What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 19 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 19 of 72

5340-15-065-5143
Plain Solid Disk

150655143
1355-14-311: RNCC: 3 | RNVC: 2

9 Feb 1985

5340-15-009-7131
Plain Solid Disk

150097131
1376-62-360: RNCC: 3 | RNVC: 2
137662360: RNCC: 5 | RNVC: 2

1 Jun 1987

5340-15-114-3540
Angle Bracket

151143540
5176-265-02: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-15-148-2126
Plug Button

151482126
999-5001-10-168: RNCC: 3 | RNVC: 2

2 Jul 1998

5340-15-116-7102
Vent Plug

151167102
DOR0117334: RNCC: 3 | RNVC: 2

2 Feb 1994

5340-15-179-0684
Hinge Torsion Bar

151790684
T0074706: RNCC: 3 | RNVC: 2

20 Apr 2006

5340-15-001-8373
Retaining Band

150018373
500433228: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-006-9185
Rod End Clevis

150069185
523-12-13-01: RNCC: 3 | RNVC: 2

12 Jan 1977

5340-15-068-8348
Butt Hinge Leaf

150688348
N4618-23: RNCC: 3 | RNVC: 2

6 Oct 1986

5340-15-051-3165
Loop Clamp

150513165
1-04187-05: RNCC: 3 | RNVC: 2
10418705: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-052-0841
Angle Bracket

150520841
H1270-23: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-175-1592
Access Cover

151751592
COD VL 112-505: RNCC: 3 | RNVC: 2

21 Jan 2004

5340-15-100-4803
Screw Thread Insert

151004803
721070-10: RNCC: 3 | RNVC: 2
721070-10: RNCC: 5 | RNVC: 9

16 Feb 1987

5340-15-118-7011
Access Cover

151187011
73128779: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-108-5217
Plug Button

151085217
14673780: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-000-4011
Lock Key

150004011
29.00732.13: RNCC: 3 | RNVC: 2

27 Feb 2013

5340-15-203-7233
Access Cover

152037233
00240R0290: RNCC: 3 | RNVC: 2
00240R0290: RNCC: 5 | RNVC: 2
CV173766: RNCC: 5 | RNVC: 2

27 Jun 2011

5340-15-118-2024
Angle Bracket

151182024
60138231: RNCC: 3 | RNVC: 2

22 Apr 1994

5340-15-163-3676
Bow Handle

151633676
9261284: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-007-6287
Angle Bracket

150076287
135578-010: RNCC: 3 | RNVC: 2

22 Jun 1989

5340-15-205-3584
Caster Wheel

152053584
30-6164-16/4: RNCC: 3 | RNVC: 2

2 Mar 2012

5340-15-121-9789
Access Cover

151219789
78/2B/5/3: RNCC: 3 | RNVC: 2

20 Jul 1996

5340-15-057-7179
Angle Bracket

150577179
1276-23-466: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-007-2608
Retaining Strap

150072608
1387449: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-161-0698
Coat And Hat Hook

151610698
F720184531: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-118-7466
Mounting Bracket

151187466
9431469: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-000-4809
Pipe Hanger

150004809
71415870: RNCC: 3 | RNVC: 2
71415870: RNCC: 5 | RNVC: 2

11 Mar 2013

5340-15-136-5441
Handle Grip

151365441
0-28856: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-189-1401
Loop Clamp

151891401
41231093: RNCC: 3 | RNVC: 2
(241)A424941231093: RNCC: 5 | RNVC: 2

28 Jan 2010

5340-15-062-9184
Mending Plate

150629184
0-100339: RNCC: 3 | RNVC: 2

28 Aug 1981

5340-15-062-8194
Loop Clamp

150628194
158214250510: RNCC: 3 | RNVC: 2

12 Oct 1982

5340-15-113-3572
Loop Clamp

151133572
73040883: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-179-7154
Mounting Bracket

151797154
0000500401766: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-157-5447
Loop Clamp

151575447
8888-7: RNCC: 2 | RNVC: 3

19 Sep 2003

5340-15-009-2477
Angle Bracket

150092477
P-882599-001: RNCC: 3 | RNVC: 2

2 Sep 1980

5340-15-052-0103
Handle Grip

150520103
B910-20-16-05: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-207-8703
Mounting Bracket

152078703
5801344295: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-001-8249
Mounting Bracket

150018249
5949784057: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-108-7073
Loop Clamp

151087073
12177590: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-108-3108
Loop Clamp

151083108
4602990: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-113-8277
Spring Tension Clip

151138277
42973/1: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-15-151-5314
Retaining Strap

151515314
0-102937: RNCC: 3 | RNVC: 2
(241)A39630-102937: RNCC: 5 | RNVC: 2
1PA39630-102937: RNCC: 5 | RNVC: 2

6 Jun 2000

5340-15-108-7282
Threaded Rod End

151087282
39X503-12-23-01: RNCC: 3 | RNVC: 2

19 Jul 1989

5340-15-163-4568
Block Clamp

151634568
10C-024-100: RNCC: 3 | RNVC: 2

24 Sep 2002

5340-15-204-8686
Butt Hinge

152048686
ATA399-DB7001-RM103: RNCC: 3 | RNVC: 2
ATA399-DB7001-RM103: RNCC: 3 | RNVC: 2
(241)AD751ATA399-DB7001-RM103: RNCC: 5 | RNVC: 2

19 Jan 2012

5340-15-203-2424
Loop Clamp

152032424
32HJ04543413S01-801-026: RNCC: 3 | RNVC: 2

10 Dec 2007

5340-15-151-8141
Angle Bracket

151518141
0-103521: RNCC: 3 | RNVC: 2
1PA39630-103521: RNCC: 5 | RNVC: 2
(241)A39630-103521: RNCC: 5 | RNVC: 2

13 Jul 2000

5340-15-178-7814
Mounting Bracket

151787814
047027: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-004-2839
Retaining Strap

150042839
2T98165-8: RNCC: 3 | RNVC: 2

24 Feb 1978

5340-15-152-7203
Angle Bracket

151527203
60186909: RNCC: 3 | RNVC: 2

18 Oct 2000

5340-15-001-1801
Mounting Bracket

150011801
504376896: RNCC: 3 | RNVC: 2

3 Jun 2013

5340-15-121-6581
Mounting Bracket

151216581
800052097: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-152-7881
Mounting Bracket

151527881
P121140: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-187-5354
Bow Handle

151875354
62330-66/012: RNCC: 3 | RNVC: 2

9 Apr 2009

5340-15-154-6352
Loop Clamp

151546352
12UNI2136-A34-2633: RNCC: 1 | RNVC: 2
240032906: RNCC: 1 | RNVC: 2

31 Jul 2001

5340-15-151-1144
Mounting Bracket

151511144
380-2057/01: RNCC: 3 | RNVC: 2

21 Mar 2000

5340-15-132-2455
Handle Grip

151322455
105-48-57-141-02: RNCC: 3 | RNVC: 2
105-48-57-141-02: RNCC: 5 | RNVC: 9

9 Oct 1996

5340-15-107-8889
Angle Bracket

151078889
02-10-242-11-4: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-007-8430
Mending Plate

150078430
592915: RNCC: 3 | RNVC: 2

27 Aug 1979

5340-15-177-3800
Bridge Clamp

151773800
031569: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-204-0220
Mounting Bracket

152040220
143F: RNCC: 3 | RNVC: 2

19 Aug 2011

5340-15-109-1832
Mending Plate

151091832
60104612: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-117-0323
Mounting Bracket

151170323
G99-C: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-199-5190
Access Cover

151995190
122510184: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-15-121-0607
Screw Thread Insert

