What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 97 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 97 of 446

5340-14-454-3967
Mounting Plate

144543967
31-26612B: RNCC: 3 | RNVC: 2
31-26612B: RNCC: 5 | RNVC: 9

1 Apr 1992

5340-14-341-8356
Access Cover

143418356
M3B701-57-02: RNCC: 3 | RNVC: 2

14 Apr 1977

5340-14-425-3302
Butt Hinge

144253302
72-1-3638: RNCC: 3 | RNVC: 2
721-3638: RNCC: 5 | RNVC: 2

30 Jun 1988

5340-14-434-7054
Protection Bellows

144347054
T8,5-5/9REP5-19: RNCC: 3 | RNVC: 2

2 Oct 1989

5340-14-423-0811
Rod End Clevis

144230811
160G202403-02: RNCC: 3 | RNVC: 2

31 Mar 1988

5340-14-390-0823
Control Rod

143900823
NO PRIMARY REF14-390-0823: RNCC: 3 | RNVC: 2
4-21414-0: RNCC: 5 | RNVC: 9

26 Jan 1984

5340-14-546-3805
Mounting Bracket

145463805
268E327-00: RNCC: 3 | RNVC: 2

28 Jun 2005

5340-14-484-2567
Mounting Bracket

144842567
502-712-191-0: RNCC: 3 | RNVC: 2

31 Oct 1996

5340-14-421-7911
Threaded Rod End

144217911
4406-311-10: RNCC: 3 | RNVC: 2

27 Jan 1988

5340-14-512-5528
Section Block Clamp

145125528
F708-51-02: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-520-2527
Buckle

145202527
13311-112: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-417-1765
Rod End Connector

144171765
A64698-1000: RNCC: 3 | RNVC: 2

1 Jul 1987

5340-14-439-2439
Loop Clamp

144392439
332A52-1231-00: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-568-8220
Utility Resilient Mount

145688220
BFN45-170: RNCC: 3 | RNVC: 2

7 Jul 2011

5340-14-466-6975
Angle Bracket

144666975
820413-37: RNCC: 3 | RNVC: 2

24 Nov 1993

5340-14-471-6027
Roller Holder

144716027
312-05791-011: RNCC: 3 | RNVC: 2

7 Sep 1994

5340-14-371-8290
Angle Bracket

143718290
NO PRIMARY REF14-371-8290: RNCC: 3 | RNVC: 2
RF72-1003-2: RNCC: 5 | RNVC: 2

5 Aug 1981

5340-14-423-2395
Mounting Plate

144232395
488402M354-04P10: RNCC: 3 | RNVC: 2

14 Apr 1988

5340-14-408-5256
Mounting Plate

144085256
NO PRIMARY REF14-408-5256: RNCC: 3 | RNVC: 2
D10-46953: RNCC: 5 | RNVC: 9

2 Apr 1986

5340-14-398-2156
Angle Bracket

143982156
304-708-101-0: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-467-5859
Butt Hinge

144675859
312-09539-001: RNCC: 3 | RNVC: 2

19 Jan 1994

5340-14-358-2654
Access Cover

143582654
103520702: RNCC: 3 | RNVC: 2
1-11: RNCC: 5 | RNVC: 2
R100-01-011-03-3: RNCC: 5 | RNVC: 2
103520702: RNCC: 5 | RNVC: 2

13 Aug 1979

5340-14-408-6428
Rod End Clevis

144086428
160G202093: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-14-509-6810
Cover Strip

145096810
RA1M705232251N1: RNCC: 3 | RNVC: 2

28 Oct 1998

5340-14-519-5805
Plug Button

145195805
440.072090: RNCC: 3 | RNVC: 2

22 Mar 2000

5340-14-534-2882
Access Cover

145342882
10653097: RNCC: 3 | RNVC: 2

19 Mar 2003

5340-14-525-7517
Mounting Plate

145257517
04205395: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-502-7011
Mounting Bracket

145027011
1076708: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-480-2284
Retaining Bail

144802284
1070251A00: RNCC: 3 | RNVC: 2
F300 0T 020 8000: RNCC: 6 | RNVC: 9

28 Feb 1996

5340-14-214-7259
Butt Hinge

142147259
0000652925: RNCC: 3 | RNVC: 2
652925: RNCC: 5 | RNVC: 9
0000652925: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-437-5598
Bridge Clamp

144375598
20322297: RNCC: 3 | RNVC: 2
20322297: RNCC: 5 | RNVC: 9

7 Feb 1990

5340-14-377-5390
Angle Bracket

143775390
A21A221176321: RNCC: 3 | RNVC: 2

17 May 1982

5340-14-531-6611
Rigid Caster

145316611
1121966W00: RNCC: 3 | RNVC: 2

11 Sep 2002

5340-14-429-5194
Mounting Bracket

144295194
755-2146: RNCC: 3 | RNVC: 2

27 Jan 1989

5340-14-495-3076
Webbing Strap

144953076
117E240-00: RNCC: 3 | RNVC: 2
117E240-00: RNCC: 5 | RNVC: 9
F300 0T 018 9985: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-445-3161
Mounting Plate

