What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 24 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 24 of 72

5340-15-002-6555
Access Cover

150026555
DIALRRC: RNCC: 3 | RNVC: 2

17 Sep 2013

5340-15-199-5771
Door Handle

151995771
ART.3841: RNCC: 3 | RNVC: 2

2 May 2005

5340-15-178-4251
Loop Clamp

151784251
RAK-5926/02: RNCC: 3 | RNVC: 2

31 May 2005

5340-15-157-9311
Loop Clamp

151579311
0-103840: RNCC: 3 | RNVC: 2
(241)A39630-103840: RNCC: 5 | RNVC: 2
1PA39630-103840: RNCC: 5 | RNVC: 2

25 Nov 2003

5340-15-187-2025
Mounting Bracket

151872025
SC 100 653: RNCC: 3 | RNVC: 2
(241)A3980SC100653: RNCC: 5 | RNVC: 2

24 Feb 2009

5340-15-178-6519
Mounting Plate

151786519
2231.061.0004: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-003-8989
Mounting Plate

150038989
182741238: RNCC: 3 | RNVC: 2
(241)A0199182741238: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-003-1519
Angle Bracket

150031519
5949788641: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-109-2030
Retaining Strap

151092030
10115590: RNCC: 3 | RNVC: 2

23 Feb 1989

5340-15-161-0632
Angle Bracket

151610632
F720151741: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-065-4093
Handle Grip

150654093
4970504: RNCC: 3 | RNVC: 2
4970504: RNCC: 5 | RNVC: 2

24 Jul 1983

5340-15-198-4263
Access Cover

151984263
162505270: RNCC: 3 | RNVC: 2

27 Sep 2004

5340-15-168-9311
Coat And Hat Hook

151689311
F72000339: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-004-4270
Retaining Strap

150044270
68158-101A1: RNCC: 3 | RNVC: 2

14 Apr 1978

5340-15-148-1422
Support Hook

151481422
4A00111N01: RNCC: 3 | RNVC: 2
93192962: RNCC: 5 | RNVC: 2

22 Jun 1998

5340-15-062-9066
Retaining Strap

150629066
0-55646: RNCC: 3 | RNVC: 2

9 Jul 1981

5340-15-178-6306
Mounting Bracket

151786306
M381T: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-200-7971
Retaining Bail

152007971
SO1-6: RNCC: 3 | RNVC: 2
(241)A5393SO1-6: RNCC: 5 | RNVC: 2

1 Mar 2006

5340-15-107-3936
Loop Clamp

151073936
10450390: RNCC: 3 | RNVC: 2

11 Apr 1986

5340-15-155-9266
Loop Clamp

151559266
18089193: RNCC: 3 | RNVC: 2

7 Oct 2002

5340-15-156-0256
Protection Bellows

151560256
164819277: RNCC: 3 | RNVC: 2
(241)A0199164819277: RNCC: 5 | RNVC: 2

11 Nov 2002

5340-15-002-6000
Bow Handle

150026000
138126: RNCC: 3 | RNVC: 2
91823343: RNCC: 5 | RNVC: 2

4 Sep 2013

5340-15-118-4012
Angle Bracket

151184012
60159862: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-006-4591
Access Cover

150064591
0152.120.009.00: RNCC: 3 | RNVC: 2

13 Dec 2013

5340-15-161-2473
Rod End Clevis

151612473
59061142: RNCC: 3 | RNVC: 2
59061142: RNCC: 5 | RNVC: 2

11 Oct 2000

5340-15-118-4482
Support Hook

151184482
60153246: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-121-7824
Rod End Clevis

151217824
79100794: RNCC: 3 | RNVC: 2

19 Feb 1996

5340-15-109-8875
Tubular Fairlead

151098875
475833: RNCC: 3 | RNVC: 2
D0475833: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-054-7049
Compression Cup

150547049
6115253: RNCC: 3 | RNVC: 2
6115253: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-120-3552
Angle Bracket

151203552
60146216: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-206-9433
Control Rod

152069433
102726009: RNCC: 3 | RNVC: 2
(241)A0199102726009: RNCC: 5 | RNVC: 2

31 Jul 2012

5340-15-063-5978
Retaining Strap

150635978
1386915: RNCC: 3 | RNVC: 2
1386915: RNCC: 5 | RNVC: 9

13 Nov 1982

5340-15-113-8417
Handle Grip

151138417
48204100000: RNCC: 3 | RNVC: 2
93155314: RNCC: 5 | RNVC: 2

17 Mar 1992

5340-15-158-6132
Casement Fastener

151586132
122607950: RNCC: 3 | RNVC: 2

10 Mar 2004

5340-15-137-1802
Handle Grip

151371802
47-721-036-1: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-158-7178
Access Cover

151587178
504077369: RNCC: 3 | RNVC: 2

29 Mar 2004

5340-15-007-2045
Angle Bracket

150072045
1374494: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-109-4628
Angle Bracket

151094628
1R 561639: RNCC: 3 | RNVC: 2
1R 561639: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-103-0011
Rod End Clevis

151030011
79027076: RNCC: 3 | RNVC: 2

21 Jun 1987

5340-15-119-0132
Angle Bracket

151190132
70603156: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-074-3307
Retaining Strap

150743307
A16UNAV1046A37UN1743: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-150-9070
Spring Holder

151509070
45060033A: RNCC: 3 | RNVC: 2

27 Mar 2000

5340-15-001-2269
Eye Hook

150012269
36N007P104: RNCC: 3 | RNVC: 2

4 Jun 2013

5340-15-160-4518
Angle Bracket

151604518
F720105571: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-103-1116
Spring Tension Clip

151031116
L3630083: RNCC: 3 | RNVC: 2
(241)A5015DE160.03.232: RNCC: 5 | RNVC: 2
DE160.03.232: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-117-5924
Mending Plate

151175924
41CDP561: RNCC: 3 | RNVC: 2

4 Nov 1994

5340-15-149-8165
Access Cover

151498165
129088: RNCC: 3 | RNVC: 2
0052460: RNCC: 5 | RNVC: 2

2 Jun 1999

5340-15-060-2897
Screw Thread Insert

150602897
1376-31-267: RNCC: 3 | RNVC: 2
137631267: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-107-2182
Angle Bracket

151072182
301364G1: RNCC: 3 | RNVC: 2

27 Oct 1988

5340-15-201-2962
Stand Base

152012962
122621307: RNCC: 3 | RNVC: 2

20 Jul 2006

5340-15-060-2530
Rod End Clevis

150602530
5029-5: RNCC: 3 | RNVC: 2

7 Dec 1976

5340-15-100-9263
Butt Hinge Leaf

151009263
808-41052-4: RNCC: 3 | RNVC: 2

1 May 1987

5340-15-119-1974
Access Cover

151191974
75222153: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-155-1234
Retaining Bail

151551234
142038173: RNCC: 2 | RNVC: 3

18 Jan 2002

5340-15-071-7540
Handle Grip

150717540
57B: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-201-6963
Casement Fastener

152016963
1235: RNCC: 3 | RNVC: 2

20 Nov 2006

5340-15-200-5391
Spring Tension Clip

152005391
1188.151-01: RNCC: 3 | RNVC: 2
(241)A30931188.151-01: RNCC: 5 | RNVC: 2

29 Jan 2006

5340-15-064-8207
Angle Bracket

150648207
1397276: RNCC: 3 | RNVC: 2

27 Apr 1983

5340-15-104-4373
Expansion Plug

151044373
10158600: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-001-5979
Mending Plate

150015979
42566685: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-116-7103
Vent Plug

