What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 21 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 21 of 72

5340-15-145-0644
Retaining Band

151450644
105.3088: RNCC: 3 | RNVC: 2

7 Apr 1997

5340-15-231-2847
Handle Grip

152312847
3X41380020: RNCC: 3 | RNVC: 2
109515E067321: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-120-8272
Mending Plate

151208272
2.7.0425: RNCC: 3 | RNVC: 2

25 Aug 1995

5340-15-117-1621
Straight Pin

151171621
101 081: RNCC: 3 | RNVC: 2

12 Aug 1993

5340-15-149-0220
Rod End Clevis

151490220
00010601: RNCC: 3 | RNVC: 2

17 Nov 1998

5340-15-149-3130
Angle Bracket

151493130
4886029: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-168-9626
Coat And Hat Hook

151689626
F72003361: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-105-8397
Retaining Band

151058397
135/283: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-129-0329
Angle Bracket

151290329
4111958: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-109-5769
Angle Bracket

151095769
20970190A: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-074-3961
Retaining Strap

150743961
20VNI2134CD: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-119-1374
Mending Plate

151191374
73125012: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-116-4911
Retaining Strap

151164911
60149934: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-109-1214
Plug Button

151091214
4158784: RNCC: 3 | RNVC: 2

30 Apr 1988

5340-15-111-7970
Strap Hinge

151117970
32123/2: RNCC: 3 | RNVC: 2

1 Jul 1990

5340-15-162-9959
Mounting Bracket

151629959
118170: RNCC: 3 | RNVC: 2

9 Apr 2002

5340-15-063-0606
Retaining Strap

150630606
0-100361: RNCC: 3 | RNVC: 2

30 Apr 1982

5340-15-007-0759
Retaining Ring

150070759
0-02617: RNCC: 3 | RNVC: 2
0-33951: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-179-1970
Mounting Bracket

151791970
AC913: RNCC: 3 | RNVC: 2

13 Jun 2006

5340-15-109-5968
Expansion Plug

151095968
10158650: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-151-6082
Mending Plate

151516082
42021321: RNCC: 3 | RNVC: 2

19 Jun 2000

5340-15-181-1764
Loop Clamp

151811764
179040104: RNCC: 3 | RNVC: 2
(241)A0199179040104: RNCC: 5 | RNVC: 2

5 Nov 2008

5340-15-000-4824
Pipe Hanger

150004824
71422007: RNCC: 3 | RNVC: 2
71422007: RNCC: 5 | RNVC: 2

11 Mar 2013

5340-15-103-8714
Loop Clamp

151038714
10450190: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-008-0766
Angle Bracket

150080766
60114213: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-194-4691
Snap Hook

151944691
09.247.50: RNCC: 3 | RNVC: 2
(241)A492809.247.50: RNCC: 5 | RNVC: 2

18 Nov 2010

5340-15-156-0820
Expansion Shield

151560820
807089: RNCC: 3 | RNVC: 2
(241)S7177807089: RNCC: 5 | RNVC: 2

20 Nov 2002

5340-15-115-5736
Loop Clamp

151155736
4885637: RNCC: 3 | RNVC: 2

5 Dec 1992

5340-15-186-9095
Loop Clamp

151869095
559162: RNCC: 3 | RNVC: 2
559162: RNCC: 5 | RNVC: 9

5 Jan 2009

5340-15-120-0209
Loop Clamp

151200209
12177090: RNCC: 3 | RNVC: 2

5 Dec 1994

5340-15-149-8837
Access Cover

151498837
A.74652/POS.71: RNCC: 3 | RNVC: 2

22 Jul 1999

5340-15-186-8625
Mounting Bracket

151868625
1R342642LC: RNCC: 3 | RNVC: 2

5 Jan 2009

5340-15-008-6185
Loop Clamp

150086185
4595799: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-065-0790
Cushioning Pad

150650790
GA5: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-073-5207
Rim Lock Set

150735207
01490: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-001-7967
Mounting Bracket

150017967
5949790486: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-118-2645
Loop Clamp

151182645
D0485455: RNCC: 3 | RNVC: 2

11 Apr 1995

5340-15-118-1133
Meter Holder

151181133
1R 578563: RNCC: 3 | RNVC: 2
1R 578563: RNCC: 5 | RNVC: 9

22 Mar 1996

5340-15-001-8235
Mounting Bracket

150018235
5949784412: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-065-7716
Butt Hinge Leaf

150657716
W 004622: RNCC: 3 | RNVC: 2

1 Jul 1989

5340-15-073-5241
Rim Lock Set

150735241
18300-008: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-073-5259
Flush Lock

150735259
73-70X48: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-045-3631
Loop Clamp

150453631
758-12-15: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-051-3166
Loop Clamp

150513166
1-04185-05: RNCC: 3 | RNVC: 2
10418505: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-119-3855
Catch Strike

151193855
60170777: RNCC: 3 | RNVC: 2
(241)A424960170777: RNCC: 5 | RNVC: 2

25 Jul 1994

5340-15-187-6662
Caster Wheel

151876662
535427: RNCC: 3 | RNVC: 2

20 Apr 2009

5340-15-120-2717
Butt Hinge Leaf

151202717
60166017: RNCC: 3 | RNVC: 2

9 Mar 1995

5340-15-120-6613
Spring Holder

151206613
D1401543: RNCC: 3 | RNVC: 2

28 Jun 1996

5340-15-119-0719
Loop Clamp

151190719
70926049: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-109-7479
Loop Clamp

151097479
4757349: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-063-4828
Loop Clamp

150634828
60102864: RNCC: 3 | RNVC: 2

15 Jun 1982

5340-15-055-1330
Handle Grip

150551330
9153-043B: RNCC: 3 | RNVC: 2

6 Apr 1972

5340-15-142-7423
Screw Thread Insert

151427423
2156-06-320: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-179-7082
Mounting Plate

151797082
41033753: RNCC: 3 | RNVC: 2
(241)A424941033753: RNCC: 5 | RNVC: 2

7 Jun 2007

5340-15-207-0631
Expansion Shield

152070631
FX000052390: RNCC: 3 | RNVC: 2
(241)AB882FX000052390: RNCC: 5 | RNVC: 2

29 Aug 2012

5340-15-169-9733
Angle Bracket

151699733
F72020341: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-102-1593
Cushioning Pad

151021593
8211.01.17: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-120-4468
Mending Plate

151204468
132511912: RNCC: 3 | RNVC: 2

25 May 1995

5340-15-188-8150
Mounting Bracket

151888150
0127884G01: RNCC: 3 | RNVC: 2
(241)A00690127884G01: RNCC: 5 | RNVC: 2

23 Nov 2009

5340-15-205-2557
Rod End Connector

152052557
504379559: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-144-7928
Metal Grille

151447928
GRG-AP2000: RNCC: 3 | RNVC: 2

24 Jan 1997

5340-15-153-9598
Loop Clamp

151539598
P10/16UNI9209ACC.INOX-ZN: RNCC: 3 | RNVC: 2
230026601: RNCC: 5 | RNVC: 2

12 Mar 2001

5340-15-007-2883
Loop Clamp

150072883
SF260-14-759-01: RNCC: 3 | RNVC: 2
SF260-14-759-01: RNCC: 5 | RNVC: 9

14 Mar 1980

5340-15-108-3258
Mending Plate

151083258
60120281: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-118-2608
Plain Solid Disk

