What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 15 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 15 of 72

5340-15-154-3420
Bail Handle

151543420
A257A001A: RNCC: 3 | RNVC: 2

4 May 2001

5340-15-178-3315
Plug Button

151783315
999-5001-13-32: RNCC: 3 | RNVC: 2

29 Apr 2005

5340-15-187-5573
Bow Handle

151875573
TAF-0007/01: RNCC: 3 | RNVC: 2

9 Apr 2009

5340-15-108-3121
Angle Bracket

151083121
60123124: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-001-1790
Mounting Bracket

150011790
504376777: RNCC: 3 | RNVC: 2

3 Jun 2013

5340-15-152-7429
Loop Clamp

151527429
3161T2062: RNCC: 3 | RNVC: 2
21612062: RNCC: 3 | RNVC: 2
(241)A361821612062: RNCC: 4 | RNVC: 1
3161G2062: RNCC: 5 | RNVC: 2

20 Oct 2000

5340-15-163-3565
Loop Clamp

151633565
17764992: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-068-3441
Tee Hinge

150683441
RS 401 500 B: RNCC: 3 | RNVC: 2

27 Oct 1984

5340-15-063-9252
Expansion Plug

150639252
9-8990-02: RNCC: 3 | RNVC: 2

6 Dec 1982

5340-15-189-2667
Access Cover

151892667
390501015: RNCC: 3 | RNVC: 2
0390501015: RNCC: 5 | RNVC: 2

10 Feb 2010

5340-15-107-5343
Retaining Strap

151075343
SR 1842: RNCC: 3 | RNVC: 2

22 Mar 1988

5340-15-109-0159
Retaining Band

151090159
60101172: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-206-9119
Snap Hook

152069119
PLUME K3W: RNCC: 3 | RNVC: 2
91913934: RNCC: 5 | RNVC: 2

26 Jul 2012

5340-15-203-4143
Snap Hook

152034143
77339050: RNCC: 3 | RNVC: 2

24 Jan 2008

5340-15-001-2623
Caster Wheel

150012623
1RGK1250GMT: RNCC: 3 | RNVC: 2

11 Jun 2013

5340-15-129-6454
Angle Bracket

151296454
4010902: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-187-1428
Loop Clamp

151871428
2471.111: RNCC: 3 | RNVC: 2
2471.111: RNCC: 5 | RNVC: 2

19 Feb 2009

5340-15-114-3538
Corner Brace

151143538
5216-239-19: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-15-062-7842
Mending Plate

150627842
1/279616: RNCC: 3 | RNVC: 2
1279616: RNCC: 5 | RNVC: 2
9920081: RNCC: 5 | RNVC: 2

27 Mar 1981

5340-15-151-7277
Retaining Strap

151517277
00102257: RNCC: 3 | RNVC: 2
0-102257: RNCC: 3 | RNVC: 2
(241)A39630-102257: RNCC: 5 | RNVC: 2
1PA39630-102257: RNCC: 5 | RNVC: 2

4 Jul 2000

5340-15-148-5802
Butt Hinge

151485802
129-0331-34-159: RNCC: 3 | RNVC: 2

31 Aug 1998

5340-15-063-5106
Angle Bracket

150635106
60114153: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-112-3502
Angle Bracket

151123502
60151239: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-051-3714
Retaining Ring

150513714
9913179: RNCC: 3 | RNVC: 2
9913179: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-188-1676
Snap Hook

151881676
360XX: RNCC: 3 | RNVC: 2

24 Jul 2009

5340-15-121-0979
Door Handle

151210979
RC3125: RNCC: 3 | RNVC: 2

23 Jan 1996

5340-15-157-6148
Angle Bracket

151576148
11031203: RNCC: 3 | RNVC: 2
(241)A977211031203: RNCC: 5 | RNVC: 2

9 Oct 2003

5340-15-007-2227
Angle Bracket

150072227
1398375: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-100-8278
Hand Crank

151008278
21460024A: RNCC: 3 | RNVC: 2

1 Apr 1998

5340-15-169-2477
Coat And Hat Hook

151692477
F72009835: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-002-8812
Mounting Bracket

150028812
TANKFIX01: RNCC: 3 | RNVC: 2

14 Oct 2013

5340-15-152-0167
Angle Bracket

151520167
0-162516: RNCC: 3 | RNVC: 2

2 Aug 2000

5340-15-181-2502
Mounting Bracket

151812502
0126338A01: RNCC: 3 | RNVC: 2
(241)A00690126338A01: RNCC: 5 | RNVC: 2

20 Nov 2008

5340-15-102-8534
Butt Hinge

151028534
213A7172-401: RNCC: 3 | RNVC: 2

16 Dec 1988

5340-15-109-7716
Access Cover

151097716
403/12: RNCC: 3 | RNVC: 2

19 Mar 1990

5340-15-193-9439
Mounting Bracket

151939439
109-0612-18-109: RNCC: 3 | RNVC: 2

2 Aug 2010

5340-15-113-3567
Retaining Strap

151133567
73042646: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-179-4723
Access Cover

151794723
3AN49453AA**: RNCC: 3 | RNVC: 2

22 Jan 2007

5340-15-197-5535
Retaining Band

151975535
PN UAS 00047606: RNCC: 3 | RNVC: 2
4730F76037664: RNCC: 5 | RNVC: 9

8 Apr 2004

5340-15-207-1033
Access Cover

152071033
552607012000: RNCC: 3 | RNVC: 2
(241)A1140552607012000: RNCC: 5 | RNVC: 2

4 Sep 2012

5340-15-201-4141
Loop Clamp

152014141
504026220: RNCC: 3 | RNVC: 2
(241)A4249504026220: RNCC: 5 | RNVC: 2

24 Aug 2006

5340-15-103-7694
Plain Solid Disk

151037694
2PM8160-9: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-119-0272
Angle Bracket

151190272
70687676: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-116-3492
Mending Plate

151163492
200291687: RNCC: 3 | RNVC: 2

28 Apr 1993

5340-15-119-5562
Handle Grip

151195562
8529022: RNCC: 3 | RNVC: 2

19 Sep 1994

5340-15-109-7250
Angle Bracket

151097250
60134891: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-116-4905
Retaining Strap

151164905
4710965: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-062-1978
Angle Bracket

150621978
P-892823-001: RNCC: 3 | RNVC: 2
P892823-001: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-151-1449
Mounting Bracket

151511449
380-2392/01: RNCC: 3 | RNVC: 2

30 Mar 2000

5340-15-062-9258
Retaining Strap

150629258
0-101916: RNCC: 3 | RNVC: 2

29 Apr 1981

5340-15-060-8242
Detent Plunger

150608242
H50A47: RNCC: 5 | RNVC: 2
H50A47: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-163-0246
Rim Lock Set

151630246
MECC21939: RNCC: 3 | RNVC: 2

14 May 2002

5340-15-073-5277
Mortise Lock Set

150735277
P1169: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-073-8762
Rim Lock

150738762
39B90X50CR0MATA: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-108-6292
Strap Hinge

151086292
93919413: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-155-0191
Dashpot Piston