151210607
M2.5(X0.45)X1.5D-ACC.INOX18/8AU-: RNCC: 3 | RNVC: 1
210602530: RNCC: 5 | RNVC: 2

19 May 1999

5340-15-155-4005
Angle Bracket

151554005
6853 493-428: RNCC: 3 | RNVC: 2

12 Mar 2002

5340-15-204-8425
Butt Hinge Leaf

152048425
109-0640-50-547: RNCC: 3 | RNVC: 2

17 Jan 2012

5340-15-059-3447
Retaining Strap

150593447
1127-36-253: RNCC: 3 | RNVC: 2

16 Sep 1980

5340-15-194-7024
Lock Key

151947024
R15904000: RNCC: 3 | RNVC: 2

29 Dec 2010

5340-15-119-1927
Mending Plate

151191927
75219205: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-049-5299
Handle Grip

150495299
011-1904: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-103-8680
Expansion Plug

151038680
14281970: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-181-1714
Control Rod

151811714
178950216: RNCC: 3 | RNVC: 2
(241)A0199178950216: RNCC: 5 | RNVC: 2

5 Nov 2008

5340-15-007-1882
Retaining Strap

150071882
1374836: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-201-4486
Protection Bellows

152014486
164822213: RNCC: 3 | RNVC: 2
(241)A0199164822213: RNCC: 5 | RNVC: 2

12 Sep 2006

5340-15-005-0461
Leather Strap

150050461
0-09467: RNCC: 3 | RNVC: 2

7 Sep 1977

5340-15-187-9865
Mounting Bracket

151879865
SUPPRO 04: RNCC: 3 | RNVC: 2
(241)AH375SUPPRO04: RNCC: 5 | RNVC: 2

16 Jun 2009

5340-15-150-9802
Hook Handle

151509802
369-09098-105: RNCC: 3 | RNVC: 2

17 Feb 2000

5340-15-109-4053
Angle Bracket

151094053
5137-303-34: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-002-3432
Retaining Band

150023432
SP-AC1: RNCC: 3 | RNVC: 2
(241)A0478SP-AC1: RNCC: 5 | RNVC: 2

12 Aug 2013

5340-15-063-3130
Rod End Clevis

150633130
1/02482/11: RNCC: 3 | RNVC: 2
10248211: RNCC: 5 | RNVC: 2

15 Oct 1982

5340-15-040-4226
Handle Grip

150404226
7-5913-100-25645-2: RNCC: 3 | RNVC: 2
7-5913-1-00-25645-2: RNCC: 5 | RNVC: 2

10 Apr 1970

5340-15-180-7848
Mounting Bracket

151807848
OMP-MCC-207: RNCC: 3 | RNVC: 2
(241)AE591OMP-MCC-207: RNCC: 5 | RNVC: 2

22 Jul 2008

5340-15-113-1719
Rod End Clevis

151131719
312A6597-001: RNCC: 3 | RNVC: 2

7 Sep 1990

5340-15-061-4114
Angle Bracket

150614114
P-120191-001: RNCC: 3 | RNVC: 2
P120191-001: RNCC: 5 | RNVC: 2

19 Jan 1978

5340-15-100-1080
Access Door Hinge

151001080
P-882739-401: RNCC: 3 | RNVC: 2
P882739-401: RNCC: 5 | RNVC: 2

10 Sep 1986

5340-15-119-9248
Loop Clamp

151199248
69F004P003: RNCC: 3 | RNVC: 2
69F004P003: RNCC: 3 | RNVC: 2

21 Nov 1994

5340-15-205-7793
Blank Panel

152057793
182742108: RNCC: 3 | RNVC: 2
(241)A0199182742108: RNCC: 5 | RNVC: 2

3 Apr 2012

5340-15-202-4461
Luggage Lock

152024461
0350/4: RNCC: 3 | RNVC: 2
(241)A52000350/4: RNCC: 5 | RNVC: 2

25 Mar 2007

5340-15-187-2040
Mounting Bracket

151872040
SC 100 667: RNCC: 3 | RNVC: 2
(241)A3980SC100667: RNCC: 5 | RNVC: 2

24 Feb 2009

5340-15-118-9520
Expansion Plug

151189520
75204422: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-179-4926
Clamping Catch

151794926
0.008.9632.0: RNCC: 3 | RNVC: 2

22 Jan 2007

5340-15-122-2207
Mounting Bracket

151222207
800068340: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-007-7156
Angle Bracket

150077156
50090117-1: RNCC: 5 | RNVC: 2
50090117-1: RNCC: 5 | RNVC: 2
50090117-1: RNCC: 5 | RNVC: 9

15 Jul 1980

5340-15-119-7841
Catch Strike

151197841
70633545: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-206-8125
Loop Clamp

152068125
ED0036301460-S: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-195-8685
Mounting Bracket

151958685
A0008690333: RNCC: 3 | RNVC: 2
(241)AJ611A0008690333: RNCC: 5 | RNVC: 2

23 May 2011

5340-15-162-4114
Loop Clamp

151624114
3630.070: RNCC: 3 | RNVC: 2

16 Aug 2001

5340-15-151-6042
Bridge Clamp

151516042
42011579: RNCC: 3 | RNVC: 2

19 Jun 2000

5340-15-204-3263
Mounting Bracket

152043263
0000500428584: RNCC: 3 | RNVC: 2
(241)A39630000500428584: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-115-6102
Roller Holder

151156102
D0470468: RNCC: 3 | RNVC: 2

6 Jun 1994

5340-15-179-0827
Swivel Caster

151790827
24ANT 150X35: RNCC: 3 | RNVC: 2

13 Jun 2006

5340-15-156-9859
Swivel Caster

151569859
(241)A3428TYPE SCK 150X50: RNCC: 3 | RNVC: 2
TYPE SCK 150X50: RNCC: 3 | RNVC: 2

31 Mar 2003

5340-15-102-5395
Loop Clamp

151025395
70925635: RNCC: 3 | RNVC: 2

30 Apr 1987

5340-15-060-2706
Screw Thread Insert

150602706
4-02240-2: RNCC: 3 | RNVC: 2

9 Feb 1977

5340-15-009-7132
Plain Solid Disk

150097132
1376-62-358: RNCC: 3 | RNVC: 2
137662358: RNCC: 5 | RNVC: 2

1 Jun 1987

5340-15-148-2034
Access Cover

151482034
921-0289-02-01: RNCC: 3 | RNVC: 2

1 Jul 1998

5340-15-004-2302
Clip Retainer Plate

150042302
FL0283-101: RNCC: 3 | RNVC: 2

15 Dec 1977

5340-15-152-3567
Angle Bracket

151523567
0-174766: RNCC: 3 | RNVC: 2
00174766: RNCC: 3 | RNVC: 2
(241)A39630-174766: RNCC: 5 | RNVC: 2
1PA39630-174766: RNCC: 5 | RNVC: 2

4 Sep 2000

5340-15-060-6124
Retaining Clip

150606124
109-0130-13-3: RNCC: 3 | RNVC: 2

16 Oct 1976

5340-15-150-1682
Caster Frame

151501682
IS-SUPP/8: RNCC: 3 | RNVC: 2

2 Sep 1999

5340-15-001-8301
Bridge Clamp

150018301
500408796: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-120-3528
Loop Clamp

151203528
17314790: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-177-4334
Mounting Plate

151774334
051124: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-118-4510
Clamping Catch

151184510
60151197: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-006-9212
Rod End Clevis

150069212
NOR5-225-15-5G: RNCC: 3 | RNVC: 2

30 May 1980

5340-15-063-3418
Loop Clamp

150633418
60109118: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-065-7022
Angle Bracket

150657022
85115-101: RNCC: 3 | RNVC: 2

15 May 1985

5340-15-068-1366
Access Door Hinge

150681366
66174-001A: RNCC: 3 | RNVC: 2

26 Mar 1986

5340-15-111-9494
Butt Hinge Leaf

151119494
275A2142-001: RNCC: 3 | RNVC: 2

30 Jan 1991

5340-15-115-4315
Flange Protector

151154315
212-4600-17-1: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-114-1140
Butt Hinge