144453161
NO PRIMARY REF14-445-3161: RNCC: 3 | RNVC: 2
3160092: RNCC: 5 | RNVC: 9
3160092: RNCC: 5 | RNVC: 9
F300 0T 003 0279: RNCC: 6 | RNVC: 9

11 Feb 1991

5340-14-402-1477
Angle Bracket

144021477
437-01-013: RNCC: 3 | RNVC: 2

26 Jun 1985

5340-14-451-5827
Runner

144515827
A03037-20-2010P003: RNCC: 3 | RNVC: 2

21 Nov 1991

5340-14-358-6767
Loop Clamp

143586767
202C231-10: RNCC: 3 | RNVC: 2
202C231-10: RNCC: 3 | RNVC: 9
202C231-10: RNCC: 5 | RNVC: 2

7 Sep 1979

5340-14-452-5278
Threaded Rod End

144525278
F210-11802: RNCC: 3 | RNVC: 2

8 Jan 1992

5340-14-440-6728
Lock Bolt

144406728
332A58-2015-21: RNCC: 3 | RNVC: 2

18 Jul 1990

5340-14-217-9120
Cover Strip

142179120
3160S25-23-033: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-224-0191
Handwheel

142240191
GSM137-001F7DET5SANSB0ULEAS10G: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-389-1130
Angle Bracket

143891130
366A25-0032-2801: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-314-4237
Threaded Rod End

143144237
P06279-36: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-218-0684
Loop Clamp

142180684
NO PRIMARY REF14-218-0684: RNCC: 3 | RNVC: 2
60907: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-549-9072
Metal Grille

145499072
2092259-001: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-245-1467
Lock Bolt

142451467
321A25-0059-01: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-379-9307
Rim Lock Set

143799307
NO PRIMARY REF14-379-9307: RNCC: 3 | RNVC: 2
1700-015-1729R0: RNCC: 5 | RNVC: 9

20 Oct 1982

5340-14-541-5125
Access Cover

145415125
1091326-001: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-426-1173
Webbing Strap

144261173
A64-201-33: RNCC: 3 | RNVC: 2
16744633: RNCC: 5 | RNVC: 2

4 Aug 1988

5340-14-533-4065
Loop Clamp

145334065
NO PRIMARY REF14-533-4065: RNCC: 3 | RNVC: 2
0181741: RNCC: 5 | RNVC: 9

4 Feb 2003

5340-14-541-8263
Mounting Plate

145418263
88179-1133: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-435-8296
Mounting Plate

144358296
332A34-1073-20: RNCC: 3 | RNVC: 2

22 Nov 1989

5340-14-503-1941
Arched Cushion

145031941
78646A050: RNCC: 3 | RNVC: 2

7 Jan 1998

5340-14-451-2504
Pipe Hanger

144512504
PM1A726244320: RNCC: 3 | RNVC: 2
PM1A726244320: RNCC: 5 | RNVC: 2

6 Nov 1991

5340-14-512-0236
Runner

145120236
RL00PE010002: RNCC: 1 | RNVC: 2
RL00PE010002: RNCC: 3 | RNVC: 2
RL00PE010002: RNCC: 5 | RNVC: 9
RL00PE010002: RNCC: 5 | RNVC: 9

3 Feb 1999

5340-14-404-7442
Bow Handle

144047442
61405: RNCC: 3 | RNVC: 2

20 Nov 1985

5340-14-451-5164
Mounting Bracket

144515164
532387: RNCC: 3 | RNVC: 2

21 Nov 1991

5340-14-332-8111
Runner

143328111
573895925: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-427-5181
Utility Access Door

144275181
NO PRIMARY REF14-427-5181: RNCC: 3 | RNVC: 2
22031: RNCC: 5 | RNVC: 9

20 Oct 1988

5340-14-482-9184
Pipe Hanger

144829184
78731-020-050: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-475-6277
Detent Plunger

144756277
856DRH1006000: RNCC: 3 | RNVC: 2
856DRH100-60-00: RNCC: 5 | RNVC: 9
856DRH1006000: RNCC: 5 | RNVC: 9

21 Apr 1995

5340-14-457-4833
Loop Clamp

144574833
MAT169-0029F5: RNCC: 3 | RNVC: 2

8 Sep 1992

5340-14-451-7848
Protection Bellows

144517848
202959-07: RNCC: 3 | RNVC: 2
202959-07: RNCC: 5 | RNVC: 9

4 Dec 1991

5340-14-318-8710
Pad Eye

143188710
S00271-33: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-445-2356
Loop Clamp

144452356
22900402: RNCC: 3 | RNVC: 2
182UTB040: RNCC: 5 | RNVC: 2

6 Feb 1991

5340-14-475-5812
Mounting Plate

144755812
802290010126: RNCC: 3 | RNVC: 2
802290010126: RNCC: 5 | RNVC: 9
SDM802290010126: RNCC: 5 | RNVC: 9

19 Apr 1995

5340-14-482-0916
Runner

144820916
22097995: RNCC: 3 | RNVC: 2
22097995: RNCC: 5 | RNVC: 9

20 Jun 1996

5340-14-502-7261
Mounting Bracket

145027261
1196738: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-467-1188
Retaining Strap

