What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 10 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 10 of 72

5340-15-119-1448
Angle Bracket

151191448
73125807: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-120-3425
Retaining Band

151203425
14560180: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-119-5620
Plug Button

151195620
1231192: RNCC: 3 | RNVC: 2

19 Sep 1994

5340-15-200-3014
Clamping Catch

152003014
190509440: RNCC: 3 | RNVC: 2

29 Nov 2005

5340-15-121-0622
Screw Thread Insert

151210622
M6(X1)X1.5D: RNCC: 3 | RNVC: 2
210002625: RNCC: 5 | RNVC: 2

21 Sep 1995

5340-15-118-4040
Angle Bracket

151184040
60158355: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-000-4338
Retaining Band

150004338
4260048370N: RNCC: 3 | RNVC: 2

1 Mar 2013

5340-15-007-1885
Retaining Strap

150071885
1380775: RNCC: 3 | RNVC: 2
1380755: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-120-0859
Angle Bracket

151200859
60164961: RNCC: 3 | RNVC: 2

19 Dec 1994

5340-15-157-6651
Angle Bracket

151576651
11031614: RNCC: 3 | RNVC: 2
(241)A977211031614: RNCC: 5 | RNVC: 2

15 Oct 2003

5340-15-118-4031
Angle Bracket

151184031
60167029: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-009-6380
Mending Plate

150096380
185689P1: RNCC: 3 | RNVC: 2

17 Oct 1980

5340-15-203-0377
Retaining Band

152030377
033090083: RNCC: 3 | RNVC: 2
(241)A5009033090083: RNCC: 5 | RNVC: 2

19 Nov 2007

5340-15-119-7170
Angle Bracket

151197170
60173188: RNCC: 3 | RNVC: 2

8 Nov 1994

5340-15-145-1930
Swivel Caster

151451930
53-5406FITTEDAXLEBUSHFROM50-0206: RNCC: 3 | RNVC: 2
53-5406: RNCC: 5 | RNVC: 1
53-5406FITTEDAXLEBUSHFROM50-0206: RNCC: 5 | RNVC: 2
PRO-OB-SCB: RNCC: 5 | RNVC: 2

2 Jun 1997

5340-15-180-7912
Expansion Shield

151807912
420-3590: RNCC: 3 | RNVC: 2
(241)AA136420-3590: RNCC: 5 | RNVC: 2

23 Jul 2008

5340-15-007-5211
Rod End Clevis

150075211
1239-03-106: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-148-7172
Access Cover

151487172
231 01: RNCC: 3 | RNVC: 2
231 01: RNCC: 5 | RNVC: 9

28 Sep 1998

5340-15-007-4230
Angle Bracket

150074230
P-110256-003: RNCC: 3 | RNVC: 2
P110256-003: RNCC: 5 | RNVC: 2

12 Mar 1980

5340-15-122-2637
Mounting Plate

151222637
800035411: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-153-5246
Access Cover

151535246
142079911: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-150-1133
Access Cover

151501133
77300171: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-008-0700
Angle Bracket

150080700
60113128: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-020-2594
Loop Clamp

150202594
01-098-01-94: RNCC: 3 | RNVC: 2
55.41.078.A: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-116-2312
Screw Thread Insert

151162312
210002537: RNCC: 5 | RNVC: 2

7 Jul 2000

5340-15-119-7156
Angle Bracket

151197156
60172922: RNCC: 3 | RNVC: 2

8 Nov 1994

5340-15-117-8452
Retaining Strap

151178452
523089: RNCC: 3 | RNVC: 2
P009279956016000: RNCC: 5 | RNVC: 2

28 Jan 1994

5340-15-203-1468
Latch Bar

152031468
212-1300-38-3: RNCC: 3 | RNVC: 2

27 Nov 2007

5340-15-009-8860
Plain Solid Disk

150098860
1236-62-101: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-204-4418
Mounting Bracket

152044418
MTB/116402/001: RNCC: 3 | RNVC: 2

7 Nov 2011

5340-15-000-5510
Caster Wheel

150005510
13HJ04643228S01-801-046: RNCC: 3 | RNVC: 2

15 Mar 2013

5340-15-113-0542
Angle Bracket

151130542
FG138-36-11: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-194-1818
Mounting Bracket

151941818
210F503-7700-01: RNCC: 3 | RNVC: 2

29 Sep 2010

5340-15-147-5947
Spring Tension Clip

151475947
738362-10: RNCC: 3 | RNVC: 2
738362-10: RNCC: 5 | RNVC: 9

30 Dec 1997

5340-15-109-3976
Mending Plate

151093976
5137-309-26: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-007-2051
Angle Bracket

150072051
1388345: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-073-5628
Flush Lock

150735628
19890-035: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-061-5829
Spring Tension Clip

150615829
206-1031-01-1: RNCC: 3 | RNVC: 2

29 Nov 1977

5340-15-051-2511
Angle Bracket

150512511
TM492335-1287: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-008-4587
Plug Button

150084587
4434614: RNCC: 3 | RNVC: 2
4434614: RNCC: 5 | RNVC: 9

29 Sep 1980

5340-15-074-3959
Retaining Strap

150743959
16UNI2134CD: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-062-7904
Retaining Strap

150627904
0-34152: RNCC: 3 | RNVC: 2

28 Aug 1982

5340-15-003-9193
Blank Panel

150039193
182742018: RNCC: 3 | RNVC: 2
(241)A0199182742018: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-179-6750
Mounting Bracket

151796750
0000500413625: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-152-4876
Access Cover

151524876
60128899: RNCC: 3 | RNVC: 2

19 Sep 2000

5340-15-109-0037
Retaining Strap

151090037
1357150: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-063-9301
Expansion Plug

150639301
9-8990-05: RNCC: 3 | RNVC: 2

6 Dec 1982

5340-15-119-0578
Expansion Plug

151190578
70921441: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-149-2343
Ball Socket Seat

151492343
547164: RNCC: 3 | RNVC: 2

23 Dec 1998

5340-15-178-5507
Mounting Plate

151785507
2231.012.0001: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-118-3654
Mending Plate

151183654
60142395: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-180-3645
Mounting Plate

151803645
2587586: RNCC: 3 | RNVC: 2
2587586: RNCC: 5 | RNVC: 2

29 Apr 2008

5340-15-109-7454
Angle Bracket

151097454
60112178: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-152-7906
Mounting Bracket

151527906
P131106: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-155-8086
Loop Clamp

151558086
42092496: RNCC: 3 | RNVC: 2

5 Jul 2002

5340-15-004-2901
Handle Grip

150042901
SF260-12-105-01: RNCC: 3 | RNVC: 2
260-12-105-01: RNCC: 3 | RNVC: 2
(241)SF260-12-105-01: RNCC: 5 | RNVC: 2
(7001)5340150042901: RNCC: 5 | RNVC: 2
260-12-105-01: RNCC: 5 | RNVC: 9

5 Nov 1977

5340-15-057-7151
Angle Bracket

150577151
1376-23-119: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-180-0944
Angle Bracket

151800944
212-060-818-106: RNCC: 3 | RNVC: 2

28 Jan 2008

5340-15-118-0875
Ball Socket Seat

151180875
D0467958: RNCC: 3 | RNVC: 2

29 Nov 1994

5340-15-202-8368
Lock-Release Lever

152028368
S3301407: RNCC: 3 | RNVC: 2
(241)A0178S3301407: RNCC: 5 | RNVC: 2

19 Jul 2007

5340-15-110-5919
Mending Plate

151105919
60155134: RNCC: 3 | RNVC: 2

18 Apr 1990

5340-15-108-3110
Angle Bracket

151083110
60110048: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-059-9540
Retaining Strap

