What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 23 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 23 of 72

5340-15-001-5262
Mechanical Stop

150015262
GN.35084: RNCC: 3 | RNVC: 2

10 Jul 2013

5340-15-178-7726
Mounting Plate

151787726
018346: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-118-3391
Angle Bracket

151183391
60145494: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-111-9257
Angle Bracket

151119257
60110583: RNCC: 3 | RNVC: 2

10 Sep 1989

5340-15-116-4773
Butt Hinge Leaf

151164773
60149746: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-163-3881
Loop Clamp

151633881
9475979: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-060-9477
Mending Plate

150609477
F430C1C9-4: RNCC: 3 | RNVC: 2
F430C1C9-4: RNCC: 5 | RNVC: 2

20 May 1977

5340-15-001-7868
Mounting Bracket

150017868
500400787: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-102-9579
Butt Hinge Leaf

151029579
808-41051-4: RNCC: 3 | RNVC: 2

23 Aug 1988

5340-15-156-8099
Mounting Bracket

151568099
11GJ04343219S01-407: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-15-113-1456
Retaining Strap

151131456
266A0141-001: RNCC: 3 | RNVC: 2

7 Oct 1990

5340-15-063-3160
Catch Strike

150633160
60113556: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-009-9761
Spring Holder

150099761
1236-09-178: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-179-8774
Access Cover

151798774
C7271W177N1.01: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-147-5297
Access Cover

151475297
A131566-1: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-15-058-6742
Recess Handle

150586742
1971-49-80T60: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-195-4798
Expansion Shield

151954798
42728650: RNCC: 3 | RNVC: 2
(241)ACA6442728650: RNCC: 5 | RNVC: 2

29 Mar 2011

5340-15-116-8483
Vent Plug

151168483
SF40-1/2INGAS: RNCC: 3 | RNVC: 2
D0569556: RNCC: 5 | RNVC: 2

23 Feb 1994

5340-15-006-3080
Angle Bracket

150063080
P-732550-001: RNCC: 3 | RNVC: 2
P732550-001: RNCC: 5 | RNVC: 2

24 Nov 1979

5340-15-119-0776
Loop Clamp

151190776
70927387: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-207-8356
Loop Clamp

152078356
3617.019: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-149-3121
Angle Bracket

151493121
4885963: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-007-1887
Retaining Strap

150071887
1386438: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-149-2881
Access Cover

151492881
4857400: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-202-8456
Mounting Bracket

152028456
9.3040.0392.A: RNCC: 3 | RNVC: 2
(241)A92169.3040.0392.A: RNCC: 5 | RNVC: 2

23 Jul 2007

5340-15-064-3998
Loop Clamp

150643998
4381511: RNCC: 3 | RNVC: 2
(7001)5340150643998: RNCC: 5 | RNVC: 2

6 May 1983

5340-15-195-2179
Mounting Bracket

151952179
209714110: RNCC: 3 | RNVC: 2
209714110: RNCC: 5 | RNVC: 2
CV173671: RNCC: 5 | RNVC: 2

7 Mar 2011

5340-15-205-4152
Rim Latch

152054152
2 0197-408: RNCC: 3 | RNVC: 2
(241)S34652 0197-408: RNCC: 5 | RNVC: 2

8 Mar 2012

5340-15-051-3160
Loop Clamp

150513160
1-04195-05: RNCC: 3 | RNVC: 2
10419505: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-058-7713
Rod End Clevis

150587713
205-8-342-11: RNCC: 3 | RNVC: 2
205-8-342-11: RNCC: 5 | RNVC: 9

17 Apr 1975

5340-15-003-1377
Cover Retainer

150031377
5949791050: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-005-6841
Retaining Ring

150056841
0154: RNCC: 3 | RNVC: 2

14 Jun 1979

5340-15-178-2520
Access Cover

151782520
9903905019: RNCC: 3 | RNVC: 2

29 Apr 2005

5340-15-151-6647
Retaining Strap

151516647
4702417: RNCC: 3 | RNVC: 2

22 Jun 2000

5340-15-206-2875
Mounting Bracket

152062875
ED0088362280-S: RNCC: 3 | RNVC: 2

1 Jun 2012

5340-15-203-9514
Plain Solid Disk

152039514
389.1803.0000: RNCC: 3 | RNVC: 2
(241)AF479389.1803.0000: RNCC: 5 | RNVC: 2

29 Jul 2011

5340-15-162-4064
Loop Clamp

151624064
3630.038: RNCC: 3 | RNVC: 2

16 Aug 2001

5340-15-117-8441
Mending Plate

151178441
503003: RNCC: 3 | RNVC: 2
P209211560821062: RNCC: 5 | RNVC: 2

28 Jan 1994

5340-15-060-2398
Angle Bracket

150602398
727123M: RNCC: 3 | RNVC: 2

16 Sep 1980

5340-15-116-8632
Loop Clamp

151168632
D1402140: RNCC: 3 | RNVC: 2

8 Apr 1994

5340-15-100-5059
Leather Strap

151005059
000900249300: RNCC: 5 | RNVC: 2
000900249300: RNCC: 5 | RNVC: 9

22 Apr 1987

5340-15-045-3479
Loop Clamp

150453479
714-12-22: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-052-1281
Retaining Strap

150521281
26-6-20-29: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-118-3392
Loop Clamp

151183392
60141401: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-178-5815
Catch Strike

151785815
205-032-703-1: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-117-4737
Spring Holder

151174737
077248-100674: RNCC: 3 | RNVC: 2

30 May 1994

5340-15-206-8053
Loop Clamp

152068053
ED0036301130-S: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-200-7974
Retaining Bail

152007974
SO 1-12: RNCC: 3 | RNVC: 2
(241)A5393SO 1-12: RNCC: 5 | RNVC: 2

1 Mar 2006

5340-15-162-3599
Loop Clamp

151623599
D1218688: RNCC: 3 | RNVC: 2

16 Jul 2001

5340-15-001-8260
Mounting Bracket

150018260
5949788711: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-005-1925
Rod End Clevis

150051925
1376660: RNCC: 3 | RNVC: 2
1376660: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-000-1912
Mounting Bracket

150001912
SKY20: RNCC: 3 | RNVC: 2

8 Feb 2013

5340-15-002-1479
Butt Hinge

150021479
42566941: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-189-3781
Retaining Band

151893781
71055-7: RNCC: 3 | RNVC: 2
(241)AJ12071055-7: RNCC: 5 | RNVC: 2

17 Feb 2010

5340-15-207-4182
Retaining Clip

152074182
550910: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-15-148-0433
Expansion Plug

151480433
895.071.780.4: RNCC: 3 | RNVC: 2
111374: RNCC: 5 | RNVC: 2

16 Jun 1998

5340-15-053-0668
Screw Thread Insert

150530668
26T038P016: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-007-2603
Bow Handle

150072603
1386629: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-060-5626
Loop Clamp

150605626
N8710CR5-17: RNCC: 3 | RNVC: 2

20 May 1977

5340-15-168-9941
Coat And Hat Hook

151689941
F72004461: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-109-7160
Plug Button

151097160
4814456: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-118-8613
Access Cover

151188613
299709298Q: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-051-3164
Loop Clamp

150513164
1-04186-05: RNCC: 3 | RNVC: 2
10418605: RNCC: 5 | RNVC: 2
4520551: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-149-1129
Mending Plate

151491129
60179691: RNCC: 3 | RNVC: 2

2 Dec 1998

5340-15-118-3413
Loop Clamp

151183413
60143813: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-153-7243
Loop Clamp

151537243
142030120: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-108-4949
Angle Bracket

151084949
M40ET286A: RNCC: 3 | RNVC: 2

6 Oct 1994

5340-15-118-4547
Retaining Strap

151184547
60156409: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-111-2821
Access Cover

