What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 26 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 26 of 72

5340-15-162-5497
Compression Cup

151625497
4152455: RNCC: 3 | RNVC: 2

25 Sep 2001

5340-15-204-4878
Mounting Plate

152044878
219939801: RNCC: 3 | RNVC: 2
219939801: RNCC: 5 | RNVC: 2
CV173710: RNCC: 5 | RNVC: 2

7 Nov 2011

5340-15-119-0179
Angle Bracket

151190179
70658594: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-109-3894
Mending Plate

151093894
5137-014-20: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-001-1310
Mounting Plate

150011310
412-1105-67-103: RNCC: 3 | RNVC: 2

31 May 2013

5340-15-153-4909
Plain Solid Disk

151534909
D1420500: RNCC: 3 | RNVC: 2

2 Feb 2001

5340-15-120-0959
Bow Handle

151200959
60173548: RNCC: 3 | RNVC: 2

19 Dec 1994

5340-15-157-5174
Flush Catch

151575174
A186A050S150A: RNCC: 3 | RNVC: 2

12 Sep 2003

5340-15-187-4627
Bow Handle

151874627
347-8248: RNCC: 3 | RNVC: 2
(241)AA136347-8248: RNCC: 5 | RNVC: 2

2 Apr 2009

5340-15-074-3932
Retaining Strap

150743932
B8UNAV1046A37UNI743CD: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-074-3936
Retaining Strap

150743936
B16UNAV1046A37UN1743CD: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-063-7513
Loop Clamp

150637513
40.20.01.305: RNCC: 3 | RNVC: 2
93.30.50.32: RNCC: 5 | RNVC: 2

10 May 1983

5340-15-197-8965
Door Handle

151978965
0000500334999: RNCC: 3 | RNVC: 2
(241)A39630000500334999: RNCC: 5 | RNVC: 2

24 May 2004

5340-15-060-8026
Angle Bracket

150608026
000200198800: RNCC: 5 | RNVC: 2
000200198800: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-127-2857
Angle Bracket

151272857
698168: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-002-3095
Access Cover

150023095
504267266: RNCC: 3 | RNVC: 2

5 Aug 2013

5340-15-108-5688
Butt Hinge Leaf

151085688
93919446: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-111-7995
Angle Bracket

151117995
MF010228: RNCC: 3 | RNVC: 2

1 Jul 1990

5340-15-116-4784
Mending Plate

151164784
93809284: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-109-1823
Mending Plate

151091823
60102388: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-063-6473
Retaining Strap

150636473
1379757: RNCC: 3 | RNVC: 2
1379757: RNCC: 5 | RNVC: 9

13 Nov 1982

5340-15-117-8453
Retaining Strap

151178453
523119: RNCC: 3 | RNVC: 2
P009279956017000: RNCC: 5 | RNVC: 2

28 Jan 1994

5340-15-005-4423
Retaining Strap

150054423
1380035: RNCC: 3 | RNVC: 2
1380035: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-154-4039
Angle Bracket

151544039
A6120-91094-1: RNCC: 3 | RNVC: 2

22 May 2001

5340-15-001-8435
Mounting Bracket

150018435
500436149: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-152-8883
Loop Clamp

151528883
190516236: RNCC: 3 | RNVC: 2

7 Nov 2000

5340-15-154-3529
Mending Plate

151543529
107185961001: RNCC: 3 | RNVC: 2

8 May 2001

5340-15-003-5423
Angle Bracket

150035423
4552494: RNCC: 3 | RNVC: 2
4552494: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-106-6217
Clamping Catch

151066217
00766903: RNCC: 3 | RNVC: 2
766903: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-008-1812
Angle Bracket

150081812
60114295: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-059-4581
Handle Grip

150594581
10-60-30-00: RNCC: 3 | RNVC: 2

10 Apr 1975

5340-15-068-4877
Rod End Clevis

150684877
2881-19: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-100-8283
Retaining Strap

151008283
21610095A: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-161-0201
Coat And Hat Hook

151610201
F710110941: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-007-9681
Clip Retainer Plate

150079681
1-42429-11: RNCC: 3 | RNVC: 2
1-42429-11: RNCC: 5 | RNVC: 9

22 Sep 1979

5340-15-111-3788
Strap Hinge

151113788
113A6012-002: RNCC: 3 | RNVC: 2

7 Sep 1990

5340-15-005-4568
Handle Grip

150054568
1137-15-016: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-108-1406
Rod End Clevis

151081406
109-0625-07-1: RNCC: 3 | RNVC: 2

15 Jul 1987

5340-15-178-9240
Angle Bracket

151789240
TN122MD012AA00: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-15-001-5476
Access Cover

150015476
182719585: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-15-169-6740
Angle Bracket

151696740
F72017755: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-205-2314
Mounting Bracket

152052314
ICA-PLB 109S: RNCC: 3 | RNVC: 2
(241)AD830ICA-PLB109S: RNCC: 5 | RNVC: 2

28 Feb 2012

5340-15-113-0843
Retaining Strap

151130843
21367-001C1: RNCC: 3 | RNVC: 2
21367-001C01: RNCC: 5 | RNVC: 2

9 May 1991

5340-15-153-5218
Access Cover

151535218
142057204: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-122-0934
Screw Thread Insert

151220934
529N1010603: RNCC: 3 | RNVC: 2
529N1010603: RNCC: 5 | RNVC: 9

30 Apr 1996

5340-15-152-7930
Mounting Plate

151527930
P140801: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-189-2621
Metal Grille

151892621
ECS3I LB39: RNCC: 3 | RNVC: 2

10 Feb 2010

5340-15-071-1923
Handle Grip

150711923
1014G20: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-062-6469
Angle Bracket

150626469
A-110264-001: RNCC: 3 | RNVC: 2
A110264-001: RNCC: 5 | RNVC: 2

2 Sep 1982

5340-15-188-4314
Butt Hinge Leaf

151884314
79071105: RNCC: 3 | RNVC: 2

11 Sep 2009

5340-15-199-2596
Mounting Bracket

151992596
TAK-5155/01: RNCC: 3 | RNVC: 2
(241)A0069TAK-5155/01: RNCC: 5 | RNVC: 2

23 Feb 2005

5340-15-203-1769
Swivel Caster

152031769
M19P-001P001: RNCC: 3 | RNVC: 2

28 Nov 2007

5340-15-187-6816
Permanent Magnet

151876816
76046208: RNCC: 3 | RNVC: 2

24 Apr 2009

5340-15-118-3849
Loop Clamp

151183849
60161657: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-118-0750
Spring Holder

151180750
D0485487: RNCC: 3 | RNVC: 2

16 Dec 1994

5340-15-153-2576
Butt Hinge

151532576
122606316: RNCC: 2 | RNVC: 3

12 Dec 2000

5340-15-139-7061
Handle Grip

151397061
A.0010706: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-108-1671
Spring Holder

151081671
1576-18-205: RNCC: 3 | RNVC: 2
157618205: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-065-7023
Angle Bracket

150657023
85116-101: RNCC: 3 | RNVC: 2

15 May 1985

5340-15-203-1557
Latch Bar

152031557
212-1300-99-102: RNCC: 3 | RNVC: 2

27 Nov 2007

5340-15-059-0585
Plain Solid Disk

150590585
1276-18-119: RNCC: 3 | RNVC: 2
127618119: RNCC: 5 | RNVC: 2
1276-18-119-00-00: RNCC: 5 | RNVC: 2

26 Jun 1978

5340-15-061-3295
Rod End Clevis

150613295
JJ71206: RNCC: 3 | RNVC: 2

1 Dec 1977

5340-15-060-8051
Mending Plate

150608051
000200142400: RNCC: 5 | RNVC: 2
000200142400: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-177-4063
Mounting Plate

