What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 28 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 28 of 72

5340-15-116-1098
Plain Solid Disk

151161098
DPR24130/2-32: RNCC: 3 | RNVC: 2

11 Oct 1993

5340-15-157-9338
Angle Bracket

151579338
0-102531: RNCC: 3 | RNVC: 2
(241)A39630-102531: RNCC: 5 | RNVC: 2
1PA39630-102531: RNCC: 5 | RNVC: 2

25 Nov 2003

5340-15-150-6698
Handle Grip

151506698
SF260-12-108-03: RNCC: 3 | RNVC: 2

20 Dec 1999

5340-15-102-4622
Loop Clamp

151024622
01-261-14-126: RNCC: 3 | RNVC: 2

13 Jul 1987

5340-15-020-2502
Loop Clamp

150202502
01-097-01-78: RNCC: 3 | RNVC: 2
55.49.043.A: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-112-8753
Angle Bracket

151128753
60140313: RNCC: 3 | RNVC: 2

16 Sep 1989

5340-15-107-0665
Retaining Clip

151070665
B04-07: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-103-7435
Lock-Release Lever

151037435
1376-05-429: RNCC: 3 | RNVC: 2
137605429: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-027-3672

5340-15-120-8974
Manual Control Lever

151208974
149243 FIND NO.17: RNCC: 3 | RNVC: 2
21490255: RNCC: 3 | RNVC: 2

4 Sep 1995

5340-15-015-0884

5340-15-015-1610
Mounting Bracket

5340-15-147-1063
Connecting Stub

151471063
1Q701810: RNCC: 3 | RNVC: 2

13 Sep 2000

5340-15-019-9259
Dust Protective Cap

5340-15-166-4883
Lucchetto Da M/M 40

151664883
LUCCHETT040: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-155-4451
Half Ring A/O

151554451
CBD71182P02: RNCC: 3 | RNVC: 2

25 Mar 2002

5340-15-117-4340
Pressacavo 1/2 Gas

151174340
570.111: RNCC: 3 | RNVC: 2

11 Oct 1993

5340-15-121-6335
Plaquette S/Optique

151216335
800036246: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-155-4853
Support A/O

151554853
CBD71185P01: RNCC: 3 | RNVC: 2

27 Mar 2002

5340-15-155-4969
Support A/O

151554969
CBD70791P08: RNCC: 3 | RNVC: 2

28 Mar 2002

5340-15-166-4903
Fermo Ant/Post.

151664903
SL10640: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-155-4871
Support A/O

151554871
CBD71188P01: RNCC: 3 | RNVC: 2

27 Mar 2002

5340-15-155-4429
Support A/O

151554429
CBD71048P03: RNCC: 3 | RNVC: 2

25 Mar 2002

5340-15-156-2072
Suppor M.F.M.U. A/O

151562072
CBD71066P09: RNCC: 3 | RNVC: 2
(241)A3460CBD71066P09: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-155-4581
Washing Fl Tank A/O

151554581
CBD71287P01: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-15-155-4848
Support Ring A/O

151554848
CBD71185P02: RNCC: 3 | RNVC: 2

27 Mar 2002

5340-15-180-9635
Guide Bullet A/O

151809635
CBD71125G01: RNCC: 3 | RNVC: 2
(241)A3460CBD71125G01: RNCC: 5 | RNVC: 2

4 Sep 2008

5340-15-156-3291
Hook A/O

151563291
CBN71295P20: RNCC: 3 | RNVC: 2
(241)A3460CBN71295P20: RNCC: 3 | RNVC: 2

28 Jan 2003

5340-15-155-4419
Lpt Rotor Stand A/O

151554419
CBD71046P01: RNCC: 3 | RNVC: 2

25 Mar 2002

5340-15-156-2128
Selector A/O

151562128
(241)A3460CBD70761P09: RNCC: 3 | RNVC: 2
CBD70761P09: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-155-4925
Dx Base A/O

151554925
CBD70790P01: RNCC: 3 | RNVC: 2

28 Mar 2002

5340-15-121-6359
Galet S/Barillet

151216359
800038520: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-212-5135
Tasselli Esb/Vl 8X4

152125135
ESB/VL8: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-218-3491
Morsetto Zincato 1/

152183491
16-1/4: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-152-0513
Hddu L/F Bracket

151520513
8854 125-161: RNCC: 3 | RNVC: 2

3 Aug 2000

5340-15-152-0511
Rdu R/F Bracket

151520511
8854 125-141: RNCC: 3 | RNVC: 2

3 Aug 2000

5340-15-194-8700
Plug C/W O Ring

151948700
70591: RNCC: 3 | RNVC: 2
10/906479: RNCC: 5 | RNVC: 2

27 Jan 2011

5340-15-121-6325
Levier S/Biellette

151216325
800035937: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-217-2131
Fasteners 3/32'

152172131
MM439WNX1: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-213-8243
Serratura C/Cilindr

152138243
B00862-60-05: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-155-4964
Stopper A/O

151554964
CBD70791P03: RNCC: 3 | RNVC: 2

28 Mar 2002

5340-15-156-3676
Lower A Support A/O

151563676
CBD71405P02: RNCC: 3 | RNVC: 2
(241)A3460CBD71405P02: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-155-4961
Upper Ring A/O

151554961
CBD70789P03: RNCC: 3 | RNVC: 2

28 Mar 2002

5340-15-154-9274
Attach A/O

151549274
CBD70784P03: RNCC: 3 | RNVC: 2

12 Nov 2001

5340-15-217-6415
Plug 6/4

152176415
AISPL64: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-155-4430
Plug A/O Centering

151554430
CBD71048P05: RNCC: 3 | RNVC: 2

25 Mar 2002

5340-15-156-3313
Output Pipe A/O

151563313
(241)A3460CBN71297P05: RNCC: 3 | RNVC: 2
CBN71297P05: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-15-155-4634
Support Plate A/O

151554634
CBD71280P03: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-15-235-7142
Puleggia C/Riduttor

152357142
GAZ 7554: RNCC: 3 | RNVC: 2
534015E092472: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-195-7759
Vent/Jalousie Grill

151957759
85339101: RNCC: 3 | RNVC: 2
632-011: RNCC: 5 | RNVC: 2

10 May 2011

5340-15-155-4956
Support A/O

151554956
CBD70772P03: RNCC: 3 | RNVC: 2

28 Mar 2002

5340-15-170-8024
Fondo Forato Uhf/Sh

151708024
340-0245/02: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-154-9197
Support Plate A/O

151549197
CBD70713P02: RNCC: 3 | RNVC: 2

12 Nov 2001

5340-15-151-2710
Equipment Bag Viu/T

151512710
8835111-101: RNCC: 3 | RNVC: 2

4 May 2000

5340-15-139-4071
Canaletto F/31

151394071
4604634: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-156-2142
Support A/O

151562142
CBD71068P01: RNCC: 3 | RNVC: 2
(241)A3460CBD71068P01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-217-2132
Fasteners 3/16'

152172132
MM439WNX4: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-122-2622
Caoutchouc S/Culass

151222622
800034206: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-174-7597
Stagno/Piombo

151747597
63810-02/111: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-155-4580
Front Acc Cover A/O

151554580
CBD71288P01: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-15-216-7871
Ancorante Slm12 C/V

152167871
0624: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-213-8754
Terminale Asta D/S

