What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 13 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 13 of 72

5340-15-009-1757
Handle Grip

150091757
60105542: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-117-1953
Angle Bracket

151171953
190521145: RNCC: 3 | RNVC: 2

2 Sep 1993

5340-15-089-5814
Butt Hinge

150895814
16930-100: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-118-4003
Angle Bracket

151184003
60160739: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-103-6694
Mending Plate

151036694
24009326A: RNCC: 3 | RNVC: 2

26 Nov 1987

5340-15-002-3065
Mounting Plate

150023065
5801400625: RNCC: 3 | RNVC: 2

5 Aug 2013

5340-15-177-4018
Mounting Plate

151774018
041280: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-002-0807
Handle Grip

150020807
2104006: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-121-5401
Access Cover

151215401
132521108: RNCC: 3 | RNVC: 2

15 Jan 1996

5340-15-050-1554
Rod End Clevis

150501554
2-2407-201-47969: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-001-0660
Rod End Clevis

150010660
5126T01G01: RNCC: 3 | RNVC: 2

24 May 2013

5340-15-059-4577
Rod End Clevis

150594577
12.62.68.00: RNCC: 3 | RNVC: 2
40.52.01.303: RNCC: 3 | RNVC: 2

10 Apr 1975

5340-15-153-7743
Access Cover

151537743
02700A105400: RNCC: 5 | RNVC: 2
02700A105400: RNCC: 5 | RNVC: 9

28 Feb 2001

5340-15-108-3256
Mending Plate

151083256
60120283: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-004-7792
Loop Clamp

150047792
0-09199: RNCC: 3 | RNVC: 2

7 Sep 1977

5340-15-003-4807
Mending Plate

150034807
4005964: RNCC: 3 | RNVC: 2
4005964: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-105-8407
Retaining Band

151058407
2.6850.013.0: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-103-0969
Retaining Strap

151030969
817.10.041: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-006-2036
Mending Plate

150062036
592915: RNCC: 3 | RNVC: 2

27 Mar 1979

5340-15-058-3993
Rod End Connector

150583993
553802143000: RNCC: 2 | RNVC: 3
538-02-1430: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-148-8260
Mending Plate

151488260
03-633MSZN: RNCC: 3 | RNVC: 2
180506115: RNCC: 5 | RNVC: 2

7 Oct 1998

5340-15-129-9318
Angle Bracket

151299318
4146038: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-060-2363
Butt Hinge Leaf

150602363
750408X: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-119-7265
Pawl Fastener

151197265
60170023: RNCC: 3 | RNVC: 2

8 Nov 1994

5340-15-206-4035
Padlock

152064035
F0380478: RNCC: 3 | RNVC: 2
(241)AE343F0380478: RNCC: 5 | RNVC: 2

6 Jun 2012

5340-15-112-2484
Angle Bracket

151122484
355A9043-401: RNCC: 3 | RNVC: 2

11 Mar 1991

5340-15-119-7836
Mechanical Stop

151197836
11061076: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-001-7734
Mounting Plate

150017734
150 000 13-15: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-181-1716
Control Rod

151811716
178950224: RNCC: 3 | RNVC: 2
(241)A0199178950224: RNCC: 5 | RNVC: 2

5 Nov 2008

5340-15-119-0876
Loop Clamp

151190876
70929808: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-003-1381
Loop Clamp

150031381
18087691: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-199-4636
Loop Clamp

151994636
A071A014NB: RNCC: 3 | RNVC: 2
(241)A0126A071A014NB: RNCC: 5 | RNVC: 2

12 Apr 2005

5340-15-205-5140
Loop Clamp

152055140
179040171: RNCC: 3 | RNVC: 2
(241)A0199179040171: RNCC: 5 | RNVC: 2

15 Mar 2012

5340-15-063-7381
Loop Clamp

150637381
40.24.01.317: RNCC: 3 | RNVC: 2
12.15.78.00: RNCC: 5 | RNVC: 2

10 May 1983

5340-15-060-6070
Mending Plate

150606070
27174-101: RNCC: 3 | RNVC: 2

15 Jun 1977

5340-15-065-7262
Retaining Strap

150657262
109-0512-19-3: RNCC: 3 | RNVC: 2

16 Dec 1984

5340-15-109-4847
Retaining Strap

151094847
D9103010P: RNCC: 3 | RNVC: 2
D9103010P: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-109-1800
Retaining Strap

151091800
60103620: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-118-8615
Access Cover

151188615
299709557F: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-109-5054
Bow Handle

151095054
60138657: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-109-0185
Angle Bracket

151090185
60105589: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-109-6177
Plain Solid Disk

151096177
DOZ4955: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-163-3888
Mechanical Stop

151633888
9478391: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-151-6004
Mending Plate

151516004
2532556: RNCC: 3 | RNVC: 2

19 Jun 2000

5340-15-200-2999
Mending Plate

152002999
190509418: RNCC: 3 | RNVC: 2

29 Nov 2005

5340-15-119-5675
Mending Plate

151195675
4839491: RNCC: 3 | RNVC: 2

19 Sep 1994

5340-15-188-3392
Snap Hook

151883392
557181: RNCC: 3 | RNVC: 2
13386: RNCC: 5 | RNVC: 2
557 V 1: RNCC: 5 | RNVC: 2
392361112108: RNCC: 6 | RNVC: 9

2 Sep 2009

5340-15-062-9204
Retaining Strap

150629204
0-100374: RNCC: 3 | RNVC: 2

9 Jul 1981

5340-15-207-0042
Mounting Bracket

152070042
4186T98G01: RNCC: 3 | RNVC: 2
(241)A34604186T98G01: RNCC: 5 | RNVC: 2

8 Aug 2012

5340-15-177-4332
Bridge Clamp

151774332
051117: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-145-0774
Loop Clamp

151450774
8965571: RNCC: 3 | RNVC: 2
(241)A42498965571: RNCC: 5 | RNVC: 2

17 Apr 1997

5340-15-118-9134
Loop Clamp

151189134
70644006: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-063-9906
Mending Plate

150639906
71-06840: RNCC: 3 | RNVC: 2

7 Oct 1983

5340-15-115-5737
Loop Clamp

151155737
4885749: RNCC: 3 | RNVC: 2

5 Dec 1992

5340-15-063-0611
Retaining Strap

150630611
0-100420: RNCC: 3 | RNVC: 2

30 Apr 1982

5340-15-177-3030
Angle Bracket

151773030
P-852636-002: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-199-9684
Retaining Strap

151999684
94038-001: RNCC: 3 | RNVC: 2

31 Jul 2005

5340-15-121-9879
Angle Bracket

151219879
60177335: RNCC: 3 | RNVC: 2

4 Apr 1996

5340-15-001-5707
Mending Plate

150015707
SGMSGHCAP000: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-007-2220
Angle Bracket

150072220
1398075: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-107-1178
Lock-Release Lever

151071178
301-01-8090: RNCC: 3 | RNVC: 2

14 Apr 1987

5340-15-113-9691
Bow Handle

151139691
252A3047-001: RNCC: 3 | RNVC: 2

31 Mar 1992

5340-15-105-2170
Mending Plate

151052170
503-03-3052: RNCC: 5 | RNVC: 2
503-03-3052: RNCC: 5 | RNVC: 9

30 May 1989

5340-15-168-9709
Door Closer

151689709
F72003574: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-060-4788
Door Handle

150604788
1026-04-168: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-063-3760
Angle Bracket

150633760
60114880: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-065-4581
Loop Clamp