151182608
D1409031: RNCC: 3 | RNVC: 2

10 Apr 1995

5340-15-005-5795
Angle Bracket

150055795
JJ71467: RNCC: 3 | RNVC: 2

3 May 1979

5340-15-194-4656
Snap Hook

151944656
09.247.70: RNCC: 3 | RNVC: 2
(241)A492809.247.70: RNCC: 5 | RNVC: 2

18 Nov 2010

5340-15-204-4621
Mounting Plate

152044621
504138357: RNCC: 3 | RNVC: 2

7 Nov 2011

5340-15-181-0273
Snap Hook

151810273
786VN: RNCC: 3 | RNVC: 2

29 Sep 2008

5340-15-066-0864
Loop Clamp

150660864
305300001201: RNCC: 5 | RNVC: 2
305300001201: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-100-5060
Leather Strap

151005060
000900245100: RNCC: 5 | RNVC: 2
000900245100: RNCC: 5 | RNVC: 9

22 Apr 1987

5340-15-061-4112
Clip Retainer Plate

150614112
P-125393-001: RNCC: 3 | RNVC: 2
P125393-001: RNCC: 5 | RNVC: 2

16 Jan 1978

5340-15-058-7714
Rod End Clevis

150587714
205-3-030-03: RNCC: 3 | RNVC: 2
205-3-030-03: RNCC: 5 | RNVC: 9

17 Apr 1975

5340-15-153-2479
Handle Grip

151532479
B193/20FP-M6: RNCC: 2 | RNVC: 3
122505527: RNCC: 5 | RNVC: 3

12 Dec 2000

5340-15-220-0140
Angle Bracket

152200140
S7101: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-198-5003
Access Cover

151985003
P5MG60002: RNCC: 3 | RNVC: 2
(241)A0930P5MG60002: RNCC: 5 | RNVC: 2

7 Oct 2004

5340-15-119-5681
Angle Bracket

151195681
4852824: RNCC: 3 | RNVC: 2

19 Sep 1994

5340-15-120-3521
Mending Plate

151203521
60175321: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-163-3745
Access Cover

151633745
9435018: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-150-7321
Block Clamp

151507321
52000030: RNCC: 3 | RNVC: 2
(241)A486752000030: RNCC: 5 | RNVC: 2

23 May 2003

5340-15-118-4494
Angle Bracket

151184494
60154194: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-149-3162
Mending Plate

151493162
4886160: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-063-2826
Angle Bracket

150632826
60110080: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-188-0993
Lock Key

151880993
72951984: RNCC: 3 | RNVC: 2
(241)A398072951984: RNCC: 5 | RNVC: 2

8 Jul 2009

5340-15-199-8420
Screw Thread Insert

151998420
999-5000-30-106: RNCC: 3 | RNVC: 2
(241)A0126999-5000-30-106: RNCC: 5 | RNVC: 2

14 Jun 2005

5340-15-204-8363
Retaining Band

152048363
5216/CE: RNCC: 3 | RNVC: 2
(241)AK0625216/CE: RNCC: 5 | RNVC: 2

13 Jan 2012

5340-15-059-3724
Retaining Strap

150593724
1127-40-315: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-063-1009
Loop Clamp

150631009
SF260-13-160-01: RNCC: 3 | RNVC: 2
SF260-13-160-01: RNCC: 5 | RNVC: 9

23 Nov 1982

5340-15-109-6002
Bow Handle

151096002
60126466: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-178-5505
Mounting Plate

151785505
2231.029.0001: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-112-3478
Retaining Strap

151123478
60157883: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-118-3878
Webbing Strap

151183878
60158517: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-119-0109
Tubular Fairlead

151190109
70083987: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-109-4820
Angle Bracket

151094820
1P 532415: RNCC: 3 | RNVC: 2
1P 532415: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-179-7323
Mounting Plate

151797323
504011415: RNCC: 3 | RNVC: 2
(241)A4249504011415: RNCC: 5 | RNVC: 2

7 Jun 2007

5340-15-009-0628
Bow Handle

150090628
4674925: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-001-6787
Handle Grip

150016787
174060006: RNCC: 3 | RNVC: 2
174060006: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-178-7573
Angle Bracket

151787573
037441: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-121-5739
Retaining Strap

151215739
1Q 514235: RNCC: 3 | RNVC: 2
1Q 514235: RNCC: 5 | RNVC: 9

18 Sep 1996

5340-15-156-1504
Mending Plate

151561504
991241065: RNCC: 3 | RNVC: 2
42536454: RNCC: 5 | RNVC: 2

6 Dec 2002

5340-15-178-7533
Mounting Bracket

151787533
047782: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-001-8698
Snap Hook

150018698
411NYN: RNCC: 3 | RNVC: 2
411NYN: RNCC: 5 | RNVC: 2

17 Jul 2013

5340-15-118-4043
Angle Bracket

151184043
60158445: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-100-2539
Butt Hinge Leaf

151002539
2120-01-03R1: RNCC: 3 | RNVC: 2

20 Jan 1987

5340-15-003-4222
Threaded Rod End

150034222
129-B131-05-041: RNCC: 3 | RNVC: 2
(241)A0126129-B131-05-041: RNCC: 5 | RNVC: 2

12 Nov 2013

5340-15-118-8809
Access Cover

151188809
487946008B: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-112-8466
Vent Plug

151128466
467666: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-119-0527
Expansion Plug

151190527
70920213: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-109-1223
Retaining Strap

151091223
60116043: RNCC: 3 | RNVC: 2

30 Apr 1988

5340-15-103-6809
Loop Clamp

151036809
24009493A: RNCC: 3 | RNVC: 2

26 Nov 1987

5340-15-159-9655
Clamping Catch

151599655
122603372: RNCC: 3 | RNVC: 2

19 Apr 2004

5340-15-149-8308
Vent Plug

151498308
112758192: RNCC: 3 | RNVC: 2

26 Oct 1999

5340-15-151-2276
Angle Bracket

151512276
60184951: RNCC: 3 | RNVC: 2

2 May 2000

5340-15-204-3331
Butt Hinge

152043331
0000500429917: RNCC: 3 | RNVC: 2
(241)A39630000500429917: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-207-8736
Mounting Bracket

152078736
5801359914: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-073-8918
Flush Lock

150738918
13B65X55-3LEVE: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-067-5375
Angle Bracket

150675375
504893: RNCC: 2 | RNVC: 2
504893: RNCC: 5 | RNVC: 9

11 Feb 1986

5340-15-003-9116
Mounting Plate

150039116
182741319: RNCC: 3 | RNVC: 2
(241)A0199182741319: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-154-2049
Angle Bracket

151542049
0-168655: RNCC: 3 | RNVC: 2
(241)A39630-168655: RNCC: 5 | RNVC: 2
1PA39630-168655: RNCC: 5 | RNVC: 2

28 Mar 2001

5340-15-152-3530
Angle Bracket

151523530
0-171318: RNCC: 3 | RNVC: 2
00171318: RNCC: 3 | RNVC: 2
(241)A39630-171318: RNCC: 5 | RNVC: 2
1PA39630-171318: RNCC: 5 | RNVC: 2

4 Sep 2000

5340-15-003-9118
Sliding Block

150039118
182741322: RNCC: 3 | RNVC: 2
(241)A0199182741322: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-109-4864
Angle Bracket

151094864
1Q 581411: RNCC: 3 | RNVC: 2
1Q 581411: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-153-2570
Handle Grip

