What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 17 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 17 of 72

5340-15-110-3853
Butt Hinge Leaf

151103853
42344607: RNCC: 3 | RNVC: 2
42344607: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-152-4012
Bow Handle

151524012
00027.104: RNCC: 3 | RNVC: 2
1PA333400027104: RNCC: 5 | RNVC: 2

6 Sep 2000

5340-15-109-0069
Butt Hinge Leaf

151090069
1357943: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-061-5039
Mending Plate

150615039
P26DD35: RNCC: 5 | RNVC: 2
P26DD35: RNCC: 5 | RNVC: 9

12 Oct 1977

5340-15-003-9129
Mounting Plate

150039129
182741336: RNCC: 3 | RNVC: 2
(241)A0199182741336: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-061-2075
Detent Plunger

150612075
000200018300: RNCC: 5 | RNVC: 2
000200018300: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-187-4269
Mounting Bracket

151874269
504156792: RNCC: 3 | RNVC: 2

30 Mar 2009

5340-15-152-1678
Clamp Bolt Assembly

151521678
86002TG: RNCC: 3 | RNVC: 2
(241)A380486002TG: RNCC: 5 | RNVC: 2

9 Aug 2000

5340-15-065-1530
Angle Bracket

150651530
SC.135/143: RNCC: 3 | RNVC: 2

27 Jul 1984

5340-15-153-4151
Mending Plate

151534151
2544-275-03: RNCC: 3 | RNVC: 2

17 Jan 2001

5340-15-052-2084
Retaining Strap

150522084
B796-12-12: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-195-5939
Eye Hook

151955939
219AE3169-153: RNCC: 3 | RNVC: 2
(241)A0126219AE3169-153: RNCC: 5 | RNVC: 2

8 Apr 2011

5340-15-152-8882
Retaining Strap

151528882
190516232: RNCC: 3 | RNVC: 2

7 Nov 2000

5340-15-007-1897
Retaining Strap

150071897
1383787: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-119-1158
Access Cover

151191158
73111074: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-116-4822
Angle Bracket

151164822
60161248: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-169-1271
Coat And Hat Hook

151691271
F72006709: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-105-8975
Spring Tension Clip

151058975
2263: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-116-4846
Clamping Catch

151164846
9050600: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-058-5191
Screw Thread Insert

150585191
4-17042C: RNCC: 5 | RNVC: 2
4-17042C: RNCC: 5 | RNVC: 9

20 Sep 1974

5340-15-062-7909
Angle Bracket

150627909
0-34158: RNCC: 3 | RNVC: 2

28 Aug 1982

5340-15-154-0593
Angle Bracket

151540593
02-10-242-11-11: RNCC: 3 | RNVC: 2

19 Mar 2001

5340-15-109-1115
Mending Plate

151091115
1604B05-04: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-059-5964
Webbing Strap

150595964
000-863: RNCC: 3 | RNVC: 2

19 Sep 1975

5340-15-065-8948
Mending Plate

150658948
1127-16-486: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-118-9698
Access Cover

151189698
75207708: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-105-8404
Retaining Band

151058404
0180073: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-116-4798
Angle Bracket

151164798
60165507: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-139-7579
Handle Grip

151397579
0010703: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-122-0105
Mending Plate

151220105
60171994: RNCC: 3 | RNVC: 2

10 Apr 1996

5340-15-107-1367
Handle Grip

151071367
I.280/115-M12: RNCC: 3 | RNVC: 2
7-230093003: RNCC: 5 | RNVC: 2

14 Apr 1987

5340-15-059-4357
Angle Bracket

150594357
109-0020-37-3: RNCC: 3 | RNVC: 2

30 Jan 1976

5340-15-055-4992
Fusible Plug

150554992
TAPP0FEN031-1301: RNCC: 3 | RNVC: 2

13 Feb 1975

5340-15-045-3405
Angle Bracket

150453405
594-17-02: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-186-8323
Handle Grip

151868323
BL366/10X85: RNCC: 3 | RNVC: 2

5 Jan 2009

5340-15-061-5587
Loop Clamp

150615587
29D19A50: RNCC: 5 | RNVC: 2
29D19A50: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-119-1383
Angle Bracket

151191383
73125067: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-194-4440
Elastic Strap

151944440
11580: RNCC: 3 | RNVC: 2
(241)SQ34511580: RNCC: 5 | RNVC: 2

16 Nov 2010

5340-15-118-3998
Angle Bracket

151183998
60161148: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-062-2759
Plain Solid Disk

150622759
1141-33-114: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-122-3297
Butt Hinge Leaf

151223297
212A7106-001: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-162-1637
Screw Thread Insert

151621637
999-5000-40-110: RNCC: 3 | RNVC: 2

14 Mar 2001

5340-15-060-6072
Retaining Strap

150606072
62651-101A1: RNCC: 3 | RNVC: 2

16 Jun 1977

5340-15-109-3872
Angle Bracket

151093872
5137-277-22: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-065-7104
Angle Bracket

150657104
109-0851-78-169: RNCC: 3 | RNVC: 2

26 Jun 1985

5340-15-107-2510
Handle Grip

151072510
2544-000060: RNCC: 3 | RNVC: 2
2544-60: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-115-3524
Retaining Strap

151153524
538-16-1520: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-061-2720
Retaining Strap

150612720
CTT84-9: RNCC: 3 | RNVC: 2

18 Feb 1977

5340-15-202-4482
Luggage Handle

152024482
1550/3: RNCC: 3 | RNVC: 2
(241)A52001550/3: RNCC: 5 | RNVC: 2

25 Mar 2007

5340-15-116-7910
Plain Solid Disk

151167910
DPR24092-7: RNCC: 3 | RNVC: 2

18 Nov 1993

5340-15-179-7322
Mounting Bracket

151797322
41218294: RNCC: 3 | RNVC: 2
(241)A424941218294: RNCC: 5 | RNVC: 2

7 Jun 2007

5340-15-177-3685
Loop Clamp

151773685
017941: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-150-6012
Loop Clamp

151506012
55224: RNCC: 3 | RNVC: 2

6 Dec 1999

5340-15-197-8605
Loop Clamp

151978605
A071A018HC: RNCC: 3 | RNVC: 2

21 May 2004

5340-15-062-4085
Loop Clamp

150624085
448211 E: RNCC: 3 | RNVC: 2

1 May 1977

5340-15-153-2594
Stand Base

151532594
122606451: RNCC: 2 | RNVC: 3

12 Dec 2000

5340-15-162-3326
Bridge Clamp

151623326
5 504 02 1150 00: RNCC: 3 | RNVC: 2

27 Jun 2001

5340-15-005-9565
Mounting Bracket

150059565
W006920209: RNCC: 3 | RNVC: 2
(241)A9840W006920209: RNCC: 5 | RNVC: 2

10 Dec 2013

5340-15-153-3869
Angle Bracket

151533869
5137-300-08: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-054-8050
Angle Bracket

150548050
32-83-108: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-107-1093
Spring Holder

151071093
301-02-1420: RNCC: 3 | RNVC: 2

14 Apr 1987

5340-15-180-1636
Mounting Bracket

151801636
5830161: RNCC: 3 | RNVC: 2

15 Feb 2008

5340-15-103-1114
Leather Strap

151031114
DE013.13.375: RNCC: 3 | RNVC: 2
(241)A5015DE013.13.375: RNCC: 5 | RNVC: 2

14 Sep 1987

5340-15-155-9265
Loop Clamp

151559265
18088993: RNCC: 3 | RNVC: 2

7 Oct 2002

5340-15-187-8258
Mounting Bracket

151878258
018.067.00.38_SX: RNCC: 3 | RNVC: 2
(241)A6479018.067.00.38_SX: RNCC: 5 | RNVC: 2
018.067.00.38_SX: RNCC: 5 | RNVC: 2