150599540
05760-101: RNCC: 3 | RNVC: 2

9 Nov 1976

5340-15-003-8340
Leather Strap

150038340
001101820012: RNCC: 5 | RNVC: 2
001101820012: RNCC: 5 | RNVC: 9

27 Feb 1985

5340-15-118-4016
Angle Bracket

151184016
60158994: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-148-3561
Angle Bracket

151483561
159563: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-118-3348
Retaining Strap

151183348
60144918: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-118-3338
Retaining Strap

151183338
60141458: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-153-3976
Mending Plate

151533976
5137-407-07: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-200-4503
Mounting Bracket

152004503
920-7548/03: RNCC: 3 | RNVC: 2
(241)A4582920-7548/03: RNCC: 5 | RNVC: 2

23 Jan 2006

5340-15-179-7043
Angle Bracket

151797043
00190256: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-111-8887
Angle Bracket

151118887
DOA0119524: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-118-8359
Butt Hinge Leaf

151188359
9449612: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-153-5187
Access Cover

151535187
142018105: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-198-2795
Mounting Plate

151982795
M794186: RNCC: 3 | RNVC: 2

14 Sep 2004

5340-15-178-4881
Support Hook

151784881
500348840: RNCC: 3 | RNVC: 2
A450013-002: RNCC: 5 | RNVC: 2

1 Jul 2005

5340-15-113-1448
Mending Plate

151131448
256A1025-001: RNCC: 3 | RNVC: 2

7 Oct 1990

5340-15-115-9631
Spring Tension Clip

151159631
V23154Z1022: RNCC: 3 | RNVC: 2

6 Apr 1994

5340-15-150-6016
Angle Bracket

151506016
105936: RNCC: 3 | RNVC: 2

6 Dec 1999

5340-15-116-2310
Screw Thread Insert

151162310
210002503: RNCC: 5 | RNVC: 2

30 Mar 1993

5340-15-139-4816
Angle Bracket

151394816
60101765: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-180-8126
Latch Bar

151808126
50410280: RNCC: 3 | RNVC: 2

24 Jul 2008

5340-15-055-8693
Angle Bracket

150558693
260-05-101-28: RNCC: 3 | RNVC: 2
260-05-101-28: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-108-5542
Rod End Clevis

151085542
129-0020-40-101: RNCC: 3 | RNVC: 2

18 Oct 1989

5340-15-062-9165
Loop Clamp

150629165
0-100251: RNCC: 3 | RNVC: 2

28 Aug 1981

5340-15-197-1769
Rim Lock Set

151971769
PN UAS 00031354: RNCC: 3 | RNVC: 2
5340F76027538: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-157-1760
Strap Hinge

151571760
(241)A3460CBD71314P24: RNCC: 3 | RNVC: 2
CBD71314P24: RNCC: 3 | RNVC: 2

13 May 2003

5340-15-198-8625
Retaining Bail

151988625
0010175: RNCC: 3 | RNVC: 2
D21/10: RNCC: 5 | RNVC: 2

23 Nov 2004

5340-15-147-8731
Access Cover

151478731
128808: RNCC: 3 | RNVC: 2

18 May 1998

5340-15-119-6389
Catch Strike

151196389
60149493: RNCC: 3 | RNVC: 2

6 Oct 1994

5340-15-148-6416
Mending Plate

151486416
27-633 SS-SF: RNCC: 3 | RNVC: 2
190512344: RNCC: 5 | RNVC: 2
(241)A0199190512344: RNCC: 5 | RNVC: 2

17 Sep 1998

5340-15-119-0480
Rod End Clevis

151190480
70917666: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-157-9189
Loop Clamp

151579189
0-164076: RNCC: 3 | RNVC: 2
1PA39630-164076: RNCC: 5 | RNVC: 2
(241)A39630-164076: RNCC: 5 | RNVC: 2

24 Nov 2003

5340-15-101-8034
Butt Hinge Leaf

151018034
808-14881-7: RNCC: 3 | RNVC: 2

12 Nov 1987

5340-15-057-4390
Retaining Band

150574390
204-9000-18-1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-055-8643
Angle Bracket

150558643
260-13-60-11: RNCC: 3 | RNVC: 2
260-13-60-11: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-045-3211
Rod End Clevis

150453211
510-12-53-02: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-109-4859
Angle Bracket

151094859
1R 502689: RNCC: 3 | RNVC: 2
1R 502689: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-139-3677
Angle Bracket

151393677
42009663: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-000-0632
Retaining Strap

150000632
182718622: RNCC: 3 | RNVC: 2

23 Jan 2013

5340-15-180-3654
Access Cover

151803654
2600633: RNCC: 3 | RNVC: 2
2600633: RNCC: 5 | RNVC: 2

29 Apr 2008

5340-15-063-3194
Retaining Strap

150633194
60104856: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-199-7409
Angle Bracket

151997409
N324G6013201: RNCC: 3 | RNVC: 2
(241)A0126N324G6013201: RNCC: 5 | RNVC: 2

22 May 2005

5340-15-180-9298
Retaining Band

151809298
5201A001: RNCC: 3 | RNVC: 2
(241)A08105201A001: RNCC: 5 | RNVC: 2

19 Aug 2008

5340-15-004-1521
Expansion Plug

150041521
1/01582/00: RNCC: 3 | RNVC: 2
1/01582/00: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-105-0138
Access Cover

151050138
303-43-0333: RNCC: 3 | RNVC: 2

14 Apr 1987

5340-15-187-1963
Retaining Band

151871963
069636: RNCC: 3 | RNVC: 2
(241)A3980069636: RNCC: 5 | RNVC: 2

24 Feb 2009

5340-15-003-9125
Mounting Plate

150039125
182741329: RNCC: 3 | RNVC: 2
(241)A0199182741329: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-002-8628
Cable Retractor

150028628
0000.385.091: RNCC: 3 | RNVC: 2

10 Oct 2013

5340-15-157-4056
Mounting Bracket

151574056
STAFFA: RNCC: 3 | RNVC: 2
(241)AD142STAFFA: RNCC: 5 | RNVC: 2

7 Jul 2003

5340-15-118-3801
Expansion Plug

151183801
60158447: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-107-2196
Angle Bracket

151072196
307115P1: RNCC: 3 | RNVC: 2

27 Oct 1988

5340-15-155-0969
Handle Grip

151550969
141308337: RNCC: 3 | RNVC: 2
I222/25N6: RNCC: 3 | RNVC: 2

18 Jan 2002

5340-15-007-4234
Angle Bracket

150074234
P-110257-003: RNCC: 3 | RNVC: 2
P110257-003: RNCC: 5 | RNVC: 2

12 Mar 1980

5340-15-177-7205
Mounting Bracket

151777205
B26/A050: RNCC: 3 | RNVC: 2

4 Jun 2004

5340-15-115-4473
Angle Bracket

151154473
SF260-05-182-11: RNCC: 3 | RNVC: 2
SF260-05-182-11: RNCC: 5 | RNVC: 9

29 Nov 1992

5340-15-001-1107
Mounting Bracket

150011107
5801359906: RNCC: 3 | RNVC: 2

31 May 2013

5340-15-005-0517
Retaining Strap

150050517
0-20359: RNCC: 3 | RNVC: 2

7 Sep 1978

5340-15-108-6122
Rod End Connector

151086122
741924: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-060-9789
Retaining Strap

150609789
253-031-012: RNCC: 3 | RNVC: 2
253.031.012: RNCC: 5 | RNVC: 2
253.031.012: RNCC: 5 | RNVC: 2

30 Jan 1978

5340-15-115-0035
Access Cover

151150035
000203557900: RNCC: 5 | RNVC: 2
000203557900: RNCC: 5 | RNVC: 9

23 Oct 1992

5340-15-205-2614
Retaining Bail

152052614
504378611: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-122-0630
Mounting Bracket