151532570
122606291: RNCC: 2 | RNVC: 3

12 Dec 2000

5340-15-178-9252
Mounting Plate

151789252
FP106MD118AA00: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-15-189-3826
Mounting Bracket

151893826
79080914: RNCC: 3 | RNVC: 2

18 Feb 2010

5340-15-187-1984
Mounting Bracket

151871984
SC 100 611: RNCC: 3 | RNVC: 2
(241)A3980SC100611: RNCC: 5 | RNVC: 2

24 Feb 2009

5340-15-053-3412
Rim Lock Set

150533412
1971TAV019MSENSP: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-120-2734
Angle Bracket

151202734
60166481: RNCC: 3 | RNVC: 2

9 Mar 1995

5340-15-063-2830
Retaining Strap

150632830
60110272: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-207-8612
Mounting Bracket

152078612
5801319791: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-163-3800
Bridge Clamp

151633800
9447326: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-102-1196
Retaining Band

151021196
V44/1-03-211: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-198-9106
Screw Thread Insert

151989106
26HJ04103051S01-059/N: RNCC: 3 | RNVC: 2

25 Nov 2004

5340-15-154-0932
Angle Bracket

151540932
0-150393: RNCC: 3 | RNVC: 2
00150393: RNCC: 3 | RNVC: 2
(241)A39630-150393: RNCC: 5 | RNVC: 2
1PA39630-150393: RNCC: 5 | RNVC: 2

20 Mar 2001

5340-15-170-1628
Spring Holder

151701628
2856-005: RNCC: 3 | RNVC: 2

12 Nov 2002

5340-15-127-4913
Angle Bracket

151274913
859660: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-105-8390
Retaining Band

151058390
22939: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-148-3487
Angle Bracket

151483487
101940: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-063-7837
Spring Tension Clip

150637837
11580034: RNCC: 3 | RNVC: 2
77901326: RNCC: 5 | RNVC: 2

31 Mar 1982

5340-15-119-5591
Angle Bracket

151195591
4881571: RNCC: 3 | RNVC: 2

19 Sep 1994

5340-15-195-8935
Mounting Bracket

151958935
A9063530345: RNCC: 3 | RNVC: 2
(241)AJ611A9063530345: RNCC: 5 | RNVC: 2

23 May 2011

5340-15-002-3111
Mounting Bracket

150023111
504376965: RNCC: 3 | RNVC: 2

6 Aug 2013

5340-15-118-3842
Loop Clamp

151183842
60160740: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-108-7053
Loop Clamp

151087053
10441890: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-180-4944
Mounting Bracket

151804944
D9100008P: RNCC: 3 | RNVC: 2

3 Jun 2008

5340-15-112-2562
Bow Handle

151122562
277A1630-001: RNCC: 3 | RNVC: 2

9 Mar 1991

5340-15-104-4369
Expansion Plug

151044369
10158700: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-168-9710
Door Closer

151689710
F72003574: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-008-0829
Retaining Strap

150080829
60113887: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-177-3705
Mechanical Stop

151773705
022922: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-178-0882
Angle Bracket

151780882
53B054P003: RNCC: 3 | RNVC: 2

14 Feb 2005

5340-15-112-8623
Vent Plug

151128623
471682: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-152-0016
Angle Bracket

151520016
60133396: RNCC: 3 | RNVC: 2

31 Jul 2000

5340-15-118-9172
Mending Plate

151189172
73145369: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-186-9920
Handwheel

151869920
509685: RNCC: 3 | RNVC: 2
(241)A1686509685: RNCC: 5 | RNVC: 2
509685: RNCC: 5 | RNVC: 2
509685: RNCC: 5 | RNVC: 2
509685: RNCC: 5 | RNVC: 2

19 Jan 2009

5340-15-148-3485
Angle Bracket

151483485
102526: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-129-4203
Handle Grip

151294203
E3200D292: RNCC: 3 | RNVC: 2
E3200D292: RNCC: 5 | RNVC: 9

9 Oct 1996

5340-15-062-3215
Plain Solid Disk

150623215
303308: RNCC: 3 | RNVC: 2

3 May 1980

5340-15-207-4093
Angle Bracket Set

152074093
5801331832: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-15-198-7907
Catch Strike

151987907
60188160: RNCC: 3 | RNVC: 2

17 Nov 2004

5340-15-100-3242
Retaining Strap

151003242
000204440200: RNCC: 5 | RNVC: 2
000204440200: RNCC: 5 | RNVC: 9

17 Sep 1986

5340-15-112-3485
Retaining Strap

151123485
4837087: RNCC: 3 | RNVC: 2
(7001)5340151123485: RNCC: 5 | RNVC: 2

7 Oct 1989

5340-15-104-4380
Expansion Plug

151044380
22456: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-108-0808
Lock-Release Lever

151080808
32-03-035: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-111-7905
Loop Clamp

151117905
60145447: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-007-1855
Rod End Connector

150071855
1390731: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-199-5395
Butt Hinge

151995395
ART.8131: RNCC: 3 | RNVC: 2

17 Apr 2005

5340-15-118-9474
Loop Clamp

151189474
75204131: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-195-3520
Mounting Bracket

151953520
04NX0732FI001: RNCC: 3 | RNVC: 2
(241)A846004NX0732FI001: RNCC: 5 | RNVC: 2

16 Mar 2011

5340-15-151-2803
Mending Plate

151512803
541042400: RNCC: 3 | RNVC: 2
554104240000: RNCC: 5 | RNVC: 2

8 Jun 2000

5340-15-153-4964
Access Cover

151534964
6512250.11: RNCC: 3 | RNVC: 2

2 Feb 2001

5340-15-106-7618
Trigger Guard

151067618
980814: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-101-0246
Leather Strap

151010246
888200131: RNCC: 3 | RNVC: 2

22 Apr 1987

5340-15-118-3620
Angle Bracket

151183620
60141067: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-003-9073
Mounting Plate

150039073
182741039: RNCC: 3 | RNVC: 2
(241)A0199182741039: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-118-8358
Mounting Bracket

151188358
9449611: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-202-8822
Access Cover

152028822
A6122-94005-113: RNCC: 3 | RNVC: 2
(241)A0126A6122-94005-113: RNCC: 5 | RNVC: 2

13 Sep 2007

5340-15-198-4258
Access Cover

151984258
122516020: RNCC: 3 | RNVC: 2

27 Sep 2004

5340-15-144-9999
Mounting Plate

151449999
E5238.0000: RNCC: 5 | RNVC: 2
E5238.0000: RNCC: 5 | RNVC: 9

26 Feb 1997

5340-15-108-6304
Plug Button

151086304
93913830: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-101-6705
Retaining Strap

151016705
0130200: RNCC: 3 | RNVC: 2

27 Oct 1986

5340-15-067-9302
Angle Bracket

150679302
23165-101: RNCC: 3 | RNVC: 2

3 Mar 1986

5340-15-102-4480
Mount Pintle

151024480
263A1517-001: RNCC: 3 | RNVC: 2

30 Aug 1988

5340-15-062-5355
Retaining Strap

150625355
168211 D: RNCC: 3 | RNVC: 2

1 May 1977

5340-15-118-2019
Loop Clamp

151182019
17315090: RNCC: 3 | RNVC: 2
(241)A424917315090: RNCC: 5 | RNVC: 2

22 Apr 1994

5340-15-204-3408
Loop Clamp

152043408
0120RE49444: RNCC: 3 | RNVC: 2
(241)ACA640120RE49444: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-009-1207
Retaining Strap

150091207
125769-3: RNCC: 3 | RNVC: 2

10 Apr 1980

5340-15-001-8258
Mounting Bracket

150018258
5949788839: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-004-0545
Butt Hinge Leaf