151167103
DOR0117157: RNCC: 3 | RNVC: 2

2 Feb 1994

5340-15-160-8227
Coat And Hat Hook

151608227
C800002041: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-181-3692
Metal Grille

151813692
2C1144IS0028: RNCC: 3 | RNVC: 2
(241)A29802C1144IS0028: RNCC: 5 | RNVC: 2

10 Dec 2008

5340-15-110-5716
Plain Solid Disk

151105716
1Q 528227: RNCC: 3 | RNVC: 2
1Q 528227: RNCC: 5 | RNVC: 9

29 Apr 1993

5340-15-178-5503
Mounting Plate

151785503
2231.029.0002: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-169-1270
Coat And Hat Hook

151691270
F72006709: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-118-4497
Angle Bracket

151184497
60154197: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-064-8077
Angle Bracket

150648077
60124000: RNCC: 3 | RNVC: 2

17 Nov 1983

5340-15-108-1676
Spring Holder

151081676
1576-18-198: RNCC: 3 | RNVC: 2
157618198: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-003-1411
Mounting Bracket

150031411
5949792830: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-156-3437
Clamping Catch

151563437
(241)A53042368L02.1 AK: RNCC: 3 | RNVC: 2
2368L02.1 AK: RNCC: 3 | RNVC: 2

30 Jan 2003

5340-15-110-7162
Retaining Strap

151107162
69567-001A00: RNCC: 3 | RNVC: 2
69567-001: RNCC: 5 | RNVC: 2

25 Jul 1990

5340-15-109-3930
Plain Solid Disk

151093930
5137-347-05: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-116-9050
Key Holder

151169050
D035064: RNCC: 3 | RNVC: 2
D035064: RNCC: 5 | RNVC: 2

10 Jan 1994

5340-15-121-6176
Mounting Plate

151216176
80A044996: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-149-3322
Expansion Plug

151493322
60141151: RNCC: 3 | RNVC: 2
142043154: RNCC: 8 | RNVC: 2

28 Jan 1999

5340-15-155-3315
Support Hook

151553315
98445229: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-15-053-0670
Screw Thread Insert

150530670
26T038P021: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-178-7652
Mounting Plate

151787652
023572: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-179-6977
Angle Bracket

151796977
0000500409137: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-153-5158
Access Cover

151535158
121122110: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-108-5687
Butt Hinge Leaf

151085687
93919447: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-197-8148
Mounting Plate

151978148
0001142: RNCC: 3 | RNVC: 2
(241)A40420001142: RNCC: 5 | RNVC: 2

10 May 2004

5340-15-058-6938
Handle Grip

150586938
1127-44-120: RNCC: 3 | RNVC: 2
AF 106-03C-113: RNCC: 5 | RNVC: 2

20 Jan 1973

5340-15-216-1577
Door Closer

152161577
47621: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-201-2942
Stand Base

152012942
162530266: RNCC: 3 | RNVC: 2

20 Jul 2006

5340-15-207-4563
Padlock

152074563
1 21010 50 0: RNCC: 3 | RNVC: 2
(241)A3319121010500: RNCC: 5 | RNVC: 2

11 Oct 2012

5340-15-055-6190
Angle Bracket

150556190
699168: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-119-5617
Mending Plate

151195617
4881447: RNCC: 3 | RNVC: 2

19 Sep 1994

5340-15-151-4857
Hand Crank

151514857
NAMT0000300: RNCC: 3 | RNVC: 2

30 May 2000

5340-15-151-9987
Angle Bracket

151519987
60120180: RNCC: 3 | RNVC: 2

31 Jul 2000

5340-15-116-3333
Retaining Strap

151163333
759916: RNCC: 3 | RNVC: 2

22 Apr 1993

5340-15-179-9899
Door Handle

151799899
2599027: RNCC: 3 | RNVC: 2

16 Nov 2007

5340-15-205-2553
Rod End Connector

152052553
504380140: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-121-0602
Screw Thread Insert

151210602
M5(X0.8)X2D-ACC.INOX18/8AUST.PAS: RNCC: 3 | RNVC: 2
210602564: RNCC: 5 | RNVC: 2

21 Sep 1995

5340-15-194-0063
Mounting Bracket

151940063
109-0601-79-160: RNCC: 3 | RNVC: 2

12 Aug 2010

5340-15-064-9007
Clip Retainer Plate

150649007
154651: RNCC: 3 | RNVC: 2

6 Mar 1984

5340-15-045-4273
Rod End Clevis

150454273
N0R5-222-01: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-150-7078
Bail Handle

151507078
IR.412/80 S-20: RNCC: 3 | RNVC: 2

20 Dec 1999

5340-15-116-7779
Loop Clamp

151167779
D50-COMP40: RNCC: 3 | RNVC: 2

21 Apr 1994

5340-15-103-8210
Retaining Strap

151038210
07631-101B1: RNCC: 3 | RNVC: 2
07631-101B00: RNCC: 5 | RNVC: 2

1 Feb 1988

5340-15-007-4975
Mending Plate

150074975
1239-01-149: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-007-3289
Mending Plate

150073289
1137-08-123: RNCC: 3 | RNVC: 2

27 Oct 1979

5340-15-109-1811
Retaining Strap

151091811
1372527: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-152-6477
Flush Catch

151526477
A186A063S279A: RNCC: 3 | RNVC: 2

9 Oct 2000

5340-15-178-7673
Access Cover

151787673
040117: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-162-2412
Access Cover

151622412
131875: RNCC: 3 | RNVC: 2
E5140320: RNCC: 5 | RNVC: 2

17 May 2001

5340-15-109-1801
Retaining Strap

151091801
60105594: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-059-7103
Angle Bracket

150597103
315-0038-01: RNCC: 3 | RNVC: 2

10 Apr 1975

5340-15-051-2513
Angle Bracket

150512513
TM492332-1288: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-199-4940
Access Cover

151994940
312782F01: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-15-059-3592
Retaining Strap

150593592
1127-32-245: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-002-3375
Protection Bellows

150023375
OP05-006-008+OP05-006-007: RNCC: 3 | RNVC: 2
OP05-006-008+OP05-006-007: RNCC: 5 | RNVC: 2

12 Aug 2013

5340-15-045-2710
Retaining Ring

150452710
N0R2-140-00-10I: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-189-2595
Access Cover

151892595
391400109: RNCC: 3 | RNVC: 2
0391400109: RNCC: 5 | RNVC: 2

10 Feb 2010

5340-15-169-3273
Coat And Hat Hook

151693273
F72010628: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-168-9990
Coat And Hat Hook

151689990
F72004634: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-178-7499
Mounting Bracket

151787499
013066AA: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-170-4469
Retaining Strap

151704469
109-0310-27-198: RNCC: 3 | RNVC: 2

16 Jan 2003

5340-15-007-1957
Retaining Strap

150071957
1392692: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-150-1059
Mounting Bracket

151501059
120015300: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-111-4191
Angle Bracket

151114191
329164G1: RNCC: 3 | RNVC: 2
329164G1: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-194-0029
Access Cover

151940029
109-0343-92-107: RNCC: 3 | RNVC: 2

12 Aug 2010

5340-15-115-4781
Angle Bracket

151154781
260-04-124-61-11: RNCC: 3 | RNVC: 2
260-04-124-61-11: RNCC: 5 | RNVC: 9

29 Nov 1992

5340-15-157-0578
Mounting Plate

151570578
229390: RNCC: 3 | RNVC: 2

28 Apr 2003

5340-15-109-1213
Plug Button

151091213
4434614: RNCC: 3 | RNVC: 2

30 Apr 1988

5340-15-154-0200
Loop Clamp

151540200
73202A074002: RNCC: 5 | RNVC: 2
73202A074002: RNCC: 5 | RNVC: 9

15 Mar 2001

5340-15-196-8412
Barrel Bolt

151968412
PN UAS 00041405: RNCC: 3 | RNVC: 2
5340F76034685: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-178-4053
Mounting Bracket

