What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 22 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 22 of 72

5340-15-199-7143
Protection Bellows

151997143
8141955: RNCC: 3 | RNVC: 2
(241)A42498141955: RNCC: 5 | RNVC: 2

18 May 2005

5340-15-100-4236
Retaining Strap

151004236
6154841: RNCC: 3 | RNVC: 2

10 Feb 1987

5340-15-112-3493
Angle Bracket

151123493
60148540: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-118-4425
Angle Bracket

151184425
60152862: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-040-4218
Handle Grip

150404218
7-5763-100-25641-2: RNCC: 3 | RNVC: 2
7-5763-1-00-25641-2: RNCC: 5 | RNVC: 2

10 Apr 1970

5340-15-112-3491
Angle Bracket

151123491
60148795: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-150-6842
Metal Grille

151506842
0391600238: RNCC: 3 | RNVC: 2

20 Dec 1999

5340-15-063-2829
Retaining Strap

150632829
60110271: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-057-7785
Loop Clamp

150577785
6-74519-000-77100: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-109-7113
Plug Button

151097113
14673980: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-001-0403
Mounting Bracket

150010403
219AE3169-127: RNCC: 3 | RNVC: 2

21 May 2013

5340-15-195-8896
Mechanical Stop

151958896
A1409870040: RNCC: 3 | RNVC: 2
(241)AJ611A1409870040: RNCC: 5 | RNVC: 2

23 May 2011

5340-15-119-5652
Angle Bracket

151195652
4881422: RNCC: 3 | RNVC: 2

19 Sep 1994

5340-15-108-7604
Angle Bracket

151087604
60136303: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-207-1031
Access Cover

152071031
552607010000: RNCC: 3 | RNVC: 2
(241)A1140552607010000: RNCC: 5 | RNVC: 2

4 Sep 2012

5340-15-231-5629
Angle Bracket

152315629
598515E071698: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-101-5449
Retaining Strap

151015449
000200623700: RNCC: 5 | RNVC: 2
000200623700: RNCC: 5 | RNVC: 9

17 Oct 1987

5340-15-109-1839
Angle Bracket

151091839
60105401: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-113-3574
Retaining Strap

151133574
79033616: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-157-9229
Retaining Strap

151579229
0-163666: RNCC: 3 | RNVC: 2
(241)A39630-163666: RNCC: 5 | RNVC: 2
1PA39630-163666: RNCC: 5 | RNVC: 2

24 Nov 2003

5340-15-114-7928
Retaining Strap

151147928
8934.00.10: RNCC: 3 | RNVC: 2

12 May 1993

5340-15-009-8286
Leather Strap

150098286
A20X315 DIN 6409: RNCC: 3 | RNVC: 2

7 Feb 1994

5340-15-051-3293
Plain Solid Disk

150513293
898218: RNCC: 3 | RNVC: 2
898218: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-155-8493
Angle Bracket

151558493
8870 003-951-PP: RNCC: 3 | RNVC: 2

7 Aug 2002

5340-15-059-7399
Screw Thread Insert

150597399
1182-20627: RNCC: 3 | RNVC: 2

5 Feb 1976

5340-15-120-2951
Angle Bracket

151202951
4852643: RNCC: 3 | RNVC: 2

13 Mar 1995

5340-15-205-7759
Access Cover

152057759
182707288: RNCC: 3 | RNVC: 2
(241)A0199182707288: RNCC: 5 | RNVC: 2

3 Apr 2012

5340-15-003-1483
Utility Resilient Mount

150031483
5949782584: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-135-7385
Handle Grip

151357385
4748434: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-052-0376
Loop Clamp

150520376
M781-20-75-10: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-108-8707
Retaining Strap

151088707
575.2/RSVM65-280A/OR-553667: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-200-8098
Block Clamp

152008098
AIT13901KEHH8330: RNCC: 3 | RNVC: 2

5 Mar 2006

5340-15-118-2025
Angle Bracket

151182025
60138230: RNCC: 3 | RNVC: 2

22 Apr 1994

5340-15-119-1085
Access Cover

151191085
73070945: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-101-1352
Retaining Strap

151011352
129799: RNCC: 3 | RNVC: 2

8 Dec 1983

5340-15-179-6424
Mounting Plate

151796424
98185319: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-158-0067
Access Cover

151580067
1171.305-01: RNCC: 3 | RNVC: 2

15 Dec 2003

5340-15-193-1468
Control Rod

151931468
504124284: RNCC: 3 | RNVC: 2
(241)A4249504124284: RNCC: 5 | RNVC: 2

20 Apr 2010

5340-15-118-3410
Loop Clamp

151183410
60141426: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-187-2170
Dashpot

151872170
174801103: RNCC: 3 | RNVC: 2
(241)A0199174801103: RNCC: 5 | RNVC: 2

25 Feb 2009

5340-15-155-3049
Angle Bracket

151553049
60185886: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-15-118-7556
Angle Bracket

151187556
9435070: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-120-7775
Screw Thread Insert

151207775
149084 FIND NO. 16: RNCC: 3 | RNVC: 2
842.12.0905.000.1694: RNCC: 5 | RNVC: 2

31 Jul 1995

5340-15-067-6820
Handle Grip

150676820
029781: RNCC: 2 | RNVC: 2
029781: RNCC: 5 | RNVC: 9

1 Apr 1998

5340-15-131-6647
Angle Bracket

151316647
608097: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-118-3652
Mending Plate

151183652
60142930: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-157-9073
Mending Plate

151579073
0-121015: RNCC: 3 | RNVC: 2
00121015: RNCC: 3 | RNVC: 2
(241)A39630-121015: RNCC: 5 | RNVC: 2
1PA39630-121015: RNCC: 5 | RNVC: 2

24 Nov 2003

5340-15-154-0931
Angle Bracket

151540931
0-150390: RNCC: 3 | RNVC: 2
1PA39630-150390: RNCC: 5 | RNVC: 2
(241)A39630-150390: RNCC: 5 | RNVC: 2

20 Mar 2001

5340-15-155-8213
Angle Bracket

151558213
BN175/2: RNCC: 3 | RNVC: 2
42536894: RNCC: 3 | RNVC: 2

10 Jul 2002

5340-15-071-4556
Rim Lock Set

150714556
P2100: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-201-9979
Mounting Bracket

152019979
0099-A-4: RNCC: 3 | RNVC: 2

21 Jan 2007

5340-15-148-7092
Section Block Clamp

151487092
39A728-12-04-02A: RNCC: 3 | RNVC: 2

28 Sep 1998

5340-15-152-7950
Access Cover

151527950
P200103: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-115-7472
Rod End Clevis

151157472
271003/2: RNCC: 3 | RNVC: 2

3 Sep 1993

5340-15-207-4133
Loop Clamp

152074133
NS4F010-3: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-15-000-2974
Mounting Bracket

150002974
YT-ICB45: RNCC: 3 | RNVC: 2

18 Feb 2013

5340-15-060-5695
Mending Plate

150605695
22290-102: RNCC: 3 | RNVC: 2

30 May 1977

5340-15-120-8004
Rod End Clevis

151208004
129-0031-28-101: RNCC: 3 | RNVC: 2

7 Aug 1995

5340-15-196-8966
Retaining Band

151968966
PN UAS 00025328: RNCC: 3 | RNVC: 2
2540F76012968: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-186-8965
Access Cover

