What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 3 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 3 of 72

5340-15-199-1263
T Plate

151991263
87363-101: RNCC: 3 | RNVC: 2

17 Jan 2005

5340-15-061-4070
Angle Bracket

150614070
P-120230-002: RNCC: 3 | RNVC: 2
P120230-002: RNCC: 5 | RNVC: 2

19 Jan 1978

5340-15-153-9592
Loop Clamp

151539592
G50/70UNI9209ACCIAIO-ZN: RNCC: 3 | RNVC: 2
230024076: RNCC: 5 | RNVC: 2

12 Mar 2001

5340-15-145-1929
Swivel Caster

151451929
53-5006FITTEDAXLEBUSHFROM50-0206: RNCC: 3 | RNVC: 2
53-5006: RNCC: 5 | RNVC: 1
53-5006FITTEDAXLEBUSHFROM50-0206: RNCC: 5 | RNVC: 2
PRO-OB-SC: RNCC: 5 | RNVC: 2

2 Jun 1997

5340-15-119-8955
Mounting Bracket

151198955
322277F91: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-107-1046
Lock-Release Lever

151071046
301-01-1220: RNCC: 3 | RNVC: 2

14 Apr 1987

5340-15-201-1755
Blank Panel

152011755
N937G0031101: RNCC: 3 | RNVC: 2
(241)A0126N937G0031101: RNCC: 5 | RNVC: 2

12 Jun 2006

5340-15-178-0286
Mounting Bracket

151780286
31100260000: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-15-053-0671
Screw Thread Insert

150530671
26T042P033: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-154-5547
Angle Bracket

151545547
A387A1192N: RNCC: 3 | RNVC: 2

12 Jul 2001

5340-15-148-5214
Hook Handle

151485214
98473898: RNCC: 3 | RNVC: 2

13 Aug 1999

5340-15-005-0470
Loop Clamp

150050470
0-33490: RNCC: 3 | RNVC: 2

7 Sep 1978

5340-15-122-2016
Mounting Bracket

151222016
D1267012: RNCC: 3 | RNVC: 2
D1267012: RNCC: 5 | RNVC: 2
D1267012: RNCC: 5 | RNVC: 2

25 Jun 1996

5340-15-153-6872
Loop Clamp

151536872
142068021: RNCC: 3 | RNVC: 2

20 Feb 2001

5340-15-105-2165
Mending Plate

151052165
38812528: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-002-1452
Mounting Bracket

150021452
5801449590: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-111-7986
Angle Bracket

151117986
9978: RNCC: 3 | RNVC: 2

1 Jul 1990

5340-15-178-9226
Bridge Clamp

151789226
TN130MD003AA00: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-15-001-5536
Hand Crank

150015536
182713021: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-15-116-4847
Clamping Catch

151164847
60162739: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-062-7925
Retaining Strap

150627925
0-34175: RNCC: 3 | RNVC: 2

28 Aug 1982

5340-15-051-2800
Retaining Strap

150512800
4562090: RNCC: 3 | RNVC: 2
4562090: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-119-9246
Loop Clamp

151199246
69F006P002: RNCC: 3 | RNVC: 2

21 Nov 1994

5340-15-147-6316
Loop Clamp

151476316
5116793: RNCC: 3 | RNVC: 2

5 Feb 1998

5340-15-120-2738
Angle Bracket

151202738
60164804: RNCC: 3 | RNVC: 2

9 Mar 1995

5340-15-179-8952
Mounting Bracket

151798952
D1402429: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-163-3820
Mounting Bracket

151633820
9452820: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-118-7574
Mounting Bracket

151187574
9436761: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-153-2562
Butt Hinge

151532562
122606207: RNCC: 2 | RNVC: 3

12 Dec 2000

5340-15-187-7438
Loop Clamp

151877438
17316799: RNCC: 3 | RNVC: 2

5 May 2009

5340-15-073-8756
Rim Lock

150738756
39A90X50: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-149-5780
Loop Clamp

151495780
ACC272: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-139-9270
Spring Tension Clip

151399270
H252RA: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-153-7162
Mounting Bracket

151537162
142024173: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-008-0571
Rod End Clevis

150080571
60111105: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-150-6609
Retaining Clip

151506609
015254AA: RNCC: 3 | RNVC: 2

20 Dec 1999

5340-15-063-0608
Angle Bracket

150630608
0-100384: RNCC: 3 | RNVC: 2

30 May 1982

5340-15-107-4477
Expansion Plug

151074477
1Q 303135: RNCC: 3 | RNVC: 2
1Q 303135: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-001-5863
Loop Clamp

150015863
41231089: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-153-6885
Loop Clamp

151536885
142068037: RNCC: 3 | RNVC: 2

20 Feb 2001

5340-15-000-0823
Loop Clamp

150000823
107022437200: RNCC: 3 | RNVC: 2

24 Jan 2013

5340-15-152-1211
Bridge Clamp

151521211
60159326: RNCC: 3 | RNVC: 2

7 Aug 2000

5340-15-117-5295
Screw Thread Insert

151175295
593919538.6: RNCC: 3 | RNVC: 2
593919538.6: RNCC: 5 | RNVC: 2
93159922: RNCC: 5 | RNVC: 2

8 Nov 1993

5340-15-199-4643
Angle Bracket

151994643
A387A1150C: RNCC: 3 | RNVC: 2
(241)A0126A387A1150C: RNCC: 5 | RNVC: 2

12 Apr 2005

5340-15-002-1363
Mounting Bracket

150021363
5801474083: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-122-2664
Mounting Bracket

151222664
800039533: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-152-8058
Mounting Bracket

151528058
P131100: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-193-5045
Retaining Clip

151935045
RAC0211: RNCC: 3 | RNVC: 2

25 May 2010

5340-15-103-6754
Swivel Caster

151036754
24009408A: RNCC: 3 | RNVC: 2

26 Nov 1987

5340-15-109-8780
Loop Clamp

151098780
60112196: RNCC: 3 | RNVC: 2

15 Oct 1988

5340-15-060-4599
Butt Hinge

150604599
1971TAV69-210TT0NECR0MAT0SINISTR: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-062-9169
Angle Bracket

150629169
0-100259: RNCC: 3 | RNVC: 2

28 Aug 1981

5340-15-155-6556
Loop Clamp

151556556
0550123: RNCC: 3 | RNVC: 2
(241)A97720550123: RNCC: 8 | RNVC: 2

14 May 2002

5340-15-002-3105
Mounting Bracket

150023105
504377091: RNCC: 3 | RNVC: 2

6 Aug 2013

5340-15-148-9853
Mounting Bracket

151489853
589 19: RNCC: 3 | RNVC: 2
589 19: RNCC: 5 | RNVC: 9

9 Nov 1998

5340-15-062-3700
Angle Bracket

150623700
012290 Y: RNCC: 3 | RNVC: 2

1 May 1977

5340-15-009-5740
Flush Lock

150095740
4021698: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-004-3852
Mending Plate

150043852
0-33356: RNCC: 3 | RNVC: 2

7 Sep 1978

5340-15-007-5304
Retaining Strap

150075304
1239-07-102: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-198-8114
Loop Clamp