7 May 2009

5340-15-061-5967
Angle Bracket

150615967
P-120097-001: RNCC: 3 | RNVC: 2
P120097-001: RNCC: 5 | RNVC: 2

2 Mar 1978

5340-15-148-5795
Butt Hinge Leaf

151485795
129-0340-27-223: RNCC: 3 | RNVC: 2

31 Aug 1998

5340-15-187-5718
Bow Handle

151875718
TAK-0160/01: RNCC: 3 | RNVC: 2

9 Apr 2009

5340-15-114-4410
Retaining Strap

151144410
4834224: RNCC: 3 | RNVC: 2

12 Jun 1992

5340-15-068-5097
Rod End Clevis

150685097
042490: RNCC: 3 | RNVC: 2

26 May 1986

5340-15-147-8752
Access Cover

151478752
131074: RNCC: 3 | RNVC: 2

18 May 1998

5340-15-109-1799
Retaining Strap

151091799
60103590: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-108-7051
Loop Clamp

151087051
10450690: RNCC: 3 | RNVC: 2
10450690: RNCC: 4 | RNVC: 1
(241)A39630-102309: RNCC: 5 | RNVC: 2
1PA39630-102309: RNCC: 5 | RNVC: 2

20 Apr 1988

5340-15-145-0123
Mending Plate

151450123
112744217: RNCC: 3 | RNVC: 2

12 May 1997

5340-15-163-4001
Bow Handle

151634001
9844650: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-109-8752
Angle Bracket

151098752
60117198: RNCC: 3 | RNVC: 2

15 Oct 1988

5340-15-000-7270
Retaining Strap

150007270
BRP-0344624: RNCC: 3 | RNVC: 2

3 Apr 2013

5340-15-148-5335
Lock-Release Lever

151485335
93191488: RNCC: 3 | RNVC: 2

13 Aug 1999

5340-15-205-1168
Runner

152051168
0011673: RNCC: 3 | RNVC: 2

21 Feb 2012

5340-15-118-3344
Retaining Strap

151183344
60146657: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-119-1422
Access Cover

151191422
73125511: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-118-8619
Access Cover

151188619
299709574C: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-066-0725
Retaining Strap

150660725
5989467: RNCC: 3 | RNVC: 2
5989467: RNCC: 5 | RNVC: 9

8 May 1985

5340-15-119-4033
Angle Bracket

151194033
60170370: RNCC: 3 | RNVC: 2

25 Jul 1994

5340-15-152-0013
Angle Bracket

151520013
60124965: RNCC: 3 | RNVC: 2

31 Jul 2000

5340-15-147-9754
Caster Wheel

151479754
694-006-8: RNCC: 3 | RNVC: 2

28 May 1998

5340-15-063-9760
Angle Bracket

150639760
SF260-05-199-11: RNCC: 3 | RNVC: 2
SF260-05-199-11: RNCC: 5 | RNVC: 9

15 Jun 1983

5340-15-109-4005
Rod End Connector

151094005
5147-009-03: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-050-5207
Handle Grip

150505207
C47-49: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-148-5796
Butt Hinge Leaf

151485796
129-0340-01-187: RNCC: 3 | RNVC: 2

31 Aug 1998

5340-15-008-9992
Angle Bracket

150089992
109-0310-16-25: RNCC: 3 | RNVC: 2

11 Jun 1981

5340-15-121-3895
Access Cover

151213895
4702389: RNCC: 3 | RNVC: 2

11 Dec 1995

5340-15-201-3086
Access Cover

152013086
162533171: RNCC: 3 | RNVC: 2

20 Jul 2006

5340-15-109-1263
Angle Bracket

151091263
60115195: RNCC: 3 | RNVC: 2

30 Apr 1988

5340-15-108-7593
Expansion Plug

151087593
10159100: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-154-0677
Angle Bracket

151540677
07-10-1122-21: RNCC: 3 | RNVC: 2

19 Mar 2001

5340-15-007-0179
Angle Bracket

150070179
000201199400: RNCC: 5 | RNVC: 2
000201199400: RNCC: 5 | RNVC: 9

8 Jan 1982

5340-15-009-3277
Angle Bracket

150093277
P-884045-002: RNCC: 3 | RNVC: 2

12 Sep 1980

5340-15-045-2922
Loop Clamp

150452922
N0R2-505-06-6B: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-112-8027
Rod End Clevis

151128027
252A1264-001: RNCC: 3 | RNVC: 2

27 Oct 1990

5340-15-121-0604
Screw Thread Insert

151210604
M3(X0.5)X2D-ACC.INOX18/8AUST.PAS: RNCC: 3 | RNVC: 2
210602561: RNCC: 5 | RNVC: 2

21 Sep 1995

5340-15-064-4167
Angle Bracket

150644167
SA8942: RNCC: 3 | RNVC: 2

30 Jan 1984

5340-15-120-0864
Angle Bracket

151200864
60176287: RNCC: 3 | RNVC: 2

19 Dec 1994

5340-15-119-1311
Angle Bracket

151191311
73123539: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-116-4782
Mending Plate

151164782
60151185: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-001-8068
Lock Key

150018068
504049195: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-003-3762
Rim Latch

150033762
64981: RNCC: 3 | RNVC: 2

5 Nov 2013

5340-15-205-5599
Mounting Bracket

152055599
ICA-PLB 126B: RNCC: 3 | RNVC: 2
(241)AH382ICA-PLB126B: RNCC: 5 | RNVC: 2

19 Mar 2012

5340-15-008-4174
Angle Bracket

150084174
SF260-18-124-11: RNCC: 3 | RNVC: 2
SF260-18-124-11: RNCC: 5 | RNVC: 9

15 Sep 1981

5340-15-065-3232
Access Door Hinge

150653232
206-1015-56-15: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-198-7792
Sliding Door Hanger

151987792
377-031-011: RNCC: 3 | RNVC: 2

17 Nov 2004

5340-15-178-2389
Rod End Clevis

151782389
109-0811-73-103: RNCC: 3 | RNVC: 2

11 Mar 2005

5340-15-060-8053
Mending Plate

150608053
018200037100: RNCC: 5 | RNVC: 2
1200096-111442003: RNCC: 5 | RNVC: 2
018200037100: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-107-9864
Angle Bracket

151079864
142-0259/14: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-179-6483
Angle Bracket

151796483
J53350620-003: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-194-2759
Mounting Bracket

151942759
109-0326-47-108: RNCC: 3 | RNVC: 2

26 Oct 2010

5340-15-053-3438
Rod End Clevis

150533438
5-13583-101-71991A1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-057-4099
Rim Lock Set

150574099
1971-030: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-155-7787
Clamping Catch

151557787
723009209400: RNCC: 1 | RNVC: 2
27-HT210-255SS: RNCC: 1 | RNVC: 2

25 Jun 2002

5340-15-063-3669
Retaining Strap

150633669
42051065: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-009-7119
Mending Plate

150097119
1236-20-102: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-104-4381
Expansion Plug

151044381
10160700: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-175-1608
Furniture Glide

151751608
COD VL 112-440: RNCC: 3 | RNVC: 2

21 Jan 2004

5340-15-108-3501
Butt Hinge Leaf

151083501
68-403011-003: RNCC: 3 | RNVC: 2

2 May 1989

5340-15-162-7738
Rod End Connector

151627738
329A01210-105: RNCC: 3 | RNVC: 2

22 Feb 2002

5340-15-111-7563
Spring Holder

151117563
56022: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-005-4028
Mending Plate

150054028
1276-06-363: RNCC: 3 | RNVC: 2
127606363: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-147-6697
Angle Bracket

