What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 14 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 14 of 72

5340-15-164-3231
Angle Bracket

151643231
98465148: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-119-1879
Access Cover

151191879
75214922: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-109-7152
Expansion Plug

151097152
10158350: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-109-0071
Butt Hinge Leaf

151090071
1393199: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-109-4861
Angle Bracket

151094861
1Z 589419: RNCC: 3 | RNVC: 2
1Z 589419: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-152-7945
Mounting Bracket

151527945
P141101: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-151-7303
Loop Clamp

151517303
0-180767: RNCC: 3 | RNVC: 2

4 Jul 2000

5340-15-118-3655
Mending Plate

151183655
60142389: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-107-5139
Retaining Strap

151075139
7301026: RNCC: 3 | RNVC: 2
(7001)5340151075139: RNCC: 5 | RNVC: 2

30 Mar 1988

5340-15-063-3741
Retaining Strap

150633741
60113254: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-120-4463
Mending Plate

151204463
132508137: RNCC: 3 | RNVC: 2

25 May 1995

5340-15-104-4377
Expansion Plug

151044377
10158811: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-205-0001
Retaining Band

152050001
504038314: RNCC: 3 | RNVC: 2
(241)A4249504038314: RNCC: 5 | RNVC: 2

8 Feb 2012

5340-15-148-6560
Angle Bracket

151486560
190525172: RNCC: 3 | RNVC: 2

17 Sep 1998

5340-15-158-0479
Access Cover

151580479
T0004853: RNCC: 3 | RNVC: 2

15 Dec 2003

5340-15-008-3331
Retaining Strap

150083331
4058377: RNCC: 3 | RNVC: 2

12 Oct 1980

5340-15-160-4172
Coat And Hat Hook

151604172
F720046341: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-059-7403
Screw Thread Insert

150597403
1182-20312: RNCC: 3 | RNVC: 2

5 Feb 1976

5340-15-147-4161
Mending Plate

151474161
3210004900: RNCC: 3 | RNVC: 2

18 Nov 1997

5340-15-203-9562
Plain Solid Disk

152039562
56698003A7: RNCC: 3 | RNVC: 2
(241)A486756698003A7: RNCC: 5 | RNVC: 2

29 Jul 2011

5340-15-204-8308
Retaining Band

152048308
839.42100 NY 2,5X100: RNCC: 3 | RNVC: 2
(241)AK062839.42100NY2,5X100: RNCC: 5 | RNVC: 2

13 Jan 2012

5340-15-151-2761
Stand Base

151512761
541012720: RNCC: 3 | RNVC: 2
554101272000: RNCC: 5 | RNVC: 2

8 Jun 2000

5340-15-162-2101
Mounting Bracket

151622101
015.016: RNCC: 3 | RNVC: 2

17 May 2001

5340-15-002-5491
Strapping

150025491
504182836: RNCC: 3 | RNVC: 2

3 Sep 2013

5340-15-149-7775
Bow Handle

151497775
9909: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-15-007-1880
Retaining Strap

150071880
1373807: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-150-8895
Mounting Bracket

151508895
00011633: RNCC: 3 | RNVC: 2

3 Feb 2000

5340-15-073-8903
Flush Lock

150738903
13A65X35-3LEVE: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-150-0878
Loop Clamp

151500878
016010026: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-195-8132
Mounting Bracket

151958132
380049: RNCC: 3 | RNVC: 2
(241)AJ611380049: RNCC: 5 | RNVC: 2

16 May 2011

5340-15-122-2904
Mounting Plate

151222904
800074149: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-178-7632
Mounting Bracket

151787632
040130: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-194-7889
Caster Wheel

151947889
51894: RNCC: 3 | RNVC: 2
(241)A348851894: RNCC: 5 | RNVC: 2

14 Jan 2011

5340-15-163-3633
Bridge Clamp

151633633
4806613: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-109-7468
Retaining Strap

151097468
60125341: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-150-0977
Flush Lock

151500977
083030099: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-119-9250
Loop Clamp

151199250
69F004P008: RNCC: 3 | RNVC: 2
69F004P008: RNCC: 3 | RNVC: 2

21 Nov 1994

5340-15-073-5219
Rim Lock

150735219
1756PART28: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-105-8381
Retaining Band

151058381
2.6859.029.2: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-118-8557
Mounting Bracket

151188557
201302242D: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-118-9198
Access Cover

151189198
73147809: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-138-4912
Angle Bracket

151384912
5988908: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-138-4910
Angle Bracket

151384910
5988489: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-060-2704
Hand Crank

150602704
2-02284: RNCC: 3 | RNVC: 2

9 Feb 1977

5340-15-121-3701
Mounting Plate

151213701
145380-1: RNCC: 3 | RNVC: 2

4 Dec 1995

5340-15-120-4582
Mounting Bracket

151204582
A145367-1: RNCC: 3 | RNVC: 2

29 May 1995

5340-15-181-3680
Metal Grille

151813680
2C1144IS0016: RNCC: 3 | RNVC: 2
(241)A29802C1144IS0016: RNCC: 5 | RNVC: 2

10 Dec 2008

5340-15-007-2229
Retaining Strap

150072229
1398416: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-231-9246
Angle Bracket

152319246
2992524: RNCC: 3 | RNVC: 2
291015E127227: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-062-0826
Retaining Strap

150620826
L1002B19: RNCC: 5 | RNVC: 2
L1002B19: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-118-3455
Spring Tension Clip

151183455
60143825: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-180-5411
Mounting Plate

151805411
06.PT3102.422: RNCC: 3 | RNVC: 2

16 Jun 2008

5340-15-120-3551
Angle Bracket

151203551
60174800: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-120-1392
Retaining Strap

151201392
D0490086: RNCC: 3 | RNVC: 2
490086: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-15-152-4853
Access Cover

151524853
60128502: RNCC: 3 | RNVC: 2

19 Sep 2000

5340-15-001-7982
Mounting Bracket

150017982
5949789946: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-001-7859
Mounting Bracket

150017859
5949785754: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-113-1819
Angle Bracket

151131819
0-109760: RNCC: 3 | RNVC: 2

16 Dec 1990

5340-15-054-8831
Retaining Strap

150548831
P20EI20: RNCC: 5 | RNVC: 2
P20EI20: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-104-4368
Expansion Plug

151044368
0-48629: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-198-4264
Access Cover

151984264
162520239: RNCC: 3 | RNVC: 2

27 Sep 2004

5340-15-064-7649
Loop Clamp

150647649
19.71.80.00: RNCC: 3 | RNVC: 2

16 Dec 1983

5340-15-158-6079
Strap Hinge

151586079
122644952: RNCC: 3 | RNVC: 2

10 Mar 2004

5340-15-153-9991
Access Cover

151539991
02730A112810: RNCC: 5 | RNVC: 2
T0064375: RNCC: 5 | RNVC: 2
02730A112810: RNCC: 5 | RNVC: 9

15 Mar 2001

5340-15-162-6384
Mounting Plate

151626384
595358: RNCC: 3 | RNVC: 2

7 Dec 2001

5340-15-119-5639
Clamping Catch

151195639
0M06538000: RNCC: 3 | RNVC: 2
OM06538000: RNCC: 3 | RNVC: 2
60144137: RNCC: 5 | RNVC: 2

19 Sep 1994

5340-15-116-9067
Plain Solid Disk

151169067
DPR23780/3-32: RNCC: 3 | RNVC: 2

29 Nov 1993

5340-15-122-2136
Loop Clamp

151222136
800050445: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-177-3763
Mounting Bracket

