What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 2 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 2 of 72

5340-15-001-7867
Mounting Bracket

150017867
500408347: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-118-4431
Angle Bracket

151184431
60154208: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-187-4696
Cushioning Pad

151874696
3002527: RNCC: 3 | RNVC: 2

2 Apr 2009

5340-15-179-1761
T Bracket

151791761
RS 417 870 A: RNCC: 3 | RNVC: 2

13 Jun 2006

5340-15-118-9126
Angle Bracket

151189126
70639670: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-109-1838
Angle Bracket

151091838
60141102: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-051-2798
Retaining Strap

150512798
4553834: RNCC: 3 | RNVC: 2
4553834: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-066-0395
Retaining Strap

150660395
1127-36-296: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-102-0794
Butt Hinge Leaf

151020794
213A7166-001: RNCC: 3 | RNVC: 2

29 Jul 1988

5340-15-193-3532
Door Handle

151933532
RID98/MS2: RNCC: 3 | RNVC: 2

7 May 2010

5340-15-120-8735
Access Cover

151208735
109-0312-79-101: RNCC: 3 | RNVC: 2

4 Sep 1995

5340-15-187-6752
Hand Crank

151876752
74-207678A: RNCC: 3 | RNVC: 2
(241)A331474-207678A: RNCC: 5 | RNVC: 2

22 Apr 2009

5340-15-102-5873
Angle Bracket

151025873
IT - 10956492: RNCC: 3 | RNVC: 2

27 Oct 1988

5340-15-179-1635
T Bracket

151791635
RS 306 241 A: RNCC: 3 | RNVC: 2

13 Jun 2006

5340-15-198-4994
Loop Clamp

151984994
P5DO80003: RNCC: 3 | RNVC: 2
(241)A0930P5DO80003: RNCC: 5 | RNVC: 2

7 Oct 2004

5340-15-002-6582
Mounting Bracket

150026582
62564336: RNCC: 3 | RNVC: 2

17 Sep 2013

5340-15-156-9691
Mounting Bracket

151569691
RAD-0231/01: RNCC: 3 | RNVC: 2
(241)A0069RAD-0231/01: RNCC: 5 | RNVC: 2

25 Mar 2003

5340-15-113-7313
Mounting Plate

151137313
1376-16-279: RNCC: 3 | RNVC: 2
137616279: RNCC: 5 | RNVC: 2

13 Feb 1992

5340-15-194-3570
Block Clamp

151943570
109-0518-80-101: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-15-005-4577
Mending Plate

150054577
1376-31-583: RNCC: 3 | RNVC: 2
137631583: RNCC: 5 | RNVC: 2

6 Jul 2000

5340-15-060-2895
Screw Thread Insert

150602895
2106-06-323: RNCC: 3 | RNVC: 2
210606323: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-116-7911
Plain Solid Disk

151167911
DPR24150/2-77: RNCC: 3 | RNVC: 2

18 Nov 1993

5340-15-154-1931
Angle Bracket

151541931
0-110585: RNCC: 3 | RNVC: 2
(241)A39630-110585: RNCC: 5 | RNVC: 2
1PA39630-110585: RNCC: 5 | RNVC: 2

28 Mar 2001

5340-15-122-1172
Rod End Clevis

151221172
129-0211-30-105: RNCC: 3 | RNVC: 2

14 May 1996

5340-15-057-4388
Retaining Band

150574388
204-9000-20-1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-206-3506
Mounting Bracket

152063506
5004 00906: RNCC: 3 | RNVC: 2

4 Jun 2012

5340-15-179-6824
Mounting Bracket

151796824
0000098199816: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-122-2121
Loop Clamp

151222121
800042349: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-151-4759
Angle Bracket

151514759
0-150661: RNCC: 3 | RNVC: 2
1PA39630-150661: RNCC: 5 | RNVC: 2
(241)A39630-150661: RNCC: 5 | RNVC: 2

30 May 2000

5340-15-151-2192
Loop Clamp

151512192
00085593: RNCC: 3 | RNVC: 2

28 Apr 2000

5340-15-062-9230
Loop Clamp

150629230
0-101422: RNCC: 3 | RNVC: 2

9 Jul 1981

5340-15-002-8207
Mounting Bracket

150028207
5801329338: RNCC: 3 | RNVC: 2

3 Oct 2013

5340-15-007-2222
Retaining Strap

150072222
1398217: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-202-4487
Luggage Handle

152024487
1600/3: RNCC: 3 | RNVC: 2
(241)A52001600/3: RNCC: 5 | RNVC: 2

25 Mar 2007

5340-15-060-8594
Bow Handle

150608594
250-001-511: RNCC: 3 | RNVC: 2
A81021-45-22: RNCC: 5 | RNVC: 2
A81021-45-22: RNCC: 5 | RNVC: 2

29 Jun 1977

5340-15-001-7928
Mounting Bracket

150017928
500422220: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-120-2258
Access Cover

151202258
60154615: RNCC: 3 | RNVC: 2

27 Feb 1995

5340-15-108-5975
Loop Clamp

151085975
12173090: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-151-4194
Loop Clamp

151514194
0-102397: RNCC: 3 | RNVC: 2

23 May 2000

5340-15-207-3619
Casement Fastener

152073619
0.9231.193.3: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-15-197-5192
Magnetic Base

151975192
PN UAS 00035306: RNCC: 3 | RNVC: 2
6140F76031023: RNCC: 5 | RNVC: 9

8 Apr 2004

5340-15-153-5185
Expansion Plug

151535185
142016294: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-001-7287
Retaining Band

150017287
151-13119: RNCC: 3 | RNVC: 2

15 Jul 2013

5340-15-103-2692
Angle Bracket

151032692
5124-217-12: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-004-4563
Spring Tension Clip

150044563
23233-101: RNCC: 3 | RNVC: 2

10 Jul 1978

5340-15-118-3125
Loop Clamp

151183125
MC404.20C: RNCC: 3 | RNVC: 2

22 Sep 1994

5340-15-060-2763
Hand Crank

150602763
4-02835: RNCC: 3 | RNVC: 2

9 Feb 1977

5340-15-118-2647
Loop Clamp

151182647
D0485438: RNCC: 3 | RNVC: 2

11 Apr 1995

5340-15-177-4331
Bridge Clamp

151774331
051116: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-160-4519
Angle Bracket

151604519
F720105781: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-156-8801
Loop Clamp

151568801
1470-264 5453: RNCC: 3 | RNVC: 2

10 Mar 2003

5340-15-103-3847
Loop Clamp

151033847
LOPING MOD.2: RNCC: 3 | RNVC: 2

10 Apr 1988

5340-15-109-2708
Retaining Strap

151092708
0-105909: RNCC: 3 | RNVC: 2

8 Mar 1988

5340-15-158-3916
Expansion Plug

151583916
D0180032A: RNCC: 3 | RNVC: 2

25 Jan 2004

5340-15-186-9144
Mounting Bracket

151869144
875361: RNCC: 3 | RNVC: 2
875361: RNCC: 5 | RNVC: 9

5 Jan 2009

5340-15-057-8991
Bow Handle

150578991
L309B1: RNCC: 5 | RNVC: 2
L309B1: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-061-2656
Angle Bracket

150612656
018200101700: RNCC: 5 | RNVC: 2
018200101700: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-120-4497
Retaining Strap

151204497
142502482: RNCC: 3 | RNVC: 2

25 May 1995

5340-15-205-2588
Retaining Strap

152052588
504277980: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-119-0164
Angle Bracket