151550191
1PA91727316322711000: RNCC: 3 | RNVC: 2
7316322711000: RNCC: 3 | RNVC: 2

8 Jan 2002

5340-15-108-4229
Retaining Band

151084229
4668862: RNCC: 3 | RNVC: 2

5 Jan 1989

5340-15-116-4094
Angle Bracket

151164094
145502154: RNCC: 3 | RNVC: 2

18 May 1993

5340-15-155-1439
Self-Locking Insert

151551439
M4X6: RNCC: 3 | RNVC: 2

18 Jan 2002

5340-15-063-0609
Retaining Strap

150630609
0-100415: RNCC: 3 | RNVC: 2

30 Apr 1982

5340-15-179-1249
T Bracket

151791249
71930008: RNCC: 3 | RNVC: 2

13 Jun 2006

5340-15-193-9954
Flush Catch

151939954
109-0360-24-105: RNCC: 3 | RNVC: 2

12 Aug 2010

5340-15-119-2366
Vent Plug

151192366
894-03: RNCC: 3 | RNVC: 2
894-03: RNCC: 5 | RNVC: 9

4 Jul 1994

5340-15-109-3718
Mending Plate

151093718
5137-292-10: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-120-0203
Catch Strike

151200203
79017749: RNCC: 3 | RNVC: 2

5 Dec 1994

5340-15-118-0907
Valve Seat

151180907
D0469371: RNCC: 3 | RNVC: 2
469371: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-001-8254
Mounting Bracket

150018254
5949789059: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-195-2644
Mounting Bracket

151952644
3003C500F1: RNCC: 3 | RNVC: 2
3003C500F1: RNCC: 5 | RNVC: 2

9 Mar 2011

5340-15-188-2692
Access Cover

151882692
400325P1-02: RNCC: 3 | RNVC: 2

1 Sep 2009

5340-15-179-2665
Mounting Bracket

151792665
D1-85118-401: RNCC: 3 | RNVC: 2

10 Aug 2006

5340-15-008-3847
Retaining Strap

150083847
4659219: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-064-8074
Angle Bracket

150648074
60120673: RNCC: 3 | RNVC: 2

17 Nov 1983

5340-15-120-4458
Mending Plate

151204458
142502431: RNCC: 3 | RNVC: 2

25 May 1995

5340-15-163-3781
Mechanical Stop

151633781
9437219: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-108-3080
Spring Tension Clip

151083080
1/45780/82: RNCC: 3 | RNVC: 2
14578082: RNCC: 5 | RNVC: 2

14 Jun 1988

5340-15-101-8520
Retaining Strap

151018520
808-73135-1: RNCC: 3 | RNVC: 2

23 Dec 1987

5340-15-150-6023
Mending Plate

151506023
0-106135: RNCC: 3 | RNVC: 2
106135: RNCC: 3 | RNVC: 2
(241)A39630-106135: RNCC: 5 | RNVC: 2
1PA39630-106135: RNCC: 5 | RNVC: 2

6 Dec 1999

5340-15-065-7384
Catch Strike

150657384
27-159-17: RNCC: 3 | RNVC: 2

1 Apr 1985

5340-15-109-3891
Mending Plate

151093891
5137-014-17: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-157-9184
Angle Bracket

151579184
0-163958: RNCC: 3 | RNVC: 2
(241)A39630-163958: RNCC: 5 | RNVC: 2
1PA39630-163958: RNCC: 5 | RNVC: 2

24 Nov 2003

5340-15-201-4186
Expansion Plug

152014186
21770082A: RNCC: 3 | RNVC: 2

27 Aug 2006

5340-15-110-0304
Retaining Strap

151100304
20435-102: RNCC: 3 | RNVC: 2

12 Mar 1990

5340-15-147-5984
Mounting Bracket

151475984
835138-01: RNCC: 3 | RNVC: 2
835138-01: RNCC: 5 | RNVC: 9

30 Dec 1997

5340-15-110-8548
Screw Thread Insert

151108548
2106-02569: RNCC: 3 | RNVC: 2
210602569: RNCC: 3 | RNVC: 2
M 10 X150 2D: RNCC: 5 | RNVC: 2

30 Jan 1990

5340-15-007-5382
Screw Thread Insert

150075382
2106-02-564: RNCC: 3 | RNVC: 2
M 5 X 80 2D: RNCC: 5 | RNVC: 2

5 Apr 1994

5340-15-119-0813
Loop Clamp

151190813
70928176: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-187-2105
Mounting Bracket

151872105
VR0406: RNCC: 3 | RNVC: 2
(241)A3980VR0406: RNCC: 5 | RNVC: 2

24 Feb 2009

5340-15-153-6875
Loop Clamp

151536875
142068025: RNCC: 3 | RNVC: 2

20 Feb 2001

5340-15-177-4308
Bridge Clamp

151774308
050812: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-118-4586
Loop Clamp

151184586
60152172: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-153-9055
Mounting Bracket

151539055
9423T2: RNCC: 3 | RNVC: 2
(241)A333400084232: RNCC: 4 | RNVC: 1
00084232: RNCC: 5 | RNVC: 2

9 Mar 2001

5340-15-152-2506
T Plate

151522506
5AY PSAC 014: RNCC: 3 | RNVC: 2

17 Aug 2000

5340-15-179-7059
Angle Bracket

151797059
0000500411576: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-117-0025
Loop Clamp

151170025
79042208: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-153-4306
Mortise Latch

151534306
308-0941/28: RNCC: 3 | RNVC: 2

22 Jan 2001

5340-15-121-3309
Mounting Plate

151213309
463-069610.002: RNCC: 3 | RNVC: 2

7 Nov 1995

5340-15-156-9804
Mounting Bracket

151569804
377-020-020: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-15-179-2664
Mounting Bracket

151792664
D1-85117-401: RNCC: 3 | RNVC: 2

10 Aug 2006

5340-15-004-3751
Rod End Clevis

150043751
66451-101A1: RNCC: 3 | RNVC: 2

22 Jun 1978

5340-15-188-6056
Mounting Bracket

151886056
A-112333/48-30: RNCC: 3 | RNVC: 2

13 Oct 2009

5340-15-170-9146
Loop Clamp

151709146
154220505: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-150-1017
Mounting Bracket

151501017
120013359: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-195-0163
Mounting Bracket

151950163
TSPM1: RNCC: 3 | RNVC: 2
(241)AD050TSPM1: RNCC: 5 | RNVC: 2

16 Feb 2011

5340-15-151-7315
Angle Bracket

151517315
0-179960: RNCC: 3 | RNVC: 2

4 Jul 2000

5340-15-121-6446
Mounting Bracket

151216446
800046461: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-117-8940
Handle Grip

151178940
84763382: RNCC: 3 | RNVC: 2

28 Jan 1994

5340-15-170-7180
Loop Clamp

151707180
3630.050: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-068-4513
Cushioning Pad

150684513
G3: RNCC: 3 | RNVC: 2

13 Mar 1986

5340-15-179-6868
Mounting Bracket

151796868
0000500400953: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-117-9092
Butt Hinge Leaf

151179092
214A2028-018: RNCC: 3 | RNVC: 2

31 Jan 1994

5340-15-007-4963
Mending Plate

150074963
1139-02-147: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-064-5910
Retaining Strap

150645910
1392208: RNCC: 3 | RNVC: 2

17 Nov 1983

5340-15-103-7780
Loop Clamp

151037780
102732: RNCC: 3 | RNVC: 2
1PA3963102732: RNCC: 5 | RNVC: 2

8 Mar 1988

5340-15-003-4672
Lock-Release Lever

150034672
182707545: RNCC: 3 | RNVC: 2
(241)A0199182707545: RNCC: 5 | RNVC: 2

14 Nov 2013

5340-15-193-7111
Mounting Bracket

151937111
4215314-00: RNCC: 3 | RNVC: 2

2 Jul 2010

5340-15-009-7786
Rod End Clevis

150097786
1/00010/71: RNCC: 3 | RNVC: 2
10001071: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-057-9183
Loop Clamp

150579183
AI41-85A: RNCC: 3 | RNVC: 2
AI41-85A: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-112-6352
Angle Bracket