151773763
028221: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-186-9154
Loop Clamp

151869154
375181: RNCC: 3 | RNVC: 2
375181: RNCC: 5 | RNVC: 9

5 Jan 2009

5340-15-178-4009
Mounting Plate

151784009
155094-1: RNCC: 3 | RNVC: 2

31 May 2005

5340-15-063-0044
Strap Hinge

150630044
5946320: RNCC: 3 | RNVC: 2

3 Jun 1982

5340-15-001-8255
Mounting Bracket

150018255
5949783995: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-119-4668
Plain Solid Disk

151194668
DPR19610-6: RNCC: 3 | RNVC: 2

4 Aug 1994

5340-15-063-2658
Angle Bracket

150632658
42002168: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-210-0063
Angle Bracket

152100063
EX7125RI2015270: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-203-7232
Access Cover

152037232
00234R0440: RNCC: 3 | RNVC: 2
00234R0440: RNCC: 5 | RNVC: 2
CV173765: RNCC: 5 | RNVC: 2

27 Jun 2011

5340-15-116-4988
Support Hook

151164988
60150589: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-201-3165
Mounting Plate

152013165
AA020505000: RNCC: 3 | RNVC: 2
AA02050500000: RNCC: 3 | RNVC: 2
(241)A0912AA020505000: RNCC: 5 | RNVC: 2
(241)A0912AA02050500000: RNCC: 5 | RNVC: 2

25 Jul 2006

5340-15-187-9512
Access Cover

151879512
20.00.33.10: RNCC: 3 | RNVC: 2

3 Jun 2009

5340-15-001-5846
Retaining Bail

150015846
42566679: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-195-2196
Access Cover

151952196
219930513: RNCC: 3 | RNVC: 2
219930513: RNCC: 5 | RNVC: 2
CV173697: RNCC: 5 | RNVC: 2

7 Mar 2011

5340-15-114-7911
Butt Hinge

151147911
8820.00.07: RNCC: 3 | RNVC: 2

12 May 1993

5340-15-157-4765
Bow Handle

151574765
(241)S346520000-424: RNCC: 3 | RNVC: 2
2 0000-424: RNCC: 3 | RNVC: 2

7 Aug 2003

5340-15-005-6707
Screw Thread Insert

150056707
13628-101A1: RNCC: 3 | RNVC: 2
13628-101A1: RNCC: 5 | RNVC: 9

20 Jun 1979

5340-15-193-8668
Expansion Plug

151938668
42N-60-11423: RNCC: 3 | RNVC: 2
(241)AH72442N-60-11423: RNCC: 5 | RNVC: 2

21 Jul 2010

5340-15-006-1223
Angle Bracket

150061223
4988011: RNCC: 3 | RNVC: 2

27 Mar 1979

5340-15-118-3624
Angle Bracket

151183624
60140992: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-203-0376
Retaining Band

152030376
033090082: RNCC: 3 | RNVC: 2
(241)A5009033090082: RNCC: 5 | RNVC: 2

19 Nov 2007

5340-15-200-2959
Access Cover

152002959
02700A203660: RNCC: 3 | RNVC: 2

29 Nov 2005

5340-15-062-7939
Retaining Strap

150627939
0-34190: RNCC: 3 | RNVC: 2

28 Aug 1982

5340-15-062-3696
Angle Bracket

150623696
012132 D: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-178-1044
Strap Hinge Leaf

151781044
A.7830: RNCC: 3 | RNVC: 2

14 Feb 2005

5340-15-180-7077
Mounting Bracket

151807077
7-6531.008: RNCC: 3 | RNVC: 2
76531008: RNCC: 5 | RNVC: 2
CV146508: RNCC: 5 | RNVC: 2

7 Jul 2008

5340-15-118-2493
Mounting Bracket

151182493
G99-B: RNCC: 3 | RNVC: 2

17 Oct 1994

5340-15-102-8747
Spring Holder

151028747
1P209931: RNCC: 3 | RNVC: 2
1P209931: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-119-4856
Retaining Strap

151194856
73134510: RNCC: 3 | RNVC: 2

18 Aug 1994

5340-15-207-5621
Access Cover

152075621
109-0342-32-155: RNCC: 3 | RNVC: 2

29 Oct 2012

5340-15-003-4053
Loop Clamp

150034053
S208-26-304-01: RNCC: 3 | RNVC: 2
(241)A2142S208-26-304-01: RNCC: 5 | RNVC: 2

7 Nov 2013

5340-15-158-5873
Threaded Rod End

151585873
122611606: RNCC: 3 | RNVC: 2

9 Mar 2004

5340-15-155-3048
Angle Bracket

151553048
60185883: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-15-008-1820
Angle Bracket

150081820
60114341: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-007-2637
Retaining Strap

150072637
1390499: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-156-1503
Mending Plate

151561503
991241069: RNCC: 3 | RNVC: 2
42536453: RNCC: 5 | RNVC: 2

6 Dec 2002

5340-15-116-4815
Angle Bracket

151164815
60150597: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-118-3380
Angle Bracket

151183380
60143610: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-118-2038
Screw Thread Insert

151182038
13526070: RNCC: 3 | RNVC: 2

22 Apr 1994

5340-15-188-8023
Swivel Caster

151888023
21327FR: RNCC: 3 | RNVC: 2

19 Nov 2009

5340-15-008-0765
Angle Bracket

150080765
60114210: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-177-5484
Fusible Plug

151775484
114179: RNCC: 3 | RNVC: 2
(241)A4042114179: RNCC: 5 | RNVC: 2
114179: RNCC: 5 | RNVC: 2

22 Apr 2004

5340-15-147-8898
Pipe Hanger

151478898
ZIM20: RNCC: 3 | RNVC: 2
CAE00459: RNCC: 5 | RNVC: 2

18 May 1998

5340-15-103-6216
Angle Bracket

151036216
20542060A: RNCC: 3 | RNVC: 2

26 Nov 1987

5340-15-001-7970
Mounting Bracket

150017970
5949784970: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-122-3561
Roller Holder

151223561
D1411906: RNCC: 3 | RNVC: 2

8 Jun 2000

5340-15-001-3600
Corner Brace

150013600
129-0371-02-159: RNCC: 3 | RNVC: 2

24 Jun 2013

5340-15-156-1502
Mending Plate

151561502
991241068: RNCC: 3 | RNVC: 2
42536452: RNCC: 5 | RNVC: 2

6 Dec 2002

5340-15-001-4340
Mounting Bracket

150014340
500436988: RNCC: 3 | RNVC: 2

2 Jul 2013

5340-15-151-7255
Webbing Strap

151517255
0-178490: RNCC: 3 | RNVC: 2

4 Jul 2000

5340-15-206-9944
Plug Button

152069944
091452: RNCC: 3 | RNVC: 2
(241)A3593091452: RNCC: 5 | RNVC: 2

6 Aug 2012

5340-15-120-4465
Mending Plate

151204465
132511172: RNCC: 3 | RNVC: 2

25 May 1995

5340-15-118-4014
Angle Bracket

151184014
60159112: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-118-9183
Mounting Bracket

151189183
73146731: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-120-4597
Bail Handle