151868965
643814: RNCC: 3 | RNVC: 2
0028926: RNCC: 5 | RNVC: 2

5 Jan 2009

5340-15-007-3854
Plug Button

150073854
1393446: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-127-7064
Handle Grip

151277064
7502-65: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-145-2103
Mounting Bracket

151452103
119408: RNCC: 3 | RNVC: 2

2 Jun 1997

5340-15-063-4832
Loop Clamp

150634832
60103784: RNCC: 3 | RNVC: 2

15 Jun 1982

5340-15-061-4957
Screw Thread Insert

150614957
000200305200: RNCC: 5 | RNVC: 2
000200305200: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-153-3925
Mending Plate

151533925
5137-325-05: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-204-3450
Padlock

152043450
25150015: RNCC: 3 | RNVC: 2
(241)ACA6425150015: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-151-8675
Mending Plate

151518675
60116974: RNCC: 3 | RNVC: 2

14 Jul 2000

5340-15-206-7189
Expansion Plug

152067189
230023354: RNCC: 3 | RNVC: 2
(241)A0199230023354: RNCC: 5 | RNVC: 2

6 Jul 2012

5340-15-007-2404
Retaining Strap

150072404
1398426: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-008-0769
Angle Bracket

150080769
60114217: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-007-5433
Angle Bracket

150075433
1239-07-100: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-155-2373
Access Cover

151552373
212-1125-69-117: RNCC: 3 | RNVC: 2

12 Feb 2002

5340-15-205-3025
Access Cover

152053025
112709960: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-108-3514
Rod End Clevis

151083514
68-600120-005: RNCC: 3 | RNVC: 2

2 May 1989

5340-15-102-9102
Spring Holder

151029102
1P209933: RNCC: 3 | RNVC: 2
1P209933: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-199-5400
Mortise Lock Set

151995400
ART.2025-DX: RNCC: 3 | RNVC: 2

17 Apr 2005

5340-15-116-4758
Butt Hinge Leaf

151164758
60165040: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-007-6981
Mending Plate

150076981
1141-39-937: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-007-5132
Screw Thread Insert

150075132
1139-02-144: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-164-2636
Angle Bracket

151642636
4730593: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-117-9804
Mending Plate

151179804
DOR0113345: RNCC: 3 | RNVC: 2

7 Jul 1994

5340-15-160-3299
Door Closer

151603299
F720035741: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-040-8796
Angle Bracket

150408796
2-2835-100-24564-2: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-169-5610
Angle Bracket

151695610
F72015174: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-061-4800
Mending Plate

150614800
018200174200: RNCC: 5 | RNVC: 2
1200096-139000001: RNCC: 5 | RNVC: 2
018200174200: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-007-2616
Rod End Clevis

150072616
1387741: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-105-2175
Mending Plate

151052175
4980928: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-100-8800
Mending Plate

151008800
322103G1: RNCC: 3 | RNVC: 2
322103G1: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-178-9438
Mounting Plate

151789438
TN007MD109AE00: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-15-041-4046
Handle Grip

150414046
IS002: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-156-1809
Loop Clamp

151561809
18088591: RNCC: 3 | RNVC: 2

11 Dec 2002

5340-15-121-0616
Screw Thread Insert

151210616
M10(X1.5)X1.5D: RNCC: 3 | RNVC: 2
210002539: RNCC: 5 | RNVC: 2

21 Sep 1995

5340-15-073-8912
Flush Lock

150738912
13A65X100-3LEVE: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-110-2026
Loop Clamp

151102026
102377-1: RNCC: 3 | RNVC: 2
102377-1: RNCC: 5 | RNVC: 9

4 Sep 1990

5340-15-005-4613
Screw Thread Insert

150054613
1137-16-220: RNCC: 3 | RNVC: 2

20 Nov 1978

5340-15-124-4535
Angle Bracket

151244535
5922256: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-101-6324
Hand Crank

151016324
000202441100: RNCC: 5 | RNVC: 2
000202441100: RNCC: 5 | RNVC: 9

19 Jul 1987

5340-15-007-2566
Retaining Strap

150072566
1384614: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-157-6965
Mounting Bracket

151576965
UMM 1109 F1532: RNCC: 3 | RNVC: 2

16 Oct 2003

5340-15-060-3737
Plain Solid Disk

150603737
22218-101: RNCC: 3 | RNVC: 2

15 Mar 1977

5340-15-100-7632
Access Door Hinge

151007632
109-0640-49-35: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-15-001-1215
Loop Clamp

150011215
TC-PP301-325.4: RNCC: 3 | RNVC: 2
N60.07.00.00-29: RNCC: 5 | RNVC: 2
TC-PP301-325.4: RNCC: 5 | RNVC: 2
N60.07.00.00-8: RNCC: 5 | RNVC: 2

31 May 2013

5340-15-111-8376
Angle Bracket

151118376
65576950: RNCC: 3 | RNVC: 2
8194019: RNCC: 5 | RNVC: 2

4 Aug 1988

5340-15-205-9050
Block Clamp

152059050
A465A3002A: RNCC: 3 | RNVC: 2

13 Apr 2012

5340-15-194-7820
Mending Plate

151947820
50184: RNCC: 3 | RNVC: 2
(241)A348850184: RNCC: 5 | RNVC: 2

14 Jan 2011

5340-15-062-1991
Angle Bracket

150621991
P-892851-001: RNCC: 3 | RNVC: 2
P892851-001: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-119-6346
Angle Bracket

151196346
60144392: RNCC: 3 | RNVC: 2

3 Oct 1994

5340-15-187-9438
Caster Wheel

151879438
7337: RNCC: 3 | RNVC: 2

3 Jun 2009

5340-15-063-2814
Angle Bracket

150632814
60109171: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-130-9711
Handle Grip

151309711
2765-5: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-189-6605
Pawl Fastener

151896605
NOTTOLINO: RNCC: 3 | RNVC: 2

26 Feb 2010

5340-15-002-6727
Strap Hinge

150026727
070825004A: RNCC: 3 | RNVC: 2

23 Sep 2013

5340-15-207-6688
Mounting Bracket

152076688
185300106: RNCC: 3 | RNVC: 2
(241)A0199185300106: RNCC: 5 | RNVC: 2

9 Nov 2012

5340-15-118-3419
Loop Clamp

151183419
60145869: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-204-0278
Plug Button

152040278
154227403: RNCC: 3 | RNVC: 2

19 Aug 2011

5340-15-005-3160
Loop Clamp

150053160
0-01734: RNCC: 3 | RNVC: 2
1PA39630-01734: RNCC: 5 | RNVC: 2

7 Sep 1978

5340-15-045-0883
Rod End Clevis

150450883
506-32-01-01: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-187-3097
Retaining Band

151873097
UZ157: RNCC: 3 | RNVC: 2
(241)A9410UZ157: RNCC: 5 | RNVC: 2

11 Mar 2009

5340-15-059-2485
Retaining Strap

150592485
1127-15-993: RNCC: 3 | RNVC: 2

12 Oct 1974

5340-15-154-1138
Angle Bracket

151541138
0-170542: RNCC: 3 | RNVC: 2
(241)A39630-170542: RNCC: 5 | RNVC: 2
1PA39630-170542: RNCC: 5 | RNVC: 2

22 Mar 2001

5340-15-157-6417
Block Clamp

151576417
AIT13901KE4490: RNCC: 3 | RNVC: 2
TA30500763-14: RNCC: 8 | RNVC: 2

12 Oct 2003

5340-15-059-3576
Retaining Strap

150593576
1127-36-236: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-100-8091
Butt Hinge Leaf

