What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 30 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 30 of 72

5340-15-007-2687
Perno Speciale

150072687
1384780: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-117-0040
Lame Droite Assembl

151170040
79043584: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-112-8225
Coperchio

151128225
466395: RNCC: 3 | RNVC: 2
D0466395: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-139-3235
Tirante

151393235
1390743: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-149-3953
Support

151493953
2300-99189: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-15-149-3696
Locking Lever

151493696
2300-91409: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-15-157-3914
Half-Hinge

151573914
190509369: RNCC: 2 | RNVC: 3

4 Jul 2003

5340-15-163-1195
Clip

151631195
1325971080: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-147-5795
Plug

151475795
98RV451: RNCC: 3 | RNVC: 2

30 Dec 1997

5340-15-204-5918
Paracolpo Gomma

152045918
WMP053000682: RNCC: 3 | RNVC: 2
WMP053000682V03: RNCC: 3 | RNVC: 2
(241)A2309WMP053000682: RNCC: 5 | RNVC: 2
(241)A2309WMP053000682V03: RNCC: 5 | RNVC: 2

22 Nov 2011

5340-15-116-2716
Semiflangia

151162716
190521239: RNCC: 3 | RNVC: 2

15 Apr 1993

5340-15-041-8024
Calzatura Filettata

150418024
4-3351-201-41865: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-170-3596
Clip

151703596
206-031-427-17: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-127-4282
Staffetta

151274282
1-04195-01: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-068-2143
Metal Runner

150682143
27453-002A2: RNCC: 3 | RNVC: 2

26 Mar 1986

5340-15-068-4481
Chiavistello

150684481
NOR2-424-00-07-14: RNCC: 3 | RNVC: 2

2 Jul 1986

5340-15-111-6015
Holder

151116015
A05382-01-20: RNCC: 3 | RNVC: 2
A05382-01-20: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-113-0850
Speciale Supporto

151130850
91143-101A1: RNCC: 3 | RNVC: 2

9 May 1991

5340-15-213-8270
Squadretta In Telai

152138270
18-1160: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-103-5673
Corrosion Preventive Anode

151035673
A2-PN10-M20: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-158-5241
Control Rod

151585241
263A1878-423: RNCC: 3 | RNVC: 2

1 Mar 2004

5340-15-154-1444
Assieme Asta

151541444
0-115125: RNCC: 3 | RNVC: 2
1PA39630-115125: RNCC: 5 | RNVC: 2
(241)A39630-115125: RNCC: 5 | RNVC: 2

22 Mar 2001

5340-15-206-7097
Pin Assy

152067097
109-3000-03-105: RNCC: 3 | RNVC: 2

4 Jul 2012

5340-15-213-8103
Maniglia Per Manigl

152138103
59000-10-00: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-206-2988
Holder

152062988
GP3859: RNCC: 3 | RNVC: 2

1 Jun 2012

5340-15-156-2009
Base

151562009
(241)A3460CBD71171P01: RNCC: 3 | RNVC: 2
CBD71171P01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-166-4959
Hinge Ass

151664959
252A1036001: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-114-7587
Later Plate

151147587
01TL20453-03: RNCC: 3 | RNVC: 2

4 Aug 1992

5340-15-189-2199
Handle

151892199
ICMAN12: RNCC: 3 | RNVC: 2

9 Feb 2010

5340-15-149-6743
Rod Re Clip-Clevis

151496743
8C0071276: RNCC: 3 | RNVC: 2

15 Apr 1999

5340-15-217-7884
Lama Utensile Attes

152177884
C9901/1: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-186-3913
Braccio Per Apertur

151863913
B2265133: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-185-7156
Ruota Girevole

151857156
684500: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-232-2958
Resilient Mount

152322958
9130013: RNCC: 3 | RNVC: 2
(241)A50099130013: RNCC: 5 | RNVC: 2
534015E138576: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-113-6054
Cover M Pin

151136054
AC120565-1/3-1: RNCC: 3 | RNVC: 2

20 Jan 1992

5340-15-109-8498
Assieme Supporto

151098498
220321/1: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-231-0606
Impugnatura Perno D

152310606
SCV001150-4-6: RNCC: 3 | RNVC: 2
534015E119462: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-160-0011
Lucchetto C.

151600011
F720116231: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-215-0716
Assortimento Insert

152150716
A1593/4: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-062-1353
Bracket

150621353
4-21816-002C: RNCC: 5 | RNVC: 2
21816.0002: RNCC: 5 | RNVC: 2
4-21816-002C: RNCC: 5 | RNVC: 9
21816.0002: RNCC: 5 | RNVC: 9

6 Dec 1980

5340-15-151-4222
Cerniera

151514222
0-121877: RNCC: 3 | RNVC: 2
(241)A39630-121877: RNCC: 5 | RNVC: 2

24 May 2000

5340-15-045-4218
Fascetta

150454218
N0R2-505-05B: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-117-8167
Kit 300Hrs

151178167
109-3900-19-115: RNCC: 3 | RNVC: 2

28 Jan 1994

5340-15-003-6055
Anello

150036055
45-3248-11: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-177-5869
Adapter

151775869
COL56/16-06: RNCC: 3 | RNVC: 2

13 May 2004

5340-15-101-2960
Slide Telescopio

151012960
285014P3: RNCC: 3 | RNVC: 2
71-02-006-025: RNCC: 5 | RNVC: 2

30 Jan 1988

5340-15-121-3238
Dust And Moisture Seal Protective Cap

151213238
837939-10: RNCC: 3 | RNVC: 2
837939-10: RNCC: 5 | RNVC: 9

7 Nov 1995

5340-15-194-8735
Ring

151948735
3137873: RNCC: 3 | RNVC: 2
10/906495: RNCC: 5 | RNVC: 2

27 Jan 2011

5340-15-107-7772
Maniglia.Complessiv

151077772
140-0584/01: RNCC: 3 | RNVC: 2

9 Jun 1989

5340-15-111-6951
Bracket

151116951
232-167/60: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-178-5862
Hydraulic Oi Cooler

151785862
A20IAP-24VCC/FR633030020: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-204-0456
Modular Block

152040456
G386038010: RNCC: 3 | RNVC: 2

23 Aug 2011

5340-15-106-4959
Fermapentole Comple

151064959
1500/IC/III-08.09.58-37-US: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-113-7944
Cerniera Portello A

151137944
129-0640-57-102: RNCC: 3 | RNVC: 2

27 Feb 1992

5340-15-161-9982
Accumulator Pocket

151619982
S55P1: RNCC: 3 | RNVC: 2

15 Nov 2000

5340-15-170-9318
Resilient Mount

151709318
504079677: RNCC: 3 | RNVC: 2

17 Jun 2003

5340-15-115-1579
Diaphragm

151151579
05/725/001: RNCC: 5 | RNVC: 2
05/725/001: RNCC: 5 | RNVC: 9
05/725/001: RNCC: 5 | RNVC: 9

29 Nov 1992

5340-15-155-3176
Resilient Mount

151553176
60189114: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-15-135-0324
Retainer

151350324
740007: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-112-2901
Scatola Assieme

151122901
262A1241-405: RNCC: 3 | RNVC: 2

10 Apr 1991

5340-15-127-5510
Molla Indur.Comando

151275510
884647: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-147-9659
Cappuccio Protezion

151479659
T3.01.00.005: RNCC: 3 | RNVC: 2

27 May 1998

5340-15-221-4561
Lucchetto Yale Cm5

152214561
EX5340RI7423064: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-122-5505
Cable Brake

151225505
01TL21272: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-136-6538
Knurled Catch Stud

151366538
PC21202-4: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-151-5397
Twist-Lock

151515397
0-119137: RNCC: 3 | RNVC: 2
(241)A39630-119137: RNCC: 5 | RNVC: 2

6 Jun 2000

5340-15-040-8672
Forcella

150408672
2-0847-501-33404-1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-106-6823
Cofano Maniglia