151126352
PI20296-001: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-053-9986
Rod End Clevis

150539986
260-12-18-1: RNCC: 3 | RNVC: 2
260-12-18-1: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-102-8069
Butt Hinge

151028069
211A7122-403: RNCC: 3 | RNVC: 2

27 Oct 1988

5340-15-204-2999
Loop Clamp

152042999
A708AA08: RNCC: 3 | RNVC: 2
(241)A0126A708AA08: RNCC: 5 | RNVC: 2

19 Oct 2011

5340-15-119-0955
Mounting Bracket

151190955
71005111: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-204-0276
Spring Window Bolt

152040276
71485249: RNCC: 3 | RNVC: 2

19 Aug 2011

5340-15-073-5224
Rim Lock

150735224
39A55X24: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-004-0546
Butt Hinge

150040546
1137-19-025: RNCC: 3 | RNVC: 2

30 May 1977

5340-15-177-3764
Mounting Plate

151773764
028637: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-074-4003
Retaining Strap

150744003
8UNI2138: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-111-4190
Angle Bracket

151114190
329157P1: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-103-1012
Loop Clamp

151031012
DE013.13.610: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-178-9865
T Bracket

151789865
Q 4 3172 9002: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-105-8391
Retaining Band

151058391
001.3840.0: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-062-9241
Mending Plate

150629241
0-101586: RNCC: 3 | RNVC: 2

28 Aug 1981

5340-15-204-3329
Mounting Bracket

152043329
0000500428659: RNCC: 3 | RNVC: 2
(241)A39630000500428659: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-178-5401
Access Cover

151785401
1K.71.811.2: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-178-2376
Mounting Plate

151782376
982150439: RNCC: 3 | RNVC: 2

11 Mar 2005

5340-15-109-4866
Angle Bracket

151094866
1Q 579681: RNCC: 3 | RNVC: 2
1Q 579681: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-003-9177
Retaining Strap

150039177
182707256: RNCC: 3 | RNVC: 2
(241)A0199182707256: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-003-4637
Access Cover

150034637
182714127: RNCC: 3 | RNVC: 2
(241)A0199182714127: RNCC: 5 | RNVC: 2

14 Nov 2013

5340-15-000-4132
Snap Hook

150004132
N717U5009201: RNCC: 3 | RNVC: 2

28 Feb 2013

5340-15-108-9871
Angle Bracket

151089871
60106279: RNCC: 3 | RNVC: 2

9 May 1988

5340-15-109-1828
Mending Plate

151091828
1368111: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-108-8426
Ball Socket Seat

151088426
04416A: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-051-7991
Loop Clamp

150517991
1-21706-90: RNCC: 3 | RNVC: 2
12170690: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-187-2038
Mounting Bracket

151872038
SC 100 665: RNCC: 3 | RNVC: 2
(241)A3980SC100665: RNCC: 5 | RNVC: 2

24 Feb 2009

5340-15-149-9197
Mounting Bracket

151499197
028838/2: RNCC: 3 | RNVC: 2
(241)A3334028838/2: RNCC: 5 | RNVC: 2

25 Jun 1999

5340-15-058-8881
Loop Clamp

150588881
LOPINGMOD1: RNCC: 3 | RNVC: 2

30 Dec 1974

5340-15-004-2838
Access Door Hinge

150042838
N83514T19818: RNCC: 3 | RNVC: 2

24 Feb 1978

5340-15-153-7744
Access Cover

151537744
02700A132960: RNCC: 5 | RNVC: 2
02700A132960: RNCC: 5 | RNVC: 9

28 Feb 2001

5340-15-112-3486
Angle Bracket

151123486
4837071: RNCC: 3 | RNVC: 2
(7001)5340151123486: RNCC: 5 | RNVC: 2

7 Oct 1989

5340-15-003-0038
Protection Bellows

150030038
42562938: RNCC: 3 | RNVC: 2
(241)A424942562938: RNCC: 5 | RNVC: 2

22 Oct 2013

5340-15-109-2008
Angle Bracket

151092008
42089104: RNCC: 3 | RNVC: 2

23 Feb 1989

5340-15-105-8405
Retaining Band

151058405
15559: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-054-4211
Retaining Ring

150544211
945700P: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-193-9981
Flush Catch

151939981
109-0325-34-107: RNCC: 3 | RNVC: 2

12 Aug 2010

5340-15-195-0570
Butt Hinge

151950570
ET 00 14 31: RNCC: 3 | RNVC: 2

18 Feb 2011

5340-15-006-4299
Spring Tension Clip

150064299
1-01247-76: RNCC: 3 | RNVC: 2
1-01247-76: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-152-1253
Retaining Strap

151521253
60165554: RNCC: 3 | RNVC: 2

7 Aug 2000

5340-15-128-4145
Handle Grip

151284145
FGMTPH16TZ3: RNCC: 3 | RNVC: 2
FGMTPH16TZ3: RNCC: 5 | RNVC: 2
FGMTPH16TZ3: RNCC: 5 | RNVC: 9

9 Oct 1996

5340-15-120-4459
Mending Plate

151204459
142502269: RNCC: 3 | RNVC: 2

25 May 1995

5340-15-169-4801
Angle Bracket

151694801
F72013084: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-153-7750
Access Cover

151537750
02700A136720: RNCC: 5 | RNVC: 2
02700A136720: RNCC: 5 | RNVC: 9

28 Feb 2001

5340-15-203-7229
Mounting Plate

152037229
00233R0130: RNCC: 3 | RNVC: 2
CV173762: RNCC: 5 | RNVC: 2
00233R0130: RNCC: 5 | RNVC: 2

27 Jun 2011

5340-15-154-3939
Webbing Strap

151543939
10015302: RNCC: 3 | RNVC: 2
(241)A977210015302: RNCC: 5 | RNVC: 2

22 May 2001

5340-15-102-9565
Butt Hinge Leaf

151029565
808-17211-7: RNCC: 3 | RNVC: 2

23 Aug 1988

5340-15-154-4041
Angle Bracket

151544041
A6120-91094-3: RNCC: 3 | RNVC: 2

22 May 2001

5340-15-161-1996
Retaining Clip

151611996
TM0502-011-4: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-15-153-5257
Filler Opening Cap

151535257
442000000/72/04: RNCC: 3 | RNVC: 2
ICF 16: RNCC: 5 | RNVC: 2

7 Feb 2001

5340-15-001-7861
Mounting Plate

150017861
5949789338: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-073-8821
Retaining Strap

150738821
ASUNAV1046A37-743: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-187-5719
Bow Handle

151875719
TAK-0161/01: RNCC: 3 | RNVC: 2

9 Apr 2009

5340-15-004-4342
Rod End Clevis

150044342
66015-101: RNCC: 3 | RNVC: 2

21 Mar 1978

5340-15-005-4893
Detent Plunger

150054893
1026-01-186: RNCC: 3 | RNVC: 2

8 Jan 1998

5340-15-157-9169
Angle Bracket

151579169
0-163689: RNCC: 3 | RNVC: 2
(241)A39630-163689: RNCC: 5 | RNVC: 2
1PA39630-163689: RNCC: 5 | RNVC: 2

24 Nov 2003

5340-15-204-3003
Mounting Bracket

152043003
N635G1100101: RNCC: 3 | RNVC: 2
(241)A0126N635G1100101: RNCC: 5 | RNVC: 2

19 Oct 2011

5340-15-199-4651
Block Clamp

151994651
A464A006A: RNCC: 3 | RNVC: 2
(241)A0126A464A006A: RNCC: 5 | RNVC: 2

12 Apr 2005

5340-15-153-5206
Access Cover

151535206
142041813: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-002-8151
Mounting Plate