151008091
109-0640-50-136: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-15-155-5744
Access Cover

151555744
109-0951-53-103: RNCC: 3 | RNVC: 2

12 Apr 2002

5340-15-056-9889
Loop Clamp

150569889
67171-01-006: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-178-7433
Butt Hinge

151787433
043878: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-052-1297
Loop Clamp

150521297
N0R2-505-06-45B: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-116-1107
Plain Solid Disk

151161107
DPR29494/1-32: RNCC: 3 | RNVC: 2

11 Oct 1993

5340-15-154-5129
Bow Handle

151545129
262A1235-001: RNCC: 3 | RNVC: 2

21 Jun 2001

5340-15-057-2816
Screw Thread Insert

150572816
1276-12-169: RNCC: 3 | RNVC: 2
127612169: RNCC: 5 | RNVC: 2

31 Dec 1975

5340-15-179-5510
Angle Bracket

151795510
71-13501: RNCC: 3 | RNVC: 2
(241)A331471-13501: RNCC: 5 | RNVC: 2

2 Mar 2007

5340-15-205-4155
Mortise Latch

152054155
2 0197-417: RNCC: 3 | RNVC: 2
(241)S34652 0197-417: RNCC: 5 | RNVC: 2

8 Mar 2012

5340-15-006-8245
Loop Clamp

150068245
N0R2-505-06-27B: RNCC: 3 | RNVC: 2

21 Mar 1980

5340-15-155-0505
Angle Bracket

151550505
J28040556-001: RNCC: 3 | RNVC: 2

9 Jan 2002

5340-15-155-3921
Angle Bracket

151553921
8854 138-221: RNCC: 3 | RNVC: 2

12 Mar 2002

5340-15-001-5457
Access Cover

150015457
182719575: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-15-160-3004
Coat And Hat Hook

151603004
F720043191: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-008-0727
Retaining Strap

150080727
60113127: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-147-3660
Access Cover

151473660
109-0745-93-127: RNCC: 3 | RNVC: 2

31 Oct 1997

5340-15-064-2046
Screw Thread Insert

150642046
590-962-402: RNCC: 3 | RNVC: 2
590.962.402: RNCC: 5 | RNVC: 2

6 Dec 1983

5340-15-064-8076
Angle Bracket

150648076
60118395: RNCC: 3 | RNVC: 2

17 Nov 1983

5340-15-151-6728
Loop Clamp

151516728
8967818: RNCC: 3 | RNVC: 2

26 Jun 2000

5340-15-179-7024
Mounting Bracket

151797024
0000098198566: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-198-5206
Mounting Bracket

151985206
SN: RNCC: 3 | RNVC: 2

7 Oct 2004

5340-15-114-7910
Butt Hinge

151147910
8820.00.06: RNCC: 3 | RNVC: 2

12 May 1993

5340-15-045-2496
Rod End Clevis

150452496
503-20-42: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-112-9713
Rod End Clevis

151129713
129-0041-37-101: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-15-055-3987
Handle Grip

150553987
58621-030: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-059-3573
Retaining Strap

150593573
1127-36-220: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-045-2924
Loop Clamp

150452924
N0R2-505-06-8B: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-154-0408
Loop Clamp

151540408
0-157354: RNCC: 3 | RNVC: 2
1PA39630-157354: RNCC: 5 | RNVC: 2
(241)A39630-157354: RNCC: 5 | RNVC: 2

15 Mar 2001

5340-15-179-8216
Flush Lock

151798216
OA312-07-0/063530062: RNCC: 3 | RNVC: 2

3 Aug 2007

5340-15-119-4022
Angle Bracket

151194022
60170644: RNCC: 3 | RNVC: 2

25 Jul 1994

5340-15-195-1994
Access Cover

151951994
76033788: RNCC: 3 | RNVC: 2

7 Mar 2011

5340-15-186-8994
Access Cover

151868994
139715: RNCC: 3 | RNVC: 2
0028348: RNCC: 5 | RNVC: 2

5 Jan 2009

5340-15-101-9896
Bow Handle

151019896
009A1708: RNCC: 3 | RNVC: 2

29 Jul 1988

5340-15-179-6981
Mounting Bracket

151796981
0000500409722: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-122-2138
Loop Clamp

151222138
800050452: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-201-0167
Loop Clamp

152010167
440SS12-6: RNCC: 3 | RNVC: 2

10 May 2006

5340-15-195-8522
Mounting Bracket

151958522
A6673200073AA: RNCC: 3 | RNVC: 2
(241)AJ611A6673200073AA: RNCC: 5 | RNVC: 2

23 May 2011

5340-15-118-7568
Mounting Bracket

151187568
9436107: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-201-3867
Screw Thread Insert

152013867
5387.4B-2104/1: RNCC: 3 | RNVC: 2
(241)A53875387.4B-2104/1: RNCC: 5 | RNVC: 2

30 Jul 2006

5340-15-062-1940
Angle Bracket

150621940
P-892792-001: RNCC: 3 | RNVC: 2
P892792-001: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-006-1937
Plug Button

150061937
1-45916-87: RNCC: 3 | RNVC: 2
1-45916-87: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-111-3783
Angle Bracket

151113783
116A1401-001: RNCC: 3 | RNVC: 2

7 Sep 1990

5340-15-153-3539
Plug Button

151533539
999-5001-10-232: RNCC: 3 | RNVC: 2

19 Dec 2000

5340-15-003-9134
Mounting Plate

150039134
182741344: RNCC: 3 | RNVC: 2
(241)A0199182741344: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-193-8965
Mounting Bracket

151938965
109-0605-53-101: RNCC: 3 | RNVC: 2

26 Jul 2010

5340-15-115-7333
Fusible Plug

151157333
0172401097: RNCC: 3 | RNVC: 2

18 Sep 1993

5340-15-153-5204
Access Cover

151535204
142041807: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-007-2633
Retaining Strap

150072633
1390159: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-187-8256
Mounting Bracket

151878256
018.067.00.26: RNCC: 3 | RNVC: 2
(241)A6479018.067.00.26: RNCC: 5 | RNVC: 2
018.067.00.26: RNCC: 5 | RNVC: 2

7 May 2009

5340-15-118-0933
Loop Clamp

151180933
D0485602: RNCC: 3 | RNVC: 2

20 Dec 1994

5340-15-178-9444
Mounting Bracket

151789444
TK163MD031AA00: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-15-109-6229
Loop Clamp

151096229
002888: RNCC: 3 | RNVC: 2

2 Dec 1989

5340-15-100-6849
Bridge Clamp

151006849
W000134: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-118-3416
Loop Clamp

151183416
60143036: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-104-4372
Expansion Plug

151044372
2.3170.022.1: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-063-5118
Strap Hinge

150635118
60116893: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-002-3150
Mounting Bracket

150023150
504370787: RNCC: 3 | RNVC: 2

6 Aug 2013

5340-15-118-0748
Spring Holder

151180748
D0487685: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-204-3768
Mounting Bracket

152043768
0752164: RNCC: 3 | RNVC: 2
0752164: RNCC: 5 | RNVC: 2

26 Oct 2011

5340-15-001-4335
Mounting Bracket

150014335
500437725: RNCC: 3 | RNVC: 2

2 Jul 2013

5340-15-060-2710
Mending Plate

150602710
4-02250: RNCC: 3 | RNVC: 2

9 Feb 1977

5340-15-187-4630
Rim Latch

151874630
368-2908: RNCC: 3 | RNVC: 2
(241)AA136368-2908: RNCC: 5 | RNVC: 2

2 Apr 2009

5340-15-101-4245
Plain Solid Disk

151014245
1576-06-553: RNCC: 3 | RNVC: 2
157606553: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-102-1657
Plain Solid Disk