151220630
238BE370-2: RNCC: 3 | RNVC: 2

23 Apr 1996

5340-15-187-9612
Door Closer

151879612
011421: RNCC: 3 | RNVC: 2

5 Jun 2009

5340-15-055-6014
Rim Lock Set

150556014
DIS1971TAV027: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-059-3539
Retaining Strap

150593539
1127-40-325: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-157-9128
Angle Bracket

151579128
0-156066: RNCC: 3 | RNVC: 2
1PA39630-156066: RNCC: 5 | RNVC: 2
(241)A39630-156066: RNCC: 5 | RNVC: 2

24 Nov 2003

5340-15-061-0025
Plain Solid Disk

150610025
14944: RNCC: 3 | RNVC: 2

31 Mar 1976

5340-15-116-4801
Angle Bracket

151164801
60165520: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-133-7423
Angle Bracket

151337423
4448379: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-153-5201
Access Cover

151535201
142041010: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-118-4820
Mending Plate

151184820
02.0704.A.04: RNCC: 3 | RNVC: 2
02.0704.A.04: RNCC: 5 | RNVC: 9

7 Feb 1995

5340-15-187-6294
Mounting Bracket

151876294
99479910: RNCC: 3 | RNVC: 2

15 Apr 2009

5340-15-009-5739
Flush Lock

150095739
4021697: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-118-0085
Access Cover

151180085
1Q 560691LA: RNCC: 3 | RNVC: 2
1Q 560691LA: RNCC: 5 | RNVC: 9

28 Jan 1995

5340-15-195-2243
Synchro Clamp

151952243
A9159901: RNCC: 3 | RNVC: 2

7 Mar 2011

5340-15-156-0732
Mounting Plate

151560732
807009: RNCC: 3 | RNVC: 2
(241)S7177807009: RNCC: 5 | RNVC: 2

20 Nov 2002

5340-15-009-0429
Retaining Strap

150090429
1383861: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-007-7043
Loop Clamp

150077043
1391189: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-003-1368
Mounting Bracket

150031368
504383143: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-063-5117
Strap Hinge

150635117
60116892: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-120-9594
Loop Clamp

151209594
F78.0727.00: RNCC: 3 | RNVC: 2

5 Sep 1995

5340-15-118-6552
Plug Button

151186552
70923737: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-041-1348
Retaining Band

150411348
SN98: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-005-4612
Mending Plate

150054612
551: RNCC: 3 | RNVC: 2
1376-31-196: RNCC: 3 | RNVC: 2

6 Jul 2000

5340-15-204-3743
Expansion Plug

152043743
49468030: RNCC: 3 | RNVC: 2

26 Oct 2011

5340-15-003-1033
Angle Bracket

150031033
743602: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-119-5466
Mending Plate

151195466
1397437: RNCC: 3 | RNVC: 2

19 Sep 1994

5340-15-006-3553
Vent Plug

150063553
120484: RNCC: 3 | RNVC: 2

26 Oct 1979

5340-15-003-9375
Mounting Plate

150039375
182701174: RNCC: 3 | RNVC: 2
(241)A0199182701174: RNCC: 5 | RNVC: 2

4 Dec 2013

5340-15-020-2202
Leather Strap

150202202
01-231M79: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-118-1708
Expansion Plug

151181708
14282670: RNCC: 3 | RNVC: 2

20 Apr 1994

5340-15-162-1806
Mounting Bracket

151621806
SF260-05-405-1: RNCC: 3 | RNVC: 2
SF260-05-405-1: RNCC: 5 | RNVC: 9

3 Apr 2001

5340-15-107-2441
Retaining Strap

151072441
3070-258-11: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-114-6033
Metal Grille

151146033
MV-250 300X300: RNCC: 3 | RNVC: 2

23 Jun 1992

5340-15-005-5331
Loop Clamp

150055331
1376-09-489: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-008-7041
Retaining Strap

150087041
1141-32-902: RNCC: 3 | RNVC: 2

2 Sep 1980

5340-15-118-4457
Mending Plate

151184457
60156516: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-110-9854
Plug Button

151109854
GA2560: RNCC: 3 | RNVC: 2

12 Sep 1990

5340-15-152-2519
Mending Plate

151522519
D22 D918 00P: RNCC: 3 | RNVC: 2

17 Aug 2000

5340-15-103-3076
Rigid Caster

151033076
137SC-110-N114: RNCC: 3 | RNVC: 2

13 Dec 1988

5340-15-051-7721
Handle Grip

150517721
45-3433-11: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-148-4175
Block Clamp

151484175
D1403803: RNCC: 3 | RNVC: 2

11 Aug 1998

5340-15-161-0206
Coat And Hat Hook

151610206
F710127051: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-164-1894
Angle Bracket

151641894
5895939: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-154-4040
Angle Bracket

151544040
A6120-91094-2: RNCC: 3 | RNVC: 2

22 May 2001

5340-15-179-2667
Mounting Bracket

151792667
D1-85122-401: RNCC: 3 | RNVC: 2

10 Aug 2006

5340-15-148-5198
Rod End Clevis

151485198
98416236: RNCC: 3 | RNVC: 2

13 Aug 1999

5340-15-120-3522
Mending Plate

151203522
60146225: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-008-6124
Angle Bracket

150086124
4755353: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-118-2042
Screw Thread Insert

151182042
13582411: RNCC: 3 | RNVC: 2

22 Apr 1994

5340-15-163-3834
Bridge Clamp

151633834
9455039: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-161-2474
Rod End Clevis

151612474
59061141: RNCC: 3 | RNVC: 2
59061141: RNCC: 5 | RNVC: 2

11 Oct 2000

5340-15-178-1152
Access Cover

151781152
541BA170A08-001: RNCC: 3 | RNVC: 2

14 Feb 2005

5340-15-153-7228
Clamping Catch

151537228
142025187: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-118-2039
Screw Thread Insert

151182039
13582171: RNCC: 3 | RNVC: 2

22 Apr 1994

5340-15-205-3115
Detent Plunger

152053115
5V12110000: RNCC: 3 | RNVC: 2

2 Mar 2012

5340-15-118-3657
Mending Plate

151183657
60142264: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-175-5904
Handle Grip

151755904
EX3433RI4219361: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-116-4795
Angle Bracket

151164795
60162674: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-118-4432
Angle Bracket

151184432
60154186: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-118-1712
Expansion Plug

151181712
16986701: RNCC: 3 | RNVC: 2

20 Apr 1994

5340-15-157-6418
Block Clamp

151576418
AIT13901EE3220: RNCC: 3 | RNVC: 2

12 Oct 2003

5340-15-116-4977
Spring Tension Clip

151164977
41801099: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-119-0154
Rod End Clevis

151190154
70617932: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-009-5988
Retaining Strap

150095988
843883: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-152-3334
Retaining Strap

151523334
0-151993: RNCC: 3 | RNVC: 2
00151993: RNCC: 3 | RNVC: 2
(241)A39630-151993: RNCC: 5 | RNVC: 2

31 Aug 2000

5340-15-045-3923
Loop Clamp

150453923
N0R4-110-10-5: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-153-5260
Filler Opening Cap

151535260
442000000/72/07: RNCC: 3 | RNVC: 2
ICF 22: RNCC: 5 | RNVC: 2

7 Feb 2001

5340-15-108-0711
Lock-Release Lever

151080711
AL.100-02F-M.16: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-119-1313
Access Cover

151191313
73123767: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-008-0730
Retaining Strap

150080730
1396226: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-151-8661
Angle Bracket

