molla Premiguarnizi

151274516
851417: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-153-8103
Base (1) Per Sosteg

151538103
01800A133910: RNCC: 5 | RNVC: 3
01800A133910: RNCC: 5 | RNVC: 9

1 Mar 2001

5340-15-118-2852
Fascetta A Cavallot

151182852
D0485461: RNCC: 3 | RNVC: 2

1 Jun 1995

5340-15-057-2652
Resilient Mount

150572652
18750: RNCC: 3 | RNVC: 2
1127-02-110: RNCC: 5 | RNVC: 2

31 Dec 1975

5340-15-177-5921
Clamp Cover

151775921
1P 611486: RNCC: 3 | RNVC: 2

13 May 2004

5340-15-166-5093
Ritegno

151665093
39725001: RNCC: 3 | RNVC: 2
39725001: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-105-8194
Sostegno Elastico

151058194
9958: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-166-5175
Supporto Sx

151665175
39A785213502: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-062-0918
Bumper

150620918
31771-002: RNCC: 5 | RNVC: 2
31771-002: RNCC: 5 | RNVC: 9
31771-002: RNCC: 5 | RNVC: 9

27 Oct 1980

5340-15-215-3729
Lana Acciaio

152153729
LANA-ACCIAIO: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-222-2267
Pannello 1010X1020

152222267
S1-128: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-170-3826
Clevis

151703826
206-5700-15-1: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-177-6436
Half Roll Container

151776436
3.08.10.001: RNCC: 3 | RNVC: 2

4 Jun 2004

5340-15-155-4870
Shaf Support B Assy

151554870
CBD71188G01: RNCC: 3 | RNVC: 2

27 Mar 2002

5340-15-166-5151
Ruota Orientabile C

151665151
2270116: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-116-8505
T Piastrino Forato

151168505
D0467296: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-15-156-2152
Pto S Working Stand

151562152
(241)A3460CBD71163G01: RNCC: 3 | RNVC: 2
CBD71163G01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-193-7700
Utility Resilient Mount

151937700
70192962: RNCC: 3 | RNVC: 2

13 Jul 2010

5340-15-107-8057
Supporto

151078057
22946-101A2: RNCC: 3 | RNVC: 2

2 Jun 1989

5340-15-194-3539
Aircraft Latch Hook

151943539
109-0502-96-101: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-15-138-6562
Staffa

151386562
2912-4: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-139-7094
Elemento Di Imbraca

151397094
A.0123800: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-051-5463
Resilient Mount

150515463
1202-5: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-119-5631
Resilient Mount

151195631
OM07576000: RNCC: 3 | RNVC: 2
93158577: RNCC: 5 | RNVC: 2

19 Sep 1994

5340-15-199-8062
Tappo In Polietilen

151998062
D0570530: RNCC: 3 | RNVC: 2
(241)A0461D0570530: RNCC: 5 | RNVC: 2

7 Jun 2005

5340-15-181-1708
Coperchietto

151811708
178950130: RNCC: 3 | RNVC: 2
(241)A0199178950130: RNCC: 5 | RNVC: 2

5 Nov 2008

5340-15-113-6083
Arm Rocker

151136083
AC121554/1-2: RNCC: 3 | RNVC: 2

20 Jan 1992

5340-15-105-6346
Collare Serraggio

151056346
1369602: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-121-7935
Shock Mount Pad

151217935
AVAU 703A: RNCC: 3 | RNVC: 2
132508115: RNCC: 5 | RNVC: 2

21 Feb 1996

5340-15-127-5026
Arres Anello Elast

151275026
865028: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-193-0260
Piastra Di Montaggi

151930260
504041435: RNCC: 3 | RNVC: 2
(241)A4249504041435: RNCC: 5 | RNVC: 2

6 Apr 2010

5340-15-122-5610
Plug

151225610
PS701-6225-005: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-135-6875
Ritegno

151356875
50-031-1: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-115-1017
Anode Retaining Plug

151151017
CD84T150-16604-12: RNCC: 3 | RNVC: 2

2 Sep 1993

5340-15-136-1366
Staffa Supporto

151361366
4279582: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-154-9326
Protective Cover

151549326
CBD71059P01: RNCC: 3 | RNVC: 2

13 Nov 2001

5340-15-196-9931
Padlock

151969931
PN UAS 00032342: RNCC: 3 | RNVC: 2
5340F76028982: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-123-7057
Raccordo Femmina

151237057
1622B/6,3: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-120-3352
Threaded End Tensioning Tie Rod

151203352
709321-11: RNCC: 3 | RNVC: 2
8196765: RNCC: 5 | RNVC: 2
709321-11: RNCC: 5 | RNVC: 9

30 Mar 1995

5340-15-115-8690
Right Front

151158690
71-02-023-018: RNCC: 3 | RNVC: 2
273850P3: RNCC: 3 | RNVC: 2

1 Feb 1993

5340-15-045-2219
Control Rod

150452219
500-12-09: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-115-8502
Plate Assy

151158502
244776G1: RNCC: 3 | RNVC: 2
71-24-001-001: RNCC: 3 | RNVC: 2

1 Feb 1993

5340-15-179-7361
Multiple Angle Bracket

151797361
41231269: RNCC: 3 | RNVC: 2
(241)A424941231269: RNCC: 5 | RNVC: 2

7 Jun 2007

5340-15-054-8648
Helical Compression Spring Seat

150548648
6155462: RNCC: 3 | RNVC: 2
6155462: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-149-1806
Peso Di Bilanciamen

151491806
2401-0047-001: RNCC: 3 | RNVC: 2

15 Dec 1998

5340-15-109-6134
Dust And Moisture Seal Protective Cap

151096134
518415-01: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-059-5623
Perno Cerniera

