What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 99 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 99 of 446

5340-14-443-3048
Mortise Lock Set

144433048
S3Z17206824: RNCC: 3 | RNVC: 2

14 Nov 1990

5340-14-524-4570
Butt Hinge

145244570
85.7.1110: RNCC: 3 | RNVC: 2
SYB2177: RNCC: 5 | RNVC: 2

21 Mar 2001

5340-14-464-5076
Runner

144645076
8628GA089NI009: RNCC: 3 | RNVC: 2
13913060-8: RNCC: 5 | RNVC: 2

4 Aug 1993

5340-14-460-3164
Flush Catch Claw

144603164
39449846: RNCC: 3 | RNVC: 2
39449846: RNCC: 5 | RNVC: 9

21 Jan 1993

5340-14-520-6201
Mending Plate

145206201
C46329-2: RNCC: 3 | RNVC: 2

24 May 2000

5340-14-467-0199
Casement Fastener

144670199
462023AA: RNCC: 3 | RNVC: 2

15 Dec 1993

5340-14-534-1426
Cover Strip

145341426
332A22-1445-62: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-399-2966
Access Cover

143992966
4120-0110: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-529-1953
Access Cover

145291953
453-50013-000: RNCC: 3 | RNVC: 2

15 Mar 2002

5340-14-541-5120
Angle Bracket

145415120
1091320-001: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-451-5974
Bow Handle

144515974
R4P265-19: RNCC: 3 | RNVC: 2

25 Nov 1991

5340-14-331-8411
Access Cover

143318411
3290-61060: RNCC: 3 | RNVC: 9
329061060: RNCC: 5 | RNVC: 9
329061060: RNCC: 5 | RNVC: 9
329061060: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-226-8263
Rod End Clevis

142268263
645-91-33G: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-448-8251
Detent Plunger

144488251
A03037-10-2050P002: RNCC: 3 | RNVC: 2

10 Jul 1991

5340-14-488-9274
Mounting Bracket

144889274
360A25-0024-36: RNCC: 3 | RNVC: 2

11 Jun 1997

5340-14-554-9742
Mounting Plate

145549742
332A24-0620-20: RNCC: 3 | RNVC: 2

13 Sep 2007

5340-14-427-9825
Blank Panel

144279825
399-002-864-0: RNCC: 3 | RNVC: 2

24 Nov 1988

5340-14-526-8657
Mounting Plate

145268657
21224283-00: RNCC: 3 | RNVC: 2
21224283-2: RNCC: 5 | RNVC: 2

12 Sep 2001

5340-14-364-9680
Loop Clamp

143649680
0157010180: RNCC: 3 | RNVC: 2
85-691-2630: RNCC: 6 | RNVC: 9

2 Sep 1980

5340-14-348-7306
Flush Catch Claw

143487306
NO PRIMARY REF14-348-7306: RNCC: 3 | RNVC: 2
ST453M11P58: RNCC: 5 | RNVC: 9

19 Apr 1978

5340-14-545-6101
Mounting Bracket

145456101
10825-00: RNCC: 3 | RNVC: 2

25 Apr 2005

5340-14-448-5764
Mounting Plate

144485764
FA1E705-75: RNCC: 3 | RNVC: 2

2 Jul 1991

5340-14-515-0897
Retaining Clip

145150897
87-47-215-11-461: RNCC: 3 | RNVC: 2

6 Jul 1999

5340-14-202-5356
Loop Clamp

142025356
51115305004: RNCC: 3 | RNVC: 2
A0021-25S04: RNCC: 5 | RNVC: 2
25S4: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-14-549-6638
Retaining Strap

145496638
MC201-215320-00: RNCC: 3 | RNVC: 2

26 Apr 2006

5340-14-533-5809
Suction Cup

145335809
230-155: RNCC: 3 | RNVC: 2
SC020276: RNCC: 6 | RNVC: 9

12 Feb 2003

5340-14-412-2177
Bumper

144122177
332A24-0594-21: RNCC: 3 | RNVC: 2

8 Oct 1986

5340-14-507-5327
Plug Button

145075327
332P65-1466-00: RNCC: 3 | RNVC: 2

16 Jul 1998

5340-14-335-0524
Handwheel

143350524
MAT137-007F4AVIORB: RNCC: 3 | RNVC: 2
GSM137-007F26AVI0RB: RNCC: 5 | RNVC: 2
GSM137-07F26AVI0RB: RNCC: 5 | RNVC: 2

2 Jun 1976

5340-14-459-7344
Loop Holder

144597344
LN321022REP8LAG3-L32X32X3: RNCC: 3 | RNVC: 2
RAB0195: RNCC: 5 | RNVC: 2

15 Dec 1992

5340-14-541-5136
Access Cover

145415136
1091384-001: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-551-4965
Angle Bracket

145514965
RA1B705956441N1: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-256-8126
Access Cover

142568126
31493: RNCC: 3 | RNVC: 9

1 Jan 1969

5340-14-546-6936
Angle Bracket

145466936
5010631502: RNCC: 3 | RNVC: 2

2 Aug 2005

5340-14-505-7421
Bumper

145057421
6070013: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-548-5613
Mounting Bracket

145485613
5010465709: RNCC: 3 | RNVC: 2

26 Jan 2006

5340-14-439-8738
Mounting Plate

144398738
905929: RNCC: 3 | RNVC: 2
905929: RNCC: 5 | RNVC: 2
905929: RNCC: 5 | RNVC: 9

29 May 1990

5340-14-394-9554
Corner Brace

143949554
29665074: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-449-0197
Access Cover

144490197
721B7004: RNCC: 3 | RNVC: 2
89469796: RNCC: 5 | RNVC: 2

24 Jul 1991

5340-14-489-5946
Loop Clamp

144895946
SUPPO92327A00: RNCC: 3 | RNVC: 2
SUPPO92327X00: RNCC: 5 | RNVC: 9

6 Aug 1997

5340-14-479-0195
Bumper

144790195
6304001801: RNCC: 3 | RNVC: 2
F300 0T 020 6313: RNCC: 5 | RNVC: 9

6 Dec 1995

5340-14-393-0126
Clamping Catch

143930126
TL100AXE6L: RNCC: 3 | RNVC: 2
N7332210814: RNCC: 5 | RNVC: 2

12 Apr 1984

5340-14-404-7005
Angle Bracket

144047005
16684894: RNCC: 3 | RNVC: 2

20 Nov 1985

5340-14-467-4118
Mounting Plate

144674118
1060929K00: RNCC: 3 | RNVC: 2

12 Jan 1994

5340-14-512-5780
Rod End Clevis

145125780
3BM02206AAAA: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-464-7716
Mounting Bracket

144647716
365A65-3304-10: RNCC: 3 | RNVC: 2

1 Sep 1993

5340-14-204-8782
Loop Clamp

142048782
ASNA0021-35S12: RNCC: 1 | RNVC: 2
511153050121: RNCC: 3 | RNVC: 2
35S12: RNCC: 5 | RNVC: 2
BR791-12: RNCC: 5 | RNVC: 2
A0021-35S12: RNCC: 5 | RNVC: 2
A0021-35S12: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-14-539-3559
Mounting Plate

145393559
AL100040: RNCC: 3 | RNVC: 2

7 Jan 2004

5340-14-352-6330
Angle Bracket

143526330
1051206900: RNCC: 3 | RNVC: 2
DAH1051206900: RNCC: 5 | RNVC: 9

14 Nov 1978

5340-14-289-7902
Mending Plate

142897902
16039393: RNCC: 3 | RNVC: 2
16039393: RNCC: 5 | RNVC: 2
16039393: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-507-1593
Case Corner

145071593
APRAFW3R: RNCC: 3 | RNVC: 2

17 Jun 1998

5340-14-518-9933
Mounting Plate

145189933
707465: RNCC: 3 | RNVC: 2

1 Mar 2000

5340-14-482-9417
Pipe Hanger

144829417
78733-050-041: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-519-0102
Mounting Plate

145190102
809613: RNCC: 3 | RNVC: 2

1 Mar 2000

5340-14-520-1683
Bow Handle

145201683
20859395: RNCC: 3 | RNVC: 2
20859395: RNCC: 3 | RNVC: 9

17 May 2000

5340-14-032-2822
Butt Hinge

140322822
4003-2020-4-1: RNCC: 3 | RNVC: 2

6 Sep 1982

5340-14-544-4059
Mounting Bracket

145444059
5001864780: RNCC: 3 | RNVC: 2

27 Jan 2005

5340-14-541-9687
Mounting Plate

145419687
20008-751: RNCC: 3 | RNVC: 2
502112002040A: RNCC: 3 | RNVC: 9
2 0008-751: RNCC: 5 | RNVC: 2

2 Jul 2004

5340-14-458-7836
Mounting Plate

144587836
MN03/12-02-66: RNCC: 3 | RNVC: 2
MN03/12-08-66: RNCC: 5 | RNVC: 2

4 Nov 1992

5340-14-525-2874
Bumper

145252874
BF20/12: RNCC: 3 | RNVC: 2

23 May 2001

5340-14-511-6486
Mounting Bracket

145116486
1-625-08-03-1: RNCC: 3 | RNVC: 2
1-625-08-02: RNCC: 5 | RNVC: 2

6 Jan 1999

5340-14-542-1234
Lock Bolt

145421234
5302835-045-04-B: RNCC: 3 | RNVC: 2
5302835-045-04B: RNCC: 5 | RNVC: 2

7 Jul 2004

5340-14-445-4049
Mounting Plate

144454049
98-01FH92-1: RNCC: 3 | RNVC: 2
9801 FH 92 1 VI REP: RNCC: 5 | RNVC: 9

13 Feb 1991

5340-14-513-8037
Access Cover

145138037
DE21775: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-14-348-7037
Anchor Strap

143487037
1115303: RNCC: 3 | RNVC: 2
1115303: RNCC: 5 | RNVC: 2

19 Apr 1978

5340-14-521-3542
Self-Locking Insert

145213542
27152187-7: RNCC: 3 | RNVC: 2

20 Jul 2000

5340-14-295-3027
Mortise Lock Set

142953027
26250272: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-407-3947
Rod End Connector