151988114
18087991: RNCC: 3 | RNVC: 2

17 Nov 2004

5340-15-151-2191
Retaining Clip

151512191
D00T1328: RNCC: 3 | RNVC: 2
C00.1328: RNCC: 3 | RNVC: 2
(241)A3334C00.1328: RNCC: 4 | RNVC: 1

28 Apr 2000

5340-15-205-5139
Loop Clamp

152055139
179040170: RNCC: 3 | RNVC: 2
(241)A0199179040170: RNCC: 5 | RNVC: 2

15 Mar 2012

5340-15-062-9077
Loop Clamp

150629077
0-100001: RNCC: 3 | RNVC: 2

9 Jul 1981

5340-15-157-1792
Loop Clamp

151571792
A071A012NB: RNCC: 3 | RNVC: 2

15 May 2003

5340-15-104-4366
Expansion Plug

151044366
57-8990-02: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-122-2069
Loop Clamp

151222069
8B0068666: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-004-9090
Loop Clamp

150049090
666: RNCC: 3 | RNVC: 2

20 May 1978

5340-15-118-3394
Loop Clamp

151183394
60140998: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-155-4574
Mounting Bracket

151554574
CBD71289P05: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-15-156-1738
Loop Clamp

151561738
13434770: RNCC: 3 | RNVC: 2

11 Dec 2002

5340-15-062-7228
Angle Bracket

150627228
P-882608-001: RNCC: 3 | RNVC: 2
P882608-001: RNCC: 5 | RNVC: 2

27 Sep 1982

5340-15-122-3298
Butt Hinge Leaf

151223298
212A7106-002: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-065-7281
Angle Bracket

150657281
109-0363-03-1: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-15-186-9495
Handwheel

151869495
VRTP.160+IR A-16: RNCC: 3 | RNVC: 2
78732: RNCC: 3 | RNVC: 2

8 Jan 2009

5340-15-115-7443
Spring Holder

151157443
271004/12: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-102-2210
Retaining Strap

151022210
109-0750-13-1: RNCC: 3 | RNVC: 2

16 Dec 1986

5340-15-045-3489
Loop Clamp

150453489
721-12-03: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-116-4965
Catch Strike

151164965
60168698: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-128-3891
Expansion Plug

151283891
1-01605-01: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-151-1443
Mounting Bracket

151511443
380-2390/01: RNCC: 3 | RNVC: 2

30 Mar 2000

5340-15-111-3801
Strap Hinge

151113801
113A6031-004: RNCC: 3 | RNVC: 2

7 Sep 1990

5340-15-120-2164
Leather Strap

151202164
942038936/LRT: RNCC: 3 | RNVC: 2
942038936: RNCC: 5 | RNVC: 2
942038936: RNCC: 5 | RNVC: 9

23 Feb 1995

5340-15-050-4498
Loop Clamp

150504498
N0R2-505-05-37B: RNCC: 3 | RNVC: 2
N0R505-05-37B: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-065-7247
Access Door Hinge

150657247
109-0503-27-1: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-15-187-1430
Loop Clamp

151871430
9305.080: RNCC: 3 | RNVC: 2
9305.080: RNCC: 5 | RNVC: 2

19 Feb 2009

5340-15-153-2999
Stand Base

151532999
122601462: RNCC: 2 | RNVC: 3

13 Dec 2000

5340-15-063-3189
Loop Clamp

150633189
60104850: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-001-7923
Plug Button

150017923
41023323: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-001-7872
Mounting Bracket

150017872
500400515: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-118-4424
Angle Bracket

151184424
60153332: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-118-4550
Retaining Strap

151184550
60152294: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-005-5332
Loop Clamp

150055332
1376-09-487: RNCC: 3 | RNVC: 2
137609487: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-001-7904
Mounting Bracket

150017904
5949784713: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-187-2448
Hand Crank

151872448
OMP00000008: RNCC: 3 | RNVC: 2
(241)AE591OMP00000008: RNCC: 5 | RNVC: 2

9 Mar 2009

5340-15-061-0457
Lever Bracket

150610457
176-2A: RNCC: 3 | RNVC: 2

31 Mar 1976

5340-15-118-8195
Expansion Plug

151188195
14282770: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-129-7399
Retaining Band

151297399
1315-53-427: RNCC: 3 | RNVC: 2
1315-53-427: RNCC: 5 | RNVC: 9

9 Oct 1996

5340-15-121-4615
Rod End Clevis

151214615
213A7234-001: RNCC: 3 | RNVC: 2

21 Dec 1995

5340-15-117-6108
Access Cover

151176108
MC410.35E: RNCC: 3 | RNVC: 2

13 Dec 1993

5340-15-178-9197
Retaining Band

151789197
SO013MD002AA00: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-15-052-1724
Loop Clamp

150521724
N0R2-505-05-39B: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-008-4664
Mending Plate

150084664
1127-61-165: RNCC: 3 | RNVC: 2
112761165: RNCC: 5 | RNVC: 2

22 Nov 1987

5340-15-151-7868
Angle Bracket

151517868
0-173797: RNCC: 3 | RNVC: 2

10 Jul 2000

5340-15-121-3499
T Plate

151213499
60162421: RNCC: 3 | RNVC: 2
142046261: RNCC: 8 | RNVC: 2

22 Nov 1995

5340-15-207-8709
Mounting Bracket

152078709
504379783: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-059-3721
Retaining Strap

150593721
1127-36-221: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-181-2419
Latch Bar

151812419
071922908A-Z.PL.: RNCC: 3 | RNVC: 2

17 Nov 2008

5340-15-207-8615
Mounting Bracket

152078615
5801318362: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-188-3503
Mounting Bracket

151883503
30043146: RNCC: 3 | RNVC: 2
Z04.01.03.12: RNCC: 5 | RNVC: 2
5340PL0955481: RNCC: 6 | RNVC: 9

3 Sep 2009

5340-15-156-4070
Loop Clamp

151564070
142068210: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-181-1728
Loop Clamp

151811728
165040103: RNCC: 3 | RNVC: 2
(241)A0199165040103: RNCC: 5 | RNVC: 2

5 Nov 2008

5340-15-058-4668
Loop Clamp

150584668
TM4-0207-001-09: RNCC: 3 | RNVC: 2

10 May 1975

5340-15-008-3844
Retaining Strap

150083844
4641873: RNCC: 3 | RNVC: 2
0-48903: RNCC: 5 | RNVC: 2

27 Mar 1981

5340-15-205-2641
Mounting Bracket

152052641
D1-27021-401: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-064-7630
Flush Lock

150647630
23.10.51.00: RNCC: 3 | RNVC: 2

16 Dec 1983

5340-15-000-2972
Mounting Bracket

150002972
SNCA-WMMD4: RNCC: 3 | RNVC: 2

18 Feb 2013

5340-15-118-3400
Loop Clamp

151183400
60142392: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-118-9517
Loop Clamp

151189517
75204417: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-103-6837
Loop Clamp

151036837
31610004A: RNCC: 3 | RNVC: 2

13 Oct 1995

5340-15-109-1848
Angle Bracket

151091848
1395642: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-041-4045
Handle Grip

150414045
IS001: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-179-5022
Rod End Clevis

151795022
D0407155: RNCC: 3 | RNVC: 2

23 Jan 2007

5340-15-195-7860
Mounting Bracket

151957860
109-0601-79-175: RNCC: 3 | RNVC: 2

10 May 2011

5340-15-179-8937
Access Cover

151798937
D1405050: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-202-6503
Filler Opening Cap

152026503
CFA21SWCCC: RNCC: 3 | RNVC: 2
CFA21SWCCC: RNCC: 3 | RNVC: 2

5 Jun 2007

5340-15-109-1529
Mending Plate

151091529
100900330550: RNCC: 5 | RNVC: 2
100900330550: RNCC: 5 | RNVC: 9

19 Jul 1989

5340-15-118-0932
Loop Clamp

151180932
D0487985: RNCC: 3 | RNVC: 2

20 Dec 1994

5340-15-203-0482
Retaining Band

152030482
033090228: RNCC: 3 | RNVC: 2
(241)A5009033090228: RNCC: 5 | RNVC: 2

19 Nov 2007

5340-15-152-7890
Mounting Plate

151527890
P130606: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-062-7922
Angle Bracket

150627922
0-34172: RNCC: 3 | RNVC: 2

28 Aug 1982

5340-15-118-2037
Screw Thread Insert

151182037
13525970: RNCC: 3 | RNVC: 2

22 Apr 1994

5340-15-117-0598
Protection Bellows

151170598
75221272: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-197-2107
Expansion Shield

