What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 12 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 12 of 72

5340-15-109-2830
Angle Bracket

151092830
377A2121-003: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-009-2481
Angle Bracket

150092481
P-882743-001: RNCC: 3 | RNVC: 2
P882743-001: RNCC: 5 | RNVC: 2

2 Sep 1980

5340-15-004-7623
Retaining Strap

150047623
68162-101: RNCC: 3 | RNVC: 2

10 Apr 1978

5340-15-152-6344
Access Cover

151526344
9462001400: RNCC: 3 | RNVC: 2

4 Oct 2000

5340-15-149-3037
Angle Bracket

151493037
4885390: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-131-9397
Angle Bracket

151319397
19509-01-6-229: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-057-8983
Angle Bracket

150578983
P44HA84: RNCC: 5 | RNVC: 2
P44HA84: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-120-0940
Bow Handle

151200940
60174160: RNCC: 3 | RNVC: 2

19 Dec 1994

5340-15-118-4492
Angle Bracket

151184492
60154192: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-118-8400
Access Cover

151188400
9460564: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-118-6534
Expansion Plug

151186534
70921191: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-063-0602
Mending Plate

150630602
0-100276: RNCC: 3 | RNVC: 2

30 Apr 1982

5340-15-157-6325
Retaining Bail

151576325
11030306: RNCC: 3 | RNVC: 2
(241)A977211030306: RNCC: 5 | RNVC: 2

9 Oct 2003

5340-15-178-6453
Access Cover

151786453
29875288: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-107-5061
Loop Clamp

151075061
60178220: RNCC: 3 | RNVC: 2
60178229: RNCC: 3 | RNVC: 2
8588210: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-119-4020
Angle Bracket

151194020
60172413: RNCC: 3 | RNVC: 2

25 Jul 1994

5340-15-059-2681
Loop Clamp

150592681
NS4F011-4A: RNCC: 3 | RNVC: 2
NS4F011-4A: RNCC: 5 | RNVC: 9

18 Nov 1975

5340-15-074-3989
Retaining Strap

150743989
28UNI2136: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-139-7569
Spring Tension Clip

151397569
0009890: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-179-8960
Access Cover

151798960
D1402503: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-179-8707
Mounting Bracket

151798707
ART.165: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-112-6770
Access Cover

151126770
MC245-5-151/E: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-116-2666
Angle Bracket

151162666
190520157: RNCC: 3 | RNVC: 2

15 Apr 1993

5340-15-109-4507
Plain Solid Disk

151094507
1P 541187LA: RNCC: 3 | RNVC: 2
1P 541187LA: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-103-1111
Leather Strap

151031111
DE013.13.371: RNCC: 3 | RNVC: 2
(241)A5015DE013.13.371: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-160-5255
Coat And Hat Hook

151605255
F720109801: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-152-2314
Mending Plate

151522314
60117958: RNCC: 3 | RNVC: 2

10 Aug 2000

5340-15-178-6521
Mounting Plate

151786521
2231.061.0003: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-199-6681
Protection Bellows

151996681
93193159: RNCC: 3 | RNVC: 2
(241)A424993193159: RNCC: 5 | RNVC: 2

17 May 2005

5340-15-105-8981
Spring Tension Clip

151058981
10124775: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-188-9914
Permanent Magnet

151889914
M340FPGBOB00: RNCC: 3 | RNVC: 2

13 Jan 2010

5340-15-118-2623
Vent Plug

151182623
D0485537: RNCC: 3 | RNVC: 2

11 Apr 1995

5340-15-157-0618
Hook Handle

151570618
DIS.629 MARINARSEN SP: RNCC: 3 | RNVC: 2

28 Apr 2003

5340-15-132-0092
Angle Bracket

151320092
4610928: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-114-4416
Expansion Plug

151144416
14327401: RNCC: 3 | RNVC: 2

12 Jun 1992

5340-15-174-7056
Mounting Bracket

151747056
191640: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-179-7360
Loop Clamp

151797360
17316392: RNCC: 3 | RNVC: 2
(241)A424917316392: RNCC: 5 | RNVC: 2

7 Jun 2007

5340-15-007-2397
Retaining Strap

150072397
1398417: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-007-0529
Retaining Strap

150070529
000202585400: RNCC: 5 | RNVC: 2
000202585400: RNCC: 5 | RNVC: 9

1 Jun 1987

5340-15-007-2044
Angle Bracket

150072044
1380456: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-002-8091
Mounting Bracket

150028091
504360332: RNCC: 3 | RNVC: 2

3 Oct 2013

5340-15-006-4241
Angle Bracket

150064241
4972730: RNCC: 3 | RNVC: 2

26 Mar 1979

5340-15-178-9223
Mounting Plate

151789223
PA020MD002AA00: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-15-179-3327
Retaining Strap

151793327
313705F01: RNCC: 3 | RNVC: 2

28 Nov 2006

5340-15-119-1482
Retaining Strap

151191482
73126076: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-109-3087
Expansion Plug

151093087
60110078: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-131-9924
Angle Bracket

151319924
4018102: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-151-9990
Angle Bracket

151519990
60117147: RNCC: 3 | RNVC: 2

31 Jul 2000

5340-15-112-8489
Vent Plug

151128489
467705: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-122-0606
Mounting Bracket

151220606
201CA360-1TR: RNCC: 3 | RNVC: 2

23 Apr 1996

5340-15-194-3841
Mounting Bracket

151943841
109-B700-35-281: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-15-100-1782
Spring Holder

151001782
88331-30A: RNCC: 3 | RNVC: 2

28 Sep 1985

5340-15-179-6766
Latch Bar

151796766
0000500408272: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-147-3244
Protection Bellows

151473244
3S0F135250: RNCC: 3 | RNVC: 2

31 Oct 1997

5340-15-179-7691
Mounting Plate

151797691
GW34863: RNCC: 3 | RNVC: 2

3 Aug 2007

5340-15-063-5961
Retaining Strap

150635961
5941003: RNCC: 3 | RNVC: 2
5941003: RNCC: 5 | RNVC: 9

13 Nov 1982

5340-15-187-3401
Mechanical Stop

151873401
041248: RNCC: 3 | RNVC: 2
(241)A3593041248: RNCC: 5 | RNVC: 2

17 Mar 2009

5340-15-156-8799
Loop Clamp

151568799
1470-124 5451: RNCC: 3 | RNVC: 2

10 Mar 2003

5340-15-065-7286
Rod End Clevis

150657286
109-0503-22-3: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-15-118-4015
Angle Bracket

151184015
60159111: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-063-3742
Retaining Strap

150633742
60113269: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-152-6802
Handle Grip

151526802
127/75+X: RNCC: 3 | RNVC: 2
4B90202600: RNCC: 5 | RNVC: 2

10 Oct 2000

5340-15-120-7094
Bow Handle

151207094
555-42-0160: RNCC: 3 | RNVC: 2
555542016000: RNCC: 3 | RNVC: 2

27 Jan 2004

5340-15-059-3089
Plain Solid Disk

150593089
12-15-07-00: RNCC: 3 | RNVC: 2

10 Apr 1975

5340-15-001-1391
Cane Bolt

150011391
9438115: RNCC: 3 | RNVC: 2

31 May 2013

5340-15-186-9155
Loop Clamp

151869155
375182: RNCC: 3 | RNVC: 2
375182: RNCC: 5 | RNVC: 9

5 Jan 2009

5340-15-180-0306
Angle Bracket

151800306
109-0321-44-223: RNCC: 3 | RNVC: 2

16 Nov 2007

5340-15-127-6979
Handle Grip

151276979
5420-45: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-007-5309
Mending Plate

150075309
1139-03-108: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-007-3341
Lock-Release Lever