152138754
MA4509: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-189-7012
Staffa Tv Lcd 40/63

151897012
LCD-PL250: RNCC: 3 | RNVC: 2

26 Feb 2010

5340-15-152-0510
Rdu L/F Bracket

151520510
8854 125-131: RNCC: 3 | RNVC: 2

3 Aug 2000

5340-15-217-2129
Fasteners 3/32'

152172129
MM439WNXL1: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-155-4949
Tube A/O

151554949
CBD71131P03: RNCC: 3 | RNVC: 2

28 Mar 2002

5340-15-155-4442
Support A/O

151554442
CBD71050P01: RNCC: 3 | RNVC: 2

25 Mar 2002

5340-15-154-9276
Sector A/O

151549276
CBD70784P05: RNCC: 3 | RNVC: 2

12 Nov 2001

5340-15-155-4450
Half Ring A/O

151554450
CBD71182P01: RNCC: 3 | RNVC: 2

25 Mar 2002

5340-15-156-3608
Upper A Support A/O

151563608
(241)A3460CBD71402P03: RNCC: 3 | RNVC: 2
CBD71402P03: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-152-4738
Screech Damper A/O

151524738
NN78766G01: RNCC: 3 | RNVC: 2

18 Sep 2000

5340-15-155-4912
Support A/O

151554912
CBD71127P01: RNCC: 3 | RNVC: 2

28 Mar 2002

5340-15-155-4965
Stopper A/O

151554965
CBD70791P10: RNCC: 3 | RNVC: 2

28 Mar 2002

5340-15-155-4927
Hook A/O

151554927
CBD70790P05: RNCC: 3 | RNVC: 2

28 Mar 2002

5340-15-152-0514
Hddu R/F Bracket

151520514
8854 125-171: RNCC: 3 | RNVC: 2

3 Aug 2000

5340-15-156-1999
Suppo Accessory A/O

151561999
CBD71066P07: RNCC: 3 | RNVC: 2
(241)A3460CBD71066P07: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-121-6321
Coupelle S/Arbre

151216321
800035930: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-119-3463
Cavo Coax Uhf 1/2M

151193463
587331123M: RNCC: 3 | RNVC: 2

11 Feb 2000

5340-15-122-2405
Coupelle S/Te

151222405
80A015396: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-156-2190
Support Plate A/O

151562190
(241)A3460CBD71066P06: RNCC: 3 | RNVC: 2
CBD71066P06: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-217-2128
Fasteners 1/8'

152172128
MM439WNXL2: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-121-6490
Rochet S/Barillet

151216490
800048580: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-155-4984
Support A/O

151554984
CBD70794P01: RNCC: 3 | RNVC: 2

28 Mar 2002

5340-15-155-4577
Rear Acce Cover A/O

151554577
CBD71289P01: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-15-155-4987
Hook A/O

151554987
CBD70795P01: RNCC: 3 | RNVC: 2

28 Mar 2002

5340-15-155-4936
Holding Base A/O

151554936
CBD71130G01: RNCC: 3 | RNVC: 2

28 Mar 2002

5340-15-214-9752
Tassello 10/110

152149752
TASSELLO10/110: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-186-1887
Ghiera 3/8"

151861887
S-14-927084603: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-152-0537
Hddu L/F Bracket

151520537
8854 124-161: RNCC: 3 | RNVC: 2

3 Aug 2000

5340-15-156-3464
Oil Scava Cover A/O

151563464
(241)A3460NN74208G01: RNCC: 3 | RNVC: 2
NN74208G01: RNCC: 3 | RNVC: 2

30 Jan 2003

5340-15-115-1567
Pole Base L/H

151151567
121271: RNCC: 3 | RNVC: 2
121271 FIG 1-2: RNCC: 5 | RNVC: 2

29 Nov 1992

5340-15-186-3013
Serratura Fascia S/

151863013
16366180: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-151-1631
Tcu/Hddu L Bracket

151511631
8854 130-211: RNCC: 3 | RNVC: 2
8854130-211: RNCC: 3 | RNVC: 2

12 Apr 2000

5340-15-155-4976
Lifting/Turning A/O

151554976
CBD70791P01: RNCC: 3 | RNVC: 2

28 Mar 2002

5340-15-156-2145
Support A/O

151562145
(241)A3460CBD70761P30: RNCC: 3 | RNVC: 2
CBD70761P30: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-166-5164
Lucchetto Logo N/ 6

151665164
L0G0N60: RNCC: 3 | RNVC: 2
L0G0N60: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-145-0960
Anodo/Catodo Assiem

151450960
4G-A/C/I/50/0: RNCC: 3 | RNVC: 2
4G50/S/GEN/0: RNCC: 3 | RNVC: 2

17 Jun 1997

5340-15-156-3372
Wrapping Handle A/O

151563372
(241)A3460CBD71233P02: RNCC: 3 | RNVC: 2
CBD71233P02: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-15-186-3122
Porta Gom.3/4

151863122
H0523S68: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-155-4633
Support Plate A/O

151554633
CBD71280P02: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-15-217-3254
Tassello 6X30 C/Vit

152173254
TASSELLOMM6: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-156-3609
Lower A Support A/O

151563609
CBD71402P02: RNCC: 3 | RNVC: 2
(241)A3460CBD71402P02: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-159-9261
Tappo 3/4' E Anodo

151599261
130506051: RNCC: 3 | RNVC: 2
(241)A5103130506051: RNCC: 5 | RNVC: 2

14 Apr 2004

5340-15-122-9430
Boot (S/N 30850 Thr

151229430
205-030-196-029: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-156-2143
Support A/O

151562143
CBD71069P01: RNCC: 3 | RNVC: 2
(241)A3460CBD71069P01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-154-9316
Protecti Cover A/O

151549316
CBD71016G01: RNCC: 3 | RNVC: 2
CBD71016P01: RNCC: 3 | RNVC: 2

13 Nov 2001

5340-15-166-5089
Cap-Port S/A

151665089
41716: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-207-2895
Cono In Grafite/Ves

152072895
09920104: RNCC: 3 | RNVC: 2
(241)A394409920104: RNCC: 5 | RNVC: 2

1 Oct 2012

5340-15-217-2134
Fasteners 5/32'

152172134
MM439WNX3: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-152-0538
Hddu R/F Bracket

151520538
8854 124-171: RNCC: 3 | RNVC: 2

3 Aug 2000

5340-15-217-2127
Fasteners 3/16'

152172127
MM439WNXL4: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-166-4961
1/4' Dia (Bls 4 Pin

151664961
P27807: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-155-4608
Control P Plate A/O

151554608
CBD71283P02: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-15-156-2144
Support A/O

151562144
(241)A3460CBD70761P16: RNCC: 3 | RNVC: 2
CBD70761P16: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-219-2906
Sbobinatore P/6 Bob

152192906
339.6: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-219-5430
Catena C/Tiranti

152195430
CATENA-C/TIRANTI: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-156-2059
Flange A/O

151562059
(241)A3460CBD71208P01: RNCC: 3 | RNVC: 2
CBD71208P01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-156-2066
Handles A/O

151562066
(241)A3460CBD71066P02: RNCC: 3 | RNVC: 2
CBD71066P02: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-214-9751
Tassello 12/120

152149751
TASSELLO 12/120: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-174-7493
Lamiera 2 Piaimg3/3

151747493
54420-05/023: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-170-8752
Rod 3/4' Eccosorb M

151708752
68781-03/001: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-176-3056
Lucchetto 3243/9X75

151763056
32439075: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-151-1632
Bracket Rsi/Hddu R/