151204597
140-0584/11: RNCC: 3 | RNVC: 2

2 Jun 1995

5340-15-005-0927
Rod End Clevis

150050927
66450-101A1: RNCC: 3 | RNVC: 2

25 Oct 1978

5340-15-110-2212
Retaining Strap

151102212
09412-001A00: RNCC: 3 | RNVC: 2
09412-001: RNCC: 5 | RNVC: 2

27 Jun 1990

5340-15-102-0791
Butt Hinge Leaf

151020791
213A7055-001: RNCC: 3 | RNVC: 2

29 Jul 1988

5340-15-189-1953
Control Cam

151891953
DAC73A0005-01: RNCC: 3 | RNVC: 2
(241)A2142DAC73A0005-01: RNCC: 5 | RNVC: 2

4 Feb 2010

5340-15-118-8614
Access Cover

151188614
299709299R: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-063-3212
Retaining Strap

150633212
60104982: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-109-7223
Angle Bracket

151097223
60140858: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-199-7937
Access Cover

151997937
0111165: RNCC: 3 | RNVC: 2
D21/03: RNCC: 5 | RNVC: 2

30 May 2005

5340-15-177-3398
Loop Clamp

151773398
8014389: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-198-5543
Loop Clamp

151985543
J1220G08: RNCC: 3 | RNVC: 2
(241)A3460J1220G08: RNCC: 5 | RNVC: 2

13 Oct 2004

5340-15-122-0572
Mounting Bracket

151220572
28009-65: RNCC: 3 | RNVC: 2
28009-65: RNCC: 5 | RNVC: 9

23 Apr 1996

5340-15-002-1571
Headed Shoulder Pin

150021571
99R01132108O: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-163-4047
Mounting Bracket

151634047
98467028: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-206-8205
Mounting Bracket

152068205
ED0058301610-S: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-064-2041
Screw Thread Insert

150642041
590-962-305: RNCC: 3 | RNVC: 2
590.962.305: RNCC: 5 | RNVC: 2
590.962.305: RNCC: 5 | RNVC: 2

6 Dec 1983

5340-15-118-9117
Rod End Clevis

151189117
70638316: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-109-0841
Angle Bracket

151090841
60103084: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-116-4794
Expansion Plug

151164794
60166180: RNCC: 3 | RNVC: 2
(241)AF90860166180: RNCC: 5 | RNVC: 2
60166180: RNCC: 5 | RNVC: 2

20 May 1993

5340-15-118-8603
Access Cover

151188603
299707196Q: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-153-5208
Access Cover

151535208
142041816: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-062-4496
Retaining Strap

150624496
5930528: RNCC: 3 | RNVC: 2
5930528: RNCC: 5 | RNVC: 9

29 Sep 1980

5340-15-148-9235
Angle Bracket

151489235
60186062: RNCC: 3 | RNVC: 2

2 Nov 1998

5340-15-155-7784
Clamping Catch

151557784
723009143600: RNCC: 1 | RNVC: 2
18-613SS: RNCC: 1 | RNVC: 2

25 Jun 2002

5340-15-203-9988
Access Cover

152039988
C62343: RNCC: 3 | RNVC: 2
(241)A0178C62343: RNCC: 5 | RNVC: 2

2 Aug 2011

5340-15-187-2098
Retaining Band

151872098
MFG50: RNCC: 3 | RNVC: 2
(241)A3980MFG50: RNCC: 5 | RNVC: 2

24 Feb 2009

5340-15-064-4168
Angle Bracket

150644168
SA 8943: RNCC: 3 | RNVC: 2

30 Jan 1984

5340-15-123-1856
Angle Bracket

151231856
4699632: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-193-1960
Clamping Catch

151931960
14875: RNCC: 3 | RNVC: 2

20 Apr 2010

5340-15-108-4112
Retaining Strap

151084112
4002890: RNCC: 3 | RNVC: 2

5 Jan 1989

5340-15-145-0194
Screw Thread Insert

151450194
01300050075: RNCC: 3 | RNVC: 2
215606320: RNCC: 5 | RNVC: 2

12 May 1997

5340-15-003-8970
Mounting Plate

150038970
182741071: RNCC: 3 | RNVC: 2
(241)A0199182741071: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-193-6083
Expansion Shield

151936083
21737: RNCC: 3 | RNVC: 2
(241)AJ37821737: RNCC: 5 | RNVC: 2

21 Jun 2010

5340-15-129-0264
Angle Bracket

151290264
4043480: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-144-9546
Tubular Fairlead

151449546
17335780: RNCC: 3 | RNVC: 2
(241)A424917335780: RNCC: 5 | RNVC: 2

24 Feb 1997

5340-15-122-3937
Rod End Clevis

151223937
D1405350: RNCC: 3 | RNVC: 2

20 Jun 2000

5340-15-199-5002
Access Cover

151995002
1Q 610615: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-15-161-1057
Coat And Hat Hook

151611057
F720186691: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-059-3593
Retaining Strap

150593593
1127-32-255: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-002-6065
Mounting Plate

150026065
1127-05-548: RNCC: 3 | RNVC: 2

5 Sep 2013

5340-15-162-0490
Mounting Bracket

151620490
73115801: RNCC: 3 | RNVC: 2

5 Dec 2000

5340-15-118-3381
Angle Bracket

151183381
60143608: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-111-9255
Angle Bracket

151119255
897668: RNCC: 3 | RNVC: 2

10 Sep 1989

5340-15-158-6482
Screw Thread Insert

151586482
61240-03/007: RNCC: 3 | RNVC: 2

12 Mar 2004

5340-15-065-4248
Retaining Strap

150654248
5989468: RNCC: 3 | RNVC: 2
5989468: RNCC: 5 | RNVC: 9

24 Oct 1983

5340-15-002-1348
Flush Catch Claw

150021348
5801521141: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-153-5256
Filler Opening Cap

151535256
ICF 14: RNCC: 3 | RNVC: 2
442000000/72/03: RNCC: 5 | RNVC: 2

7 Feb 2001

5340-15-102-1035
Hand Crank

151021035
193-0487/13: RNCC: 3 | RNVC: 2

22 Jun 1986

5340-15-205-7909
Blank Panel

152057909
182742109: RNCC: 3 | RNVC: 2
(241)A0199182742109: RNCC: 5 | RNVC: 2

4 Apr 2012

5340-15-108-7075
Retaining Band

151087075
14568480: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-115-3572
Screw Thread Insert

151153572
1108.20808: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-108-6272
Retaining Strap

151086272
93918543: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-002-3061
Access Door Hinge

150023061
504372682: RNCC: 3 | RNVC: 2

5 Aug 2013

5340-15-113-1473
Butt Hinge

151131473
311A2934-002: RNCC: 3 | RNVC: 2

7 Oct 1990

5340-15-194-2758
Mounting Bracket

151942758
109-0326-47-107: RNCC: 3 | RNVC: 2

26 Oct 2010

5340-15-202-4323
Blank Panel

152024323
999-0500-85-35: RNCC: 3 | RNVC: 2
(241)A0126999-0500-85-35: RNCC: 5 | RNVC: 2

20 Mar 2007

5340-15-121-8254
Spring Tension Clip

151218254
17722174: RNCC: 3 | RNVC: 2
17722174: RNCC: 4 | RNVC: 1
1PA39630-114279: RNCC: 5 | RNVC: 2

5 Mar 1996

5340-15-116-4759
Butt Hinge Leaf

151164759
60165041: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-106-9671
Angle Bracket

151069671
4552408: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-053-0662
Screw Thread Insert

150530662
26T038P037: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-179-8933
Access Cover