150654581
ABA-4: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-15-118-9601
Expansion Plug

151189601
75205930: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-115-3551
Access Door Hinge

151153551
538-21-1070: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-179-6485
Angle Bracket

151796485
J53350630-004: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-004-7626
Retaining Strap

150047626
68155-101: RNCC: 3 | RNVC: 2

10 Apr 1978

5340-15-115-3487
Rod End Clevis

151153487
538-04-1400: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-119-0189
Loop Clamp

151190189
70666310: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-111-2806
Mending Plate

151112806
DOA0120693: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-158-5678
Access Cover

151585678
162518246: RNCC: 3 | RNVC: 2

9 Mar 2004

5340-15-065-6817
Retaining Strap

150656817
6-12088-101-75057A1: RNCC: 3 | RNVC: 2

9 Jul 1985

5340-15-188-0726
Filler Opening Cap

151880726
B 0018 047: RNCC: 3 | RNVC: 2
B0018047: RNCC: 3 | RNVC: 2
(241)A3593092758: RNCC: 5 | RNVC: 2
092758: RNCC: 5 | RNVC: 2
(241)AH394B0018047: RNCC: 5 | RNVC: 2
(7001)5310151880726: RNCC: 5 | RNVC: 2

30 Jun 2009

5340-15-187-8182
Mounting Bracket

151878182
018.066.00.16: RNCC: 3 | RNVC: 2
(241)A6479018.066.00.16: RNCC: 5 | RNVC: 2
018.066.00.16: RNCC: 5 | RNVC: 2

7 May 2009

5340-15-112-9004
Loop Clamp

151129004
42484888: RNCC: 3 | RNVC: 2

15 Oct 1988

5340-15-151-4594
Hook Handle

151514594
UOXM0640100: RNCC: 3 | RNVC: 2

29 May 2000

5340-15-059-7243
Butt Hinge Leaf

150597243
260-05-135-13: RNCC: 3 | RNVC: 2
260-05-135-13: RNCC: 5 | RNVC: 9

19 May 1976

5340-15-153-9357
Vent Plug

151539357
142050318: RNCC: 3 | RNVC: 2
SFP30-16X1.5+F: RNCC: 5 | RNVC: 2

12 Mar 2001

5340-15-153-5161
Expansion Plug

151535161
142003219: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-148-3526
Mending Plate

151483526
151537: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-153-5254
Filler Opening Cap

151535254
442000000/72/01: RNCC: 3 | RNVC: 2
ICF 10: RNCC: 5 | RNVC: 2

7 Feb 2001

5340-15-000-5789
Mounting Bracket

150005789
C0090291: RNCC: 3 | RNVC: 2

20 Mar 2013

5340-15-100-7034
Lock-Release Lever

151007034
808-91777-1: RNCC: 3 | RNVC: 2

1 Jul 1987

5340-15-187-4829
Loop Clamp

151874829
A071A028NB: RNCC: 1 | RNVC: 2
TA028M014NB28: RNCC: 3 | RNVC: 2
(241)84971TA028M014NB28: RNCC: 5 | RNVC: 2

3 Apr 2009

5340-15-207-4764
Snap Hook

152074764
HK.H.I.003/4: RNCC: 3 | RNVC: 2
(241)AG941HK.H.I.003/4: RNCC: 5 | RNVC: 2

17 Oct 2012

5340-15-001-8433
Mounting Bracket

150018433
500434828: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-062-7923
Retaining Strap

150627923
0-34173: RNCC: 3 | RNVC: 2

28 Aug 1982

5340-15-195-2171
Mounting Plate

151952171
209503038: RNCC: 3 | RNVC: 2
209503038: RNCC: 5 | RNVC: 2
CV173657: RNCC: 5 | RNVC: 2

7 Mar 2011

5340-15-189-0524
Protection Bellows

151890524
0-122465: RNCC: 3 | RNVC: 2
00122465: RNCC: 3 | RNVC: 2
(241)A396300122465: RNCC: 5 | RNVC: 2

21 Jan 2010

5340-15-059-3537
Retaining Strap

150593537
1127-36-237: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-054-9973
Webbing Strap

150549973
330-0189-01: RNCC: 3 | RNVC: 2

6 Jul 1971

5340-15-060-4448
Sliding Door Hanger

150604448
22270-901: RNCC: 3 | RNVC: 2
22279-901: RNCC: 5 | RNVC: 2

13 Apr 1977

5340-15-002-8799
Threaded Rod End

150028799
5001836297: RNCC: 3 | RNVC: 2

14 Oct 2013

5340-15-060-6824
Butt Hinge

150606824
1971TAV69-25: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-063-3762
Retaining Strap

150633762
60116035: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-003-9008
Mounting Plate

150039008
182707628: RNCC: 3 | RNVC: 2
(241)A0199182707628: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-053-3439
Rod End Clevis

150533439
5-16161-101-72896: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-007-3317
Access Cover

150073317
1376-19-215: RNCC: 3 | RNVC: 2
137619215: RNCC: 5 | RNVC: 2

6 Jul 2000

5340-15-103-1008
Loop Clamp

151031008
L3616018: RNCC: 3 | RNVC: 2
(241)A5015DE160.03.091: RNCC: 5 | RNVC: 2
DE160.03.091: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-118-9122
Loop Clamp

151189122
70639313: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-151-1709
Mounting Bracket

151511709
AF060182003: RNCC: 3 | RNVC: 2

14 Apr 2000

5340-15-062-9056
Retaining Strap

150629056
0-55570: RNCC: 3 | RNVC: 2

9 Jul 1981

5340-15-151-7861
Angle Bracket

151517861
0-179596: RNCC: 3 | RNVC: 2

10 Jul 2000

5340-15-193-1787
Expansion Shield

151931787
MQS630: RNCC: 3 | RNVC: 2
(241)AA136MQS630: RNCC: 5 | RNVC: 2

20 Apr 2010

5340-15-002-1660
Access Cover

150021660
42567100: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-118-3659
Mending Plate

151183659
60141535: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-120-2731
Angle Bracket

151202731
98429634: RNCC: 3 | RNVC: 2

9 Mar 1995

5340-15-104-4358
Expansion Plug

151044358
3640290: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-112-3498
Angle Bracket

151123498
60156658: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-108-9847
Retaining Strap

151089847
10113601: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-198-2803
Mending Plate

151982803
M775045: RNCC: 3 | RNVC: 2

14 Sep 2004

5340-15-111-7973
Mending Plate

151117973
9915: RNCC: 3 | RNVC: 2

1 Jul 1990

5340-15-065-6029
Retaining Band

150656029
109-0616-48-2: RNCC: 3 | RNVC: 2

16 Dec 1984

5340-15-068-8358
Butt Hinge Leaf

150688358
66-6487-6: RNCC: 3 | RNVC: 2

6 Oct 1986

5340-15-168-9450
Coat And Hat Hook

151689450
F72001828: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-206-3301
Protection Bellows

152063301
504266696: RNCC: 3 | RNVC: 2

4 Jun 2012

5340-15-152-5781
Clamp Bolt Assembly

151525781
FG211-36-24: RNCC: 3 | RNVC: 2

27 Sep 2000

5340-15-007-0720
Handle Grip

150070720
1137-16-901: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-206-8469
Mounting Plate

152068469
50041 6561: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-151-1898
Angle Bracket