150028151
5801359272: RNCC: 3 | RNVC: 2

3 Oct 2013

5340-15-005-6459
Retaining Ring

150056459
0-21118: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-130-8440
Handle Grip

151308440
2726-5: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-001-1109
Mounting Bracket

150011109
5801360002: RNCC: 3 | RNVC: 2

31 May 2013

5340-15-179-9714
Access Cover

151799714
ECC24/25 REP11: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-112-8161
Lever Bracket

151128161
469589: RNCC: 3 | RNVC: 2
D0469589: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-116-4748
Butt Hinge Leaf

151164748
60166444: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-177-7249
Bow Handle

151777249
9438574: RNCC: 3 | RNVC: 2

4 Jun 2004

5340-15-009-1389
Angle Bracket

150091389
4613688: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-120-4518
Access Cover

151204518
142505173: RNCC: 3 | RNVC: 2

25 May 1995

5340-15-114-4831
Handle Grip

151144831
S25-N6: RNCC: 3 | RNVC: 2
S25-N6: RNCC: 5 | RNVC: 2
S25-N6: RNCC: 5 | RNVC: 9

21 May 1993

5340-15-206-7928
Mounting Bracket

152067928
500400291: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-062-9201
Retaining Strap

150629201
0-100366: RNCC: 3 | RNVC: 2

9 Jul 1981

5340-15-153-6881
Loop Clamp

151536881
142068033: RNCC: 3 | RNVC: 2

20 Feb 2001

5340-15-187-2052
Mounting Bracket

151872052
SC 100 678: RNCC: 3 | RNVC: 2
(241)A3980SC100678: RNCC: 5 | RNVC: 2

24 Feb 2009

5340-15-207-3941
Mounting Bracket

152073941
ED0085456750-S: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-15-001-7879
Mounting Bracket

150017879
500438244: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-186-9003
Plug Button

151869003
049258: RNCC: 3 | RNVC: 2
0028526: RNCC: 5 | RNVC: 2

5 Jan 2009

5340-15-170-9177
Mounting Bracket

151709177
71466900: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-163-3755
Bridge Clamp

151633755
9435806: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-162-4065
Loop Clamp

151624065
3639.069: RNCC: 3 | RNVC: 2

16 Aug 2001

5340-15-180-5556
Loop Clamp

151805556
504087557: RNCC: 3 | RNVC: 2
(241)A4249504087557: RNCC: 5 | RNVC: 2

18 Jun 2008

5340-15-175-1141
Mounting Bracket

151751141
8545656: RNCC: 3 | RNVC: 2
470636SAV: RNCC: 5 | RNVC: 2

29 Dec 2003

5340-15-108-3103
Loop Clamp

151083103
60103086: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-002-8616
Mounting Bracket

150028616
C729404CH: RNCC: 3 | RNVC: 2

10 Oct 2013

5340-15-008-9773
Retaining Clip

150089773
53317: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-108-4222
Retaining Strap

151084222
4543282: RNCC: 3 | RNVC: 2

1 Apr 1998

5340-15-149-2900
Mending Plate

151492900
4862330: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-186-9284
Access Cover

151869284
134272: RNCC: 3 | RNVC: 2
0014784: RNCC: 5 | RNVC: 2

5 Jan 2009

5340-15-109-4606
Retaining Strap

151094606
1Q 531745: RNCC: 3 | RNVC: 2
1Q 531745: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-002-9325
Retaining Band

150029325
960475: RNCC: 3 | RNVC: 2
(241)A3593960475: RNCC: 5 | RNVC: 2

18 Oct 2013

5340-15-155-8220
Angle Bracket

151558220
60188710: RNCC: 3 | RNVC: 2

10 Jul 2002

5340-15-118-3632
Angle Bracket

151183632
60140259: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-002-5494
Elastic Strap

150025494
504235565: RNCC: 3 | RNVC: 2

3 Sep 2013

5340-15-009-1993
Retaining Band

150091993
1390664: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-122-4550
Angle Bracket

151224550
55: RNCC: 3 | RNVC: 2
55: RNCC: 5 | RNVC: 9

23 Jul 1996

5340-15-064-3748
Bow Handle

150643748
4701910: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-152-2038
Mending Plate

151522038
42159081: RNCC: 3 | RNVC: 2

10 Aug 2000

5340-15-107-8756
Angle Bracket

151078756
60117172: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-107-5344
Retaining Strap

151075344
SR 1715: RNCC: 3 | RNVC: 2

22 Mar 1988

5340-15-068-2168
Access Door Hinge

150682168
03926-101: RNCC: 3 | RNVC: 2

17 Apr 1986

5340-15-103-0041
Retaining Strap

151030041
73117739: RNCC: 3 | RNVC: 2

21 Jun 1987

5340-15-120-2732
Angle Bracket

151202732
60169765: RNCC: 3 | RNVC: 2

9 Mar 1995

5340-15-193-7876
Caster Wheel

151937876
CR6152: RNCC: 3 | RNVC: 2

13 Jul 2010

5340-15-180-4544
Mounting Plate

151804544
504240685: RNCC: 3 | RNVC: 2
(241)A4249504240685: RNCC: 5 | RNVC: 2

27 May 2008

5340-15-195-2178
Mounting Bracket

151952178
209712232: RNCC: 3 | RNVC: 2
CV173670: RNCC: 5 | RNVC: 2
209712232: RNCC: 5 | RNVC: 2

7 Mar 2011

5340-15-001-7940
Mounting Bracket

150017940
5949788177: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-204-3773
Mounting Bracket

152043773
0752873: RNCC: 3 | RNVC: 2
0752873: RNCC: 5 | RNVC: 2

26 Oct 2011

5340-15-148-5844
Butt Hinge Leaf

151485844
129-0370-12-109: RNCC: 3 | RNVC: 2

31 Aug 1998

5340-15-114-7915
Mending Plate

151147915
8934.00.09: RNCC: 3 | RNVC: 2

12 May 1993

5340-15-118-8011
Mounting Bracket

151188011
4840211: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-178-0429
Access Cover

151780429
400039A1: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-15-111-2817
Access Cover

151112817
DOA091017: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-114-0176
Access Cover

151140176
000205302850: RNCC: 5 | RNVC: 2
000205302850: RNCC: 5 | RNVC: 9

15 Apr 1992

5340-15-064-3729
Plug Button

150643729
4723932: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-155-3042
Angle Bracket

151553042
60185335: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-15-155-4591
Mounting Bracket

151554591
121020: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-15-151-5478
Mounting Bracket

151515478
980302: RNCC: 3 | RNVC: 2

7 Jun 2000

5340-15-001-8237
Mounting Bracket

150018237
5949790377: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-119-1975
Angle Bracket

151191975
75222156: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-104-4352
Expansion Plug

151044352
10160801: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-050-5292
Loop Clamp

150505292
03-605B20: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-179-8223
Pipe Hanger

151798223
AST75: RNCC: 3 | RNVC: 2
CAE01807: RNCC: 5 | RNVC: 2

3 Aug 2007

5340-15-156-5191
Filler Opening Cap

151565191
TCO500: RNCC: 3 | RNVC: 2
TCO500: RNCC: 5 | RNVC: 9

21 Feb 2003

5340-15-118-4461
Mending Plate

151184461
60152220: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-112-3476
Retaining Strap

151123476
60156042: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-152-2507
Mending Plate

151522507
D22 6604 22P: RNCC: 3 | RNVC: 2
D22 6604 22P: RNCC: 5 | RNVC: 2

17 Aug 2000

5340-15-102-1463
Mending Plate

151021463
8259.00.03: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-122-0094
Angle Bracket