151774063
043363: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-008-1142
Screw Thread Insert

150081142
1009.066: RNCC: 3 | RNVC: 2

28 Jan 1981

5340-15-187-3110
Retaining Band

151873110
UZ192: RNCC: 3 | RNVC: 2
(241)A9410UZ192: RNCC: 5 | RNVC: 2

11 Mar 2009

5340-15-007-6268
Angle Bracket

150076268
P-135575-008: RNCC: 3 | RNVC: 2
P135575-008: RNCC: 5 | RNVC: 2

12 Mar 1980

5340-15-109-1798
Retaining Strap

151091798
1357151: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-122-1782
Access Cover

151221782
21005-01: RNCC: 3 | RNVC: 2
21005-01: RNCC: 3 | RNVC: 2

22 May 1997

5340-15-006-3096
Angle Bracket

150063096
15MW2003-1: RNCC: 5 | RNVC: 2
15MW2003-1: RNCC: 5 | RNVC: 2
15MW2003-1: RNCC: 5 | RNVC: 9
15MW2003-1: RNCC: 5 | RNVC: 9

24 Nov 1979

5340-15-113-1462
Rod End Clevis

151131462
277A1890-003: RNCC: 3 | RNVC: 2

7 Oct 1990

5340-15-089-5810
Butt Hinge

150895810
16950-150: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-115-8116
Angle Bracket

151158116
129-0760-80-101: RNCC: 3 | RNVC: 2

18 Jan 1993

5340-15-117-2514
Access Cover

151172514
58310E002004: RNCC: 3 | RNVC: 2
337736-P1: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-15-205-4096
Mending Plate

152054096
182707394: RNCC: 3 | RNVC: 2
(241)A0199182707394: RNCC: 5 | RNVC: 2

7 Mar 2012

5340-15-179-6886
Angle Bracket

151796886
0000500403959: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-064-6652
Angle Bracket

150646652
2-4751-101-40393-5: RNCC: 3 | RNVC: 2

30 Jul 1984

5340-15-116-1621
Retaining Strap

151161621
06594-101D00: RNCC: 3 | RNVC: 2

17 Mar 1993

5340-15-007-9499
Retaining Strap

150079499
4431333: RNCC: 3 | RNVC: 2
4431333: RNCC: 5 | RNVC: 9

22 Sep 1980

5340-15-155-5252
Door Handle

151555252
(241)A5015819.25.153: RNCC: 3 | RNVC: 2
819.25.153: RNCC: 3 | RNVC: 2

8 Apr 2002

5340-15-117-1973
Leather Strap

151171973
190509185: RNCC: 3 | RNVC: 2

2 Sep 1993

5340-15-102-1521
Mending Plate

151021521
8241-01-06: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-061-2482
Access Door Hinge

150612482
26276-102A1: RNCC: 3 | RNVC: 2
26276-102A01: RNCC: 5 | RNVC: 2

10 Oct 1977

5340-15-074-3988
Retaining Strap

150743988
26UNI2136: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-162-1728
Access Cover

151621728
291A10100-103: RNCC: 3 | RNVC: 2

3 Apr 2001

5340-15-120-3362
Access Cover

151203362
835175-10: RNCC: 3 | RNVC: 2
93159017: RNCC: 5 | RNVC: 2
835175-10: RNCC: 5 | RNVC: 9

30 Mar 1995

5340-15-179-9051
Mounting Plate

151799051
D1403826: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-121-9878
Angle Bracket

151219878
60177337: RNCC: 3 | RNVC: 2

4 Apr 1996

5340-15-113-4433
Butt Hinge Leaf

151134433
68-307116-004: RNCC: 3 | RNVC: 2

26 Aug 1991

5340-15-151-9472
Loop Clamp

151519472
00951406: RNCC: 3 | RNVC: 2
004800661: RNCC: 3 | RNVC: 2
(241)A39630-951406: RNCC: 5 | RNVC: 2
0-951406: RNCC: 5 | RNVC: 2
004800661: RNCC: 5 | RNVC: 2
1PA39630-951406: RNCC: 5 | RNVC: 2

26 Jul 2000

5340-15-103-1013
Loop Clamp

151031013
DE013.13.611: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-180-4612
Loop Clamp

151804612
42555485: RNCC: 3 | RNVC: 2
(241)A424942555485: RNCC: 5 | RNVC: 2

27 May 2008

5340-15-118-4020
Angle Bracket

151184020
60168888: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-207-4132
Loop Clamp

152074132
NS4F010-4: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-15-153-2536
Rod End Clevis

151532536
122605221: RNCC: 3 | RNVC: 2

12 Dec 2000

5340-15-195-2157
Bow Handle

151952157
343339601: RNCC: 3 | RNVC: 2
343339601: RNCC: 5 | RNVC: 2
CV173739: RNCC: 5 | RNVC: 2

7 Mar 2011

5340-15-109-1113
Mending Plate

151091113
11604A05-04: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-008-3748
Retaining Strap

150083748
4725178: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-148-3542
Angle Bracket

151483542
104653: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-116-4809
Angle Bracket

151164809
60166329: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-007-2898
Retaining Strap

150072898
1376-55-114: RNCC: 3 | RNVC: 2
137655114: RNCC: 5 | RNVC: 2

6 Jul 2000

5340-15-155-0523
Angle Bracket

151550523
J92440137-001: RNCC: 3 | RNVC: 2

9 Jan 2002

5340-15-109-0736
Clip Retainer Plate

151090736
11796-001: RNCC: 3 | RNVC: 2

18 Dec 1989

5340-15-066-4727
Plain Solid Disk

150664727
1127-31-131: RNCC: 3 | RNVC: 2
112731131: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-153-2742
Rod End Clevis

151532742
122649202: RNCC: 2 | RNVC: 3

12 Dec 2000

5340-15-137-7628
Butt Hinge

151377628
129-0370-18-111: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-139-4570
Angle Bracket

151394570
4749239: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-119-1667
Access Cover

151191667
75208372: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-007-7313
Plug Button

150077313
4636665: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-155-2949
Angle Bracket

151552949
60179797: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-15-120-7923
Recess Handle

151207923
F78.0277.00: RNCC: 3 | RNVC: 2

2 Aug 1995

5340-15-116-4797
Angle Bracket

151164797
60165506: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-052-0372
Loop Clamp

150520372
N0R2-505-05-10B: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-065-5144
Plain Solid Disk

150655144
1355-14-136: RNCC: 3 | RNVC: 2

9 Feb 1985

5340-15-179-6867
Mounting Bracket

151796867
0000098198369: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-149-3051
Mending Plate

151493051
4885481: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-187-1938
Retaining Band

151871938
MFP48.200: RNCC: 3 | RNVC: 2
(241)A3980MFP48.200: RNCC: 5 | RNVC: 2

24 Feb 2009

5340-15-118-3876
Webbing Strap

151183876
60168411: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-152-7850
Mounting Plate

151527850
P120505: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-152-0034
Angle Bracket

151520034
60122184: RNCC: 3 | RNVC: 2

31 Jul 2000

5340-15-157-9254
Plain Solid Disk

151579254
0-170961: RNCC: 3 | RNVC: 2
(241)A39630-170961: RNCC: 5 | RNVC: 2
1PA39630-170961: RNCC: 5 | RNVC: 2

25 Nov 2003

5340-15-120-9698
Loop Clamp

151209698
71038: RNCC: 3 | RNVC: 2
71038: RNCC: 5 | RNVC: 9

5 Sep 1995

5340-15-205-8942
Access Cover

152058942
BEL0017: RNCC: 3 | RNVC: 2
BEL0017: RNCC: 5 | RNVC: 2

12 Apr 2012

5340-15-060-6389
Mending Plate

150606389
22348-101: RNCC: 3 | RNVC: 2

29 Jun 1977

5340-15-205-4188
Retaining Strap

152054188
178904748: RNCC: 3 | RNVC: 2
(241)A0199178904748: RNCC: 5 | RNVC: 2

8 Mar 2012

5340-15-008-0750
Angle Bracket

150080750
60114294: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-118-8609
Access Cover

