What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 20 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 20 of 72

5340-15-163-3925
Access Cover

151633925
9818661: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-001-7969
Mounting Bracket

150017969
5949790485: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-197-1751
Rim Lock Set

151971751
PN UAS 00035683: RNCC: 3 | RNVC: 2
5340F76030754: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-112-2563
Access Door Hinge

151122563
113A6022-007: RNCC: 3 | RNVC: 2

28 Feb 1991

5340-15-059-3448
Retaining Strap

150593448
1127-40-309: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-001-0293
Mounting Plate

150010293
504378400: RNCC: 3 | RNVC: 2

15 May 2013

5340-15-110-7866
Mending Plate

151107866
1384124: RNCC: 3 | RNVC: 2

30 Apr 1988

5340-15-116-4765
Butt Hinge Leaf

151164765
60165639: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-009-2411
Angle Bracket

150092411
DIS. SESTAVECO 152006: RNCC: 3 | RNVC: 2
DIS. SESTAVECO 152006: RNCC: 5 | RNVC: 9

19 Aug 1980

5340-15-002-5490
Strapping

150025490
504181304: RNCC: 3 | RNVC: 2

3 Sep 2013

5340-15-115-9691
Vent Plug

151159691
MART.5519: RNCC: 3 | RNVC: 2
MART.5519: RNCC: 5 | RNVC: 9

28 Sep 1993

5340-15-059-3594
Retaining Strap

150593594
1127-32-261: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-002-1908
Loop Clamp

150021908
A071A050HC: RNCC: 3 | RNVC: 2

25 Jul 2013

5340-15-109-0167
Loop Clamp

151090167
60101169: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-065-9671
Retaining Strap

150659671
1376-18-649: RNCC: 3 | RNVC: 2
137618649: RNCC: 5 | RNVC: 2

5 Apr 1994

5340-15-110-0301
Retaining Strap

151100301
28030-101A1: RNCC: 3 | RNVC: 2

17 Feb 1990

5340-15-058-6945
Handle Grip

150586945
AF106-03B9: RNCC: 3 | RNVC: 2

11 Mar 1975

5340-15-100-4498
Angle Bracket

151004498
97032-101: RNCC: 3 | RNVC: 2

24 Mar 1987

5340-15-063-7425
Mending Plate

150637425
40.50.01.379: RNCC: 3 | RNVC: 2
19.20.34.20: RNCC: 5 | RNVC: 2

30 May 1983

5340-15-101-9145
Spring Holder

151019145
1P306109: RNCC: 3 | RNVC: 2
1P306109: RNCC: 5 | RNVC: 9

25 Nov 1992

5340-15-004-7800
Retaining Strap

150047800
0-09053: RNCC: 3 | RNVC: 2

7 Sep 1977

5340-15-180-3895
Mounting Bracket

151803895
93932108: RNCC: 3 | RNVC: 2
(241)A424993932108: RNCC: 5 | RNVC: 2

7 May 2008

5340-15-156-1876
Loop Clamp

151561876
60163597: RNCC: 3 | RNVC: 2

11 Dec 2002

5340-15-005-6837
Retaining Ring

150056837
0060: RNCC: 3 | RNVC: 2

14 Jun 1979

5340-15-117-6105
Loop Clamp

151176105
MC403.20C: RNCC: 3 | RNVC: 2

30 Mar 1996

5340-15-163-3670
Bridge Clamp

151633670
8028489: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-108-6748
Retaining Strap

151086748
4799004: RNCC: 3 | RNVC: 2

22 Feb 1989

5340-15-064-1342
Plug Button

150641342
999-5001-10-136: RNCC: 3 | RNVC: 2

21 Oct 1983

5340-15-187-3627
Self-Locking Insert

151873627
701/16504: RNCC: 3 | RNVC: 2
(241)AD751701/16504: RNCC: 5 | RNVC: 2
701/16504: RNCC: 5 | RNVC: 2

19 Mar 2009

5340-15-204-3371
Tubular Fairlead

152043371
25100205: RNCC: 3 | RNVC: 2
(241)ACA6425100205: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-158-6126
Casement Fastener

151586126
122607348: RNCC: 3 | RNVC: 2

10 Mar 2004

5340-15-199-4807
Angle Bracket

151994807
1P 340314: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-15-163-4068
Access Cover

151634068
99452322: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-153-3148
Mending Plate

151533148
122643112: RNCC: 2 | RNVC: 3

13 Dec 2000

5340-15-108-7539
Plain Solid Disk

151087539
1376-62-217: RNCC: 3 | RNVC: 2
137662217: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-107-8262
Expansion Plug

151078262
90.9000.27: RNCC: 3 | RNVC: 2

9 Jul 1989

5340-15-008-6329
Rod End Clevis

150086329
22168: RNCC: 3 | RNVC: 2

16 Nov 1981

5340-15-001-7930
Mounting Bracket

150017930
500420109: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-152-2263
Retaining Clip

151522263
PAGX0650219: RNCC: 3 | RNVC: 2

10 Aug 2000

5340-15-119-9058
Loop Clamp

151199058
3306: RNCC: 3 | RNVC: 2
180536160: RNCC: 5 | RNVC: 2

17 Nov 1994

5340-15-002-1455
Access Cover

150021455
5801451139: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-074-4001
Retaining Strap

150744001
6UNI2138: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-119-1880
Access Cover

151191880
75214925: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-123-4169
Angle Bracket

151234169
7532022: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-051-7992
Loop Clamp

150517992
1-02912-90: RNCC: 3 | RNVC: 2
10291290: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-105-8396
Retaining Band

151058396
750/37: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-117-9093
Butt Hinge Leaf

151179093
214A2028-021: RNCC: 3 | RNVC: 2

31 Jan 1994

5340-15-062-1769
Bow Handle

150621769
3-21797.0000//D: RNCC: 5 | RNVC: 2
3-21797D: RNCC: 5 | RNVC: 2
21797.0000: RNCC: 5 | RNVC: 2
21797.0000: RNCC: 5 | RNVC: 9
3-21797D: RNCC: 5 | RNVC: 9
3-21797.0000//D: RNCC: 5 | RNVC: 9

28 Sep 1981

5340-15-127-4012
Spring Tension Clip

151274012
1740-60-021: RNCC: 3 | RNVC: 2
1740-60-021: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-118-3345
Retaining Strap

151183345
60146323: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-120-3454
Catch Strike

151203454
60174480: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-107-8761
Angle Bracket

151078761
42067670: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-108-4286
Loop Clamp

151084286
4625287: RNCC: 3 | RNVC: 2

5 Jan 1989

5340-15-177-4399
Mounting Bracket

151774399
052153: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-152-7905
Mounting Bracket

151527905
P131104: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-179-7311
Mounting Bracket

151797311
500304181: RNCC: 3 | RNVC: 2
(241)A4249500304181: RNCC: 5 | RNVC: 2

7 Jun 2007

5340-15-125-3323
Angle Bracket

151253323
4783805: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-006-4456
Retaining Ring

150064456
945700P: RNCC: 3 | RNVC: 2

29 Jun 1979

5340-15-156-1505
Mending Plate

151561505
991241066: RNCC: 3 | RNVC: 2
42536455: RNCC: 5 | RNVC: 2

6 Dec 2002

5340-15-148-6567
Angle Bracket

151486567
190525204: RNCC: 3 | RNVC: 2

17 Sep 1998

5340-15-148-7170
Access Cover

151487170
399 86: RNCC: 3 | RNVC: 2
399 86: RNCC: 5 | RNVC: 9

28 Sep 1998

5340-15-187-4671
Bail Handle

151874671
750-266: RNCC: 3 | RNVC: 2
(241)AA136750-266: RNCC: 5 | RNVC: 2

2 Apr 2009

5340-15-066-4289
Rod End Clevis

150664289
68-600120-007: RNCC: 3 | RNVC: 2

12 Dec 1984

5340-15-152-0215
Retaining Strap

151520215
0-173221: RNCC: 3 | RNVC: 2
00173221: RNCC: 3 | RNVC: 2
(241)A39630-173221: RNCC: 5 | RNVC: 2

2 Aug 2000

5340-15-180-6472
Mounting Bracket

151806472
E78-F1126: RNCC: 3 | RNVC: 2
(241)SCT56E78-F1126: RNCC: 5 | RNVC: 2
E78-F1126: RNCC: 5 | RNVC: 2

1 Jul 2008

5340-15-108-7228
Mending Plate

151087228
60143636: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-109-1795
Retaining Strap