144671188
164178: RNCC: 3 | RNVC: 2
89170007: RNCC: 5 | RNVC: 2

16 Dec 1993

5340-14-480-7444
Mounting Bracket

144807444
34 62 20: RNCC: 3 | RNVC: 2

28 Mar 1996

5340-14-382-3590
Luggage Handle

143823590
3006-82: RNCC: 3 | RNVC: 2
K4-202: RNCC: 5 | RNVC: 2

17 Feb 1983

5340-14-549-8337
Mounting Bracket

145498337
169E230-03: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-389-3220
Loop Clamp

143893220
NO PRIMARY REF14-389-3220: RNCC: 3 | RNVC: 2
S900-36: RNCC: 5 | RNVC: 9

29 Nov 1983

5340-14-389-4921
Mounting Plate

143894921
365A63-1525-21: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-553-0366
Angle Bracket

145530366
0039904: RNCC: 3 | RNVC: 2

23 Feb 2007

5340-14-553-4666
Pipe Hanger

145534666
DA1N203214001: RNCC: 3 | RNVC: 2

5 Apr 2007

5340-14-335-6454
Rod End Clevis

143356454
A0049-016F10: RNCC: 3 | RNVC: 2

30 Jun 1976

5340-14-366-8094
Angle Bracket

143668094
970019: RNCC: 3 | RNVC: 2
970019: RNCC: 5 | RNVC: 9

20 Nov 1980

5340-14-392-4954
Control Rod

143924954
14-30-23: RNCC: 3 | RNVC: 9

21 Mar 1984

5340-14-455-3087
Access Cover

144553087
IF164-400: RNCC: 3 | RNVC: 9

21 May 1992

5340-14-453-7528
Access Cover

144537528
2085-05-005: RNCC: 3 | RNVC: 2
89411690: RNCC: 5 | RNVC: 9

5 Mar 1992

5340-14-394-9853
Runner

143949853
7915-2A: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-524-6350
Retaining Clip

145246350
054185000: RNCC: 3 | RNVC: 9
054185: RNCC: 5 | RNVC: 9
054185-850-901: RNCC: 5 | RNVC: 9
054185850901: RNCC: 5 | RNVC: 9

29 Mar 2001

5340-14-456-3215
Loop Clamp

144563215
E1M-3705-01: RNCC: 3 | RNVC: 2
E1M3705-01: RNCC: 5 | RNVC: 2
MAT169-0024F5ROUGE: RNCC: 5 | RNVC: 2
E1M3705-01: RNCC: 5 | RNVC: 2

25 Jun 1992

5340-14-320-4836
Butt Hinge

143204836
58-1-3336: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-361-4740
Angle Bracket

143614740
NO PRIMARY REF14-361-4740: RNCC: 3 | RNVC: 2
320683: RNCC: 5 | RNVC: 9

24 Jan 1980

5340-14-553-3323
Loop Clamp

145533323
44037727: RNCC: 3 | RNVC: 2

26 Mar 2007

5340-14-303-8363
Control Rod

143038363
554-413-064FF8DET20BIS: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-319-4022
Retaining Strap

143194022
3130S35-60-038: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-532-6106
Mounting Plate

145326106
79005-136: RNCC: 3 | RNVC: 2

20 Nov 2002

5340-14-554-3747
Clamping Catch

145543747
0042024: RNCC: 3 | RNVC: 2
V951L01-1Y2AF: RNCC: 5 | RNVC: 9

26 Jun 2007

5340-14-217-3166
Loop Clamp

142173166
3160S21-10-010: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-311-6646
Pipe Hanger

143116646
3160S78-04-641: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-267-0441
Synchro Clamp

142670441
NO PRIMARY REF14-267-0441: RNCC: 3 | RNVC: 2
442452: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-532-3964
Angle Bracket

145323964
78703-20-055C: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-14-344-0068
Loop Clamp

143440068
70167144: RNCC: 3 | RNVC: 2
167144: RNCC: 5 | RNVC: 9
70167144: RNCC: 5 | RNVC: 9
85-211-4160: RNCC: 6 | RNVC: 9

13 Jul 1977

5340-14-483-0888
Lock Key

144830888
1004-04: RNCC: 3 | RNVC: 2

8 Aug 1996

5340-14-517-6944
Pipe Hanger

145176944
FC1C706-95: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-490-3068
Mounting Plate

144903068
J05085-01-0220P006: RNCC: 3 | RNVC: 2

24 Sep 1997

5340-14-384-3189
Loop Clamp

143843189
92831271: RNCC: 3 | RNVC: 2
9-28GE27: RNCC: 5 | RNVC: 2

4 May 1983

5340-14-533-6792
Angle Bracket

145336792
169E502-00: RNCC: 3 | RNVC: 2

18 Feb 2003

5340-14-531-9998
Runner

145319998
MAT291-0555F1: RNCC: 3 | RNVC: 2

7 Oct 2002

5340-14-222-3653
Bumper

142223653
NO PRIMARY REF14-222-3653: RNCC: 3 | RNVC: 2
88534: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-425-0132
Loop Holder

