What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 11 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 11 of 72

5340-15-008-1883
Angle Bracket

150081883
60115368: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-113-1450
Angle Bracket

151131450
265A0069-003: RNCC: 3 | RNVC: 2

7 Oct 1990

5340-15-064-1343
Plug Button

150641343
999-5001-10-155: RNCC: 3 | RNVC: 2

1 Jul 1998

5340-15-119-3900
Catch Strike

151193900
60170374: RNCC: 3 | RNVC: 2

25 Jul 1994

5340-15-119-0886
Expansion Plug

151190886
70930423: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-059-7398
Screw Thread Insert

150597398
1182-20527: RNCC: 3 | RNVC: 2

5 Feb 1976

5340-15-156-4065
Loop Clamp

151564065
142068205: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-150-8515
Mounting Bracket

151508515
00075004: RNCC: 3 | RNVC: 2

1 Feb 2000

5340-15-206-4054
Retaining Clip

152064054
STN164347: RNCC: 3 | RNVC: 2
(241)A4447STN164347: RNCC: 5 | RNVC: 2

6 Jun 2012

5340-15-206-3084
Rod End Clevis

152063084
30043026: RNCC: 3 | RNVC: 2
Z06.01.18.00: RNCC: 5 | RNVC: 2
2510PL0997644: RNCC: 6 | RNVC: 9

1 Jun 2012

5340-15-117-0642
Bridge Clamp

151170642
4871773: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-059-2483
Retaining Strap

150592483
1127-05-627: RNCC: 3 | RNVC: 2

12 Oct 1974

5340-15-107-8799
Angle Bracket

151078799
60133958: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-108-9869
Angle Bracket

151089869
4684122: RNCC: 3 | RNVC: 2

9 May 1988

5340-15-158-5874
Threaded Rod End

151585874
122611607: RNCC: 3 | RNVC: 2

9 Mar 2004

5340-15-119-7160
Angle Bracket

151197160
60173021: RNCC: 3 | RNVC: 2

8 Nov 1994

5340-15-101-0792
Access Hole Frame

151010792
000200310000: RNCC: 5 | RNVC: 2
000200310000: RNCC: 5 | RNVC: 9

19 Jul 1987

5340-15-118-4037
Angle Bracket

151184037
60164704: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-103-0712
Angle Bracket

151030712
DE013.13.118: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-003-4622
Hand Crank

150034622
182713204: RNCC: 3 | RNVC: 2
(241)A0199182713204: RNCC: 5 | RNVC: 2

14 Nov 2013

5340-15-178-7681
Mounting Bracket

151787681
021192: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-003-9115
Mounting Plate

150039115
182741317: RNCC: 3 | RNVC: 2
(241)A0199182741317: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-206-0453
Loop Clamp

152060453
504064332: RNCC: 3 | RNVC: 2
(241)A4249504064332: RNCC: 5 | RNVC: 2

8 May 2012

5340-15-121-6580
Mounting Bracket

151216580
800052096: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-120-1427
Butt Hinge

151201427
113A6031-754: RNCC: 3 | RNVC: 2

16 Jan 1995

5340-15-104-4365
Expansion Plug

151044365
9-8990-07: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-063-3877
Retaining Strap

150633877
60110045: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-122-5922
Screw Thread Insert

151225922
T09AD050B70: RNCC: 5 | RNVC: 2
T09AD050B70: RNCC: 5 | RNVC: 9
T09AD050B70: RNCC: 5 | RNVC: 9

10 Sep 1996

5340-15-193-1788
Expansion Shield

151931788
MQS840: RNCC: 3 | RNVC: 2
(241)AA136MQS840: RNCC: 5 | RNVC: 2

20 Apr 2010

5340-15-179-8234
Pipe Hanger

151798234
AST20: RNCC: 3 | RNVC: 2
CAE01804: RNCC: 5 | RNVC: 2

3 Aug 2007

5340-15-132-8274
Handle Grip

151328274
121220: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-051-7994
Loop Clamp

150517994
1-03018-90: RNCC: 3 | RNVC: 2
10301890: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-063-2805
Angle Bracket

150632805
60108575: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-199-5056
Stand Base

151995056
162512115: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-15-199-4783
Mending Plate

151994783
1P 612413: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-15-162-4229
Loop Clamp

151624229
152737-1: RNCC: 3 | RNVC: 2

25 Sep 2001

5340-15-160-5057
Coat And Hat Hook

151605057
F720044611: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-120-3469
Butt Hinge

151203469
60176185: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-181-3687
Metal Grille

151813687
2C1144IS0022: RNCC: 3 | RNVC: 2
(241)A29802C1144IS0022: RNCC: 5 | RNVC: 2

10 Dec 2008

5340-15-062-7920
Mending Plate

150627920
0-34170: RNCC: 3 | RNVC: 2

28 Aug 1982

5340-15-120-7744
Spring Holder

151207744
133534: RNCC: 3 | RNVC: 2

31 Jul 1995

5340-15-151-7353
Angle Bracket

151517353
0-175990: RNCC: 3 | RNVC: 2

4 Jul 2000

5340-15-178-3877
Strap Hinge Leaf

151783877
P550005-1: RNCC: 3 | RNVC: 2

31 May 2005

5340-15-111-7559
Spring Holder

151117559
92204: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-109-1258
Retaining Band

151091258
42016305: RNCC: 3 | RNVC: 2

30 Apr 1988

5340-15-205-8864
Slide Keeper

152058864
361: RNCC: 3 | RNVC: 2
(241)A2668361: RNCC: 5 | RNVC: 2

12 Apr 2012

5340-15-122-2798
Loop Clamp

151222798
800056458: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-178-7297
Mounting Plate

151787297
396-1920/01.01: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-178-7768
Mounting Plate

151787768
031554: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-179-6775
Angle Bracket

151796775
0000500403291: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-149-8090
Access Cover

151498090
128529: RNCC: 3 | RNVC: 2
0052432: RNCC: 5 | RNVC: 2

2 Jun 1999

5340-15-147-8901
Pipe Hanger

151478901
ZIM75: RNCC: 3 | RNVC: 2
CAE00462: RNCC: 5 | RNVC: 2

18 May 1998

5340-15-197-1757
Rim Lock Set

151971757
PN UAS 00040101: RNCC: 3 | RNVC: 2
5340F76034172: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-059-7405
Screw Thread Insert

150597405
1182-20332: RNCC: 3 | RNVC: 2

5 Feb 1976

5340-15-160-5549
Coat And Hat Hook

151605549
F720018431: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-121-3898
Retaining Strap

151213898
79011765: RNCC: 3 | RNVC: 2

11 Dec 1995

5340-15-186-7939
Handwheel

151867939
6113025: RNCC: 3 | RNVC: 2

5 Jan 2009

5340-15-194-7809
Mending Plate

151947809
50194: RNCC: 3 | RNVC: 2
(241)A348850194: RNCC: 5 | RNVC: 2

14 Jan 2011

5340-15-118-9669
Mounting Bracket

151189669
75206988: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-054-8878
Angle Bracket

150548878
533-62-1150: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-057-2658
Screw Thread Insert

150572658
1276-23-121: RNCC: 3 | RNVC: 2
127623121: RNCC: 5 | RNVC: 2

31 Dec 1975

5340-15-101-8078
Handle Grip

151018078
808-43231-01: RNCC: 3 | RNVC: 2

12 Nov 1987

5340-15-113-0753
Butt Hinge Leaf

151130753
252A1036-001: RNCC: 3 | RNVC: 2

19 Jun 1991

5340-15-152-0003
Angle Bracket

151520003
60123948: RNCC: 3 | RNVC: 2

31 Jul 2000

5340-15-120-3540
Angle Bracket

151203540
60175700: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-117-9094
Butt Hinge Leaf

