What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 27 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 27 of 72

5340-15-155-0261
Recess Handle

151550261
5041988009000: RNCC: 3 | RNVC: 2
1PA91725041988009000: RNCC: 3 | RNVC: 2

8 Jan 2002

5340-15-194-7810
Lock Key

151947810
59502: RNCC: 3 | RNVC: 2
(241)A348859502: RNCC: 5 | RNVC: 2

14 Jan 2011

5340-15-187-4827
Hose Clamp

151874827
A437A011A: RNCC: 1 | RNVC: 2
BAS247C2-1: RNCC: 3 | RNVC: 2
(241)U1901BAS247C2-1: RNCC: 5 | RNVC: 2

3 Apr 2009

5340-15-178-9403
Mounting Bracket

151789403
MD003MD012AA00: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-15-009-6080
Loop Clamp

150096080
1369610: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-009-1028
Screw Thread Insert

150091028
1040-01-104: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-061-4115
Angle Bracket

150614115
P125087-001: RNCC: 3 | RNVC: 2

19 Jan 1978

5340-15-109-3933
Mending Plate

151093933
5137-308-08: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-178-9301
Mounting Bracket

151789301
FG075MD224AA00: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-15-062-7933
Retaining Strap

150627933
0-34183: RNCC: 3 | RNVC: 2

28 Aug 1982

5340-15-121-8274
Rod End Clevis

151218274
C12116: RNCC: 3 | RNVC: 2

15 Nov 1996

5340-15-151-1146
Mounting Bracket

151511146
380-2084/01: RNCC: 3 | RNVC: 2

21 Mar 2000

5340-15-064-9288
Support Hook

150649288
11019: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-15-003-8971
Mounting Plate

150038971
182741072: RNCC: 3 | RNVC: 2
(241)A0199182741072: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-152-8046
Mounting Bracket

151528046
P473208: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-051-3155
Expansion Plug

150513155
1-43298-01: RNCC: 3 | RNVC: 2
14329801: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-058-4013
Retaining Strap

150584013
553816161000: RNCC: 2 | RNVC: 3
538-16-1610: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-118-4430
Angle Bracket

151184430
60155431: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-103-1359
Mending Plate

151031359
L6300022: RNCC: 3 | RNVC: 2
DE160.03.135: RNCC: 5 | RNVC: 2
(241)A5015DE160.03.135: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-109-4535
Angle Bracket

151094535
1Q 515904: RNCC: 3 | RNVC: 2
1Q 515904: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-231-7130
Handle Grip

152317130
71419181: RNCC: 3 | RNVC: 2
383015E103509: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-004-2848
Clip Retainer Plate

150042848
1-41984-00T10182: RNCC: 3 | RNVC: 2

24 Feb 1978

5340-15-102-1170
Bow Handle

151021170
1040-05-106: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-15-153-4045
Support Hook

151534045
5176-239-02: RNCC: 3 | RNVC: 2

11 Jan 2001

5340-15-063-5957
Loop Clamp

150635957
5939494: RNCC: 3 | RNVC: 2
5939494: RNCC: 5 | RNVC: 9

13 Nov 1982

5340-15-120-3537
Loop Clamp

151203537
17316490: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-197-1770
Rim Lock Set

151971770
PN UAS 00019052: RNCC: 3 | RNVC: 2
5340F76025669: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-111-7981
Handle Grip

151117981
031616/2: RNCC: 3 | RNVC: 2

1 Jul 1990

5340-15-202-8457
Mounting Bracket

152028457
9.3040.0389.A: RNCC: 3 | RNVC: 2
(241)A92169.3040.0389.A: RNCC: 5 | RNVC: 2

23 Jul 2007

5340-15-104-4364
Expansion Plug

151044364
0-49939: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-061-8178
Retaining Strap

150618178
0-102780: RNCC: 3 | RNVC: 2

30 Nov 1982

5340-15-009-2536
Angle Bracket

150092536
P-943727-001: RNCC: 3 | RNVC: 2
P943727-001: RNCC: 5 | RNVC: 2

23 Aug 1980

5340-15-109-1804
Retaining Strap

151091804
1394325: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-005-1077
Mending Plate

150051077
1137-15-120: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-188-9637
Mounting Bracket

151889637
200PL-38: RNCC: 3 | RNVC: 2
91780308: RNCC: 5 | RNVC: 2
351211218091: RNCC: 5 | RNVC: 2

7 Jan 2010

5340-15-179-6487
Angle Bracket

151796487
J53350620-001: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-188-8067
Mounting Bracket

151888067
7984791: RNCC: 3 | RNVC: 2
(241)AD7517984791: RNCC: 5 | RNVC: 2
7984791: RNCC: 5 | RNVC: 2

19 Nov 2009

5340-15-111-8002
Angle Bracket

151118002
031390/3: RNCC: 3 | RNVC: 2

1 Jul 1990

5340-15-186-9005
Plug Button

151869005
049259: RNCC: 3 | RNVC: 2
0028527: RNCC: 5 | RNVC: 2

5 Jan 2009

5340-15-205-2599
Butt Hinge Leaf

152052599
504358615: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-007-1051
Screw Thread Insert

150071051
IS04X80CN7-5: RNCC: 3 | RNVC: 2
ISO4X070CN8: RNCC: 5 | RNVC: 2

24 Nov 1979

5340-15-064-1923
Mending Plate

150641923
W 000545A: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-062-3695
Angle Bracket

150623695
012174 P: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-062-9183
Mending Plate

150629183
0-100338: RNCC: 3 | RNVC: 2

28 Aug 1981

5340-15-103-6698
Roller Holder

151036698
24009331A: RNCC: 3 | RNVC: 2

26 Nov 1987

5340-15-053-0625
Bow Handle

150530625
42M031P001: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-161-0553
Coat And Hat Hook

151610553
F720183361: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-181-0707
Access Cover

151810707
N925G1444201: RNCC: 3 | RNVC: 2

15 Oct 2008

5340-15-107-7728
Retaining Strap

151077728
212-9020-42-1: RNCC: 3 | RNVC: 2

29 Jun 1988

5340-15-207-8247
Swivel Caster

152078247
ALG00N064244: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-205-0985
Hand Crank

152050985
NA1100107AA: RNCC: 3 | RNVC: 2

20 Feb 2012

5340-15-000-4364
Loop Clamp

150004364
425107009012: RNCC: 3 | RNVC: 2

1 Mar 2013

5340-15-118-4583
Loop Clamp

151184583
60153619: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-179-9511
Mounting Bracket

151799511
2458032: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-109-0168
Loop Clamp

151090168
60101974: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-150-1086
Mounting Bracket

151501086
120016019: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-002-1417
Mounting Bracket

150021417
42567074: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-108-5228
Loop Clamp

151085228
4779755: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-189-2663
Plain Solid Disk

151892663
390700390: RNCC: 3 | RNVC: 2
0390700390: RNCC: 5 | RNVC: 2

10 Feb 2010

5340-15-121-0621
Screw Thread Insert

151210621
M10(X1.5)X2D: RNCC: 3 | RNVC: 2
210002569: RNCC: 5 | RNVC: 2

21 Sep 1995

5340-15-007-2531
Angle Bracket

150072531
1374410: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-203-0312
Angle Bracket

152030312
1100012: RNCC: 3 | RNVC: 2
(241)A50091100012: RNCC: 5 | RNVC: 2

19 Nov 2007

5340-15-008-0751
Angle Bracket

150080751
60114023: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-195-3687
Padlock

151953687
DGB-13KL-067: RNCC: 3 | RNVC: 2
(241)AE591DGB-13KL-067: RNCC: 5 | RNVC: 2

21 Mar 2011

5340-15-130-7431
Angle Bracket

151307431
4529299: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-148-3544
Angle Bracket

151483544
104948: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-163-5196
Plain Solid Disk