151112821
DOR0101121: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-151-4603
Door Handle

151514603
AF060182500: RNCC: 3 | RNVC: 2

29 May 2000

5340-15-121-7933
Mending Plate

151217933
132506775: RNCC: 3 | RNVC: 2

21 Feb 1996

5340-15-154-4649
Catch Strike

151544649
60162658: RNCC: 3 | RNVC: 2
(241)A424960162658: RNCC: 5 | RNVC: 2
1PA424960162658: RNCC: 8 | RNVC: 2

11 Jun 2001

5340-15-145-3175
Screw Thread Insert

151453175
D1415835: RNCC: 3 | RNVC: 2

15 Dec 1997

5340-15-149-3149
Threaded Rod End

151493149
4886107: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-151-2662
Angle Bracket

151512662
00084973: RNCC: 3 | RNVC: 2

4 May 2000

5340-15-178-7222
Mounting Plate

151787222
1421731: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-119-1527
Mounting Bracket

151191527
73126579: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-154-0251
Angle Bracket

151540251
999-0300-01-402: RNCC: 3 | RNVC: 2

15 Mar 2001

5340-15-066-5122
Plain Solid Disk

150665122
W015683: RNCC: 3 | RNVC: 2

30 May 1985

5340-15-108-5226
Angle Bracket

151085226
60128954: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-188-8087
Retaining Bail

151888087
9930124: RNCC: 3 | RNVC: 2
(241)AD7519930124: RNCC: 5 | RNVC: 2
9930124: RNCC: 5 | RNVC: 2

19 Nov 2009

5340-15-118-4041
Angle Bracket

151184041
60158358: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-187-9611
Door Closer

151879611
011434: RNCC: 3 | RNVC: 2

5 Jun 2009

5340-15-168-9453
Coat And Hat Hook

151689453
F72001843: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-118-3803
Handle Grip

151183803
60159970: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-118-8611
Access Cover

151188611
299709296E: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-068-4331
Cushioning Pad

150684331
G4: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-114-3550
Mending Plate

151143550
5176-265-04: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-15-195-8580
Mounting Bracket

151958580
A2025402373: RNCC: 3 | RNVC: 2
(241)AJ611A2025402373: RNCC: 5 | RNVC: 2

23 May 2011

5340-15-189-3827
Mounting Bracket

151893827
76027006: RNCC: 3 | RNVC: 2

18 Feb 2010

5340-15-002-7840
Loop Clamp

150027840
D200 2.5 INCH: RNCC: 3 | RNVC: 2

2 Oct 2013

5340-15-002-8210
Catch Strike

150028210
5801385251: RNCC: 3 | RNVC: 2

3 Oct 2013

5340-15-051-3249
Retaining Strap

150513249
4553836: RNCC: 3 | RNVC: 2
4553836: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-051-1089
Rod End Clevis

150511089
4-8513-100-26080-3: RNCC: 3 | RNVC: 2
4-8513-1-00-26080-3: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-103-8221
Rod End Clevis

151038221
94467-101A1: RNCC: 3 | RNVC: 2

7 Jun 1988

5340-15-154-0339
Loop Clamp

151540339
0-103926: RNCC: 3 | RNVC: 2
(241)A39630-103926: RNCC: 5 | RNVC: 2
1PA39630-103926: RNCC: 5 | RNVC: 2

15 Mar 2001

5340-15-064-0829
Angle Bracket

150640829
3908.0417: RNCC: 3 | RNVC: 2

7 Sep 1983

5340-15-112-3471
Retaining Strap

151123471
60148922: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-118-4006
Angle Bracket

151184006
60160553: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-109-4688
Angle Bracket

151094688
1Q 553097LA: RNCC: 3 | RNVC: 2
1Q 553097LA: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-109-7265
Screw Thread Insert

151097265
772652: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-119-5571
Retaining Strap

151195571
4881609: RNCC: 3 | RNVC: 2

19 Sep 1994

5340-15-120-3541
Angle Bracket

151203541
60175699: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-118-3631
Angle Bracket

151183631
60140257: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-108-4288
Expansion Plug

151084288
14282370: RNCC: 3 | RNVC: 2

1 Apr 1998

5340-15-193-9341
Retaining Band

151939341
RMEB 002600001: RNCC: 3 | RNVC: 2
(241)AD889RMEB002600001: RNCC: 5 | RNVC: 2

29 Jul 2010

5340-15-002-5410
Bow Handle

150025410
5801388453: RNCC: 3 | RNVC: 2

3 Sep 2013

5340-15-119-0094
Access Cover

151190094
70066751: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-107-5355
Retaining Strap

151075355
SR 2419: RNCC: 3 | RNVC: 2

22 Mar 1988

5340-15-108-7236
Angle Bracket

151087236
60147299: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-147-4162
Mending Plate

151474162
321004400: RNCC: 3 | RNVC: 2

18 Nov 1997

5340-15-199-8523
Mortise Latch Set

151998523
500201658: RNCC: 3 | RNVC: 2
(241)A9172500201658: RNCC: 5 | RNVC: 2

14 Jun 2005

5340-15-118-0749
Spring Holder

151180749
D0467438: RNCC: 3 | RNVC: 2

1 Dec 1994

5340-15-108-7978
Rim Latch

151087978
1395424: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-155-9264
Loop Clamp

151559264
18088693: RNCC: 3 | RNVC: 2

7 Oct 2002

5340-15-152-0613
Retaining Band

151520613
369-09032-105: RNCC: 3 | RNVC: 2

3 Aug 2000

5340-15-109-1926
Retaining Strap

151091926
4734008: RNCC: 3 | RNVC: 2
(7001)5340151091926: RNCC: 5 | RNVC: 2

30 Mar 1988

5340-15-109-7243
Retaining Strap

151097243
60137172: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-007-2636
Angle Bracket

150072636
1390498: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-123-0923
Angle Bracket

151230923
5988695: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-200-7415
Clamping Catch

152007415
504026266: RNCC: 3 | RNVC: 2
(241)A4249504026266: RNCC: 5 | RNVC: 2

21 Feb 2006

5340-15-155-8212
Angle Bracket

151558212
BN175/1: RNCC: 3 | RNVC: 2
42536893: RNCC: 3 | RNVC: 2

10 Jul 2002

5340-15-163-3464
Loop Clamp

151633464
10450190: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-111-7538
Lock-Release Lever

151117538
53033: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-119-1980
Access Cover

151191980
75222193: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-118-9115
Rod End Clevis

151189115
70637541: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-120-0224
Angle Bracket

151200224
79010146: RNCC: 3 | RNVC: 2

5 Dec 1994

5340-15-152-2333
Mounting Plate

151522333
39A510-12-10-25: RNCC: 3 | RNVC: 2

16 Aug 2000

5340-15-050-5289
Strap Fastener Loop

150505289
03-605B32: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-107-2573
Rod End Clevis

151072573
2544-282: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-153-9412
Angle Bracket

151539412
142058175: RNCC: 2 | RNVC: 3

12 Mar 2001

5340-15-204-0994
Mending Plate

152040994
SCH-PESANTE: RNCC: 3 | RNVC: 2

5 Sep 2011

5340-15-109-3732
Mending Plate

151093732
5137-294-22: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-152-8042
Mounting Bracket

151528042
P420217: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-001-7960
Mounting Bracket

150017960
5949784085: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-194-5044
Mounting Bracket