151179094
214A2028-013: RNCC: 3 | RNVC: 2

31 Jan 1994

5340-15-112-8496
Bow Handle

151128496
471990: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-204-4358
Retaining Band

152044358
7P040957: RNCC: 3 | RNVC: 2
(241)A29307P040957: RNCC: 5 | RNVC: 2

7 Nov 2011

5340-15-122-0938
Screw Thread Insert

151220938
529N1010205: RNCC: 3 | RNVC: 2
529N1010205: RNCC: 5 | RNVC: 9

30 Apr 1996

5340-15-009-2092
Clamp Bolt Assembly

150092092
60105153: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-153-2618
Stand Base

151532618
122611110: RNCC: 2 | RNVC: 3

12 Dec 2000

5340-15-118-7095
Mounting Bracket

151187095
73129360: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-201-2920
Stand Base

152012920
162505284: RNCC: 3 | RNVC: 2

20 Jul 2006

5340-15-202-2781
Loop Clamp

152022781
17764594: RNCC: 3 | RNVC: 2
(241)A424917764594: RNCC: 5 | RNVC: 2

19 Feb 2007

5340-15-063-3215
Angle Bracket

150633215
60104985: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-121-5744
Access Cover

151215744
1Q 539045LA: RNCC: 3 | RNVC: 2
1Q 539045LA: RNCC: 5 | RNVC: 9

18 Sep 1996

5340-15-148-6559
Angle Bracket

151486559
190525150: RNCC: 3 | RNVC: 2

17 Sep 1998

5340-15-154-2301
Angle Bracket

151542301
129-0950-16-107: RNCC: 3 | RNVC: 2

28 Mar 2001

5340-15-002-3397
Access Cover

150023397
AC-CO-01: RNCC: 3 | RNVC: 2
(241)A0478AC-CO-01: RNCC: 5 | RNVC: 2

12 Aug 2013

5340-15-134-7555
Angle Bracket

151347555
144415P1: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-142-7349
Mending Plate

151427349
1127-44-305: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-180-3638
Handle Grip

151803638
2584532: RNCC: 3 | RNVC: 2
2584532: RNCC: 5 | RNVC: 2

29 Apr 2008

5340-15-121-3692
Mounting Bracket

151213692
604451: RNCC: 3 | RNVC: 2

16 Jul 1996

5340-15-180-1474
Mounting Bracket

151801474
120020228: RNCC: 3 | RNVC: 2

15 Feb 2008

5340-15-062-4033
Butt Hinge Leaf

150624033
074016 J: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-118-0751
Spring Holder

151180751
468290: RNCC: 3 | RNVC: 2
D0468290: RNCC: 3 | RNVC: 2

1 Dec 1994

5340-15-118-3393
Loop Clamp

151183393
60140999: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-204-3410
Loop Clamp

152043410
0120RE49456: RNCC: 3 | RNVC: 2
(241)ACA640120RE49456: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-188-4996
Blank Panel

151884996
999-0500-85-19: RNCC: 3 | RNVC: 2
(241)A0126999-0500-85-19: RNCC: 5 | RNVC: 2

24 Sep 2009

5340-15-062-5121
Spring Holder

150625121
1213-25-152: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-204-9779
Snap Hook

152049779
786NNN6ANKK: RNCC: 3 | RNVC: 2
(241)A4747786NNN6ANKK: RNCC: 5 | RNVC: 2

7 Feb 2012

5340-15-203-2498
Access Cover

152032498
1Q 615066: RNCC: 3 | RNVC: 2

13 Dec 2007

5340-15-181-3684
Metal Grille

151813684
2C1144IS0020: RNCC: 3 | RNVC: 2
(241)A29802C1144IS0020: RNCC: 5 | RNVC: 2

10 Dec 2008

5340-15-179-7951
Access Cover

151797951
D1405887: RNCC: 3 | RNVC: 2

3 Aug 2007

5340-15-108-4285
Retaining Strap

151084285
4641875: RNCC: 3 | RNVC: 2

21 Jun 1996

5340-15-119-6390
Access Cover

151196390
60150432: RNCC: 3 | RNVC: 2

6 Oct 1994

5340-15-187-5968
Access Cover

151875968
500422915 RIGHT: RNCC: 3 | RNVC: 2

14 Apr 2009

5340-15-177-3533
Loop Clamp

151773533
FS077-095: RNCC: 3 | RNVC: 2
007920AA: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-170-7250
Hand Crank

151707250
318999A1: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-118-3637
Angle Bracket

151183637
60138317: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-118-2494
Access Cover

151182494
G104: RNCC: 3 | RNVC: 2

17 Oct 1994

5340-15-063-5967
Retaining Strap

150635967
5941011: RNCC: 3 | RNVC: 2
5941011: RNCC: 5 | RNVC: 9

13 Nov 1982

5340-15-118-4008
Angle Bracket

151184008
60159997: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-135-6570
Angle Bracket

151356570
5954935: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-068-1987
Handle Grip

150681987
3748310: RNCC: 3 | RNVC: 2
1134: RNCC: 5 | RNVC: 2

31 Oct 1984

5340-15-153-5245
Access Cover

151535245
142079910: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-178-9705
Block Clamp

151789705
1R610366: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-150-1012
Mounting Bracket

151501012
120002136: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-118-4027
Angle Bracket

151184027
60167390: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-119-1799
Retaining Strap

151191799
75214504: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-119-0479
Expansion Plug

151190479
70917630: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-007-1877
Retaining Strap

150071877
1384169: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-157-6143
Mending Plate

151576143
11031003: RNCC: 3 | RNVC: 2
(241)A977211031003: RNCC: 5 | RNVC: 2

9 Oct 2003

5340-15-116-4775
Mending Plate

151164775
60151122: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-074-3972
Retaining Strap

150743972
12UNI2135CD: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-157-6652
Angle Bracket

151576652
11031615: RNCC: 3 | RNVC: 2
(241)A977211031615: RNCC: 5 | RNVC: 2

15 Oct 2003

5340-15-112-3477
Retaining Strap

151123477
60155481: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-189-4750
Mounting Plate

151894750
98174287: RNCC: 3 | RNVC: 2

25 Feb 2010

5340-15-054-8178
Rod End Clevis

150548178
AF106-05A90: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-008-1535
Retaining Strap

150081535
32867-002: RNCC: 5 | RNVC: 2
32867-002: RNCC: 5 | RNVC: 9
32867-002: RNCC: 5 | RNVC: 9

10 May 1981

5340-15-008-0718
Mending Plate

150080718
60112201: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-009-6585
Screw Thread Insert

150096585
529N1010305: RNCC: 3 | RNVC: 2
529N1010305: RNCC: 5 | RNVC: 9

1 Oct 1980

5340-15-153-5234
Access Cover

151535234
142065801: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-103-0716
Angle Bracket

151030716
DE013.13.463: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-120-3546
Angle Bracket

151203546
60175058: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-150-6021
Angle Bracket