150595623
03984-001: RNCC: 3 | RNVC: 2

27 Mar 1976

5340-15-007-0571
Double Angle Bracket

150070571
1137-11-902: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-207-8595
Angle Bracket

152078595
5801329573: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-118-1165
Helical Compression Spring Seat

151181165
1Z 602835: RNCC: 3 | RNVC: 2
1Z 602835: RNCC: 5 | RNVC: 9

22 Mar 1996

5340-15-211-9505
Lucchetto A Doppio

152119505
519: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-151-7805
Piastra

151517805
0-179822: RNCC: 3 | RNVC: 2

10 Jul 2000

5340-15-134-6377
Stoffa

151346377
5941069: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-136-1454
Forcella

151361454
7-66109-101-73181A1: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-103-1968
Catenella Per Tappo

151031968
DE013.13.438: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-198-7961
Control Rod

151987961
60192757: RNCC: 3 | RNVC: 2

17 Nov 2004

5340-15-158-6698
Corrosion Preventive Anode

151586698
666660124: RNCC: 3 | RNVC: 2
(241)A5103666660124: RNCC: 5 | RNVC: 2

19 Mar 2004

5340-15-136-9463
Fascetta

151369463
AN741T9P: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-198-9709
Oblo'

151989709
57101142: RNCC: 3 | RNVC: 2
(241)A486757101142: RNCC: 5 | RNVC: 2

14 Dec 2004

5340-15-152-3618
Piastrina

151523618
0-153356: RNCC: 3 | RNVC: 2
00153356: RNCC: 3 | RNVC: 2
(241)A396300153356: RNCC: 5 | RNVC: 2
(241)A39630-153356: RNCC: 5 | RNVC: 2

4 Sep 2000

5340-15-119-7531
Grip

151197531
P-160501-401/402-12C001-207: RNCC: 3 | RNVC: 2
P160501-401/402-12C001-207: RNCC: 5 | RNVC: 2

17 Nov 1994

5340-15-151-4114
Staffa

151514114
0-174689: RNCC: 3 | RNVC: 2
1PA39630-174689: RNCC: 5 | RNVC: 2
(241)A39630-174689: RNCC: 5 | RNVC: 2

22 May 2000

5340-15-153-4022
Elettro-Me Raccordo

151534022
5137-321-15: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-156-3908
Assembly Stand Assy

151563908
(241)A3460CBD71356G01: RNCC: 3 | RNVC: 2
CBD71356G01: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-074-4028
Turnbuckle

150744028
1A8UNI20180T60-2012AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-135-9460
Tassello Elastico

151359460
4339248: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-106-3251
Staffa

151063251
872574: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-120-6469
Tappo Speciale File

151206469
D0471348: RNCC: 3 | RNVC: 2

26 Jun 1996

5340-15-061-2434
Anchor Strap

150612434
000200057100: RNCC: 5 | RNVC: 2
1200096-13A111003: RNCC: 5 | RNVC: 2
000200057100: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-135-9855
Silent

151359855
736-802: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-138-6635
Staffa

151386635
3111: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-147-3067
Strap Secur

151473067
A302950: RNCC: 3 | RNVC: 2

31 Oct 1997

5340-15-203-4503
Hatc Hinge Assembly

152034503
N523G5395101: RNCC: 3 | RNVC: 2

3 Feb 2008

5340-15-142-9037
Plug

151429037
474974: RNCC: 3 | RNVC: 2

22 Oct 1996

5340-15-060-1588
Access Cover Plate

150601588
1276-19-303: RNCC: 3 | RNVC: 2
127619303: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-115-3363
Cover

151153363
710-2640-007: RNCC: 3 | RNVC: 2
82-01751: RNCC: 5 | RNVC: 2

29 Nov 1992

5340-15-121-6247
Barrette Caoutchouc

151216247
800023801: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-007-5176
Nonrotating Shaft Eye Bracket

150075176
1239-01-164: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-169-6409
Padlock

151696409
F72015964: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-122-5153
Bracket

151225153
01TL23404: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-211-1699
Confezione Punti Pz

152111699
69900060: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-112-0437
Dispositivo Di Supp

151120437
275A0118-403: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-074-4291
Turnbuckle

150744291
2A36UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-216-1129
Lucchetto Da Mm 94

152161129
ART108: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-159-9748
Rubber Bumper

151599748
1M00523007: RNCC: 3 | RNVC: 2

19 Apr 2004

5340-15-166-4852
Taschina Grezza

151664852
035821668: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-174-7480
Piatto 40X10 Pe Als

151747480
54130-01/179: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-076-1872
Helical Compression Spring Retainer

150761872
M0-1138: RNCC: 3 | RNVC: 2
M01138: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-001-3394
Angle Bracket

150013394
504382230: RNCC: 3 | RNVC: 2

17 Jun 2013

5340-15-156-4753
Seat Pipe Support

151564753
0-121341: RNCC: 3 | RNVC: 2
(241)A39630-121341: RNCC: 5 | RNVC: 2
1PA39630-121341: RNCC: 5 | RNVC: 2

13 Feb 2003

5340-15-151-7837
Silentblock

151517837
0-42061: RNCC: 3 | RNVC: 2
00042061: RNCC: 3 | RNVC: 2
(241)A39630-42061: RNCC: 5 | RNVC: 2
1PA39630-42061: RNCC: 5 | RNVC: 2

10 Jul 2000

5340-15-009-2244
Helical Compression Spring Seat

150092244
895-362-680-4: RNCC: 3 | RNVC: 2
00056109: RNCC: 4 | RNVC: 1
8953626804: RNCC: 5 | RNVC: 2
(241)A396300056109: RNCC: 5 | RNVC: 2
9932523: RNCC: 5 | RNVC: 2