150040545
1137-10-143: RNCC: 3 | RNVC: 2
113710143: RNCC: 3 | RNVC: 2

30 May 1977

5340-15-206-3536
Mounting Plate

152063536
50040 2773: RNCC: 3 | RNVC: 2

4 Jun 2012

5340-15-117-1949
Angle Bracket

151171949
190512207: RNCC: 3 | RNVC: 2

2 Sep 1993

5340-15-120-0295
Loop Clamp

151200295
105.3086: RNCC: 3 | RNVC: 2

6 Dec 1994

5340-15-119-6423
Loop Clamp

151196423
60201: RNCC: 3 | RNVC: 2
93191503: RNCC: 5 | RNVC: 2
60201: RNCC: 5 | RNVC: 9

10 Oct 1994

5340-15-118-9533
Mounting Bracket

151189533
75204510: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-111-4195
Angle Bracket

151114195
329162P1: RNCC: 3 | RNVC: 2
329162P1: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-179-6873
Mounting Plate

151796873
00164550: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-147-4160
Mending Plate

151474160
3210004800: RNCC: 3 | RNVC: 2

18 Nov 1997

5340-15-100-8026
Angle Bracket

151008026
000900264600: RNCC: 5 | RNVC: 2
000900264600: RNCC: 5 | RNVC: 9

20 Nov 1986

5340-15-009-2552
Clip Retainer Plate

150092552
P-941020-001: RNCC: 3 | RNVC: 2
P941020-001: RNCC: 5 | RNVC: 2

23 Aug 1980

5340-15-054-9043
Access Door Hinge

150549043
205-1-164-03: RNCC: 3 | RNVC: 2
205-1-164-03: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-001-7293
Retaining Band

150017293
111-05000: RNCC: 3 | RNVC: 2

15 Jul 2013

5340-15-151-2776
Mending Plate

151512776
541-02-2460: RNCC: 2 | RNVC: 3
541022460: RNCC: 3 | RNVC: 2
554102246000: RNCC: 5 | RNVC: 2

8 Jun 2000

5340-15-179-3503
T Bracket

151793503
41201342: RNCC: 3 | RNVC: 2

28 Nov 2006

5340-15-195-8515
Mounting Bracket

151958515
A0029918570: RNCC: 3 | RNVC: 2
(241)AJ611A0029918570: RNCC: 5 | RNVC: 2

23 May 2011

5340-15-179-8963
Mounting Bracket

151798963
D1408556: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-205-4653
Rod End Clevis

152054653
42540977: RNCC: 3 | RNVC: 2
(241)A424942540977: RNCC: 5 | RNVC: 2

12 Mar 2012

5340-15-152-7979
Mounting Bracket

151527979
P200507: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-181-1731
Loop Clamp

151811731
165040108: RNCC: 3 | RNVC: 2
(241)A0199165040108: RNCC: 5 | RNVC: 2

5 Nov 2008

5340-15-002-1400
Mounting Bracket

150021400
5801403124: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-115-5744
Mending Plate

151155744
4885469: RNCC: 3 | RNVC: 2

5 Dec 1992

5340-15-116-4903
Bow Handle

151164903
60166065: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-156-2813
Door Handle

151562813
4786978: RNCC: 3 | RNVC: 2
4786978: RNCC: 3 | RNVC: 2
00110315: RNCC: 4 | RNVC: 1
(241)A396300110315: RNCC: 5 | RNVC: 2
1PA396300110315: RNCC: 5 | RNVC: 2
4786978: RNCC: 5 | RNVC: 2
4786978: RNCC: 5 | RNVC: 9

13 Jan 2003

5340-15-188-4318
Catch Strike

151884318
79102428: RNCC: 3 | RNVC: 2

11 Sep 2009

5340-15-118-1150
Spring Holder

151181150
1P 272790: RNCC: 3 | RNVC: 2
1P 272790: RNCC: 5 | RNVC: 9

22 Mar 1996

5340-15-154-1769
Retaining Band

151541769
130335: RNCC: 3 | RNVC: 2

27 Mar 2001

5340-15-177-3750
Mounting Plate

151773750
026940: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-177-3723
Access Cover

151773723
024930: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-120-3455
Catch Strike

151203455
60174387: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-148-6415
Mending Plate

151486415
02-633 SS-SF: RNCC: 3 | RNVC: 2
190512252: RNCC: 5 | RNVC: 2

17 Sep 1998

5340-15-170-0339
Angle Bracket

151700339
F72020915: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-113-2368
Handle Grip

151132368
224A6029-005: RNCC: 3 | RNVC: 2

10 Apr 1991

5340-15-121-2687
Metal Grille

151212687
8500626225: RNCC: 3 | RNVC: 2

7 Nov 1995

5340-15-063-2806
Angle Bracket

150632806
60108576: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-151-8669
Angle Bracket

151518669
60120634: RNCC: 3 | RNVC: 2

14 Jul 2000

5340-15-162-4041
Spring Tension Clip

151624041
1460.023: RNCC: 3 | RNVC: 2

16 Aug 2001

5340-15-001-8412
Bow Handle

150018412
5949789624: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-009-4497
Bail Handle

150094497
146A2A26: RNCC: 5 | RNVC: 2
146A2A26: RNCC: 5 | RNVC: 9

19 Jun 1980

5340-15-178-6096
Threaded Rod End

151786096
SF260-13-142-17: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-005-1091
Handle Grip

150051091
1137-07-151: RNCC: 3 | RNVC: 2

10 Apr 1978

5340-15-177-3423
Retaining Strap

151773423
99433106: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-231-1499
Angle Bracket

152311499
4446477: RNCC: 3 | RNVC: 2
254015E088579: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-050-4606
Webbing Strap

150504606
04-072-044X1: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-059-3533
Retaining Strap

150593533
1127-32-259: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-155-5251
Caster Wheel

151555251
(241)A5015040.00.051: RNCC: 3 | RNVC: 2
040.00.051: RNCC: 3 | RNVC: 2

8 Apr 2002

5340-15-186-7804
Runner

151867804
76045158: RNCC: 3 | RNVC: 2

5 Jan 2009

5340-15-008-6181
Handle Grip

150086181
1389098: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-203-8473
Retaining Band

152038473
FASCE0039: RNCC: 3 | RNVC: 2
(241)A4114FASCE0039: RNCC: 5 | RNVC: 2

7 Jul 2011

5340-15-161-0627
Angle Bracket

151610627
F720048531: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-119-1804
Access Cover

151191804
75214595: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-002-8149
Mounting Plate

150028149
5801359992: RNCC: 3 | RNVC: 2

3 Oct 2013

5340-15-063-9779
Loop Clamp

150639779
3908.0457-0: RNCC: 3 | RNVC: 2

7 Sep 1983

5340-15-156-3061
Protection Bellows

151563061
122611163: RNCC: 2 | RNVC: 3

17 Jan 2003

5340-15-164-1470
Angle Bracket

151641470
4793596: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-155-6565
Protection Bellows

151556565
0550140: RNCC: 3 | RNVC: 2
(241)A97720550140: RNCC: 8 | RNVC: 2

14 May 2002

5340-15-197-8668
Angle Bracket

151978668
N523G5290201: RNCC: 3 | RNVC: 2

21 May 2004

5340-15-120-3435
Spring Tension Clip

151203435
17722176: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-193-1790
Retaining Band

151931790
032039: RNCC: 3 | RNVC: 2
(241)A4216032039: RNCC: 5 | RNVC: 2

20 Apr 2010

5340-15-120-3463
Retaining Strap

151203463
60175579: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-207-8879
Access Cover