151141140
8810.00.10: RNCC: 3 | RNVC: 2

11 Dec 1992

5340-15-203-6521
Mounting Bracket

152036521
01593: RNCC: 3 | RNVC: 2

24 Jun 2011

5340-15-177-4284
Bridge Clamp

151774284
049702: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-177-4067
Loop Clamp

151774067
043934: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-204-3769
Mounting Bracket

152043769
0752870: RNCC: 3 | RNVC: 2

26 Oct 2011

5340-15-180-5003
Loop Clamp

151805003
60176714: RNCC: 3 | RNVC: 2
(241)A424960176714: RNCC: 5 | RNVC: 2

6 Jun 2008

5340-15-102-8528
Butt Hinge

151028528
213A7174-401: RNCC: 3 | RNVC: 2

16 Dec 1988

5340-15-163-3752
Mounting Bracket

151633752
9435680: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-195-7978
Mounting Bracket

151957978
341177A: RNCC: 3 | RNVC: 2
(241)AJ611341177A: RNCC: 5 | RNVC: 2

16 May 2011

5340-15-186-9116
Mounting Bracket

151869116
858329: RNCC: 3 | RNVC: 2
858329: RNCC: 5 | RNVC: 9

5 Jan 2009

5340-15-189-1402
Loop Clamp

151891402
41231097: RNCC: 3 | RNVC: 2
(241)A424941231097: RNCC: 5 | RNVC: 2

28 Jan 2010

5340-15-163-3849
Bridge Clamp

151633849
9458983: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-178-4685
Stand Base

151784685
DYA021: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-111-3765
Handle Grip

151113765
223A4021-001: RNCC: 3 | RNVC: 2

7 Sep 1990

5340-15-102-1199
Retaining Band

151021199
V44/1-03-208: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-117-6314
Angle Bracket

151176314
109-0301-27-129: RNCC: 3 | RNVC: 2

22 Dec 1993

5340-15-103-1138
Rod End Clevis

151031138
895.801.312.2: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-204-3337
Mounting Bracket

152043337
0000500427476: RNCC: 3 | RNVC: 2
(241)A39630000500427476: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-177-3739
Mounting Bracket

151773739
025552: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-059-0044
Handle Grip

150590044
5430-1: RNCC: 3 | RNVC: 2

25 Aug 1975

5340-15-170-8852
Access Cover

151708852
TE403457E: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-007-4259
Angle Bracket

150074259
P-110259-003: RNCC: 3 | RNVC: 2
P110259-003: RNCC: 5 | RNVC: 2

19 Feb 1980

5340-15-204-4472
Mounting Bracket

152044472
JVA-1000: RNCC: 3 | RNVC: 2

7 Nov 2011

5340-15-194-2620
Mounting Bracket

151942620
DDED7261-02: RNCC: 3 | RNVC: 2
(241)A3460DDED7261-02: RNCC: 5 | RNVC: 2

21 Oct 2010

5340-15-118-6514
Access Cover

151186514
70683865: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-121-0606
Screw Thread Insert

151210606
M8(X1.25)X1.5D-ACC.INOX18/8AUST-: RNCC: 3 | RNVC: 1
210602537: RNCC: 5 | RNVC: 2

21 Sep 1995

5340-15-064-8047
Retaining Strap

150648047
01-245-E-297: RNCC: 3 | RNVC: 2

19 Jul 1984

5340-15-064-7254
Loop Clamp

150647254
60118466: RNCC: 3 | RNVC: 2

17 Nov 1983

5340-15-168-9508
Coat And Hat Hook

151689508
F72002337: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-119-4028
Angle Bracket

151194028
60173526: RNCC: 3 | RNVC: 2

25 Jul 1994

5340-15-160-5686
Coat And Hat Hook

151605686
F720091211: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-179-2880
Butt Hinge

151792880
9664897-17: RNCC: 3 | RNVC: 2

16 Oct 2006

5340-15-148-6667
Mending Plate

151486667
190540189: RNCC: 3 | RNVC: 2

17 Sep 1998

5340-15-000-6244
Expansion Shield

150006244
501467: RNCC: 3 | RNVC: 2

25 Mar 2013

5340-15-009-1395
Angle Bracket

150091395
1388963: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-007-8560
Spring Tension Clip

150078560
4975188: RNCC: 3 | RNVC: 2

27 Aug 1979

5340-15-002-3600
Bridge Clamp

150023600
4852219: RNCC: 3 | RNVC: 2
4852219: RNCC: 5 | RNVC: 2
0053592: RNCC: 5 | RNVC: 2
4852219: RNCC: 5 | RNVC: 9
0053592: RNCC: 5 | RNVC: 9

16 Aug 2013

5340-15-121-4619
Butt Hinge Leaf

151214619
213A7077-007: RNCC: 3 | RNVC: 2

21 Dec 1995

5340-15-122-5941
Mounting Bracket

151225941
49797-001: RNCC: 5 | RNVC: 2
49797-001: RNCC: 5 | RNVC: 9
49797-001: RNCC: 5 | RNVC: 9

10 Sep 1996

5340-15-155-9732
Loop Clamp

151559732
EN4113F08NH: RNCC: 2 | RNVC: 2

17 Oct 2002

5340-15-111-9303
Retaining Strap

151119303
42022959: RNCC: 3 | RNVC: 2

10 Sep 1989

5340-15-150-0975
Flush Lock

151500975
083030097: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-008-0567
Loop Clamp

150080567
1398306: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-149-9474
Retaining Clip

151499474
C1015216: RNCC: 3 | RNVC: 2
(241)A3334C1015216: RNCC: 5 | RNVC: 2

28 Jun 1999

5340-15-064-5884
Loop Clamp

150645884
5954609: RNCC: 3 | RNVC: 2
(7001)5340150645884: RNCC: 5 | RNVC: 2

17 Nov 1983

5340-15-107-8757
Angle Bracket

151078757
60112274: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-002-3516
Friction Catch

150023516
5801360057: RNCC: 3 | RNVC: 2

16 Aug 2013

5340-15-177-4376
Mounting Plate

151774376
051505: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-062-9073
Mending Plate

150629073
0-55863: RNCC: 3 | RNVC: 2

28 Aug 1981

5340-15-062-9145
Loop Clamp

150629145
0-100205: RNCC: 3 | RNVC: 2

28 Aug 1981

5340-15-005-5338
Angle Bracket

150055338
1137-05-144: RNCC: 3 | RNVC: 2

20 Nov 1978

5340-15-060-4585
Rod End Clevis

150604585
69444-101: RNCC: 3 | RNVC: 2

21 Apr 1977

5340-15-060-3753
Rod End Clevis

150603753
04893-101: RNCC: 3 | RNVC: 2

15 Mar 1977

5340-15-102-5691
Rod End Clevis

151025691
69175: RNCC: 3 | RNVC: 2
69175F01: RNCC: 3 | RNVC: 2

2 Mar 1993

5340-15-194-0092
Retaining Strap

151940092
98185213: RNCC: 3 | RNVC: 2

12 Aug 2010

5340-15-158-5925
Handle Grip

151585925
162530136: RNCC: 3 | RNVC: 2

9 Mar 2004

5340-15-157-6653
Angle Bracket

151576653
11031616: RNCC: 3 | RNVC: 2
(241)A977211031616: RNCC: 5 | RNVC: 2

15 Oct 2003

5340-15-199-4652
Block Clamp

151994652
A465A3001A: RNCC: 3 | RNVC: 2
(241)A0126A465A3001A: RNCC: 5 | RNVC: 2

12 Apr 2005

5340-15-063-3344
Loop Clamp

150633344
60104906: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-180-4994
Loop Clamp

151804994
17762491: RNCC: 3 | RNVC: 2
(241)A424917762491: RNCC: 5 | RNVC: 2

6 Jun 2008

5340-15-119-9069
Rod End Clevis

151199069
142004218: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-005-1853
Loop Clamp