22 Sep 1981

5340-15-121-3261
Collar

151213261
920-0304-01: RNCC: 3 | RNVC: 2

7 Nov 1995

5340-15-217-1956
Canalina Bianca 25X

152171956
RE2525B: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-212-4064
Staffe Per Paline A

152124064
TEC02-02: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-114-8247
Kitviteria

151148247
188-2000/01: RNCC: 3 | RNVC: 2

12 Aug 1992

5340-15-139-8530
Staffa Per Fissaggi

151398530
110003: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-126-4494
Molla

151264494
14560-20: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-006-0143
Anchor Strap

150060143
B512TL163: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-136-2677
Staffa

151362677
7300932: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-003-7653
Dust And Moisture Seal Protective Plug

150037653
TAP 0601 NERO RAL 9004: RNCC: 3 | RNVC: 2

22 Nov 2013

5340-15-119-5423
Piastrina Anteriore

151195423
D0481795: RNCC: 3 | RNVC: 2

24 Mar 1995

5340-15-003-7543
Universal Adjustable Chock

150037543
00064: RNCC: 3 | RNVC: 2

20 Nov 2013

5340-15-115-8572
Slide Teles

151158572
71-70-130-004: RNCC: 3 | RNVC: 2
295063P2: RNCC: 3 | RNVC: 2

1 Feb 1993

5340-15-211-4842
Aggancio Registrabi

152114842
60/35: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-155-3352
Fl Mounting Plate

151553352
98412669: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-15-142-8565
Maniglia

151428565
10PV00006-584: RNCC: 3 | RNVC: 2
10PV00006-584: RNCC: 5 | RNVC: 9

9 Jun 1997

5340-15-189-9343
Strisce Tapparelle

151899343
148: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-112-1300
Barrettafissaggio

151121300
DE013.12.808: RNCC: 3 | RNVC: 2

12 Feb 1991

5340-15-100-7976
Coperchio Sottoassi

151007976
000900259950: RNCC: 5 | RNVC: 2
000900259950: RNCC: 5 | RNVC: 9

20 Nov 1986

5340-15-089-9370
Dust And Moisture Seal Protective Cap

150899370
A106074: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-170-4199
Dust And Moisture Seal Protective Cap

151704199
380000-5666: RNCC: 3 | RNVC: 2

16 Jan 2003

5340-15-114-2454
Dust And Moisture Seal Protective Cap

151142454
16300: RNCC: 3 | RNVC: 2

30 Nov 1993

5340-15-074-4142
Telephone Coil (1)

150744142
1D10UNI2018A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-147-0518
Disco Con Lame

151470518
1R610959: RNCC: 3 | RNVC: 2
1R610959: RNCC: 5 | RNVC: 9

18 Aug 1997

5340-15-000-4938
Rod

150004938
13HJ04643228S01-413-001: RNCC: 3 | RNVC: 2
(241)A001913HJ04643228S01-413-00: RNCC: 5 | RNVC: 2

11 Mar 2013

5340-15-148-0010
Semicerniera

151480010
129-0640-45-101: RNCC: 3 | RNVC: 2

4 Jun 1998

5340-15-199-4400
Asse

151994400
495545: RNCC: 3 | RNVC: 2
(241)A0866495545: RNCC: 5 | RNVC: 2

4 Apr 2005

5340-15-157-2433
Shock Mount Pad

151572433
DE069.95.026: RNCC: 3 | RNVC: 2
(241)A5015DE069.95.026: RNCC: 5 | RNVC: 2

9 Jun 2003

5340-15-063-8040
Metal Runner

150638040
590329: RNCC: 3 | RNVC: 2

31 Mar 1982

5340-15-139-7702
Fissaggio Gaffetta

151397702
0047016: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-152-3502
Double Angle Bracket

151523502
0-159186: RNCC: 3 | RNVC: 2
00159186: RNCC: 3 | RNVC: 2
(241)A39630-159186: RNCC: 5 | RNVC: 2

4 Sep 2000

5340-15-113-1711
Threaded End Tensioning Tie Rod

151131711
331A2509-001: RNCC: 3 | RNVC: 2

7 Sep 1990

5340-15-174-6443
Dust And Moisture Seal Protective Cover

151746443
CARP33078: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-15-002-3200
Dust And Moisture Seal Protective Cap

150023200
551916012000: RNCC: 3 | RNVC: 2

6 Aug 2013

5340-15-189-5214
Collare Collettore

151895214
17571-250S: RNCC: 3 | RNVC: 2

26 Feb 2010

5340-15-008-0724
Rubber Bumper

150080724
60112904: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-005-6435
Fascetta Speciale

150056435
0-15880: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-002-5961
Double Angle Bracket

150025961
5801359894: RNCC: 3 | RNVC: 2

4 Sep 2013

5340-15-064-9126
Cappuccio Di Gomma

5340-15-133-9355
Disco Portafreno De

151339355
4288036: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-198-3277
Corrosion Preventive Anode

151983277
DN50DC37: RNCC: 3 | RNVC: 2

22 Sep 2004

5340-15-112-3455
Helical Compression Spring Seat

151123455
8858490: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-207-8382
Spacing Threaded Standoff

152078382
3527.509: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-179-0377
Dust And Moisture Seal Protective Cap