151476697
206-9518-48-111: RNCC: 3 | RNVC: 2

25 Feb 1998

5340-15-063-3331
Plug Button

150633331
103690: RNCC: 3 | RNVC: 2
1/45690/87: RNCC: 3 | RNVC: 2
0-103690: RNCC: 4 | RNVC: 1
(241)A39630-103690: RNCC: 5 | RNVC: 2
14569087: RNCC: 5 | RNVC: 2

15 Oct 1982

5340-15-007-6064
Spring Tension Clip

150076064
P-110599-001: RNCC: 3 | RNVC: 2
P110599-001: RNCC: 5 | RNVC: 2

1 Mar 1980

5340-15-115-6002
Screw Thread Insert

151156002
200361870: RNCC: 3 | RNVC: 2

10 Dec 1992

5340-15-118-3854
Mending Plate

151183854
60166241: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-118-6507
Tubular Fairlead

151186507
70040758: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-109-0733
Angle Bracket

151090733
13969-102: RNCC: 3 | RNVC: 2
13969-102: RNCC: 5 | RNVC: 9

18 Dec 1989

5340-15-100-7622
Butt Hinge Leaf

151007622
109-0320-91-55: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-15-053-9985
Rod End Clevis

150539985
260-12-70-11: RNCC: 3 | RNVC: 2
260-12-70-11: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-156-3436
Hook Handle

151563436
(241)A5304ET60.00.08: RNCC: 3 | RNVC: 2
ET60.00.08: RNCC: 3 | RNVC: 2

30 Jan 2003

5340-15-194-0055
Mounting Bracket

151940055
109-0030-17-103: RNCC: 3 | RNVC: 2

12 Aug 2010

5340-15-103-8206
Handle Grip

151038206
66492-001: RNCC: 3 | RNVC: 2

12 Jan 1988

5340-15-060-2668
Mending Plate

150602668
22082-101: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-15-153-3967
Mending Plate

151533967
5137-392-08: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-100-8285
Retaining Strap

151008285
21610097A: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-119-3814
Loop Clamp

151193814
60169393: RNCC: 3 | RNVC: 2

25 Jul 1994

5340-15-008-3759
Loop Clamp

150083759
4033229: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-187-8203
Mounting Bracket

151878203
018.066.00.39: RNCC: 3 | RNVC: 2
(241)A6479018.066.00.39: RNCC: 5 | RNVC: 2
018.066.00.39: RNCC: 5 | RNVC: 2

7 May 2009

5340-15-203-6765
Mounting Bracket

152036765
504383646: RNCC: 3 | RNVC: 2

24 Jun 2011

5340-15-204-0283
Mounting Bracket

152040283
154227401: RNCC: 3 | RNVC: 2

19 Aug 2011

5340-15-109-1847
Angle Bracket

151091847
60102833: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-204-3251
Butt Hinge

152043251
0000500429986: RNCC: 3 | RNVC: 2
(241)A39630000500429986: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-007-9860
Retaining Strap

150079860
4641876: RNCC: 3 | RNVC: 2
0-48350: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-194-8371
Mortise Lock Set

151948371
ELETTRIKA: RNCC: 1 | RNVC: 2
(241)A3319ELETTRIKA: RNCC: 3 | RNVC: 2

24 Jan 2011

5340-15-131-0312
Angle Bracket

151310312
541258: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-121-8860
Angle Bracket

151218860
206-7135-24-1: RNCC: 3 | RNVC: 2

19 Mar 1996

5340-15-059-2261
Rim Lock

150592261
1971-039: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-057-5777
Retaining Strap

150575777
72-013-110: RNCC: 3 | RNVC: 2
72-013-110: RNCC: 5 | RNVC: 9

26 Nov 1972

5340-15-137-2300
Handle Grip

151372300
204-001-202-3: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-162-3367
Bridge Clamp

151623367
LAB-B1-122000: RNCC: 3 | RNVC: 2

27 Jun 2001

5340-15-113-1071
Loop Clamp

151131071
HD 1300-4: RNCC: 3 | RNVC: 2

7 Oct 1994

5340-15-180-1284
Retaining Strap

151801284
93907602: RNCC: 3 | RNVC: 2
0000093907602: RNCC: 3 | RNVC: 2

28 Jan 2008

5340-15-151-4191
Angle Bracket

151514191
0-102269: RNCC: 3 | RNVC: 2

23 May 2000

5340-15-180-1469
Mounting Bracket

151801469
120020229: RNCC: 3 | RNVC: 2

15 Feb 2008

5340-15-118-3884
Strap Hinge

151183884
60161517: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-045-2851
Loop Clamp

150452851
N0R2-505-05-19B: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-063-2518
Butt Hinge Leaf

150632518
A1-23001-781: RNCC: 3 | RNVC: 2
A1-23001-781: RNCC: 5 | RNVC: 9

28 Jan 1983

5340-15-117-3973
Tubular Fairlead

151173973
B-3/4''X20/14: RNCC: 3 | RNVC: 2

31 Mar 1994

5340-15-008-2528
Loop Clamp

150082528
101-16-02: RNCC: 3 | RNVC: 2

1 Feb 1982

5340-15-103-5084
Loop Clamp

151035084
808-73373-3: RNCC: 3 | RNVC: 2

9 Apr 1988

5340-15-102-1517
Handle Grip

151021517
BL36-14X160: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-118-7494
Mounting Bracket

151187494
9433578: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-163-3806
Bridge Clamp

151633806
9449150: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-119-0846
Loop Clamp

151190846
70928654: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-177-3900
Mounting Bracket

151773900
035488: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-170-9023
Loop Clamp

151709023
71431617: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-073-5251
Flush Lock

150735251
13A65X100-1LEVA: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-177-3938
Mounting Bracket

151773938
036902: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-107-6602
Access Cover

151076602
0804401: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-052-0379
Loop Clamp

150520379
M781-20-75-13: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-052-2626
Angle Bracket

150522626
B834-12-22: RNCC: 3 | RNVC: 2

5 Feb 1973

5340-15-204-1360
Mounting Bracket

152041360
HY-CM20B: RNCC: 3 | RNVC: 2
CM-20B: RNCC: 3 | RNVC: 2
(241)S3820HY-CM20B: RNCC: 5 | RNVC: 2
(241)AJ859CM-20B: RNCC: 5 | RNVC: 2

9 Sep 2011

5340-15-116-7143
Access Door Hinge

151167143
109-0311-65-103: RNCC: 3 | RNVC: 2

23 Jun 1993

5340-15-065-7275
Access Door Hinge

150657275
109-0361-07-1: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-15-178-3805
Cushioning Pad

151783805
GN6311.1-20-K: RNCC: 3 | RNVC: 2

29 Apr 2005

5340-15-108-0800
Angle Bracket

151080800
32-03-318: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-000-4810
Pipe Hanger

150004810
71418596: RNCC: 3 | RNVC: 2
71418596: RNCC: 5 | RNVC: 2

11 Mar 2013

5340-15-155-1288
Bail Handle

151551288
142050311: RNCC: 3 | RNVC: 2
IR.302-65: RNCC: 3 | RNVC: 2

18 Jan 2002

5340-15-195-8220
Mounting Bracket

151958220
123/02663: RNCC: 3 | RNVC: 2
(241)A6479123/02663: RNCC: 5 | RNVC: 2

17 May 2011

5340-15-108-8377
Mending Plate

151088377
02558-2: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-131-3817
Angle Bracket