150051853
4026254: RNCC: 3 | RNVC: 2
4026254: RNCC: 5 | RNVC: 2
4026254: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-007-8872
Strap Hinge

150078872
1385128: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-052-7274
Butt Hinge

150527274
1971TAV69-9MSEN38: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-002-3107
Mounting Bracket

150023107
504377072: RNCC: 3 | RNVC: 2

6 Aug 2013

5340-15-107-2831
Loop Clamp

151072831
73632: RNCC: 3 | RNVC: 2
73632F91: RNCC: 3 | RNVC: 2

2 Nov 1993

5340-15-053-0664
Screw Thread Insert

150530664
26T042P003: RNCC: 3 | RNVC: 2
26T042P003: RNCC: 5 | RNVC: 2
26T042P003: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-111-2818
Access Cover

151112818
DOA090980: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-150-1162
Mounting Bracket

151501162
7800013: RNCC: 3 | RNVC: 2
(241)A50097800013: RNCC: 5 | RNVC: 2

29 Jul 1999

5340-15-180-3894
Mounting Bracket

151803894
93929767: RNCC: 3 | RNVC: 2
(241)A424993929767: RNCC: 5 | RNVC: 2

7 May 2008

5340-15-062-1743
Angle Bracket

150621743
622178 B: RNCC: 3 | RNVC: 2

1 May 1977

5340-15-118-2618
Spring Holder

151182618
D1404150: RNCC: 3 | RNVC: 2

11 Apr 1995

5340-15-113-2285
Bow Handle

151132285
341-8036/01: RNCC: 3 | RNVC: 2

12 Sep 1991

5340-15-067-9335
Clip Retainer Plate

150679335
68677-101: RNCC: 3 | RNVC: 2

20 Mar 1986

5340-15-193-7886
Turnbuckle Body

151937886
109-0134-08-101: RNCC: 3 | RNVC: 2

14 Jul 2010

5340-15-116-7692
Retaining Strap

151167692
8106C/53: RNCC: 3 | RNVC: 2

20 Apr 1994

5340-15-005-6842
Retaining Ring

150056842
0155: RNCC: 3 | RNVC: 2

14 Jun 1979

5340-15-058-6755
Rim Lock

150586755
1971-035: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-001-8007
Mounting Bracket

150018007
5949784905: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-120-3291
Angle Bracket

151203291
81447: RNCC: 3 | RNVC: 2
93163995: RNCC: 5 | RNVC: 2
81447: RNCC: 5 | RNVC: 9

30 Mar 1995

5340-15-151-7865
Retaining Strap

151517865
0-179854: RNCC: 3 | RNVC: 2

10 Jul 2000

5340-15-177-4285
Bridge Clamp

151774285
049703: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-179-5832
Stand Base

151795832
99370115: RNCC: 5 | RNVC: 9

11 Apr 2007

5340-15-200-7774
Loop Clamp

152007774
320868F01: RNCC: 3 | RNVC: 2
(241)A0106320868F01: RNCC: 5 | RNVC: 2

26 Feb 2006

5340-15-178-7382
Mounting Bracket

151787382
027944: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-100-4485
Loop Clamp

151004485
7-67055-000-74097: RNCC: 3 | RNVC: 2

24 Mar 1987

5340-15-118-4444
Strap Hinge

151184444
60153535: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-120-3534
Loop Clamp

151203534
17315890: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-007-7066
Loop Clamp

150077066
4514820: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-118-3401
Loop Clamp

151183401
60142393: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-061-1573
Angle Bracket

150611573
939031A1: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-073-5252
Flush Lock

150735252
13A65X110-1LEVA: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-062-7912
Retaining Strap

150627912
0-34162: RNCC: 3 | RNVC: 2

28 Aug 1982

5340-15-007-0574
Lock-Release Lever

150070574
1137-03-127: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-147-3818
Mounting Plate

151473818
635C01310-101: RNCC: 3 | RNVC: 2

31 Oct 1997

5340-15-187-5967
Access Cover

151875967
71480759: RNCC: 3 | RNVC: 2

14 Apr 2009

5340-15-116-3547
Screw Thread Insert

151163547
210002702: RNCC: 3 | RNVC: 2

28 Apr 1993

5340-15-119-3835
Retaining Band

151193835
60174584: RNCC: 3 | RNVC: 2

25 Jul 1994

5340-15-198-6933
Loop Clamp

151986933
79083850: RNCC: 3 | RNVC: 2
(241)AE19279083850: RNCC: 5 | RNVC: 2
79083850: RNCC: 5 | RNVC: 2

3 Nov 2004

5340-15-139-8513
Retaining Band

151398513
1802902: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-110-6671
Door Handle

151106671
1905-12-916: RNCC: 3 | RNVC: 2

15 Jan 1990

5340-15-060-2362
Rim Lock

150602362
1971TAV040: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-168-9426
Coat And Hat Hook

151689426
F72001718: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-110-2362
Retaining Strap

151102362
129-0041-34-103: RNCC: 3 | RNVC: 2

18 Oct 1989

5340-15-152-9388
Stand Base

151529388
48050000001/3: RNCC: 3 | RNVC: 2

9 Nov 2000

5340-15-052-1176
Rod End Clevis

150521176
H787-12-60-03: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-115-2257
Plug Button

151152257
SFP.40-3/4+F: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-007-5003
Lock-Release Lever

150075003
1139-02-110: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-116-1868
Plain Solid Disk

151161868
190511128: RNCC: 3 | RNVC: 2

24 Mar 1993

5340-15-109-3731
Mending Plate

151093731
5137-294-30: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-102-4687
Butt Hinge Leaf

151024687
01-261-10-189: RNCC: 3 | RNVC: 2

30 Apr 1987

5340-15-121-4143
Angle Bracket

151214143
738352-02: RNCC: 3 | RNVC: 2
738352-02: RNCC: 5 | RNVC: 9

12 Dec 1995

5340-15-003-3806
Webbing Strap

150033806
374657-001: RNCC: 3 | RNVC: 2

5 Nov 2013

5340-15-207-1753
Handle Grip

152071753
109-0790V04-109: RNCC: 3 | RNVC: 2

17 Sep 2012

5340-15-056-6702
Bail Handle

150566702
310-0294-01: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-002-3106
Mounting Bracket

150023106
504377073: RNCC: 3 | RNVC: 2

6 Aug 2013

5340-15-118-7484
Bridge Clamp

151187484
9431845: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-118-2017
Loop Clamp

151182017
17315590: RNCC: 3 | RNVC: 2

22 Apr 1994

5340-15-108-1667
Bridge Clamp

151081667
1576-18-216: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-000-4825
Pipe Hanger

150004825
71422008: RNCC: 3 | RNVC: 2
71422008: RNCC: 5 | RNVC: 2

11 Mar 2013

5340-15-157-5388
Loop Clamp

151575388
12001-11: RNCC: 2 | RNVC: 3

19 Sep 2003

5340-15-120-6612
Angle Bracket

151206612
D0467043: RNCC: 3 | RNVC: 2

1 May 1996

5340-15-103-8100
Angle Bracket

151038100
23638-1: RNCC: 3 | RNVC: 2
23638-1: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-119-5588
Angle Bracket

151195588
4885337: RNCC: 3 | RNVC: 2

19 Sep 1994

5340-15-236-9680
Door Handle

152369680
41600: RNCC: 3 | RNVC: 2
534015E078581: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-008-9994
Access Door Hinge

150089994
109-0310-22-1: RNCC: 3 | RNVC: 2

11 Jun 1981

5340-15-154-9625
Hook Handle

151549625
RAK-4047/01: RNCC: 5 | RNVC: 2
RAK-4047/01: RNCC: 5 | RNVC: 9

28 Nov 2001

5340-15-062-5240
Retaining Strap

150625240
1141-31-111: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-152-7828
Mounting Bracket