144073947
42395: RNCC: 3 | RNVC: 2

12 Feb 1986

5340-14-468-6519
Arched Cushion

144686519
MAT169-0012F22DE32: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-14-325-6217
Pipe Hanger

143256217
121B71-600-26-2: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-406-2419
Bow Handle

144062419
8942-32: RNCC: 3 | RNVC: 2
8989C9: RNCC: 5 | RNVC: 2
9222514480: RNCC: 5 | RNVC: 2
9253450480: RNCC: 5 | RNVC: 2

8 Jan 1986

5340-14-297-9915
Handwheel

142979915
NO PRIMARY REF14-297-9915: RNCC: 3 | RNVC: 2
52540: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-528-6763
Mounting Plate

145286763
232097: RNCC: 3 | RNVC: 2
SAE2133-16-1: RNCC: 3 | RNVC: 2

5 Feb 2002

5340-14-204-3773
Plug Button

142043773
501-200-056-0: RNCC: 3 | RNVC: 2
101-205-014-1: RNCC: 5 | RNVC: 2
101-205-014-1-01: RNCC: 5 | RNVC: 2
85-100-5018: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-14-368-8334
Runner

143688334
J00986-01-1100P009: RNCC: 3 | RNVC: 2

10 Mar 1981

5340-14-383-6156
Mounting Plate

143836156
TB30-67063-101: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-339-4639
Rod End Connector

143394639
M3C223-17-810: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-490-5872
Access Cover

144905872
5501-020-0: RNCC: 3 | RNVC: 2

2 Oct 1997

5340-14-534-1058
Mounting Bracket

145341058
332A67-1289-01: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-386-5678
Access Cover

143865678
995585-100: RNCC: 3 | RNVC: 2
995585-100: RNCC: 5 | RNVC: 2
995585-100: RNCC: 5 | RNVC: 9

24 Aug 1983

5340-14-377-7894
Plug Button

143777894
268-2M845-1P15: RNCC: 3 | RNVC: 9
PA268-2M845-1P15: RNCC: 5 | RNVC: 2
PA268-2M845-1P15: RNCC: 5 | RNVC: 9

10 Jun 1982

5340-14-530-7247
Detent Plunger

145307247
03070-05: RNCC: 3 | RNVC: 2
0342 050: RNCC: 5 | RNVC: 2
0342-050: RNCC: 5 | RNVC: 2
0342050: RNCC: 5 | RNVC: 2

3 Jul 2002

5340-14-341-3315
Pipe Hanger

143413315
262-10-71320-07: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-524-7021
Mounting Bracket

145247021
T321A2001201: RNCC: 3 | RNVC: 2

5 Apr 2001

5340-14-433-2800
Mounting Bracket

144332800
160H742537-02: RNCC: 3 | RNVC: 2

19 Jul 1989

5340-14-488-2413
Mounting Bracket

144882413
25649852: RNCC: 3 | RNVC: 2
2-564985-2: RNCC: 5 | RNVC: 2

23 Apr 1997

5340-14-467-2600
Mounting Bracket

144672600
EDM1119: RNCC: 3 | RNVC: 2
39515375: RNCC: 5 | RNVC: 2

21 Dec 1993

5340-14-515-1192
Angle Bracket

145151192
47139058: RNCC: 3 | RNVC: 2
47139058: RNCC: 5 | RNVC: 2

7 Jul 1999

5340-14-467-2007
Shimmy Damper

144672007
2510107903-01: RNCC: 3 | RNVC: 2
F300 0T 015 3285: RNCC: 5 | RNVC: 9

21 Dec 1993

5340-14-516-8026
Mounting Bracket

145168026
5001008726: RNCC: 3 | RNVC: 2

18 Oct 1999

5340-14-554-4796
Bumper

145544796
82388551000: RNCC: 3 | RNVC: 2

12 Jul 2007

5340-14-539-4239
Strap Fastener Loop

145394239
21027463-00: RNCC: 3 | RNVC: 2
21027463-8: RNCC: 5 | RNVC: 2

14 Jan 2004

5340-14-441-1907
Mounting Plate

144411907
A2800-1-319A: RNCC: 3 | RNVC: 2
91496268: RNCC: 5 | RNVC: 2

22 Aug 1990

5340-14-358-2718
Retaining Strap

143582718
NO PRIMARY REF14-358-2718: RNCC: 3 | RNVC: 2
0134B318: RNCC: 5 | RNVC: 9

13 Aug 1979

5340-14-364-4074
Retaining Strap

143644074
A11B602221003: RNCC: 3 | RNVC: 2

7 Aug 1980

5340-14-280-4472
Retaining Strap

142804472
23031240: RNCC: 3 | RNVC: 2
23031240-3: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-355-4953
Cushioning Pad

143554953
321A92-2110-65: RNCC: 3 | RNVC: 2
85-689-4951: RNCC: 6 | RNVC: 9

19 Mar 1979

5340-14-438-4849
Metal Grille

144384849
332A61-2346-02: RNCC: 3 | RNVC: 2

21 Mar 1990

5340-14-520-5066
Arched Cushion

145205066
MAT169-0012F22DE15: RNCC: 3 | RNVC: 2

19 May 2000

5340-14-292-1473
Runner

142921473
GSM424-047F8: RNCC: 3 | RNVC: 2
301MA083REP10: RNCC: 5 | RNVC: 2
GSM424-47F8: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-448-3777
Locking Stay

144483777
SLR201-210-410: RNCC: 3 | RNVC: 2

26 Jun 1991

5340-14-419-1653
Mending Plate

144191653
AC5-31-00010: RNCC: 3 | RNVC: 2

8 Oct 1987

5340-14-486-5080
Mortise Lock Set

144865080
L1352042: RNCC: 3 | RNVC: 2
L13520-42: RNCC: 5 | RNVC: 2
P13520-42L: RNCC: 5 | RNVC: 2

21 Mar 1997

5340-14-429-8837
Loop Clamp

144298837
108-08: RNCC: 3 | RNVC: 2
DS108-08: RNCC: 5 | RNVC: 2
DS108/08: RNCC: 5 | RNVC: 2

15 Feb 1989

5340-14-501-5747
Pawl Fastener

145015747
1000-U197: RNCC: 3 | RNVC: 2
1000U197: RNCC: 5 | RNVC: 2
SYB3365: RNCC: 5 | RNVC: 2

5 Nov 1997

5340-14-383-9599
Loop Clamp

143839599
RSGU1100-7-20: RNCC: 3 | RNVC: 2

4 May 1983

5340-14-472-8875
Access Cover

144728875
332A61-4735-22: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-14-485-5697
Access Cover

144855697
332A58-0018-0901: RNCC: 3 | RNVC: 2

29 Jan 1997

5340-14-477-1554
Rod End Clevis

144771554
1050-58-102-07-0: RNCC: 3 | RNVC: 2
85-695-4034: RNCC: 6 | RNVC: 9

26 Jul 1995

5340-14-349-1369
Rod End Clevis

143491369
300-690-001P: RNCC: 3 | RNVC: 2
001406010A: RNCC: 5 | RNVC: 2

19 Apr 1978

5340-14-300-9605
Bumper

143009605
341A92-1126-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-529-0008
Butt Hinge

145290008
42-2-4083: RNCC: 3 | RNVC: 2
347-8614: RNCC: 5 | RNVC: 2

27 Feb 2002

5340-14-042-0022
Rod End Clevis

140420022
121S77-250-04-0: RNCC: 3 | RNVC: 2

7 Oct 1976

5340-14-205-4763
Access Cover

142054763
612-990-001-0: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-515-8777
Angle Bracket

145158777
312-00096-039: RNCC: 3 | RNVC: 2

20 Aug 1999

5340-14-366-8674
Angle Bracket

143668674
330A75-3153-20: RNCC: 3 | RNVC: 2

20 Nov 1980

5340-14-287-1146
Control Rod

142871146
4-444-00P12-01AB: RNCC: 3 | RNVC: 2
JGA04-06: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-280-6447
Angle Bracket

142806447
100429: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-031-3873
Angle Bracket

