What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 25 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 25 of 72

5340-15-187-4643
Butt Hinge

151874643
423-7082: RNCC: 3 | RNVC: 2
(241)AA136423-7082: RNCC: 5 | RNVC: 2

2 Apr 2009

5340-15-134-0905
Handle Grip

151340905
8576935: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-148-3523
Mending Plate

151483523
110787: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-186-9124
Loop Clamp

151869124
375140: RNCC: 3 | RNVC: 2
375140: RNCC: 5 | RNVC: 9

5 Jan 2009

5340-15-149-2475
Loop Clamp

151492475
17764792: RNCC: 3 | RNVC: 2
(241)A311417764792: RNCC: 5 | RNVC: 2
17764893: RNCC: 5 | RNVC: 2

1 Feb 1999

5340-15-197-1758
Rim Lock Set

151971758
PN UAS 00035684: RNCC: 3 | RNVC: 2
5340F76030755: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-151-4761
Angle Bracket

151514761
0-154919: RNCC: 3 | RNVC: 2
00154919: RNCC: 3 | RNVC: 2
(241)A39630-154919: RNCC: 5 | RNVC: 2
1PA39630-154919: RNCC: 5 | RNVC: 2

30 May 2000

5340-15-149-8506
Plain Solid Disk

151498506
D0A090999: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-15-194-8420
Padlock

151948420
26021-40: RNCC: 3 | RNVC: 2

25 Jan 2011

5340-15-149-2146
Hand Crank

151492146
RM691-033: RNCC: 5 | RNVC: 2
RM691-033: RNCC: 5 | RNVC: 9

23 Dec 1998

5340-15-063-2715
Angle Bracket

150632715
60102861: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-051-3162
Loop Clamp

150513162
1-04183-05: RNCC: 3 | RNVC: 2
10418305: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-150-8591
Mounting Bracket

151508591
00085683: RNCC: 3 | RNVC: 2

1 Feb 2000

5340-15-005-1947
Retaining Clip

150051947
14579282: RNCC: 3 | RNVC: 2
14579282: RNCC: 5 | RNVC: 2
14579282: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-178-9305
Mounting Bracket

151789305
ST012MD004AA00: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-15-007-3272
Spring Holder

150073272
1137-16-253: RNCC: 3 | RNVC: 2

27 Oct 1979

5340-15-058-8879
Retaining Strap

150588879
181A1-8: RNCC: 5 | RNVC: 2
181A1-8: RNCC: 5 | RNVC: 9

7 Jan 1975

5340-15-200-0575
Lock-Release Lever

152000575
13HJ04643008S01-406-10: RNCC: 3 | RNVC: 2

19 Sep 2005

5340-15-177-3817
Mounting Bracket

151773817
032466: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-198-4174
Loop Clamp

151984174
122505575: RNCC: 3 | RNVC: 2

27 Sep 2004

5340-15-006-5122
Mounting Bracket

150065122
PR6010: RNCC: 3 | RNVC: 2
(241)A8681PR6010: RNCC: 5 | RNVC: 2

16 Dec 2013

5340-15-001-1405
Mounting Bracket

150011405
CARP28391: RNCC: 3 | RNVC: 2

31 May 2013

5340-15-109-7281
Retaining Band

151097281
771369: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-116-3550
Loop Clamp

151163550
22204209: RNCC: 3 | RNVC: 2

28 Apr 1993

5340-15-206-8038
Mounting Plate

152068038
ED0085459390-S: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-003-1360
Mounting Bracket

150031360
504355131: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-064-5885
Loop Clamp

150645885
4739062: RNCC: 3 | RNVC: 2

17 Nov 1983

5340-15-053-3437
Rod End Clevis

150533437
4-16155-101-72590C1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-156-2601
Expansion Plug

151562601
055034: RNCC: 3 | RNVC: 2
(241)A9772055034: RNCC: 5 | RNVC: 2

19 Dec 2002

5340-15-179-8999
Rod End Clevis

151798999
D1403979: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-063-4762
Angle Bracket

150634762
2492141: RNCC: 3 | RNVC: 2

15 Jun 1982

5340-15-209-4521
Handle Grip

152094521
182248080: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-178-2749
Thumb Latch

151782749
37-16200-00: RNCC: 3 | RNVC: 2

29 Apr 2005

5340-15-154-1446
Angle Bracket

151541446
0-115130: RNCC: 3 | RNVC: 2
(241)A39630-115130: RNCC: 5 | RNVC: 2
1PA39630-115130: RNCC: 5 | RNVC: 2

22 Mar 2001

5340-15-009-7066
Door Handle

150097066
1236-09-191: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-073-5618
Flush Lock

150735618
19880-025: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-180-1592
Mounting Bracket

151801592
6847329: RNCC: 3 | RNVC: 2

15 Feb 2008

5340-15-120-0257
Loop Clamp

151200257
73005382: RNCC: 3 | RNVC: 2

5 Dec 1994

5340-15-156-4066
Loop Clamp

151564066
142068206: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-193-1831
Lock Key

151931831
00620.01.0: RNCC: 3 | RNVC: 2
W08: RNCC: 3 | RNVC: 2

20 Apr 2010

5340-15-055-6016
Butt Hinge

150556016
1971TAV69-7: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-195-8063
Mounting Bracket

151958063
117071: RNCC: 3 | RNVC: 2
(241)AJ611117071: RNCC: 5 | RNVC: 2

16 May 2011

5340-15-062-9058
Mending Plate

150629058
0-55611: RNCC: 3 | RNVC: 2

9 Jul 1981

5340-15-001-5816
Screw Hook

150015816
42566660: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-122-2844
Mounting Bracket

151222844
800062700: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-119-0696
Loop Clamp

151190696
70925097: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-100-6844
Spring Holder

151006844
W000029: RNCC: 3 | RNVC: 2
(7001)5340151006844: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-157-5168
Angle Bracket

151575168
212-9010-65-10: RNCC: 3 | RNVC: 2

12 Sep 2003

5340-15-194-3568
Block Clamp

151943568
109-0515-58-127: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-15-109-1812
Retaining Strap

151091812
1357149: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-105-8236
Split Tubular Clip

151058236
22213: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-051-1395
Handle Grip

150511395
8804-2: RNCC: 3 | RNVC: 2
8804-2: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-122-2809
Loop Clamp

151222809
800057225: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-101-5385
Angle Bracket

151015385
000200309600: RNCC: 5 | RNVC: 2
000200309600: RNCC: 5 | RNVC: 9

30 May 1987

5340-15-102-1052
Webbing Strap

151021052
192-0547/14: RNCC: 3 | RNVC: 2

22 Jun 1986

5340-15-003-1367
Angle Bracket

150031367
500433729: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-203-7231
Access Cover

152037231
00234R0410: RNCC: 3 | RNVC: 2
CV173764: RNCC: 5 | RNVC: 2
00234R0410: RNCC: 5 | RNVC: 2

27 Jun 2011

5340-15-168-9108
Coat And Hat Hook

151689108
F71013786: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-147-7904
Mounting Bracket

151477904
P-1806: RNCC: 3 | RNVC: 2

10 Apr 1998

5340-15-120-3038
Spring Tension Clip

151203038
14184074: RNCC: 3 | RNVC: 2

20 Mar 1995

5340-15-089-5811
Butt Hinge

150895811
16930-075: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-188-8024
Rigid Caster