151021657
8222-02-33: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-005-1975
Spring Holder

150051975
109-0101-98-1: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-102-4683
Butt Hinge Leaf

151024683
01-261-10-196: RNCC: 3 | RNVC: 2

19 Feb 1987

5340-15-007-2402
Retaining Strap

150072402
1398424: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-119-1887
Access Cover

151191887
75214978: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-009-1459
Catch Strike

150091459
4259821: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-162-2485
Mounting Plate

151622485
131876: RNCC: 3 | RNVC: 2
M7946281: RNCC: 5 | RNVC: 2

17 May 2001

5340-15-000-4363
Loop Clamp

150004363
425105007012: RNCC: 3 | RNVC: 2

1 Mar 2013

5340-15-157-6745
Mounting Bracket

151576745
11031926: RNCC: 3 | RNVC: 2
(241)A977211031926: RNCC: 5 | RNVC: 2

15 Oct 2003

5340-15-179-7029
Mounting Bracket

151797029
0000500413630: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-207-7132
Butt Hinge

152077132
1425036: RNCC: 3 | RNVC: 2
(241)AB8331425036: RNCC: 5 | RNVC: 2

12 Nov 2012

5340-15-118-4853
Rod End Connector

151184853
33431/5: RNCC: 3 | RNVC: 2
33431/5: RNCC: 5 | RNVC: 9

7 Feb 1995

5340-15-153-6882
Loop Clamp

151536882
142068034: RNCC: 3 | RNVC: 2

20 Feb 2001

5340-15-150-0314
Strap Fastener Loop

151500314
204-8120-06-1: RNCC: 3 | RNVC: 2

15 Jul 1999

5340-15-062-7262
Angle Bracket

150627262
1141-31-107: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-061-4153
Retaining Strap

150614153
P-125391-001: RNCC: 3 | RNVC: 2
P125391-001: RNCC: 5 | RNVC: 2

20 Jan 1978

5340-15-001-5546
Access Cover

150015546
182719053: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-15-108-9903
Retaining Strap

151089903
60111928: RNCC: 3 | RNVC: 2

9 May 1988

5340-15-108-7976
Retaining Strap

151087976
1378550: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-152-0018
Angle Bracket

151520018
60123942: RNCC: 3 | RNVC: 2

31 Jul 2000

5340-15-064-7672
Mending Plate

150647672
23.78.58.00: RNCC: 3 | RNVC: 2

26 Dec 1983

5340-15-122-3276
Spring Tension Clip

151223276
17722074: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-103-1006
Loop Clamp

151031006
DE013.12.196: RNCC: 3 | RNVC: 2
(241)A5015DE013.12.196: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-107-5059
Loop Clamp

151075059
8588211: RNCC: 3 | RNVC: 2
60178230: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-107-2519
Mending Plate

151072519
3424-15: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-146-7308
Threaded Rod End

151467308
SMG-12.45: RNCC: 3 | RNVC: 2

2 Jul 2001

5340-15-118-7543
Butt Hinge

151187543
9434654: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-149-3338
Loop Clamp

151493338
98436756: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-109-4078
Retaining Strap

151094078
5139-218-08: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-002-8089
Mounting Bracket

150028089
504380870: RNCC: 3 | RNVC: 2

3 Oct 2013

5340-15-007-2191
Retaining Strap

150072191
1395933: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-148-5333
Lock-Release Lever

151485333
93191486: RNCC: 3 | RNVC: 2

13 Aug 1999

5340-15-007-2548
Angle Bracket

150072548
1382151: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-118-3386
Angle Bracket

151183386
60146680: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-116-4845
Clamping Catch

151164845
60151164: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-192-5318
Mounting Plate

151925318
RDS-RGD II: RNCC: 3 | RNVC: 2

25 Mar 2010

5340-15-206-9704
Mounting Bracket

152069704
G92534: RNCC: 3 | RNVC: 2
(241)A1823G92534: RNCC: 5 | RNVC: 2

3 Aug 2012

5340-15-193-9271
Mounting Bracket

151939271
RVAR170970-9: RNCC: 3 | RNVC: 2
(241)AF517RVAR170970-9: RNCC: 5 | RNVC: 2

29 Jul 2010

5340-15-188-1174
Luggage Handle

151881174
1510/6: RNCC: 3 | RNVC: 2

13 Jul 2009

5340-15-157-0619
Tee Hinge

151570619
DIS.629 MARINARSEN SP CERNIERA: RNCC: 3 | RNVC: 2

28 Apr 2003

5340-15-199-5117
Stand Base

151995117
162530185: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-15-118-8114
Mounting Bracket

151188114
EDS10003: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-003-1569
Mounting Bracket

150031569
500423064: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-089-5804
Butt Hinge

150895804
16956-100: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-116-2314
Screw Thread Insert

151162314
2100-02565: RNCC: 3 | RNVC: 2
210002565: RNCC: 3 | RNVC: 2
M6(X1)X2D: RNCC: 3 | RNVC: 2

30 Mar 1993

5340-15-068-5063
Plug Button

150685063
999-5001-10-148: RNCC: 3 | RNVC: 2

9 Dec 1985

5340-15-057-8951
Rod End Clevis

150578951
P44HB83: RNCC: 5 | RNVC: 2
P44HB83: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-181-2955
Shelf Bracket

151812955
PAAE110673: RNCC: 3 | RNVC: 2

25 Nov 2008

5340-15-103-0708
Angle Bracket

151030708
DE013.12.888: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-179-7183
Angle Bracket

151797183
0000500403725: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-115-9120
Butt Hinge Leaf

151159120
NOR2-481-06: RNCC: 3 | RNVC: 2

1 Feb 1993

5340-15-202-4580
Screw Thread Insert

152024580
920-0231/48: RNCC: 3 | RNVC: 2
(241)A4582920-0231/48: RNCC: 5 | RNVC: 2

27 Mar 2007

5340-15-109-3762
Angle Bracket

151093762
5137-344-06: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-005-5315
Lock-Release Lever

150055315
1026-04-181: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-120-1426
Butt Hinge

151201426
113A6031-753: RNCC: 3 | RNVC: 2

16 Jan 1995

5340-15-201-3097
Loop Clamp

152013097
17764694: RNCC: 3 | RNVC: 2
(241)A311417764694: RNCC: 5 | RNVC: 2
(241)A424917764694: RNCC: 5 | RNVC: 2
17764694: RNCC: 5 | RNVC: 2

23 Jul 2006

5340-15-153-3562
Access Cover

151533562
WW205466DR: RNCC: 1 | RNVC: 2
WW205466DR: RNCC: 5 | RNVC: 9

19 Dec 2000

5340-15-148-3477
Mending Plate

151483477
102185: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-157-6147
Angle Bracket

151576147
11031202: RNCC: 3 | RNVC: 2
(241)A977211031202: RNCC: 5 | RNVC: 2

9 Oct 2003

5340-15-071-7355
Handle Grip

150717355
190B: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-118-4554
Retaining Strap