151635196
04.08.003: RNCC: 3 | RNVC: 2

15 Oct 2002

5340-15-121-8864
Strap Fastener Loop

151218864
999-0500-57-3: RNCC: 3 | RNVC: 2

19 Mar 1996

5340-15-148-6389
Mending Plate

151486389
190509320: RNCC: 3 | RNVC: 2

17 Sep 1998

5340-15-147-3777
Screw Thread Insert

151473777
1300050075: RNCC: 3 | RNVC: 2
1300050075: RNCC: 5 | RNVC: 9

31 Oct 1997

5340-15-169-4991
Coat And Hat Hook

151694991
F72013310: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-177-3796
Mounting Plate

151773796
030806: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-179-9601
Butt Hinge Leaf

151799601
11.074.A: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-001-7903
Mounting Bracket

150017903
5949784739: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-151-1888
Mounting Bracket

151511888
AF060181106: RNCC: 3 | RNVC: 2

14 Apr 2000

5340-15-203-7234
Retaining Clip

152037234
00244R0020: RNCC: 3 | RNVC: 2
00244R0020: RNCC: 5 | RNVC: 2
CV173767: RNCC: 5 | RNVC: 2

27 Jun 2011

5340-15-181-1729
Loop Clamp

151811729
165040105: RNCC: 3 | RNVC: 2
(241)A0199165040105: RNCC: 5 | RNVC: 2

5 Nov 2008

5340-15-122-2216
Mounting Bracket

151222216
800070031: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-008-1818
Loop Clamp

150081818
60114315: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-206-9945
Plug Button

152069945
091453: RNCC: 3 | RNVC: 2
(241)A3593091453: RNCC: 5 | RNVC: 2

6 Aug 2012

5340-15-187-6015
Mounting Bracket

151876015
20.11.22.10: RNCC: 3 | RNVC: 2

14 Apr 2009

5340-15-107-6089
Butt Hinge Leaf

151076089
A72320-02-08: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-204-3640
Padlock

152043640
25150045: RNCC: 3 | RNVC: 2
(241)ACA6425150045: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-004-8677
Spring Tension Clip

150048677
92309-101: RNCC: 3 | RNVC: 2

28 Aug 1978

5340-15-109-9330
Threaded Rod End

151099330
K105-02: RNCC: 3 | RNVC: 2

1 Mar 1990

5340-15-157-9132
Angle Bracket

151579132
0-159031: RNCC: 3 | RNVC: 2
1PA39630-159031: RNCC: 5 | RNVC: 2
(241)A39630-159031: RNCC: 5 | RNVC: 2

24 Nov 2003

5340-15-102-8893
Spring Holder

151028893
1Q512379L: RNCC: 3 | RNVC: 2
1Q512379LA: RNCC: 3 | RNVC: 2
1Q512379L: RNCC: 5 | RNVC: 9
1Q512379LA: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-108-3115
Angle Bracket

151083115
60129419: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-120-0948
Spring Tension Clip

151200948
60142239: RNCC: 3 | RNVC: 2

19 Dec 1994

5340-15-118-4816
Rod End Clevis

151184816
02.0646.A.02: RNCC: 3 | RNVC: 2
02.0646.A.02: RNCC: 5 | RNVC: 9

7 Feb 1995

5340-15-117-2624
Cushioning Pad

151172624
132505013: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-15-206-9206
Butt Hinge

152069206
AW002HB01D1NL: RNCC: 3 | RNVC: 2
(241)A0126AW002HB01D1NL: RNCC: 5 | RNVC: 2

26 Jul 2012

5340-15-152-3504
Angle Bracket

151523504
0-159193: RNCC: 3 | RNVC: 2
00159193: RNCC: 3 | RNVC: 2
(241)A39630-159193: RNCC: 5 | RNVC: 2

4 Sep 2000

5340-15-147-6338
Mounting Bracket

151476338
738371-01: RNCC: 3 | RNVC: 2
738371-01: RNCC: 5 | RNVC: 9

5 Feb 1998

5340-15-207-4138
Plug Button

152074138
41003-09B: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-15-180-1509
Mounting Bracket

151801509
8741183: RNCC: 3 | RNVC: 2

15 Feb 2008

5340-15-001-8425
Mounting Bracket

150018425
500433751: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-204-3268
Butt Hinge

152043268
0000500428567: RNCC: 3 | RNVC: 2
(241)A39630000500428567: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-117-7179
Access Cover

151177179
1Q 283123LA: RNCC: 3 | RNVC: 2
1Q 283123LA: RNCC: 5 | RNVC: 9

23 Jan 1995

5340-15-117-5939
Access Cover

151175939
78/28/5/32: RNCC: 3 | RNVC: 2

8 Nov 1994

5340-15-148-5775
Bow Handle

151485775
129-0321-11-103: RNCC: 3 | RNVC: 2

31 Aug 1998

5340-15-114-0177
Access Cover

151140177
000205302750: RNCC: 5 | RNVC: 2
000205302750: RNCC: 5 | RNVC: 9

15 Apr 1992

5340-15-153-5202
Access Cover

151535202
142041028: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-111-3794
Strap Hinge

151113794
113A6022-002: RNCC: 3 | RNVC: 2

7 Sep 1990

5340-15-063-2506
Mending Plate

150632506
1376-17-256: RNCC: 3 | RNVC: 2
137617256: RNCC: 5 | RNVC: 2

1 Jun 1987

5340-15-059-3600
Retaining Strap

150593600
1127-40-197: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-178-7544
Access Cover

151787544
056755: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-118-2646
Loop Clamp

151182646
D0485446: RNCC: 3 | RNVC: 2

11 Apr 1995

5340-15-118-2036
Screw Thread Insert

151182036
13521370: RNCC: 3 | RNVC: 2

22 Apr 1994

5340-15-201-9277
Retaining Band

152019277
BMM 4309: RNCC: 3 | RNVC: 2
(241)A9260BMM 4309: RNCC: 5 | RNVC: 2

15 Jan 2007

5340-15-120-0891
Retaining Strap

151200891
335111756: RNCC: 3 | RNVC: 2
93190068: RNCC: 5 | RNVC: 2

19 Dec 1994

5340-15-006-4958
Angle Bracket

150064958
FL0716-101: RNCC: 3 | RNVC: 2

18 Dec 1979

5340-15-101-8521
Retaining Strap

151018521
808-73147-3: RNCC: 3 | RNVC: 2

23 Dec 1987

5340-15-157-9330
Mending Plate

151579330
0-101156: RNCC: 3 | RNVC: 2
(241)A39630-101156: RNCC: 5 | RNVC: 2
1PA39630-101156: RNCC: 5 | RNVC: 2

25 Nov 2003

5340-15-157-4175
Webbing Strap

151574175
990766: RNCC: 3 | RNVC: 2
(241)A3593990766: RNCC: 5 | RNVC: 2

11 Jul 2003

5340-15-117-4748
Access Cover

151174748
MC412.41E: RNCC: 3 | RNVC: 2

30 May 1994

5340-15-001-5889
Shimmy Damper

150015889
5801324174: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-063-9248
Retaining Strap

150639248
70-5111-02: RNCC: 3 | RNVC: 2

6 Dec 1982

5340-15-064-7251
Loop Clamp

150647251
10441690: RNCC: 3 | RNVC: 2

17 Nov 1983

5340-15-175-1786
Butt Hinge

151751786
422231: RNCC: 3 | RNVC: 2

21 Jan 2004

5340-15-061-0156
Retaining Strap

150610156
112433: RNCC: 3 | RNVC: 2

31 Mar 1976

5340-15-049-5295
Handle Grip

150495295
011-1903: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-111-7998
Angle Bracket

151117998
MF010260: RNCC: 3 | RNVC: 2

1 Jul 1990

5340-15-202-4521
Luggage Lock

152024521
1660/4: RNCC: 3 | RNVC: 2
(241)A52001660/4: RNCC: 5 | RNVC: 2

25 Mar 2007

5340-15-156-8854
Mounting Bracket

151568854
158839: RNCC: 3 | RNVC: 2

10 Mar 2003

5340-15-144-7691
Rod End Connector

151447691
109-0110-73-109: RNCC: 3 | RNVC: 2

24 Jan 1997

5340-15-155-0528
Angle Bracket

151550528
J92440147-001: RNCC: 3 | RNVC: 2

9 Jan 2002

5340-15-000-7243
Handle Grip

150007243
BRP-0331361: RNCC: 3 | RNVC: 2

3 Apr 2013

5340-15-059-2672
Butt Hinge Leaf

150592672
260-05-02-18: RNCC: 3 | RNVC: 2
260-05-02-18: RNCC: 5 | RNVC: 9

18 Nov 1975

5340-15-119-0244
Access Cover

151190244
70677899: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-149-7793
Corner Brace