151518661
60117163: RNCC: 3 | RNVC: 2

14 Jul 2000

5340-15-187-2430
Hinge Torsion Bar

151872430
504086022: RNCC: 3 | RNVC: 2

4 Mar 2009

5340-15-153-2823
Loop Clamp

151532823
CFG1-35/12: RNCC: 2 | RNVC: 3
162530219: RNCC: 5 | RNVC: 3

12 Dec 2000

5340-15-207-4272
Mounting Plate

152074272
FPR0722: RNCC: 3 | RNVC: 2
301064: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-15-193-7099
Mounting Bracket

151937099
4212223-02: RNCC: 3 | RNVC: 2

2 Jul 2010

5340-15-203-7319
Mounting Plate

152037319
00875R0710: RNCC: 3 | RNVC: 2
00875R0710: RNCC: 5 | RNVC: 2
CV173896: RNCC: 5 | RNVC: 2

27 Jun 2011

5340-15-120-0142
Retaining Strap

151200142
3N0338: RNCC: 3 | RNVC: 2

12 Jun 1995

5340-15-120-2193
Screw Thread Insert

151202193
60167912: RNCC: 3 | RNVC: 2

27 Feb 1995

5340-15-109-2912
Expansion Plug

151092912
773251: RNCC: 3 | RNVC: 2

9 May 1988

5340-15-205-1039
Retaining Strap

152051039
415348: RNCC: 3 | RNVC: 2
415348: RNCC: 5 | RNVC: 2
415348: RNCC: 5 | RNVC: 2
415348: RNCC: 5 | RNVC: 2

21 Feb 2012

5340-15-108-8412
Angle Bracket

151088412
02556: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-199-6329
Mounting Plate

151996329
219AS0002-29: RNCC: 3 | RNVC: 2
(241)A0126219AS0002-29: RNCC: 5 | RNVC: 2

12 May 2005

5340-15-194-5243
Caster Wheel

151945243
18HJ04543212S01-001/N: RNCC: 3 | RNVC: 2
(241)A001918HJ04543212S01-001/N: RNCC: 5 | RNVC: 2

30 Nov 2010

5340-15-187-3018
Retaining Band

151873018
UZ3545020032: RNCC: 3 | RNVC: 2
(241)A9410UZ3545020032: RNCC: 5 | RNVC: 2

11 Mar 2009

5340-15-112-3531
Butt Hinge Leaf

151123531
60148547: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-116-4800
Angle Bracket

151164800
60165514: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-058-3550
Handle Grip

150583550
1127-42-196: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-147-0970
Clip Retainer Plate

151470970
9563-21: RNCC: 3 | RNVC: 2

21 Aug 1997

5340-15-119-7153
Angle Bracket

151197153
60173698: RNCC: 3 | RNVC: 2

8 Nov 1994

5340-15-000-4331
Retaining Band

150004331
4260025200N: RNCC: 3 | RNVC: 2

1 Mar 2013

5340-15-063-7862
Retaining Strap

150637862
11340130: RNCC: 3 | RNVC: 2
77901441: RNCC: 5 | RNVC: 2

31 Mar 1982

5340-15-058-4012
Retaining Strap

150584012
553816160000: RNCC: 2 | RNVC: 3
538-16-1600: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-003-1922
Angle Bracket

150031922
742997: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-149-8071
Threaded Rod End

151498071
9AA5010A175-001: RNCC: 3 | RNVC: 2

2 Jun 1999

5340-15-119-7766
Mechanical Stop

151197766
9289406: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-113-0096
Retaining Strap

151130096
37956526200: RNCC: 3 | RNVC: 2
93155430: RNCC: 5 | RNVC: 2

23 Feb 1989

5340-15-153-5172
Access Cover

151535172
142010845: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-066-0724
Retaining Strap

150660724
5989464: RNCC: 3 | RNVC: 2
5989464: RNCC: 5 | RNVC: 9

8 May 1985

5340-15-153-5212
Access Cover

151535212
142041842: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-074-3934
Retaining Strap

150743934
B12UNAV1046A37UN1743CD: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-107-6699
Bow Handle

151076699
1037.438111-01: RNCC: 3 | RNVC: 2

21 Mar 1989

5340-15-074-3981
Retaining Strap

150743981
12UNI2136CD: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-202-0138
Filler Opening Cap

152020138
TAPPO0044: RNCC: 3 | RNVC: 2
(241)A4114TAPPO0044: RNCC: 5 | RNVC: 2

24 Jan 2007

5340-15-074-3994
Retaining Strap

150743994
8UNI2137: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-200-3941
Retaining Bail

152003941
7030098500: RNCC: 3 | RNVC: 2
(241)A91727030098500: RNCC: 5 | RNVC: 2

11 Jan 2006

5340-15-178-2381
Bow Handle

151782381
982150155: RNCC: 3 | RNVC: 2

11 Mar 2005

5340-15-151-2666
Angle Bracket

151512666
00084971: RNCC: 3 | RNVC: 2

4 May 2000

5340-15-164-7760
Handle Grip

151647760
181046480: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-065-4288
Angle Bracket

150654288
205-1100-42-3: RNCC: 3 | RNVC: 2

4 Sep 1984

5340-15-113-0842
Retaining Strap

151130842
65958-102: RNCC: 3 | RNVC: 2

9 May 1991

5340-15-122-3095
Loop Clamp

151223095
BT13GS-42: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-157-6415
Block Clamp

151576415
AIT13901GEHH7377: RNCC: 3 | RNVC: 2

12 Oct 2003

5340-15-116-4749
Butt Hinge Leaf

151164749
60166439: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-103-6460
Recess Handle

151036460
24009577A: RNCC: 3 | RNVC: 2

26 Nov 1987

5340-15-160-5020
Coat And Hat Hook

151605020
F720003391: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-111-9500
Butt Hinge

151119500
700A3606-401: RNCC: 3 | RNVC: 2

30 Jan 1991

5340-15-107-9583
Access Cover

151079583
2221.362: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-113-0122
Angle Bracket

151130122
37950626200: RNCC: 3 | RNVC: 2
93155246: RNCC: 5 | RNVC: 2

23 Feb 1989

5340-15-007-0490
Threaded Rod End

150070490
1026-05-123: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-058-3442
Rim Lock

150583442
1971-031: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-007-2627
Angle Bracket

150072627
1388343: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-144-8754
Access Door Hinge

151448754
109-0640-67-24: RNCC: 3 | RNVC: 2

24 Jan 1997

5340-15-002-8239
Mounting Plate

150028239
5801397705: RNCC: 3 | RNVC: 2

3 Oct 2013

5340-15-103-0769
Retaining Band

151030769
DE160.02.069: RNCC: 3 | RNVC: 2
(241)A5015DE160.02.069: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-117-0011
Rope Cleat

151170011
79041839: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-152-1060
Mending Plate

151521060
60137513: RNCC: 3 | RNVC: 2

7 Aug 2000

5340-15-103-1105
Bail Handle

151031105
DE013.13.415: RNCC: 3 | RNVC: 2
(241)A5015DE013.13.415: RNCC: 5 | RNVC: 2

14 Sep 1985

5340-15-059-7242
Butt Hinge Leaf

150597242
260-05-135-15: RNCC: 3 | RNVC: 2
260-05-135-15: RNCC: 5 | RNVC: 9

19 May 1976

5340-15-179-5499
Angle Bracket

151795499
71-13500: RNCC: 3 | RNVC: 2
(241)A331471-13500: RNCC: 5 | RNVC: 2

2 Mar 2007

5340-15-007-2430
Loop Clamp

150072430
1/04500/90: RNCC: 3 | RNVC: 2
0-49044: RNCC: 5 | RNVC: 2
(241)A424910450090: RNCC: 5 | RNVC: 2
10450090: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-151-4093
Plain Solid Disk