151184554
60149872: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-004-9087
Mending Plate

150049087
135-262: RNCC: 3 | RNVC: 2

20 May 1978

5340-15-002-8148
Mounting Plate

150028148
5801359998: RNCC: 3 | RNVC: 2

3 Oct 2013

5340-15-103-6592
Mending Plate

151036592
24009129A: RNCC: 3 | RNVC: 2

26 Nov 1987

5340-15-111-9254
Angle Bracket

151119254
897667: RNCC: 3 | RNVC: 2

10 Sep 1989

5340-15-005-1309
Rod End Connector

150051309
20835-101A1: RNCC: 3 | RNVC: 2

23 Nov 1978

5340-15-060-1450
Screw Thread Insert

150601450
1276-17-135: RNCC: 3 | RNVC: 2
127617135: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-206-3565
Mounting Plate

152063565
50040 6179: RNCC: 3 | RNVC: 2

4 Jun 2012

5340-15-108-7607
Angle Bracket

151087607
60137418: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-109-8673
Angle Bracket

151098673
8581809: RNCC: 3 | RNVC: 2

15 Oct 1988

5340-15-186-7751
Latch Bar

151867751
504100896: RNCC: 3 | RNVC: 2
0000504100896: RNCC: 3 | RNVC: 2

5 Jan 2009

5340-15-108-5212
Butt Hinge Leaf

151085212
60122042: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-067-5428
Angle Bracket

150675428
500045: RNCC: 2 | RNVC: 2
500045: RNCC: 5 | RNVC: 9

11 Feb 1986

5340-15-124-7271
Handle Grip

151247271
8568830: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-109-8228
Handle Grip

151098228
68-561003-015: RNCC: 3 | RNVC: 2

21 Mar 1990

5340-15-151-7788
Door Handle

151517788
0-110313: RNCC: 3 | RNVC: 2
1PA39630-110313: RNCC: 5 | RNVC: 2
(241)A39630-110313: RNCC: 5 | RNVC: 2

10 Jul 2000

5340-15-009-4834
Retaining Band

150094834
SESSTAVEC0152010-152009: RNCC: 3 | RNVC: 2
SESSTAVEC0152010-152009: RNCC: 5 | RNVC: 9

22 Oct 1980

5340-15-120-3535
Loop Clamp

151203535
17315990: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-103-0013
Rod End Connector

151030013
79005602: RNCC: 3 | RNVC: 2

21 Jun 1987

5340-15-194-1974
Mounting Bracket

151941974
6102330120: RNCC: 3 | RNVC: 2

1 Oct 2010

5340-15-062-4761
Access Door Hinge

150624761
109-0503-18-2: RNCC: 3 | RNVC: 2

29 Apr 1982

5340-15-065-2546
Hand Crank

150652546
000202309000: RNCC: 5 | RNVC: 2
000202309000: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-179-6817
Webbing Strap

151796817
0000500404456: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-194-3600
Block Clamp

151943600
109-0519-32-109: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-15-112-8758
Screw Thread Insert

151128758
60152896: RNCC: 3 | RNVC: 2

16 Sep 1989

5340-15-179-9053
Mounting Plate

151799053
D1410102: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-181-1718
Control Rod

151811718
178950226: RNCC: 3 | RNVC: 2
(241)A0199178950226: RNCC: 5 | RNVC: 2

5 Nov 2008

5340-15-163-3994
Access Cover

151633994
9844643: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-058-4556
Retaining Strap

150584556
538-16-1560: RNCC: 3 | RNVC: 2

10 May 1975

5340-15-100-1959
Spring Holder

151001959
88331-14A: RNCC: 3 | RNVC: 2

29 Sep 1985

5340-15-179-2700
Mounting Bracket

151792700
D1-85108-402: RNCC: 3 | RNVC: 2

10 Aug 2006

5340-15-111-2802
Bow Handle

151112802
M443-140: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-154-2097
Angle Bracket

151542097
0-169201: RNCC: 3 | RNVC: 2
(241)A39630-169201: RNCC: 5 | RNVC: 2
1PA39630-169201: RNCC: 5 | RNVC: 2

28 Mar 2001

5340-15-115-3525
Retaining Strap

151153525
538-16-1670: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-205-1791
Retaining Band

152051791
A103124: RNCC: 3 | RNVC: 2
23110: RNCC: 3 | RNVC: 2
(241)A462923110: RNCC: 5 | RNVC: 2

22 Feb 2012

5340-15-150-6020
Angle Bracket

151506020
105945: RNCC: 3 | RNVC: 2

6 Dec 1999

5340-15-195-8600
Mounting Plate

151958600
A0008130436: RNCC: 3 | RNVC: 2
(241)AJ611A0008130436: RNCC: 5 | RNVC: 2

23 May 2011

5340-15-107-8766
Angle Bracket

151078766
60119317: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-057-8103
Screw Thread Insert

150578103
1376-05-183: RNCC: 3 | RNVC: 2
137605183: RNCC: 5 | RNVC: 2

31 Dec 1975

5340-15-113-1674
Angle Bracket

151131674
277A2221-001: RNCC: 3 | RNVC: 2

7 Oct 1990

5340-15-145-0347
Access Cover

151450347
541-16-0200: RNCC: 3 | RNVC: 2

3 Dec 1999

5340-15-058-4011
Retaining Strap

150584011
553816154000: RNCC: 2 | RNVC: 3
538-16-1540: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-005-7004
Butt Hinge Leaf

150057004
A1-16205-001: RNCC: 3 | RNVC: 2
A1-16205-001: RNCC: 5 | RNVC: 9

10 Apr 1979

5340-15-089-5823
Butt Hinge

150895823
16936-075: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-203-9724
Handwheel

152039724
GN. 25341: RNCC: 3 | RNVC: 2
(241)A486752001171: RNCC: 5 | RNVC: 2
52001171: RNCC: 5 | RNVC: 2

29 Jul 2011

5340-15-109-1842
Angle Bracket

151091842
1370706: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-124-6310
Angle Bracket

151246310
4696559: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-204-3514
Snap Hook

152043514
25100009: RNCC: 3 | RNVC: 2
(241)ACA6425100009: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-124-7563
Handle Grip

151247563
IMPUGNATURA: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-137-3759
Angle Bracket

151373759
V26856: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-065-3808
Access Door Hinge

150653808
206-1015-56-25: RNCC: 3 | RNVC: 2

4 Sep 1984

5340-15-121-0859
Vent Plug

151210859
SF0125-POLIP: RNCC: 3 | RNVC: 2

22 Dec 1995

5340-15-155-0492
Angle Bracket

151550492
J92440227-002: RNCC: 3 | RNVC: 2

9 Jan 2002

5340-15-204-4118
Runner

152044118
T410: RNCC: 3 | RNVC: 2

2 Nov 2011

5340-15-107-5067
Spring Tension Clip

151075067
7165200: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-122-0546
Mounting Bracket

151220546
98451780: RNCC: 3 | RNVC: 2

23 Apr 1996

5340-15-055-4293
Loop Clamp

150554293
7-8945-901-99351: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-115-4916
Rod End Clevis

151154916
M910-20-11-17: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-005-4064
Door Handle

150054064
1137-05-330: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-113-8614
Loop Clamp