151506021
105946: RNCC: 3 | RNVC: 2

6 Dec 1999

5340-15-063-5943
Retaining Strap

150635943
4112293: RNCC: 3 | RNVC: 2
4112293: RNCC: 5 | RNVC: 9

13 Nov 1982

5340-15-136-9152
Retaining Ring

151369152
ADR9E: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-179-7349
Mounting Bracket

151797349
500387097: RNCC: 3 | RNVC: 2
(241)A4249500387097: RNCC: 5 | RNVC: 2

7 Jun 2007

5340-15-189-4761
Padlock

151894761
22610 50 0: RNCC: 3 | RNVC: 2

25 Feb 2010

5340-15-001-8400
Mounting Bracket

150018400
500439096: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-179-7346
Mounting Bracket

151797346
500306755: RNCC: 3 | RNVC: 2
(241)A4249500306755: RNCC: 5 | RNVC: 2

7 Jun 2007

5340-15-111-2795
Angle Bracket

151112795
DOA0120699: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-117-6394
Access Cover

151176394
142507928: RNCC: 3 | RNVC: 2

4 Jan 1994

5340-15-149-8838
Access Cover

151498838
D0A019807: RNCC: 3 | RNVC: 2

22 Jul 1999

5340-15-178-9506
Mounting Bracket

151789506
AG018MD003AA00: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-15-074-3991
Retaining Strap

150743991
5UNI2137: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-118-3618
Angle Bracket

151183618
60141393: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-118-3852
Mending Plate

151183852
60166239: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-105-4412
Handle Grip

151054412
578075: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-162-5498
Compression Cup

151625498
4152460: RNCC: 3 | RNVC: 2

25 Sep 2001

5340-15-204-9777
Snap Hook

152049777
71500NNX2KK: RNCC: 3 | RNVC: 2
(241)A474771500NNX2KK: RNCC: 5 | RNVC: 2

7 Feb 2012

5340-15-156-2697
Angle Bracket

151562697
04010120200: RNCC: 3 | RNVC: 2
(241)A977204010120200: RNCC: 5 | RNVC: 2

20 Dec 2002

5340-15-059-9147
Access Door Hinge

150599147
N83508T19818: RNCC: 3 | RNVC: 2

23 Oct 1976

5340-15-122-2650
Mounting Bracket

151222650
800037599: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-153-2592
Handle Grip

151532592
122606449: RNCC: 2 | RNVC: 3
PL35BM10: RNCC: 5 | RNVC: 3

12 Dec 2000

5340-15-179-9900
Access Cover

151799900
2990200: RNCC: 3 | RNVC: 2

16 Nov 2007

5340-15-105-8403
Retaining Band

151058403
2471-22: RNCC: 3 | RNVC: 2
(241)AD7512471-22: RNCC: 5 | RNVC: 2
2471-22: RNCC: 5 | RNVC: 2

30 May 1989

5340-15-009-2101
Rod End Clevis

150092101
1384922: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-200-5434
Rim Lock Set

152005434
5340T72002812: RNCC: 3 | RNVC: 2

30 Jan 2006

5340-15-062-5365
Retaining Strap

150625365
168236 E: RNCC: 3 | RNVC: 2

1 May 1977

5340-15-179-9908
Mounting Plate

151799908
C4580.0000: RNCC: 3 | RNVC: 2
(241)A0069C4580.0000: RNCC: 5 | RNVC: 2

16 Nov 2007

5340-15-179-6880
Block Clamp

151796880
0000500401633: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-121-5402
Access Cover

151215402
132506012: RNCC: 3 | RNVC: 2

15 Jan 1996

5340-15-102-7280
Rod End Clevis

151027280
1576-06-431: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-148-6467
Mending Plate

151486467
190516220: RNCC: 3 | RNVC: 2

17 Sep 1998

5340-15-204-3480
Snap Hook

152043480
25100076: RNCC: 3 | RNVC: 2
(241)ACA6425100076: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-109-7471
Retaining Strap

151097471
60125265: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-179-7075
Bow Handle

151797075
0000500411616: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-063-2811
Retaining Strap

150632811
60109159: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-161-0323
Coat And Hat Hook

151610323
F710164111: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-178-6342
Mounting Plate

151786342
29846499: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-008-4551
Hand Crank

150084551
AX2229: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-007-3000
Runner

150073000
9478254: RNCC: 3 | RNVC: 2

7 Jan 2014

5340-15-063-3251
Retaining Strap

150633251
60112072: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-148-6388
Angle Bracket

151486388
190509319: RNCC: 3 | RNVC: 2

17 Sep 1998

5340-15-189-2824
Access Cover

151892824
D8406450: RNCC: 3 | RNVC: 2

10 Feb 2010

5340-15-074-3940
Retaining Strap

150743940
B24UNAV1046A37UN1743CD: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-154-0623
Angle Bracket

151540623
07-10-1071-19: RNCC: 3 | RNVC: 2

19 Mar 2001

5340-15-179-8773
Mounting Bracket

151798773
C7258W28B1.01: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-001-1101
Mounting Bracket

150011101
5801359813: RNCC: 3 | RNVC: 2

31 May 2013

5340-15-122-5851
Handle Grip

151225851
82.23.132: RNCC: 3 | RNVC: 2

10 Sep 1996

5340-15-151-5494
Mounting Bracket

151515494
960792: RNCC: 3 | RNVC: 2

7 Jun 2000

5340-15-157-6740
Loop Clamp

151576740
11031921: RNCC: 3 | RNVC: 2
(241)A977211031921: RNCC: 5 | RNVC: 2

15 Oct 2003

5340-15-100-7623
Door Handle

151007623
109-0323-27-4: RNCC: 3 | RNVC: 2

24 Nov 1986

5340-15-004-8281
Rod End Clevis

150048281
A1-10304-751: RNCC: 3 | RNVC: 2
A1-10304-751: RNCC: 5 | RNVC: 9

10 Apr 1978

5340-15-120-3277
Mending Plate

151203277
92300150244: RNCC: 3 | RNVC: 2
93158600: RNCC: 5 | RNVC: 2

30 Mar 1995

5340-15-062-3490
Screw Thread Insert

150623490
729086-1: RNCC: 3 | RNVC: 2

1 Mar 1982

5340-15-203-9563
Plain Solid Disk

152039563
56698003A8: RNCC: 3 | RNVC: 2
(241)A486756698003A8: RNCC: 5 | RNVC: 2

29 Jul 2011

5340-15-113-9429
Cushioning Pad

151139429
(241)A3649054104/2: RNCC: 3 | RNVC: 2
054104/2: RNCC: 3 | RNVC: 2
84.185.851/2: RNCC: 3 | RNVC: 2

7 Aug 1993

5340-15-110-6821
Loop Clamp

151106821
4150110: RNCC: 3 | RNVC: 2

9 Jan 1990

5340-15-178-7487
Mounting Bracket

151787487
041740: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-005-1944
Retaining Clip

150051944
14579380: RNCC: 3 | RNVC: 2
14579380: RNCC: 5 | RNVC: 2
14579380: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-179-7205
Angle Bracket

151797205
00185186: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-003-3471
Mounting Bracket

150033471
182724359: RNCC: 3 | RNVC: 2
(241)A0199182724359: RNCC: 5 | RNVC: 2

4 Nov 2013

5340-15-106-9668
Angle Bracket

151069668
4617086: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-062-7261
Angle Bracket

150627261
1141-31-106: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-156-6338
Mounting Bracket