151511898
AF060180800: RNCC: 3 | RNVC: 2

14 Apr 2000

5340-15-059-7404
Screw Thread Insert

150597404
1182-20317: RNCC: 3 | RNVC: 2

5 Feb 1976

5340-15-194-1295
Butt Hinge

151941295
0709 21830: RNCC: 3 | RNVC: 2

16 Sep 2010

5340-15-001-8394
Mounting Bracket

150018394
500436986: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-160-5506
Coat And Hat Hook

151605506
F720106281: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-103-2992
Spring Holder

151032992
55965: RNCC: 3 | RNVC: 2

30 Nov 1986

5340-15-118-9529
Mounting Bracket

151189529
75204504: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-178-7675
Mounting Bracket

151787675
040097: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-153-9050
Mounting Bracket

151539050
9422T7: RNCC: 3 | RNVC: 2
(241)A333400084227: RNCC: 4 | RNVC: 1
00084227: RNCC: 5 | RNVC: 2

9 Mar 2001

5340-15-121-2669
Access Cover

151212669
0390302402: RNCC: 3 | RNVC: 2

7 Nov 1995

5340-15-153-6999
Mounting Bracket

151536999
121202424: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-116-7778
Loop Clamp

151167778
D40-COMP39: RNCC: 3 | RNVC: 2

21 Apr 1994

5340-15-201-0163
Loop Clamp

152010163
315P8252-00: RNCC: 3 | RNVC: 2

10 May 2006

5340-15-109-9339
Angle Bracket

151099339
02-10-242-11-6: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-110-0525
Rod End Clevis

151100525
211A7050-003: RNCC: 3 | RNVC: 2

1 Mar 1990

5340-15-109-0837
Angle Bracket

151090837
60110138: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-064-7655
Angle Bracket

150647655
61.70.42.00: RNCC: 3 | RNVC: 2

26 Dec 1983

5340-15-103-6831
Butt Hinge

151036831
24009522A: RNCC: 3 | RNVC: 2

26 Nov 1987

5340-15-109-0839
Angle Bracket

151090839
60103085: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-109-1269
Spring Tension Clip

151091269
14184071: RNCC: 3 | RNVC: 2

30 Apr 1988

5340-15-168-9897
Coat And Hat Hook

151689897
F72004319: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-155-8496
Angle Bracket

151558496
6853 499-628: RNCC: 3 | RNVC: 2

7 Aug 2002

5340-15-109-4052
Mending Plate

151094052
5137-303-24: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-065-7717
Butt Hinge Leaf

150657717
W 004621: RNCC: 3 | RNVC: 2

1 Jul 1989

5340-15-008-0565
Loop Clamp

150080565
60104419: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-148-4600
Caster Wheel

151484600
04DIS17.0: RNCC: 3 | RNVC: 2

13 Aug 1998

5340-15-163-3734
Loop Clamp

151633734
9434716: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-063-3691
Loop Clamp

150633691
60108345: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-151-6737
Loop Clamp

151516737
42099076: RNCC: 3 | RNVC: 2
(241)A424942099076: RNCC: 5 | RNVC: 2

26 Jun 2000

5340-15-112-3823
Loop Clamp

151123823
031592/1: RNCC: 3 | RNVC: 2

1 Jul 1990

5340-15-063-8105
Expansion Plug

150638105
1/42826/70: RNCC: 3 | RNVC: 2

31 Mar 1982

5340-15-008-5934
Expansion Plug

150085934
1/43287/01: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-107-2315
Retaining Strap

151072315
22896-101A1: RNCC: 3 | RNVC: 2

26 Jan 1988

5340-15-063-3055
Retaining Clip

150633055
9914407: RNCC: 3 | RNVC: 2

12 Oct 1980

5340-15-197-5416
Door Closer

151975416
PN UAS 00047498: RNCC: 3 | RNVC: 2
5340F76037583: RNCC: 5 | RNVC: 9

8 Apr 2004

5340-15-108-7612
Angle Bracket

151087612
60141374: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-121-3493
Catch Strike

151213493
60162420: RNCC: 3 | RNVC: 2
142046260: RNCC: 8 | RNVC: 2

22 Nov 1995

5340-15-180-4868
Access Cover

151804868
1Q 535354LA: RNCC: 3 | RNVC: 2

3 Jun 2008

5340-15-198-4169
Retaining Strap

151984169
122650055: RNCC: 3 | RNVC: 2

27 Sep 2004

5340-15-109-1789
Retaining Strap

151091789
1395628: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-109-5057
Bow Handle

151095057
60137706: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-179-7327
Mounting Plate

151797327
500335089: RNCC: 3 | RNVC: 2
(241)A4249500335089: RNCC: 5 | RNVC: 2

7 Jun 2007

5340-15-120-4916
Access Cover

151204916
142502070: RNCC: 3 | RNVC: 2

9 Jun 1995

5340-15-102-1198
Retaining Band

151021198
V44/1-03-209: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-003-3378
Handle Grip

150033378
D 2698 0000: RNCC: 3 | RNVC: 2
(241)AG622MR3131D26980000: RNCC: 5 | RNVC: 2
MR3131D26980000: RNCC: 5 | RNVC: 2

4 Nov 2013

5340-15-001-8008
Mounting Bracket

150018008
5949789346: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-121-6579
Loop Clamp

151216579
800052064: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-118-9903
Mounting Bracket

151189903
75207987: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-155-2327
Loop Clamp

151552327
2PR2050: RNCC: 3 | RNVC: 2

11 Feb 2002

5340-15-066-0623
Angle Bracket

150660623
W016391: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-008-0563
Loop Clamp

150080563
60112993: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-117-9600
Retaining Strap

151179600
73062F01: RNCC: 3 | RNVC: 2
73062F01: RNCC: 5 | RNVC: 9

20 Oct 1994

5340-15-177-4094
Access Cover

151774094
045409: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-152-8829
Clamping Catch

151528829
27-633-MS-ZN: RNCC: 3 | RNVC: 2
180506114: RNCC: 5 | RNVC: 2

7 Nov 2000

5340-15-114-4112
Butt Hinge Leaf

151144112
39A3400-28: RNCC: 3 | RNVC: 2

11 Jun 1992

5340-15-188-0300
Mounting Bracket

151880300
CPM500-09-SFJ: RNCC: 3 | RNVC: 2
(241)AFA41CPM500-09-SFJ: RNCC: 5 | RNVC: 2

19 Jun 2009

5340-15-194-3569
Block Clamp

151943569
109-0515-58-13: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-15-118-3850
Mending Plate

151183850
60160000: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-109-6242
Loop Clamp

151096242
002875: RNCC: 3 | RNVC: 2

2 Dec 1989

5340-15-206-8048
Loop Clamp

152068048
ED0024711110-S: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-102-6111
Spring Holder

151026111
67495: RNCC: 3 | RNVC: 2
67495F01: RNCC: 3 | RNVC: 2

4 May 1999

5340-15-177-3707
Mounting Bracket

151773707
022996: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-108-7979
Rim Latch

151087979
1369168: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-111-9503
Butt Hinge

151119503
275A2142-401: RNCC: 3 | RNVC: 2

30 Jan 1991

5340-15-204-0398
Loop Clamp

152040398
890 110 147 2: RNCC: 3 | RNVC: 2
172-355-0900: RNCC: 5 | RNVC: 2

19 Aug 2011

5340-15-009-3552
Retaining Strap

150093552
1376-18-580: RNCC: 3 | RNVC: 2
137618580: RNCC: 5 | RNVC: 2

1 Jun 1987

5340-15-059-4057
Spring Tension Clip

150594057
8-3645-500-25817-3: RNCC: 3 | RNVC: 2

28 Oct 1975

5340-15-205-9715
Door Handle

152059715
2051-32: RNCC: 3 | RNVC: 2

23 Apr 2012

5340-15-104-4363
Expansion Plug

151044363
10158400: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-120-2016
Access Cover