150073341
1376-23-269: RNCC: 3 | RNVC: 2
137623269: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-122-6230
Plug Button

151226230
999-5001-10-133: RNCC: 3 | RNVC: 2

27 Sep 1996

5340-15-117-1972
Leather Strap

151171972
190509224: RNCC: 3 | RNVC: 2

2 Sep 1993

5340-15-059-3928
Screw Thread Insert

150593928
2140-06-303: RNCC: 3 | RNVC: 2
214006303: RNCC: 5 | RNVC: 2

26 Jun 1978

5340-15-102-8529
Butt Hinge Leaf

151028529
213A7193-001: RNCC: 3 | RNVC: 2

16 Dec 1988

5340-15-105-2825
Screw Thread Insert

151052825
276-1970-73: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-068-9702
Hand Crank

150689702
533-50-0140: RNCC: 3 | RNVC: 2

9 Jun 1986

5340-15-051-3161
Loop Clamp

150513161
1-04182-05: RNCC: 3 | RNVC: 2
10418205: RNCC: 5 | RNVC: 2
717660: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-120-2716
Butt Hinge Leaf

151202716
60166016: RNCC: 3 | RNVC: 2

9 Mar 1995

5340-15-052-0375
Loop Clamp

150520375
M781-20-75-09: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-073-5268
Flush Lock

150735268
75-70X58: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-063-3298
Loop Clamp

150633298
1/01156/00: RNCC: 3 | RNVC: 2
10115600: RNCC: 5 | RNVC: 2

15 Oct 1982

5340-15-150-0807
Loop Clamp

151500807
9815670-18: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-100-8093
Butt Hinge Leaf

151008093
109-0640-50-139: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-15-109-8268
Handle Grip

151098268
68-500019-049: RNCC: 3 | RNVC: 2

21 Mar 1990

5340-15-180-4283
Access Cover

151804283
212-1125-33-1: RNCC: 3 | RNVC: 2
(241)A0126212-1125-33-1: RNCC: 5 | RNVC: 2

20 May 2008

5340-15-203-2425
Caster Wheel

152032425
32HJ04543413S01-801-037N: RNCC: 3 | RNVC: 2

10 Dec 2007

5340-15-113-2789
Retaining Strap

151132789
13888-001B1: RNCC: 3 | RNVC: 2
13888-001B1: RNCC: 5 | RNVC: 9

30 May 1991

5340-15-001-0402
Mounting Bracket

150010402
219AE3169-121: RNCC: 3 | RNVC: 2

21 May 2013

5340-15-001-0718
Mounting Bracket

150010718
CARFOLI MVS-B46: RNCC: 3 | RNVC: 2
AMCCARFOLIMVSB46: RNCC: 5 | RNVC: 2

27 May 2013

5340-15-055-6370
Rim Lock

150556370
1971TAV01MSENSP: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-001-5705
Access Cover

150015705
SGMSGHCCH000: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-204-8869
Bow Handle

152048869
2-B7609.0000//D: RNCC: 3 | RNVC: 2
(241)A00692-B7609.0000//D: RNCC: 5 | RNVC: 2

23 Jan 2012

5340-15-205-0900
Mounting Bracket

152050900
341E: RNCC: 3 | RNVC: 2
(241)A2668341E: RNCC: 5 | RNVC: 2

17 Feb 2012

5340-15-001-0303
Casement Fastener

150010303
504375954: RNCC: 3 | RNVC: 2

15 May 2013

5340-15-206-3006
Catch Strike

152063006
071917451: RNCC: 3 | RNVC: 2

1 Jun 2012

5340-15-102-8067
Butt Hinge

151028067
211A7122-401: RNCC: 3 | RNVC: 2

27 Oct 1988

5340-15-197-1748
Rim Lock Set

151971748
PN UAS 00037780: RNCC: 3 | RNVC: 2
5340F76032407: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-119-1307
Access Cover

151191307
73123509: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-153-9889
Elastic Strap

151539889
4713050100: RNCC: 3 | RNVC: 2

14 Mar 2001

5340-15-145-0713
Loop Clamp

151450713
18088292: RNCC: 3 | RNVC: 2
(241)A424918088292: RNCC: 5 | RNVC: 2

15 Apr 1997

5340-15-001-7292
Retaining Band

150017292
187-0456: RNCC: 3 | RNVC: 2

15 Jul 2013

5340-15-005-0982
Rod End Clevis

150050982
1137-03-108: RNCC: 3 | RNVC: 2

10 Apr 1978

5340-15-157-9757
Support Hook

151579757
J92740402-003: RNCC: 3 | RNVC: 2

14 Dec 2003

5340-15-188-9826
Access Cover

151889826
129-0371-56-129: RNCC: 3 | RNVC: 2
(241)A0126129-0371-56-129: RNCC: 5 | RNVC: 2

12 Jan 2010

5340-15-153-5189
Access Cover

151535189
142018119: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-040-2587
Lever Bracket

150402587
2-6339-101-26621-1: RNCC: 3 | RNVC: 2
2-6339-1-01-26621-1: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-179-6872
Block Clamp

151796872
00164549: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-060-9475
Mending Plate

150609475
F302A6F2: RNCC: 3 | RNVC: 2

20 May 1977

5340-15-060-5687
Mending Plate

150605687
27242-101: RNCC: 3 | RNVC: 2

1 Jun 1977

5340-15-151-7355
Angle Bracket

151517355
0-179215: RNCC: 3 | RNVC: 2

4 Jul 2000

5340-15-006-8889
Loop Clamp

150068889
N0R2-505-05-25A: RNCC: 3 | RNVC: 2

30 May 1980

5340-15-060-4913
Retaining Band

150604913
204-9000-15-2: RNCC: 3 | RNVC: 2

15 May 1977

5340-15-007-5011
Lock-Release Lever

150075011
1139-02-112: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-180-4554
Padlock

151804554
004516003W: RNCC: 3 | RNVC: 2
(241)A424942556474: RNCC: 5 | RNVC: 2
42556474: RNCC: 5 | RNVC: 2

27 May 2008

5340-15-020-1994
Leather Strap

150201994
02-231E03-36: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-153-7229
Bow Handle

151537229
142025194: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-201-9765
Catch Strike

152019765
79114659: RNCC: 3 | RNVC: 2
(241)AD75179114659: RNCC: 5 | RNVC: 2
79114659: RNCC: 5 | RNVC: 2

17 Jan 2007

5340-15-116-4806
Angle Bracket

151164806
60166093: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-114-7768
Retaining Strap

151147768
629.3617.102: RNCC: 3 | RNVC: 2

4 Aug 1992

5340-15-197-2108
Expansion Shield

151972108
PN UAS 00047177: RNCC: 3 | RNVC: 2
5930F76037918: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-111-7990
Angle Bracket

151117990
031330/7: RNCC: 3 | RNVC: 2

1 Jul 1990

5340-15-157-5167
Angle Bracket

151575167
212-061-902-1181: RNCC: 3 | RNVC: 2

12 Sep 2003

5340-15-187-5602
Bow Handle

151875602
TAF-0058/01: RNCC: 3 | RNVC: 2

9 Apr 2009

5340-15-210-0066
Angle Bracket

152100066
EX7125RI2017062: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-074-3975
Retaining Strap

150743975
4UNI2136CD: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-108-7070
Loop Clamp

151087070
12177490: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-001-7891
Mounting Bracket

150017891
5949788862: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-151-7354
Angle Bracket

151517354
0-176147: RNCC: 3 | RNVC: 2

4 Jul 2000

5340-15-205-2615
Threaded Rod End

152052615
504378627: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-051-0827
Handle Grip

150510827
23531: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-001-5937
Retaining Bail