151497793
251A1009-001: RNCC: 3 | RNVC: 2

25 May 1999

5340-15-220-3436
Key Holder

152203436
C-120-AV: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-117-2626
Mending Plate

151172626
132507141: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-15-117-7059
Retaining Strap

151177059
D9105005P: RNCC: 3 | RNVC: 2
D9105005P: RNCC: 5 | RNVC: 9

10 Jan 1995

5340-15-107-6088
Butt Hinge Leaf

151076088
A72317-01-20: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-060-4860
Access Door Hinge

150604860
23096-101: RNCC: 3 | RNVC: 2

12 May 1977

5340-15-157-8387
Screw Thread Insert

151578387
(241)A0178S4421130: RNCC: 3 | RNVC: 2
S4421130: RNCC: 3 | RNVC: 2

11 Nov 2003

5340-15-117-8831
Angle Bracket

151178831
SF260-05-263-05: RNCC: 3 | RNVC: 2
SF260-05-263-05: RNCC: 5 | RNVC: 9

28 Jan 1994

5340-15-202-5181
Blank Panel

152025181
999-0500-85-249: RNCC: 3 | RNVC: 2
(241)A0126999-0500-85-249: RNCC: 5 | RNVC: 2

26 Apr 2007

5340-15-109-7408
Angle Bracket

151097408
60132562: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-150-3423
Screw Thread Insert

151503423
37-10026-00: RNCC: 3 | RNVC: 2

29 Sep 1999

5340-15-001-8166
Mounting Bracket

150018166
5949783485: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-196-2014
Rim Lock Set

151962014
PN UAS 00002136: RNCC: 3 | RNVC: 2
5340F76011698: RNCC: 5 | RNVC: 9

31 Mar 2004

5340-15-100-1860
Plain Solid Disk

151001860
5038602100: RNCC: 3 | RNVC: 2

19 May 1994

5340-15-204-3482
Snap Hook

152043482
25920021: RNCC: 3 | RNVC: 2
(241)ACA6425920021: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-008-5936
Rod End Clevis

150085936
1/00078/11: RNCC: 3 | RNVC: 2
10007811: RNCC: 5 | RNVC: 2

27 Mar 1981

5340-15-060-6390
Mending Plate

150606390
27171-101: RNCC: 3 | RNVC: 2

29 Jun 1977

5340-15-109-7153
Loop Clamp

151097153
8984146: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-154-0198
Loop Clamp

151540198
73202A041002: RNCC: 5 | RNVC: 2
73202A041002: RNCC: 5 | RNVC: 9

15 Mar 2001

5340-15-178-2850
Access Cover

151782850
8.609.103: RNCC: 3 | RNVC: 2

29 Apr 2005

5340-15-109-1831
Mending Plate

151091831
60102667: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-004-7794
Loop Clamp

150047794
0-30343: RNCC: 3 | RNVC: 2

7 Sep 1977

5340-15-203-9513
Plain Solid Disk

152039513
389.2033.0000: RNCC: 3 | RNVC: 2
(241)AF479389.2033.0000: RNCC: 5 | RNVC: 2

29 Jul 2011

5340-15-187-4828
Loop Clamp

151874828
A079A058NB: RNCC: 1 | RNVC: 2
TA028N015NB58: RNCC: 3 | RNVC: 2
(241)04971TA028N015NB58: RNCC: 5 | RNVC: 2

3 Apr 2009

5340-15-156-5140
Rigid Caster

151565140
56805005: RNCC: 3 | RNVC: 2

21 Feb 2003

5340-15-202-9273
Blank Panel

152029273
999-0500-85-273: RNCC: 3 | RNVC: 2
(241)A0126999-0500-85-273: RNCC: 5 | RNVC: 2

27 Sep 2007

5340-15-153-2822
Loop Clamp

151532822
CFG1-30/12: RNCC: 2 | RNVC: 3
162530218: RNCC: 5 | RNVC: 3

12 Dec 2000

5340-15-206-8255
Mounting Bracket

152068255
ED0087250940-S: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-200-3010
Mending Plate

152003010
190509435: RNCC: 3 | RNVC: 2

29 Nov 2005

5340-15-162-9947
Access Cover

151629947
0047-0064: RNCC: 3 | RNVC: 2
935613: RNCC: 5 | RNVC: 2

9 Apr 2002

5340-15-007-2219
Retaining Strap

150072219
1397865: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-004-4269
Retaining Strap

150044269
68153-101A1: RNCC: 3 | RNVC: 2

14 Apr 1978

5340-15-112-0297
Bow Handle

151120297
ART.911/06.400: RNCC: 3 | RNVC: 2

19 Feb 1991

5340-15-181-1713
Control Rod

151811713
178950215: RNCC: 3 | RNVC: 2
(241)A0199178950215: RNCC: 5 | RNVC: 2

5 Nov 2008

5340-15-008-4129
Mending Plate

150084129
1236-31-147: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-109-3756
Cushioning Pad

151093756
5137-307-12: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-108-3680
Angle Bracket

151083680
233A2075-401: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-103-8557
Angle Bracket

151038557
8583166: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-181-0478
Mounting Plate

151810478
60166834: RNCC: 3 | RNVC: 2
(241)A424960166834: RNCC: 5 | RNVC: 2

8 Oct 2008

5340-15-151-6085
Retaining Strap

151516085
42024884: RNCC: 3 | RNVC: 2

19 Jun 2000

5340-15-007-2623
Angle Bracket

150072623
1387755: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-180-9292
Hook Handle

151809292
4500C159: RNCC: 3 | RNVC: 2
(241)A08104500C159: RNCC: 5 | RNVC: 2

19 Aug 2008

5340-15-179-6793
Angle Bracket

151796793
0000500413991: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-108-6731
Access Cover

151086731
1455-32-109: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-119-1415
Mending Plate

151191415
73125496: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-150-9042
Filler Opening Cap

151509042
21779004A: RNCC: 3 | RNVC: 2

27 Mar 2000

5340-15-102-1621
Retaining Strap

151021621
8269-10-04: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-148-5797
Butt Hinge Leaf

151485797
129-0340-01-189: RNCC: 3 | RNVC: 2

31 Aug 1998

5340-15-192-5192
Hand Crank

151925192
74-208157A: RNCC: 3 | RNVC: 2
(241)A331474-208157A: RNCC: 5 | RNVC: 2

24 Mar 2010

5340-15-150-3032
Flush Lock

151503032
B-171/2-VM90P: RNCC: 3 | RNVC: 2
42530358: RNCC: 5 | RNVC: 2

23 Sep 1999

5340-15-186-9303
Access Cover

151869303
134478: RNCC: 3 | RNVC: 2
0014761: RNCC: 5 | RNVC: 2

5 Jan 2009

5340-15-187-9484
Access Cover

151879484
1Q 605013: RNCC: 3 | RNVC: 2

3 Jun 2009

5340-15-187-3117
Retaining Band

151873117
UZ199: RNCC: 3 | RNVC: 2
(241)A9410UZ199: RNCC: 5 | RNVC: 2

11 Mar 2009

5340-15-089-1612
Handle Grip

150891612
6046773: RNCC: 3 | RNVC: 2
6046773: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-110-7872
Mending Plate

151107872
60110082: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-121-6989
Angle Bracket

151216989
70687675: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-151-2501
Access Cover

151512501
112710803: RNCC: 3 | RNVC: 2

8 Jun 2000

5340-15-178-7348
Angle Bracket

151787348
040281: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-101-6301
Plain Solid Disk