151066823
5086-03-64: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-045-3360
Control Rod

150453360
591-12-20: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-112-8537
Obturator

151128537
471688: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-155-3169
Resilient Mount

151553169
60188988: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-15-053-7319
Staffa

150537319
640353: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-105-6371
Collare Serraggio

151056371
844297: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-214-8750
Staffa Di Supporto

152148750
STAFFA: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-139-2255
Piastra

151392255
76000224: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-051-4059
Staffa

150514059
4565532: RNCC: 3 | RNVC: 2
4565532: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-008-4800
Rubber Bumper

150084800
42002777: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-102-1057
Cinghia Speciale Co

151021057
192-0334/11: RNCC: 3 | RNVC: 2

22 Jun 1986

5340-15-065-7251
Piastra

150657251
109-0700-71-1: RNCC: 3 | RNVC: 2

16 Dec 1984

5340-15-063-7634
Hinge

150637634
F333A5-54: RNCC: 3 | RNVC: 2
F333A5-54: RNCC: 5 | RNVC: 2

30 May 1983

5340-15-150-4941
Cerniera Speciale

151504941
129-0380-10-102: RNCC: 3 | RNVC: 2

22 Nov 1999

5340-15-154-6361
Base (1) Per Sosteg

151546361
553006113000: RNCC: 2 | RNVC: 3
30-06-113: RNCC: 2 | RNVC: 3

31 Jul 2001

5340-15-062-1841
Plate Retaining

150621841
P-892602-001: RNCC: 3 | RNVC: 2
P892602-001: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-121-3392
Anello Per Frenatur

151213392
3594-10: RNCC: 3 | RNVC: 2
3594-10: RNCC: 5 | RNVC: 9

15 Nov 1995

5340-15-133-0618
Forcella

151330618
G6X12DIN71-752: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-108-9090
Strisciametallica

151089090
92887-101: RNCC: 3 | RNVC: 2

5 Oct 1989

5340-15-101-3731
Lamelle

151013731
5168-2: RNCC: 3 | RNVC: 2

13 Jun 1994

5340-15-120-6925
Manicotto Della Ast

151206925
D0468959: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-174-7472
Nastro 150X0.05Cu B

151747472
53630-01/001: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-009-5311
Bracket

150095311
4-21816-002C: RNCC: 5 | RNVC: 2
4-21816-002C: RNCC: 5 | RNVC: 9

6 Dec 1980

5340-15-006-4320
Nut And Bolt Locking Plate

150064320
1-41987-11: RNCC: 3 | RNVC: 2
1-41987-11: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-122-1043
Blocchetto Metallic

151221043
D1407683: RNCC: 3 | RNVC: 2

27 Sep 1996

5340-15-116-2775
Speciale Tappo

151162775
190518160: RNCC: 3 | RNVC: 2

15 Apr 1993

5340-15-067-4828
Handwheel

150674828
009-262174: RNCC: 2 | RNVC: 2
009-262174: RNCC: 5 | RNVC: 9

11 Feb 1986

5340-15-122-5535
Fork Bush

151225535
01TL21211-03: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-175-8770
Lucchetto Corazzato

151758770
L2019000: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-149-3991
Roller

151493991
518-33-1380: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-15-186-0963
Morsetto Da 10

151860963
MORSETTO-10: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-051-9850
Resilient Mount

150519850
7723815: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-001-5482
Stand Base

150015482
182719573: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-15-110-1870
Supporto Per Spinet

151101870
69B2035: RNCC: 3 | RNVC: 2
69A2035: RNCC: 5 | RNVC: 2

9 May 1990

5340-15-147-6963
Dust And Moisture Seal Protective Plug

151476963
3XTAP822150: RNCC: 3 | RNVC: 2

3 Mar 1998

5340-15-119-7548
Grip

151197548
P-160503-401/402-12C001-705: RNCC: 3 | RNVC: 2
P160503-401/402-12C001-705: RNCC: 5 | RNVC: 2

17 Nov 1994

5340-15-220-0474
Supporto Sx Angolar

152200474
S1-91B: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-045-3699
Clamp Half

150453699
748-12-01: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-052-1963
Colonnina Di Stanz

150521963
8-019-009: RNCC: 3 | RNVC: 2
8-019-009: RNCC: 5 | RNVC: 9
8-019-009: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-059-4360
Control Rod

150594360
109-0011-34-3: RNCC: 3 | RNVC: 2

4 Jan 1976

5340-15-105-6148
Buckle

151056148
2/20538-20.03.68-05: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-170-3497
Plate Assembly

151703497
206-001-738-2: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-178-4931
Dust And Moisture Seal Protective Cap

151784931
308190-005: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-200-5370
Gruppo Adattatori M

152005370
1188.100-01: RNCC: 3 | RNVC: 2
(241)A30931188.100-01: RNCC: 5 | RNVC: 2

29 Jan 2006

5340-15-154-1044
Double Angle Bracket

151541044
00150070: RNCC: 3 | RNVC: 2
0-150070: RNCC: 3 | RNVC: 2
(241)A39630-150070: RNCC: 5 | RNVC: 2
1PA39630-150070: RNCC: 5 | RNVC: 2

21 Mar 2001

5340-15-113-2072
Seat Pipe Support

151132072
772304: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-102-2811
Cerniera Correttore

151022811
66-3303-15: RNCC: 3 | RNVC: 2

8 Feb 1988

5340-15-170-8065
Manicotto Segnacavo

151708065
340-0542/04: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-068-7893
Control Rod

150687893
4582135: RNCC: 3 | RNVC: 2

27 May 1985

5340-15-148-6413
Volantino

151486413
190512030: RNCC: 3 | RNVC: 2

17 Sep 1998

5340-15-137-1269
Rosetta

151371269
74529: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-120-1632
Dust And Moisture Seal Protective Cap-Plug

151201632
836512-10: RNCC: 3 | RNVC: 2
836512-10: RNCC: 5 | RNVC: 9

17 Jan 1995

5340-15-101-9384
Chiusura Complessiv

151019384
01-261-12-011: RNCC: 3 | RNVC: 2

30 Apr 1987

5340-15-151-9310
Plastic Bumper

151519310
008188516: RNCC: 3 | RNVC: 2
008188516: RNCC: 4 | RNVC: 1
(241)A39630-113945: RNCC: 5 | RNVC: 2
0-113945: RNCC: 5 | RNVC: 2
(241)A396300113945: RNCC: 5 | RNVC: 2

26 Jul 2000

5340-15-000-3550
Placca 3F Per Prese

150003550
6644 4 114-013F: RNCC: 3 | RNVC: 2

25 Feb 2013

5340-15-213-8834
Serratura Da Infila

152138834
704-70-1-0: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-120-7175
Manual Control Handle

151207175
555910136000: RNCC: 3 | RNVC: 2
559-10-1360: RNCC: 3 | RNVC: 2

31 Jul 1995

5340-15-122-5573
Top Door

151225573
01TL21030-01: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-108-6596
Dust And Moisture Seal Protective Cap

151086596
736328-10: RNCC: 3 | RNVC: 2
736328-10: RNCC: 5 | RNVC: 9

2 May 1987

5340-15-115-1964
Spring Clip

151151964
9-1240-001: RNCC: 3 | RNVC: 2
82-00781: RNCC: 5 | RNVC: 2

29 Nov 1992

5340-15-055-3864
Manicotto Speciale

150553864
50741-14: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-007-3410
Anello Laterale Spe

150073410
0-28461: RNCC: 3 | RNVC: 2
(241)A39630-28461: RNCC: 5 | RNVC: 2

10 Apr 1979

5340-15-118-0366
Cuneo Di Blocco Per

151180366
D0471372: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-15-115-6961
Anello Antifrizione

151156961
LRC 4125: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-003-8940
Headless Straight Rod

150038940
182703140: RNCC: 3 | RNVC: 2
(241)A0199182703140: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-120-2599
Dust And Moisture Seal Protective Cap