151566338
UMM1125-SOSTEGNO: RNCC: 3 | RNVC: 2

3 Mar 2003

5340-15-119-7159
Angle Bracket

151197159
60173019: RNCC: 3 | RNVC: 2

8 Nov 1994

5340-15-112-0311
Butt Hinge Leaf

151120311
26-1-91-07: RNCC: 3 | RNVC: 2

19 Feb 1991

5340-15-205-3982
Mounting Bracket

152053982
5017-671: RNCC: 3 | RNVC: 2
(241)ABA635017-671: RNCC: 5 | RNVC: 2

7 Mar 2012

5340-15-120-7212
Hand Crank

151207212
555916010000: RNCC: 3 | RNVC: 2
559-16-0100: RNCC: 3 | RNVC: 2

27 Jan 2004

5340-15-178-4824
Access Cover

151784824
98472303: RNCC: 3 | RNVC: 2
A120007-000: RNCC: 5 | RNVC: 2

1 Jul 2005

5340-15-120-4524
Access Cover

151204524
142505128: RNCC: 3 | RNVC: 2

25 May 1995

5340-15-109-1790
Retaining Strap

151091790
1395123: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-108-4471
Angle Bracket

151084471
345A3353-001: RNCC: 3 | RNVC: 2

19 Jul 1989

5340-15-180-0584
Bail Handle

151800584
015.066: RNCC: 3 | RNVC: 2
AI-6208: RNCC: 5 | RNVC: 2

19 Dec 2007

5340-15-133-5306
Angle Bracket

151335306
32-31-076-0: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-068-3430
Door Handle

150683430
RS 300 588 BU: RNCC: 3 | RNVC: 2

27 Oct 1984

5340-15-178-5501
Access Cover

151785501
2009.090.0108: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-109-1237
Plug Button

151091237
14591787: RNCC: 3 | RNVC: 2
14591787: RNCC: 5 | RNVC: 2

30 Apr 1988

5340-15-127-6733
Angle Bracket

151276733
976694: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-199-4733
Angle Bracket

151994733
1S 611779: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-15-120-3560
Angle Bracket

151203560
60175855: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-162-2539
Mounting Plate

151622539
118975: RNCC: 3 | RNVC: 2
U2425943: RNCC: 5 | RNVC: 2

17 May 2001

5340-15-153-4305
Stand Base

151534305
308-0941/27: RNCC: 3 | RNVC: 2

22 Jan 2001

5340-15-070-9443
Retaining Strap

150709443
F333A6C62: RNCC: 3 | RNVC: 2
F333A6C-62: RNCC: 5 | RNVC: 2
F333A6C-62: RNCC: 5 | RNVC: 2

1 Mar 1978

5340-15-009-7410
Lock-Release Lever

150097410
1236-22-114: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-001-1104
Mounting Bracket

150011104
5801359824: RNCC: 3 | RNVC: 2

31 May 2013

5340-15-179-9600
Butt Hinge Leaf

151799600
11.072.A: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-121-5472
Angle Bracket

151215472
129-0101-48-103: RNCC: 3 | RNVC: 2

16 Jan 1996

5340-15-059-3572
Retaining Strap

150593572
1127-32-271: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-045-3225
Handle Grip

150453225
521-12-01-01: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-109-0847
Angle Bracket

151090847
60137837: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-123-1005
Angle Bracket

151231005
8572965: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-151-4771
Angle Bracket

151514771
0-168454: RNCC: 3 | RNVC: 2
(241)A39630-168454: RNCC: 5 | RNVC: 2
1PA39630-168454: RNCC: 5 | RNVC: 2

30 May 2000

5340-15-193-5334
Retaining Band

151935334
UA29022-06P: RNCC: 3 | RNVC: 2
(241)A2142UA29022-06P: RNCC: 5 | RNVC: 2

28 May 2010

5340-15-103-0952
Butt Hinge

151030952
DE013.13.382: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-103-4302
Spring Holder

151034302
274183ART6: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-198-6932
Loop Clamp

151986932
79083847: RNCC: 3 | RNVC: 2
(241)AE19279083847: RNCC: 5 | RNVC: 2
79083847: RNCC: 5 | RNVC: 2

3 Nov 2004

5340-15-127-7194
Handle Grip

151277194
5431-16: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-147-0811
Strap Hinge

151470811
51256: RNCC: 3 | RNVC: 2

21 Aug 1997

5340-15-153-3928
Mending Plate

151533928
5137-330-06: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-197-1761
Rim Lock Set

151971761
PN UAS 00014844: RNCC: 3 | RNVC: 2
5340F76017845: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-001-7882
Mounting Bracket

150017882
500437794: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-207-4131
Loop Clamp

152074131
NS4F011-2A: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-15-202-3762
Caster Wheel

152023762
T474-00002-000: RNCC: 3 | RNVC: 2

5 Mar 2007

5340-15-151-0895
Retaining Clip

151510895
Y0150: RNCC: 3 | RNVC: 2
Y0150: RNCC: 5 | RNVC: 2
(7001)5340151510895: RNCC: 5 | RNVC: 2
03-633-A-51: RNCC: 5 | RNVC: 2

20 Mar 2000

5340-15-050-8426
Butt Hinge

150508426
A15X75T58595-36: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-152-2471
Access Cover

151522471
2272-300: RNCC: 3 | RNVC: 2

17 Aug 2000

5340-15-089-2009
Rod End Clevis

150892009
1304-3-37: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-181-1889
Loop Clamp

151811889
4150035: RNCC: 3 | RNVC: 2

12 Nov 2008

5340-15-151-4217
Loop Clamp

151514217
0-121859: RNCC: 3 | RNVC: 2
(241)A39630-121859: RNCC: 5 | RNVC: 2
1PA39630-121859: RNCC: 5 | RNVC: 2

24 May 2000

5340-15-152-3242
Loop Clamp

151523242
0-106588: RNCC: 3 | RNVC: 2
1PA39630-106588: RNCC: 5 | RNVC: 2
(241)A39630-106588: RNCC: 5 | RNVC: 2

31 Aug 2000

5340-15-068-4077
Access Door Hinge

150684077
4-24108-800-72052B2: RNCC: 3 | RNVC: 2

9 Jun 1986

5340-15-206-8902
Threaded Rod End

152068902
M004-01H007-045: RNCC: 3 | RNVC: 2

24 Jul 2012

5340-15-113-9682
Padlock Eye

151139682
216A1121-001: RNCC: 3 | RNVC: 2

31 Mar 1992

5340-15-108-0773
Access Cover

151080773
32-03-299: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-059-5040
Rod End Clevis

150595040
12-44-28-00: RNCC: 3 | RNVC: 2

10 Apr 1975

5340-15-186-9842
Strapping

151869842
0000042557447: RNCC: 3 | RNVC: 2
42557447: RNCC: 3 | RNVC: 2

16 Jan 2009

5340-15-002-2764
Mounting Bracket

150022764
504380630: RNCC: 3 | RNVC: 2

2 Aug 2013

5340-15-005-0522
Angle Bracket

150050522
0-33391: RNCC: 3 | RNVC: 2

7 Sep 1977

5340-15-055-7746
Angle Bracket

150557746
50041029-1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-122-2497
Mounting Bracket

151222497
80A074426: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-202-4466
Luggage Handle

152024466
0370/3: RNCC: 3 | RNVC: 2
(241)A52000370/3: RNCC: 5 | RNVC: 2

25 Mar 2007

5340-15-163-3763
Bridge Clamp

151633763
9435905: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-107-6090
Butt Hinge Leaf

151076090
A72322-01-20: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-007-4965
Rod End Clevis

150074965
1139-02-122: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-148-3529
Mending Plate

151483529
154558: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-160-5760
Angle Bracket