140313873
A11A262100036: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-461-6047
Bow Handle

144616047
40146450: RNCC: 3 | RNVC: 2

17 Mar 1993

5340-14-040-9114
Mending Plate

140409114
16129661: RNCC: 3 | RNVC: 2
16129661: RNCC: 5 | RNVC: 2
16129661: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-412-4126
Clamping Catch

144124126
16-7-3411: RNCC: 3 | RNVC: 2
7920041482: RNCC: 5 | RNVC: 2

15 Oct 1986

5340-14-449-1897
Mounting Bracket

144491897
7M537: RNCC: 3 | RNVC: 2

6 Aug 1991

5340-14-381-4731
Runner

143814731
1113: RNCC: 3 | RNVC: 2
574025103: RNCC: 5 | RNVC: 2

25 Jan 1983

5340-14-501-6979
Butt Hinge

145016979
45278901: RNCC: 3 | RNVC: 2
45278901: RNCC: 3 | RNVC: 9

5 Nov 1997

5340-14-298-3513
Retaining Band

142983513
180542: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-481-0553
Runner

144810553
1302131P217: RNCC: 3 | RNVC: 2

18 Apr 1996

5340-14-502-4627
Blank Panel

145024627
PLAQU92875X00: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-458-9140
Mounting Bracket

144589140
100A103338A: RNCC: 3 | RNVC: 2

5 Nov 1992

5340-14-537-4482
Bow Handle

145374482
MLFM000369: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-507-6426
Synchro Clamp

145076426
96183046: RNCC: 3 | RNVC: 2

7 Aug 1998

5340-14-398-9018
Bail Handle

143989018
PR305PVGAMC2420IR: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-416-7959
Butt Hinge

144167959
JVA-T316-08-01: RNCC: 3 | RNVC: 2
JVAT316-08-01: RNCC: 5 | RNVC: 2

25 Jun 1987

5340-14-501-5293
Mounting Bracket

145015293
01-898-600: RNCC: 3 | RNVC: 2

29 Oct 1997

5340-14-409-6997
Butt Hinge

144096997
CC.422-ZB: RNCC: 3 | RNVC: 2
CC422ZB: RNCC: 5 | RNVC: 2

28 May 1986

5340-14-217-5719
Dashpot Piston

142175719
253-5M662P27D: RNCC: 3 | RNVC: 9
PA253-5M662P27D: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-531-8199
Mounting Bracket

145318199
341A62-5005-40: RNCC: 3 | RNVC: 2

18 Sep 2002

5340-14-311-7709
Control Rod

143117709
NO PRIMARY REF14-311-7709: RNCC: 3 | RNVC: 2
C10025: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-464-9970
Blank Panel

144649970
365P61-3850-23: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-473-8400
Mounting Bracket

144738400
332A67-7814-01: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-301-7832
Mending Plate

143017832
3097-06-05-021: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-409-6688
Retaining Strap

144096688
R4P706-511: RNCC: 3 | RNVC: 2

28 May 1986

5340-14-442-2667
Mounting Plate

144422667
1194-01-04: RNCC: 3 | RNVC: 2

8 Oct 1990

5340-14-442-5808
Retaining Strap

144425808
775141-19: RNCC: 3 | RNVC: 2

22 Oct 1990

5340-14-548-4946
Mounting Bracket

145484946
7420785844: RNCC: 3 | RNVC: 2

23 Jan 2006

5340-14-227-8941
Webbing Strap

142278941
NO PRIMARY REF14-227-8941: RNCC: 3 | RNVC: 2
61470-002: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-534-0915
Synchro Clamp

145340915
330A85-0173-37: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-503-9601
Butt Hinge

145039601
3342740: RNCC: 3 | RNVC: 2

4 Feb 1998

5340-14-213-1555
Mounting Plate

142131555
T863-56M1P72A: RNCC: 3 | RNVC: 2
T86356M1P72: RNCC: 5 | RNVC: 2

1 Jan 1964

5340-14-501-9591
Truss Fairlead

145019591
332A61-3730-20: RNCC: 3 | RNVC: 2

19 Nov 1997

5340-14-288-9838
Rod End Clevis

142889838
A10-76-513-03-0: RNCC: 3 | RNVC: 2
A10-76-513-03-0: RNCC: 3 | RNVC: 2
A10-76-513-03-0: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-531-2280
Mounting Bracket

145312280
341A69-6502-00: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-14-355-8635
Access Cover

143558635
C180-1-72: RNCC: 3 | RNVC: 2

5 Apr 1979

5340-14-451-5355
Bumper

144515355
781053-60: RNCC: 3 | RNVC: 2
91457128: RNCC: 5 | RNVC: 2

21 Nov 1991

5340-14-469-1050
Mounting Bracket

144691050
305-347-303-0: RNCC: 3 | RNVC: 2

6 Apr 1994

5340-14-278-3296
Pipe Hanger

142783296
160-11523-15: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-469-6822
Pipe Hanger

144696822
78733-016-022B: RNCC: 3 | RNVC: 2

4 May 1994

5340-14-467-5760
Anchor Strap

144675760
312-04497-001: RNCC: 3 | RNVC: 2

19 Jan 1994

5340-14-334-8446
Tubular Fairlead

143348446
826-0-10-27: RNCC: 3 | RNVC: 2

2 Jun 1976

5340-14-460-1818
Mounting Bracket

144601818
LN214-001FIA04: RNCC: 3 | RNVC: 2
RAB0241: RNCC: 5 | RNVC: 2

14 Jan 1993

5340-14-539-7455
Cushioning Pad

145397455
21034082-00: RNCC: 3 | RNVC: 2
21034082-5: RNCC: 5 | RNVC: 2

5 Feb 2004

5340-14-231-2522
Access Cover

142312522
253-5M311P98A: RNCC: 3 | RNVC: 9
PA253-5M311P98A: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-373-8203
Rim Lock Set

143738203
NO PRIMARY REF14-373-8203: RNCC: 3 | RNVC: 2
6600-04MNFH001: RNCC: 5 | RNVC: 9

13 Nov 1981

5340-14-439-8318
Mounting Plate

144398318
332A58-0055-EV: RNCC: 3 | RNVC: 2

23 May 1990

5340-14-450-2201
Handwheel

144502201
NO PRIMARY REF14-450-2201: RNCC: 3 | RNVC: 2
628 543: RNCC: 5 | RNVC: 2
91690879: RNCC: 5 | RNVC: 2
628543: RNCC: 5 | RNVC: 2
0628 543: RNCC: 5 | RNVC: 9

25 Sep 1991

5340-14-511-6285
Loop Clamp

145116285
75109-20MJ: RNCC: 3 | RNVC: 2

6 Jan 1999

5340-14-468-6513
Arched Cushion

144686513
MAT169-0012F22DE21: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-14-501-4636
Handle Grip

145014636
NO PRIMARY REF14-501-4636: RNCC: 3 | RNVC: 2
NNP5340844556196: RNCC: 5 | RNVC: 9

29 Oct 1997

5340-14-521-5741
Retaining Strap

145215741
160-88974-04: RNCC: 3 | RNVC: 2

23 Aug 2000

5340-14-293-0512
Bumper

142930512
5-01-158-009: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-266-9417
Bumper

142669417
3-444: RNCC: 3 | RNVC: 2
TR8053-1: RNCC: 3 | RNVC: 2
1MSSB282: RNCC: 5 | RNVC: 2
38211055A4: RNCC: 5 | RNVC: 2
1MSSB282: RNCC: 5 | RNVC: 9
38211055A4: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-531-2261
Mounting Bracket

145312261
341A66-6127-20: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-14-327-6685
Loop Clamp

143276685
3-2-2606-01-25: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-368-3253
Angle Bracket

143683253
NO PRIMARY REF14-368-3253: RNCC: 3 | RNVC: 2
5709002: RNCC: 5 | RNVC: 9
57-09-002: RNCC: 5 | RNVC: 9

20 Feb 1981

5340-14-438-0628
Access Cover

144380628
21501575-01: RNCC: 3 | RNVC: 2

7 Mar 1990

5340-14-387-8942
Loop Clamp

143878942
3-2602-25A: RNCC: 3 | RNVC: 2
3-2602-25A: RNCC: 5 | RNVC: 2

12 Oct 1983

5340-14-309-7753
Retaining Strap

143097753
502-515-128-0: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-552-7541
Snap Hook

145527541
8-0GO: RNCC: 3 | RNVC: 2
436877: RNCC: 5 | RNVC: 2

29 Jan 2007

5340-14-404-5720
Angle Bracket

144045720
36447118: RNCC: 3 | RNVC: 2

20 Nov 1985

5340-14-508-5236
Mounting Bracket

145085236
10200877: RNCC: 3 | RNVC: 2

16 Sep 1998

5340-14-253-8826
Strap Hinge

142538826
LN331087-322112401: RNCC: 2 | RNVC: 2
LN331087-322112401: RNCC: 3 | RNVC: 2
32-211-24-01: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-14-522-9622
Mounting Bracket