151313817
140-20-48-047-00: RNCC: 3 | RNVC: 2
140-20-48-047-00: RNCC: 5 | RNVC: 9

9 Oct 1996

5340-15-114-0545
Webbing Strap

151140545
2500066: RNCC: 3 | RNVC: 2
NU-ACC-VA A012: RNCC: 3 | RNVC: 2

17 Apr 1992

5340-15-157-0624
Flush Lock

151570624
DIS.629 MARINARSEN SP SERRATURA: RNCC: 3 | RNVC: 2

28 Apr 2003

5340-15-117-6763
Rod End Clevis

151176763
65148-101: RNCC: 3 | RNVC: 2
65148-101A00: RNCC: 5 | RNVC: 2

10 Jan 1994

5340-15-198-0722
Protection Bellows

151980722
C1-PSC925DA-SR: RNCC: 3 | RNVC: 2
(241)A3121C1-PSC925DA-SR: RNCC: 5 | RNVC: 2

10 Jun 2004

5340-15-112-0869
Angle Bracket

151120869
02-10-242-11-9: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-004-3109
Spring Tension Clip

150043109
63551-6: RNCC: 3 | RNVC: 2

24 Jan 1978

5340-15-110-9855
Screw Thread Insert

151109855
SL10253-08: RNCC: 3 | RNVC: 2

12 Sep 1990

5340-15-007-0576
Lock-Release Lever

150070576
1137-07-012: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-109-3749
Angle Bracket

151093749
5137-279-15: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-008-1669
Screw Thread Insert

150081669
A04-10095-137: RNCC: 5 | RNVC: 2
A04-10095-137: RNCC: 5 | RNVC: 9
A04-10095-137: RNCC: 5 | RNVC: 9

10 May 1981

5340-15-157-9325
Door Handle

151579325
0-110315: RNCC: 3 | RNVC: 2
(241)A39630-110315: RNCC: 5 | RNVC: 2
1PA39630-110315: RNCC: 5 | RNVC: 2

25 Nov 2003

5340-15-156-8090
Butt Hinge

151568090
94UJ04343196S01-412: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-15-116-7776
Loop Clamp

151167776
D25-COMP37: RNCC: 3 | RNVC: 2

21 Apr 1994

5340-15-052-0380
Loop Clamp

150520380
M781-20-76: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-059-5248
Leather Strap

150595248
TAL27700-530-1: RNCC: 3 | RNVC: 2
TAL27700-530-1: RNCC: 5 | RNVC: 9

2 Mar 1976

5340-15-073-5621
Flush Lock

150735621
19880-040: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-001-3463
Access Cover

150013463
928-0924/01: RNCC: 3 | RNVC: 2

17 Jun 2013

5340-15-118-7343
Mounting Bracket

151187343
73128220: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-118-4827
Mending Plate

151184827
02.1005.B.04: RNCC: 3 | RNVC: 2
02.1005.B.04: RNCC: 5 | RNVC: 9

7 Feb 1995

5340-15-063-8150
Access Door Hinge

150638150
109-0503-16-5: RNCC: 3 | RNVC: 2

3 Sep 1983

5340-15-056-0048
Retaining Strap

150560048
10UNI2135A34-2633CDCR: RNCC: 2 | RNVC: 2
240032985: RNCC: 5 | RNVC: 2
2400-32-985: RNCC: 5 | RNVC: 2

5 Apr 1994

5340-15-061-4116
Angle Bracket

150614116
P-125079-001: RNCC: 3 | RNVC: 2
P125079-001: RNCC: 5 | RNVC: 2

19 Jan 1978

5340-15-158-5078
Mending Plate

151585078
0-110580: RNCC: 3 | RNVC: 2
1PA39630-110580: RNCC: 5 | RNVC: 2

22 Feb 2004

5340-15-103-2681
Loop Clamp

151032681
5137-218-00: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-003-1070
Access Cover

150031070
182719086: RNCC: 3 | RNVC: 2
(241)A0199182719086: RNCC: 5 | RNVC: 2

25 Oct 2013

5340-15-063-7283
Mending Plate

150637283
40.24.01.311: RNCC: 3 | RNVC: 2
19.11.41.00: RNCC: 5 | RNVC: 2

9 Jun 1983

5340-15-189-9444
Retaining Band

151899444
UA2902204P: RNCC: 3 | RNVC: 2
(241)A2142UA29022-04P: RNCC: 5 | RNVC: 2

1 Mar 2010

5340-15-148-5220
Hook Handle

151485220
98472413: RNCC: 3 | RNVC: 2

13 Aug 1999

5340-15-054-8182
Rod End Clevis

150548182
6189135: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-107-2045
Vent Plug

151072045
4255313: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-164-8900
Handle Grip

151648900
0500504: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-008-3590
Webbing Strap

150083590
330-0244/02: RNCC: 3 | RNVC: 2

4 May 1981

5340-15-157-4256
Rod End Clevis

151574256
21505846: RNCC: 3 | RNVC: 2

14 Jul 2003

5340-15-195-1932
Strap Hinge Leaf

151951932
A7830P1: RNCC: 3 | RNVC: 2

7 Mar 2011

5340-15-103-0010
Rod End Clevis

151030010
79037030: RNCC: 3 | RNVC: 2

21 Jun 1987

5340-15-109-1846
Angle Bracket

151091846
60109614: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-197-2110
Expansion Shield

151972110
PN UAS 00047195: RNCC: 3 | RNVC: 2
5930F76037936: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-198-6350
Metal Grille

151986350
2103.1010: RNCC: 3 | RNVC: 2
(241)A49782103.1010: RNCC: 5 | RNVC: 2
W111136P1: RNCC: 5 | RNVC: 2

22 Oct 2004

5340-15-204-9005
Access Cover

152049005
71.1501.22: RNCC: 3 | RNVC: 2

25 Jan 2012

5340-15-188-7651
Drift Bolt

151887651
MOR3536240CH: RNCC: 3 | RNVC: 2
(241)AG622MOR3536240CH: RNCC: 5 | RNVC: 2

13 Nov 2009

5340-15-116-4745
Butt Hinge Leaf

151164745
60166447: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-109-1855
Catch Strike

151091855
60102666: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-108-7603
Angle Bracket

151087603
60137759: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-109-3981
Mending Plate

151093981
5137-370-07: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-187-1937
Retaining Band

151871937
MFP76.280: RNCC: 3 | RNVC: 2
(241)A3980MFP76.280: RNCC: 5 | RNVC: 2

24 Feb 2009

5340-15-121-9876
Angle Bracket

151219876
60178566: RNCC: 3 | RNVC: 2

4 Apr 1996

5340-15-199-7715
Access Cover

151997715
19373-1: RNCC: 3 | RNVC: 2
T0020392: RNCC: 5 | RNVC: 2
(241)A081019373-1: RNCC: 5 | RNVC: 2

23 May 2005

5340-15-117-3974
Tubular Fairlead

151173974
V 186-A1-50: RNCC: 3 | RNVC: 2

31 Mar 1994

5340-15-100-8099
Butt Hinge Leaf

151008099
109-0640-50-145: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-15-100-8097
Butt Hinge Leaf

151008097
109-0640-50-143: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-15-101-3361
Butt Hinge Leaf

151013361
G610-12-24-04: RNCC: 3 | RNVC: 2

1 Dec 1987

5340-15-129-7107
Handle Grip

151297107
9261283: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-118-3342
Retaining Strap

151183342
60146870: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-150-2363
Access Cover

151502363
A0121600: RNCC: 3 | RNVC: 2

27 Aug 1999

5340-15-180-3649
Access Cover

151803649
2600226: RNCC: 3 | RNVC: 2
2600226: RNCC: 5 | RNVC: 2

29 Apr 2008

5340-15-108-6270
Retaining Strap

151086270
93918542: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-193-8963
Mounting Bracket