151790377
687656: RNCC: 3 | RNVC: 2

20 Apr 2006

5340-15-060-7089
Cerniera Compl Post

150607089
109-0310-47-2: RNCC: 3 | RNVC: 2

14 Dec 1976

5340-15-150-4479
Manual Control Handle

151504479
VRU.250+I: RNCC: 3 | RNVC: 2
42K136P004: RNCC: 5 | RNVC: 2

11 Nov 1999

5340-15-204-5854
Sostegno Elastico

152045854
V3CA-8110-03NN: RNCC: 3 | RNVC: 2
(241)A5184V3CA-8110-03NN: RNCC: 5 | RNVC: 2

22 Nov 2011

5340-15-152-6414
Assieme Morsetti

151526414
0-107959: RNCC: 3 | RNVC: 2

3 Oct 2000

5340-15-219-9735
Ruota A Supporto In

152199735
335-80: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-007-7587
Puntale Speciale

150077587
0-33581: RNCC: 3 | RNVC: 2

23 Apr 1980

5340-15-113-6115
Pin Headles

151136115
AC127867-1/11-2: RNCC: 3 | RNVC: 2

20 Jan 1992

5340-15-233-7672
Serratura Con Aste

152337672
CR3300: RNCC: 3 | RNVC: 2
534015E023058: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-179-9411
Frame

151799411
504205312: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-189-8322
Gaino Carpentiere

151898322
GAINO60: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-166-6323
Escutcheon Plate

151666323
13740: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-056-5938
Tappo Soprabalestra

150565938
13604: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-124-1740
Calotta Colorata 18

151241740
31-951: RNCC: 3 | RNVC: 2
31-951: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-053-0679
Coupling Assembly

150530679
115537A1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-153-5166
Access Door

151535166
142010820: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-198-8162
Speciale Collare

151988162
142015246: RNCC: 3 | RNVC: 2

18 Nov 2004

5340-15-006-2716
Piastra Speciale

150062716
0-33943: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-181-7951
Stop A Muro In Acci

151817951
DEL8100: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-116-6239
Assiemelevaascatto

151166239
DPR 23416/1-4: RNCC: 3 | RNVC: 2

22 Nov 1993

5340-15-172-6225
Serratura Marca Cis

151726225
SERRATURA MARCA CISA MOD.50511.6: RNCC: 1 | RNVC: 2

1 Jun 2003

5340-15-189-4508
Guida

151894508
5F1-1-51: RNCC: 3 | RNVC: 2

19 Feb 2010

5340-15-112-8510
Occhiello

151128510
471857: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-112-8327
Canottos

151128327
471255: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-068-1952
Gruppo Staffaggio

150681952
644635: RNCC: 3 | RNVC: 2
644635: RNCC: 5 | RNVC: 9

27 Feb 1986

5340-15-212-7671
Piastra

152127671
450-0103: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-001-1779
Friction Catch Stud Receptacle

150011779
504376335: RNCC: 3 | RNVC: 2

3 Jun 2013

5340-15-217-9457
Chiavistello

152179457
CHIAVISTELLO: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-202-2807
Fascetta Fissaggio

152022807
41231099: RNCC: 3 | RNVC: 2
(241)A424941231099: RNCC: 5 | RNVC: 2

19 Feb 2007

5340-15-117-0630
Levier De Capotage

151170630
79023986: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-064-6347
Electrical-Me Post

150646347
01-245-E-107: RNCC: 3 | RNVC: 2

24 Jun 1984

5340-15-120-6973
Staffa Di Fissaggio

151206973
D1401669: RNCC: 3 | RNVC: 2

4 Jul 1996

5340-15-186-3047
Apparecchio Traccia

151863047
103302: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-051-4104
Anello

150514104
4006234: RNCC: 3 | RNVC: 2
4006234: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-151-9410
Staffa

151519410
0-174031: RNCC: 3 | RNVC: 2
00174031: RNCC: 3 | RNVC: 2
(241)A39630-174031: RNCC: 5 | RNVC: 2

26 Jul 2000

5340-15-115-4378
Half Hinge

151154378
P-852715-001: RNCC: 3 | RNVC: 2
P852715-001: RNCC: 5 | RNVC: 2

29 Nov 1992

5340-15-181-1751
Collare Superiore

151811751
179004377: RNCC: 3 | RNVC: 2
(241)A0199179004377: RNCC: 5 | RNVC: 2

5 Nov 2008

5340-15-120-0229
Mensola Proiettore

151200229
79034080: RNCC: 3 | RNVC: 2

5 Dec 1994

5340-15-114-0218
Arresto Meccanico

151140218
000204483400: RNCC: 5 | RNVC: 2
000204483400: RNCC: 5 | RNVC: 9

15 Apr 1992

5340-15-089-2033
Fascetta

150892033
814314: RNCC: 3 | RNVC: 2
1304-2C69: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-007-9139
Resilient Mount

150079139
1396706: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-089-1476
Gancio

150891476
6006844: RNCC: 3 | RNVC: 2
6006844: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-112-8540
Camicia

151128540
469147: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-178-4934
Dust And Moisture Seal Protective Cap

151784934
308190-008: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-109-1256
Resilient Mount

151091256
60126672: RNCC: 3 | RNVC: 2

30 Apr 1988

5340-15-051-3667
Collare

150513667
4038032: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-068-1949
Gruppo Staffaggio

150681949
644632: RNCC: 3 | RNVC: 2
644632: RNCC: 5 | RNVC: 9

27 Feb 1986

5340-15-205-1149
Closing Block Conne

152051149
131-0003 ITEM 58: RNCC: 3 | RNVC: 2
21310106: RNCC: 3 | RNVC: 2

21 Feb 2012

5340-15-185-7239
Ruote Pivottanti

151857239
521106: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-149-3135
Dust And Moisture Seal Protective Cap-Plug

151493135
4886042: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-203-0381
Piastra

152030381
033090088: RNCC: 3 | RNVC: 2
(241)A5009033090088: RNCC: 5 | RNVC: 2

19 Nov 2007

5340-15-207-4402
Cross Member (Upper

152074402
02451030: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-15-074-4289
Turnbuckle

150744289
2A30UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-074-4438
Turnbuckle