151784053
137609024: RNCC: 3 | RNVC: 2

31 May 2005

5340-15-109-2220
Tubular Fairlead

151092220
729667-0001: RNCC: 3 | RNVC: 2

29 Aug 1989

5340-15-148-4109
Angle Bracket

151484109
129-0615-64-103: RNCC: 3 | RNVC: 2

10 Aug 1998

5340-15-006-8958
Rod End Clevis

150068958
39A506-33-02A: RNCC: 3 | RNVC: 2

2 Jan 1979

5340-15-008-0770
Angle Bracket

150080770
60114026: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-107-1849
Screw Thread Insert

151071849
RS404114: RNCC: 3 | RNVC: 2

24 May 1989

5340-15-193-9215
Retaining Strap

151939215
109-0641-43-151: RNCC: 3 | RNVC: 2

28 Jul 2010

5340-15-062-4641
Bow Handle

150624641
A00602-01-20: RNCC: 3 | RNVC: 2
A00602-01-20: RNCC: 5 | RNVC: 2

31 Mar 1982

5340-15-114-3541
Angle Bracket

151143541
5176-265-01: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-15-155-4253
Bow Handle

151554253
GN27091: RNCC: 3 | RNVC: 2

20 Mar 2002

5340-15-117-4207
Mending Plate

151174207
132507158: RNCC: 3 | RNVC: 2

4 Oct 1993

5340-15-020-2211
Leather Strap

150202211
01-231M88: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-008-4586
Plug Button

150084586
4329768: RNCC: 3 | RNVC: 2
4329768: RNCC: 5 | RNVC: 9

29 Sep 1980

5340-15-179-6755
Mounting Plate

151796755
0000500408267: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-177-3791
Mounting Plate

151773791
030503: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-202-9129
Control Rod

152029129
60181759: RNCC: 3 | RNVC: 2
(241)A424960181759: RNCC: 5 | RNVC: 2

8 Jun 2011

5340-15-067-9299
Catch Strike

150679299
24136-101: RNCC: 3 | RNVC: 2

3 Mar 1986

5340-15-100-7630
Access Door Hinge

151007630
109-0640-49-34: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-15-107-2509
Handle Grip

151072509
2544-61: RNCC: 3 | RNVC: 2
2544-000061: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-121-0856
Vent Plug

151210856
SF070-POLIP: RNCC: 3 | RNVC: 2

22 Dec 1995

5340-15-147-7688
Angle Bracket

151477688
611-0097: RNCC: 3 | RNVC: 2

6 Apr 1998

5340-15-000-2397
Loop Clamp

150002397
TZ5288/C3: RNCC: 3 | RNVC: 2

11 Feb 2013

5340-15-199-6850
Protection Bellows

151996850
99459739: RNCC: 3 | RNVC: 2
(241)A424999459739: RNCC: 5 | RNVC: 2

17 May 2005

5340-15-118-3382
Angle Bracket

151183382
60143594: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-063-3202
Retaining Strap

150633202
60104903: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-068-7678
Angle Bracket

150687678
270767A2: RNCC: 3 | RNVC: 2

14 Jun 1985

5340-15-003-9132
Mounting Plate

150039132
182741340: RNCC: 3 | RNVC: 2
(241)A0199182741340: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-193-1930
Protection Bellows

151931930
FREMMZW117: RNCC: 3 | RNVC: 2

20 Apr 2010

5340-15-118-7551
Retaining Strap

151187551
9434761: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-116-4781
Mending Plate

151164781
60160810: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-195-9078
Caster Wheel

151959078
83G.GF080000: RNCC: 3 | RNVC: 2
(241)A765483G.GF080000: RNCC: 5 | RNVC: 2

25 May 2011

5340-15-064-0665
Handle Grip

150640665
I301-65XMB: RNCC: 3 | RNVC: 2
I301-65XM8: RNCC: 5 | RNVC: 2

19 Sep 1983

5340-15-008-1196
Rod End Clevis

150081196
A1-10302-751: RNCC: 3 | RNVC: 2
A1-10302-751: RNCC: 5 | RNVC: 9

22 Apr 1981

5340-15-062-9079
Rod End Clevis

150629079
0-100005: RNCC: 3 | RNVC: 2

28 Aug 1981

5340-15-001-2268
Eye Hook

150012268
36N006P205: RNCC: 3 | RNVC: 2

4 Jun 2013

5340-15-197-5536
Retaining Band

151975536
PN UAS 00047626: RNCC: 3 | RNVC: 2
4730F76037683: RNCC: 5 | RNVC: 9

8 Apr 2004

5340-15-197-5418
Door Closer

151975418
PN UAS 00022884: RNCC: 3 | RNVC: 2
5340F76009544: RNCC: 5 | RNVC: 9

8 Apr 2004

5340-15-153-3130
Mending Plate

151533130
122621210: RNCC: 2 | RNVC: 3

13 Dec 2000

5340-15-045-3559
Loop Clamp

150453559
740-13-06: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-002-2782
Catch Strike

150022782
504379539: RNCC: 3 | RNVC: 2

2 Aug 2013

5340-15-152-7856
Mounting Bracket

151527856
P120610: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-110-5747
Vent Plug

151105747
525689: RNCC: 2 | RNVC: 2
1P 525689: RNCC: 3 | RNVC: 2
1P 525689: RNCC: 5 | RNVC: 9
525689: RNCC: 5 | RNVC: 9

12 Oct 1996

5340-15-007-2542
Angle Bracket

150072542
1380457: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-102-0796
Butt Hinge Leaf

151020796
213A7195-001: RNCC: 3 | RNVC: 2

29 Jul 1988

5340-15-116-7777
Loop Clamp

151167777
D32-COMP38: RNCC: 3 | RNVC: 2

21 Apr 1994

5340-15-070-9440
Retaining Strap

150709440
F333A1-287: RNCC: 3 | RNVC: 2
F333A1-287: RNCC: 5 | RNVC: 2

1 Mar 1978

5340-15-061-5736
Angle Bracket

150615736
P-135243-001: RNCC: 3 | RNVC: 2
P135243-001: RNCC: 5 | RNVC: 2

6 Feb 1978

5340-15-115-5343
Handle Grip

151155343
I.222/40 NR.10: RNCC: 3 | RNVC: 2
D0569851: RNCC: 5 | RNVC: 2

6 Jun 1994

5340-15-151-9401
Angle Bracket

151519401
0-173958: RNCC: 3 | RNVC: 2
00173958: RNCC: 3 | RNVC: 2
(241)A39630-173958: RNCC: 5 | RNVC: 2

26 Jul 2000

5340-15-118-9654
Access Cover

151189654
75206880: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-148-6518
Loop Clamp

151486518
M6: RNCC: 3 | RNVC: 2
190519112: RNCC: 5 | RNVC: 2

17 Sep 1998

5340-15-195-2149
Mounting Bracket

151952149
219937228: RNCC: 3 | RNVC: 2
219937228: RNCC: 5 | RNVC: 2
CV173706: RNCC: 5 | RNVC: 2

7 Mar 2011

5340-15-133-9262
Angle Bracket

151339262
4622782: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-001-8363
Mounting Bracket

150018363
5949786597: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-005-3560
Loop Clamp

150053560
1-04416-90: RNCC: 3 | RNVC: 2
1-04416-90: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-062-7907
Mending Plate