151220094
60179927: RNCC: 3 | RNVC: 2

10 Apr 1996

5340-15-020-2592
Loop Clamp

150202592
01-098-01-89: RNCC: 3 | RNVC: 2
55.41.073.A: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-062-1957
Angle Bracket

150621957
P-892805-003: RNCC: 3 | RNVC: 2
P892805-003: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-107-6087
Butt Hinge Leaf

151076087
A72315-02-08: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-009-6358
Retaining Strap

150096358
1160222: RNCC: 3 | RNVC: 2

17 Oct 1980

5340-15-065-1113
Hand Crank

150651113
17883: RNCC: 3 | RNVC: 2

6 Mar 1984

5340-15-108-7092
Retaining Band

151087092
10292390: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-064-6019
Hand Crank

150646019
42411513: RNCC: 3 | RNVC: 2

6 May 1983

5340-15-195-1539
Bow Handle

151951539
6333105: RNCC: 3 | RNVC: 2
CMPG00260: RNCC: 5 | RNVC: 2
6333105: RNCC: 5 | RNVC: 2

4 Mar 2011

5340-15-007-8972
Expansion Plug

150078972
1-01607-01: RNCC: 3 | RNVC: 2
10160701: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-202-4577
Access Cover

152024577
928-0519/01: RNCC: 3 | RNVC: 2
(241)A4582928-0519/01: RNCC: 5 | RNVC: 2

27 Mar 2007

5340-15-109-4863
Angle Bracket

151094863
1Z 587435: RNCC: 3 | RNVC: 2
1Z 587435: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-103-1360
Mending Plate

151031360
DE013.13.550: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-109-0184
Angle Bracket

151090184
60105581: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-153-0311
Stand Base

151530311
1103.008: RNCC: 3 | RNVC: 2

15 Nov 2000

5340-15-077-1814
Angle Bracket

150771814
R41952P0S5R45038D0R06: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-120-4469
Mending Plate

151204469
132521125: RNCC: 3 | RNVC: 2

25 May 1995

5340-15-121-7406
Expansion Plug

151217406
60158839.00.07.00: RNCC: 3 | RNVC: 2
93158779: RNCC: 5 | RNVC: 2

12 Feb 1996

5340-15-189-0543
Bow Handle

151890543
0000500429920: RNCC: 3 | RNVC: 2
(241)A39630000500429920: RNCC: 5 | RNVC: 2

21 Jan 2010

5340-15-100-4499
Retaining Strap

151004499
08291-101A1: RNCC: 3 | RNVC: 2

24 Mar 1987

5340-15-108-7614
Angle Bracket

151087614
60136133: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-202-5594
Angle Bracket

152025594
N635G1084201: RNCC: 3 | RNVC: 2
(241)A0126N635G1084201: RNCC: 5 | RNVC: 2

8 May 2007

5340-15-155-0980
Retaining Bail

151550980
142003114: RNCC: 2 | RNVC: 3

18 Jan 2002

5340-15-158-5714
Access Cover

151585714
122621328: RNCC: 3 | RNVC: 2

9 Mar 2004

5340-15-144-7929
Metal Grille

151447929
GRG-AS40: RNCC: 3 | RNVC: 2

24 Jan 1997

5340-15-005-1089
Handle Grip

150051089
1137-03-106: RNCC: 3 | RNVC: 2

10 Apr 1978

5340-15-177-4403
Mounting Bracket

151774403
052276: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-197-1764
Rim Lock Set

151971764
PN UAS 00027257: RNCC: 3 | RNVC: 2
5340F76018177: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-064-2037
Screw Thread Insert

150642037
590-962-308: RNCC: 3 | RNVC: 2
590.962.308: RNCC: 5 | RNVC: 2
590.962.308: RNCC: 5 | RNVC: 2

6 Dec 1983

5340-15-108-9885
Support Hook

151089885
1383596: RNCC: 3 | RNVC: 2

9 May 1988

5340-15-054-9012
Bow Handle

150549012
7206: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-131-6653
Angle Bracket

151316653
658338: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-121-9995
Angle Bracket

151219995
60175478: RNCC: 3 | RNVC: 2

10 Apr 1996

5340-15-148-6558
Angle Bracket

151486558
190525146: RNCC: 3 | RNVC: 2

17 Sep 1998

5340-15-120-2491
Angle Bracket

151202491
98473354: RNCC: 3 | RNVC: 2

6 Mar 1995

5340-15-177-3751
Mounting Plate

151773751
026941: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-149-9251
Bow Handle

151499251
00024037: RNCC: 3 | RNVC: 2

25 Jun 1999

5340-15-119-0722
Expansion Plug

151190722
70926266: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-009-6382
Mending Plate

150096382
174163P2: RNCC: 3 | RNVC: 2

17 Oct 1980

5340-15-162-5500
Compression Cup

151625500
4152462: RNCC: 3 | RNVC: 2

25 Sep 2001

5340-15-181-0893
Access Cover

151810893
190533100: RNCC: 3 | RNVC: 2

21 Oct 2008

5340-15-103-2937
Angle Bracket

151032937
5087: RNCC: 3 | RNVC: 2

26 Nov 1988

5340-15-119-0121
Retaining Band

151190121
70198775: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-003-8338
Bow Handle

150038338
006101820008: RNCC: 5 | RNVC: 2
006101820008: RNCC: 5 | RNVC: 9

27 Feb 1985

5340-15-107-5342
Retaining Strap

151075342
SR 1869: RNCC: 3 | RNVC: 2

22 Mar 1988

5340-15-168-9573
Coat And Hat Hook

151689573
F72003055: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-179-6953
Angle Bracket

151796953
0000500414932: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-118-3856
Mending Plate

151183856
60164275: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-151-8691
Angle Bracket

151518691
60120169: RNCC: 3 | RNVC: 2

14 Jul 2000

5340-15-120-6651
Rod End Clevis

151206651
D0484094: RNCC: 3 | RNVC: 2

28 Jun 1996

5340-15-007-1901
Retaining Strap

150071901
1384170: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-051-3251
Retaining Strap

150513251
4553835: RNCC: 3 | RNVC: 2
4553835: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-187-6306
Access Cover

151876306
4895358: RNCC: 3 | RNVC: 2

15 Apr 2009

5340-15-118-3383
Angle Bracket

151183383
60147137: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-113-0097
Retaining Strap

151130097
37956626200: RNCC: 3 | RNVC: 2
93155431: RNCC: 5 | RNVC: 2

23 Feb 1989

5340-15-175-1140
Mounting Bracket

151751140
8545566: RNCC: 3 | RNVC: 2
470635SAV: RNCC: 5 | RNVC: 2

29 Dec 2003

5340-15-108-5977
Loop Clamp

151085977
12180090: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-187-5439
Bow Handle

151875439
E5347.0000: RNCC: 3 | RNVC: 2

9 Apr 2009

5340-15-108-4419
Angle Bracket

151084419
323A3006-403: RNCC: 3 | RNVC: 2

19 Jul 1989

5340-15-153-5207
Access Cover

151535207
142041815: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-117-9070
Access Cover

151179070
020.014444: RNCC: 5 | RNVC: 9

28 Jan 1994

5340-15-004-2868
Screw Thread Insert

150042868
04089-101: RNCC: 3 | RNVC: 2

24 Feb 1978

5340-15-119-7148
Angle Bracket

151197148
60173301: RNCC: 3 | RNVC: 2

8 Nov 1994

5340-15-120-4470
Mending Plate

151204470
132521903: RNCC: 3 | RNVC: 2

25 May 1995

5340-15-119-1449
Angle Bracket

151191449
73125808: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-102-8959
Mending Plate