150744438
2B10UNI2021ZNMANIC0TT00T: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-136-2806
Tappo Per Ruotismi

151362806
2220044: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-066-7264
Handwheel

150667264
367435: RNCC: 2 | RNVC: 2

11 Jul 1996

5340-15-052-0419
Morsetto Serratubi

150520419
B740-20-15A: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-128-2741
Handwheel

151282741
5177: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-193-4654
Dust And Moisture Seal Protective Plug

151934654
341-8066/01: RNCC: 3 | RNVC: 2

17 May 2010

5340-15-136-7861
Clamp

151367861
MS21919BH10: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-113-2401
Staffacomplessivo

151132401
252A2313-403: RNCC: 3 | RNVC: 2

11 Apr 1991

5340-15-153-1579
Staffetta Serrafili

151531579
N263000100: RNCC: 3 | RNVC: 2

7 Dec 2000

5340-15-111-6011
Holder

151116011
A12161-01-20: RNCC: 3 | RNVC: 2
A12161-01-20: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-004-7631
Escutcheon Plate

150047631
27045-101A1: RNCC: 3 | RNVC: 2

10 Apr 1978

5340-15-206-5771
Corrosion Preventive Anode

152065771
F1-2: RNCC: 3 | RNVC: 2
(241)AJ578F1-2: RNCC: 5 | RNVC: 2

26 Jun 2012

5340-15-063-3219
Double Angle Bracket

150633219
60107879: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-188-1416
Electronic Equipment Hardware Kit

151881416
812837: RNCC: 3 | RNVC: 2

16 Jul 2009

5340-15-066-2553
Dust And Moisture Seal Protective Cap

150662553
211.903: RNCC: 3 | RNVC: 2

17 Feb 1986

5340-15-210-9341
Serratura Elettroni

152109341
TECNOKEY3: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-007-3725
Fascetta Speciale

150073725
0-33820: RNCC: 3 | RNVC: 2
00033820: RNCC: 4 | RNVC: 1
10441290 TAB.14560: RNCC: 5 | RNVC: 2
(241)A396300033820: RNCC: 5 | RNVC: 2

10 Apr 1979

5340-15-163-1722
Support

151631722
9617540080: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-154-1821
Albero

151541821
134247: RNCC: 3 | RNVC: 2

27 Mar 2001

5340-15-211-9640
Serratura Di Sicure

152119640
B007045003: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-212-0182
Fischietto In Metal

152120182
FISCHIETTOMETALLO: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-153-2532
Turnbuckle Body

151532532
122605206: RNCC: 2 | RNVC: 3

12 Dec 2000

5340-15-155-4938
Rubber Support Righ

151554938
CBD71130P08: RNCC: 3 | RNVC: 2

28 Mar 2002

5340-15-193-0747
Hatc Hinge Assembly

151930747
N523G5168102: RNCC: 3 | RNVC: 2
(241)A0126N523G5168102: RNCC: 5 | RNVC: 2
10340139: RNCC: 6 | RNVC: 9

12 Apr 2010

5340-15-215-3886
Cilindro Mm.6025-25

152153886
CILINDRO60MM.: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-067-8857
Innesto Manovella

150678857
53.358: RNCC: 3 | RNVC: 2
53.358: RNCC: 3 | RNVC: 2

31 May 1986

5340-15-160-1110
Serratura

151601110
F720109621: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-114-4749
Gruppoattaccodiestr

151144749
SMG18.40: RNCC: 3 | RNVC: 2
SMG18.40: RNCC: 5 | RNVC: 9

21 May 1993

5340-15-104-8870
Fissaggio Gaffetta

151048870
4521863: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-112-8528
Premib

151128528
471845: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-118-3067
Cerniera Complessiv

151183067
142520910: RNCC: 3 | RNVC: 2

11 May 1994

5340-15-002-2878
Dust And Moisture Seal Protective Plug

150022878
109747: RNCC: 3 | RNVC: 2

5 Aug 2013

5340-15-220-0460
Pann.Basso 2400Hx42

152200460
S1-69: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-064-8520
Double Angle Bracket

150648520
60114300: RNCC: 3 | RNVC: 2

17 Nov 1983

5340-15-204-9582
Riduzione

152049582
647000000218: RNCC: 3 | RNVC: 2
(241)AK137647000000218: RNCC: 5 | RNVC: 2

2 Feb 2012

5340-15-127-4487
Anello

151274487
1740-16-005: RNCC: 3 | RNVC: 2
1740-16-005: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-148-8589
Pomello Leva

151488589
101-04-01: RNCC: 3 | RNVC: 2
101-05-09: RNCC: 3 | RNVC: 2
F00052: RNCC: 3 | RNVC: 2

13 Oct 1998

5340-15-213-8526
Contropiastra In Ac

152138526
038031: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-155-2716
Resilient Mount

151552716
60171740: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-15-155-7192
Inserto Non Filetta

151557192
A254AP08D1: RNCC: 3 | RNVC: 2

29 May 2002

5340-15-149-0608
Paracolpo Gomma

151490608
970990: RNCC: 3 | RNVC: 2
(241)A3593970990: RNCC: 5 | RNVC: 2

23 Nov 1998

5340-15-215-3924
Quadro Per Maniglia

152153924
0125177: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-115-7127
Flangia Tubo Misura

151157127
D1401089: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-15-127-5021
Staffetta Elastica

151275021
864779: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-001-8589
Molla Valvola

150018589
AC600-128: RNCC: 3 | RNVC: 2
AC600-128: RNCC: 5 | RNVC: 9

10 Apr 1974

5340-15-109-9683
Access Door

151099683
109-0640-50-107: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-15-054-0761
Spina Per Cerniera