151938963
109-0601-79-159: RNCC: 3 | RNVC: 2

26 Jul 2010

5340-15-170-8860
Door Closer

151708860
A015.125.207: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-118-3373
Angle Bracket

151183373
60142117: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-198-5847
Block Clamp

151985847
AIT13901HHEG7377: RNCC: 3 | RNVC: 2

15 Oct 2004

5340-15-153-9049
Mounting Bracket

151539049
00084226: RNCC: 3 | RNVC: 2
(241)A333400084226: RNCC: 4 | RNVC: 1
9422T6: RNCC: 5 | RNVC: 2

9 Mar 2001

5340-15-057-9815
Access Door Hinge

150579815
A1-23551-011: RNCC: 3 | RNVC: 2
A1-23551-011: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-007-1900
Retaining Strap

150071900
1384222: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-205-2251
Padlock

152052251
11400010: RNCC: 3 | RNVC: 2
(241)A415511400010: RNCC: 5 | RNVC: 2

28 Feb 2012

5340-15-007-7685
Bow Handle

150077685
60106460: RNCC: 3 | RNVC: 2
60106460: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-195-6469
Recess Handle

151956469
WMP053000462: RNCC: 3 | RNVC: 2

13 Apr 2011

5340-15-120-0218
Catch Strike

151200218
8280915: RNCC: 3 | RNVC: 2

5 Dec 1994

5340-15-063-0856
Ball Socket Seat

150630856
8836427: RNCC: 3 | RNVC: 2

15 Jun 1982

5340-15-002-8098
Mounting Plate

150028098
504383233: RNCC: 3 | RNVC: 2

3 Oct 2013

5340-15-193-9633
Mounting Bracket

151939633
109-0614-41-101: RNCC: 3 | RNVC: 2

5 Aug 2010

5340-15-112-8015
Rod End Clevis

151128015
345A3348-001: RNCC: 3 | RNVC: 2

27 Oct 1990

5340-15-061-1721
Clip Retainer Plate

150611721
05173-001A1: RNCC: 3 | RNVC: 2

17 Oct 1977

5340-15-194-3555
Block Clamp

151943555
109-0519-24-101: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-15-151-2301
Filler Opening Cap

151512301
00085181: RNCC: 3 | RNVC: 2

3 May 2000

5340-15-175-0810
Cushioning Pad

151750810
185312149A01: RNCC: 3 | RNVC: 2

29 Dec 2003

5340-15-152-1033
Angle Bracket

151521033
60139408: RNCC: 3 | RNVC: 2

7 Aug 2000

5340-15-053-5630
Leather Strap

150535630
02-231E35: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-001-5414
Mending Plate

150015414
182703111: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-15-103-0975
Door Handle

151030975
DE013.13.413: RNCC: 3 | RNVC: 2
(241)A5015DE013.13.413: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-103-3490
Vent Plug

151033490
SF60: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-162-1807
Mounting Bracket

151621807
SF260-05-405-2: RNCC: 3 | RNVC: 2
SF260-05-405-2: RNCC: 5 | RNVC: 9

3 Apr 2001

5340-15-100-2545
Butt Hinge Leaf

151002545
39A1151-05-02: RNCC: 3 | RNVC: 2

6 Dec 1986

5340-15-104-4350
Expansion Plug

151044350
45-8990-05: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-058-3843
Rim Lock

150583843
1971-038: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-063-3533
Mending Plate

150633533
60117548: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-113-8622
Angle Bracket

151138622
1P 578411: RNCC: 3 | RNVC: 2
1P 578411: RNCC: 5 | RNVC: 9

21 Mar 1996

5340-15-063-6178
Retaining Strap

150636178
4718548: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-063-2731
Angle Bracket

150632731
60104853: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-195-8897
Mechanical Stop

151958897
A9066840089: RNCC: 3 | RNVC: 2
(241)AJ611A9066840089: RNCC: 5 | RNVC: 2

23 May 2011

5340-15-169-6241
Coat And Hat Hook

151696241
F72015814: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-154-1968
Angle Bracket

151541968
0-166399: RNCC: 3 | RNVC: 2
(241)A39630-166399: RNCC: 5 | RNVC: 2
1PA39630-166399: RNCC: 5 | RNVC: 2

28 Mar 2001

5340-15-150-3482
Mounting Bracket

151503482
60-12823-01: RNCC: 3 | RNVC: 2

29 Sep 1999

5340-15-118-3670
Mending Plate

151183670
60144920: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-045-0213
Retaining Clip

150450213
1310-20-08: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-179-2688
Access Cover

151792688
109-0816-38-119: RNCC: 3 | RNVC: 2

10 Aug 2006

5340-15-004-3916
Angle Bracket

150043916
P11284-001: RNCC: 3 | RNVC: 2

27 Jun 1978

5340-15-100-7621
Butt Hinge Leaf

151007621
109-0320-91-56: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-15-110-8322
Threaded Rod End

151108322
39A526-12-23A: RNCC: 3 | RNVC: 2

14 Jun 1990

5340-15-064-6653
Angle Bracket

150646653
2-4752-101-40393-5: RNCC: 3 | RNVC: 2

30 Jul 1984

5340-15-119-1870
Retaining Strap

151191870
75214900: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-117-7054
Retaining Strap

151177054
D9103018P: RNCC: 3 | RNVC: 2
D9103018P: RNCC: 5 | RNVC: 9

9 Jan 1995

5340-15-119-9650
Vent Plug

151199650
73365F92: RNCC: 3 | RNVC: 2
73365F92: RNCC: 5 | RNVC: 9

22 May 1996

5340-15-153-5210
Access Cover

151535210
142041818: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-187-6212
Retaining Clip

151876212
OR/PC: RNCC: 3 | RNVC: 2
(241)AH405OR/PC: RNCC: 5 | RNVC: 2

15 Apr 2009

5340-15-054-1321
Rod End Clevis

150541321
260-14-47-02: RNCC: 3 | RNVC: 2
260-14-47-02: RNCC: 5 | RNVC: 9

31 Dec 1970

5340-15-100-1506
Angle Bracket

151001506
P-883019-001: RNCC: 3 | RNVC: 2
P883019-001: RNCC: 5 | RNVC: 2

22 Oct 1986

5340-15-062-2907
Expansion Plug

150622907
95146/164: RNCC: 3 | RNVC: 2
9937286: RNCC: 5 | RNVC: 2
95146/164: RNCC: 5 | RNVC: 9
9937286: RNCC: 5 | RNVC: 9

29 Sep 1982

5340-15-201-6964
Pawl Fastener

152016964
5007-20: RNCC: 3 | RNVC: 2

20 Nov 2006

5340-15-207-4129
Loop Clamp

152074129
NS4F011-3B: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-15-193-8591
Lock Key

151938591
TR261434-0001: RNCC: 3 | RNVC: 2
(241)AH724TR261434-0001: RNCC: 5 | RNVC: 2

21 Jul 2010

5340-15-004-7540
Angle Bracket

150047540
P-160318-002: RNCC: 3 | RNVC: 2
P160318-002: RNCC: 5 | RNVC: 2

13 Jul 1978

5340-15-195-0420
Shelf Bracket

151950420
D223238: RNCC: 3 | RNVC: 2
(241)AA023D223238: RNCC: 5 | RNVC: 2

17 Feb 2011

5340-15-179-9014
Mounting Plate

151799014
D1403321: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-162-7744
Clip Retainer Plate

151627744
329A01355-101: RNCC: 3 | RNVC: 2

22 Feb 2002

5340-15-117-7180
Access Cover

151177180
1Z 602512LA: RNCC: 3 | RNVC: 2
1Z 602512LA: RNCC: 5 | RNVC: 9

23 Jan 1995

5340-15-120-8115
Angle Bracket

151208115
126580: RNCC: 3 | RNVC: 2

4 Jul 1996

5340-15-178-6481
Mounting Plate

151786481
2231.069.0009: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-105-8380
Retaining Band