151202016
4885321: RNCC: 3 | RNVC: 2

9 Feb 1995

5340-15-020-3815
Loop Clamp

150203815
01-097-01N: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-154-3701
Flush Catch

151543701
A185A040A102: RNCC: 3 | RNVC: 2

10 May 2001

5340-15-194-7906
Control Rod

151947906
51866: RNCC: 3 | RNVC: 2
(241)A348851866: RNCC: 5 | RNVC: 2

14 Jan 2011

5340-15-103-6269
Loop Clamp

151036269
21610719A: RNCC: 3 | RNVC: 2

26 Nov 1987

5340-15-107-5122
Retaining Strap

151075122
7303329: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-178-7506
Mounting Plate

151787506
027058: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-204-8312
Retaining Band

152048312
5219E 4,8X360 NY: RNCC: 3 | RNVC: 2
(241)AK0625219E4,8X360NY: RNCC: 5 | RNVC: 2

13 Jan 2012

5340-15-194-7066
Mounting Bracket

151947066
504208367: RNCC: 3 | RNVC: 2

29 Dec 2010

5340-15-151-4938
Loop Clamp

151514938
10450990: RNCC: 3 | RNVC: 2

31 May 2000

5340-15-109-0858
Retaining Strap

151090858
60110169: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-148-9086
Angle Bracket

151489086
4822915: RNCC: 3 | RNVC: 2

27 Oct 1998

5340-15-170-6119
Mounting Plate

151706119
FK0C90REP06: RNCC: 3 | RNVC: 2
CAE00262: RNCC: 5 | RNVC: 2

2 Apr 2003

5340-15-062-1963
Angle Bracket

150621963
P-892809-001: RNCC: 3 | RNVC: 2
P892809-001: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-154-2233
Corner Brace

151542233
60160534: RNCC: 3 | RNVC: 2

28 Mar 2001

5340-15-179-0040
T Bracket

151790040
RS 413 809 A: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-152-2490
Mounting Bracket

151522490
D22 D369 00P: RNCC: 3 | RNVC: 2

17 Aug 2000

5340-15-180-1590
Loop Clamp

151801590
2471006: RNCC: 3 | RNVC: 2
2471.006: RNCC: 5 | RNVC: 2

15 Feb 2008

5340-15-158-6054
Stand Base

151586054
122606339: RNCC: 3 | RNVC: 2

10 Mar 2004

5340-15-181-1763
Loop Clamp

151811763
179040102: RNCC: 3 | RNVC: 2
(241)A0199179040102: RNCC: 5 | RNVC: 2

5 Nov 2008

5340-15-118-8583
Mounting Bracket

151188583
284709518V: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-202-4520
Luggage Handle

152024520
1660/3: RNCC: 3 | RNVC: 2
(241)A52001660/3: RNCC: 5 | RNVC: 2

25 Mar 2007

5340-15-118-3886
Bow Handle

151183886
60157369: RNCC: 3 | RNVC: 2
(241)A424960157369: RNCC: 5 | RNVC: 2

28 May 1994

5340-15-118-7891
Expansion Plug

151187891
14328101: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-162-3695
Handle Grip

151623695
69854: RNCC: 3 | RNVC: 2

16 Jul 2001

5340-15-178-7315
Loop Clamp

151787315
302D1/4: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-117-6822
Mounting Bracket

151176822
DOR0117177: RNCC: 3 | RNVC: 2

6 Dec 1994

5340-15-112-9189
Loop Clamp

151129189
74066: RNCC: 3 | RNVC: 2

12 Jun 1993

5340-15-179-7258
Mounting Bracket

151797258
42119677: RNCC: 3 | RNVC: 2
(241)A424942119677: RNCC: 5 | RNVC: 2

7 Jun 2007

5340-15-231-6618
Angle Bracket

152316618
0-191163: RNCC: 3 | RNVC: 2
251015E151181: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-062-9019
Retaining Strap

150629019
0-42314: RNCC: 3 | RNVC: 2

9 Jul 1981

5340-15-195-8018
Mounting Bracket

151958018
377473: RNCC: 3 | RNVC: 2
(241)AJ611377473: RNCC: 5 | RNVC: 2

16 May 2011

5340-15-066-0700
Retaining Strap

150660700
1383391: RNCC: 3 | RNVC: 2
1383391: RNCC: 5 | RNVC: 9

8 May 1985

5340-15-204-8180
Loop Clamp

152048180
10131: RNCC: 3 | RNVC: 2
(241)A101110131: RNCC: 5 | RNVC: 2

11 Jan 2012

5340-15-116-4803
Angle Bracket

151164803
60165656: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-205-4787
Retaining Band

152054787
L65891514: RNCC: 3 | RNVC: 2
(241)A0302L65891514: RNCC: 5 | RNVC: 2

14 Mar 2012

5340-15-003-7281
Flush Lock

150037281
46766575: RNCC: 3 | RNVC: 2
(241)A293046766575: RNCC: 5 | RNVC: 2

19 Nov 2013

5340-15-101-8531
Lock-Release Lever

151018531
808-86445-31: RNCC: 3 | RNVC: 2

23 Dec 1987

5340-15-187-1422
Loop Clamp

151871422
3630.113: RNCC: 3 | RNVC: 2
3630.113: RNCC: 5 | RNVC: 2
ED003630.1130-S: RNCC: 5 | RNVC: 2
3630-113: RNCC: 5 | RNVC: 2
3630.113: RNCC: 5 | RNVC: 2
3630113: RNCC: 5 | RNVC: 2
0036301130: RNCC: 5 | RNVC: 2
3630 113: RNCC: 5 | RNVC: 2

19 Feb 2009

5340-15-118-2649
Loop Clamp

151182649
D0485401: RNCC: 3 | RNVC: 2

11 Apr 1995

5340-15-002-2763
Mounting Bracket

150022763
504380631: RNCC: 3 | RNVC: 2

2 Aug 2013

5340-15-200-3861
Butt Hinge

152003861
25158079: RNCC: 3 | RNVC: 2

8 Jan 2006

5340-15-188-7839
Filler Opening Cap

151887839
TCAR 1080 C80: RNCC: 3 | RNVC: 2

17 Nov 2009

5340-15-101-8762
Plain Solid Disk

151018762
DPG00400-2: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-004-3863
Retaining Strap

150043863
0-35300: RNCC: 3 | RNVC: 2

7 Sep 1977

5340-15-204-0277
Spring Window Bolt

152040277
71485250: RNCC: 3 | RNVC: 2

19 Aug 2011

5340-15-149-3152
Loop Clamp

151493152
4886113: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-153-6883
Loop Clamp

151536883
142068035: RNCC: 3 | RNVC: 2

20 Feb 2001

5340-15-179-7335
Loop Clamp

151797335
500391414: RNCC: 3 | RNVC: 2
(241)A4249500391414: RNCC: 5 | RNVC: 2

7 Jun 2007

5340-15-000-1227
Handle Grip

150001227
55347240: RNCC: 3 | RNVC: 2

30 Jan 2013

5340-15-155-7664
Protection Bellows

151557664
550333274000: RNCC: 3 | RNVC: 2

25 Jun 2002

5340-15-178-5216
Webbing Strap

151785216
629-989: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-007-2607
Retaining Strap