151202599
145503162: RNCC: 3 | RNVC: 2

8 Mar 1995

5340-15-112-8612
Headless Grooved Rod

151128612
471838: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-189-5355
Fascetta

151895355
STSTG001-32-07: RNCC: 3 | RNVC: 2

26 Feb 2010

5340-15-116-1585
Piastrinadibloccagg

151161585
DPR23780/3-155: RNCC: 3 | RNVC: 2

13 Oct 1993

5340-15-145-1779
Shock Absorber

151451779
1230-32-145: RNCC: 3 | RNVC: 2

2 Jun 1997

5340-15-232-9270
Ser Saliscendi Tipo

152329270
9999-10056: RNCC: 3 | RNVC: 2
91/909: RNCC: 3 | RNVC: 2
534015E129605: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-200-5371
Adattatore

152005371
1188.023-01: RNCC: 3 | RNVC: 2
(241)A30931188.023-01: RNCC: 5 | RNVC: 2

29 Jan 2006

5340-15-150-4497
Struttura Speciale

151504497
30601-30000: RNCC: 3 | RNVC: 2

11 Nov 1999

5340-15-193-9606
Protection

151939606
109-0881-12-115: RNCC: 3 | RNVC: 2

3 Aug 2010

5340-15-148-7513
Piastra

151487513
2203-0006-001: RNCC: 3 | RNVC: 2

30 Sep 1998

5340-15-127-4363
Distanziale Bullone

151274363
1740-45-103: RNCC: 3 | RNVC: 2
1740-45-103: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-117-2271
Tasselloammortizzan

151172271
G6: RNCC: 3 | RNVC: 2

30 May 1994

5340-15-149-2879
Flangia Collegament

151492879
4855522: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-105-6044
Eye Hook

151056044
12.504.969: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-193-0163
Tampone Ammortizzat

151930163
60191128: RNCC: 3 | RNVC: 2
(241)A424960191128: RNCC: 5 | RNVC: 2

6 Apr 2010

5340-15-058-5123
Nut And Bolt Retainer

150585123
C241094C: RNCC: 5 | RNVC: 2
C241094C: RNCC: 5 | RNVC: 9

20 Sep 1974

5340-15-065-0151
Helical Compression Spring Seat

150650151
03-618-A-3: RNCC: 1 | RNVC: 3
(7001)5340150650151: RNCC: 3 | RNVC: 2
52623: RNCC: 3 | RNVC: 2

16 Aug 1983

5340-15-068-1348
Metal Runner

150681348
27452-001A1: RNCC: 3 | RNVC: 2

26 Mar 1986

5340-15-127-4406
Molla

151274406
1740-17-010: RNCC: 3 | RNVC: 2
1740-17-010: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-116-7128
Elementobloccaggio

151167128
DAC2200A001-001: RNCC: 3 | RNVC: 2

23 Jun 1993

5340-15-204-1856
Cordoncino

152041856
1,78-NBR-A70-SCHWARZ: RNCC: 3 | RNVC: 2
(241)A15791,78-NBR-A70-SCHWARZ: RNCC: 5 | RNVC: 2

21 Sep 2011

5340-15-188-0194
Nut And Bolt Locking Plate

151880194
5387-GI-15-11-6-3-1-22: RNCC: 3 | RNVC: 2
(241)A53875387-GI-15-11-6-3-1-22: RNCC: 5 | RNVC: 2

17 Jun 2009

5340-15-205-0913
Threaded End Tensioning Tie Rod

152050913
482700000/144: RNCC: 3 | RNVC: 2
(241)A0199482700000/144: RNCC: 5 | RNVC: 2

17 Feb 2012

5340-15-189-8323
Gaino A Leva

151898323
GAINO160/180: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-148-9300
Ritegno Speciale Pe

151489300
2206-0023-001: RNCC: 3 | RNVC: 2

2 Nov 1998

5340-15-209-0191
Insert

152090191
761-0538-002: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-191-6372
Protective Cap

151916372
ECS 194-505-9003: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-178-5326
Manual Control Handle

151785326
165-09: RNCC: 3 | RNVC: 2
165-09: RNCC: 5 | RNVC: 9

1 Jul 2005

5340-15-059-0040
Control Rod

150590040
53511-030: RNCC: 3 | RNVC: 2

25 Aug 1975

5340-15-220-8485
Maniglione Pusch 94

152208485
PUSCH944: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-154-0992
Piastra

151540992
0-160947: RNCC: 3 | RNVC: 2
(241)A39630-160947: RNCC: 5 | RNVC: 2
1PA39630-160947: RNCC: 5 | RNVC: 2

20 Mar 2001

5340-15-121-6297
Arretoir

151216297
800035735: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-108-7922
Packing

151087922
5060507: RNCC: 3 | RNVC: 2

10 Apr 1990

5340-15-129-5542
Ring

151295542
SEEGER121: RNCC: 3 | RNVC: 2
SEEGER121: RNCC: 5 | RNVC: 9

9 Oct 1996

5340-15-213-8237
Rullo Ottagonale Fe

152138237
2220-FZO: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-121-6182
Guide Cable

151216182
80A046427: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-005-2601
Rubbe Bumper Strip

150052601
109-0616-71-12: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-102-8824
Helical Compression Spring Seat

151028824
1P509064: RNCC: 3 | RNVC: 2
1P509064: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-108-1409
Turnbuckle Body

151081409
109-0630-42-1: RNCC: 3 | RNVC: 2

15 Jul 1987

5340-15-151-9382
Double Angle Bracket

151519382
0-172817: RNCC: 3 | RNVC: 2
00172817: RNCC: 3 | RNVC: 2
(241)A39630-172817: RNCC: 5 | RNVC: 2
1PA39630-172817: RNCC: 5 | RNVC: 2

26 Jul 2000

5340-15-114-9923
Sacchetto Da Mille

151149923
DN391-81-105: RNCC: 3 | RNVC: 2
DN391-81-105: RNCC: 3 | RNVC: 2
(7001)5340151149923: RNCC: 5 | RNVC: 2

26 Feb 1993

5340-15-062-0698
Hinge

150620698
P882734-004: RNCC: 3 | RNVC: 2

27 Oct 1980

5340-15-178-4627
Nonmetallic Bumper

151784627
8790/13/29 ITEM14: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-180-9348
Speciale Leva

151809348
434A2082-001: RNCC: 3 | RNVC: 2
(241)A2142-434A2082-001: RNCC: 5 | RNVC: 2

20 Aug 2008

5340-15-065-8267
Comtrocoppa

150658267
2058/12/16: RNCC: 3 | RNVC: 2

4 Sep 1985

5340-15-150-5686
Special Tool Kit

151505686
146-0141/01: RNCC: 3 | RNVC: 2

1 Dec 1999

5340-15-114-4053
Braccio Snodato

151144053
204-8910-44-7: RNCC: 3 | RNVC: 2

19 May 1994

5340-15-053-5965
Boccola

150535965
83-0543-11: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-115-7172
Supporto Rullo

151157172
D1401172: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-15-179-9810
Support

151799810
504181930: RNCC: 3 | RNVC: 2

30 Oct 2007

5340-15-009-2644
Helical Compression Spring Retainer

150092644
P-882511-001: RNCC: 3 | RNVC: 2

23 Aug 1980

5340-15-000-8272
Corrosion Preventive Anode

150008272
2134-16: RNCC: 3 | RNVC: 2

11 Apr 2013

5340-15-220-0518
Montante 2 Hea 160

152200518
S1-138A: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-110-3820
Haltewinkel

151103820
F294B2-83: RNCC: 3 | RNVC: 2
F294B2-83: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-008-1369
Semiblocchetto Infe