151190164
70646763: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-115-5747
Angle Bracket

151155747
4885310: RNCC: 3 | RNVC: 2

5 Dec 1992

5340-15-179-9878
Retaining Band

151799878
313509F91: RNCC: 3 | RNVC: 2

16 Nov 2007

5340-15-063-3193
Retaining Strap

150633193
60104855: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-179-8232
Pipe Hanger

151798232
AST32: RNCC: 3 | RNVC: 2
CAE01805: RNCC: 5 | RNVC: 2

3 Aug 2007

5340-15-193-7878
Caster Wheel

151937878
CR2881: RNCC: 3 | RNVC: 2

13 Jul 2010

5340-15-059-6807
Rod End Clevis

150596807
04862-101A1: RNCC: 3 | RNVC: 2
04862-101A1: RNCC: 5 | RNVC: 2

21 Apr 1976

5340-15-121-7103
Screw Thread Insert

151217103
A0410095214: RNCC: 5 | RNVC: 2
A0410095214: RNCC: 5 | RNVC: 9
A0410095214: RNCC: 5 | RNVC: 9

6 Feb 1996

5340-15-195-8670
Mounting Bracket

151958670
6422001370: RNCC: 3 | RNVC: 2
(241)AJ6116422001370: RNCC: 5 | RNVC: 2

23 May 2011

5340-15-067-6860
Angle Bracket

150676860
516925: RNCC: 2 | RNVC: 2
516925: RNCC: 5 | RNVC: 9

1 Apr 1998

5340-15-100-8092
Butt Hinge Leaf

151008092
109-0640-50-138: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-15-123-4262
Angle Bracket

151234262
7602988: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-116-4899
Bow Handle

151164899
60149388: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-007-6286
Angle Bracket

150076286
P-135578-009: RNCC: 3 | RNVC: 2
P135578-009: RNCC: 5 | RNVC: 2

12 Mar 1980

5340-15-107-2538
Mending Plate

151072538
5054-04: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-051-3163
Loop Clamp

150513163
1-04181-05: RNCC: 3 | RNVC: 2
10418105: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-157-5016
Protection Bellows

151575016
555539318000: RNCC: 2 | RNVC: 2
5-555-39-3180-00: RNCC: 3 | RNVC: 2

8 Sep 2003

5340-15-059-3591
Retaining Strap

150593591
1127-40-303: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-197-8385
Roller Holder

151978385
1195/A.3.22: RNCC: 3 | RNVC: 2
(241)A39171195/A.3.22: RNCC: 5 | RNVC: 2

17 May 2004

5340-15-157-6475
Rod End Clevis

151576475
20610-101: RNCC: 3 | RNVC: 2

12 Oct 2003

5340-15-118-0929
Loop Clamp

151180929
D0488613: RNCC: 3 | RNVC: 2

10 Apr 1995

5340-15-009-1402
Loop Clamp

150091402
1-04409-90: RNCC: 3 | RNVC: 2
10440990: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-149-5883
Retaining Clip

151495883
NOR1-010-11-16B: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-198-9123
Screw Thread Insert

151989123
26HJ04143051S01-071/N: RNCC: 3 | RNVC: 2

25 Nov 2004

5340-15-154-1994
Angle Bracket

151541994
0-168010: RNCC: 3 | RNVC: 2
(241)A39630-168010: RNCC: 5 | RNVC: 2
1PA39630-168010: RNCC: 5 | RNVC: 2

28 Mar 2001

5340-15-007-5006
Lock-Release Lever

150075006
1139-02-111: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-060-5694
Mending Plate

150605694
22290-101: RNCC: 3 | RNVC: 2

2 Jun 1977

5340-15-051-3461
Rod End Connector

150513461
2-3193-301-43465: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-009-3597
Mending Plate

150093597
1376-19-349: RNCC: 3 | RNVC: 2
137619349: RNCC: 5 | RNVC: 2

21 Jul 1999

5340-15-193-8418
Threaded Rod End

151938418
109-0134-06-113: RNCC: 3 | RNVC: 2
(241)A0126109-0134-06-113: RNCC: 5 | RNVC: 2

21 Jul 2010

5340-15-145-0059
Butt Hinge Leaf

151450059
212-7600-44-7: RNCC: 3 | RNVC: 2

8 Oct 1997

5340-15-089-5826
Butt Hinge

150895826
16936-100: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-147-5842
Retaining Strap

151475842
CU1001R1PT1-6-3X1-12: RNCC: 3 | RNVC: 2
CU1001R1PT1-6-3X1-12: RNCC: 5 | RNVC: 9

30 Dec 1997

5340-15-062-1931
Angle Bracket

150621931
P-892781-001: RNCC: 3 | RNVC: 2
P892781-001: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-100-1966
Spring Holder

151001966
88331-30: RNCC: 3 | RNVC: 2

30 Sep 1985

5340-15-114-0946
Access Cover

151140946
CE628-40-03: RNCC: 3 | RNVC: 2

30 Nov 1993

5340-15-195-4224
Mounting Bracket

151954224
PLB129M: RNCC: 3 | RNVC: 2
(241)AH916PLB129M: RNCC: 5 | RNVC: 2

22 Mar 2011

5340-15-065-7289
Retaining Band

150657289
109-0617-05-1: RNCC: 3 | RNVC: 2

16 Dec 1984

5340-15-179-6947
Mounting Bracket

151796947
0000500413681: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-152-2492
T Plate

151522492
5AY PSAC 008: RNCC: 3 | RNVC: 2

17 Aug 2000

5340-15-205-2727
Loop Clamp

152052727
SF260-14-759-05: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-155-0529
Angle Bracket

151550529
J92440120-001: RNCC: 3 | RNVC: 2

9 Jan 2002

5340-15-154-2046
Angle Bracket

151542046
0-168573: RNCC: 3 | RNVC: 2
(241)A39630-168573: RNCC: 5 | RNVC: 2
1PA39630-168573: RNCC: 5 | RNVC: 2

28 Mar 2001

5340-15-201-1930
Hook Handle

152011930
212-1300-17-17: RNCC: 3 | RNVC: 2
(241)A0126212-1300-17-17: RNCC: 5 | RNVC: 2

20 Jun 2006

5340-15-089-5818
Butt Hinge

150895818
16946-150: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-006-7531
Angle Bracket

150067531
25413.0000: RNCC: 5 | RNVC: 2
4-25413.0000//C: RNCC: 5 | RNVC: 2
4-25413C: RNCC: 5 | RNVC: 2
25413.0000: RNCC: 5 | RNVC: 9
4-25413.0000//C: RNCC: 5 | RNVC: 9
4-25413C: RNCC: 5 | RNVC: 9

26 Oct 1979

5340-15-108-1664
Bridge Clamp

151081664
1576-18-228: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-111-3447
Rod End Clevis

151113447
109-0110-28-107: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-15-119-6345
Angle Bracket

151196345
60144207: RNCC: 3 | RNVC: 2

3 Oct 1994

5340-15-113-1465
Rod End Clevis

151131465
311A2996-001: RNCC: 3 | RNVC: 2

7 Oct 1990

5340-15-008-0926
Handle Grip

150080926
TO-959: RNCC: 3 | RNVC: 2

30 Jun 1981

5340-15-206-5117
Retaining Strap

152065117
109-0717-92-141: RNCC: 3 | RNVC: 2

20 Jun 2012

5340-15-000-1914
Mounting Bracket

150001914
BK.30207.R: RNCC: 3 | RNVC: 2

8 Feb 2013

5340-15-180-1563
Mounting Bracket

151801563
8805048: RNCC: 3 | RNVC: 2

15 Feb 2008

5340-15-116-1474
Pawl Fastener

151161474
830333: RNCC: 3 | RNVC: 2

17 Mar 1993

5340-15-202-8823
Angle Bracket

152028823
A6122-94005-117: RNCC: 3 | RNVC: 2
(241)A0126A6122-94005-117: RNCC: 5 | RNVC: 2

13 Sep 2007

5340-15-119-0856
Loop Clamp

151190856
70928927: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-149-0917
Loop Clamp