151972107
PN UAS 00040539: RNCC: 3 | RNVC: 2
5340F76034309: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-117-0621
Access Cover

151170621
4530113: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-109-1791
Retaining Strap

151091791
60103621: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-065-1341
Mending Plate

150651341
18.10.50.01: RNCC: 3 | RNVC: 2

26 Dec 1983

5340-15-051-5025
Retaining Strap

150515025
T2I5: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-109-8852
Spring Holder

151098852
468473: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-202-4504
Luggage Handle

152024504
1610/3: RNCC: 3 | RNVC: 2
(241)A52001610/3: RNCC: 5 | RNVC: 2

25 Mar 2007

5340-15-100-8742
Roller Holder

151008742
274597G1: RNCC: 3 | RNVC: 2
274597G1: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-009-2771
Bail Handle

150092771
391-0274-03: RNCC: 3 | RNVC: 2
119632P3: RNCC: 3 | RNVC: 2

2 Jan 1980

5340-15-005-7002
Butt Hinge Leaf

150057002
A1-16010-003: RNCC: 3 | RNVC: 2
A1-16010-003: RNCC: 5 | RNVC: 9

10 Apr 1979

5340-15-102-0792
Butt Hinge Leaf

151020792
213A7169-001: RNCC: 3 | RNVC: 2

29 Jul 1988

5340-15-105-8970
Spring Tension Clip

151058970
RO.800-38: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-102-0789
Butt Hinge Leaf

151020789
213A7078-005: RNCC: 3 | RNVC: 2

29 Jul 1988

5340-15-179-5795
Rod End Connector

151795795
329A01210-105: RNCC: 3 | RNVC: 2

11 Apr 2007

5340-15-157-2627
Access Cover

151572627
J52451338-002: RNCC: 3 | RNVC: 2

12 Jun 2003

5340-15-158-0072
Access Cover

151580072
1171.313-01: RNCC: 3 | RNVC: 2

15 Dec 2003

5340-15-102-7221
Rod End Clevis

151027221
1576-06-527: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-108-8706
Retaining Strap

151088706
575.1/RSVM65-280A/OR-553667: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-068-4387
Catch Strike

150684387
SH 3732-001: RNCC: 3 | RNVC: 2

9 Oct 1986

5340-15-162-9945
Access Cover

151629945
0009448230: RNCC: 3 | RNVC: 2
9448230: RNCC: 5 | RNVC: 2

9 Apr 2002

5340-15-149-3200
Mending Plate

151493200
4886513: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-120-2980
Loop Clamp

151202980
60135161: RNCC: 3 | RNVC: 2

13 Mar 1995

5340-15-114-0181
Access Cover

151140181
2102000: RNCC: 3 | RNVC: 2

15 Apr 1992

5340-15-205-2207
Doorknob

152052207
9081509003664: RNCC: 3 | RNVC: 2
(241)A99419081509003664: RNCC: 5 | RNVC: 2

28 Feb 2012

5340-15-003-3514
Mounting Bracket

150033514
713846-0001: RNCC: 3 | RNVC: 2

4 Nov 2013

5340-15-060-5692
Mending Plate

150605692
22292-101: RNCC: 3 | RNVC: 2

1 Jun 1977

5340-15-147-5983
Access Cover

151475983
835133-10: RNCC: 3 | RNVC: 2
835133-10: RNCC: 5 | RNVC: 9

30 Dec 1997

5340-15-005-7021
Butt Hinge Leaf

150057021
A1-23236-007: RNCC: 3 | RNVC: 2
A1-23236-007: RNCC: 5 | RNVC: 9

10 Apr 1979

5340-15-111-8003
Angle Bracket

151118003
31110/16: RNCC: 3 | RNVC: 2

1 Jul 1990

5340-15-114-1141
Mending Plate

151141141
8253.15.52: RNCC: 3 | RNVC: 2

11 Dec 1992

5340-15-188-7655
Drift Bolt

151887655
MOR353645100CH: RNCC: 3 | RNVC: 2
(241)AG622MOR353645100CH: RNCC: 5 | RNVC: 2

13 Nov 2009

5340-15-188-2794
Mounting Plate

151882794
98176776: RNCC: 3 | RNVC: 2

1 Sep 2009

5340-15-157-9187
Angle Bracket

151579187
0-163972: RNCC: 3 | RNVC: 2
(241)A39630-163972: RNCC: 5 | RNVC: 2
1PA39630-163972: RNCC: 5 | RNVC: 2

24 Nov 2003

5340-15-158-4374
Angle Bracket

151584374
22909-101: RNCC: 3 | RNVC: 2

15 Feb 2004

5340-15-118-3665
Mending Plate

151183665
60144389: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-170-9159
Mechanical Stop

151709159
71420529: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-116-4796
Angle Bracket

151164796
60162675: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-008-1816
Retaining Strap

150081816
60114313: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-156-2815
Door Handle

151562815
4786977: RNCC: 3 | RNVC: 2
00110314: RNCC: 4 | RNVC: 1
(241)A396300110314: RNCC: 5 | RNVC: 2
1PA396300110314: RNCC: 5 | RNVC: 2
4786977: RNCC: 5 | RNVC: 2

13 Jan 2003

5340-15-118-3877
Webbing Strap

151183877
60168413: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-118-4005
Angle Bracket

151184005
60160505: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-063-3471
Angle Bracket

150633471
60110652: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-009-2224
Plug Button

150092224
934-702-040-4: RNCC: 3 | RNVC: 2
9347020404: RNCC: 5 | RNVC: 2
9932460: RNCC: 5 | RNVC: 2

22 Sep 1981

5340-15-157-9265
Angle Bracket

151579265
0-171301: RNCC: 3 | RNVC: 2
00171301: RNCC: 3 | RNVC: 2
1PA39630-171301: RNCC: 5 | RNVC: 2
(241)A39630-171301: RNCC: 5 | RNVC: 2

25 Nov 2003

5340-15-006-8946
Rod End Clevis

150068946
39A506-31-30-08: RNCC: 3 | RNVC: 2

2 Jan 1979

5340-15-193-6302
Rod End Clevis

151936302
109-0040-85-101: RNCC: 3 | RNVC: 2

24 Jun 2010

5340-15-149-8311
Filler Opening Cap

151498311
121435340: RNCC: 3 | RNVC: 2

31 Jan 2000

5340-15-120-8114
Angle Bracket

151208114
127147: RNCC: 3 | RNVC: 2

4 Jul 1996

5340-15-153-7747
Access Cover

151537747
02700A135500: RNCC: 5 | RNVC: 2
02700A135500: RNCC: 5 | RNVC: 9

28 Feb 2001

5340-15-050-8427
Butt Hinge

150508427
B15X90T58595-36: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-063-3332
Retaining Clip

150633332
1/45783/85: RNCC: 3 | RNVC: 2
14578385: RNCC: 5 | RNVC: 2

15 Oct 1982

5340-15-111-2785
Mending Plate

151112785
2007TAV4-6: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-109-3690
Angle Bracket