151798933
D1307207: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-153-2549
Rod End Clevis

151532549
122605409: RNCC: 3 | RNVC: 2

12 Dec 2000

5340-15-117-8477
Access Cover

151178477
4091496: RNCC: 3 | RNVC: 2

28 Jan 1994

5340-15-189-2714
Access Cover

151892714
504087608: RNCC: 3 | RNVC: 2
B000211: RNCC: 5 | RNVC: 2

10 Feb 2010

5340-15-107-2183
Angle Bracket

151072183
301364G2: RNCC: 3 | RNVC: 2

27 Oct 1988

5340-15-004-4556
Retaining Strap

150044556
62705-101: RNCC: 3 | RNVC: 2

8 May 1978

5340-15-100-5569
Rod End Clevis

151005569
L520-12-06: RNCC: 3 | RNVC: 2

10 Apr 1987

5340-15-107-1157
Spring Holder

151071157
301-01-8550: RNCC: 3 | RNVC: 2

14 Apr 1987

5340-15-204-7557
Block Clamp

152047557
109-0519-24-103: RNCC: 3 | RNVC: 2

22 Dec 2011

5340-15-115-7435
Angle Bracket

151157435
271004/24: RNCC: 3 | RNVC: 2

2 Sep 1993

5340-15-188-9148
Retaining Bail

151889148
828/00361: RNCC: 3 | RNVC: 2
(241)A6479828/00361: RNCC: 5 | RNVC: 2

15 Dec 2009

5340-15-180-5122
Padlock

151805122
195597340: RNCC: 3 | RNVC: 2
(241)A0199195597340: RNCC: 5 | RNVC: 2

10 Jun 2008

5340-15-131-1953
Angle Bracket

151311953
712612: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-062-7910
Angle Bracket

150627910
0-34160: RNCC: 3 | RNVC: 2

28 Aug 1982

5340-15-177-3379
Mounting Bracket

151773379
4751103: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-152-8044
Mounting Bracket

151528044
P420222: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-108-7597
Retaining Strap

151087597
8586089: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-156-4069
Loop Clamp

151564069
142068209: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-147-5668
Mounting Bracket

151475668
5060.008: RNCC: 3 | RNVC: 2

30 Dec 1997

5340-15-179-8772
Mounting Bracket

151798772
C7258W27B1.01: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-063-7382
Loop Clamp

150637382
40.70.01.306: RNCC: 3 | RNVC: 2
12.54.82.01: RNCC: 5 | RNVC: 2

10 May 1983

5340-15-063-3479
Plug Button

150633479
60111744: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-000-4784
Retaining Bail

150004784
45481861: RNCC: 3 | RNVC: 2
45481861: RNCC: 5 | RNVC: 2

11 Mar 2013

5340-15-115-4881
Handle Grip

151154881
SF260-12-105-11: RNCC: 3 | RNVC: 2
SF260-12-105-11: RNCC: 5 | RNVC: 9

29 Nov 1992

5340-15-120-8313
Rod End Clevis

151208313
129-0605-12-103: RNCC: 3 | RNVC: 2

25 Aug 1995

5340-15-073-5243
Flush Lock

150735243
13A65X40-1LEVA: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-063-3353
Recess Handle

150633353
60107962: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-001-8241
Mounting Bracket

150018241
5949789337: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-179-7958
Mounting Bracket

151797958
D1404684: RNCC: 3 | RNVC: 2

3 Aug 2007

5340-15-001-7888
Mounting Bracket

150017888
500416528: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-154-3804
Loop Clamp

151543804
EN4113V09NH: RNCC: 2 | RNVC: 2

14 May 2001

5340-15-153-6871
Loop Clamp

151536871
142068019: RNCC: 3 | RNVC: 2

20 Feb 2001

5340-15-205-3690
Bow Handle

152053690
WQP012500123: RNCC: 3 | RNVC: 2
(241)A2309WQP012500123: RNCC: 5 | RNVC: 2

5 Mar 2012

5340-15-120-3526
Mending Plate

151203526
60175981: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-108-5214
Butt Hinge Leaf

151085214
60126441: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-067-4370
Lock-Release Lever

150674370
046-1Q236075: RNCC: 2 | RNVC: 2
046-1Q236075: RNCC: 5 | RNVC: 9

11 Feb 1986

5340-15-074-3960
Retaining Strap

150743960
18UNI2134CD: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-061-4685
Clip Retainer Plate

150614685
P-135148-001: RNCC: 3 | RNVC: 2
P135148-001: RNCC: 5 | RNVC: 2

30 Jan 1978

5340-15-002-7843
Loop Clamp

150027843
C482: RNCC: 3 | RNVC: 2

2 Oct 2013

5340-15-109-6015
Mending Plate

151096015
60134396: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-050-8319
Leather Strap

150508319
024058: RNCC: 3 | RNVC: 2
024058: RNCC: 5 | RNVC: 9
024058: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-103-6290
Expansion Plug

151036290
21770072B: RNCC: 3 | RNVC: 2

26 Nov 1987

5340-15-003-9123
Mounting Plate

150039123
182741327: RNCC: 3 | RNVC: 2
(241)A0199182741327: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-152-6343
Stand Base

151526343
9462001010: RNCC: 3 | RNVC: 2

4 Oct 2000

5340-15-063-5075
Retaining Strap

150635075
60109470: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-114-9817
Armature Support

151149817
5088892: RNCC: 3 | RNVC: 2
5088892: RNCC: 5 | RNVC: 9

28 May 1993

5340-15-199-9098
Mounting Bracket

151999098
MB_M930: RNCC: 3 | RNVC: 2

25 Jul 2005

5340-15-193-0240
Retaining Clip

151930240
1685660A: RNCC: 3 | RNVC: 2
(241)A42491685660A: RNCC: 5 | RNVC: 2

6 Apr 2010

5340-15-064-5892
Loop Clamp

150645892
4659222: RNCC: 3 | RNVC: 2

17 Nov 1983

5340-15-109-7242
Angle Bracket

151097242
60137257: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-005-0437
Retaining Strap

150050437
0-33506: RNCC: 3 | RNVC: 2

7 Sep 1978

5340-15-148-3474
Mending Plate

151483474
102884: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-120-3545
Angle Bracket

151203545
60175327: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-117-6859
Retaining Strap

151176859
132505156: RNCC: 3 | RNVC: 2

12 Jan 1994

5340-15-121-9090
Retaining Bail

151219090
206780: RNCC: 3 | RNVC: 2
206780: RNCC: 3 | RNVC: 2
206780: RNCC: 5 | RNVC: 9

10 Jul 1996

5340-15-118-4038
Angle Bracket

151184038
60164580: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-205-2696
Access Cover

152052696
2003015432: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-004-7672
Retaining Strap

150047672
68159-101: RNCC: 3 | RNVC: 2

10 Apr 1978

5340-15-059-7124
Angle Bracket

150597124
132-0097-11: RNCC: 3 | RNVC: 2

10 Apr 1975

5340-15-060-6049
Mending Plate

150606049
27175-101: RNCC: 3 | RNVC: 2

7 Jun 1977

5340-15-164-2524
Handle Grip

151642524
4741738: RNCC: 3 | RNVC: 2
4741738: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-131-7580
Retaining Band

151317580
M2182: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-111-8418
Screw Thread Insert

151118418
4698628: RNCC: 3 | RNVC: 2
4698628: RNCC: 5 | RNVC: 2

14 Jun 1988

5340-15-202-2650
Loop Clamp

152022650
2521411: RNCC: 3 | RNVC: 2
(241)A42492521411: RNCC: 5 | RNVC: 2

19 Feb 2007

5340-15-152-7931
Mounting Bracket

151527931
P140802: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-065-7103
Angle Bracket

150657103
109-0851-78-165: RNCC: 3 | RNVC: 2

26 Jun 1985

5340-15-179-6486
Angle Bracket

151796486
J53350610-003: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-059-3450
Retaining Strap

150593450
1127-32-273: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-061-5004
Sliding Door Track