151091795
60103785: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-108-8429
Rod End Clevis

151088429
G10X40-OT: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-000-4782
Retaining Bail

150004782
45019975: RNCC: 3 | RNVC: 2
45019975: RNCC: 5 | RNVC: 2

11 Mar 2013

5340-15-108-6266
Retaining Strap

151086266
7167797: RNCC: 3 | RNVC: 2
(7001)5340151086266: RNCC: 5 | RNVC: 2

30 Mar 1988

5340-15-007-3046
Lock-Release Lever

150073046
9844018: RNCC: 3 | RNVC: 2

7 Jan 2014

5340-15-120-2490
Angle Bracket

151202490
98485521: RNCC: 3 | RNVC: 2

6 Mar 1995

5340-15-175-1362
Mounting Plate

151751362
8.471.185: RNCC: 3 | RNVC: 2

21 Jan 2004

5340-15-119-0134
Retaining Strap

151190134
70604160: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-007-2208
Retaining Strap

150072208
1397279: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-159-9654
Clamping Catch

151599654
122603371: RNCC: 3 | RNVC: 2

19 Apr 2004

5340-15-110-7868
Mending Plate

151107868
8559601: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-001-8060
Mounting Plate

150018060
5949790717: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-105-8968
Spring Tension Clip

151058968
8982384: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-067-9300
Catch Strike

150679300
24136-102: RNCC: 3 | RNVC: 2

3 Mar 1986

5340-15-005-5316
Lock-Release Lever

150055316
1026-01-275: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-116-1864
Rod End Clevis

151161864
190512137: RNCC: 3 | RNVC: 2

24 Mar 1993

5340-15-111-3791
Strap Hinge

151113791
113A6012-009: RNCC: 3 | RNVC: 2

7 Sep 1990

5340-15-147-3816
Retaining Clip

151473816
635C01260-101: RNCC: 3 | RNVC: 2

31 Oct 1997

5340-15-201-6243
Butt Hinge

152016243
0213-47261: RNCC: 3 | RNVC: 2
(241)AF604CLABMEC013: RNCC: 5 | RNVC: 2
C-LAB-MEC-013: RNCC: 5 | RNVC: 2

2 Nov 2006

5340-15-203-6535
Mounting Plate

152036535
504267669: RNCC: 3 | RNVC: 2

24 Jun 2011

5340-15-119-4029
Angle Bracket

151194029
60173240: RNCC: 3 | RNVC: 2

25 Jul 1994

5340-15-187-4823
Loop Clamp

151874823
A071A026NB: RNCC: 1 | RNVC: 2
TA028M014NB26: RNCC: 3 | RNVC: 2
(241)84971TA028M014NB26: RNCC: 5 | RNVC: 2

3 Apr 2009

5340-15-153-9069
Mounting Bracket

151539069
00085362: RNCC: 3 | RNVC: 2
(241)A333400085362: RNCC: 4 | RNVC: 1
9536T2: RNCC: 5 | RNVC: 2

9 Mar 2001

5340-15-007-7854
Loop Clamp

150077854
747: RNCC: 3 | RNVC: 2

10 May 1980

5340-15-187-2499
Retaining Clip

151872499
OMP00000883: RNCC: 3 | RNVC: 2
(241)AE591OMP00000883: RNCC: 5 | RNVC: 2

9 Mar 2009

5340-15-001-1444
Mortise Latch

150011444
9453928: RNCC: 3 | RNVC: 2

31 May 2013

5340-15-063-8106
Expansion Plug

150638106
1/42833/70: RNCC: 3 | RNVC: 2

31 Mar 1982

5340-15-051-5024
Loop Clamp

150515024
T2M20C: RNCC: 3 | RNVC: 2
712228F: RNCC: 5 | RNVC: 2

31 Dec 1975

5340-15-005-0984
Angle Bracket

150050984
1137-08-174: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-151-4087
Angle Bracket

151514087
98168691 ZINCATA: RNCC: 3 | RNVC: 2
(241)A39630-168692: RNCC: 5 | RNVC: 2
0-168692: RNCC: 5 | RNVC: 2
1PA39630-168692: RNCC: 5 | RNVC: 2

22 May 2000

5340-15-107-9815
Angle Bracket

151079815
C7188-W11-C1: RNCC: 3 | RNVC: 2
C7188-W11-C1: RNCC: 5 | RNVC: 2
C7188-W11-C1: RNCC: 5 | RNVC: 9

7 Sep 1989

5340-15-118-1939
Mending Plate

151181939
60121209: RNCC: 3 | RNVC: 2

22 Apr 1994

5340-15-116-2665
Angle Bracket

151162665
190518233: RNCC: 3 | RNVC: 2

15 Apr 1993

5340-15-073-5619
Flush Lock

150735619
19880-030: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-151-4306
Angle Bracket

151514306
0-171769: RNCC: 3 | RNVC: 2
1PA39630-171769: RNCC: 5 | RNVC: 2
(241)A39630-171769: RNCC: 5 | RNVC: 2

24 May 2000

5340-15-121-0605
Screw Thread Insert

151210605
M2.5(X0.45)X2D-ACC.INOX18/8AUST-: RNCC: 3 | RNVC: 1
210602560: RNCC: 5 | RNVC: 2

21 Sep 1995

5340-15-231-9644
Angle Bracket

152319644
42030426: RNCC: 3 | RNVC: 2
251015E156835: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-118-9099
Rod End Clevis

151189099
70628736: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-164-1864
Angle Bracket

151641864
181452060: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-121-5731
Retaining Strap

151215731
1P 541524: RNCC: 3 | RNVC: 2
1P 541524: RNCC: 5 | RNVC: 9

18 Sep 1996

5340-15-147-8900
Pipe Hanger

151478900
ZIM40: RNCC: 3 | RNVC: 2
CAE00461: RNCC: 5 | RNVC: 2

18 May 1998

5340-15-157-6423
Block Clamp

151576423
AIT13901EEE4505: RNCC: 3 | RNVC: 2

12 Oct 2003

5340-15-003-1568
Mounting Bracket

150031568
500379570: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-121-6642
Mounting Bracket

151216642
800057737: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-062-7938
Angle Bracket

150627938
0-34189: RNCC: 3 | RNVC: 2

28 Aug 1982

5340-15-061-5951
Retaining Strap

150615951
P945111-001: RNCC: 3 | RNVC: 2

2 Mar 1978

5340-15-060-4401
Screw Thread Insert

150604401
67454-101: RNCC: 3 | RNVC: 2

13 Apr 1977

5340-15-157-9293
Angle Bracket

151579293
00178397: RNCC: 3 | RNVC: 2
0-178397: RNCC: 3 | RNVC: 2
1PA39630-178397: RNCC: 5 | RNVC: 2
(241)A39630-178397: RNCC: 5 | RNVC: 2

25 Nov 2003

5340-15-207-8880
Access Cover

152078880
9441094: RNCC: 3 | RNVC: 2

21 Nov 2012

5340-15-062-1926
Angle Bracket

150621926
P-892778-001: RNCC: 3 | RNVC: 2
P892778-001: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-109-7167
Retaining Strap

151097167
4811967: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-117-9601
Retaining Strap

151179601
311104F01: RNCC: 3 | RNVC: 2
311104F01: RNCC: 5 | RNVC: 9

21 Mar 1996

5340-15-109-1820
Mending Plate

151091820
1357076: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-007-2225
Angle Bracket