151093690
5137-262-17: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-153-3012
Clamping Catch

151533012
61-655-MS: RNCC: 2 | RNVC: 3
122603373: RNCC: 5 | RNVC: 3

13 Dec 2000

5340-15-101-4438
Loop Clamp

151014438
C 9: RNCC: 3 | RNVC: 2

8 Jun 1987

5340-15-150-2501
Hand Crank

151502501
A1000538: RNCC: 3 | RNVC: 2

31 Aug 1999

5340-15-105-8394
Retaining Band

151058394
002.3471.0: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-045-3470
Rod End Clevis

150453470
N0R5-225-00FP12: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-102-4670
Shelf Bracket

151024670
01-261-07-105: RNCC: 3 | RNVC: 2

19 Feb 1987

5340-15-111-9499
Butt Hinge Leaf

151119499
700A2603-003: RNCC: 3 | RNVC: 2

30 Jan 1991

5340-15-058-0916
Handle Grip

150580916
71061-10: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-060-5627
Loop Clamp

150605627
N8710CR15-30: RNCC: 3 | RNVC: 2

20 May 1977

5340-15-045-0321
Rod End Clevis

150450321
576-12-03-02: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-110-0306
Retaining Strap

151100306
23675-101B01: RNCC: 3 | RNVC: 2
23675-101B1: RNCC: 5 | RNVC: 2

15 Mar 1990

5340-15-178-3302
Access Cover

151783302
109-0857-20-109: RNCC: 3 | RNVC: 2

29 Apr 2005

5340-15-151-9633
Retaining Strap

151519633
0-173679: RNCC: 3 | RNVC: 2
00173679: RNCC: 3 | RNVC: 2
(241)A39630-173679: RNCC: 5 | RNVC: 2
1PA39630-173679: RNCC: 5 | RNVC: 2

27 Jul 2000

5340-15-194-5213
Mounting Plate

151945213
18HJ04543212S01-413: RNCC: 3 | RNVC: 2
(241)A001918HJ04543212S01-413: RNCC: 5 | RNVC: 2

30 Nov 2010

5340-15-112-2561
Retaining Strap

151122561
311A2173-001: RNCC: 3 | RNVC: 2

8 Mar 1991

5340-15-204-3409
Loop Clamp

152043409
0120RE49449: RNCC: 3 | RNVC: 2
(241)ACA640120RE49449: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-163-4078
Mounting Bracket

151634078
9959318: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-206-8155
Loop Clamp

152068155
ED0036301470-S: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-108-3105
Loop Clamp

151083105
10449790: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-059-4664
Luggage Lock

150594664
10-47-88-00: RNCC: 3 | RNVC: 2

10 Apr 1975

5340-15-199-2397
Loop Clamp

151992397
A708AA03: RNCC: 3 | RNVC: 2
(241)A0126A708AA03: RNCC: 5 | RNVC: 2

20 Feb 2005

5340-15-008-0566
Loop Clamp

150080566
1398307: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-064-4411
Handle Grip

150644411
1355-19-014: RNCC: 3 | RNVC: 2

1 Feb 1984

5340-15-205-3590
Caster Wheel

152053590
30-6164-27/4: RNCC: 3 | RNVC: 2

2 Mar 2012

5340-15-158-5225
Retaining Band

151585225
451A1015-005: RNCC: 3 | RNVC: 2

1 Mar 2004

5340-15-119-8306
Screw Thread Insert

151198306
MS45932/1-13L: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-100-6374
Bail Handle

151006374
314-0660/01: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-148-3520
Mending Plate

151483520
0-104921: RNCC: 3 | RNVC: 2
104921: RNCC: 3 | RNVC: 2
1PA39630-104921: RNCC: 5 | RNVC: 2

29 Jul 1998

5340-15-105-8393
Retaining Band

151058393
23256: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-003-1474
Mounting Bracket

150031474
5949791489: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-151-0041
Brake Disc

151510041
42115903: RNCC: 3 | RNVC: 2
(241)A396300119881: RNCC: 5 | RNVC: 2
0-119881: RNCC: 5 | RNVC: 2
42115903: RNCC: 5 | RNVC: 2

22 Feb 2000

5340-15-147-6309
Lock-Release Lever

151476309
P-1810/1: RNCC: 3 | RNVC: 2
5520489: RNCC: 5 | RNVC: 2

5 Feb 1998

5340-15-115-3395
Expansion Plug

151153395
500-9000-038: RNCC: 3 | RNVC: 2
82-01536: RNCC: 5 | RNVC: 2

29 Nov 1992

5340-15-061-4069
Angle Bracket

150614069
P-120230-001: RNCC: 3 | RNVC: 2
P120230-001: RNCC: 5 | RNVC: 2

19 Jan 1978

5340-15-115-3521
Retaining Strap

151153521
538-16-1500: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-117-1664
Angle Bracket

151171664
92793/105/CNI4203/A-06011: RNCC: 3 | RNVC: 2

12 Apr 1994

5340-15-179-9534
Mounting Bracket

151799534
0000500401316: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-119-5678
Mending Plate

151195678
4881304: RNCC: 3 | RNVC: 2

19 Sep 1994

5340-15-066-1699
Block Clamp

150661699
P-893032-001: RNCC: 3 | RNVC: 2
P893032-001: RNCC: 5 | RNVC: 2

10 Feb 1986

5340-15-116-5226
Access Cover

151165226
60115-102: RNCC: 3 | RNVC: 2

18 Nov 1993

5340-15-060-5690
Mending Plate

150605690
22291-102: RNCC: 3 | RNVC: 2

1 Jun 1977

5340-15-195-3916
Mounting Bracket

151953916
109-0718-11-113: RNCC: 3 | RNVC: 2

21 Mar 2011

5340-15-109-3771
Plain Solid Disk

151093771
5137-263-07: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-052-7275
Flush Catch

150527275
DIS1971TAV69-10: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-205-2463
Access Cover

152052463
109-0315-44-301: RNCC: 3 | RNVC: 2

29 Feb 2012

5340-15-008-6707
Flange Protector

150086707
A80567-01-08: RNCC: 3 | RNVC: 2
A80567-01-08: RNCC: 5 | RNVC: 2

27 Oct 1981

5340-15-102-1489
Rod End Clevis

151021489
8241-02-03: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-121-7155
Mounting Plate

151217155
60-13529-00: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-121-0601
Screw Thread Insert

151210601
M8(X1.25)X2D-ACC.INOX18/8AUST.P-: RNCC: 3 | RNVC: 1
210602567: RNCC: 5 | RNVC: 2

21 Sep 1995

5340-15-056-0111
Screw Thread Insert

150560111
2100-06325: RNCC: 3 | RNVC: 2
2100-02599: RNCC: 3 | RNVC: 2
M 10 X150 1D: RNCC: 5 | RNVC: 2

5 Apr 1994

5340-15-155-7788
Clamping Catch

151557788
723009209500: RNCC: 1 | RNVC: 2
27-HT070-155SS: RNCC: 1 | RNVC: 2

25 Jun 2002

5340-15-059-3446
Retaining Strap

150593446
1127-32-274: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-102-4681
Butt Hinge Leaf

151024681
01-261-10-170: RNCC: 3 | RNVC: 2

19 Feb 1987

5340-15-196-8962
Retaining Band

151968962
PN UAS 00044057: RNCC: 3 | RNVC: 2
3470F76036636: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-066-0391
Retaining Strap

150660391
1127-44-708: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-147-9031
Access Cover