151028959
1P277422: RNCC: 3 | RNVC: 2
1P277422: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-114-6182
Plain Solid Disk

151146182
164822110: RNCC: 3 | RNVC: 2

23 Jun 1992

5340-15-153-7436
Clamping Catch

151537436
142062132: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-201-1760
Mending Plate

152011760
N937G3004201: RNCC: 3 | RNVC: 2
(241)A0126N037G3004201: RNCC: 5 | RNVC: 2

12 Jun 2006

5340-15-007-0178
Angle Bracket

150070178
000201199500: RNCC: 5 | RNVC: 2
000201199500: RNCC: 5 | RNVC: 9

8 Jan 1982

5340-15-103-0014
Rod End Connector

151030014
79003622: RNCC: 3 | RNVC: 2
79003622: RNCC: 5 | RNVC: 2

21 Jun 1987

5340-15-152-7948
Access Cover

151527948
P141202: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-203-7385
Mounting Plate

152037385
504215491: RNCC: 3 | RNVC: 2

27 Jun 2011

5340-15-118-7505
Mounting Bracket

151187505
9433926: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-109-7495
Retaining Strap

151097495
4780612: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-199-4644
Angle Bracket

151994644
A387A1190C: RNCC: 3 | RNVC: 2
(241)A0126A387A1190C: RNCC: 5 | RNVC: 2

12 Apr 2005

5340-15-117-4203
Mending Plate

151174203
142514163: RNCC: 3 | RNVC: 2

4 Oct 1993

5340-15-199-4912
Access Cover

151994912
313059F01: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-15-158-5487
Access Cover

151585487
122511232: RNCC: 3 | RNVC: 2

9 Mar 2004

5340-15-109-2007
Angle Bracket

151092007
60130083: RNCC: 3 | RNVC: 2

23 Feb 1989

5340-15-205-4199
Retaining Strap

152054199
178905204: RNCC: 3 | RNVC: 2
(241)A0199178905204: RNCC: 5 | RNVC: 2

8 Mar 2012

5340-15-148-3556
Angle Bracket

151483556
153758: RNCC: 3 | RNVC: 2
(241)A3963153758: RNCC: 5 | RNVC: 2

29 Jul 1998

5340-15-150-7322
Block Clamp

151507322
52000090: RNCC: 3 | RNVC: 2

20 Dec 1999

5340-15-109-1840
Angle Bracket

151091840
60103990: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-120-0889
Retaining Strap

151200889
60175177: RNCC: 3 | RNVC: 2

19 Dec 1994

5340-15-119-9736
Rod End Connector

151199736
74805F01: RNCC: 3 | RNVC: 2
74805F01: RNCC: 5 | RNVC: 9

22 May 1996

5340-15-116-4761
Butt Hinge Leaf

151164761
60165627: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-119-7169
Angle Bracket

151197169
60173167: RNCC: 3 | RNVC: 2

8 Nov 1994

5340-15-199-4749
Angle Bracket

151994749
1R 606846LA: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-15-009-8068
Rod End Connector

150098068
04960-101: RNCC: 3 | RNVC: 2

9 Feb 1981

5340-15-205-2499
Retaining Strap

152052499
98431478: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-151-6041
Angle Bracket

151516041
42031239: RNCC: 3 | RNVC: 2

19 Jun 2000

5340-15-103-0768
Retaining Band

151030768
DE013.13.252: RNCC: 3 | RNVC: 2
(241)A5015DE013.13.252: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-118-7117
Angle Bracket

151187117
73129957: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-116-4411
Rod End Clevis

151164411
0095420011: RNCC: 3 | RNVC: 2
(241)A26830095420011: RNCC: 5 | RNVC: 2

18 Jul 1994

5340-15-101-1355
Retaining Strap

151011355
129803: RNCC: 3 | RNVC: 2

8 Dec 1983

5340-15-118-7141
Angle Bracket

151187141
37130543: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-154-2510
Protection Bellows

151542510
145503119: RNCC: 1 | RNVC: 2

2 Apr 2001

5340-15-074-3964
Retaining Strap

150743964
26UNI2134CD: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-074-3945
Retaining Strap

150743945
C14UNAV1046A37UN1743CD: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-121-9881
Angle Bracket

151219881
60177319: RNCC: 3 | RNVC: 2

4 Apr 1996

5340-15-117-7052
Retaining Strap

151177052
1P 561631: RNCC: 3 | RNVC: 2
1P 561631: RNCC: 5 | RNVC: 9

10 Jan 1995

5340-15-063-7398
Expansion Plug

150637398
40.04.01.335: RNCC: 3 | RNVC: 2
19.01.63.20: RNCC: 5 | RNVC: 2

30 May 1983

5340-15-155-4533
Retaining Band

151554533
1PA0226C0040G008: RNCC: 3 | RNVC: 2
C0040G008: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-15-202-4540
Tubular Fairlead

152024540
01876: RNCC: 3 | RNVC: 2
(241)A533601876: RNCC: 5 | RNVC: 2

26 Mar 2007

5340-15-103-0713
Angle Bracket

151030713
DE013.13.138: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-199-3165
Bow Handle

151993165
000606232: RNCC: 3 | RNVC: 2
(241)A3343000606232: RNCC: 5 | RNVC: 2

2 Mar 2005

5340-15-102-0350
Mending Plate

151020350
0710U01: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-102-1581
Cushioning Pad

151021581
8211.01.23: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-001-5948
Retaining Strap

150015948
18088992: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-118-4010
Angle Bracket

151184010
60159864: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-120-4520
Access Cover

151204520
142505186: RNCC: 3 | RNVC: 2

25 May 1995

5340-15-128-3701
Handle Grip

151283701
FACEPA81837: RNCC: 3 | RNVC: 2
FACEPA81837: RNCC: 5 | RNVC: 9

9 Oct 1996

5340-15-201-0401
Angle Bracket

152010401
A414A03C214A2: RNCC: 3 | RNVC: 2
(241)A0126A414A03C214A2: RNCC: 5 | RNVC: 2

15 May 2006

5340-15-147-6951
Lever Bracket

151476951
8785.075: RNCC: 3 | RNVC: 2
8785.075: RNCC: 5 | RNVC: 2

3 Mar 1998

5340-15-177-6243
Bow Handle

151776243
TOOOO7POIG: RNCC: 3 | RNVC: 2

4 Jun 2004

5340-15-112-2249
Mending Plate

151122249
21860035A: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-067-4233
Retaining Bail

150674233
064-1P316875: RNCC: 2 | RNVC: 2
064-1P316875: RNCC: 5 | RNVC: 9

11 Feb 1986

5340-15-187-2162
Dashpot

151872162
179201137: RNCC: 3 | RNVC: 2
(241)A0199179201137: RNCC: 5 | RNVC: 2

25 Feb 2009

5340-15-121-5786
Loop Clamp

151215786
1Z 589442: RNCC: 3 | RNVC: 2
1Z 589442: RNCC: 5 | RNVC: 9

18 Sep 1996

5340-15-177-4330
Mounting Bracket

151774330
051113: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-118-3660
Mending Plate

151183660
60141460: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-186-9062
Mounting Plate

151869062
137291: RNCC: 3 | RNVC: 2
0028520: RNCC: 5 | RNVC: 2

5 Jan 2009

5340-15-116-8441
Mending Plate

151168441
D1402612: RNCC: 3 | RNVC: 2

24 Jan 1994

5340-15-193-7304
Retaining Band

151937304
4006209455029: RNCC: 3 | RNVC: 2
(241)A60284006209455029: RNCC: 5 | RNVC: 2

2 Jul 2010

5340-15-107-5724
Angle Bracket

151075724
DE013.14.267: RNCC: 3 | RNVC: 2

5 Jan 1989

5340-15-148-3550
Angle Bracket

151483550
107738: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-187-2010
Mounting Bracket