150015937
17315192: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-203-4591
Mounting Bracket

152034591
1090/817: RNCC: 3 | RNVC: 2
1090/817: RNCC: 5 | RNVC: 2
(241)AG5901090/817: RNCC: 5 | RNVC: 2

4 Feb 2008

5340-15-111-3450
Rod End Clevis

151113450
109-0030-25-1: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-15-004-2846
Plain Solid Disk

150042846
5AC25321-1: RNCC: 3 | RNVC: 2

13 Sep 1977

5340-15-156-6004
Mounting Bracket

151566004
4927164: RNCC: 3 | RNVC: 2

3 Mar 2003

5340-15-109-9577
Retaining Strap

151099577
10291-101A00: RNCC: 3 | RNVC: 2
10291-101: RNCC: 5 | RNVC: 2

14 Mar 1990

5340-15-004-1529
Expansion Plug

150041529
1/43282/01: RNCC: 3 | RNVC: 2
1/43282/01: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-118-1955
Loop Clamp

151181955
10442190: RNCC: 3 | RNVC: 2

22 Apr 1994

5340-15-110-6361
Screw Thread Insert

151106361
4293: RNCC: 3 | RNVC: 2
95999192: RNCC: 5 | RNVC: 2
0-111101: RNCC: 5 | RNVC: 2

19 Mar 1990

5340-15-118-3341
Retaining Strap

151183341
60147030: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-120-2651
Expansion Plug

151202651
14622487: RNCC: 3 | RNVC: 2

9 Mar 1995

5340-15-204-0925
Padlock

152040925
AS-LHT50: RNCC: 3 | RNVC: 2
(241)AF517AS-LHT50: RNCC: 5 | RNVC: 2

5 Sep 2011

5340-15-120-6640
Handle Grip

151206640
I.222/25-M6: RNCC: 3 | RNVC: 2
190512404: RNCC: 5 | RNVC: 2

1 May 1996

5340-15-145-0958
Strap Fastener Loop

151450958
999-0500-57-5: RNCC: 3 | RNVC: 2

28 Apr 1997

5340-15-206-8201
Loop Clamp

152068201
ED0036171470-S: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-197-1763
Rim Lock Set

151971763
PN UAS 00030754: RNCC: 3 | RNVC: 2
5340F76028085: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-118-4039
Angle Bracket

151184039
60156827: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-118-7017
Angle Bracket

151187017
73128798: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-062-9043
Mending Plate

150629043
0-55262: RNCC: 3 | RNVC: 2

28 Aug 1981

5340-15-045-2923
Loop Clamp

150452923
N0R2-505-06-7B: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-045-3000
Loop Clamp

150453000
500-12-05-34: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-109-4095
Rod End Clevis

151094095
808-17151-5: RNCC: 3 | RNVC: 2

8 Jan 1990

5340-15-177-3425
Retaining Strap

151773425
99453783: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-169-1268
Coat And Hat Hook

151691268
F72006709: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-111-7984
Angle Bracket

151117984
10264: RNCC: 3 | RNVC: 2

1 Jul 1990

5340-15-118-3377
Angle Bracket

151183377
60144208: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-157-6151
Angle Bracket

151576151
11031206: RNCC: 3 | RNVC: 2
(241)A977211031206: RNCC: 5 | RNVC: 2

9 Oct 2003

5340-15-004-7538
Angle Bracket

150047538
P-160318-001: RNCC: 3 | RNVC: 2
P160318-001: RNCC: 5 | RNVC: 2

13 Jul 1978

5340-15-103-0153
Support Hook

151030153
79025462: RNCC: 3 | RNVC: 2

21 Jun 1987

5340-15-163-4066
Mounting Bracket

151634066
99443382: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-196-2013
Rim Lock Set

151962013
PN UAS 00002087: RNCC: 3 | RNVC: 2
5340F76004077: RNCC: 5 | RNVC: 9

31 Mar 2004

5340-15-108-6306
Screw Thread Insert

151086306
60139837: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-179-7141
Mounting Bracket

151797141
0000098196099: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-197-1768
Rim Lock Set

151971768
PN UAS 00022623: RNCC: 3 | RNVC: 2
5340F76009408: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-202-4460
Luggage Handle

152024460
0350/3: RNCC: 3 | RNVC: 2
(241)A52000350/3: RNCC: 5 | RNVC: 2

25 Mar 2007

5340-15-181-1918
Mounting Bracket

151811918
120020358: RNCC: 3 | RNVC: 2

12 Nov 2008

5340-15-177-4242
Bridge Clamp

151774242
048721: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-206-2880
Access Cover

152062880
ED0027503980-S: RNCC: 3 | RNVC: 2

1 Jun 2012

5340-15-109-4705
Angle Bracket

151094705
1Z 587072: RNCC: 3 | RNVC: 2
1Z 587072: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-045-2556
Handle Grip

150452556
510-12-15: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-073-5262
Flush Lock

150735262
73-70X63: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-113-1472
Butt Hinge

151131472
311A2934-001: RNCC: 3 | RNVC: 2

7 Oct 1990

5340-15-119-5592
Angle Bracket

151195592
4881558: RNCC: 3 | RNVC: 2

19 Sep 1994

5340-15-152-2803
Access Cover

151522803
E2872-0000: RNCC: 5 | RNVC: 2
E2872-0000: RNCC: 5 | RNVC: 9

17 Aug 2000

5340-15-179-6765
Latch Bar

151796765
0000500408269: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-155-1046
Rod End Clevis

151551046
142020113: RNCC: 3 | RNVC: 2

18 Jan 2002

5340-15-063-5964
Retaining Strap

150635964
5941007: RNCC: 3 | RNVC: 2
5941007: RNCC: 5 | RNVC: 9

13 Nov 1982

5340-15-117-9098
Butt Hinge Leaf

151179098
214A2028-017: RNCC: 3 | RNVC: 2

31 Jan 1994

5340-15-151-9364
Angle Bracket

151519364
0-172279: RNCC: 3 | RNVC: 2

26 Jul 2000

5340-15-005-3075
Rod End Clevis

150053075
0-28303: RNCC: 3 | RNVC: 2

7 Sep 1978

5340-15-179-7354
Mounting Bracket

151797354
504027316: RNCC: 3 | RNVC: 2
(241)A4249504027316: RNCC: 5 | RNVC: 2

7 Jun 2007

5340-15-202-9547
Angle Bracket

152029547
920-7548/05: RNCC: 3 | RNVC: 2
(241)A4582920-7548/05: RNCC: 5 | RNVC: 2

8 Oct 2007

5340-15-059-7127
Angle Bracket

150597127
132-0097-12: RNCC: 3 | RNVC: 2

10 Apr 1975

5340-15-194-3601
Block Clamp

151943601
109-0515-58-117: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-15-187-1735
Friction Catch

151871735
79005753: RNCC: 3 | RNVC: 2

23 Feb 2009

5340-15-007-1895
Retaining Strap

150071895
1389222: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-148-2127
Retaining Band

151482127
999-0500-84-1: RNCC: 3 | RNVC: 2

2 Jul 1998

5340-15-153-9054
Mounting Bracket

151539054
00084231: RNCC: 3 | RNVC: 2
(241)A333400084231: RNCC: 4 | RNVC: 1
9423T1: RNCC: 5 | RNVC: 2

9 Mar 2001

5340-15-001-8163
Mounting Bracket

150018163
5949783616: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-157-9167
Angle Bracket

151579167
0-163681: RNCC: 3 | RNVC: 2
(241)A39630-163681: RNCC: 5 | RNVC: 2
1PA39630-163681: RNCC: 5 | RNVC: 2

24 Nov 2003

5340-15-064-1341
Plug Button

150641341
999-5001-10-126: RNCC: 3 | RNVC: 2

21 Oct 1983

5340-15-136-9121
Handle Grip

151369121
47-267-136-7: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-065-7276
Access Door Hinge