151490917
8792363: RNCC: 3 | RNVC: 2

4 Aug 1999

5340-15-073-5213
Rim Lock Set

150735213
1447BISPART6: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-073-5273
Flush Lock

150735273
75-70X83: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-004-7796
Loop Clamp

150047796
0-33398: RNCC: 3 | RNVC: 2

7 Sep 1977

5340-15-163-3890
Loop Clamp

151633890
9478396: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-163-3623
Mounting Bracket

151633623
4771242: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-178-6293
Mounting Bracket

151786293
M7275: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-187-1523
Mounting Bracket

151871523
20080166: RNCC: 3 | RNVC: 2

19 Feb 2009

5340-15-193-5092
Mounting Bracket

151935092
0011064: RNCC: 3 | RNVC: 2
0011064: RNCC: 5 | RNVC: 2

25 May 2010

5340-15-112-3539
Strap Hinge

151123539
60157386: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-073-8916
Flush Lock

150738916
13B65X45-3LEVE: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-153-9073
Mounting Bracket

151539073
9536T8: RNCC: 3 | RNVC: 2
(241)A333400085368: RNCC: 4 | RNVC: 1
00085368: RNCC: 5 | RNVC: 2

9 Mar 2001

5340-15-001-5925
Mounting Bracket

150015925
42566671: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-064-5890
Loop Clamp

150645890
4644289: RNCC: 3 | RNVC: 2
(241)A31144644289: RNCC: 5 | RNVC: 2
4644289: RNCC: 5 | RNVC: 2

17 Nov 1983

5340-15-197-1759
Rim Lock Set

151971759
PN UAS 00033739: RNCC: 3 | RNVC: 2
5340F76029923: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-178-9966
T Bracket

151789966
RS 407 358: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-001-8246
Mounting Bracket

150018246
5949789323: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-207-3467
Loop Clamp

152073467
3630.004: RNCC: 3 | RNVC: 2

9 Oct 2012

5340-15-121-9198
Angle Bracket

151219198
93815519: RNCC: 3 | RNVC: 2

29 Mar 1996

5340-15-199-3597
Butt Hinge

151993597
40140-2: RNCC: 3 | RNVC: 2

7 Mar 2005

5340-15-001-8320
Mounting Bracket

150018320
5949785909: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-118-7100
Angle Bracket

151187100
73129435: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-189-2719
Mounting Plate

151892719
8051554: RNCC: 3 | RNVC: 2
0043374: RNCC: 5 | RNVC: 2

10 Feb 2010

5340-15-207-8609
Retaining Band

152078609
5801320505: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-221-1322
Handle Grip

152211322
735316072: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-179-6475
Angle Bracket

151796475
J53350610-004: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-005-0469
Loop Clamp

150050469
0-33492: RNCC: 3 | RNVC: 2

7 Sep 1978

5340-15-178-6071
Butt Hinge

151786071
551.19291: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-204-3002
Mounting Bracket

152043002
N635G1099101: RNCC: 3 | RNVC: 2
(241)A0126N635G1099101: RNCC: 5 | RNVC: 2

19 Oct 2011

5340-15-153-7163
Angle Bracket

151537163
142024204: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-145-0775
Loop Clamp

151450775
8168033: RNCC: 3 | RNVC: 2
(7001)5340151450775: RNCC: 5 | RNVC: 2

17 Apr 1997

5340-15-193-9964
Flush Catch

151939964
109-0325-38-203: RNCC: 3 | RNVC: 2

12 Aug 2010

5340-15-153-2654
Stand Base

151532654
122611912: RNCC: 2 | RNVC: 3

12 Dec 2000

5340-15-005-1737
Strap Hinge

150051737
1377977: RNCC: 3 | RNVC: 2
1377977: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-198-2806
Mending Plate

151982806
M783207: RNCC: 3 | RNVC: 2

14 Sep 2004

5340-15-205-4201
Retaining Strap

152054201
178905206: RNCC: 3 | RNVC: 2
(241)A0199178905206: RNCC: 5 | RNVC: 2

8 Mar 2012

5340-15-188-3166
Plug Button

151883166
0090801320: RNCC: 3 | RNVC: 2
0090801320: RNCC: 5 | RNVC: 2
0090801320: RNCC: 5 | RNVC: 2

2 Sep 2009

5340-15-120-2255
Access Cover

151202255
60154619: RNCC: 3 | RNVC: 2

27 Feb 1995

5340-15-060-4789
Hand Crank

150604789
1376-15-026: RNCC: 3 | RNVC: 2
137615026: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-122-5884
Mechanical Stop

151225884
74785F91: RNCC: 3 | RNVC: 2
74785F91: RNCC: 5 | RNVC: 2

27 May 1999

5340-15-179-7371
Spring Holder

151797371
98473050: RNCC: 3 | RNVC: 2
(241)A424998473050: RNCC: 5 | RNVC: 2

7 Jun 2007

5340-15-120-2259
Access Cover

151202259
60154616: RNCC: 3 | RNVC: 2

27 Feb 1995

5340-15-118-3846
Loop Clamp

151183846
60168853: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-120-2253
Access Cover

151202253
60155037: RNCC: 3 | RNVC: 2

27 Feb 1995

5340-15-188-2074
Handwheel

151882074
007108-00: RNCC: 3 | RNVC: 2

4 Aug 2009

5340-15-009-1391
Angle Bracket

150091391
1398333: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-118-3848
Loop Clamp

151183848
60162444: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-157-5184
Flush Catch

151575184
A185A040A096: RNCC: 3 | RNVC: 2

12 Sep 2003

5340-15-170-7205
Mounting Plate

151707205
6360.097: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-206-8128
Loop Clamp

152068128
ED0036302170-S: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-121-5397
Threaded Rod End

151215397
132511202: RNCC: 3 | RNVC: 2

15 Jan 1996

5340-15-205-4189
Retaining Strap

152054189
178904751: RNCC: 3 | RNVC: 2
(241)A0199178904751: RNCC: 5 | RNVC: 2

8 Mar 2012

5340-15-119-0106
Tubular Fairlead

151190106
70080617: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-129-7812
Handle Grip

151297812
4049003: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-120-2704
Plug Button

151202704
14592287: RNCC: 3 | RNVC: 2

9 Mar 1995

5340-15-103-7056
Expansion Plug

151037056
41770702A: RNCC: 3 | RNVC: 2

26 Nov 1987

5340-15-153-9718
Rod End Clevis

151539718
8109159: RNCC: 3 | RNVC: 2

13 Mar 2001

5340-15-186-9070
Mounting Bracket

151869070
147776: RNCC: 3 | RNVC: 2
0028949: RNCC: 5 | RNVC: 2

5 Jan 2009

5340-15-105-8974
Spring Tension Clip

151058974
9901103: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-119-6424
Loop Clamp