144250132
JVCIT02-02-01-00: RNCC: 3 | RNVC: 2
89407126: RNCC: 5 | RNVC: 2

16 Jun 1988

5340-14-501-9394
Mounting Bracket

145019394
332A24-0546-01: RNCC: 3 | RNVC: 2

19 Nov 1997

5340-14-541-9890
Butt Hinge

145419890
20028-789: RNCC: 3 | RNVC: 2
502118X04003A: RNCC: 3 | RNVC: 9

2 Jul 2004

5340-14-351-5784
Bow Handle

143515784
10501-002: RNCC: 3 | RNVC: 2

12 Sep 1978

5340-14-553-1573
Mounting Bracket

145531573
252641038-00: RNCC: 3 | RNVC: 2

7 Mar 2007

5340-14-479-3310
Mounting Bracket

144793310
050A66-617730C: RNCC: 3 | RNVC: 2
0617730C00: RNCC: 5 | RNVC: 2

10 Jan 1996

5340-14-413-7026
Angle Bracket

144137026
412705020102: RNCC: 3 | RNVC: 2

15 Jan 1987

5340-14-316-2695
Angle Bracket

143162695
0257858490: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-405-5546
Butt Hinge

144055546
0762135K00: RNCC: 3 | RNVC: 2

2 Dec 1985

5340-14-381-4649
Angle Bracket

143814649
2206-830C501: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-031-6827
Rod End Clevis

140316827
A11A722214232A1: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-405-2532
Butt Hinge

144052532
1230407: RNCC: 3 | RNVC: 2

27 Nov 1985

5340-14-290-7782
Snap Hook

142907782
04892/021/206: RNCC: 3 | RNVC: 2
Z00.N7691364892: RNCC: 5 | RNVC: 2
4892-0-16: RNCC: 5 | RNVC: 2
4892-16: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-010-0241
Cover Strip

140100241
3130S25-10-010-1: RNCC: 3 | RNVC: 2

1 Jan 1961

5340-14-549-5025
Runner

145495025
MC201-215274-30: RNCC: 3 | RNVC: 2

11 Apr 2006

5340-14-526-8095
Access Cover

145268095
5000293997: RNCC: 3 | RNVC: 2

7 Sep 2001

5340-14-535-2387
Bumper

145352387
6501PSE100031: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-213-6145
Synchro Clamp

142136145
S2158-1DG: RNCC: 3 | RNVC: 2
S2158-1: RNCC: 5 | RNVC: 2

1 Jan 1964

5340-14-517-1999
Mounting Bracket

145171999
POT02PD000015: RNCC: 3 | RNVC: 2

17 Nov 1999

5340-14-245-9272
Rod End Connector

142459272
1050-79-010-03-0: RNCC: 3 | RNVC: 2
79-010-03-0: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-14-476-9193
Plug Button

144769193
501-990-088-0: RNCC: 3 | RNVC: 2

12 Jul 1995

5340-14-314-3889
Access Cover

143143889
998-10-004-1: RNCC: 3 | RNVC: 2
998-10-004-1: RNCC: 5 | RNVC: 2
998-10-004-1: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-526-8658
Strap Fastener Loop

145268658
21224306-00: RNCC: 3 | RNVC: 2
21224306-1: RNCC: 5 | RNVC: 2

12 Sep 2001

5340-14-473-3654
Lock Bolt

144733654
360A25-1184-01: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-14-314-2425
Mending Plate

143142425
9742-052: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-249-3878
Rod End Connector

142493878
321A26-0450-20: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-244-8161
Retaining Bail

142448161
56393: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-302-9011
Retaining Strap

143029011
773-418-217FF4DET1: RNCC: 3 | RNVC: 2
773-418-217FF4DET1: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-462-8604
Mounting Bracket

144628604
A49848: RNCC: 3 | RNVC: 2
85-694-9286: RNCC: 6 | RNVC: 9

5 May 1993

5340-14-564-4167
Utility Resilient Mount

145644167
A210609900064: RNCC: 3 | RNVC: 2
35-240-25 30: RNCC: 5 | RNVC: 2

28 Apr 2010

5340-14-231-6956
Rod End Clevis

142316956
NO PRIMARY REF14-231-6956: RNCC: 3 | RNVC: 2
84433: RNCC: 5 | RNVC: 9
84433: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-280-1235
Bridge Clamp

142801235
3511 960 27411: RNCC: 3 | RNVC: 2
3511-960-27411: RNCC: 5 | RNVC: 2
MQ02741: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-315-6044
Retaining Clip

143156044
1503-00: RNCC: 3 | RNVC: 2
1503: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-282-4946
Retaining Strap