150657276
109-0361-07-2: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-15-116-4906
Retaining Strap

151164906
60151166: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-178-7488
Mounting Bracket

151787488
057457: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-120-4519
Access Cover

151204519
142505184: RNCC: 3 | RNVC: 2

25 May 1995

5340-15-177-3749
Mounting Plate

151773749
026938: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-198-1930
Loop Clamp

151981930
55322061: RNCC: 3 | RNVC: 2

24 Jun 2004

5340-15-153-6873
Loop Clamp

151536873
142068022: RNCC: 3 | RNVC: 2

20 Feb 2001

5340-15-007-7077
Retaining Clip

150077077
4180561: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-053-9987
Rod End Clevis

150539987
205-6-167-11: RNCC: 3 | RNVC: 2
205-6-167-11: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-000-4366
Loop Clamp

150004366
425306807323: RNCC: 3 | RNVC: 2

1 Mar 2013

5340-15-195-8671
Mounting Bracket

151958671
6422001670: RNCC: 3 | RNVC: 2
(241)AJ6116422001670: RNCC: 5 | RNVC: 2

23 May 2011

5340-15-177-3816
Mounting Bracket

151773816
032459: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-007-0140
Rod End Clevis

150070140
41171-8: RNCC: 3 | RNVC: 2

30 Jan 1980

5340-15-005-5347
Rod End Connector

150055347
1026-01-153: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-073-5220
Rim Lock

150735220
1756PART29: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-150-0885
Loop Clamp

151500885
016020016: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-073-5216
Rim Lock Set

150735216
1756PART7: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-063-3333
Plug Button

150633333
1/45916/87: RNCC: 3 | RNVC: 2
14591687: RNCC: 5 | RNVC: 2

15 Oct 1982

5340-15-120-6082
Mending Plate

151206082
204-8929-40-3: RNCC: 3 | RNVC: 2

10 Jul 1995

5340-15-177-4328
Mounting Bracket

151774328
051110: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-181-1921
Mounting Bracket

151811921
120020253: RNCC: 3 | RNVC: 2

12 Nov 2008

5340-15-062-3694
Angle Bracket

150623694
012063 K: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-157-9747
Loop Clamp

151579747
EN4114F14WH0: RNCC: 2 | RNVC: 2

14 Dec 2003

5340-15-002-5072
Loop Clamp

150025072
4500: RNCC: 3 | RNVC: 2

2 Sep 2013

5340-15-174-6452
Mounting Bracket

151746452
MECC35139-M: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-15-154-7739
Mounting Bracket

151547739
G473000: RNCC: 3 | RNVC: 2

18 Sep 2001

5340-15-003-9034
Loop Clamp

150039034
182734021: RNCC: 3 | RNVC: 2
(241)A0199182734021: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-154-0199
Loop Clamp

151540199
73202A041003: RNCC: 5 | RNVC: 2
73202A041003: RNCC: 5 | RNVC: 9

15 Mar 2001

5340-15-045-3495
Loop Clamp

150453495
722-20-20: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-102-1041
Access Door Hinge

151021041
193-0484/27: RNCC: 3 | RNVC: 2

22 Jun 1986

5340-15-062-7486
Bow Handle

150627486
330-0260/01: RNCC: 3 | RNVC: 2

11 Jun 1981

5340-15-066-0396
Retaining Strap

150660396
1127-36-295: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-187-2069
Mounting Bracket

151872069
SC 100 693: RNCC: 3 | RNVC: 2
(241)A3980SC100693: RNCC: 5 | RNVC: 2

24 Feb 2009

5340-15-187-4780
Bridge Clamp

151874780
99458588: RNCC: 3 | RNVC: 2

3 Apr 2009

5340-15-150-8896
Mounting Bracket

151508896
00011632: RNCC: 3 | RNVC: 2

3 Feb 2000

5340-15-003-2608
Mounting Bracket

150032608
504376743: RNCC: 3 | RNVC: 2

31 Oct 2013

5340-15-063-7005
Retaining Clip

150637005
192-0499/15: RNCC: 3 | RNVC: 2

25 May 1983

5340-15-119-0747
Loop Clamp

151190747
70927155: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-051-3150
Retaining Strap

150513150
1-01127-05: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-206-3549
Loop Clamp

152063549
50040 5357: RNCC: 3 | RNVC: 2

4 Jun 2012

5340-15-202-4514
Luggage Handle

152024514
1620/3: RNCC: 3 | RNVC: 2
(241)A52001620/3: RNCC: 5 | RNVC: 2

25 Mar 2007

5340-15-152-7836
Mounting Bracket

151527836
P110453: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-120-1976
Butt Hinge Leaf

151201976
212A7102-002: RNCC: 3 | RNVC: 2

31 Jan 1995

5340-15-178-4873
Loop Clamp

151784873
98487328: RNCC: 3 | RNVC: 2
A242018-004: RNCC: 5 | RNVC: 2

1 Jul 2005

5340-15-194-9362
Bow Handle

151949362
5.321-647.0: RNCC: 3 | RNVC: 2
(241)AJ2225.321-647.0: RNCC: 5 | RNVC: 2

8 Feb 2011

5340-15-058-4082
Rod End Clevis

150584082
553008131000: RNCC: 2 | RNVC: 3
30-08-131: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-179-0959
Handle Grip

151790959
010100: RNCC: 3 | RNVC: 2

13 Jun 2006

5340-15-177-6262
Access Cover

151776262
212983P1: RNCC: 3 | RNVC: 2

4 Jun 2004

5340-15-002-0088
Lever Bracket

150020088
6-222-042: RNCC: 3 | RNVC: 2

16 Sep 1980

5340-15-144-6651
Handle Grip

151446651
656-1-4: RNCC: 3 | RNVC: 2
656001: RNCC: 3 | RNVC: 2

11 Dec 1996

5340-15-202-9548
Angle Bracket

152029548
920-7548/06: RNCC: 3 | RNVC: 2
(241)A4582920-7548/06: RNCC: 5 | RNVC: 2

8 Oct 2007

5340-15-195-1464
Filler Opening Cap

151951464
TP1.02601: RNCC: 3 | RNVC: 2

4 Mar 2011

5340-15-200-9142
Corner Brace

152009142
A6121-92197-7: RNCC: 3 | RNVC: 2
(241)A0126A6121-92197-7: RNCC: 5 | RNVC: 2

3 Apr 2006

5340-15-005-2764
Access Hole Frame

150052764
0-33187: RNCC: 3 | RNVC: 2

28 Aug 1978

5340-15-106-2478
Key Holder

151062478
V.393-25X26: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-187-3626
Self-Locking Insert

151873626
701/16503: RNCC: 3 | RNVC: 2
701/16503: RNCC: 5 | RNVC: 2
(241)AD751701/16503: RNCC: 5 | RNVC: 2

19 Mar 2009

5340-15-113-0084
Bow Handle

151130084
37952216000: RNCC: 3 | RNVC: 2
93155270: RNCC: 5 | RNVC: 2

23 Feb 1989

5340-15-118-8214
Mounting Bracket

151188214
9447322: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-120-4586
Rod End Clevis