150072607
1387248: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-148-4562
Retaining Strap

151484562
5006304040: RNCC: 3 | RNVC: 2

11 Aug 1998

5340-15-116-2081
Screw Thread Insert

151162081
122509136: RNCC: 3 | RNVC: 2

25 Mar 1993

5340-15-118-6613
Retaining Strap

151186613
73125890: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-076-1890
Rod End Clevis

150761890
M01363: RNCC: 3 | RNVC: 2
M0-1363: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-063-2832
Retaining Strap

150632832
60110291: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-117-9599
Angle Bracket

151179599
78970F01: RNCC: 3 | RNVC: 2
78970F01: RNCC: 5 | RNVC: 9

21 Mar 1996

5340-15-199-2104
Stand Base

151992104
161303107: RNCC: 3 | RNVC: 2
(241)A0199161303107: RNCC: 3 | RNVC: 2

7 Feb 2005

5340-15-110-7865
Mending Plate

151107865
60132458: RNCC: 3 | RNVC: 2

30 Apr 1988

5340-15-177-4020
Access Cover

151774020
041438: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-198-7929
Catch Strike

151987929
60188621: RNCC: 3 | RNVC: 2

17 Nov 2004

5340-15-117-9605
Mending Plate

151179605
78964F02: RNCC: 3 | RNVC: 2
78964F02: RNCC: 3 | RNVC: 2
78964F02: RNCC: 5 | RNVC: 9

21 Mar 1996

5340-15-179-7357
Mounting Bracket

151797357
504068418: RNCC: 3 | RNVC: 2
(241)A4249504068418: RNCC: 5 | RNVC: 2

7 Jun 2007

5340-15-118-2014
Loop Clamp

151182014
17316690: RNCC: 3 | RNVC: 2

22 Apr 1994

5340-15-073-8761
Rim Lock

150738761
39B100X70: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-003-0860
Mounting Plate

150030860
182708372: RNCC: 3 | RNVC: 2
(241)A0199182708372: RNCC: 5 | RNVC: 2

25 Oct 2013

5340-15-180-6992
Padlock

151806992
3802440: RNCC: 3 | RNVC: 2
(241)A39603802440: RNCC: 5 | RNVC: 2

4 Jul 2008

5340-15-181-2912
Access Cover

151812912
PAAE055938: RNCC: 3 | RNVC: 2

25 Nov 2008

5340-15-007-9372
Mending Plate

150079372
4448970: RNCC: 3 | RNVC: 2
4448970: RNCC: 5 | RNVC: 9

1 Mar 1980

5340-15-120-2165
Leather Strap

151202165
942038945/LRT: RNCC: 3 | RNVC: 2
942038945: RNCC: 5 | RNVC: 2
942038945: RNCC: 5 | RNVC: 9

23 Feb 1995

5340-15-203-1540
Latch Bar

152031540
212-1300-90-101: RNCC: 3 | RNVC: 2

27 Nov 2007

5340-15-187-7533
Access Door Hinge

151877533
J04840385-001: RNCC: 3 | RNVC: 2
(241)A0019J04840385-001: RNCC: 5 | RNVC: 2

5 May 2009

5340-15-178-4365
Mounting Plate

151784365
109-0326-26-103A1: RNCC: 3 | RNVC: 2

31 May 2005

5340-15-188-7656
Drift Bolt

151887656
MOR35365120CH: RNCC: 3 | RNVC: 2
(241)AG622MOR35365120CH: RNCC: 5 | RNVC: 2

13 Nov 2009

5340-15-007-2504
Retaining Strap

150072504
1370604: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-206-2614
Bridge Clamp

152062614
504055337: RNCC: 3 | RNVC: 2

1 Jun 2012

5340-15-163-3731
Mounting Bracket

151633731
94345769: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-155-6567
Mounting Bracket

151556567
0550142: RNCC: 3 | RNVC: 2
(241)A97720550142: RNCC: 8 | RNVC: 2

14 May 2002

5340-15-153-2741
Stand Base

151532741
122649201: RNCC: 2 | RNVC: 3

12 Dec 2000

5340-15-068-4890
Plain Solid Disk

150684890
2882-30: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-153-6879
Loop Clamp

151536879
142068031: RNCC: 1 | RNVC: 3

20 Feb 2001

5340-15-118-9502
Loop Clamp

151189502
75204397: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-150-1031
Mounting Bracket

151501031
120013646: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-122-5917
Screw Thread Insert

151225917
A0410095098: RNCC: 5 | RNVC: 2
A0410095098: RNCC: 5 | RNVC: 9
A0410095098: RNCC: 5 | RNVC: 9

10 Sep 1996

5340-15-126-7802
Handle Grip

151267802
0239-20: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-117-8828
Angle Bracket

151178828
NSOA537-15-C2: RNCC: 3 | RNVC: 2
NSOA537-15-C2: RNCC: 5 | RNVC: 9

28 Jan 1994

5340-15-134-6373
Handle Grip

151346373
2741-18: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-009-7405
Lock-Release Lever

150097405
1236-22-103: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-121-9182
Angle Bracket

151219182
60163005: RNCC: 3 | RNVC: 2

29 Mar 1996

5340-15-120-3288
Angle Bracket

151203288
98480280: RNCC: 3 | RNVC: 2

30 Mar 1995

5340-15-061-3746
Mending Plate

150613746
P26CA95: RNCC: 5 | RNVC: 2
P26CA95: RNCC: 5 | RNVC: 9

22 Sep 1977

5340-15-003-8972
Mounting Plate

150038972
182741073: RNCC: 3 | RNVC: 2
(241)A0199182741073: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-054-2542
Loop Clamp

150542542
7-5769-201-48446: RNCC: 3 | RNVC: 2

13 May 1971

5340-15-112-6825
Filler Opening Cap

151126825
T.240-1"1/4: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-063-5644
Access Door Hinge

150635644
V1219: RNCC: 3 | RNVC: 2

31 Mar 1983

5340-15-186-9054
Mounting Plate

151869054
137299: RNCC: 3 | RNVC: 2
0028380: RNCC: 5 | RNVC: 2

5 Jan 2009

5340-15-193-4390
Expansion Shield

151934390
504099037: RNCC: 3 | RNVC: 2
(241)A4249504099037: RNCC: 5 | RNVC: 2

13 May 2010

5340-15-164-2639
Angle Bracket

151642639
42052991: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-007-8930
Retaining Strap

150078930
4582246: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-116-5511
Protection Bellows

151165511
DIA200: RNCC: 3 | RNVC: 2

25 Oct 1993

5340-15-166-5225
Angle Bracket

151665225
73833010: RNCC: 3 | RNVC: 2
73833010: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-111-3787
Strap Hinge

151113787
113A6012-001: RNCC: 3 | RNVC: 2

7 Sep 1990

5340-15-042-6172
Handle Grip

150426172
9075-040: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-003-8992
Control Rod

150038992
182741251: RNCC: 3 | RNVC: 2
(241)A0199182741251: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-201-4019
Access Cover

152014019
928-0442/01: RNCC: 3 | RNVC: 2
(241)A4582928-0442/01: RNCC: 5 | RNVC: 2

8 Aug 2006

5340-15-104-4356
Expansion Plug

151044356
10158501: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-118-8601
Access Cover

151188601
299707149G: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-102-5576
Retaining Strap

151025576
204659: RNCC: 3 | RNVC: 2

16 Feb 1993

5340-15-103-0717
Angle Bracket

151030717
DE160.02.142: RNCC: 3 | RNVC: 2
(241)A5015DE160.02.142: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-122-0099
Flush Catch

