What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 16 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 16 of 72

5340-15-001-8314
Mounting Bracket

150018314
5949787268: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-205-9056
Block Clamp

152059056
A464A007A: RNCC: 3 | RNVC: 2

13 Apr 2012

5340-15-187-7365
Loop Clamp

151877365
EN4113V24NH: RNCC: 3 | RNVC: 2
(241)I9005EN4113V24NH: RNCC: 5 | RNVC: 2

5 May 2009

5340-15-207-0368
Mounting Plate

152070368
1438644: RNCC: 3 | RNVC: 2

20 Aug 2012

5340-15-195-8084
Access Cover

151958084
167313: RNCC: 3 | RNVC: 2
(241)AJ611167313: RNCC: 5 | RNVC: 2

16 May 2011

5340-15-153-2581
Rim Latch

151532581
122606336: RNCC: 2 | RNVC: 3

12 Dec 2000

5340-15-199-9497
Spring Tension Clip

151999497
377-501-A: RNCC: 3 | RNVC: 2

28 Jul 2005

5340-15-108-3116
Angle Bracket

151083116
60119319: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-163-3678
Mounting Plate

151633678
9261295: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-120-1916
Access Cover

151201916
142507013: RNCC: 3 | RNVC: 2

30 Jan 1995

5340-15-119-5618
Retaining Strap

151195618
4814188: RNCC: 3 | RNVC: 2

19 Sep 1994

5340-15-157-6966
T Bracket

151576966
SOSTEGNO UMM1112: RNCC: 3 | RNVC: 2

16 Oct 2003

5340-15-149-9157
Mounting Bracket

151499157
028502/1: RNCC: 3 | RNVC: 2

25 Jun 1999

5340-15-169-7828
Coat And Hat Hook

151697828
F72018669: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-065-2664
Retaining Strap

150652664
W 007890A: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-156-1524
Angle Bracket

151561524
60190404: RNCC: 3 | RNVC: 2

6 Dec 2002

5340-15-119-0764
Loop Clamp

151190764
70927309: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-118-3843
Loop Clamp

151183843
60159110: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-188-5180
Mounting Bracket

151885180
30044054: RNCC: 3 | RNVC: 2
Z04.03.01.03: RNCC: 5 | RNVC: 2
5340PL0956162: RNCC: 6 | RNVC: 9

29 Sep 2009

5340-15-178-9156
Spring Holder

151789156
AG018MD002AA00: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-15-179-6851
Mounting Bracket

151796851
00194555: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-110-6820
Loop Clamp

151106820
4230010: RNCC: 3 | RNVC: 2

9 Jan 1990

5340-15-207-3466
Loop Clamp

152073466
3630.008: RNCC: 3 | RNVC: 2

9 Oct 2012

5340-15-193-3813
Loop Clamp

151933813
504269855: RNCC: 3 | RNVC: 2
(241)A4249504269855: RNCC: 5 | RNVC: 2

11 May 2010

5340-15-106-7615
Trigger Guard

151067615
4517537: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-074-3983
Retaining Strap

150743983
14UNI2136CD: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-158-6233
Screw Thread Insert

151586233
210002704: RNCC: 3 | RNVC: 2

10 Mar 2004

5340-15-118-4338
Friction Catch

151184338
60152297: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-008-6173
Flush Lock

150086173
4025081: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-100-5684
Loop Clamp

151005684
286287: RNCC: 3 | RNVC: 2
D0286287: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-007-1044
Loop Clamp

150071044
122322-4: RNCC: 3 | RNVC: 2

24 Nov 1979

5340-15-114-0124
Flush Catch

151140124
075204713600: RNCC: 5 | RNVC: 2
075204713600: RNCC: 5 | RNVC: 9

15 Apr 1992

5340-15-180-4859
Retaining Strap

151804859
1P 534694LA: RNCC: 3 | RNVC: 2

3 Jun 2008

5340-15-102-5606
Plain Solid Disk

151025606
61573: RNCC: 3 | RNVC: 2
61573F01: RNCC: 3 | RNVC: 2

4 May 1999

5340-15-100-9235
Rod End Clevis

151009235
808-57641-8: RNCC: 3 | RNVC: 2

1 May 1987

5340-15-156-1737
Loop Clamp

151561737
13001290: RNCC: 3 | RNVC: 2

11 Dec 2002

5340-15-158-5457
Access Cover

151585457
122505220: RNCC: 3 | RNVC: 2

9 Mar 2004

5340-15-118-9146
Mending Plate

151189146
73074170: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-118-6943
Mending Plate

151186943
73134511: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-111-9256
Angle Bracket

151119256
60110582: RNCC: 3 | RNVC: 2

10 Sep 1989

5340-15-064-0664
Handle Grip

150640664
I281-65XM10GH: RNCC: 3 | RNVC: 2
I281-65M/10GH: RNCC: 5 | RNVC: 2

19 Sep 1983

5340-15-107-0687
Bridge Clamp

151070687
B18-03: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-103-4475
Lock-Release Lever

151034475
1376-02-156: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-100-1056
Access Door Hinge

151001056
P-882734-401: RNCC: 3 | RNVC: 2
P882734-401: RNCC: 5 | RNVC: 2

10 Sep 1986

5340-15-151-1956
Mounting Bracket

151511956
20540129A: RNCC: 3 | RNVC: 2

19 Apr 2000

5340-15-163-3793
Bridge Clamp

151633793
9443872: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-009-7569
Handle Grip

150097569
0329: RNCC: 3 | RNVC: 2

22 Jun 1981

5340-15-156-6028
Mounting Bracket

151566028
4934452: RNCC: 3 | RNVC: 2

3 Mar 2003

5340-15-179-9898
Strap Hinge

151799898
9572000: RNCC: 3 | RNVC: 2

16 Nov 2007

5340-15-204-4873
Access Cover

152044873
217609654: RNCC: 3 | RNVC: 2
217609654: RNCC: 5 | RNVC: 2
CV173687: RNCC: 5 | RNVC: 2

7 Nov 2011

5340-15-003-9071
Mounting Plate

150039071
182741037: RNCC: 3 | RNVC: 2
(241)A0199182741037: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-127-6732
Angle Bracket

151276732
976693: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-119-1582
Access Cover

151191582
75208196: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-207-0369
Mounting Plate

152070369
1440566: RNCC: 3 | RNVC: 2

20 Aug 2012

5340-15-163-8686
Handle Grip

151638686
42050526: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-115-6905
Handle Grip

151156905
D0467995: RNCC: 3 | RNVC: 2

8 Mar 1994

5340-15-147-7687
Angle Bracket

151477687
611-0098: RNCC: 3 | RNVC: 2

6 Apr 1998

5340-15-179-6825
Mounting Bracket

151796825
0000098199920: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-186-8623
Mounting Bracket

151868623
1R342642LB: RNCC: 3 | RNVC: 2

5 Jan 2009

5340-15-177-4244
Bridge Clamp

151774244
048723: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-186-9675
Filler Opening Cap

151869675
P171851: RNCC: 3 | RNVC: 2

13 Jan 2009

5340-15-204-3012
Loop Clamp

152043012
EN4113S79NR: RNCC: 3 | RNVC: 2
(241)I9005EN4113S79NR: RNCC: 5 | RNVC: 2

19 Oct 2011

5340-15-149-3159
Loop Clamp

151493159
4886144: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-002-1646
Mounting Bracket