152078879
9441098: RNCC: 3 | RNVC: 2

21 Nov 2012

5340-15-150-6025
Mending Plate

151506025
107594: RNCC: 3 | RNVC: 2

6 Dec 1999

5340-15-058-7559
Hand Crank

150587559
TM3-0224-033-00: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-055-4464
Rod End Clevis

150554464
6-3149-401-39422: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-150-6367
Expansion Plug

151506367
230823314: RNCC: 3 | RNVC: 2

15 Dec 1999

5340-15-105-8399
Retaining Band

151058399
14596587: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-119-7146
Angle Bracket

151197146
60173238: RNCC: 3 | RNVC: 2

8 Nov 1994

5340-15-118-4421
Angle Bracket

151184421
60154200: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-202-8111
Hook Handle

152028111
SE9S627435: RNCC: 3 | RNVC: 2
(241)A4519SE9S627435: RNCC: 5 | RNVC: 2

16 Jul 2007

5340-15-152-0171
Angle Bracket

151520171
0-162957: RNCC: 3 | RNVC: 2

2 Aug 2000

5340-15-073-5226
Rim Lock

150735226
39A75X30: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-188-7977
Loop Clamp

151887977
17315390: RNCC: 3 | RNVC: 2
(241)A424917315390: RNCC: 5 | RNVC: 2

18 Nov 2009

5340-15-002-5971
Mounting Bracket

150025971
504379025: RNCC: 3 | RNVC: 2

4 Sep 2013

5340-15-006-3689
Mounting Bracket

150063689
22224: RNCC: 3 | RNVC: 2

13 Dec 2013

5340-15-154-2282
Angle Bracket

151542282
99935568: RNCC: 3 | RNVC: 2

28 Mar 2001

5340-15-003-1921
Angle Bracket

150031921
742996: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-120-2189
Angle Bracket

151202189
60155069: RNCC: 3 | RNVC: 2

27 Feb 1995

5340-15-063-3263
Retaining Strap

150633263
60114277: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-187-4697
Cushioning Pad

151874697
3002528: RNCC: 3 | RNVC: 2

2 Apr 2009

5340-15-179-7350
Loop Clamp

151797350
504000058: RNCC: 3 | RNVC: 2
(241)A4249504000058: RNCC: 5 | RNVC: 2

7 Jun 2007

5340-15-004-5114
Angle Bracket

150045114
2ST98165-5: RNCC: 3 | RNVC: 2

24 Feb 1978

5340-15-121-7023
Mounting Bracket

151217023
73154652: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-203-7203
Loop Clamp

152037203
00375R0120: RNCC: 3 | RNVC: 2
00375R0120: RNCC: 5 | RNVC: 2
CV173784: RNCC: 5 | RNVC: 2

27 Jun 2011

5340-15-109-5066
Expansion Plug

151095066
14329401: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-060-6374
Retaining Strap

150606374
62658-101A1: RNCC: 3 | RNVC: 2

29 Jun 1977

5340-15-111-5913
Screw Thread Insert

151115913
A05529-01-20: RNCC: 3 | RNVC: 2
A05529-01-20: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-108-5204
Retaining Strap

151085204
60121348: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-160-5859
Coat And Hat Hook

151605859
F720133101: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-188-5139
Case Corner

151885139
391: RNCC: 3 | RNVC: 2

29 Sep 2009

5340-15-177-3843
Bridge Clamp

151773843
034070: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-149-8839
Access Cover

151498839
A.74652/POS.27: RNCC: 3 | RNVC: 2

22 Jul 1999

5340-15-207-8633
Mounting Bracket

152078633
5801343179: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-063-8075
Loop Clamp

150638075
4982514: RNCC: 3 | RNVC: 2
4982514: RNCC: 5 | RNVC: 2

31 Mar 1982

5340-15-163-3750
Loop Clamp

151633750
9435322: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-001-7933
Mounting Bracket

150017933
500425686: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-179-0002
T Bracket

151790002
RS 411 779 A: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-187-3095
Retaining Band

151873095
UZ155: RNCC: 3 | RNVC: 2
(241)A9410UZ155: RNCC: 5 | RNVC: 2

11 Mar 2009

5340-15-179-6420
Mending Plate

151796420
98153401: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-120-2952
Angle Bracket

151202952
4853971: RNCC: 3 | RNVC: 2

13 Mar 1995

5340-15-151-8695
Mending Plate

151518695
60118051: RNCC: 3 | RNVC: 2

14 Jul 2000

5340-15-063-0797
Loop Clamp

150630797
4723136: RNCC: 3 | RNVC: 2

15 Jun 1982

5340-15-201-7712
Stand Base

152017712
190509461: RNCC: 3 | RNVC: 2

12 Dec 2006

5340-15-002-2765
Mounting Bracket

150022765
504374798: RNCC: 3 | RNVC: 2

2 Aug 2013

5340-15-001-0297
Mounting Bracket

150010297
504378264: RNCC: 3 | RNVC: 2

15 May 2013

5340-15-059-4604
Screw Thread Insert

150594604
10-08-66-00: RNCC: 3 | RNVC: 2

10 Apr 1975

5340-15-002-6578
Mounting Bracket

150026578
62564005: RNCC: 3 | RNVC: 2

17 Sep 2013

5340-15-118-7186
Mounting Bracket

151187186
73131709: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-153-2547
Stand Base

151532547
122605401: RNCC: 2 | RNVC: 3

12 Dec 2000

5340-15-116-4901
Bow Handle

151164901
60149896: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-156-1507
Mending Plate

151561507
991241063: RNCC: 3 | RNVC: 2
42536457: RNCC: 5 | RNVC: 2

6 Dec 2002

5340-15-100-5039
Shimmy Damper

151005039
100900321600: RNCC: 5 | RNVC: 2
100900321600: RNCC: 5 | RNVC: 9

22 Apr 1987

5340-15-068-4508
Angle Bracket

150684508
02-10-242-11-8: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-151-6791
Strap Hinge

151516791
4631569: RNCC: 3 | RNVC: 2

27 Jun 2000

5340-15-153-6877
Loop Clamp

151536877
142068029: RNCC: 3 | RNVC: 2

20 Feb 2001

5340-15-195-1088
Mounting Bracket

151951088
03.04.000011: RNCC: 3 | RNVC: 2
(241)AE59103.04.000011: RNCC: 5 | RNVC: 2

2 Mar 2011

5340-15-073-5209
Rim Lock Set

150735209
P288: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-202-8610
Mounting Bracket

152028610
BK.30206: RNCC: 3 | RNVC: 2
(241)A0544BK.30206: RNCC: 5 | RNVC: 2

26 Aug 2007

5340-15-116-8439
Loop Clamp

151168439
D1402741: RNCC: 3 | RNVC: 2

24 Jan 1994

5340-15-107-0768
Plain Solid Disk

151070768
I49-04: RNCC: 3 | RNVC: 2
0730462: RNCC: 5 | RNVC: 2

20 Sep 1991

5340-15-001-7840
Mounting Bracket

150017840
5949778746: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-202-3600
Loop Clamp

152023600
18089094: RNCC: 3 | RNVC: 2
(241)A424918089094: RNCC: 5 | RNVC: 2

28 Feb 2007

5340-15-150-8592
Mounting Bracket

151508592
00087667: RNCC: 3 | RNVC: 2

1 Feb 2000

5340-15-001-7924
Loop Clamp

150017924
41231100: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-061-1173
Angle Bracket