151945044
VCH103058A1: RNCC: 3 | RNVC: 2
(241)A5798VCH103058A1: RNCC: 5 | RNVC: 2

24 Nov 2010

5340-15-148-1862
Butt Hinge

151481862
555908017000: RNCC: 3 | RNVC: 2

1 Jul 1998

5340-15-103-2991
Spring Holder

151032991
56012: RNCC: 3 | RNVC: 2

30 Nov 1986

5340-15-203-6767
Mounting Bracket

152036767
504383622: RNCC: 3 | RNVC: 2

24 Jun 2011

5340-15-001-8300
Bridge Clamp

150018300
98195041: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-105-8964
Spring Tension Clip

151058964
4134615: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-109-7453
Retaining Strap

151097453
42316931: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-175-1593
Access Cover

151751593
COD VL 112-284: RNCC: 3 | RNVC: 2

21 Jan 2004

5340-15-004-8885
Webbing Strap

150048885
204-0900-14-3: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-007-1063
Angle Bracket

150071063
125636: RNCC: 3 | RNVC: 2

24 Nov 1979

5340-15-118-3650
Mending Plate

151183650
60140995: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-179-9561
Angle Bracket

151799561
0000500400939: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-050-9049
Angle Bracket

150509049
945006: RNCC: 3 | RNVC: 2

12 Apr 1978

5340-15-045-3499
Loop Clamp

150453499
722-20-21: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-178-7227
Mounting Bracket

151787227
1421730: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-068-1365
Access Door Hinge

150681365
66170-101: RNCC: 3 | RNVC: 2

26 Mar 1986

5340-15-108-1665
Bridge Clamp

151081665
1576-18-226: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-153-4040
Mending Plate

151534040
5176-231-01: RNCC: 3 | RNVC: 2

11 Jan 2001

5340-15-151-9622
Angle Bracket

151519622
0-173620: RNCC: 3 | RNVC: 2
00173620: RNCC: 3 | RNVC: 2
(241)A39630-173620: RNCC: 5 | RNVC: 2
1PA39630-173620: RNCC: 5 | RNVC: 2

27 Jul 2000

5340-15-151-1540
Door Handle

151511540
MG-AP-1: RNCC: 3 | RNVC: 2

6 Jun 2000

5340-15-202-0329
Mounting Bracket

152020329
74-203383A: RNCC: 3 | RNVC: 2
(241)A331474-203383A: RNCC: 5 | RNVC: 2

24 Jan 2007

5340-15-170-4050
T Bracket

151704050
212-1130-24-119: RNCC: 3 | RNVC: 2

14 Jan 2003

5340-15-109-5748
Loop Clamp

151095748
21610739A: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-144-9526
Plug Button

151449526
14590087: RNCC: 3 | RNVC: 2

24 Feb 1997

5340-15-156-9298
Angle Bracket

151569298
60196000: RNCC: 3 | RNVC: 2

11 Mar 2003

5340-15-157-3315
Expansion Plug

151573315
D0180028A: RNCC: 3 | RNVC: 2

25 Jun 2003

5340-15-002-3070
Flush Catch

150023070
504376189: RNCC: 3 | RNVC: 2

5 Aug 2013

5340-15-008-0573
Rod End Clevis

150080573
60107437: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-073-5229
Rim Lock

150735229
39B55X30: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-199-5059
Spring Tension Clip

151995059
122607637: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-15-100-8806
Roller Holder

151008806
322592G1: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-194-2453
Mechanical Stop

151942453
007.1003: RNCC: 3 | RNVC: 2

19 Oct 2010

5340-15-118-4764
Rod End Clevis

151184764
02.0509.A.04: RNCC: 3 | RNVC: 2
02.0509.A.04: RNCC: 5 | RNVC: 9

6 Feb 1995

5340-15-119-1617
Mounting Bracket

151191617
75208254: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-204-2208
Retaining Clip

152042208
AN309KM: RNCC: 3 | RNVC: 2

3 Oct 2011

5340-15-112-8013
Rod End Clevis

151128013
345A3347-001: RNCC: 3 | RNVC: 2

27 Oct 1990

5340-15-202-3563
Screw Thread Insert

152023563
DDEF2739-04: RNCC: 3 | RNVC: 2

28 Feb 2007

5340-15-118-6515
Retaining Strap

151186515
70683870: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-199-9529
Dashpot Piston

151999529
D72210: RNCC: 3 | RNVC: 2

28 Jul 2005

5340-15-118-4029
Angle Bracket

151184029
60167038: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-179-9049
Mounting Plate

151799049
D1403798: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-195-8559
Mounting Bracket

151958559
A9068200644: RNCC: 3 | RNVC: 2
(241)AJ611A9068200644: RNCC: 5 | RNVC: 2

23 May 2011

5340-15-119-0872
Loop Clamp

151190872
70929703: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-062-7961
Retaining Strap

150627961
0-34396: RNCC: 3 | RNVC: 2

1 Jan 1983

5340-15-206-8223
Mounting Plate

152068223
ED0062751470-S: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-005-8310
Loop Clamp

150058310
NOR2-505-06-28B: RNCC: 3 | RNVC: 2

2 Jan 1979

5340-15-040-1619
Angle Bracket

150401619
1-2552-102-27824: RNCC: 3 | RNVC: 2
1-2552-1-02-27824: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-187-1964
Retaining Band

151871964
069637: RNCC: 3 | RNVC: 2
(241)A3980069637: RNCC: 5 | RNVC: 2

24 Feb 2009

5340-15-074-3986
Retaining Strap

150743986
22UNI2136: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-008-0574
Rod End Clevis

150080574
60107436: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-207-8682
Mounting Plate

152078682
5801345523: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-200-2955
Stand Base

152002955
01831A201420: RNCC: 3 | RNVC: 2

29 Nov 2005

5340-15-073-8764
Rim Lock

150738764
39B100X70CR0MATA: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-152-2493
T Plate

151522493
D22 D829 00P: RNCC: 3 | RNVC: 2

17 Aug 2000

5340-15-153-9068
Mounting Bracket

151539068
00085361: RNCC: 3 | RNVC: 2
(241)A333400085361: RNCC: 4 | RNVC: 1
9536T1: RNCC: 5 | RNVC: 2

9 Mar 2001

5340-15-148-6255
Caster Wheel

151486255
82DIS17.0TAV10: RNCC: 3 | RNVC: 2

15 Sep 1998

5340-15-179-6853
Angle Bracket

151796853
0000500406900: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-199-5248
Chain Bolt

151995248
4868-28028: RNCC: 3 | RNVC: 2
C-LAB-MEC-020: RNCC: 5 | RNVC: 2
(241)AF604CLABMEC020: RNCC: 5 | RNVC: 2

14 Apr 2005

5340-15-073-8909
Flush Lock

150738909
13A65X70-3LEVE: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-199-2398
Loop Clamp

151992398
A708AA05: RNCC: 3 | RNVC: 2
(241)A0126A708AA05: RNCC: 5 | RNVC: 2

20 Feb 2005

5340-15-195-8506
Mounting Bracket

151958506
A6673200073: RNCC: 3 | RNVC: 2
(241)AJ611A6673200073: RNCC: 5 | RNVC: 2

23 May 2011

5340-15-116-4753
Butt Hinge Leaf

151164753
60151180: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-003-9194
Hand Crank

150039194
182742049: RNCC: 3 | RNVC: 2
(241)A0199182742049: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-204-5755
Mounting Bracket

152045755
MNT/LCD/46/S.1032: RNCC: 3 | RNVC: 2
(241)A3028MNT/LCD/46/S.1032: RNCC: 5 | RNVC: 2

22 Nov 2011

5340-15-195-8485
Mounting Bracket

151958485
TAK-5471/02: RNCC: 3 | RNVC: 2

23 May 2011

5340-15-004-1553
Clip Retainer Plate

150041553
P-180168-001: RNCC: 3 | RNVC: 2
P180168-001: RNCC: 5 | RNVC: 2

24 Nov 1979

5340-15-154-2016
Angle Bracket

151542016
0-168235: RNCC: 3 | RNVC: 2
00168235: RNCC: 3 | RNVC: 2
(241)A39630-168235: RNCC: 5 | RNVC: 2
1PA39630-168235: RNCC: 5 | RNVC: 2