151888024
21427: RNCC: 3 | RNVC: 2

19 Nov 2009

5340-15-199-4995
Loop Clamp

151994995
74629F91: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-15-179-7769
Loop Clamp

151797769
60111468: RNCC: 3 | RNVC: 2
(241)A424960111468: RNCC: 5 | RNVC: 2

3 Aug 2007

5340-15-065-8578
Loop Clamp

150658578
50.45.006.0: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-174-6447
Mounting Bracket

151746447
CARP33586: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-15-053-5644
Leather Strap

150535644
02-096A01: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-121-9194
Angle Bracket

151219194
93803819: RNCC: 3 | RNVC: 2

29 Mar 1996

5340-15-199-2106
Stand Base

151992106
161303109: RNCC: 3 | RNVC: 2
(241)A0199161303109: RNCC: 3 | RNVC: 2

7 Feb 2005

5340-15-118-4588
Loop Clamp

151184588
60152219: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-179-9036
Spring Holder

151799036
D1402417: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-193-7253
Mounting Bracket

151937253
504109382: RNCC: 3 | RNVC: 2

2 Jul 2010

5340-15-006-1089
Leather Strap

150061089
55: RNCC: 3 | RNVC: 2

18 Sep 1979

5340-15-109-3824
Angle Bracket

151093824
5137-293-28: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-153-5261
Filler Opening Cap

151535261
ICF 25: RNCC: 3 | RNVC: 2
4420000000/72/08: RNCC: 5 | RNVC: 2

7 Feb 2001

5340-15-206-9114
Mounting Bracket

152069114
N718G1023202: RNCC: 3 | RNVC: 2
(241)A0126N718G1023202: RNCC: 5 | RNVC: 2

26 Jul 2012

5340-15-187-1987
Mounting Bracket

151871987
SC 100 614: RNCC: 3 | RNVC: 2
(241)A3980SC100614: RNCC: 5 | RNVC: 2

24 Feb 2009

5340-15-151-7352
Angle Bracket

151517352
0-159337: RNCC: 3 | RNVC: 2

4 Jul 2000

5340-15-138-4913
Angle Bracket

151384913
5988909: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-120-2256
Access Cover

151202256
60155049: RNCC: 3 | RNVC: 2

27 Feb 1995

5340-15-003-1343
Angle Bracket

150031343
5949791774: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-001-8186
Retaining Strap

150018186
4463591: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-004-8630
Bow Handle

150048630
310-0515-01: RNCC: 3 | RNVC: 2

27 Oct 1975

5340-15-118-6989
Mounting Bracket

151186989
73128497: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-180-1306
Loop Clamp

151801306
3613950: RNCC: 3 | RNVC: 2

28 Jan 2008

5340-15-196-8963
Retaining Band

151968963
PN UAS 00044056: RNCC: 3 | RNVC: 2
3470F76036635: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-188-3681
Mounting Plate

151883681
1Q 340582: RNCC: 3 | RNVC: 2
1Q340582: RNCC: 5 | RNVC: 2

3 Sep 2009

5340-15-121-9197
Angle Bracket

151219197
93815518: RNCC: 3 | RNVC: 2

29 Mar 1996

5340-15-001-5162
Mounting Bracket

150015162
129-8101-63-113: RNCC: 3 | RNVC: 2

9 Jul 2013

5340-15-119-1462
Mounting Bracket

151191462
73125866: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-202-2667
Loop Clamp

152022667
4816940: RNCC: 3 | RNVC: 2
(241)A42494816940: RNCC: 5 | RNVC: 2

19 Feb 2007

5340-15-122-0098
Flush Catch

151220098
60177111: RNCC: 3 | RNVC: 2

10 Apr 1996

5340-15-187-8208
Mounting Bracket

151878208
018.066.00.43: RNCC: 3 | RNVC: 2
(241)A6479018.066.00.43: RNCC: 5 | RNVC: 2
018.066.00.43: RNCC: 5 | RNVC: 2

7 May 2009

5340-15-203-8728
Swivel Caster

152038728
6102: RNCC: 3 | RNVC: 2
303075.626: RNCC: 5 | RNVC: 2
399-4762: RNCC: 5 | RNVC: 2

12 Jul 2011

5340-15-112-3510
Loop Clamp

151123510
10450590: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-063-3375
Loop Clamp

150633375
60108667: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-121-6548
Mounting Bracket

151216548
800050640: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-207-8505
Plug Button

152078505
50.50121: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-107-4867
Retaining Bail

151074867
18050/2: RNCC: 3 | RNVC: 2

17 Jul 1989

5340-15-007-1919
Loop Clamp

150071919
1389024: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-152-1337
Loop Clamp

151521337
99461488: RNCC: 3 | RNVC: 2

7 Aug 2000

5340-15-061-2788
Retaining Strap

150612788
000200164400: RNCC: 5 | RNVC: 2
1200096-15D000005: RNCC: 5 | RNVC: 2
000200164400: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-100-3745
Mounting Plate

151003745
F492C2C2: RNCC: 3 | RNVC: 2

10 Apr 1987

5340-15-108-2528
Rod End Clevis

151082528
0455/4/13/96: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-121-9012
Access Cover

151219012
132508136: RNCC: 3 | RNVC: 2

19 Mar 1996

5340-15-177-4946
Elastic Strap

151774946
P00694: RNCC: 3 | RNVC: 2

17 Apr 2004

5340-15-203-9956
Control Rod

152039956
C5E439: RNCC: 3 | RNVC: 2
(241)A0178C5E439: RNCC: 5 | RNVC: 2

2 Aug 2011

5340-15-203-6768
Mounting Bracket

152036768
504332425: RNCC: 3 | RNVC: 2

24 Jun 2011

5340-15-108-4214
Loop Clamp

151084214
4933297: RNCC: 3 | RNVC: 2

5 Jan 1989

5340-15-207-0269
Loop Clamp

152070269
A708AA04: RNCC: 3 | RNVC: 2

10 Aug 2012

5340-15-189-2659
Access Cover

151892659
391400121: RNCC: 3 | RNVC: 2
0391400121: RNCC: 5 | RNVC: 2

10 Feb 2010

5340-15-195-2182
Access Cover

151952182
209718121: RNCC: 3 | RNVC: 2
209718121: RNCC: 5 | RNVC: 2
CV173676: RNCC: 5 | RNVC: 2

7 Mar 2011

5340-15-207-8722
Access Cover

152078722
504375232: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-139-7839
Handle Grip

151397839
1000750: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-002-3471
Rim Latch

150023471
723019913000: RNCC: 3 | RNVC: 2

16 Aug 2013

5340-15-008-0729
Retaining Strap

150080729
1393556: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-064-8073
Angle Bracket

150648073
60116645: RNCC: 3 | RNVC: 2

17 Nov 1983

5340-15-152-7984
Mounting Bracket

151527984
P200513: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-122-2079
Mounting Bracket

151222079
80A067809: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-102-0787
Butt Hinge Leaf

151020787
213A7078-001: RNCC: 3 | RNVC: 2

29 Jul 1988

5340-15-073-8904
Flush Lock

150738904
13A65X40-3LEVE: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-060-1716
Rod End Clevis