151016301
1MDR011: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-195-2283
Mounting Bracket

151952283
STAF/TV/SCAF: RNCC: 3 | RNVC: 2
(241)AH347STAF/TV/SCAF: RNCC: 5 | RNVC: 2

8 Mar 2011

5340-15-063-9923
Detent Plunger

150639923
1055-05-425: RNCC: 3 | RNVC: 2

16 Dec 1983

5340-15-054-8152
Spring Tension Clip

150548152
32-83-111: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-111-9490
Butt Hinge Leaf

151119490
700A2617-001: RNCC: 3 | RNVC: 2

30 Jan 1991

5340-15-119-4804
Mechanical Stop

151194804
35.118.001: RNCC: 3 | RNVC: 2
35-118-001: RNCC: 5 | RNVC: 2

9 Aug 1994

5340-15-009-7130
Angle Bracket

150097130
1236-09-181: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-109-3823
Mending Plate

151093823
5137-293-31: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-139-3988
Angle Bracket

151393988
4464337: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-201-2856
Handle Grip

152012856
122607636: RNCC: 3 | RNVC: 2

20 Jul 2006

5340-15-055-1115
Angle Bracket

150551115
5281-41: RNCC: 3 | RNVC: 2

5 May 1972

5340-15-154-3951
Loop Clamp

151543951
1001519905: RNCC: 3 | RNVC: 2
(241)A97721001519905: RNCC: 5 | RNVC: 2

22 May 2001

5340-15-061-3767
Mending Plate

150613767
P36HD18: RNCC: 5 | RNVC: 2
P36HD18: RNCC: 5 | RNVC: 9

22 Sep 1977

5340-15-188-6060
Mounting Bracket

151886060
A-112333/48-33: RNCC: 3 | RNVC: 2

13 Oct 2009

5340-15-102-0217
Hand Crank

151020217
W76A2-19: RNCC: 3 | RNVC: 2

30 Jan 1988

5340-15-056-9890
Loop Clamp

150569890
67171-01-007: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-113-1458
Retaining Strap

151131458
253A1132-001: RNCC: 3 | RNVC: 2

7 Oct 1990

5340-15-117-7640
Bow Handle

151177640
074GE00446B-03-MS-90: RNCC: 3 | RNVC: 2

27 Sep 1994

5340-15-115-9122
Butt Hinge Leaf

151159122
NOR2-481-08: RNCC: 3 | RNVC: 2

1 Feb 1993

5340-15-061-4747
Clip Retainer Plate

150614747
P135085-002: RNCC: 3 | RNVC: 2

30 Jan 1978

5340-15-149-9107
Access Cover

151499107
D0R0101653: RNCC: 3 | RNVC: 2

19 Jul 1999

5340-15-020-1052
Leather Strap

150201052
02-231E09: RNCC: 2 | RNVC: 2

10 Apr 1972

5340-15-155-7791
Retaining Strap

151557791
723009850000: RNCC: 3 | RNVC: 2
01-613 MSZN: RNCC: 3 | RNVC: 2

25 Jun 2002

5340-15-180-9288
Snap Hook

151809288
2102V061: RNCC: 3 | RNVC: 2
(241)A08102102V061: RNCC: 5 | RNVC: 2

19 Aug 2008

5340-15-003-8463
Screw Thread Insert

150038463
892.00895.249: RNCC: 5 | RNVC: 2
892.00895.249: RNCC: 5 | RNVC: 9

4 Jan 1985

5340-15-055-1341
Handle Grip

150551341
91543-25: RNCC: 3 | RNVC: 2

6 Apr 1972

5340-15-108-7600
Retaining Strap

151087600
60135627: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-108-7610
Angle Bracket

151087610
60141503: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-188-3482
Retaining Strap

151883482
45450400: RNCC: 3 | RNVC: 2
Z04.01.01.25: RNCC: 5 | RNVC: 2
5340PL0955267: RNCC: 6 | RNVC: 9

3 Sep 2009

5340-15-119-1886
Access Cover

151191886
75214977: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-120-6081
Mending Plate

151206081
204-8929-40-7: RNCC: 3 | RNVC: 2

10 Jul 1995

5340-15-115-3506
Spring Holder

151153506
538-08-1100: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-204-4620
Mounting Bracket

152044620
504148698: RNCC: 3 | RNVC: 2

7 Nov 2011

5340-15-114-7913
Mending Plate

151147913
8243.20.11S: RNCC: 3 | RNVC: 2

12 May 1993

5340-15-115-6913
Vent Plug

151156913
D0467385: RNCC: 3 | RNVC: 2

8 Mar 1994

5340-15-063-3683
Retaining Strap

150633683
60108146: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-121-5396
Threaded Rod End

151215396
132511201: RNCC: 3 | RNVC: 2

15 Jan 1996

5340-15-169-2153
Coat And Hat Hook

151692153
F72009121: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-118-4507
Angle Bracket

151184507
60147578: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-180-3310
Control Rod

151803310
(241)A4249504126919: RNCC: 3 | RNVC: 2
504126919: RNCC: 3 | RNVC: 2

18 Apr 2008

5340-15-058-7650
Handle Grip

150587650
1127-42-189: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-061-2195
Rod End Clevis

150612195
205-6-167-13: RNCC: 3 | RNVC: 2
205-6-167-13: RNCC: 5 | RNVC: 9

30 May 1977

5340-15-113-1673
Angle Bracket

151131673
277A2217-001: RNCC: 3 | RNVC: 2

7 Oct 1990

5340-15-006-4375
Rod End Clevis

150064375
204-8910-54-1: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-107-2579
Retaining Strap

151072579
5201-202-05: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-052-1300
Screw Thread Insert

150521300
N0R4-009-11: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-114-1144
Bow Handle

151141144
M.443/110: RNCC: 3 | RNVC: 2

11 Dec 1992

5340-15-187-9634
Handle Grip

151879634
285171/C1: RNCC: 3 | RNVC: 2

9 Jun 2009

5340-15-005-4526
Retaining Strap

150054526
1137-11-122: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-118-8599
Mounting Bracket

151188599
299701693U: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-058-6088
Bow Handle

150586088
1971-49-1: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-231-6108
Angle Bracket

152316108
0-174182: RNCC: 3 | RNVC: 2
534015E089667: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-201-3571
Vent Plug

152013571
3336680: RNCC: 3 | RNVC: 2
SPC4710136: RNCC: 5 | RNVC: 2
(241)A9840SPC4710136: RNCC: 5 | RNVC: 2

30 Jul 2006

5340-15-110-7950
Retaining Strap

151107950
94140-101A00: RNCC: 3 | RNVC: 2
94140-101: RNCC: 5 | RNVC: 2

22 Jul 1990

5340-15-206-7252
Access Door Hinge

152067252
206-031-111-23: RNCC: 3 | RNVC: 2
(241)A0126206-031-111-23: RNCC: 5 | RNVC: 2

6 Jul 2012

5340-15-195-2701
Mounting Bracket

151952701
3003C500F2: RNCC: 3 | RNVC: 2
3003C500F2: RNCC: 5 | RNVC: 2

9 Mar 2011

5340-15-118-9516
Loop Clamp

151189516
75204416: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-197-1749
Rim Lock Set

151971749
PN UAS 00037059: RNCC: 3 | RNVC: 2
5340F76031826: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-121-9889
Angle Bracket

151219889
60173285: RNCC: 3 | RNVC: 2

4 Apr 1996

5340-15-157-4255
Rod End Clevis

151574255
21505845: RNCC: 3 | RNVC: 2

14 Jul 2003

5340-15-062-5354
Retaining Strap

150625354
168236 E: RNCC: 3 | RNVC: 2

1 May 1977

5340-15-179-6955
Mounting Bracket

151796955
00161084: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-187-2059
Mounting Bracket