142824946
M208-25039: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-262-7191
Fusible Plug

142627191
NO PRIMARY REF14-262-7191: RNCC: 3 | RNVC: 2
119L262: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-503-0156
Butt Hinge

145030156
332A58-1657-20: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-525-7751
Loop Clamp

145257751
C103426: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-461-2389
Mounting Plate

144612389
160R742523: RNCC: 3 | RNVC: 2

3 Mar 1993

5340-14-485-5101
Mounting Bracket

144855101
20-01-172: RNCC: 3 | RNVC: 2
20-01-172: RNCC: 3 | RNVC: 9

29 Jan 1997

5340-14-389-6368
Bumper

143896368
98418-1008: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-504-8294
Mounting Plate

145048294
0315770910: RNCC: 3 | RNVC: 2

4 Mar 1998

5340-14-497-1664
Mounting Plate

144971664
264025: RNCC: 3 | RNVC: 2
F300 0T 022 7398: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-260-5946
Corner Brace

142605946
429-09702-979: RNCC: 3 | RNVC: 2
429-09702-979: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-318-3134
Mending Plate

143183134
26-810040-10: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-501-4321
Butt Hinge

145014321
1036-U9: RNCC: 3 | RNVC: 2
SYB3366: RNCC: 5 | RNVC: 2

29 Oct 1997

5340-14-449-5340
Bumper

144495340
D25814: RNCC: 3 | RNVC: 2

26 Aug 1991

5340-14-418-0234
Angle Bracket

144180234
6223-12: RNCC: 3 | RNVC: 2
9251437680: RNCC: 5 | RNVC: 2

6 Aug 1987

5340-14-383-5108
Mounting Plate

143835108
20068361: RNCC: 3 | RNVC: 2
20068361: RNCC: 5 | RNVC: 9

11 Apr 1983

5340-14-418-0446
Retaining Strap

144180446
103612401: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-14-366-8303
Retaining Strap

143668303
15174596: RNCC: 3 | RNVC: 2
15174596: RNCC: 5 | RNVC: 2
15174596: RNCC: 5 | RNVC: 9

20 Nov 1980

5340-14-434-1781
Mounting Bracket

144341781
392787: RNCC: 3 | RNVC: 2
392787: RNCC: 5 | RNVC: 9

11 Sep 1989

5340-14-390-4537
Butt Hinge

143904537
39D1CHR0MEAXEIN0X: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-14-539-5588
Bow Handle

145395588
SZ09.725.800: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-14-469-3506
Mounting Bracket

144693506
D55689: RNCC: 3 | RNVC: 2

20 Apr 1994

5340-14-463-5469
Plate Spacer

144635469
123031107: RNCC: 3 | RNVC: 9

17 Jun 1993

5340-14-541-9231
Mounting Bracket

145419231
56294880: RNCC: 3 | RNVC: 2

2 Jul 2004

5340-14-459-1978
Mounting Bracket

144591978
101A107498A: RNCC: 3 | RNVC: 2
A107498A: RNCC: 5 | RNVC: 2
101A107498A: RNCC: 5 | RNVC: 9

19 Nov 1992

5340-14-313-8923
Loop Clamp

143138923
51210602012: RNCC: 3 | RNVC: 2
20F12: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-515-7255
Mounting Bracket

145157255
RA1M216900120A2: RNCC: 3 | RNVC: 2

28 Jul 1999

5340-14-467-6222
Mounting Plate

144676222
440812: RNCC: 3 | RNVC: 2
440812: RNCC: 5 | RNVC: 9

19 Jan 1994

5340-14-349-3444
Angle Bracket

143493444
482936: RNCC: 3 | RNVC: 2

22 May 1978

5340-14-517-8880
Loop Clamp

145178880
CO50GTS: RNCC: 3 | RNVC: 2

17 Jan 2000

5340-14-526-4569
Angle Bracket

145264569
RA1M705356211: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-527-0468
Mounting Bracket

145270468
303-263-301-0: RNCC: 3 | RNVC: 2

26 Sep 2001

5340-14-287-2775
Mending Plate

142872775
341A34-1116-20: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-333-6912
Swivel Caster

143336912
4353-10-07: RNCC: 3 | RNVC: 2

23 Apr 1976

5340-14-503-2777
Vent Plug

145032777
332A55-1096-00: RNCC: 3 | RNVC: 2

7 Jan 1998

5340-14-515-9687
Mounting Plate

145159687
312-00060-021: RNCC: 3 | RNVC: 2

1 Sep 1999

5340-14-475-0589
Retaining Strap

144750589
J01037-03-2260P006: RNCC: 3 | RNVC: 2

16 Mar 1995

5340-14-365-3213
Retaining Strap

143653213
650-403-071-0: RNCC: 3 | RNVC: 2

19 Sep 1980

5340-14-550-0351
Retaining Strap

145500351
EA6M701-28-942: RNCC: 3 | RNVC: 2

30 May 2006

5340-14-471-6026
Roller Holder

144716026
312-05791-005: RNCC: 3 | RNVC: 2

7 Sep 1994

5340-14-335-0502
Handwheel

143350502
MAT137-003F4AVIORB: RNCC: 3 | RNVC: 2
GSM137-07F16AVI0RB: RNCC: 5 | RNVC: 2
GSM137-007F16AVI0RB: RNCC: 5 | RNVC: 2