151514093
0-169745: RNCC: 3 | RNVC: 2
1PA39630-169745: RNCC: 5 | RNVC: 2

22 May 2000

5340-15-121-9888
Angle Bracket

151219888
60166895: RNCC: 3 | RNVC: 2

4 Apr 1996

5340-15-105-4414
Handle Grip

151054414
8983943: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-152-8011
Access Cover

151528011
P300205: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-117-6445
Mending Plate

151176445
22202203: RNCC: 3 | RNVC: 2

5 Jan 1994

5340-15-169-9258
Angle Bracket

151699258
F72019941: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-153-7748
Access Cover

151537748
02700A135510: RNCC: 5 | RNVC: 2
02700A135510: RNCC: 5 | RNVC: 9

28 Feb 2001

5340-15-170-3191
Plain Solid Disk

151703191
4954580: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-065-2604
Loop Clamp

150652604
FIG6630-22: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-063-5098
Clamping Catch

150635098
0-117313: RNCC: 3 | RNVC: 2
60113675: RNCC: 3 | RNVC: 2
(241)A39630-117313: RNCC: 5 | RNVC: 2

15 Oct 1982

5340-15-106-9737
Elastic Strap

151069737
IT 1508-03: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-064-7089
Rod End Clevis

150647089
AF106-03D14: RNCC: 3 | RNVC: 2

10 Jun 1984

5340-15-118-1949
Mending Plate

151181949
2660157: RNCC: 3 | RNVC: 2
2660157: RNCC: 5 | RNVC: 2
93160371: RNCC: 5 | RNVC: 2

22 Apr 1994

5340-15-105-8387
Retaining Band

151058387
260-3630-04: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-109-2933
Spring Tension Clip

151092933
60139868: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-118-7970
Expansion Plug

151187970
10158601: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-115-2240
Handle Grip

151152240
PL.40M10ROUGE: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-118-4023
Angle Bracket

151184023
60168633: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-121-0603
Screw Thread Insert

151210603
M4(X0.7)X2D-ACC.INOX18/8AUST.PAS: RNCC: 3 | RNVC: 2
210602563: RNCC: 5 | RNVC: 2

21 Sep 1995

5340-15-119-4634
Access Cover

151194634
705-22-030-12/M: RNCC: 3 | RNVC: 2

7 Jun 1995

5340-15-121-9329
Retaining Strap

151219329
D9103017P: RNCC: 3 | RNVC: 2
D9103017P: RNCC: 5 | RNVC: 9

28 Aug 1996

5340-15-050-5290
Strap Fastener Loop

150505290
03-604B11: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-007-8537
Angle Bracket

150078537
4988011: RNCC: 3 | RNVC: 2

27 Aug 1979

5340-15-154-1955
Angle Bracket

151541955
0-163692: RNCC: 3 | RNVC: 2
00163692: RNCC: 3 | RNVC: 2
(241)A39630-163692: RNCC: 5 | RNVC: 2
1PA39630-163692: RNCC: 5 | RNVC: 2

28 Mar 2001

5340-15-109-6674
Angle Bracket

151096674
70-885-410: RNCC: 3 | RNVC: 2
70-885-410: RNCC: 5 | RNVC: 9

16 Apr 1978

5340-15-103-6725
Bow Handle

151036725
24009360A: RNCC: 3 | RNVC: 2

26 Nov 1987

5340-15-187-3108
Retaining Band

151873108
UZ190: RNCC: 3 | RNVC: 2
(241)A9410UZ190: RNCC: 5 | RNVC: 2

11 Mar 2009

5340-15-065-7272
Access Door Hinge

150657272
109-0361-06-2: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-15-102-1053
Webbing Strap

151021053
192-0547/13: RNCC: 3 | RNVC: 2

22 Jun 1986

5340-15-108-7557
Spring Tension Clip

151087557
1127-10-769: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-102-4515
Rod End Clevis

151024515
223A3049-001: RNCC: 3 | RNVC: 2

30 Aug 1988

5340-15-118-9119
Loop Clamp

151189119
70638780: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-178-7751
Loop Clamp

151787751
017292: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-051-3167
Loop Clamp

150513167
1-04190-05: RNCC: 3 | RNVC: 2
10419005: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-057-4376
Angle Bracket

150574376
204-8300-04-1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-108-0766
Spring Holder

151080766
32-02-289: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-204-5229
Dashpot

152045229
42563612: RNCC: 3 | RNVC: 2
CV179062A: RNCC: 5 | RNVC: 2
GS-40-150-EE-3000: RNCC: 5 | RNVC: 2

8 Nov 2011

5340-15-153-7758
Access Cover

151537758
02731A113150: RNCC: 5 | RNVC: 2
T0064455: RNCC: 5 | RNVC: 2
02731A113150: RNCC: 5 | RNVC: 9

28 Feb 2001

5340-15-063-7520
Mending Plate

150637520
40.18.01.309: RNCC: 3 | RNVC: 2
95.18.70.06: RNCC: 5 | RNVC: 2

10 May 1983

5340-15-116-7144
Access Door Hinge

151167144
109-0311-66-103: RNCC: 3 | RNVC: 2

23 Jun 1993

5340-15-103-4457
Lock-Release Lever

151034457
1276-19-104: RNCC: 3 | RNVC: 2
127619104: RNCC: 5 | RNVC: 2

30 May 1989

5340-15-004-8140
Mending Plate

150048140
0-33358: RNCC: 3 | RNVC: 2

7 Sep 1977

5340-15-062-3531
Butt Hinge Leaf

150623531
A1-23091-001: RNCC: 3 | RNVC: 2
A1-23091-001: RNCC: 5 | RNVC: 9

4 May 1982

5340-15-202-2783
Loop Clamp

152022783
17775990: RNCC: 3 | RNVC: 2
(241)A424917775990: RNCC: 5 | RNVC: 2

19 Feb 2007

5340-15-001-8406
Mounting Bracket

150018406
500422430: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-147-7689
Angle Bracket

151477689
611-0086: RNCC: 3 | RNVC: 2

6 Apr 1998

5340-15-109-0734
Mending Plate

151090734
11627-103B1: RNCC: 3 | RNVC: 2

18 Dec 1989

5340-15-103-8664
Screw Thread Insert

151038664
1/42019/80: RNCC: 3 | RNVC: 2
14201980: RNCC: 5 | RNVC: 2

30 Mar 1988

5340-15-119-7127
Loop Clamp

151197127
MB9360-S-62-N-370: RNCC: 3 | RNVC: 2
230092072: RNCC: 5 | RNVC: 2

7 Nov 1994

5340-15-052-0377
Loop Clamp

150520377
M781-20-75-11: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-100-6540
Angle Bracket

151006540
A-1042104-101: RNCC: 3 | RNVC: 2

7 Sep 1987

5340-15-118-8584
Access Cover

151188584
291702048Z: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-205-1757
Retaining Band

152051757
A201014: RNCC: 3 | RNVC: 2
(241)AD201A201014: RNCC: 5 | RNVC: 2

22 Feb 2012

5340-15-006-2991
Screw Thread Insert

150062991
4391411: RNCC: 3 | RNVC: 2
4391411: RNCC: 5 | RNVC: 9

29 Jun 1979

5340-15-118-7290
Retaining Strap

151187290
73127629: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-009-3274
Angle Bracket

150093274
P-884044-001: RNCC: 3 | RNVC: 2

12 Sep 1980

5340-15-051-2512
Angle Bracket

150512512
TM492334-1289: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-102-7228
Rod End Clevis

151027228
1576-06-570: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-118-4504
Angle Bracket

151184504
60147825: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-157-9318
Retaining Strap