151196424
81741: RNCC: 3 | RNVC: 2
93191499: RNCC: 5 | RNVC: 2
81741: RNCC: 5 | RNVC: 9

10 Oct 1994

5340-15-145-1858
Expansion Plug

151451858
452.0070.0000: RNCC: 3 | RNVC: 2
8090763: RNCC: 5 | RNVC: 2
F300 0T 003 0998: RNCC: 6 | RNVC: 9

2 Jun 1997

5340-15-178-7492
Mounting Bracket

151787492
027146: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-108-6277
Retaining Strap

151086277
60136134: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-119-0746
Loop Clamp

151190746
70927154: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-042-6168
Handle Grip

150426168
9073-5: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-155-9734
Loop Clamp

151559734
EN4113F14H: RNCC: 2 | RNVC: 2

17 Oct 2002

5340-15-118-8573
Angle Bracket

151188573
241202178G: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-107-6932
Angle Bracket

151076932
74024089: RNCC: 3 | RNVC: 2

9 May 1985

5340-15-074-3977
Retaining Strap

150743977
6UNI2136CD: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-118-3621
Angle Bracket

151183621
60141075: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-157-9235
Loop Clamp

151579235
0-164587: RNCC: 3 | RNVC: 2
(241)A39630-164587: RNCC: 5 | RNVC: 2
1PA39630-164587: RNCC: 5 | RNVC: 2

25 Nov 2003

5340-15-111-3806
Butt Hinge Leaf

151113806
113A6032-402: RNCC: 3 | RNVC: 2

7 Sep 1990

5340-15-117-6371
Mending Plate

151176371
142507327: RNCC: 3 | RNVC: 2

4 Jan 1994

5340-15-007-3171
Access Cover

150073171
7984211: RNCC: 3 | RNVC: 2

7 Jan 2014

5340-15-065-2626
Bow Handle

150652626
79020227: RNCC: 3 | RNVC: 2

24 Jul 1983

5340-15-109-4615
Rod End Clevis

151094615
1S 530601: RNCC: 3 | RNVC: 2
1S 530601: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-155-5304
Retaining Band

151555304
(241)A12123616.018: RNCC: 3 | RNVC: 2
3616.018: RNCC: 3 | RNVC: 2

8 Apr 2002

5340-15-160-8233
Coat And Hat Hook

151608233
F720005951: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-180-0766
Angle Bracket

151800766
1Q 612365: RNCC: 3 | RNVC: 2

28 Jan 2008

5340-15-119-1306
Access Cover

151191306
73123508: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-105-8976
Spring Tension Clip

151058976
9903904: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-231-5676
Angle Bracket

152315676
598515E082455: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-180-9209
Access Cover

151809209
120020172: RNCC: 3 | RNVC: 2
(241)A5009120020172: RNCC: 5 | RNVC: 2

8 Aug 2008

5340-15-063-3264
Retaining Strap

150633264
60114278: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-113-2795
Retaining Strap

151132795
08218-101B00: RNCC: 3 | RNVC: 2

30 May 1991

5340-15-207-8234
Handle Grip

152078234
5801606081: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-004-2755
Mending Plate

150042755
773171B: RNCC: 3 | RNVC: 2

20 Oct 1981

5340-15-150-6026
Mending Plate

151506026
108948: RNCC: 3 | RNVC: 2

6 Dec 1999

5340-15-178-6447
Mounting Plate

151786447
2C.246615: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-181-3686
Metal Grille

151813686
2C1144IS0021: RNCC: 3 | RNVC: 2
(241)A29802C1144IS0021: RNCC: 5 | RNVC: 2

10 Dec 2008

5340-15-186-8741
Flush Lock

151868741
M5P 1 KA: RNCC: 3 | RNVC: 2

5 Jan 2009

5340-15-177-4262
Retaining Clip

151774262
049202: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-106-9669
Angle Bracket

151069669
1366139: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-204-0261
Lever Bracket

152040261
098131483AS: RNCC: 3 | RNVC: 2

19 Aug 2011

5340-15-179-9058
Spring Holder

151799058
D1402392: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-205-2554
Rod End Connector

152052554
504380139: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-063-5970
Retaining Strap

150635970
5941014: RNCC: 3 | RNVC: 2
5941014: RNCC: 5 | RNVC: 9

13 Nov 1982

5340-15-118-8196
Expansion Plug

151188196
14282970: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-008-0768
Angle Bracket

150080768
60114215: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-108-3157
Retaining Strap

151083157
2492928: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-133-9081
Handle Grip

151339081
1376157: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-100-3253
Retaining Strap

151003253
000204400500: RNCC: 5 | RNVC: 2
000204400500: RNCC: 5 | RNVC: 9

11 Jul 1986

5340-15-205-2865
Cremone Bolt

152052865
680: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-179-9912
Mounting Bracket

151799912
C4581.0000: RNCC: 3 | RNVC: 2
(241)A0069C4581.0000: RNCC: 5 | RNVC: 2

16 Nov 2007

5340-15-181-2415
Access Door Hinge

151812415
070103132-S.S.: RNCC: 3 | RNVC: 2

17 Nov 2008

5340-15-179-9578
Mounting Bracket

151799578
00189520: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-207-8634
Mounting Bracket

152078634
5801343178: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-151-7850
Angle Bracket

151517850
0-173481: RNCC: 3 | RNVC: 2

10 Jul 2000

5340-15-180-1625
Mounting Bracket

151801625
8545399: RNCC: 3 | RNVC: 2

15 Feb 2008

5340-15-121-5747
Mounting Bracket

151215747
1Q 556039: RNCC: 3 | RNVC: 2
1Q 556039: RNCC: 5 | RNVC: 9

18 Sep 1996

5340-15-149-1123
Bow Handle

151491123
60174463: RNCC: 3 | RNVC: 2

2 Dec 1998

5340-15-112-3266
Rigid Caster

151123266
NATR 10X: RNCC: 3 | RNVC: 2

1 Apr 1998

5340-15-000-4367
Loop Clamp

150004367
42590020: RNCC: 3 | RNVC: 2

1 Mar 2013

5340-15-001-8318
Mounting Bracket

150018318
5949790574: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-150-1259
Loop Clamp

151501259
4150055: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-003-2386
Loop Clamp

150032386
ED0036171880-S: RNCC: 3 | RNVC: 2

30 Oct 2013

5340-15-148-1597
Expansion Plug

151481597
16988101: RNCC: 3 | RNVC: 2
16988101: RNCC: 5 | RNVC: 2

25 Jun 1998

5340-15-153-7884
Handle Grip

151537884
15500A103810: RNCC: 5 | RNVC: 2
15500A103810: RNCC: 5 | RNVC: 9

28 Feb 2001

5340-15-111-9308
Retaining Strap

151119308
60125246: RNCC: 3 | RNVC: 2

10 Sep 1989

5340-15-150-0947
Loop Clamp

151500947
044080022: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-112-3424
Angle Bracket

151123424
60149144: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-118-3343
Retaining Strap

151183343
60146853: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-118-4481
Support Hook

151184481
60153549: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-118-3385
Angle Bracket

151183385
60146721: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-119-0135
Access Cover

151190135
70604481: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-149-2970
Angle Bracket

151492970
4882672: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-186-7944
Handwheel

151867944
6112185: RNCC: 3 | RNVC: 2

5 Jan 2009

5340-15-207-4410
Mounting Bracket

152074410
02340208: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-15-118-4032
Angle Bracket

151184032
60167030: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-206-8238
Access Cover