2 Jun 1976

5340-14-342-1573
Pipe Hanger

143421573
EA1M524-11: RNCC: 3 | RNVC: 2

14 Apr 1977

5340-14-296-1839
Angle Bracket

142961839
121E63-130-01-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-484-8228
Mounting Bracket

144848228
332P69-3506-02: RNCC: 3 | RNVC: 2

5 Dec 1996

5340-14-447-6269
Angle Bracket

144476269
663-45376-00: RNCC: 3 | RNVC: 2

29 May 1991

5340-14-468-9313
Screw Hook

144689313
6151-3X25: RNCC: 3 | RNVC: 2

29 Mar 1994

5340-14-302-1200
Mending Plate

143021200
A10-74-105-40-0: RNCC: 3 | RNVC: 2
A10-74-105-40-0: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-214-3324
Retaining Strap

142143324
NO PRIMARY REF14-214-3324: RNCC: 3 | RNVC: 2
6008: RNCC: 5 | RNVC: 9
6008CD: RNCC: 5 | RNVC: 9
99001414: RNCC: 5 | RNVC: 9
694002-1: RNCC: 5 | RNVC: 9
99001414: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-332-0890
Retaining Strap

143320890
8500-2402: RNCC: 3 | RNVC: 2
8500-410: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-417-6673
Loop Clamp

144176673
GM90203-32: RNCC: 3 | RNVC: 2
GM90203-32: RNCC: 5 | RNVC: 2

22 Jul 1987

5340-14-536-3296
Mounting Bracket

145363296
D05/4103: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-14-549-1821
Mounting Bracket

145491821
21428336-00: RNCC: 3 | RNVC: 2
21428336-0: RNCC: 5 | RNVC: 2

7 Mar 2006

5340-14-485-6961
Handwheel

144856961
663-100: RNCC: 3 | RNVC: 2
91566212: RNCC: 5 | RNVC: 2
663100: RNCC: 5 | RNVC: 2
91566212: RNCC: 5 | RNVC: 2

6 Feb 1997

5340-14-295-0761
Synchro Clamp

142950761
S2299-1DG: RNCC: 3 | RNVC: 2
S2299-1: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-472-5849
Clamp Bolt Assembly

144725849
S3SD18128-4: RNCC: 3 | RNVC: 2
S3SD18128-04: RNCC: 5 | RNVC: 2
S3SD18128-4: RNCC: 5 | RNVC: 2

3 Nov 1994

5340-14-299-3315
Pipe Hanger

142993315
MY20516-009: RNCC: 3 | RNVC: 2
MY20-516-009: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-517-0458
Mounting Plate

145170458
399-002-271-0: RNCC: 3 | RNVC: 2

28 Oct 1999

5340-14-322-7116
Retaining Strap

143227116
906-0-21-35: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-511-2527
Flush Catch Claw

145112527
203997: RNCC: 3 | RNVC: 2
203997-001: RNCC: 5 | RNVC: 9

9 Dec 1998

5340-14-308-3612
Loop Clamp

143083612
E4M701-55-860: RNCC: 3 | RNVC: 2
240-020-25356: RNCC: 3 | RNVC: 2
25356: RNCC: 5 | RNVC: 2
HB118-4-2S03: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-370-1463
Rod End Connector

143701463
MY20281-34873: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-412-5081
Loop Clamp

144125081
1630620008: RNCC: 3 | RNVC: 2
16306200: RNCC: 5 | RNVC: 2

15 Oct 1986

5340-14-330-6274
Bow Handle

143306274
15157871: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-479-0955
Mounting Bracket

144790955
625439: RNCC: 3 | RNVC: 2

13 Dec 1995

5340-14-402-0834
Plug Button

144020834
400600: RNCC: 3 | RNVC: 2
BGE400600: RNCC: 5 | RNVC: 2

26 Jun 1985

5340-14-392-7057
Vent Plug

143927057
208-00570-01: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-522-3759
Mounting Plate

145223759
10478022: RNCC: 3 | RNVC: 2

25 Oct 2000

5340-14-551-9793
Mounting Bracket

145519793
82171270000: RNCC: 3 | RNVC: 2

15 Nov 2006

5340-14-446-1406
Access Cover

144461406
39959430: RNCC: 3 | RNVC: 2
39959430: RNCC: 5 | RNVC: 9

6 Mar 1991

5340-14-394-6374
Mending Plate

143946374
79092902: RNCC: 3 | RNVC: 2
79092902: RNCC: 5 | RNVC: 9

28 Aug 1984

5340-14-414-0066
Anchor Strap

144140066
7700634031: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-466-1716
Access Cover

144661716
161420: RNCC: 3 | RNVC: 2
89170985: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-394-9449
Bow Handle