151204586
145376-1: RNCC: 3 | RNVC: 2

29 May 1995

5340-15-005-2722
Loop Clamp

150052722
0-31015: RNCC: 3 | RNVC: 2

7 Sep 1978

5340-15-206-8202
Mounting Bracket

152068202
ED0048963870-S: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-194-6439
Mounting Bracket

151946439
04934: RNCC: 3 | RNVC: 2
(241)AH37504934: RNCC: 5 | RNVC: 2

20 Dec 2010

5340-15-108-6273
Retaining Strap

151086273
8577861: RNCC: 3 | RNVC: 2
(7001)5340151086273: RNCC: 5 | RNVC: 2

30 Mar 1988

5340-15-203-4433
Mounting Bracket

152034433
VSADT-100PM: RNCC: 3 | RNVC: 2
(241)AA201VSADT-100PM: RNCC: 5 | RNVC: 2

30 Jan 2008

5340-15-195-3912
Mounting Bracket

151953912
109-0601-79-176: RNCC: 3 | RNVC: 2

21 Mar 2011

5340-15-117-1463
Access Cover

151171463
02700A106940: RNCC: 5 | RNVC: 2
02700A106940: RNCC: 5 | RNVC: 9

10 Aug 1993

5340-15-113-1467
Butt Hinge

151131467
311A5518-001: RNCC: 3 | RNVC: 2

7 Oct 1990

5340-15-007-0793
Retaining Ring

150070793
0-08513: RNCC: 3 | RNVC: 2
(241)A39630-08513: RNCC: 5 | RNVC: 2
1PA39630-08513: RNCC: 5 | RNVC: 2

29 Jun 1979

5340-15-117-5257
Mounting Bracket

151175257
WD-8: RNCC: 3 | RNVC: 2
WD8: RNCC: 3 | RNVC: 2

4 Nov 1993

5340-15-115-7450
Clamping Catch

151157450
271004/16: RNCC: 3 | RNVC: 2

3 Sep 1993

5340-15-207-5964
Retaining Strap

152075964
178904344: RNCC: 3 | RNVC: 2
(241)A0199178904344: RNCC: 5 | RNVC: 2

5 Nov 2012

5340-15-007-2561
Angle Bracket

150072561
1383725: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-062-1939
Angle Bracket

150621939
P-892791-003: RNCC: 3 | RNVC: 2
P892791-003: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-178-7317
Loop Clamp

151787317
CF-322: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-068-4012
Rod End Clevis

150684012
212-5200-25-1: RNCC: 3 | RNVC: 2

9 Dec 1985

5340-15-152-3514
Angle Bracket

151523514
0-163770: RNCC: 3 | RNVC: 2
00163770: RNCC: 3 | RNVC: 2
(241)A39630-163770: RNCC: 5 | RNVC: 2

4 Sep 2000

5340-15-189-1782
Access Cover

151891782
109-3900-78-115: RNCC: 3 | RNVC: 2

2 Feb 2010

5340-15-109-8783
Angle Bracket

151098783
60113493: RNCC: 3 | RNVC: 2

15 Oct 1988

5340-15-007-2600
Angle Bracket

150072600
1386517: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-100-8074
Webbing Strap

151008074
109-0310-27-9: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-15-100-1051
Angle Bracket

151001051
P-852552-001: RNCC: 3 | RNVC: 2
P852552-001: RNCC: 5 | RNVC: 2

10 Sep 1986

5340-15-118-3633
Angle Bracket

151183633
60140260: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-231-8926
Handle Grip

152318926
71308949: RNCC: 3 | RNVC: 2
254015E106518: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-179-6773
Angle Bracket

151796773
0000500403014: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-109-4187
Tubular Fairlead

151094187
80470-80570: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-148-3486
Angle Bracket

151483486
102173: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-116-3315
Caster Wheel

151163315
NTF200: RNCC: 3 | RNVC: 2

22 Apr 1993

5340-15-116-4777
Mending Plate

151164777
60151184: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-116-4793
Expansion Plug

151164793
17913680: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-007-2505
Retaining Strap

150072505
1370605: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-074-3978
Retaining Strap

150743978
7UNI2136CD: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-003-9079
Mounting Plate

150039079
182741045: RNCC: 3 | RNVC: 2
(241)A0199182741045: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-007-2043
Angle Bracket

150072043
1372929: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-007-1899
Retaining Strap

150071899
1384224: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-200-3480
Bow Handle

152003480
79090157: RNCC: 3 | RNVC: 2
(241)AD75179090157: RNCC: 5 | RNVC: 2
79090157: RNCC: 5 | RNVC: 2

14 Dec 2005

5340-15-113-8599
Retaining Strap

151138599
1Z 589496: RNCC: 3 | RNVC: 2
1Z 589496: RNCC: 5 | RNVC: 9

13 Jun 1994

5340-15-187-8881
Loop Clamp

151878881
46634: RNCC: 3 | RNVC: 2
(241)A568146634: RNCC: 5 | RNVC: 2

20 May 2009

5340-15-108-3111
Angle Bracket

151083111
60130120: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-203-2591
Mounting Plate

152032591
0050890: RNCC: 3 | RNVC: 2

17 Dec 2007

5340-15-147-0640
Retaining Strap

151470640
23.43.85.01: RNCC: 3 | RNVC: 2

21 Aug 1997

5340-15-116-1561
Plain Solid Disk

151161561
DPR23780/3-33: RNCC: 3 | RNVC: 2

17 Mar 1993

5340-15-181-2715
Mounting Bracket

151812715
771-1016/01: RNCC: 3 | RNVC: 2
(241)A0069771-1016/01: RNCC: 5 | RNVC: 2

20 Nov 2008

5340-15-194-1812
Mounting Bracket

151941812
02-10-691-195-C1: RNCC: 3 | RNVC: 2

29 Sep 2010

5340-15-119-3852
Mending Plate

151193852
60169733: RNCC: 3 | RNVC: 2

25 Jul 1994

5340-15-118-7125
Mending Plate

151187125
73130012: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-109-1802
Retaining Strap

151091802
1372482: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-120-7492
Screw Thread Insert

151207492
149084 FIND N0. 15: RNCC: 3 | RNVC: 2
842.12.0905.000.1594: RNCC: 5 | RNVC: 2

31 Jul 1995

5340-15-170-5531
Clip Retainer Plate

151705531
J57151844-001: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-15-150-7420
Threaded Rod End

151507420
523C03200-001: RNCC: 3 | RNVC: 2

20 Dec 1999

5340-15-149-3032
Angle Bracket

151493032
4885370: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-169-3856
Coat And Hat Hook

151693856
F72011327: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-001-1143
Threaded Rod End

150011143
504343876: RNCC: 3 | RNVC: 2

31 May 2013

5340-15-062-6993
Handle Grip

150626993
60115649: RNCC: 3 | RNVC: 2
(241)AF90860115649: RNCC: 5 | RNVC: 2
60115649: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-116-2311
Screw Thread Insert

151162311
210002533: RNCC: 5 | RNVC: 2

30 Mar 1993

5340-15-120-2740
Angle Bracket

151202740
1288655: RNCC: 3 | RNVC: 2

9 Mar 1995

5340-15-056-9885
Loop Clamp

150569885
67171-01-001: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-121-9885
Angle Bracket

151219885
60159828: RNCC: 3 | RNVC: 2

4 Apr 1996

5340-15-117-6370
Mending Plate

151176370
142507328: RNCC: 3 | RNVC: 2

4 Jan 1994

5340-15-119-5036
Plug Button

151195036
999-5001-10-144: RNCC: 3 | RNVC: 2

29 Mar 1996

5340-15-050-1854
Retaining Ring

150501854
306075E: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-194-4161
Access Door Hinge

151944161
A402A002B: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-15-009-1994
Catch Strike

150091994
1378949: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-149-2299
Access Cover

151492299
541-29-1170: RNCC: 3 | RNVC: 2

23 Dec 1998

5340-15-179-6481
Angle Bracket

151796481
J53350610-001: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-045-0016
Rod End Clevis

150450016
1110-01: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-051-4675
Retaining Clip