151511632
8854 130-221: RNCC: 3 | RNVC: 2
8854130-221: RNCC: 3 | RNVC: 2

12 Apr 2000

5340-15-182-6869
Tassello Mm10x50 C/

151826869
10X50: RNCC: 3 | RNVC: 2
565392: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-155-4959
Half Left Ring A/O

151554959
CBD70789P01: RNCC: 3 | RNVC: 2

28 Mar 2002

5340-15-122-2780
Prise D Air S/Filtr

151222780
800053221: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-155-4570
Cover A/O

151554570
CBD71290P02: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-15-156-3366
Base A/O

151563366
(241)A3460CBD71231P02: RNCC: 3 | RNVC: 2
CBD71231P02: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-15-155-4931
Support A/O

151554931
CBD70790P03: RNCC: 3 | RNVC: 2

28 Mar 2002

5340-15-179-7006
Capping/Frame

151797006
0000500414587: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-156-3647
Absorbe Support A/O

151563647
(241)A3460CBD71408P02: RNCC: 3 | RNVC: 2
CBD71408P02: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-182-6866
Tassello Mm8x40 C/V

151826866
565391: RNCC: 3 | RNVC: 2
8X40: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-195-2558
Tasselli 5Mm C/Vite

151952558
TASSELLI5MM: RNCC: 3 | RNVC: 2
(241)AD782TASSELLI5MM: RNCC: 5 | RNVC: 2

9 Mar 2011

5340-15-156-3375
Base A/O

151563375
(241)A3460CBD71234P01: RNCC: 3 | RNVC: 2
CBD71234P01: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-15-122-2157
Molette S/Vis

151222157
800057413: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-217-2133
Fasteners 1/8'

152172133
MM439WNX2: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-121-6352
Segment S/Plongeur

151216352
800037989: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-155-4951
Tube A/O

151554951
CBD71131P05: RNCC: 3 | RNVC: 2

28 Mar 2002

5340-15-155-4858
Blad Protection A/O

151554858
CBD71187P01: RNCC: 3 | RNVC: 2

27 Mar 2002

5340-15-215-0478
Fisher 8/10

152150478
45138: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-152-0554
Aiu/Cp Bracket

151520554
8854 124-211: RNCC: 3 | RNVC: 2

3 Aug 2000

5340-15-189-9188
Collare 1/2

151899188
COLLARI1/2: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-212-1033
Grillo Da 3/8'

152121033
14-965011004: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-155-4960
Half Right Ring A/O

151554960
CBD70789P02: RNCC: 3 | RNVC: 2

28 Mar 2002

5340-15-121-6559
Tampon S/Reservoir

151216559
800051243: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-215-0479
Fisher 10/15

152150479
45142: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-156-3920
Bracket A/O

151563920
(241)A3460CBD70798P04: RNCC: 3 | RNVC: 2
CBD70798P04: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-217-2130
Fasteners 5/32'

152172130
MM439WNXL3: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-211-1688
Maniglia C/Placca Y

152111688
47000820: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-156-3596
Visual Ins Port A/O

151563596
(241)A3460CBD71410P02: RNCC: 3 | RNVC: 2
CBD71410P02: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-166-4884
Lucchetto Da M/M 40

151664884
LUCCHETT0VIR0MM40: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-155-4403
Immobilizer A/O

151554403
CBD71044G01: RNCC: 3 | RNVC: 2

25 Mar 2002

5340-15-186-3121
Maschio P/Tubi Bsp

151863121
M371NI1: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-155-4950
Tube A/O

151554950
CBD71131P04: RNCC: 3 | RNVC: 2

28 Mar 2002

5340-15-182-4345
Serratura Welka S/C

151824345
13070010: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-161-9254
Fascetta/Collare Pe

151619254
8197970: RNCC: 3 | RNVC: 2

1 Oct 2000

5340-15-155-4908
Guide Bullet A/O

151554908
CBD71125P01: RNCC: 3 | RNVC: 2

28 Mar 2002

5340-15-155-4262
A/O Stay-Bolt

151554262
UNI6055 M5X40: RNCC: 3 | RNVC: 2

25 Mar 2002

5340-15-122-2542
Frein/ Crabot Kick

151222542
800020474: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-121-6636
Protection S/Clapet

151216636
800056353: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-154-9268
Support A/O

151549268
CBD70784P01: RNCC: 3 | RNVC: 2

12 Nov 2001

5340-15-179-6969
Channel/Boxing

151796969
0000500404590: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-217-2135
Fasteners 1/4'

152172135
MM430M6: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-156-3237
Screech Damper A/O

151563237
(241)A3460NN78839G03: RNCC: 3 | RNVC: 2
NN78839G03: RNCC: 3 | RNVC: 2

27 Jan 2003

5340-15-185-0925
Collare Tubo/Pvc 25

151850925
CF25G: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-213-8883
Catenaccio Libero/O

152138883
037IBFM: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-195-0160
Blad Protection A/O

151950160
CBD71187P02: RNCC: 3 | RNVC: 2
(241)A3460CBD71187P02: RNCC: 5 | RNVC: 2

16 Feb 2011

5340-15-154-9213
Support A/O

151549213
CBD70754P01: RNCC: 3 | RNVC: 2

12 Nov 2001

5340-15-156-2017
Lower Base A/O

151562017
CBD71163P01: RNCC: 3 | RNVC: 2
(241)A3460CBD71163P01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-155-4571
Central A Cover A/O

151554571
CBD71290P01: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-15-156-3675
Upper A Support A/O

151563675
(241)A3460CBD71405P03: RNCC: 3 | RNVC: 2
CBD71405P03: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-213-4656
Serratura C/Cilindr

152134656
97058: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-156-2049
Suppor F.C.O.C. A/O

151562049
(241)A3460CBD71066P08: RNCC: 3 | RNVC: 2
CBD71066P08: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-122-2146
Coude S/Couvercle

151222146
800051989: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-156-2048
Crossbar A/O

151562048
(241)A3460CBD71066P03: RNCC: 3 | RNVC: 2
CBD71066P03: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-156-3606
Lateral Support A/O

151563606
(241)A3460CBD71402P06: RNCC: 3 | RNVC: 2
CBD71402P06: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-215-6326
Trave Ipe Mm/200

152156326
FTRIPE200M: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-156-2060
Flange A/O

151562060
(241)A3460CBD71198P01: RNCC: 3 | RNVC: 2
CBD71198P01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-219-8154
Bobina Teflon 1/2 1

152198154
1/2 12 MT: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-156-3292
Blank A/O Panel

151563292
(241)A3460CBN71295P04: RNCC: 3 | RNVC: 2
CBN71295P04: RNCC: 3 | RNVC: 2

28 Jan 2003

5340-15-156-3928
Support A/O

151563928
CBD71356P01: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-155-4924
Sx Base A/O

151554924
CBD70790P02: RNCC: 3 | RNVC: 2

28 Mar 2002

5340-15-156-3293
Wheel Frame A/O

151563293
(241)A3460CBN71295P05: RNCC: 3 | RNVC: 2
CBN71295P05: RNCC: 3 | RNVC: 2

28 Jan 2003

5340-15-203-8850
Cuscinetto C/Piastr

152038850
CUSCINETTO: RNCC: 3 | RNVC: 2
(241)AD445CUSCINETTO: RNCC: 5 | RNVC: 2

13 Jul 2011

5340-15-156-2063
Frame Support A/O

151562063
(241)A3460CBD70761P01: RNCC: 3 | RNVC: 2
CBD70761P01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-154-9314
Protecti Cover A/O