151527828
P110203: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-059-2486
Retaining Strap

150592486
1127-05-527: RNCC: 3 | RNVC: 2

12 Oct 1974

5340-15-001-1096
Mounting Bracket

150011096
5801354863: RNCC: 3 | RNVC: 2

31 May 2013

5340-15-118-7566
Mounting Bracket

151187566
9435952: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-000-2468
Loop Clamp

150002468
4825103: RNCC: 3 | RNVC: 2

12 Feb 2013

5340-15-003-3866
Angle Bracket

150033866
ED0092850460-S: RNCC: 3 | RNVC: 2

5 Nov 2013

5340-15-004-8139
Mending Plate

150048139
0-33357: RNCC: 3 | RNVC: 2

7 Sep 1977

5340-15-177-3917
Bridge Clamp

151773917
036103: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-200-7803
Rim Lock

152007803
ART.4031/S: RNCC: 3 | RNVC: 2

26 Feb 2006

5340-15-122-1610
Mounting Bracket

151221610
145508213: RNCC: 3 | RNVC: 2

28 May 1996

5340-15-179-6804
Loop Clamp

151796804
61608952: RNCC: 3 | RNVC: 2
(241)A424961608952: RNCC: 5 | RNVC: 2

7 Jun 2007

5340-15-158-4413
T Plate

151584413
28209-001: RNCC: 3 | RNVC: 2

15 Feb 2004

5340-15-115-6907
Handle Grip

151156907
D0567917: RNCC: 3 | RNVC: 2
P131/35: RNCC: 3 | RNVC: 2

8 Mar 1994

5340-15-201-6288
Door Handle

152016288
1860-29076: RNCC: 3 | RNVC: 2
(241)AF604CLABMEC055: RNCC: 5 | RNVC: 2
C-LAB-MEC-055: RNCC: 5 | RNVC: 2

2 Nov 2006

5340-15-057-1283
Loop Clamp

150571283
2-1575-101-99178: RNCC: 3 | RNVC: 2
2-1575-101-99179: RNCC: 5 | RNVC: 2

24 Nov 1972

5340-15-109-3717
Mending Plate

151093717
5137-292-11: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-157-9072
Mending Plate

151579072
00121014: RNCC: 3 | RNVC: 2
0-121014: RNCC: 3 | RNVC: 2
1PA39630-121014: RNCC: 5 | RNVC: 2
(241)A39630-121014: RNCC: 5 | RNVC: 2

24 Nov 2003

5340-15-115-1783
Bow Handle

151151783
I150-25M6: RNCC: 3 | RNVC: 2
20202: RNCC: 5 | RNVC: 2

29 Nov 1992

5340-15-112-3487
Angle Bracket

151123487
4837078: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-197-6305
Leakproof Seal Plug

151976305
PN UAS 00047659: RNCC: 3 | RNVC: 2
5330F76038783: RNCC: 5 | RNVC: 9

8 Apr 2004

5340-15-100-0089
Bow Handle

151000089
39X1706: RNCC: 3 | RNVC: 2

22 Oct 1986

5340-15-177-3632
Loop Clamp

151773632
002962AA: RNCC: 3 | RNVC: 2
FS008-14: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-152-7838
Mounting Plate

151527838
P110502: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-204-0318
Runner

152040318
VG2-S: RNCC: 3 | RNVC: 2

19 Aug 2011

5340-15-058-7699
Retaining Clip

150587699
70-3630-33: RNCC: 3 | RNVC: 2

3 May 1974

5340-15-200-7804
Rim Lock

152007804
ART.4031/D: RNCC: 3 | RNVC: 2

26 Feb 2006

5340-15-000-8956
Lock Key

150008956
290073613: RNCC: 3 | RNVC: 2

22 Apr 2013

5340-15-151-5203
Angle Bracket

151515203
0-168693: RNCC: 3 | RNVC: 2
(241)A39630-168693: RNCC: 5 | RNVC: 2

1 Jun 2000

5340-15-111-3789
Strap Hinge

151113789
113A6012-007: RNCC: 3 | RNVC: 2

7 Sep 1990

5340-15-113-1463
Rod End Clevis

151131463
311A7750-001: RNCC: 3 | RNVC: 2

7 Oct 1990

5340-15-180-0352
Catch Strike

151800352
788000: RNCC: 3 | RNVC: 2

16 Nov 2007

5340-15-194-7808
Mending Plate

151947808
50192: RNCC: 3 | RNVC: 2
(241)A348850192: RNCC: 5 | RNVC: 2

14 Jan 2011

5340-15-155-1233
Retaining Bail

151551233
142038172: RNCC: 2 | RNVC: 3

18 Jan 2002

5340-15-005-4576
Mending Plate

150054576
1137-05-334: RNCC: 3 | RNVC: 2

20 Nov 1978

5340-15-155-7190
Plug Button

151557190
999-5001-10-221: RNCC: 3 | RNVC: 2

29 May 2002

5340-15-153-2515
Loop Clamp

151532515
CFG1-20/12: RNCC: 2 | RNVC: 3
122530113: RNCC: 5 | RNVC: 3

12 Dec 2000

5340-15-113-1672
Angle Bracket

151131672
277A2207-001: RNCC: 3 | RNVC: 2

7 Oct 1990

5340-15-124-8325
Angle Bracket

151248325
8788570: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-110-1998
Access Cover

151101998
DOR0112639: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-100-5379
Angle Bracket

151005379
HXY ST3020 IE: RNCC: 3 | RNVC: 2

19 Feb 1987

5340-15-147-4163
Mending Plate

151474163
3210004500: RNCC: 3 | RNVC: 2

18 Nov 1997

5340-15-148-1598
Expansion Plug

151481598
16988501: RNCC: 3 | RNVC: 2
(241)A424916988501: RNCC: 5 | RNVC: 2

25 Jun 1998

5340-15-118-9047
Access Cover

151189047
08320234: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-157-9271
Angle Bracket

151579271
0-171384: RNCC: 3 | RNVC: 2
1PA39630-171384: RNCC: 5 | RNVC: 2
(241)A39630-171384: RNCC: 5 | RNVC: 2

25 Nov 2003

5340-15-073-5270
Flush Lock

150735270
75-70X68: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-193-3126
Mounting Bracket

151933126
6050 3 112-10: RNCC: 3 | RNVC: 2
(241)A772260503112-10: RNCC: 5 | RNVC: 2

30 Apr 2010

5340-15-195-8683
Mounting Bracket

151958683
A0018206344A: RNCC: 3 | RNVC: 2
(241)AJ611A0018206344A: RNCC: 5 | RNVC: 2

23 May 2011

5340-15-001-8360
Mounting Bracket

150018360
5949790812: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-206-7028
Mounting Plate

152067028
137640912: RNCC: 3 | RNVC: 2
(241)A0199137640912: RNCC: 5 | RNVC: 2

4 Jul 2012

5340-15-041-5542
Handle Grip

150415542
V260790-14: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-040-1615
Angle Bracket

150401615
1-2551-102-27824: RNCC: 3 | RNVC: 2
1-2551-1-02-27824: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-154-2234
Corner Brace

151542234
60160535: RNCC: 3 | RNVC: 2

28 Mar 2001

5340-15-117-9355
Mending Plate

151179355
142512164: RNCC: 3 | RNVC: 2

8 Feb 1994

5340-15-007-4255
Angle Bracket

150074255
P-110258-003: RNCC: 3 | RNVC: 2
P110258-003: RNCC: 5 | RNVC: 2

12 Mar 1980

5340-15-045-3485
Loop Clamp

150453485
721-12-01: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-163-4596
Rod End Connector

151634596
17H-329A01000-013-803K: RNCC: 3 | RNVC: 2

24 Sep 2002

5340-15-001-7717
Mounting Plate

150017717
150 044 13-6: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-177-4079
Mounting Bracket

