What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 18 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 18 of 72

5340-15-179-2686
Access Cover

151792686
109-0816-38-115: RNCC: 3 | RNVC: 2

10 Aug 2006

5340-15-193-9791
Mounting Plate

151939791
45481419: RNCC: 3 | RNVC: 2

10 Aug 2010

5340-15-170-8848
Angle Bracket

151708848
RS422586E: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-162-1545
Casement Fastener

151621545
79102560: RNCC: 3 | RNVC: 2
(241)AD75179102560: RNCC: 5 | RNVC: 2
79102560: RNCC: 5 | RNVC: 2

2 Mar 2001

5340-15-119-7166
Angle Bracket

151197166
60173116: RNCC: 3 | RNVC: 2

8 Nov 1994

5340-15-001-1407
Mounting Plate

150011407
CARP28393: RNCC: 3 | RNVC: 2

31 May 2013

5340-15-157-9282
Angle Bracket

151579282
0-171715: RNCC: 3 | RNVC: 2
1PA39630-171715: RNCC: 5 | RNVC: 2
(241)A39630-171715: RNCC: 5 | RNVC: 2

25 Nov 2003

5340-15-117-2513
Access Cover

151172513
337734-P1: RNCC: 3 | RNVC: 2
58310E002005: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-15-112-3529
Butt Hinge Leaf

151123529
60148774: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-153-9727
Rod End Clevis

151539727
8108834: RNCC: 3 | RNVC: 2

13 Mar 2001

5340-15-004-0674
Rod End Clevis

150040674
28147-101: RNCC: 3 | RNVC: 2

8 Feb 1978

5340-15-194-8370
Mortise Lock Set

151948370
SCI11610: RNCC: 1 | RNVC: 2
(241)A3319SCI11610: RNCC: 3 | RNVC: 2

24 Jan 2011

5340-15-206-2542
Flush Catch

152062542
AW002HC063A279A: RNCC: 3 | RNVC: 2
(241)A0126AW002HC063A279A: RNCC: 5 | RNVC: 2

31 May 2012

5340-15-117-1961
Mending Plate

151171961
190521166: RNCC: 3 | RNVC: 2

2 Sep 1993

5340-15-051-3154
Expansion Plug

150513154
1-43290-01: RNCC: 3 | RNVC: 2
A040015-025: RNCC: 5 | RNVC: 2
14329001: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-045-3168
Rod End Clevis

150453168
510-12-30-01: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-155-2787
Expansion Plug

151552787
60174745: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-15-101-5390
Mending Plate

151015390
000200309000: RNCC: 3 | RNVC: 2

30 May 1987

5340-15-207-3438
Door Handle

152073438
76043538: RNCC: 3 | RNVC: 2

9 Oct 2012

5340-15-003-7625
Door Handle

150037625
8574: RNCC: 3 | RNVC: 2

21 Nov 2013

5340-15-146-7309
Threaded Rod End

151467309
SMLG-12.45: RNCC: 3 | RNVC: 2

2 Jul 2001

5340-15-070-9442
Retaining Strap

150709442
F333A3-24: RNCC: 3 | RNVC: 2
F333A3-24: RNCC: 5 | RNVC: 2

1 Mar 1978

5340-15-154-7577
Mounting Bracket

151547577
RAF-0477/01: RNCC: 5 | RNVC: 2
RAF-0477/01: RNCC: 5 | RNVC: 9

18 Sep 2001

5340-15-065-7245
Access Door Hinge

150657245
109-0503-26-1: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-15-150-5891
Butt Hinge

151505891
A37858-01-25: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-15-004-3914
Angle Bracket

150043914
P-110264-001: RNCC: 3 | RNVC: 2
P110264-001: RNCC: 5 | RNVC: 2

27 Jun 1978

5340-15-101-5391
Mending Plate

151015391
000200308900: RNCC: 5 | RNVC: 2
000200308900: RNCC: 5 | RNVC: 9

30 May 1987

5340-15-193-3569
Expansion Shield

151933569
504070041: RNCC: 3 | RNVC: 2
(241)A4249504070041: RNCC: 5 | RNVC: 2

10 May 2010

5340-15-009-4842
Retaining Strap

150094842
6-30457-101-73261A1: RNCC: 3 | RNVC: 2

21 Nov 1980

5340-15-157-9166
Angle Bracket

151579166
0-163680: RNCC: 3 | RNVC: 2
(241)A39630-163680: RNCC: 5 | RNVC: 2
1PA39630-163680: RNCC: 5 | RNVC: 2

24 Nov 2003

5340-15-179-7076
Bow Handle

151797076
0000500411618: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-108-5978
Loop Clamp

151085978
12180290: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-178-9498
Mounting Bracket

151789498
AG018MD004AA00: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-15-001-8167
Mounting Bracket

150018167
5949788675: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-005-2073
Retaining Clip

150052073
6152641: RNCC: 3 | RNVC: 2

16 Feb 1999

5340-15-112-3501
Angle Bracket

151123501
60153228: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-064-2253
Loop Clamp

150642253
60116417: RNCC: 3 | RNVC: 2

6 May 1983

5340-15-108-5233
Loop Clamp

151085233
12173990: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-206-8070
Loop Clamp

152068070
ED0036301550-S: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-202-9039
Screw Thread Insert

152029039
528-665: RNCC: 3 | RNVC: 2
(241)AA136528-665: RNCC: 5 | RNVC: 2

17 Sep 2007

5340-15-120-3554
Angle Bracket

151203554
60176840: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-108-7068
Loop Clamp

151087068
1395085: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-123-0955
Handle Grip

151230955
8476037: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-149-8101
Access Cover

151498101
129035: RNCC: 3 | RNVC: 2
0052401: RNCC: 5 | RNVC: 2

2 Jun 1999

5340-15-009-1026
Retaining Strap

150091026
1239-08-107: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-151-9462
Angle Bracket

151519462
0-175381: RNCC: 3 | RNVC: 2
00175381: RNCC: 3 | RNVC: 2
(241)A39630-175381: RNCC: 5 | RNVC: 2
1PA39630-175381: RNCC: 5 | RNVC: 2

26 Jul 2000

5340-15-058-6948
Rod End Clevis

150586948
AF106-05A41: RNCC: 3 | RNVC: 2

11 Mar 1975

5340-15-109-0838
Angle Bracket

151090838
60125882: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-150-6417
Rod End Clevis

151506417
NOR5-225-17-8: RNCC: 3 | RNVC: 2

20 Dec 1999

5340-15-122-1780
Access Cover

151221780
23857-01: RNCC: 3 | RNVC: 2
23857-01: RNCC: 3 | RNVC: 2

22 May 1997

5340-15-007-5022
Butt Hinge Leaf

150075022
1239-01-135: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-065-0908
Rod End Connector

150650908
1355-14-115: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-062-5263
Retaining Clip

150625263
1113-03-113: RNCC: 3 | RNVC: 2

2 Dec 1981

5340-15-064-4304
Angle Bracket

150644304
P-842650-002: RNCC: 3 | RNVC: 2
P842650-002: RNCC: 5 | RNVC: 2

10 Jul 1984

5340-15-051-3156
Expansion Plug

150513156
1-01590-00: RNCC: 3 | RNVC: 2
10159000: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-151-2159
Loop Clamp