150081369
A1-43018-003: RNCC: 3 | RNVC: 2
A1-43018-003: RNCC: 5 | RNVC: 9

22 Apr 1981

5340-15-170-8573
Lastra 544X358x0.6

151708573
58311-11/009: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-067-4496
Handwheel

150674496
020D3650-004P: RNCC: 2 | RNVC: 2
020D3650-004P: RNCC: 5 | RNVC: 9

5 Jun 2000

5340-15-055-6603
Staffa Ritegno

150556603
546207: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-119-5425
Piastrina Anteriore

151195425
D0481793: RNCC: 3 | RNVC: 2

24 Mar 1995

5340-15-231-5914
Fascetta

152315914
534015E074008: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-218-1037
Piastra Per Attacco

152181037
PIASTRA-PARANCO: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-195-7849
Tool Assy

151957849
109-3401-62-101: RNCC: 3 | RNVC: 2

10 May 2011

5340-15-231-0659
Staffetta Di Fissag

152310659
000271PMPN: RNCC: 3 | RNVC: 2
534015E136546: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-009-2133
Rubber Bumper

150092133
212-4100-16-1: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-153-1248
Dust And Moisture Seal Protective Cap-Plug

151531248
44200000067/15: RNCC: 3 | RNVC: 2

27 Nov 2000

5340-15-007-1803
Resilient Mount

150071803
1383792: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-156-3624
Spl Protection Assy

151563624
(241)A3460CBD71028G01: RNCC: 3 | RNVC: 2
CBD71028G01: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-008-3230
Handling Unit

150083230
MN4240216: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-174-7458
Tondo P-Ot58pb12h20

151747458
53240-02/061: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-107-9848
Bush

151079848
322-0010/48: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-068-1347
Metal Runner

150681347
27452-002A1: RNCC: 3 | RNVC: 2
27452-002A01: RNCC: 5 | RNVC: 2

26 Mar 1986

5340-15-174-7570
Brunitura P.C.S. Ma

151747570
59999-43/002: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-147-4588
Dust And Moisture Seal Protective Plug

151474588
PS701-6223: RNCC: 3 | RNVC: 2
PS701-6223: RNCC: 5 | RNVC: 2

1 Dec 1997

5340-15-154-6373
Base (1) Per Sosteg

151546373
538-05-1140: RNCC: 2 | RNVC: 3
553805114000: RNCC: 2 | RNVC: 3

31 Jul 2001

5340-15-114-7158
Control Rod

151147158
03-619-B-12: RNCC: 1 | RNVC: 3
(7001)5340151147158: RNCC: 3 | RNVC: 2
54600: RNCC: 3 | RNVC: 2

29 Jul 1992

5340-15-177-5868
Adapter

151775868
COL56/14-06: RNCC: 3 | RNVC: 2

13 May 2004

5340-15-151-9394
Staffa

151519394
00173851: RNCC: 3 | RNVC: 2
0-173851: RNCC: 3 | RNVC: 2
(241)A39630-173851: RNCC: 5 | RNVC: 2

26 Jul 2000

5340-15-122-9341
Anello Paraolio

151229341
212-040-147-1: RNCC: 3 | RNVC: 2

30 May 2000

5340-15-006-8961
Control Rod

150068961
39X501-12-34: RNCC: 3 | RNVC: 2

2 Jan 1979

5340-15-179-8065
Clamp

151798065
6-05-033: RNCC: 3 | RNVC: 2

3 Aug 2007

5340-15-057-3339
Electrical-Me Post

150573339
1127-27-124: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-052-0770
Control Rod

150520770
N0R5-220-00-330: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-071-4109
Handwheel

150714109
915: RNCC: 3 | RNVC: 2

1 May 1981

5340-15-110-5235
Screwed Plug

151105235
361.174: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-110-3729
Kupplungsstue

151103729
F294F2D-50: RNCC: 3 | RNVC: 2
F294F2D-50: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-054-1741
Semicerniera Su Por

150541741
260-18-17-9: RNCC: 3 | RNVC: 2
260-18-17-9: RNCC: 5 | RNVC: 9

2 Sep 1971

5340-15-166-4958
Attacco

151664958
AN743Z13: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-154-1763
Tappo Di Bloccaggio

151541763
130329: RNCC: 3 | RNVC: 2

27 Mar 2001

5340-15-206-8249
Manual Control Lever

152068249
500-009-00055: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-170-8591
Lastra Ptfe Vetro 2

151708591
58582-02/002: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-058-6062
Cerniera Ad Incasso

150586062
1971-69-15: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-178-5178
Flange

151785178
09092345: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-063-9194
Resilient Mount

150639194
AVAU706C143-65: RNCC: 3 | RNVC: 2
AVAU706C143-65: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-007-7840
Ammortizzatore

150077840
155-67230: RNCC: 3 | RNVC: 2

10 May 1980

5340-15-231-1131
Lucchetto Corazzato

152311131
28550/75: RNCC: 3 | RNVC: 2

19 Jul 2007

5340-15-156-7508
Padlock

151567508
0-122005: RNCC: 3 | RNVC: 2
1PA39630-122005: RNCC: 5 | RNVC: 2
(241)A39630-122005: RNCC: 5 | RNVC: 2

6 Mar 2003

5340-15-151-2154
Threaded End Tensioning Tie Rod

151512154
00085697: RNCC: 3 | RNVC: 2

28 Apr 2000

5340-15-118-9190
Double Angle Bracket

151189190
73147770: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-120-5596
Block

151205596
109-0323-22-2: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-15-103-2025
Piastra Speciale

151032025
DE160.02.090: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-115-1955
Lever

151151955
395-5200-271: RNCC: 3 | RNVC: 2
82-00771: RNCC: 5 | RNVC: 2

29 Nov 1992

5340-15-007-0768
Crociera Speciale

150070768
0-05642: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-188-9314
Piastra Fissaggio A

151889314
109-0134-18-101: RNCC: 3 | RNVC: 2

17 Dec 2009

5340-15-106-4960
Fermapentole Comple

151064960
1500/IC/III-08.09.58-37: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-120-5609
Screw Thread Insert

151205609
NY405-3: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-15-077-1456
Molla Per Contatto

150771456
P14-200-40A: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-020-2243
Staffa Per Carrucol

150202243
02-231E02-9: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-188-4759
Adjustable Foot

151884759
P-125001-831/832-12C001-107: RNCC: 3 | RNVC: 2

22 Sep 2009

5340-15-111-3451
Tubo Curvato Compl.

151113451
109-0020-03-1: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-15-187-5716
Dust And Moisture Seal Protective Cap-Plug

151875716
TAK-0156/01: RNCC: 3 | RNVC: 2

9 Apr 2009

5340-15-151-2706
Rail 0.7 M With Loc

151512706
8854114-141: RNCC: 3 | RNVC: 2

4 May 2000

5340-15-191-5906
Piastrina

151915906
P950339-421: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-052-4448
Resilient Mount

150524448
914-5-4-27-06727-007: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-074-4180
Turnbuckle

150744180
2A20UNI2019AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-231-9102
Tassello Elastico

152319102
7793944: RNCC: 3 | RNVC: 2
534015E113954: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-101-7840
Fascetta Speciale

151017840
SC32674.81D: RNCC: 3 | RNVC: 2

21 Jul 1987

5340-15-155-4940
Base

151554940
CBD71130P01: RNCC: 3 | RNVC: 2

28 Mar 2002

5340-15-005-6859
Fascetta Speciale

150056859
0-49243: RNCC: 3 | RNVC: 2

13 Aug 1979

5340-15-121-4345
Electrical-Me Post

151214345
553826144000: RNCC: 3 | RNVC: 2
538-26-1440: RNCC: 5 | RNVC: 2

17 Oct 1996

5340-15-006-8523
Fascia Di Fissaggio

150068523
N0R2-517-00-125-125: RNCC: 3 | RNVC: 2

2 Jan 1979

5340-15-040-2184
Cerniera

150402184
2-2255-100-24537: RNCC: 3 | RNVC: 2
2-2255-1-00-24537: RNCC: 5 | RNVC: 2

29 Sep 1975

5340-15-201-0098
Safety Handle

152010098
312P7571-01: RNCC: 3 | RNVC: 2

10 May 2006

5340-15-156-3892
Bracket

151563892
CBD71347P02: RNCC: 3 | RNVC: 2
(241)A3460CBD71347P02: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-179-3417
Cover