151579318
0-106671: RNCC: 3 | RNVC: 2
(241)A39630-106671: RNCC: 5 | RNVC: 2
1PA39630-106671: RNCC: 5 | RNVC: 2

25 Nov 2003

5340-15-058-6759
Rim Lock

150586759
1971-032: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-058-0223
Clamping Catch

150580223
AL54028-401: RNCC: 3 | RNVC: 2
AL54028-401: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-178-3304
Access Cover

151783304
109-0731-41-109: RNCC: 3 | RNVC: 2

29 Apr 2005

5340-15-194-1824
Mounting Bracket

151941824
210F506-7200-01: RNCC: 3 | RNVC: 2

29 Sep 2010

5340-15-109-6135
Spring Holder

151096135
525467-01: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-194-3838
Mounting Bracket

151943838
109-B700-35-273: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-15-041-7950
Angle Bracket

150417950
3-3605-100-1-41026: RNCC: 3 | RNVC: 2
3-3605-1-00-1-41026: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-157-9155
Angle Bracket

151579155
0-160940: RNCC: 3 | RNVC: 2
00160940: RNCC: 3 | RNVC: 2
(241)A39630-160940: RNCC: 5 | RNVC: 2
1PA39630-160940: RNCC: 5 | RNVC: 2

24 Nov 2003

5340-15-067-6903
Handle Grip

150676903
315175: RNCC: 2 | RNVC: 2
1P 315175: RNCC: 3 | RNVC: 2
1P 315175: RNCC: 5 | RNVC: 9
315175: RNCC: 5 | RNVC: 9

1 Apr 1998

5340-15-199-7338
Bail Handle

151997338
141-6207/02: RNCC: 3 | RNVC: 2
(241)A0069141-6207/02: RNCC: 5 | RNVC: 2

22 May 2005

5340-15-109-3759
Angle Bracket

151093759
5137-307-18: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-148-2128
Retaining Band

151482128
999-0500-84-2: RNCC: 3 | RNVC: 2

2 Jul 1998

5340-15-004-3543
Clip Retainer Plate

150043543
P-110262-001: RNCC: 3 | RNVC: 2
P110262-001: RNCC: 5 | RNVC: 2

14 Jun 1978

5340-15-051-3158
Expansion Plug

150513158
1-01583-00: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-111-4193
Angle Bracket

151114193
329162P3: RNCC: 3 | RNVC: 2
329162P3: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-065-6592
Rod End Clevis

150656592
39X500-12-18-01: RNCC: 3 | RNVC: 2

19 Jun 1985

5340-15-007-8970
Expansion Plug

150078970
1-01581-50: RNCC: 3 | RNVC: 2
10158150: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-057-2574
Loop Clamp

150572574
8-8253-100-99422: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-058-7516
Loop Clamp

150587516
6094-3616-61: RNCC: 3 | RNVC: 2

3 May 1974

5340-15-117-6771
Strap Hinge

151176771
29044-001A01: RNCC: 3 | RNVC: 2
29044-001A1: RNCC: 5 | RNVC: 2

10 Jan 1994

5340-15-118-4433
Angle Bracket

151184433
60154187: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-105-2827
Screw Thread Insert

151052827
RO.800-154: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-103-6884
Tubular Fairlead

151036884
M20FA706A: RNCC: 3 | RNVC: 2

26 Nov 1987

5340-15-202-3723
Retaining Strap

152023723
3355112-01: RNCC: 3 | RNVC: 2

5 Mar 2007

5340-15-121-8870
Angle Bracket

151218870
206-9320-05-7: RNCC: 3 | RNVC: 2

19 Mar 1996

5340-15-195-4867
Vent Plug

151954867
GW62504: RNCC: 3 | RNVC: 2

29 Mar 2011

5340-15-155-2951
Expansion Plug

151552951
60179801: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-15-148-6561
Angle Bracket

151486561
190525175: RNCC: 3 | RNVC: 2

17 Sep 1998

5340-15-148-3984
Stand Base

151483984
142052241: RNCC: 3 | RNVC: 2

10 Aug 1998

5340-15-108-7069
Loop Clamp

151087069
12177690: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-006-5998
Rod End Clevis

150065998
03172-101: RNCC: 3 | RNVC: 2

12 Feb 1980

5340-15-203-4438
Mounting Bracket

152034438
MX-MH-SECUREFLEX-ESWS: RNCC: 3 | RNVC: 2
MX-MH-SECUREFLEX-ESWS: RNCC: 3 | RNVC: 2
(241)A8460MX-MH-SECUREFLEX-ESWS: RNCC: 5 | RNVC: 2
(241)AG590MX-MH-SECUREFLEX-ESWS: RNCC: 5 | RNVC: 2

30 Jan 2008

5340-15-120-2460
Mounting Plate

151202460
236BE100-1: RNCC: 3 | RNVC: 2

6 Mar 1995

5340-15-004-3771
Mending Plate

150043771
0-33336: RNCC: 3 | RNVC: 2

7 Sep 1977

5340-15-157-1800
Loop Clamp

151571800
A079A024NB: RNCC: 3 | RNVC: 2

15 May 2003

5340-15-107-5087
Loop Clamp

151075087
8588942: RNCC: 3 | RNVC: 2
(241)A42498588942: RNCC: 5 | RNVC: 2

30 Mar 1988

5340-15-150-1014
Mounting Bracket

151501014
120009301: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-169-4149
Coat And Hat Hook

151694149
F72011751: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-148-3478
Angle Bracket

151483478
104651: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-009-6357
Retaining Strap

150096357
1161288: RNCC: 3 | RNVC: 2

17 Oct 1980

5340-15-001-5964
Retaining Strap

150015964
504227456: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-009-2005
Angle Bracket

150092005
1393358: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-005-7130
Catch Strike

150057130
SF260-11-129-13: RNCC: 3 | RNVC: 2
SF260-11-129-13: RNCC: 5 | RNVC: 9

18 May 1979

5340-15-148-9894
Mounting Plate

151489894
320963F91 PC NBR 12: RNCC: 3 | RNVC: 2

9 Nov 1998

5340-15-009-9664
Angle Bracket

150099664
A1100: RNCC: 3 | RNVC: 2

17 Mar 1981

5340-15-187-1308
Retaining Strap

151871308
42557448: RNCC: 3 | RNVC: 2

19 Feb 2009

5340-15-201-2980
Access Cover

152012980
162520223: RNCC: 3 | RNVC: 2

20 Jul 2006

5340-15-195-2195
Mounting Plate

151952195
219930512: RNCC: 3 | RNVC: 2
219930512: RNCC: 5 | RNVC: 2
CV173696: RNCC: 5 | RNVC: 2

7 Mar 2011

5340-15-206-3527
Mounting Plate

152063527
50040 7283: RNCC: 3 | RNVC: 2

4 Jun 2012

5340-15-057-8097
Screw Thread Insert

150578097
1276-09-285: RNCC: 3 | RNVC: 2
127609285: RNCC: 5 | RNVC: 2

31 Dec 1975

5340-15-195-3072
Mounting Bracket

151953072
55883020: RNCC: 3 | RNVC: 2
(241)AB59555883020: RNCC: 5 | RNVC: 2

15 Mar 2011

5340-15-207-8268
Mounting Bracket

152078268
150100110: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-064-7252
Loop Clamp

150647252
13416508: RNCC: 3 | RNVC: 2

17 Nov 1983

5340-15-001-7792
Access Cover

150017792
8053495: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-064-1152
Loop Clamp