151549314
CBD71014G01: RNCC: 3 | RNVC: 2

13 Nov 2001

5340-15-156-7970
Tensioning Tie Rod

151567970
11GJ04343024S01-439: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-15-199-9472
Staffa Per Telecame

151999472
88.0040: RNCC: 3 | RNVC: 2
(241)A550788.0040: RNCC: 5 | RNVC: 2
SP/TC: RNCC: 5 | RNVC: 2

28 Jul 2005

5340-15-007-7866
Ammortizzatore

150077866
741026: RNCC: 3 | RNVC: 2

10 May 1980

5340-15-068-2254
Anello Speciale

150682254
476711: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-15-170-4233
Left Bracket

151704233
60133160: RNCC: 3 | RNVC: 2

16 Jan 2003

5340-15-177-4756
Kit Dime Calibrate

151774756
20EK008: RNCC: 3 | RNVC: 2
(241)A166720EK008: RNCC: 5 | RNVC: 2

24 Mar 2004

5340-15-136-9073
Heli Coil

151369073
STD1173: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-074-4310
Turnbuckle

150744310
1B27UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-181-1806
Plate

151811806
3087001: RNCC: 3 | RNVC: 2

10 Nov 2008

5340-15-232-9010
Gancio Per Pannello

152329010
0391: RNCC: 3 | RNVC: 2
534015E120458: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-177-3378
Utility Resilient Mount

151773378
4565875: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-002-9702
Sealing Plug Assembly

150029702
42559560: RNCC: 3 | RNVC: 2
(241)A424942559560: RNCC: 5 | RNVC: 2

22 Oct 2013

5340-15-001-8141
Dust And Moisture Seal Protective Cover

150018141
98180525: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-178-5222
Dust And Moisture Seal Protective Plug

151785222
69M0009: RNCC: 3 | RNVC: 2
5010334231: RNCC: 5 | RNVC: 2

1 Jul 2005

5340-15-187-8858
Pulley Guard

151878858
688 41: RNCC: 3 | RNVC: 2

19 May 2009

5340-15-156-5208
Manual Control Lever

151565208
21200077-22: RNCC: 3 | RNVC: 2

21 Feb 2003

5340-15-074-4392
Turnbuckle

150744392
1A8UNI2021ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-166-4975
Switch

151664975
1493N15: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-231-1129
Lucchetto Mm.30

152311129
22010/30: RNCC: 3 | RNVC: 2
534015E015383: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-155-4449
Rod Tie

151554449
CBD71182P03: RNCC: 3 | RNVC: 2

25 Mar 2002

5340-15-192-0111
Filtro

151920111
015567S7-12D: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-212-4320
Palo Zincato Da 70M

152124320
PALO70Z: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-155-4568
Frame Assy

151554568
CBD71280G01: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-15-106-1556
Testa Tirante Filet

151061556
23550: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-100-1876
Antivibrante Comple

151001876
M100: RNCC: 3 | RNVC: 2

21 Jan 1986

5340-15-103-6606
Staffa Fissaggio As

151036606
24009144A: RNCC: 3 | RNVC: 2

26 Nov 1987

5340-15-051-3587
Coprispigolo

150513587
4507071: RNCC: 3 | RNVC: 2
4507071: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-119-7429
Prote Cover

151197429
01TC20890: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-137-1045
Piastrina

151371045
69840: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-166-5179
Fascetta 40X60

151665179
261040060: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-003-3467
Manual Control Lever

150033467
182724335: RNCC: 3 | RNVC: 2
(241)A0199182724335: RNCC: 5 | RNVC: 2

4 Nov 2013

5340-15-126-7424
Handwheel

151267424
232282: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-112-2920
Tappo Speciale

151122920
200A0003-403: RNCC: 3 | RNVC: 2

10 Apr 1991

5340-15-147-5792
T-Fitting

151475792
98RS946: RNCC: 3 | RNVC: 2

30 Dec 1997

5340-15-065-8277
Piastra Per Collega

150658277
1809: RNCC: 3 | RNVC: 2

4 Sep 1985

5340-15-179-4372
Helical Compression Spring Seat

151794372
46200276: RNCC: 3 | RNVC: 2

28 Nov 2006

5340-15-138-5054
Cerniera Portiera

151385054
7074460: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-212-3117
Gancio Per Molle

152123117
5197: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-177-4752
Padlock

151774752
20EW005: RNCC: 3 | RNVC: 2
(241)A166720EW005: RNCC: 5 | RNVC: 2

24 Mar 2004

5340-15-156-2124
Plug

151562124
(241)A3460CBD71271P03: RNCC: 3 | RNVC: 2
CBD71271P03: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-117-0591
Coin De Lame Droit

151170591
70646380: RNCC: 3 | RNVC: 2
(241)AE19270646380: RNCC: 5 | RNVC: 2
70646380: RNCC: 5 | RNVC: 2

28 Jul 1993

5340-15-109-0123
Turnbuckle

151090123
1365097: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-104-8919
Fissaggio Gaffetta

151048919
4555171: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-170-3231
Nut And Bolt Locking Plate

151703231
D0478851: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-020-1886
Nut And Bolt Locking Plate

150201886
01-231L27: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-109-1919
Mensolasostegno

151091919
60100369: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-122-2311
Anchor Strap

151222311
8AA066460: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-147-3066
Plate

151473066
300473: RNCC: 3 | RNVC: 2

31 Oct 1997

5340-15-202-3656
Staffetta Fissaggio

152023656
17310201: RNCC: 3 | RNVC: 2
(241)A424917310201: RNCC: 5 | RNVC: 2

28 Feb 2007

5340-15-119-0177
Anchor Strap

151190177
70653763: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-007-1969
Nut And Bolt Locking Plate

150071969
1384910: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-121-9055
Collare Speciale Co

151219055
142502072: RNCC: 3 | RNVC: 2

19 Mar 1996

5340-15-176-2737
Miniseghetto

151762737
017250030: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-117-9582
Nonrotating Shaft Eye Bracket

151179582
78961F02: RNCC: 3 | RNVC: 2
78961F02: RNCC: 3 | RNVC: 2
78961F02: RNCC: 5 | RNVC: 9

8 Sep 2000

5340-15-000-2040
Sealing Plug Assembly

150002040
ACCP204: RNCC: 3 | RNVC: 2

8 Feb 2013

5340-15-008-7154
Rubber Bumper

150087154
SISTEMAGI.ART.281: RNCC: 3 | RNVC: 2

21 Mar 1982

5340-15-100-0827
Clamp Band

151000827
75505F91: RNCC: 3 | RNVC: 2
75505F91: RNCC: 5 | RNVC: 2

23 Mar 1987

5340-15-156-3356
Trasportatore

151563356
(241)A3460CBD71221P01: RNCC: 3 | RNVC: 2
CBD71221P01: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-15-116-8589
Cilindro Fondello

151168589
D0469540: RNCC: 3 | RNVC: 2

8 Apr 1994

5340-15-215-1379
Ruota Fissa

152151379
EX5340RI5201288: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-123-6678
Snodo In Durall

151236678
2GMVDIS15-92: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-163-1544
Clip

151631544
1309582080: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-002-5965
Angle Bracket

150025965
5801377365: RNCC: 3 | RNVC: 2

4 Sep 2013

5340-15-139-8073
Turnbuckle

151398073
1001962: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-199-4950
Nut And Bolt Locking Plate

151994950
70353F01: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-15-154-1454
Staffa