151793417
500370032: RNCC: 3 | RNVC: 2

28 Nov 2006

5340-15-005-6858
Fascetta Speciale

150056858
0-49075: RNCC: 3 | RNVC: 2
4637897: RNCC: 5 | RNVC: 2

13 Aug 1979

5340-15-213-8784
Serratura Da Infila

152138784
630-35-0: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-112-4263
Cover

151124263
170-0009/01: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-001-1068
Dust And Moisture Seal Protective Cap

150011068
504343879: RNCC: 3 | RNVC: 2

31 May 2013

5340-15-067-9671
Cappuccio

150679671
6.91.00.64.1: RNCC: 3 | RNVC: 2

8 Jul 1986

5340-15-166-4784
Blocchi 'S'

151664784
242203200065: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-112-2905
Guida Speciale

151122905
211A7139-403: RNCC: 3 | RNVC: 2

10 Apr 1991

5340-15-122-1310
Plate

151221310
A39235-001: RNCC: 3 | RNVC: 2
A-39235-001: RNCC: 3 | RNVC: 2

21 May 1996

5340-15-052-1098
Control Rod

150521098
503-12-11A: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-063-8184
Collare A Supporto

150638184
26751-02: RNCC: 3 | RNVC: 2

19 Jul 1983

5340-15-149-6096
Clamp

151496096
518-10-1380: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-134-4748
Perno Interno Rampa

151344748
22943-101: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-179-4825
Line Filter

151794825
873-4012-306: RNCC: 3 | RNVC: 2
M0017117: RNCC: 5 | RNVC: 2

22 Jan 2007

5340-15-065-9164
Cap

150659164
4723930: RNCC: 3 | RNVC: 2

22 Nov 1983

5340-15-184-9917
Tappo

151849917
2136596: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-121-6961
Protection

151216961
3439684: RNCC: 3 | RNVC: 2
3439684: RNCC: 5 | RNVC: 2

6 Feb 1996

5340-15-058-6565
Terminal

150586565
P200-23: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-118-1332
Collare Premiguarni

151181332
05135-001B00: RNCC: 3 | RNVC: 2

23 Mar 1994

5340-15-116-4843
Helical Compression Spring Seat

151164843
4833070: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-125-7483
Molla

151257483
4453449: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-195-9102
Mpu Mounting Frame

151959102
J04841801-003: RNCC: 3 | RNVC: 2
(241)A0019J04841801-003: RNCC: 5 | RNVC: 2

25 May 2011

5340-15-074-4158
Turnbuckle

150744158
2D27UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-062-2001
Knor

150622001
P-892857-401: RNCC: 3 | RNVC: 2
P892857-401: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-193-1525
Piastra Di Montaggi

151931525
504138887: RNCC: 3 | RNVC: 2
(241)A4249504138887: RNCC: 5 | RNVC: 2

20 Apr 2010

5340-15-157-3004
Handwheel

151573004
26HJ04143051S01-004/N: RNCC: 3 | RNVC: 2

19 Jun 2003

5340-15-148-9483
Bracket

151489483
P-120080-002: RNCC: 3 | RNVC: 2
P120080-002: RNCC: 3 | RNVC: 2

9 Nov 1998

5340-15-007-5161
Cover Plate Access

150075161
1239-01-159: RNCC: 3 | RNVC: 2

15 Jan 1979

5340-15-107-8484
Corredo Di Parti

151078484
140-3004-012: RNCC: 3 | RNVC: 2

1 Mar 1988

5340-15-116-2747
Accesso Coperchio

151162747
190519114: RNCC: 3 | RNVC: 2

15 Apr 1993

5340-15-152-2155
Chiusura

151522155
60183814: RNCC: 3 | RNVC: 2

10 Aug 2000

5340-15-152-3420
Flangia

151523420
0-118172: RNCC: 3 | RNVC: 2
00118172: RNCC: 3 | RNVC: 2
(241)A39630-118172: RNCC: 5 | RNVC: 2
(241)A396300118172: RNCC: 5 | RNVC: 2

4 Sep 2000

5340-15-122-1334
Plate Base

151221334
A-39109-001: RNCC: 3 | RNVC: 2
A39109-001: RNCC: 3 | RNVC: 2

21 May 1996

5340-15-119-2437
Piastra Per Adattat

151192437
212-8900-42-1: RNCC: 3 | RNVC: 2

31 May 1995

5340-15-144-4992
Mezza Cerniera Inte

151444992
66447-113: RNCC: 3 | RNVC: 2
66447-113: RNCC: 3 | RNVC: 2

11 Dec 1996

5340-15-153-8101
Base (1) Per Sosteg

151538101
01800A126000: RNCC: 5 | RNVC: 3
01800A126000: RNCC: 5 | RNVC: 9

1 Mar 2001

5340-15-007-3817
Dispositivo Arresto

150073817
1-3796374: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-006-2523
Ghiera Speciale

150062523
0-08989: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-006-2365
Serratura Speciale

150062365
0-33965: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-108-0934
Winkel

151080934
A81091-01-22: RNCC: 3 | RNVC: 2
A81091-01-22: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-101-7806
Corrosion Preventive Anode

151017806
3G-A/P/12/210/0: RNCC: 3 | RNVC: 2
A-AC-1-12-120: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-045-4439
Turnbuckle

150454439
784-12-27-03: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-127-5185
Molla Innesto Frizi

151275185
874239: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-109-3932
Electrical-Me Post

151093932
5137-308-10: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-059-4725
Nut And Bolt Locking Plate

150594725
12-06-23-00: RNCC: 3 | RNVC: 2

10 Apr 1975

5340-15-103-1606
Control Rod

151031606
L5200309: RNCC: 3 | RNVC: 2
DE160.03.219: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-155-4909
Holding Fixture Ass

151554909
CBD71126G01: RNCC: 3 | RNVC: 2

28 Mar 2002

5340-15-003-9040
Stand Base

150039040
182734141: RNCC: 3 | RNVC: 2
(241)A0199182734141: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-074-4395
Turnbuckle

150744395
1A16UNI2021A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-110-7906
Mezzacernieraanastr

151107906
04152-101A00: RNCC: 3 | RNVC: 2
04152-101: RNCC: 5 | RNVC: 2

29 Jul 1990

5340-15-156-4038
Speciale Lamiera

151564038
142057334: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-110-1775
Control Rod

151101775
65469: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-041-9292
Fascetta

150419292
1-2756-116-24446-6: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-170-5637
Handle

151705637
839-4002-008: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-15-158-2728
Hinge

151582728
99UJ04543298S01-010: RNCC: 5 | RNVC: 9

7 Jan 2004

5340-15-144-8424
Corrosion Preventive Anode

151448424
TG.086407TIPOB: RNCC: 3 | RNVC: 2

24 Jan 1997

5340-15-149-3365
Resilient Mount

151493365
99449100: RNCC: 3 | RNVC: 2
142058218: RNCC: 8 | RNVC: 2

28 Jan 1999

5340-15-151-2316
Threaded End Tensioning Tie Rod

151512316
00085695: RNCC: 3 | RNVC: 2

3 May 2000

5340-15-151-6962
Piastra

151516962
0-178736: RNCC: 3 | RNVC: 2

30 Jun 2000

5340-15-116-8491
Linear Actuating Cylinder Piston Rod

151168491
D1402740: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-15-152-6433
Staffa

151526433
0-153642: RNCC: 3 | RNVC: 2

3 Oct 2000

5340-15-112-8301
Headless Grooved Rod

151128301
467107: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-005-5325
Threaded End Tensioning Tie Rod