150072225
1398373: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-007-2615
Angle Bracket

150072615
1387735: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-106-2479
Key Holder

151062479
V.393-25X56: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-122-3933
Angle Bracket

151223933
D1404959: RNCC: 3 | RNVC: 2

20 Jun 2000

5340-15-119-7145
Angle Bracket

151197145
60173221: RNCC: 3 | RNVC: 2

8 Nov 1994

5340-15-063-1681
Retaining Ring

150631681
0070201100: RNCC: 3 | RNVC: 2

8 Jun 1981

5340-15-119-0271
Angle Bracket

151190271
70687975: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-193-9762
Mounting Plate

151939762
71485255: RNCC: 3 | RNVC: 2

10 Aug 2010

5340-15-151-4193
Mending Plate

151514193
0-104163: RNCC: 3 | RNVC: 2

23 May 2000

5340-15-119-1618
Mounting Bracket

151191618
75208255: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-102-4511
Butt Hinge

151024511
213A7341-401: RNCC: 3 | RNVC: 2

30 Aug 1988

5340-15-187-4826
Hose Clamp

151874826
A437A007A: RNCC: 1 | RNVC: 2
BAS247C1-1: RNCC: 3 | RNVC: 2
(241)U1901BAS247C1-1: RNCC: 5 | RNVC: 2

3 Apr 2009

5340-15-063-2744
Angle Bracket

150632744
60108126: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-153-0061
Retaining Strap

151530061
206038: RNCC: 3 | RNVC: 2

14 Nov 2000

5340-15-007-1821
Angle Bracket

150071821
1393553: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-118-7289
Retaining Strap

151187289
73127628: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-119-5676
Mending Plate

151195676
4861028: RNCC: 3 | RNVC: 2

19 Sep 1994

5340-15-198-4163
Screw Thread Insert

151984163
122628202: RNCC: 3 | RNVC: 2

27 Sep 2004

5340-15-178-3019
Angle Bracket

151783019
1Q 608269: RNCC: 3 | RNVC: 2

29 Apr 2005

5340-15-151-2734
Mending Plate

151512734
3202323: RNCC: 3 | RNVC: 2
553202323000: RNCC: 5 | RNVC: 2

8 Jun 2000

5340-15-063-4145
Loop Clamp

150634145
60107855: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-055-8641
Loop Clamp

150558641
260-14-128-11: RNCC: 3 | RNVC: 2
260-14-128-11: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-116-7691
Retaining Strap

151167691
8106C/52: RNCC: 3 | RNVC: 2

20 Apr 1994

5340-15-153-4173
Mending Plate

151534173
5127-281-01: RNCC: 3 | RNVC: 2

17 Jan 2001

5340-15-152-5896
Handle Grip

151525896
P42-34-05: RNCC: 3 | RNVC: 2

27 Sep 2000

5340-15-197-2106
Expansion Shield

151972106
PN UAS 00044073: RNCC: 3 | RNVC: 2
3470F76036652: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-118-2643
Loop Clamp

151182643
D1408307: RNCC: 3 | RNVC: 2

11 Apr 1995

5340-15-108-1668
Bridge Clamp

151081668
1576-18-215: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-062-7918
Retaining Strap

150627918
0-34168: RNCC: 3 | RNVC: 2

28 Aug 1982

5340-15-163-4000
Flush Lock

151634000
9844649: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-162-4107
Mounting Bracket

151624107
9285.046: RNCC: 3 | RNVC: 2

16 Aug 2001

5340-15-122-3550
Mounting Bracket

151223550
D1408889: RNCC: 3 | RNVC: 2

8 Jun 2000

5340-15-103-0953
Butt Hinge

151030953
DE013.13.383: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-177-4320
Bridge Clamp

151774320
050995: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-109-1824
Mending Plate

151091824
60103575: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-004-4482
Loop Clamp

150044482
180-2594: RNCC: 3 | RNVC: 2

30 May 1978

5340-15-200-2993
Access Cover

152002993
190509389: RNCC: 3 | RNVC: 2

29 Nov 2005

5340-15-194-7823
Mending Plate

151947823
50193: RNCC: 3 | RNVC: 2
(241)A348850193: RNCC: 5 | RNVC: 2

14 Jan 2011

5340-15-061-2073
Lock-Release Lever

150612073
000200592600: RNCC: 5 | RNVC: 2
000200592600: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-002-2811
Retaining Bail

150022811
504214791: RNCC: 3 | RNVC: 2

2 Aug 2013

5340-15-120-3529
Loop Clamp

151203529
17314890: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-162-2792
Block Clamp

151622792
291A03110-101: RNCC: 3 | RNVC: 2

4 Jun 2001

5340-15-110-6676
Plain Solid Disk

151106676
1905-15-243: RNCC: 3 | RNVC: 2

15 Jan 1990

5340-15-059-2708
Loop Clamp

150592708
260-07-01-21: RNCC: 3 | RNVC: 2
260-07-01-21: RNCC: 5 | RNVC: 9

18 Nov 1975

5340-15-150-0815
Access Cover

151500815
C7271-W100-N1: RNCC: 3 | RNVC: 2
AFC-1001: RNCC: 5 | RNVC: 2

29 Jul 1999

5340-15-112-8030
Angle Bracket

151128030
252A1339-001: RNCC: 3 | RNVC: 2

27 Oct 1990

5340-15-121-7408
Expansion Plug

151217408
60158839.00.05.00: RNCC: 3 | RNVC: 2
93158780: RNCC: 5 | RNVC: 2

12 Feb 1996

5340-15-118-7498
Mounting Bracket

151187498
9433725: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-186-8967
Mounting Bracket

151868967
147777: RNCC: 3 | RNVC: 2
0028950: RNCC: 5 | RNVC: 2

5 Jan 2009

5340-15-148-5798
Butt Hinge Leaf

151485798
129-0340-01-211: RNCC: 3 | RNVC: 2

31 Aug 1998

5340-15-062-9030
Angle Bracket

150629030
0-55048: RNCC: 3 | RNVC: 2

9 Jul 1981

5340-15-002-3146
Mounting Bracket

150023146
504163940: RNCC: 3 | RNVC: 2

6 Aug 2013

5340-15-119-5590
Angle Bracket

151195590
4881572: RNCC: 3 | RNVC: 2

19 Sep 1994

5340-15-151-1801
Loop Clamp

151511801
IAWCSJ00000: RNCC: 3 | RNVC: 2

14 Apr 2000

5340-15-163-4056
Mounting Plate

151634056
9924502: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-157-6129
Support Hook

151576129
11030127: RNCC: 3 | RNVC: 2
(241)A977211030127: RNCC: 5 | RNVC: 2

9 Oct 2003

5340-15-005-5346
Rod End Connector

150055346
1026-01-154: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-119-2320
Plug Button

151192320
100-046S84B1: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-155-3028
Protection Bellows

151553028
60173173: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-15-008-4170
Loop Clamp

150084170
SF260-13-242-11: RNCC: 3 | RNVC: 2
SF260-13-242-11: RNCC: 5 | RNVC: 9

15 Sep 1981

5340-15-073-5624
Flush Lock

150735624
19890-015: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-113-4789
Retaining Strap

151134789
311A3757-001: RNCC: 3 | RNVC: 2

22 Mar 1991

5340-15-179-9558
Bridge Clamp

151799558
00168075: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-005-4624
Retaining Strap

150054624
92256-101: RNCC: 3 | RNVC: 2

20 Mar 1979

5340-15-203-9675
Filler Opening Cap

152039675
TCO 501: RNCC: 3 | RNVC: 2
(241)A7734TCO 501: RNCC: 5 | RNVC: 2

29 Jul 2011

5340-15-151-1908
Mounting Bracket

151511908
FL250021400: RNCC: 3 | RNVC: 2

14 Apr 2000

5340-15-187-4465
Access Cover

151874465
109-3900-78-113: RNCC: 3 | RNVC: 2

31 Mar 2009

5340-15-194-5241
Mounting Plate

151945241
18HJ04543212S01-409: RNCC: 3 | RNVC: 2
(241)A001918HJ04543212S01-409: RNCC: 5 | RNVC: 2

30 Nov 2010

5340-15-052-1384
Loop Clamp

150521384
788-12-70-13: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-189-0607
Handle Grip