150611173
72-042-410: RNCC: 3 | RNVC: 2
72-042-410: RNCC: 5 | RNVC: 9

16 Apr 1978

5340-15-152-3244
Angle Bracket

151523244
0-107777: RNCC: 3 | RNVC: 2
(241)A39630-107777: RNCC: 5 | RNVC: 2
1PA39630-107777: RNCC: 5 | RNVC: 2

31 Aug 2000

5340-15-007-0701
Angle Bracket

150070701
1026-02-139: RNCC: 3 | RNVC: 2

29 Jul 1977

5340-15-179-7057
Angle Bracket

151797057
0000500411577: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-105-4415
Handle Grip

151054415
4026466: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-119-2475
Handle Grip

151192475
P390/30N-10: RNCC: 3 | RNVC: 2

2 May 1995

5340-15-212-0373
Angle Bracket

152120373
MENSOLA: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-179-9924
Friction Catch

151799924
9000462: RNCC: 3 | RNVC: 2

16 Nov 2007

5340-15-199-4713
Expansion Plug

151994713
D0180009A: RNCC: 3 | RNVC: 2
738971645U01: RNCC: 5 | RNVC: 2

13 Apr 2005

5340-15-051-3255
Retaining Strap

150513255
4515657: RNCC: 3 | RNVC: 2
4515657: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-063-3164
Angle Bracket

150633164
60114983: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-116-4908
Retaining Strap

151164908
60165543: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-188-7106
Mounting Bracket

151887106
BK.30107: RNCC: 3 | RNVC: 2
(241)A0544BK.30107: RNCC: 5 | RNVC: 2

29 Oct 2009

5340-15-202-8458
Mounting Bracket

152028458
9.3040.0393.A: RNCC: 3 | RNVC: 2
(241)A92169.3040.0393.A: RNCC: 5 | RNVC: 2

23 Jul 2007

5340-15-113-3686
Loop Clamp

151133686
LE-X-PP-N3-20: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-089-5821
Butt Hinge

150895821
16940-125: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-002-1414
Access Cover

150021414
5801376814: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-004-2595
Retaining Strap

150042595
1378682: RNCC: 3 | RNVC: 2
1378682: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-062-3250
Mending Plate

150623250
1141-34-012: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-003-9067
Mounting Plate

150039067
182741024: RNCC: 3 | RNVC: 2
(241)A0199182741024: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-100-3290
Retaining Strap

151003290
8269857: RNCC: 3 | RNVC: 2

27 Oct 1985

5340-15-007-2559
Angle Bracket

150072559
1383619: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-103-0926
Armature Support

151030926
DE013.13.395: RNCC: 3 | RNVC: 2
(241)A5015DE013.13.395: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-179-9573
Mounting Plate

151799573
0000500403048: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-117-9604
Mending Plate

151179604
203337: RNCC: 3 | RNVC: 2
203337: RNCC: 5 | RNVC: 9

20 Oct 1994

5340-15-116-2684
Retaining Strap

151162684
190521240: RNCC: 3 | RNVC: 2

15 Apr 1993

5340-15-149-8662
Lever Bracket

151498662
191TL2006-1: RNCC: 5 | RNVC: 2
191TL2006-1: RNCC: 5 | RNVC: 9

16 Jun 1999

5340-15-126-5950
Handle Grip

151265950
120240: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-063-7355
Retaining Strap

150637355
23.43.91.00: RNCC: 3 | RNVC: 2

9 Jun 1983

5340-15-118-8392
Mounting Bracket

151188392
9455301: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-063-3738
Bow Handle

150633738
60112513: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-003-1437
Lock Bolt

150031437
5949791453: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-102-0299
Mending Plate

151020299
0709U01: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-178-4828
Access Cover

151784828
99471017: RNCC: 3 | RNVC: 2
A462000-000: RNCC: 5 | RNVC: 2

1 Jul 2005

5340-15-118-2013
Loop Clamp

151182013
17316790: RNCC: 3 | RNVC: 2

22 Apr 1994

5340-15-007-4992
Mending Plate

150074992
1139-03-115: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-203-6499
Mounting Plate

152036499
CARP33348: RNCC: 3 | RNVC: 2

24 Jun 2011

5340-15-116-8960
Plain Solid Disk

151168960
DPR 24066/1-7: RNCC: 3 | RNVC: 2

18 Nov 1993

5340-15-136-9123
Handle Grip

151369123
MS26519-1: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-198-4262
Access Cover

151984262
122650311: RNCC: 3 | RNVC: 2

27 Sep 2004

5340-15-198-4261
Access Cover

151984261
122611043: RNCC: 3 | RNVC: 2

27 Sep 2004

5340-15-107-2450
Spring Tension Clip

151072450
3070-113: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-107-6603
Access Cover

151076603
X521873: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-109-1233
Mending Plate

151091233
60116462: RNCC: 3 | RNVC: 2

30 Apr 1988

5340-15-188-3810
Door Handle

151883810
A20489: RNCC: 3 | RNVC: 2

3 Sep 2009

5340-15-178-7836
Mounting Plate

151787836
040375: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-054-0781
Angle Bracket

150540781
260-11-77-13: RNCC: 3 | RNVC: 2
260-11-77-13: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-008-0752
Angle Bracket

150080752
60114218: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-109-6179
Access Cover

151096179
DOZ026821: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-154-2265
Angle Bracket

151542265
60191532: RNCC: 3 | RNVC: 2

28 Mar 2001

5340-15-203-8474
Retaining Band

152038474
FASCE0051: RNCC: 3 | RNVC: 2
(241)A4114FASCE0051: RNCC: 5 | RNVC: 2

7 Jul 2011

5340-15-156-5216
Rod End Clevis

151565216
53000025: RNCC: 3 | RNVC: 2

21 Feb 2003

5340-15-153-9470
Angle Bracket

151539470
142062158: RNCC: 2 | RNVC: 3

12 Mar 2001

5340-15-151-8678
Retaining Strap

151518678
60120638: RNCC: 3 | RNVC: 2

14 Jul 2000

5340-15-195-3116
Bow Handle

151953116
OMP 55315902: RNCC: 3 | RNVC: 2
(241)AE591OMP55315902: RNCC: 5 | RNVC: 2

15 Mar 2011

5340-15-145-2551
Access Cover

151452551
541-16-0160: RNCC: 3 | RNVC: 2

4 Jun 1998

5340-15-153-3949
Plain Solid Disk

151533949
5137-351-07: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-133-0941
Angle Bracket

151330941
4697238: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-120-0860
Angle Bracket

151200860
60164959: RNCC: 3 | RNVC: 2

19 Dec 1994

5340-15-156-1528
Angle Bracket

151561528
60197033: RNCC: 3 | RNVC: 2

6 Dec 2002

5340-15-063-3166
Angle Bracket

150633166
60116025: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-118-4007
Angle Bracket

151184007
60160581: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-064-8132
Expansion Plug

150648132
75440011: RNCC: 3 | RNVC: 2
9989176: RNCC: 5 | RNVC: 2
75440011: RNCC: 5 | RNVC: 9

6 May 1983

5340-15-101-4229
Plain Solid Disk

151014229
1576-06-403: RNCC: 3 | RNVC: 2
157606403: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-111-9295
Bow Handle

151119295
4760606: RNCC: 3 | RNVC: 2

10 Sep 1989

5340-15-113-0123
Angle Bracket

151130123
36707640000: RNCC: 3 | RNVC: 2
8194674: RNCC: 5 | RNVC: 2

23 Feb 1989

5340-15-045-3877
Loop Clamp

150453877
751-12-97: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-007-5004
Lock-Release Lever

150075004
1139-02-109: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-061-2548
Mending Plate