150627907
0-34156: RNCC: 3 | RNVC: 2

28 Aug 1982

5340-15-007-4256
Angle Bracket

150074256
P-110258-004: RNCC: 3 | RNVC: 2
P110258-004: RNCC: 5 | RNVC: 2

12 Mar 1980

5340-15-196-8461
Tee Hinge

151968461
PN UAS 00041581: RNCC: 3 | RNVC: 2
5340F76034847: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-194-8893
Mounting Bracket

151948893
STB-300PW: RNCC: 3 | RNVC: 2
STB-300PW: RNCC: 3 | RNVC: 2
(241)A8460STB-300PW: RNCC: 5 | RNVC: 2

31 Jan 2011

5340-15-198-7856
Mending Plate

151987856
4789122: RNCC: 3 | RNVC: 2

17 Nov 2004

5340-15-101-8755
Plain Solid Disk

151018755
DOR0108029: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-221-2595
Handle Grip

152212595
IMPUGNATURA-A: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-196-6200
Rim Lock Set

151966200
PN UAS 00039833: RNCC: 3 | RNVC: 2
5340F76033928: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-179-6879
Mounting Bracket

151796879
0000500401596: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-114-4412
Loop Clamp

151144412
4849436: RNCC: 3 | RNVC: 2

12 Jun 1992

5340-15-007-1893
Retaining Strap

150071893
1387640: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-179-4309
Loop Clamp

151794309
14.12.69.00: RNCC: 3 | RNVC: 2

28 Nov 2006

5340-15-003-1324
Mounting Bracket

150031324
5949791409: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-178-6313
Mounting Bracket

151786313
M378T: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-060-2425
Loop Clamp

150602425
41: RNCC: 3 | RNVC: 2

16 Sep 1980

5340-15-064-5888
Loop Clamp

150645888
60100619: RNCC: 3 | RNVC: 2

17 Nov 1983

5340-15-195-8997
Mounting Bracket

151958997
TAK-5471/01: RNCC: 3 | RNVC: 2

24 May 2011

5340-15-180-0585
Clamping Catch

151800585
013.043: RNCC: 3 | RNVC: 2
AI-6210: RNCC: 5 | RNVC: 2

19 Dec 2007

5340-15-150-5409
Bow Handle

151505409
341-8164/03: RNCC: 3 | RNVC: 2

30 Nov 1999

5340-15-114-2492
Mending Plate

151142492
8243.10.01: RNCC: 3 | RNVC: 2

12 May 1993

5340-15-113-7359
Retaining Strap

151137359
8121463: RNCC: 3 | RNVC: 2

17 Feb 1992

5340-15-178-6308
Access Cover

151786308
M0370S: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-178-9212
Mounting Bracket

151789212
TS022MD003AA00: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-15-157-6330
Mounting Bracket

151576330
11030311: RNCC: 3 | RNVC: 2
(241)A977211030311: RNCC: 5 | RNVC: 2

9 Oct 2003

5340-15-178-1153
Access Cover

151781153
541BA170A09-001: RNCC: 3 | RNVC: 2

14 Feb 2005

5340-15-118-0880
Handle Grip

151180880
I.150/25: RNCC: 3 | RNVC: 2

20 Dec 1994

5340-15-054-0779
Loop Clamp

150540779
260-13-100-01: RNCC: 3 | RNVC: 2
260-13-100-01: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-151-7289
Bridge Clamp

151517289
0-179124: RNCC: 3 | RNVC: 2

4 Jul 2000

5340-15-118-3667
Mending Plate

151183667
60142934: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-113-1470
Butt Hinge

151131470
311A2954-001: RNCC: 3 | RNVC: 2

7 Oct 1990

5340-15-107-1425
Screw Thread Insert

151071425
IM22BM4: RNCC: 3 | RNVC: 2
7-210091405: RNCC: 5 | RNVC: 2

23 Feb 1995

5340-15-117-8860
Screw Thread Insert

151178860
1182-20542: RNCC: 3 | RNVC: 2

28 Jan 1994

5340-15-008-7311
Screw Thread Insert

150087311
1376-64-418: RNCC: 3 | RNVC: 2
137664418: RNCC: 5 | RNVC: 2

5 Apr 1994

5340-15-178-7430
Protection Bellows

151787430
033884: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-178-6473
Mounting Plate

151786473
2231.072.0002: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-118-3404
Loop Clamp

151183404
60141884: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-001-8213
Mounting Bracket

150018213
5949788964: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-177-3676
Bridge Clamp

151773676
015741BB: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-120-3323
Loop Clamp

151203323
88728: RNCC: 3 | RNVC: 2
93163992: RNCC: 5 | RNVC: 2
88728: RNCC: 5 | RNVC: 9

30 Mar 1995

5340-15-064-2044
Screw Thread Insert

150642044
590-962-304: RNCC: 3 | RNVC: 2
590.962.304: RNCC: 5 | RNVC: 2
590.962.304: RNCC: 5 | RNVC: 2

6 Dec 1983

5340-15-051-7720
Handle Grip

150517720
45-3432-11: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-060-6392
Mending Plate

150606392
27172-101: RNCC: 3 | RNVC: 2

29 Jun 1977

5340-15-005-4463
Retaining Band

150054463
92887-001: RNCC: 3 | RNVC: 2

1 Mar 1979

5340-15-197-5562
Door Hook And Eye

151975562
PN UAS 00047518: RNCC: 3 | RNVC: 2
5315F76037593: RNCC: 5 | RNVC: 9

8 Apr 2004

5340-15-153-9884
Spring Tension Clip

151539884
2354000130: RNCC: 3 | RNVC: 2

14 Mar 2001

5340-15-057-4232
Angle Bracket

150574232
C247064C: RNCC: 5 | RNVC: 2
C247064C: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-149-4551
Cushioning Pad

151494551
1087.009: RNCC: 3 | RNVC: 2

10 Mar 1999

5340-15-155-2765
Mending Plate

151552765
60174543: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-15-150-9800
Hook Handle

151509800
369-09098-103: RNCC: 3 | RNVC: 2

17 Feb 2000

5340-15-062-7361
Webbing Strap

150627361
CL809.01: RNCC: 3 | RNVC: 2

29 Nov 1980

5340-15-152-7990
Mounting Bracket

151527990
P200611: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-151-1911
Mounting Bracket

151511911
FL2S0021300: RNCC: 3 | RNVC: 2

14 Apr 2000

5340-15-001-1098
Mounting Bracket

150011098
5801355589: RNCC: 3 | RNVC: 2

31 May 2013

5340-15-179-6423
Mending Plate

151796423
98153346: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-112-3470
Retaining Strap

151123470
60148921: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-150-7875
Mounting Bracket

151507875
00012359: RNCC: 3 | RNVC: 2

24 Jan 2000

5340-15-186-9074
Plug Button

151869074
049261: RNCC: 3 | RNVC: 2
0028529: RNCC: 5 | RNVC: 2

5 Jan 2009

5340-15-153-3080
Butt Hinge

151533080
122606430: RNCC: 2 | RNVC: 3

13 Dec 2000

5340-15-001-8359
Mounting Bracket

150018359
5949783542: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-121-6701
Mounting Bracket

151216701
800071736: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-062-7937
Retaining Strap

150627937
0-34188: RNCC: 3 | RNVC: 2

28 Aug 1982

5340-15-220-6594
Tubular Fairlead

152206594
09606: RNCC: 3 | RNVC: 2
(241)A553609606: RNCC: 5 | RNVC: 2

16 Nov 2005

5340-15-178-7437
Mounting Plate

151787437
039916: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-149-7763
Retaining Strap

151497763
534306-1: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-15-120-0236
Retaining Band

151200236
10007309: RNCC: 3 | RNVC: 2

5 Dec 1994

5340-15-118-3622
Angle Bracket

151183622
60141076: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-107-5086
Loop Clamp