151188609
299709293B: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-061-4886
Door Handle

150614886
000200262150: RNCC: 5 | RNVC: 2
000200262150: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-122-0607
Mounting Bracket

151220607
201CA360-2TR: RNCC: 3 | RNVC: 2

23 Apr 1996

5340-15-102-3766
Coat And Hat Hook

151023766
140-3001-021: RNCC: 3 | RNVC: 2

26 Dec 1987

5340-15-179-6929
Mounting Bracket

151796929
8143556: RNCC: 3 | RNVC: 2
(241)A42498143556: RNCC: 5 | RNVC: 2

7 Jun 2007

5340-15-117-9095
Butt Hinge Leaf

151179095
214A2028-015: RNCC: 3 | RNVC: 2

31 Jan 1994

5340-15-100-6835
Rod End Clevis

151006835
W000779: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-179-8973
Access Cover

151798973
D1404681: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-178-9209
Retaining Band

151789209
SG012MD002AA00: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-15-155-3043
Angle Bracket

151553043
60185336: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-15-108-7541
Spring Tension Clip

151087541
1127-19-795: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-100-3162
Retaining Strap

151003162
8448710410: RNCC: 3 | RNVC: 2

19 May 1994

5340-15-109-7121
Spring Tension Clip

151097121
14202383: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-109-1830
Mending Plate

151091830
60135013: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-203-6747
Mounting Plate

152036747
178-00005: RNCC: 3 | RNVC: 2

24 Jun 2011

5340-15-120-4496
Retaining Strap

151204496
142507301: RNCC: 3 | RNVC: 2

25 May 1995

5340-15-156-2584
Expansion Plug

151562584
055010: RNCC: 3 | RNVC: 2
(241)A9772055010: RNCC: 5 | RNVC: 2

19 Dec 2002

5340-15-154-0210
Loop Clamp

151540210
73208M069002: RNCC: 5 | RNVC: 2
73208M069002: RNCC: 5 | RNVC: 9

15 Mar 2001

5340-15-003-3550
Lock-Release Lever

150033550
9284845: RNCC: 3 | RNVC: 2

4 Nov 2013

5340-15-202-8406
Mounting Bracket

152028406
9.3040.0371.A: RNCC: 3 | RNVC: 2
(241)A92169.3040.0371.A: RNCC: 5 | RNVC: 2

23 Jul 2007

5340-15-177-3951
Mounting Bracket

151773951
037545: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-001-7876
Mounting Bracket

150017876
5949779058: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-008-7286
Retaining Strap

150087286
1127-80-116: RNCC: 3 | RNVC: 2
112780116: RNCC: 5 | RNVC: 2

1 Jun 1987

5340-15-110-5185
Shelf Bracket

151105185
SF260-13-22-11: RNCC: 3 | RNVC: 2
SF260-13-22-11: RNCC: 5 | RNVC: 9

7 Sep 1989

5340-15-100-2544
Butt Hinge Leaf

151002544
39A1152-05-02: RNCC: 3 | RNVC: 2

6 Dec 1986

5340-15-005-1079
Mending Plate

150051079
1137-05-147: RNCC: 3 | RNVC: 2

5 Apr 1978

5340-15-107-5145
Expansion Plug

151075145
8586592: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-118-9888
Access Cover

151189888
75207967: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-064-5876
Bow Handle

150645876
1394120: RNCC: 3 | RNVC: 2

17 Nov 1983

5340-15-117-7055
Retaining Strap

151177055
D9103026P: RNCC: 3 | RNVC: 2
D9103026P: RNCC: 5 | RNVC: 9

10 Jan 1995

5340-15-074-3965
Retaining Strap

150743965
28UNI2134CD: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-111-8709
Threaded Rod End

151118709
232A4701-403: RNCC: 3 | RNVC: 2

15 Jan 1991

5340-15-104-4357
Expansion Plug

151044357
8818075: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-113-2381
Handle Grip

151132381
244A1222-403: RNCC: 3 | RNVC: 2

11 Apr 1991

5340-15-050-9756
Rod End Clevis

150509756
4-3351-201-41865-5: RNCC: 3 | RNVC: 2
4-3351-2-01-41865-5: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-114-2567
Handle Grip

151142567
8546225: RNCC: 3 | RNVC: 2

26 May 1992

5340-15-108-9561
Angle Bracket

151089561
67300500: RNCC: 3 | RNVC: 2

25 May 1989

5340-15-113-8011
Retaining Strap

151138011
1111-08-005: RNCC: 3 | RNVC: 2

27 Feb 1992

5340-15-207-0814
Threaded Rod End

152070814
109-0134-06-111: RNCC: 3 | RNVC: 2

3 Sep 2012

5340-15-111-3799
Strap Hinge

151113799
113A6031-002: RNCC: 3 | RNVC: 2

7 Sep 1990

5340-15-107-2327
Access Door Hinge

151072327
26893-101: RNCC: 3 | RNVC: 2

22 Mar 1988

5340-15-117-5336
Filler Opening Cap

151175336
200363841: RNCC: 3 | RNVC: 2

9 Nov 1993

5340-15-003-1034
Angle Bracket

150031034
743604: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-040-2896
Angle Bracket

150402896
3-4665-101-22726: RNCC: 3 | RNVC: 2
3-4665-1-01-22726: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-168-9449
Coat And Hat Hook

151689449
F72001828: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-007-9521
Screw Thread Insert

150079521
4435721: RNCC: 3 | RNVC: 2
4435721: RNCC: 5 | RNVC: 9

22 Sep 1979

5340-15-118-2044
Screw Thread Insert

151182044
13582671: RNCC: 3 | RNVC: 2

22 Apr 1994

5340-15-198-7855
Mounting Plate

151987855
4789120: RNCC: 3 | RNVC: 2

17 Nov 2004

5340-15-068-6020
Loop Clamp

150686020
ART. 5048: RNCC: 3 | RNVC: 2

3 May 1983

5340-15-150-8869
Mounting Bracket

151508869
00088183: RNCC: 3 | RNVC: 2

3 Feb 2000

5340-15-178-2410
Mounting Bracket

151782410
6429.105: RNCC: 3 | RNVC: 2

11 Mar 2005

5340-15-207-1749
Retaining Band

152071749
69R018P006: RNCC: 3 | RNVC: 2
(241)A091269R018P006: RNCC: 5 | RNVC: 2

17 Sep 2012

5340-15-116-4848
Clamping Catch

151164848
60165652: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-118-9171
Mending Plate

151189171
73144798: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-074-3938
Retaining Strap

150743938
B20UNAV1046A37UN1743CD: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-180-4640
Control Rod

151804640
20265836: RNCC: 3 | RNVC: 2
(241)A424942556714: RNCC: 5 | RNVC: 2
42556714: RNCC: 5 | RNVC: 2

27 May 2008

5340-15-162-4293
Angle Bracket

151624293
D7441.0001: RNCC: 5 | RNVC: 2
D7441.0001: RNCC: 5 | RNVC: 9

25 Sep 2001

5340-15-105-8481
Bow Handle

151058481
4601246: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-059-4582
Handle Grip

150594582
10-60-35-00: RNCC: 3 | RNVC: 2

10 Apr 1975

5340-15-116-0551
Mending Plate

151160551
1P 241576: RNCC: 3 | RNVC: 2
1P 241576: RNCC: 5 | RNVC: 9

15 Dec 1993

5340-15-103-7784
Retaining Strap

151037784
12776: RNCC: 3 | RNVC: 2
1PA396312776: RNCC: 5 | RNVC: 2

8 Mar 1988

5340-15-009-1889
Angle Bracket

150091889
109-0600-52-1: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-045-3707
Loop Clamp