150612548
27173-101: RNCC: 3 | RNVC: 2
27173-101: RNCC: 5 | RNVC: 2

2 Sep 1977

5340-15-107-1043
Lock-Release Lever

151071043
301-01-1190: RNCC: 3 | RNVC: 2

14 Apr 1987

5340-15-150-6993
Angle Bracket

151506993
109-0301-28-103: RNCC: 3 | RNVC: 2

20 Dec 1999

5340-15-195-8669
Mounting Bracket

151958669
9063233685: RNCC: 3 | RNVC: 2
(241)AJ6119063233685: RNCC: 5 | RNVC: 2

23 May 2011

5340-15-000-4616
Mounting Bracket

150004616
521: RNCC: 3 | RNVC: 2

5 Mar 2013

5340-15-003-3827
Access Cover

150033827
A153934-2: RNCC: 3 | RNVC: 2

5 Nov 2013

5340-15-179-7197
Mounting Bracket

151797197
00184217: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-118-2612
Rod End Clevis

151182612
D1408278: RNCC: 3 | RNVC: 2

11 Apr 1995

5340-15-120-3530
Loop Clamp

151203530
17314990: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-110-8017
Threaded Rod End

151108017
263A1545-403: RNCC: 3 | RNVC: 2

14 Jun 1990

5340-15-120-2647
Expansion Plug

151202647
16991270: RNCC: 3 | RNVC: 2

9 Mar 1995

5340-15-106-7550
Angle Bracket

151067550
42016927: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-059-9602
Rod End Connector

150599602
92777-101: RNCC: 3 | RNVC: 2

23 Nov 1976

5340-15-155-0434
Angle Bracket

151550434
J92440239-001: RNCC: 3 | RNVC: 2
J29440239-001: RNCC: 3 | RNVC: 2

9 Jan 2002

5340-15-156-9349
Lever Bracket

151569349
505031212: RNCC: 3 | RNVC: 2
1PA424942535619: RNCC: 5 | RNVC: 2
42535619: RNCC: 5 | RNVC: 2
505031212: RNCC: 5 | RNVC: 2
505031212: RNCC: 5 | RNVC: 9

13 Mar 2003

5340-15-007-1879
Retaining Strap

150071879
1372927: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-162-2487
Access Cover

151622487
123847: RNCC: 3 | RNVC: 2
N150294: RNCC: 5 | RNVC: 2

17 May 2001

5340-15-061-5521
Mending Plate

150615521
000200122600: RNCC: 5 | RNVC: 2
000200122600: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-128-4017
Handle Grip

151284017
SC464: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-119-1798
Retaining Strap

151191798
75214492: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-150-1163
Access Cover

151501163
7800014: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-109-5958
Bow Handle

151095958
60105320: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-009-1990
Webbing Strap

150091990
751960: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-109-0836
Angle Bracket

151090836
60134481: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-120-2511
Clamping Catch

151202511
60159180: RNCC: 3 | RNVC: 2

6 Mar 1995

5340-15-051-3159
Expansion Plug

150513159
1-01588-00: RNCC: 3 | RNVC: 2
10158800: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-007-2398
Retaining Strap

150072398
1398418: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-120-3465
Retaining Strap

151203465
60177295: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-107-5077
Retaining Band

151075077
8588659: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-197-5534
Retaining Band

151975534
PN UAS 00047627: RNCC: 3 | RNVC: 2
4730F76037684: RNCC: 5 | RNVC: 9

8 Apr 2004

5340-15-115-3581
Retaining Strap

151153581
538C21-11: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-157-8978
Mending Plate

151578978
008189860: RNCC: 3 | RNVC: 2
0-114216: RNCC: 4 | RNVC: 1
(241)A39630-114216: RNCC: 5 | RNVC: 2
1PA39630-114216: RNCC: 5 | RNVC: 2

20 Nov 2003

5340-15-152-3275
Angle Bracket

151523275
0-168661: RNCC: 3 | RNVC: 2
(241)A39630-168661: RNCC: 5 | RNVC: 2
1PA39630-168661: RNCC: 5 | RNVC: 2

31 Aug 2000

5340-15-003-2075
Angle Bracket

150032075
747354: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-064-5911
Retaining Strap

150645911
4758907: RNCC: 3 | RNVC: 2

17 Nov 1983

5340-15-053-3440
Rod End Clevis

150533440
5-16163-101-72897: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-202-7772
Door Handle

152027772
A.2016-P1: RNCC: 3 | RNVC: 2
(241)A7904A.2016-P1: RNCC: 5 | RNVC: 2

10 Jul 2007

5340-15-007-0653
Screw Thread Insert

150070653
1137-19-149: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-118-7014
Angle Bracket

151187014
73128784: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-148-4034
Loop Clamp

151484034
585600549677: RNCC: 3 | RNVC: 2

10 Aug 1998

5340-15-206-2861
Access Cover

152062861
ED0092201020-S: RNCC: 3 | RNVC: 2

1 Jun 2012

5340-15-105-8483
Bow Handle

151058483
4544139: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-114-9815
Armature Support

151149815
5409041: RNCC: 3 | RNVC: 2
5409041: RNCC: 5 | RNVC: 9

28 May 1993

5340-15-113-8621
Mending Plate

151138621
1P 578412: RNCC: 3 | RNVC: 2
1P 578412: RNCC: 5 | RNVC: 9

13 Jun 1994

5340-15-204-7305
Mounting Plate

152047305
M0004055: RNCC: 3 | RNVC: 2
(241)A0810M0004055: RNCC: 5 | RNVC: 2

19 Dec 2011

5340-15-120-0894
Retaining Strap

151200894
60175577: RNCC: 3 | RNVC: 2

19 Dec 1994

5340-15-202-3687
Retaining Band

152023687
RE49444: RNCC: 3 | RNVC: 2

5 Mar 2007

5340-15-186-9038
Loop Clamp

151869038
132344: RNCC: 3 | RNVC: 2
0028332: RNCC: 5 | RNVC: 2

5 Jan 2009

5340-15-150-6463
Mounting Bracket

151506463
1930965: RNCC: 3 | RNVC: 2

20 Dec 1999

5340-15-207-8589
Mounting Bracket

152078589
5801332538: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-188-3483
Retaining Strap

151883483
30052228: RNCC: 3 | RNVC: 2
Z04.02.03.01: RNCC: 5 | RNVC: 2
Z04.01.01.23: RNCC: 5 | RNVC: 2
5340PL0956089: RNCC: 6 | RNVC: 9

3 Sep 2009

5340-15-160-8457
Coat And Hat Hook

151608457
F720158141: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-199-4714
Expansion Plug

151994714
D0180021A: RNCC: 3 | RNVC: 2
738973075U01: RNCC: 5 | RNVC: 2

13 Apr 2005

5340-15-055-2788
Handle Grip

150552788
6169-9: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-062-4101
Angle Bracket

150624101
012183 H: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-002-8090
Mounting Bracket

150028090
504379078: RNCC: 3 | RNVC: 2

3 Oct 2013

5340-15-007-9498
Retaining Strap

150079498
449012: RNCC: 3 | RNVC: 2
449012: RNCC: 5 | RNVC: 9

22 Sep 1980

5340-15-009-6359
Retaining Strap

150096359
1161164: RNCC: 3 | RNVC: 2

17 Oct 1980

5340-15-101-8122
Strap Fastener Loop

151018122
999-0500-57-101: RNCC: 3 | RNVC: 2

2 Dec 1987

5340-15-178-9917
T Bracket

151789917
RS 404 605 B: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-198-1962
Filler Opening Cap

151981962
0801001: RNCC: 3 | RNVC: 2

24 Jun 2004

5340-15-119-9070
Rod End Clevis

151199070
142004147: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-121-5403
Access Cover