151058380
002.0387.0: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-007-5313
Rod End Clevis

150075313
1239-03-115: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-154-0209
Loop Clamp

151540209
73208A071002: RNCC: 5 | RNVC: 2
73208A071002: RNCC: 5 | RNVC: 9

15 Mar 2001

5340-15-117-8399
Loop Clamp

151178399
55.18.05: RNCC: 3 | RNVC: 2

28 Jan 1994

5340-15-003-3763
Rim Lock

150033763
64967: RNCC: 3 | RNVC: 2

5 Nov 2013

5340-15-110-3869
Spring Tension Clip

151103869
4105291: RNCC: 3 | RNVC: 2
04105291: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-066-0706
Bow Handle

150660706
4436868: RNCC: 3 | RNVC: 2
4436868: RNCC: 5 | RNVC: 9

8 May 1985

5340-15-067-6906
Angle Bracket

150676906
513126: RNCC: 2 | RNVC: 2
513126: RNCC: 5 | RNVC: 9

1 Apr 1998

5340-15-058-5399
Angle Bracket

150585399
3T98167-1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-150-0884
Loop Clamp

151500884
016020010: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-007-5434
Lock-Release Lever

150075434
1239-06-106: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-061-6118
Door Handle

150616118
000200258450: RNCC: 5 | RNVC: 2
000200258450: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-103-6689
Retaining Band

151036689
24009321A: RNCC: 3 | RNVC: 2

26 Nov 1987

5340-15-163-0251
Protection Bellows

151630251
ELTR10411: RNCC: 3 | RNVC: 2

14 May 2002

5340-15-117-4206
Mending Plate

151174206
132507159: RNCC: 3 | RNVC: 2

4 Oct 1993

5340-15-009-1417
Catch Strike

150091417
4674929: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-201-1759
Mending Plate

152011759
N937G3003201: RNCC: 3 | RNVC: 2
(241)A0126N937G3003201: RNCC: 5 | RNVC: 2

12 Jun 2006

5340-15-119-0478
Expansion Plug

151190478
70917628: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-103-1014
Loop Clamp

151031014
DE013.13.612: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-195-7964
Mounting Bracket

151957964
341177: RNCC: 3 | RNVC: 2
(241)AJ611341177: RNCC: 5 | RNVC: 2

16 May 2011

5340-15-118-7692
Mounting Bracket

151187692
4732530: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-150-1011
Mounting Bracket

151501011
120002135: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-122-2814
Protection Bellows

151222814
800057758: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-007-2192
Angle Bracket

150072192
1395934: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-065-3214
Catch Strike

150653214
P-894876-001: RNCC: 3 | RNVC: 2
P894876-001: RNCC: 5 | RNVC: 2

19 Feb 1985

5340-15-152-3485
Angle Bracket

151523485
0-153328: RNCC: 3 | RNVC: 2
00153328: RNCC: 3 | RNVC: 2
(241)A39630-153328: RNCC: 5 | RNVC: 2
1PA39630-153328: RNCC: 5 | RNVC: 2

4 Sep 2000

5340-15-120-6641
Handle Grip

151206641
S403/NERA: RNCC: 3 | RNVC: 2

28 Jun 1996

5340-15-064-4305
Angle Bracket

150644305
P8442650-001: RNCC: 3 | RNVC: 2

10 Jul 1984

5340-15-109-9566
Retaining Strap

151099566
11816-102A00: RNCC: 3 | RNVC: 2
11816-102: RNCC: 5 | RNVC: 2

14 Mar 1990

5340-15-052-2223
Loop Clamp

150522223
N0R2-505-05-12B: RNCC: 3 | RNVC: 2

15 Jun 1971

5340-15-062-9018
Retaining Strap

150629018
0-42308: RNCC: 3 | RNVC: 2

9 Jul 1981

5340-15-118-3841
Loop Clamp

151183841
60160969: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-108-3119
Angle Bracket

151083119
60120790: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-199-5244
Butt Hinge

151995244
0213-47761: RNCC: 3 | RNVC: 2

14 Apr 2005

5340-15-180-8269
Mounting Plate

151808269
1407541: RNCC: 3 | RNVC: 2

25 Jul 2008

5340-15-060-4651
Butt Hinge

150604651
1376-31-014: RNCC: 3 | RNVC: 2
137631014: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-103-2443
Access Cover

151032443
538-26-1240: RNCC: 3 | RNVC: 2

11 Jan 1989

5340-15-061-4748
Clip Retainer Plate

150614748
P135085-001: RNCC: 3 | RNVC: 2

30 Jan 1978

5340-15-120-1975
Butt Hinge Leaf

151201975
212A7102-001: RNCC: 3 | RNVC: 2

31 Jan 1995

5340-15-116-8616
Tubular Fairlead

151168616
V 186-A1-39: RNCC: 3 | RNVC: 2

8 Apr 1994

5340-15-117-3976
Tubular Fairlead

151173976
V 186-A1-18: RNCC: 3 | RNVC: 2
D0566904: RNCC: 5 | RNVC: 2

31 Mar 1994

5340-15-058-6427
Rod End Clevis

150586427
206-5501-26-1: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-199-1758
Loop Clamp

151991758
UA29011-01P: RNCC: 3 | RNVC: 2

24 Jan 2005

5340-15-065-1235
Bow Handle

150651235
B515/M-CB-018: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-201-4324
Roller Holder

152014324
500534916: RNCC: 3 | RNVC: 2
(241)A9172500534916: RNCC: 5 | RNVC: 2

5 Sep 2006

5340-15-062-6102
Loop Clamp

150626102
4639000: RNCC: 3 | RNVC: 2

17 Oct 1981

5340-15-187-2174
Mounting Bracket

151872174
179202010: RNCC: 3 | RNVC: 2
(241)A0199179202010: RNCC: 5 | RNVC: 2

25 Feb 2009

5340-15-152-7867
Mounting Bracket

151527867
P120625: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-101-4439
Loop Clamp

151014439
C 8: RNCC: 3 | RNVC: 2

8 Jun 1987

5340-15-007-2177
Loop Clamp

150072177
1392190: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-197-1754
Rim Lock Set

151971754
PN UAS 00037052: RNCC: 3 | RNVC: 2
5340F76031819: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-179-7156
Loop Clamp

151797156
0000500401798: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-008-6535
Plain Solid Disk

150086535
1236-61-100: RNCC: 3 | RNVC: 2

16 Nov 1987

5340-15-157-6149
Angle Bracket

151576149
11031204: RNCC: 3 | RNVC: 2
(241)A977211031204: RNCC: 5 | RNVC: 2

9 Oct 2003

5340-15-120-4471
Mending Plate

151204471
142501149: RNCC: 3 | RNVC: 2

25 May 1995

5340-15-150-1116
Access Cover

151501116
771140040: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-133-0733
Lever Bracket

151330733
82153414: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-194-5635
Snap Hook

151945635
786.A1: RNCC: 3 | RNVC: 2

10 Dec 2010

5340-15-074-4005
Retaining Strap

150744005
12UNI2138: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-008-1838
Angle Bracket

150081838
60114548: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-051-6973
Retaining Strap

150516973
01-237E145: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-179-9550
Mounting Bracket

151799550
0000098197704: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-199-5003
Loop Clamp

151995003
1Q 609780LA: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-15-152-7879
Mounting Bracket