151220099
60177112: RNCC: 3 | RNVC: 2

10 Apr 1996

5340-15-009-6586
Screw Thread Insert

150096586
529N1010304: RNCC: 3 | RNVC: 2
529N1010304: RNCC: 5 | RNVC: 9

1 Oct 1980

5340-15-146-7131
Rod End Clevis

151467131
157606712: RNCC: 3 | RNVC: 2

2 Jul 2001

5340-15-003-9120
Mounting Plate

150039120
182741324: RNCC: 3 | RNVC: 2
(241)A0199182741324: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-112-3496
Angle Bracket

151123496
60147081: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-112-3437
Plug Button

151123437
14674080: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-109-1259
Retaining Band

151091259
8963830: RNCC: 3 | RNVC: 2

30 Apr 1988

5340-15-149-8215
Mounting Plate

151498215
130148: RNCC: 3 | RNVC: 2
0052651: RNCC: 5 | RNVC: 2

2 Jun 1999

5340-15-119-1481
Bow Handle

151191481
73125995: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-054-8980
Angle Bracket

150548980
H1EH43: RNCC: 5 | RNVC: 2
H1EH43: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-189-1327
Loop Clamp

151891327
18089292: RNCC: 3 | RNVC: 2
(241)A424918089292: RNCC: 5 | RNVC: 2

28 Jan 2010

5340-15-065-4118
Bow Handle

150654118
152715: RNCC: 3 | RNVC: 2

5 May 1984

5340-15-178-4829
Access Cover

151784829
500319459: RNCC: 3 | RNVC: 2
A063000-020: RNCC: 5 | RNVC: 2

1 Jul 2005

5340-15-117-4000
Handle Grip

151174000
D0466372: RNCC: 3 | RNVC: 2

31 Mar 1994

5340-15-118-0883
Tubular Fairlead

151180883
D0582019: RNCC: 3 | RNVC: 2

20 Dec 1994

5340-15-102-8532
Butt Hinge Leaf

151028532
213A7189-001: RNCC: 3 | RNVC: 2

16 Dec 1988

5340-15-114-8260
Bail Handle

151148260
381-0018/01: RNCC: 3 | RNVC: 2

12 Aug 1992

5340-15-120-0695
Vent Plug

151200695
M04075/10: RNCC: 3 | RNVC: 2

15 Jun 1995

5340-15-162-4062
Loop Clamp

151624062
3617.075: RNCC: 3 | RNVC: 2

16 Aug 2001

5340-15-073-5256
Flush Lock

150735256
1104: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-118-3402
Loop Clamp

151183402
60142388: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-158-6416
Rod End Clevis

151586416
122606480: RNCC: 3 | RNVC: 2

12 Mar 2004

5340-15-054-8423
Retaining Strap

150548423
H17EF18: RNCC: 5 | RNVC: 2
H17EF18: RNCC: 5 | RNVC: 9

7 Oct 1981

5340-15-073-6612
Rim Lock Set

150736612
1776B1SPART34: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-178-5517
Loop Clamp

151785517
2009.090.0056: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-180-3295
Mechanical Stop

151803295
(241)A4249504118014: RNCC: 3 | RNVC: 2
504118014: RNCC: 3 | RNVC: 2

18 Apr 2008

5340-15-112-3509
Loop Clamp

151123509
10440790: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-063-7337
Plug Button

150637337
19.70.59.00: RNCC: 3 | RNVC: 2

30 May 1983

5340-15-118-8394
Mounting Bracket

151188394
9455862: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-122-2728
Mounting Bracket

151222728
800048875: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-111-2820
Access Cover

151112820
DOA099807: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-065-7270
Access Door Hinge

150657270
109-0360-15-1: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-15-008-1397
Catch Strike

150081397
A1-23276-001: RNCC: 3 | RNVC: 2
A1-23276-001: RNCC: 5 | RNVC: 9

22 Apr 1981

5340-15-150-0987
Mounting Bracket

151500987
1130109: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-061-4895
Retaining Strap

150614895
L5A5: RNCC: 5 | RNVC: 2
L5A5: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-177-6261
Access Cover

151776261
169888P1: RNCC: 3 | RNVC: 2

4 Jun 2004

5340-15-206-8326
Bridge Clamp

152068326
DV 2345-257: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-154-4044
Angle Bracket

151544044
A6120-91094-6: RNCC: 3 | RNVC: 2

22 May 2001

5340-15-112-8014
Rod End Clevis

151128014
344A5047-001: RNCC: 3 | RNVC: 2

27 Oct 1990

5340-15-157-4060
Mounting Bracket

151574060
STAFFA PLASMA: RNCC: 3 | RNVC: 2
(241)AD142STAFFAPLASMA: RNCC: 5 | RNVC: 2

7 Jul 2003

5340-15-151-5482
Mounting Bracket

151515482
980304: RNCC: 3 | RNVC: 2

7 Jun 2000

5340-15-065-0688
Handle Grip

150650688
65.60.30.00: RNCC: 3 | RNVC: 2

26 Dec 1983

5340-15-009-8864
Plain Solid Disk

150098864
1236-61-101: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-178-2973
Permanent Magnet

151782973
049627: RNCC: 3 | RNVC: 2

29 Apr 2005

5340-15-116-4771
Butt Hinge Leaf

151164771
60166436: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-153-4011
Bow Handle

151534011
5176-225-00: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-001-5670
Runner

150015670
19007002: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-152-3279
Loop Clamp

151523279
0-170461: RNCC: 3 | RNVC: 2
(241)A39630-170461: RNCC: 5 | RNVC: 2
1PA39630-170461: RNCC: 5 | RNVC: 2

31 Aug 2000

5340-15-005-0983
Angle Bracket

150050983
1137-05-143: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-149-7064
Access Cover

151497064
9CA1710A323-001: RNCC: 3 | RNVC: 2

7 May 1999

5340-15-157-5145
Mounting Bracket

151575145
300-4167/01: RNCC: 3 | RNVC: 2
(241)A0069300-4167/01: RNCC: 5 | RNVC: 2

11 Sep 2003

5340-15-177-4365
Mounting Bracket

151774365
051456: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-074-3931
Retaining Strap

150743931
B7UNAV1046A37UNI743CD: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-073-5253
Flush Lock

150735253
1101: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-008-0795
Retaining Strap

150080795
60113152: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-108-7234
Angle Bracket

151087234
60146816: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-109-3840
Mending Plate

151093840
5137-293-05: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-108-2186
Swivel Caster

151082186
0128156: RNCC: 3 | RNVC: 2

1 Sep 1989

5340-15-001-8426
Mounting Bracket

150018426
500432242: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-110-1995
Access Cover

151101995
DOR0112652: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-202-4483
Luggage Lock

152024483
1550/4: RNCC: 3 | RNVC: 2
(241)A52001550/4: RNCC: 5 | RNVC: 2

25 Mar 2007

5340-15-109-4613
Angle Bracket

151094613
1S 532152: RNCC: 3 | RNVC: 2
1S 532152: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-065-7279
Angle Bracket

150657279
109-0506-11-1: RNCC: 3 | RNVC: 2

16 Dec 1984

5340-15-178-3703
Access Cover

151783703
255402023: RNCC: 3 | RNVC: 2

29 Apr 2005

5340-15-157-6416
Block Clamp

151576416
AIT13901HH4490: RNCC: 3 | RNVC: 2

12 Oct 2003

5340-15-108-2959
Angle Bracket

151082959
60118922: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-193-1907
Bridge Clamp