151479031
237ABE030-1: RNCC: 3 | RNVC: 2

18 May 1998

5340-15-102-8531
Butt Hinge

151028531
213A7165-401: RNCC: 3 | RNVC: 2

16 Dec 1988

5340-15-112-3822
Loop Clamp

151123822
00.1917: RNCC: 3 | RNVC: 2

1 Jul 1990

5340-15-147-0807
Strap Hinge

151470807
51242: RNCC: 3 | RNVC: 2

21 Aug 1997

5340-15-201-6261
Butt Hinge

152016261
0756-75606: RNCC: 3 | RNVC: 2
(241)AF604CLABMEC054: RNCC: 5 | RNVC: 2
C-LAB-MEC-054: RNCC: 5 | RNVC: 2

2 Nov 2006

5340-15-009-3001
Butt Hinge Leaf

150093001
2-54723-106-73710: RNCC: 3 | RNVC: 2

2 Sep 1980

5340-15-004-8903
Angle Bracket

150048903
S205-3-033-18: RNCC: 3 | RNVC: 2
S205-3-033-18: RNCC: 5 | RNVC: 9

31 Aug 1978

5340-15-178-4246
Access Cover

151784246
RAF-5055/01: RNCC: 3 | RNVC: 2

31 May 2005

5340-15-066-0698
Catch Strike

150660698
1377595: RNCC: 3 | RNVC: 2
1377595: RNCC: 5 | RNVC: 9

8 May 1985

5340-15-002-3148
Mounting Bracket

150023148
504373476: RNCC: 3 | RNVC: 2

6 Aug 2013

5340-15-152-2335
Mounting Plate

151522335
39A510-12-10-24: RNCC: 3 | RNVC: 2

17 Aug 2000

5340-15-073-5244
Flush Lock

150735244
13A65X45-1LEVA: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-150-6464
Mounting Bracket

151506464
5125033: RNCC: 3 | RNVC: 2

20 Dec 1999

5340-15-109-6156
Spring Holder

151096156
518461-01: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-153-4471
Loop Clamp

151534471
EN4113F22WH: RNCC: 2 | RNVC: 2

25 Jan 2001

5340-15-001-1112
Mounting Bracket

150011112
5801360094: RNCC: 3 | RNVC: 2

31 May 2013

5340-15-178-7475
Mounting Bracket

151787475
057470: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-001-5975
Mounting Bracket

150015975
5801618868: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-114-2500
Loop Clamp

151142500
LE-X-PP-N3-20: RNCC: 3 | RNVC: 2

12 May 1993

5340-15-178-6382
Loop Clamp

151786382
2900.178.0018: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-113-7129
Loop Clamp

151137129
9981394: RNCC: 3 | RNVC: 2

10 Feb 1992

5340-15-007-6114
Spring Tension Clip

150076114
P-110598-001: RNCC: 3 | RNVC: 2
P110598-001: RNCC: 5 | RNVC: 2

7 Mar 1980

5340-15-062-4759
Access Door Hinge

150624759
109-0503-19-2: RNCC: 3 | RNVC: 2

29 Apr 1982

5340-15-058-9950
Angle Bracket

150589950
1127-18-147: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-009-8862
Plain Solid Disk

150098862
1236-62-100: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-150-8472
Mounting Bracket

151508472
00085426: RNCC: 3 | RNVC: 2

1 Feb 2000

5340-15-056-5008
Mortise Lock Set

150565008
DIS1971TAV025: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-122-2800
Loop Clamp

151222800
800056800: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-051-2459
Angle Bracket

150512459
TM478863-55: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-112-9344
Loop Clamp

151129344
21612014A: RNCC: 3 | RNVC: 2

20 Apr 1996

5340-15-055-7747
Angle Bracket

150557747
50041029-2: RNCC: 3 | RNVC: 2

16 Dec 1973

5340-15-062-7908
Retaining Strap

150627908
0-34157: RNCC: 3 | RNVC: 2

28 Aug 1982

5340-15-001-8319
Mounting Bracket

150018319
5949790535: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-203-1551
Latch Bar

152031551
212-1300-97-101: RNCC: 3 | RNVC: 2

27 Nov 2007

5340-15-062-3698
Angle Bracket

150623698
012088 M: RNCC: 3 | RNVC: 2

1 Apr 1998

5340-15-187-8204
Mounting Bracket

151878204
018.066.00.40: RNCC: 3 | RNVC: 2
(241)A6479018.066.00.40: RNCC: 5 | RNVC: 2
018.066.00.40: RNCC: 5 | RNVC: 2

7 May 2009

5340-15-064-1824
Loop Clamp

150641824
4674412: RNCC: 3 | RNVC: 2

27 Apr 1983

5340-15-153-3014
Butt Hinge

151533014
122603418: RNCC: 2 | RNVC: 3

13 Dec 2000

5340-15-059-9330
Rod End Clevis

150599330
63963-001: RNCC: 3 | RNVC: 2

28 Oct 1976

5340-15-117-0650
Loop Clamp

151170650
10418300: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-001-8321
Mounting Bracket

150018321
5949790567: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-151-1905
Mounting Bracket

151511905
IAXX0191204: RNCC: 3 | RNVC: 2

14 Apr 2000

5340-15-153-9078
Mounting Bracket

151539078
00085406: RNCC: 3 | RNVC: 2
(241)A333400085406: RNCC: 4 | RNVC: 1
9540T6: RNCC: 5 | RNVC: 2

9 Mar 2001

5340-15-204-4402
Flush Lock

152044402
920.2: RNCC: 3 | RNVC: 2
(241)A2925920.2: RNCC: 5 | RNVC: 2

7 Nov 2011

5340-15-058-6740
Recess Handle

150586740
1971-49-9: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-178-7446
Access Cover

151787446
027594: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-153-4482
Loop Clamp

151534482
EN4113F06WH1: RNCC: 2 | RNVC: 2

25 Jan 2001

5340-15-204-8309
Retaining Band

152048309
5309 3,6X140 NY: RNCC: 3 | RNVC: 2
(241)AK06253093,6X140NY: RNCC: 5 | RNVC: 2

13 Jan 2012

5340-15-005-6634
Retaining Clip

150056634
4386560: RNCC: 3 | RNVC: 2
4386560: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-121-0756
Loop Clamp

151210756
1084.003: RNCC: 3 | RNVC: 2

4 Oct 1995

5340-15-174-7017
Mounting Bracket

151747017
ECN40SB-98: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-118-3395
Loop Clamp

151183395
60140996: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-204-3616
Bolt And Spacer Kit

152043616
42729001: RNCC: 3 | RNVC: 2
(241)ACA6442729001: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-045-3555
Loop Clamp

150453555
740-12-45: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-101-4861
Angle Bracket

151014861
1376-52-144: RNCC: 3 | RNVC: 2
137652144: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-120-1636
Bail Handle

151201636
380-0456/01: RNCC: 3 | RNVC: 2

17 Jan 1995

5340-15-068-9698
Lock-Release Lever

150689698
AL.100-02F-68: RNCC: 3 | RNVC: 2
AL 100-02F-68: RNCC: 5 | RNVC: 2

9 Jun 1986

5340-15-004-8884
Webbing Strap

150048884
204-0900-14-2: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-121-6265
Loop Clamp

151216265
800027521: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-008-1471
Loop Clamp

150081471
0-34121: RNCC: 3 | RNVC: 2

9 Jun 1981

5340-15-151-1698
Mounting Bracket

151511698
AF060182002: RNCC: 3 | RNVC: 2

14 Apr 2000

5340-15-118-9241
Mounting Bracket

151189241
73153652: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-073-8917
Flush Lock

150738917
13B65X50-3LEVE: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-162-9946
Access Cover