143949449
20320769: RNCC: 3 | RNVC: 2
20320769: RNCC: 5 | RNVC: 9

2 Oct 1984

5340-14-447-9980
Mounting Bracket

144479980
A37602W: RNCC: 3 | RNVC: 2

12 Jun 1991

5340-14-230-7303
Handwheel

142307303
GSM137-001F12-9C1: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-359-6048
Mending Plate

143596048
140025935: RNCC: 3 | RNVC: 2
140025935: RNCC: 5 | RNVC: 2

15 Oct 1979

5340-14-549-6257
Mounting Plate

145496257
JCB 10 135-853: RNCC: 3 | RNVC: 2

24 Apr 2006

5340-14-516-5368
Mounting Bracket

145165368
NO PRIMARY REF14-516-5368: RNCC: 3 | RNVC: 2
F1291706: RNCC: 5 | RNVC: 9

1 Oct 1999

5340-14-327-1580
Door Hook

143271580
J36-130-90LAIT0N: RNCC: 2 | RNVC: 2
C2-90LAIT0N: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-541-9345
Mounting Plate

145419345
418-11540-000: RNCC: 3 | RNVC: 2

2 Jul 2004

5340-14-520-5107
Arched Cushion

145205107
MAT169-0012F22DE37: RNCC: 3 | RNVC: 2

19 May 2000

5340-14-216-9331
Rod End Clevis

142169331
D1553-3703: RNCC: 3 | RNVC: 2
Q3703: RNCC: 5 | RNVC: 2
D1553-3703: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-459-6647
Arched Cushion

144596647
MAT169-0012F19DE8: RNCC: 3 | RNVC: 2

10 Dec 1992

5340-14-427-5741
Loop Clamp

144275741
320-136-601-0: RNCC: 3 | RNVC: 2

20 Oct 1988

5340-14-501-8913
Metal Grille

145018913
38659048: RNCC: 3 | RNVC: 2
38659048: RNCC: 5 | RNVC: 9

19 Nov 1997

5340-14-394-9356
Access Cover

143949356
20257086: RNCC: 3 | RNVC: 2
20257086: RNCC: 5 | RNVC: 9

2 Oct 1984

5340-14-281-2142
Retaining Strap

142812142
202318: RNCC: 3 | RNVC: 2
535335: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-501-6485
Locking Stay

145016485
1741530: RNCC: 3 | RNVC: 2
91353884: RNCC: 3 | RNVC: 2

5 Nov 1997

5340-14-532-4272
Angle Bracket

145324272
PM1A654050103: RNCC: 3 | RNVC: 2
PM1A654050103: RNCC: 5 | RNVC: 2

30 Oct 2002

5340-14-536-8708
Mounting Bracket

145368708
030437: RNCC: 3 | RNVC: 2
30437: RNCC: 5 | RNVC: 2

17 Sep 2003

5340-14-286-4237
Snap Hook

142864237
22106-027: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-481-7566
Mounting Bracket

144817566
7252-45: RNCC: 3 | RNVC: 2
9407252450: RNCC: 5 | RNVC: 2

30 May 1996

5340-14-524-4311
Mounting Plate

145244311
EA5M701-12-940: RNCC: 3 | RNVC: 2

19 Mar 2001

5340-14-549-9042
Mounting Bracket

145499042
2092187-001: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-271-8974
Mounting Bracket

142718974
3160S35-30-517: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-457-2618
Mounting Plate

144572618
402207A-SG10137-Z2CND17-12: RNCC: 3 | RNVC: 2

20 Aug 1992

5340-14-362-5131
Retaining Strap

143625131
NO PRIMARY REF14-362-5131: RNCC: 3 | RNVC: 2
F2031828: RNCC: 5 | RNVC: 9

19 Mar 1980

5340-14-469-9996
Mounting Plate

144699996
4656442A: RNCC: 3 | RNVC: 2
4656442A: RNCC: 3 | RNVC: 9
SK-260A: RNCC: 6 | RNVC: 9

25 May 1994

5340-14-276-2519
Butt Hinge

142762519
160-10527-12: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-522-1070
Mounting Plate

145221070
40VGA0-09: RNCC: 3 | RNVC: 2

4 Oct 2000

5340-14-412-8667
Webbing Strap

144128667
ST406M75A21-13: RNCC: 3 | RNVC: 2

5 Nov 1986

5340-14-364-4425
Angle Bracket

143644425
053M53-604871G: RNCC: 3 | RNVC: 2
0604871G00: RNCC: 5 | RNVC: 2

2 Sep 1980

5340-14-410-3062
Protection Bellows

144103062
330A52-0516-20: RNCC: 3 | RNVC: 2

18 Jun 1986

5340-14-239-4375
Cover Strip

142394375
321A25-0002-34: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-529-9871
Angle Bracket

145299871
160-61319-186: RNCC: 3 | RNVC: 2

24 Apr 2002

5340-14-422-7565
Rim Lock Set

144227565
NO PRIMARY REF14-422-7565: RNCC: 3 | RNVC: 2
91357991: RNCC: 5 | RNVC: 2
91564554: RNCC: 5 | RNVC: 2
ELP1: RNCC: 5 | RNVC: 2
ELP1: RNCC: 5 | RNVC: 9