150453707
751-12-96: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-202-3528
Retaining Band

152023528
504118527: RNCC: 3 | RNVC: 2
(241)A4249504118527: RNCC: 5 | RNVC: 2

28 Feb 2007

5340-15-113-8546
Retaining Strap

151138546
1P 537974: RNCC: 3 | RNVC: 2
1P 537974: RNCC: 5 | RNVC: 9

13 Jun 1994

5340-15-204-9697
Loop Clamp

152049697
A071A030NB: RNCC: 3 | RNVC: 2

3 Feb 2012

5340-15-064-5893
Loop Clamp

150645893
4644288: RNCC: 3 | RNVC: 2
(241)A31144644288: RNCC: 5 | RNVC: 2
4644288: RNCC: 5 | RNVC: 2

17 Nov 1983

5340-15-178-0606
Loop Clamp

151780606
3630.128: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-15-179-7017
Mounting Bracket

151797017
00183552: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-007-2507
Loop Clamp

150072507
1372154: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-105-8965
Spring Tension Clip

151058965
2.4639.060.2: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-045-3569
Retaining Strap

150453569
740-20-17: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-179-4858
Rod End Connector

151794858
1P 551672: RNCC: 3 | RNVC: 2
1P 551672: RNCC: 5 | RNVC: 9

22 Jan 2007

5340-15-003-1440
Bridge Clamp

150031440
5949791243: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-005-5297
Retaining Strap

150055297
1026-04-162: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-116-4950
Loop Clamp

151164950
10442290: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-119-1049
Expansion Plug

151191049
70933411: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-119-1394
Angle Bracket

151191394
73125246: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-118-7016
Access Cover

151187016
73128795: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-057-4203
Mending Plate

150574203
C241037C: RNCC: 5 | RNVC: 2
C241037C: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-063-5960
Retaining Strap

150635960
5941002: RNCC: 3 | RNVC: 2
5941002: RNCC: 5 | RNVC: 9

13 Nov 1982

5340-15-178-2852
Access Cover

151782852
8.609.105: RNCC: 3 | RNVC: 2

29 Apr 2005

5340-15-118-4585
Loop Clamp

151184585
60152861: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-122-2206
Mounting Bracket

151222206
800068339: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-149-9113
Mounting Bracket

151499113
00085508: RNCC: 3 | RNVC: 2

25 Jun 1999

5340-15-065-4360
Butt Hinge Leaf

150654360
204-1510-01-14: RNCC: 3 | RNVC: 2

9 Dec 1984

5340-15-177-4035
Bridge Clamp

151774035
042304: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-111-9305
Retaining Strap

151119305
60102849: RNCC: 3 | RNVC: 2

10 Sep 1989

5340-15-118-4496
Angle Bracket

151184496
60154196: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-188-2684
Access Cover

151882684
1111340P01-00: RNCC: 3 | RNVC: 2

1 Sep 2009

5340-15-067-9295
Retaining Strap

150679295
24124-002: RNCC: 3 | RNVC: 2

19 Feb 1986

5340-15-002-8707
Expansion Shield

150028707
500142: RNCC: 3 | RNVC: 2

14 Oct 2013

5340-15-108-6265
Retaining Strap

151086265
7303403: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-004-7671
Retaining Strap

150047671
68156-101: RNCC: 3 | RNVC: 2

10 Apr 1978

5340-15-060-1546
Butt Hinge Leaf

150601546
1376-31-164: RNCC: 3 | RNVC: 2
137631164: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-064-7253
Loop Clamp

150647253
10441390: RNCC: 3 | RNVC: 2

17 Nov 1983

5340-15-002-1375
Mounting Bracket

150021375
5801508595: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-177-3521
Mounting Bracket

151773521
028910: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-122-3295
Butt Hinge Leaf

151223295
212A7105-002: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-089-6277
Retaining Strap

150896277
26-6-20-30: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-178-6400
Loop Clamp

151786400
2PPP013722: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-188-9467
Mounting Bracket

151889467
VA0103.00086: RNCC: 3 | RNVC: 2
(241)AH375VA0103.00086: RNCC: 5 | RNVC: 2

29 Dec 2009

5340-15-192-5080
Mounting Bracket

151925080
93932107: RNCC: 3 | RNVC: 2
(241)A424993932107: RNCC: 5 | RNVC: 2

23 Mar 2010

5340-15-189-2270
Mounting Bracket

151892270
609049: RNCC: 3 | RNVC: 2

9 Feb 2010

5340-15-058-8883
Loop Clamp

150588883
181A3: RNCC: 5 | RNVC: 2
181A3: RNCC: 5 | RNVC: 9

30 Dec 1974

5340-15-062-9057
Retaining Strap

150629057
0-55594: RNCC: 3 | RNVC: 2

9 Jul 1981

5340-15-062-9144
Loop Clamp

150629144
0-100204: RNCC: 3 | RNVC: 2

28 Aug 1981

5340-15-179-9577
Mounting Bracket

151799577
00184096: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-111-9253
Angle Bracket

151119253
60110613: RNCC: 3 | RNVC: 2

10 Sep 1989

5340-15-108-3117
Angle Bracket

151083117
60129723: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-064-5894
Angle Bracket

150645894
60113093: RNCC: 3 | RNVC: 2

17 Nov 1983

5340-15-170-4228
Access Cover

151704228
60169280: RNCC: 3 | RNVC: 2

16 Jan 2003

5340-15-120-2953
Angle Bracket

151202953
60151880: RNCC: 3 | RNVC: 2

13 Mar 1995

5340-15-120-4446
Mending Plate

151204446
142520926: RNCC: 3 | RNVC: 2

25 May 1995

5340-15-193-1493
Control Rod

151931493
504127405: RNCC: 3 | RNVC: 2
(241)A4249504127405: RNCC: 5 | RNVC: 2

20 Apr 2010

5340-15-119-0119
Retaining Band

151190119
70196765: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-068-3433
Door Handle

150683433
RS 300 827-R: RNCC: 3 | RNVC: 2

27 Oct 1984

5340-15-122-3551
Mounting Bracket

151223551
D1408890: RNCC: 3 | RNVC: 2

8 Jun 2000

5340-15-007-2226
Loop Clamp

150072226
1398374: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-108-5121
Strap Hinge

151085121
82188: RNCC: 3 | RNVC: 2
4696896: RNCC: 5 | RNVC: 2
04696896: RNCC: 5 | RNVC: 2

14 Jun 1988

5340-15-118-1953
Loop Clamp

151181953
14560387: RNCC: 3 | RNVC: 2

22 Apr 1994

5340-15-178-7562
Mounting Bracket

151787562
037570: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-005-0463
Angle Bracket

150050463
0-33097: RNCC: 3 | RNVC: 2

7 Sep 1977

5340-15-115-6119
Roller Holder

151156119
D0470480: RNCC: 3 | RNVC: 2

24 Mar 1994

5340-15-003-1292
Snap Hook

150031292
T.S.PD.DOP: RNCC: 3 | RNVC: 2
(241)AJ720T.S.PD.DOP: RNCC: 5 | RNVC: 2

28 Oct 2013

5340-15-149-3456
Mounting Plate

151493456
E6357.0000: RNCC: 5 | RNVC: 2
E6357.0000: RNCC: 5 | RNVC: 9

19 Feb 1999

5340-15-003-8911
Access Cover

150038911
182714148: RNCC: 3 | RNVC: 2
(241)A0199182714148: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-160-3505
Coat And Hat Hook