151541454
00115147: RNCC: 3 | RNVC: 2
0-115147: RNCC: 3 | RNVC: 2
1PA39630-115147: RNCC: 5 | RNVC: 2
(241)A39630-115147: RNCC: 5 | RNVC: 2

22 Mar 2001

5340-15-151-9623
Staffa

151519623
0-173624: RNCC: 3 | RNVC: 2
00173624: RNCC: 3 | RNVC: 2
(241)A39630-173624: RNCC: 5 | RNVC: 2

27 Jul 2000

5340-15-151-9404
Staffa

151519404
00173971: RNCC: 3 | RNVC: 2
0-173971: RNCC: 3 | RNVC: 2
(241)A39630-173971: RNCC: 5 | RNVC: 2

26 Jul 2000

5340-15-009-2239
Dust And Moisture Seal Protective Plug

150092239
961-702-050-4: RNCC: 3 | RNVC: 2
9932396: RNCC: 5 | RNVC: 2
9617020504: RNCC: 5 | RNVC: 2
9932392: RNCC: 5 | RNVC: 2

22 Sep 1981

5340-15-100-1025
Supporto

151001025
P-852597-001: RNCC: 3 | RNVC: 2
P852597-001: RNCC: 5 | RNVC: 2

10 Sep 1986

5340-15-049-6526
Forcella

150496526
4-8351-301-41893-1: RNCC: 3 | RNVC: 2
4-8351-3-01-41893-1: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-109-9576
Piastrina Di Colleg

151099576
11732-101A00: RNCC: 3 | RNVC: 2
11732-101: RNCC: 5 | RNVC: 2

14 Mar 1990

5340-15-045-1486
Control Rod

150451486
500-12-16: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-113-6824
Piastrinaspeciale

151136824
308-5100-00: RNCC: 3 | RNVC: 2

4 Feb 1992

5340-15-202-3012
Switch Safety Cover

152023012
999-8001-70-101: RNCC: 3 | RNVC: 2
(241)A0126999-8001-70-101: RNCC: 5 | RNVC: 2

20 Feb 2007

5340-15-134-3453
Fascetta

151343453
11-101-78: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-115-8701
Rod

151158701
273664P1: RNCC: 3 | RNVC: 2
71-02-023-019: RNCC: 3 | RNVC: 2

1 Feb 1993

5340-15-148-7489
Assieme Tappo

151487489
2104-0015-001: RNCC: 3 | RNVC: 2

30 Sep 1998

5340-15-115-3471
Plate

151153471
710-6275-070: RNCC: 3 | RNVC: 2
82-01694: RNCC: 5 | RNVC: 2

29 Nov 1992

5340-15-102-6996
Helical Compression Spring Seat

151026996
421453: RNCC: 3 | RNVC: 2

10 Aug 1987

5340-15-005-0467
Resilient Mount

150050467
0-20149: RNCC: 3 | RNVC: 2

7 Sep 1978

5340-15-007-7079
Helical Compression Spring Retainer

150077079
4556906: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-153-7428
Headless Straight Rod

151537428
142061440: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-175-8297
Elettroriduttore Re

151758297
JOLLY22: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-002-6322
Spring Loaded Cylinder Fastener

150026322
182741396: RNCC: 3 | RNVC: 2

11 Sep 2013

5340-15-068-3667
Helical Compression Spring Seat

150683667
OD143Z098: RNCC: 3 | RNVC: 2

27 Oct 1985

5340-15-007-9420
Helical Compression Spring Seat

150079420
4578175: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-121-5752
Engine Accessory Bracket

151215752
1Q 609016LA: RNCC: 3 | RNVC: 2
1Q 609016LA: RNCC: 5 | RNVC: 9

18 Sep 1996

5340-15-178-1673
Electronic Equipment Hardware Kit

151781673
PRGA0012PE: RNCC: 3 | RNVC: 2
3512 110 47538: RNCC: 5 | RNVC: 2

11 Mar 2005

5340-15-103-0985
Extension Drawer Slide Section

151030985
DE013.12.761: RNCC: 3 | RNVC: 2
(241)A5015DE013.12.761: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-115-3479
Resilient Mount

151153479
12SAB133-15: RNCC: 3 | RNVC: 2

13 Jun 1996

5340-15-207-4629
Spacing Threaded Standoff

152074629
898MC0139: RNCC: 3 | RNVC: 2
(241)A0199898MC0139: RNCC: 5 | RNVC: 2

12 Oct 2012

5340-15-145-0967
Dust And Moisture Seal Protective Plug

151450967
11232001A: RNCC: 3 | RNVC: 2

28 Apr 1997

5340-15-199-5021
Engine Accessory Bracket

151995021
1Q 606590: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-15-105-8501
Double Angle Bracket

151058501
4517288: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-206-5440
Anello Di Flussaggi

152065440
6540968: RNCC: 3 | RNVC: 2
(241)S58966540968: RNCC: 5 | RNVC: 2

25 Jun 2012

5340-15-177-5577
Electronic Equipment Hardware Kit

151775577
570.710.023N: RNCC: 3 | RNVC: 2

8 May 2004

5340-15-009-7783
Helical Compression Spring Seat

150097783
9931511: RNCC: 3 | RNVC: 2
975.300.151.4: RNCC: 3 | RNVC: 2
9753001514: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-188-9768
Screw Thread Insert And Tool Assortment

151889768
MR3268BIT36: RNCC: 3 | RNVC: 2
(241)AG622MR3268BIT36: RNCC: 5 | RNVC: 2

12 Jan 2010

5340-15-193-1597
Angle Bracket

151931597
504155063: RNCC: 3 | RNVC: 2
(241)A4249504155063: RNCC: 5 | RNVC: 2

20 Apr 2010

5340-15-193-3394
Multiple Angle Bracket

151933394
13100: RNCC: 3 | RNVC: 2

6 May 2010

5340-15-112-1375
Staffaperc

151121375
DE013.14.375: RNCC: 3 | RNVC: 2

12 Feb 1991

5340-15-002-2761
Bumper

150022761
504381439: RNCC: 3 | RNVC: 2

2 Aug 2013

5340-15-205-2511
Universal Adjustable Chock

152052511
504377090: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-111-8630
Semifascetta

151118630
21610732A: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-103-0743
Dust And Moisture Seal Protective Plug

151030743
DE013.13.494: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-001-3487
Helical Compression Spring Seat

150013487
504127797: RNCC: 3 | RNVC: 2

17 Jun 2013

5340-15-102-8717
Helical Compression Spring Seat

151028717
1P268691: RNCC: 3 | RNVC: 2
1P268691: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-112-9758
Helical Compression Spring Seat

151129758
70343043: RNCC: 3 | RNVC: 2

8 Mar 1991

5340-15-121-7033

5340-15-207-0808

5340-15-154-7340
Piattello In Acciai

151547340
C68789: RNCC: 3 | RNVC: 2

13 Sep 2001

5340-15-178-1980
Fermacavo

151781980
69F007P012: RNCC: 3 | RNVC: 2

11 Mar 2005

5340-15-176-2132
Nottolino

151762132
0751.25: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-206-9937
Lucchetto A Chiave

152069937
120383: RNCC: 3 | RNVC: 2
(241)A3593120383: RNCC: 5 | RNVC: 2

6 Aug 2012

5340-15-148-3531
Double Angle Bracket

151483531
151690: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-001-3398
Angle Bracket