151774079
044728: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-141-8747
Handle Grip

151418747
153301: RNCC: 3 | RNVC: 2
153301: RNCC: 5 | RNVC: 9

9 Jun 1997

5340-15-063-2759
Retaining Strap

150632759
60108148: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-200-3945
Retaining Bail

152003945
7190057000: RNCC: 3 | RNVC: 2
(241)A91727190057000: RNCC: 5 | RNVC: 2

11 Jan 2006

5340-15-148-6215
Caster Wheel

151486215
TBFP 60 ZN: RNCC: 3 | RNVC: 2

15 Sep 1998

5340-15-152-7982
Access Cover

151527982
P200510: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-204-3478
Snap Hook

152043478
25100018: RNCC: 3 | RNVC: 2
(241)ACA6425100018: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-179-9029
Mounting Plate

151799029
D1403322: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-003-8979
Mounting Plate

150038979
182741124: RNCC: 3 | RNVC: 2
(241)A0199182741124: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-194-2047
Handle Grip

151942047
21101: RNCC: 3 | RNVC: 2
OC0009: RNCC: 5 | RNVC: 2

5 Oct 2010

5340-15-112-3856
Loop Clamp

151123856
00.1827: RNCC: 3 | RNVC: 2

1 Jul 1990

5340-15-188-3852
Padlock

151883852
A.1027: RNCC: 3 | RNVC: 2

3 Sep 2009

5340-15-001-7886
Mounting Bracket

150017886
500419344: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-004-8141
Mending Plate

150048141
0-33096: RNCC: 3 | RNVC: 2

7 Sep 1977

5340-15-187-8193
Mounting Bracket

151878193
018.066.00.29: RNCC: 3 | RNVC: 2
(241)A6479018.066.00.29: RNCC: 5 | RNVC: 2
018.066.00.29: RNCC: 5 | RNVC: 2

7 May 2009

5340-15-152-6803
Handle Grip

151526803
147/40 M8: RNCC: 3 | RNVC: 2
4B9410005000: RNCC: 5 | RNVC: 2

10 Oct 2000

5340-15-100-5184
Clip Retainer Plate

151005184
2124-150-1020: RNCC: 3 | RNVC: 2
2124-150-1020: RNCC: 5 | RNVC: 9

13 Aug 1987

5340-15-106-7548
Angle Bracket

151067548
42015437: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-120-4514
Angle Bracket

151204514
142512140: RNCC: 3 | RNVC: 2

25 May 1995

5340-15-074-3310
Retaining Strap

150743310
A22UNAV1046A37UN1743: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-062-2510
Clip Retainer Plate

150622510
54002006102: RNCC: 3 | RNVC: 2
54002006102: RNCC: 5 | RNVC: 9

9 Sep 1981

5340-15-117-2512
Access Cover

151172512
337733-P1: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-15-148-3522
Mending Plate

151483522
110770: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-156-1766
Expansion Plug

151561766
16988001: RNCC: 3 | RNVC: 2

11 Dec 2002

5340-15-105-8480
Bow Handle

151058480
1500/IC/III-08.09.58-49-US: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-188-1675
Snap Hook

151881675
359XX: RNCC: 3 | RNVC: 2

24 Jul 2009

5340-15-063-3763
Retaining Strap

150633763
60116036: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-119-1904
Access Cover

151191904
75216921: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-119-4030
Angle Bracket

151194030
60173243: RNCC: 3 | RNVC: 2

25 Jul 1994

5340-15-115-3573
Shimmy Damper

151153573
TN4.9006.012.04: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-007-1907
Retaining Strap

150071907
1384639: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-119-5661
Screw Thread Insert

151195661
4835398: RNCC: 3 | RNVC: 2

19 Sep 1994

5340-15-108-7613
Angle Bracket

151087613
60136132: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-001-8316
Mounting Bracket

150018316
5949780983: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-177-4080
Mounting Bracket

151774080
044817: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-207-8716
Mounting Bracket

152078716
504375045: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-187-8183
Mounting Bracket

151878183
018.066.00.16_SX: RNCC: 3 | RNVC: 2
(241)A6479018.066.00.16_SX: RNCC: 5 | RNVC: 2
018.066.00.16_SX: RNCC: 5 | RNVC: 2

7 May 2009

5340-15-151-9463
Angle Bracket

151519463
0-175438: RNCC: 3 | RNVC: 2

26 Jul 2000

5340-15-108-5230
Loop Clamp

151085230
4760226: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-195-6291
Retaining Band

151956291
PYC102350: RNCC: 3 | RNVC: 2
PYC102350: RNCC: 3 | RNVC: 2
(241)AJ557PYC102350: RNCC: 5 | RNVC: 2

8 Apr 2011

5340-15-201-9764
Catch Strike

152019764
79114658: RNCC: 3 | RNVC: 2
(241)AD75179114658: RNCC: 5 | RNVC: 2
79114658: RNCC: 5 | RNVC: 2

17 Jan 2007

5340-15-188-5174
Mounting Bracket

151885174
98487328: RNCC: 3 | RNVC: 2
Z04.04.03.10: RNCC: 5 | RNVC: 2
5340PL0956313: RNCC: 6 | RNVC: 9

29 Sep 2009

5340-15-119-3811
Loop Clamp

151193811
60170649: RNCC: 3 | RNVC: 2

25 Jul 1994

5340-15-189-2529
Mounting Bracket

151892529
9819053: RNCC: 3 | RNVC: 2

10 Feb 2010

5340-15-114-5723
Retaining Strap

151145723
000205122700: RNCC: 5 | RNVC: 2
000205122700: RNCC: 5 | RNVC: 9

18 Jun 1992

5340-15-104-4370
Expansion Plug

151044370
3B: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-112-3488
Angle Bracket

151123488
60149145: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-155-3939
Angle Bracket

151553939
8854 138-121: RNCC: 3 | RNVC: 2

12 Mar 2002

5340-15-109-0036
Retaining Strap

151090036
1357148: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-108-5693
Retaining Strap

151085693
60135657: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-179-7068
Angle Bracket

151797068
00161502: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-119-1309
Access Cover

151191309
73123513: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-102-1172
Bow Handle

151021172
1040-01-107: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-15-187-6292
Mounting Bracket

151876292
4897685: RNCC: 3 | RNVC: 2

15 Apr 2009

5340-15-153-6874
Loop Clamp

151536874
142068024: RNCC: 3 | RNVC: 2

20 Feb 2001

5340-15-153-9044
Mounting Bracket

151539044
00084216: RNCC: 3 | RNVC: 2
(241)A333400084216: RNCC: 4 | RNVC: 1
9421T6: RNCC: 5 | RNVC: 2

9 Mar 2001

5340-15-205-2495
Retaining Strap

152052495
13386970: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-139-7568
Spring Tension Clip

151397568
0009874: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-060-8531
Bow Handle

150608531
250-001-410: RNCC: 3 | RNVC: 2
A81021-12-22: RNCC: 5 | RNVC: 2
A81021-12-22: RNCC: 5 | RNVC: 2

19 Jun 1977

5340-15-178-5497
Mounting Plate

151785497
2231.029.0004: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-003-4659
Access Cover

150034659
182707281: RNCC: 3 | RNVC: 2
(241)A0199182707281: RNCC: 5 | RNVC: 2

14 Nov 2013

5340-15-109-4186
Tubular Fairlead

151094186
80510-80610: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-207-0686
Retaining Strap

152070686
1438647: RNCC: 3 | RNVC: 2

31 Aug 2012

5340-15-153-2546
Stand Base

151532546
122605400: RNCC: 2 | RNVC: 3

12 Dec 2000

5340-15-151-7849
Angle Bracket

151517849
0-153894: RNCC: 3 | RNVC: 2

10 Jul 2000

5340-15-109-1112
Mending Plate

151091112
11604A05-03: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-120-2489
Retaining Strap