151603505
F720117511: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-203-4547
Turnbuckle

152034547
N632U1044101: RNCC: 3 | RNVC: 2

4 Feb 2008

5340-15-194-7025
Lock Key

151947025
R12496000: RNCC: 3 | RNVC: 2

29 Dec 2010

5340-15-180-1801
Access Cover

151801801
187.07.005: RNCC: 3 | RNVC: 2

15 Feb 2008

5340-15-151-9995
Angle Bracket

151519995
60125597: RNCC: 3 | RNVC: 2

31 Jul 2000

5340-15-153-5225
Access Cover

151535225
142058152: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-122-5944
Mounting Bracket

151225944
49806-001: RNCC: 5 | RNVC: 2
49806-001: RNCC: 5 | RNVC: 9
49806-001: RNCC: 5 | RNVC: 9

10 Sep 1996

5340-15-206-7960
Access Cover

152067960
42102431: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-203-5776
Metal Grille

152035776
120021501: RNCC: 3 | RNVC: 2
(241)A5009120021501: RNCC: 5 | RNVC: 2

14 Jun 2011

5340-15-074-4006
Retaining Strap

150744006
14UNI2138: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-109-1226
Retaining Strap

151091226
60115186: RNCC: 3 | RNVC: 2

30 Apr 1988

5340-15-205-2619
Access Cover

152052619
504379594: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-155-9288
Loop Clamp

151559288
60149645: RNCC: 3 | RNVC: 2

7 Oct 2002

5340-15-007-2228
Retaining Strap

150072228
1398414: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-201-0946
Retaining Band

152010946
5201A051: RNCC: 3 | RNVC: 2
(241)A08105201A051: RNCC: 5 | RNVC: 2

28 May 2006

5340-15-066-0390
Retaining Strap

150660390
1127-44-703: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-112-8465
Vent Plug

151128465
467665: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-045-2929
Loop Clamp

150452929
N0R2-505-06-16A: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-119-1399
Bow Handle

151191399
73125367: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-120-0866
Angle Bracket

151200866
330171756: RNCC: 3 | RNVC: 2
93190067: RNCC: 5 | RNVC: 2

19 Dec 1994

5340-15-118-7350
Angle Bracket

151187350
73126571: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-119-0572
Expansion Plug

151190572
70921376: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-205-4193
Retaining Strap

152054193
178904755: RNCC: 3 | RNVC: 2
(241)A0199178904755: RNCC: 5 | RNVC: 2

8 Mar 2012

5340-15-063-6003
Loop Clamp

150636003
12180890: RNCC: 3 | RNVC: 2
12180890: RNCC: 5 | RNVC: 9

13 Nov 1982

5340-15-155-4873
Mounting Bracket

151554873
CBD71189P05: RNCC: 3 | RNVC: 2

27 Mar 2002

5340-15-002-3108
Mounting Bracket

150023108
504376997: RNCC: 3 | RNVC: 2

6 Aug 2013

5340-15-103-0184
Strap Hinge

151030184
79031971: RNCC: 3 | RNVC: 2

21 Jun 1987

5340-15-152-3522
Loop Clamp

151523522
0-166968: RNCC: 3 | RNVC: 2

4 Sep 2000

5340-15-108-5234
Loop Clamp

151085234
12173690: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-189-2661
Access Cover

151892661
391400122: RNCC: 3 | RNVC: 2
0391400122: RNCC: 5 | RNVC: 2

10 Feb 2010

5340-15-121-0634
Access Cover

151210634
142520258: RNCC: 3 | RNVC: 2

21 Sep 1995

5340-15-179-6758
Mounting Plate

151796758
0000500408463: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-105-8484
Bow Handle

151058484
24037: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-073-5269
Flush Lock

150735269
75-70X63: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-178-4004
Mounting Plate

151784004
154921-1: RNCC: 3 | RNVC: 2

31 May 2005

5340-15-057-1284
Loop Clamp

150571284
2-1575-201-99180: RNCC: 3 | RNVC: 2

22 Nov 1972

5340-15-004-7793
Loop Clamp

150047793
0-06702: RNCC: 3 | RNVC: 2

7 Sep 1977

5340-15-200-3894
Stand Base

152003894
ETBASERI08: RNCC: 3 | RNVC: 2

11 Jan 2006

5340-15-114-4426
Mending Plate

151144426
60159540: RNCC: 3 | RNVC: 2

12 Jun 1992

5340-15-205-1064
Access Cover

152051064
OB475P01: RNCC: 3 | RNVC: 2

21 Feb 2012

5340-15-002-5266
Control Rod

150025266
42561775: RNCC: 3 | RNVC: 2

2 Sep 2013

5340-15-152-2002
Loop Clamp

151522002
17314490: RNCC: 3 | RNVC: 2

9 Aug 2000

5340-15-149-9554
Mounting Bracket

151499554
00081936: RNCC: 3 | RNVC: 2

28 Jun 1999

5340-15-102-4516
Rod End Clevis

151024516
263A1041-001: RNCC: 3 | RNVC: 2

30 Aug 1988

5340-15-153-5199
Access Cover

151535199
142025185: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-178-5488
Mounting Plate

151785488
2231.060.0003: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-162-2095
Furniture Glide

151622095
017PIEREG35: RNCC: 3 | RNVC: 2

17 May 2001

5340-15-153-5233
Access Cover

151535233
142065103: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-204-0923
Padlock

152040923
AS-LHT30: RNCC: 3 | RNVC: 2
(241)AF517AS-LHT30: RNCC: 5 | RNVC: 2

5 Sep 2011

5340-15-007-1878
Retaining Strap

150071878
1389185: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-204-8854
Retaining Band

152048854
L66522142: RNCC: 3 | RNVC: 2
(241)A0302L66522142: RNCC: 5 | RNVC: 2

23 Jan 2012

5340-15-205-3030
Control Rod

152053030
112744221: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-187-2046
Mounting Bracket

151872046
SC 100 672: RNCC: 3 | RNVC: 2
(241)A3980SC100672: RNCC: 5 | RNVC: 2

24 Feb 2009

5340-15-152-1029
Loop Clamp

151521029
60139410: RNCC: 3 | RNVC: 2

7 Aug 2000

5340-15-001-1429
Mounting Bracket

150011429
0.007.3565.2: RNCC: 3 | RNVC: 2

31 May 2013

5340-15-152-2478
Mounting Bracket

151522478
D22 D367 00P: RNCC: 3 | RNVC: 2

17 Aug 2000

5340-15-051-5085
Retaining Strap

150515085
T2I48C: RNCC: 3 | RNVC: 2

16 Sep 1980

5340-15-121-3125
Mounting Plate

151213125
28033-41: RNCC: 3 | RNVC: 2
28033-41: RNCC: 5 | RNVC: 9

7 Nov 1995

5340-15-118-8572
Angle Bracket

151188572
241202177X: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-205-2640
Latch Bar

152052640
D1-27023-401: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-148-5213
Hook Handle

151485213
98473897: RNCC: 3 | RNVC: 2

13 Aug 1999

5340-15-009-6378
Mending Plate

150096378
159281P1: RNCC: 3 | RNVC: 2

17 Oct 1980

5340-15-118-3414
Loop Clamp

151183414
60143780: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-119-8001
Mounting Plate

151198001
109-0518-04-117: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-193-8894
Utility Access Door

151938894
153134168: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-15-001-5906
Mounting Bracket

150015906
504374969: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-177-3681
Loop Clamp

151773681
017223: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-073-8919
Flush Lock

150738919
13B65X60-3LEVE: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-147-7112
Retaining Clip