150013398
504382130: RNCC: 3 | RNVC: 2

17 Jun 2013

5340-15-121-8583
Mechanic Equipment Hardware Kit

151218583
EF246AAK: RNCC: 3 | RNVC: 2

12 Mar 1996

5340-15-181-4445
Piastra Ammortizzat

151814445
414: RNCC: 3 | RNVC: 2
PRT414: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-138-3091
Tassello

151383091
14219490: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-138-6605
Staffa

151386605
3077: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-145-1880
Barre Ancrage

151451880
80A052231: RNCC: 3 | RNVC: 2
F300 0T 019 9655: RNCC: 6 | RNVC: 9

2 Jun 1997

5340-15-138-2875
Bocchetta Laterale

151382875
07072-10: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-157-6280
Resilient Mount

151576280
05500019: RNCC: 3 | RNVC: 2
(241)A977205500019: RNCC: 5 | RNVC: 2

9 Oct 2003

5340-15-137-3169
Cerniera

151373169
S6121-62757-3: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-127-6823
Molla Valvola

151276823
4029003: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-115-2974
Bridge

151152974
113711109: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-151-6964
Piastra

151516964
0-179544: RNCC: 3 | RNVC: 2

30 Jun 2000

5340-15-215-9306
Testina Quadra

152159306
IMBAC: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-137-5852
Tappo Gomma Pofilat

151375852
137668: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-143-3028
Tappo Irf

151433028
009-269196: RNCC: 3 | RNVC: 2
691014: RNCC: 3 | RNVC: 2

11 Dec 1996

5340-15-122-1952
Control Rod Extension

151221952
28009-79: RNCC: 3 | RNVC: 2
28009-79: RNCC: 5 | RNVC: 9

25 Jun 1996

5340-15-122-9243
Fascetta

151229243
MS21919WCH5: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-066-7591
Gruppo Ghiera

150667591
371379: RNCC: 2 | RNVC: 2
D0371379: RNCC: 3 | RNVC: 2

1 Apr 1998

5340-15-115-7044
Coperchietto

151157044
D0469588: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-231-5712
Viteria E Bulloneri

152315712
534015E138164: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-062-5368
Anchor Strap

150625368
074029 X: RNCC: 3 | RNVC: 2

1 May 1977

5340-15-215-4066
Morsetto Mm.3 Per P

152154066
MORSETTOMM3: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-159-4733
Padlock

151594733
PN UAS 00027730: RNCC: 3 | RNVC: 2
5340F76026491: RNCC: 5 | RNVC: 9

31 Mar 2004

5340-15-206-4222
Leve

152064222
BUK-B: RNCC: 3 | RNVC: 2
(241)A2946BUK-B: RNCC: 5 | RNVC: 2

7 Jun 2012

5340-15-179-7227
Dust And Moisture Seal Protective Plug

151797227
42533567: RNCC: 3 | RNVC: 2
(241)A424942533567: RNCC: 5 | RNVC: 2

7 Jun 2007

5340-15-001-7964
Manual Control Lever

150017964
500407087: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-158-6174
Speciale Occhiello

151586174
122515163: RNCC: 3 | RNVC: 2

10 Mar 2004

5340-15-007-9983
Helical Compression Spring Seat

150079983
768185: RNCC: 3 | RNVC: 2
768185: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-207-0191
Dust And Moisture Seal Protective Plug

152070191
RF70CM1815D: RNCC: 3 | RNVC: 2
(241)A3004RF70CM1815D: RNCC: 5 | RNVC: 2

8 Aug 2012

5340-15-102-8862
Accesso Coperchio

151028862
1R308000: RNCC: 3 | RNVC: 2
1R308000: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-119-8177
Coperchio Testa Cil

151198177
D0469726: RNCC: 3 | RNVC: 2
469726: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-065-9835
Supporto Elastico

150659835
14009012A: RNCC: 3 | RNVC: 2

21 May 1985

5340-15-189-8148
Fascetta Serracavo

151898148
1808394: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-184-9565
Minuteria Metallica

151849565
NSN534015R691223: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-217-0794
Ferma Moquette

152170794
FERMAMOQUETTE: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-074-4131
Turnbuckle

150744131
2C52UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-213-8453
Cerniera Flash Base

152138453
GS012300: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-108-8005
Resilient Mount

151088005
1357131: RNCC: 3 | RNVC: 2
90390026600: RNCC: 5 | RNVC: 2

20 Apr 1988

5340-15-213-8624
Elettroserratura Da

152138624
14461-70: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-067-2629
Fascetta

150672629
C404: RNCC: 2 | RNVC: 2

1 Apr 1998

5340-15-177-0203
Spacer

151770203
50019348: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-105-6362
Collare Serraggio

151056362
9909836: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-163-8835
Control Rod

151638835
8583269: RNCC: 3 | RNVC: 2
8583269: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-127-2666
Anello

151272666
2200-24875: RNCC: 3 | RNVC: 2
2200-24875: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-051-9225
Chiave Per Serratur

150519225
DISNP17TIP0HSINISTRA: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-060-8913
Helical Compression Spring Retainer

150608913
H50D38: RNCC: 5 | RNVC: 2
H50D38: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-119-7712
Nonmetallic Bumper

151197712
943949: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-196-6295
Padlock

151966295
PN UAS 00041945: RNCC: 3 | RNVC: 2
5340F76036145: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-003-9024
Nut And Bolt Locking Plate

150039024
182707654: RNCC: 3 | RNVC: 2
(241)A0199182707654: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-181-4430
Mensola Lunga

151814430
ASS407: RNCC: 3 | RNVC: 2
407: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-119-7801
Fl Mounting Plate

151197801
241809012N: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-231-6333
Leva

152316333
0-122253: RNCC: 3 | RNVC: 2
534015E103927: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-121-5730
Control Rod

151215730
1P 531749LA: RNCC: 3 | RNVC: 2
1P 531749LA: RNCC: 5 | RNVC: 9

18 Sep 1996

5340-15-148-6478
Access Cover

151486478
190516268: RNCC: 3 | RNVC: 2

17 Sep 1998

5340-15-144-9980
Special Stud Fixed

151449980
740659: RNCC: 3 | RNVC: 2

26 Feb 1997

5340-15-105-6002
Staffa A Gomito

151056002
4639742: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-153-7657
Base (1) Per Sosteg

151537657
01800A102390: RNCC: 5 | RNVC: 2
01800A102390: RNCC: 5 | RNVC: 9

27 Feb 2001

5340-15-007-2146
Turnbuckle

150072146
1383435: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-232-3711
Kit Supporti

152323711
TD172RA: RNCC: 3 | RNVC: 2
534015E097439: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-007-9603
Cover Plate Access

150079603
4426086: RNCC: 3 | RNVC: 2
4426086: RNCC: 5 | RNVC: 9

22 Sep 1979

5340-15-155-2978
Resilient Mount

151552978
60183687: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-15-109-9013
Supporto Laterale

151099013
468809: RNCC: 3 | RNVC: 2
D0468809: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-112-8378
Rallaantif

151128378
466792: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-153-5983
Base (1) Per Sosteg

151535983
142018193: RNCC: 3 | RNVC: 2

16 Feb 2001

5340-15-178-6864
Blank Panel

151786864
A156429-1: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-115-6934
Handwheel

151156934
D0468664: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-197-8671
Attacco

151978671
N523G5293201: RNCC: 3 | RNVC: 2

21 May 2004

5340-15-196-6306
Padlock

151966306
PN UAS 00049149: RNCC: 3 | RNVC: 2
5340F76039872: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-153-0125
Protezione Per Ammo