151890607
1888MDK113/7: RNCC: 3 | RNVC: 2
(241)A51501888MDK113/7: RNCC: 5 | RNVC: 2

21 Jan 2010

5340-15-151-1445
Mounting Bracket

151511445
380-2391/01: RNCC: 3 | RNVC: 2

30 Mar 2000

5340-15-178-9239
Angle Bracket

151789239
TN122MD013AA00: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-15-153-9882
Hand Crank

151539882
2333040001: RNCC: 3 | RNVC: 2

14 Mar 2001

5340-15-103-6287
Expansion Plug

151036287
21770060A: RNCC: 3 | RNVC: 2

26 Nov 1987

5340-15-179-6477
Angle Bracket

151796477
J53350630-003: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-102-0799
Butt Hinge Leaf

151020799
213A7194-001: RNCC: 3 | RNVC: 2

29 Jul 1988

5340-15-009-3598
Mending Plate

150093598
1376-18-656: RNCC: 3 | RNVC: 2
137618656: RNCC: 5 | RNVC: 2

1 Jun 1987

5340-15-187-1183
Door Hook And Eye

151871183
5080/05/01: RNCC: 3 | RNVC: 2
RWB288: RNCC: 5 | RNVC: 2

19 Feb 2009

5340-15-060-0617
Angle Bracket

150600617
1276-05-599: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-107-1468
Lock-Release Lever

151071468
303-13-1260: RNCC: 3 | RNVC: 2

14 Apr 1987

5340-15-118-9646
Angle Bracket

151189646
75206855: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-195-2735
Mounting Bracket

151952735
3003M132A2: RNCC: 3 | RNVC: 2
3003M132A2: RNCC: 5 | RNVC: 2

9 Mar 2011

5340-15-195-2175
Mounting Bracket

151952175
209711100: RNCC: 3 | RNVC: 2
209711100: RNCC: 5 | RNVC: 2
CV173667: RNCC: 5 | RNVC: 2

7 Mar 2011

5340-15-060-2666
Mending Plate

150602666
22080-101: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-15-197-2112
Expansion Shield

151972112
PN UAS 00047219: RNCC: 3 | RNVC: 2
5930F76037960: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-178-6224
Mounting Bracket

151786224
4M.00756: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-065-4247
Retaining Strap

150654247
5989466: RNCC: 3 | RNVC: 2
5989466: RNCC: 5 | RNVC: 9

24 Oct 1983

5340-15-119-7143
Angle Bracket

151197143
60173207: RNCC: 3 | RNVC: 2

8 Nov 1994

5340-15-199-1257
T Plate

151991257
87580-101: RNCC: 3 | RNVC: 2

17 Jan 2005

5340-15-008-1863
Angle Bracket

150081863
60114974: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-147-1762
Rod End Clevis

151471762
263A1672-001: RNCC: 3 | RNVC: 2

6 Oct 1997

5340-15-059-2481
Retaining Strap

150592481
1127-40-204: RNCC: 3 | RNVC: 2

12 Oct 1974

5340-15-005-4892
Detent Plunger

150054892
1026-02-178: RNCC: 3 | RNVC: 2

8 Jan 1998

5340-15-193-7303
Retaining Band

151937303
4006209455012: RNCC: 3 | RNVC: 2
(241)A60284006209455012: RNCC: 5 | RNVC: 2

2 Jul 2010

5340-15-060-1409
Mending Plate

150601409
851: RNCC: 3 | RNVC: 2
1376-19-220: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-122-4196
Angle Bracket

151224196
212-9010-65-13: RNCC: 3 | RNVC: 2

18 Jul 1996

5340-15-147-6339
Mounting Bracket

151476339
P-1802: RNCC: 3 | RNVC: 2

5 Feb 1998

5340-15-007-4260
Angle Bracket

150074260
P-110259-004: RNCC: 3 | RNVC: 2
P110259-004: RNCC: 5 | RNVC: 2

12 Mar 1980

5340-15-041-1422
Angle Bracket

150411422
2-4752-101-24091-6: RNCC: 3 | RNVC: 2
2-4752-1-01-24091-6: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-203-7384
Mounting Plate

152037384
504106517: RNCC: 3 | RNVC: 2

27 Jun 2011

5340-15-008-1014
Retaining Strap

150081014
4462841: RNCC: 3 | RNVC: 2
4462841: RNCC: 5 | RNVC: 9

29 Sep 1980

5340-15-177-4319
Bridge Clamp

151774319
050990: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-063-3447
Bow Handle

150633447
60109569: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-188-1839
Blank Panel

151881839
323ACA060-1TR: RNCC: 3 | RNVC: 2

27 Jul 2009

5340-15-151-5650
Access Cover

151515650
99477104: RNCC: 3 | RNVC: 2
A040015-027: RNCC: 5 | RNVC: 2
(241)A424999477104: RNCC: 5 | RNVC: 2

7 Jun 2000

5340-15-194-1819
Mounting Bracket

151941819
210F503-7800-02: RNCC: 3 | RNVC: 2

29 Sep 2010

5340-15-187-3813
Loop Clamp

151873813
N 90768301: RNCC: 3 | RNVC: 2
(241)AG253N90768301: RNCC: 5 | RNVC: 2

23 Mar 2009

5340-15-178-9430
Mounting Bracket

151789430
TN061MD002AA00: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-15-066-4448
Rod End Clevis

150664448
65.19.001.0: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-109-7410
Angle Bracket

151097410
60132593: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-113-5443
Angle Bracket

151135443
377A1229-003: RNCC: 3 | RNVC: 2

14 Jan 1992

5340-15-068-9700
Lock-Release Lever

150689700
AF.106-07A-131: RNCC: 3 | RNVC: 2
AF 106-07A-131: RNCC: 5 | RNVC: 2

9 Jun 1986

5340-15-187-5737
Bow Handle

151875737
TAK-0183/01: RNCC: 3 | RNVC: 2

9 Apr 2009

5340-15-150-2361
Access Cover

151502361
A0117200: RNCC: 3 | RNVC: 2

27 Aug 1999

5340-15-004-4539
Retaining Strap

150044539
180-4556: RNCC: 3 | RNVC: 2

30 May 1978

5340-15-061-5733
Angle Bracket

150615733
P-135235-001: RNCC: 3 | RNVC: 2
P135235-001: RNCC: 5 | RNVC: 2

6 Feb 1978

5340-15-151-6927
Loop Clamp

151516927
17317190 TAB 11-0760: RNCC: 3 | RNVC: 2
17317190 TAB 11-0760: RNCC: 4 | RNVC: 1
00106732: RNCC: 4 | RNVC: 1
(241)A396300106732: RNCC: 5 | RNVC: 2
(241)A39630-106732: RNCC: 5 | RNVC: 2
0-106732: RNCC: 5 | RNVC: 2
1PA39630-106732: RNCC: 5 | RNVC: 2

30 Jun 2000

5340-15-060-2894
Screw Thread Insert

150602894
2100-06-321: RNCC: 3 | RNVC: 2
M 6 X100 1D: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-055-4463
Rod End Clevis

150554463
6-3149-301-39421: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-151-8124
Bow Handle

151518124
8600359: RNCC: 3 | RNVC: 2
(241)A39630-110321: RNCC: 5 | RNVC: 2
0-110321: RNCC: 5 | RNVC: 2
1PA39630-110321: RNCC: 5 | RNVC: 2

13 Jul 2000

5340-15-007-4974
Butt Hinge Leaf

150074974
1239-01-134: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-113-1720
Rod End Clevis