151202489
93818085: RNCC: 3 | RNVC: 2

6 Mar 1995

5340-15-180-1639
Mounting Plate

151801639
3800035: RNCC: 3 | RNVC: 2

15 Feb 2008

5340-15-073-5225
Rim Lock

150735225
39A55X30: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-109-2934
Spring Tension Clip

151092934
60144943: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-101-5396
Retaining Strap

151015396
000200596000: RNCC: 5 | RNVC: 2
000200596000: RNCC: 5 | RNVC: 9

17 Oct 1987

5340-15-160-5571
Coat And Hat Hook

151605571
F720030551: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-007-0719
Handle Grip

150070719
1137-16-900: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-063-9931
Angle Bracket

150639931
1055-04-260: RNCC: 3 | RNVC: 2

16 Dec 1983

5340-15-147-1199
Mortise Latch

151471199
206-1015-39-2: RNCC: 3 | RNVC: 2

9 Sep 1997

5340-15-065-7244
Access Door Hinge

150657244
109-0503-17-6: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-15-073-5272
Flush Lock

150735272
75-70X78: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-009-7407
Lock-Release Lever

150097407
1236-05-104: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-203-1556
Latch Bar

152031556
212-1300-99-101: RNCC: 3 | RNVC: 2

27 Nov 2007

5340-15-147-4972
Butt Hinge Leaf

151474972
13895-001: RNCC: 3 | RNVC: 2

4 Dec 1997

5340-15-105-8982
Spring Tension Clip

151058982
12.203.399: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-152-7965
Mounting Bracket

151527965
P200306: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-162-4227
Loop Clamp

151624227
151113-1: RNCC: 3 | RNVC: 2

25 Sep 2001

5340-15-111-7987
Angle Bracket

151117987
9960: RNCC: 3 | RNVC: 2

1 Jul 1990

5340-15-109-3898
Angle Bracket

151093898
5137-265-21: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-001-4234
Retaining Strap

150014234
182702205: RNCC: 3 | RNVC: 2

2 Jul 2013

5340-15-005-4988
Retaining Strap

150054988
JJ72179: RNCC: 3 | RNVC: 2

9 Apr 1979

5340-15-001-1454
Mounting Bracket

150011454
D1-55074-401: RNCC: 3 | RNVC: 2

31 May 2013

5340-15-118-4786
Vent Plug

151184786
33421/22: RNCC: 3 | RNVC: 2
33421/22: RNCC: 5 | RNVC: 9

6 Feb 1995

5340-15-118-8339
Mounting Bracket

151188339
9449080: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-127-7058
Handle Grip

151277058
7502-37: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-058-0914
Butt Hinge Leaf

150580914
N4657-2: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-060-2714
Mending Plate

150602714
4-02246: RNCC: 3 | RNVC: 2

9 Feb 1977

5340-15-003-9100
Access Cover

150039100
182707030: RNCC: 3 | RNVC: 2
(241)A0199182707030: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-100-2722
Access Door Hinge

151002722
2-54260-101-74623A2: RNCC: 3 | RNVC: 2

22 Oct 1986

5340-15-178-4825
Access Cover

151784825
99462587: RNCC: 3 | RNVC: 2
A063000-018: RNCC: 5 | RNVC: 2

1 Jul 2005

5340-15-158-4382
Angle Bracket

151584382
23021-101: RNCC: 3 | RNVC: 2

15 Feb 2004

5340-15-005-5348
Rod End Connector

150055348
1026-01-271: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-045-2934
Loop Clamp

150452934
N0R2-505-06-29B: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-001-5669
Runner

150015669
19007003: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-009-2474
Angle Bracket

150092474
P-882572-001: RNCC: 3 | RNVC: 2

2 Sep 1980

5340-15-113-0845
Retaining Strap

151130845
20974-101A1: RNCC: 3 | RNVC: 2

9 May 1991

5340-15-187-6207
Retaining Clip

151876207
RO/PC: RNCC: 3 | RNVC: 2
(241)AH405RO/PC: RNCC: 5 | RNVC: 2

15 Apr 2009

5340-15-057-4386
Retaining Band

150574386
204-9000-20-3: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-150-3422
Screw Thread Insert

151503422
37-10010-04: RNCC: 3 | RNVC: 2

29 Sep 1999

5340-15-122-5931
Mounting Bracket

151225931
46356-001: RNCC: 5 | RNVC: 2
46356-001: RNCC: 5 | RNVC: 9
46356-001: RNCC: 5 | RNVC: 9

10 Sep 1996

5340-15-073-5260
Flush Lock

150735260
73-70X53: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-113-3119
Retaining Strap

151133119
253A1133-001: RNCC: 3 | RNVC: 2

7 Oct 1990

5340-15-114-9963
Mending Plate

151149963
5124-217-07: RNCC: 3 | RNVC: 2

28 May 1993

5340-15-121-3127
Mounting Plate

151213127
28033-52: RNCC: 3 | RNVC: 2
28033-52: RNCC: 5 | RNVC: 9

7 Nov 1995

5340-15-102-9042
Ball Socket Seat

151029042
1P209712: RNCC: 3 | RNVC: 2
1P209712: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-103-2936
Angle Bracket

151032936
5088: RNCC: 3 | RNVC: 2

26 Nov 1988

5340-15-000-7279
Loop Clamp

150007279
BRP-5030579: RNCC: 3 | RNVC: 2

3 Apr 2013

5340-15-153-3919
Mending Plate

151533919
5137-321-16: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-114-5431
Door Handle

151145431
4321-18H: RNCC: 3 | RNVC: 2

18 Jun 1992

5340-15-059-7241
Angle Bracket

150597241
260-14-487-11: RNCC: 3 | RNVC: 2
260-14-487-11: RNCC: 5 | RNVC: 9

27 May 1976

5340-15-051-1133
Retaining Strap

150511133
72-067-510: RNCC: 3 | RNVC: 2
72-067-510: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-180-3019
Mounting Bracket

151803019
3M-71373: RNCC: 3 | RNVC: 2
(241)A34453M-71373: RNCC: 3 | RNVC: 2

15 Apr 2008

5340-15-108-5239
Spring Tension Clip

151085239
60113548: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-151-1900
Angle Bracket

151511900
AF060180801: RNCC: 3 | RNVC: 2

14 Apr 2000

5340-15-149-2893
Access Cover

151492893
4861346: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-074-3943
Retaining Strap

150743943
C10UNAV1046A37UN1743CD: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-045-4551
Loop Clamp

150454551
747-12-08: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-051-5084
Retaining Strap

150515084
T2I221C: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-107-2855
Angle Bracket

151072855
71000: RNCC: 3 | RNVC: 2

20 Apr 1994

5340-15-003-9483
Mounting Plate

150039483
126009: RNCC: 3 | RNVC: 2

5 Dec 2013

5340-15-207-8437
Lock Bolt

152078437
374658-001: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-064-2043
Screw Thread Insert

150642043
590-962-303: RNCC: 3 | RNVC: 2
590.962.303: RNCC: 5 | RNVC: 2
590.962.303: RNCC: 5 | RNVC: 2

6 Dec 1983

5340-15-155-3920
Angle Bracket

151553920
8854 138-211: RNCC: 3 | RNVC: 2

12 Mar 2002

5340-15-151-7257
Retaining Strap

151517257
0-179417: RNCC: 3 | RNVC: 2

4 Jul 2000

5340-15-120-2713
Clamping Catch

151202713
60166022: RNCC: 3 | RNVC: 2

9 Mar 1995

5340-15-118-0911
Valve Seat

151180911
467967: RNCC: 3 | RNVC: 2
D0467967: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-009-0430
Retaining Strap

150090430
1383862: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-193-5227
Mounting Bracket