150615004
000200209500: RNCC: 5 | RNVC: 2
000200209500: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-132-5766
Handle Grip

151325766
FGMCRT14TZ3: RNCC: 3 | RNVC: 2
FGMCRT14TZ3: RNCC: 5 | RNVC: 2
FGMCRT14TZ3: RNCC: 5 | RNVC: 9

9 Oct 1996

5340-15-202-8787
Loop Clamp

152028787
18088293: RNCC: 3 | RNVC: 2

6 Sep 2007

5340-15-178-7643
Mounting Bracket

151787643
028477: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-187-1468
Mounting Bracket

151871468
A73639-01-20: RNCC: 3 | RNVC: 2
0172192000: RNCC: 5 | RNVC: 2

19 Feb 2009

5340-15-063-2740
Loop Clamp

150632740
60107851: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-109-0845
Angle Bracket

151090845
60103080: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-058-9737
Handle Grip

150589737
1127-42-847: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-108-7227
Retaining Strap

151087227
8795040: RNCC: 3 | RNVC: 2
(241)A42498795040: RNCC: 5 | RNVC: 2

30 Mar 1988

5340-15-007-3172
Access Cover

150073172
7984210: RNCC: 3 | RNVC: 2

7 Jan 2014

5340-15-186-7734
Retaining Strap

151867734
0000504126817: RNCC: 3 | RNVC: 2
504126817: RNCC: 3 | RNVC: 2

5 Jan 2009

5340-15-180-8247
Filler Opening Cap

151808247
457-1900: RNCC: 3 | RNVC: 2
109-0610-18-107: RNCC: 3 | RNVC: 2
(241)A0126109-0610-18-107: RNCC: 5 | RNVC: 2

24 Jul 2008

5340-15-196-7063
Coat And Hat Hook

151967063
PN UAS 00007012: RNCC: 3 | RNVC: 2
4510F76024239: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-112-3427
Bow Handle

151123427
60149252: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-120-4462
Mending Plate

151204462
132506964: RNCC: 3 | RNVC: 2

25 May 1995

5340-15-117-0845
Retaining Strap

151170845
4613353: RNCC: 3 | RNVC: 2

1 Apr 1998

5340-15-203-8447
Retaining Band

152038447
FASCE0021: RNCC: 3 | RNVC: 2
(241)A4114FASCE0021: RNCC: 5 | RNVC: 2

7 Jul 2011

5340-15-005-2608
Retaining Clip

150052608
109-0710-35-3: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-062-5287
Mending Plate

150625287
1213-25-131: RNCC: 3 | RNVC: 2

2 Dec 1981

5340-15-063-0604
Mending Plate

150630604
0-100341: RNCC: 3 | RNVC: 2

30 Apr 1982

5340-15-063-3196
Angle Bracket

150633196
60104865: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-003-3539
Retaining Clip

150033539
42560691: RNCC: 3 | RNVC: 2

4 Nov 2013

5340-15-009-6740
Angle Bracket

150096740
159277G1: RNCC: 3 | RNVC: 2

17 Oct 1980

5340-15-110-5827
Mending Plate

151105827
4881305: RNCC: 3 | RNVC: 2

18 Apr 1990

5340-15-004-3915
Angle Bracket

150043915
P-110266-001: RNCC: 3 | RNVC: 2
P110266-001: RNCC: 5 | RNVC: 2

27 Jun 1979

5340-15-151-9414
Angle Bracket

151519414
0-174060: RNCC: 3 | RNVC: 2

26 Jul 2000

5340-15-102-1195
Clip Retainer Plate

151021195
V44/1-03-212: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-119-1494
Access Cover

151191494
73126181: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-068-6356
Handle Grip

150686356
197944: RNCC: 3 | RNVC: 2

26 May 1986

5340-15-068-4705
Hand Crank

150684705
W012146: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-178-3305
Access Cover

151783305
109-0731-41-113: RNCC: 3 | RNVC: 2

29 Apr 2005

5340-15-054-8176
Rod End Clevis

150548176
AF106-05A81: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-006-4091
Angle Bracket

150064091
448559: RNCC: 3 | RNVC: 2
448559: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-053-0667
Screw Thread Insert

150530667
26T038P019: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-107-5147
Expansion Plug

151075147
4766863: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-003-6432
Strap Hinge

150036432
B 039: RNCC: 3 | RNVC: 2

18 May 1984

5340-15-102-0854
Clamping Catch

151020854
191-1096/11: RNCC: 3 | RNVC: 2

22 Jun 1986

5340-15-007-2586
Retaining Strap

150072586
1385361: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-205-4097
Mending Plate

152054097
182734122: RNCC: 3 | RNVC: 2
(241)A0199182734122: RNCC: 5 | RNVC: 2

7 Mar 2012

5340-15-144-0143
Handle Grip

151440143
2122429: RNCC: 3 | RNVC: 2
82122429: RNCC: 3 | RNVC: 2

11 Dec 1996

5340-15-112-8185
Vent Plug

151128185
354899: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-007-9861
Retaining Strap

150079861
4649804: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-119-7157
Angle Bracket

151197157
60172977: RNCC: 3 | RNVC: 2

8 Nov 1994

5340-15-107-8760
Angle Bracket

151078760
4456033: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-199-4650
Block Clamp

151994650
A464A004A: RNCC: 3 | RNVC: 2
(241)A0126A464A004A: RNCC: 5 | RNVC: 2

12 Apr 2005

5340-15-135-7791
Handle Grip

151357791
7537520: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-102-4451
Butt Hinge

151024451
213A7244-401: RNCC: 3 | RNVC: 2

30 Aug 1988

5340-15-187-6025
Mounting Bracket

151876025
1318465080: RNCC: 3 | RNVC: 2

14 Apr 2009

5340-15-187-6299
Mounting Bracket

151876299
504173416: RNCC: 3 | RNVC: 2

15 Apr 2009

5340-15-188-3511
Retaining Strap

151883511
45450000: RNCC: 3 | RNVC: 2
Z04.02.02.02: RNCC: 5 | RNVC: 2
5340PL0956069: RNCC: 6 | RNVC: 9

3 Sep 2009

5340-15-201-2918
Stand Base

152012918
162505282: RNCC: 3 | RNVC: 2

20 Jul 2006

5340-15-155-1545
Leakproof Seal Plug

151551545
4.75773: RNCC: 2 | RNVC: 3

23 Jan 2002

5340-15-068-4515
Angle Bracket

150684515
02-10-242-11-3: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-118-9197
Mounting Bracket

151189197
73147808: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-103-0040
Retaining Strap

151030040
76001996: RNCC: 3 | RNVC: 2

21 Jun 1987

5340-15-207-8693
Mounting Plate

152078693
504372687: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-181-3678
Metal Grille

151813678
2C1144IS0014: RNCC: 3 | RNVC: 2
(241)A29802C1144IS0014: RNCC: 5 | RNVC: 2

10 Dec 2008

5340-15-162-2082
Flush Lock

151622082
33.429: RNCC: 3 | RNVC: 2

17 May 2001

5340-15-179-1814
Retaining Strap

151791814
SEL.2.223: RNCC: 3 | RNVC: 2

13 Jun 2006

5340-15-204-6883
Drift Bolt

152046883
MR3536C285: RNCC: 3 | RNVC: 2
(241)AG622MR3536C285: RNCC: 5 | RNVC: 2

12 Dec 2011

5340-15-187-4963
Retaining Band

151874963
KE234000047: RNCC: 3 | RNVC: 2
(241)AG315KE234000047: RNCC: 5 | RNVC: 2

6 Apr 2009

5340-15-059-2482
Retaining Strap

150592482
1127-15-995: RNCC: 3 | RNVC: 2

12 Oct 1974

5340-15-108-6342
Spring Tension Clip

151086342
60136154: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-112-3480
Retaining Strap