151131720
331A2293-001: RNCC: 3 | RNVC: 2

7 Sep 1990

5340-15-058-4900
Clip Retainer Plate

150584900
1407-00-21: RNCC: 3 | RNVC: 2
55-93-85-85: RNCC: 5 | RNVC: 2

1 Oct 1976

5340-15-122-0613
Mounting Plate

151220613
236CA170-1TR2: RNCC: 3 | RNVC: 2

23 Apr 1996

5340-15-115-4472
Handle Grip

151154472
SF260-12-32-101: RNCC: 3 | RNVC: 2
SF260-12-32-101: RNCC: 5 | RNVC: 9

29 Nov 1992

5340-15-178-8133
Metal Grille

151788133
6927.270: RNCC: 3 | RNVC: 2

15 Dec 2005

5340-15-108-0804
Access Cover

151080804
32-08-139: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-187-5584
Bow Handle

151875584
TAF-0022/01: RNCC: 3 | RNVC: 2

9 Apr 2009

5340-15-117-8827
Angle Bracket

151178827
SF260-14-287-11: RNCC: 3 | RNVC: 2
SF260-14-287-11: RNCC: 5 | RNVC: 9

28 Jan 1994

5340-15-009-2480
Angle Bracket

150092480
P-882743-002: RNCC: 3 | RNVC: 2

2 Sep 1980

5340-15-004-0675
Rod End Clevis

150040675
28148-101: RNCC: 3 | RNVC: 2

8 Feb 1978

5340-15-111-9502
Butt Hinge

151119502
700A2617-401: RNCC: 3 | RNVC: 2

30 Jan 1991

5340-15-061-4152
Clip Retainer Plate

150614152
P-135244-001: RNCC: 3 | RNVC: 2
P135244-001: RNCC: 5 | RNVC: 2

16 Jan 1978

5340-15-205-2642
Mounting Bracket

152052642
D1-27025-001: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-065-6593
Rod End Clevis

150656593
39X500-12-18: RNCC: 3 | RNVC: 2

19 Jun 1985

5340-15-060-8052
Mending Plate

150608052
000200101100: RNCC: 5 | RNVC: 2
1200096-111330081: RNCC: 5 | RNVC: 2
000200101100: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-009-7117
Mending Plate

150097117
1236-16-111: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-061-5953
Angle Bracket

150615953
P-125188-002: RNCC: 3 | RNVC: 2
P125188-002: RNCC: 5 | RNVC: 2

2 Mar 1978

5340-15-055-4347
Rod End Clevis

150554347
7-8953-201-49358: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-154-4030
Corner Brace

151544030
A6120-91093-11: RNCC: 3 | RNVC: 2

22 May 2001

5340-15-162-4219
Lock-Release Lever

151624219
150747-1: RNCC: 3 | RNVC: 2

25 Sep 2001

5340-15-181-1717
Control Rod

151811717
178950225: RNCC: 3 | RNVC: 2
(241)A0199178950225: RNCC: 5 | RNVC: 2

5 Nov 2008

5340-15-126-3878
Angle Bracket

151263878
GR5806: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-193-6603
Clamping Catch

151936603
163121157: RNCC: 3 | RNVC: 2
50-535 MS ZN: RNCC: 3 | RNVC: 2
(241)A0199163121157: RNCC: 5 | RNVC: 2
(241)A355450-535MSZN: RNCC: 5 | RNVC: 2

28 Jun 2010

5340-15-113-4432
Butt Hinge Leaf

151134432
68-307116-003: RNCC: 3 | RNVC: 2

26 Aug 1991

5340-15-062-5157
Angle Bracket

150625157
AB47-891-349-3: RNCC: 3 | RNVC: 2

22 Jul 1982

5340-15-152-8266
Bow Handle

151528266
341-8163/01: RNCC: 3 | RNVC: 2
1PA0069341-8163/01: RNCC: 3 | RNVC: 2

31 Oct 2000

5340-15-201-6965
Pawl Fastener

152016965
5007-30: RNCC: 3 | RNVC: 2

20 Nov 2006

5340-15-154-0345
Angle Bracket

151540345
0-106128: RNCC: 3 | RNVC: 2
1PA39630-106128: RNCC: 5 | RNVC: 2
(241)A39630-106128: RNCC: 5 | RNVC: 2

15 Mar 2001

5340-15-179-8931
Retaining Strap

151798931
D1404231: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-151-6089
Bridge Clamp

151516089
42018547: RNCC: 3 | RNVC: 2

19 Jun 2000

5340-15-152-3551
Angle Bracket

151523551
0-173976: RNCC: 3 | RNVC: 2
00173976: RNCC: 3 | RNVC: 2
(241)A39630-173976: RNCC: 5 | RNVC: 2

4 Sep 2000

5340-15-057-5517
Handle Grip

150575517
1276-23-409: RNCC: 3 | RNVC: 2
127623409: RNCC: 5 | RNVC: 2

31 Dec 1975

5340-15-147-3649
Access Cover

151473649
109-0731-41-103: RNCC: 3 | RNVC: 2

31 Oct 1997

5340-15-107-1125
Spring Holder

151071125
301-02-1040: RNCC: 3 | RNVC: 2

14 Apr 1987

5340-15-061-2215
Butt Hinge Leaf

150612215
260-02-10-12: RNCC: 3 | RNVC: 2
260-02-10-12: RNCC: 5 | RNVC: 9

30 May 1977

5340-15-168-9991
Coat And Hat Hook

151689991
F72004634: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-063-3236
Angle Bracket

150633236
60108253: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-181-1709
Handwheel

151811709
178950131: RNCC: 3 | RNVC: 2
(241)A0199178950131: RNCC: 5 | RNVC: 2

5 Nov 2008

5340-15-112-8614
Vent Plug

151128614
471830: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-117-6368
Mending Plate

151176368
142507334: RNCC: 3 | RNVC: 2

4 Jan 1994

5340-15-113-2793
Retaining Strap

151132793
08226-101A2: RNCC: 3 | RNVC: 2

30 May 1991

5340-15-052-0373
Loop Clamp

150520373
N0R2-505-05-15B: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-006-8225
Loop Clamp

150068225
N0R2-510-03-11: RNCC: 3 | RNVC: 2

19 Feb 1980

5340-15-187-5663
Mounting Bracket

151875663
TAK-0062/01: RNCC: 3 | RNVC: 2

9 Apr 2009

5340-15-007-2172
Angle Bracket

150072172
1391244: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-194-3837
Mounting Bracket

151943837
109-B700-35-181: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-15-148-3483
Angle Bracket

151483483
102531: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-007-1892
Retaining Strap

150071892
1387752: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-149-3105
Angle Bracket

151493105
4885904: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-127-1060
Angle Bracket

151271060
399477: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-008-0223
Plug Button

150080223
999-5001-10-130: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-156-1810
Loop Clamp

151561810
18088792: RNCC: 3 | RNVC: 2

11 Dec 2002

5340-15-153-9076
Mounting Bracket

151539076
00085404: RNCC: 3 | RNVC: 2
(241)A333400085404: RNCC: 4 | RNVC: 1
9540T4: RNCC: 5 | RNVC: 2

9 Mar 2001

5340-15-177-4208
Bridge Clamp

151774208
048061: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-001-5981
Mounting Bracket

150015981
5801576886: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-002-1498
Mounting Bracket

150021498
5801337052: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-150-1260
Loop Clamp

151501260
4150070: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-199-7153
Protection Bellows