151935227
771-1016/02: RNCC: 3 | RNVC: 2
(241)A0069771-1016/02: RNCC: 5 | RNVC: 2

27 May 2010

5340-15-115-6906
Handle Grip

151156906
I.222/30-M8: RNCC: 3 | RNVC: 2
D0569629: RNCC: 5 | RNVC: 2

8 Mar 1994

5340-15-187-5571
Mounting Bracket

151875571
TAF-0005/01: RNCC: 3 | RNVC: 2

9 Apr 2009

5340-15-064-3816
Screw Thread Insert

150643816
F492E3B-1: RNCC: 3 | RNVC: 2
F492E3B-1: RNCC: 5 | RNVC: 2

1 Mar 1984

5340-15-108-2543
Plain Solid Disk

151082543
0455/4/25/7: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-108-1672
Spring Holder

151081672
1576-18-204: RNCC: 3 | RNVC: 2
157618204: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-051-3168
Loop Clamp

150513168
1-01159-05: RNCC: 3 | RNVC: 2
10115905: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-059-7397
Screw Thread Insert

150597397
1182-20432: RNCC: 3 | RNVC: 2

5 Feb 1976

5340-15-109-4726
Mending Plate

151094726
1P 579696: RNCC: 3 | RNVC: 2
1P 579696: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-100-8279
Retaining Strap

151008279
21610086A: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-007-2543
Angle Bracket

150072543
1380458: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-150-1138
Access Cover

151501138
77800164: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-002-3515
Clamping Catch

150023515
504376096: RNCC: 3 | RNVC: 2

16 Aug 2013

5340-15-007-9365
Retaining Strap

150079365
4445992: RNCC: 3 | RNVC: 2
4445992: RNCC: 5 | RNVC: 9

1 Mar 1980

5340-15-114-3549
Vent Plug

151143549
5216-221-05: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-15-118-9109
Angle Bracket

151189109
70633982: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-151-9443
Angle Bracket

151519443
0-174635: RNCC: 3 | RNVC: 2
00174635: RNCC: 3 | RNVC: 2
(241)A39630-174635: RNCC: 5 | RNVC: 2
1PA39630-174635: RNCC: 5 | RNVC: 2

26 Jul 2000

5340-15-193-5053
Loop Clamp

151935053
RPP-214/14: RNCC: 3 | RNVC: 2

25 May 2010

5340-15-059-4599
Loop Clamp

150594599
10-11-45-00: RNCC: 3 | RNVC: 2

10 Apr 1975

5340-15-126-7349
Handle Grip

151267349
2603-3: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-152-1041
Angle Bracket

151521041
60139407: RNCC: 3 | RNVC: 2

7 Aug 2000

5340-15-153-5235
Access Cover

151535235
142065822: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-007-5131
Screw Thread Insert

150075131
1239-01-231: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-061-2652
Handle Grip

150612652
000200092600: RNCC: 5 | RNVC: 2
1200096-122100002: RNCC: 5 | RNVC: 2
000200092600: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-194-3815
Mounting Bracket

151943815
109-B700-35-189: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-15-009-4738
Angle Bracket

150094738
999-0300-01-1: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-005-1076
Mending Plate

150051076
1137-15-129: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-063-7325
Mending Plate

150637325
40.60.01.313: RNCC: 3 | RNVC: 2
19.35.64.00: RNCC: 5 | RNVC: 2

30 May 1983

5340-15-001-1593
Mounting Plate

150011593
D8405250: RNCC: 3 | RNVC: 2

31 May 2013

5340-15-186-7649
Retaining Band

151867649
0000500414631: RNCC: 3 | RNVC: 2
500414631: RNCC: 3 | RNVC: 2

5 Jan 2009

5340-15-107-0562
Bow Handle

151070562
4790025: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-156-9337
Bow Handle

151569337
259: RNCC: 3 | RNVC: 2
1PA424942535094: RNCC: 5 | RNVC: 2
259: RNCC: 5 | RNVC: 2
42535094: RNCC: 5 | RNVC: 2

13 Mar 2003

5340-15-074-3976
Retaining Strap

150743976
5UNI2136CD: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-065-7277
Access Door Hinge

150657277
109-0363-02-1: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-15-001-3617
Lock Key

150013617
71-212423A: RNCC: 3 | RNVC: 2

25 Jun 2013

5340-15-117-0764
Rod End Clevis

151170764
109-0041-20-107: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-008-0429
Angle Bracket

150080429
1127-80-156: RNCC: 3 | RNVC: 2
112780156: RNCC: 5 | RNVC: 2

1 Jun 1987

5340-15-005-8309
Loop Clamp

150058309
NOR2-505-06-19A: RNCC: 3 | RNVC: 2

2 Jan 1979

5340-15-153-2884
Handle Grip

151532884
122505421: RNCC: 2 | RNVC: 3

13 Dec 2000

5340-15-111-9304
Retaining Strap

151119304
4831110: RNCC: 3 | RNVC: 2

10 Sep 1989

5340-15-135-5725
Handle Grip

151355725
99817035: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-155-6555
Protection Bellows

151556555
0550122: RNCC: 3 | RNVC: 2
(241)A97720550122: RNCC: 8 | RNVC: 2

14 May 2002

5340-15-187-4634
Butt Hinge

151874634
473-2155: RNCC: 3 | RNVC: 2
(241)AA136473-2155: RNCC: 5 | RNVC: 2

2 Apr 2009

5340-15-055-8692
Angle Bracket

150558692
260-05-101-27: RNCC: 3 | RNVC: 2
260-05-101-27: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-132-2460
Angle Bracket

151322460
140-20-31-402-00: RNCC: 3 | RNVC: 2
140-20-31-402-00: RNCC: 5 | RNVC: 9

9 Oct 1996

5340-15-000-4785
Retaining Bail

150004785
45482550: RNCC: 3 | RNVC: 2
45482550: RNCC: 5 | RNVC: 2

11 Mar 2013

5340-15-198-9109
Screw Thread Insert

151989109
26HJ04103051S01-018/N: RNCC: 3 | RNVC: 2

25 Nov 2004

5340-15-170-8854
Access Cover

151708854
TE301463: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-057-5906
Butt Hinge

150575906
1971TAV69-11: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-059-9568
Spring Holder

150599568
109-0101-32-3: RNCC: 3 | RNVC: 2

10 Nov 1976

5340-15-071-0034
Loop Clamp

150710034
260-14-90-11: RNCC: 3 | RNVC: 2
260-14-90-11: RNCC: 5 | RNVC: 9

31 Dec 1978

5340-15-007-3882
Loop Clamp

150073882
1394733: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-007-4969
Loop Clamp

150074969
10UNI2136A342633CDCR: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-201-3873
Screw Thread Insert

152013873
5387.4B-2094: RNCC: 3 | RNVC: 2
(241)A53875387.4B-2094: RNCC: 5 | RNVC: 2

30 Jul 2006

5340-15-107-1187
Retaining Strap

151071187
301-01-2250: RNCC: 3 | RNVC: 2

14 Apr 1987

5340-15-060-2899
Screw Thread Insert

150602899
1376-31-386: RNCC: 3 | RNVC: 2
137631386: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-110-5739
Retaining Strap

151105739
529055: RNCC: 2 | RNVC: 2
1P 529055: RNCC: 3 | RNVC: 2
1P 529055: RNCC: 5 | RNVC: 9
529055: RNCC: 5 | RNVC: 9

15 Oct 1996

5340-15-054-9715
Fusible Plug

150549715
315-0098-01: RNCC: 3 | RNVC: 2
KT7904: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-109-3699
Mending Plate

151093699
5137-410-02: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-153-9398
Angle Bracket

151539398
142057312: RNCC: 2 | RNVC: 3

12 Mar 2001

5340-15-116-2664
Angle Bracket

151162664
190518232: RNCC: 3 | RNVC: 2

15 Apr 1993

Load More Results