151629946
0009448234: RNCC: 3 | RNVC: 2
9448234: RNCC: 5 | RNVC: 2

9 Apr 2002

5340-15-193-1484
Control Rod

151931484
504127362: RNCC: 3 | RNVC: 2
(241)A4249504127362: RNCC: 5 | RNVC: 2

20 Apr 2010

5340-15-001-7865
Mounting Plate

150017865
5949789735: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-118-2034
Screw Thread Insert

151182034
17847870: RNCC: 3 | RNVC: 2

22 Apr 1994

5340-15-205-4202
Retaining Strap

152054202
178905209: RNCC: 3 | RNVC: 2
(241)A0199178905209: RNCC: 5 | RNVC: 2

8 Mar 2012

5340-15-109-7230
Plug Button

151097230
60138839: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-064-5878
Retaining Band

150645878
60111481: RNCC: 3 | RNVC: 2

17 Nov 1983

5340-15-118-4435
Angle Bracket

151184435
60154189: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-107-8920
Cushioning Pad

151078920
GA6: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-109-3077
Expansion Plug

151093077
4251628: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-118-4000
Angle Bracket

151184000
60161140: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-152-1672
Clamp Bolt Assembly

151521672
86001TG: RNCC: 3 | RNVC: 2
(241)A380486001TG: RNCC: 5 | RNVC: 2

9 Aug 2000

5340-15-119-0160
Angle Bracket

151190160
70644917: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-112-9163
Expansion Plug

151129163
59369: RNCC: 3 | RNVC: 2

12 Jun 1993

5340-15-164-1893
Angle Bracket

151641893
5895940: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-204-4401
Permanent Magnet

152044401
L66900063: RNCC: 3 | RNVC: 2
(241)A0302L66900063: RNCC: 5 | RNVC: 2

7 Nov 2011

5340-15-118-8620
Access Cover

151188620
299709577F: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-065-1111
Retaining Strap

150651111
141413: RNCC: 3 | RNVC: 2

6 Mar 1984

5340-15-189-1386
Control Rod

151891386
60182558: RNCC: 3 | RNVC: 2
(241)A424960182558: RNCC: 5 | RNVC: 2

28 Jan 2010

5340-15-120-3550
Angle Bracket

151203550
60174799: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-204-8855
Retaining Band

152048855
L66532162: RNCC: 3 | RNVC: 2
(241)A0302L66532162: RNCC: 5 | RNVC: 2

23 Jan 2012

5340-15-148-1556
Mending Plate

151481556
60166183: RNCC: 3 | RNVC: 2
(7001)2510151481556: RNCC: 5 | RNVC: 2

25 Jun 1998

5340-15-107-5075
Retaining Band

151075075
8963483: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-179-9019
Block Clamp

151799019
D1404693: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-005-1850
Handle Grip

150051850
4049080: RNCC: 3 | RNVC: 2
4049080: RNCC: 5 | RNVC: 2
4049080: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-119-4031
Angle Bracket

151194031
60173217: RNCC: 3 | RNVC: 2

25 Jul 1994

5340-15-061-5034
Handle Grip

150615034
P26DA37: RNCC: 5 | RNVC: 2
P26DA37: RNCC: 5 | RNVC: 9

12 Oct 1977

5340-15-152-1043
Angle Bracket

151521043
60139398: RNCC: 3 | RNVC: 2

7 Aug 2000

5340-15-205-7758
Mechanical Stop

152057758
182707216: RNCC: 3 | RNVC: 2
(241)A0199182707216: RNCC: 5 | RNVC: 2

3 Apr 2012

5340-15-123-0675
Angle Bracket

151230675
4714876: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-003-8898
Access Cover

150038898
182713180: RNCC: 3 | RNVC: 2
(241)A0199182713180: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-119-1797
Angle Bracket

151191797
75214491: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-001-5592
Door Hook

150015592
504381803: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-060-7017
Mending Plate

150607017
P36HB15: RNCC: 5 | RNVC: 2
P36HB15: RNCC: 5 | RNVC: 9

12 Sep 1977

5340-15-177-3940
Bridge Clamp

151773940
036965: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-112-4030
Access Cover

151124030
R105222: RNCC: 3 | RNVC: 2

2 Nov 1995

5340-15-150-2488
Mending Plate

151502488
A0703400: RNCC: 3 | RNVC: 2

31 Aug 1999

5340-15-180-8119
Hand Crank

151808119
585774/801: RNCC: 3 | RNVC: 2

24 Jul 2008

5340-15-120-4448
Mending Plate

151204448
142514941: RNCC: 3 | RNVC: 2

25 May 1995

5340-15-008-0764
Angle Bracket

150080764
60114208: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-179-8993
Section Block Clamp

151798993
D1405146: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-201-4628
Mounting Bracket

152014628
N324G2124201: RNCC: 3 | RNVC: 2
(241)A0126N324G2124201: RNCC: 5 | RNVC: 2

24 Sep 2006

5340-15-207-3534
Door Handle

152073534
A20489-G1: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-15-118-0078
Rod End Clevis

151180078
1P 548224: RNCC: 3 | RNVC: 2
1P 548224: RNCC: 5 | RNVC: 9

28 Jan 1995

5340-15-005-3630
Angle Bracket

150053630
4319590: RNCC: 3 | RNVC: 2
4319590: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-119-7941
Access Cover

151197941
73124522: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-063-3235
Angle Bracket

150633235
60108252: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-202-3686
Retaining Band

152023686
RE49456: RNCC: 3 | RNVC: 2

5 Mar 2007

5340-15-116-4805
Angle Bracket

151164805
60165660: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-157-6420
Block Clamp

151576420
AIT13901EKHH8330: RNCC: 3 | RNVC: 2

12 Oct 2003

5340-15-006-3153
Retaining Strap

150063153
15MW2009-1: RNCC: 5 | RNVC: 2
15MW2009-1: RNCC: 5 | RNVC: 2
15MW2009-1: RNCC: 5 | RNVC: 9
15MW2009-1: RNCC: 5 | RNVC: 9

24 Nov 1979

5340-15-002-8113
Mounting Bracket

150028113
504382037: RNCC: 3 | RNVC: 2

3 Oct 2013

5340-15-189-3456
Hand Crank

151893456
59701A015001: RNCC: 3 | RNVC: 2
(241)A081059701A015001: RNCC: 5 | RNVC: 2

16 Feb 2010

5340-15-118-4019
Angle Bracket

151184019
60158741: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-170-9081
Loop Clamp

151709081
71404505: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-155-4540
Retaining Clip

151554540
HC3503G: RNCC: 3 | RNVC: 2
1PA0226HC3503G: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-15-003-9192
Blank Panel

150039192
182742011: RNCC: 3 | RNVC: 2
(241)A0199182742011: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-002-7868
Bow Handle

150027868
382: RNCC: 3 | RNVC: 2

2 Oct 2013

5340-15-121-9880
Angle Bracket

151219880
60177328: RNCC: 3 | RNVC: 2

4 Apr 1996

5340-15-002-1360
Mounting Bracket

150021360
5801458875: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-009-1255
Screw Thread Insert

150091255
IS05X80CN10: RNCC: 3 | RNVC: 2

10 Apr 1980

5340-15-051-3256
Loop Clamp

150513256
4505292: RNCC: 3 | RNVC: 2
4505292: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-179-6949
Mounting Bracket

151796949
0000500413767: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-062-3697
Angle Bracket

150623697
012242 T: RNCC: 3 | RNVC: 2

1 May 1977

5340-15-000-6099
Block Clamp

150006099
A464A008A: RNCC: 3 | RNVC: 2

22 Mar 2013

5340-15-007-1924
Loop Clamp

150071924
1380454: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-203-7002
Flare Lock Fastener