151530125
76942F92: RNCC: 3 | RNVC: 2

14 Nov 2000

5340-15-112-2657
Metal Runner

151122657
773139: RNCC: 3 | RNVC: 2

30 Apr 1988

5340-15-007-2753
Supporto

150072753
1387740: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-181-0122
Loop Clamp Kit

151810122
8090B: RNCC: 3 | RNVC: 2
(241)AF2678090B: RNCC: 5 | RNVC: 2

22 Sep 2008

5340-15-235-6223
Quadro Gancio

152356223
82: RNCC: 3 | RNVC: 2
534015E081011: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-159-9743
Rubber Bumper

151599743
122607468: RNCC: 3 | RNVC: 2

19 Apr 2004

5340-15-162-3248
Hose Retainer

151623248
159711: RNCC: 3 | RNVC: 2
47159711: RNCC: 5 | RNVC: 2

27 Jun 2001

5340-15-139-7985
Catenella Completa

151397985
1001715: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-144-6823
Tappo

151446823
96201273: RNCC: 3 | RNVC: 2
5996024: RNCC: 3 | RNVC: 2

11 Dec 1996

5340-15-109-1516
Pomelli Cassetti

151091516
33.5018: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-15-187-5471
Right Side Assy

151875471
G0733.0000: RNCC: 3 | RNVC: 2

9 Apr 2009

5340-15-166-5146
Fascetta Serracavo

151665146
2105602: RNCC: 3 | RNVC: 2
(241)AA1362105602: RNCC: 5 | RNVC: 2

1 Nov 2002

5340-15-159-9740
Rubber Bumper

151599740
122607458: RNCC: 3 | RNVC: 2

19 Apr 2004

5340-15-204-7284
Special Support

152047284
112718280: RNCC: 3 | RNVC: 2

19 Dec 2011

5340-15-179-1414
Tappo Otturatore

151791414
16990770: RNCC: 3 | RNVC: 2
(241)A424916990770: RNCC: 5 | RNVC: 2

13 Jun 2006

5340-15-163-2989
Hebel

151632989
5200.856: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-136-7140
Serratura

151367140
H38K1161: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-237-3153
Gancio

152373153
323169: RNCC: 3 | RNVC: 2
534015E132207: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-179-6762
Double Angle Bracket

151796762
0000500406021: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-154-3539
Helical Compression Spring Seat

151543539
107122040001: RNCC: 3 | RNVC: 2

8 May 2001

5340-15-006-2553
Guida Speciale

150062553
0-33769: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-207-4411
Fastining Surface P

152074411
02451029: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-15-100-8045
Settore

151008045
000900289100: RNCC: 5 | RNVC: 2
000900289100: RNCC: 5 | RNVC: 9

20 Nov 1986

5340-15-127-0841
Molla

151270841
330280: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-116-8475
Control Rod

151168475
D0469514: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-15-206-9672
Collare

152069672
46307463: RNCC: 3 | RNVC: 2
(241)A293046307463: RNCC: 5 | RNVC: 2

2 Aug 2012

5340-15-003-5331
Forcella

150035331
4549715: RNCC: 3 | RNVC: 2
4549715: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-198-1927
Anello

151981927
55.5399/1: RNCC: 3 | RNVC: 2

24 Jun 2004

5340-15-122-5566
Pivot Pin

151225566
01TL21039: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-113-2675
Supporto Filtro

151132675
04.594: RNCC: 3 | RNVC: 2
04.594: RNCC: 3 | RNVC: 2

19 Jun 1991

5340-15-007-2774
Supporto

150072774
1388980: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-051-3286
Rubber Bumper

150513286
860695: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-055-6590
Squadra Attacco

150556590
546062: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-062-9308
Anello Elastico Spe

150629308
0-56573: RNCC: 3 | RNVC: 2

21 Mar 1982

5340-15-179-1872
Snap-In Plain Standoff

151791872
2.3199.219.0: RNCC: 3 | RNVC: 2

13 Jun 2006

5340-15-056-6053
Longherina

150566053
15997: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-181-1085
Clamping Device

151811085
159194-1: RNCC: 3 | RNVC: 2
(241)A0076159194-1: RNCC: 5 | RNVC: 2

27 Oct 2008

5340-15-192-5819
Lucchetto A Stantuf

151925819
06/70: RNCC: 3 | RNVC: 2

26 Mar 2010

5340-15-180-7199
Molla A Gas

151807199
095028: RNCC: 3 | RNVC: 2
(241)A0311095028: RNCC: 5 | RNVC: 2

9 Jul 2008

5340-15-153-7312
Forcella Testa Di T

151537312
142053126: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-106-2595
Terminale A Scatto

151062595
91017: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-166-4748
Molla Per Assieme A

151664748
D13760: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-063-3919
Rigid Surface Mechanical Patch

150633919
1.203.100: RNCC: 3 | RNVC: 2

7 Oct 1982

5340-15-062-2654
Fermo Speciale

150622654
25407.0000: RNCC: 5 | RNVC: 2
4-25407D: RNCC: 5 | RNVC: 2
4-25407D: RNCC: 5 | RNVC: 9
25407.0000: RNCC: 5 | RNVC: 9

30 May 1981

5340-15-007-9518
Rubber Bumper

150079518
4434375: RNCC: 3 | RNVC: 2
4434375: RNCC: 5 | RNVC: 9

22 Sep 1979

5340-15-206-3458
Spring Tension Clip

152063458
504066132: RNCC: 3 | RNVC: 2

4 Jun 2012

5340-15-153-7112
Quick Release Plunger

151537112
1608.16: RNCC: 1 | RNVC: 2
142021279: RNCC: 5 | RNVC: 2

22 Feb 2001

5340-15-001-8809
Anello Centraggio F

150018809
11010390: RNCC: 3 | RNVC: 2

18 Jul 2013

5340-15-112-8539
Saltarello

151128539
471347: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-231-6687
Twist-Lock Sx

152316687
0-122687: RNCC: 3 | RNVC: 2
534015E158158: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-118-0831
Linear Actuating Cylinder Cap

151180831
D0484578: RNCC: 3 | RNVC: 2

16 Dec 1994

5340-15-074-4229
Turnbuckle

150744229
2C22UNI2019AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-121-0980
Escutcheon Plate

151210980
RC3292: RNCC: 3 | RNVC: 2

23 Jan 1996

5340-15-117-0333
Plaquette

151170333
22505: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-112-8305
Pattino

151128305
467141: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-058-4814
Nut And Bolt Locking Plate

150584814
6-176-04604: RNCC: 3 | RNVC: 2
10-33-59-00: RNCC: 5 | RNVC: 2

11 Dec 1976

5340-15-051-3672
Fascetta

150513672
681650: RNCC: 3 | RNVC: 2
681650: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-179-2315
Clamp

151792315
41612028A: RNCC: 3 | RNVC: 2

10 Aug 2006

5340-15-149-3174
Multiple Angle Bracket

151493174
4886352: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-089-0184
Helical Compression Spring Seat

150890184
5051414: RNCC: 3 | RNVC: 2
5051414: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-002-5962
Double Angle Bracket

150025962
5801359836: RNCC: 3 | RNVC: 2

4 Sep 2013

5340-15-113-9920
Control Rod

151139920
D0377460: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-15-154-2025
Fascetta

151542025
0-168284: RNCC: 3 | RNVC: 2
00168284: RNCC: 3 | RNVC: 2
(241)A39630-168284: RNCC: 5 | RNVC: 2
1PA39630-168284: RNCC: 5 | RNVC: 2