151123480
4837065: RNCC: 3 | RNVC: 2
(7001)5340151123480: RNCC: 5 | RNVC: 2

7 Oct 1989

5340-15-193-7457
Swivel Caster

151937457
28209: RNCC: 3 | RNVC: 2

7 Jul 2010

5340-15-052-0718
Mounting Plate

150520718
169-5: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-063-2848
Retaining Strap

150632848
60110330: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-156-1536
Angle Bracket

151561536
60197472: RNCC: 3 | RNVC: 2

6 Dec 2002

5340-15-001-5450
Mending Plate

150015450
182707395: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-15-007-2048
Angle Bracket

150072048
1383626: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-117-5908
Loop Clamp

151175908
MC412.20C: RNCC: 3 | RNVC: 2

4 Nov 1994

5340-15-178-6491
Mounting Plate

151786491
2231.061.0002: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-114-8768
Retaining Band

151148768
269180G1: RNCC: 3 | RNVC: 2

21 Aug 1992

5340-15-008-0013
Bow Handle

150080013
710970: RNCC: 3 | RNVC: 2

26 May 1981

5340-15-149-1122
Bow Handle

151491122
60174462: RNCC: 3 | RNVC: 2

2 Dec 1998

5340-15-066-0319
Shimmy Damper

150660319
25.20 16MA: RNCC: 3 | RNVC: 2

7 Nov 1985

5340-15-040-4195
Handle Grip

150404195
7-5613-100-25635-2: RNCC: 3 | RNVC: 2
7-5613-1-00-25635-2: RNCC: 5 | RNVC: 2

10 Apr 1970

5340-15-120-0862
Angle Bracket

151200862
60149383: RNCC: 3 | RNVC: 2

19 Dec 1994

5340-15-120-2642
Expansion Plug

151202642
17883587: RNCC: 3 | RNVC: 2

9 Mar 1995

5340-15-188-4273
Mounting Plate

151884273
500403754: RNCC: 3 | RNVC: 2

9 Sep 2009

5340-15-155-4090
Angle Bracket

151554090
500361284: RNCC: 3 | RNVC: 2

12 Mar 2002

5340-15-118-4456
Friction Catch

151184456
60151939: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-118-7760
Expansion Plug

151187760
10160701: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-007-9787
Clamping Catch

150079787
4423826: RNCC: 3 | RNVC: 2
4423826: RNCC: 5 | RNVC: 9

22 Sep 1979

5340-15-133-9099
Handle Grip

151339099
4454574: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-179-0152
Mounting Bracket

151790152
3007644: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-206-6533
Loop Clamp

152066533
18091192: RNCC: 3 | RNVC: 2
(241)A424918091192: RNCC: 5 | RNVC: 2

28 Jun 2012

5340-15-008-5518
Retaining Strap

150085518
012122 B: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-062-8189
Swivel Caster

150628189
150219010110: RNCC: 3 | RNVC: 2

12 Oct 1982

5340-15-116-2306
Screw Thread Insert

151162306
M4(X0,7)X1D: RNCC: 3 | RNVC: 2
210602503: RNCC: 5 | RNVC: 2

30 Mar 1993

5340-15-001-7959
Mounting Bracket

150017959
5949783405: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-065-5170
Butt Hinge

150655170
1355-09-156: RNCC: 3 | RNVC: 2

9 Feb 1985

5340-15-009-1027
Retaining Strap

150091027
1141-38-102: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-197-1753
Rim Lock Set

151971753
PN UAS 00036900: RNCC: 3 | RNVC: 2
5340F76031818: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-177-4336
Mounting Bracket

151774336
051151: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-197-1755
Rim Lock Set

151971755
PN UAS 00037053: RNCC: 3 | RNVC: 2
5340F76031820: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-186-9304
Synchro Clamp

151869304
04023025: RNCC: 3 | RNVC: 2
62800281: RNCC: 5 | RNVC: 2
IMT00075: RNCC: 5 | RNVC: 2

5 Jan 2009

5340-15-007-1898
Retaining Strap

150071898
1384123: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-214-0692
Angle Bracket

152140692
42072198: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-119-0273
Angle Bracket

151190273
70688590: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-005-1635
Mending Plate

150051635
4380646: RNCC: 3 | RNVC: 2
4380646: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-122-3535
Rod End Connector

151223535
D1401306: RNCC: 3 | RNVC: 2

25 May 2000

5340-15-115-5345
Handle Grip

151155345
D0371993: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-153-3025
Handle Grip

151533025
122605157: RNCC: 2 | RNVC: 3

13 Dec 2000

5340-15-118-7054
Mounting Bracket

151187054
73132129: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-119-0202
Mending Plate

151190202
70670195: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-144-9998
Mounting Plate

151449998
E5237.0000: RNCC: 5 | RNVC: 2
E5237.0000: RNCC: 5 | RNVC: 9

26 Feb 1997

5340-15-148-3555
Angle Bracket

151483555
151713: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-119-4178
Mending Plate

151194178
142507026: RNCC: 3 | RNVC: 2

26 Jul 1994

5340-15-007-9150
Angle Bracket

150079150
1392078: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-179-6752
Latch Bar

151796752
0000500402019: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-007-8873
Strap Hinge

150078873
1386565: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-150-0948
Loop Clamp

151500948
044080023: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-179-2724
Access Cover

151792724
76045460: RNCC: 3 | RNVC: 2
(241)A398076045460: RNCC: 5 | RNVC: 2

10 Aug 2006

5340-15-105-2173
Mending Plate

151052173
596678: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-000-1113
Control Rod

150001113
C72848: RNCC: 3 | RNVC: 2

30 Jan 2013

5340-15-139-3360
Handle Grip

151393360
1903782: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-062-9237
Retaining Strap

150629237
0-101578: RNCC: 3 | RNVC: 2

28 Aug 1981

5340-15-122-2487
Mounting Bracket

151222487
80A068516: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-063-0603
Mending Plate

150630603
0-100281: RNCC: 3 | RNVC: 2

30 Apr 1982

5340-15-149-2353
Mounting Bracket

151492353
566.62097.2: RNCC: 3 | RNVC: 2
566.62097.2: RNCC: 5 | RNVC: 2

23 Dec 1998

5340-15-157-1796
Loop Clamp

151571796
A071A022NB: RNCC: 3 | RNVC: 2
(241)A0126A071A022NB: RNCC: 5 | RNVC: 2

15 May 2003

5340-15-063-5956
Spring Tension Clip

150635956
4459574: RNCC: 3 | RNVC: 2
4459574: RNCC: 5 | RNVC: 9

13 Nov 1982

5340-15-119-1044
Loop Clamp

151191044
70933135: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-111-8041
Plug Button

151118041
031341/1: RNCC: 3 | RNVC: 2

1 Jul 1990

5340-15-064-1855
Screw Thread Insert

150641855
SC.05023: RNCC: 3 | RNVC: 2

1 Jun 1982

5340-15-052-2067
Retaining Strap

150522067
8-023-031: RNCC: 3 | RNVC: 2
8-023-031: RNCC: 5 | RNVC: 9
8-023-031: RNCC: 5 | RNVC: 9

4 Oct 1971

5340-15-107-2499
Handle Grip

151072499
3070-000009: RNCC: 3 | RNVC: 2
3070-09: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-155-0956
Clamping Catch