151512159
00085732: RNCC: 3 | RNVC: 2

28 Apr 2000

5340-15-147-5863
Screw Thread Insert

151475863
0132-0083016: RNCC: 3 | RNVC: 2
0132-0083016: RNCC: 5 | RNVC: 9

30 Dec 1997

5340-15-005-3048
Expansion Plug

150053048
0-30283: RNCC: 3 | RNVC: 2

7 Sep 1978

5340-15-068-1449
Angle Bracket

150681449
MC013705: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-203-7003
Flare Lock Fastener

152037003
1243: RNCC: 3 | RNVC: 2

27 Jun 2011

5340-15-144-7106
Mounting Plate

151447106
932709-001D: RNCC: 5 | RNVC: 2
932709-1: RNCC: 5 | RNVC: 2
932709-001D: RNCC: 5 | RNVC: 9
932709-1: RNCC: 5 | RNVC: 9

11 Dec 1996

5340-15-007-9951
Loop Clamp

150079951
4617069: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-000-0309
Mounting Bracket

150000309
508: RNCC: 3 | RNVC: 2
VA0103.00038: RNCC: 5 | RNVC: 2

22 Jan 2013

5340-15-193-7027
Mounting Bracket

151937027
6102330120: RNCC: 3 | RNVC: 2

2 Jul 2010

5340-15-073-5235
Rim Lock

150735235
39B75X40CR: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-127-6975
Handle Grip

151276975
5420-011: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-059-8943
Clip Retainer Plate

150598943
68536-101A1: RNCC: 3 | RNVC: 2

22 Jun 1976

5340-15-062-7932
Angle Bracket

150627932
0-34182: RNCC: 3 | RNVC: 2

28 Aug 1982

5340-15-054-8550
Retaining Clip

150548550
533-50-3180: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-073-5232
Rim Lock

150735232
39B55X24CR: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-177-4335
Mounting Bracket

151774335
051137: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-045-2942
Block Clamp

150452942
M3-4-4-4: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-111-7969
Strap Hinge

151117969
32123/3: RNCC: 3 | RNVC: 2

1 Jul 1990

5340-15-007-1883
Retaining Strap

150071883
1374881: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-112-6302
Screw Thread Insert

151126302
1176-12-116: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-060-6387
Mending Plate

150606387
27170-101: RNCC: 3 | RNVC: 2

4 Jul 1977

5340-15-117-8514
Angle Bracket

151178514
SF260-11-290-12: RNCC: 3 | RNVC: 2
SF260-11-290-12: RNCC: 5 | RNVC: 9

28 Jan 1994

5340-15-154-7590
Mounting Bracket

151547590
RAF-0478/01: RNCC: 5 | RNVC: 2
RAF-0478/01: RNCC: 5 | RNVC: 9

18 Sep 2001

5340-15-180-4556
Hook Handle

151804556
004226014V: RNCC: 3 | RNVC: 2
(241)A424942556499: RNCC: 5 | RNVC: 2
42556499: RNCC: 5 | RNVC: 2

27 May 2008

5340-15-112-3541
Strap Hinge

151123541
60150815: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-122-0631
Access Cover

151220631
238BE450-1: RNCC: 3 | RNVC: 2

23 Apr 1996

5340-15-115-9118
Butt Hinge Leaf

151159118
NOR2-481-01: RNCC: 3 | RNVC: 2

1 Feb 1993

5340-15-122-2882
Mounting Bracket

151222882
800070582: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-065-4717
Leather Strap

150654717
001101791042: RNCC: 5 | RNVC: 2
001101791042: RNCC: 5 | RNVC: 9

27 Feb 1985

5340-15-004-8029
Angle Bracket

150048029
P-110579-004: RNCC: 3 | RNVC: 2
P110579-004: RNCC: 5 | RNVC: 2

18 Jul 1978

5340-15-178-6314
Mounting Bracket

151786314
M376T: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-122-2797
Loop Clamp

151222797
800056444: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-121-2094
Loop Clamp

151212094
830605: RNCC: 3 | RNVC: 2

23 Oct 1995

5340-15-180-7079
Mounting Bracket

151807079
7-6531.041: RNCC: 3 | RNVC: 2
76531041: RNCC: 5 | RNVC: 2
CV146512: RNCC: 5 | RNVC: 2

7 Jul 2008

5340-15-065-7562
Access Door Hinge

150657562
109-0360-15-2: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-15-000-4361
Loop Clamp

150004361
425102003212: RNCC: 3 | RNVC: 2

1 Mar 2013

5340-15-156-5206
Spring Holder

151565206
21200077-25: RNCC: 3 | RNVC: 2

21 Feb 2003

5340-15-189-0150
Retaining Band

151890150
9AA8410A028-002: RNCC: 3 | RNVC: 2
(241)A21429AA8410A028-002: RNCC: 5 | RNVC: 2

15 Jan 2010

5340-15-117-3975
Tubular Fairlead

151173975
V 186-A1-53: RNCC: 3 | RNVC: 2

31 Mar 1994

5340-15-120-2180
Loop Clamp

151202180
60167778: RNCC: 3 | RNVC: 2

27 Feb 1995

5340-15-108-3107
Loop Clamp

151083107
10117301: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-179-9887
Mounting Bracket

151799887
2519006: RNCC: 3 | RNVC: 2

16 Nov 2007

5340-15-178-9417
Mounting Bracket

151789417
TN061MD010AA00: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-15-197-4509
Rim Lock

151974509
PN UAS 00004260: RNCC: 3 | RNVC: 2
9999Z90001123: RNCC: 5 | RNVC: 9

8 Apr 2004

5340-15-122-2929
Mounting Bracket

151222929
800074848: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-107-5085
Loop Clamp

151075085
8582510: RNCC: 3 | RNVC: 2
(7001)5340151075085: RNCC: 5 | RNVC: 2

30 Mar 1988

5340-15-201-2917
Stand Base

152012917
162505281: RNCC: 3 | RNVC: 2

20 Jul 2006

5340-15-118-0930
Loop Clamp

151180930
D0488339: RNCC: 3 | RNVC: 2

20 Dec 1994

5340-15-116-4981
Loop Clamp

151164981
60145450: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-118-6978
Mounting Bracket

151186978
73128393: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-109-0171
Loop Clamp

151090171
60110594: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-178-6384
Loop Clamp

151786384
2900.178.0008: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-178-9911
T Bracket

151789911
RS 305 292 A: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-118-3398
Loop Clamp

151183398
60142591: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-202-2782
Loop Clamp

152022782
17775790: RNCC: 3 | RNVC: 2
(241)A424917775790: RNCC: 5 | RNVC: 2

19 Feb 2007

5340-15-163-4009
Mounting Bracket

151634009
9844662: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-121-6281
Loop Clamp

151216281
800033279: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-178-6397
Mounting Plate

151786397
3E.F04027.1: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-063-0239
Angle Bracket

150630239
212-7510-18-1: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-073-5246
Flush Lock

150735246
13A65X55-1LEVA: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-120-2471
Catch Strike

151202471
60144945: RNCC: 3 | RNVC: 2

6 Mar 1995

5340-15-131-4976
Angle Bracket

151314976
4151740: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-118-2641
Loop Clamp

151182641
D1410484: RNCC: 3 | RNVC: 2

11 Apr 1995

5340-15-179-7381
Loop Clamp

151797381
17316599: RNCC: 3 | RNVC: 2
(241)A424917316599: RNCC: 5 | RNVC: 2

7 Jun 2007

5340-15-102-0788
Butt Hinge Leaf

151020788
213A7078-003: RNCC: 3 | RNVC: 2

29 Jul 1988

5340-15-119-1566
Mounting Bracket

151191566
75208171: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-152-7032
Mending Plate