28 Mar 2001

5340-15-110-6353
Angle

151106353
P-050577-003: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-109-1230
Rubber Bumper

151091230
60125713: RNCC: 3 | RNVC: 2

30 Apr 1988

5340-15-108-6437
Tassello

151086437
93806171: RNCC: 3 | RNVC: 2
93806171: RNCC: 5 | RNVC: 2
(241)AF90893806171: RNCC: 5 | RNVC: 2
93806171: RNCC: 5 | RNVC: 2

30 Mar 1988

5340-15-121-7962
Shock Mount Pad

151217962
AVAU 705B: RNCC: 3 | RNVC: 2
142520274: RNCC: 5 | RNVC: 2

21 Feb 1996

5340-15-203-0180
Linguetta Di Giunzi

152030180
14-963002069: RNCC: 3 | RNVC: 2

13 Nov 2007

5340-15-112-2664
Helical Compression Spring Seat

151122664
773140: RNCC: 3 | RNVC: 2

30 Apr 1988

5340-15-110-1432
Gancio A Forcella

151101432
23369-101A00: RNCC: 3 | RNVC: 2
23369-101: RNCC: 5 | RNVC: 2
23369-101B00: RNCC: 5 | RNVC: 2

16 Mar 1990

5340-15-206-0109

5340-15-074-4126
Turnbuckle

150744126
2C30UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-105-6351
Collare Serraggio

151056351
10450190: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-157-7258
Turnbuckle

151577258
TENDITORE INOX CRNI UN16900 12MM: RNCC: 3 | RNVC: 2

16 Oct 2003

5340-15-206-2125
Serie Anodi Anticor

152062125
1P 541781: RNCC: 3 | RNVC: 2
(241)A98401P541781: RNCC: 5 | RNVC: 2

28 May 2012

5340-15-156-2046
Build Base Assy

151562046
(241)A3460CBD71251G01: RNCC: 3 | RNVC: 2
CBD71251G01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-231-3736
Tampone

152313736
99991179: RNCC: 3 | RNVC: 2
534015E056592: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-202-4547
Structual Angle

152024547
02459: RNCC: 3 | RNVC: 2
(241)A553602459: RNCC: 5 | RNVC: 2

26 Mar 2007

5340-15-066-1675
Impugnatura Comples

150661675
P-894864-401: RNCC: 3 | RNVC: 2
P894864-401: RNCC: 5 | RNVC: 2

10 Feb 1986

5340-15-180-7482

5340-15-007-0444
Supporto A Fascetta

150070444
92642-001A1: RNCC: 3 | RNVC: 2

13 Feb 1980

5340-15-195-9167
Dust And Moisture Seal Protective Plug

151959167
TPU100: RNCC: 3 | RNVC: 2
(241)A0019TPU100: RNCC: 5 | RNVC: 2

25 May 2011

5340-15-123-5688
Ammortizzatore

151235688
99A544P002: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-145-1032
Tampone

151451032
99991180: RNCC: 3 | RNVC: 2

30 Apr 1997

5340-15-062-5937
Cap Protective

150625937
36E04: RNCC: 3 | RNVC: 2
36E16: RNCC: 3 | RNVC: 2
36E16: RNCC: 3 | RNVC: 2

10 Apr 1982

5340-15-200-3351
Padlock

152003351
0000000130730: RNCC: 3 | RNVC: 2
(241)A39630000000130730: RNCC: 5 | RNVC: 2

12 Dec 2005

5340-15-105-9678
Nottolino

151059678
02-231-E-02-20: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-041-0884
Nottolino

150410884
7-7597-100-23037-1: RNCC: 3 | RNVC: 2
7-7597-1-00-23037-1: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-186-7740
Ante Support Flange

151867740
0000504247353: RNCC: 3 | RNVC: 2
504247353: RNCC: 3 | RNVC: 2

5 Jan 2009

5340-15-006-2522
Ghiera Speciale

150062522
0-08987: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-185-7934
Spazzola Acciaio Mm

151857934
D4010/0: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-160-0899
Lucchetto C.

151600899
F720102461: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-106-0857
Bullone A Mo Staffa

151060857
587507: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-025-0965

5340-15-105-6311
Collare Serraggio

151056311
16883: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-156-3552
Strapping

151563552
GW 52259: RNCC: 3 | RNVC: 2

3 Feb 2003

5340-15-154-1818
Flangia

151541818
130860: RNCC: 3 | RNVC: 2

27 Mar 2001

5340-15-160-0223

5340-15-222-0103
Cilindro Ovale In O

152220103
70222380: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-111-5945
Holder

151115945
A05122-01-24: RNCC: 3 | RNVC: 2
A05122-01-24: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-163-1139
Alloy Rim Pliers

151631139
2306808: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-114-1322
Threaded End Tensioning Tie Rod

151141322
04-0186-034: RNCC: 3 | RNVC: 2

1 Jun 1993

5340-15-205-3050

5340-15-149-9304
Shock Mount Pad

151499304
04617444: RNCC: 3 | RNVC: 2

28 Jun 1999

5340-15-163-0963
Dust And Moisture Seal Protective Plug Set

151630963
A1056-A1: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-106-2030
Comando Impugnatura

151062030
3-120: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-135-9898
Tassello

151359898
9921886: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-130-4883
Seal End Bear

151304883
BRG63: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-115-5463
Braccio Con Manigli

151155463
D0485659: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-103-1037
Blocchetto

151031037
DE069.31.063: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-206-2927
Dust And Moisture Seal Protective Plug

152062927
58021: RNCC: 3 | RNVC: 2
58021: RNCC: 5 | RNVC: 2

1 Jun 2012

5340-15-112-0434
Piastrina Speciale

151120434
275A0215-401: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-127-5637
Anello Elastico Fis

151275637
897557: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-007-2552
Eye Hook

150072552
1383051: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-179-9379
Threaded Union

151799379
16500415: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-115-7050
Coperchio

151157050
D0467809: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-006-4277
Seal Self Locking

150064277
4068865: RNCC: 3 | RNVC: 2
4068865: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-181-4876
Mensola Corta

151814876
ASS425: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-222-2278
Ang. Fissaggio 80X8

152222278
S1-110G: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-122-5525
Trunk Link

151225525
01TL21253: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-127-6572
Staffetta

151276572
383711: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-120-6915
F Supporto Per Vite

151206915
D0470334: RNCC: 3 | RNVC: 2

30 Apr 1996

5340-15-117-7849
Dust And Moisture Seal Protective Cap

151177849
60150575: RNCC: 3 | RNVC: 2

25 Jan 1994

5340-15-188-2800
Dust And Moisture Seal Protective Plug

151882800
SPLT.13002: RNCC: 3 | RNVC: 2
336621183050: RNCC: 5 | RNVC: 2

1 Sep 2009

5340-15-180-9201
Manual Control Handle

151809201
083020207: RNCC: 3 | RNVC: 2
(241)A5009083020207: RNCC: 5 | RNVC: 2

8 Aug 2008

5340-15-009-0917
Resilient Mount

150090917
1141-39-203: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-187-5346
Screw Thread Insert

151875346
61580-25/011: RNCC: 3 | RNVC: 2

9 Apr 2009

5340-15-183-3506
Wire Clip

151833506
FTCRCL-95M: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-111-5943
Guide

151115943
A00470-01-51: RNCC: 3 | RNVC: 2
A00470-01-51: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-156-4333
Handwheel

151564333
74-08208: RNCC: 3 | RNVC: 2

5 Feb 2003

Load More Results