151997153
8143617: RNCC: 3 | RNVC: 2
(241)A42498143617: RNCC: 5 | RNVC: 2

18 May 2005

5340-15-122-5885
Mechanical Stop

151225885
311293F92: RNCC: 3 | RNVC: 2

10 Sep 1996

5340-15-149-1168
Access Cover

151491168
60186334: RNCC: 3 | RNVC: 2

2 Dec 1998

5340-15-008-1666
Screw Thread Insert

150081666
A04-10095-131: RNCC: 5 | RNVC: 2
A04-10095-131: RNCC: 5 | RNVC: 9
A04-10095-131: RNCC: 5 | RNVC: 9

10 May 1981

5340-15-195-7660
Access Cover

151957660
895-3101-10-141: RNCC: 3 | RNVC: 2

9 May 2011

5340-15-180-1325
Shelf Bracket

151801325
DMP-130: RNCC: 3 | RNVC: 2

28 Jan 2008

5340-15-187-3624
Self-Locking Insert

151873624
701/00019: RNCC: 3 | RNVC: 2
(241)AD751701/00019: RNCC: 5 | RNVC: 2
701/00019: RNCC: 5 | RNVC: 2

19 Mar 2009

5340-15-178-5845
Access Cover

151785845
391-1637/01: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-121-0613
Screw Thread Insert

151210613
M3(X0.5)X1.5D: RNCC: 3 | RNVC: 2
210002531: RNCC: 5 | RNVC: 2

21 Sep 1995

5340-15-177-4357
Mounting Bracket

151774357
051414: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-116-4821
Angle Bracket

151164821
4868028: RNCC: 3 | RNVC: 2
(7001)5340151164821: RNCC: 5 | RNVC: 2

20 May 1993

5340-15-120-4517
Access Cover

151204517
142505204: RNCC: 3 | RNVC: 2

25 May 1995

5340-15-179-6856
Angle Bracket

151796856
0000098197849: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-193-6783
Control Rod

151936783
163104038: RNCC: 3 | RNVC: 2
(241)A0199163104038: RNCC: 5 | RNVC: 2

28 Jun 2010

5340-15-199-7211
Access Cover

151997211
4895155: RNCC: 3 | RNVC: 2
(241)A42494895155: RNCC: 5 | RNVC: 2

18 May 2005

5340-15-002-3068
Mounting Plate

150023068
504376205: RNCC: 3 | RNVC: 2

5 Aug 2013

5340-15-116-4751
Butt Hinge Leaf

151164751
60151128: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-003-3761
Rim Lock

150033761
64957: RNCC: 3 | RNVC: 2

5 Nov 2013

5340-15-004-1804
Angle Bracket

150041804
945008: RNCC: 3 | RNVC: 2

19 Apr 1978

5340-15-120-1393
Retaining Strap

151201393
489854: RNCC: 3 | RNVC: 2
D0489854: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-15-007-7153
Angle Bracket

150077153
50041040: RNCC: 5 | RNVC: 2
50041040: RNCC: 5 | RNVC: 2
50041040: RNCC: 5 | RNVC: 9

15 Jul 1980

5340-15-064-8471
Retaining Strap

150648471
000202987700: RNCC: 5 | RNVC: 2
000202987700: RNCC: 5 | RNVC: 9

16 Nov 1984

5340-15-122-2561
Mounting Plate

151222561
800024840: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-117-4872
Rod End Connector

151174872
66647-101B00: RNCC: 3 | RNVC: 2

27 Oct 1993

5340-15-071-4796
Rim Lock

150714796
1971-020MRSNSP0TT0NECR0MAT0: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-062-2739
Mending Plate

150622739
1141-31-151: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-009-8285
Leather Strap

150098285
A20X225 DIN 6409: RNCC: 3 | RNVC: 2

7 Feb 1994

5340-15-178-5317
Crank Handle

151785317
R516-29: RNCC: 3 | RNVC: 2
R516-29: RNCC: 5 | RNVC: 9

1 Jul 2005

5340-15-119-4179
Mending Plate

151194179
142507025: RNCC: 3 | RNVC: 2

26 Jul 1994

5340-15-120-4584
Angle Bracket

151204584
145371-1: RNCC: 3 | RNVC: 2

29 May 1995

5340-15-203-6770
Mounting Bracket

152036770
5801335734: RNCC: 3 | RNVC: 2

24 Jun 2011

5340-15-073-5222
Rim Lock

150735222
1447BISPARTA: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-114-0568
Retaining Strap

151140568
090.51: RNCC: 3 | RNVC: 2
SWR 0008: RNCC: 5 | RNVC: 2

17 Apr 1992

5340-15-153-5231
Access Cover

151535231
142064801: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-150-2369
Retaining Strap

151502369
A0123800: RNCC: 3 | RNVC: 2

27 Aug 1999

5340-15-109-5999
Angle Bracket

151095999
60113363: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-116-4755
Butt Hinge Leaf

151164755
60151182: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-051-2810
Mending Plate

150512810
4013915: RNCC: 3 | RNVC: 2
4013915: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-119-4032
Angle Bracket

151194032
60170291: RNCC: 3 | RNVC: 2

25 Jul 1994

5340-15-152-7840
Tubular Fairlead

151527840
P110601: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-008-1667
Screw Thread Insert

150081667
A04-10095-133: RNCC: 5 | RNVC: 2
A04-10095-133: RNCC: 5 | RNVC: 9
A04-10095-133: RNCC: 5 | RNVC: 9

10 May 1981

5340-15-153-9462
Bridge Clamp

151539462
142061413: RNCC: 2 | RNVC: 3

12 Mar 2001

5340-15-166-5098
Retaining Ring

151665098
412322: RNCC: 1 | RNVC: 2
412322: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-112-8759
Retaining Strap

151128759
60156642: RNCC: 3 | RNVC: 2

16 Sep 1989

5340-15-059-5475
Retaining Strap

150595475
04341-101: RNCC: 3 | RNVC: 2

19 Mar 1976

5340-15-057-7867
Access Door Hinge

150577867
1971-69-14: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-074-4002
Retaining Strap

150744002
7UNI2138: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-008-1731
Screw Thread Insert

150081731
A04-10095-071: RNCC: 5 | RNVC: 2
A04-10095-071: RNCC: 5 | RNVC: 9
A04-10095-071: RNCC: 5 | RNVC: 9

30 May 1981

5340-15-151-4948
Retaining Band

151514948
14567680: RNCC: 3 | RNVC: 2

31 May 2000

5340-15-112-3494
Angle Bracket

151123494
60148538: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-120-3533
Loop Clamp

151203533
17315790: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-073-8923
Flush Lock

150738923
13B65X100-3LEVE: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-152-5265
Expansion Plug

151525265
60188031: RNCC: 3 | RNVC: 2

20 Sep 2000

5340-15-063-6551
Angle Bracket

150636551
P-882655-001: RNCC: 3 | RNVC: 2
P882655-001: RNCC: 5 | RNVC: 2

20 Apr 1983

5340-15-194-3821
Mounting Bracket

151943821
109-B700-35-185: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-15-073-5623
Flush Lock

150735623
19880-050: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-120-3570
Access Cover

151203570
60175957: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-159-9621
Handle Grip

151599621
122513109: RNCC: 3 | RNVC: 2

19 Apr 2004

5340-15-189-3909
Mounting Plate

151893909
1Q 705444: RNCC: 3 | RNVC: 2

18 Feb 2010

5340-15-162-4247
Mounting Bracket

151624247
A151116-1: RNCC: 3 | RNVC: 2

25 Sep 2001

5340-15-142-4320
Access Cover

151424320
4310004: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-200-2960
Access Cover

152002960
02731A202330: RNCC: 3 | RNVC: 2

29 Nov 2005

5340-15-118-9489
Mounting Bracket

151189489
75204230: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-118-3840
Loop Clamp

151183840
60160960: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-063-2781
Angle Bracket

150632781
60108332: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-153-7755
Access Cover

151537755
02731A103000: RNCC: 5 | RNVC: 2
T0064522: RNCC: 5 | RNVC: 2
02731A103000: RNCC: 5 | RNVC: 9

28 Feb 2001

5340-15-058-4010
Retaining Strap

150584010
553816153000: RNCC: 2 | RNVC: 3
538-16-1530: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-005-1090
Handle Grip

150051090
1137-20-113: RNCC: 3 | RNVC: 2

10 Apr 1978

5340-15-109-3831
Mending Plate

151093831
5137-293-16: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-112-6162
Detent Plunger

151126162
1136.19.154: RNCC: 3 | RNVC: 2
I211M/25: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-155-0494
Angle Bracket