151477112
SFDIA16: RNCC: 3 | RNVC: 2
53C010P003: RNCC: 5 | RNVC: 2

4 Mar 1998

5340-15-156-2647
Loop Clamp

151562647
0550151: RNCC: 3 | RNVC: 2
(241)A97720550151: RNCC: 5 | RNVC: 2

20 Dec 2002

5340-15-178-9903
T Bracket

151789903
RS 302 653: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-000-7268
Retaining Strap

150007268
BRP-0322654: RNCC: 3 | RNVC: 2

3 Apr 2013

5340-15-107-5144
Expansion Plug

151075144
14282870: RNCC: 3 | RNVC: 2
A040015-012: RNCC: 5 | RNVC: 2

30 Mar 1988

5340-15-187-6210
Retaining Clip

151876210
BL/PC: RNCC: 3 | RNVC: 2
(241)AH405BL/PC: RNCC: 5 | RNVC: 2

15 Apr 2009

5340-15-113-2900
Angle Bracket

151132900
1Z 591156: RNCC: 3 | RNVC: 2
1Z 591156: RNCC: 5 | RNVC: 9

3 Dec 1993

5340-15-118-8027
Access Cover

151188027
564530: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-074-3948
Retaining Strap

150743948
C20UNAV1046A37UN1743CD: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-045-2054
Butt Hinge Leaf

150452054
3200-28: RNCC: 3 | RNVC: 2
9AA3020A043-001: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-089-1294
Retaining Strap

150891294
6132659: RNCC: 3 | RNVC: 2
6132659: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-109-1836
Angle Bracket

151091836
1390486: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-195-5433
Mounting Plate

151955433
095683207: RNCC: 3 | RNVC: 2
095683207: RNCC: 3 | RNVC: 2
(241)AB518095683207: RNCC: 5 | RNVC: 2

4 Apr 2011

5340-15-116-4829
Angle Bracket

151164829
93914909: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-118-6640
Flush Catch

151186640
75222182: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-207-3972
Loop Clamp

152073972
8588943: RNCC: 3 | RNVC: 2
0052835: RNCC: 5 | RNVC: 2
0052835: RNCC: 5 | RNVC: 2

10 Oct 2012

5340-15-178-7546
Mounting Bracket

151787546
026924: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-110-7948
Retaining Strap

151107948
08291-101A00: RNCC: 3 | RNVC: 2
08291-101: RNCC: 5 | RNVC: 2

22 Jul 1990

5340-15-118-3417
Loop Clamp

151183417
60142933: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-153-2901
Butt Hinge

151532901
122505609: RNCC: 2 | RNVC: 3

13 Dec 2000

5340-15-006-2958
Retaining Strap

150062958
1-45676-80: RNCC: 3 | RNVC: 2
1-45676-80: RNCC: 5 | RNVC: 9

29 Jun 1979

5340-15-000-4360
Loop Clamp

150004360
425101202009: RNCC: 3 | RNVC: 2

1 Mar 2013

5340-15-105-8963
Spring Tension Clip

151058963
002.2964.0: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-001-8285
Mounting Bracket

150018285
5949784969: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-008-1421
Angle Bracket

150081421
0-34125: RNCC: 3 | RNVC: 2

9 Jun 1981

5340-15-063-5074
Strap Hinge

150635074
60109198: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-068-4342
Spring Tension Clip

150684342
RS 402 365 B: RNCC: 3 | RNVC: 2

27 Oct 1984

5340-15-119-0760
Loop Clamp

151190760
70927264: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-073-8920
Flush Lock

150738920
13B65X70-3LEVE: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-064-7131
Retaining Band

150647131
01-245-E-S05: RNCC: 3 | RNVC: 2

24 Jun 1984

5340-15-199-0087
Mounting Bracket

151990087
W111789A1: RNCC: 3 | RNVC: 2
(241)A5798W111789A1: RNCC: 5 | RNVC: 2

2 Jan 2005

5340-15-005-0433
Angle Bracket

150050433
0-33268: RNCC: 3 | RNVC: 2

7 Sep 1977

5340-15-107-2520
Mending Plate

151072520
3424-20: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-179-7755
Clip Retainer Plate

151797755
J57151844-003: RNCC: 3 | RNVC: 2

3 Aug 2007

5340-15-059-3536
Retaining Strap

150593536
1127-40-327: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-115-5342
Handle Grip

151155342
D0471758: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-109-1803
Retaining Strap

151091803
1394543: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-120-3547
Angle Bracket

151203547
60175066: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-119-1312
Access Cover

151191312
73123586: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-149-1189
Angle Bracket

151491189
60188874: RNCC: 3 | RNVC: 2

2 Dec 1998

5340-15-153-9059
Mounting Bracket

151539059
9426T9: RNCC: 3 | RNVC: 2
(241)A333400084269: RNCC: 4 | RNVC: 1
00084269: RNCC: 5 | RNVC: 2

9 Mar 2001

5340-15-163-3905
Loop Clamp

151633905
95351322: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-119-8080
Loop Clamp

151198080
800071578: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-162-4223
Access Cover

151624223
150755-1: RNCC: 3 | RNVC: 2

25 Sep 2001

5340-15-062-4329
Plug Button

150624329
0-31509: RNCC: 3 | RNVC: 2

19 Jun 1982

5340-15-115-4784
Catch Strike

151154784
260-11-34-11: RNCC: 3 | RNVC: 2
260-11-34-11: RNCC: 5 | RNVC: 9

29 Nov 1992

5340-15-179-9535
Mounting Bracket

151799535
0000500401317: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-063-9799
Lock-Release Lever

150639799
3908.3089: RNCC: 3 | RNVC: 2

7 Sep 1983

5340-15-178-8081
Loop Clamp

151788081
82.04: RNCC: 3 | RNVC: 2

15 Dec 2005

5340-15-196-8415
Barrel Bolt

151968415
PN UAS 00047208: RNCC: 3 | RNVC: 2
5340F76037949: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-058-7143
Retaining Strap

150587143
206-052-105-1001: RNCC: 3 | RNVC: 2

26 Mar 1975

5340-15-050-3512
Rod End Clevis

150503512
6-3149-301-44989: RNCC: 3 | RNVC: 2
6-3149-3-01-44989: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-149-3137
Angle Bracket

151493137
4886051: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-106-9676
Angle Bracket

151069676
8984055: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-009-1394
Angle Bracket

150091394
1388344: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-059-1969
Angle Bracket

150591969
T20459-3: RNCC: 3 | RNVC: 2

19 Jun 1974

5340-15-189-1407
Loop Clamp

151891407
60172101: RNCC: 3 | RNVC: 2
(241)A424960172101: RNCC: 5 | RNVC: 2

28 Jan 2010

5340-15-109-3735
Mending Plate

151093735
5137-294-09: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-202-2792
Loop Clamp

152022792
18087992: RNCC: 3 | RNVC: 2
(241)A424918087992: RNCC: 5 | RNVC: 2

19 Feb 2007

5340-15-204-1142
Threaded Rod End

152041142
0.96916.50.0: RNCC: 3 | RNVC: 2

6 Sep 2011

5340-15-203-8468
Mounting Bracket

152038468
COLCA0006: RNCC: 3 | RNVC: 2
(241)A4114COLCA0006: RNCC: 5 | RNVC: 2

7 Jul 2011

5340-15-163-8366
Angle Bracket

151638366
4752450: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-120-4498
Retaining Strap