151605760
F720104311: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-063-9374
Bridge Clamp

150639374
1213-25-128: RNCC: 3 | RNVC: 2
5340-10165: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-153-3909
Mending Plate

151533909
5137-320-05: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-009-2476
Angle Bracket

150092476
P-882599-002: RNCC: 3 | RNVC: 2

2 Sep 1980

5340-15-150-0888
Mounting Bracket

151500888
016020128: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-062-9070
Angle Bracket

150629070
0-55750: RNCC: 3 | RNVC: 2

28 Aug 1981

5340-15-153-7391
Mounting Bracket

151537391
142058180: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-122-2864
Mounting Bracket

151222864
800068512: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-151-5427
Filler Opening Cap

151515427
008198023: RNCC: 3 | RNVC: 2
00112130: RNCC: 4 | RNVC: 1
(241)A39630-112130: RNCC: 5 | RNVC: 2
(241)A396300112130: RNCC: 5 | RNVC: 2
0-112130: RNCC: 5 | RNVC: 2
1PA39630-112130: RNCC: 5 | RNVC: 2

6 Jun 2000

5340-15-153-9594
Loop Clamp

151539594
M12/22UNI9209ACC.INOX-ZN: RNCC: 3 | RNVC: 2
230026519: RNCC: 5 | RNVC: 2

12 Mar 2001

5340-15-006-8941
Rod End Clevis

150068941
39A506-31-30-01B: RNCC: 3 | RNVC: 2

2 Jan 1979

5340-15-100-7626
Door Handle

151007626
109-0323-27-6: RNCC: 3 | RNVC: 2

24 Nov 1986

5340-15-152-5805
Mounting Bracket

151525805
FG235-37-07: RNCC: 3 | RNVC: 2

27 Sep 2000

5340-15-060-7442
Butt Hinge

150607442
F400C1D3-25: RNCC: 3 | RNVC: 2
F400C1D3-25: RNCC: 5 | RNVC: 2

20 May 1977

5340-15-114-7189
Spring Tension Clip

151147189
(7001)5340151147189: RNCC: 3 | RNVC: 2
54047: RNCC: 3 | RNVC: 2
03-619-A-46: RNCC: 3 | RNVC: 2

29 Jul 1992

5340-15-194-3405
Filler Opening Cap

151943405
TAP90R10A0C1: RNCC: 3 | RNVC: 2
E15510: RNCC: 5 | RNVC: 2

4 Nov 2010

5340-15-121-0614
Screw Thread Insert

151210614
M2.5(X0.45)X1D-ACC.INOX18/8AUST-: RNCC: 3 | RNVC: 1
210602500: RNCC: 5 | RNVC: 2

21 Sep 1995

5340-15-101-4244
Rod End Clevis

151014244
1576-08-207: RNCC: 3 | RNVC: 2
157608207: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-151-5323
Butt Hinge

151515323
0-103528: RNCC: 3 | RNVC: 2
(241)A39630-103528: RNCC: 5 | RNVC: 2

6 Jun 2000

5340-15-120-6638
Handle Grip

151206638
M180/100-8X8 B: RNCC: 3 | RNVC: 2

28 Jun 1996

5340-15-061-9697
Retaining Strap

150619697
587340121G: RNCC: 3 | RNVC: 2
M.1384: RNCC: 5 | RNVC: 2

22 Jun 1984

5340-15-119-5680
Mending Plate

151195680
4881322: RNCC: 3 | RNVC: 2

19 Sep 1994

5340-15-179-7172
Mounting Bracket

151797172
00180061: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-150-8887
Mounting Bracket

151508887
00011616: RNCC: 3 | RNVC: 2

3 Feb 2000

5340-15-105-8969
Spring Tension Clip

151058969
5/2792: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-062-7941
Angle Bracket

150627941
0-34193: RNCC: 3 | RNVC: 2

28 Aug 1982

5340-15-120-3431
Handle Grip

151203431
60176844: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-157-1795
Loop Clamp

151571795
A071A020NB: RNCC: 3 | RNVC: 2

15 May 2003

5340-15-179-9553
Mounting Plate

151799553
00157271: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-101-1354
Loop Clamp

151011354
129802: RNCC: 3 | RNVC: 2

8 Dec 1983

5340-15-147-3664
Access Cover

151473664
999-0500-44-306: RNCC: 3 | RNVC: 2

31 Oct 1997

5340-15-112-3542
Strap Hinge

151123542
60150813: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-065-6528
Retaining Clip

150656528
19.74.03.01: RNCC: 3 | RNVC: 2

18 Mar 1985

5340-15-109-1958
Spring Holder

151091958
4223323: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-122-0937
Screw Thread Insert

151220937
529N1010303: RNCC: 3 | RNVC: 2
529N1010303: RNCC: 5 | RNVC: 9

30 Apr 1996

5340-15-118-8258
Access Cover

151188258
9448960: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-118-4511
Handle Grip

151184511
60150336: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-151-0993
Retaining Clip

151510993
Y0085: RNCC: 3 | RNVC: 2
Y0085: RNCC: 5 | RNVC: 2
(7001)5340151510993: RNCC: 5 | RNVC: 2
03-633-D-25: RNCC: 5 | RNVC: 2

20 Mar 2000

5340-15-153-3994
Mounting Plate

151533994
5143-242-02: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-045-0322
Rod End Clevis

150450322
576-12-01-02: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-112-3507
Loop Clamp

151123507
12118871: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-122-3898
Angle Bracket

151223898
D1403034: RNCC: 3 | RNVC: 2

20 Jun 2000

5340-15-152-2199
Mending Plate

151522199
42531936: RNCC: 3 | RNVC: 2

10 Aug 2000

5340-15-119-1503
Mending Plate

151191503
73126191: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-118-8607
Access Cover

151188607
299709168M: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-118-6999
Angle Bracket

151186999
73128618: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-118-7044
Mounting Bracket

151187044
73131023: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-118-4013
Angle Bracket

151184013
60159750: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-100-7629
Access Door Hinge

151007629
109-0640-49-31: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-15-001-8411
Bow Handle

150018411
5949790784: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-056-5955
Retaining Ring

150565955
13994: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-148-3482
Angle Bracket

151483482
102767: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-155-1109
Retaining Strap

151551109
142025251: RNCC: 3 | RNVC: 2

18 Jan 2002

5340-15-153-4136
Mounting Bracket

151534136
SC 300 743 CA: RNCC: 3 | RNVC: 2

16 Jan 2001

5340-15-119-1252
Mounting Bracket

151191252
73121529: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-179-9897
Strap Hinge

151799897
9572100: RNCC: 3 | RNVC: 2

16 Nov 2007

5340-15-001-8210
Mounting Bracket

150018210
5949782746: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-108-4231
Loop Clamp

151084231
12174990: RNCC: 3 | RNVC: 2

5 Jan 1989

5340-15-201-3017
Stand Base

152013017
122650309: RNCC: 3 | RNVC: 2

20 Jul 2006

5340-15-201-9977
Mounting Bracket

152019977
0099-A-S01: RNCC: 3 | RNVC: 2

21 Jan 2007

5340-15-051-3151
Expansion Plug

150513151
1-01592-00: RNCC: 3 | RNVC: 2
10159201: RNCC: 5 | RNVC: 2
10159200: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-150-9803
Hook Handle

151509803
369-09098-106: RNCC: 3 | RNVC: 2

17 Feb 2000

5340-15-194-3768
Mounting Bracket

151943768
109-0860-16-109: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-15-148-4622
Caster Wheel