145229622
ST159-2M664P116: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-14-459-2912
Luggage Handle

144592912
MAT685-0137: RNCC: 3 | RNVC: 2

19 Nov 1992

5340-14-480-7588
Access Cover

144807588
452-13974-000: RNCC: 3 | RNVC: 2
452-13974-000: RNCC: 5 | RNVC: 2

28 Mar 1996

5340-14-449-8345
Runner

144498345
993-07-02: RNCC: 3 | RNVC: 2

11 Sep 1991

5340-14-226-0442
Handwheel

142260442
NO PRIMARY REF14-226-0442: RNCC: 3 | RNVC: 2
AE130081: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-476-0329
Eye Hook

144760329
204213004: RNCC: 3 | RNVC: 2
PAA42-13-004: RNCC: 5 | RNVC: 2

17 May 1995

5340-14-541-1019
Rod End Clevis

145411019
21231779-00: RNCC: 3 | RNVC: 2
21231779-1: RNCC: 5 | RNVC: 2

14 May 2004

5340-14-339-4596
Mounting Plate

143394596
501-705-045-0: RNCC: 3 | RNVC: 2
501-705-510-0: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-507-0701
Angle Bracket

145070701
FC89001-1: RNCC: 3 | RNVC: 2
FC89-001-1: RNCC: 5 | RNVC: 2

10 Jun 1998

5340-14-310-2284
Access Cover

143102284
3242000: RNCC: 3 | RNVC: 2
3-24-20-00: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-330-7991
Bridge Clamp

143307991
GSM424-059F13: RNCC: 3 | RNVC: 2
GSM424-59F13: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-497-7671
Mounting Plate

144977671
Y07109-01-1000P12: RNCC: 3 | RNVC: 2

15 Oct 1997

5340-14-541-7354
Access Cover

145417354
457-10058-001: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-477-0961
Swivel Caster

144770961
127.0427: RNCC: 3 | RNVC: 9
EL57-5-3: RNCC: 5 | RNVC: 2
SH4-4-2: RNCC: 5 | RNVC: 2
CR18: RNCC: 5 | RNVC: 2
MPR127.0427: RNCC: 5 | RNVC: 9
127-4NBR: RNCC: 5 | RNVC: 9

26 Jul 1995

5340-14-284-7579
Angle Bracket

142847579
121A21-256-03-0: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-294-1323
Angle Bracket

142941323
3615-21-3: RNCC: 3 | RNVC: 2
12513143: RNCC: 3 | RNVC: 2
3615-21-3IS0: RNCC: 5 | RNVC: 2
12513143: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-360-8124
Butt Hinge

143608124
6232-1215: RNCC: 3 | RNVC: 2

19 Dec 1979

5340-14-444-9364
Loop Clamp

144449364
167-060-008: RNCC: 3 | RNVC: 2
CAE00976: RNCC: 5 | RNVC: 2

29 Jan 1991

5340-14-436-4028
Clamping Catch

144364028
GR78-EIB: RNCC: 3 | RNVC: 2
1003758K00: RNCC: 5 | RNVC: 2

20 Dec 1989

5340-14-392-6196
Rod End Clevis

143926196
07620-12: RNCC: 3 | RNVC: 2
0762 120: RNCC: 5 | RNVC: 2
762-12: RNCC: 5 | RNVC: 2
762-120: RNCC: 5 | RNVC: 2
M4ZS731D1019: RNCC: 5 | RNVC: 2
762 120: RNCC: 5 | RNVC: 2

7 Apr 1984

5340-14-264-1702
Loop Clamp

142641702
51100005032: RNCC: 3 | RNVC: 2
15NA32: RNCC: 5 | RNVC: 2
55217-332DB: RNCC: 5 | RNVC: 2
15N32: RNCC: 5 | RNVC: 2
A0021-15N32: RNCC: 5 | RNVC: 2
55217-332-000DB: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-522-3246
Mounting Bracket

145223246
10488283: RNCC: 3 | RNVC: 2

19 Oct 2000

5340-14-504-6271
Angle Bracket

145046271
510558505: RNCC: 3 | RNVC: 2
510558505: RNCC: 5 | RNVC: 9

25 Feb 1998

5340-14-459-5867
Retaining Strap

144595867
5171590800: RNCC: 3 | RNVC: 2

10 Dec 1992

5340-14-542-1327
Mounting Bracket

145421327
10663762: RNCC: 3 | RNVC: 2

8 Jul 2004

5340-14-372-1137
Runner

143721137
BS645: RNCC: 3 | RNVC: 2

1 Sep 1981

5340-14-465-0505
Bumper

144650505
035536N02TRA: RNCC: 3 | RNVC: 2
034536N: RNCC: 5 | RNVC: 2

8 Sep 1993

5340-14-555-8636
Mounting Bracket

145558636
62100205AA: RNCC: 3 | RNVC: 2

19 Dec 2007

5340-14-399-8865
Loop Clamp

143998865
986524: RNCC: 3 | RNVC: 2
986524: RNCC: 5 | RNVC: 9

11 Apr 1985

5340-14-475-0439
Mounting Plate

144750439
201354: RNCC: 3 | RNVC: 2
89170622: RNCC: 5 | RNVC: 2

16 Mar 1995

5340-14-508-1014
Loop Clamp

145081014
A07110554: RNCC: 3 | RNVC: 2
PPSHR1L22PP: RNCC: 3 | RNVC: 2
A07110554: RNCC: 5 | RNVC: 9

26 Aug 1998

5340-14-384-7465
Permanent Magnet

143847465
96101045: RNCC: 3 | RNVC: 2
96101045: RNCC: 5 | RNVC: 9

2 Jun 1983

5340-14-454-8720
Retaining Band

144548720
5000743023: RNCC: 3 | RNVC: 2

24 Apr 1992

5340-14-479-6785
Runner

144796785
11095D440823: RNCC: 3 | RNVC: 2

31 Jan 1996

5340-14-413-9620
Retaining Strap

144139620
ST400S60P139: RNCC: 3 | RNVC: 2
BJQS60P139: RNCC: 5 | RNVC: 2

22 Jan 1987

5340-14-475-0204
Angle Bracket

144750204
232813: RNCC: 3 | RNVC: 2
68646: RNCC: 5 | RNVC: 2

16 Mar 1995

5340-14-473-9477
Angle Bracket

144739477
45271066: RNCC: 3 | RNVC: 2
45271066: RNCC: 3 | RNVC: 9

18 Jan 1995

5340-14-573-6518
Coating Plate

145736518
260670583: RNCC: 3 | RNVC: 2

29 Oct 2012

5340-14-418-4882
Angle Bracket

144184882
46387: RNCC: 3 | RNVC: 2

26 Aug 1987

5340-14-463-5652
Mounting Bracket

144635652
39533425: RNCC: 3 | RNVC: 2
39533425: RNCC: 5 | RNVC: 9

17 Jun 1993

5340-14-345-0731
Mending Plate

143450731
BFC10213: RNCC: 3 | RNVC: 2
BY148A10213: RNCC: 5 | RNVC: 2

5 Oct 1977

5340-14-502-3386
Pipe Hanger

145023386
307-851-603-0: RNCC: 3 | RNVC: 2

9 Dec 1997

5340-14-502-3106
Retaining Strap

145023106
95331793: RNCC: 3 | RNVC: 2
9-533179-3: RNCC: 5 | RNVC: 2

9 Dec 1997

5340-14-511-1337
Support Hook

145111337
F10A721810006: RNCC: 3 | RNVC: 2
85-694-3387: RNCC: 6 | RNVC: 9

2 Dec 1998

5340-14-496-9078
Screw Hook

144969078
NO PRIMARY REF14-496-9078: RNCC: 3 | RNVC: 2
270-01-89214: RNCC: 5 | RNVC: 9
F300 0T 022 2574: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-526-3142
Mounting Bracket

145263142
304-092-602-0: RNCC: 3 | RNVC: 2

18 Jul 2001

5340-14-310-4878
Rod End Connector

143104878
A10-94-934-21-0: RNCC: 3 | RNVC: 2
A10-94-934-21-0: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-306-1597
Loop Clamp

143061597
NO PRIMARY REF14-306-1597: RNCC: 3 | RNVC: 2
13941626-9: RNCC: 5 | RNVC: 2
12230773-3: RNCC: 5 | RNVC: 2
CN15-30: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-503-0012
Mounting Bracket

145030012
330A22-2497-22: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-466-8512
Blank Panel

144668512
40-6-4E5-08: RNCC: 3 | RNVC: 2
89234666: RNCC: 5 | RNVC: 2
40-6-4E5-08: RNCC: 5 | RNVC: 9

3 Dec 1993

5340-14-549-6146
Support Hook

145496146
CC201-615500-30: RNCC: 3 | RNVC: 2

21 Apr 2006

5340-14-385-5966
Retaining Strap

143855966
CRP23-21-26: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-435-8896
Swivel Caster

144358896
HP1BD200-23R02: RNCC: 3 | RNVC: 2
0225999R00: RNCC: 5 | RNVC: 2

28 Nov 1989

5340-14-441-3169
Mounting Plate

144413169
CIB3-002: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-389-4675
Angle Bracket

143894675
365A58-1102MH: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-331-6000
Retaining Strap