150514675
PR35-683: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-105-8966
Spring Tension Clip

151058966
5086-03-66: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-207-0822
Butt Hinge

152070822
109-0641-43-143: RNCC: 3 | RNVC: 2

3 Sep 2012

5340-15-008-1218
Loop Clamp

150081218
A1-98014-401: RNCC: 3 | RNVC: 2
A1-98014-401: RNCC: 5 | RNVC: 9

22 Apr 1981

5340-15-156-7710
Mounting Plate

151567710
32X15X5MM DIAM.FORO MM4: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-15-059-2479
Retaining Strap

150592479
1127-18-149: RNCC: 3 | RNVC: 2

12 Oct 1974

5340-15-009-3553
Retaining Strap

150093553
1376-19-351: RNCC: 3 | RNVC: 2
137619351: RNCC: 5 | RNVC: 2

1 Jun 1987

5340-15-062-7042
Rod End Clevis

150627042
1/02/487/71: RNCC: 3 | RNVC: 2
10248771: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-112-0310
Butt Hinge Leaf

151120310
26-1-91-06: RNCC: 3 | RNVC: 2

19 Feb 1991

5340-15-058-6757
Rim Lock

150586757
1971-034: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-118-6509
Retaining Strap

151186509
70053986: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-116-4762
Butt Hinge Leaf

151164762
60165629: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-117-2625
Mending Plate

151172625
132505143: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-15-119-7144
Angle Bracket

151197144
60173214: RNCC: 3 | RNVC: 2

8 Nov 1994

5340-15-113-0382
Angle Bracket

151130382
246-009/81T: RNCC: 3 | RNVC: 2
246-009/81T: RNCC: 5 | RNVC: 9

5 Nov 1990

5340-15-007-2899
Retaining Strap

150072899
1376-18-247: RNCC: 3 | RNVC: 2
137618247: RNCC: 5 | RNVC: 2

21 Jul 1999

5340-15-151-9514
Angle Bracket

151519514
9604720: RNCC: 3 | RNVC: 2
9604720: RNCC: 5 | RNVC: 2
(241)A39630-119621: RNCC: 5 | RNVC: 2
0-119621: RNCC: 5 | RNVC: 2

27 Jul 2000

5340-15-148-3543
Angle Bracket

151483543
104654: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-178-6220
Access Cover

151786220
7D.P77-7308: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-119-4669
Plain Solid Disk

151194669
DPR19610-66: RNCC: 3 | RNVC: 2

9 Jan 1995

5340-15-205-0058
Mechanical Stop

152050058
ACCESSORIORITENZIONE-AC114: RNCC: 3 | RNVC: 2
(241)AH825ACCESSORIORITENZIONE-A: RNCC: 5 | RNVC: 2

9 Feb 2012

5340-15-118-7013
Access Cover

151187013
73128785: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-187-6211
Retaining Clip

151876211
JA/PC: RNCC: 3 | RNVC: 2
(241)AH405JA/PC: RNCC: 5 | RNVC: 2

15 Apr 2009

5340-15-200-7975
Retaining Bail

152007975
SO 1-14: RNCC: 3 | RNVC: 2
(241)A5393SO 1-14: RNCC: 5 | RNVC: 2

1 Mar 2006

5340-15-062-7259
Angle Bracket

150627259
1141-33-104: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-158-6053
Access Cover

151586053
122606260: RNCC: 3 | RNVC: 2

10 Mar 2004

5340-15-153-5240
Access Cover

151535240
142076923: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-112-8752
Angle Bracket

151128752
60138773: RNCC: 3 | RNVC: 2

16 Sep 1989

5340-15-065-4286
Door Handle

150654286
204-1300-25-1: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-100-2538
Butt Hinge Leaf

151002538
2220-01-03R1: RNCC: 3 | RNVC: 2

20 Jan 1987

5340-15-151-9435
Angle Bracket

151519435
0-174421: RNCC: 3 | RNVC: 2
00174421: RNCC: 3 | RNVC: 2
(241)A39630-174421: RNCC: 5 | RNVC: 2

26 Jul 2000

5340-15-147-5960
Mounting Plate

151475960
738375-12: RNCC: 3 | RNVC: 2
738375-12: RNCC: 5 | RNVC: 9

30 Dec 1997

5340-15-054-9689
Access Door Hinge

150549689
206-1015-56-17: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-109-3813
Mending Plate

151093813
5137-290-52: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-152-2909
Mounting Bracket

151522909
36: RNCC: 3 | RNVC: 2

17 Aug 2000

5340-15-119-5593
Angle Bracket

151195593
4881554: RNCC: 3 | RNVC: 2

19 Sep 1994

5340-15-120-4494
Retaining Strap

151204494
142507349: RNCC: 3 | RNVC: 2

25 May 1995

5340-15-153-2585
Handle Grip

151532585
122606406: RNCC: 2 | RNVC: 3

12 Dec 2000

5340-15-148-3484
Angle Bracket

151483484
102529: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-153-2632
Handle Grip

151532632
122611246: RNCC: 2 | RNVC: 3

12 Dec 2000

5340-15-195-5550
Mounting Bracket

151955550
ICA-LCD 2601: RNCC: 3 | RNVC: 2
(241)AE051ICA-LCD2601: RNCC: 5 | RNVC: 2

6 Apr 2011

5340-15-206-8321
Loop Clamp

152068321
DV 2346-090: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-052-0839
Angle Bracket

150520839
B3300-65: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-005-5312
Plain Solid Disk

150055312
1276-19-308: RNCC: 3 | RNVC: 2
127619308: RNCC: 5 | RNVC: 2

6 Jul 2000

5340-15-007-0649
Retaining Strap

150070649
1026-04-165: RNCC: 3 | RNVC: 2

29 Jul 1977

5340-15-117-1974
Leather Strap

151171974
190509106: RNCC: 3 | RNVC: 2

2 Sep 1993

5340-15-003-9292
Mounting Plate

150039292
121083: RNCC: 3 | RNVC: 2

3 Dec 2013

5340-15-203-1560
Latch Bar

152031560
212-1305-02-101: RNCC: 3 | RNVC: 2

27 Nov 2007

5340-15-101-0879
Spring Holder

151010879
109-0101-98-101: RNCC: 3 | RNVC: 2

24 Dec 1987

5340-15-100-1064
Access Door Hinge

151001064
P-882742-402: RNCC: 3 | RNVC: 2
P882742-402: RNCC: 5 | RNVC: 2

10 Sep 1986

5340-15-061-2725
Spring Tension Clip

150612725
CTT84-14: RNCC: 3 | RNVC: 2

18 Feb 1977

5340-15-199-5081
Access Cover

151995081
122516241: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-15-118-4459
Mending Plate

151184459
60152772: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-155-9733
Loop Clamp

151559733
EN4113F10H: RNCC: 2 | RNVC: 2

17 Oct 2002

5340-15-112-2232
Loop Clamp

151122232
8965572: RNCC: 3 | RNVC: 2

11 Sep 1989

5340-15-062-1972
Angle Bracket

150621972
P-892819-003: RNCC: 3 | RNVC: 2
P892819-003: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-003-2833
Protection Bellows

150032833
GZ10887: RNCC: 3 | RNVC: 2
516434-D: RNCC: 5 | RNVC: 2
516434: RNCC: 5 | RNVC: 2

31 Oct 2013

5340-15-144-7931
Metal Grille

151447931
GRG-CL2400: RNCC: 3 | RNVC: 2

24 Jan 1997

5340-15-153-3884
Mending Plate

151533884
5137-309-10: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-178-2443
Filler Opening Cap