151527032
3-83004.0000//D: RNCC: 5 | RNVC: 2
3-83004.0000//D: RNCC: 5 | RNVC: 9

17 Oct 2000

5340-15-178-6398
Mounting Plate

151786398
3E.F04026.1: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-154-3800
Loop Clamp

151543800
EN4114F08NH1: RNCC: 2 | RNVC: 2

14 May 2001

5340-15-000-4329
Retaining Band

150004329
4260025100N: RNCC: 3 | RNVC: 2

1 Mar 2013

5340-15-058-6978
Access Door Hinge

150586978
204-1500-25-1: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-107-2317
Retaining Strap

151072317
21973-101: RNCC: 3 | RNVC: 2

1 Feb 1988

5340-15-001-8409
Mounting Bracket

150018409
500431706: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-001-8404
Mounting Bracket

150018404
500424570: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-121-9877
Angle Bracket

151219877
60177346: RNCC: 3 | RNVC: 2

4 Apr 1996

5340-15-007-5160
Angle Bracket

150075160
1239-01-122: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-062-6640
Retaining Strap

150626640
0-55543: RNCC: 3 | RNVC: 2

19 Jul 1982

5340-15-062-2787
Plain Solid Disk

150622787
1127-37-178: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-060-9338
Bow Handle

150609338
F304D3-10: RNCC: 3 | RNVC: 2
F304D3-10: RNCC: 5 | RNVC: 2

22 May 1977

5340-15-107-5121
Retaining Strap

151075121
8795100: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-180-1285
Retaining Strap

151801285
0000093910836: RNCC: 3 | RNVC: 2
93910836: RNCC: 3 | RNVC: 2

28 Jan 2008

5340-15-065-7271
Access Door Hinge

150657271
109-0361-06-1: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-15-000-4359
Loop Clamp

150004359
425100801209: RNCC: 3 | RNVC: 2

1 Mar 2013

5340-15-108-5118
Strap Hinge

151085118
82199: RNCC: 3 | RNVC: 2
4696897: RNCC: 5 | RNVC: 2
04696897: RNCC: 5 | RNVC: 2

14 Jun 1988

5340-15-003-1365
Retaining Band

150031365
5949790752: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-203-1265
Protection Bellows

152031265
WTP042700119: RNCC: 3 | RNVC: 2

25 Nov 2007

5340-15-105-8486
Bow Handle

151058486
10420: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-198-9089
Caster Wheel

151989089
26HJ04143043S01-801/052: RNCC: 3 | RNVC: 2

25 Nov 2004

5340-15-057-4967
Leather Strap

150574967
TAL2700-540-1: RNCC: 3 | RNVC: 2
TAL2700-540-1: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-120-3559
Angle Bracket

151203559
60175866: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-206-8227
Mounting Bracket

152068227
ED0086361450-S: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-131-7225
Retaining Band

151317225
T237BIS: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-118-4001
Angle Bracket

151184001
60160840: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-193-1791
Retaining Band

151931791
032038: RNCC: 3 | RNVC: 2
(241)A4216032038: RNCC: 5 | RNVC: 2

20 Apr 2010

5340-15-116-0042
Rod End Clevis

151160042
66450-101A02: RNCC: 3 | RNVC: 2
66450-101A2: RNCC: 5 | RNVC: 2

15 Feb 1993

5340-15-111-6378
Loop Clamp

151116378
SF260-13-169-01: RNCC: 3 | RNVC: 2
SF260-13-169-01: RNCC: 5 | RNVC: 9

7 Sep 1989

5340-15-006-2258
Rod End Clevis

150062258
109-0041-17-3: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-108-9777
Access Cover

151089777
32-03-300: RNCC: 3 | RNVC: 2

10 Apr 1990

5340-15-206-9951
Handwheel

152069951
VH.153/74P-M12X50: RNCC: 3 | RNVC: 2
(241)A3593081409: RNCC: 5 | RNVC: 2
081409: RNCC: 5 | RNVC: 2

6 Aug 2012

5340-15-193-4614
Expansion Plug

151934614
A8659900: RNCC: 3 | RNVC: 2
(241)A4249504280937: RNCC: 5 | RNVC: 2
504280937: RNCC: 5 | RNVC: 2

13 May 2010

5340-15-114-7914
Mending Plate

151147914
8244.10.09: RNCC: 3 | RNVC: 2

12 May 1993

5340-15-062-8423
Plug Button

150628423
999-5001-10-127: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-045-3567
Retaining Strap

150453567
740-20-15: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-108-2958
Angle Bracket

151082958
60119318: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-154-4043
Angle Bracket

151544043
A6120-91094-5: RNCC: 3 | RNVC: 2

22 May 2001

5340-15-158-6030
Handle Grip

151586030
122505469: RNCC: 3 | RNVC: 2

10 Mar 2004

5340-15-121-9104
Expansion Plug

151219104
72947: RNCC: 3 | RNVC: 2
72947F01: RNCC: 3 | RNVC: 2
72947F01: RNCC: 5 | RNVC: 9

10 Jul 1996

5340-15-000-5829
Access Cover

150005829
457600000/138: RNCC: 3 | RNVC: 2

20 Mar 2013

5340-15-105-8379
Retaining Band

151058379
2640-12006: RNCC: 3 | RNVC: 2
2640-12006: RNCC: 5 | RNVC: 9

30 May 1989

5340-15-148-5794
Butt Hinge Leaf

151485794
129-0340-01-367: RNCC: 3 | RNVC: 2

31 Aug 1998

5340-15-130-1234
Handle Grip

151301234
635520: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-128-3466
Handle Grip

151283466
A78326: RNCC: 3 | RNVC: 2
A78326: RNCC: 5 | RNVC: 9

9 Oct 1996

5340-15-107-2646
Bow Handle

151072646
892.02510.247: RNCC: 5 | RNVC: 2
892.02510.247: RNCC: 5 | RNVC: 9

10 May 1989

5340-15-008-3845
Retaining Strap

150083845
4641874: RNCC: 3 | RNVC: 2
0-48898: RNCC: 5 | RNVC: 2

27 Mar 1981

5340-15-109-8799
Retaining Strap

151098799
4818807: RNCC: 3 | RNVC: 2

15 Oct 1988

5340-15-117-1465
Access Cover

151171465
T0063674: RNCC: 5 | RNVC: 2
02731H107640: RNCC: 5 | RNVC: 2
02731H107640: RNCC: 5 | RNVC: 9

10 Aug 1993

5340-15-111-3798
Strap Hinge

151113798
113A6031-001: RNCC: 3 | RNVC: 2

7 Sep 1990

5340-15-060-4912
Retaining Band

150604912
204-9000-15-1: RNCC: 3 | RNVC: 2

15 May 1977

5340-15-121-4618
Butt Hinge Leaf

151214618
213A7077-005: RNCC: 3 | RNVC: 2

21 Dec 1995

5340-15-100-1055
Access Door Hinge

151001055
P-882734-402: RNCC: 3 | RNVC: 2
P882734-402: RNCC: 5 | RNVC: 2

10 Sep 1986

5340-15-116-2055
Plain Solid Disk

151162055
120503124: RNCC: 3 | RNVC: 2

25 Mar 1993

5340-15-207-6241
Caster Wheel

152076241
1N101012615: RNCC: 3 | RNVC: 2
(241)A23091N101012615: RNCC: 5 | RNVC: 2

5 Nov 2012

5340-15-164-1350
Handle Grip

151641350
8476037: RNCC: 3 | RNVC: 2
8476037: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-118-7766
Rod End Clevis