150601716
20610-101A1: RNCC: 3 | RNVC: 2
20610-101B00: RNCC: 5 | RNVC: 2

18 Jan 1977

5340-15-189-2664
Mounting Plate

151892664
391700251: RNCC: 3 | RNVC: 2
0391700251: RNCC: 5 | RNVC: 2

10 Feb 2010

5340-15-119-3812
Loop Clamp

151193812
60170651: RNCC: 3 | RNVC: 2

25 Jul 1994

5340-15-148-4036
Loop Clamp

151484036
585605381716: RNCC: 3 | RNVC: 2

10 Aug 1998

5340-15-001-0656
Rod End Clevis

150010656
5124T33P01: RNCC: 3 | RNVC: 2

24 May 2013

5340-15-009-8392
Leather Strap

150098392
04-089-448: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-119-4025
Angle Bracket

151194025
60173876: RNCC: 3 | RNVC: 2

25 Jul 1994

5340-15-205-4181
Retaining Strap

152054181
178904340: RNCC: 3 | RNVC: 2
(241)A0199178904340: RNCC: 5 | RNVC: 2

8 Mar 2012

5340-15-009-1062
Lock-Release Lever

150091062
1239-06-105: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-178-3273
Metal Grille

151783273
BN024: RNCC: 3 | RNVC: 2

29 Apr 2005

5340-15-187-3115
Retaining Band

151873115
UZ197: RNCC: 3 | RNVC: 2
(241)A9410UZ197: RNCC: 5 | RNVC: 2

11 Mar 2009

5340-15-112-3527
Butt Hinge Leaf

151123527
93917007: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-153-8097
Retaining Strap

151538097
01100A116420: RNCC: 5 | RNVC: 3
01100A116420: RNCC: 5 | RNVC: 9

1 Mar 2001

5340-15-198-4259
Access Cover

151984259
122516138: RNCC: 3 | RNVC: 2

27 Sep 2004

5340-15-187-1826
Strap Hinge

151871826
SC 100 715: RNCC: 3 | RNVC: 2
(241)A3980SC100715: RNCC: 5 | RNVC: 2

24 Feb 2009

5340-15-073-5255
Flush Lock

150735255
1103: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-118-9129
Loop Clamp

151189129
70640677: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-002-1403
Mounting Bracket

150021403
5801406866: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-001-1383
Retaining Clip

150011383
18057571: RNCC: 3 | RNVC: 2

31 May 2013

5340-15-201-7695
Stand Base

152017695
142061266: RNCC: 3 | RNVC: 2

12 Dec 2006

5340-15-002-1377
Mounting Bracket

150021377
5801510749: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-205-2744
Hand Crank

152052744
0.009.0535.4: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-118-4028
Angle Bracket

151184028
60167483: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-118-1711
Retaining Strap

151181711
60100633: RNCC: 3 | RNVC: 2

20 Apr 1994

5340-15-153-3009
Handle Grip

151533009
122603316: RNCC: 2 | RNVC: 3

13 Dec 2000

5340-15-003-9074
Mounting Plate

150039074
182741040: RNCC: 3 | RNVC: 2
(241)A0199182741040: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-163-3880
Bridge Clamp

151633880
9473908: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-119-7167
Angle Bracket

151197167
60173129: RNCC: 3 | RNVC: 2

8 Nov 1994

5340-15-124-5833
Angle Bracket

151245833
181467269: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-128-3695
Handle Grip

151283695
7405033: RNCC: 3 | RNVC: 2
7405033: RNCC: 5 | RNVC: 9

9 Oct 1996

5340-15-106-9675
Angle Bracket

151069675
1368686: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-007-8538
Angle Bracket

150078538
4988012: RNCC: 3 | RNVC: 2

27 Aug 1979

5340-15-163-3871
Bridge Clamp

151633871
9464757: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-163-3879
Bridge Clamp

151633879
9473907: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-118-7699
Mounting Bracket

151187699
4767324: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-155-6558
Loop Clamp

151556558
0550125: RNCC: 3 | RNVC: 2
(241)A97720550125: RNCC: 8 | RNVC: 2

14 May 2002

5340-15-195-8054
Mounting Bracket

151958054
346324: RNCC: 3 | RNVC: 2
(241)AJ611346324: RNCC: 5 | RNVC: 2

16 May 2011

5340-15-198-7950
Loop Clamp

151987950
60191948: RNCC: 3 | RNVC: 2

17 Nov 2004

5340-15-149-0694
Butt Hinge

151490694
970557: RNCC: 3 | RNVC: 2

23 Nov 1998

5340-15-121-4620
Butt Hinge Leaf

151214620
211A7171-001: RNCC: 3 | RNVC: 2

21 Dec 1995

5340-15-153-4013
Support Hook

151534013
5176-226-02: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-051-5088
Retaining Strap

150515088
T2W182: RNCC: 3 | RNVC: 2
719179M: RNCC: 5 | RNVC: 2

31 Dec 1975

5340-15-007-0575
Lock-Release Lever

150070575
1137-03-900: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-147-3658
Access Cover

151473658
109-0745-93-113: RNCC: 3 | RNVC: 2

31 Oct 1997

5340-15-115-0025
Bow Handle

151150025
728300000103: RNCC: 5 | RNVC: 2
728300000103: RNCC: 5 | RNVC: 9

23 Oct 1992

5340-15-119-1922
Angle Bracket

151191922
75218838: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-129-8700
Angle Bracket

151298700
541186: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-103-0767
Retaining Band

151030767
DE013.13.251: RNCC: 3 | RNVC: 2
(241)A5015DE013.13.251: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-153-3882
Mending Plate

151533882
5137-309-05: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-120-7110
Leather Strap

151207110
555902264000: RNCC: 3 | RNVC: 2
559-02-2640: RNCC: 3 | RNVC: 2

31 Jul 1995

5340-15-100-8094
Butt Hinge Leaf

151008094
109-0640-50-140: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-15-170-9014
Loop Clamp

151709014
71406248: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-062-9072
Angle Bracket

150629072
0-55810: RNCC: 3 | RNVC: 2

28 Aug 1981

5340-15-118-2015
Loop Clamp

151182015
17316190: RNCC: 3 | RNVC: 2
A203019-003: RNCC: 5 | RNVC: 2

22 Apr 1994

5340-15-107-1078
Spring Holder

151071078
301-01-1600: RNCC: 3 | RNVC: 2

14 Apr 1987

5340-15-073-5631
Flush Lock

150735631
19890-050: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-203-1550
Latch Bar

152031550
212-1300-96-102: RNCC: 3 | RNVC: 2

27 Nov 2007

5340-15-194-8514
Bow Handle

151948514
P3832: RNCC: 3 | RNVC: 2

25 Jan 2011

5340-15-103-4817
Protection Bellows

151034817
W007759: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-105-4413
Handle Grip

151054413
4560130: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-074-3996
Retaining Strap

150743996
12UNI2137: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-179-2666
Clamping Catch

151792666
D1-85121-001: RNCC: 3 | RNVC: 2

10 Aug 2006

5340-15-063-3652
Retaining Strap

150633652
42034262: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-008-0742
Angle Bracket

150080742
1386349: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-007-1961
Retaining Strap

150071961
1384615: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-145-1996
Mounting Bracket