150021646
5801372208: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-200-1960
Mounting Bracket

152001960
ADF3735: RNCC: 3 | RNVC: 2
(241)A5000ADF3735: RNCC: 5 | RNVC: 2

25 Oct 2005

5340-15-179-6067
Access Cover

151796067
SL17135-1: RNCC: 3 | RNVC: 2

11 Apr 2007

5340-15-204-9905
Butt Hinge

152049905
60186592: RNCC: 3 | RNVC: 2
(241)A424960186592: RNCC: 5 | RNVC: 2

8 Feb 2012

5340-15-153-6870
Loop Clamp

151536870
142068012: RNCC: 3 | RNVC: 2

20 Feb 2001

5340-15-109-7227
Loop Clamp

151097227
60138747: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-116-4966
Catch Strike

151164966
60167586: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-133-6818
Angle Bracket

151336818
4668090: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-116-4814
Angle Bracket

151164814
60150595: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-005-3707
Loop Clamp

150053707
1-34175-08: RNCC: 3 | RNVC: 2
1-34175-08: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-073-5276
Mortise Lock Set

150735276
P287: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-118-7294
Mounting Bracket

151187294
73127641: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-155-8500
Angle Bracket

151558500
8870 003-951-BAG: RNCC: 3 | RNVC: 2

7 Aug 2002

5340-15-121-9192
Angle Bracket

151219192
93801621: RNCC: 3 | RNVC: 2

29 Mar 1996

5340-15-008-0706
Angle Bracket

150080706
1394514: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-187-1961
Retaining Band

151871961
MFP25.100: RNCC: 3 | RNVC: 2
(241)A3980MFP25.100: RNCC: 5 | RNVC: 2

24 Feb 2009

5340-15-045-3304
Rod End Clevis

150453304
551-12-01: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-187-8206
Mounting Bracket

151878206
018.066.00.41: RNCC: 3 | RNVC: 2
018.066.00.41: RNCC: 5 | RNVC: 2
(241)A6479018.066.00.41: RNCC: 5 | RNVC: 2

7 May 2009

5340-15-170-6475
Mounting Bracket

151706475
146-0192/05: RNCC: 3 | RNVC: 2
(241)A0069146-0192/05: RNCC: 5 | RNVC: 2

28 Apr 2003

5340-15-148-4658
Caster Wheel

151484658
PD 125-1: RNCC: 3 | RNVC: 2

13 Aug 1998

5340-15-187-6208
Retaining Clip

151876208
VF/PC: RNCC: 3 | RNVC: 2
(241)AH405VF/PC: RNCC: 5 | RNVC: 2

15 Apr 2009

5340-15-206-2986
Rod End Clevis

152062986
GP3840: RNCC: 3 | RNVC: 2

1 Jun 2012

5340-15-005-4130
Retaining Clip

150054130
1137-10-160: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-198-4116
Access Cover

151984116
122505608: RNCC: 3 | RNVC: 2

27 Sep 2004

5340-15-112-3483
Retaining Strap

151123483
4837072: RNCC: 3 | RNVC: 2
126133: RNCC: 5 | RNVC: 2
(7001)5340151123483: RNCC: 5 | RNVC: 2

7 Oct 1989

5340-15-113-2888
Retaining Strap

151132888
1Z 591155: RNCC: 3 | RNVC: 2
1Z 591155: RNCC: 5 | RNVC: 9

3 Dec 1993

5340-15-110-7874
Mending Plate

151107874
60109546: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-053-0672
Screw Thread Insert

150530672
26T038P027: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-109-7500
Retaining Band

151097500
4777690: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-162-0289
Handle Grip

151620289
93911609: RNCC: 3 | RNVC: 2

15 Nov 2000

5340-15-103-8556
Angle Bracket

151038556
8583168: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-187-4187
Leather Strap

151874187
1811: RNCC: 3 | RNVC: 2

30 Mar 2009

5340-15-119-1325
Mending Plate

151191325
73124471: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-005-5337
Angle Bracket

150055337
1026-01-274: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-155-8214
Mending Plate

151558214
BN176/1: RNCC: 3 | RNVC: 2
42536895: RNCC: 3 | RNVC: 2

10 Jul 2002

5340-15-207-8654
Mounting Bracket

152078654
5801339745: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-122-3294
Butt Hinge Leaf

151223294
212A7105-001: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-147-3549
Access Cover

151473549
109-0322-34-105: RNCC: 3 | RNVC: 2

31 Oct 1997

5340-15-005-4901
Detent Plunger

150054901
1137-17-105: RNCC: 3 | RNVC: 2
113717105: RNCC: 3 | RNVC: 2

10 Jan 1979

5340-15-150-6416
Rod End Clevis

151506416
NOR5-225-12-7A: RNCC: 3 | RNVC: 2

20 Dec 1999

5340-15-153-7761
Access Cover

151537761
02731H107720: RNCC: 5 | RNVC: 2
T0063681: RNCC: 5 | RNVC: 2
02731H107720: RNCC: 5 | RNVC: 9

28 Feb 2001

5340-15-149-6649
Retaining Clip

151496649
64NB20048: RNCC: 3 | RNVC: 2

15 Apr 1999

5340-15-150-3038
Flush Lock

151503038
B-171/1-VM90P: RNCC: 3 | RNVC: 2
93194854: RNCC: 5 | RNVC: 2

23 Sep 1999

5340-15-008-0828
Mending Plate

150080828
60114975: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-004-2523
Angle Bracket

150042523
FL0692-101: RNCC: 3 | RNVC: 2

14 Nov 1977

5340-15-150-5408
Bow Handle

151505408
341-8164/02: RNCC: 3 | RNVC: 2

30 Nov 1999

5340-15-116-4808
Angle Bracket

151164808
60166328: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-150-9798
Hook Handle

151509798
369-09098-101: RNCC: 3 | RNVC: 2

17 Feb 2000

5340-15-067-9296
Rod End Clevis

150679296
24122-001: RNCC: 3 | RNVC: 2

3 Mar 1986

5340-15-160-8582
Coat And Hat Hook

151608582
F720023372: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-100-4235
Retaining Strap

151004235
6154842: RNCC: 3 | RNVC: 2

10 Feb 1987

5340-15-057-6571
Handle Grip

150576571
204-8120-10-1: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-005-1738
Strap Hinge

150051738
1378268: RNCC: 3 | RNVC: 2
1378268: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-101-4240
Rod End Clevis

151014240
1576-08-214: RNCC: 3 | RNVC: 2
157608214: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-177-3753
Mounting Plate

151773753
027002: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-103-8713
Loop Clamp

151038713
10449690: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-157-5948
Loop Clamp

151575948
07021112: RNCC: 3 | RNVC: 2

29 Sep 2003

5340-15-195-2146
Mounting Bracket

151952146
218019874: RNCC: 3 | RNVC: 2
218019874: RNCC: 5 | RNVC: 2
CV173688: RNCC: 5 | RNVC: 2

7 Mar 2011

5340-15-001-7890
Protection Bellows

150017890
5949790160: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-187-4267
Mounting Bracket

151874267
504032796: RNCC: 3 | RNVC: 2

30 Mar 2009

5340-15-063-3213
Leather Strap

150633213
60104983: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-187-6275
Lock Spindle