151138614
550/9-290: RNCC: 3 | RNVC: 2

13 Oct 1994

5340-15-203-7294
Mounting Plate

152037294
00608R0300: RNCC: 3 | RNVC: 2
00608R0300: RNCC: 5 | RNVC: 2
CV173836: RNCC: 5 | RNVC: 2

27 Jun 2011

5340-15-118-4024
Angle Bracket

151184024
60167965: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-204-4622
Mounting Plate

152044622
504302976: RNCC: 3 | RNVC: 2

7 Nov 2011

5340-15-153-3930
Mending Plate

151533930
5137-331-06: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-001-0401
Mounting Bracket

150010401
219AE3169-119: RNCC: 3 | RNVC: 2

21 May 2013

5340-15-187-6215
Retaining Clip

151876215
VI/PC: RNCC: 3 | RNVC: 2
(241)AH405VI/PC: RNCC: 5 | RNVC: 2

15 Apr 2009

5340-15-111-3795
Strap Hinge

151113795
113A6022-008: RNCC: 3 | RNVC: 2

7 Sep 1990

5340-15-188-6045
Mounting Bracket

151886045
301789: RNCC: 3 | RNVC: 2

13 Oct 2009

5340-15-179-0003
T Bracket

151790003
RS 411 780 A: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-177-4091
Mounting Bracket

151774091
045377: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-206-9703
Mounting Bracket

152069703
G92532: RNCC: 3 | RNVC: 2
(241)A1823G92532: RNCC: 5 | RNVC: 2

3 Aug 2012

5340-15-203-7247
Loop Clamp

152037247
00375R0450: RNCC: 3 | RNVC: 2
00375R0450: RNCC: 5 | RNVC: 2
CV173786: RNCC: 5 | RNVC: 2

27 Jun 2011

5340-15-112-3540
Strap Hinge

151123540
60150816: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-179-7175
Mounting Bracket

151797175
0000500400291: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-150-5407
Bow Handle

151505407
341-8164/01: RNCC: 3 | RNVC: 2

30 Nov 1999

5340-15-187-2014
Mounting Bracket

151872014
SC 100 640: RNCC: 3 | RNVC: 2
(241)A3980SC100640: RNCC: 5 | RNVC: 2

24 Feb 2009

5340-15-116-2313
Screw Thread Insert

151162313
M5(X0,8)X2D: RNCC: 3 | RNVC: 2
210002564: RNCC: 5 | RNVC: 2

30 Mar 1993

5340-15-178-6065
Mounting Bracket

151786065
SF260-05-405-13PR: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-004-5502
Butt Hinge

150045502
MS20001P4-400: RNCC: 3 | RNVC: 2

9 Dec 2013

5340-15-118-6517
Angle Bracket

151186517
70688829: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-203-0315
Angle Bracket

152030315
1120080: RNCC: 3 | RNVC: 2
(241)A50091120080: RNCC: 5 | RNVC: 2

19 Nov 2007

5340-15-064-5895
Angle Bracket

150645895
60112943: RNCC: 3 | RNVC: 2

17 Nov 1983

5340-15-118-0747
Spring Holder

151180747
D0471780: RNCC: 3 | RNVC: 2

16 Dec 1994

5340-15-156-0791
Mounting Plate

151560791
807068: RNCC: 3 | RNVC: 2
(241)S7177807068: RNCC: 5 | RNVC: 2

20 Nov 2002

5340-15-063-3200
Angle Bracket

150633200
60104901: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-150-6015
Angle Bracket

151506015
104493: RNCC: 3 | RNVC: 2

6 Dec 1999

5340-15-117-4879
Retaining Strap

151174879
21367-001D00: RNCC: 3 | RNVC: 2

27 Oct 1993

5340-15-107-0543
Spring Holder

151070543
4229525: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-158-6060
Stand Base

151586060
122606486: RNCC: 3 | RNVC: 2

10 Mar 2004

5340-15-103-8213
Retaining Strap

151038213
23949-101: RNCC: 3 | RNVC: 2

12 Feb 1988

5340-15-052-2229
Rod End Clevis

150522229
N0R5-218-03-5: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-147-7818
Mounting Bracket

151477818
39A2213-06-01: RNCC: 3 | RNVC: 2

10 Apr 1998

5340-15-053-0669
Screw Thread Insert

150530669
26T038P005: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-117-4188
Rod End Clevis

151174188
142502222: RNCC: 3 | RNVC: 2

4 Oct 1993

5340-15-000-4009
Lock Key

150004009
29.00738.14: RNCC: 3 | RNVC: 2

27 Feb 2013

5340-15-194-7854
Mending Plate

151947854
58287: RNCC: 3 | RNVC: 2
(241)A348858287: RNCC: 5 | RNVC: 2

14 Jan 2011

5340-15-120-0211
Mending Plate

151200211
70915589: RNCC: 3 | RNVC: 2

5 Dec 1994

5340-15-102-1197
Retaining Band

151021197
V44/1-03-210: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-116-1619
Retaining Strap

151161619
08224-101A02: RNCC: 3 | RNVC: 2
08224-101A2: RNCC: 5 | RNVC: 2

17 Mar 1993

5340-15-133-5305
Angle Bracket

151335305
64-00-051-0: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-101-7893
Angle Bracket

151017893
10002-000: RNCC: 3 | RNVC: 2

9 Jul 1987

5340-15-177-3065
Mounting Bracket

151773065
P-842703-004: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-156-8089
Bail Handle

151568089
94UJ04343196S01-411: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-15-067-0101
Retaining Ring

150670101
27046F: RNCC: 2 | RNVC: 2

1 Apr 1998

5340-15-122-2609
Loop Clamp

151222609
800033273: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-177-3680
Loop Clamp

151773680
017116: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-151-6847
Threaded Rod End

151516847
17721211: RNCC: 3 | RNVC: 2

27 Jun 2000

5340-15-124-6564
Angle Bracket

151246564
4725148: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-113-8235
Handle Grip

151138235
37966946100: RNCC: 3 | RNVC: 2
93155237: RNCC: 5 | RNVC: 2

6 Mar 1992

5340-15-168-9896
Coat And Hat Hook

151689896
F72004319: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-113-0120
Angle Bracket

151130120
37956946200: RNCC: 3 | RNVC: 2
93155428: RNCC: 5 | RNVC: 2

23 Feb 1989

5340-15-116-4128
Access Cover

151164128
W013682: RNCC: 3 | RNVC: 2

24 Dec 1993

5340-15-002-3069
Mounting Plate

150023069
5801363662: RNCC: 3 | RNVC: 2

5 Aug 2013

5340-15-054-9853
Shelf Bracket

150549853
204-4610-14-1: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-102-2199
Angle Bracket

151022199
109-0761-75-1: RNCC: 3 | RNVC: 2

16 Dec 1986

5340-15-002-1392
Mounting Bracket

150021392
5801390568: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-177-4337
Bridge Clamp

151774337
051152: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-121-6437
Mounting Bracket

151216437
800045198: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-179-9401
Mounting Bracket

151799401
504161619: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-163-3794
Bridge Clamp

151633794
9443876: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-007-1891
Retaining Strap

150071891
1387376: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-118-2040
Screw Thread Insert

151182040
13582211: RNCC: 3 | RNVC: 2

22 Apr 1994

5340-15-150-0887
Loop Clamp

151500887
016020040: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-151-6488
Access Cover

151516488
J52452048-001: RNCC: 3 | RNVC: 2

21 Jun 2000

5340-15-130-1906
Angle Bracket

151301906
719335: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-179-5781
Clip Retainer Plate