28 Mar 2001

5340-15-008-3846
Retaining Strap

150083846
4659218: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-002-6556
Access Cover

150026556
DIALOC: RNCC: 3 | RNVC: 2

17 Sep 2013

5340-15-116-3548
Retaining Strap

151163548
111322106: RNCC: 3 | RNVC: 2

28 Apr 1993

5340-15-059-6809
Rod End Clevis

150596809
04892-101: RNCC: 3 | RNVC: 2

12 May 1976

5340-15-107-5130
Expansion Plug

151075130
7301778: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-007-2212
Angle Bracket

150072212
1397456: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-157-6486
Block Clamp

151576486
AIT13901EGG4939: RNCC: 3 | RNVC: 2

12 Oct 2003

5340-15-207-0791
Mounting Bracket

152070791
109-0315-56-105: RNCC: 3 | RNVC: 2

31 Aug 2012

5340-15-110-0302
Retaining Strap

151100302
20442-102: RNCC: 3 | RNVC: 2

11 Mar 1990

5340-15-151-9424
Angle Bracket

151519424
0-174217: RNCC: 3 | RNVC: 2
00174217: RNCC: 3 | RNVC: 2
(241)A39630-174217: RNCC: 5 | RNVC: 2
1PA39630-174217: RNCC: 5 | RNVC: 2

26 Jul 2000

5340-15-045-3234
Rod End Clevis

150453234
N0R5-225-00-101-138T: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-004-7673
Retaining Strap

150047673
68161-101: RNCC: 3 | RNVC: 2

10 Apr 1978

5340-15-102-6121
Vent Plug

151026121
67563: RNCC: 3 | RNVC: 2

5 Mar 1993

5340-15-109-7234
Angle Bracket

151097234
60140413: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-207-0717
Mending Plate

152070717
M3: RNCC: 3 | RNVC: 2

31 Aug 2012

5340-15-149-3056
Angle Bracket

151493056
4885514: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-118-3663
Mending Plate

151183663
60141404: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-153-5183
Access Cover

151535183
142016208: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-149-3309
Loop Clamp

151493309
17317090: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-180-0390
Mounting Bracket

151800390
40G1060000: RNCC: 3 | RNVC: 2

16 Nov 2007

5340-15-103-6839
Loop Clamp

151036839
31610006A: RNCC: 3 | RNVC: 2

6 Jun 1995

5340-15-001-5543
Access Cover

150015543
182719046: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-15-007-9765
Expansion Plug

150079765
1-01588-01: RNCC: 3 | RNVC: 2
1-01588-01: RNCC: 5 | RNVC: 9

22 Sep 1979

5340-15-001-8431
Mounting Bracket

150018431
500432152: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-161-2230
Mounting Plate

151612230
A-A120718-1/1-1: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-15-205-2617
Flush Lock

152052617
504378904: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-188-7189
Butt Hinge

151887189
3659005M1: RNCC: 3 | RNVC: 2

2 Nov 2009

5340-15-107-1711
Screw Thread Insert

151071711
RS407232: RNCC: 3 | RNVC: 2

24 May 1989

5340-15-002-1408
Access Cover

150021408
42567096: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-003-9191
Control Rod

150039191
182741252: RNCC: 3 | RNVC: 2
(241)A0199182741252: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-198-4260
Access Cover

151984260
122516140: RNCC: 3 | RNVC: 2

27 Sep 2004

5340-15-207-8378
Metal Grille

152078378
6927.493: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-153-9519
Retaining Strap

151539519
142068127: RNCC: 2 | RNVC: 3

12 Mar 2001

5340-15-108-7608
Angle Bracket

151087608
60146251: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-118-6513
Loop Clamp

151186513
70659259: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-115-4785
Angle Bracket

151154785
S205-6-239-25: RNCC: 3 | RNVC: 2
S205-6-239-25: RNCC: 5 | RNVC: 9

29 Nov 1992

5340-15-062-5186
Angle Bracket

150625186
P-190033-001: RNCC: 3 | RNVC: 2
P190033-001: RNCC: 5 | RNVC: 2

11 Jun 1982

5340-15-155-6272
Butt Hinge

151556272
1PA3488PL0000739: RNCC: 3 | RNVC: 2
PL0000739: RNCC: 3 | RNVC: 2

2 May 2002

5340-15-201-4936
Angle Bracket

152014936
N523G5303201: RNCC: 3 | RNVC: 2
(241)A0126N523G5303201: RNCC: 5 | RNVC: 2

3 Oct 2006

5340-15-113-7862
Detent Plunger

151137862
812131020: RNCC: 3 | RNVC: 2

27 Feb 1992

5340-15-195-8619
Access Cover

151958619
A9067500004: RNCC: 3 | RNVC: 2
(241)AJ611A9067500004: RNCC: 5 | RNVC: 2

23 May 2011

5340-15-118-6583
Spring Tension Clip

151186583
73111468: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-117-1954
Angle Bracket

151171954
190516194: RNCC: 3 | RNVC: 2

2 Sep 1993

5340-15-052-5105
Angle Bracket

150525105
T2S96C: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-187-5671
Friction Catch

151875671
TAK-0074/01: RNCC: 3 | RNVC: 2

9 Apr 2009

5340-15-179-9917
Mounting Bracket

151799917
9580500: RNCC: 3 | RNVC: 2

16 Nov 2007

5340-15-121-0618
Screw Thread Insert

151210618
M3(X0.5)X2D: RNCC: 3 | RNVC: 2
210002561: RNCC: 5 | RNVC: 2

21 Sep 1995

5340-15-001-5977
Mounting Bracket

150015977
5801579834: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-180-1478
Mounting Bracket

151801478
120020217: RNCC: 3 | RNVC: 2

15 Feb 2008

5340-15-005-3704
Loop Clamp

150053704
1391708: RNCC: 3 | RNVC: 2
1391708: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-156-1808
Loop Clamp

151561808
18088491: RNCC: 3 | RNVC: 2

11 Dec 2002

5340-15-000-8655
Mounting Bracket

150008655
93828917: RNCC: 3 | RNVC: 2

12 Apr 2013

5340-15-103-0697
Screw Thread Insert

151030697
M4/9508-0412: RNCC: 3 | RNVC: 2
037.40.002: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-003-4617
Angle Bracket

150034617
182713188: RNCC: 3 | RNVC: 2
(241)A0199182713188: RNCC: 5 | RNVC: 2

14 Nov 2013

5340-15-117-4877
Retaining Strap

151174877
06593-103B00: RNCC: 3 | RNVC: 2

27 Oct 1993

5340-15-109-0072
Butt Hinge Leaf

151090072
1395477: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-120-0190
Angle Bracket

151200190
79008811: RNCC: 3 | RNVC: 2

5 Dec 1994

5340-15-116-8638
Mending Plate

151168638
D1402617: RNCC: 3 | RNVC: 2

8 Apr 1994

5340-15-152-0028
Angle Bracket

151520028
60122185: RNCC: 3 | RNVC: 2

31 Jul 2000

5340-15-103-0158
Handle Grip

151030158
587406: RNCC: 3 | RNVC: 2

21 Jun 1987

5340-15-003-3818
Loop Clamp

150033818
ED0036300700-S: RNCC: 3 | RNVC: 2

5 Nov 2013

5340-15-113-5124
Angle Bracket

151135124
V.2587-001: RNCC: 3 | RNVC: 2

27 Aug 1991

5340-15-007-3286
Mending Plate

150073286
1276-23-371: RNCC: 3 | RNVC: 2

27 Oct 1979

5340-15-117-2598
Angle Bracket

151172598
132506942: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-15-118-2012
Loop Clamp