151204498
142502483: RNCC: 3 | RNVC: 2

25 May 1995

5340-15-189-2637
Metal Grille

151892637
390700010: RNCC: 3 | RNVC: 2
0390700010: RNCC: 5 | RNVC: 2

10 Feb 2010

5340-15-154-2058
Mending Plate

151542058
0-168712: RNCC: 3 | RNVC: 2
(241)A39630-168712: RNCC: 5 | RNVC: 2
1PA39630-168712: RNCC: 5 | RNVC: 2

28 Mar 2001

5340-15-186-8403
Blank Panel

151868403
357196-001: RNCC: 3 | RNVC: 2

5 Jan 2009

5340-15-199-1968
Rod End Clevis

151991968
W003700049: RNCC: 3 | RNVC: 2

6 Feb 2005

5340-15-198-6351
Metal Grille

151986351
2103.1011: RNCC: 3 | RNVC: 2
W111137P1: RNCC: 5 | RNVC: 2
(241)A49782103.1011: RNCC: 5 | RNVC: 2

22 Oct 2004

5340-15-202-5595
Angle Bracket

152025595
N635G1083201: RNCC: 3 | RNVC: 2
(241)A0126N635G1083201: RNCC: 5 | RNVC: 2

8 May 2007

5340-15-064-3727
Plug Button

150643727
885610: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-181-0488
Control Rod

151810488
60186421: RNCC: 3 | RNVC: 2
(241)A424960186421: RNCC: 5 | RNVC: 2

8 Oct 2008

5340-15-201-2941
Stand Base

152012941
162530265: RNCC: 3 | RNVC: 2

20 Jul 2006

5340-15-008-0560
Loop Clamp

150080560
60113191: RNCC: 3 | RNVC: 2
(241)A424960113191: RNCC: 5 | RNVC: 2

27 Mar 1981

5340-15-195-8501
Mounting Bracket

151958501
51891: RNCC: 3 | RNVC: 2
(241)AJ61151891: RNCC: 5 | RNVC: 2

23 May 2011

5340-15-206-8478
Mounting Bracket

152068478
9817 6973: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-187-2030
Mounting Bracket

151872030
SC 100 657: RNCC: 3 | RNVC: 2
(241)A3980SC100657: RNCC: 5 | RNVC: 2

24 Feb 2009

5340-15-195-8549
Mounting Bracket

151958549
A9067600428: RNCC: 3 | RNVC: 2
(241)AJ611A9067600428: RNCC: 5 | RNVC: 2

23 May 2011

5340-15-202-9718
Mounting Bracket

152029718
C7258W27B1: RNCC: 3 | RNVC: 2
(241)A0069C7258W27B1: RNCC: 5 | RNVC: 2

14 Oct 2007

5340-15-004-3878
Loop Clamp

150043878
0-21569: RNCC: 3 | RNVC: 2

7 Sep 1978

5340-15-103-8708
Angle Bracket

151038708
60114982: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-102-0785
Butt Hinge

151020785
213A7081-401: RNCC: 3 | RNVC: 2

29 Jul 1988

5340-15-147-0809
Mounting Plate

151470809
51250: RNCC: 3 | RNVC: 2

21 Aug 1997

5340-15-119-0538
Expansion Plug

151190538
70920558: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-061-3734
Angle Bracket

150613734
P36HB29: RNCC: 5 | RNVC: 2
P36HB29: RNCC: 5 | RNVC: 9

22 Sep 1977

5340-15-065-8699
Hand Crank

150658699
RM691-033: RNCC: 3 | RNVC: 2
RM691-033: RNCC: 5 | RNVC: 9
RM691-033: RNCC: 5 | RNVC: 9

24 Jul 1985

5340-15-105-8967
Spring Tension Clip

151058967
10124875: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-150-3738
Screw Thread Insert

151503738
26T042P006: RNCC: 5 | RNVC: 2
26T042P006: RNCC: 5 | RNVC: 9

6 Oct 1999

5340-15-074-3942
Retaining Strap

150743942
C8UNAV1046A37UNI743CD: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-054-4212
Retaining Ring

150544212
945600K: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-150-0944
Loop Clamp

151500944
044080019: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-153-6886
Loop Clamp

151536886
142068038: RNCC: 3 | RNVC: 2

20 Feb 2001

5340-15-193-8823
Shelf Bracket

151938823
1093001008: RNCC: 3 | RNVC: 2
(241)AF2201093001008: RNCC: 5 | RNVC: 2

21 Jul 2010

5340-15-108-7609
Angle Bracket

151087609
60136119: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-145-1481
Screw Thread Insert

151451481
01320250005: RNCC: 3 | RNVC: 2

19 May 1997

5340-15-187-8211
Mounting Bracket

151878211
018.066.00.45: RNCC: 3 | RNVC: 2
018.066.00.45: RNCC: 5 | RNVC: 2
(241)A6479018.066.00.45: RNCC: 5 | RNVC: 2

7 May 2009

5340-15-152-7839
Retaining Strap

151527839
P110512: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-119-7151
Angle Bracket

151197151
60173358: RNCC: 3 | RNVC: 2

8 Nov 1994

5340-15-200-9758
Handle Grip

152009758
IT PR1: RNCC: 3 | RNVC: 2
(241)AC108IT PR1: RNCC: 5 | RNVC: 2

25 Apr 2006

5340-15-204-3295
Mounting Bracket

152043295
0000500428654: RNCC: 3 | RNVC: 2
(241)A39630000500428654: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-124-7505
Angle Bracket

151247505
8575870: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-073-5237
Rim Lock

150735237
1756PART6: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-152-7837
Mounting Bracket

151527837
P110501: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-120-3524
Mending Plate

151203524
60177293: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-170-6437
Plain Solid Disk

151706437
4-91593.0000//D: RNCC: 3 | RNVC: 2
(241)A00694-91593.0000//D: RNCC: 5 | RNVC: 2

28 Apr 2003

5340-15-206-0682
Retaining Band

152060682
L65891518: RNCC: 3 | RNVC: 2
(241)A0302L65891518: RNCC: 5 | RNVC: 2

14 May 2012

5340-15-169-5488
Coat And Hat Hook

151695488
F72015001: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-168-9054
Coat And Hat Hook

151689054
F71011094: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-002-5440
Access Cover

150025440
16100014413: RNCC: 3 | RNVC: 2

3 Sep 2013

5340-15-179-9906
Metal Grille

151799906
9000329: RNCC: 3 | RNVC: 2

16 Nov 2007

5340-15-193-8665
Expansion Plug

151938665
42N-04-11220: RNCC: 3 | RNVC: 2
(241)AH72442N-04-11220: RNCC: 5 | RNVC: 2

21 Jul 2010

5340-15-147-3847
Access Cover

151473847
3534-56: RNCC: 3 | RNVC: 2
3534-56: RNCC: 5 | RNVC: 9

31 Oct 1997

5340-15-177-3966
Mounting Plate

151773966
039258: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-065-4341
Mending Plate

150654341
1376-18-731: RNCC: 3 | RNVC: 2
137618731: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-203-8581
Door Handle

152038581
OMP-MLM-019: RNCC: 3 | RNVC: 2
(241)AE591OMP-MLM-019: RNCC: 5 | RNVC: 2

7 Jul 2011

5340-15-005-1594
Clip Retainer Plate

150051594
4098094: RNCC: 3 | RNVC: 2
4098094: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-006-8957
Rod End Clevis

150068957
39A506-32-01-01: RNCC: 3 | RNVC: 2

2 Jan 1979

5340-15-005-4569
Handle Grip

150054569
1137-15-015: RNCC: 3 | RNVC: 2

20 Nov 1978

5340-15-119-0200
Rim Latch

151190200
70669590: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-002-1570
Headed Shoulder Pin

150021570
99R01253368O: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-007-5293
Plain Solid Disk

150075293
1239-01-220: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-204-8311
Retaining Band

152048311
5215/CE: RNCC: 3 | RNVC: 2
(241)AK0625215/CE: RNCC: 5 | RNVC: 2

13 Jan 2012

5340-15-111-5878
Retaining Strap

151115878
A12204-01-20: RNCC: 3 | RNVC: 2
A12204-01-20: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-110-3788
Friction Catch