151876275
504060737: RNCC: 3 | RNVC: 2

15 Apr 2009

5340-15-073-8906
Flush Lock

150738906
13A65X50-3LEVE: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-073-8908
Flush Lock

150738908
13A65X60-3LEVE: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-163-4019
Mounting Plate

151634019
9844681: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-058-6726
Mortise Lock Set

150586726
3514: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-002-3147
Retaining Strap

150023147
504277377: RNCC: 3 | RNVC: 2

6 Aug 2013

5340-15-187-3819
Loop Clamp

151873819
1K0253141B: RNCC: 3 | RNVC: 2
(241)AG2531K0253141B: RNCC: 5 | RNVC: 2

23 Mar 2009

5340-15-193-9859
Loop Clamp

151939859
17766901: RNCC: 3 | RNVC: 2
B002053: RNCC: 5 | RNVC: 2
B002053: RNCC: 5 | RNVC: 2

11 Aug 2010

5340-15-205-4190
Retaining Strap

152054190
178904752: RNCC: 3 | RNVC: 2
(241)A0199178904752: RNCC: 5 | RNVC: 2

8 Mar 2012

5340-15-109-3893
Mending Plate

151093893
5137-014-19: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-160-3770
Coat And Hat Hook

151603770
F720085541: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-118-9118
Rod End Clevis

151189118
70638732: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-000-2935
Retaining Band

150002935
CY5018: RNCC: 3 | RNVC: 2

15 Feb 2013

5340-15-148-3552
Angle Bracket

151483552
109785: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-007-1868
Rod End Connector

150071868
1390730: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-061-2432
Hand Crank

150612432
000200063200: RNCC: 5 | RNVC: 2
1200096-134000001: RNCC: 5 | RNVC: 2
000200063200: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-118-3337
Retaining Strap

151183337
60141660: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-179-8987
Access Cover

151798987
D1405046: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-152-7953
Support Hook

151527953
P200109: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-179-6863
Angle Bracket

151796863
0000500408348: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-144-9168
Access Cover

151449168
60179777: RNCC: 3 | RNVC: 2

10 Feb 1997

5340-15-145-1480
Screw Thread Insert

151451480
01320060012: RNCC: 3 | RNVC: 2

19 May 1997

5340-15-205-0567
Retaining Strap

152050567
9170010: RNCC: 3 | RNVC: 2
(241)A50099170010: RNCC: 5 | RNVC: 2

16 Feb 2012

5340-15-196-2010
Rim Lock

151962010
PN UAS 00004541: RNCC: 3 | RNVC: 2
9999Z90001132: RNCC: 5 | RNVC: 9

31 Mar 2004

5340-15-108-5225
Angle Bracket

151085225
60110354: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-003-9154
Plain Solid Disk

150039154
182702016: RNCC: 3 | RNVC: 2
(241)A0199182702016: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-158-5890
Clamping Catch

151585890
122505267: RNCC: 3 | RNVC: 2

9 Mar 2004

5340-15-117-6386
Angle Bracket

151176386
142502398: RNCC: 3 | RNVC: 2

4 Jan 1994

5340-15-119-1877
Access Cover

151191877
75214918: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-113-1446
Mending Plate

151131446
277A0255-001: RNCC: 3 | RNVC: 2

7 Oct 1990

5340-15-119-4027
Angle Bracket

151194027
60173529: RNCC: 3 | RNVC: 2

25 Jul 1994

5340-15-119-1305
Access Cover

151191305
73123506: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-008-5565
Mending Plate

150085565
012353 S: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-007-1918
Loop Clamp

150071918
1384616: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-118-7325
Mounting Bracket

151187325
73127955: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-179-9466
Blank Panel

151799466
8143878: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-001-8264
Bridge Clamp

150018264
500404442: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-062-7913
Retaining Strap

150627913
0-34163: RNCC: 3 | RNVC: 2

28 Aug 1982

5340-15-148-3558
Angle Bracket

151483558
158139: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-197-6940
Screw Thread Insert

151976940
620010: RNCC: 3 | RNVC: 2

20 Apr 2004

5340-15-119-0880
Expansion Plug

151190880
70929974: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-163-4063
Mounting Plate

151634063
9924535: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-113-0081
Handle Grip

151130081
48204200000: RNCC: 3 | RNVC: 2
93155219: RNCC: 5 | RNVC: 2

23 Feb 1989

5340-15-063-8107
Expansion Plug

150638107
1/43291/01: RNCC: 3 | RNVC: 2

31 Mar 1982

5340-15-000-7271
Thumb Latch

150007271
BRP-0335207: RNCC: 3 | RNVC: 2

3 Apr 2013

5340-15-118-3375
Angle Bracket

151183375
60141675: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-162-2097
Mending Plate

151622097
015.010DX: RNCC: 3 | RNVC: 2

17 May 2001

5340-15-122-0962
Access Cover

151220962
634631: RNCC: 3 | RNVC: 2
634631: RNCC: 5 | RNVC: 9

30 Apr 1996

5340-15-121-2972
Screw Thread Insert

151212972
3861360: RNCC: 3 | RNVC: 2

7 Nov 1995

5340-15-149-8095
Access Cover

151498095
128647: RNCC: 3 | RNVC: 2
0052634: RNCC: 5 | RNVC: 2

2 Jun 1999

5340-15-104-4362
Expansion Plug

151044362
10160701: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-198-7906
Catch Strike

151987906
60188159: RNCC: 3 | RNVC: 2

17 Nov 2004

5340-15-119-4026
Angle Bracket

151194026
60173800: RNCC: 3 | RNVC: 2

25 Jul 1994

5340-15-063-5986
Retaining Strap

150635986
5941115: RNCC: 3 | RNVC: 2
5941115: RNCC: 5 | RNVC: 9

13 Nov 1982

5340-15-112-8091
Vent Plug

151128091
487305: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-178-9407
Retaining Band

151789407
142050000050: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-15-149-3003
Access Cover

151493003
4885235: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-152-2513
Mounting Plate

151522513
D22 D835 00T: RNCC: 3 | RNVC: 2
D22 D835 00T: RNCC: 5 | RNVC: 2

17 Aug 2000

5340-15-108-6341
Catch Strike

151086341
60139709: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-100-6833
Rod End Connector

151006833
W000784: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-201-4720
Retaining Strap

152014720
A487A001A: RNCC: 3 | RNVC: 2
(241)A0126A487A001A: RNCC: 5 | RNVC: 2

26 Sep 2006

5340-15-009-0697
Rod End Clevis

150090697
8282586: RNCC: 3 | RNVC: 2

27 Aug 1979

5340-15-063-7377
Plug Button

150637377
40.70.01.308: RNCC: 3 | RNVC: 2
93.18.01.05: RNCC: 5 | RNVC: 2

30 May 1983

5340-15-178-6459
Mounting Plate

151786459
2C.244530: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-057-0297
Angle Bracket

150570297
D0R061628: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-002-5265
Control Rod

150025265
42561774: RNCC: 3 | RNVC: 2

2 Sep 2013

5340-15-111-7993
Angle Bracket

151117993
MF010225: RNCC: 3 | RNVC: 2

1 Jul 1990

5340-15-074-3992
Retaining Strap

150743992
6UNI2137: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-127-6592
Angle Bracket