151187766
10248271: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-063-3439
Angle Bracket

150633439
60109331: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-109-0070
Butt Hinge Leaf

151090070
1394562: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-109-3868
Rod End Connector

151093868
5137-291-17: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-121-4689
Loop Clamp

151214689
834717-10: RNCC: 3 | RNVC: 2
834717-10: RNCC: 5 | RNVC: 9

21 Dec 1995

5340-15-187-7423
Mending Plate

151877423
504254490: RNCC: 3 | RNVC: 2

5 May 2009

5340-15-120-2510
Clamping Catch

151202510
60159090: RNCC: 3 | RNVC: 2

6 Mar 1995

5340-15-118-3629
Angle Bracket

151183629
60140255: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-120-4457
Mending Plate

151204457
142503244: RNCC: 3 | RNVC: 2

25 May 1995

5340-15-150-3629
Webbing Strap

151503629
A2886000: RNCC: 3 | RNVC: 2

30 Sep 1999

5340-15-003-9069
Mounting Plate

150039069
182741027: RNCC: 3 | RNVC: 2
(241)A0199182741027: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-118-4002
Angle Bracket

151184002
60160710: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-118-9483
Mounting Bracket

151189483
75204151: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-122-2104
Loop Clamp

151222104
800034017: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-119-0680
Loop Clamp

151190680
70924648: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-000-6247
Support Hook

150006247
50030066: RNCC: 3 | RNVC: 2

25 Mar 2013

5340-15-151-1793
Loop Clamp

151511793
IAWCSK00000: RNCC: 3 | RNVC: 2

14 Apr 2000

5340-15-205-1030
Metal Grille

152051030
S2721053: RNCC: 3 | RNVC: 2
S2721053: RNCC: 5 | RNVC: 2

21 Feb 2012

5340-15-061-5572
Mending Plate

150615572
P26HC42: RNCC: 5 | RNVC: 2
P26HC42: RNCC: 5 | RNVC: 9

12 Oct 1977

5340-15-160-3174
Coat And Hat Hook

151603174
F720067091: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-150-9801
Hook Handle

151509801
369-09098-104: RNCC: 3 | RNVC: 2

17 Feb 2000

5340-15-113-9680
Padlock Eye

151139680
216A1098-001: RNCC: 3 | RNVC: 2

31 Mar 1992

5340-15-107-2547
Handle Grip

151072547
2544-000027: RNCC: 3 | RNVC: 2
2544-27: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-110-9585
Rod End Clevis

151109585
14043-101A00: RNCC: 3 | RNVC: 2
14043-101: RNCC: 5 | RNVC: 2

9 Oct 1990

5340-15-153-5211
Access Cover

151535211
142041832: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-153-3566
Hand Crank

151533566
WW205847AU: RNCC: 3 | RNVC: 2
(241)A1508WW205847AU: RNCC: 5 | RNVC: 2
WW205847AU: RNCC: 5 | RNVC: 9

19 Dec 2000

5340-15-003-7585
Loop Clamp

150037585
FA 21: RNCC: 3 | RNVC: 2

21 Nov 2013

5340-15-179-0150
Loop Clamp

151790150
3007646: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-197-1756
Rim Lock Set

151971756
PN UAS 00035682: RNCC: 3 | RNVC: 2
5340F76030753: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-005-1946
Retaining Clip

150051946
14574580: RNCC: 3 | RNVC: 2
14574580: RNCC: 5 | RNVC: 2
14574580: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-206-3511
Mounting Bracket

152063511
500402159: RNCC: 3 | RNVC: 2

4 Jun 2012

5340-15-103-0770
Retaining Band

151030770
L3617024: RNCC: 3 | RNVC: 2
(241)A5015DE160.03.266: RNCC: 5 | RNVC: 2
DE160.03.266: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-064-9289
Support Hook

150649289
11626: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-15-112-3815
Retaining Strap

151123815
00080202: RNCC: 3 | RNVC: 2

1 Jul 1990

5340-15-147-6336
Screw Thread Insert

151476336
01320250375: RNCC: 3 | RNVC: 2

5 Feb 1998

5340-15-198-5536
Filler Opening Cap

151985536
6064T39P02: RNCC: 3 | RNVC: 2
(241)A34606064T39P02: RNCC: 5 | RNVC: 2

13 Oct 2004

5340-15-148-3547
Angle Bracket

151483547
106903: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-112-3434
Spring Tension Clip

151123434
14115480: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-119-0148
Angle Bracket

151190148
70607617: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-119-0149
Angle Bracket

151190149
70611240: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-120-3290
Angle Bracket

151203290
81446: RNCC: 3 | RNVC: 2
93163994: RNCC: 5 | RNVC: 2
81446: RNCC: 5 | RNVC: 9

30 Mar 1995

5340-15-180-3854
Recess Handle

151803854
500314227: RNCC: 3 | RNVC: 2
(241)A4249500314227: RNCC: 5 | RNVC: 2

7 May 2008

5340-15-195-4797
Expansion Shield

151954797
42728649: RNCC: 3 | RNVC: 2
(241)ACA6442728649: RNCC: 5 | RNVC: 2

29 Mar 2011

5340-15-116-1477
Bow Handle

151161477
850715: RNCC: 3 | RNVC: 2
(241)A3593850715: RNCC: 5 | RNVC: 2

17 Mar 1993

5340-15-150-1013
Mounting Bracket

151501013
120009300: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-205-0566
Retaining Band

152050566
16010029: RNCC: 3 | RNVC: 2
(241)A500916010029: RNCC: 5 | RNVC: 2

16 Feb 2012

5340-15-194-7836
Mending Plate

151947836
58469: RNCC: 3 | RNVC: 2
(241)A348858469: RNCC: 5 | RNVC: 2

14 Jan 2011

5340-15-205-2496
Retaining Strap

152052496
17765791: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-107-5113
Plug Button

151075113
14507887: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-177-3408
Angle Bracket

151773408
8027318: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-163-3928
Mounting Plate

151633928
9819248: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-007-3287
Mending Plate

150073287
1276-23-610: RNCC: 3 | RNVC: 2

27 Oct 1979

5340-15-002-2840
Padlock

150022840
4116: RNCC: 3 | RNVC: 2

5 Aug 2013

5340-15-178-2409
Plain Solid Disk

151782409
6000.072: RNCC: 3 | RNVC: 2

11 Mar 2005

5340-15-151-1899
Angle Bracket

151511899
AF060180802: RNCC: 3 | RNVC: 2

14 Apr 2000

5340-15-008-3749
Retaining Strap

150083749
4725179: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-065-7248
Access Door Hinge

150657248
109-0503-27-2: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-15-179-8027
T Bracket

151798027
6-02-015: RNCC: 3 | RNVC: 2

3 Aug 2007

5340-15-062-1977
Angle Bracket

150621977
P-892822-001: RNCC: 3 | RNVC: 2
P892822-001: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-158-0068
Access Cover

151580068
1171.306-01: RNCC: 3 | RNVC: 2

15 Dec 2003

5340-15-180-6993
Padlock

151806993
3802150: RNCC: 3 | RNVC: 2
(241)A39603802150: RNCC: 5 | RNVC: 2

4 Jul 2008

5340-15-151-2245
Dashpot Piston

151512245
VA0003035: RNCC: 3 | RNVC: 2
1PA3488VA0003035: RNCC: 5 | RNVC: 2

2 May 2000

5340-15-149-3104
Angle Bracket

151493104
4885847: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-065-9804
Lock-Release Lever