151795781
329A01355-101: RNCC: 3 | RNVC: 2

11 Apr 2007

5340-15-060-9340
Bow Handle

150609340
F452C1A-55: RNCC: 3 | RNVC: 2
F452C1A-55: RNCC: 5 | RNVC: 2

15 Jan 1985

5340-15-112-8012
Rod End Clevis

151128012
352A1079-001: RNCC: 3 | RNVC: 2

27 Oct 1990

5340-15-008-0701
Angle Bracket

150080701
60112955: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-152-4873
Access Cover

151524873
60128891: RNCC: 3 | RNVC: 2

19 Sep 2000

5340-15-103-8275
Angle Bracket

151038275
4229252: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-074-3953
Retaining Strap

150743953
6UNI2134CD: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-045-3918
Webbing Strap

150453918
N0R4-109-00-6: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-118-0881
Handle Grip

151180881
I.132/90: RNCC: 3 | RNVC: 2

20 Dec 1994

5340-15-178-7303
Mounting Plate

151787303
390-1730/01.01: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-061-2490
Access Door Hinge

150612490
26276-101A1: RNCC: 3 | RNVC: 2
26276-101A01: RNCC: 5 | RNVC: 2

31 Aug 1977

5340-15-205-3591
Caster Wheel

152053591
30/6164-16: RNCC: 3 | RNVC: 2

2 Mar 2012

5340-15-073-8914
Flush Lock

150738914
13B65X35-3LEVE: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-119-0067
Tubular Fairlead

151190067
70023176: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-206-0123
Retaining Band

152060123
321948F01: RNCC: 3 | RNVC: 2

2 May 2012

5340-15-149-8110
Access Cover

151498110
129226: RNCC: 3 | RNVC: 2
0052442: RNCC: 5 | RNVC: 2

2 Jun 1999

5340-15-122-0558
Rod End Connector

151220558
28009GR92: RNCC: 3 | RNVC: 2
28009GR92: RNCC: 5 | RNVC: 9

23 Apr 1996

5340-15-045-4405
Loop Clamp

150454405
781-12-76: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-160-3693
Coat And Hat Hook

151603693
F720046311: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-202-3792
Mending Plate

152023792
633757-5: RNCC: 3 | RNVC: 2

5 Mar 2007

5340-15-089-5808
Butt Hinge

150895808
16950-100: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-179-6213
Mounting Bracket

151796213
G2285M/38B: RNCC: 3 | RNVC: 2

10 May 2007

5340-15-006-9211
Rod End Clevis

150069211
NOR5-225-15-5: RNCC: 3 | RNVC: 2

30 May 1980

5340-15-150-1037
Mounting Bracket

151501037
120013653: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-065-1100
Loop Clamp

150651100
23.12.69.00: RNCC: 3 | RNVC: 2

26 Dec 1983

5340-15-193-1954
Loop Clamp

151931954
16950: RNCC: 3 | RNVC: 2

20 Apr 2010

5340-15-204-0549
Bridge Clamp

152040549
500332591: RNCC: 3 | RNVC: 2
0059071: RNCC: 5 | RNVC: 2

23 Aug 2011

5340-15-193-8034
Mounting Bracket

151938034
60673244: RNCC: 3 | RNVC: 2
(241)A293060673244: RNCC: 5 | RNVC: 2

19 Jul 2010

5340-15-170-3951
Access Cover

151703951
D6234.0002: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-153-8098
Retaining Strap

151538098
01100A126020: RNCC: 5 | RNVC: 3
01100A126020: RNCC: 5 | RNVC: 9

1 Mar 2001

5340-15-109-5063
Retaining Strap

151095063
93803141: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-118-8875
Access Cover

151188875
588985936B: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-153-2924
Rod End Clevis

151532924
122508126: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-15-153-5188
Access Cover

151535188
142018116: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-165-0369
Handle Grip

151650369
8594: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-120-4452
Mending Plate

151204452
142507287: RNCC: 3 | RNVC: 2

25 May 1995

5340-15-177-3536
Access Cover

151773536
02.899: RNCC: 3 | RNVC: 2
P00489: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-149-3038
Angle Bracket

151493038
4885401: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-100-2574
Mending Plate

151002574
039S: RNCC: 3 | RNVC: 2

17 Oct 1986

5340-15-207-8712
Mounting Plate

152078712
504374862: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-129-3331
Angle Bracket

151293331
120689: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-147-5985
Mounting Bracket

151475985
835140-01: RNCC: 3 | RNVC: 2
835140-01: RNCC: 5 | RNVC: 9

30 Dec 1997

5340-15-045-3570
Retaining Strap

150453570
740-20-18: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-118-3388
Angle Bracket

151183388
60146322: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-073-5240
Rim Lock Set

150735240
18300-007: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-062-8472
Screw Thread Insert

150628472
1073-102: RNCC: 3 | RNVC: 2

16 Dec 1981

5340-15-050-6287
Retaining Band

150506287
6R2533-100-41548: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-149-7075
Protection Bellows

151497075
109-0700-25-127: RNCC: 3 | RNVC: 2

7 May 1999

5340-15-118-3405
Loop Clamp

151183405
60141662: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-118-4508
Angle Bracket

151184508
60147399: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-006-4055
Handle Grip

150064055
1376157: RNCC: 3 | RNVC: 2
1376157: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-106-7616
Trigger Guard

151067616
980813: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-007-9152
Angle Bracket

150079152
1391112: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-151-9430
Angle Bracket

151519430
0-174277: RNCC: 3 | RNVC: 2
00174277: RNCC: 3 | RNVC: 2
1PA39630-174277: RNCC: 5 | RNVC: 2
(241)A39630-174277: RNCC: 5 | RNVC: 2

26 Jul 2000

5340-15-206-5120
Mounting Bracket

152065120
109-0717-98-139: RNCC: 3 | RNVC: 2

20 Jun 2012

5340-15-148-5799
Butt Hinge Leaf

151485799
129-0340-01-213: RNCC: 3 | RNVC: 2

31 Aug 1998

5340-15-117-1975
Retaining Strap

151171975
180508103: RNCC: 3 | RNVC: 2

2 Sep 1993

5340-15-193-9686
Mortise Lock Set

151939686
655.910: RNCC: 3 | RNVC: 2

10 Aug 2010

5340-15-180-9087
Control Rod

151809087
C72173: RNCC: 3 | RNVC: 2
(241)A0178C72173: RNCC: 5 | RNVC: 2

4 Aug 2008

5340-15-008-1825
Retaining Band

150081825
60114493: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-116-4900
Bow Handle

151164900
60149387: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-103-0709
Angle Bracket

151030709
DE013.12.889: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-122-5875
Cushioning Pad

151225875
D1286068: RNCC: 3 | RNVC: 2
D1286068: RNCC: 5 | RNVC: 2

10 Sep 1996

5340-15-207-8720
Mounting Plate

152078720
504375202: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-152-6877
Butt Hinge

151526877
0-179303: RNCC: 3 | RNVC: 2
00179303: RNCC: 3 | RNVC: 2
1PA39630-179303: RNCC: 5 | RNVC: 2
(241)A39630-179303: RNCC: 5 | RNVC: 2

11 Oct 2000

5340-15-040-2214
Loop Clamp

150402214
2-2537-403-27833: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-073-5627
Flush Lock

150735627
19890-030: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-195-8130
Mounting Bracket