151276592
843580: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-194-7388
Dashpot

151947388
VV0008: RNCC: 3 | RNVC: 2
(241)AJ348VV0008: RNCC: 5 | RNVC: 2

12 Jan 2011

5340-15-204-3744
Expansion Plug

152043744
49468040: RNCC: 3 | RNVC: 2

26 Oct 2011

5340-15-160-4765
Coat And Hat Hook

151604765
F720100581: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-120-4525
Access Cover

151204525
142505114: RNCC: 3 | RNVC: 2

25 May 1995

5340-15-145-0132
Mending Plate

151450132
112744305: RNCC: 3 | RNVC: 2

12 May 1997

5340-15-073-5629
Flush Lock

150735629
19890-040: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-103-8663
Screw Thread Insert

151038663
4279430: RNCC: 3 | RNVC: 2
(7001)5340151038663: RNCC: 5 | RNVC: 2
A060017-015: RNCC: 5 | RNVC: 2

30 Mar 1988

5340-15-000-4334
Retaining Band

150004334
4260036300N: RNCC: 3 | RNVC: 2

1 Mar 2013

5340-15-051-6975
Handle Grip

150516975
01-237E150: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-180-0767
Angle Bracket

151800767
1Q 612366: RNCC: 3 | RNVC: 2

28 Jan 2008

5340-15-202-3380
Loop Clamp

152023380
504017427: RNCC: 3 | RNVC: 2
(241)A4249504017427: RNCC: 5 | RNVC: 2

28 Feb 2007

5340-15-119-1168
Angle Bracket

151191168
73112126: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-000-3546
Retaining Band

150003546
504064329: RNCC: 3 | RNVC: 2

25 Feb 2013

5340-15-089-3605
Spring Tension Clip

150893605
FL0121-101: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-008-9920
Retaining Strap

150089920
206-052-105-1029: RNCC: 3 | RNVC: 2

21 Apr 1982

5340-15-113-5695
Bow Handle

151135695
93514-001: RNCC: 3 | RNVC: 2

14 Jan 1992

5340-15-117-1959
Mending Plate

151171959
190511127: RNCC: 3 | RNVC: 2

2 Sep 1993

5340-15-109-1810
Retaining Strap

151091810
1397190: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-063-8263
Mounting Plate

150638263
195014-003: RNCC: 3 | RNVC: 2

27 Oct 1983

5340-15-187-5662
Mounting Bracket

151875662
TAK-0061/01: RNCC: 3 | RNVC: 2

9 Apr 2009

5340-15-199-4611
Angle Bracket

151994611
72794F92: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-15-109-8768
Retaining Strap

151098768
60131745: RNCC: 3 | RNVC: 2

15 Oct 1988

5340-15-002-7879
Mounting Plate

150027879
1099: RNCC: 3 | RNVC: 2

2 Oct 2013

5340-15-116-4754
Butt Hinge Leaf

151164754
60151181: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-116-0823
Support Hook

151160823
1Q 236568LA: RNCC: 3 | RNVC: 2
1Q 236568LA: RNCC: 5 | RNVC: 9

10 Jun 1994

5340-15-008-5935
Expansion Plug

150085935
1/01584/01: RNCC: 3 | RNVC: 2

26 Nov 1996

5340-15-063-5097
Retaining Strap

150635097
60113664: RNCC: 3 | RNVC: 2
0-117317: RNCC: 5 | RNVC: 2
(241)A39630-117317: RNCC: 5 | RNVC: 2

15 Oct 1982

5340-15-151-5355
Retaining Strap

151515355
0-112034: RNCC: 3 | RNVC: 2
00112034: RNCC: 3 | RNVC: 2
(241)A39630-112034: RNCC: 5 | RNVC: 2
1PA39630-112034: RNCC: 5 | RNVC: 2

6 Jun 2000

5340-15-145-1937
Screw Thread Insert

151451937
PM-010-P: RNCC: 3 | RNVC: 2

2 Jun 1997

5340-15-105-8973
Spring Tension Clip

151058973
C244339C: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-113-2887
Retaining Strap

151132887
1Z 591154: RNCC: 3 | RNVC: 2
1Z 591154: RNCC: 5 | RNVC: 9

3 Dec 1993

5340-15-001-5516
Access Cover

150015516
182719588: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-15-009-1176
Bow Handle

150091176
127286: RNCC: 3 | RNVC: 2

10 Apr 1980

5340-15-060-1448
Screw Thread Insert

150601448
1376-31-363: RNCC: 3 | RNVC: 2
137631363: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-062-2010
Bow Handle

150622010
P-892876-001: RNCC: 3 | RNVC: 2
P892876-001: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-108-6338
Catch Strike

151086338
8857291: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-112-4028
Access Cover

151124028
R105218: RNCC: 3 | RNVC: 2

2 Nov 1995

5340-15-200-4504
Mounting Bracket

152004504
920-7548/04: RNCC: 3 | RNVC: 2
(241)A4582920-7548/04: RNCC: 5 | RNVC: 2

23 Jan 2006

5340-15-145-1814
Mounting Bracket

151451814
9CB9142A014-401: RNCC: 3 | RNVC: 2

2 Jun 1997

5340-15-179-8207
Mounting Bracket

151798207
109-0856-86-103: RNCC: 3 | RNVC: 2

3 Aug 2007

5340-15-202-8112
Hook Handle

152028112
SE1S62422512: RNCC: 3 | RNVC: 2
(241)A4519SE1S62422512: RNCC: 5 | RNVC: 2

16 Jul 2007

5340-15-005-1037
Mending Plate

150051037
4127-96-014-31: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-153-2572
Rod End Clevis

151532572
122606300: RNCC: 2 | RNVC: 3

12 Dec 2000

5340-15-109-1835
Angle Bracket

151091835
1395072: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-116-8583
Lever Bracket

151168583
D0470125: RNCC: 3 | RNVC: 2

8 Apr 1994

5340-15-108-6732
Plain Solid Disk

151086732
1455-35-107: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-155-0998
Handle Grip

151550998
142006141: RNCC: 3 | RNVC: 2

18 Jan 2002

5340-15-179-6732
Mounting Plate

151796732
0000000195259: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-114-2464
Retaining Strap

151142464
15303: RNCC: 3 | RNVC: 2

30 Nov 1993

5340-15-113-2889
Angle Bracket

151132889
1Z 591162: RNCC: 3 | RNVC: 2
1Z 591162: RNCC: 5 | RNVC: 9

3 Dec 1993

5340-15-117-7060
Retaining Strap

151177060
D9105009P: RNCC: 3 | RNVC: 2
D9105009P: RNCC: 5 | RNVC: 9

10 Jan 1995

5340-15-007-0652
Screw Thread Insert

150070652
1137-19-144: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-113-1461
Rod End Clevis

151131461
312A5531-001: RNCC: 3 | RNVC: 2

7 Oct 1990

5340-15-203-0582
Retaining Band

152030582
033090013: RNCC: 3 | RNVC: 2
(241)A5009033090013: RNCC: 5 | RNVC: 2

19 Nov 2007

5340-15-004-2484
Access Hole Frame

150042484
163HAE2S10: RNCC: 5 | RNVC: 2
163HAE2S10: RNCC: 5 | RNVC: 9

12 Oct 1977

5340-15-118-3339
Retaining Strap

151183339
60143591: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-109-0186
Angle Bracket