152068238
ED0026051020-S: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-114-7912
Mending Plate

151147912
8243.20.11D: RNCC: 3 | RNVC: 2

12 May 1993

5340-15-007-1959
Retaining Strap

150071959
1393580: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-008-2539
Bow Handle

150082539
101-17-24: RNCC: 3 | RNVC: 2

1 Feb 1982

5340-15-003-3486
Loop Clamp

150033486
1Q 347020LA: RNCC: 3 | RNVC: 2
(241)A01061Q 347020LA: RNCC: 5 | RNVC: 2

4 Nov 2013

5340-15-207-8644
Mounting Bracket

152078644
5801342867: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-154-7578
Mounting Bracket

151547578
F4213.0000: RNCC: 5 | RNVC: 2
F4213.0000: RNCC: 5 | RNVC: 9

18 Sep 2001

5340-15-193-7010
Mounting Bracket

151937010
504248175: RNCC: 3 | RNVC: 2

2 Jul 2010

5340-15-118-1151
Spring Holder

151181151
1P 272791: RNCC: 3 | RNVC: 2
1P 272791: RNCC: 5 | RNVC: 9

22 Mar 1996

5340-15-063-0607
Mending Plate

150630607
0-100375: RNCC: 3 | RNVC: 2

30 Apr 1982

5340-15-059-5378
Recess Handle

150595378
1971TAV49-6: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-120-3539
Loop Clamp

151203539
60176854: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-152-0166
Angle Bracket

151520166
0-162462: RNCC: 3 | RNVC: 2

2 Aug 2000

5340-15-155-1362
Loop Clamp

151551362
142068039: RNCC: 2 | RNVC: 3

18 Jan 2002

5340-15-187-3268
Filler Opening Cap

151873268
0801165: RNCC: 3 | RNVC: 2
(241)A32450801165: RNCC: 5 | RNVC: 2

16 Mar 2009

5340-15-202-4505
Luggage Lock

152024505
1610/4: RNCC: 3 | RNVC: 2
(241)A52001610/4: RNCC: 5 | RNVC: 2

25 Mar 2007

5340-15-202-8786
Loop Clamp

152028786
18087993: RNCC: 3 | RNVC: 2

6 Sep 2007

5340-15-144-4951
Handle Grip

151444951
0136473: RNCC: 3 | RNVC: 2
788-4: RNCC: 3 | RNVC: 2
859-4: RNCC: 3 | RNVC: 2

11 Dec 1996

5340-15-201-0617
Loop Clamp

152010617
EN4114F26WR1: RNCC: 2 | RNVC: 2
(241)I9005EN4114F26WR1: RNCC: 5 | RNVC: 2

16 May 2006

5340-15-009-0433
Retaining Clip

150090433
4134615: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-195-8682
Mounting Bracket

151958682
A0018206244B: RNCC: 3 | RNVC: 2
(241)AJ611A0018206244B: RNCC: 5 | RNVC: 2

23 May 2011

5340-15-061-5414
Loop Clamp

150615414
P36GB8: RNCC: 5 | RNVC: 2
P36GB8: RNCC: 5 | RNVC: 9

12 Oct 1977

5340-15-008-1469
Retaining Strap

150081469
0-34124: RNCC: 3 | RNVC: 2

9 Jun 1981

5340-15-197-1766
Rim Lock Set

151971766
PN UAS 00028242: RNCC: 3 | RNVC: 2
5340F76016600: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-199-4649
Block Clamp

151994649
A464A003A: RNCC: 3 | RNVC: 2
(241)A0126A464A003A: RNCC: 5 | RNVC: 2

12 Apr 2005

5340-15-121-9887
Angle Bracket

151219887
60165220: RNCC: 3 | RNVC: 2

4 Apr 1996

5340-15-120-4456
Mending Plate

151204456
142503361: RNCC: 3 | RNVC: 2

25 May 1995

5340-15-001-5518
Access Cover

150015518
182719918: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-15-001-3087
Recess Handle

150013087
42566648: RNCC: 3 | RNVC: 2

17 Jun 2013

5340-15-008-0728
Retaining Strap

150080728
60113126: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-006-5361
Angle Bracket

150065361
000201216800: RNCC: 5 | RNVC: 2
000201216800: RNCC: 5 | RNVC: 9

29 Jun 1979

5340-15-179-7153
Mounting Bracket

151797153
0000500401646: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-122-2081
Mounting Bracket

151222081
80A069304: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-180-1283
Retaining Strap

151801283
0000093907596: RNCC: 3 | RNVC: 2
93907596: RNCC: 3 | RNVC: 2

28 Jan 2008

5340-15-202-0406
Door Handle

152020406
A.13906A1: RNCC: 3 | RNVC: 2
(241)A7904A.13906A1: RNCC: 5 | RNVC: 2

24 Jan 2007

5340-15-179-7155
Loop Clamp

151797155
0000500401795: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-153-7063
Mounting Bracket

151537063
142011169: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-195-8673
Hand Crank

151958673
A9064200212: RNCC: 3 | RNVC: 2
(241)AJ611A9064200212: RNCC: 5 | RNVC: 2

23 May 2011

5340-15-116-1860
Loop Clamp

151161860
190507140: RNCC: 3 | RNVC: 2

24 Mar 1993

5340-15-064-5887
Loop Clamp

150645887
1391356: RNCC: 3 | RNVC: 2

17 Nov 1983

5340-15-118-9473
Loop Clamp

151189473
75204120: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-105-8398
Retaining Band

151058398
15552: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-103-6289
Expansion Plug

151036289
21770064A: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-15-151-7859
Angle Bracket

151517859
0-179419: RNCC: 3 | RNVC: 2

10 Jul 2000

5340-15-187-8209
Mounting Bracket

151878209
018.066.00.44: RNCC: 3 | RNVC: 2
(241)A6479018.066.00.44: RNCC: 5 | RNVC: 2
018.066.00.44: RNCC: 5 | RNVC: 2

7 May 2009

5340-15-118-9131
Loop Clamp

151189131
70641563: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-001-7894
Mounting Bracket

150017894
5949788175: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-000-4365
Loop Clamp

150004365
425004705119: RNCC: 3 | RNVC: 2

1 Mar 2013

5340-15-151-7851
Angle Bracket

151517851
0-173482: RNCC: 3 | RNVC: 2

10 Jul 2000

5340-15-002-3574
Mounting Bracket

150023574
8017898: RNCC: 3 | RNVC: 2
8017898: RNCC: 5 | RNVC: 2
0053580: RNCC: 5 | RNVC: 2
0053580: RNCC: 5 | RNVC: 9
8017898: RNCC: 5 | RNVC: 9

16 Aug 2013

5340-15-110-7873
Mending Plate

151107873
1370009: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-186-9071
Access Cover

151869071
643810: RNCC: 3 | RNVC: 2
0028851: RNCC: 5 | RNVC: 2

5 Jan 2009

5340-15-006-4540
Mounting Bracket

150064540
800101: RNCC: 3 | RNVC: 2
(241)AB848800101: RNCC: 5 | RNVC: 2

13 Dec 2013

5340-15-112-9345
Loop Clamp

151129345
21612013A: RNCC: 3 | RNVC: 2

23 Apr 1996

5340-15-187-2047
Mounting Bracket

151872047
SC 100 673: RNCC: 3 | RNVC: 2
(241)A3980SC100673: RNCC: 5 | RNVC: 2

24 Feb 2009

5340-15-122-2143
Mounting Bracket

151222143
800051824: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-122-2080
Mounting Bracket

151222080
80A068352: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-071-1731
Handle Grip