151451996
109-0822-69-103: RNCC: 3 | RNVC: 2

2 Jun 1997

5340-15-106-9670
Angle Bracket

151069670
4508030: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-113-8620
Mending Plate

151138620
1P 578413: RNCC: 3 | RNVC: 2
1P 578413: RNCC: 5 | RNVC: 9

13 Jun 1994

5340-15-065-6258
Compression Cup

150656258
6399023CREP39: RNCC: 3 | RNVC: 2

4 Oct 1984

5340-15-119-7154
Angle Bracket

151197154
60172889: RNCC: 3 | RNVC: 2

8 Nov 1994

5340-15-201-9274
Retaining Band

152019274
BMM 1025: RNCC: 3 | RNVC: 2
(241)A9260BMM 1025: RNCC: 5 | RNVC: 2

15 Jan 2007

5340-15-187-1986
Mounting Bracket

151871986
SC 100 613: RNCC: 3 | RNVC: 2
(241)A3980SC100613: RNCC: 5 | RNVC: 2

24 Feb 2009

5340-15-107-1041
Spring Holder

151071041
301-01-1170: RNCC: 3 | RNVC: 2

14 Apr 1987

5340-15-152-1486
Angle Bracket

151521486
60170502: RNCC: 3 | RNVC: 2

8 Aug 2000

5340-15-119-5477
Expansion Plug

151195477
4718740: RNCC: 3 | RNVC: 2

19 Sep 1994

5340-15-045-4094
Loop Clamp

150454094
785-20-38: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-187-5678
Bow Handle

151875678
TAK-0090/01: RNCC: 3 | RNVC: 2

9 Apr 2009

5340-15-004-8876
Spring Tension Clip

150048876
8-3645-300-25817-3: RNCC: 3 | RNVC: 2

7 Sep 1978

5340-15-147-7691
Mending Plate

151477691
611-0070: RNCC: 3 | RNVC: 2

6 Apr 1998

5340-15-198-9111
Screw Thread Insert

151989111
26HJ04103051S01-043/N: RNCC: 3 | RNVC: 2

25 Nov 2004

5340-15-151-0355
Access Cover

151510355
(241)A3649063188: RNCC: 3 | RNVC: 2
063188: RNCC: 3 | RNVC: 2
63188: RNCC: 3 | RNVC: 2

18 Apr 2000

5340-15-206-0221
Doorknob

152060221
129-0321-86-101: RNCC: 3 | RNVC: 2
(241)A0126129-0321-86-101: RNCC: 5 | RNVC: 2

3 May 2012

5340-15-132-8273
Handle Grip

151328273
700624: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-063-5760
Bail Handle

150635760
024200298850: RNCC: 5 | RNVC: 2
024200298850: RNCC: 5 | RNVC: 9

16 May 1983

5340-15-160-3458
Coat And Hat Hook

151603458
F720033611: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-059-3927
Screw Thread Insert

150593927
2146-06-325: RNCC: 3 | RNVC: 2
214606325: RNCC: 5 | RNVC: 2

26 Jun 1978

5340-15-102-1048
Hand Crank

151021048
192-0879/33: RNCC: 3 | RNVC: 2

22 Jun 1986

5340-15-198-9650
Angle Bracket Set

151989650
UMM1076: RNCC: 2 | RNVC: 2

10 Dec 2004

5340-15-116-4810
Angle Bracket

151164810
60166331: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-062-4760
Access Door Hinge

150624760
109-0503-18-1: RNCC: 3 | RNVC: 2

29 Apr 1982

5340-15-109-8781
Angle Bracket

151098781
60152002: RNCC: 3 | RNVC: 2

15 Oct 1988

5340-15-120-8098
Retaining Strap

151208098
127451: RNCC: 3 | RNVC: 2

4 Jul 1996

5340-15-119-0229
Access Cover

151190229
70673971: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-116-4774
Butt Hinge Leaf

151164774
60149747: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-105-8385
Retaining Band

151058385
5/1323: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-064-7165
Retaining Strap

150647165
01-245-E-286: RNCC: 3 | RNVC: 2

24 Jun 1984

5340-15-163-0240
Mounting Bracket

151630240
CARP28349: RNCC: 3 | RNVC: 2

14 May 2002

5340-15-045-3575
Loop Clamp

150453575
740-20-20: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-007-8974
Expansion Plug

150078974
1-43285-01: RNCC: 3 | RNVC: 2
0-48656: RNCC: 5 | RNVC: 2
14328501: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-118-3101
Access Cover

151183101
1266.001.200: RNCC: 3 | RNVC: 2

7 Nov 1994

5340-15-003-5355
Lever Bracket

150035355
4549892: RNCC: 3 | RNVC: 2
4549892: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-231-9325
Angle Bracket

152319325
98420734: RNCC: 3 | RNVC: 2
534015E137187: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-187-1358
Threaded Rod End

151871358
79083370: RNCC: 3 | RNVC: 2

19 Feb 2009

5340-15-152-7951
Bow Handle

151527951
P200106: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-120-3525
Mending Plate

151203525
60176166: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-064-7651
Angle Bracket

150647651
19.75.04.35: RNCC: 3 | RNVC: 2

26 Dec 1983

5340-15-111-7972
Mending Plate

151117972
9961: RNCC: 3 | RNVC: 2

1 Jul 1990

5340-15-122-1634
Plug Button

151221634
999-5001-10-150: RNCC: 3 | RNVC: 2

30 May 1996

5340-15-196-2012
Rim Lock Set

151962012
PN UAS 00002086: RNCC: 3 | RNVC: 2
5340F76003363: RNCC: 5 | RNVC: 9

31 Mar 2004

5340-15-073-5250
Flush Lock

150735250
13A65X90-1LEVA: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-204-4872
Mounting Bracket

152044872
209719882: RNCC: 3 | RNVC: 2
209719882: RNCC: 5 | RNVC: 2
CV173681: RNCC: 5 | RNVC: 2

7 Nov 2011

5340-15-073-5221
Rim Lock

150735221
1447BISPARTD: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-102-1671
Mending Plate

151021671
8243.02.18: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-116-4818
Angle Bracket

151164818
60150608: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-004-5172
Loop Clamp

150045172
20012: RNCC: 5 | RNVC: 2
20012: RNCC: 5 | RNVC: 9

17 Jul 1978

5340-15-103-8666
Loop Clamp

151038666
10450390: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-162-0284
Mortise Lock Set

151620284
1SDA013886: RNCC: 3 | RNVC: 2

15 Nov 2000

5340-15-001-0654
Rod End Clevis

150010654
5124T32P01: RNCC: 3 | RNVC: 2

24 May 2013

5340-15-001-3082
Mounting Bracket

150013082
5801451129: RNCC: 3 | RNVC: 2

17 Jun 2013

5340-15-001-0665
Rod End Clevis

150010665
4076T41G01: RNCC: 3 | RNVC: 2

24 May 2013

5340-15-007-5005
Lock-Release Lever

150075005
1139-02-123: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-178-2356
Spring Holder

151782356
RT100.50: RNCC: 3 | RNVC: 2

11 Mar 2005

5340-15-109-0846
Angle Bracket

151090846
60103079: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-148-3546
Angle Bracket

151483546
106654: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-120-3347
Handle Grip