151090186
60105586: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-108-6267
Retaining Strap

151086267
8585197: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-195-3756
Caster Wheel

151953756
60.65.427.00: RNCC: 3 | RNVC: 2
(241)AJ86060.65.427.00: RNCC: 5 | RNVC: 2

21 Mar 2011

5340-15-111-9307
Retaining Strap

151119307
1389874: RNCC: 3 | RNVC: 2

10 Sep 1989

5340-15-155-3937
Angle Bracket

151553937
8854 138-122: RNCC: 3 | RNVC: 2

12 Mar 2002

5340-15-102-1043
Door Handle

151021043
193-0484/26: RNCC: 3 | RNVC: 2

22 Jun 1986

5340-15-061-4994
Retaining Strap

150614994
000200105000: RNCC: 5 | RNVC: 2
1200096-130000004: RNCC: 5 | RNVC: 2
000200105000: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-118-3668
Mending Plate

151183668
60146223: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-001-5542
Access Cover

150015542
182719044: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-15-064-8589
Angle Bracket

150648589
26065.0000: RNCC: 5 | RNVC: 2
4-26065D: RNCC: 5 | RNVC: 2
26065.0000: RNCC: 5 | RNVC: 9
4-26065D: RNCC: 5 | RNVC: 9

27 Oct 1981

5340-15-064-7661
Mending Plate

150647661
19.57.75.90: RNCC: 3 | RNVC: 2

26 Dec 1983

5340-15-059-6808
Rod End Clevis

150596808
04863-101A1: RNCC: 3 | RNVC: 2
04863-101A1: RNCC: 5 | RNVC: 2

12 May 1976

5340-15-162-6639
Hand Crank Arm

151626639
541.61044: RNCC: 3 | RNVC: 2
541.61044.0: RNCC: 3 | RNVC: 2

7 Dec 2001

5340-15-175-1288
Angle Bracket

151751288
S61-0920-13-132: RNCC: 3 | RNVC: 2

16 Jan 2004

5340-15-168-9631
Coat And Hat Hook

151689631
F72003365: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-152-2503
Screw Thread Insert

151522503
5MMFR03DX: RNCC: 3 | RNVC: 2

17 Aug 2000

5340-15-179-7171
Mounting Plate

151797171
0000500410017: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-119-1213
Angle Bracket

151191213
73115878: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-109-6714
Angle Bracket

151096714
71-811-801: RNCC: 3 | RNVC: 2
71-811-801: RNCC: 5 | RNVC: 9

16 Apr 1978

5340-15-179-2714
Angle Bracket

151792714
D1-85116-401: RNCC: 3 | RNVC: 2

10 Aug 2006

5340-15-116-4760
Butt Hinge Leaf

151164760
60165626: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-120-2954
Angle Bracket

151202954
60168233: RNCC: 3 | RNVC: 2
(241)AF90860168233: RNCC: 5 | RNVC: 2
60168233: RNCC: 5 | RNVC: 2

13 Mar 1995

5340-15-119-7162
Angle Bracket

151197162
60173089: RNCC: 3 | RNVC: 2

8 Nov 1994

5340-15-007-2631
Retaining Strap

150072631
1389154: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-204-8789
Retaining Bail

152048789
101019: RNCC: 3 | RNVC: 2
101019: RNCC: 3 | RNVC: 2
(241)AD751101019: RNCC: 5 | RNVC: 2

19 Jan 2012

5340-15-119-1871
Retaining Strap

151191871
75214901: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-186-9009
Access Cover

151869009
641606: RNCC: 3 | RNVC: 2
0028822: RNCC: 5 | RNVC: 2

5 Jan 2009

5340-15-102-5644
Angle Bracket

151025644
72794: RNCC: 3 | RNVC: 2

1 Mar 1993

5340-15-157-4226
Access Cover

151574226
21505667: RNCC: 3 | RNVC: 2

14 Jul 2003

5340-15-119-1967
Angle Bracket

151191967
75222104: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-002-1580
Mounting Plate

150021580
99R01249098O: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-194-8687
Synchro Clamp

151948687
D0076.0001: RNCC: 3 | RNVC: 2
(241)A0069D0076.0001: RNCC: 5 | RNVC: 2

27 Jan 2011

5340-15-071-7640
Handle Grip

150717640
160D: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-064-3799
Screw Thread Insert

150643799
F492D1-54: RNCC: 3 | RNVC: 2
F492D1-54: RNCC: 5 | RNVC: 2

1 Mar 1984

5340-15-110-2205
Rod End Clevis

151102205
68341-101B01: RNCC: 3 | RNVC: 2
68341-101B1: RNCC: 5 | RNVC: 2

9 Jul 1990

5340-15-063-3198
Angle Bracket

150633198
60104898: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-063-4814
Angle Bracket

150634814
42009232: RNCC: 3 | RNVC: 2

15 Jun 1982

5340-15-113-8009
Hand Crank

151138009
1111-06-011: RNCC: 3 | RNVC: 2

27 Feb 1992

5340-15-178-0182
Lever Bracket

151780182
GB 254-000-000: RNCC: 3 | RNVC: 2

25 Aug 2004

5340-15-111-7988
Angle Bracket

151117988
9917: RNCC: 3 | RNVC: 2

1 Jul 1990

5340-15-186-7940
Handwheel

151867940
6113040: RNCC: 3 | RNVC: 2

5 Jan 2009

5340-15-009-6739
Angle Bracket

150096739
167608P1: RNCC: 3 | RNVC: 2

17 Oct 1980

5340-15-007-1881
Retaining Strap

150071881
1374493: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-170-3151
Mounting Bracket

151703151
1290637: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-121-8869
Angle Bracket

151218869
206-9320-05-3: RNCC: 3 | RNVC: 2

19 Mar 1996

5340-15-150-2487
Mending Plate

151502487
A0702900: RNCC: 3 | RNVC: 2

31 Aug 1999

5340-15-108-8387
Angle Bracket

151088387
09207A: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-194-6043
Handle Grip

151946043
156021700: RNCC: 3 | RNVC: 2
156021700: RNCC: 3 | RNVC: 2
(241)AA821156021700: RNCC: 5 | RNVC: 2

14 Dec 2010

5340-15-158-5932
Screw Thread Insert

151585932
215602507: RNCC: 3 | RNVC: 2

9 Mar 2004

5340-15-107-5074
Retaining Band

151075074
7302942: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-149-2986
Angle Bracket

151492986
4882772: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-207-5965
Retaining Strap

152075965
178904541: RNCC: 3 | RNVC: 2
(241)A0199178904541: RNCC: 5 | RNVC: 2

5 Nov 2012

5340-15-116-4912
Retaining Strap

151164912
60149245: RNCC: 3 | RNVC: 2
(241)AF90860149245: RNCC: 5 | RNVC: 2
60149245: RNCC: 5 | RNVC: 2

20 May 1993

5340-15-005-3629
Angle Bracket

150053629
1382259: RNCC: 3 | RNVC: 2
1382259: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-106-7547
Angle Bracket

151067547
1363364: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-118-4502
Angle Bracket

151184502
60150340: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-116-3332
Retaining Strap