151527879
P121120: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-117-6760
Retaining Strap

151176760
20974-101B00: RNCC: 3 | RNVC: 2

10 Jan 1994

5340-15-153-8425
Retaining Band

151538425
06200A135940: RNCC: 5 | RNVC: 3
06200A135940: RNCC: 5 | RNVC: 9

2 Mar 2001

5340-15-061-4171
Angle Bracket

150614171
P135053-002: RNCC: 3 | RNVC: 2

20 Jan 1978

5340-15-073-5266
Flush Lock

150735266
73-70X83: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-189-4253
Mounting Plate

151894253
765050-10: RNCC: 3 | RNVC: 2

19 Feb 2010

5340-15-005-0457
Webbing Strap

150050457
0-33364: RNCC: 3 | RNVC: 2
00033364: RNCC: 4 | RNVC: 1
(241)A396300033364: RNCC: 5 | RNVC: 2

7 Sep 1977

5340-15-152-2475
T Plate

151522475
D22 D829 01P: RNCC: 3 | RNVC: 2

17 Aug 2000

5340-15-150-0886
Loop Clamp

151500886
016020025: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-008-3760
Loop Clamp

150083760
4624405: RNCC: 3 | RNVC: 2

1 Feb 1996

5340-15-115-3523
Retaining Strap

151153523
538-24-1000: RNCC: 3 | RNVC: 2

26 Jun 1996

5340-15-181-2815
Elastic Strap

151812815
FT0004784894: RNCC: 3 | RNVC: 2
(241)A3488FT0004784894: RNCC: 5 | RNVC: 2

24 Nov 2008

5340-15-157-5183
Flush Catch

151575183
A185A040A072: RNCC: 3 | RNVC: 2

12 Sep 2003

5340-15-205-4203
Retaining Strap

152054203
178905230: RNCC: 3 | RNVC: 2
(241)A0199178905230: RNCC: 5 | RNVC: 2

8 Mar 2012

5340-15-109-3980
Angle Bracket

151093980
5137-353-02: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-110-8545
Screw Thread Insert

151108545
2106-02512: RNCC: 3 | RNVC: 2
M 12 X175 1D: RNCC: 5 | RNVC: 2

30 Jan 1990

5340-15-040-2238
Angle Bracket

150402238
2-2835-100-24564-1: RNCC: 3 | RNVC: 2
2-2835-1-00-24564-1: RNCC: 5 | RNVC: 2

29 Sep 1975

5340-15-100-8095
Butt Hinge Leaf

151008095
109-0640-50-141: RNCC: 3 | RNVC: 2

27 Oct 1986

5340-15-116-7488
Mounting Plate

151167488
538-08-1090: RNCC: 3 | RNVC: 2

24 Jun 1993

5340-15-004-2855
Retaining Strap

150042855
68152-101A1: RNCC: 3 | RNVC: 2

24 Feb 1978

5340-15-055-1342
Handle Grip

150551342
91543-27: RNCC: 3 | RNVC: 2

6 Apr 1972

5340-15-107-5341
Retaining Strap

151075341
SR 1870: RNCC: 3 | RNVC: 2

22 Mar 1988

5340-15-107-5131
Expansion Plug

151075131
1398490: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-120-2977
Expansion Plug

151202977
98412737: RNCC: 3 | RNVC: 2

13 Mar 1995

5340-15-152-1205
Angle Bracket

151521205
60145429: RNCC: 3 | RNVC: 2

7 Aug 2000

5340-15-118-3397
Loop Clamp

151183397
60142932: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-149-5861
Mounting Plate

151495861
109-0326-26-104: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-120-2488
Retaining Strap

151202488
98485520: RNCC: 3 | RNVC: 2

6 Mar 1995

5340-15-205-2578
Mounting Plate

152052578
504082829: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-008-1845
Retaining Band

150081845
60114807: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-199-3598
Butt Hinge

151993598
40140-3: RNCC: 3 | RNVC: 2

7 Mar 2005

5340-15-149-9311
Loop Clamp

151499311
00028218: RNCC: 3 | RNVC: 2

28 Jun 1999

5340-15-179-9023
Mounting Bracket

151799023
D1404027: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-187-3448
Mortise Lock Set

151873448
070518: RNCC: 3 | RNVC: 2
(241)A3593070518: RNCC: 5 | RNVC: 2

17 Mar 2009

5340-15-105-8401
Retaining Band

151058401
9014: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-119-9719
Angle Bracket

151199719
75085F01: RNCC: 3 | RNVC: 2
75085F01: RNCC: 5 | RNVC: 9

22 May 1996

5340-15-120-4453
Mending Plate

151204453
142503904: RNCC: 3 | RNVC: 2

25 May 1995

5340-15-122-0935
Screw Thread Insert

151220935
529N1010503: RNCC: 3 | RNVC: 2
529N1010503: RNCC: 5 | RNVC: 9

30 Apr 1996

5340-15-053-0663
Screw Thread Insert

150530663
26T038P018: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-125-3598
Handle Grip

151253598
181476580: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-167-5893
Retaining Band

151675893
543024: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-118-4503
Angle Bracket

151184503
60149687: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-118-3422
Loop Clamp

151183422
60144921: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-178-4018
Mounting Bracket

151784018
157618069: RNCC: 3 | RNVC: 2

31 May 2005

5340-15-155-0264
Butt Hinge

151550264
1PA9172500226923000: RNCC: 3 | RNVC: 2
500226923000: RNCC: 3 | RNVC: 2

8 Jan 2002

5340-15-168-9572
Coat And Hat Hook

151689572
F72003054: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-147-0673
Access Cover

151470673
98476471: RNCC: 3 | RNVC: 2

21 Aug 1997

5340-15-195-0067
Drift Bolt

151950067
CH: RNCC: 3 | RNVC: 2
(241)A4155CH: RNCC: 5 | RNVC: 2

16 Feb 2011

5340-15-000-4340
Retaining Band

150004340
4260076368N: RNCC: 3 | RNVC: 2

1 Mar 2013

5340-15-119-6637
Rod End Connector

151196637
M10X65UNI6057AISI316: RNCC: 2 | RNVC: 2

4 Oct 1995

5340-15-119-5682
Angle Bracket

151195682
4857566: RNCC: 3 | RNVC: 2

19 Sep 1994

5340-15-117-7053
Retaining Strap

151177053
1Q 504894: RNCC: 3 | RNVC: 2
1Q 504894: RNCC: 5 | RNVC: 9

10 Jan 1995

5340-15-206-4842
Expansion Shield

152064842
TASS08X40: RNCC: 3 | RNVC: 2
(241)AF699TASS08X40: RNCC: 5 | RNVC: 2

14 Jun 2012

5340-15-152-0017
Angle Bracket

151520017
60123943: RNCC: 3 | RNVC: 2

31 Jul 2000

5340-15-061-5895
Retaining Strap

150615895
1385746: RNCC: 3 | RNVC: 2
1385746: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-156-4067
Loop Clamp

151564067
142068207: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-122-2536
Loop Clamp

151222536
800018922: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-198-9110
Screw Thread Insert

151989110
26HJ04103051S01-020/N: RNCC: 3 | RNVC: 2

25 Nov 2004

5340-15-005-0431
Angle Bracket

150050431
0-33098: RNCC: 3 | RNVC: 2

7 Sep 1977

5340-15-004-8174
Rod End Clevis

150048174
0-33423: RNCC: 3 | RNVC: 2

7 Sep 1977

5340-15-051-3153
Expansion Plug

150513153
1-43284-01: RNCC: 3 | RNVC: 2
14328401: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-192-3404
Mounting Bracket

151923404
STB-270PWV: RNCC: 3 | RNVC: 2
(241)AA201STB-270PWV: RNCC: 5 | RNVC: 2

8 Mar 2010

5340-15-162-1891
Retaining Clip

151621891
SEEGER-J26X1.2: RNCC: 3 | RNVC: 2
SEEGER-J26X1.2: RNCC: 5 | RNVC: 9

3 Apr 2001

5340-15-204-3228
Bow Handle

152043228
0000500429914: RNCC: 3 | RNVC: 2
(241)A39630000500429914: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-120-0892
Retaining Strap