151182012
17316890: RNCC: 3 | RNVC: 2

22 Apr 1994

5340-15-201-0915
Hand Crank

152010915
580950301600: RNCC: 3 | RNVC: 2

22 May 2006

5340-15-005-2834
Retaining Strap

150052834
1391636: RNCC: 3 | RNVC: 2
1391636: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-119-5638
Clamping Catch

151195638
OM06539000: RNCC: 3 | RNVC: 2
60144618: RNCC: 5 | RNVC: 2

19 Sep 1994

5340-15-061-5896
Retaining Strap

150615896
1380227: RNCC: 3 | RNVC: 2
1380227: RNCC: 5 | RNVC: 2
1380227: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-060-8027
Angle Bracket

150608027
000200548700: RNCC: 5 | RNVC: 2
000200548700: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-107-5135
Expansion Plug

151075135
7301025: RNCC: 3 | RNVC: 2
(7001)5340151075135: RNCC: 5 | RNVC: 2

30 Mar 1988

5340-15-148-1421
Bail Handle

151481421
4A00111N11: RNCC: 3 | RNVC: 2
93192958: RNCC: 5 | RNVC: 2

22 Jun 1998

5340-15-195-8252
Control Rod

151958252
46790818: RNCC: 3 | RNVC: 2
(241)AE38546790818: RNCC: 5 | RNVC: 2

17 May 2011

5340-15-119-7268
Pawl Fastener

151197268
60172939: RNCC: 3 | RNVC: 2

8 Nov 1994

5340-15-187-8254
Mounting Bracket

151878254
018.067.00.24: RNCC: 3 | RNVC: 2
(241)A6479018.067.00.24: RNCC: 5 | RNVC: 2
018.067.00.24: RNCC: 5 | RNVC: 2

7 May 2009

5340-15-198-7913
Angle Bracket

151987913
60188355: RNCC: 3 | RNVC: 2

17 Nov 2004

5340-15-157-4245
Access Cover

151574245
21505666: RNCC: 3 | RNVC: 2

14 Jul 2003

5340-15-193-8419
Threaded Rod End

151938419
109-0134-06-109: RNCC: 3 | RNVC: 2

21 Jul 2010

5340-15-156-4394
Clamping Catch

151564394
M24X-003-P003: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-177-3926
Access Cover

151773926
036481: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-179-9025
Mounting Plate

151799025
D1406719: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-117-9598
Angle Bracket

151179598
78969F91: RNCC: 3 | RNVC: 2
78969F91: RNCC: 3 | RNVC: 2
78969F91: RNCC: 5 | RNVC: 9

21 Mar 1996

5340-15-067-1926
Ball Socket Seat

150671926
DOA8742: RNCC: 2 | RNVC: 2

23 Nov 1993

5340-15-206-2882
Access Cover

152062882
ED0069273700-S: RNCC: 3 | RNVC: 2

1 Jun 2012

5340-15-112-3532
Butt Hinge Leaf

151123532
60148546: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-058-4014
Retaining Strap

150584014
553816162000: RNCC: 2 | RNVC: 3
538-16-1620: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-187-1466
Mounting Plate

151871466
A73641-01-20: RNCC: 3 | RNVC: 2
0172189000: RNCC: 5 | RNVC: 2

19 Feb 2009

5340-15-187-4645
Bail Handle

151874645
750-216: RNCC: 3 | RNVC: 2
(241)AA136750-216: RNCC: 5 | RNVC: 2

2 Apr 2009

5340-15-187-3112
Retaining Band

151873112
UZ194: RNCC: 3 | RNVC: 2
(241)A9410UZ194: RNCC: 5 | RNVC: 2

11 Mar 2009

5340-15-177-3455
Access Cover

151773455
0391400115: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-102-8068
Butt Hinge

151028068
211A7122-405: RNCC: 3 | RNVC: 2

27 Oct 1988

5340-15-152-6772
Vent Plug

151526772
899.470.200.0: RNCC: 3 | RNVC: 2
0-171367: RNCC: 5 | RNVC: 2

10 Oct 2000

5340-15-179-7012
Mounting Bracket

151797012
0000500414242: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-206-9943
Plug Button

152069943
091451: RNCC: 3 | RNVC: 2
(241)A3593091451: RNCC: 5 | RNVC: 2

6 Aug 2012

5340-15-179-5212
Retaining Band

151795212
P75TC410A29-401: RNCC: 3 | RNVC: 2
(241)A2142P75TC410A29-401: RNCC: 5 | RNVC: 2

2 Mar 2007

5340-15-003-9042
Support Hook

150039042
182742063: RNCC: 3 | RNVC: 2
(241)A0199182742063: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-009-2130
Rod End Clevis

150092130
204-011-179-1003: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-006-4239
Loop Clamp

150064239
4966038: RNCC: 3 | RNVC: 2

27 Aug 1979

5340-15-108-5227
Loop Clamp

151085227
4788416: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-001-8312
Mounting Bracket

150018312
5949790662: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-120-2714
Expansion Plug

151202714
60166434: RNCC: 3 | RNVC: 2

9 Mar 1995

5340-15-103-1011
Loop Clamp

151031011
DE013.13.609: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-007-1920
Loop Clamp

150071920
1372930: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-119-1687
Mounting Bracket

151191687
75208930: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-108-6291
Strap Hinge

151086291
60139701: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-001-5514
Access Cover

150015514
182719054: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-15-105-8402
Retaining Band

151058402
22063: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-111-9495
Butt Hinge Leaf

151119495
275A2142-003: RNCC: 3 | RNVC: 2

30 Jan 1991

5340-15-115-3519
Retaining Strap

151153519
30-10-167: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-060-6071
Retaining Strap

150606071
62650-101A1: RNCC: 3 | RNVC: 2

16 Jun 1977

5340-15-195-7140
Suction Cup

151957140
V4202459: RNCC: 3 | RNVC: 2

29 Apr 2011

5340-15-003-4630
Access Cover

150034630
182714115: RNCC: 3 | RNVC: 2
(241)A0199182714115: RNCC: 5 | RNVC: 2

14 Nov 2013

5340-15-103-4755
Spring Holder

151034755
W001420: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-001-1139
Mounting Bracket

150011139
5801360089: RNCC: 3 | RNVC: 2

31 May 2013

5340-15-193-6998
Access Cover

151936998
1S 703245: RNCC: 3 | RNVC: 2

2 Jul 2010

5340-15-107-5737
Bail Handle

151075737
DE160.02.208: RNCC: 3 | RNVC: 2
(241)A5015DE160.02.208: RNCC: 5 | RNVC: 2

5 Jan 1989

5340-15-068-4362
Key Holder

150684362
SH 3712-401: RNCC: 3 | RNVC: 2

9 Oct 1986

5340-15-153-2821
Loop Clamp

151532821
CFG1-25/12: RNCC: 2 | RNVC: 3
162530217: RNCC: 5 | RNVC: 3

12 Dec 2000

5340-15-061-4166
Angle Bracket

150614166
P-135340-001: RNCC: 3 | RNVC: 2
P135340-001: RNCC: 5 | RNVC: 2

20 Jan 1978

5340-15-197-8988
Bow Handle

151978988
00153545: RNCC: 3 | RNVC: 2
(241)A396300153545: RNCC: 5 | RNVC: 2

24 May 2004

5340-15-188-7175
Cushioning Pad

151887175
3555532M1: RNCC: 3 | RNVC: 2

2 Nov 2009

5340-15-153-3956
Mending Plate

151533956
5137-367-03: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-117-4307
Plain Solid Disk