150659804
W006569: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-203-7103
Mechanical Stop

152037103
21504886: RNCC: 3 | RNVC: 2

27 Jun 2011

5340-15-118-6954
Access Cover

151186954
73139422: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-000-4236
Mounting Bracket

150004236
AS-STFGNX2900: RNCC: 3 | RNVC: 2

1 Mar 2013

5340-15-109-5061
Screw Thread Insert

151095061
13582371: RNCC: 3 | RNVC: 2

13 Aug 1999

5340-15-156-8800
Loop Clamp

151568800
1470-175 5452: RNCC: 3 | RNVC: 2

10 Mar 2003

5340-15-187-3116
Retaining Band

151873116
UZ198: RNCC: 3 | RNVC: 2
(241)A9410UZ198: RNCC: 5 | RNVC: 2

11 Mar 2009

5340-15-119-1915
Mending Plate

151191915
75218568: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-168-9898
Coat And Hat Hook

151689898
F72004319: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-074-3935
Retaining Strap

150743935
B14UNAV1046A37UN1743CD: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-063-3229
Leather Strap

150633229
60108061: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-169-9255
Angle Bracket

151699255
F72019938: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-118-7538
Angle Bracket

151187538
9434388: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-107-2177
Angle Bracket

151072177
294744G1: RNCC: 3 | RNVC: 2

27 Oct 1988

5340-15-153-2606
Handle Grip

151532606
95-637MS-ZN: RNCC: 2 | RNVC: 3
122607243: RNCC: 5 | RNVC: 3

12 Dec 2000

5340-15-004-1528
Expansion Plug

150041528
1/43287/01: RNCC: 3 | RNVC: 2
1/43287/01: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-109-8674
Loop Clamp

151098674
8567698: RNCC: 3 | RNVC: 2

15 Oct 1988

5340-15-189-2607
Mounting Bracket

151892607
7500620280: RNCC: 3 | RNVC: 2
7500620280: RNCC: 5 | RNVC: 2

10 Feb 2010

5340-15-103-6808
Loop Clamp

151036808
24009492A: RNCC: 3 | RNVC: 2

26 Nov 1987

5340-15-126-7348
Handle Grip

151267348
2603-4: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-100-4956
Retaining Clip

151004956
9931/3: RNCC: 3 | RNVC: 2

13 Jul 1987

5340-15-112-3543
Strap Hinge

151123543
60150812: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-066-6089
Retaining Strap

150666089
58561: RNCC: 2 | RNVC: 2

17 Feb 1993

5340-15-152-9434
Threaded Rod End

151529434
48050000019/2: RNCC: 3 | RNVC: 2

9 Nov 2000

5340-15-118-3645
Loop Clamp

151183645
60144917: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-122-0010
Catch Strike

151220010
60178000: RNCC: 3 | RNVC: 2
(241)AF90860178000: RNCC: 5 | RNVC: 2
60178000: RNCC: 5 | RNVC: 2

10 Apr 1996

5340-15-122-0011
Catch Strike

151220011
60178001: RNCC: 3 | RNVC: 2
(241)AF90860178001: RNCC: 5 | RNVC: 2
60178001: RNCC: 5 | RNVC: 2

10 Apr 1996

5340-15-150-6736
Mounting Bracket

151506736
303196P001: RNCC: 3 | RNVC: 2

20 Dec 1999

5340-15-121-9173
Angle Bracket

151219173
4853863: RNCC: 3 | RNVC: 2

29 Mar 1996

5340-15-118-3999
Angle Bracket

151183999
60161151: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-148-3524
Mending Plate

151483524
150083: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-119-1578
Access Cover

151191578
75208189: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-151-6094
Plug Button

151516094
T202-22X1,5: RNCC: 3 | RNVC: 2

20 Jun 2000

5340-15-073-5616
Flush Lock

150735616
19880-015: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-058-6428
Rod End Clevis

150586428
206-5501-07-1: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-195-3758
Bow Handle

151953758
00.85.397.64-0004: RNCC: 3 | RNVC: 2
(241)AJ86000.85.397.64-0004: RNCC: 5 | RNVC: 2

21 Mar 2011

5340-15-178-6466
Loop Clamp

151786466
29875016: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-204-3334
Mounting Bracket

152043334
0000500428967: RNCC: 3 | RNVC: 2
(241)A39630000500428967: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-188-4983
Retaining Clip

151884983
93823917: RNCC: 3 | RNVC: 2

24 Sep 2009

5340-15-008-6129
Loop Clamp

150086129
4562651: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-160-6364
Coat And Hat Hook

151606364
F720017181: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-003-9130
Mounting Plate

150039130
182741337: RNCC: 3 | RNVC: 2
(241)A0199182741337: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-005-6840
Retaining Ring

150056840
0067: RNCC: 3 | RNVC: 2

14 Jun 1979

5340-15-149-3000
Access Cover

151493000
4885231: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-119-1445
Access Cover

151191445
73125794: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-203-1549
Latch Bar

152031549
212-1300-96-101: RNCC: 3 | RNVC: 2

27 Nov 2007

5340-15-153-3898
Mending Plate

151533898
5137-316-03: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-055-4868
Angle Bracket

150554868
00-1-04: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-121-3930
Retaining Strap

151213930
8273549: RNCC: 3 | RNVC: 2

11 Dec 1995

5340-15-000-4335
Retaining Band

150004335
4260048200N: RNCC: 3 | RNVC: 2

1 Mar 2013

5340-15-162-1546
Casement Fastener

151621546
79102564: RNCC: 3 | RNVC: 2
(241)AD75179102564: RNCC: 5 | RNVC: 2
79102564: RNCC: 5 | RNVC: 2

2 Mar 2001

5340-15-003-8973
Mounting Plate

150038973
182741074: RNCC: 3 | RNVC: 2
(241)A0199182741074: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-120-4522
Access Cover

151204522
142505155: RNCC: 3 | RNVC: 2

25 May 1995

5340-15-003-9054
Blank Panel

150039054
182753082: RNCC: 3 | RNVC: 2
(241)A0199182753082: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-004-4535
Handle Grip

150044535
S454: RNCC: 3 | RNVC: 2

30 May 1978

5340-15-110-7869
Mending Plate

151107869
60102669: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-119-4019
Angle Bracket

151194019
60173127: RNCC: 3 | RNVC: 2

25 Jul 1994

5340-15-160-8583
Coat And Hat Hook

151608583
F720023382: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-163-3831
Bridge Clamp

151633831
9454972: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-059-2707
Loop Clamp

150592707
NS4F022-1: RNCC: 3 | RNVC: 2
NS4F022-1: RNCC: 5 | RNVC: 9

18 Nov 1975

5340-15-152-2209
Mending Plate

151522209
42531933: RNCC: 3 | RNVC: 2

10 Aug 2000

5340-15-179-6764
Mounting Plate

151796764
0000500408266: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-108-2932
Angle Bracket

151082932
60135403: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-205-1792
Retaining Band

152051792
A201012: RNCC: 3 | RNVC: 2
(241)AD201A201012: RNCC: 5 | RNVC: 2

22 Feb 2012

5340-15-109-4807
Angle Bracket

151094807
1P 534149: RNCC: 3 | RNVC: 2
1P 534149: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-003-1481
Mounting Bracket