151200892
60164935: RNCC: 3 | RNVC: 2

19 Dec 1994

5340-15-148-3545
Angle Bracket

151483545
105025: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-118-9313
Angle Bracket

151189313
73155856: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-064-0932
Lock-Release Lever

150640932
8666: RNCC: 3 | RNVC: 2

28 Aug 1983

5340-15-001-7285
Retaining Band

150017285
111-02319: RNCC: 3 | RNVC: 2

15 Jul 2013

5340-15-204-1233
Mounting Bracket

152041233
251.25.01.010: RNCC: 3 | RNVC: 2

7 Sep 2011

5340-15-155-9672
Angle Bracket

151559672
500357348: RNCC: 3 | RNVC: 2

17 Oct 2002

5340-15-147-0775
Angle Bracket

151470775
53700: RNCC: 3 | RNVC: 2

21 Aug 1997

5340-15-187-6016
Mounting Bracket

151876016
20.11.30.10: RNCC: 3 | RNVC: 2

14 Apr 2009

5340-15-007-0573
Lock-Release Lever

150070573
1137-04-901: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-020-2212
Leather Strap

150202212
01-231M89: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-109-7266
Screw Thread Insert

151097266
772659: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-157-3041
Block Clamp

151573041
26HJ04143051S01-439: RNCC: 3 | RNVC: 2

19 Jun 2003

5340-15-189-2822
Access Cover

151892822
D8408452: RNCC: 3 | RNVC: 2

10 Feb 2010

5340-15-110-7867
Mending Plate

151107867
60124155: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-108-5689
Butt Hinge Leaf

151085689
93919449: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-005-5101
Retaining Strap

150055101
4392378: RNCC: 3 | RNVC: 2
4392378: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-001-5509
Rod End Clevis

150015509
182742150: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-15-121-6695
Mounting Plate

151216695
800071155: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-205-1058
Mounting Bracket

152051058
504374608: RNCC: 3 | RNVC: 2

21 Feb 2012

5340-15-106-1275
Access Cover

151061275
7951: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-009-1992
Bow Handle

150091992
710244: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-119-1878
Access Cover

151191878
75214919: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-155-9666
Angle Bracket

151559666
500346555: RNCC: 3 | RNVC: 2

17 Oct 2002

5340-15-112-2265
Expansion Plug

151122265
41770754A: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-152-1338
Angle Bracket

151521338
99466268: RNCC: 3 | RNVC: 2

7 Aug 2000

5340-15-203-0395
Angle Bracket

152030395
033090108: RNCC: 3 | RNVC: 2
(241)A5009033090108: RNCC: 5 | RNVC: 2

19 Nov 2007

5340-15-063-7512
Plug Button

150637512
40.06.01.326: RNCC: 3 | RNVC: 2
93.18.02.45: RNCC: 5 | RNVC: 2

30 May 1983

5340-15-156-9245
Mending Plate

151569245
60142928: RNCC: 3 | RNVC: 2

11 Mar 2003

5340-15-187-1303
Mounting Plate

151871303
0000500403753: RNCC: 3 | RNVC: 2
500403753: RNCC: 3 | RNVC: 2

19 Feb 2009

5340-15-108-4289
Expansion Plug

151084289
14281670: RNCC: 3 | RNVC: 2

5 Jan 1989

5340-15-152-7832
Mounting Plate

151527832
P110407: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-150-8490
Bow Handle

151508490
0027.104: RNCC: 3 | RNVC: 2

1 Feb 2000

5340-15-178-4654
Threaded Rod End

151784654
D1222076: RNCC: 3 | RNVC: 2
(241)A0461D1222076: RNCC: 5 | RNVC: 2

1 Jul 2005

5340-15-003-9133
Mounting Plate

150039133
182741342: RNCC: 3 | RNVC: 2
(241)A0199182741342: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-156-8101
Angle Bracket

151568101
11GJ04343219S01-403: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-15-119-7155
Angle Bracket

151197155
60172919: RNCC: 3 | RNVC: 2

8 Nov 1994

5340-15-151-8665
Angle Bracket

151518665
60118211: RNCC: 3 | RNVC: 2

14 Jul 2000

5340-15-065-9673
Retaining Strap

150659673
1376-18-653: RNCC: 3 | RNVC: 2
137618653: RNCC: 5 | RNVC: 2

5 Apr 1994

5340-15-153-3968
Mending Plate

151533968
5137-402-02: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-058-4100
Rod End Connector

150584100
553808107000: RNCC: 2 | RNVC: 3
538-08-1070: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-202-0319
Hand Crank

152020319
74-202713A: RNCC: 3 | RNVC: 2
(241)A331474-202713A: RNCC: 5 | RNVC: 2

24 Jan 2007

5340-15-204-0924
Padlock

152040924
AS-LHT40: RNCC: 3 | RNVC: 2
(241)AF517AS-LHT40: RNCC: 5 | RNVC: 2

5 Sep 2011

5340-15-064-7147
Retaining Strap

150647147
01-245-M003: RNCC: 3 | RNVC: 2

24 Jun 1984

5340-15-118-4434
Angle Bracket

151184434
60154188: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-117-2234
Vent Plug

151172234
0204CP: RNCC: 3 | RNVC: 2
TCF236: RNCC: 3 | RNVC: 2

30 May 1994

5340-15-109-1271
Spring Tension Clip

151091271
14202180: RNCC: 3 | RNVC: 2

30 Apr 1988

5340-15-152-8204
Retaining Band

151528204
P400210: RNCC: 3 | RNVC: 2

27 Oct 2000

5340-15-119-1048
Expansion Plug

151191048
70933322: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-139-7878
Retaining Band

151397878
1000950: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-008-6125
Angle Bracket

150086125
4755349: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-107-8849
Compression Cup

151078849
08-196: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-117-0643
Bridge Clamp

151170643
4871774: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-118-3664
Mending Plate

151183664
60144461: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-117-5378
Plain Solid Disk

151175378
19100A114910: RNCC: 5 | RNVC: 2
19100A114910: RNCC: 5 | RNVC: 9

12 Nov 1993

5340-15-109-8861
Hand Crank Arm

151098861
D0468864: RNCC: 3 | RNVC: 2
468864: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-109-3795
Mending Plate

151093795
5137-290-19: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-009-8861
Plain Solid Disk

150098861
1236-62-102: RNCC: 3 | RNVC: 2

2 Oct 1980

5340-15-062-5118
Mending Plate

150625118
1213-25-137: RNCC: 3 | RNVC: 2
5340-10166: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-117-4208
Mending Plate

151174208
132507151: RNCC: 3 | RNVC: 2

4 Oct 1993

5340-15-103-1104
Bail Handle

151031104
DE013.13.411: RNCC: 3 | RNVC: 2
(241)A5015DE013.13.411: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-063-3244
Retaining Strap

150633244
60110244: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-064-8470
Retaining Strap

150648470
000202987600: RNCC: 5 | RNVC: 2
000202987600: RNCC: 5 | RNVC: 9

16 Nov 1984

5340-15-178-7735
Mounting Plate

151787735
039917: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-134-0095
Handle Grip

151340095
4461986: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-109-5055
Bow Handle

151095055
60144149: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-100-5045
Shimmy Damper

151005045
100900319900: RNCC: 5 | RNVC: 2
100900319900: RNCC: 5 | RNVC: 9

22 Apr 1987

5340-15-152-1161
Angle Bracket

151521161
60156125: RNCC: 3 | RNVC: 2

7 Aug 2000

Load More Results