151075086
8792732: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-118-3420
Loop Clamp

151183420
60145852: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-151-6999
Loop Clamp

151516999
4774442: RNCC: 3 | RNVC: 2

3 Jul 2000

5340-15-054-8758
Handle Grip

150548758
32-03-383: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-195-2159
Mounting Plate

151952159
773317034: RNCC: 3 | RNVC: 2
773317034: RNCC: 5 | RNVC: 2
CV173744: RNCC: 5 | RNVC: 2

7 Mar 2011

5340-15-104-4361
Expansion Plug

151044361
260-8990-07: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-109-4871
Mending Plate

151094871
1Z 586608: RNCC: 3 | RNVC: 2
1Z 586608: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-169-1507
Coat And Hat Hook

151691507
F72006966: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-231-8924
Handle Grip

152318924
45483381: RNCC: 3 | RNVC: 2
254015E106516: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-205-3034
Access Cover

152053034
112713045: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-118-7031
Access Cover

151187031
73128960: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-007-1958
Retaining Strap

150071958
1393367: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-119-0203
Angle Bracket

151190203
70670740: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-139-4571
Angle Bracket

151394571
4749240: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-179-0828
Rigid Caster

151790828
22/A 150X35: RNCC: 3 | RNVC: 2

13 Jun 2006

5340-15-202-4515
Luggage Lock

152024515
1620/4: RNCC: 3 | RNVC: 2
(241)A52001620/4: RNCC: 5 | RNVC: 2

25 Mar 2007

5340-15-118-9123
Loop Clamp

151189123
70639314: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-004-2594
Retaining Strap

150042594
1387058: RNCC: 3 | RNVC: 2
1387058: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-002-3016
Block Clamp

150023016
1376-18-861: RNCC: 3 | RNVC: 2

5 Aug 2013

5340-15-118-4436
Angle Bracket

151184436
60154190: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-157-6422
Block Clamp

151576422
AIT13901EEE5790: RNCC: 3 | RNVC: 2

12 Oct 2003

5340-15-178-4827
Access Cover

151784827
504014662: RNCC: 3 | RNVC: 2
A043021-036: RNCC: 5 | RNVC: 2

1 Jul 2005

5340-15-105-2174
Mending Plate

151052174
38812911: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-004-0543
Butt Hinge Leaf

150040543
1137-19-206: RNCC: 3 | RNVC: 2

30 May 1977

5340-15-201-9275
Retaining Band

152019275
BMM 2025: RNCC: 3 | RNVC: 2
(241)A9260BMM 2025: RNCC: 5 | RNVC: 2

15 Jan 2007

5340-15-204-3601
Snap Hook

152043601
25920022: RNCC: 3 | RNVC: 2
(241)ACA6425920022: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-006-5984
Retaining Strap

150065984
4233014: RNCC: 3 | RNVC: 2
4233014: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-179-6058
Mechanical Stop

151796058
93803992: RNCC: 3 | RNVC: 9

11 Apr 2007

5340-15-119-3854
Catch Strike

151193854
60170776: RNCC: 3 | RNVC: 2
(241)A424960170776: RNCC: 5 | RNVC: 2

25 Jul 1994

5340-15-108-7235
Angle Bracket

151087235
60138063: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-119-5667
Retaining Strap

151195667
4881249: RNCC: 3 | RNVC: 2

19 Sep 1994

5340-15-118-4592
Mending Plate

151184592
60153136: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-163-7034
Angle Bracket

151637034
409666: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-119-4021
Angle Bracket

151194021
60172256: RNCC: 3 | RNVC: 2

25 Jul 1994

5340-15-009-8756
Rod End Clevis

150098756
1/00085/71: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-152-9487
Stand Base

151529487
48050000039/2: RNCC: 3 | RNVC: 2

9 Nov 2000

5340-15-207-3485
Filler Opening Cap

152073485
CSE21SWCCC: RNCC: 3 | RNVC: 2

9 Oct 2012

5340-15-204-3156
Mounting Bracket

152043156
WM3942800030: RNCC: 3 | RNVC: 2

24 Oct 2011

5340-15-195-4737
Mounting Bracket

151954737
AMOM06070: RNCC: 3 | RNVC: 2
(241)AA045AMOM06070: RNCC: 5 | RNVC: 2

29 Mar 2011

5340-15-150-7812
Loop Clamp

151507812
00010187: RNCC: 3 | RNVC: 2

24 Jan 2000

5340-15-060-6074
Retaining Strap

150606074
62654-101A1: RNCC: 3 | RNVC: 2

16 Jun 1977

5340-15-120-3798
Swivel Caster

151203798
SKK/125: RNCC: 3 | RNVC: 2

7 Apr 1995

5340-15-109-3793
Angle Bracket

151093793
5137-290-16: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-065-4998
Rod End Clevis

150654998
42010481: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-117-2597
Angle Bracket

151172597
132506941: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-15-113-1378
Retaining Strap

151131378
311A3756-001: RNCC: 3 | RNVC: 2

7 Oct 1990

5340-15-005-2677
Retaining Strap

150052677
0-34061: RNCC: 3 | RNVC: 2

28 Aug 1978

5340-15-148-1904
Pipe Hanger

151481904
555912014000: RNCC: 3 | RNVC: 2

1 Jul 1998

5340-15-008-1664
Screw Thread Insert

150081664
A04-10095-048: RNCC: 5 | RNVC: 2
A04-10095-048: RNCC: 5 | RNVC: 9
A04-10095-048: RNCC: 5 | RNVC: 9

10 May 1981

5340-15-110-0300
Rod End Connector

151100300
05222-001: RNCC: 3 | RNVC: 2

21 Feb 1990

5340-15-118-2642
Loop Clamp

151182642
D1408970: RNCC: 3 | RNVC: 2

11 Apr 1995

5340-15-116-4949
Rim Latch

151164949
9057263: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-180-0774
Mounting Bracket

151800774
1P 605185: RNCC: 3 | RNVC: 2

28 Jan 2008

5340-15-120-0252
Catch Strike

151200252
70240536: RNCC: 3 | RNVC: 2

5 Dec 1994

5340-15-003-1342
Angle Bracket

150031342
5949791773: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-005-5103
Retaining Strap

150055103
4392375: RNCC: 3 | RNVC: 2
4392375: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-203-8532
Snap Hook

152038532
RICAM1911: RNCC: 3 | RNVC: 2
(241)A4114RICAM1911: RNCC: 5 | RNVC: 2

7 Jul 2011

5340-15-187-3094
Retaining Band

151873094
UZ154: RNCC: 3 | RNVC: 2
(241)A9410UZ154: RNCC: 5 | RNVC: 2

11 Mar 2009

5340-15-116-3449
Plain Solid Disk

151163449
190515210: RNCC: 3 | RNVC: 2

27 Apr 1993

5340-15-008-0704
Angle Bracket

150080704
1387716: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-007-2415
Loop Clamp

150072415
4500824: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-122-0611
Mounting Plate

151220611
238BE390-6: RNCC: 3 | RNVC: 2

23 Apr 1996

5340-15-194-0069
Mounting Bracket

151940069
109-0605-46-101: RNCC: 3 | RNVC: 2

12 Aug 2010

5340-15-119-0993
Angle Bracket

151190993
73060178: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-207-8717
Access Cover

152078717
504375056: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-111-7991
Angle Bracket

151117991
031330/6: RNCC: 3 | RNVC: 2

1 Jul 1990

5340-15-197-1750
Rim Lock Set

151971750
PN UAS 00036899: RNCC: 3 | RNVC: 2
5340F76031817: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-122-0096
Angle Bracket