151484622
030164: RNCC: 3 | RNVC: 2

13 Aug 1998

5340-15-109-4868
Angle Bracket

151094868
1Q 546356: RNCC: 3 | RNVC: 2
1Q 546356: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-112-3474
Retaining Strap

151123474
9067198: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-064-3721
Retaining Strap

150643721
1398312: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-148-3557
Angle Bracket

151483557
154859: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-195-8235
Access Cover

151958235
20132091A: RNCC: 3 | RNVC: 2
(241)A361820132091A: RNCC: 5 | RNVC: 2

17 May 2011

5340-15-195-1688
Handle Grip

151951688
4F15160N: RNCC: 3 | RNVC: 2

4 Mar 2011

5340-15-207-0101
Turnbuckle Body

152070101
3031T37P05: RNCC: 3 | RNVC: 2
(241)A34603031T37P05: RNCC: 5 | RNVC: 2

8 Aug 2012

5340-15-146-7304
Threaded Rod End

151467304
SF-6.45: RNCC: 3 | RNVC: 2

18 Aug 1997

5340-15-052-0721
Retaining Band

150520721
169-8B: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-120-4511
Angle Bracket

151204511
142502433: RNCC: 3 | RNVC: 2

25 May 1995

5340-15-000-4337
Retaining Band

150004337
4260048280N: RNCC: 3 | RNVC: 2

1 Mar 2013

5340-15-163-3872
Bridge Clamp

151633872
9464758: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-155-8211
Angle Bracket

151558211
BN169: RNCC: 3 | RNVC: 2
42536889: RNCC: 3 | RNVC: 2

10 Jul 2002

5340-15-057-9816
Access Door Hinge

150579816
A1-23507-001: RNCC: 3 | RNVC: 2
A1-23507-001: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-059-8827
Rod End Clevis

150598827
62698-101A1: RNCC: 3 | RNVC: 2

15 Sep 1976

5340-15-064-3747
Catch Strike

150643747
4723937: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-151-6682
Bridge Clamp

151516682
4469040: RNCC: 3 | RNVC: 2

22 Jun 2000

5340-15-147-4158
Mending Plate

151474158
3210004600: RNCC: 3 | RNVC: 2

18 Nov 1997

5340-15-131-6833
Angle Bracket

151316833
10652: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-063-7444
Plain Solid Disk

150637444
40.60.01.350: RNCC: 3 | RNVC: 2
19.32.76.01: RNCC: 5 | RNVC: 2

20 May 1983

5340-15-148-5215
Hook Handle

151485215
98473912: RNCC: 3 | RNVC: 2

13 Aug 1999

5340-15-121-2674
Metal Grille

151212674
0390700001: RNCC: 3 | RNVC: 2

7 Nov 1995

5340-15-065-8577
Loop Clamp

150658577
50.45.005.0: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-068-6408
Plain Solid Disk

150686408
W 006657: RNCC: 3 | RNVC: 2
(7001)5340150686408: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-188-2675
Mounting Bracket

151882675
D1401617: RNCC: 3 | RNVC: 2

31 Aug 2009

5340-15-118-4428
Angle Bracket

151184428
60155696: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-002-6265
Bail Handle

150026265
E00617: RNCC: 3 | RNVC: 2

9 Sep 2013

5340-15-119-1310
Angle Bracket

151191310
73123537: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-195-8577
Mounting Bracket

151958577
A9066920289: RNCC: 3 | RNVC: 2
(241)AJ611A9066920289: RNCC: 5 | RNVC: 2

23 May 2011

5340-15-058-7715
Rod End Clevis

150587715
205-6-111: RNCC: 3 | RNVC: 2
205-6-111: RNCC: 5 | RNVC: 9

17 Apr 1975

5340-15-112-6762
Access Cover

151126762
MC318-6-614/E: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-068-6895
Angle Bracket

150686895
2-15759-101-73252A1: RNCC: 3 | RNVC: 2
2-15759-101-73252A1: RNCC: 5 | RNVC: 2
2-15759-101-73252A1: RNCC: 5 | RNVC: 9

28 Oct 1986

5340-15-149-8724
Access Cover

151498724
3594GR82: RNCC: 3 | RNVC: 2
3594GR82: RNCC: 5 | RNVC: 9

16 Jun 1999

5340-15-050-3588
Angle Bracket

150503588
707316B: RNCC: 3 | RNVC: 2
T2S96: RNCC: 5 | RNVC: 2

31 Dec 1975

5340-15-106-9674
Angle Bracket

151069674
1350618: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-158-5749
Clamping Catch

151585749
122505265: RNCC: 3 | RNVC: 2

9 Mar 2004

5340-15-001-8146
Mounting Plate

150018146
99478478: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-108-5129
Plug Button

151085129
4329768: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-153-5173
Access Cover

151535173
142010846: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-179-7157
Loop Clamp

151797157
0000500401840: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-118-4584
Loop Clamp

151184584
60153137: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-116-2305
Screw Thread Insert

151162305
M3(X0,5)X1D: RNCC: 3 | RNVC: 2
210602501: RNCC: 5 | RNVC: 2

19 May 1999

5340-15-119-5487
Loop Clamp

151195487
4791489: RNCC: 3 | RNVC: 2

19 Sep 1994

5340-15-204-8176
Loop Clamp

152048176
10129: RNCC: 3 | RNVC: 2
(241)A101110129: RNCC: 5 | RNVC: 2

11 Jan 2012

5340-15-062-7905
Retaining Strap

150627905
0-34154: RNCC: 3 | RNVC: 2

28 Aug 1982

5340-15-105-4421
Handle Grip

151054421
14110: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-116-4799
Angle Bracket

151164799
60165513: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-120-3532
Loop Clamp

151203532
17315290: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-177-3996
Mounting Bracket

151773996
040423: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-195-6011
Mounting Bracket

151956011
A8190230: RNCC: 3 | RNVC: 2
(241)A9217A8190230: RNCC: 5 | RNVC: 2

8 Apr 2011

5340-15-120-3468
Butt Hinge

151203468
60176184: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-105-2826
Screw Thread Insert

151052826
8061: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-113-0093
Retaining Strap

151130093
44999200000: RNCC: 3 | RNVC: 2
93155433: RNCC: 5 | RNVC: 2

23 Feb 1989

5340-15-003-7282
Turnbuckle Body

150037282
51718041: RNCC: 3 | RNVC: 2
(241)A293051718041: RNCC: 5 | RNVC: 2

19 Nov 2013

5340-15-003-3719
Access Cover

150033719
0152.110.003.00: RNCC: 3 | RNVC: 2

5 Nov 2013

5340-15-178-7586
Mounting Bracket

151787586
004159AA: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-116-8445
Handle Grip

151168445
S 203: RNCC: 3 | RNVC: 2
D0569872: RNCC: 5 | RNVC: 2

24 Jan 1994

5340-15-177-3422
Loop Clamp

151773422
98490783: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-003-7545
Mounting Bracket

150037545
00065: RNCC: 3 | RNVC: 2

20 Nov 2013

5340-15-194-2177
Mounting Bracket

151942177
TP1J1410A: RNCC: 3 | RNVC: 2
(241)S5652TP1J1410A: RNCC: 5 | RNVC: 2

7 Oct 2010

5340-15-122-0547
Mounting Bracket

151220547
60173918: RNCC: 3 | RNVC: 2

23 Apr 1996

5340-15-007-3005
Shelf Bracket

150073005
500410109: RNCC: 3 | RNVC: 2

7 Jan 2014

5340-15-000-4813
Pipe Hanger

150004813
71418725: RNCC: 3 | RNVC: 2
71418725: RNCC: 5 | RNVC: 2

11 Mar 2013

5340-15-178-5500
Mounting Plate

151785500
2231.029.0003: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-202-8447
Mounting Bracket