151550494
J92440227-001: RNCC: 3 | RNVC: 2

9 Jan 2002

5340-15-120-4472
Mending Plate

151204472
142501200: RNCC: 3 | RNVC: 2

25 May 1995

5340-15-055-5502
Handle Grip

150555502
R62013P0S47: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-051-3715
Retaining Ring

150513715
9913180: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-203-4437
Mounting Bracket

152034437
MX-WH-SECUREFLEX: RNCC: 3 | RNVC: 2
(241)AG590MX-WH-SECUREFLEX: RNCC: 5 | RNVC: 2

30 Jan 2008

5340-15-065-4582
Loop Clamp

150654582
ABA-000: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-15-193-2240
Hand Crank

151932240
74-208237A: RNCC: 3 | RNVC: 2
(241)A331474-208237A: RNCC: 5 | RNVC: 2

21 Apr 2010

5340-15-120-5431
Access Cover

151205431
79038223: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-15-109-1212
Rod End Clevis

151091212
60115157: RNCC: 3 | RNVC: 2

30 Apr 1988

5340-15-065-7102
Angle Bracket

150657102
109-0851-78-164: RNCC: 3 | RNVC: 2

26 Jun 1985

5340-15-073-5267
Flush Lock

150735267
75-70X53: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-153-3918
Angle Bracket

151533918
5137-321-13: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-121-4616
Butt Hinge Leaf

151214616
213A7244-001: RNCC: 3 | RNVC: 2

21 Dec 1995

5340-15-061-2726
Angle Bracket

150612726
CTT84-15: RNCC: 3 | RNVC: 2

18 Feb 1977

5340-15-179-7010
Angle Bracket

151797010
0000500411166: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-118-4030
Angle Bracket

151184030
60167041: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-119-1082
Retaining Strap

151191082
73070823: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-168-9478
Coat And Hat Hook

151689478
F72001987: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-179-9576
Mounting Plate

151799576
0000500401262: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-001-8069
Mounting Plate

150018069
5949790556: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-105-8962
Spring Tension Clip

151058962
813729: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-119-1477
Angle Bracket

151191477
73125924: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-179-7948
Metal Grille

151797948
D1404685: RNCC: 3 | RNVC: 2

3 Aug 2007

5340-15-068-9699
Lock-Release Lever

150689699
AL.100-02Q-112: RNCC: 3 | RNVC: 2
AL 100-02Q-112: RNCC: 5 | RNVC: 2

9 Jun 1986

5340-15-178-3722
Access Cover

151783722
362222000: RNCC: 3 | RNVC: 2

29 Apr 2005

5340-15-107-5112
Plug Button

151075112
14507687: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-203-2766
Retaining Band

152032766
1842032: RNCC: 3 | RNVC: 2
(241)AD7511842032: RNCC: 5 | RNVC: 2
1842032: RNCC: 5 | RNVC: 2

18 Dec 2007

5340-15-133-6239
Handle Grip

151336239
4552232: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-203-3034
Retaining Band

152033034
33720: RNCC: 3 | RNVC: 2

9 Jan 2008

5340-15-187-3109
Retaining Band

151873109
UZ191: RNCC: 3 | RNVC: 2
(241)A9410UZ191: RNCC: 5 | RNVC: 2

11 Mar 2009

5340-15-169-8658
Coat And Hat Hook

151698658
F72019338: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-057-8062
Screw Thread Insert

150578062
8X125CN20: RNCC: 3 | RNVC: 2
2140-06-323: RNCC: 5 | RNVC: 2
214006323: RNCC: 5 | RNVC: 2

31 Dec 1975

5340-15-061-4769
Clip Retainer Plate

150614769
P135236-002: RNCC: 3 | RNVC: 2

26 Jan 1978

5340-15-001-8286
Mounting Bracket

150018286
5949784189: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-181-0091
Permanent Magnet

151810091
2727-302: RNCC: 3 | RNVC: 2

22 Sep 2008

5340-15-001-8165
Mounting Bracket

150018165
5949788676: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-127-7163
Handle Grip

151277163
5113-8: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-178-7800
Mounting Bracket

151787800
048033: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-001-7796
Access Cover

150017796
8053133: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-121-7956
Mending Plate

151217956
142519111: RNCC: 3 | RNVC: 2

21 Feb 1996

5340-15-007-6974
Mending Plate

150076974
1141-39-936: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-109-3895
Mending Plate

151093895
5137-014-21: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-102-1038
Webbing Strap

151021038
193-0484/31: RNCC: 3 | RNVC: 2

22 Jun 1986

5340-15-109-4835
Vent Plug

151094835
1P 278626: RNCC: 3 | RNVC: 2
1P 278626: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-109-0190
Handle Grip

151090190
60102679: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-123-1006
Angle Bracket

151231006
8572964: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-107-2857
Retaining Strap

151072857
70901: RNCC: 3 | RNVC: 2

2 Nov 1993

5340-15-198-8839
Angle Bracket

151988839
N717G1089101: RNCC: 3 | RNVC: 2
(241)A0126N717G1089101: RNCC: 5 | RNVC: 2

24 Nov 2004

5340-15-158-5911
Clamping Catch

151585911
122603696: RNCC: 3 | RNVC: 2

9 Mar 2004

5340-15-009-8858
Mending Plate

150098858
1236-31-900: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-105-2166
Mending Plate

151052166
13905: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-116-1086
Plain Solid Disk

151161086
DPR24072/1-38: RNCC: 3 | RNVC: 2

11 Oct 1993

5340-15-113-0960
Loop Clamp

151130960
31913-D10/42: RNCC: 3 | RNVC: 2

11 Oct 1994

5340-15-007-3938
Retaining Ring

150073938
0-34087: RNCC: 3 | RNVC: 2
1PA39630-34087: RNCC: 5 | RNVC: 2

10 Apr 1979

5340-15-009-0587
Retaining Strap

150090587
1382955: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-150-0879
Loop Clamp

151500879
016010027: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-009-7133
Plain Solid Disk

150097133
1376-62-359: RNCC: 3 | RNVC: 2
137662359: RNCC: 5 | RNVC: 2

1 Jun 1987

5340-15-089-5825
Butt Hinge

150895825
16936-125: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-118-4458
Mending Plate

151184458
60149011: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-188-7653
Drift Bolt

151887653
MOR3536360CH: RNCC: 3 | RNVC: 2
(241)AG622MOR3536360CH: RNCC: 5 | RNVC: 2

13 Nov 2009

5340-15-198-4979
Friction Catch

151984979
LJCA50052: RNCC: 3 | RNVC: 2
(241)A0930LJCA50052: RNCC: 5 | RNVC: 2

7 Oct 2004

5340-15-149-1547
Lock-Release Lever

151491547
48530035: RNCC: 3 | RNVC: 2

14 Jan 1999

5340-15-118-9924
Expansion Plug

151189924
75208119: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-003-9075
Mounting Plate

150039075
182741041: RNCC: 3 | RNVC: 2
(241)A0199182741041: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-007-9727
Screw Thread Insert

150079727
1-42029-85: RNCC: 3 | RNVC: 2
1-42029-85: RNCC: 5 | RNVC: 9

22 Sep 1979

5340-15-005-4464
Retaining Band

150054464
92888-001: RNCC: 3 | RNVC: 2

1 Mar 1979

5340-15-153-2588
Rim Latch

151532588
122606442: RNCC: 2 | RNVC: 3

12 Dec 2000

5340-15-154-1006
Angle Bracket

151541006
0-161899: RNCC: 3 | RNVC: 2
(241)A39630-161899: RNCC: 5 | RNVC: 2
1PA39630-161899: RNCC: 5 | RNVC: 2

20 Mar 2001

5340-15-153-9455
Retaining Strap

151539455
142061366: RNCC: 2 | RNVC: 3

12 Mar 2001

5340-15-178-5592
Access Cover

151785592
34 0031 0002: RNCC: 3 | RNVC: 2
5010579762: RNCC: 5 | RNVC: 2

17 Aug 2005

5340-15-153-5249
Access Cover

151535249
190532800: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-129-1457
Handle Grip