151220096
60179929: RNCC: 3 | RNVC: 2

10 Apr 1996

5340-15-178-7219
Block Clamp

151787219
1421729: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-121-5400
Access Cover

151215400
132521902: RNCC: 3 | RNVC: 2

15 Jan 1996

5340-15-177-3804
Mounting Plate

151773804
031984: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-202-2595
Loop Clamp

152022595
504104707: RNCC: 3 | RNVC: 2
(241)A4249504104707: RNCC: 5 | RNVC: 2

19 Feb 2007

5340-15-103-6680
Angle Bracket

151036680
24009306A: RNCC: 3 | RNVC: 2

26 Nov 1987

5340-15-007-6985
Mending Plate

150076985
1141-39-164: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-204-7182
Mounting Bracket

152047182
ICA-PLB 104B: RNCC: 3 | RNVC: 2
(241)AH245ICA-PLB104B: RNCC: 5 | RNVC: 2

15 Dec 2011

5340-15-007-4991
Mending Plate

150074991
1139-04-107: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-149-8841
Plain Solid Disk

151498841
90X7: RNCC: 3 | RNVC: 2

22 Jul 1999

5340-15-118-3403
Loop Clamp

151183403
60142121: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-062-7942
Angle Bracket

150627942
0-34194: RNCC: 3 | RNVC: 2

28 Aug 1982

5340-15-112-4076
Access Cover

151124076
DOR0114669: RNCC: 3 | RNVC: 2

2 Nov 1995

5340-15-109-8793
Retaining Strap

151098793
4802545: RNCC: 3 | RNVC: 2

15 Oct 1988

5340-15-178-3705
Access Cover

151783705
230225004: RNCC: 3 | RNVC: 2

29 Apr 2005

5340-15-134-8009
Handle Grip

151348009
U29498A: RNCC: 3 | RNVC: 2
U29498A: RNCC: 5 | RNVC: 9

9 Oct 1996

5340-15-148-4503
Mechanical Stop

151484503
5060909440: RNCC: 3 | RNVC: 2

11 Aug 1998

5340-15-001-5818
Eye Hook

150015818
42566662: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-118-9769
Loop Clamp

151189769
300.21017.5: RNCC: 3 | RNVC: 2
300.21017.5: RNCC: 5 | RNVC: 2

4 Jul 1994

5340-15-187-6293
Mounting Bracket

151876293
99463669: RNCC: 3 | RNVC: 2

15 Apr 2009

5340-15-116-8458
Spring Holder

151168458
469494: RNCC: 3 | RNVC: 2
D0469494: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-15-164-2581
Angle Bracket

151642581
4849668: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-009-2845
Angle Bracket

150092845
191-0105-01: RNCC: 3 | RNVC: 2

2 Jan 1980

5340-15-120-3399
Loop Clamp

151203399
S205-3-029-03: RNCC: 3 | RNVC: 2
S205-3-029-03: RNCC: 5 | RNVC: 9

3 Apr 1995

5340-15-064-1683
Loop Clamp

150641683
587332006V: RNCC: 3 | RNVC: 2

21 Feb 1983

5340-15-001-3359
Mounting Bracket

150013359
504380900: RNCC: 3 | RNVC: 2

17 Jun 2013

5340-15-060-6075
Retaining Strap

150606075
62657-101A1: RNCC: 3 | RNVC: 2

16 Jun 1977

5340-15-107-1051
Spring Holder

151071051
301-01-1320: RNCC: 3 | RNVC: 2

14 Apr 1987

5340-15-122-2139
Loop Clamp

151222139
800050454: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-187-2039
Mounting Bracket

151872039
SC 100 666: RNCC: 3 | RNVC: 2
(241)A3980SC100666: RNCC: 5 | RNVC: 2

24 Feb 2009

5340-15-176-2702
Handle Grip

151762702
AMZ.D: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-007-2181
Angle Bracket

150072181
1393357: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-060-1410
Mending Plate

150601410
550: RNCC: 3 | RNVC: 2
1026-14-164: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-102-5968
Angle Bracket

151025968
203429: RNCC: 3 | RNVC: 2

18 Feb 1994

5340-15-118-7526
Mounting Bracket

151187526
9434285: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-156-1796
Loop Clamp

151561796
17765591: RNCC: 3 | RNVC: 2

11 Dec 2002

5340-15-202-3610
Screw Thread Insert

152023610
DDEF2738-04: RNCC: 3 | RNVC: 2

28 Feb 2007

5340-15-100-5061
Leather Strap

151005061
000900249400: RNCC: 5 | RNVC: 2
000900249400: RNCC: 5 | RNVC: 9

22 Apr 1987

5340-15-179-6774
Angle Bracket

151796774
0000500403015: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-057-6485
Retaining Strap

150576485
204-7701-50-1: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-118-3859
Mending Plate

151183859
60161526: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-045-2937
Loop Clamp

150452937
N0R2-505-06-35B: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-059-2673
Butt Hinge Leaf

150592673
260-05-02-17: RNCC: 3 | RNVC: 2
260-05-02-17: RNCC: 5 | RNVC: 9

18 Nov 1975

5340-15-108-5206
Retaining Strap

151085206
60126977: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-073-8905
Flush Lock

150738905
13A65X45-3LEVE: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-156-7436
Detent Plunger

151567436
V029205: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-15-003-9070
Mounting Plate

150039070
182741028: RNCC: 3 | RNVC: 2
(241)A0199182741028: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-178-7501
Pawl Fastener

151787501
041684: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-109-0073
Butt Hinge Leaf

151090073
1394579: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-154-2255
Lever Bracket

151542255
60180920: RNCC: 3 | RNVC: 2

28 Mar 2001

5340-15-193-6499
Handle Grip

151936499
163111153: RNCC: 3 | RNVC: 2
46501: RNCC: 3 | RNVC: 2
163111153: RNCC: 5 | RNVC: 2
(241)A0199163111153: RNCC: 5 | RNVC: 2
(241)A077446501: RNCC: 5 | RNVC: 2
5340PL1035202: RNCC: 6 | RNVC: 9

28 Jun 2010

5340-15-200-6404
Butt Hinge

152006404
385524: RNCC: 3 | RNVC: 2

14 Feb 2006

5340-15-121-9913
Loop Clamp

151219913
60178741: RNCC: 3 | RNVC: 2

4 Apr 1996

5340-15-109-3802
Mending Plate

151093802
5137-290-20: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-175-2126
Loop Clamp

151752126
920-0308/01: RNCC: 3 | RNVC: 2
(241)A4582920-0308/01: RNCC: 5 | RNVC: 2

12 Feb 2004

5340-15-005-4567
Handle Grip

150054567
1137-15-126: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-108-6305
Screw Thread Insert

151086305
1/35258/70: RNCC: 3 | RNVC: 2
13525870: RNCC: 5 | RNVC: 2

30 Mar 1988

5340-15-118-0934
Loop Clamp

151180934
D0484591: RNCC: 3 | RNVC: 2

20 Dec 1994

5340-15-118-9244
Angle Bracket

151189244
73154949: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-118-3642
Angle Bracket

151183642
60142734: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-188-7194
Butt Hinge

151887194
3548317M1: RNCC: 3 | RNVC: 2

2 Nov 2009

5340-15-152-8063
Mounting Bracket

151528063
P140100: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-207-4185
Rod End Clevis

152074185
551022: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-15-179-1762
T Bracket

151791762
RS 417 876 A: RNCC: 3 | RNVC: 2

13 Jun 2006

5340-15-199-5055
Stand Base

151995055
162505280: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-15-120-5548
Handle Grip

151205548
109-0710-20-5: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-15-001-0294
Bow Handle