150031481
5949779059: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-009-5762
Angle Bracket

150095762
1388330: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-179-3325
Expansion Plug

151793325
D0180011A: RNCC: 3 | RNVC: 2

28 Nov 2006

5340-15-161-0222
Coat And Hat Hook

151610222
F710143161: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-151-8673
Angle Bracket

151518673
60121906: RNCC: 3 | RNVC: 2

14 Jul 2000

5340-15-163-4656
Mounting Plate

151634656
635C01230-111: RNCC: 3 | RNVC: 2

24 Sep 2002

5340-15-101-0707
Angle Bracket

151010707
328339G1: RNCC: 3 | RNVC: 2
328339G1: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-118-9125
Angle Bracket

151189125
70639669: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-152-7822
Retaining Bail

151527822
P110106: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-199-1969
Rod End Clevis

151991969
W003701900: RNCC: 3 | RNVC: 2

6 Feb 2005

5340-15-117-9096
Butt Hinge Leaf

151179096
214A2028-022: RNCC: 3 | RNVC: 2

31 Jan 1994

5340-15-089-1048
Detent Plunger

150891048
6097425: RNCC: 3 | RNVC: 2
6097425: RNCC: 3 | RNVC: 2
6153056: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-178-9218
Mounting Plate

151789218
TN163MD017AA00: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-15-195-8875
Protection Bellows

151958875
81436010126: RNCC: 3 | RNVC: 2
(241)AJ61181436010126: RNCC: 5 | RNVC: 2

23 May 2011

5340-15-112-2960
Handle Grip

151122960
005.5021: RNCC: 3 | RNVC: 2
79100537: RNCC: 5 | RNVC: 2

7 Sep 1991

5340-15-162-3708
Block Clamp

151623708
CF104: RNCC: 3 | RNVC: 2

16 Jul 2001

5340-15-178-6486
Mounting Plate

151786486
2231.069.0008: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-118-3459
Bow Handle

151183459
60142223: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-007-2602
Bow Handle

150072602
1386628: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-108-6344
Spring Tension Clip

151086344
14575380: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-153-5236
Access Cover

151535236
142065825: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-102-1032
Bail Handle

151021032
193-0487/23: RNCC: 3 | RNVC: 2

22 Jun 1986

5340-15-102-2197
Angle Bracket

151022197
109-0761-77-1: RNCC: 3 | RNVC: 2

16 Dec 1986

5340-15-177-3532
Loop Clamp

151773532
FS015-24-9: RNCC: 3 | RNVC: 2
009026AA: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-115-6897
Tubular Fairlead

151156897
V 186-A1-15: RNCC: 3 | RNVC: 2

8 Mar 1994

5340-15-053-0661
Screw Thread Insert

150530661
26T038P046: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-001-0289
Mounting Plate

150010289
504378016: RNCC: 3 | RNVC: 2

15 May 2013

5340-15-074-3957
Retaining Strap

150743957
12UNI2134CD: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-179-3257
Threaded Rod End

151793257
311066 F91: RNCC: 3 | RNVC: 2
311066 F91: RNCC: 5 | RNVC: 9

28 Nov 2006

5340-15-205-4192
Retaining Strap

152054192
178904754: RNCC: 3 | RNVC: 2
(241)A0199178904754: RNCC: 5 | RNVC: 2

8 Mar 2012

5340-15-153-5159
Access Cover

151535159
125524953: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-153-2624
Rod End Clevis

151532624
122611151: RNCC: 2 | RNVC: 3

12 Dec 2000

5340-15-001-0404
Mounting Bracket

150010404
219AE3169-129: RNCC: 3 | RNVC: 2

21 May 2013

5340-15-003-3535
Plug Button

150033535
999-5001-10-142: RNCC: 3 | RNVC: 2

4 Nov 2013

5340-15-153-9067
Mounting Bracket

151539067
9535T8: RNCC: 3 | RNVC: 2
(241)A333400085358: RNCC: 4 | RNVC: 1
00085358: RNCC: 5 | RNVC: 2

9 Mar 2001

5340-15-113-8631
Angle Bracket

151138631
1Q 532417: RNCC: 3 | RNVC: 2
1Q 532417: RNCC: 5 | RNVC: 9

21 Mar 1996

5340-15-179-6945
Mounting Bracket

151796945
0000500413640: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-020-3229
Angle Bracket

150203229
02-094H01-27: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-182-4819
Mounting Bracket

151824819
DDM7/7: RNCC: 3 | RNVC: 2
DDM7/7: RNCC: 5 | RNVC: 2

22 Dec 2008

5340-15-151-3084
Loop Clamp

151513084
541162250: RNCC: 3 | RNVC: 2
554116225000: RNCC: 5 | RNVC: 2

8 Jun 2000

5340-15-153-7432
Access Cover

151537432
142062114: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-169-1584
Coat And Hat Hook

151691584
F72008554: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-007-2527
Retaining Strap

150072527
1374227: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-052-7519
Rim Lock Set

150527519
DIS1971TAV018: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-102-4621
Loop Clamp

151024621
01-261-14-142: RNCC: 3 | RNVC: 2

13 Jul 1987

5340-15-153-3924
Mending Plate

151533924
5137-323-05: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-142-8833
Angle Bracket

151428833
109-0810-63-121: RNCC: 3 | RNVC: 2

22 Oct 1996

5340-15-109-4051
Mending Plate

151094051
5137-303-23: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-006-8171
Rod End Clevis

150068171
1732-02A: RNCC: 3 | RNVC: 2

21 Apr 1976

5340-15-007-9858
Retaining Strap

150079858
4684544: RNCC: 3 | RNVC: 2
82098: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-115-3322
Bow Handle

151153322
A81021-09-22: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-065-4869
Retaining Strap

150654869
1040-08-903: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-150-7227
Mounting Bracket

151507227
20090586: RNCC: 3 | RNVC: 2

20 Dec 1999

5340-15-059-2833
Angle Bracket

150592833
NS4F001-3: RNCC: 3 | RNVC: 2
NS4F001-3: RNCC: 5 | RNVC: 9

18 Nov 1975

5340-15-127-7175
Handle Grip

151277175
5406-1: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-118-4553
Retaining Strap

151184553
60149432: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-152-4951
Access Cover

151524951
60131090: RNCC: 3 | RNVC: 2

19 Sep 2000

5340-15-187-3044
Retaining Band

151873044
UZ82: RNCC: 3 | RNVC: 2
(241)A9410UZ82: RNCC: 5 | RNVC: 2

11 Mar 2009

5340-15-114-4877
Hand Crank

151144877
CF431635: RNCC: 3 | RNVC: 2

16 Jun 1992

5340-15-118-4018
Angle Bracket

151184018
60158740: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-194-2452
Mechanical Stop

151942452
034.0102: RNCC: 3 | RNVC: 2

19 Oct 2010

5340-15-117-9581
Cushioning Pad

151179581
78836F91: RNCC: 3 | RNVC: 2
78836F91: RNCC: 5 | RNVC: 9

20 Oct 1994

5340-15-119-0553
Expansion Plug

151190553
70921072: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-177-3974
Mounting Bracket

151773974
039851: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-150-1258
Loop Clamp

151501258
4150040: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-178-5405
Mounting Plate

151785405
1K.71.2482.3: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-074-3302
Retaining Strap