143316000
J00650-01-0400P034: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-440-5376
Loop Clamp

144405376
NO PRIMARY REF14-440-5376: RNCC: 3 | RNVC: 2
45017: RNCC: 5 | RNVC: 2

17 Jul 1990

5340-14-549-9168
Mounting Bracket

145499168
2092477-001: RNCC: 3 | RNVC: 2

18 May 2006

5340-14-519-3092
Mounting Bracket

145193092
332P68-1405-01: RNCC: 3 | RNVC: 2

15 Mar 2000

5340-14-280-5611
Mounting Plate

142805611
NO PRIMARY REF14-280-5611: RNCC: 3 | RNVC: 2
42051: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-510-7793
Bolt And Spacer Kit

145107793
9019871: RNCC: 3 | RNVC: 2

12 Nov 1998

5340-14-502-3622
Mounting Bracket

145023622
0390710490: RNCC: 3 | RNVC: 2

9 Dec 1997

5340-14-549-9037
Angle Bracket

145499037
1091698: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-392-9740
Plug Button

143929740
0000741099: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-545-8456
Access Cover

145458456
0827870: RNCC: 3 | RNVC: 2

19 May 2005

5340-14-528-9462
Loop Clamp

145289462
EN4113F08WH: RNCC: 2 | RNVC: 2

27 Feb 2002

5340-14-503-8931
Detent Plunger

145038931
ISO5NACA14: RNCC: 3 | RNVC: 2
F0024120: RNCC: 5 | RNVC: 9

4 Feb 1998

5340-14-455-1200
Angle Bracket

144551200
0000790848: RNCC: 3 | RNVC: 2

1 May 1992

5340-14-434-3619
Mounting Bracket

144343619
39529495: RNCC: 3 | RNVC: 2
39529495: RNCC: 5 | RNVC: 9

20 Sep 1989

5340-14-497-1911
Mounting Bracket

144971911
94023004: RNCC: 3 | RNVC: 2
F300 0T 022 8028: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-555-5556
Retaining Strap

145555556
DE2B203200441: RNCC: 3 | RNVC: 2

27 Nov 2007

5340-14-509-1992
Mounting Bracket

145091992
46236119: RNCC: 3 | RNVC: 2
46236119: RNCC: 3 | RNVC: 9

21 Oct 1998

5340-14-519-8547
Mounting Plate

145198547
F1359574: RNCC: 3 | RNVC: 2

12 Apr 2000

5340-14-399-7053
Loop Clamp

143997053
970936: RNCC: 3 | RNVC: 2
970936: RNCC: 5 | RNVC: 9

6 Mar 1985

5340-14-456-8200
Mounting Bracket

144568200
67619: RNCC: 3 | RNVC: 2
5010059875: RNCC: 5 | RNVC: 2
91699683: RNCC: 5 | RNVC: 2

24 Jul 1992

5340-14-544-9679
Pipe Hanger

145449679
5010367342: RNCC: 3 | RNVC: 2

8 Mar 2005

5340-14-549-3516
Blank Panel

145493516
GZ4179Y02: RNCC: 3 | RNVC: 2

24 Mar 2006

5340-14-549-8261
Mounting Bracket

145498261
2092752: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-413-2475
Runner

144132475
2157009: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-14-477-7424
Butt Hinge

144777424
1056669D00: RNCC: 3 | RNVC: 2

20 Sep 1995

5340-14-549-9703
Mounting Bracket

145499703
T327A1001213: RNCC: 3 | RNVC: 2

19 May 2006

5340-14-257-9276
Angle Bracket

142579276
L282290: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-520-0139
Mounting Plate

145200139
10371584: RNCC: 3 | RNVC: 2

3 May 2000

5340-14-497-3527
Loop Clamp

144973527
547583: RNCC: 3 | RNVC: 2
54530: RNCC: 3 | RNVC: 9
91767012: RNCC: 5 | RNVC: 2
F300 0T 023 0473: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-462-5427
Protection Bellows

144625427
T1209020H: RNCC: 3 | RNVC: 2

28 Apr 1993

5340-14-551-7361
Mounting Bracket

145517361
RA1M701926381A1N1: RNCC: 3 | RNVC: 2

19 Oct 2006

5340-14-547-0044
Angle Bracket

145470044
RA1M705934211A1N1: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-14-542-3008
Mounting Bracket

145423008
973106108: RNCC: 3 | RNVC: 2
973106108: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-511-0779
Mounting Plate

145110779
0000290: RNCC: 3 | RNVC: 2

2 Dec 1998

5340-14-263-4183
Handwheel

142634183
R404300: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-495-9445
Lock Key

144959445
SZ2531: RNCC: 3 | RNVC: 2
F300 0T 020 5573: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-338-7046
Retaining Strap

143387046
46300AA: RNCC: 3 | RNVC: 9
2049: RNCC: 5 | RNVC: 9
2113: RNCC: 5 | RNVC: 9

17 Dec 1976

5340-14-523-6678
Access Cover

145236678
J3726353: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-14-405-3170
Anchor Strap

144053170
F120090: RNCC: 3 | RNVC: 2

27 Nov 1985

5340-14-512-2337
Mounting Bracket

145122337
3BM00527AAAA: RNCC: 3 | RNVC: 2

8 Feb 1999

5340-14-500-6399
Mounting Plate

145006399
E64009998009: RNCC: 3 | RNVC: 2
F300 0T 024 6585: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-516-3595
Mounting Bracket

145163595
28710446: RNCC: 3 | RNVC: 2

22 Sep 1999

5340-14-530-7735
Mounting Bracket

145307735
7505059C00: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-14-524-3775
Cable Retractor

145243775
PTOURPI1A: RNCC: 3 | RNVC: 9

14 Mar 2001

5340-14-394-9171
Webbing Strap

143949171
20155885: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-321-3800
Retaining Clip

143213800
23713: RNCC: 3 | RNVC: 9

1 Jan 1975

5340-14-468-7382
Support Hook

144687382
PM1A711090110: RNCC: 3 | RNVC: 2
PM1A711090110: RNCC: 5 | RNVC: 2

16 Mar 1994

5340-14-399-0515
Mounting Plate

143990515
474305Y: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-535-5050
Cover Strip

145355050
10-250-830: RNCC: 3 | RNVC: 2
SZ10.250.830: RNCC: 3 | RNVC: 2

31 May 2003

5340-14-533-2504
Mounting Bracket

145332504
V103678D: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-14-554-5320
Bow Handle

145545320
SE10330: RNCC: 3 | RNVC: 2

18 Jul 2007

5340-14-526-3996
Bumper

145263996
970300050: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-522-9706
Mounting Plate

145229706
0319150130: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-14-367-4499
Case Corner

143674499
15168840: RNCC: 3 | RNVC: 2
15168840: RNCC: 5 | RNVC: 2
15168840: RNCC: 5 | RNVC: 9

11 Dec 1980

5340-14-549-8478
Mounting Bracket

145498478
F1262635: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-349-3018
Angle Bracket

143493018
127925: RNCC: 3 | RNVC: 2

22 May 1978

5340-14-317-5271
Rod End Clevis

143175271
321A27-9790-24: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-358-9454
Mounting Plate

143589454
NO PRIMARY REF14-358-9454: RNCC: 3 | RNVC: 2
11206-4: RNCC: 5 | RNVC: 9

7 Sep 1979

5340-14-398-9506
Loop Clamp

143989506
NO PRIMARY REF14-398-9506: RNCC: 3 | RNVC: 2
309-06972-0: RNCC: 5 | RNVC: 9
309069720: RNCC: 5 | RNVC: 9

6 Mar 1985

5340-14-302-1196
Mending Plate

143021196
A10-74-105-90-0: RNCC: 3 | RNVC: 2
A10-74-105-90-0: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-293-3970
Retaining Strap

142933970
NO PRIMARY REF14-293-3970: RNCC: 3 | RNVC: 2
0400410140: RNCC: 5 | RNVC: 2
9560110640: RNCC: 5 | RNVC: 2
53397: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-457-6504
Bumper

144576504
8210110-3: RNCC: 3 | RNVC: 9
870306316: RNCC: 5 | RNVC: 9
85-694-5737: RNCC: 6 | RNVC: 9

10 Sep 1992

5340-14-280-4385
Angle Bracket

142804385
23020930: RNCC: 3 | RNVC: 2
23020930-9: RNCC: 5 | RNVC: 2
EA51-9121: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-338-1376
Bow Handle

143381376
NO PRIMARY REF14-338-1376: RNCC: 3 | RNVC: 2
S273840-3: RNCC: 5 | RNVC: 9

6 Nov 1976

5340-14-307-5120
Angle Bracket

143075120
E4M704-17-05: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-527-8431
Mounting Plate

145278431
P-C32CB0101-902: RNCC: 3 | RNVC: 2
P-C32CB0101-902: RNCC: 5 | RNVC: 2

26 Nov 2001

5340-14-282-5398
Bumper

142825398
23020920: RNCC: 3 | RNVC: 2
EA31-2604: RNCC: 5 | RNVC: 2
23020920-5: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-375-3338
Quick Release Pin