151872059
SC 100 683: RNCC: 3 | RNVC: 2
(241)A3980SC100683: RNCC: 5 | RNVC: 2

24 Feb 2009

5340-15-001-4342
Mounting Bracket

150014342
500436415: RNCC: 3 | RNVC: 2

2 Jul 2013

5340-15-060-7015
Mending Plate

150607015
P36HC37: RNCC: 5 | RNVC: 2
P36HC37: RNCC: 5 | RNVC: 9

12 Sep 1977

5340-15-118-4423
Angle Bracket

151184423
60153330: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-162-2594
Access Cover

151622594
74-13314: RNCC: 3 | RNVC: 2
4625092A: RNCC: 5 | RNVC: 2

17 May 2001

5340-15-105-8400
Retaining Band

151058400
276-3615-99: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-120-4526
Access Cover

151204526
142505016: RNCC: 3 | RNVC: 2

25 May 1995

5340-15-051-2809
Mending Plate

150512809
4009064: RNCC: 3 | RNVC: 2
4009064: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-020-2238
Strap Fastener Loop

150202238
02-231-E-04-19: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-188-7652
Drift Bolt

151887652
MOR35362550CH: RNCC: 3 | RNVC: 2
(241)AG622MOR35362550CH: RNCC: 5 | RNVC: 2

13 Nov 2009

5340-15-007-2414
Loop Clamp

150072414
4036349: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-119-1593
Expansion Plug

151191593
75208216: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-117-7848
Bridge Clamp

151177848
60149350: RNCC: 3 | RNVC: 2

25 Jan 1994

5340-15-064-0095
Expansion Plug

150640095
2300-23304: RNCC: 3 | RNVC: 2
230023304: RNCC: 5 | RNVC: 2

27 Oct 1983

5340-15-052-0111
Handle Grip

150520111
B910-20-37: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-120-5461
Bow Handle

151205461
SF260-14-433-01: RNCC: 3 | RNVC: 2
SF260-14-433-01: RNCC: 5 | RNVC: 9

28 Jun 1995

5340-15-120-1407
Spring Holder

151201407
D0489314: RNCC: 3 | RNVC: 2
489314: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-15-204-0284
Mounting Bracket

152040284
154227398: RNCC: 3 | RNVC: 2

19 Aug 2011

5340-15-000-5153
Mounting Bracket

150005153
DR200: RNCC: 3 | RNVC: 2

13 Mar 2013

5340-15-187-8198
Mounting Bracket

151878198
018.066.00.34: RNCC: 3 | RNVC: 2
018.066.00.34: RNCC: 5 | RNVC: 2
(241)A6479018.066.00.34: RNCC: 5 | RNVC: 2

7 May 2009

5340-15-061-4577
Loop Clamp

150614577
P36ML11: RNCC: 5 | RNVC: 2
P36ML11: RNCC: 5 | RNVC: 9

12 Oct 1977

5340-15-111-3101
Mending Plate

151113101
60116171: RNCC: 3 | RNVC: 2

15 Oct 1988

5340-15-007-2999
Runner

150072999
9478253: RNCC: 3 | RNVC: 2

7 Jan 2014

5340-15-068-6552
Spring Tension Clip

150686552
18826-1 T13805-1: RNCC: 3 | RNVC: 2

26 Aug 1986

5340-15-003-8194
Angle Bracket

150038194
AEP-15144: RNCC: 3 | RNVC: 2

21 Mar 1985

5340-15-162-1442
Bow Handle

151621442
341-0052/01: RNCC: 3 | RNVC: 2

2 Mar 2001

5340-15-103-8711
Loop Clamp

151038711
8584545: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-187-8186
Mounting Bracket

151878186
018.066.00.22: RNCC: 3 | RNVC: 2
(241)A6479018.066.00.22: RNCC: 5 | RNVC: 2
018.066.00.22: RNCC: 5 | RNVC: 2

7 May 2009

5340-15-113-5441
Angle Bracket

151135441
355A9043-001: RNCC: 3 | RNVC: 2

14 Jan 1992

5340-15-180-4572
Loop Clamp

151804572
41231094: RNCC: 3 | RNVC: 2
(241)A424941231094: RNCC: 5 | RNVC: 2

27 May 2008

5340-15-045-3919
Webbing Strap

150453919
N0R4-109-00-8: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-009-2479
Angle Bracket

150092479
P-882722-002: RNCC: 3 | RNVC: 2
P882722-002: RNCC: 5 | RNVC: 2

2 Sep 1980

5340-15-148-9846
Mounting Bracket

151489846
879 68: RNCC: 3 | RNVC: 2
879 68: RNCC: 5 | RNVC: 9

9 Nov 1998

5340-15-177-3997
Mounting Bracket

151773997
040424: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-051-0876
Handle Grip

150510876
33881: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-000-4330
Retaining Band

150004330
4260025160N: RNCC: 3 | RNVC: 2

1 Mar 2013

5340-15-057-4204
Mending Plate

150574204
C241158C: RNCC: 5 | RNVC: 2
C241158C: RNCC: 5 | RNVC: 9

10 Nov 1974

5340-15-175-0264
Rod End Connector

151750264
B12101-368: RNCC: 3 | RNVC: 2

29 Dec 2003

5340-15-045-3924
Loop Clamp

150453924
N0R4-110-10-6: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-004-9058
Clip Retainer Plate

150049058
24111-101: RNCC: 3 | RNVC: 2

31 May 1978

5340-15-005-0459
Webbing Strap

150050459
0-33389: RNCC: 3 | RNVC: 2

7 Sep 1977

5340-15-001-3504
Loop Clamp

150013504
109-0030-53-109: RNCC: 3 | RNVC: 2

18 Jun 2013

5340-15-147-3659
Access Cover

151473659
109-0745-93-119: RNCC: 3 | RNVC: 2

31 Oct 1997

5340-15-178-6968
Webbing Strap

151786968
01155-2-01213-3500: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-206-2615
Bridge Clamp

152062615
504055336: RNCC: 3 | RNVC: 2

1 Jun 2012

5340-15-109-6226
Loop Clamp

151096226
002893: RNCC: 3 | RNVC: 2

2 Dec 1989

5340-15-052-2227
Loop Clamp

150522227
N0R4-110-10-7: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-008-1398
Butt Hinge Leaf

150081398
S.205-7-054-11: RNCC: 3 | RNVC: 2
S.205-7-054-11: RNCC: 5 | RNVC: 9

22 Apr 1981

5340-15-169-4044
Angle Bracket

151694044
F72011598: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-109-1350
Plug Button

151091350
60135420: RNCC: 3 | RNVC: 2

30 Apr 1988

5340-15-118-2035
Screw Thread Insert

151182035
17849770: RNCC: 3 | RNVC: 2

22 Apr 1994

5340-15-186-9696
Mounting Plate

151869696
1MB0399001: RNCC: 3 | RNVC: 2
504195617: RNCC: 5 | RNVC: 2
(241)A4249504195617: RNCC: 5 | RNVC: 2

14 Jan 2009

5340-15-100-2042
Expansion Plug

151002042
303134: RNCC: 3 | RNVC: 2
303134: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-061-4269
Mending Plate

150614269
P26CB24: RNCC: 5 | RNVC: 2
P26CB24: RNCC: 5 | RNVC: 9

12 Oct 1977

5340-15-105-0123
Access Cover

151050123
303-43-0143: RNCC: 3 | RNVC: 2

14 Apr 1987

5340-15-109-4094
Rod End Clevis

151094094
808-17121-6: RNCC: 3 | RNVC: 2

8 Jan 1990

5340-15-064-0116
Door Handle

150640116
1127-19-012: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-100-8096
Butt Hinge Leaf

151008096
109-0640-50-142: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-15-193-7101
Mounting Bracket

151937101
4212227-02: RNCC: 3 | RNVC: 2

2 Jul 2010

5340-15-178-6097
Rod End Clevis

151786097
S205-6-167-11: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-109-1805
Retaining Strap

151091805
1372335: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-154-4046
Angle Bracket

151544046
A6120-91094-8: RNCC: 3 | RNVC: 2

22 May 2001

5340-15-121-7478
Recess Handle

151217478
0305 00016: RNCC: 3 | RNVC: 2
1PA3488PL0000643: RNCC: 5 | RNVC: 2
8506026: RNCC: 5 | RNVC: 2
PL0000643: RNCC: 5 | RNVC: 2