150010294
504376106: RNCC: 3 | RNVC: 2

15 May 2013

5340-15-122-1855
Screw Thread Insert

151221855
M6(X1)1D: RNCC: 3 | RNVC: 2
M6(X1)X1D: RNCC: 3 | RNVC: 2
210002535: RNCC: 5 | RNVC: 2

11 Jun 1996

5340-15-007-2221
Angle Bracket

150072221
1398153: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-155-3046
Mending Plate

151553046
60185578: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-15-050-5291
Strap Fastener Loop

150505291
03-605B11: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-116-3459
Spring Tension Clip

151163459
802620100: RNCC: 3 | RNVC: 2

28 Apr 1993

5340-15-157-9324
Door Handle

151579324
0-110314: RNCC: 3 | RNVC: 2
(241)A39630-110314: RNCC: 5 | RNVC: 2
1PA39630-110314: RNCC: 5 | RNVC: 2

25 Nov 2003

5340-15-163-0041
Plug Button

151630041
999-5001-10-197: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-15-060-8039
Retaining Strap

150608039
000200367550: RNCC: 5 | RNVC: 2
1200096-100000006: RNCC: 5 | RNVC: 2
000200367550: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-157-6739
Loop Clamp

151576739
11031920: RNCC: 3 | RNVC: 2
(241)A977211031920: RNCC: 5 | RNVC: 2

15 Oct 2003

5340-15-150-6014
Mending Plate

151506014
103486: RNCC: 3 | RNVC: 2
(241)A3963103486: RNCC: 5 | RNVC: 2

6 Dec 1999

5340-15-109-1497
Rigid Caster

151091497
33.5021: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-15-118-7961
Expansion Plug

151187961
14328501: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-005-4581
Handle Grip

150054581
1137-05-226: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-152-0218
Loop Clamp

151520218
0-173240: RNCC: 3 | RNVC: 2
00173240: RNCC: 3 | RNVC: 2
(241)A39630-173240: RNCC: 5 | RNVC: 2
1PA39630-173240: RNCC: 5 | RNVC: 2

2 Aug 2000

5340-15-149-5860
Mounting Plate

151495860
109-0326-26-103: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-122-3023
Mounting Plate

151223023
73130890: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-120-3398
Access Door Hinge

151203398
S205-1-063-11: RNCC: 3 | RNVC: 2
S205-1-063-11: RNCC: 5 | RNVC: 9

3 Apr 1995

5340-15-150-5894
Butt Hinge

151505894
A35791-02-20: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-15-109-0170
Loop Clamp

151090170
60112681: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-152-7407
Mounting Bracket

151527407
3051T2670: RNCC: 3 | RNVC: 2
20512670: RNCC: 3 | RNVC: 2
(241)A361820512670: RNCC: 4 | RNVC: 1
3051G2670: RNCC: 5 | RNVC: 2

20 Oct 2000

5340-15-154-1433
Angle Bracket

151541433
0-115054: RNCC: 3 | RNVC: 2
(241)A39630-115054: RNCC: 5 | RNVC: 2
1PA39630-115054: RNCC: 5 | RNVC: 2

22 Mar 2001

5340-15-195-8131
Mounting Bracket

151958131
380048: RNCC: 3 | RNVC: 2
(241)AJ611380048: RNCC: 5 | RNVC: 2

16 May 2011

5340-15-199-9633
Loop Clamp

151999633
93158797: RNCC: 3 | RNVC: 2

28 Jul 2005

5340-15-062-7363
Webbing Strap

150627363
CL833.10: RNCC: 3 | RNVC: 2

29 Nov 1980

5340-15-177-4117
Mounting Bracket

151774117
045803: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-112-3528
Butt Hinge Leaf

151123528
60148776: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-008-0771
Angle Bracket

150080771
60113920: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-007-7366
Spring Tension Clip

150077366
4709287: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-007-2217
Retaining Strap

150072217
1397795: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-119-5005
Mending Plate

151195005
142503141: RNCC: 3 | RNVC: 2

19 Aug 1994

5340-15-063-3270
Retaining Strap

150633270
60118621: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-179-7421
Angle Bracket

151797421
0000500400472: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-051-3254
Retaining Strap

150513254
4521080: RNCC: 3 | RNVC: 2
4521080: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-188-7657
Drift Bolt

151887657
MOR35366150CH: RNCC: 3 | RNVC: 2
(241)AG622MOR35366150CH: RNCC: 5 | RNVC: 2

13 Nov 2009

5340-15-119-0190
Angle Bracket

151190190
70666312: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-045-3577
Loop Clamp

150453577
740-20-22: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-002-3110
Mounting Bracket

150023110
504376966: RNCC: 3 | RNVC: 2

6 Aug 2013

5340-15-206-9207
Butt Hinge

152069207
AW002HB01D1NR: RNCC: 3 | RNVC: 2
(241)A0126AW002HB01D1NR: RNCC: 5 | RNVC: 2

26 Jul 2012

5340-15-187-7553
Bridge Clamp

151877553
99458586: RNCC: 3 | RNVC: 2

6 May 2009

5340-15-116-2307
Screw Thread Insert

151162307
M3(X0,5)X1,5D: RNCC: 3 | RNVC: 2
210602531: RNCC: 5 | RNVC: 2

19 May 1999

5340-15-118-3415
Loop Clamp

151183415
60143730: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-204-4877
Mounting Bracket

152044877
219937234: RNCC: 3 | RNVC: 2
219937234: RNCC: 5 | RNVC: 2
CV173707: RNCC: 5 | RNVC: 2

7 Nov 2011

5340-15-057-4387
Retaining Band

150574387
204-9000-20-2: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-041-1141
Retaining Ring

150411141
6-0599-1-00-32367: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-157-5346
Loop Clamp

151575346
11222-12: RNCC: 2 | RNVC: 3

19 Sep 2003

5340-15-001-0288
Mounting Bracket

150010288
504375828: RNCC: 3 | RNVC: 2

15 May 2013

5340-15-203-6519
Mounting Bracket

152036519
01594: RNCC: 3 | RNVC: 2

24 Jun 2011

5340-15-107-0545
Bridge Clamp

151070545
4229500: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-148-3553
Angle Bracket

151483553
150148: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-109-5452
Bow Handle

151095452
K10501003: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-153-3888
Access Cover

151533888
5137-311-03: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-006-8081
Plain Solid Disk

150068081
411-12-51-06: RNCC: 3 | RNVC: 2

21 Apr 1976

5340-15-064-2038
Screw Thread Insert

150642038
590-962-401: RNCC: 3 | RNVC: 2
590.962.401: RNCC: 5 | RNVC: 2
590.962.401: RNCC: 5 | RNVC: 2

6 Dec 1983

5340-15-006-4843
Mounting Bracket

150064843
PR6020: RNCC: 3 | RNVC: 2
(241)A8681PR6020: RNCC: 5 | RNVC: 2

16 Dec 2013

5340-15-001-8240
Mounting Bracket

150018240
5949784968: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-001-5544
Access Cover

150015544
182719048: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-15-063-0972
Retaining Strap

150630972
8954870: RNCC: 3 | RNVC: 2

15 Jun 1982

5340-15-153-5209
Access Cover

151535209
142041817: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-180-0387
Mounting Bracket

151800387
40G1027000: RNCC: 3 | RNVC: 2

16 Nov 2007

5340-15-060-8593
Bow Handle

150608593
250-001-310: RNCC: 3 | RNVC: 2
250.001.310: RNCC: 5 | RNVC: 2
250.001.310: RNCC: 5 | RNVC: 2

29 Jun 1977

5340-15-162-2102
Mounting Bracket

151622102
011.039: RNCC: 3 | RNVC: 2

17 May 2001

5340-15-065-7282
Angle Bracket

150657282
109-0363-03-3: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-15-001-5597
Mounting Bracket