151163332
759915: RNCC: 3 | RNVC: 2

22 Apr 1993

5340-15-045-2557
Handle Grip

150452557
510-12-17: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-178-5490
Mounting Plate

151785490
2231.051.0003: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-000-4015
Lock Key

150004015
29.09682.14: RNCC: 3 | RNVC: 2

27 Feb 2013

5340-15-007-1921
Loop Clamp

150071921
1374858: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-181-1761
Loop Clamp

151811761
179040100: RNCC: 3 | RNVC: 2
(241)A0199179040100: RNCC: 5 | RNVC: 2

5 Nov 2008

5340-15-003-9124
Mounting Plate

150039124
182741328: RNCC: 3 | RNVC: 2
(241)A0199182741328: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-194-8412
Rim Lock Set

151948412
1 54340 60 0 95: RNCC: 3 | RNVC: 2

25 Jan 2011

5340-15-152-9426
Access Cover

151529426
1M06870001: RNCC: 3 | RNVC: 2
48050000018/3: RNCC: 5 | RNVC: 2

9 Nov 2000

5340-15-073-5211
Rim Lock Set

150735211
18390-107: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-149-5934
Bow Handle

151495934
341-4589/01: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-074-3303
Retaining Strap

150743303
A12UNAV1046A37UN1743: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-129-6448
Angle Bracket

151296448
4004896: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-152-9549
Loop Clamp

151529549
48050000090/6: RNCC: 3 | RNVC: 2

9 Nov 2000

5340-15-121-6639
Mounting Bracket

151216639
800057003: RNCC: 3 | RNVC: 2
(241)A3258800057003: RNCC: 5 | RNVC: 2

6 Feb 1996

5340-15-071-4557
Rim Lock

150714557
1971TAV022MSENSP: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-201-0618
Loop Clamp

152010618
EN4114F28WR1: RNCC: 2 | RNVC: 2
(241)I9005EN4114F28WR1: RNCC: 5 | RNVC: 2

16 May 2006

5340-15-163-3832
Bridge Clamp

151633832
9454974: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-020-1984
Handle Grip

150201984
01-231N88: RNCC: 3 | RNVC: 2
55.33.081.A: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-001-2847
Mounting Bracket

150012847
D8411826: RNCC: 3 | RNVC: 2

14 Jun 2013

5340-15-206-3522
Mounting Bracket

152063522
500402008: RNCC: 3 | RNVC: 2

4 Jun 2012

5340-15-001-1110
Mounting Bracket

150011110
5801360093: RNCC: 3 | RNVC: 2

31 May 2013

5340-15-156-0792
Mounting Plate

151560792
807069: RNCC: 3 | RNVC: 2
(241)S7177807069: RNCC: 5 | RNVC: 2

20 Nov 2002

5340-15-002-2215
Caster Frame

150022215
11.226.22.04.00: RNCC: 3 | RNVC: 2

30 Jul 2013

5340-15-108-9566
Mending Plate

151089566
50572250: RNCC: 3 | RNVC: 2

25 May 1989

5340-15-108-6340
Catch Strike

151086340
60139707: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-196-8960
Retaining Band

151968960
PN UAS 00044853: RNCC: 3 | RNVC: 2
3470F76036838: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-118-4817
Mending Plate

151184817
02.0648.A.04: RNCC: 3 | RNVC: 2
02.0648.A.04: RNCC: 5 | RNVC: 9

7 Feb 1995

5340-15-113-9300
Vent Plug

151139300
TCF.1: RNCC: 3 | RNVC: 2

10 May 1993

5340-15-119-0199
Loop Clamp

151190199
70669359: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-198-4139
Stand Base

151984139
122605410: RNCC: 3 | RNVC: 2

27 Sep 2004

5340-15-109-0512
Handle Grip

151090512
PL40-M12: RNCC: 3 | RNVC: 2
60152302: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-108-2933
Angle Bracket

151082933
60134950: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-007-1819
Angle Bracket

150071819
1393758: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-118-3649
Mending Plate

151183649
60140997: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-001-8122
Metal Grille

150018122
5949790321: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-102-7098
Retaining Strap

151027098
41792: RNCC: 3 | RNVC: 2

10 Aug 1987

5340-15-151-9415
Angle Bracket

151519415
0-174061: RNCC: 3 | RNVC: 2
00174061: RNCC: 3 | RNVC: 2
(241)A39630-174061: RNCC: 5 | RNVC: 2
1PA39630-174061: RNCC: 5 | RNVC: 2

26 Jul 2000

5340-15-045-2932
Loop Clamp

150452932
N0R2-505-06-22B: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-004-1526
Expansion Plug

150041526
1/01586/01: RNCC: 3 | RNVC: 2
1/01586/01: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-121-0858
Vent Plug

151210858
SF0100-POLIP: RNCC: 3 | RNVC: 2

22 Dec 1995

5340-15-005-4570
Handle Grip

150054570
1137-16-020: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-201-2567
Angle Bracket

152012567
1188.154-01: RNCC: 3 | RNVC: 2
(241)A30931188.154-01: RNCC: 5 | RNVC: 2

11 Jul 2006

5340-15-155-0521
Angle Bracket

151550521
J28040645-003: RNCC: 3 | RNVC: 2

9 Jan 2002

5340-15-116-4812
Angle Bracket

151164812
60149381: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-103-0336
Angle Bracket

151030336
79029743: RNCC: 3 | RNVC: 2

21 Jun 1987

5340-15-117-7057
Retaining Strap

151177057
D9103047P: RNCC: 3 | RNVC: 2
D9103047P: RNCC: 5 | RNVC: 9

10 Jan 1995

5340-15-180-1443
Metal Grille

151801443
120020246: RNCC: 3 | RNVC: 2

15 Feb 2008

5340-15-120-2715
Expansion Plug

151202715
60144169: RNCC: 3 | RNVC: 2

9 Mar 1995

5340-15-119-9099
Angle Bracket

151199099
180504111: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-150-5876
Bow Handle

151505876
A81021-42-22: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-15-108-6730
Angle Bracket

151086730
1455-32-114: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-109-7493
Retaining Strap

151097493
4763440: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-114-9804
Rod End Clevis

151149804
62039: RNCC: 3 | RNVC: 2
62039: RNCC: 5 | RNVC: 9

13 Oct 1992

5340-15-163-7727
Handle Grip

151637727
GB062300000: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-100-8298
Expansion Plug

151008298
21770051A: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-116-4757
Butt Hinge Leaf

151164757
60165036: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-180-3640
Mounting Plate

151803640
2585062: RNCC: 3 | RNVC: 2
2585062: RNCC: 5 | RNVC: 2

29 Apr 2008

5340-15-115-5346
Handle Grip

151155346
D0471992: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-102-2198
Angle Bracket

151022198
109-0761-76-1: RNCC: 3 | RNVC: 2

16 Dec 1986

5340-15-199-7346
Protection Bellows

151997346
920-4740/01: RNCC: 3 | RNVC: 2
(241)A4582920-4740/01: RNCC: 5 | RNVC: 2

22 May 2005

5340-15-205-7462
Access Cover

152057462
109-0010-87-137: RNCC: 3 | RNVC: 2

29 Mar 2012

5340-15-119-0481
Expansion Plug

151190481
70917701: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-121-6408
Mounting Plate

151216408
800040871: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-007-0174
Screw Thread Insert