150055325
1026-01-272: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-111-8757
Dust And Moisture Seal Protective Cap

151118757
43548.4: RNCC: 3 | RNVC: 2

8 Oct 1993

5340-15-148-1674
Dust And Moisture Seal Protective Cover

151481674
T500/079/01/01: RNCC: 3 | RNVC: 2

1 Jul 1998

5340-15-007-2734
Supporto

150072734
1386234: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-222-2266
Pannello 1210X700

152222266
S1-127: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-118-0449
Coperchio Scatola

151180449
D0485669: RNCC: 3 | RNVC: 2

18 Nov 1994

5340-15-150-4499
Assieme Supporto Sp

151504499
44271-001: RNCC: 5 | RNVC: 2
44271-001: RNCC: 5 | RNVC: 9

11 Nov 1999

5340-15-199-4396
Control Rod

151994396
489787: RNCC: 3 | RNVC: 2
(241)A0866489787: RNCC: 5 | RNVC: 2

4 Apr 2005

5340-15-156-2039
Bracket

151562039
(241)A3460CBD71204P02: RNCC: 3 | RNVC: 2
CBD71204P02: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-064-7365
Eye Hook

150647365
OD048Z243: RNCC: 3 | RNVC: 2

23 Feb 1984

5340-15-118-0830
Linear Actuating Cylinder Cap

151180830
D0484570: RNCC: 3 | RNVC: 2

16 Dec 1994

5340-15-061-2344
Rim Clen Clamp (1)

150612344
000200006800: RNCC: 5 | RNVC: 2
1200096-113100044: RNCC: 5 | RNVC: 2
000200006800: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-215-0316
Fascetta Per Cablag

152150316
L6653/2-216: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-113-4688
Supporto Speciale

151134688
2104-0053-001: RNCC: 3 | RNVC: 2

24 Jul 1991

5340-15-194-1039
Dust And Moisture Seal Protective Plug

151941039
9425566: RNCC: 3 | RNVC: 2

2 Sep 2010

5340-15-157-4474
Rod

151574474
13HJ04143206S01-409-002: RNCC: 3 | RNVC: 2

17 Jul 2003

5340-15-144-5232
Cerniera Sinistra C

151445232
66928-001B1: RNCC: 3 | RNVC: 2
66928-001B1: RNCC: 3 | RNVC: 2

11 Dec 1996

5340-15-154-1009
Window Regulator Handle

151541009
0-162016: RNCC: 3 | RNVC: 2
(241)A39630-162016: RNCC: 5 | RNVC: 2
1PA39630-162016: RNCC: 5 | RNVC: 2

20 Mar 2001

5340-15-153-7058
Dashpot

151537058
142011100: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-180-6393
Supporto

151806393
252A5255-001: RNCC: 3 | RNVC: 2
(241)A2142252A5255-001: RNCC: 5 | RNVC: 2

27 Jun 2008

5340-15-113-9704
Manigliadisicurezza

151139704
262A1250-001: RNCC: 3 | RNVC: 2

31 Mar 1992

5340-15-151-5356
Staffa

151515356
0-112036: RNCC: 3 | RNVC: 2
00112036: RNCC: 3 | RNVC: 2
(241)A39630-112036: RNCC: 5 | RNVC: 2
1PA39630-112036: RNCC: 5 | RNVC: 2

6 Jun 2000

5340-15-149-0758
Speciale Sede

151490758
2224-0015-001: RNCC: 3 | RNVC: 2

23 Nov 1998

5340-15-106-9682
Pomello Bloccaggio

151069682
27-159-63: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-136-6965
Morsetto

151366965
72-068-801: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-142-3817
Anodo Anticorrosion

151423817
ZN/CD: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-149-3182
Multiple Angle Bracket

151493182
4886378: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-159-9730
Rubber Bumper

151599730
122603502: RNCC: 3 | RNVC: 2

19 Apr 2004

5340-15-179-6948
Double Angle Bracket

151796948
0000500413765: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-055-3728
Guarnizione Special

150553728
N3729-6: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-181-0571
Engine Accessory Bracket

151810571
070849: RNCC: 3 | RNVC: 2
(241)A3593070849: RNCC: 5 | RNVC: 2

10 Oct 2008

5340-15-137-2143
Molla

151372143
531-075-663-1: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-065-0818
Ghiera Di Testata

150650818
39A543-12-10: RNCC: 3 | RNVC: 2

1 Dec 1984

5340-15-063-8844
Helical Compression Spring Retainer

150638844
56002: RNCC: 3 | RNVC: 2

15 Sep 1982

5340-15-063-9744
Impugnatura A Sfera

150639744
S40N12: RNCC: 3 | RNVC: 2
F300 0T 014 3307: RNCC: 6 | RNVC: 9

25 Apr 1983

5340-15-139-3758
Staffa

151393758
42043605: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-115-5408
Control Rod

151155408
D0471908: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-162-1718
Body

151621718
291A10010-109: RNCC: 3 | RNVC: 2

3 Apr 2001

5340-15-216-5608
Maniglione

152165608
MANIGLIONI: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-174-7490
Quadro 25 Peaisi1mg

151747490
54230-21/025: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-149-6130
Support

151496130
518-38-1200: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-005-6882
Coperchio Speciale

150056882
0-33852: RNCC: 3 | RNVC: 2

12 Aug 1979

5340-15-061-6631
Chiusura A Compasso

150616631
SE 1929: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-051-3650
Dente D Arresto

150513650
4550854: RNCC: 3 | RNVC: 2
4550854: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-186-9633
Tampone Ammortizzat

151869633
4093023: RNCC: 3 | RNVC: 2
(241)A42494093023: RNCC: 5 | RNVC: 2

12 Jan 2009

5340-15-125-3273
Tappo Fusione

151253273
14329201: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-157-9119
Staffa Speciale

151579119
0-154117: RNCC: 3 | RNVC: 2
1PA39630-154117: RNCC: 5 | RNVC: 2
(241)A39630-154117: RNCC: 5 | RNVC: 2

24 Nov 2003

5340-15-203-0306
Maniglia Speciale

152030306
0-958132: RNCC: 3 | RNVC: 2
(241)A39630-958132: RNCC: 5 | RNVC: 2

19 Nov 2007

5340-15-111-5885
Wheel

151115885
A06082-01-30: RNCC: 3 | RNVC: 2
A06082-01-30: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-005-2196
Threaded End Tensioning Tie Rod

150052196
6152850: RNCC: 3 | RNVC: 2

16 Sep 1980

5340-15-198-9544
Dust And Moisture Seal Protective Cap-Plug

151989544
10447039: RNCC: 3 | RNVC: 2
(241)AB16110447039: RNCC: 5 | RNVC: 2

9 Dec 2004

5340-15-139-4513
Tirante

151394513
4729616: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-102-2799
Gruppo Staffaggio

151022799
644643: RNCC: 3 | RNVC: 2
644643: RNCC: 5 | RNVC: 9

18 Feb 1988

5340-15-185-7111
Ruota Girevole

151857111
656603: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-194-3435
Universal Adjustable Chock

151943435
311772F01: RNCC: 3 | RNVC: 2

4 Nov 2010

5340-15-110-7997
Attaccoacerniera

151107997
68240-001A01: RNCC: 3 | RNVC: 2
68240-001A1: RNCC: 5 | RNVC: 2
68240-001A01: RNCC: 5 | RNVC: 9
68240-001A1: RNCC: 5 | RNVC: 9

29 Jul 1990

5340-15-100-8109
Semicerniera

151008109
109-0640-52-130: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-15-064-6999
Bracket