151203347
ELESA I142: RNCC: 3 | RNVC: 2
93158758: RNCC: 5 | RNVC: 2

30 Mar 1995

5340-15-000-1112
Control Rod

150001112
C5F048: RNCC: 3 | RNVC: 2

30 Jan 2013

5340-15-004-5077
Clip Retainer Plate

150045077
5ACGF321: RNCC: 3 | RNVC: 2

13 Sep 1977

5340-15-114-1119
Expansion Plug

151141119
181634: RNCC: 3 | RNVC: 2

29 Apr 1992

5340-15-109-1797
Retaining Strap

151091797
1357695: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-118-7486
Mounting Bracket

151187486
9431888: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-060-6622
Handle Grip

150606622
5258-9: RNCC: 3 | RNVC: 2
5258-9: RNCC: 5 | RNVC: 9

18 Apr 1977

5340-15-003-0761
Angle Bracket

150030761
712618: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-002-5966
Loop Clamp

150025966
41231102: RNCC: 3 | RNVC: 2

4 Sep 2013

5340-15-002-3661
Mounting Bracket

150023661
ED0087250720-S: RNCC: 3 | RNVC: 2

16 Aug 2013

5340-15-000-8688
Mounting Bracket

150008688
FA643E134: RNCC: 3 | RNVC: 2

15 Apr 2013

5340-15-118-3669
Mending Plate

151183669
60144922: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-101-9078
Retaining Strap

151019078
D9104034P: RNCC: 3 | RNVC: 2
D9104034P: RNCC: 5 | RNVC: 9

25 Nov 1992

5340-15-115-3576
Access Cover

151153576
TN4.9006.012.01: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-116-7810
Access Cover

151167810
360-SCL-10DL: RNCC: 3 | RNVC: 2

21 Apr 1994

5340-15-110-7220
Retaining Strap

151107220
129-0041-34-101: RNCC: 3 | RNVC: 2

18 Oct 1989

5340-15-117-6389
Access Cover

151176389
142507012: RNCC: 3 | RNVC: 2

4 Jan 1994

5340-15-071-3603
Friction Catch

150713603
1971TAV118-4: RNCC: 3 | RNVC: 2

21 Mar 1977

5340-15-118-2648
Loop Clamp

151182648
D0485404: RNCC: 3 | RNVC: 2

11 Apr 1995

5340-15-113-6651
Plug Button

151136651
999-5001-10-124: RNCC: 3 | RNVC: 2

3 Feb 1992

5340-15-073-5231
Rim Lock

150735231
39B75X40: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-063-6479
Rod End Clevis

150636479
0.275.F.11: RNCC: 3 | RNVC: 2

9 Mar 1982

5340-15-073-5242
Flush Lock

150735242
13A65X35-1LEVA: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-154-3785
Loop Clamp

151543785
EN4113V52NH: RNCC: 2 | RNVC: 2

14 May 2001

5340-15-158-6265
Handle Grip

151586265
122611471: RNCC: 3 | RNVC: 2

10 Mar 2004

5340-15-120-7581
Screw Thread Insert

151207581
A0410096002: RNCC: 5 | RNVC: 2
A0410096002: RNCC: 5 | RNVC: 9
A0410096002: RNCC: 5 | RNVC: 9

31 Jul 1995

5340-15-103-1358
Mending Plate

151031358
DE160.02.140: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-112-3482
Retaining Strap

151123482
4837062: RNCC: 3 | RNVC: 2
(7001)5340151123482: RNCC: 5 | RNVC: 2

7 Oct 1989

5340-15-112-3481
Retaining Strap

151123481
4837079: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-101-2307
Swivel Caster

151012307
SL851-5: RNCC: 3 | RNVC: 2

20 May 1987

5340-15-110-6822
Loop Clamp

151106822
4150041: RNCC: 3 | RNVC: 2

9 Jan 1990

5340-15-156-5866
Loop Clamp

151565866
910813: RNCC: 3 | RNVC: 2

28 Feb 2003

5340-15-160-7264
Coat And Hat Hook

151607264
EA00496721: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-150-6017
Angle Bracket

151506017
105937: RNCC: 3 | RNVC: 2

6 Dec 1999

5340-15-120-4882
Access Cover

151204882
142501014: RNCC: 3 | RNVC: 2

9 Jun 1995

5340-15-105-8917
Leather Strap

151058917
750/82: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-002-5407
Bow Handle

150025407
5801383331: RNCC: 3 | RNVC: 2

3 Sep 2013

5340-15-117-1337
Hand Crank

151171337
T0064276: RNCC: 3 | RNVC: 2
15830A10372A: RNCC: 5 | RNVC: 2
15830A10372A: RNCC: 5 | RNVC: 9

10 Aug 1993

5340-15-108-4079
Loop Clamp

151084079
12174890: RNCC: 3 | RNVC: 2

21 Jun 1996

5340-15-062-7911
Mending Plate

150627911
0-34161: RNCC: 3 | RNVC: 2

28 Aug 1982

5340-15-101-4691
Mending Plate

151014691
000200322200: RNCC: 5 | RNVC: 2
000200322200: RNCC: 5 | RNVC: 9

30 May 1987

5340-15-121-2857
Metal Grille

151212857
8500626160: RNCC: 3 | RNVC: 2

7 Nov 1995

5340-15-163-4062
Mounting Plate

151634062
9924516: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-179-8951
Retaining Strap

151798951
D1308561: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-121-1066
Mortise Lock Set

151211066
RC3214: RNCC: 3 | RNVC: 2

24 Jan 1996

5340-15-159-9656
Clamping Catch

151599656
122603512: RNCC: 3 | RNVC: 2

19 Apr 2004

5340-15-116-8473
Clip Retainer Plate

151168473
D0467941: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-15-108-7226
Retaining Strap

151087226
60145446: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-178-6479
Mounting Plate

151786479
2231.069.0010: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-112-1911
Retaining Strap

151121911
311A3341-001: RNCC: 3 | RNVC: 2

8 Mar 1991

5340-15-130-0195
Angle Bracket

151300195
250156: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-007-2046
Angle Bracket

150072046
1389330: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-006-8473
Screw Thread Insert

150068473
2803-02-01: RNCC: 3 | RNVC: 2

2 Jan 1979

5340-15-230-3482
Spring Tension Clip

152303482
1325-13-916: RNCC: 3 | RNVC: 2
536015E112739: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-006-9213
Rod End Clevis

150069213
NOR5-225-18-7: RNCC: 3 | RNVC: 2

30 May 1980

5340-15-114-4088
Butt Hinge Leaf

151144088
G610-12-24-03: RNCC: 3 | RNVC: 2

11 Jun 1992

5340-15-103-0715
Angle Bracket

151030715
DE013.13.315: RNCC: 3 | RNVC: 2
(241)A5015DE013.13.315: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-120-3542
Angle Bracket

151203542
60175671: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-051-3246
Retaining Strap

150513246
4567159: RNCC: 3 | RNVC: 2
4567159: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-153-5263
Filler Opening Cap

151535263
442000000/72/10: RNCC: 3 | RNVC: 2
ICF 30: RNCC: 5 | RNVC: 2

7 Feb 2001

5340-15-156-2064
Handle Grip

151562064
(241)A3460CBD70761P05: RNCC: 3 | RNVC: 2
CBD70761P05: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-005-4422
Retaining Strap