151291457
HAW48: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-204-5112
Mounting Plate

152045112
26HJ04143043S01-801/1106: RNCC: 3 | RNVC: 2
(241)A001926HJ04143043S01-801/11: RNCC: 5 | RNVC: 2

8 Nov 2011

5340-15-056-9887
Loop Clamp

150569887
67171-01-004: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-110-0307
Retaining Strap

151100307
22826-001A01: RNCC: 3 | RNVC: 2
22826-001A1: RNCC: 5 | RNVC: 2

15 Mar 1990

5340-15-175-1287
T Bracket

151751287
S61-0920-13-130: RNCC: 3 | RNVC: 2

16 Jan 2004

5340-15-007-8977
Expansion Plug

150078977
1-42827-70: RNCC: 3 | RNVC: 2
0-48281: RNCC: 5 | RNVC: 2
14282770: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-062-1925
Angle Bracket

150621925
P-892777-003: RNCC: 3 | RNVC: 2
P892777-003: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-202-8615
Mounting Bracket

152028615
11336: RNCC: 3 | RNVC: 2
HP.32105: RNCC: 3 | RNVC: 2
(241)A0544HP.32105: RNCC: 5 | RNVC: 2

26 Aug 2007

5340-15-204-3490
Clamping Catch

152043490
25150075: RNCC: 3 | RNVC: 2
(241)ACA6425150075: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-199-4359
Hand Crank

151994359
489661: RNCC: 3 | RNVC: 2
(241)A0866489661: RNCC: 5 | RNVC: 2

4 Apr 2005

5340-15-109-7117
Retaining Strap

151097117
60134547: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-100-8747
Screw Thread Insert

151008747
224233P1: RNCC: 3 | RNVC: 2
224233P1: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-109-8122
Retaining Band

151098122
60105655: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-065-7278
Access Door Hinge

150657278
109-0363-02-3: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-15-154-1932
Angle Bracket

151541932
0-110586: RNCC: 3 | RNVC: 2
(241)A39630-110586: RNCC: 5 | RNVC: 2
1PA39630-110586: RNCC: 5 | RNVC: 2

28 Mar 2001

5340-15-188-4993
Mounting Plate

151884993
XBMM-06/A: RNCC: 3 | RNVC: 2

24 Sep 2009

5340-15-008-1859
Retaining Band

150081859
60114829: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-118-6975
Mounting Bracket

151186975
73128390: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-181-1762
Loop Clamp

151811762
179040101: RNCC: 3 | RNVC: 2
(241)A0199179040101: RNCC: 5 | RNVC: 2

5 Nov 2008

5340-15-002-2824
Loop Clamp

150022824
18181390: RNCC: 3 | RNVC: 2

5 Aug 2013

5340-15-020-1815
Angle Bracket

150201815
01-231H116S: RNCC: 3 | RNVC: 2
55.25.046.A: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-118-3418
Loop Clamp

151183418
60146224: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-107-2539
Mending Plate

151072539
5054-03: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-153-5232
Access Cover

151535232
142065015: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-118-4501
Angle Bracket

151184501
60150666: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-153-2559
Rod End Clevis

151532559
122606166: RNCC: 2 | RNVC: 3

12 Dec 2000

5340-15-153-7757
Access Cover

151537757
T0064450: RNCC: 5 | RNVC: 2
02731A113140: RNCC: 5 | RNVC: 2
02731A113140: RNCC: 5 | RNVC: 9

28 Feb 2001

5340-15-199-6660
Screw Thread Insert

151996660
17849870: RNCC: 3 | RNVC: 2
(241)A424917849870: RNCC: 5 | RNVC: 2

17 May 2005

5340-15-148-5846
Butt Hinge

151485846
129-0370-17-115: RNCC: 3 | RNVC: 2

31 Aug 1998

5340-15-065-8591
Loop Clamp

150658591
65.15.011.0: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-179-6702
Mounting Bracket

151796702
41015863: RNCC: 3 | RNVC: 2
(241)A424941015863: RNCC: 5 | RNVC: 2

7 Jun 2007

5340-15-118-7293
Retaining Strap

151187293
73127638: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-193-2936
Threaded Rod End

151932936
523C03201-001: RNCC: 3 | RNVC: 2

27 Apr 2010

5340-15-108-7093
Retaining Band

151087093
10292490: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-148-4056
Angle Bracket

151484056
129-0600-59-101: RNCC: 3 | RNVC: 2

10 Aug 1998

5340-15-089-5813
Butt Hinge

150895813
16930-150: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-006-4169
Handle Grip

150064169
74611-24: RNCC: 3 | RNVC: 2

3 Dec 1979

5340-15-205-2472
Retaining Strap

152052472
109-3131-03-115: RNCC: 3 | RNVC: 2

29 Feb 2012

5340-15-118-4581
Loop Clamp

151184581
60149501: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-002-8039
Snap Hook

150028039
890.0013.0: RNCC: 3 | RNVC: 2

3 Oct 2013

5340-15-062-9179
Retaining Strap

150629179
0-100283: RNCC: 3 | RNVC: 2

9 Jul 1981

5340-15-153-2564
Stand Base

151532564
122606215: RNCC: 2 | RNVC: 3

12 Dec 2000

5340-15-007-6986
Mending Plate

150076986
1141-39-165: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-107-0747
Bridge Clamp

151070747
F46-03: RNCC: 3 | RNVC: 2
0303255: RNCC: 5 | RNVC: 2

20 Sep 1991

5340-15-108-3118
Angle Bracket

151083118
60121270: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-109-7416
Angle Bracket

151097416
60132778: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-170-7232
Mounting Bracket

151707232
8545.507: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-001-7893
Mounting Bracket

150017893
5949790816: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-187-2068
Mounting Bracket

151872068
SC 100 692: RNCC: 3 | RNVC: 2
(241)A3980SC100692: RNCC: 5 | RNVC: 2

24 Feb 2009

5340-15-202-8611
T Plate

152028611
BK.30206/1: RNCC: 3 | RNVC: 2
10263_1: RNCC: 3 | RNVC: 2
(241)A0544BK.30206/1: RNCC: 5 | RNVC: 2

26 Aug 2007

5340-15-003-1316
Mounting Bracket

150031316
5949788804: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-187-2005
Mounting Bracket

151872005
SC 100 632: RNCC: 3 | RNVC: 2
(241)A3980SC100632: RNCC: 5 | RNVC: 2

24 Feb 2009

5340-15-112-9366
Loop Clamp

151129366
31610001A: RNCC: 3 | RNVC: 2

11 Apr 1994

5340-15-111-7971
Strap Hinge

151117971
32123/1: RNCC: 3 | RNVC: 2

1 Jul 1990

5340-15-061-2502
Bow Handle

150612502
22039-101: RNCC: 3 | RNVC: 2

1 Sep 1977

5340-15-113-9690
Bow Handle

151139690
252A3005-001: RNCC: 3 | RNVC: 2

31 Mar 1992

5340-15-066-4630
Angle Bracket

150664630
6-43075-101-72664A1: RNCC: 3 | RNVC: 2

3 Mar 1986

5340-15-112-8090
Vent Plug

151128090
487309: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-158-5222
Retaining Band

151585222
251A1080-001: RNCC: 3 | RNVC: 2

1 Mar 2004

5340-15-120-3278
Mending Plate

151203278
2421-004: RNCC: 3 | RNVC: 2
8196891: RNCC: 5 | RNVC: 2
2421-004: RNCC: 5 | RNVC: 9

30 Mar 1995

5340-15-004-1525
Expansion Plug

150041525
1/01587/01: RNCC: 3 | RNVC: 2
1/01587/01: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-207-8574
Poker

152078574
FP 25: RNCC: 3 | RNVC: 2

20 Nov 2012

Load More Results