150540761
260-18-12-21: RNCC: 3 | RNVC: 2
260-18-12-21: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-189-4929
Giunto

151894929
N4204-500M: RNCC: 3 | RNVC: 2

26 Feb 2010

5340-15-200-4560
Dust And Moisture Seal Protective Plug

152004560
V40518.00: RNCC: 3 | RNVC: 2
(241)A4447V40518.00: RNCC: 5 | RNVC: 2

23 Jan 2006

5340-15-199-4935
Helical Compression Spring Seat

151994935
312790F01: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-15-062-5454
Resilient Mount Plate

150625454
60105033: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-117-0604
Lame Gauche

151170604
73128971: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-166-4886
Schermo Ad Impugnat

151664886
38201: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-166-4913
Supporto Per Giravi

151664913
326521: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-007-9140
Resilient Mount

150079140
1391638: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-166-5074
Housing

151665074
31805001: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-215-4645
Confezione Inserti

152154645
CONFEZIONEINSERTI: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-005-5160
Resilient Mount

150055160
342727A: RNCC: 3 | RNVC: 2
4204831: RNCC: 5 | RNVC: 2
4204831: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-231-7550
Lucchetto Mm.50 "Co

152317550
110.50: RNCC: 3 | RNVC: 2

19 Jul 2007

5340-15-222-2274
Ang. Fissaggio 80X8

152222274
S1-110C: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-001-7232
Helical Compression Spring Seat

150017232
08-10-769-4P-C: RNCC: 3 | RNVC: 2

15 Jul 2013

5340-15-119-0188
Sealing Plug Assembly

151190188
70665726: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-206-5775
Corrosion Preventive Anode

152065775
FX4: RNCC: 3 | RNVC: 2
(241)A3121FX4: RNCC: 5 | RNVC: 2

26 Jun 2012

5340-15-003-1062
Manual Control Lever

150031062
182719085: RNCC: 3 | RNVC: 2
(241)A0199182719085: RNCC: 5 | RNVC: 2

25 Oct 2013

5340-15-109-3729
Pad Eye

151093729
5137-294-42: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-189-5353
Fascetta

151895353
STSTG001-28-22: RNCC: 3 | RNVC: 2

26 Feb 2010

5340-15-204-3004
Dust And Moisture Seal Protective Cap-Plug

152043004
N635G1103201: RNCC: 3 | RNVC: 2
(241)A0126N635G1103201: RNCC: 5 | RNVC: 2

19 Oct 2011

5340-15-003-1108
Pad Eye

150031108
182719639: RNCC: 3 | RNVC: 2
(241)A0199182719639: RNCC: 5 | RNVC: 2

25 Oct 2013

5340-15-117-5265
Cerniera (Meta) A N

151175265
66447-113A01: RNCC: 3 | RNVC: 2
66447-113A1: RNCC: 5 | RNVC: 2

8 Nov 1993

5340-15-122-0445
Clutch Withd Sleeve

151220445
A2442: RNCC: 3 | RNVC: 2

23 Apr 1996

5340-15-058-6064
Guida Per Cassetti

150586064
1971-99: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-200-7791
Resilient Mount

152007791
1R 343428LA: RNCC: 3 | RNVC: 2
(241)A01061R 343428LA: RNCC: 5 | RNVC: 2

26 Feb 2006

5340-15-192-3763
Electronic Equipment Hardware Kit

151923763
3097001-00: RNCC: 3 | RNVC: 2
S943M30E1001: RNCC: 5 | RNVC: 2
S943M30A1001: RNCC: 5 | RNVC: 2

10 Mar 2010

5340-15-204-7568
Dust And Moisture Seal Boot

152047568
109-0110-79-101: RNCC: 3 | RNVC: 2

22 Dec 2011

5340-15-163-2817
Dust And Moisture Seal Protective Plug

151632817
8990.047: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-105-9136
Headless Straight Rod

151059136
8529569: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-201-4726
Dust And Moisture Seal Protective Cap

152014726
BFY2B100626: RNCC: 3 | RNVC: 2
BFY2B100626: RNCC: 5 | RNVC: 2
(241)A0126BFY2B100626: RNCC: 5 | RNVC: 2

27 Sep 2006

5340-15-219-8747
Kit Per Tracciare F

152198747
10 MT: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-166-5096
Assieme Coperchio

151665096
3060141000: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-215-3352
Filtro Ricambio X M

152153352
FILTROMASCHERA: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-233-7759
P Maniglia Ad Arco

152337759
1500/IC/III-08.09.58-87: RNCC: 2 | RNVC: 2
534015E078131: RNCC: 5 | RNVC: 9

24 Aug 2007

5340-15-185-1433
Tassello Nylon Con

151851433
FU6X35R: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-053-7212
Giunto Flessibile

150537212
P7255-000-76460A1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-120-5132
Cap

151205132
P-175501-401/402-14E001-204/3: RNCC: 3 | RNVC: 2
P175501-401/402-14E001-204/3: RNCC: 5 | RNVC: 2

28 Jun 1995

5340-15-222-2311
Montante Ipe 400 L

152222311
S1-134D: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-001-1121
Dust And Moisture Seal Protective Cover

150011121
504328586: RNCC: 3 | RNVC: 2

31 May 2013

5340-15-074-4365
Turnbuckle

150744365
1C80UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-074-4033
Turnbuckle

150744033
2A12UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-105-5958
Staffa A Gomito

151055958
10744500: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-202-2308
Rod

152022308
233A1003-007: RNCC: 3 | RNVC: 2
(241)A0019233A1003-007: RNCC: 5 | RNVC: 2

13 Feb 2007

5340-15-142-6944
Zinco

151426944
21232000F: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-007-7855
Fascetta Ritenzione