152037002
1229: RNCC: 3 | RNVC: 2

27 Jun 2011

5340-15-121-3300
Mounting Bracket

151213300
A140027-1: RNCC: 3 | RNVC: 2

7 Nov 1995

5340-15-007-6288
Angle Bracket

150076288
P-135578-011: RNCC: 3 | RNVC: 2
P135578-011: RNCC: 5 | RNVC: 2

8 Mar 1980

5340-15-153-2895
Handle Grip

151532895
122505502: RNCC: 2 | RNVC: 3

13 Dec 2000

5340-15-155-5236
Catch Strike

151555236
(241)A5015DE160.02.226: RNCC: 3 | RNVC: 2
DE160.02.226: RNCC: 3 | RNVC: 2

8 Apr 2002

5340-15-117-8451
Protection Bellows

151178451
533137: RNCC: 3 | RNVC: 2
P009279937135006: RNCC: 5 | RNVC: 2

28 Jan 1994

5340-15-065-2693
Retaining Strap

150652693
W 008547A: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-107-2864
Mending Plate

151072864
69947: RNCC: 3 | RNVC: 2

20 Apr 1994

5340-15-108-6276
Retaining Strap

151086276
8583463: RNCC: 3 | RNVC: 2
(7001)5340151086276: RNCC: 5 | RNVC: 2

30 Mar 1988

5340-15-122-0097
Angle Bracket

151220097
60176993: RNCC: 3 | RNVC: 2

10 Apr 1996

5340-15-118-6105
Mending Plate

151186105
73133110: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-148-1995
Access Cover

151481995
6658.010: RNCC: 3 | RNVC: 2

1 Jul 1998

5340-15-187-9082
Protection Bellows

151879082
5132032: RNCC: 3 | RNVC: 2

20 May 2009

5340-15-007-2524
Angle Bracket

150072524
1374072: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-108-3114
Angle Bracket

151083114
60129735: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-155-9495
Protection Bellows

151559495
500386235: RNCC: 3 | RNVC: 2

14 Oct 2002

5340-15-005-0458
Webbing Strap

150050458
0-33365: RNCC: 3 | RNVC: 2
00033365: RNCC: 4 | RNVC: 1
(241)A396300033365: RNCC: 5 | RNVC: 2

7 Sep 1977

5340-15-193-1636
Threaded Rod End

151931636
504159478: RNCC: 3 | RNVC: 2
(241)A4249504159478: RNCC: 5 | RNVC: 2

20 Apr 2010

5340-15-186-7733
Mounting Plate

151867733
0000504298533: RNCC: 3 | RNVC: 2
504298533: RNCC: 3 | RNVC: 2
(241)A4249504298533: RNCC: 5 | RNVC: 2

5 Jan 2009

5340-15-170-8954
Plug Button

151708954
71474340: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-150-8514
Mounting Bracket

151508514
00075014: RNCC: 3 | RNVC: 2

1 Feb 2000

5340-15-064-5886
Loop Clamp

150645886
4659221: RNCC: 3 | RNVC: 2

17 Nov 1983

5340-15-118-7550
Retaining Strap

151187550
9434760: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-101-4413
Bow Handle

151014413
W012711: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-121-6470
Mounting Plate

151216470
800047827: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-145-1479
Screw Thread Insert

151451479
01320040008: RNCC: 3 | RNVC: 2

19 May 1997

5340-15-074-3985
Retaining Strap

150743985
20UNI2136: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-001-7290
Retaining Band

150017290
111-85319: RNCC: 3 | RNVC: 2

15 Jul 2013

5340-15-109-5750
Retaining Strap

151095750
21610084B: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-003-8975
Mounting Plate

150038975
182741078: RNCC: 3 | RNVC: 2
(241)A0199182741078: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-063-3247
Retaining Strap

150633247
60111265: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-109-1794
Retaining Strap

151091794
60101031: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-116-9650
Access Cover

151169650
B515MPC003: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-151-8687
Mending Plate

151518687
60118052: RNCC: 3 | RNVC: 2

14 Jul 2000

5340-15-001-0457
Strapping

150010457
LB12: RNCC: 3 | RNVC: 2
00057711: RNCC: 5 | RNVC: 2

21 May 2013

5340-15-109-7413
Angle Bracket

151097413
60134002: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-003-9127
Mounting Plate

150039127
182741331: RNCC: 3 | RNVC: 2
(241)A0199182741331: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-109-4741
Rod End Connector

151094741
1P 565964: RNCC: 3 | RNVC: 2
1P 565964: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-063-5968
Retaining Strap

150635968
5941012: RNCC: 3 | RNVC: 2
5941012: RNCC: 5 | RNVC: 9

13 Nov 1982

5340-15-119-1576
Access Cover

151191576
75208185: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-121-6415
Mounting Plate

151216415
800042100: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-121-0620
Screw Thread Insert

151210620
M8(X1)X2D: RNCC: 3 | RNVC: 2
210002568: RNCC: 5 | RNVC: 2

21 Sep 1995

5340-15-065-4580
Loop Clamp

150654580
ABA-5: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-15-119-5683
Angle Bracket

151195683
4881332: RNCC: 3 | RNVC: 2

19 Sep 1994

5340-15-001-5923
Mounting Bracket

150015923
42566678: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-062-5345
Retaining Strap

150625345
168236 E: RNCC: 3 | RNVC: 2

1 May 1977

5340-15-177-5929
Loop Clamp

151775929
1P 611485: RNCC: 3 | RNVC: 2

13 May 2004

5340-15-198-5832
T Plate

151985832
08227-101: RNCC: 3 | RNVC: 2

15 Oct 2004

5340-15-001-8361
Mounting Bracket

150018361
5949790811: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-178-4694
Angle Bracket

151784694
DYA051: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-179-6783
Mounting Plate

151796783
00185376: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-103-1007
Loop Clamp

151031007
DE013.12.555: RNCC: 3 | RNVC: 2
(241)A5015DE013.12.555: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-205-3123
Bolt And Spacer Kit

152053123
5TIR108232: RNCC: 3 | RNVC: 2

2 Mar 2012

5340-15-198-8113
Loop Clamp

151988113
18087792: RNCC: 3 | RNVC: 2

17 Nov 2004

5340-15-003-3857
Mounting Bracket

150033857
ED0089003270-S: RNCC: 3 | RNVC: 2

5 Nov 2013

5340-15-180-8121
Hand Crank

151808121
508160/801: RNCC: 3 | RNVC: 2

24 Jul 2008

5340-15-119-9788
Rod End Connector

151199788
78421F01: RNCC: 3 | RNVC: 2
78421F01: RNCC: 5 | RNVC: 9

28 May 1996

5340-15-118-7555
Mounting Bracket

151187555
9434904: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-107-6946
Loop Clamp

151076946
12174790: RNCC: 3 | RNVC: 2

9 May 1985

5340-15-178-2851
Access Cover

151782851
8.609.104: RNCC: 3 | RNVC: 2

29 Apr 2005

5340-15-187-1832
Strap Hinge

151871832
SC 100 721: RNCC: 3 | RNVC: 2
(241)A3980SC100721: RNCC: 5 | RNVC: 2

24 Feb 2009

5340-15-007-3003
Loop Clamp

150073003
98197723: RNCC: 3 | RNVC: 2

7 Jan 2014

5340-15-121-8985
Loop Clamp

151218985
132506904: RNCC: 3 | RNVC: 2

19 Mar 1996

5340-15-001-8040
Pipe Hanger

150018040
5949787570: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-179-9518
Loop Clamp