151782443
TCO.22X1,5+A: RNCC: 3 | RNVC: 2

11 Mar 2005

5340-15-063-8264
Mounting Plate

150638264
P-195014-004: RNCC: 3 | RNVC: 2
P195014-004: RNCC: 5 | RNVC: 2

27 Oct 1983

5340-15-073-8759
Rim Lock

150738759
39B90X50: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-050-5115
Rod End Clevis

150505115
4-3351-201-41865-4: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-151-9397
Angle Bracket

151519397
0-173904: RNCC: 3 | RNVC: 2
(241)A39630-173904: RNCC: 5 | RNVC: 2

26 Jul 2000

5340-15-001-7877
Mounting Bracket

150017877
5949778991: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-157-9242
Mending Plate

151579242
0-166723: RNCC: 3 | RNVC: 2
(241)A39630-166723: RNCC: 5 | RNVC: 2
1PA39630-166723: RNCC: 5 | RNVC: 2

25 Nov 2003

5340-15-177-4149
Mounting Bracket

151774149
046402: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-111-9282
Loop Clamp

151119282
60110738: RNCC: 3 | RNVC: 2

10 Sep 1989

5340-15-188-6159
Mounting Bracket

151886159
50020046: RNCC: 3 | RNVC: 2
5002 S2: RNCC: 5 | RNVC: 2
392292114902: RNCC: 6 | RNVC: 9

15 Oct 2009

5340-15-202-4477
Luggage Handle

152024477
1510/3: RNCC: 3 | RNVC: 2
(241)A52001510/3: RNCC: 5 | RNVC: 2

25 Mar 2007

5340-15-051-3224
Butt Hinge

150513224
4526260: RNCC: 3 | RNVC: 2
4526260: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-153-9070
Mounting Bracket

151539070
00085363: RNCC: 3 | RNVC: 2
(241)A333400085363: RNCC: 4 | RNVC: 1
9536T3: RNCC: 5 | RNVC: 2

9 Mar 2001

5340-15-118-8212
Loop Clamp

151188212
9445676: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-151-2166
Loop Clamp

151512166
9414T1: RNCC: 3 | RNVC: 2
00084141: RNCC: 3 | RNVC: 2
(241)A333400084141: RNCC: 4 | RNVC: 1

28 Apr 2000

5340-15-042-4885
Handle Grip

150424885
6569-6: RNCC: 3 | RNVC: 2

5 Apr 1972

5340-15-062-9247
Angle Bracket

150629247
0-101688: RNCC: 3 | RNVC: 2

28 Aug 1981

5340-15-109-1501
Rim Lock

151091501
979001: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-15-189-2296
Retaining Strap

151892296
584025: RNCC: 3 | RNVC: 2

9 Feb 2010

5340-15-186-9305
Support Hook

151869305
04023148: RNCC: 3 | RNVC: 2

5 Jan 2009

5340-15-157-6193
Butt Hinge

151576193
11031601: RNCC: 3 | RNVC: 2
(241)A977211031601: RNCC: 5 | RNVC: 2

9 Oct 2003

5340-15-120-7752
Bow Handle

151207752
59Z0910098: RNCC: 5 | RNVC: 2
59Z0910098: RNCC: 5 | RNVC: 9
59Z0910098: RNCC: 5 | RNVC: 9

31 Jul 1995

5340-15-180-4257
Access Cover

151804257
205-1600-10-165: RNCC: 3 | RNVC: 2
(241)A0126205-1600-10-165: RNCC: 5 | RNVC: 2

20 May 2008

5340-15-002-1376
Mounting Bracket

150021376
5801508596: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-005-1945
Retaining Clip

150051945
14574480: RNCC: 3 | RNVC: 2
14574480: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-020-1794
Handle Grip

150201794
01-231H72: RNCC: 3 | RNVC: 2
55.25.013.A: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-186-9167
Mounting Bracket

151869167
858328: RNCC: 3 | RNVC: 2
858328: RNCC: 5 | RNVC: 9

5 Jan 2009

5340-15-151-6733
Loop Clamp

151516733
14560187: RNCC: 3 | RNVC: 2

26 Jun 2000

5340-15-204-3477
Snap Hook

152043477
25100078: RNCC: 3 | RNVC: 2
(241)ACA6425100078: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-120-3464
Retaining Strap

151203464
60174851: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-193-8882
Access Cover

151938882
9456615: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-15-061-2640
Screw Thread Insert

150612640
1200096-111410003: RNCC: 5 | RNVC: 2
000200037600: RNCC: 5 | RNVC: 2
000200037600: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-111-3782
Angle Bracket

151113782
116A1411-001: RNCC: 3 | RNVC: 2

7 Sep 1990

5340-15-113-0836
Rod End Connector

151130836
68679-001A1: RNCC: 3 | RNVC: 2

9 May 1991

5340-15-121-7209
Protection Bellows

151217209
25113-12: RNCC: 3 | RNVC: 2
25113-12: RNCC: 5 | RNVC: 9

6 Feb 1996

5340-15-147-5959
Mounting Plate

151475959
738375-11: RNCC: 3 | RNVC: 2
738375-11: RNCC: 5 | RNVC: 9

30 Dec 1997

5340-15-154-9340
Mounting Plate

151549340
CBD71091P01: RNCC: 3 | RNVC: 2

13 Nov 2001

5340-15-103-8679
Expansion Plug

151038679
14282170: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-063-3336
Loop Clamp

150633336
39054999: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-154-3719
Loop Clamp

151543719
EN4113V43NH: RNCC: 2 | RNVC: 2

10 May 2001

5340-15-119-0808
Loop Clamp

151190808
70928010: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-000-5784
Mounting Bracket

150005784
C0090286: RNCC: 3 | RNVC: 2

20 Mar 2013

5340-15-153-6887
Loop Clamp

151536887
142068040: RNCC: 1 | RNVC: 3

20 Feb 2001

5340-15-188-3181
Butt Hinge

151883181
98423657: RNCC: 3 | RNVC: 2

2 Sep 2009

5340-15-149-0783
Loop Clamp

151490783
020105/2: RNCC: 3 | RNVC: 2

23 Nov 1998

5340-15-199-4776
Angle Bracket

151994776
1Q 340317: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-15-073-5254
Flush Lock

150735254
11I2: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-194-0096
Access Door Hinge

151940096
340319400000: RNCC: 3 | RNVC: 2

12 Aug 2010

5340-15-117-4189
Rod End Clevis

151174189
142502190: RNCC: 3 | RNVC: 2

4 Oct 1993

5340-15-061-2721
Retaining Strap

150612721
CTT84-10: RNCC: 3 | RNVC: 2

18 Feb 1977

5340-15-187-4629
Rim Latch

151874629
368-2891: RNCC: 3 | RNVC: 2
(241)AA136368-2891: RNCC: 5 | RNVC: 2

2 Apr 2009

5340-15-065-7105
Angle Bracket

150657105
109-3300-11-3: RNCC: 3 | RNVC: 2

26 Jun 1985

5340-15-207-2796
Mounting Bracket

152072796
135LL-200-N005: RNCC: 3 | RNVC: 2
(241)A3812135LL-200-N005: RNCC: 5 | RNVC: 2

1 Oct 2012

5340-15-121-6534
Mounting Bracket

151216534
800050175: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-105-2168
Mending Plate

151052168
2.1379.014.0: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-179-8940
Mounting Bracket

151798940
D1408601: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-045-3500
Loop Clamp

150453500
725-12-81: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-007-5214
Mending Plate

150075214
1139-03-116: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-062-2089
Bow Handle