150054422
1385364: RNCC: 3 | RNVC: 2
1385364: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-205-2455
Handle Ferrule

152052455
42562545: RNCC: 3 | RNVC: 2

29 Feb 2012

5340-15-120-4449
Mending Plate

151204449
142512905: RNCC: 3 | RNVC: 2

25 May 1995

5340-15-120-3544
Angle Bracket

151203544
60175326: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-157-1794
Loop Clamp

151571794
A071A018NB: RNCC: 3 | RNVC: 2
(241)A0126A071A018NB: RNCC: 5 | RNVC: 2

15 May 2003

5340-15-001-7884
Mounting Bracket

150017884
500424423: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-059-3443
Retaining Strap

150593443
1127-32-250: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-178-3812
Retaining Strap

151783812
B1000-005: RNCC: 3 | RNVC: 2

29 Apr 2005

5340-15-178-5506
Mounting Plate

151785506
2231.022.0002: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-206-9962
Door Handle

152069962
120295: RNCC: 3 | RNVC: 2
(241)A3593120295: RNCC: 5 | RNVC: 2

6 Aug 2012

5340-15-050-9737
Butt Hinge Leaf

150509737
N83513T19818: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-101-6321
Retaining Strap

151016321
000200596200: RNCC: 5 | RNVC: 2
000200596200: RNCC: 5 | RNVC: 9

10 Apr 1987

5340-15-120-2733
Angle Bracket

151202733
60169767: RNCC: 3 | RNVC: 2

9 Mar 1995

5340-15-148-5334
Lock-Release Lever

151485334
93191487: RNCC: 3 | RNVC: 2

13 Aug 1999

5340-15-118-7892
Expansion Plug

151187892
14328301: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-120-2494
Angle Bracket

151202494
60145407: RNCC: 3 | RNVC: 2

6 Mar 1995

5340-15-205-8509
Handle Grip

152058509
5801321661: RNCC: 3 | RNVC: 2

6 Apr 2012

5340-15-109-3761
Retaining Strap

151093761
5137-344-05: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-105-4418
Handle Grip

151054418
8983593: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-187-9560
Cushioning Pad

151879560
3007049: RNCC: 3 | RNVC: 2

4 Jun 2009

5340-15-058-4555
Retaining Strap

150584555
553816151000: RNCC: 2 | RNVC: 3
538-16-1510: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-001-0405
Mounting Bracket

150010405
219AE3169-131: RNCC: 3 | RNVC: 2

21 May 2013

5340-15-007-3004
Mounting Bracket

150073004
98197666: RNCC: 3 | RNVC: 2

7 Jan 2014

5340-15-151-7256
Webbing Strap

151517256
0-178491: RNCC: 3 | RNVC: 2

4 Jul 2000

5340-15-117-0647
Retaining Clip

151170647
4629138: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-118-7093
Mounting Bracket

151187093
73129330: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-151-4780
Angle Bracket

151514780
0-170827: RNCC: 3 | RNVC: 2
00170827: RNCC: 3 | RNVC: 2
(241)A39630-170827: RNCC: 5 | RNVC: 2
1PA39630-170827: RNCC: 5 | RNVC: 2

30 May 2000

5340-15-002-3064
Mounting Plate

150023064
5801399740: RNCC: 3 | RNVC: 2

5 Aug 2013

5340-15-119-0877
Retaining Strap

151190877
70929816: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-119-7161
Angle Bracket

151197161
60173023: RNCC: 3 | RNVC: 2

8 Nov 1994

5340-15-120-4841
Access Cover

151204841
142519909: RNCC: 3 | RNVC: 2

9 Jun 1995

5340-15-148-3560
Angle Bracket

151483560
159134: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-149-1132
Hook Handle

151491132
60183502: RNCC: 3 | RNVC: 2

2 Dec 1998

5340-15-004-8023
Angle Bracket

150048023
P-110577-004: RNCC: 3 | RNVC: 2
P-110578-004: RNCC: 3 | RNVC: 2
P-110578-004: RNCC: 3 | RNVC: 2
P110578-004: RNCC: 3 | RNVC: 2
P110577-004: RNCC: 5 | RNVC: 2

18 Jul 1978

5340-15-119-0857
Expansion Plug

151190857
70928956: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-007-2223
Retaining Strap

150072223
1398241: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-130-3766
Angle Bracket

151303766
4558412: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-131-6576
Angle Bracket

151316576
551317: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-051-4197
Angle Bracket

150514197
4508029: RNCC: 3 | RNVC: 2
4508029: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-193-8884
Access Cover

151938884
9456618: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-15-001-3368
Access Cover

150013368
504374248: RNCC: 3 | RNVC: 2

17 Jun 2013

5340-15-121-0611
Screw Thread Insert

151210611
M8(X1.25)X1D: RNCC: 3 | RNVC: 2
210002507: RNCC: 5 | RNVC: 2

21 Sep 1995

5340-15-003-0865
Angle Bracket

150030865
723337: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-168-9448
Coat And Hat Hook

151689448
F72001828: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-116-4976
Spring Tension Clip

151164976
14215480: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-115-5036
Butt Hinge

151155036
9CA1780A019-401: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-147-8735
Access Cover

151478735
129104: RNCC: 3 | RNVC: 2

18 May 1998

5340-15-008-0830
Retaining Strap

150080830
60114209: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-103-4691
Retaining Strap

151034691
301-3607-00: RNCC: 3 | RNVC: 2

9 Feb 1988

5340-15-204-5111
Mounting Bracket

152045111
26HJ04143043S01-801/1103: RNCC: 3 | RNVC: 2
(241)A001926HJ04143043S01-801/11: RNCC: 5 | RNVC: 2

8 Nov 2011

5340-15-151-9398
Angle Bracket

151519398
0-173905: RNCC: 3 | RNVC: 2
(241)A39630-173905: RNCC: 5 | RNVC: 2

26 Jul 2000

5340-15-118-3648
Mending Plate

151183648
60141083: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-117-3972
Tubular Fairlead

151173972
B-3/4''X18/14: RNCC: 3 | RNVC: 2

31 Mar 1994

5340-15-118-7288
Retaining Strap

151187288
73127390: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-117-7058
Retaining Strap

151177058
D9103067P: RNCC: 3 | RNVC: 2
D9103067P: RNCC: 5 | RNVC: 9

10 Jan 1995

5340-15-061-7730
Catch Strike

150617730
4153030: RNCC: 3 | RNVC: 2

7 Sep 1982

5340-15-119-9635
Expansion Plug

151199635
74596F02: RNCC: 3 | RNVC: 2
74596F02: RNCC: 3 | RNVC: 2
74596F02: RNCC: 5 | RNVC: 9

22 May 1996

5340-15-109-4536
Mending Plate

151094536
1Q 513713: RNCC: 3 | RNVC: 2
1Q 513713: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-121-2135
Retaining Strap

151212135
06592-103C00: RNCC: 3 | RNVC: 2

23 Oct 1995

5340-15-108-2936
Angle Bracket

151082936
60130456: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-064-8078
Angle Bracket

150648078
60118396: RNCC: 3 | RNVC: 2

17 Nov 1983

5340-15-175-0304
Access Cover

151750304
B12101-649: RNCC: 3 | RNVC: 2

29 Dec 2003

5340-15-008-6107
Retaining Strap

150086107
110370: RNCC: 3 | RNVC: 2
4463590: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-109-1114
Mending Plate