150711731
1014B69: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-006-5339
Mending Plate

150065339
000201181200: RNCC: 5 | RNVC: 2
000201181200: RNCC: 5 | RNVC: 9

29 Jun 1979

5340-15-063-3759
Retaining Strap

150633759
60114876: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-004-3719
Mending Plate

150043719
751408L: RNCC: 3 | RNVC: 2

16 Sep 1980

5340-15-003-1469
Catch Strike

150031469
5949791454: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-194-2044
Handwheel

151942044
72931: RNCC: 3 | RNVC: 2

5 Oct 2010

5340-15-109-0842
Angle Bracket

151090842
60137930: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-109-4867
Angle Bracket

151094867
1Q 579680: RNCC: 3 | RNVC: 2
1Q 579680: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-189-2631
Metal Grille

151892631
07.8000.12: RNCC: 3 | RNVC: 2
07.8000.12: RNCC: 5 | RNVC: 2

10 Feb 2010

5340-15-179-9004
Mounting Plate

151799004
D1404694: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-118-3623
Angle Bracket

151183623
60140990: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-119-7168
Angle Bracket

151197168
60173163: RNCC: 3 | RNVC: 2

8 Nov 1994

5340-15-111-3805
Butt Hinge Leaf

151113805
113A6032-401: RNCC: 3 | RNVC: 2

7 Sep 1990

5340-15-104-4378
Expansion Plug

151044378
3611410: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-001-5475
Access Cover

150015475
182719582: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-15-139-3675
Angle Bracket

151393675
42008227: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-109-7221
Retaining Strap

151097221
60141462: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-201-2873
Handle Grip

152012873
162518155: RNCC: 3 | RNVC: 2

20 Jul 2006

5340-15-193-1527
Dashpot

151931527
504139318: RNCC: 3 | RNVC: 2
(241)A4249504139318: RNCC: 5 | RNVC: 2

20 Apr 2010

5340-15-199-5402
Door Handle

151995402
ART.3125: RNCC: 3 | RNVC: 2

17 Apr 2005

5340-15-108-3120
Angle Bracket

151083120
60120789: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-051-5086
Retaining Strap

150515086
T2W184: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-205-4183
Retaining Strap

152054183
178904342: RNCC: 3 | RNVC: 2
(241)A0199178904342: RNCC: 5 | RNVC: 2

8 Mar 2012

5340-15-116-9307
Rod End Clevis

151169307
466.000010: RNCC: 5 | RNVC: 9

28 Jul 1993

5340-15-119-1981
Mending Plate

151191981
75222211: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-112-3489
Angle Bracket

151123489
60148950: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-003-1081
Access Cover

150031081
182719640: RNCC: 3 | RNVC: 2
(241)A0199182719640: RNCC: 5 | RNVC: 2

25 Oct 2013

5340-15-118-6600
Catch Strike

151186600
73125013: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-109-4848
Retaining Strap

151094848
D9103013P: RNCC: 3 | RNVC: 2
D9103013P: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-109-1225
Retaining Strap

151091225
60116059: RNCC: 3 | RNVC: 2

30 Apr 1988

5340-15-187-3245
Snap Hook

151873245
557: RNCC: 3 | RNVC: 2
(241)AB561557: RNCC: 5 | RNVC: 2

16 Mar 2009

5340-15-163-4013
Mounting Plate

151634013
9844666: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-003-9078
Mounting Plate

150039078
182741044: RNCC: 3 | RNVC: 2
(241)A0199182741044: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-108-3771
Retaining Strap

151083771
93806793: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-119-9798
Rod End Clevis

151199798
79957F91: RNCC: 3 | RNVC: 2
79957F91: RNCC: 5 | RNVC: 9

28 May 1996

5340-15-206-7534
Snap Hook

152067534
GRILLO: RNCC: 1 | RNVC: 2
(241)A9999GRILLO: RNCC: 3 | RNVC: 2

10 Jul 2012

5340-15-120-8099
Retaining Band

151208099
031197: RNCC: 3 | RNVC: 2

4 Jul 1996

5340-15-108-7598
Retaining Strap

151087598
8796979: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-152-1247
Retaining Strap

151521247
60165376: RNCC: 3 | RNVC: 2

7 Aug 2000

5340-15-113-0095
Retaining Strap

151130095
44999100000: RNCC: 3 | RNVC: 2
8194708: RNCC: 5 | RNVC: 2

23 Feb 1989

5340-15-009-9871
Angle Bracket

150099871
713847: RNCC: 3 | RNVC: 2

2 Jul 1981

5340-15-111-2760
Ball Socket Seat

151112760
DOA8739: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-065-1473
Mending Plate

150651473
23.78.61.00: RNCC: 3 | RNVC: 2

26 Dec 1983

5340-15-205-2559
Rod End Connector

152052559
504378630: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-194-3491
Rod End Connector

151943491
0205004000032: RNCC: 3 | RNVC: 2

4 Nov 2010

5340-15-179-7011
Mounting Plate

151797011
0000500411182: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-179-6417
Door Closer Dog

151796417
22.43504BG: RNCC: 3 | RNVC: 2
RE0011: RNCC: 5 | RNVC: 2

7 Jun 2007

5340-15-206-1006
Angle Bracket Set

152061006
6051N1482A: RNCC: 3 | RNVC: 2
(241)AJ8116051N1482A: RNCC: 5 | RNVC: 2

21 May 2012

5340-15-177-3649
Mounting Plate

151773649
010780AA: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-000-6302
Snap Hook

150006302
9570001A1KK: RNCC: 3 | RNVC: 2

26 Mar 2013

5340-15-108-9911
Rod End Connector

151089911
10008571: RNCC: 3 | RNVC: 2

9 May 1988

5340-15-116-4108
Plain Solid Disk

151164108
145502189: RNCC: 3 | RNVC: 2

18 May 1993

5340-15-117-0109
Access Cover

151170109
9920276: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-180-5398
Mounting Plate

151805398
06.PT3102.407: RNCC: 3 | RNVC: 2

16 Jun 2008

5340-15-164-1289
Angle Bracket

151641289
1309859080: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-119-7929
Mechanical Stop

151197929
73115925: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-101-4690
Mending Plate

151014690
000200319100: RNCC: 5 | RNVC: 2
000200319100: RNCC: 5 | RNVC: 9

30 May 1987

5340-15-004-5171
Plain Solid Disk

150045171
23982: RNCC: 5 | RNVC: 2
23982: RNCC: 5 | RNVC: 9

17 Jul 1978

5340-15-179-5036
Rod End Clevis

151795036
D0407152: RNCC: 3 | RNVC: 2

23 Jan 2007

5340-15-108-6263
Retaining Strap

151086263
8585196: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-169-0116
Angle Bracket

151690116
F72004853: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-198-7905
Catch Strike

151987905
60188157: RNCC: 3 | RNVC: 2

17 Nov 2004

5340-15-158-6031
Handle Grip

151586031
122505472: RNCC: 3 | RNVC: 2

10 Mar 2004

5340-15-104-4379
Expansion Plug

151044379
23692: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-005-0809
Rod End Clevis

150050809
01510: RNCC: 3 | RNVC: 2

15 Sep 1978

5340-15-168-9964
Coat And Hat Hook

151689964
F72004535: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-105-8482
Bow Handle

151058482
4973713: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-119-0695
Retaining Band

151190695
70925094: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-052-2265
Rod End Clevis

150522265
1284-20: RNCC: 3 | RNVC: 2

15 Jun 1971

5340-15-118-4004
Angle Bracket

151184004
60160504: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-074-3947
Retaining Strap