151174307
700-22-030-12/M: RNCC: 3 | RNVC: 2

10 Oct 1994

5340-15-124-6103
Angle Bracket

151246103
4737841: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-150-1139
Access Cover

151501139
77800165: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-064-7200
Loop Clamp

150647200
3748270: RNCC: 3 | RNVC: 2

14 Jun 1984

5340-15-201-0597
Angle Bracket

152010597
A387A1320A: RNCC: 3 | RNVC: 2
(241)A0126A387A1320A: RNCC: 5 | RNVC: 2

16 May 2006

5340-15-057-2477
Loop Clamp

150572477
8-1541-101-45552: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-118-0084
Access Cover

151180084
1P 561187: RNCC: 3 | RNVC: 2
1P 561187: RNCC: 5 | RNVC: 9

28 Jan 1995

5340-15-114-2457
Plain Solid Disk

151142457
14313: RNCC: 3 | RNVC: 2

30 Nov 1993

5340-15-009-1465
Spring Tension Clip

150091465
1-01248-76: RNCC: 3 | RNVC: 2
10124876: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-063-3260
Retaining Strap

150633260
60113852: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-007-2563
Rod End Clevis

150072563
1383776: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-206-2912
Mounting Bracket

152062912
64700030: RNCC: 3 | RNVC: 2

1 Jun 2012

5340-15-064-8467
Bow Handle

150648467
000202988900: RNCC: 5 | RNVC: 2
000202988900: RNCC: 5 | RNVC: 9

16 Nov 1984

5340-15-170-2948
Metal Grille

151702948
8500626103: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-112-3499
Angle Bracket

151123499
60154103: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-066-0726
Retaining Strap

150660726
5989469: RNCC: 3 | RNVC: 2
5989469: RNCC: 5 | RNVC: 9

8 May 1985

5340-15-118-9108
Angle Bracket

151189108
70633981: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-061-4113
Angle Bracket

150614113
P-120198-001: RNCC: 3 | RNVC: 2
P120198-001: RNCC: 5 | RNVC: 2

19 Jan 1978

5340-15-117-2679
Loop Clamp

151172679
SAS-1597515445G-AA: RNCC: 3 | RNVC: 2
SAS-1597515445G-AA: RNCC: 3 | RNVC: 2

2 May 1994

5340-15-059-3577
Retaining Strap

150593577
1127-32-244: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-063-2764
Angle Bracket

150632764
60108156: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-109-1925
Retaining Strap

151091925
4734007: RNCC: 3 | RNVC: 2
(7001)5340151091925: RNCC: 5 | RNVC: 2

30 Mar 1988

5340-15-001-4339
Mounting Bracket

150014339
5801519138: RNCC: 3 | RNVC: 2

2 Jul 2013

5340-15-073-5233
Rim Lock

150735233
39B55X30CR: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-122-2442
Loop Clamp

151222442
80A046411: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-151-5484
Mounting Bracket

151515484
980305: RNCC: 3 | RNVC: 2

7 Jun 2000

5340-15-062-9006
Retaining Strap

150629006
0-21183: RNCC: 3 | RNVC: 2

9 Jul 1981

5340-15-153-7754
Access Cover

151537754
02730A109030: RNCC: 5 | RNVC: 2
T0064490: RNCC: 5 | RNVC: 2
02730A109030: RNCC: 5 | RNVC: 9

28 Feb 2001

5340-15-068-1358
Retaining Clip

150681358
27908-101: RNCC: 3 | RNVC: 2

26 Mar 1986

5340-15-109-8770
Retaining Strap

151098770
60134938: RNCC: 3 | RNVC: 2

15 Oct 1988

5340-15-008-4171
Loop Clamp

150084171
SF260-13-161-01: RNCC: 3 | RNVC: 2
SF260-13-161-01: RNCC: 5 | RNVC: 9

15 Sep 1981

5340-15-054-0778
Loop Clamp

150540778
260-13-136-01: RNCC: 3 | RNVC: 2
260-13-136-01: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-001-5473
Access Cover

150015473
182719591: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-15-109-7464
Angle Bracket

151097464
60119699: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-006-0256
Angle Bracket

150060256
1026-14-142: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-187-7424
Mounting Plate

151877424
504267030: RNCC: 3 | RNVC: 2

5 May 2009

5340-15-150-9799
Hook Handle

151509799
369-09098-102: RNCC: 3 | RNVC: 2

17 Feb 2000

5340-15-002-5979
Mounting Bracket

150025979
504381607: RNCC: 3 | RNVC: 2

4 Sep 2013

5340-15-155-8087
Loop Clamp

151558087
42092497: RNCC: 3 | RNVC: 2

5 Jul 2002

5340-15-063-7835
Spring Tension Clip

150637835
1127/324: RNCC: 3 | RNVC: 2
77901297: RNCC: 5 | RNVC: 2

31 Mar 1982

5340-15-109-1796
Retaining Strap

151091796
95162105: RNCC: 3 | RNVC: 2
9926673: RNCC: 5 | RNVC: 2
95162105: RNCC: 5 | RNVC: 9

20 Apr 1988

5340-15-199-4873
Access Cover

151994873
1Z 597671: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-15-195-3006
Mounting Bracket

151953006
STB-355PPM: RNCC: 3 | RNVC: 2
STB-355PPM: RNCC: 3 | RNVC: 2
(241)A8460STB-355PPM: RNCC: 5 | RNVC: 2

14 Mar 2011

5340-15-151-7854
Angle Bracket

151517854
0-178122: RNCC: 3 | RNVC: 2

10 Jul 2000

5340-15-001-3158
Rod End Clevis

150013158
00096167: RNCC: 3 | RNVC: 2

17 Jun 2013

5340-15-001-8358
Mounting Bracket

150018358
5949779150: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-120-8273
Loop Clamp

151208273
1.1.0438: RNCC: 3 | RNVC: 2

25 Aug 1995

5340-15-189-4768
Loop Clamp

151894768
0380010: RNCC: 3 | RNVC: 2

25 Feb 2010

5340-15-056-9886
Loop Clamp

150569886
67171-01-003: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-111-9271
Plug Button

151119271
41800367: RNCC: 3 | RNVC: 2

10 Sep 1989

5340-15-122-5916
Screw Thread Insert

151225916
A0410095097: RNCC: 5 | RNVC: 2
A0410095097: RNCC: 5 | RNVC: 9
A0410095097: RNCC: 5 | RNVC: 9

10 Sep 1996

5340-15-179-2723
Access Cover

151792723
76068632: RNCC: 3 | RNVC: 2
(241)A398076068632: RNCC: 5 | RNVC: 2

10 Aug 2006

5340-15-065-3213
Clamping Catch

150653213
P-894876-003: RNCC: 3 | RNVC: 2
P894876-003: RNCC: 5 | RNVC: 2

19 Feb 1985

5340-15-006-8988
Rod End Clevis

150068988
39A528-12-30-01: RNCC: 3 | RNVC: 2

2 Jan 1979

5340-15-061-2167
Retaining Strap

150612167
026200374300: RNCC: 5 | RNVC: 2
1200096-122300015: RNCC: 5 | RNVC: 2
026200374300: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-153-5190
Access Cover

151535190
142018120: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-206-3526
Mounting Plate

152063526
50040 9074: RNCC: 3 | RNVC: 2

4 Jun 2012

5340-15-119-9040
Handle Grip

151199040
180506120: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-205-4184
Retaining Strap