151091114
11604A06-02: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-118-6149
Retaining Strap

151186149
73127364: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-001-5842
Utility Access Door

150015842
42566664: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-205-4211
Retaining Strap

152054211
178940141: RNCC: 3 | RNVC: 2
(241)A0199178940141: RNCC: 5 | RNVC: 2

8 Mar 2012

5340-15-149-3129
Rod End Clevis

151493129
4886026: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-119-3899
Rod End Clevis

151193899
60170413: RNCC: 3 | RNVC: 2

25 Jul 1994

5340-15-118-3627
Angle Bracket

151183627
60140252: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-119-0049
Catch Strike

151190049
8270126: RNCC: 3 | RNVC: 2
08270126: RNCC: 3 | RNVC: 2
8270126: RNCC: 3 | RNVC: 2
(241)AD7518270126: RNCC: 5 | RNVC: 2
8270126: RNCC: 5 | RNVC: 2

4 Jul 1994

5340-15-003-8952
Access Cover

150038952
182707100: RNCC: 3 | RNVC: 2
(241)A0199182707100: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-179-6756
Latch Bar

151796756
0000500408273: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-002-5548
Padlock

150025548
60209257: RNCC: 3 | RNVC: 2

3 Sep 2013

5340-15-006-3673
Angle Bracket

150063673
FL0401-101: RNCC: 3 | RNVC: 2

16 Nov 1979

5340-15-109-4070
Retaining Strap

151094070
5142-220-01: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-150-1903
Retaining Strap

151501903
A0008926: RNCC: 3 | RNVC: 2

25 Aug 1999

5340-15-203-1926
Mounting Plate

152031926
12HJ04343435S01-407: RNCC: 3 | RNVC: 2

28 Nov 2007

5340-15-121-0610
Screw Thread Insert

151210610
M3(X0.5)X1D: RNCC: 3 | RNVC: 2
210002501: RNCC: 5 | RNVC: 2

21 Sep 1995

5340-15-001-1084
Mounting Plate

150011084
5801350337: RNCC: 3 | RNVC: 2

31 May 2013

5340-15-066-3007
Angle Bracket

150663007
3522 243 67030: RNCC: 3 | RNVC: 2

17 Sep 1985

5340-15-120-3520
Mending Plate

151203520
60175580: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-003-8988
Mounting Plate

150038988
182741235: RNCC: 3 | RNVC: 2
(241)A0199182741235: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-006-1928
Rim Latch

150061928
1377581: RNCC: 3 | RNVC: 2
1377581: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-003-9383
Mounting Plate

150039383
182703197: RNCC: 3 | RNVC: 2
(241)A0199182703197: RNCC: 5 | RNVC: 2

4 Dec 2013

5340-15-102-1670
Mending Plate

151021670
8243.02.16: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-002-3066
Mounting Plate

150023066
504376204: RNCC: 3 | RNVC: 2

5 Aug 2013

5340-15-186-9013
Plug Button

151869013
049260: RNCC: 3 | RNVC: 2
0028528: RNCC: 5 | RNVC: 2

5 Jan 2009

5340-15-118-7094
Mounting Bracket

151187094
73129359: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-073-5208
Rim Lock Set

150735208
01488: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-147-2082
Mending Plate

151472082
60178575: RNCC: 3 | RNVC: 2

20 Oct 1997

5340-15-120-4455
Mending Plate

151204455
142503360: RNCC: 3 | RNVC: 2

25 May 1995

5340-15-053-0666
Screw Thread Insert

150530666
26T042P008: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-120-2506
Catch Strike

151202506
60144950: RNCC: 3 | RNVC: 2

6 Mar 1995

5340-15-109-8771
Angle Bracket

151098771
60135001: RNCC: 3 | RNVC: 2

15 Oct 1988

5340-15-139-9259
Spring Tension Clip

151399259
G227RA: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-113-9317
Hand Crank

151139317
425UNI2424FE42B7070: RNCC: 2 | RNVC: 2

10 May 1993

5340-15-153-0998
Retaining Band

151530998
9CD4050A054-401: RNCC: 3 | RNVC: 2

21 Nov 2000

5340-15-120-2737
Angle Bracket

151202737
60166026: RNCC: 3 | RNVC: 2

9 Mar 1995

5340-15-178-6394
Loop Clamp

151786394
2900.178.0003: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-000-8596
Handle Grip

150008596
ERLF002.1: RNCC: 3 | RNVC: 2

11 Apr 2013

5340-15-001-0304
Retaining Band

150010304
504375984: RNCC: 3 | RNVC: 2

15 May 2013

5340-15-153-7255
Mounting Bracket

151537255
142041160: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-009-0622
Loop Clamp

150090622
1390458: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-007-5147
Screw Thread Insert

150075147
1139-02-139: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-152-6753
Loop Clamp

151526753
S 2040105: RNCC: 3 | RNVC: 2
0-180342: RNCC: 5 | RNVC: 2

10 Oct 2000

5340-15-061-4919
Mending Plate

150614919
000200122400: RNCC: 5 | RNVC: 2
000200122400: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-115-8833
Filler Opening Cap

151158833
894-21: RNCC: 3 | RNVC: 2
894-21: RNCC: 5 | RNVC: 9

1 Feb 1993

5340-15-059-3444
Retaining Strap

150593444
1127-32-256: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-063-5666
Retaining Band

150635666
SF260-04-30-4: RNCC: 3 | RNVC: 2
SF260-04-30-4: RNCC: 5 | RNVC: 9

5 Apr 1983

5340-15-112-2996
Loop Clamp

151122996
005.2629: RNCC: 3 | RNVC: 2
79100968: RNCC: 5 | RNVC: 2

7 Sep 1991

5340-15-205-1057
Mounting Bracket

152051057
504374600: RNCC: 3 | RNVC: 2

21 Feb 2012

5340-15-117-0023
Bridge Clamp

151170023
79042204: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-118-6976
Mounting Bracket

151186976
73128391: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-180-9876
Metal Grille

151809876
095431144: RNCC: 3 | RNVC: 2
(241)A1782095431144: RNCC: 5 | RNVC: 2

12 Sep 2008

5340-15-149-1114
Strap Hinge

151491114
60172262: RNCC: 3 | RNVC: 2

2 Dec 1998

5340-15-060-8914
Retaining Clip

150608914
P44HA55: RNCC: 5 | RNVC: 2
P44HA55: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-129-2398
Angle Bracket

151292398
4099533: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-153-2589
Stand Base

151532589
122606444: RNCC: 2 | RNVC: 3

12 Dec 2000

5340-15-161-2154
Mounting Plate

151612154
305151: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-15-118-3860
Mending Plate

151183860
60157286: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-004-0007
Bow Handle

150040007
330-0148-01: RNCC: 3 | RNVC: 2

1 Sep 1976

5340-15-061-4170
Angle Bracket

150614170
P135053-001: RNCC: 3 | RNVC: 2

20 Jan 1978

5340-15-150-1073
Mounting Bracket

151501073
120015412: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-061-4783
Hand Crank Arm

150614783
000200063950: RNCC: 5 | RNVC: 2
1200096-134000016: RNCC: 5 | RNVC: 2
000200063950: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-204-2175
Mounting Bracket