143753338
702792-19: RNCC: 3 | RNVC: 2

26 Feb 1982

5340-14-261-9475
Retaining Strap

142619475
M129767: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-414-9991
Retaining Strap

144149991
ST400S60P171: RNCC: 3 | RNVC: 2

26 Mar 1987

5340-14-382-2377
Pipe Hanger

143822377
A11A231472010A3: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-539-5360
Cover Strip

145395360
SZ11.251.140: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-14-454-8136
Retaining Strap

144548136
3193713: RNCC: 3 | RNVC: 2

22 Apr 1992

5340-14-539-3576
Mounting Plate

145393576
AL100208: RNCC: 3 | RNVC: 2

7 Jan 2004

5340-14-540-2096
Mounting Bracket

145402096
MB1422F00: RNCC: 3 | RNVC: 2

11 Mar 2004

5340-14-422-8156
Mounting Plate

144228156
39452051: RNCC: 3 | RNVC: 2

17 Mar 1988

5340-14-526-1198
Mounting Plate

145261198
20 242 260 7180: RNCC: 3 | RNVC: 2

4 Jul 2001

5340-14-550-1522
Webbing Strap

145501522
500051: RNCC: 3 | RNVC: 2

5 Jun 2006

5340-14-341-1381
Runner

143411381
308911: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-550-9205
Angle Bracket

145509205
RA1M703117581: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-402-0428
Retaining Strap

144020428
219847: RNCC: 3 | RNVC: 2

26 Jun 1985

5340-14-396-4244
Mounting Plate

143964244
103201: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-375-5277
Butt Hinge

143755277
366A21-1161-00: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-343-6277
Angle Bracket

143436277
330A61-3418-21: RNCC: 3 | RNVC: 2

16 Jun 1977

5340-14-353-1134
Anchor Strap

143531134
RC55-101A: RNCC: 3 | RNVC: 2

8 Dec 1978

5340-14-393-8956
Angle Bracket

143938956
366A76-1201-21: RNCC: 3 | RNVC: 2

23 Jun 1984

5340-14-379-8382
Anchor Strap

143798382
3262-0120: RNCC: 3 | RNVC: 2

20 Oct 1982

5340-14-376-9131
Mending Plate

143769131
A32704: RNCC: 3 | RNVC: 2
85-800-9119: RNCC: 6 | RNVC: 9

28 Apr 1982

5340-14-473-8157
Mounting Plate

144738157
332A22-3058-20: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-281-2199
Rod End Connector

142812199
10100092: RNCC: 3 | RNVC: 2
10100092: RNCC: 5 | RNVC: 2
CHR10100092: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-276-0482
Expansion Shield

142760482
808002-00: RNCC: 3 | RNVC: 2
GRILLEBRUN20: RNCC: 5 | RNVC: 2
PLI0CHEVILLE4X20: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-490-2903
Loop Clamp

144902903
RSGU1200-3X12-15: RNCC: 3 | RNVC: 2

24 Sep 1997

5340-14-459-7356
Loop Holder

144597356
LN321022REP16LAG3-L32X32X3: RNCC: 3 | RNVC: 2
RAB0203: RNCC: 5 | RNVC: 2

15 Dec 1992

5340-14-227-9605
Rod End Connector

142279605
371642: RNCC: 3 | RNVC: 2
371642: RNCC: 6 | RNVC: 9

1 Jan 1966

5340-14-515-9263
Loop Clamp

145159263
ASNA0022-71N50: RNCC: 1 | RNVC: 2
61300005050: RNCC: 3 | RNVC: 2
ASNA0022-71N50: RNCC: 3 | RNVC: 2
71N50: RNCC: 5 | RNVC: 2
ASNA0022-71N50: RNCC: 5 | RNVC: 2
710005000: RNCC: 5 | RNVC: 2
A0022-71N50: RNCC: 5 | RNVC: 2
A0022-71N50: RNCC: 5 | RNVC: 2
ASNA0022-71N50: RNCC: 5 | RNVC: 2

26 Aug 1999

5340-14-449-9985
Anchor Strap

144499985
OCO7516752: RNCC: 3 | RNVC: 2
5000900082: RNCC: 5 | RNVC: 2
5000900082: RNCC: 5 | RNVC: 9
F300 0T 003 2606: RNCC: 6 | RNVC: 9

18 Sep 1991

5340-14-255-5274
Access Cover

142555274
70663446: RNCC: 3 | RNVC: 2
70663446: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-543-3817
Bail Handle

145433817
200300: RNCC: 3 | RNVC: 2

26 Oct 2004

5340-14-481-8974
Bail Handle

144818974
HSS831AH577: RNCC: 3 | RNVC: 2
89167389: RNCC: 5 | RNVC: 2

6 Jun 1996

5340-14-520-3582
Mounting Bracket

145203582
22115T022001: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-530-6666
Bridge Clamp

145306666
8034797B00: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-14-514-1407
Detent Plunger

145141407
1076188M00: RNCC: 3 | RNVC: 2

28 Apr 1999

5340-14-539-5363
Cover Strip

145395363
SZ11.251.154: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-14-541-2274
Mounting Bracket

145412274
10642997: RNCC: 3 | RNVC: 2

19 May 2004

5340-14-442-1734
Retaining Clip

144421734
20294138: RNCC: 3 | RNVC: 2

3 Oct 1990

5340-14-418-4868
Angle Bracket

144184868
61778: RNCC: 3 | RNVC: 2

26 Aug 1987

5340-14-461-2941
Angle Bracket

144612941
5000749192: RNCC: 3 | RNVC: 2
89287836: RNCC: 5 | RNVC: 2

3 Mar 1993

5340-14-523-6202
Mounting Plate

145236202
035523C: RNCC: 3 | RNVC: 2
X3143638: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-14-450-4898
Mounting Bracket

144504898
C36643: RNCC: 3 | RNVC: 2
326222: RNCC: 5 | RNVC: 2

9 Oct 1991

5340-14-516-3121
Loop Clamp

145163121
B9190: RNCC: 3 | RNVC: 2

20 Sep 1999

5340-14-392-6587
Mending Plate

143926587
4136P67: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-296-7381
Runner

142967381
13756: RNCC: 3 | RNVC: 2
GRVEU: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-532-1261
Bridge Clamp

145321261
5000988509: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-14-449-9722
Bumper

144499722
0846192L00: RNCC: 3 | RNVC: 2

18 Sep 1991

5340-14-510-0129
Handwheel

145100129
19004: RNCC: 3 | RNVC: 2
5340AA1136599: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-434-0376
Mounting Bracket

144340376
536025: RNCC: 3 | RNVC: 2

29 Aug 1989

5340-14-280-6550
Angle Bracket

142806550
100481: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-413-4989
Angle Bracket

144134989
132503: RNCC: 3 | RNVC: 2

17 Dec 1986

5340-14-416-6845
Angle Bracket

144166845
004680990E: RNCC: 3 | RNVC: 2

25 Jun 1987

5340-14-463-5344
Clamping Catch

144635344
GEP507ZB: RNCC: 3 | RNVC: 2

17 Jun 1993

5340-14-545-3617
Pipe Hanger

145453617
50A70: RNCC: 3 | RNVC: 2

7 Apr 2005

5340-14-480-3634
Loop Clamp

144803634
1085110B00: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-335-8701
Angle Bracket

143358701
191092: RNCC: 3 | RNVC: 2

24 Jul 1976

5340-14-475-4198
Mounting Plate

144754198
TS124020: RNCC: 3 | RNVC: 2

5 Apr 1995

5340-14-453-2831
Plug Button

144532831
RBE19-8550: RNCC: 3 | RNVC: 2
91727184: RNCC: 5 | RNVC: 2

12 Feb 1992

5340-14-339-2823
Expansion Plug

143392823
0232-07: RNCC: 3 | RNVC: 2
7903075014: RNCC: 3 | RNVC: 2
7932561331: RNCC: 3 | RNVC: 2
7561331000: RNCC: 5 | RNVC: 2
7561331100: RNCC: 5 | RNVC: 2
7932561331: RNCC: 5 | RNVC: 2
HG112-94B: RNCC: 5 | RNVC: 2
75-61-331-100: RNCC: 5 | RNVC: 9

18 Jan 1977

5340-14-499-5827
Runner

144995827
21541-01: RNCC: 3 | RNVC: 2
F300 0T 023 5546: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-367-4907
Quick Release Pin

143674907
A0023C06R35NW: RNCC: 1 | RNVC: 2
51453C6R35NW: RNCC: 3 | RNVC: 2
A0023C06R35N-W: RNCC: 5 | RNVC: 2
N7090145635: RNCC: 5 | RNVC: 2
51453C6R35NW: RNCC: 5 | RNVC: 2
55701C06R35NW: RNCC: 5 | RNVC: 9
55701C06R35N-W: RNCC: 5 | RNVC: 9

11 Dec 1980

5340-14-457-2823
Webbing Strap

144572823
ST406M75A26-15: RNCC: 3 | RNVC: 2

20 Aug 1992

5340-14-454-1776
Rim Latch

144541776
LN331-018 3222431-07: RNCC: 3 | RNVC: 2
322243107: RNCC: 5 | RNVC: 2

24 Mar 1992

5340-14-473-8237
Angle Bracket

144738237
332A32-3472-20: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-449-7624
Loop Clamp