150070174
042201447800: RNCC: 5 | RNVC: 2
042201447800: RNCC: 5 | RNVC: 9

8 Jan 1982

5340-15-009-5769
Retaining Band

150095769
995242: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-131-6217
Angle Bracket

151316217
4534716: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-189-0413
Mounting Bracket

151890413
EUROMET 08907: RNCC: 3 | RNVC: 2
(241)A8712EUROMET08907: RNCC: 5 | RNVC: 2

19 Jan 2010

5340-15-065-0931
Retaining Strap

150650931
19.57.55.90: RNCC: 3 | RNVC: 2

26 Dec 1983

5340-15-111-5982
Corner Brace

151115982
A05482-01-20: RNCC: 3 | RNVC: 2
A05482-01-20: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-089-5820
Butt Hinge

150895820
16940-100: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-051-3403
Angle Bracket

150513403
AL100-02C1: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-149-9615
Retaining Strap

151499615
00007417: RNCC: 3 | RNVC: 2

5 Jul 1999

5340-15-007-1923
Loop Clamp

150071923
1379521: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-114-3555
Corner Brace

151143555
5216-207-10: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-15-105-8383
Retaining Band

151058383
23264: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-108-7605
Angle Bracket

151087605
60142111: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-108-8441
Mending Plate

151088441
01906: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-122-0007
Angle Bracket

151220007
60176650: RNCC: 3 | RNVC: 2

10 Apr 1996

5340-15-131-3411
Angle Bracket

151313411
888473: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-117-1991
Corner Brace

151171991
190515206: RNCC: 3 | RNVC: 2

2 Sep 1993

5340-15-119-5651
Angle Bracket

151195651
4881415: RNCC: 3 | RNVC: 2

19 Sep 1994

5340-15-073-5622
Flush Lock

150735622
19880-045: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-200-3131
Access Cover

152003131
J59061138: RNCC: 3 | RNVC: 2

29 Nov 2005

5340-15-060-2896
Screw Thread Insert

150602896
1276-05-658: RNCC: 3 | RNVC: 2
M 8 X125 2,5D: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-089-5805
Butt Hinge

150895805
16956-150: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-052-1296
Loop Clamp

150521296
N0R2-505-06-31B: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-104-4375
Expansion Plug

151044375
586720: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-117-4204
Mending Plate

151174204
142514109: RNCC: 3 | RNVC: 2

4 Oct 1993

5340-15-129-7333
Angle Bracket

151297333
874153: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-144-9527
Plug Button

151449527
14592587: RNCC: 3 | RNVC: 2

24 Feb 1997

5340-15-063-5977
Clamping Catch

150635977
5941051: RNCC: 3 | RNVC: 2
5941051: RNCC: 5 | RNVC: 9

13 Nov 1982

5340-15-160-8570
Coat And Hat Hook

151608570
F720140001: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-052-1344
Retaining Strap

150521344
H788-11-38: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-179-7140
Mounting Bracket

151797140
0000500406274: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-153-3970
Mending Plate

151533970
5137-402-10: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-045-4687
Loop Clamp

150454687
N0R2-505-06-37A: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-155-3277
Loop Clamp

151553277
60190772: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-15-214-4001
Key Holder

152144001
ART2064: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-118-3858
Mending Plate

151183858
60161525: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-074-3973
Retaining Strap

150743973
14UNI2135CD: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-121-7958
Bow Handle

151217958
142520155: RNCC: 3 | RNVC: 2

21 Feb 1996

5340-15-101-5352
Retaining Strap

151015352
000200282200: RNCC: 5 | RNVC: 2
000200282200: RNCC: 5 | RNVC: 9

17 Oct 1987

5340-15-118-4500
Angle Bracket

151184500
60151516: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-100-8818
Angle Bracket

151008818
328340G1: RNCC: 3 | RNVC: 2
328340G1: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-113-0094
Retaining Strap

151130094
44999300000: RNCC: 3 | RNVC: 2
93155434: RNCC: 5 | RNVC: 2

23 Feb 1989

5340-15-118-6618
Angle Bracket

151186618
75208124: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-113-9748
Catch Strike

151139748
42492722: RNCC: 3 | RNVC: 2

31 Mar 1992

5340-15-050-0965
Handle Grip

150500965
011-2443: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-001-3424
Access Cover

150013424
928-0927/01: RNCC: 3 | RNVC: 2

17 Jun 2013

5340-15-103-2686
Screw Thread Insert

151032686
5129-220-02: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-060-7526
Expansion Plug

150607526
55UNI1663C7-3145CDCR: RNCC: 2 | RNVC: 2

28 Sep 1981

5340-15-154-6529
Leather Strap

151546529
541-31-3480: RNCC: 2 | RNVC: 3
554131348000: RNCC: 2 | RNVC: 3

31 Jul 2001

5340-15-102-6994
Hand Crank

151026994
182598: RNCC: 3 | RNVC: 2

10 Aug 1987

5340-15-118-6628
Mending Plate

151186628
75214936: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-179-8923
Access Cover

151798923
D1402507: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-175-0481
Metal Grille

151750481
164.2917: RNCC: 3 | RNVC: 2

29 Dec 2003

5340-15-179-2668
Mounting Bracket

151792668
D1-85123-401: RNCC: 3 | RNVC: 2

10 Aug 2006

5340-15-148-3476
Mending Plate

151483476
102256: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-055-7716
Screw Thread Insert

150557716
50041012: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-156-2645
Angle Bracket

151562645
0550149: RNCC: 3 | RNVC: 2
(241)A97720550149: RNCC: 5 | RNVC: 2

20 Dec 2002

5340-15-206-4719
Mending Plate

152064719
109-3010-01-45: RNCC: 3 | RNVC: 2

13 Jun 2012

5340-15-115-5344
Handle Grip

151155344
S35N10DE35-NERA: RNCC: 3 | RNVC: 2

6 Jun 1994

5340-15-006-8206
Rod End Clevis

150068206
GC506-31-01-01: RNCC: 3 | RNVC: 2

21 Apr 1976

5340-15-118-3409
Loop Clamp

151183409
60141536: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-067-9303
Angle Bracket

150679303
23165-102: RNCC: 3 | RNVC: 2

3 Mar 1986

5340-15-001-1773
Access Cover

150011773
504126473: RNCC: 3 | RNVC: 2

3 Jun 2013

5340-15-195-4796
Expansion Shield

151954796
42728648: RNCC: 3 | RNVC: 2
(241)ACA6442728648: RNCC: 5 | RNVC: 2

29 Mar 2011

5340-15-000-7247
Retaining Strap

150007247
BRP-0120960: RNCC: 3 | RNVC: 2

3 Apr 2013

5340-15-152-3503
Angle Bracket

151523503
0-159192: RNCC: 3 | RNVC: 2
00159192: RNCC: 3 | RNVC: 2
(241)A39630-159192: RNCC: 5 | RNVC: 2

4 Sep 2000

5340-15-153-2565
Stand Base

151532565
122606216: RNCC: 2 | RNVC: 3

12 Dec 2000

5340-15-201-3070
Access Cover

152013070
162520234: RNCC: 3 | RNVC: 2

20 Jul 2006

5340-15-063-2760
Retaining Strap

150632760
60108149: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-178-6496
Mounting Plate