150622089
26028.0000: RNCC: 5 | RNVC: 2
3-26028.0000//D: RNCC: 5 | RNVC: 2
3-26028D: RNCC: 5 | RNVC: 2
26028.0000: RNCC: 5 | RNVC: 9
3-26028.0000//D: RNCC: 5 | RNVC: 9
3-26028D: RNCC: 5 | RNVC: 9

28 Sep 1981

5340-15-104-4360
Expansion Plug

151044360
9-8990-06: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-179-7078
Mounting Plate

151797078
00181736: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-109-1833
Mending Plate

151091833
1394877: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-198-5544
Loop Clamp

151985544
J1220G12: RNCC: 3 | RNVC: 2
(241)A3460J1220G12: RNCC: 5 | RNVC: 2

13 Oct 2004

5340-15-001-5849
Mounting Bracket

150015849
504309293: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-001-1100
Mounting Bracket

150011100
5801359805: RNCC: 3 | RNVC: 2

31 May 2013

5340-15-193-6608
Rod End Clevis

151936608
163121476: RNCC: 3 | RNVC: 2
(241)A0199163121476: RNCC: 5 | RNVC: 2

28 Jun 2010

5340-15-121-6282
Loop Clamp

151216282
800033280: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-008-1837
Retaining Band

150081837
60114547: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-178-2207
Loop Clamp

151782207
50110950: RNCC: 3 | RNVC: 2
149-1219 ITEM 58: RNCC: 3 | RNVC: 2

11 Mar 2005

5340-15-121-0609
Screw Thread Insert

151210609
M2.5(X0.45)X1D: RNCC: 3 | RNVC: 2
210002500: RNCC: 5 | RNVC: 2

21 Sep 1995

5340-15-115-6225
Retaining Strap

151156225
1420-60-102: RNCC: 3 | RNVC: 2

17 Dec 1992

5340-15-060-1545
Butt Hinge Leaf

150601545
1376-31-165: RNCC: 3 | RNVC: 2
137631165: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-005-3159
Loop Clamp

150053159
0-01174: RNCC: 3 | RNVC: 2

7 Sep 1978

5340-15-162-6638
Hand Crank Arm

151626638
515.61389: RNCC: 3 | RNVC: 2

7 Dec 2001

5340-15-063-3248
Retaining Strap

150633248
60111266: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-001-6010
Retaining Bail

150016010
42566677: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-148-3551
Angle Bracket

151483551
107739: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-066-3008
Angle Bracket

150663008
3522 202 94960: RNCC: 3 | RNVC: 2

17 Sep 1985

5340-15-119-5475
Retaining Strap

151195475
4698862: RNCC: 3 | RNVC: 2

19 Sep 1994

5340-15-118-8604
Access Cover

151188604
299707214Z: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-193-9971
Mounting Plate

151939971
109-0325-38-205: RNCC: 3 | RNVC: 2

12 Aug 2010

5340-15-005-4617
Screw Thread Insert

150054617
2106-06320: RNCC: 3 | RNVC: 2
210606320: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-113-1445
Mending Plate

151131445
277A0254-001: RNCC: 3 | RNVC: 2

7 Oct 1990

5340-15-062-9059
Retaining Strap

150629059
0-55613: RNCC: 3 | RNVC: 2
1PA39630-55613: RNCC: 5 | RNVC: 2

9 Jul 1981

5340-15-189-2674
Access Cover

151892674
ECS3I LB2: RNCC: 3 | RNVC: 2

10 Feb 2010

5340-15-119-1495
Access Cover

151191495
73126185: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-054-3926
Retaining Ring

150543926
399134: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-006-4085
Spring Tension Clip

150064085
4292720: RNCC: 3 | RNVC: 2
4292720: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-155-8506
Angle Bracket

151558506
8870 003-951-BRT: RNCC: 3 | RNVC: 2

8 Aug 2002

5340-15-186-7943
Handwheel

151867943
6112100: RNCC: 3 | RNVC: 2

5 Jan 2009

5340-15-203-7317
Mounting Plate

152037317
00874R0460: RNCC: 3 | RNVC: 2
00874R0460: RNCC: 5 | RNVC: 2
CV173894: RNCC: 5 | RNVC: 2

27 Jun 2011

5340-15-177-4058
Mounting Plate

151774058
042831: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-198-5848
Block Clamp

151985848
AIT13901HHKE8330: RNCC: 3 | RNVC: 2

15 Oct 2004

5340-15-117-4205
Mending Plate

151174205
132507160: RNCC: 3 | RNVC: 2

4 Oct 1993

5340-15-007-7687
Spring Tension Clip

150077687
4687324: RNCC: 3 | RNVC: 2
04687324: RNCC: 5 | RNVC: 2
12695: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-000-4121
Handle Grip

150004121
N717U5003101: RNCC: 3 | RNVC: 2

28 Feb 2013

5340-15-057-6483
Sliding Door Track

150576483
204-7601-09-15: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-179-7206
Angle Bracket

151797206
00185187: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-108-5205
Retaining Strap

151085205
60110168: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-119-1806
Plug Button

151191806
75214658: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-203-8579
Butt Hinge

152038579
OMP-MLM-017: RNCC: 3 | RNVC: 2
(241)AE591OMP-MLM-017: RNCC: 5 | RNVC: 2

7 Jul 2011

5340-15-117-0186
Loop Clamp

151170186
SF260-16-315-01: RNCC: 3 | RNVC: 2
SF260-16-315-01: RNCC: 5 | RNVC: 9

28 Jul 1993

5340-15-118-8618
Access Cover

151188618
299709567D: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-150-3737
Screw Thread Insert

151503737
26T083P019: RNCC: 5 | RNVC: 2
26T083P019: RNCC: 5 | RNVC: 9

6 Oct 1999

5340-15-153-5243
Access Cover

151535243
142076945: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-060-4665
Mending Plate

150604665
1276-20-151: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-063-6465
Retaining Strap

150636465
4705879: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-001-5515
Access Cover

150015515
182719056: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-15-154-1996
Angle Bracket

151541996
0-168015: RNCC: 3 | RNVC: 2
(241)A39630-168015: RNCC: 5 | RNVC: 2
1PA39630-168015: RNCC: 5 | RNVC: 2

28 Mar 2001

5340-15-065-7243
Access Door Hinge

150657243
109-0503-16-6: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-15-004-8631
Bow Handle

150048631
314-0314-1: RNCC: 3 | RNVC: 2

27 Oct 1975

5340-15-198-6121
Plug Button

151986121
020150: RNCC: 3 | RNVC: 2
(241)A3593020150: RNCC: 5 | RNVC: 2

19 Oct 2004

5340-15-108-8379
Mending Plate

151088379
02550: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-008-0719
Mending Plate

150080719
60103170: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-102-8848
Ball Socket Seat

151028848
1Q526878: RNCC: 3 | RNVC: 2
1Q526878: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-113-9750
Expansion Plug

151139750
773703: RNCC: 3 | RNVC: 2

31 Mar 1992

5340-15-109-1247
Angle Bracket

151091247
60120674: RNCC: 3 | RNVC: 2

30 Apr 1988

5340-15-063-5947
Clamping Catch

150635947
4394818: RNCC: 3 | RNVC: 2
4394818: RNCC: 5 | RNVC: 9

13 Nov 1982

5340-15-003-1587
Retaining Bail

150031587
99366206: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-195-8597
Mounting Bracket

151958597
A0029918870: RNCC: 3 | RNVC: 2
(241)AJ611A0029918870: RNCC: 5 | RNVC: 2

23 May 2011

5340-15-108-5670
Spring Tension Clip

151085670
14215088: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-109-7248
Angle Bracket

151097248
60135073: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-177-3805
Loop Clamp

151773805
032127: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-120-2649
Retaining Strap

151202649
14198901: RNCC: 3 | RNVC: 2

9 Mar 1995

Load More Results