150743947
C18UNAV1046A37UN1743CD: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-118-2023
Angle Bracket

151182023
60138232: RNCC: 3 | RNVC: 2

22 Apr 1994

5340-15-157-6327
Retaining Bail

151576327
11030308: RNCC: 3 | RNVC: 2
(241)A977211030308: RNCC: 5 | RNVC: 2

9 Oct 2003

5340-15-174-8875
Angle Bracket

151748875
TF0000000034: RNCC: 3 | RNVC: 2

17 Oct 2003

5340-15-001-3373
Bow Handle

150013373
504375593: RNCC: 3 | RNVC: 2

17 Jun 2013

5340-15-110-5753
Mending Plate

151105753
1P 521323: RNCC: 3 | RNVC: 2
1P 521323: RNCC: 5 | RNVC: 9

22 Jun 1999

5340-15-120-7922
Recess Handle

151207922
F78.0276.00: RNCC: 3 | RNVC: 2

2 Aug 1995

5340-15-008-1823
Angle Bracket

150081823
60114457: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-119-7867
Mechanical Stop

151197867
75204920: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-112-8184
Vent Plug

151128184
354056: RNCC: 3 | RNVC: 2
D0354056: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-120-4461
Mending Plate

151204461
132506414: RNCC: 3 | RNVC: 2

25 May 1995

5340-15-147-8899
Pipe Hanger

151478899
ZIM32: RNCC: 3 | RNVC: 2
CAE00460: RNCC: 5 | RNVC: 2

18 May 1998

5340-15-112-9202
Angle Bracket

151129202
79550: RNCC: 3 | RNVC: 2

15 Jan 1996

5340-15-064-4609
Handle Grip

150644609
130887: RNCC: 3 | RNVC: 2

25 May 1984

5340-15-107-2537
Mending Plate

151072537
5054-72: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-112-3472
Retaining Strap

151123472
60148534: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-118-3634
Angle Bracket

151183634
60138323: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-231-9319
Angle Bracket

152319319
99463541: RNCC: 3 | RNVC: 2
534015E137181: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-206-8477
Bow Handle

152068477
98172151: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-155-5186
Retaining Band

151555186
(241)A5015039.07.041: RNCC: 3 | RNVC: 2
039.07.041: RNCC: 3 | RNVC: 2

8 Apr 2002

5340-15-194-4108
Protection Bellows

151944108
B5 6807 009: RNCC: 3 | RNVC: 2
(241)A1140723009801100: RNCC: 5 | RNVC: 2
723009801100: RNCC: 5 | RNVC: 2

5 Nov 2010

5340-15-119-0990
Retaining Strap

151190990
73059884: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-008-0753
Angle Bracket

150080753
60114022: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-008-0755
Angle Bracket

150080755
60114219: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-001-8368
Retaining Band

150018368
500433229: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-153-5176
Access Cover

151535176
142011165: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-204-1865
Access Cover

152041865
195530113: RNCC: 3 | RNVC: 2
(241)A0199195530113: RNCC: 5 | RNVC: 2

21 Sep 2011

5340-15-204-3599
Snap Hook

152043599
25100077: RNCC: 3 | RNVC: 2
(241)ACA6425100077: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-116-4778
Mending Plate

151164778
60163430: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-119-1932
Angle Bracket

151191932
75219871: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-118-7336
Access Cover

151187336
73128151: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-007-1888
Retaining Strap

150071888
1386335: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-063-2779
Angle Bracket

150632779
60108330: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-117-6109
Access Cover

151176109
MC410.26E: RNCC: 3 | RNVC: 2

13 Dec 1993

5340-15-102-1672
Mending Plate

151021672
8243.02.04: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-074-3982
Retaining Strap

150743982
14UNI2136CD: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-064-0589
Retaining Strap

150640589
60114305: RNCC: 3 | RNVC: 2

6 May 1983

5340-15-103-0706
Angle Bracket

151030706
013.09.601: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-109-0860
Retaining Strap

151090860
60129418: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-155-3307
Access Cover

151553307
98412846: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-15-120-4888
Access Cover

151204888
142501277: RNCC: 3 | RNVC: 2

9 Jun 1995

5340-15-120-3523
Mending Plate

151203523
4863166: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-056-0012
Expansion Plug

150560012
25-1663C7-314: RNCC: 3 | RNVC: 2
2300-23-309: RNCC: 5 | RNVC: 2
230023309: RNCC: 5 | RNVC: 2

31 Dec 1975

5340-15-121-6369
Mounting Plate

151216369
800039530: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-151-2663
Angle Bracket

151512663
00085154: RNCC: 3 | RNVC: 2

4 May 2000

5340-15-153-7751
Access Cover

151537751
02700H010367: RNCC: 5 | RNVC: 2
02700H010367: RNCC: 5 | RNVC: 9

28 Feb 2001

5340-15-161-2191
Bow Handle

151612191
S9Z0910098: RNCC: 5 | RNVC: 2
S9Z0910098: RNCC: 5 | RNVC: 9

11 Oct 2000

5340-15-108-7606
Angle Bracket

151087606
60141502: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-150-6837
Access Cover

151506837
0390302091: RNCC: 3 | RNVC: 2

20 Dec 1999

5340-15-156-9252
Rod End Clevis

151569252
60182465: RNCC: 3 | RNVC: 2

11 Mar 2003

5340-15-156-1853
Protection Bellows

151561853
60162896: RNCC: 3 | RNVC: 2

11 Dec 2002

5340-15-008-5986
Angle Bracket

150085986
4654487: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-020-1997
Bow Handle

150201997
01-231N100: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-002-9337
Door Handle

150029337
101556: RNCC: 3 | RNVC: 2
(241)A3593101556: RNCC: 5 | RNVC: 2

18 Oct 2013

5340-15-156-9218
Access Cover

151569218
2206-400: RNCC: 3 | RNVC: 2
8197718: RNCC: 5 | RNVC: 2

11 Mar 2003

5340-15-205-8598
Mounting Plate

152058598
5801375248: RNCC: 3 | RNVC: 2

6 Apr 2012

5340-15-188-3101
Bail Handle

151883101
99367875: RNCC: 3 | RNVC: 2
99367875: RNCC: 3 | RNVC: 2
(241)AD75199367875: RNCC: 5 | RNVC: 2

2 Sep 2009

5340-15-198-8115
Loop Clamp

151988115
18088692: RNCC: 3 | RNVC: 2

17 Nov 2004

5340-15-052-0844
Block Clamp

150520844
M2-4-4: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-131-4407
Handle Grip

151314407
80649-2-5: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-108-6296
Butt Hinge Leaf

151086296
60144142: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-160-5806
Coat And Hat Hook

151605806
F720113271: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-005-5356
Rod End Clevis

150055356
1026-04-182: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-064-8046
Retaining Strap

150648046
01-245-E-296: RNCC: 3 | RNVC: 2

19 Jul 1984

5340-15-105-2169
Mending Plate

151052169
2.1379.015.0: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-054-2204
Spring Tension Clip

150542204
1T18826-1: RNCC: 3 | RNVC: 2

3 Apr 1971

5340-15-001-7902
Mounting Bracket

150017902
5949782031: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-121-9886
Angle Bracket