151931907
3533143M1: RNCC: 3 | RNVC: 2
3533143M1: RNCC: 5 | RNVC: 2

20 Apr 2010

5340-15-157-5349
Loop Clamp

151575349
11222-18: RNCC: 2 | RNVC: 3

19 Sep 2003

5340-15-118-3653
Mending Plate

151183653
60142594: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-107-5133
Expansion Plug

151075133
7165935: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-122-2719
Mounting Plate

151222719
800048848: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-154-6530
Leather Strap

151546530
541-31-3610: RNCC: 2 | RNVC: 3
554131361000: RNCC: 2 | RNVC: 3

31 Jul 2001

5340-15-152-0019
Mending Plate

151520019
60139386: RNCC: 3 | RNVC: 2

31 Jul 2000

5340-15-112-3473
Retaining Strap

151123473
60146768: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-107-5134
Expansion Plug

151075134
8835008: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-178-6471
Mounting Plate

151786471
2231.081.0001: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-148-4390
Filler Opening Cap

151484390
300000002: RNCC: 3 | RNVC: 2

11 Aug 1998

5340-15-004-4207
Access Door Hinge

150044207
66324-101A1: RNCC: 3 | RNVC: 2

9 May 1978

5340-15-107-8765
Angle Bracket

151078765
60117171: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-111-8410
Mending Plate

151118410
50770200: RNCC: 3 | RNVC: 2
8193993: RNCC: 5 | RNVC: 2

14 Jun 1988

5340-15-115-0036
Access Cover

151150036
000203565100: RNCC: 5 | RNVC: 2
000203565100: RNCC: 5 | RNVC: 9

23 Oct 1992

5340-15-112-2181
Angle Bracket

151122181
8198165: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-155-5204
Dashpot Piston

151555204
(241)A5015DE004.03.170: RNCC: 3 | RNVC: 2
DE004.03.170: RNCC: 3 | RNVC: 2

8 Apr 2002

5340-15-108-7066
Retaining Band

151087066
4691495: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-009-2767
Mending Plate

150092767
191-0129-01: RNCC: 3 | RNVC: 2

2 Jan 1980

5340-15-156-9250
Support Hook

151569250
60182463: RNCC: 3 | RNVC: 2

11 Mar 2003

5340-15-178-7769
Mounting Plate

151787769
042025: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-116-3500
Catch Strike

151163500
802725017: RNCC: 3 | RNVC: 2

28 Apr 1993

5340-15-108-2770
Cushioning Pad

151082770
GA7: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-109-2005
Angle Bracket

151092005
60130084: RNCC: 3 | RNVC: 2

23 Feb 1989

5340-15-127-1055
Angle Bracket

151271055
399258: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-007-2190
Retaining Strap

150072190
1395932: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-195-8395
Mechanical Stop

151958395
DE160.04.568: RNCC: 3 | RNVC: 2
102605: RNCC: 3 | RNVC: 2
(241)A3593102605: RNCC: 5 | RNVC: 2

18 May 2011

5340-15-139-3824
Angle Bracket

151393824
42309180: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-061-1157
Angle Bracket

150611157
71-811-801: RNCC: 3 | RNVC: 2
71-811-801: RNCC: 5 | RNVC: 9

16 Apr 1978

5340-15-000-1898
Mounting Bracket

150001898
PLANO FLAT 63-15 23084: RNCC: 3 | RNVC: 2

7 Feb 2013

5340-15-089-5806
Butt Hinge

150895806
16956-125: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-158-3823
Block Clamp

151583823
52000080: RNCC: 3 | RNVC: 2

25 Jan 2004

5340-15-064-8075
Angle Bracket

150648075
60116646: RNCC: 3 | RNVC: 2

17 Nov 1983

5340-15-117-1344
Bridge Clamp

151171344
06200A111480: RNCC: 5 | RNVC: 2
06200A111480: RNCC: 5 | RNVC: 9

10 Aug 1993

5340-15-003-3807
Mounting Bracket

150033807
ED0085456540-S: RNCC: 3 | RNVC: 2

5 Nov 2013

5340-15-062-2738
Mending Plate

150622738
1141-31-122: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-154-1442
Angle Bracket

151541442
0-115117: RNCC: 3 | RNVC: 2
(241)A39630-115117: RNCC: 5 | RNVC: 2
1PA39630-115117: RNCC: 5 | RNVC: 2

22 Mar 2001

5340-15-109-1792
Retaining Strap

151091792
60105419: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-211-6563
Expansion Plug

152116563
TAPPOADESPANSIONEGRIGLIATO: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-000-1699
Butt Hinge

150001699
99UJ04543298S01-006: RNCC: 3 | RNVC: 2

4 Feb 2013

5340-15-153-6876
Loop Clamp

151536876
142068026: RNCC: 3 | RNVC: 2

20 Feb 2001

5340-15-179-6899
Blank Panel

151796899
0000500402379: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-073-5218
Rim Lock Set

150735218
1447BISPARTF: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-147-8738
Access Cover

151478738
129434: RNCC: 3 | RNVC: 2

18 May 1998

5340-15-118-9551
Expansion Plug

151189551
75204928: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-178-0432
Bail Handle

151780432
401623G1: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-15-005-3706
Loop Clamp

150053706
1-34170-08: RNCC: 3 | RNVC: 2
1-34170-08: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-068-4525
Lock-Release Lever

150684525
808-13231-18: RNCC: 3 | RNVC: 2

5 Mar 1986

5340-15-151-7278
Loop Clamp

151517278
0-108029: RNCC: 3 | RNVC: 2
(241)A39630-108029: RNCC: 5 | RNVC: 2
1PA39630-108029: RNCC: 5 | RNVC: 2

4 Jul 2000

5340-15-149-7727
Screw Thread Insert

151497727
5569-00: RNCC: 3 | RNVC: 2

22 Jun 1999

5340-15-177-4206
Mounting Plate

151774206
048049: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-195-7996
Mounting Bracket

151957996
150901: RNCC: 3 | RNVC: 2
(241)AJ611150901: RNCC: 5 | RNVC: 2

16 May 2011

5340-15-001-3365
Retaining Band

150013365
504380834: RNCC: 3 | RNVC: 2

17 Jun 2013

5340-15-005-3561
Loop Clamp

150053561
1-04411-90: RNCC: 3 | RNVC: 2
1-04411-90: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-060-6396
Detent Plunger

150606396
27021-101: RNCC: 3 | RNVC: 2

28 Jun 1977

5340-15-002-5274
Butt Hinge

150025274
504238708: RNCC: 3 | RNVC: 2

2 Sep 2013

5340-15-194-8515
Rod End Clevis

151948515
P3840: RNCC: 3 | RNVC: 2

25 Jan 2011

5340-15-113-9681
Padlock Eye

151139681
216A1119-001: RNCC: 3 | RNVC: 2

31 Mar 1992

5340-15-149-3154
Retaining Strap

151493154
4886120: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-197-1752
Rim Lock Set

151971752
PN UAS 00040403: RNCC: 3 | RNVC: 2
5340F76034410: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-073-5223
Rim Lock

150735223
71447BISPARTR: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-194-6068
Access Cover