151786496
2231.069.0007: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-118-6535
Plug Button

151186535
70921244: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-000-0646
Access Cover

150000646
182718638: RNCC: 3 | RNVC: 2

23 Jan 2013

5340-15-105-8392
Retaining Band

151058392
277-3630-26: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-194-2045
Handwheel

151942045
72871: RNCC: 3 | RNVC: 2

5 Oct 2010

5340-15-102-2723
Angle Bracket

151022723
1455-31-203: RNCC: 3 | RNVC: 2
01-261-31-203: RNCC: 5 | RNVC: 2

27 Oct 1987

5340-15-000-5509
Mounting Plate

150005509
13HJ04643228S01-801-002: RNCC: 3 | RNVC: 2

15 Mar 2013

5340-15-148-1555
Access Cover

151481555
98471295: RNCC: 3 | RNVC: 2
A040015-017: RNCC: 5 | RNVC: 2

25 Jun 1998

5340-15-061-2724
Angle Bracket

150612724
CTT84-13: RNCC: 3 | RNVC: 2

18 Feb 1977

5340-15-062-7362
Webbing Strap

150627362
CL 834.15: RNCC: 3 | RNVC: 2

26 Nov 1980

5340-15-003-3704
Access Cover

150033704
0152.120.008.00: RNCC: 3 | RNVC: 2

4 Nov 2013

5340-15-109-7232
Angle Bracket

151097232
60140170: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-180-3144
Mechanical Stop

151803144
(241)A4249504080805: RNCC: 3 | RNVC: 2
504080805: RNCC: 3 | RNVC: 2

18 Apr 2008

5340-15-111-3800
Strap Hinge

151113800
113A6031-003: RNCC: 3 | RNVC: 2

7 Sep 1990

5340-15-118-6940
Access Cover

151186940
73134355: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-074-3954
Retaining Strap

150743954
7UNI2134: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-119-5573
Mending Plate

151195573
4885330: RNCC: 3 | RNVC: 2

19 Sep 1994

5340-15-205-4185
Retaining Strap

152054185
178904534: RNCC: 3 | RNVC: 2
(241)A0199178904534: RNCC: 5 | RNVC: 2

8 Mar 2012

5340-15-066-2733
Angle Bracket

150662733
1376-31-104: RNCC: 3 | RNVC: 2
137631104: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-007-0572
Lock-Release Lever

150070572
1026-05-005: RNCC: 3 | RNVC: 2

29 Jul 1979

5340-15-195-8380
Door Handle

151958380
101435: RNCC: 3 | RNVC: 2
(241)A3593101435: RNCC: 5 | RNVC: 2

18 May 2011

5340-15-203-8545
Recess Handle

152038545
410-025-006: RNCC: 3 | RNVC: 2
(241)A1823410-025-006: RNCC: 5 | RNVC: 2

7 Jul 2011

5340-15-151-4599
Mounting Bracket

151514599
UMGX0000200: RNCC: 3 | RNVC: 2

29 May 2000

5340-15-001-7901
Mounting Bracket

150017901
5949788674: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-122-9052
Lever Bracket

151229052
537253-1: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-112-3530
Butt Hinge Leaf

151123530
60148775: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-108-7298
Ball Socket Seat

151087298
39A510-12-40-01: RNCC: 3 | RNVC: 2

19 Jul 1989

5340-15-206-7913
Mounting Plate

152067913
191100257: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-117-4210
Mending Plate

151174210
132507146: RNCC: 3 | RNVC: 2

4 Oct 1993

5340-15-008-0421
Mending Plate

150080421
1235-81-107: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-113-0821
Butt Hinge Leaf

151130821
109-0711-80-109: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-15-150-3483
Mounting Bracket

151503483
60-12824-01: RNCC: 3 | RNVC: 2

29 Sep 1999

5340-15-202-8820
Angle Bracket

152028820
A6122-94005-106: RNCC: 3 | RNVC: 2
(241)A0126A6122-94005-106: RNCC: 5 | RNVC: 2

13 Sep 2007

5340-15-008-0561
Loop Clamp

150080561
60112998: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-002-7603
Mounting Bracket

150027603
NN71767P01: RNCC: 3 | RNVC: 2

27 Sep 2013

5340-15-118-8237
Access Cover

151188237
9448228: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-127-5850
Retaining Ring

151275850
972020: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-057-2829
Screw Thread Insert

150572829
1276-12-116: RNCC: 3 | RNVC: 2
127612116: RNCC: 5 | RNVC: 2

31 Dec 1975

5340-15-009-1390
Angle Bracket

150091390
4604104: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-180-0332
Mounting Plate

151800332
2980426: RNCC: 3 | RNVC: 2

16 Nov 2007

5340-15-187-9080
Protection Bellows

151879080
5894452: RNCC: 3 | RNVC: 2

20 May 2009

5340-15-164-8847
Handle Grip

151648847
TIP0FR0: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-204-9026
Access Cover

152049026
71.2236.36: RNCC: 3 | RNVC: 2

25 Jan 2012

5340-15-122-2934
Protection Bellows

151222934
800074932: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-062-5282
Mending Plate

150625282
1113-22-110: RNCC: 3 | RNVC: 2
1113-22.110: RNCC: 5 | RNVC: 2

2 Dec 1981

5340-15-150-0976
Flush Lock

151500976
083030098: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-001-5984
Mounting Bracket

150015984
5801547599: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-009-3737
Screw Thread Insert

150093737
1-1-0384: RNCC: 3 | RNVC: 2

27 Oct 1980

5340-15-206-3554
Mounting Bracket

152063554
50040 4747: RNCC: 3 | RNVC: 2

4 Jun 2012

5340-15-145-3176
Hand Crank

151453176
D1415836: RNCC: 3 | RNVC: 2

15 Dec 1997

5340-15-003-9121
Mounting Plate

150039121
182741325: RNCC: 3 | RNVC: 2
(241)A0199182741325: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-120-2505
Webbing Strap

151202505
60159179: RNCC: 3 | RNVC: 2

6 Mar 1995

5340-15-120-3543
Angle Bracket

151203543
60175338: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-109-1834
Mending Plate

151091834
1361809: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-153-2482
Handle Grip

151532482
122505625: RNCC: 3 | RNVC: 2

12 Dec 2000

5340-15-207-5967
Retaining Strap

152075967
178904750: RNCC: 3 | RNVC: 2
(241)A0199178904750: RNCC: 5 | RNVC: 2

5 Nov 2012

5340-15-001-1086
Mounting Bracket

150011086
5801392203: RNCC: 3 | RNVC: 2

31 May 2013

5340-15-118-7650
Mounting Bracket

151187650
4600128: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-188-5168
Mounting Bracket

151885168
500377680: RNCC: 3 | RNVC: 2
Z04.04.03.21: RNCC: 5 | RNVC: 2
5340PL0956569: RNCC: 6 | RNVC: 9

29 Sep 2009

5340-15-178-6294
Mounting Bracket

151786294
M7274: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-116-0531
Plain Solid Disk

151160531
1P 316824: RNCC: 3 | RNVC: 2
1P 316824: RNCC: 5 | RNVC: 9

10 Jun 1994

5340-15-009-3275
Angle Bracket

150093275
P-884044-002: RNCC: 3 | RNVC: 2

12 Sep 1980

Load More Results