151958130
380050: RNCC: 3 | RNVC: 2
(241)AJ611380050: RNCC: 5 | RNVC: 2

16 May 2011

5340-15-111-9306
Retaining Strap

151119306
60120176: RNCC: 3 | RNVC: 2

10 Sep 1989

5340-15-068-1860
Screw Thread Insert

150681860
476718: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-15-109-1822
Mending Plate

151091822
1390334: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-008-1815
Angle Bracket

150081815
60114310: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-060-9478
Mending Plate

150609478
F403B4: RNCC: 3 | RNVC: 2
F403B-4: RNCC: 5 | RNVC: 2
F403B-4: RNCC: 5 | RNVC: 2

20 May 1977

5340-15-005-7020
Butt Hinge Leaf

150057020
A1-23236-005: RNCC: 3 | RNVC: 2
A1-23236-005: RNCC: 5 | RNVC: 9

10 Apr 1979

5340-15-151-2163
Loop Clamp

151512163
00085731: RNCC: 3 | RNVC: 2

28 Apr 2000

5340-15-073-5263
Flush Lock

150735263
73-70X68: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-179-7212
Threaded Rod End

151797212
18007714: RNCC: 3 | RNVC: 2
(241)A424918007714: RNCC: 5 | RNVC: 2

7 Jun 2007

5340-15-103-0337
Angle Bracket

151030337
79029742: RNCC: 3 | RNVC: 2

21 Jun 1987

5340-15-121-6081
Mounting Plate

151216081
8A0039969: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-197-5417
Door Closer

151975417
PN UAS 00029137: RNCC: 3 | RNVC: 2
5340F76026965: RNCC: 5 | RNVC: 9

8 Apr 2004

5340-15-127-6182
Retaining Ring

151276182
4016278: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-137-0742
Handle Grip

151370742
60335: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-103-2674
Support Hook

151032674
5176-239-00: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-198-4114
Access Cover

151984114
122505190: RNCC: 3 | RNVC: 2

27 Sep 2004

5340-15-170-0838
Angle Bracket

151700838
F72021404: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-001-2201
Snap Hook

150012201
HK.H.I. 003-001: RNCC: 3 | RNVC: 2

4 Jun 2013

5340-15-179-9560
Mounting Plate

151799560
00195042: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-194-7852
Mending Plate

151947852
58861: RNCC: 3 | RNVC: 2
(241)A348858861: RNCC: 5 | RNVC: 2

14 Jan 2011

5340-15-000-4333
Retaining Band

150004333
4260036200N: RNCC: 3 | RNVC: 2

1 Mar 2013

5340-15-231-9522
Angle Bracket

152319522
42309292: RNCC: 3 | RNVC: 2
254015E152748: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-156-7709
Leather Strap

151567709
L-MT1: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-15-009-7552
Angle Bracket

150097552
1003-003/P001: RNCC: 3 | RNVC: 2

26 Aug 1980

5340-15-004-8022
Angle Bracket

150048022
P-110577-003: RNCC: 3 | RNVC: 2
P-110578-003: RNCC: 3 | RNVC: 2
P110578-003: RNCC: 3 | RNVC: 2
P-110578-003: RNCC: 3 | RNVC: 2
P110577-003: RNCC: 5 | RNVC: 2

18 Jul 1978

5340-15-118-3387
Angle Bracket

151183387
60146321: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-118-7983
Access Cover

151187983
4782886: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-068-7271
Angle Bracket

150687271
270767A3: RNCC: 3 | RNVC: 2

14 Jun 1985

5340-15-168-7089
Angle Bracket

151687089
MP2000: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-120-3044
Flush Catch

151203044
93156381: RNCC: 3 | RNVC: 2

20 Mar 1995

5340-15-179-7121
Protection Bellows

151797121
93163423: RNCC: 3 | RNVC: 2
(241)A424993163423: RNCC: 5 | RNVC: 2

7 Jun 2007

5340-15-064-3728
Plug Button

150643728
4234280: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-074-3980
Retaining Strap

150743980
10UNI2136CD: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-074-3939
Retaining Strap

150743939
B22UNAV1046A37UN1743CD: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-113-8553
Lock-Release Lever

151138553
1Q 530091: RNCC: 3 | RNVC: 2
1Q 530091: RNCC: 5 | RNVC: 9

21 Jan 1998

5340-15-062-1688
Angle Bracket

150621688
26050.0000: RNCC: 5 | RNVC: 2
4-26050C: RNCC: 5 | RNVC: 2
26050.0000: RNCC: 5 | RNVC: 9
4-26050C: RNCC: 5 | RNVC: 9

28 Sep 1981

5340-15-188-0833
Mounting Bracket

151880833
0000527034: RNCC: 3 | RNVC: 2

1 Jul 2009

5340-15-001-1831
Access Cover

150011831
1125UBA0373A: RNCC: 3 | RNVC: 2

3 Jun 2013

5340-15-109-1807
Retaining Strap

151091807
74990260: RNCC: 3 | RNVC: 2
4175249: RNCC: 5 | RNVC: 2
74990260: RNCC: 5 | RNVC: 9

20 Apr 1988

5340-15-102-1592
Mending Plate

151021592
8211.01.16: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-004-7670
Retaining Strap

150047670
68154-101A1: RNCC: 3 | RNVC: 2

10 Apr 1978

5340-15-122-0992
Retaining Strap

151220992
D0592700: RNCC: 3 | RNVC: 2

24 Sep 1996

5340-15-063-9375
Bow Handle

150639375
1113-17-901: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-007-7704
Angle Bracket

150077704
4614110: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-160-5028
Coat And Hat Hook

151605028
F720018281: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-156-9459
Loop Clamp

151569459
EN4113F10NH: RNCC: 2 | RNVC: 2

18 Mar 2003

5340-15-194-8429
Mounting Bracket

151948429
76066898: RNCC: 3 | RNVC: 2

25 Jan 2011

5340-15-150-0936
Access Cover

151500936
040080195: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-153-9596
Loop Clamp

151539596
230026535: RNCC: 3 | RNVC: 2
G50/70UNI9209ACC.INOX-ZN: RNCC: 5 | RNVC: 2

12 Mar 2001

5340-15-118-4549
Retaining Strap

151184549
60155700: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-156-3369
Expansion Plug

151563369
(241)A3460CBD71232P03: RNCC: 3 | RNVC: 2
CBD71232P03: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-15-005-3559
Loop Clamp

150053559
1-04500-90: RNCC: 3 | RNVC: 2
1-04500-90: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-122-2453
Mounting Bracket

151222453
80A052354: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-105-8389
Retaining Band

151058389
2.6850.014.0: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-007-2413
Loop Clamp

150072413
4027910: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-061-5965
Angle Bracket

150615965
P-120144-001: RNCC: 3 | RNVC: 2
P120144-001: RNCC: 5 | RNVC: 2

2 Mar 1978

5340-15-207-8596
Mounting Plate

152078596
5801328070: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-198-5137
Bow Handle

151985137
C14N1107A: RNCC: 3 | RNVC: 2
(241)SH469C14N1107A: RNCC: 5 | RNVC: 2

7 Oct 2004

5340-15-007-9520
Plug Button

150079520
4445424: RNCC: 3 | RNVC: 2
4445424: RNCC: 5 | RNVC: 9

22 Sep 1979

5340-15-119-1257
Rod End Connector

151191257
73121782: RNCC: 3 | RNVC: 2

4 Jul 1994

Load More Results