151946068
42557444: RNCC: 3 | RNVC: 2

14 Dec 2010

5340-15-147-9057
Access Cover

151479057
50342-001: RNCC: 5 | RNVC: 2
50342-001: RNCC: 5 | RNVC: 9

18 May 1998

5340-15-056-0011
Expansion Plug

150560011
38UNI1663C7-3145: RNCC: 2 | RNVC: 2
2300-23-314: RNCC: 5 | RNVC: 2
230023314: RNCC: 5 | RNVC: 2

26 Jun 1978

5340-15-171-0704
Coat And Hat Hook

151710704
ATTACCAPANNI: RNCC: 1 | RNVC: 2

1 Jun 2003

5340-15-045-3638
Retaining Strap

150453638
753-12-19: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-102-8533
Butt Hinge Leaf

151028533
213A7188-001: RNCC: 3 | RNVC: 2

16 Dec 1988

5340-15-149-4655
Webbing Strap

151494655
1087.005: RNCC: 3 | RNVC: 2

17 Mar 1999

5340-15-114-2456
Plain Solid Disk

151142456
15001: RNCC: 3 | RNVC: 2

30 Nov 1993

5340-15-178-7803
Mounting Plate

151787803
026724: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-131-7581
Retaining Band

151317581
M2182A: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-204-1232
Mounting Bracket

152041232
350.14.01.004: RNCC: 3 | RNVC: 2

7 Sep 2011

5340-15-051-1396
Handle Grip

150511396
8804-3: RNCC: 3 | RNVC: 2
8804-3: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-117-7056
Retaining Strap

151177056
D9103027P: RNCC: 3 | RNVC: 2
D9103027P: RNCC: 5 | RNVC: 9

9 Jan 1995

5340-15-178-4681
Angle Bracket

151784681
DYA059: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-007-2042
Angle Bracket

150072042
1393130: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-009-0696
Rod End Clevis

150090696
8273542: RNCC: 3 | RNVC: 2

27 Aug 1979

5340-15-180-3169
Protection Bellows

151803169
504089883: RNCC: 3 | RNVC: 2
(241)A4249504089883: RNCC: 3 | RNVC: 2

18 Apr 2008

5340-15-119-7940
Rod End Clevis

151197940
73124473: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-180-3656
Access Cover

151803656
2600684: RNCC: 3 | RNVC: 2
2600684: RNCC: 5 | RNVC: 2

29 Apr 2008

5340-15-103-0125
Catch Strike

151030125
587643: RNCC: 3 | RNVC: 2

21 Jun 1987

5340-15-004-1803
Angle Bracket

150041803
945001: RNCC: 3 | RNVC: 2

19 Apr 1978

5340-15-109-4829
Vent Plug

151094829
518899: RNCC: 2 | RNVC: 2
1P 518899: RNCC: 3 | RNVC: 2
518899: RNCC: 5 | RNVC: 9
1P 518899: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-007-1820
Angle Bracket

150071820
1393756: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-064-8469
Retaining Strap

150648469
000202987500: RNCC: 5 | RNVC: 2
000202987500: RNCC: 5 | RNVC: 9

16 Nov 1984

5340-15-178-6369
Mounting Plate

151786369
2900.257.0007: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-188-9542
Mending Plate

151889542
504336734: RNCC: 3 | RNVC: 2

5 Jan 2010

5340-15-128-3481
Handle Grip

151283481
9290: RNCC: 3 | RNVC: 2
9290: RNCC: 5 | RNVC: 9

9 Oct 1996

5340-15-101-0244
Leather Strap

151010244
888200133: RNCC: 3 | RNVC: 2

22 Apr 1987

5340-15-118-4462
Mending Plate

151184462
60152193: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-001-7965
Mounting Bracket

150017965
5949784712: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-118-4591
Mending Plate

151184591
60153245: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-001-5743
Access Cover

150015743
PDCHC2150000: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-001-5875
Door Handle

150015875
5801398477: RNCC: 3 | RNVC: 2
(241)A42495801398477: RNCC: 5 | RNVC: 2

12 Jul 2013

5340-15-055-5665
Screw Thread Insert

150555665
35-59: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-180-0315
Plug Button

151800315
14508287: RNCC: 3 | RNVC: 2

16 Nov 2007

5340-15-162-4105
Plug Button

151624105
9080.140: RNCC: 3 | RNVC: 2

16 Aug 2001

5340-15-005-1923
Rod End Clevis

150051923
1379828: RNCC: 3 | RNVC: 2
1379828: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-113-8613
Retaining Strap

151138613
D9104097P: RNCC: 3 | RNVC: 2
D9104097P: RNCC: 5 | RNVC: 9

13 Jun 1994

5340-15-107-5065
Spring Tension Clip

151075065
4389939: RNCC: 3 | RNVC: 2
(7001)5340151075065: RNCC: 5 | RNVC: 2
(241)AF9084389939: RNCC: 5 | RNVC: 2
4389939: RNCC: 5 | RNVC: 2
(241)A42494389939: RNCC: 5 | RNVC: 2

30 Mar 1988

5340-15-117-1951
Angle Bracket

151171951
190514126: RNCC: 3 | RNVC: 2

2 Sep 1993

5340-15-103-0974
Door Handle

151030974
DE013.13.374: RNCC: 3 | RNVC: 2
(241)A5015DE013.13.374: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-119-1398
Access Cover

151191398
73125364: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-118-8261
Access Cover

151188261
9448963: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-149-3095
Mending Plate

151493095
4885868: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-113-2790
Retaining Strap

151132790
06592-101B00: RNCC: 3 | RNVC: 2

30 May 1991

5340-15-118-7525
Protection Bellows

151187525
9434284: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-178-4695
Angle Bracket

151784695
DYA000: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-064-5909
Retaining Strap

150645909
4775923: RNCC: 3 | RNVC: 2

17 Nov 1983

5340-15-119-5572
Retaining Strap

151195572
4825501: RNCC: 3 | RNVC: 2

19 Sep 1994

5340-15-120-3568
Access Cover

151203568
60175319: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-120-9909
Door Handle

151209909
217510469: RNCC: 3 | RNVC: 2

5 Sep 1995

5340-15-007-6957
Mending Plate

150076957
1141-39-906: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-063-2858
Retaining Strap

150632858
60111052: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-105-8971
Spring Tension Clip

151058971
14184070: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-065-5098
Mending Plate

150655098
32-02-331: RNCC: 3 | RNVC: 2

29 Jan 1985

5340-15-121-3937
Access Cover

151213937
4614886: RNCC: 3 | RNVC: 2

11 Dec 1995

5340-15-178-5527
Mounting Plate

151785527
2231.012.0002: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-120-2472
Expansion Plug

151202472
60144938: RNCC: 3 | RNVC: 2

6 Mar 1995

5340-15-152-1341
Mending Plate

151521341
99473678: RNCC: 3 | RNVC: 2

7 Aug 2000

5340-15-128-2322
Handle Grip

151282322
DB650: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-051-3724
Retaining Ring

150513724
9913191: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-109-8675
Retaining Strap

151098675
6013443: RNCC: 3 | RNVC: 2
60134443: RNCC: 3 | RNVC: 2

15 Oct 1988

5340-15-003-1356
Angle Bracket

150031356
5949791841: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-118-8074
Access Cover

151188074
9287056: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-154-4907
Rod End Connector

151544907
A1000669: RNCC: 3 | RNVC: 2

20 Jun 2001

5340-15-063-3188
Retaining Strap

150633188
60104849: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-118-3651
Mending Plate

151183651
60142927: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-001-8125
Metal Grille

150018125
500437621: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-008-0705
Angle Bracket

150080705
1393759: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-118-4548
Retaining Strap

151184548
60155699: RNCC: 3 | RNVC: 2

1 Jun 1994

Load More Results