152054184
178904345: RNCC: 3 | RNVC: 2
(241)A0199178904345: RNCC: 5 | RNVC: 2

8 Mar 2012

5340-15-063-2816
Angle Bracket

150632816
60109310: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-148-3549
Angle Bracket

151483549
107563: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-007-2526
Angle Bracket

150072526
1374225: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-004-2477
Mending Plate

150042477
163QA8: RNCC: 5 | RNVC: 2
163QA8: RNCC: 5 | RNVC: 9

12 Oct 1977

5340-15-155-5668
Corner Brace

151555668
109-0330-12-3: RNCC: 3 | RNVC: 2

12 Apr 2002

5340-15-107-2500
Handle Grip

151072500
3070-000008: RNCC: 3 | RNVC: 2
3070-08: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-150-7817
Loop Clamp

151507817
00010191: RNCC: 3 | RNVC: 2

24 Jan 2000

5340-15-163-4074
Mounting Bracket

151634074
9957842: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-202-3351
Loop Clamp

152023351
18088492: RNCC: 3 | RNVC: 2
(241)A424918088492: RNCC: 5 | RNVC: 2

28 Feb 2007

5340-15-195-1891
Handwheel

151951891
VRTP.200+IR A 20: RNCC: 3 | RNVC: 2

7 Mar 2011

5340-15-147-3651
Access Cover

151473651
109-0731-41-115: RNCC: 3 | RNVC: 2

31 Oct 1997

5340-15-117-9571
Loop Clamp

151179571
206472F91: RNCC: 3 | RNVC: 2
206472F91: RNCC: 3 | RNVC: 2
206472: RNCC: 3 | RNVC: 2
206472F91: RNCC: 5 | RNVC: 9

20 Oct 1994

5340-15-002-7839
Loop Clamp

150027839
C4486: RNCC: 3 | RNVC: 2

2 Oct 2013

5340-15-158-6168
Rod End Clevis

151586168
122513106: RNCC: 3 | RNVC: 2

10 Mar 2004

5340-15-109-7115
Retaining Strap

151097115
60134575: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-107-2474
Plain Solid Disk

151072474
3070-000119: RNCC: 3 | RNVC: 2
3070-119: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-007-3310
Angle Bracket

150073310
1137-04-105: RNCC: 3 | RNVC: 2

27 Oct 1979

5340-15-179-7013
Spring Tension Clip

151797013
0000500414245: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-006-3154
Retaining Strap

150063154
15MW2010-1: RNCC: 3 | RNVC: 2
15MW2010-1: RNCC: 5 | RNVC: 2
15MW2010-1: RNCC: 5 | RNVC: 9
15MW2010-1: RNCC: 5 | RNVC: 9

24 Nov 1979

5340-15-155-6566
Loop Clamp

151556566
0550141: RNCC: 3 | RNVC: 2
(241)A97720550141: RNCC: 8 | RNVC: 2

14 May 2002

5340-15-162-4011
Bridge Clamp

151624011
75245 F01: RNCC: 3 | RNVC: 2

16 Aug 2001

5340-15-150-9013
Mounting Bracket

151509013
00086887: RNCC: 3 | RNVC: 2

3 Feb 2000

5340-15-152-7916
Mounting Bracket

151527916
P131403: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-040-1620
Angle Bracket

150401620
1-2552-103-27824: RNCC: 3 | RNVC: 2
1-2552-1-03-27824: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-177-3531
Loop Clamp

151773531
CFDIN38-20: RNCC: 3 | RNVC: 2
017274: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-111-7920
Spring Tension Clip

151117920
80141: RNCC: 3 | RNVC: 2
8193859: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-179-8994
Mounting Plate

151798994
D1410103: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-154-4289
Shelf Bracket

151544289
OP 005101: RNCC: 3 | RNVC: 2

29 May 2001

5340-15-120-0193
Loop Clamp

151200193
79010949: RNCC: 3 | RNVC: 2

5 Dec 1994

5340-15-108-3500
Butt Hinge Leaf

151083500
68-403011-001: RNCC: 3 | RNVC: 2

2 May 1989

5340-15-145-0715
Loop Clamp

151450715
18088392: RNCC: 3 | RNVC: 2
A321019-002: RNCC: 5 | RNVC: 2
(241)A424918088392: RNCC: 5 | RNVC: 2

15 Apr 1997

5340-15-103-1009
Loop Clamp

151031009
817.10.051: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-003-2387
Retaining Strap

150032387
ED0024403110-S: RNCC: 3 | RNVC: 2

30 Oct 2013

5340-15-181-0051
Mounting Bracket

151810051
D9334.0000: RNCC: 3 | RNVC: 2

18 Sep 2008

5340-15-008-6282
Rod End Clevis

150086282
22154: RNCC: 3 | RNVC: 2

16 Nov 1981

5340-15-179-9895
Strap Hinge

151799895
2991200: RNCC: 3 | RNVC: 2

16 Nov 2007

5340-15-116-2544
Retaining Strap

151162544
190512327: RNCC: 3 | RNVC: 2

31 Mar 1993

5340-15-201-6325
Access Cover

152016325
T0065171: RNCC: 3 | RNVC: 2
(241)A0810T0065171: RNCC: 5 | RNVC: 2

7 Nov 2006

5340-15-103-8667
Loop Clamp

151038667
10450490: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-194-1077
Mounting Bracket

151941077
227191: RNCC: 3 | RNVC: 2
MR4437227191: RNCC: 3 | RNVC: 2
(241)AG622MR4437227191: RNCC: 5 | RNVC: 2

7 Sep 2010

5340-15-110-7949
Retaining Strap

151107949
22889-101A01: RNCC: 3 | RNVC: 2
22889-101A1: RNCC: 5 | RNVC: 2

22 Jul 1990

5340-15-001-7286
Retaining Band

150017286
111-12610: RNCC: 3 | RNVC: 2

15 Jul 2013

5340-15-119-5589
Angle Bracket

151195589
4881598: RNCC: 3 | RNVC: 2

19 Sep 1994

5340-15-119-7871
Mechanical Stop

151197871
75205919: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-109-7163
Retaining Band

151097163
4807808: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-068-9186
Handle Grip

150689186
561880: RNCC: 3 | RNVC: 2

9 Oct 1984

5340-15-150-5907
Butt Hinge

151505907
A61730-01-10: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-15-179-5467
Corner Brace

151795467
76045161: RNCC: 3 | RNVC: 2

2 Mar 2007

5340-15-003-1798
Angle Bracket

150031798
740994: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-147-3875
Access Cover

151473875
112707588: RNCC: 3 | RNVC: 2

29 May 1998

5340-15-104-4353
Expansion Plug

151044353
10159201: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-108-1675
Spring Holder

151081675
1576-18-199: RNCC: 3 | RNVC: 2
157618199: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-177-3897
Mounting Bracket

151773897
035462: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-195-5557
Mounting Bracket

151955557
23057: RNCC: 3 | RNVC: 2
23057: RNCC: 3 | RNVC: 2
(241)AE05123057: RNCC: 5 | RNVC: 2

6 Apr 2011

5340-15-068-9789
Butt Hinge Leaf

150689789
SF260-18-12-11: RNCC: 3 | RNVC: 2
SF260-18-12-11: RNCC: 5 | RNVC: 9

12 Aug 1986

5340-15-158-6115
Casement Fastener

151586115
122607124: RNCC: 3 | RNVC: 2

10 Mar 2004

5340-15-153-5258
Filler Opening Cap

151535258
442000000/72/05: RNCC: 3 | RNVC: 2
ICF 18: RNCC: 5 | RNVC: 2

7 Feb 2001

5340-15-070-9441
Retaining Strap

150709441
F333A6C52: RNCC: 3 | RNVC: 2
F333A6C-52: RNCC: 5 | RNVC: 2
F333A6C-52: RNCC: 5 | RNVC: 2

1 Mar 1978

5340-15-062-6568
Angle Bracket

150626568
0-34402: RNCC: 3 | RNVC: 2

19 Jul 1982

5340-15-205-0568
Retaining Strap

152050568
9170007: RNCC: 3 | RNVC: 2
(241)A50099170007: RNCC: 5 | RNVC: 2

16 Feb 2012

5340-15-110-6392
Mending Plate

151106392
67410170: RNCC: 3 | RNVC: 2
0-111221: RNCC: 5 | RNVC: 2

16 Mar 1990

5340-15-163-3639
Mounting Bracket

151633639
4823608: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-158-0477
Access Cover