150646999
A-125223-001: RNCC: 3 | RNVC: 2
A125223-001: RNCC: 5 | RNVC: 2

10 Jun 1984

5340-15-009-3267
Semicerniera

150093267
P-884031-004: RNCC: 3 | RNVC: 2

12 Sep 1980

5340-15-151-7547
Hinge Assembly

151517547
J52850200-401: RNCC: 3 | RNVC: 2

5 Jul 2000

5340-15-166-4741
Mezza Cerniera Inte

151664741
67288101: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-156-2010
Base

151562010
(241)A3460CBD71173P01: RNCC: 3 | RNVC: 2
CBD71173P01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-197-7256
Attacco

151977256
129-0641-37-101: RNCC: 3 | RNVC: 2

21 Apr 2004

5340-15-174-7335
Handle

151747335
825-4021-302: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-114-0563
Ventilator

151140563
03/021704/99: RNCC: 3 | RNVC: 2
03/021704/99: RNCC: 5 | RNVC: 9

17 Apr 1992

5340-15-000-4446
Strengthening Plate

150004446
129-0640-82-379: RNCC: 3 | RNVC: 2

4 Mar 2013

5340-15-118-2833
Piastrina Metallica

151182833
D0483768: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-15-063-3713
Eye Hook

150633713
60109183: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-134-4189
Tampone Molla

151344189
03865-101: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-203-9708
Rotella

152039708
22500674: RNCC: 3 | RNVC: 2
(241)A486722500674: RNCC: 5 | RNVC: 2

29 Jul 2011

5340-15-003-4783
Distanziale

150034783
899245: RNCC: 3 | RNVC: 2
899245: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-106-9797
Chiavistello Molla

151069797
5086-03-33: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-170-3629
Strap

151703629
206-031-557-3: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-198-5838
Support

151985838
21367-002: RNCC: 3 | RNVC: 2

15 Oct 2004

5340-15-174-7524
Bacchetta Ag

151747524
57960-01/051: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-118-0063
Threaded End Tensioning Tie Rod

151180063
1Q 540892: RNCC: 3 | RNVC: 2
1Q 540892: RNCC: 5 | RNVC: 9

28 Jan 1995

5340-15-186-7671
Utility Resilient Mount

151867671
8141758: RNCC: 3 | RNVC: 2

5 Jan 2009

5340-15-148-6387
Stand Base (1)

151486387
190509318: RNCC: 3 | RNVC: 2

17 Sep 1998

5340-15-174-7556
Film Spe.Cross-Over

151747556
58634-70/007: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-115-0227
Coperchio

151150227
02-10-732-201A: RNCC: 3 | RNVC: 2

16 Jun 1993

5340-15-170-8121
Traversa Supp. Cusc

151708121
340-0727/21: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-110-2818
Bracket Ang

151102818
P135240-001: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-207-1917
Stand Base

152071917
482700000/225: RNCC: 3 | RNVC: 2
(241)A0199482700000/225: RNCC: 5 | RNVC: 2

20 Sep 2012

5340-15-170-5719
Clamp 128X250a

151705719
805-4021-008: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-15-179-6545
Mount

151796545
873-5800-339: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-231-1125
Lucchetto Mm.75

152311125
285/75: RNCC: 3 | RNVC: 2
534015E091839: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-156-1510
Shipping Container Bracket

151561510
991243109: RNCC: 3 | RNVC: 2
42536472: RNCC: 5 | RNVC: 2

6 Dec 2002

5340-15-057-8968
Nut And Bolt Locking Plate

150578968
P44HB54: RNCC: 5 | RNVC: 2
P44HB54: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-004-2446
Rim Clen Clamp (1)

150042446
L304BE: RNCC: 5 | RNVC: 2
L304BE: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-062-8778
Anello Speciale

150628778
0-42627: RNCC: 3 | RNVC: 2

9 Feb 1982

5340-15-141-3638
Anodo

151413638
5844/13-10: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-115-8651
Cover Assy

151158651
71-66-001-066: RNCC: 3 | RNVC: 2
249551G1: RNCC: 3 | RNVC: 2

1 Feb 1993

5340-15-135-9713
Staffa Inferiore Pa

151359713
4445456: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-009-1541
Supporto Speciale

150091541
4669611: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-009-5667
Supporto Maniglia C

150095667
SF260-14-48-1: RNCC: 3 | RNVC: 2
SF260-14-48-1: RNCC: 5 | RNVC: 9

6 Nov 1980

5340-15-112-0302
Cappuccio Protettiv

151120302
TSP333/6: RNCC: 3 | RNVC: 2

19 Feb 1991

5340-15-019-9414

5340-15-009-9014
Cover Plate Access

150099014
1236-19-104: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-166-4792
Cap Protective

151664792
3800005456: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-202-7791
Paletto Ferma-Porta

152027791
A.14784-G1: RNCC: 3 | RNVC: 2
(241)A7904A.14784-G1: RNCC: 5 | RNVC: 2

10 Jul 2007

5340-15-158-5228
Loop Clamp Kit

151585228
451A1015-007: RNCC: 3 | RNVC: 2

1 Mar 2004

5340-15-005-2229
Clamp

150052229
649-411-598-0: RNCC: 3 | RNVC: 2

9 Dec 2013

5340-15-138-6756
Inserto Filettato

151386756
5641-262-101: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-115-3099
Eqpt Rack Mech.Acce

151153099
100-0312/01: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-180-4273
Optic Units S Cover

151804273
205-1600-14-107: RNCC: 3 | RNVC: 2
(241)A0126205-1600-14-107: RNCC: 5 | RNVC: 2

20 May 2008

5340-15-112-0141
Maniglia

151120141
105-3091: RNCC: 3 | RNVC: 2

20 May 1991

5340-15-114-4422
Helical Compression Spring Seat

151144422
60158206: RNCC: 3 | RNVC: 2

12 Jun 1992

5340-15-137-4313
Distanziale

151374313
A67889: RNCC: 3 | RNVC: 2
A67889: RNCC: 5 | RNVC: 9

9 Oct 1996

5340-15-186-4287
Nastro Carta Masche

151864287
53268-53737-53267-53738: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-109-9329
Dispositivodifissag

151099329
K105-03: RNCC: 3 | RNVC: 2

1 Mar 1990

5340-15-150-5870
Assieme Cerniera Fl

151505870
A37594-01-10: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-15-108-1689
Threaded End Tensioning Tie Rod

151081689
1576-23-116: RNCC: 3 | RNVC: 2
157623116: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-135-9377
Tappo

151359377
MPS10-12: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-100-0088
Maniglia Assieme

151000088
2045: RNCC: 3 | RNVC: 2

22 Oct 1986

5340-15-175-8390
Serratura Welka Da

151758390
11215010: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-188-3767
Dust And Moisture Seal Protective Cap

151883767
3AL79266AAAA: RNCC: 3 | RNVC: 2

3 Sep 2009

5340-15-113-8595
Threaded End Tensioning Tie Rod

151138595
1Z 590199LC: RNCC: 3 | RNVC: 2
1Z 590199LC: RNCC: 5 | RNVC: 9

13 Jun 1994

5340-15-020-1953
Traversino

150201953
01-231N20: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-197-5831
Snap Hook

151975831
PN UAS 00032232: RNCC: 3 | RNVC: 2
4030F76028874: RNCC: 5 | RNVC: 9

8 Apr 2004

5340-15-199-8480
Tubo Di Protezione

151998480
9CS3703084: RNCC: 3 | RNVC: 2
(241)A91729CS3703084: RNCC: 5 | RNVC: 2

14 Jun 2005

5340-15-156-2035
Bracket

151562035
CBD71206P02: RNCC: 3 | RNVC: 2
(241)A3460CBD71206P02: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-068-5320
Blocco Angolo