151219886
60160441: RNCC: 3 | RNVC: 2

4 Apr 1996

5340-15-064-5889
Loop Clamp

150645889
4003787: RNCC: 3 | RNVC: 2

17 Nov 1983

5340-15-119-4024
Angle Bracket

151194024
60171105: RNCC: 3 | RNVC: 2

25 Jul 1994

5340-15-118-9267
Mounting Bracket

151189267
73155446: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-153-0293
Stand Base

151530293
01800H109510: RNCC: 5 | RNVC: 2
01800H109510: RNCC: 5 | RNVC: 9

15 Nov 2000

5340-15-178-8227
Permanent Magnet

151788227
0.300.16577: RNCC: 3 | RNVC: 2
143769-159: RNCC: 5 | RNVC: 2

15 Dec 2005

5340-15-058-1022
Rod End Clevis

150581022
1127-42-106: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-195-6054
Mounting Bracket

151956054
A8190120: RNCC: 3 | RNVC: 2
(241)A9217A8190120: RNCC: 5 | RNVC: 2

8 Apr 2011

5340-15-119-9718
Angle Bracket

151199718
75119F91: RNCC: 3 | RNVC: 2
75119F91: RNCC: 5 | RNVC: 9

22 May 1996

5340-15-118-8035
Access Cover

151188035
8109023: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-180-3653
Access Cover

151803653
2600469: RNCC: 3 | RNVC: 2
2600469: RNCC: 5 | RNVC: 2

29 Apr 2008

5340-15-001-8362
Mounting Bracket

150018362
5949788937: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-199-2387
Loop Clamp

151992387
A079A010NB: RNCC: 3 | RNVC: 2
(241)A0126A079A010NB: RNCC: 5 | RNVC: 2

20 Feb 2005

5340-15-187-2026
Mounting Bracket

151872026
SC 100 654: RNCC: 3 | RNVC: 2
(241)A3980SC100654: RNCC: 5 | RNVC: 2

24 Feb 2009

5340-15-179-7429
Mounting Bracket

151797429
0000098198126: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-207-8652
Mounting Bracket

152078652
5801339780: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-062-1707
Plain Solid Disk

150621707
4-26063C: RNCC: 5 | RNVC: 2
4-26063C: RNCC: 5 | RNVC: 9

28 Sep 1981

5340-15-062-7935
Angle Bracket

150627935
0-34186: RNCC: 3 | RNVC: 2

19 Jul 1982

5340-15-154-3720
Loop Clamp

151543720
EN4113V25NH: RNCC: 2 | RNVC: 2

10 May 2001

5340-15-206-8063
Loop Clamp

152068063
ED0024710060-S: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-151-6629
Flush Lock

151516629
42342406: RNCC: 3 | RNVC: 2

22 Jun 2000

5340-15-158-5872
Spring Holder

151585872
122611576: RNCC: 3 | RNVC: 2

9 Mar 2004

5340-15-004-7795
Loop Clamp

150047795
0-33461: RNCC: 3 | RNVC: 2

7 Sep 1977

5340-15-118-9363
Access Cover

151189363
73157398: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-189-2635
Metal Grille

151892635
8500626136: RNCC: 3 | RNVC: 2
8500626136: RNCC: 5 | RNVC: 2

10 Feb 2010

5340-15-073-8911
Flush Lock

150738911
13A65X90-3LEVE: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-112-8280
Spring Holder

151128280
471192: RNCC: 3 | RNVC: 2
D0471192: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-206-7951
Retaining Clip

152067951
500416691: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-195-8167
Mounting Bracket

151958167
304515: RNCC: 3 | RNVC: 2
(241)AJ611304515: RNCC: 5 | RNVC: 2

16 May 2011

5340-15-116-8631
Loop Clamp

151168631
D0469242: RNCC: 3 | RNVC: 2

8 Apr 1994

5340-15-118-7893
Expansion Plug

151187893
14328501: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-120-2257
Access Cover

151202257
60164331: RNCC: 3 | RNVC: 2

27 Feb 1995

5340-15-001-8242
Mounting Bracket

150018242
5949783404: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-129-7254
Handle Grip

151297254
926184: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-121-7102
Screw Thread Insert

151217102
A0410095164: RNCC: 5 | RNVC: 2
A0410095164: RNCC: 5 | RNVC: 9
A0410095164: RNCC: 5 | RNVC: 9

6 Feb 1996

5340-15-153-7746
Access Cover

151537746
02700A133940: RNCC: 5 | RNVC: 2
02700A133940: RNCC: 5 | RNVC: 9

28 Feb 2001

5340-15-199-5401
Mortise Lock Set

151995401
ART.2025-SX: RNCC: 3 | RNVC: 2

17 Apr 2005

5340-15-186-8364
Hose Clamp

151868364
A437A062A: RNCC: 3 | RNVC: 2

5 Jan 2009

5340-15-062-6994
Loop Clamp

150626994
82296038: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-112-9380
Loop Clamp

151129380
21612019A: RNCC: 3 | RNVC: 2

20 Apr 1996

5340-15-007-0817
Retaining Ring

150070817
0-10382: RNCC: 3 | RNVC: 2

29 Jun 1979

5340-15-120-4450
Mending Plate

151204450
142507346: RNCC: 2 | RNVC: 2
870-1: RNCC: 3 | RNVC: 2

25 May 1995

5340-15-193-7033
Blank Panel

151937033
9903905082: RNCC: 3 | RNVC: 2

2 Jul 2010

5340-15-100-8274
Retaining Strap

151008274
21360014A: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-162-2652
Mounting Bracket

151622652
20.03.81.10: RNCC: 3 | RNVC: 2

17 May 2001

5340-15-004-5075
Clip Retainer Plate

150045075
5AC15321-2: RNCC: 3 | RNVC: 2

13 Sep 1977

5340-15-118-6993
Mounting Bracket

151186993
73128608: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-178-7750
Butt Hinge

151787750
033820: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-153-3038
Stand Base

151533038
122605218: RNCC: 2 | RNVC: 3

13 Dec 2000

5340-15-188-1893
Loop Clamp

151881893
13001690: RNCC: 3 | RNVC: 2
(241)A424913001690: RNCC: 5 | RNVC: 2

28 Jul 2009

5340-15-003-1319
Angle Bracket

150031319
5949788944: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-198-5542
Loop Clamp

151985542
J1220G04: RNCC: 3 | RNVC: 2
(241)A3460J1220G04: RNCC: 5 | RNVC: 2

13 Oct 2004

5340-15-108-3149
Strap Hinge

151083149
4740953: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-207-6986
Cable Retractor

152076986
RC.1243: RNCC: 3 | RNVC: 2
(241)A3028RC.1243: RNCC: 5 | RNVC: 2

12 Nov 2012

5340-15-177-7248
Mounting Bracket

151777248
052798: RNCC: 3 | RNVC: 2

4 Jun 2004

5340-15-187-5664
Bow Handle

151875664
TAK-0063/01: RNCC: 3 | RNVC: 2

9 Apr 2009

5340-15-178-3325
Angle Bracket

151783325
109-0326-32-103: RNCC: 3 | RNVC: 2

29 Apr 2005

5340-15-117-8829
Loop Clamp

151178829
SF260-17-87-01: RNCC: 3 | RNVC: 2
SF260-17-87-01: RNCC: 5 | RNVC: 9

28 Jan 1994

5340-15-109-3822
Mending Plate

151093822
5137-293-33: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-121-0754
Catch Strike

151210754
1083.022-02: RNCC: 3 | RNVC: 2

4 Oct 1995

5340-15-121-3312
Mounting Plate

151213312
463-250700.002: RNCC: 3 | RNVC: 2

7 Nov 1995

Load More Results