151550956
121101111: RNCC: 3 | RNVC: 2
142024296: RNCC: 3 | RNVC: 2
N27-633: RNCC: 3 | RNVC: 2

18 Jan 2002

5340-15-118-6558
Loop Clamp

151186558
70929720: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-000-2977
Mounting Bracket

150002977
SNCA-WM20FC: RNCC: 3 | RNVC: 2

18 Feb 2013

5340-15-155-4885
Mounting Bracket

151554885
CBD71191P07: RNCC: 3 | RNVC: 2

27 Mar 2002

5340-15-149-3157
Angle Bracket

151493157
4886142: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-204-4119
Runner

152044119
T305: RNCC: 3 | RNVC: 2

2 Nov 2011

5340-15-205-2558
Rod End Connector

152052558
504378631: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-153-5200
Access Cover

151535200
142025192: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-148-1907
Pipe Hanger

151481907
555908015000: RNCC: 3 | RNVC: 2

1 Jul 1998

5340-15-108-9565
Mending Plate

151089565
65590920: RNCC: 3 | RNVC: 2

25 May 1989

5340-15-060-2686
Handle Grip

150602686
4-0226U: RNCC: 3 | RNVC: 2

9 Feb 1977

5340-15-152-8059
Mounting Bracket

151528059
P131400: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-148-2794
Cushioning Pad

151482794
G5: RNCC: 3 | RNVC: 2

30 Sep 1998

5340-15-179-4343
Lock-Release Lever

151794343
46185104: RNCC: 3 | RNVC: 2

28 Nov 2006

5340-15-064-3730
Plug Button

150643730
4696237: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-001-5458
Access Cover

150015458
182719576: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-15-105-4420
Handle Grip

151054420
579387: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-203-2497
Access Cover

152032497
1Q 615065: RNCC: 3 | RNVC: 2

13 Dec 2007

5340-15-116-4907
Retaining Strap

151164907
60161244: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-177-3842
Mounting Bracket

151773842
034037: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-153-9595
Loop Clamp

151539595
M20/32UNI9209ACC.INOX-ZN: RNCC: 3 | RNVC: 2
230026521: RNCC: 5 | RNVC: 2

12 Mar 2001

5340-15-051-2460
Angle Bracket

150512460
TM478863-1280: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-162-2682
Plug Button

151622682
98.05.44.12: RNCC: 3 | RNVC: 2

17 May 2001

5340-15-203-8667
Handle Grip

152038667
504013629: RNCC: 3 | RNVC: 2
504013629: RNCC: 3 | RNVC: 2
(241)AF908504013629: RNCC: 5 | RNVC: 2

11 Jul 2011

5340-15-189-2297
Retaining Strap

151892297
584026: RNCC: 3 | RNVC: 2

9 Feb 2010

5340-15-203-4539
Handwheel

152034539
N632U1013201: RNCC: 3 | RNVC: 2

4 Feb 2008

5340-15-118-7185
Access Cover

151187185
73131697: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-151-8683
Mending Plate

151518683
60118054: RNCC: 3 | RNVC: 2

14 Jul 2000

5340-15-120-0240
Catch Strike

151200240
79010787: RNCC: 3 | RNVC: 2

5 Dec 1994

5340-15-101-7954
Roller Holder

151017954
GE7251051: RNCC: 3 | RNVC: 2

30 Sep 1987

5340-15-179-6852
Mounting Bracket

151796852
00194567: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-117-5256
Mounting Bracket

151175256
020.015665: RNCC: 5 | RNVC: 9

4 Nov 1993

5340-15-059-9383
Loop Clamp

150599383
73091: RNCC: 3 | RNVC: 2

16 Oct 1976

5340-15-112-9378
Loop Clamp

151129378
21612015A: RNCC: 3 | RNVC: 2

20 Apr 1996

5340-15-177-3689
Mounting Bracket

151773689
021194: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-063-2813
Angle Bracket

150632813
60109170: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-041-4044
Handle Grip

150414044
IS010: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-118-9430
Mounting Bracket

151189430
73157550: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-204-8494
Door Handle

152048494
C07-00041: RNCC: 3 | RNVC: 2
(241)A7904C07-00041: RNCC: 5 | RNVC: 2

17 Jan 2012

5340-15-100-1076
Access Door Hinge

151001076
P-852585-001: RNCC: 3 | RNVC: 2
P852585-001: RNCC: 5 | RNVC: 2

10 Sep 1986

5340-15-004-8028
Angle Bracket

150048028
P-110579-003: RNCC: 3 | RNVC: 2
P110579-003: RNCC: 5 | RNVC: 2

18 Jul 1978

5340-15-107-2316
Retaining Strap

151072316
65958-101: RNCC: 3 | RNVC: 2

26 Jan 1988

5340-15-123-1158
Handle Grip

151231158
4741738: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-064-8472
Retaining Strap

150648472
000202987800: RNCC: 5 | RNVC: 2
000202987800: RNCC: 5 | RNVC: 9

16 Nov 1984

5340-15-063-7836
Retaining Strap

150637836
1127382: RNCC: 3 | RNVC: 2
77901321: RNCC: 5 | RNVC: 2

31 Mar 1982

5340-15-121-8868
Angle Bracket

151218868
206-9320-05-4: RNCC: 3 | RNVC: 2

19 Mar 1996

5340-15-207-4298
Retaining Strap

152074298
303033: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-15-157-4475
Rod End Connector

151574475
13HJ04143206S01-409-003: RNCC: 3 | RNVC: 2

17 Jul 2003

5340-15-155-0491
Angle Bracket

151550491
J92440235-001: RNCC: 3 | RNVC: 2

9 Jan 2002

5340-15-107-5148
Expansion Plug

151075148
1391126: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-237-3173
Hoist Hook

152373173
321537: RNCC: 3 | RNVC: 2
534015E132227: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-119-1469
Mounting Bracket

151191469
73125905: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-204-3225
Bow Handle

152043225
0000500429810: RNCC: 3 | RNVC: 2
(241)A39630000500429810: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-107-1426
Screw Thread Insert

151071426
IN38KM4: RNCC: 3 | RNVC: 2
7-210091413: RNCC: 5 | RNVC: 2

14 Apr 1987

5340-15-062-4630
Bow Handle

150624630
A00601-01-20: RNCC: 3 | RNVC: 2
A00601-01-20: RNCC: 5 | RNVC: 2

31 Mar 1982

5340-15-051-3248
Retaining Strap

150513248
4553833: RNCC: 3 | RNVC: 2
4553833: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-157-6674
Angle Bracket

151576674
11031903: RNCC: 3 | RNVC: 2
(241)A977211031903: RNCC: 5 | RNVC: 2

15 Oct 2003

5340-15-009-1995
Catch Strike

150091995
1378948: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-103-0698
Screw Thread Insert

151030698
L1971008: RNCC: 3 | RNVC: 2
DE160.03.291: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-118-4036
Angle Bracket

151184036
60165244: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-145-0714
Loop Clamp

151450714
18088192: RNCC: 3 | RNVC: 2
A202011-010: RNCC: 5 | RNVC: 2

15 Apr 1997

5340-15-065-1109
Retaining Strap

150651109
14155: RNCC: 3 | RNVC: 2

6 Mar 1984

5340-15-152-6797
Hand Crank

151526797
4B90103800: RNCC: 3 | RNVC: 2

10 Oct 2000

5340-15-009-2061
Retaining Strap

150092061
8540133: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-151-7004
Mending Plate