151580477
T0004848: RNCC: 3 | RNVC: 2

15 Dec 2003

5340-15-178-7559
Mounting Plate

151787559
047110: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-178-7788
Retaining Strap

151787788
030380: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-109-1249
Angle Bracket

151091249
60135387: RNCC: 3 | RNVC: 2

30 Apr 1988

5340-15-108-7233
Angle Bracket

151087233
60145439: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-109-1837
Angle Bracket

151091837
60100488: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-153-3859
Access Cover

151533859
212-1125-47-1: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-146-7306
Threaded Rod End

151467306
SFLG-14.45: RNCC: 3 | RNVC: 2

2 Jul 2001

5340-15-005-5298
Retaining Strap

150055298
1026-12-112: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-147-0940
Webbing Strap

151470940
S944280: RNCC: 3 | RNVC: 2

21 Aug 1997

5340-15-148-4568
Access Cover

151484568
397323G2: RNCC: 5 | RNVC: 2
397323G2: RNCC: 5 | RNVC: 9

11 Aug 1998

5340-15-108-3390
Retaining Strap

151083390
266A0141-003: RNCC: 3 | RNVC: 2

10 Apr 1989

5340-15-066-0402
Angle Bracket

150660402
1127-31-112: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-006-9035
Retaining Strap

150069035
39X722-12-98: RNCC: 3 | RNVC: 2

2 Jan 1979

5340-15-059-0602
Spring Tension Clip

150590602
7-8617-101-28764-1: RNCC: 3 | RNVC: 2

12 Sep 1975

5340-15-118-0876
Retaining Strap

151180876
D0475825: RNCC: 3 | RNVC: 2

20 Dec 1994

5340-15-116-4823
Angle Bracket

151164823
60161249: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-199-4358
Hand Crank

151994358
489660: RNCC: 3 | RNVC: 2
(241)A0866489660: RNCC: 5 | RNVC: 2

4 Apr 2005

5340-15-197-2109
Expansion Shield

151972109
PN UAS 00047178: RNCC: 3 | RNVC: 2
5930F76037919: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-122-1462
Handle Grip

151221462
BL368-10X67: RNCC: 3 | RNVC: 2
4002: RNCC: 5 | RNVC: 2

21 May 1996

5340-15-108-6268
Retaining Strap

151086268
60135628: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-152-0031
Angle Bracket

151520031
60128086: RNCC: 3 | RNVC: 2

31 Jul 2000

5340-15-107-8771
Angle Bracket

151078771
60137939: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-193-1810
Bow Handle

151931810
76042360: RNCC: 3 | RNVC: 2

20 Apr 2010

5340-15-121-0615
Screw Thread Insert

151210615
M8(X1)X1.5D: RNCC: 3 | RNVC: 2
210002538: RNCC: 5 | RNVC: 2

21 Sep 1995

5340-15-178-7538
Mounting Plate

151787538
047781: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-118-4042
Angle Bracket

151184042
60157580: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-059-9606
Retaining Strap

150599606
67053-101: RNCC: 3 | RNVC: 2

23 Nov 1976

5340-15-203-6507
Filler Opening Cap

152036507
0361955: RNCC: 3 | RNVC: 2

24 Jun 2011

5340-15-204-8032
Bow Handle

152048032
D0050004: RNCC: 3 | RNVC: 2
(241)A3917D0050004: RNCC: 5 | RNVC: 2

10 Jan 2012

5340-15-009-0722
Loop Clamp

150090722
554252: RNCC: 3 | RNVC: 2

27 Aug 1979

5340-15-162-2547
Mounting Bracket

151622547
125353: RNCC: 3 | RNVC: 2
U5240361: RNCC: 5 | RNVC: 2

17 May 2001

5340-15-118-1954
Loop Clamp

151181954
10451090: RNCC: 3 | RNVC: 2

22 Apr 1994

5340-15-179-7347
Mounting Bracket

151797347
500320256: RNCC: 3 | RNVC: 2
(241)A4249500320256: RNCC: 5 | RNVC: 2

7 Jun 2007

5340-15-073-5210
Rim Lock Set

150735210
90X205X20CILINDR025X20: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-197-1765
Rim Lock Set

151971765
PN UAS 00022886: RNCC: 3 | RNVC: 2
5340F76010617: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-196-6189
Rim Lock Set

151966189
PN UAS 00041406: RNCC: 3 | RNVC: 2
5340F76034686: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-007-9151
Angle Bracket

150079151
1391113: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-057-8786
Loop Clamp

150578786
6-74515-000-77098: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-151-7299
Bow Handle

151517299
0-153545: RNCC: 3 | RNVC: 2
(241)A39630-153545: RNCC: 5 | RNVC: 2
1PA39630-153545: RNCC: 5 | RNVC: 2

4 Jul 2000

5340-15-009-2530
Angle Bracket

150092530
P-882594-001: RNCC: 3 | RNVC: 2
P882594-001: RNCC: 5 | RNVC: 2

23 Aug 1980

5340-15-054-4097
Retaining Ring

150544097
522371: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-108-5202
Retaining Strap

151085202
4053247: RNCC: 3 | RNVC: 2
4755963: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-197-5767
Permanent Magnet

151975767
PN UAS 00049360: RNCC: 3 | RNVC: 2
3470F76040008: RNCC: 5 | RNVC: 9

8 Apr 2004

5340-15-119-7866
Mechanical Stop

151197866
75204507: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-205-3582
Caster Wheel

152053582
30-6164-16/2: RNCC: 3 | RNVC: 2

2 Mar 2012

5340-15-157-7355
Mounting Bracket

151577355
SOSTEGNO ELETTROP.UMM1109 F.1532: RNCC: 3 | RNVC: 2

16 Oct 2003

5340-15-103-0719
Angle Bracket

151030719
L8506003: RNCC: 3 | RNVC: 2
(241)A5015DE160.03.159: RNCC: 5 | RNVC: 2
DE160.03.159: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-194-4025
Pipe Hanger

151944025
71416089: RNCC: 3 | RNVC: 2
71416089: RNCC: 5 | RNVC: 2

5 Nov 2010

5340-15-194-0051
Access Cover

151940051
109-0010-91-103: RNCC: 3 | RNVC: 2

12 Aug 2010

5340-15-004-8032
Angle Bracket

150048032
P-110580-003: RNCC: 3 | RNVC: 2
P110580-003: RNCC: 5 | RNVC: 2

18 Jul 1978

5340-15-103-8466
Angle Bracket

151038466
8577447: RNCC: 3 | RNVC: 2
(7001)2920151038466: RNCC: 5 | RNVC: 2

30 Mar 1988

5340-15-100-5063
Leather Strap

151005063
000900274400: RNCC: 5 | RNVC: 2
000900274400: RNCC: 5 | RNVC: 9

22 Apr 1987

5340-15-112-3497
Angle Bracket

151123497
60158721: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-053-0665
Screw Thread Insert

150530665
26T038P045: RNCC: 3 | RNVC: 2

1 Jan 1974

Load More Results