144497624
75442000200: RNCC: 3 | RNVC: 2
320366-01: RNCC: 5 | RNVC: 2
43500779: RNCC: 5 | RNVC: 2

6 Sep 1991

5340-14-261-3128
Rod End Clevis

142613128
175-75-174: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-529-6913
Mounting Bracket

145296913
457-11175-000: RNCC: 3 | RNVC: 2

4 Apr 2002

5340-14-271-5433
Loop Clamp

142715433
262-12-50514-01: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-463-5654
Handwheel

144635654
666-141: RNCC: 3 | RNVC: 2
91621835: RNCC: 5 | RNVC: 2

17 Jun 1993

5340-14-299-9894
Strap End Clip

142999894
12203-025: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-444-3578
Access Cover

144443578
TV80/115: RNCC: 3 | RNVC: 2

9 Jan 1991

5340-14-339-4258
Angle Bracket

143394258
M3R221-373: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-481-8374
Mounting Bracket

144818374
312-12481-003: RNCC: 3 | RNVC: 2

1 Jun 1996

5340-14-344-8327
Compression Cup

143448327
GSM171-114F11: RNCC: 3 | RNVC: 2

9 Sep 1977

5340-14-473-8672
Webbing Strap

144738672
332V87-8053-14: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-032-0357
Control Rod

140320357
NO PRIMARY REF14-032-0357: RNCC: 3 | RNVC: 2
N21ABB12: RNCC: 5 | RNVC: 9

5 Jul 1980

5340-14-461-3120
Compression Cup

144613120
RU970-0042M133P22: RNCC: 3 | RNVC: 2

3 Mar 1993

5340-14-457-2485
Mounting Plate

144572485
402369A-SG10137-Z2CND17-12: RNCC: 3 | RNVC: 2

20 Aug 1992

5340-14-510-3288
Mounting Bracket

145103288
NO PRIMARY REF14-510-3288: RNCC: 3 | RNVC: 2
16335: RNCC: 5 | RNVC: 9
1560AA8020477: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-382-0041
Strap Fastener Loop

143820041
66631-0310-017: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-335-0374
Snap Hook

143350374
NO PRIMARY REF 14-335-0374: RNCC: 3 | RNVC: 2
1054340P00: RNCC: 5 | RNVC: 2
M0-5: RNCC: 5 | RNVC: 9

2 Jun 1976

5340-14-420-8518
Loop Clamp

144208518
NO PRIMARY REF14-420-8518: RNCC: 3 | RNVC: 2
9023: RNCC: 5 | RNVC: 9

16 Dec 1987

5340-14-488-5122
Blank Panel

144885122
DHS751-152-30: RNCC: 3 | RNVC: 2

14 May 1997

5340-14-204-7762
Loop Clamp

142047762
675-206-130-0: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-14-388-0146
Loop Clamp

143880146
NO PRIMARY REF14-388-0146: RNCC: 3 | RNVC: 2
RT7843-2: RNCC: 5 | RNVC: 9

12 Oct 1983

5340-14-379-7655
Retaining Strap

143797655
BAZ5160: RNCC: 3 | RNVC: 2

20 Oct 1982

5340-14-554-2828
Loop Clamp

145542828
9405.49149: RNCC: 3 | RNVC: 2

19 Jun 2007

5340-14-529-4587
Loop Clamp

145294587
RPL711100014B1: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-516-3632
Mounting Bracket

145163632
CV17109: RNCC: 3 | RNVC: 2

22 Sep 1999

5340-14-531-5995
Bridge Clamp

145315995
3827C009: RNCC: 3 | RNVC: 2
3827C009: RNCC: 3 | RNVC: 2

3 Sep 2002

5340-14-547-5609
Angle Bracket

145475609
RA1M702201115N1: RNCC: 3 | RNVC: 2

16 Oct 2005

5340-14-343-7102
Retaining Strap

143437102
158406: RNCC: 3 | RNVC: 2

13 Jul 1977

5340-14-270-8630
Retaining Strap

142708630
H90N2000: RNCC: 3 | RNVC: 2
530889: RNCC: 5 | RNVC: 2

4 May 1983

5340-14-529-9202
Mounting Bracket

145299202
RLSXS4A01: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-14-449-7797
Butt Hinge

144497797
704550CBI: RNCC: 3 | RNVC: 2

10 Sep 1991

5340-14-439-2535
Block Fairlead

144392535
3124673: RNCC: 3 | RNVC: 2
3124673: RNCC: 5 | RNVC: 2

25 Apr 1990

5340-14-509-6816
Cover Strip

145096816
RA1M705852911: RNCC: 3 | RNVC: 2

28 Oct 1998

5340-14-544-9485
Mounting Bracket

145449485
82070390000: RNCC: 3 | RNVC: 2

7 Mar 2005

5340-14-457-6168
Retaining Strap

144576168
PM1A888200600: RNCC: 3 | RNVC: 2
PM1A888200600: RNCC: 5 | RNVC: 2

10 Sep 1992

5340-14-417-8217
Mending Plate

144178217
20865984: RNCC: 3 | RNVC: 2

29 Jul 1987

5340-14-434-8925
Expansion Plug

144348925
0234-08: RNCC: 3 | RNVC: 2
7902102565: RNCC: 5 | RNVC: 2

9 Oct 1989

5340-14-543-5601
Mounting Bracket

145435601
212375: RNCC: 3 | RNVC: 2

23 Nov 2004

5340-14-534-4762
Mounting Bracket

145344762
10674789000: RNCC: 3 | RNVC: 2

26 Mar 2003

5340-14-331-8225
Rigid Caster

143318225
055W02-537018C: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-386-8272
Rim Lock

143868272
5823DC0TECADRE: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-242-8966
Retaining Clip

142428966
364718: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-509-6453
Mounting Plate

145096453
588A100104: RNCC: 3 | RNVC: 2

28 Oct 1998

5340-14-532-1295
Mounting Plate

145321295
5010527736: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-14-488-6693
Mounting Bracket

144886693
3BT01409AAAA: RNCC: 3 | RNVC: 2
3BT01409AAAA: RNCC: 5 | RNVC: 9

28 May 1997

5340-14-541-7881
Mounting Plate

145417881
D62102210004: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-504-7500
Mounting Plate

145047500
95970007: RNCC: 3 | RNVC: 2
5001824854: RNCC: 3 | RNVC: 2

3 Mar 1998

5340-14-449-8482
Mounting Bracket

144498482
382076A: RNCC: 3 | RNVC: 2

11 Sep 1991

5340-14-497-2661
Mounting Bracket

144972661
NTN5487: RNCC: 3 | RNVC: 2
F300 0T 022 9178: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-578-0544
Utility Resilient Mount

145780544
HH14-30-CM2: RNCC: 3 | RNVC: 2

24 Oct 2013

5340-14-446-4160
Support Hook

144464160
5000991849: RNCC: 3 | RNVC: 2
29-04464DR: RNCC: 3 | RNVC: 2
2403DR: RNCC: 5 | RNVC: 9

19 Mar 1991

5340-14-329-8911
Corner Brace

143298911
78678-030U: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-216-6876
Retaining Strap

142166876
NO PRIMARY REF14-216-6876: RNCC: 3 | RNVC: 2
87843: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-278-5226
Butt Hinge

142785226
50261-13: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-389-3687
Bridge Clamp

143893687
330A58-4209-00: RNCC: 3 | RNVC: 2

19 Dec 1983

5340-14-304-5688
Synchro Clamp

143045688
NO PRIMARY REF14-304-5688: RNCC: 3 | RNVC: 2
BNWT00X0400: RNCC: 5 | RNVC: 9
BNWT00X0400: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-308-6540
Rod End Clevis

143086540
595114-100-10CC: RNCC: 3 | RNVC: 2
595114-100-10CC: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-543-2222
Mounting Bracket

145432222
SE054-AP41: RNCC: 3 | RNVC: 2

31 Aug 2004

5340-14-394-1541
Butt Hinge

143941541
J36190-80X50LAIT0NCHR0ME: RNCC: 2 | RNVC: 2
40BL80X50LAIT0NCHR0ME: RNCC: 3 | RNVC: 2

23 Jun 1984

5340-14-521-5760
Access Cover

145215760
160-88903-02: RNCC: 3 | RNVC: 2

23 Aug 2000

5340-14-322-6124
Retaining Strap

143226124
3130S73-86-328: RNCC: 3 | RNVC: 2
85-800-0952: RNCC: 6 | RNVC: 9
85-800-4136: RNCC: 6 | RNVC: 9

1 Jan 1975

5340-14-031-8175
Rod End Clevis

140318175
R12608D14AEL: RNCC: 2 | RNVC: 2
T100-14X150N: RNCC: 3 | RNVC: 2
5993219: RNCC: 5 | RNVC: 2
302122114: RNCC: 5 | RNVC: 9

5 Jul 1980

5340-14-378-5091
Retaining Strap

143785091
1060670021: RNCC: 3 | RNVC: 2
106-39-23: RNCC: 5 | RNVC: 2
106-39-28: RNCC: 5 | RNVC: 2
1060670021: RNCC: 5 | RNVC: 2