152028447
9.3040.0391.A: RNCC: 3 | RNVC: 2
(241)A92169.3040.0391.A: RNCC: 5 | RNVC: 2

23 Jul 2007

5340-15-179-6866
Mounting Plate

151796866
00183407: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-127-5049
Angle Bracket

151275049
867890: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-156-3072
Stand Base

151563072
CODE 16: RNCC: 3 | RNVC: 2
241A7063CODE 16: RNCC: 4 | RNVC: 1

17 Jan 2003

5340-15-040-2392
Angle Bracket

150402392
2-4751-101-24091-5: RNCC: 3 | RNVC: 2
2-4751-1-01-24091-5: RNCC: 5 | RNVC: 2

29 Sep 1975

5340-15-005-3705
Loop Clamp

150053705
1-34180-08: RNCC: 3 | RNVC: 2
1-34180-08: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-074-3999
Retaining Strap

150743999
4UNI2138: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-148-3554
Angle Bracket

151483554
150699: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-109-4612
Angle Bracket

151094612
1S 532153: RNCC: 3 | RNVC: 2
1S 532153: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-108-6343
Spring Tension Clip

151086343
60136155: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-110-1996
Access Cover

151101996
DOR0112647: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-168-9989
Coat And Hat Hook

151689989
F72004634: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-187-8213
Mounting Bracket

151878213
018.066.00.48: RNCC: 3 | RNVC: 2
(241)A6479018.066.00.48: RNCC: 5 | RNVC: 2
018.066.00.48: RNCC: 5 | RNVC: 2

7 May 2009

5340-15-151-5561
Mounting Bracket

151515561
990157: RNCC: 3 | RNVC: 2

7 Jun 2000

5340-15-101-9062
Spring Holder

151019062
D520312: RNCC: 3 | RNVC: 2
D520312: RNCC: 5 | RNVC: 9

25 Nov 1992

5340-15-194-0107
Mounting Bracket

151940107
79086238: RNCC: 3 | RNVC: 2

12 Aug 2010

5340-15-109-3714
Mending Plate

151093714
5137-292-14: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-112-3490
Angle Bracket

151123490
60148796: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-118-3625
Angle Bracket

151183625
60140989: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-201-1398
Permanent Magnet

152011398
385-013-011: RNCC: 3 | RNVC: 2

6 Jun 2006

5340-15-068-9701
Lock-Release Lever

150689701
32-08-173: RNCC: 3 | RNVC: 2

9 Jun 1986

5340-15-118-2043
Screw Thread Insert

151182043
13582471: RNCC: 3 | RNVC: 2

22 Apr 1994

5340-15-008-1861
Retaining Band

150081861
60114835: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-153-5242
Access Cover

151535242
142076937: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-101-0245
Leather Strap

151010245
888200132: RNCC: 3 | RNVC: 2

22 Apr 1987

5340-15-103-6811
Tubular Fairlead

151036811
24009495A: RNCC: 3 | RNVC: 2

26 Nov 1987

5340-15-148-5193
Handle Ferrule

151485193
98407515: RNCC: 3 | RNVC: 2

13 Aug 1999

5340-15-136-9122
Handle Grip

151369122
MS26518-1: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-117-9759
Angle Bracket

151179759
145507109: RNCC: 3 | RNVC: 2

22 Feb 1994

5340-15-142-9158
Vent Plug

151429158
478620: RNCC: 3 | RNVC: 2

22 Oct 1996

5340-15-114-1117
Friction Catch

151141117
186609: RNCC: 3 | RNVC: 2

29 Apr 1992

5340-15-178-7650
Mounting Bracket

151787650
040100: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-156-3699
Mounting Bracket

151563699
(241)A3460CBD71330P02: RNCC: 3 | RNVC: 2
CBD71330P02: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-109-0157
Catch Strike

151090157
1358700: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-007-2047
Angle Bracket

150072047
1389188: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-154-3949
Protection Bellows

151543949
1001519903: RNCC: 3 | RNVC: 2
(241)AD75121222239: RNCC: 5 | RNVC: 2
21222239: RNCC: 5 | RNVC: 2
(241)A97721001519903: RNCC: 5 | RNVC: 2

22 May 2001

5340-15-186-9542
Handwheel

151869542
71-203609A: RNCC: 3 | RNVC: 2
(241)A0199178909166: RNCC: 5 | RNVC: 2
178909166: RNCC: 5 | RNVC: 2

9 Jan 2009

5340-15-055-9630
Retaining Strap

150559630
10UNI2134A34-2633CDCR: RNCC: 2 | RNVC: 2
2400-32-965: RNCC: 5 | RNVC: 2
240032965: RNCC: 5 | RNVC: 2

26 Jun 1978

5340-15-156-2767
Filler Opening Cap

151562767
00141521: RNCC: 3 | RNVC: 2
(241)A396300141521: RNCC: 5 | RNVC: 2
1PA396300141521: RNCC: 5 | RNVC: 2

13 Jan 2003

5340-15-122-3026
Protection Bellows

151223026
73130892: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-152-7992
Mounting Plate

151527992
P200614: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-194-7822
Mending Plate

151947822
50191: RNCC: 3 | RNVC: 2
(241)A348850191: RNCC: 5 | RNVC: 2

14 Jan 2011

5340-15-153-2875
Clamping Catch

151532875
TIPO NF: RNCC: 2 | RNVC: 3
122505268: RNCC: 5 | RNVC: 3

13 Dec 2000

5340-15-119-7767
Mechanical Stop

151197767
9422920: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-194-7389
Dashpot

151947389
VV0009: RNCC: 3 | RNVC: 2
(241)AJ348VV0009: RNCC: 5 | RNVC: 2

12 Jan 2011

5340-15-121-7494
Handle Grip

151217494
7405D: RNCC: 3 | RNVC: 2

14 Feb 1996

5340-15-118-3847
Loop Clamp

151183847
60164078: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-063-2825
Retaining Strap

150632825
60110055: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-002-1627
Protection Bellows

150021627
5801324684: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-118-4505
Angle Bracket

151184505
60147774: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-117-5877
Mounting Bracket

151175877
412563: RNCC: 3 | RNVC: 2

1 Dec 1993

5340-15-101-8487
Rod End Clevis

151018487
SF205-6-167-11: RNCC: 3 | RNVC: 2
SF205-6-167-11: RNCC: 5 | RNVC: 9

14 Dec 1987

5340-15-100-9262
Butt Hinge Leaf

151009262
808-41091-8: RNCC: 3 | RNVC: 2

1 May 1987

5340-15-179-0679
Mounting Bracket

151790679
C155613-1: RNCC: 3 | RNVC: 2

20 Apr 2006

5340-15-187-4622
Flush Lock

151874622
258-5272: RNCC: 3 | RNVC: 2
(241)AA136258-5272: RNCC: 5 | RNVC: 2

2 Apr 2009

5340-15-120-3279
Mending Plate

151203279
709363-10: RNCC: 3 | RNVC: 2
709367-10: RNCC: 3 | RNVC: 2
8196779: RNCC: 5 | RNVC: 2
709363-10: RNCC: 5 | RNVC: 9
709367-10: RNCC: 5 | RNVC: 9