151872010
SC 100 637: RNCC: 3 | RNVC: 2
(241)A3980SC100637: RNCC: 5 | RNVC: 2

24 Feb 2009

5340-15-202-2582
Loop Clamp

152022582
504096772: RNCC: 3 | RNVC: 2
(241)A4249504096772: RNCC: 5 | RNVC: 2

19 Feb 2007

5340-15-189-2700
Loop Clamp

151892700
500377680: RNCC: 3 | RNVC: 2
B000286: RNCC: 5 | RNVC: 2

10 Feb 2010

5340-15-108-4110
Loop Clamp

151084110
4198223: RNCC: 3 | RNVC: 2

4 Jun 1998

5340-15-100-8280
Retaining Strap

151008280
21610089A: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-179-6830
Mounting Bracket

151796830
0000500413237: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-067-9266
Retaining Strap

150679266
67.36.034.0: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-001-7739
Loop Clamp

150017739
8023543: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-148-1905
Pipe Hanger

151481905
555909015000: RNCC: 3 | RNVC: 2

1 Jul 1998

5340-15-064-9306
Hand Crank

150649306
141596: RNCC: 3 | RNVC: 2

6 Mar 1984

5340-15-004-3720
Mending Plate

150043720
750137E: RNCC: 3 | RNVC: 2

16 Sep 1980

5340-15-103-6583
Rod End Clevis

151036583
24009119A: RNCC: 3 | RNVC: 2

26 Nov 1987

5340-15-151-6698
Angle Bracket

151516698
4716267: RNCC: 3 | RNVC: 2

23 Jun 2000

5340-15-116-6525
Angle Bracket

151166525
344A9043-401: RNCC: 3 | RNVC: 2

9 Jun 1993

5340-15-116-4087
Mending Plate

151164087
145502146: RNCC: 3 | RNVC: 2

18 May 1993

5340-15-118-0879
Rod End Clevis

151180879
D0487605: RNCC: 3 | RNVC: 2

16 Apr 1996

5340-15-119-1204
Mending Plate

151191204
73115807: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-187-0825
Retaining Strap

151870825
06-1058: RNCC: 3 | RNVC: 2
(241)A0199165006166: RNCC: 5 | RNVC: 2
165006166: RNCC: 5 | RNVC: 2

10 Feb 2009

5340-15-153-3916
Mending Plate

151533916
5137-321-09: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-156-9350
Mending Plate

151569350
505330261: RNCC: 3 | RNVC: 2
1PA424942535621: RNCC: 5 | RNVC: 2
42535621: RNCC: 5 | RNVC: 2
505330261: RNCC: 5 | RNVC: 2
505330261: RNCC: 5 | RNVC: 9

13 Mar 2003

5340-15-163-3753
Mounting Plate

151633753
9435749: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-008-0767
Angle Bracket

150080767
60114214: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-148-4192
Block Clamp

151484192
D1404414: RNCC: 3 | RNVC: 2

11 Aug 1998

5340-15-120-3569
Access Cover

151203569
60175231: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-122-0095
Angle Bracket

151220095
60179928: RNCC: 3 | RNVC: 2

10 Apr 1996

5340-15-112-7514
Angle Bracket

151127514
56008506026: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-180-0856
Mounting Plate

151800856
30073177: RNCC: 3 | RNVC: 2

28 Jan 2008

5340-15-064-5877
Bow Handle

150645877
60111517: RNCC: 3 | RNVC: 2

17 Nov 1983

5340-15-005-4571
Handle Grip

150054571
1137-16-902: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-001-7972
Mounting Bracket

150017972
5949784190: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-121-7820
Rod End Clevis

151217820
79100813: RNCC: 3 | RNVC: 2

19 Feb 1996

5340-15-177-3975
Bridge Clamp

151773975
039853: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-103-6605
Loop Clamp

151036605
24009143A: RNCC: 3 | RNVC: 2

26 Nov 1987

5340-15-063-6478
Rod End Clevis

150636478
0.275.F.05: RNCC: 3 | RNVC: 2

9 Mar 1982

5340-15-153-2659
Vent Plug

151532659
56281: RNCC: 2 | RNVC: 3
122612148: RNCC: 5 | RNVC: 3

12 Dec 2000

5340-15-005-4421
Retaining Strap

150054421
1386754: RNCC: 3 | RNVC: 2
1386754: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-179-6713
Threaded Rod End

151796713
98416226: RNCC: 3 | RNVC: 2
(241)A424998416226: RNCC: 5 | RNVC: 2

7 Jun 2007

5340-15-109-8785
Spring Tension Clip

151098785
4699549: RNCC: 3 | RNVC: 2

15 Oct 1988

5340-15-148-3481
Angle Bracket

151483481
102898: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-116-8438
Rod End Clevis

151168438
D1402742: RNCC: 3 | RNVC: 2

24 Jan 1994

5340-15-112-3495
Angle Bracket

151123495
60148537: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-003-4055
Loop Clamp

150034055
SF260-13-97-13: RNCC: 3 | RNVC: 2
(241)A2142SF260-13-97-13: RNCC: 5 | RNVC: 2

7 Nov 2013

5340-15-105-8485
Bow Handle

151058485
1500/IC/III-08.09.58-49: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-003-2419
Corner Brace

150032419
109G5306P02-103: RNCC: 3 | RNVC: 2
(241)A0126109G5306P02-103: RNCC: 5 | RNVC: 2

30 Oct 2013

5340-15-121-6218
Mounting Bracket

151216218
80A057441: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-120-4523
Access Cover

151204523
142505122: RNCC: 3 | RNVC: 2

25 May 1995

5340-15-188-8113
Recess Handle

151888113
42346840: RNCC: 3 | RNVC: 2
(241)AD75142346840: RNCC: 5 | RNVC: 2
42346840: RNCC: 5 | RNVC: 2

19 Nov 2009

5340-15-155-9480
Angle Bracket

151559480
60189053: RNCC: 3 | RNVC: 2

14 Oct 2002

5340-15-068-6620
Angle Bracket

150686620
204-6000-54-5: RNCC: 3 | RNVC: 2

9 Dec 1985

5340-15-121-4910
Expansion Plug

151214910
14328101: RNCC: 3 | RNVC: 2

3 Jan 1996

5340-15-198-4234
Access Cover

151984234
162522105: RNCC: 3 | RNVC: 2

27 Sep 2004

5340-15-065-0909
Rod End Connector

150650909
1255-14-115: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-113-1464
Rod End Clevis

151131464
312A5511-001: RNCC: 3 | RNVC: 2

7 Oct 1990

5340-15-168-9136
Coat And Hat Hook

151689136
F71014316: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-203-0313
Angle Bracket

152030313
1100013: RNCC: 3 | RNVC: 2
(241)A50091100013: RNCC: 5 | RNVC: 2

19 Nov 2007

5340-15-127-7215
Handle Grip

151277215
5425-75: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-117-6446
Mending Plate

151176446
22202204: RNCC: 3 | RNVC: 2

5 Jan 1994

5340-15-052-1213
Loop Clamp

150521213
N0R2-505-06-16B: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-055-9638
Loop Clamp

150559638
10UNI2138A34-2633CDCR: RNCC: 2 | RNVC: 2
2400-32-945: RNCC: 5 | RNVC: 2
240032945: RNCC: 5 | RNVC: 2

26 Jun 1978

5340-15-178-6517
Mounting Plate

151786517
2231.068.0001: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-116-4792
Expansion Plug