14 Feb 1996

5340-15-113-1329
Angle Bracket

151131329
37956846200: RNCC: 3 | RNVC: 2
93155429: RNCC: 5 | RNVC: 2

23 Feb 1989

5340-15-108-9870
Angle Bracket

151089870
1374577: RNCC: 3 | RNVC: 2

9 May 1988

5340-15-204-5929
Eye Hook

152045929
SKS10: RNCC: 3 | RNVC: 2

22 Nov 2011

5340-15-109-4840
Retaining Strap

151094840
D9104051P: RNCC: 3 | RNVC: 2
D9104051P: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-154-0936
Angle Bracket

151540936
0-150502: RNCC: 3 | RNVC: 2
(241)A39630-150502: RNCC: 5 | RNVC: 2
1PA39630-150502: RNCC: 5 | RNVC: 2

20 Mar 2001

5340-15-100-4477
Spring Tension Clip

151004477
2-15873-101-77118A1: RNCC: 3 | RNVC: 2

24 Mar 1987

5340-15-198-0960
Block Clamp

151980960
AIT13901GGE5139: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-15-221-7475
Handle Grip

152217475
100515R547712: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-109-1793
Retaining Strap

151091793
60101111: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-107-1049
Spring Holder

151071049
301-01-1300: RNCC: 3 | RNVC: 2

14 Apr 1987

5340-15-061-4167
Angle Bracket

150614167
P-135340-002: RNCC: 3 | RNVC: 2
P135340-002: RNCC: 5 | RNVC: 2

20 Jan 1978

5340-15-120-2504
Webbing Strap

151202504
60159708: RNCC: 3 | RNVC: 2

6 Mar 1995

5340-15-109-1642
Angle Bracket

151091642
211820G1: RNCC: 3 | RNVC: 2

5 Oct 1989

5340-15-074-3984
Retaining Strap

150743984
18UNI216CD: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-100-8819
Angle Bracket

151008819
328341G1: RNCC: 3 | RNVC: 2
328341G1: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-063-2712
Angle Bracket

150632712
60102128: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-153-0643
Flush Catch

151530643
A186A063S123A: RNCC: 3 | RNVC: 2

17 Nov 2000

5340-15-059-8327
Retaining Band

150598327
10-70-50-01: RNCC: 3 | RNVC: 2

10 Apr 1975

5340-15-148-5845
Butt Hinge Leaf

151485845
129-0340-01-305: RNCC: 3 | RNVC: 2

31 Aug 1998

5340-15-003-9119
Mounting Plate

150039119
182741323: RNCC: 3 | RNVC: 2
(241)A0199182741323: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-201-9456
Retaining Band

152019456
504069508: RNCC: 3 | RNVC: 2
(241)A4249504069508: RNCC: 5 | RNVC: 2

16 Jan 2007

5340-15-066-4360
Plain Solid Disk

150664360
1127-63-346: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-004-8033
Angle Bracket

150048033
P-110580-004: RNCC: 3 | RNVC: 2
P110580-004: RNCC: 5 | RNVC: 2

18 Jul 1978

5340-15-206-3503
Mounting Bracket

152063503
50040 1129: RNCC: 3 | RNVC: 2

4 Jun 2012

5340-15-157-1798
Loop Clamp

151571798
A079A016NB: RNCC: 3 | RNVC: 2

15 May 2003

5340-15-147-7690
Angle Bracket

151477690
611-0078: RNCC: 3 | RNVC: 2

6 Apr 1998

5340-15-149-3123
Retaining Strap

151493123
4885998: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-118-4009
Angle Bracket

151184009
60159973: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-109-0191
Handle Grip

151090191
1364038: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-109-5766
Angle Bracket

151095766
20530836A: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-108-6264
Retaining Strap

151086264
7302007: RNCC: 3 | RNVC: 2
A040015-006: RNCC: 5 | RNVC: 2

30 Mar 1988

5340-15-109-0859
Retaining Strap

151090859
81205: RNCC: 3 | RNVC: 2
4342670: RNCC: 3 | RNVC: 2
04342670: RNCC: 5 | RNVC: 2

14 Jun 1988

5340-15-001-7841
Mounting Bracket

150017841
5949785259: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-178-9593
Loop Clamp

151789593
10156: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-15-194-4043
Mounting Bracket

151944043
76191916: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-15-007-2423
Loop Clamp

150072423
4679479: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-008-3588
Bow Handle

150083588
310-0623/01: RNCC: 3 | RNVC: 2

4 May 1981

5340-15-119-1288
Bow Handle

151191288
73122520: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-059-2480
Retaining Strap

150592480
1127-15-994: RNCC: 3 | RNVC: 2

12 Oct 1974

5340-15-149-3107
Mending Plate

151493107
4885906: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-107-9418
Retaining Strap

151079418
1376-97-497: RNCC: 3 | RNVC: 2
137697497: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-121-9908
Retaining Strap

151219908
17317290: RNCC: 3 | RNVC: 2

4 Apr 1996

5340-15-203-6769
Mounting Bracket

152036769
504332585: RNCC: 3 | RNVC: 2

24 Jun 2011

5340-15-001-7963
Mounting Bracket

150017963
5949789345: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-187-2034
Mounting Bracket

151872034
SC 100 661: RNCC: 3 | RNVC: 2
(241)A3980SC100661: RNCC: 5 | RNVC: 2

24 Feb 2009

5340-15-111-8404
Rim Latch

151118404
32.25.018.0: RNCC: 3 | RNVC: 2
9988333: RNCC: 5 | RNVC: 2

14 Jun 1988

5340-15-194-3418
Loop Clamp

151943418
999RL3617224: RNCC: 3 | RNVC: 2

4 Nov 2010

5340-15-122-2214
Mounting Bracket

151222214
800069701: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-062-2009
Bow Handle

150622009
P-892875-001: RNCC: 3 | RNVC: 2
P892875-001: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-089-5824
Butt Hinge

150895824
16936-150: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-206-7950
Retaining Clip

152067950
500416692: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-151-1143
Mounting Bracket

151511143
380-2056/01: RNCC: 3 | RNVC: 2

21 Mar 2000

5340-15-111-9493
Butt Hinge Leaf

151119493
700A3603-003: RNCC: 3 | RNVC: 2

30 Jan 1991

5340-15-062-2734
Mending Plate

150622734
1141-34-127: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-155-4400
Swivel Caster

151554400
TIPO SKM 125X37.5: RNCC: 3 | RNVC: 2

25 Mar 2002

5340-15-118-6555
Loop Clamp

151186555
70925280: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-108-5119
Strap Hinge

151085119
82178: RNCC: 3 | RNVC: 2
4696895: RNCC: 5 | RNVC: 2
04696895: RNCC: 5 | RNVC: 2

14 Jun 1988

5340-15-104-4355
Expansion Plug

151044355
2.3139.001.1: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-062-3699
Angle Bracket

150623699
012289 T: RNCC: 3 | RNVC: 2

31 Dec 1978

5340-15-163-3801
Bridge Clamp

151633801
9447330: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-062-7940
Retaining Strap

150627940
0-34191: RNCC: 3 | RNVC: 2

28 Aug 1982

5340-15-163-3895
Mounting Bracket

151633895
9479426: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-007-2622
Loop Clamp

150072622
1387753: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-150-1027
Mounting Bracket

151501027
120013402: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-133-9228
Angle Bracket

151339228
4617012: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-148-3480
Angle Bracket

151483480
103541: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-062-2735
Mending Plate

150622735
1141-31-139: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-058-2986
Handle Grip

150582986
1127-44-124: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-057-9814
Access Door Hinge

150579814
A1-23504-401: RNCC: 3 | RNVC: 2
A1-23504-401: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-005-7001
Butt Hinge Leaf