150685320
SH 3465-001: RNCC: 3 | RNVC: 2

9 Oct 1986

5340-15-114-7000
Elemento Ad Anello

151147000
737599-10: RNCC: 3 | RNVC: 2
737599-10: RNCC: 5 | RNVC: 9

24 Jul 1992

5340-15-174-7320
Elevation Bellows

151747320
825-4012-332: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-195-8361
Supporto Serbatoio

151958361
DE160.04.584: RNCC: 3 | RNVC: 2
110149: RNCC: 3 | RNVC: 2
(241)A3593110149: RNCC: 5 | RNVC: 2

18 May 2011

5340-15-193-8131
Mounting Plate

151938131
SPE-J-943-A-9001/037: RNCC: 3 | RNVC: 2
(241)A0019SPE-J-943-A-9001/037: RNCC: 5 | RNVC: 2

19 Jul 2010

5340-15-110-2800
Bracket Ang

151102800
P125387-001: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-061-2687
Electrical-Me Post

150612687
000200291200: RNCC: 5 | RNVC: 2
000200291200: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-103-6459
Completa Cerniera

151036459
24009576A: RNCC: 3 | RNVC: 2

26 Nov 1987

5340-15-003-5064
Supporto Elastico

150035064
4502627: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-230-2556
Staffa

152302556
310153F91: RNCC: 3 | RNVC: 2
534015E146671: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-116-8969
Rubber Bumper

151168969
DPR 23434-97: RNCC: 3 | RNVC: 2

23 Nov 1993

5340-15-153-5012
Half Hinge

151535012
J57140699-001: RNCC: 3 | RNVC: 2

5 Feb 2001

5340-15-120-1478
Perno Supporto Semi

151201478
215A1016-003: RNCC: 3 | RNVC: 2

16 Jan 1995

5340-15-005-4055
Cover Plate Access

150054055
1137-16-110: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-222-2269
Pannello 1020X700

152222269
S1-115: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-064-9420
Maniglia

150649420
MC261-3-971/E: RNCC: 3 | RNVC: 2

28 Aug 1979

5340-15-152-1210
Access Door

151521210
60161170: RNCC: 3 | RNVC: 2

7 Aug 2000

5340-15-174-6444
Dust And Moisture Seal Protective Cover

151746444
CARP33351: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-15-009-2603
Semicerniera

150092603
P-882739-003: RNCC: 3 | RNVC: 2
P882739-003: RNCC: 5 | RNVC: 2

20 Aug 1980

5340-15-114-8764
Tiranteassiemespeci

151148764
269514A2: RNCC: 3 | RNVC: 2

21 Aug 1992

5340-15-188-0832
Stand Base

151880832
0000527031: RNCC: 3 | RNVC: 2

1 Jul 2009

5340-15-112-8416
Guidaa

151128416
466704: RNCC: 3 | RNVC: 2
D0466704: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-178-8695
Nonmetallic Bumper

151788695
345113120: RNCC: 3 | RNVC: 2

15 Dec 2005

5340-15-061-5734
Double Angle Bracket

150615734
P-135343-001: RNCC: 3 | RNVC: 2
P135343-001: RNCC: 5 | RNVC: 2

2 Feb 1978

5340-15-113-9693
Escutcheon Plate

151139693
252A3070-001: RNCC: 3 | RNVC: 2

31 Mar 1992

5340-15-020-2304
Snap Hook

150202304
02-231E02-39: RNCC: 3 | RNVC: 2
26005010330: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-007-7158
Fascetta Speciale

150077158
50090221-310: RNCC: 5 | RNVC: 9

15 Jul 1980

5340-15-005-3870
Dust And Moisture Seal Protective Plug

150053870
A83245-39: RNCC: 3 | RNVC: 2

12 Feb 1979

5340-15-054-8848
Threaded End Tensioning Tie Rod

150548848
533-52-1900: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-102-3126
Support Bracket

151023126
140-0412/01: RNCC: 3 | RNVC: 2

19 Jul 1988

5340-15-062-0849
Hinge

150620849
P884031-002: RNCC: 3 | RNVC: 2

27 Oct 1980

5340-15-232-9078
Forcella

152329078
800.0023/12: RNCC: 3 | RNVC: 2
534015E074564: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-009-0900
Rubber Bumper

150090900
8557660: RNCC: 3 | RNVC: 2
821DN0017: RNCC: 5 | RNVC: 2

1 Jun 1987

5340-15-156-2003
Base

151562003
CBD71165P01: RNCC: 3 | RNVC: 2
(241)A3460CBD71165P01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-170-8111
Custodia

151708111
313-0100/01: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-115-7038
Manovella Speciale

151157038
D1401159: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-196-6296
Padlock

151966296
PN UAS 00040128: RNCC: 3 | RNVC: 2
5340F76034138: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-166-4866
Molletta

151664866
82440839: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-112-8604
Astar

151128604
468948: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-214-8414
Chiudiporta Tipo Ma

152148414
MOD.502: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-137-1632
Inserto

151371632
STD1872: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-065-3441
Luggage Bumper

150653441
86773L: RNCC: 3 | RNVC: 2
93401320: RNCC: 5 | RNVC: 2

15 Oct 1982

5340-15-113-1380
Pritezione Cerniera

151131380
311A5540-001: RNCC: 3 | RNVC: 2

7 Oct 1990

5340-15-141-5500
Ferodo

151415500
DOZ026062: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-045-3350
Control Rod

150453350
N0R5-221-00-14-496: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-066-1297
Lh Angle

150661297
P-882609-003: RNCC: 3 | RNVC: 2
P882609-003: RNCC: 5 | RNVC: 2

10 Feb 1986

5340-15-115-7040
Bosta Portaguarnizi

151157040
D1401046: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-135-9516
Tassello

151359516
4094308: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-195-7731
Barilotto Per Galle

151957731
412-4600-14-101: RNCC: 3 | RNVC: 2

9 May 2011

5340-15-107-5062
Metal Runner

151075062
7301039: RNCC: 3 | RNVC: 2
(7001)5340151075062: RNCC: 5 | RNVC: 2
7301039: RNCC: 5 | RNVC: 2

30 Mar 1988

5340-15-007-0763
Fascetta Speciale

150070763
0-02791: RNCC: 3 | RNVC: 2

7 Nov 1985

5340-15-185-8612
Cerniera A Camma

151858612
500228927: RNCC: 3 | RNVC: 2
500228927000: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-121-5691
Handwheel

151215691
1P 310351: RNCC: 3 | RNVC: 2
E3685: RNCC: 3 | RNVC: 2
1P 310351: RNCC: 5 | RNVC: 9

17 Sep 1996

5340-15-163-2332
Plate

151632332
4806153: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-155-6275
Handwheel

151556275
VA0003948: RNCC: 3 | RNVC: 2
1PA3488VA0003948: RNCC: 3 | RNVC: 2

2 May 2002

5340-15-064-3777
Resilient Mount Plate

150643777
1355-19-108: RNCC: 3 | RNVC: 2

30 Jan 1984

5340-15-114-7672
Bushing Ins

151147672
X446C19-03: RNCC: 3 | RNVC: 2

4 Aug 1992

5340-15-116-0949
Assieme Leva

151160949
68-103145-405: RNCC: 3 | RNVC: 2

4 Mar 1993

5340-15-066-0038
Helical Compression Spring Seat

150660038
2402-165: RNCC: 3 | RNVC: 2

10 Oct 1985

5340-15-157-2127
Rod End

151572127
263A2330-003: RNCC: 3 | RNVC: 2

21 May 2003

5340-15-174-7471
Nastro 300X0.10 Cue

151747471
53610-01/010: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-134-5397
Chiavistello

151345397
205-1-023-23: RNCC: 3 | RNVC: 2
205-1-023-23: RNCC: 5 | RNVC: 9

9 Oct 1996

Load More Results