151164792
14330101: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-108-4462
Angle Bracket

151084462
345A3254-001: RNCC: 3 | RNVC: 2

19 Jul 1989

5340-15-007-7541
Angle Bracket

150077541
4988012: RNCC: 3 | RNVC: 2

27 Mar 1979

5340-15-177-3941
Access Cover

151773941
037052: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-127-6985
Handle Grip

151276985
5425-88: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-169-3576
Coat And Hat Hook

151693576
F72010980: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-008-1824
Retaining Strap

150081824
60114458: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-160-6204
Coat And Hat Hook

151606204
F720118021: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-114-0178
Access Cover

151140178
000205302650: RNCC: 5 | RNVC: 2
000205302650: RNCC: 5 | RNVC: 9

15 Apr 1992

5340-15-179-7079
Mounting Plate

151797079
00181737: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-000-4336
Retaining Band

150004336
42600482502N: RNCC: 3 | RNVC: 2

1 Mar 2013

5340-15-009-2060
Retaining Strap

150092060
4115591: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-112-2999
Plug Button

151122999
14591987: RNCC: 3 | RNVC: 2

22 Feb 1989

5340-15-108-4111
Retaining Strap

151084111
607942: RNCC: 3 | RNVC: 2

5 Jan 1989

5340-15-179-1842
Access Cover

151791842
70741635: RNCC: 3 | RNVC: 2

13 Jun 2006

5340-15-120-0865
Angle Bracket

151200865
60171908: RNCC: 3 | RNVC: 2

19 Dec 1994

5340-15-105-8978
Spring Tension Clip

151058978
23549: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-001-8367
Bow Handle

150018367
5949789622: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-193-9863
Loop Clamp

151939863
3617.224: RNCC: 3 | RNVC: 2

11 Aug 2010

5340-15-001-0456
Retaining Band

150010456
ECT-F 265/9.0: RNCC: 3 | RNVC: 2
00409409: RNCC: 5 | RNVC: 2

21 May 2013

5340-15-173-6456
Flush Catch

151736456
A185A032A064: RNCC: 3 | RNVC: 2

23 Jun 2003

5340-15-120-4833
Access Cover

151204833
142519110: RNCC: 3 | RNVC: 2

9 Jun 1995

5340-15-145-2719
Mounting Bracket

151452719
109-0720-02-101: RNCC: 3 | RNVC: 2

23 Jun 1997

5340-15-187-9392
Loop Clamp

151879392
M32/50 UNI 9209: RNCC: 3 | RNVC: 2
(241)A0199230026609: RNCC: 5 | RNVC: 2
230026609: RNCC: 5 | RNVC: 2

1 Jun 2009

5340-15-114-1198
Expansion Plug

151141198
200.363.841: RNCC: 3 | RNVC: 2

29 Apr 1992

5340-15-020-1053
Leather Strap

150201053
02-231E10: RNCC: 3 | RNVC: 2

10 Apr 1972

5340-15-205-4191
Retaining Strap

152054191
178904753: RNCC: 3 | RNVC: 2
(241)A0199178904753: RNCC: 5 | RNVC: 2

8 Mar 2012

5340-15-197-8964
Door Handle

151978964
0000500335001: RNCC: 3 | RNVC: 2
(241)A39630000500335001: RNCC: 5 | RNVC: 2

24 May 2004

5340-15-007-7075
Retaining Strap

150077075
4233014: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-005-5100
Retaining Strap

150055100
1383639: RNCC: 3 | RNVC: 2
1383639: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-148-3472
Mending Plate

151483472
102902: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-195-3757
Caster Wheel

151953757
60.67.122.00: RNCC: 3 | RNVC: 2
(241)AJ86060.67.122.00: RNCC: 5 | RNVC: 2

21 Mar 2011

5340-15-118-7559
Rod End Connector

151187559
9435138: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-118-2022
Angle Bracket

151182022
60138241: RNCC: 3 | RNVC: 2

22 Apr 1994

5340-15-207-1035
Access Cover

152071035
552607014000: RNCC: 3 | RNVC: 2
(241)A1140552607014000: RNCC: 5 | RNVC: 2

4 Sep 2012

5340-15-181-0272
Snap Hook

151810272
883: RNCC: 3 | RNVC: 2

29 Sep 2008

5340-15-109-1532
Mending Plate

151091532
100900329750: RNCC: 5 | RNVC: 2
100900329750: RNCC: 5 | RNVC: 9

19 Jul 1989

5340-15-100-8801
Mending Plate

151008801
322104P1: RNCC: 3 | RNVC: 2
322104P1: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-119-0251
Access Cover

151190251
70683277: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-201-4031
Retaining Bail

152014031
00208120: RNCC: 3 | RNVC: 2
(241)A349200208120: RNCC: 5 | RNVC: 2

21 Aug 2006

5340-15-001-7749
Access Cover

150017749
504124620: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-118-8021
Clamping Catch

151188021
4990607: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-118-9153
Access Cover

151189153
73076863: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-147-6335
Screw Thread Insert

151476335
01320030003: RNCC: 3 | RNVC: 2

5 Feb 1998

5340-15-001-8402
Mounting Bracket

150018402
500436796: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-187-6837
Rigid Caster

151876837
KR3203: RNCC: 3 | RNVC: 2

27 Apr 2009

5340-15-118-8621
Access Cover

151188621
299709590H: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-121-9883
Angle Bracket

151219883
60146218: RNCC: 3 | RNVC: 2

4 Apr 1996

5340-15-163-3809
Mounting Plate

151633809
9449742: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-004-3744
Rod End Clevis

150043744
7-40523-101-72372A1: RNCC: 3 | RNVC: 2

23 Jun 1978

5340-15-118-7046
Mending Plate

151187046
73131025: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-116-4910
Retaining Strap

151164910
60150590: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-062-5185
Angle Bracket

150625185
P-190027-001: RNCC: 3 | RNVC: 2
P190027-001: RNCC: 5 | RNVC: 2

11 Jun 1981

5340-15-169-2478
Coat And Hat Hook

151692478
F72009835: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-004-7625
Retaining Strap

150047625
68160-101: RNCC: 3 | RNVC: 2

10 Apr 1978

5340-15-178-0669
Clamping Catch

151780669
312F: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-15-178-9479
Mounting Plate

151789479
AG018MD008AA00: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-15-148-3473
Mending Plate

151483473
102901: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-145-9328
Coat And Hat Hook

151459328
653015C000008: RNCC: 3 | RNVC: 2

11 Jul 1997

5340-15-005-5115
Access Door Hinge

150055115
1378767: RNCC: 3 | RNVC: 2
1378767: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-149-2925
Retaining Strap

151492925
4882228: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-178-7336
Mounting Plate

151787336
029462: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-118-4551
Retaining Strap

151184551
60152685: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-119-5575
Mending Plate

151195575
4881560: RNCC: 3 | RNVC: 2

19 Sep 1994

5340-15-108-4746
Bow Handle

151084746
S30N10: RNCC: 3 | RNVC: 2
N7697393010: RNCC: 5 | RNVC: 2

19 Jul 1989

5340-15-150-6019
Angle Bracket

151506019
105942: RNCC: 3 | RNVC: 2

6 Dec 1999

5340-15-005-5090
Hand Crank

150055090
K725653: RNCC: 3 | RNVC: 2
K725653: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-116-4756
Butt Hinge Leaf

151164756
60165035: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-121-7017
Angle Bracket

151217017
73130543: RNCC: 3 | RNVC: 2

6 Feb 1996

Load More Results