150743302
A10UNAV1046A37UN1743: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-006-8989
Rod End Clevis

150068989
39A528-12-30-02: RNCC: 3 | RNVC: 2

2 Jan 1979

5340-15-107-5146
Expansion Plug

151075146
7301976: RNCC: 3 | RNVC: 2
A040015-013: RNCC: 5 | RNVC: 2
(7001)5340151075146: RNCC: 5 | RNVC: 2

30 Mar 1988

5340-15-188-5540
Lever Bracket

151885540
300A052001-107: RNCC: 3 | RNVC: 2
(241)A3397300A052001-107: RNCC: 5 | RNVC: 2

7 Oct 2009

5340-15-178-2385
Mounting Plate

151782385
109-0811-73-107: RNCC: 3 | RNVC: 2

11 Mar 2005

5340-15-117-5258
Retaining Strap

151175258
08223-101A02: RNCC: 3 | RNVC: 2
08223-101A2: RNCC: 5 | RNVC: 2

8 Nov 1993

5340-15-199-5149
Stand Base

151995149
162505215: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-15-156-9858
Rigid Caster

151569858
(241)A3428TYPE FGK 150X50: RNCC: 3 | RNVC: 2
TYPE FGK 150X50: RNCC: 3 | RNVC: 2

31 Mar 2003

5340-15-207-1034
Access Cover

152071034
552607013000: RNCC: 3 | RNVC: 2
(241)A1140552607013000: RNCC: 5 | RNVC: 2

4 Sep 2012

5340-15-105-8386
Retaining Band

151058386
9-3630-33: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-057-7231
Angle Bracket

150577231
1276-23-440: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-062-6633
Retaining Strap

150626633
0-55117: RNCC: 3 | RNVC: 2
00055117: RNCC: 3 | RNVC: 2
(241)A39630-55117: RNCC: 5 | RNVC: 2
1PA39630-55117: RNCC: 5 | RNVC: 2

19 Jul 1982

5340-15-202-4581
Screw Thread Insert

152024581
920-0231/49: RNCC: 3 | RNVC: 2
(241)A4582920-0231/49: RNCC: 5 | RNVC: 2

27 Mar 2007

5340-15-150-1063
Mounting Bracket

151501063
120015334: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-115-3534
Mortise Lock Set

151153534
538-20-1540: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-052-0720
Retaining Band

150520720
169-8A: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-118-2041
Screw Thread Insert

151182041
13582311: RNCC: 3 | RNVC: 2

22 Apr 1994

5340-15-120-3031
Expansion Plug

151203031
16991370: RNCC: 3 | RNVC: 2

20 Mar 1995

5340-15-119-1594
Expansion Plug

151191594
75208218: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-205-4186
Retaining Strap

152054186
178904559: RNCC: 3 | RNVC: 2
(241)A0199178904559: RNCC: 5 | RNVC: 2

8 Mar 2012

5340-15-055-8675
Loop Clamp

150558675
260-13-171-01: RNCC: 3 | RNVC: 2
260-13-171-01: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-164-0972
Handle Grip

151640972
4748434: RNCC: 3 | RNVC: 2
4748434: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-118-9996
Detent Plunger

151189996
9831427: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-113-2791
Retaining Strap

151132791
08291-101B00: RNCC: 3 | RNVC: 2

30 May 1991

5340-15-107-3938
Rod End Clevis

151073938
586706: RNCC: 3 | RNVC: 2

11 Apr 1986

5340-15-009-5481
Bail Handle

150095481
3-21797D11C: RNCC: 5 | RNVC: 2
3-21797D11C: RNCC: 5 | RNVC: 9

6 Dec 1980

5340-15-073-5261
Flush Lock

150735261
73-70X58: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-045-3712
Loop Clamp

150453712
792-11-16: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-147-5958
Mounting Plate

151475958
738375-10: RNCC: 3 | RNVC: 2
738375-10: RNCC: 5 | RNVC: 9

30 Dec 1997

5340-15-000-5342
Snap Hook

150005342
99220590: RNCC: 3 | RNVC: 2

14 Mar 2013

5340-15-188-3728
Access Cover

151883728
3AN49453AAAA: RNCC: 3 | RNVC: 2

3 Sep 2009

5340-15-002-3138
Magnetic Base

150023138
504134227: RNCC: 3 | RNVC: 2

6 Aug 2013

5340-15-205-5102
Retaining Strap

152055102
178940148: RNCC: 3 | RNVC: 2
(241)A0199178940148: RNCC: 5 | RNVC: 2

15 Mar 2012

5340-15-063-3648
Bow Handle

150633648
42033166: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-062-0825
Retaining Strap

150620825
H50E23: RNCC: 5 | RNVC: 2
H50E23: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-207-0090
Mounting Bracket

152070090
4111T03G01: RNCC: 3 | RNVC: 2
(241)A34604111T03G01: RNCC: 5 | RNVC: 2

8 Aug 2012

5340-15-207-8692
Mounting Bracket

152078692
504372684: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-197-2111
Expansion Shield

151972111
PN UAS 00047198: RNCC: 3 | RNVC: 2
5930F76037939: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-117-6387
Angle Bracket

151176387
142502397: RNCC: 3 | RNVC: 2

4 Jan 1994

5340-15-061-5342
Door Handle

150615342
000200262450: RNCC: 5 | RNVC: 2
000200262450: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-120-0952
Mending Plate

151200952
93155633: RNCC: 3 | RNVC: 2

19 Dec 1994

5340-15-116-2667
Angle Bracket

151162667
190521296: RNCC: 3 | RNVC: 2

15 Apr 1993

5340-15-206-2733
Handwheel

152062733
D1432472: RNCC: 3 | RNVC: 2

1 Jun 2012

5340-15-114-0175
Access Cover

151140175
000205390650: RNCC: 5 | RNVC: 2
000205390650: RNCC: 5 | RNVC: 9

15 Apr 1992

5340-15-109-1821
Mending Plate

151091821
60102390: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-177-4784
Spring Tension Clip

151774784
F500.90677: RNCC: 3 | RNVC: 2
(241)A5863F500.90677: RNCC: 5 | RNVC: 2

26 Mar 2004

5340-15-120-2727
Retaining Strap

151202727
60169102: RNCC: 3 | RNVC: 2

9 Mar 1995

5340-15-116-1735
Plain Solid Disk

151161735
180505117: RNCC: 3 | RNVC: 2
(241)A0199180505117: RNCC: 5 | RNVC: 2

24 Mar 1993

5340-15-116-4423
Access Cover

151164423
0016210056: RNCC: 3 | RNVC: 2

6 Sep 1994

5340-15-194-7905
Lock Key

151947905
53136: RNCC: 3 | RNVC: 2
(241)A348853136: RNCC: 5 | RNVC: 2

14 Jan 2011

5340-15-177-3790
Mounting Plate

151773790
030502: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-180-3650
Access Cover

151803650
2600227: RNCC: 3 | RNVC: 2
2600227: RNCC: 5 | RNVC: 2

29 Apr 2008

5340-15-116-4766
Butt Hinge Leaf

151164766
60165662: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-118-8575
Access Cover

151188575
242109269P: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-204-4874
Mounting Bracket

152044874
219937036: RNCC: 3 | RNVC: 2
CV173703: RNCC: 5 | RNVC: 2
219937036: RNCC: 5 | RNVC: 2

7 Nov 2011

5340-15-118-1149
Spring Holder

151181149
1P 289161: RNCC: 3 | RNVC: 2
1P 289161: RNCC: 5 | RNVC: 9

30 Jan 1995

5340-15-207-8608
Mounting Bracket

152078608
5801320584: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-002-3025
Bridge Clamp