151215403
132506103: RNCC: 3 | RNVC: 2

15 Jan 1996

5340-15-163-4055
Access Cover

151634055
9924501: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-116-2679
Rod End Connector

151162679
190518225: RNCC: 3 | RNVC: 2

15 Apr 1993

5340-15-148-2834
Butt Hinge Leaf

151482834
9AA3020A043-101: RNCC: 3 | RNVC: 2

20 Jul 1998

5340-15-108-9868
Angle Bracket

151089868
1397815: RNCC: 3 | RNVC: 2

9 May 1988

5340-15-118-3379
Angle Bracket

151183379
60143721: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-118-3340
Retaining Strap

151183340
60147028: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-118-3855
Mending Plate

151183855
60165245: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-003-3714
Access Cover

150033714
0152.110.002.00: RNCC: 3 | RNVC: 2

4 Nov 2013

5340-15-148-3479
Angle Bracket

151483479
103542: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-119-9653
Plain Solid Disk

151199653
73393F01: RNCC: 3 | RNVC: 2
73393F01: RNCC: 5 | RNVC: 9

22 May 1996

5340-15-109-4009
Retaining Strap

151094009
5194-212-01: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-120-0861
Angle Bracket

151200861
98443332: RNCC: 3 | RNVC: 2

19 Dec 1994

5340-15-007-3124
Handle Grip

150073124
6546-8: RNCC: 3 | RNVC: 2

16 Mar 1980

5340-15-060-2685
Hand Crank

150602685
2-02320: RNCC: 3 | RNVC: 2

9 Feb 1977

5340-15-204-2886
Retaining Clip

152042886
UNI8833-A-2: RNCC: 3 | RNVC: 2
(241)A2666UNI8833-A-2: RNCC: 5 | RNVC: 2

18 Oct 2011

5340-15-181-1732
Loop Clamp

151811732
165040110: RNCC: 3 | RNVC: 2
(241)A0199165040110: RNCC: 5 | RNVC: 2

5 Nov 2008

5340-15-197-8967
Door Handle

151978967
0000500403816: RNCC: 3 | RNVC: 2
(241)A39630000500403816: RNCC: 5 | RNVC: 2

24 May 2004

5340-15-116-4817
Angle Bracket

151164817
60150607: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-001-4399
Access Cover

150014399
8053091: RNCC: 3 | RNVC: 2

2 Jul 2013

5340-15-129-0295
Angle Bracket

151290295
898322: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-003-9072
Mounting Plate

150039072
182741038: RNCC: 3 | RNVC: 2
(241)A0199182741038: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-120-2736
Angle Bracket

151202736
60166025: RNCC: 3 | RNVC: 2

9 Mar 1995

5340-15-060-7016
Mending Plate

150607016
P36HB14: RNCC: 5 | RNVC: 2
P36HB14: RNCC: 5 | RNVC: 9

12 Sep 1977

5340-15-120-4884
Access Cover

151204884
142501139: RNCC: 3 | RNVC: 2

9 Jun 1995

5340-15-151-6489
Access Cover

151516489
J52452048-002: RNCC: 3 | RNVC: 2

21 Jun 2000

5340-15-147-4609
Plug Button

151474609
PS701-6225-004: RNCC: 3 | RNVC: 2
PS701-6225-004: RNCC: 5 | RNVC: 2

1 Dec 1997

5340-15-111-3857
Access Cover

151113857
129-0110-28-103: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-15-006-3292
Angle Bracket

150063292
8471249: RNCC: 3 | RNVC: 2
8471249: RNCC: 5 | RNVC: 9
8471249: RNCC: 5 | RNVC: 9

24 Nov 1979

5340-15-110-0305
Retaining Strap

151100305
08218-101A1: RNCC: 3 | RNVC: 2

12 Mar 1990

5340-15-118-6612
Access Cover

151186612
73125874: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-179-7695
Mounting Plate

151797695
GW34852: RNCC: 3 | RNVC: 2

3 Aug 2007

5340-15-117-5709
Retaining Strap

151175709
1Z 592474: RNCC: 3 | RNVC: 2
1Z 592474: RNCC: 5 | RNVC: 9

21 Mar 1996

5340-15-120-4766
Access Cover

151204766
1Z 592865: RNCC: 3 | RNVC: 2
1Z 592865: RNCC: 5 | RNVC: 9

5 Nov 1996

5340-15-155-1014
Handle Grip

151551014
142014137: RNCC: 2 | RNVC: 3

18 Jan 2002

5340-15-109-0074
Butt Hinge Leaf

151090074
1395478: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-199-6616
Loop Clamp

151996616
EN4113F25WH: RNCC: 2 | RNVC: 2

17 May 2005

5340-15-062-7258
Mending Plate

150627258
1235-81-104: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-109-6728
Angle Bracket

151096728
72-042-410: RNCC: 3 | RNVC: 2
72-042-410: RNCC: 5 | RNVC: 9

16 Apr 1978

5340-15-107-1424
Screw Thread Insert

151071424
IN22BM3: RNCC: 3 | RNVC: 2
7-210091403: RNCC: 5 | RNVC: 2

14 Apr 1987

5340-15-149-2863
Angle Bracket

151492863
4824798: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-107-8801
Angle Bracket

151078801
60134402: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-007-0134
Retaining Strap

150070134
62314-101: RNCC: 3 | RNVC: 2

28 Jan 1980

5340-15-102-0795
Butt Hinge Leaf

151020795
213A7057-001: RNCC: 3 | RNVC: 2

29 Jul 1988

5340-15-112-8029
Angle Bracket

151128029
252A1336-001: RNCC: 3 | RNVC: 2

27 Oct 1990

5340-15-109-5969
Expansion Plug

151095969
10158850: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-100-8282
Retaining Strap

151008282
21610088A: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-113-5694
Bow Handle

151135694
69703-101B00: RNCC: 3 | RNVC: 2

14 Jan 1992

5340-15-122-2057
Mounting Plate

151222057
8A0053127: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-147-7678
Expansion Plug

151477678
77797: RNCC: 3 | RNVC: 2
77797F01: RNCC: 3 | RNVC: 2
77797F01: RNCC: 5 | RNVC: 2
77797F01: RNCC: 5 | RNVC: 9

26 Nov 1999

5340-15-204-4853
Clamping Catch

152044853
107300180: RNCC: 3 | RNVC: 2
107300180: RNCC: 5 | RNVC: 2
CV173642: RNCC: 5 | RNVC: 2

7 Nov 2011

5340-15-151-2275
Angle Bracket

151512275
60184888: RNCC: 3 | RNVC: 2

2 May 2000

5340-15-009-0725
Angle Bracket

150090725
4972729: RNCC: 3 | RNVC: 2

27 Aug 1979

5340-15-153-5226
Access Cover

151535226
142058812: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-020-2204
Leather Strap

150202204
01-231M81: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-109-5763
Angle Bracket

151095763
20530635A: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-052-2225
Loop Clamp

150522225
N0R2-505-06-9A: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-120-2726
Retaining Strap

151202726
17314590: RNCC: 3 | RNVC: 2
A203019-000: RNCC: 5 | RNVC: 2

9 Mar 1995

5340-15-179-2687
Mounting Plate

151792687
109-0816-38-117: RNCC: 3 | RNVC: 2

10 Aug 2006

Load More Results