152042175
23106: RNCC: 3 | RNVC: 2
(241)AJ30823106: RNCC: 5 | RNVC: 2

29 Sep 2011

5340-15-001-0657
Rod End Clevis

150010657
5124T34P01: RNCC: 3 | RNVC: 2

24 May 2013

5340-15-119-9247
Loop Clamp

151199247
69F006P001: RNCC: 3 | RNVC: 2

21 Nov 1994

5340-15-119-0738
Loop Clamp

151190738
70926917: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-118-6977
Mounting Bracket

151186977
73128392: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-108-3106
Loop Clamp

151083106
10450290: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-151-4012
Webbing Strap

151514012
0-118789: RNCC: 3 | RNVC: 2

22 May 2000

5340-15-111-9491
Butt Hinge Leaf

151119491
700A2617-003: RNCC: 3 | RNVC: 2

30 Jan 1991

5340-15-064-8468
Retaining Strap

150648468
000202987900: RNCC: 5 | RNVC: 2
000202987900: RNCC: 5 | RNVC: 9

16 Nov 1984

5340-15-001-8115
Metal Grille

150018115
5949790358: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-178-5215
Mounting Plate

151785215
629-986: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-152-7849
Mounting Plate

151527849
P120504: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-118-3390
Angle Bracket

151183390
60145850: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-063-3677
Handle Grip

150633677
60107839: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-064-9084
Plug Button

150649084
1807007: RNCC: 3 | RNVC: 2

19 Jun 1984

5340-15-151-7029
Angle Bracket

151517029
60115863: RNCC: 3 | RNVC: 2

3 Jul 2000

5340-15-148-3475
Mending Plate

151483475
102717: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-210-1664
Handle Grip

152101664
6027: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-118-7268
Mounting Bracket

151187268
4543282: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-052-8708
Rim Lock Set

150528708
DIS1971TAV017: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-118-3458
Strap Hinge

151183458
60142220: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-163-3886
Bridge Clamp

151633886
9478198: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-179-9734
Utility Access Door

151799734
11.069.A: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-204-3278
Mounting Bracket

152043278
0000500428580: RNCC: 3 | RNVC: 2
(241)A39630000500428580: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-118-2020
Angle Bracket

151182020
60138273: RNCC: 3 | RNVC: 2

22 Apr 1994

5340-15-005-0523
Angle Bracket

150050523
0-33392: RNCC: 3 | RNVC: 2

7 Sep 1977

5340-15-073-8913
Flush Lock

150738913
13A65X110-3LEVE: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-005-0465
Angle Bracket

150050465
0-33040: RNCC: 3 | RNVC: 2

7 Sep 1977

5340-15-001-7899
Mounting Bracket

150017899
5949783473: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-207-4184
Rod End Clevis

152074184
551018: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-15-111-7997
Angle Bracket

151117997
MF010259: RNCC: 3 | RNVC: 2

1 Jul 1990

5340-15-206-9498
Retaining Band

152069498
183795: RNCC: 3 | RNVC: 2
183795: RNCC: 3 | RNVC: 2
(241)AD751183795: RNCC: 5 | RNVC: 2

31 Jul 2012

5340-15-105-8979
Spring Tension Clip

151058979
10007309: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-152-1045
Angle Bracket

151521045
60131190: RNCC: 3 | RNVC: 2

7 Aug 2000

5340-15-121-3504
Access Cover

151213504
60149475: RNCC: 3 | RNVC: 2

22 Nov 1995

5340-15-152-3523
Retaining Strap

151523523
0-167888: RNCC: 3 | RNVC: 2
00167888: RNCC: 3 | RNVC: 2
(241)A39630-167888: RNCC: 5 | RNVC: 2
1PA39630-167888: RNCC: 5 | RNVC: 2

4 Sep 2000

5340-15-139-4741
Angle Bracket

151394741
4836177: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-109-4002
Rod End Connector

151094002
5147-008-02: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-118-0909
Valve Seat

151180909
D0489293: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-198-7937
Expansion Shield

151987937
60188802: RNCC: 3 | RNVC: 2

17 Nov 2004

5340-15-119-0821
Expansion Plug

151190821
70928244: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-179-0681
Mounting Plate

151790681
E250-509F: RNCC: 3 | RNVC: 2
E250-509F: RNCC: 5 | RNVC: 9

20 Apr 2006

5340-15-009-1461
Bow Handle

150091461
751957: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-110-5640
Vent Plug

151105640
287680: RNCC: 2 | RNVC: 2
1P 287680: RNCC: 3 | RNVC: 2
1P 287680: RNCC: 5 | RNVC: 9
287680: RNCC: 5 | RNVC: 9

6 Apr 1996

5340-15-124-4534
Angle Bracket

151244534
92506304: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-162-6383
Mounting Plate

151626383
595357: RNCC: 3 | RNVC: 2

7 Dec 2001

5340-15-045-0378
Screw Thread Insert

150450378
3200-03: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-107-8758
Angle Bracket

151078758
60112276: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-155-1007
Rod End Clevis

151551007
142010543: RNCC: 3 | RNVC: 2

18 Jan 2002

5340-15-177-4312
Mechanical Stop

151774312
050949: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-207-4002
Bridge Clamp

152074002
500347691: RNCC: 3 | RNVC: 2
0028206: RNCC: 5 | RNVC: 2
0028206: RNCC: 5 | RNVC: 2

10 Oct 2012

5340-15-001-6009
Mounting Bracket

150016009
42566669: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-149-1127
Angle Bracket

151491127
60177847: RNCC: 3 | RNVC: 2

2 Dec 1998

5340-15-139-7540
Spring Tension Clip

151397540
0007293: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-112-3466
Handle Grip

151123466
93809965: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-112-3484
Retaining Strap

151123484
4837098: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-003-1309
Cover Retainer

150031309
5949791052: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-180-1468
Mounting Plate

151801468
120020367: RNCC: 3 | RNVC: 2

15 Feb 2008

5340-15-145-0648
Retaining Strap

151450648
105.761: RNCC: 3 | RNVC: 2

7 Apr 1997

5340-15-003-5111
Angle Bracket

150035111
4509605: RNCC: 3 | RNVC: 2
4509605: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-054-9690
Access Door Hinge

150549690
206-1015-56-18: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-153-9413
Angle Bracket

151539413
142058183: RNCC: 2 | RNVC: 3

12 Mar 2001

5340-15-139-3924
Angle Bracket

151393924
42491686: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-120-4513
Angle Bracket

151204513
142520159: RNCC: 3 | RNVC: 2

25 May 1995

5340-15-120-4451
Mending Plate

151204451
142506101: RNCC: 3 | RNVC: 2

25 May 1995

5340-15-118-7549
Retaining Strap

151187549
9434756: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-009-4496
Clamping Catch

150094496
026202283100: RNCC: 5 | RNVC: 2
026202283100: RNCC: 5 | RNVC: 9

19 Jun 1980

5340-15-148-6025
Angle Bracket

151486025
B515MVL015: RNCC: 3 | RNVC: 2

8 Sep 1998

5340-15-111-7999
Angle Bracket

151117999
032210/3: RNCC: 3 | RNVC: 2

1 Jul 1990

Load More Results