150057001
A1-16010-001: RNCC: 3 | RNVC: 2
A1-16010-001: RNCC: 5 | RNVC: 9

10 Apr 1979

5340-15-005-0432
Angle Bracket

150050432
0-33394: RNCC: 3 | RNVC: 2

7 Sep 1977

5340-15-121-5785
Loop Clamp

151215785
1Z 589441: RNCC: 3 | RNVC: 2
1Z 589441: RNCC: 5 | RNVC: 9

18 Sep 1996

5340-15-189-2558
Mounting Bracket

151892558
0088362280: RNCC: 3 | RNVC: 2
0088362280: RNCC: 5 | RNVC: 2
0088362280: RNCC: 5 | RNVC: 2

10 Feb 2010

5340-15-007-8871
Strap Hinge

150078871
1385125: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-163-3631
Loop Clamp

151633631
4806611: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-112-3824
Loop Clamp

151123824
031594/1: RNCC: 3 | RNVC: 2

1 Jul 1990

5340-15-201-7747
Strap Hinge

152017747
20330-10/1: RNCC: 3 | RNVC: 2
190509077: RNCC: 5 | RNVC: 2

12 Dec 2006

5340-15-107-6073
Plug Button

151076073
999-5001-10-147: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-116-2680
Loop Clamp

151162680
190518250: RNCC: 3 | RNVC: 2

15 Apr 1993

5340-15-150-1030
Mounting Bracket

151501030
120013645: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-180-1769
Pipe Hanger

151801769
187.05.140: RNCC: 3 | RNVC: 2

15 Feb 2008

5340-15-001-7892
Mounting Bracket

150017892
5949782924: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-153-0609
Angle Bracket

151530609
0-159700: RNCC: 3 | RNVC: 2
1PA39630-159700: RNCC: 5 | RNVC: 2

15 Nov 2000

5340-15-178-4882
Support Hook

151784882
500351024: RNCC: 3 | RNVC: 2
A450013-000: RNCC: 5 | RNVC: 2

1 Jul 2005

5340-15-111-4052
Permanent Magnet

151114052
DOR0112698: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-003-3740
Mounting Bracket

150033740
01.00440: RNCC: 3 | RNVC: 2

5 Nov 2013

5340-15-177-3934
Mounting Plate

151773934
036509: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-118-6961
Mounting Bracket

151186961
73139654: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-045-3568
Retaining Strap

150453568
740-20-16: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-007-5322
Angle Bracket

150075322
1239-01-144: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-060-2360
Butt Hinge

150602360
1971TAV69-190TT0NECR0MAT0: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-120-2073
Expansion Plug

151202073
26-6-91-08-01: RNCC: 3 | RNVC: 2
TAP-01T4330: RNCC: 5 | RNVC: 2

16 Feb 1995

5340-15-050-2261
Rod End Clevis

150502261
4-3175-201-41823-2: RNCC: 3 | RNVC: 2
4-3175-2-01-41823-2: RNCC: 5 | RNVC: 2

10 Apr 1974

5340-15-116-4780
Mending Plate

151164780
60161245: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-103-0042
Retaining Strap

151030042
73117741: RNCC: 3 | RNVC: 2

21 Jun 1987

5340-15-073-8763
Rim Lock

150738763
39B90X60CR0MATA: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-050-4607
Strap Fastener Loop

150504607
04-072-044X2: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-119-2385
Mounting Bracket

151192385
129-0340-52-101: RNCC: 3 | RNVC: 2

5 Jul 1994

5340-15-179-2685
Access Cover

151792685
109-0816-38-113: RNCC: 3 | RNVC: 2

10 Aug 2006

5340-15-169-1725
Coat And Hat Hook

151691725
F72008691: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-157-4221
Mending Plate

151574221
21505709: RNCC: 3 | RNVC: 2

14 Jul 2003

5340-15-147-8742
Mounting Plate

151478742
129449: RNCC: 3 | RNVC: 2

18 May 1998

5340-15-007-5212
Angle Bracket

150075212
1239-03-900: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-102-0793
Butt Hinge Leaf

151020793
213A7199-001: RNCC: 3 | RNVC: 2

29 Jul 1988

5340-15-106-7549
Angle Bracket

151067549
605020: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-116-1622
Rod End Connector

151161622
68342-101A1: RNCC: 3 | RNVC: 2

17 Mar 1993

5340-15-089-5822
Butt Hinge

150895822
16940-150: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-112-6142
Screw Thread Insert

151126142
2106-02505: RNCC: 3 | RNVC: 2
M 6X1 1D: RNCC: 5 | RNVC: 2

12 Apr 1995

5340-15-065-7246
Access Door Hinge

150657246
109-0503-26-2: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-15-121-8960
Mending Plate

151218960
142504127: RNCC: 3 | RNVC: 2

19 Mar 1996

5340-15-062-5239
Retaining Strap

150625239
1141-31-904: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-151-2664
Angle Bracket

151512664
00085153: RNCC: 3 | RNVC: 2

4 May 2000

5340-15-052-2054
Retaining Strap

150522054
8-023-032: RNCC: 3 | RNVC: 2
8-023-032: RNCC: 5 | RNVC: 9
8-023-032: RNCC: 5 | RNVC: 9

4 Oct 1971

5340-15-178-2819
Bow Handle

151782819
10544-SS-2520-7-38B: RNCC: 3 | RNVC: 2

29 Apr 2005

5340-15-000-7269
Retaining Strap

150007269
BRP-0336730: RNCC: 3 | RNVC: 2

3 Apr 2013

5340-15-150-3426
Screw Thread Insert

151503426
37-10236-00: RNCC: 3 | RNVC: 2

29 Sep 1999

5340-15-068-8363
Handle Grip

150688363
66S61155-009: RNCC: 3 | RNVC: 2

6 Oct 1986

5340-15-203-2378
Bow Handle

152032378
32HJ04543413S01-010N: RNCC: 3 | RNVC: 2

10 Dec 2007

5340-15-103-4689
Rod End Clevis

151034689
301-5000-00: RNCC: 3 | RNVC: 2

9 Feb 1988

5340-15-089-9659
Rod End Clevis

150899659
5-1743-1-01-29778-3A: RNCC: 3 | RNVC: 2
5-1743-101-29778-3A: RNCC: 3 | RNVC: 2

7 Oct 1981

5340-15-154-2111
Angle Bracket

151542111
0-169322: RNCC: 3 | RNVC: 2
(241)A39630-169322: RNCC: 5 | RNVC: 2
1PA39630-169322: RNCC: 5 | RNVC: 2

28 Mar 2001

5340-15-178-4067
Rod End Clevis

151784067
UNI-ISO 2415-S-DW-20: RNCC: 2 | RNVC: 2

31 May 2005

5340-15-109-5761
Angle Bracket

151095761
20530755A: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-060-2898
Screw Thread Insert

150602898
1376-31-387: RNCC: 3 | RNVC: 2
137631387: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-121-0608
Screw Thread Insert

151210608
M5(X0.8)X1D-ACC.INOX18/8AUST.PAS: RNCC: 3 | RNVC: 2
210602504: RNCC: 5 | RNVC: 2

21 Sep 1995

5340-15-187-3628
Self-Locking Insert

151873628
701/16505: RNCC: 3 | RNVC: 2
(241)AD751701/16505: RNCC: 5 | RNVC: 2
701/16505: RNCC: 5 | RNVC: 2

19 Mar 2009

5340-15-187-3625
Self-Locking Insert

151873625
701/00021: RNCC: 3 | RNVC: 2
(241)AD751701/00021: RNCC: 5 | RNVC: 2
701/00021: RNCC: 5 | RNVC: 2

19 Mar 2009

5340-15-105-8977
Spring Tension Clip

151058977
350/23: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-050-4608
Strap Fastener Loop

150504608
DIS04-072-044X3: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-064-2042
Screw Thread Insert

150642042
590-962-306: RNCC: 3 | RNVC: 2
590.962.306: RNCC: 5 | RNVC: 2
590.962.306: RNCC: 5 | RNVC: 2

6 Dec 1983

5340-15-001-5806
Retaining Bail

150015806
42566649: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-204-5452
Lock Key