150641152
SERB612: RNCC: 3 | RNVC: 2
SERB612: RNCC: 5 | RNVC: 9

4 Jan 1982

5340-15-202-2793
Loop Clamp

152022793
18088493: RNCC: 3 | RNVC: 2
(241)A424918088493: RNCC: 5 | RNVC: 2

19 Feb 2007

5340-15-002-2742
Mounting Bracket

150022742
504367109: RNCC: 3 | RNVC: 2
(241)A4249504367109: RNCC: 5 | RNVC: 2

2 Aug 2013

5340-15-206-7959
Access Cover

152067959
42102632: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-111-3796
Strap Hinge

151113796
113A6022-009: RNCC: 3 | RNVC: 2

7 Sep 1990

5340-15-206-9432
Control Rod

152069432
102726008: RNCC: 3 | RNVC: 2
(241)A0199102726008: RNCC: 5 | RNVC: 2

31 Jul 2012

5340-15-007-2049
Angle Bracket

150072049
1391115: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-100-5467
Mending Plate

151005467
8065: RNCC: 3 | RNVC: 2

28 Aug 1983

5340-15-120-4512
Angle Bracket

151204512
142502445: RNCC: 3 | RNVC: 2

25 May 1995

5340-15-152-0714
Mending Plate

151520714
204-4610-13-109: RNCC: 3 | RNVC: 2

3 Aug 2000

5340-15-179-2130
Bow Handle

151792130
4705 13 301: RNCC: 3 | RNVC: 2

10 Aug 2006

5340-15-178-6509
Mounting Plate

151786509
2231.069.0002: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-187-3725
Mounting Plate

151873725
SCHEL0259: RNCC: 3 | RNVC: 2
(241)A4114SCHEL0259: RNCC: 5 | RNVC: 2

20 Mar 2009

5340-15-001-0693
Lever Bracket

150010693
62563732: RNCC: 3 | RNVC: 2

24 May 2013

5340-15-001-8209
Mounting Bracket

150018209
5949782860: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-119-1694
Mounting Bracket

151191694
75208947: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-065-0075
Retaining Strap

150650075
62287-001A1: RNCC: 3 | RNVC: 2

25 Aug 1984

5340-15-005-1308
Rod End Connector

150051308
20831-101A1: RNCC: 3 | RNVC: 2

23 Nov 1978

5340-15-186-8391
Bow Handle

151868391
6382110: RNCC: 3 | RNVC: 2

5 Jan 2009

5340-15-179-7030
Mounting Bracket

151797030
0000500413959: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-118-8610
Access Cover

151188610
299709295D: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-121-2134
Rod End Connector

151212134
68679-001A02: RNCC: 3 | RNVC: 2
68679-001A2: RNCC: 3 | RNVC: 2

23 Oct 1995

5340-15-121-4621
Butt Hinge Leaf

151214621
211A7172-001: RNCC: 3 | RNVC: 2

21 Dec 1995

5340-15-148-3528
Mending Plate

151483528
152382: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-118-8600
Access Cover

151188600
299702502T: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-119-0139
Angle Bracket

151190139
70604769: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-118-7649
Access Cover

151187649
4599557: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-119-0882
Loop Clamp

151190882
70930277: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-060-9341
Bow Handle

150609341
F304C3A35: RNCC: 3 | RNVC: 2
F304C3A-35: RNCC: 5 | RNVC: 2
F304C3A-35: RNCC: 5 | RNVC: 2

22 May 1977

5340-15-125-0769
Handle Grip

151250769
6-30129-101-75419A2: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-108-2939
Angle Bracket

151082939
1387500: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-115-7439
Handle Grip

151157439
I.281/40+XM6: RNCC: 3 | RNVC: 2

3 Sep 1993

5340-15-073-5212
Rim Lock Set

150735212
18390-108: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-100-7624
Door Handle

151007624
109-0323-27-3: RNCC: 3 | RNVC: 2

24 Nov 1986

5340-15-187-7319
Loop Clamp

151877319
EN4114F03WH1: RNCC: 3 | RNVC: 2
(241)I9005EN4114F03WH1: RNCC: 5 | RNVC: 2

5 May 2009

5340-15-051-3460
Rod End Clevis

150513460
5-1925-101-45582-1: RNCC: 3 | RNVC: 2
5-1925-1-01-45582-1: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-205-3842
Access Cover

152053842
HF 502-30.195 POS 9: RNCC: 3 | RNVC: 2

6 Mar 2012

5340-15-102-7226
Retaining Strap

151027226
1576-06-628: RNCC: 3 | RNVC: 2
157606628: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-121-2990
Mounting Bracket

151212990
15196-37: RNCC: 3 | RNVC: 2

7 Nov 1995

5340-15-162-2471
Mounting Plate

151622471
024816: RNCC: 3 | RNVC: 2
K945907: RNCC: 5 | RNVC: 2

17 May 2001

5340-15-116-4804
Angle Bracket

151164804
60165659: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-103-7785
Retaining Strap

151037785
101256: RNCC: 3 | RNVC: 2

8 Mar 1988

5340-15-120-0893
Retaining Strap

151200893
60164933: RNCC: 3 | RNVC: 2

19 Dec 1994

5340-15-113-1469
Butt Hinge

151131469
311A5516-001: RNCC: 3 | RNVC: 2

7 Oct 1990

5340-15-149-5886
Retaining Clip

151495886
217-1-014A: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-205-4200
Retaining Strap

152054200
178905205: RNCC: 3 | RNVC: 2
(241)A0199178905205: RNCC: 5 | RNVC: 2

8 Mar 2012

5340-15-003-7706
Expansion Shield

150037706
FIS00570021: RNCC: 3 | RNVC: 2
(241)A8460FIS00570021: RNCC: 5 | RNVC: 2

25 Nov 2013

5340-15-115-4935
Loop Clamp

151154935
NOR2-505-06-13A: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-153-2552
Butt Hinge

151532552
122605438: RNCC: 2 | RNVC: 3

12 Dec 2000

5340-15-187-6817
Flush Lock

151876817
76041444: RNCC: 3 | RNVC: 2

24 Apr 2009

5340-15-108-5112
Expansion Plug

151085112
1124428: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-101-8912
Mending Plate

151018912
1P250051: RNCC: 3 | RNVC: 2
1P250051: RNCC: 5 | RNVC: 9

25 Nov 1992

5340-15-139-3684
Angle Bracket

151393684
42016627: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-180-9190
Access Cover

151809190
120020171: RNCC: 3 | RNVC: 2
(241)A5009120020171: RNCC: 5 | RNVC: 2

8 Aug 2008

5340-15-177-5816
Swivel Caster

151775816
LRK100/GRD: RNCC: 3 | RNVC: 2

13 May 2004

5340-15-157-9335
Mending Plate

151579335
0-102185: RNCC: 3 | RNVC: 2
00102185: RNCC: 3 | RNVC: 2
(241)A39630-102185: RNCC: 5 | RNVC: 2
1PA39630-102185: RNCC: 5 | RNVC: 2

25 Nov 2003

5340-15-157-5086
Catch Strike

151575086
HTE9788-101: RNCC: 3 | RNVC: 2
(241)A0303HTE9788-101: RNCC: 5 | RNVC: 2

9 Sep 2003

5340-15-006-0255
Angle Bracket

150060255
1026-11-107: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-057-4393
Retaining Band

150574393
204-9000-12-3: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-109-3752
Angle Bracket

151093752
5137-307-02: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-151-9654
Stand Base

151519654
S0010/A02/13/6: RNCC: 3 | RNVC: 2

31 Jul 2000

5340-15-148-7058
Access Cover

151487058
W029934B: RNCC: 3 | RNVC: 2

28 Sep 1998

5340-15-102-1547
Mending Plate

151021547
8243.01.14: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-153-2590
Plain Solid Disk

151532590
122606446: RNCC: 2 | RNVC: 3

12 Dec 2000

5340-15-118-4420
Angle Bracket

151184420
60153607: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-151-1147
Mounting Bracket