11 Aug 1982

5340-14-217-3229
Loop Clamp

142173229
55212-280BGZ: RNCC: 3 | RNVC: 2
NSE55212-280BGZ: RNCC: 5 | RNVC: 2
NSE552-12-28: RNCC: 5 | RNVC: 2

1 Jan 1965

5340-14-470-8461
Angle Bracket

144708461
157E972-00: RNCC: 3 | RNVC: 2
157E972-00: RNCC: 5 | RNVC: 9

8 Jul 1994

5340-14-522-4721
Mounting Bracket

145224721
C0RF1-820-20: RNCC: 3 | RNVC: 2

31 Oct 2000

5340-14-448-3780
Lock-Release Lever

144483780
SLR201-230-431: RNCC: 3 | RNVC: 2

26 Jun 1991

5340-14-403-4712
Bail Handle

144034712
NO PRIMARY REF14-403-4712: RNCC: 3 | RNVC: 2
P3H010655-00: RNCC: 5 | RNVC: 9

21 Aug 1985

5340-14-031-1620
Retaining Strap

140311620
VDP4006: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-431-9300
Bumper

144319300
0894332C00: RNCC: 3 | RNVC: 2

16 May 1989

5340-14-457-6605
Webbing Strap

144576605
B3000-CAT2-LG6M: RNCC: 3 | RNVC: 2

10 Sep 1992

5340-14-548-4296
Loop Clamp

145484296
EN4114F08WR1: RNCC: 2 | RNVC: 2

16 Jan 2006

5340-14-357-8846
Runner

143578846
976687: RNCC: 3 | RNVC: 2
976687: RNCC: 5 | RNVC: 9

20 Jul 1979

5340-14-467-7904
Mounting Bracket

144677904
MB1460F00: RNCC: 3 | RNVC: 2

27 Jan 1994

5340-14-442-9424
Mounting Bracket

144429424
16759717: RNCC: 3 | RNVC: 2

7 Nov 1990

5340-14-520-9525
Angle Bracket

145209525
009971041P: RNCC: 3 | RNVC: 2

23 Jun 2000

5340-14-429-1223
Angle Bracket

144291223
050988A01TM79: RNCC: 3 | RNVC: 2
050988A: RNCC: 5 | RNVC: 2

11 Jan 1989

5340-14-317-9081
Bow Handle

143179081
P02LAIT0NCHR0ME: RNCC: 3 | RNVC: 2
AF0063: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-417-4449
Angle Bracket

144174449
188581: RNCC: 3 | RNVC: 2

8 Jul 1987

5340-14-466-1773
Mounting Bracket

144661773
165532: RNCC: 3 | RNVC: 2
89170076: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-446-2424
Timber Ring

144462424
099885V: RNCC: 3 | RNVC: 2

11 Mar 1991

5340-14-513-8911
Mounting Plate

145138911
2722DN50: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-14-553-8460
Mounting Bracket

145538460
82150909000: RNCC: 3 | RNVC: 2

23 May 2007

5340-14-514-8460
Mounting Plate

145148460
6136819: RNCC: 3 | RNVC: 2
22185D000104C: RNCC: 5 | RNVC: 2

22 Jun 1999

5340-14-524-0429
Blank Panel

145240429
GFCAA65: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-14-536-5661
Butt Hinge

145365661
0B1113: RNCC: 3 | RNVC: 2

2 Sep 2003

5340-14-464-3406
Angle Bracket

144643406
ST406M42P215: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-14-513-6971
Retaining Clip

145136971
6994-90: RNCC: 3 | RNVC: 2
9406994908: RNCC: 5 | RNVC: 2

7 Apr 1999

5340-14-373-6510
Runner

143736510
BAZ1878: RNCC: 3 | RNVC: 2

13 Nov 1981

5340-14-518-4580
Mounting Bracket

145184580
T537A2005151: RNCC: 3 | RNVC: 2
T537A2002151: RNCC: 5 | RNVC: 2

9 Feb 2000

5340-14-511-6152
Cover Strip

145116152
RA1M292580121: RNCC: 3 | RNVC: 2

6 Jan 1999

5340-14-406-9684
Butt Hinge

144069684
308: RNCC: 3 | RNVC: 2

22 Jan 1986

5340-14-456-1422
Loop Clamp

144561422
5000788069: RNCC: 3 | RNVC: 2

18 Jun 1992

5340-14-452-0541
Mounting Plate

144520541
SK20178: RNCC: 3 | RNVC: 2

18 Dec 1991

5340-14-513-2821
Bumper

145132821
R29232SMCDET10: RNCC: 3 | RNVC: 2

10 Mar 1999

5340-14-341-0872
Retaining Strap

143410872
16411586: RNCC: 3 | RNVC: 2
16411586: RNCC: 3 | RNVC: 9

16 Mar 1977

5340-14-510-7512
Mounting Plate

145107512
1053728K02: RNCC: 3 | RNVC: 2

10 Nov 1998

5340-14-396-1804
Angle Bracket

143961804
226569: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-496-9459
Mounting Bracket

144969459
63453: RNCC: 3 | RNVC: 2
F300 0T 022 3042: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-553-9646
Mounting Bracket

145539646
10504578001: RNCC: 3 | RNVC: 2

5 Jun 2007

5340-14-436-3225
Mounting Bracket

144363225
3168895: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-14-529-2979
Loop Clamp

145292979
24-82307: RNCC: 3 | RNVC: 2

20 Mar 2002

5340-14-531-8525
Strap Hinge

145318525
53 892 405 006: RNCC: 3 | RNVC: 2

20 Sep 2002

5340-14-485-9770
Angle Bracket

144859770
576164: RNCC: 3 | RNVC: 2

26 Feb 1997

5340-14-413-1651
Runner

144131651
180581010: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-14-413-9628
Retaining Strap

144139628
ST400S60P151: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-535-3838
Mounting Plate

145353838
5010232285: RNCC: 3 | RNVC: 2

22 May 2003

5340-14-540-0343
Mounting Plate

145400343
F1410796: RNCC: 3 | RNVC: 2

25 Feb 2004

5340-14-522-2934
Turnbuckle Body

145222934
RA1M172100001A1: RNCC: 3 | RNVC: 2

19 Oct 2000

5340-14-512-5817
Bumper

145125817
3BM02628AAAA: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-551-7426
Mounting Plate

145517426
RA1M702446051: RNCC: 3 | RNVC: 2

19 Oct 2006

5340-14-361-1681
Anchor Strap

143611681
650-42651-00: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-512-5497
Section Block Clamp

145125497
F706-86-02: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-343-9963
Rod End Clevis

143439963
NO PRIMARY REF14-343-9963: RNCC: 3 | RNVC: 2
336608: RNCC: 5 | RNVC: 9

13 Jul 1977

5340-14-341-4970
Quick Release Pin

143414970
A0139-168: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-457-8331
Rod End Connector

144578331
A67293-16: RNCC: 3 | RNVC: 2

24 Sep 1992

5340-14-387-9441
Flush Catch Claw

143879441
365A25-3069-22: RNCC: 3 | RNVC: 2

12 Oct 1983

5340-14-470-7175
Mounting Bracket

144707175
365A61-5110-0102: RNCC: 3 | RNVC: 2

29 Jun 1994

5340-14-573-5003
Utility Access Door

145735003
332P22-9015-20: RNCC: 3 | RNVC: 2
332P22901520: RNCC: 5 | RNVC: 2

17 Oct 2012

5340-14-486-0427
Detent Plunger

144860427
429755: RNCC: 3 | RNVC: 2
429755-001: RNCC: 5 | RNVC: 9

26 Feb 1997

5340-14-490-2912
Access Cover

144902912
J05085-02-0700P009: RNCC: 3 | RNVC: 2

24 Sep 1997

5340-14-302-3048
Access Cover

143023048
NO PRIMARY REF14-302-3048: RNCC: 3 | RNVC: 2
1612003: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-422-3992
Access Cover

144223992
A02603-02: RNCC: 3 | RNVC: 2

3 Mar 1988

5340-14-312-4979
Sliding Door Track

143124979
A10-23-540-01-01: RNCC: 3 | RNVC: 2
A10-23-540-01-01: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-514-0368
Mounting Plate

145140368
PM1A575194321: RNCC: 3 | RNVC: 2
PM1A575194321: RNCC: 5 | RNVC: 2

22 Apr 1999

5340-14-516-9454
Mounting Bracket

145169454
T212A5001106: RNCC: 3 | RNVC: 2

28 Oct 1999

5340-14-438-8243
Webbing Strap

144388243
TB2010904: RNCC: 3 | RNVC: 2

9 Apr 1990

5340-14-504-9964
Mounting Plate

145049964
5010119403: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-496-6822
Angle Bracket

144966822
46235091: RNCC: 3 | RNVC: 2
F300 0T 021 9006: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-540-4998
Mounting Bracket

145404998
61227510AA: RNCC: 3 | RNVC: 2

1 Apr 2004

5340-14-382-5638
Angle Bracket

143825638
16901371: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-378-8300
Angle Bracket

143788300
A21A221176391A2: RNCC: 3 | RNVC: 2

11 Aug 1982

5340-14-537-4981
Mounting Bracket

145374981
TD2330U: RNCC: 3 | RNVC: 2

3 Nov 2003

Load More Results