151799518
41012692: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-118-6990
Mounting Bracket

151186990
73128498: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-206-2865
Access Cover

152062865
ED0027504160-S: RNCC: 3 | RNVC: 2

1 Jun 2012

5340-15-119-1642
Mounting Bracket

151191642
75208325: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-002-6335
Blank Panel

150026335
182742119: RNCC: 3 | RNVC: 2

11 Sep 2013

5340-15-205-9815
Mounting Bracket

152059815
TAPA SKY 101: RNCC: 1 | RNVC: 2
(241)A6231TAPASKY101: RNCC: 3 | RNVC: 2

27 Apr 2012

5340-15-186-8624
Mounting Bracket

151868624
1R342642LA: RNCC: 3 | RNVC: 2

5 Jan 2009

5340-15-118-7224
Mounting Bracket

151187224
79023667: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-150-1035
Mounting Bracket

151501035
120013651: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-118-7036
Mounting Bracket

151187036
73130955: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-207-0043
Mounting Bracket

152070043
4186T99G01: RNCC: 3 | RNVC: 2
(241)A34604186T99G01: RNCC: 5 | RNVC: 2

8 Aug 2012

5340-15-001-8236
Mounting Bracket

150018236
5949784411: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-121-0612
Screw Thread Insert

151210612
M8(X1)X1D: RNCC: 3 | RNVC: 2
210002508: RNCC: 5 | RNVC: 2

21 Sep 1995

5340-15-204-8430
Retaining Strap

152048430
A487A002A: RNCC: 3 | RNVC: 2

17 Jan 2012

5340-15-147-5672
Mechanical Stop

151475672
9180.047: RNCC: 3 | RNVC: 2

30 Dec 1997

5340-15-152-7347
Filler Opening Cap

151527347
10044: RNCC: 3 | RNVC: 2
(241)A333410044: RNCC: 4 | RNVC: 1
2004T4: RNCC: 5 | RNVC: 2

19 Oct 2000

5340-15-141-2872
Retaining Band

151412872
427: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-120-3555
Angle Bracket

151203555
60176567: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-074-3995
Retaining Strap

150743995
10UNI2137: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-150-9904
Threaded Rod End

151509904
60138086: RNCC: 3 | RNVC: 2

21 Feb 2000

5340-15-107-9526
Hand Crank

151079526
RS412149AE: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-153-5164
Vent Plug

151535164
142006103: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-005-5078
Plug Button

150055078
1382220: RNCC: 3 | RNVC: 2
1382220: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-103-1905
Door Closer Dog

151031905
DE013.12.800: RNCC: 3 | RNVC: 2
DE013.12.800: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-147-6938
Access Cover

151476938
49: RNCC: 3 | RNVC: 2

3 Mar 1998

5340-15-109-4730
Mending Plate

151094730
1P 579309: RNCC: 3 | RNVC: 2
1P 579309: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-151-7011
Retaining Strap

151517011
60121347: RNCC: 3 | RNVC: 2

3 Jul 2000

5340-15-004-7799
Retaining Strap

150047799
0-15082: RNCC: 3 | RNVC: 2

7 Sep 1977

5340-15-074-3949
Retaining Strap

150743949
C22UNAX1046A37UN1743CD: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-001-8168
Mounting Bracket

150018168
5949779149: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-149-1126
Angle Bracket

151491126
60176975: RNCC: 3 | RNVC: 2

2 Dec 1998

5340-15-113-1721
Rod End Clevis

151131721
331A2051-003: RNCC: 3 | RNVC: 2

7 Sep 1990

5340-15-045-2944
Block Clamp

150452944
M4-4-4-2-2: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-045-2925
Loop Clamp

150452925
N0R2-505-06-13B: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-108-3053
Vent Plug

151083053
60126197: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-153-7066
Access Cover

151537066
142012905: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-120-2507
Catch Strike

151202507
60144954: RNCC: 3 | RNVC: 2

6 Mar 1995

5340-15-150-0960
Protection Bellows

151500960
055090261: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-113-3536
Spring Tension Clip

151133536
79039097: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-205-2835
Handwheel

152052835
0032.0337: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-179-5465
Mending Plate

151795465
76039718: RNCC: 3 | RNVC: 2

2 Mar 2007

5340-15-118-1121
Vent Plug

151181121
1P 579038: RNCC: 3 | RNVC: 2
1P 579038: RNCC: 5 | RNVC: 9

22 Mar 1996

5340-15-101-7953
Roller Holder

151017953
GE7251050: RNCC: 3 | RNVC: 2

30 Sep 1987

5340-15-121-7388
Mending Plate

151217388
60158839.11.00.01: RNCC: 3 | RNVC: 2
93158752: RNCC: 5 | RNVC: 2

12 Feb 1996

5340-15-119-0300
Angle Bracket

151190300
70695523: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-003-1349
Mounting Bracket

150031349
504062462: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-006-4161
Handle Grip

150064161
73059-1: RNCC: 3 | RNVC: 2

3 Dec 1979

5340-15-063-7310
Mending Plate

150637310
40.50.01.339: RNCC: 3 | RNVC: 2
19.23.58.00: RNCC: 5 | RNVC: 2

30 May 1983

5340-15-115-3537
Exit Bolt

151153537
538-20-1550: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-061-5735
Angle Bracket

150615735
P-135234-001: RNCC: 3 | RNVC: 2
P135234-001: RNCC: 5 | RNVC: 2

3 Feb 1978

5340-15-062-2737
Mending Plate

150622737
1141-31-137: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-112-7726
Rod End Clevis

151127726
020.015137: RNCC: 5 | RNVC: 9

7 Sep 1989

5340-15-055-8678
Rod End Clevis

150558678
260-11-58-02: RNCC: 3 | RNVC: 2
SF260-14-58-02: RNCC: 5 | RNVC: 2
SF260-14-58-02: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-195-3008
Mounting Bracket

151953008
STB-400: RNCC: 3 | RNVC: 2
STB-400: RNCC: 3 | RNVC: 2
(241)A8460STB-400: RNCC: 5 | RNVC: 2

14 Mar 2011

5340-15-178-1242
Access Cover

151781242
20030938: RNCC: 3 | RNVC: 2

14 Feb 2005

5340-15-062-5276
Mending Plate

150625276
1113-17-158: RNCC: 3 | RNVC: 2
1113-17.158: RNCC: 5 | RNVC: 2

2 Dec 1981

5340-15-007-2410
Retaining Strap

150072410
4002890: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-151-2665
Angle Bracket

151512665
00084974: RNCC: 3 | RNVC: 2

4 May 2000

5340-15-216-8037
Handle Grip

152168037
717345062: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-002-3060
Access Door Hinge

150023060
504372681: RNCC: 3 | RNVC: 2

5 Aug 2013

5340-15-120-2650
Expansion Plug

151202650
14567487: RNCC: 3 | RNVC: 2

9 Mar 1995

5340-15-057-5804
Retaining Strap

150575804
STAND954: RNCC: 3 | RNVC: 2
STAND954: RNCC: 5 | RNVC: 9

6 Dec 1972

5340-15-153-2913
Handle Grip

151532913
122505721: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-15-002-1725
Retaining Strap

150021725
5801346908: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-007-9862
Retaining Strap

150079862
4614111: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-112-9352
Angle Bracket

151129352
20530890A: RNCC: 3 | RNVC: 2

11 Apr 1994

5340-15-148-3471
Mending Plate

151483471
104496: RNCC: 3 | RNVC: 2

29 Jul 1998

Load More Results