151511147
380-2144/01: RNCC: 3 | RNVC: 2

21 Mar 2000

5340-15-114-3539
Corner Brace

151143539
5216-239-20: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-15-057-3334
Loop Clamp

150573334
1276-04-202: RNCC: 3 | RNVC: 2
127604202: RNCC: 5 | RNVC: 2

31 Dec 1975

5340-15-148-3521
Mending Plate

151483521
110580: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-179-7018
Mounting Plate

151797018
0000500414037: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-002-6934
Snap Hook

150026934
411120ZYZKK: RNCC: 3 | RNVC: 2

26 Sep 2013

5340-15-118-3346
Retaining Strap

151183346
60146220: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-118-4448
Rod End Clevis

151184448
60156092: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-065-7285
Rod End Clevis

150657285
109-0503-22-1: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-15-117-6005
Mounting Bracket

151176005
DPR23434-131-132: RNCC: 3 | RNVC: 2

1 Dec 1993

5340-15-193-1811
Shelf Bracket

151931811
76069964: RNCC: 3 | RNVC: 2

20 Apr 2010

5340-15-061-5040
Mending Plate

150615040
P26DD45: RNCC: 5 | RNVC: 2
P26DD45: RNCC: 5 | RNVC: 9

12 Oct 1977

5340-15-103-4470
Lock-Release Lever

151034470
147820/802: RNCC: 3 | RNVC: 2
UXAB259299R030: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-109-0848
Angle Bracket

151090848
60137889: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-112-3500
Angle Bracket

151123500
60153229: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-154-4038
Angle Bracket

151544038
A6120-91092-1: RNCC: 3 | RNVC: 2

22 May 2001

5340-15-052-2224
Loop Clamp

150522224
N0R2-505-06-18A: RNCC: 3 | RNVC: 2

15 Jun 1971

5340-15-151-5188
Loop Clamp

151515188
0-151992: RNCC: 3 | RNVC: 2
(241)A39630-151992: RNCC: 5 | RNVC: 2
1PA39630-151992: RNCC: 5 | RNVC: 2

1 Jun 2000

5340-15-102-8536
Butt Hinge Leaf

151028536
213A7190-001: RNCC: 3 | RNVC: 2

16 Dec 1988

5340-15-075-0608
Handle Grip

150750608
3424-11: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-118-0878
Angle Bracket

151180878
D0488120: RNCC: 3 | RNVC: 2

20 Dec 1994

5340-15-116-4828
Angle Bracket

151164828
93914910: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-063-0808
Retaining Band

150630808
4732024: RNCC: 3 | RNVC: 2

15 Jun 1982

5340-15-061-9692
Mending Plate

150619692
242001056L: RNCC: 3 | RNVC: 2

22 Jun 1984

5340-15-129-8734
Handle Grip

151298734
140-20-13-001-01-60: RNCC: 3 | RNVC: 2
140-20-13-001-01-60: RNCC: 5 | RNVC: 9

9 Oct 1996

5340-15-153-5255
Filler Opening Cap

151535255
442000000/72/02: RNCC: 3 | RNVC: 2
ICF 12: RNCC: 5 | RNVC: 2

7 Feb 2001

5340-15-117-6393
Access Cover

151176393
142507929: RNCC: 3 | RNVC: 2

4 Jan 1994

5340-15-118-8605
Access Cover

151188605
299707302A: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-147-8741
Access Cover

151478741
129447: RNCC: 3 | RNVC: 2

18 May 1998

5340-15-119-9068
Rod End Clevis

151199068
142004219: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-102-0357
Plain Solid Disk

151020357
0751U01: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-120-8734
Access Cover

151208734
109-0312-78-101: RNCC: 3 | RNVC: 2

4 Sep 1995

5340-15-103-4693
Retaining Strap

151034693
301-4578-00: RNCC: 3 | RNVC: 2

9 Feb 1988

5340-15-105-8972
Spring Tension Clip

151058972
9909068: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-103-2673
Bow Handle

151032673
5176-246-00: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-007-0654
Screw Thread Insert

150070654
1137-19-137: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-112-9579
Rod End Clevis

151129579
00080212: RNCC: 3 | RNVC: 2

1 Jul 1990

5340-15-205-1758
Retaining Band

152051758
A201018: RNCC: 3 | RNVC: 2
(241)AD201A201018: RNCC: 5 | RNVC: 2

22 Feb 2012

5340-15-193-1953
Access Cover

151931953
16052: RNCC: 3 | RNVC: 2

20 Apr 2010

5340-15-119-3841
Clamping Catch

151193841
60169363: RNCC: 3 | RNVC: 2

25 Jul 1994

5340-15-149-3028
Mending Plate

151493028
4885353: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-118-7295
Rod End Connector

151187295
73127687: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-007-2050
Angle Bracket

150072050
1385360: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-120-4881
Access Cover

151204881
142502480: RNCC: 3 | RNVC: 2

9 Jun 1995

5340-15-119-6457
Spring Tension Clip

151196457
50610: RNCC: 3 | RNVC: 2
93191675: RNCC: 5 | RNVC: 2
142077104: RNCC: 5 | RNVC: 2
50610: RNCC: 5 | RNVC: 9

10 Oct 1994

5340-15-005-5340
Handle Grip

150055340
1026-02-174: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-111-9496
Butt Hinge Leaf

151119496
700A3606-001: RNCC: 3 | RNVC: 2

30 Jan 1991

5340-15-119-1547
Expansion Plug

151191547
75208122: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-001-5817
Utility Access Door

150015817
42566661: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-151-8685
Angle Bracket

151518685
60120183: RNCC: 3 | RNVC: 2

14 Jul 2000

5340-15-111-7985
Angle Bracket

151117985
10303: RNCC: 3 | RNVC: 2

1 Jul 1990

5340-15-108-6269
Retaining Strap

151086269
60135629: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-064-3722
Retaining Strap

150643722
1394332: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-118-4754
Webbing Strap

151184754
60168412: RNCC: 3 | RNVC: 2

6 Jun 1994

5340-15-116-2977
Plain Solid Disk

151162977
190515286: RNCC: 3 | RNVC: 2

19 Apr 1993

5340-15-100-3241
Retaining Strap

151003241
000204515300: RNCC: 5 | RNVC: 2
000204515300: RNCC: 5 | RNVC: 9

11 Jul 1986

5340-15-194-3558
Block Clamp

151943558
109-0519-29-101: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-15-121-0619
Screw Thread Insert

151210619
M8(X1.25)X2D: RNCC: 3 | RNVC: 2
210002567: RNCC: 5 | RNVC: 2

21 Sep 1995

5340-15-003-9126
Mounting Plate

150039126
182741330: RNCC: 3 | RNVC: 2
(241)A0199182741330: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-007-2560
Angle Bracket

150072560
1383623: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-179-6971
Angle Bracket

151796971
0000500404810: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-150-2274
Mounting Plate

151502274
P200324: RNCC: 3 | RNVC: 2

5 Jul 2000

5340-15-007-3309
Angle Bracket

150073309
1276-18-185: RNCC: 3 | RNVC: 2

27 Oct 1979

5340-15-108-6339
Catch Strike

151086339
60144158: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-118-3626
Angle Bracket

151183626
60140809: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-118-3635
Angle Bracket

151183635
60138322: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-161-2463
Spring Tension Clip

151612463
58015417: RNCC: 3 | RNVC: 2
58015417: RNCC: 5 | RNVC: 2

11 Oct 2000

5340-15-119-1327
Mending Plate

151191327
73124476: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-149-1110
Angle Bracket

151491110
60171296: RNCC: 3 | RNVC: 2

2 Dec 1998

Load More Results