150077855
1601005: RNCC: 3 | RNVC: 2

10 May 1980

5340-15-109-1814
Rubber Bumper

151091814
1391274: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-122-2427
Anchor Strap

151222427
80A035370: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-063-9233
Fascetta Speciale

150639233
2640-72005: RNCC: 3 | RNVC: 2
2640-72005: RNCC: 5 | RNVC: 9

6 Dec 1982

5340-15-045-0852
Control Rod

150450852
503-12-11: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-203-5093
Assieme Barretta

152035093
277A6273-403: RNCC: 3 | RNVC: 2
(241)A2142277A6273-403: RNCC: 5 | RNVC: 2

12 Feb 2008

5340-15-120-8975
Manual Control Handle

151208975
H-VSB150: RNCC: 3 | RNVC: 2
149458 FIND NO.S05: RNCC: 3 | RNVC: 2

4 Sep 1995

5340-15-025-0967

5340-15-025-0963

5340-15-174-7639
Serrapacco (C2020-1

151747639
68216-50/010: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-107-2124
Co Fascia Fissaggio

151072124
720496-01: RNCC: 3 | RNVC: 2
720496-01: RNCC: 5 | RNVC: 9

5 Jun 1989

5340-15-116-1161
Piastrina Di Blocca

151161161
DPR29491/1-139: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-151-1152
Assieme Staffa Di F

151511152
381-0342/01: RNCC: 3 | RNVC: 2

21 Mar 2000

5340-15-122-1306
Container D

151221306
A-39251-401: RNCC: 3 | RNVC: 2
A39251-401: RNCC: 3 | RNVC: 2

21 May 1996

5340-15-003-4112
Rubberinc 09 Bumper

150034112
OG.6: RNCC: 3 | RNVC: 2
(241)AJ796OG.6: RNCC: 5 | RNVC: 2

11 Nov 2013

5340-15-062-8583
Fascetta Speciale

150628583
0-15013: RNCC: 3 | RNVC: 2

9 Feb 1982

5340-15-220-4723
Catena Ottone

152204723
2-89: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-221-6981
Padlock

152216981
5340RN0605053: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-215-1227
Turnbuckle

152151227
EX4030RN0600202: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-130-3921
Handwheel

151303921
3083-1200-20: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-220-0427
Washer (Pdr Age If

152200427
UNI 6593-69 14: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-052-0114
Chiavistello

150520114
B910-20-43: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-147-9980
Base Dentata

151479980
129-0640-86-124: RNCC: 3 | RNVC: 2

4 Jun 1998

5340-15-007-5225
Cover Plate Access

150075225
1239-01-01-187: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-181-4304
Guarnizione Metalli

151814304
XS1663: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-055-5373
Compasso Per Porte

150555373
1971TAV89-2: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-197-8648
Dashpot

151978648
N523G50A4002: RNCC: 1 | RNVC: 2
289-1-1100: RNCC: 3 | RNVC: 2
N523G50A4001: RNCC: 5 | RNVC: 9

21 May 2004

5340-15-189-2672
Bouchon Couvercle

151892672
391802006: RNCC: 3 | RNVC: 2
0391802006: RNCC: 5 | RNVC: 2

10 Feb 2010

5340-15-045-4509
Collare

150454509
787-12-52: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-107-8811
Control Rod

151078811
4765609: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-149-2899
Supporto Albero Com

151492899
4861995: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-107-4220
Resilient Mount

151074220
V118MG: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-153-2877
I Destra Cerniera

151532877
122505311: RNCC: 2 | RNVC: 3

13 Dec 2000

5340-15-005-6475
Parapolvere Special

150056475
0-25151: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-175-3100
Tassello Di Nylon D

151753100
LIVIA19220: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-100-6023
Coppetta Di Rizzagg

151006023
54186: RNCC: 3 | RNVC: 2

14 Feb 1994

5340-15-117-0511
Bush Holder

151170511
490874: RNCC: 3 | RNVC: 2
D0490874: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-119-4501
Serratura Elettrica

151194501
5851-0001: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-15-162-0663
End Cap

151620663
291A07130-103: RNCC: 3 | RNVC: 2

28 Dec 2000

5340-15-176-9604
Angolare

151769604
205-030-209-067: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-112-2568
Piastradic

151122568
277A1856-001: RNCC: 3 | RNVC: 2

10 Mar 1991

5340-15-113-4682
Piastrina

151134682
129-0110-91-103: RNCC: 3 | RNVC: 2

17 Jun 1991

5340-15-113-4820
Cernierasportello

151134820
113A6022-012: RNCC: 3 | RNVC: 2

29 Jun 1991

5340-15-220-0536
Trave Collegamento

152200536
S1-137F: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-110-2064
Semicernieraspecial

151102064
109-0311-67-103: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-15-064-6821
Washer

150646821
92511108: RNCC: 3 | RNVC: 2
92511108: RNCC: 5 | RNVC: 9

10 Jun 1984

5340-15-137-3243
Cerniera Compl.

151373243
S6151-50525-81: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-151-7558
Fitting Rod

151517558
J52850401-002: RNCC: 3 | RNVC: 2

5 Jul 2000

5340-15-113-2521
Leva Pompa M Staffa

151132521
351A4520-403: RNCC: 3 | RNVC: 2

11 Apr 1991

5340-15-219-8745
Kit Pulizia Comp.Di

152198745
SERIE-PULIZIA: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-231-0656
Piastrina Di Sicure

152310656
00260PMPN: RNCC: 3 | RNVC: 2
534015E135654: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-231-6628
Taschina Compl.