152045452
00092906: RNCC: 3 | RNVC: 2

16 Nov 2011

5340-15-205-3588
Caster Wheel

152053588
30-6164-27/2: RNCC: 3 | RNVC: 2

2 Mar 2012

5340-15-061-4178
Angle Bracket

150614178
P-135341-001: RNCC: 3 | RNVC: 2
P135341-001: RNCC: 5 | RNVC: 2

20 Jan 1978

5340-15-109-2707
Bow Handle

151092707
0-106828: RNCC: 3 | RNVC: 2
1PA39630-106828: RNCC: 5 | RNVC: 2

8 Mar 1988

5340-15-121-4350
Access Cover

151214350
554131310000: RNCC: 3 | RNVC: 2
541-31-3100: RNCC: 5 | RNVC: 2
5-1881B43152-1419: RNCC: 5 | RNVC: 2

17 Oct 1996

5340-15-116-3499
Rod End Clevis

151163499
802720017: RNCC: 3 | RNVC: 2

28 Apr 1993

5340-15-157-5144
Mounting Bracket

151575144
301-1634/01: RNCC: 3 | RNVC: 2
(241)A0069301-1634/01: RNCC: 5 | RNVC: 2

11 Sep 2003

5340-15-113-1471
Butt Hinge

151131471
311A2954-003: RNCC: 3 | RNVC: 2

7 Oct 1990

5340-15-118-2604
Angle Bracket

151182604
D1410837: RNCC: 3 | RNVC: 2

10 Apr 1995

5340-15-153-7742
Access Cover

151537742
02700A103100: RNCC: 5 | RNVC: 2
T0064951: RNCC: 5 | RNVC: 2
02700A103100: RNCC: 5 | RNVC: 9

28 Feb 2001

5340-15-063-5662
Retaining Band

150635662
SF260-04-30-5: RNCC: 3 | RNVC: 2
SF260-04-30-5: RNCC: 5 | RNVC: 9

5 Apr 1983

5340-15-193-9944
Mortise Latch

151939944
109-0360-80-202: RNCC: 3 | RNVC: 2

12 Aug 2010

5340-15-155-3492
Strap Hinge

151553492
1PA5645ST/054: RNCC: 3 | RNVC: 2
ST/054: RNCC: 3 | RNVC: 2

28 Feb 2002

5340-15-051-3157
Expansion Plug

150513157
1-01589-01: RNCC: 3 | RNVC: 2
10158901: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-187-6465
Rod End Clevis

151876465
109-0362-03-103: RNCC: 3 | RNVC: 2
(241)A0126109-0362-03-103: RNCC: 5 | RNVC: 2

15 Apr 2009

5340-15-151-7009
Angle Bracket

151517009
60118212: RNCC: 3 | RNVC: 2

3 Jul 2000

5340-15-002-9310
Protection Bellows

150029310
111146: RNCC: 3 | RNVC: 2
(241)A3593111146: RNCC: 5 | RNVC: 2

18 Oct 2013

5340-15-074-3987
Retaining Strap

150743987
24UNI2136: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-112-0529
Handle Grip

151120529
244A1222-401: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-158-5223
Retaining Band

151585223
251A1080-003: RNCC: 3 | RNVC: 2

1 Mar 2004

5340-15-063-5944
Retaining Strap

150635944
4112294: RNCC: 3 | RNVC: 2
4112294: RNCC: 5 | RNVC: 9

13 Nov 1982

5340-15-204-4432
Bridge Clamp

152044432
42560615: RNCC: 3 | RNVC: 2

7 Nov 2011

5340-15-117-4817
Retaining Strap

151174817
20512351A: RNCC: 3 | RNVC: 2

27 Oct 1993

5340-15-112-1902
Retaining Strap

151121902
311A2168-001: RNCC: 3 | RNVC: 2

8 Mar 1991

5340-15-051-7995
Loop Clamp

150517995
1-02925-90: RNCC: 3 | RNVC: 2
10292590: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-089-5817
Butt Hinge

150895817
16946-125: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-156-6501
Drift Bolt

151566501
PUNTA PARIGI DIAM.6MM-L-150MM: RNCC: 3 | RNVC: 2

3 Mar 2003

5340-15-153-9472
Retaining Strap

151539472
142062161: RNCC: 2 | RNVC: 3

12 Mar 2001

5340-15-119-7870
Mechanical Stop

151197870
75205259: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-053-2547
Rod End Connector

150532547
2-3021-101-41701-2: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-007-7690
Bail Handle

150077690
1385996: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-118-4493
Angle Bracket

151184493
60154193: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-157-9228
Angle Bracket

151579228
0-163662: RNCC: 3 | RNVC: 2
(241)A39630-163662: RNCC: 5 | RNVC: 2
1PA39630-163662: RNCC: 5 | RNVC: 2

24 Nov 2003

5340-15-151-1904
Mounting Bracket

151511904
0-82784: RNCC: 1 | RNVC: 2
IAXX0191205: RNCC: 3 | RNVC: 2
1PA39630-82784: RNCC: 4 | RNVC: 1
(241)A39630-82784: RNCC: 5 | RNVC: 2
1PA39630-117015: RNCC: 5 | RNVC: 2

14 Apr 2000

5340-15-061-4117
Angle Bracket

150614117
P120296-401: RNCC: 3 | RNVC: 2

20 Jan 1978

5340-15-117-9097
Butt Hinge Leaf

151179097
214A2028-016: RNCC: 3 | RNVC: 2

31 Jan 1994

5340-15-008-4132
Mending Plate

150084132
1236-80-102: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-149-2944
Mending Plate

151492944
4882408: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-122-2878
Mounting Bracket

151222878
800069428: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-117-4860
Retaining Strap

151174860
06593-101B00: RNCC: 3 | RNVC: 2
06593-101BOO: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-15-187-4633
Butt Hinge

151874633
423-7076: RNCC: 3 | RNVC: 2
(241)AA136423-7076: RNCC: 5 | RNVC: 2

2 Apr 2009

5340-15-008-9995
Access Door Hinge

150089995
109-0310-22-2: RNCC: 3 | RNVC: 2

11 Jun 1981

5340-15-068-6619
Butt Hinge Leaf

150686619
204-1510-01-16: RNCC: 3 | RNVC: 2

9 Dec 1985

5340-15-153-2569
Butt Hinge

151532569
122606274: RNCC: 2 | RNVC: 3

12 Dec 2000

5340-15-180-4522
Loop Clamp

151804522
504210364: RNCC: 3 | RNVC: 2
(241)A4249504210364: RNCC: 5 | RNVC: 2

27 May 2008

5340-15-050-9237
Retaining Clip

150509237
2T18826-1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-007-0648
Plain Solid Disk

150070648
1026-02-177: RNCC: 3 | RNVC: 2

29 Jul 1977

5340-15-049-5247
Handle Grip

150495247
7-5731-200-44791-1: RNCC: 3 | RNVC: 2
7-5731-2-00-44791-1: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-154-1993
Angle Bracket

151541993
0-168009: RNCC: 3 | RNVC: 2
1PA39630-168009: RNCC: 5 | RNVC: 2
(241)A39630-168009: RNCC: 5 | RNVC: 2

28 Mar 2001

5340-15-179-7067
Block Clamp

151797067
00108897: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-152-0288
Loop Clamp

151520288
0-163887: RNCC: 3 | RNVC: 2

2 Aug 2000

5340-15-193-1832
Lock Key

151931832
00620.01.0.00.00.PP: RNCC: 3 | RNVC: 2
W20: RNCC: 3 | RNVC: 2

20 Apr 2010

5340-15-194-0039
Mounting Bracket

151940039
109-0021-16-1: RNCC: 3 | RNVC: 2

12 Aug 2010

5340-15-045-2927
Loop Clamp

150452927
N0R2-505-06-15B: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-122-3035
Mounting Bracket

151223035
AR103-11MP: RNCC: 3 | RNVC: 2
627484L: RNCC: 5 | RNVC: 2

25 Jun 1996

5340-15-052-1298
Loop Clamp

150521298
N0R2-505-06-9B: RNCC: 3 | RNVC: 2

1 Jan 1974

Load More Results