150023025
500407279: RNCC: 3 | RNVC: 2

5 Aug 2013

5340-15-103-0710
Angle Bracket

151030710
DE013.12.890: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-001-8112
Metal Grille

150018112
5949790359: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-116-4824
Angle Bracket

151164824
60169571: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-108-3257
Mending Plate

151083257
60120282: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-119-0874
Loop Clamp

151190874
70929748: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-179-1454
Loop Clamp

151791454
500305814: RNCC: 3 | RNVC: 2
(241)A4249500305814: RNCC: 5 | RNVC: 2

13 Jun 2006

5340-15-118-2028
Retaining Strap

151182028
17700401: RNCC: 3 | RNVC: 2

22 Apr 1994

5340-15-113-0121
Angle Bracket

151130121
37416646400: RNCC: 3 | RNVC: 2
93155320: RNCC: 5 | RNVC: 2

23 Feb 1989

5340-15-162-9678
Mounting Plate

151629678
6022041: RNCC: 3 | RNVC: 2

9 Apr 2002

5340-15-163-4002
Bow Handle

151634002
9844651: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-001-5692
Access Cover

150015692
SGMSGB10HCC0: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-159-1317
Rim Latch

151591317
PN UAS 00028518: RNCC: 3 | RNVC: 2
9999290000560: RNCC: 5 | RNVC: 9

31 Mar 2004

5340-15-205-1056
Mounting Bracket

152051056
504374594: RNCC: 3 | RNVC: 2

21 Feb 2012

5340-15-073-5238
Rim Lock

150735238
1447BISPARTB: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-118-3421
Loop Clamp

151183421
60144924: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-122-2153
Mounting Bracket

151222153
800054894: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-121-6219
Mounting Bracket

151216219
80A057544: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-064-3964
Loop Clamp

150643964
4037628: RNCC: 3 | RNVC: 2

6 May 1983

5340-15-122-2137
Loop Clamp

151222137
800050451: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-109-4882
Mending Plate

151094882
1Q 573809: RNCC: 3 | RNVC: 2
1Q 573809: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-135-7287
Handle Grip

151357287
5962885: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-104-4374
Expansion Plug

151044374
10159901: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-074-3974
Retaining Strap

150743974
16UNI2135CD: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-158-5454
Access Cover

151585454
122505018: RNCC: 3 | RNVC: 2

9 Mar 2004

5340-15-150-2366
Access Cover

151502366
A0121900: RNCC: 3 | RNVC: 2

27 Aug 1999

5340-15-117-4225
Handle Grip

151174225
142502143: RNCC: 3 | RNVC: 2

4 Oct 1993

5340-15-007-9149
Angle Bracket

150079149
1395597: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-000-6301
Snap Hook

150006301
7330001A1KK: RNCC: 3 | RNVC: 2

26 Mar 2013

5340-15-188-9160
Mounting Plate

151889160
3000157: RNCC: 3 | RNVC: 2

15 Dec 2009

5340-15-103-0159
Handle Grip

151030159
4977072: RNCC: 3 | RNVC: 2
4977072: RNCC: 5 | RNVC: 2

21 Jun 1987

5340-15-063-3192
Angle Bracket

150633192
60104854: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-103-1112
Leather Strap

151031112
DE013.13.372: RNCC: 3 | RNVC: 2
(241)A5015DE013.13.372: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-102-0798
Butt Hinge Leaf

151020798
213A7196-001: RNCC: 3 | RNVC: 2

29 Jul 1988

5340-15-169-7405
Coat And Hat Hook

151697405
F72018336: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-118-9433
Angle Bracket

151189433
73298045: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-194-8441
Mechanical Stop

151948441
18069: RNCC: 3 | RNVC: 2
FS0002988: RNCC: 6 | RNVC: 9

25 Jan 2011

5340-15-198-6750
Expansion Plug

151986750
230823309: RNCC: 3 | RNVC: 2

3 Nov 2004

5340-15-117-2589
Rod End Clevis

151172589
132517112: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-15-179-9903
Bow Handle

151799903
9000492: RNCC: 3 | RNVC: 2

16 Nov 2007

5340-15-179-8986
Access Cover

151798986
D1405144: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-109-0843
Angle Bracket

151090843
4779756: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-187-3016
Retaining Band

151873016
UZ35440711: RNCC: 3 | RNVC: 2
(241)A9410UZ35440711: RNCC: 5 | RNVC: 2

11 Mar 2009

5340-15-206-3344
Access Cover

152063344
4169308: RNCC: 3 | RNVC: 2

4 Jun 2012

5340-15-198-5831
T Plate

151985831
08226-101: RNCC: 3 | RNVC: 2

15 Oct 2004

5340-15-118-3784
Handle Grip

151183784
60164508: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-118-4021
Angle Bracket

151184021
60168889: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-153-2167
Threaded Rod End

151532167
122605317: RNCC: 3 | RNVC: 2

12 Dec 2000

5340-15-195-2707
Utility Access Door

151952707
4040A30STX: RNCC: 3 | RNVC: 2
4040A30STX: RNCC: 5 | RNVC: 2

9 Mar 2011

5340-15-109-7220
Angle Bracket

151097220
60141463: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-116-4902
Bow Handle

151164902
60149897: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-155-3331
Mounting Plate

151553331
500303272: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-15-007-2532
Retaining Strap

150072532
1377330: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-120-3282
Mending Plate

151203282
92300150235: RNCC: 3 | RNVC: 2
93158890: RNCC: 5 | RNVC: 2

30 Mar 1995

5340-15-153-5216
Vent Plug

151535216
142057174: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-198-2812
Mending Plate

151982812
M794093: RNCC: 3 | RNVC: 2

14 Sep 2004

5340-15-198-7859
Mounting Plate

151987859
4800586: RNCC: 3 | RNVC: 2

17 Nov 2004

5340-15-179-8213
Dashpot Piston

151798213
9457775: RNCC: 3 | RNVC: 2

3 Aug 2007

5340-15-113-0383
Angle Bracket

151130383
246-009/96T: RNCC: 3 | RNVC: 2
246-009/96T: RNCC: 5 | RNVC: 9

5 Nov 1990

5340-15-154-3526
Ball Socket Seat

151543526
107186095001: RNCC: 3 | RNVC: 2

8 May 2001

5340-15-118-4026
Angle Bracket

151184026
60167378: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-187-6307
Access Cover

151876307
500305952: RNCC: 3 | RNVC: 2

15 Apr 2009

5340-15-121-0633
Access Cover

151210633
142520923: RNCC: 3 | RNVC: 2

21 Sep 1995

5340-15-203-0319
Angle Bracket

152030319
1130101: RNCC: 3 | RNVC: 2
(241)A50091130101: RNCC: 5 | RNVC: 2

19 Nov 2007

5340-15-074-3979
Retaining Strap

150743979
8UNI2136CD: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-118-8839
Access Cover

151188839
543729911D: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-155-2788
Expansion Plug

151552788
60174747: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-15-120-4460
Mending Plate

151204460
142501262: RNCC: 3 | RNVC: 2

25 May 1995

5340-15-180-1573
Mounting Plate

151801573
2866059: RNCC: 3 | RNVC: 2

15 Feb 2008

5340-15-062-6968
Retaining Strap

150626968
4758656: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-117-2594
Vent Plug

151172594
132516232: RNCC: 3 | RNVC: 2

22 Sep 1993

Load More Results