152316628
0-130020: RNCC: 3 | RNVC: 2
534015E151192: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-123-1414
Staffa

151231414
8572486: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-233-2578
Ruota Con Supporto

152332578
922: RNCC: 3 | RNVC: 2

19 Jul 2007

5340-15-103-1547
Control Rod

151031547
L5200163: RNCC: 3 | RNVC: 2
DE160.03.334: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-142-2609
Catenella

151422609
GB352-412-100: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-119-6763
Eye Hook

151196763
630606-10: RNCC: 3 | RNVC: 2
630606-10: RNCC: 5 | RNVC: 9

19 Oct 1994

5340-15-119-7529
Insert

151197529
P-160501-401/402-12C001-1206: RNCC: 3 | RNVC: 2
P160501-401/402-12C001-1206: RNCC: 5 | RNVC: 2

17 Nov 1994

5340-15-122-1367
Safety Assy

151221367
A-39067-401: RNCC: 3 | RNVC: 2
A39067-401: RNCC: 3 | RNVC: 2

21 May 1996

5340-15-116-6211
Dust And Moisture Seal Protective Plug

151166211
DPR 23424/1-16: RNCC: 3 | RNVC: 2

20 Nov 1993

5340-15-009-2610
Corpo Chiavestello

150092610
P-882737-004: RNCC: 3 | RNVC: 2

20 Aug 1980

5340-15-199-8373
Piastrina Di Rinfor

151998373
109-0340-86-27: RNCC: 3 | RNVC: 2
(241)A0126109-0340-86-27: RNCC: 5 | RNVC: 2

14 Jun 2005

5340-15-166-5115
Lucchetto Cisa Da 6

151665115
CISA60: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-121-1823
Shock Mount Pad

151211823
124453: RNCC: 3 | RNVC: 2

31 Jan 1996

5340-15-149-2212
Sliding Shoe

151492212
106332: RNCC: 3 | RNVC: 2

23 Dec 1998

5340-15-139-4162
Tirante

151394162
4638530: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-127-5522
Molla

151275522
885119: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-054-1744
Semicerniera Su Ala

150541744
260-18-17-10: RNCC: 3 | RNVC: 2
260-18-17-10: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-006-0270
Pad Eye

150060270
1127-97-332: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-149-3984
Support

151493984
518-05-0180: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-15-209-3300
Staffa X Tvcc

152093300
MOD.SI-4330: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-103-0928
Resilient Mount

151030928
L8635096: RNCC: 3 | RNVC: 2
(241)A5015DE160.03.163: RNCC: 5 | RNVC: 2
DE160.03.163: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-122-3653
Anello Di Guida Per

151223653
D1411814: RNCC: 3 | RNVC: 2

8 Jun 2000

5340-15-137-4406
Padlock

151374406
50014039: RNCC: 3 | RNVC: 2
50014039: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-201-6628
Rubber Bumper

152016628
N523G5239201: RNCC: 3 | RNVC: 2
(241)A0126N523G5239201: RNCC: 5 | RNVC: 2

9 Nov 2006

5340-15-118-7231
Helical Compression Spring Seat

151187231
9929609: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-153-0277
Seat Pipe Support

151530277
66321F91: RNCC: 3 | RNVC: 2

15 Nov 2000

5340-15-006-2547
Raschiatore Special

150062547
0-28872: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-153-4025
Elettro-Me Raccordo

151534025
5137-351-13: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-162-3320
Cable Clamp Assembl

151623320
D1217893: RNCC: 3 | RNVC: 2

27 Jun 2001

5340-15-220-2308
Astina In Alluminio

152202308
ASTINA: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-074-4042
Turnbuckle

150744042
2A45UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-205-8830
Speciale Flangia

152058830
9AA5010A101-001: RNCC: 3 | RNVC: 2
(241)A21429AA5010A101-001: RNCC: 5 | RNVC: 2

12 Apr 2012

5340-15-188-4578
Supporto Motore Ele

151884578
GB 263-051-056: RNCC: 3 | RNVC: 2
(241)A3789GB263-051-056: RNCC: 5 | RNVC: 2

15 Sep 2009

5340-15-187-7345
Rod

151877345
J28042146-001: RNCC: 3 | RNVC: 2
(241)A0019J28042146-001: RNCC: 5 | RNVC: 2

5 May 2009

5340-15-065-2030
Turnbuckle Assembly

150652030
192-0882/12: RNCC: 3 | RNVC: 2

7 Sep 1984

5340-15-202-2309
Rod

152022309
233A1003-009: RNCC: 3 | RNVC: 2
(241)A0019233A1003-009: RNCC: 5 | RNVC: 2

13 Feb 2007

5340-15-163-1234
Support

151631234
1310345080: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-068-2323
Anchor Strap

150682323
W011559: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-105-8901
Pattino Metallico

151058901
002.2311.0: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-212-0793
Catenaccio A Coda C

152120793
ART. 27: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-153-7769
Morsetto (1) A Serr

151537769
06100A106490: RNCC: 5 | RNVC: 2
06100A106490: RNCC: 5 | RNVC: 9

28 Feb 2001

5340-15-153-6015
Base (1) Per Sosteg

151536015
142024138: RNCC: 3 | RNVC: 2

16 Feb 2001

5340-15-112-5240
Handle

151125240
01TC22551: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-209-0112
Deflettor

152090112
N2843: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-170-3076
Bracket

151703076
321224-G1: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-201-6618
Re Bracket Assembly

152016618
N008G1017101: RNCC: 3 | RNVC: 2
(241)A0126N008G1017101: RNCC: 5 | RNVC: 2

9 Nov 2006

5340-15-120-1220
Guide

151201220
518-04-0230: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-15-065-1232
Manual Control Handle

150651232
B515/M-CA-053: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-150-7461
Gearbox Mounting Ru

151507461
017712: RNCC: 3 | RNVC: 2

20 Dec 1999

Load More Results