151103788
4727248: RNCC: 3 | RNVC: 2
04727248: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-179-7687
Mounting Plate

151797687
GW34873: RNCC: 3 | RNVC: 2

3 Aug 2007

5340-15-003-4054
Loop Clamp

150034054
S208-26-304-03: RNCC: 3 | RNVC: 2
(241)A2142S208-26-304-03: RNCC: 5 | RNVC: 2

7 Nov 2013

5340-15-206-0223
Latch Bar

152060223
129-0321-85-101: RNCC: 3 | RNVC: 2
(241)A0126129-0321-85-101: RNCC: 5 | RNVC: 2

3 May 2012

5340-15-060-5689
Mending Plate

150605689
22291-101: RNCC: 3 | RNVC: 2

1 Jun 1977

5340-15-120-4765
Access Cover

151204765
1Z 595545: RNCC: 3 | RNVC: 2
1Z 595545: RNCC: 5 | RNVC: 9

5 Nov 1996

5340-15-063-5116
Bail Handle

150635116
60116640: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-153-3971
Plain Solid Disk

151533971
5137-402-11: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-073-8809
Retaining Strap

150738809
A7UNAV1046A37-743: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-060-4583
Clip Retainer Plate

150604583
68535-101A1: RNCC: 3 | RNVC: 2

21 Apr 1977

5340-15-204-3641
Padlock

152043641
25150056: RNCC: 3 | RNVC: 2
(241)ACA6425150056: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-177-3029
Angle Bracket

151773029
P-852636-001: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-055-5383
Butt Hinge

150555383
1971TAV64: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-151-7862
Angle Bracket

151517862
0-179597: RNCC: 3 | RNVC: 2

10 Jul 2000

5340-15-058-8876
Screw Thread Insert

150588876
181A1-1-3: RNCC: 5 | RNVC: 2
181A1-1-3: RNCC: 5 | RNVC: 9

7 Jan 1975

5340-15-108-8780
Bow Handle

151088780
MS-90/074GE00446B-03: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-109-5527
Bow Handle

151095527
10501005: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-061-2074
Lock-Release Lever

150612074
000200593400: RNCC: 5 | RNVC: 2
000200593400: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-102-7099
Handle Grip

151027099
32860030: RNCC: 3 | RNVC: 2

10 Aug 1987

5340-15-201-9273
Retaining Band

152019273
BMM 2936: RNCC: 3 | RNVC: 2
(241)A9260BMM 2936: RNCC: 5 | RNVC: 2

15 Jan 2007

5340-15-153-9414
Angle Bracket

151539414
142058214: RNCC: 2 | RNVC: 3

12 Mar 2001

5340-15-170-6699
Mounting Bracket

151706699
71-201787: RNCC: 3 | RNVC: 2

5 May 2003

5340-15-111-3797
Strap Hinge

151113797
113A6022-010: RNCC: 3 | RNVC: 2

7 Sep 1990

5340-15-060-4652
Rod End Clevis

150604652
1026-02-171: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-068-7844
Door Handle

150687844
204-1300-25-2: RNCC: 3 | RNVC: 2

30 Jan 1987

5340-15-004-1229
Screw Thread Insert

150041229
68039-101: RNCC: 3 | RNVC: 2

7 Nov 1977

5340-15-060-8443
Butt Hinge

150608443
F400C1A37: RNCC: 3 | RNVC: 2
F400C1A-37: RNCC: 5 | RNVC: 2
F400C1A-37: RNCC: 5 | RNVC: 2

20 May 1977

5340-15-000-5508
Mounting Plate

150005508
13HJ04643228S01-801-001: RNCC: 3 | RNVC: 2

15 Mar 2013

5340-15-177-4261
Mounting Bracket

151774261
049201: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-202-5451
Beam Gripping Clamp

152025451
14HJ04343021S01-417/2: RNCC: 3 | RNVC: 2

6 May 2007

5340-15-162-4063
Loop Clamp

151624063
3630.022: RNCC: 3 | RNVC: 2

16 Aug 2001

5340-15-050-7131
Handle Grip

150507131
41773-21A: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-117-8513
Angle Bracket

151178513
SF260-11-290-11: RNCC: 3 | RNVC: 2
SF260-11-290-11: RNCC: 5 | RNVC: 9

28 Jan 1994

5340-15-163-4597
Rod End Clevis

151634597
17H-329A01000-013-804K: RNCC: 3 | RNVC: 2

24 Sep 2002

5340-15-115-0215
Plain Solid Disk

151150215
02-10-735-204: RNCC: 3 | RNVC: 2

16 Jun 1993

5340-15-057-3168
Angle Bracket

150573168
1276-09-276: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-051-5082
Retaining Strap

150515082
739011U: RNCC: 3 | RNVC: 2
T2I111C: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-001-8074
Mounting Plate

150018074
5949786195: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-119-3880
Rod End Clevis

151193880
G6X24: RNCC: 3 | RNVC: 2
93158440: RNCC: 5 | RNVC: 2

25 Jul 1994

5340-15-103-0696
Screw Thread Insert

151030696
M3/9508-0312: RNCC: 3 | RNVC: 2
037.40.001: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-059-3540
Retaining Strap

150593540
1127-40-304: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-156-9692
Mounting Bracket

151569692
RAD-0232/01: RNCC: 3 | RNVC: 2
(241)A0069RAD-0232/01: RNCC: 5 | RNVC: 2

25 Mar 2003

5340-15-155-2326
Retaining Strap

151552326
1TDL031: RNCC: 3 | RNVC: 2

11 Feb 2002

5340-15-205-3026
Control Rod

152053026
112744225: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-187-8207
Mounting Bracket

151878207
018.066.00.42: RNCC: 3 | RNVC: 2
(241)A6479018.066.00.42: RNCC: 5 | RNVC: 2
018.066.00.42: RNCC: 5 | RNVC: 2

7 May 2009

5340-15-116-1620
Retaining Strap

151161620
08226-101B00: RNCC: 3 | RNVC: 2

17 Mar 1993

5340-15-154-3798
Loop Clamp

151543798
EN4114F09NH1: RNCC: 2 | RNVC: 2

14 May 2001

5340-15-199-5398
Rim Lock Set

151995398
ART.4031-DX: RNCC: 3 | RNVC: 2

17 Apr 2005

5340-15-181-0469
Loop Clamp

151810469
17315199: RNCC: 3 | RNVC: 2
(241)A424917315199: RNCC: 5 | RNVC: 2

8 Oct 2008

5340-15-109-1843
Angle Bracket

151091843
1357849: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-064-2039
Screw Thread Insert

150642039
590-962-309: RNCC: 3 | RNVC: 2
590.962.309: RNCC: 5 | RNVC: 2
590.962.309: RNCC: 5 | RNVC: 2

6 Dec 1983

5340-15-066-2727
Screw Thread Insert

150662727
1276-16-195: RNCC: 3 | RNVC: 2
127616195: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-154-2264
Angle Bracket

151542264
60191531: RNCC: 3 | RNVC: 2

28 Mar 2001

5340-15-003-4628
Access Cover

150034628
182714104: RNCC: 3 | RNVC: 2
(241)A0199182714104: RNCC: 5 | RNVC: 2

14 Nov 2013

5340-15-151-9455
Angle Bracket

151519455
0-174917: RNCC: 3 | RNVC: 2
00174917: RNCC: 3 | RNVC: 2
(241)A39630-174917: RNCC: 5 | RNVC: 2

26 Jul 2000

5340-15-112-0298
Bow Handle

151120298
ART.17-03-1: RNCC: 3 | RNVC: 2

19 Feb 1991

5340-15-150-0919
Butt Hinge

151500919
026080088: RNCC: 3 | RNVC: 2

29 Jul 1999

Load More Results