150015597
504381645: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-100-5477
Loop Clamp

151005477
9047: RNCC: 3 | RNVC: 2

28 Aug 1983

5340-15-062-9259
Retaining Strap

150629259
0-101917: RNCC: 3 | RNVC: 2

28 Aug 1981

5340-15-110-1409
Rod End Connector

151101409
05224-001A1: RNCC: 3 | RNVC: 2

21 Feb 1990

5340-15-062-1325
Bail Handle

150621325
3-21797D11C: RNCC: 5 | RNVC: 2
3-21797D11C: RNCC: 5 | RNVC: 9

6 Dec 1980

5340-15-007-3116
Hand Crank

150073116
01TC20828: RNCC: 3 | RNVC: 2

10 Apr 1980

5340-15-199-4647
Block Clamp

151994647
A464A001A: RNCC: 3 | RNVC: 2
(241)A0126A464A001A: RNCC: 5 | RNVC: 2

12 Apr 2005

5340-15-001-7898
Mounting Bracket

150017898
5949788889: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-074-3993
Retaining Strap

150743993
7UNI2137: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-203-1469
Latch Bar

152031469
212-1300-38-5: RNCC: 3 | RNVC: 2

27 Nov 2007

5340-15-103-0707
Angle Bracket

151030707
DE013.12.886: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-103-5073
Rod End Clevis

151035073
808-82573-9: RNCC: 3 | RNVC: 2

9 Apr 1988

5340-15-051-3250
Retaining Strap

150513250
4508729: RNCC: 3 | RNVC: 2
4508729: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-102-1543
Rod End Connector

151021543
SAKB8F: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-147-0810
Strap Hinge

151470810
51255: RNCC: 3 | RNVC: 2

21 Aug 1997

5340-15-195-1654
Mounting Plate

151951654
613R.091: RNCC: 3 | RNVC: 2

4 Mar 2011

5340-15-181-1737
Loop Clamp

151811737
178940200: RNCC: 3 | RNVC: 2
(241)A0199178940200: RNCC: 5 | RNVC: 2

5 Nov 2008

5340-15-109-1265
Angle Bracket

151091265
60124955: RNCC: 3 | RNVC: 2

30 Apr 1988

5340-15-007-2842
Angle Bracket

150072842
1397453: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-102-0344
Plain Solid Disk

151020344
0902T01: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-051-1131
Retaining Strap

150511131
72-067-410: RNCC: 3 | RNVC: 2
72-067-410: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-058-6953
Loop Clamp

150586953
AF106-05B6: RNCC: 3 | RNVC: 2

11 Mar 1975

5340-15-158-5982
Screw Thread Insert

151585982
210802705: RNCC: 3 | RNVC: 2

9 Mar 2004

5340-15-151-4863
Elastic Strap

151514863
UOHX0090000: RNCC: 3 | RNVC: 2

30 May 2000

5340-15-200-7973
Retaining Bail

152007973
SO 1-10: RNCC: 3 | RNVC: 2
(241)A5393SO 1-10: RNCC: 5 | RNVC: 2

1 Mar 2006

5340-15-121-4693
Angle Bracket

151214693
834715-10: RNCC: 3 | RNVC: 2
834715-10: RNCC: 5 | RNVC: 9

21 Dec 1995

5340-15-154-2093
Angle Bracket

151542093
0-169114: RNCC: 3 | RNVC: 2
(241)A39630-169114: RNCC: 5 | RNVC: 2
1PA39630-169114: RNCC: 5 | RNVC: 2

28 Mar 2001

5340-15-121-7101
Screw Thread Insert

151217101
A0410095131: RNCC: 5 | RNVC: 2
A0410095131: RNCC: 5 | RNVC: 9
A0410095131: RNCC: 5 | RNVC: 9

6 Feb 1996

5340-15-192-5023
Mending Plate

151925023
99574800: RNCC: 3 | RNVC: 2
(241)AE04999574800: RNCC: 5 | RNVC: 2

22 Mar 2010

5340-15-144-7927
Metal Grille

151447927
GRG-AP1500: RNCC: 3 | RNVC: 2

24 Jan 1997

5340-15-179-3105
Flush Lock

151793105
C202.20.00: RNCC: 3 | RNVC: 2
MM-20: RNCC: 3 | RNVC: 2

16 Oct 2006

5340-15-108-5220
Handle Grip

151085220
008122856: RNCC: 3 | RNVC: 2
8122856: RNCC: 3 | RNVC: 2
8998518104: RNCC: 3 | RNVC: 2
0-111918: RNCC: 4 | RNVC: 1
111918: RNCC: 4 | RNVC: 1
008122856: RNCC: 5 | RNVC: 2
1PA39630-111918: RNCC: 5 | RNVC: 2
(241)A3963111918: RNCC: 5 | RNVC: 2

14 Jun 1988

5340-15-089-5803
Butt Hinge

150895803
16956-075: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-064-0605
Angle Bracket

150640605
60115096: RNCC: 3 | RNVC: 2

6 May 1983

5340-15-153-2596
Handle Grip

151532596
122606909: RNCC: 2 | RNVC: 3

12 Dec 2000

5340-15-109-8767
Retaining Strap

151098767
60131744: RNCC: 3 | RNVC: 2

15 Oct 1988

5340-15-107-2830
Mending Plate

151072830
74040: RNCC: 2 | RNVC: 2

20 Apr 1994

5340-15-118-3378
Angle Bracket

151183378
60144025: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-106-3729
Handle Grip

151063729
42050526: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-194-0044
Rod End Clevis

151940044
109-0030-25-101: RNCC: 3 | RNVC: 2

12 Aug 2010

5340-15-156-3614
Hook Handle

151563614
CBD71413G01: RNCC: 3 | RNVC: 2
(241)A3460CBD71413G01: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-157-4990
Angle Bracket Set

151574990
20EK002: RNCC: 3 | RNVC: 2
(241)A166720EK002: RNCC: 5 | RNVC: 2

5 Sep 2003

5340-15-124-5834
Angle Bracket

151245834
181467270: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-121-7949
Access Cover

151217949
142512100: RNCC: 3 | RNVC: 2

21 Feb 1996

5340-15-063-5966
Retaining Strap

150635966
5941010: RNCC: 3 | RNVC: 2
5941010: RNCC: 5 | RNVC: 9

13 Nov 1982

5340-15-109-1264
Angle Bracket

151091264
60114306: RNCC: 3 | RNVC: 2

30 Apr 1988

5340-15-050-2723
Angle Bracket

150502723
50040103: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-200-0589
Caster Wheel

152000589
13HJ04643008S01-801-30: RNCC: 3 | RNVC: 2

19 Sep 2005

5340-15-101-8921
Mending Plate

151018921
1P279443: RNCC: 3 | RNVC: 2
1P279443: RNCC: 5 | RNVC: 9

25 Nov 1992

5340-15-068-8359
Butt Hinge Leaf

150688359
66-6487-7: RNCC: 3 | RNVC: 2

6 Oct 1986

5340-15-158-5452
Access Cover

151585452
121210129: RNCC: 3 | RNVC: 2

9 Mar 2004

5340-15-054-8048
Rod End Clevis

150548048
32-03-138: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-150-6264
Mounting Plate

151506264
S7258-W6035-S1: RNCC: 3 | RNVC: 2

15 Dec 1999

5340-15-106-7617
Trigger Guard

151067617
4517536: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-152-8992
Angle Bracket

151528992
203429F01: RNCC: 3 | RNVC: 2

7 Nov 2000

Load More Results