151517004
60113290: RNCC: 3 | RNVC: 2

3 Jul 2000

5340-15-008-7087
Angle Bracket

150087087
FL0711-101: RNCC: 3 | RNVC: 2

11 Dec 1981

5340-15-207-8723
Access Cover

152078723
504375233: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-121-0860
Vent Plug

151210860
SF0150-POLIP: RNCC: 3 | RNVC: 2

22 Dec 1995

5340-15-051-2072
Retaining Strap

150512072
92-032-101: RNCC: 3 | RNVC: 2
92-032-101: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-060-5735
Rod End Clevis

150605735
27384-901A1: RNCC: 3 | RNVC: 2

25 May 1977

5340-15-118-4589
Mending Plate

151184589
60153616: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-061-2641
Screw Thread Insert

150612641
000200037700: RNCC: 5 | RNVC: 2
1200096-111410004: RNCC: 5 | RNVC: 2
000200037700: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-188-2870
Access Cover

151882870
1R 598923: RNCC: 3 | RNVC: 2

1 Sep 2009

5340-15-055-6367
Mortise Lock Set

150556367
DIS1971TAV028MSENSP: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-148-3525
Mending Plate

151483525
150605: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-118-4790
Rod End Connector

151184790
33421/4: RNCC: 3 | RNVC: 2
33421/4: RNCC: 5 | RNVC: 9

6 Feb 1995

5340-15-151-9621
Angle Bracket

151519621
0-173615: RNCC: 3 | RNVC: 2
00173615: RNCC: 3 | RNVC: 2
1PA39630-173615: RNCC: 5 | RNVC: 2
(241)A39630-173615: RNCC: 5 | RNVC: 2

27 Jul 2000

5340-15-121-7491
Spring Holder

151217491
741813: RNCC: 3 | RNVC: 2

14 Feb 1996

5340-15-118-7097
Mounting Bracket

151187097
73129362: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-189-3616
Mounting Bracket

151893616
40G1020000: RNCC: 3 | RNVC: 2
40G1020000: RNCC: 5 | RNVC: 2

17 Feb 2010

5340-15-179-9525
Bridge Clamp

151799525
98487768: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-207-5963
Loop Clamp

152075963
178904082: RNCC: 3 | RNVC: 2
(241)A0199178904082: RNCC: 5 | RNVC: 2

5 Nov 2012

5340-15-073-8910
Flush Lock

150738910
13A65X80-3LEVE: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-062-9178
Loop Clamp

150629178
0-100282: RNCC: 3 | RNVC: 2

28 Aug 1981

5340-15-058-8884
Loop Clamp

150588884
181A4: RNCC: 5 | RNVC: 2
181A4: RNCC: 5 | RNVC: 9

30 Dec 1974

5340-15-073-5230
Rim Lock

150735230
39B75X30: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-175-1150
Bridge Clamp

151751150
2B020012: RNCC: 3 | RNVC: 2
628116: RNCC: 5 | RNVC: 2

29 Dec 2003

5340-15-179-8949
Mounting Bracket

151798949
D1308589: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-118-7554
Loop Clamp

151187554
9434851: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-155-4463
Mounting Bracket

151554463
CBD70717P14: RNCC: 3 | RNVC: 2

25 Mar 2002

5340-15-187-2032
Mounting Bracket

151872032
SC 100 659: RNCC: 3 | RNVC: 2
(241)A3980SC100659: RNCC: 5 | RNVC: 2

24 Feb 2009

5340-15-153-8095
Retaining Strap

151538095
01100A106050: RNCC: 5 | RNVC: 3
01100A106050: RNCC: 5 | RNVC: 9

1 Mar 2001

5340-15-149-2958
Filler Opening Cap

151492958
4882506: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-064-0924
Angle Bracket

150640924
8845: RNCC: 3 | RNVC: 2

28 Aug 1983

5340-15-153-2906
Handle Grip

151532906
122505623: RNCC: 2 | RNVC: 3

13 Dec 2000

5340-15-116-4802
Angle Bracket

151164802
60165521: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-109-3750
Cushioning Pad

151093750
5137-279-19: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-112-2570
Access Door Hinge

151122570
311A2906-001: RNCC: 3 | RNVC: 2

28 Feb 1991

5340-15-152-3926
Loop Clamp

151523926
0-119208: RNCC: 3 | RNVC: 2
00119208: RNCC: 3 | RNVC: 2
(241)A39630-119208: RNCC: 5 | RNVC: 2
1PA39630-119208: RNCC: 5 | RNVC: 2

6 Sep 2000

5340-15-199-8435
Roller Holder

151998435
9F45040D01: RNCC: 3 | RNVC: 2
(241)A91729F45040D01: RNCC: 5 | RNVC: 2

14 Jun 2005

5340-15-202-8451
Mounting Bracket

152028451
9.3040.0390.A: RNCC: 3 | RNVC: 2
(241)A92169.3040.0390.A: RNCC: 5 | RNVC: 2

23 Jul 2007

5340-15-195-9306
Hook Handle

151959306
346B9520A1210.401: RNCC: 3 | RNVC: 2
(241)A2142346B9520A1210.401: RNCC: 5 | RNVC: 2

27 May 2011

5340-15-001-7871
Mounting Bracket

150017871
5949780583: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-001-8239
Mounting Bracket

150018239
5949790568: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-064-5891
Loop Clamp

150645891
1389023: RNCC: 3 | RNVC: 2

17 Nov 1983

5340-15-062-6562
Retaining Strap

150626562
0-08786: RNCC: 3 | RNVC: 2

19 Jul 1982

5340-15-177-4062
Mounting Bracket

151774062
043012: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-197-1762
Rim Lock Set

151971762
PN UAS 00006584: RNCC: 3 | RNVC: 2
5340F76023126: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-153-8811
Mounting Bracket

151538811
00081423: RNCC: 3 | RNVC: 2
(241)A333400081423: RNCC: 4 | RNVC: 1
9142T3: RNCC: 5 | RNVC: 2

8 Mar 2001

5340-15-001-0655
Rod End Clevis

150010655
5124T32P02: RNCC: 3 | RNVC: 2

24 May 2013

5340-15-001-3157
Swivel Caster

150013157
00102512: RNCC: 3 | RNVC: 2

17 Jun 2013

5340-15-181-1730
Loop Clamp

151811730
165040106: RNCC: 3 | RNVC: 2
(241)A0199165040106: RNCC: 5 | RNVC: 2

5 Nov 2008

5340-15-073-5227
Rim Lock

150735227
39A75X40: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-007-2506
Loop Clamp

150072506
1372109: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-112-9164
Expansion Plug

151129164
58705: RNCC: 3 | RNVC: 2
58705F01: RNCC: 3 | RNVC: 2

9 Jan 1996

5340-15-051-5026
Retaining Strap

150515026
T2I47C: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-169-7559
Coat And Hat Hook

151697559
F72018453: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-149-3140
Angle Bracket

151493140
4886069: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-199-5031
Angle Bracket

151995031
1Q 605078: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-15-119-7901
Catch Strike

151197901
70669981: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-007-4980
Mending Plate

150074980
1139-03-122: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-110-7975
Handle Grip

151107975
92780-101A00: RNCC: 3 | RNVC: 2
92780-101: RNCC: 5 | RNVC: 2

1 Aug 1990

Load More Results