30 Mar 1995

5340-15-199-1274
Block Clamp

151991274
AIT13901GE3537: RNCC: 3 | RNVC: 2

17 Jan 2005

5340-15-119-9098
Angle Bracket

151199098
180504114: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-118-3844
Loop Clamp

151183844
60158737: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-188-6046
Mounting Bracket

151886046
307359: RNCC: 3 | RNVC: 2

13 Oct 2009

5340-15-109-5062
Screw Thread Insert

151095062
13582271: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-063-3540
Angle Bracket

150633540
60125014: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-160-8571
Coat And Hat Hook

151608571
F720150011: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-045-2856
Loop Clamp

150452856
N0R2-505-06-12B: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-180-0004
Rod End Clevis

151800004
4512: RNCC: 3 | RNVC: 2

16 Nov 2007

5340-15-119-0170
Catch Strike

151190170
70653821: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-153-2514
Loop Clamp

151532514
CFG1-12/12: RNCC: 2 | RNVC: 3
122530112: RNCC: 5 | RNVC: 3

12 Dec 2000

5340-15-058-6741
Recess Handle

150586741
1971-49-8FE42: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-063-3717
Angle Bracket

150633717
60109741: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-196-8964
Retaining Band

151968964
PN UAS 00047516: RNCC: 3 | RNVC: 2
4730F76037591: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-109-1856
Catch Strike

151091856
60109273: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-153-0381
Access Cover

151530381
1110.051: RNCC: 3 | RNVC: 2
1110.051: RNCC: 5 | RNVC: 2
58311E002001: RNCC: 5 | RNVC: 2

15 Nov 2000

5340-15-109-5058
Bow Handle

151095058
60144399: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-148-9826
Spring Tension Clip

151489826
555 47: RNCC: 3 | RNVC: 2
555 47: RNCC: 5 | RNVC: 9

9 Nov 1998

5340-15-118-7541
Mounting Bracket

151187541
9434559: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-057-4389
Retaining Band

150574389
204-9000-18-2: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-003-8941
Handle Grip

150038941
182703141: RNCC: 3 | RNVC: 2
(241)A0199182703141: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-005-4986
Angle Bracket

150054986
JJ71838: RNCC: 3 | RNVC: 2

9 Apr 1979

5340-15-199-5245
Butt Hinge

151995245
1779-55746: RNCC: 3 | RNVC: 2
(241)AF604CLABMEC014: RNCC: 5 | RNVC: 2
C-LAB-MEC-014: RNCC: 5 | RNVC: 2

14 Apr 2005

5340-15-007-3302
Handle Grip

150073302
1376-16-144: RNCC: 3 | RNVC: 2
137616144: RNCC: 5 | RNVC: 2

27 Oct 1979

5340-15-163-4020
Mounting Plate

151634020
9844682: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-109-2019
Mending Plate

151092019
4831138: RNCC: 3 | RNVC: 2

23 Feb 1989

5340-15-109-4749
Angle Bracket

151094749
1P 553030: RNCC: 3 | RNVC: 2
1P 553030: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-001-5810
Retaining Bail

150015810
42566654: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-177-4155
Access Door Hinge

151774155
046550: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-065-1279
Bow Handle

150651279
W006171A: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-058-4048
Leather Strap

150584048
553823141000: RNCC: 2 | RNVC: 3
538-23-1410: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-153-7244
Loop Clamp

151537244
142030121: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-178-3289
Mounting Bracket

151783289
185605969A01: RNCC: 3 | RNVC: 2

29 Apr 2005

5340-15-198-5733
Expansion Plug

151985733
11050408: RNCC: 3 | RNVC: 2
(241)A977211050408: RNCC: 5 | RNVC: 2

15 Oct 2004

5340-15-118-3997
Angle Bracket

151183997
60161387: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-178-9208
Retaining Strap

151789208
09390000420: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-15-187-7835
Access Cover

151877835
71487806: RNCC: 3 | RNVC: 2

6 May 2009

5340-15-117-1464
Access Cover

151171464
02731H110330: RNCC: 5 | RNVC: 2
T0063668: RNCC: 5 | RNVC: 2
02731H110330: RNCC: 5 | RNVC: 9

10 Aug 1993

5340-15-120-3557
Angle Bracket

151203557
60176189: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-119-1489
Retaining Strap

151191489
73126130: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-119-7705
Bow Handle

151197705
73137224: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-061-4179
Angle Bracket

150614179
P-135341-002: RNCC: 3 | RNVC: 2
P135341-002: RNCC: 5 | RNVC: 2

20 Jan 1978

5340-15-202-8821
Angle Bracket

152028821
A6122-94005-107: RNCC: 3 | RNVC: 2
(241)A0126A6122-94005-107: RNCC: 5 | RNVC: 2

13 Sep 2007

5340-15-118-3396
Loop Clamp

151183396
60142931: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-103-0394
Expansion Plug

151030394
79005599: RNCC: 3 | RNVC: 2

21 Jun 1987

5340-15-117-2596
Angle Bracket

151172596
132506985: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-15-117-1950
Angle Bracket

151171950
190512206: RNCC: 3 | RNVC: 2

2 Sep 1993

5340-15-111-2819
Access Cover

151112819
DOR0101104: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-119-1145
Access Cover

151191145
73107644: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-118-7291
Mending Plate

151187291
73127633: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-181-3682
Metal Grille

151813682
2C1144IS0018: RNCC: 3 | RNVC: 2
(241)A29802C1144IS0018: RNCC: 5 | RNVC: 2

10 Dec 2008

5340-15-193-9790
Door Handle

151939790
71407613: RNCC: 3 | RNVC: 2

10 Aug 2010

5340-15-059-3449
Retaining Strap

150593449
1127-36-254: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-108-9560
Angle Bracket

151089560
35780090: RNCC: 3 | RNVC: 2

25 May 1989

5340-15-112-0290
Filler Opening Cap

151120290
M11-000: RNCC: 3 | RNVC: 2

19 Feb 1991

5340-15-204-0551
Access Cover

152040551
504012048: RNCC: 3 | RNVC: 2
0054499: RNCC: 5 | RNVC: 2

23 Aug 2011

5340-15-157-6150
Angle Bracket

151576150
11031205: RNCC: 3 | RNVC: 2
(241)A977211031205: RNCC: 5 | RNVC: 2

9 Oct 2003

5340-15-189-2642
Access Cover

151892642
9903905084: RNCC: 3 | RNVC: 2
9903905084: RNCC: 5 | RNVC: 2

10 Feb 2010

5340-15-178-5520
Mounting Plate

151785520
2231.019.0003: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-074-3958
Retaining Strap

150743958
14UNI2134CD: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-074-3969
Retaining Strap

150743969
7UNI2135CD: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-074-3309
Retaining Strap

150743309
A20UNAV1046A37UN1743: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-111-7996
Angle Bracket

151117996
MF010230: RNCC: 3 | RNVC: 2

1 Jul 1990

5340-15-060-1452
Screw Thread Insert

150601452
1276-19-183: RNCC: 3 | RNVC: 2
127619183: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-062-7360
Webbing Strap

150627360
CL806.01: RNCC: 3 | RNVC: 2

29 Nov 1980

5340-15-148-3559
Angle Bracket

151483559
159016: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-203-0098
Access Cover

152030098
635V03175-102: RNCC: 3 | RNVC: 2
(241)A3004635V03175-102: RNCC: 5 | RNVC: 2

8 Nov 2007

Load More Results