17 Mar 1988

5340-14-352-0225
Retaining Band

143520225
341A55-1144-0551: RNCC: 3 | RNVC: 2

16 Oct 1978

5340-14-414-2293
Rod End Clevis

144142293
TMY20-09105-2200-1: RNCC: 3 | RNVC: 2

27 Jan 1987

5340-14-452-0516
Mounting Bracket

144520516
H46033: RNCC: 3 | RNVC: 2
85-693-5475: RNCC: 6 | RNVC: 9

18 Dec 1991

5340-14-292-4381
Elbow Catch

142924381
341A24-1026-20: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-373-0055
Rigid Caster

143730055
TF4BA125-23R: RNCC: 3 | RNVC: 2
85-691-4945: RNCC: 6 | RNVC: 9

21 Sep 1981

5340-14-404-1315
Expansion Shield

144041315
NO PRIMARY REF14-404-1315: RNCC: 3 | RNVC: 2
6E-SV: RNCC: 5 | RNVC: 9
80100: RNCC: 5 | RNVC: 9

11 Sep 1985

5340-14-551-6223
Mounting Bracket

145516223
252214063-00: RNCC: 3 | RNVC: 2

10 Oct 2006

5340-14-465-1394
Mounting Plate

144651394
365A21-0547-37: RNCC: 3 | RNVC: 2

15 Sep 1993

5340-14-501-9555
Mounting Plate

145019555
332A08-4684-32: RNCC: 3 | RNVC: 2

19 Nov 1997

5340-14-503-6519
Angle Bracket

145036519
365A27-3610-3501: RNCC: 3 | RNVC: 2

21 Jan 1998

5340-14-299-1214
Retaining Strap

142991214
121E63-415-02-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-473-3942
Pad Eye

144733942
332A55-1082-01: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-14-420-7276
Flush Lock

144207276
1201-10G636: RNCC: 3 | RNVC: 2
45066: RNCC: 5 | RNVC: 2

16 Dec 1987

5340-14-551-2529
Rim Latch

145512529
930010S100-02A: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-455-1208
Strap Fastener Loop

144551208
34209-140-251: RNCC: 3 | RNVC: 2
34209-251-140: RNCC: 5 | RNVC: 2
5045004: RNCC: 5 | RNVC: 9

1 May 1992

5340-14-464-8293
Mortise Lock Set

144648293
484C-2-1N: RNCC: 3 | RNVC: 2

1 Sep 1993

5340-14-296-1348
T Plate

142961348
341A55-1057-20: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-346-7961
Retaining Strap

143467961
11-593-300: RNCC: 3 | RNVC: 2
11-593-300: RNCC: 5 | RNVC: 9
11593300: RNCC: 5 | RNVC: 9

19 Jan 1978

5340-14-398-7505
Access Cover

143987505
5000806974: RNCC: 3 | RNVC: 2
D77433-11: RNCC: 3 | RNVC: 2
D77433-11: RNCC: 3 | RNVC: 9
5000806974: RNCC: 5 | RNVC: 9

6 Feb 1985

5340-14-549-7773
Mounting Bracket

145497773
215671-0: RNCC: 3 | RNVC: 2

11 May 2006

5340-14-381-2712
Synchro Clamp

143812712
4230083524: RNCC: 3 | RNVC: 2
4230083524: RNCC: 5 | RNVC: 2
909752403: RNCC: 5 | RNVC: 2
909752403: RNCC: 5 | RNVC: 2

25 Jan 1983

5340-14-545-2463
Mounting Bracket

145452463
S212A20A1004: RNCC: 1 | RNVC: 2
DR1715D02: RNCC: 3 | RNVC: 2

29 Mar 2005

5340-14-353-4900
Bow Handle

143534900
61392: RNCC: 3 | RNVC: 2
91261165: RNCC: 3 | RNVC: 2
91261165: RNCC: 5 | RNVC: 2
91261165: RNCC: 5 | RNVC: 9

16 Jan 1979

5340-14-383-2015
Bumper

143832015
0PHD20-684897E: RNCC: 3 | RNVC: 2
0684897E0000: RNCC: 5 | RNVC: 2

17 Mar 1983

5340-14-242-9012
Access Cover

142429012
6034189: RNCC: 3 | RNVC: 2
600910: RNCC: 5 | RNVC: 2
0603418900: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-507-9087
Runner

145079087
14 147877 00: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-313-4880
Bridge Clamp

143134880
489016: RNCC: 3 | RNVC: 2
20489016-8: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-543-9793
Utility Access Door

145439793
4773322090: RNCC: 3 | RNVC: 9

19 Dec 2004

5340-14-416-0524
Anchor Strap

144160524
BJM01300: RNCC: 3 | RNVC: 2

3 Jun 1987

5340-14-521-4092
Mounting Bracket

145214092
10501428: RNCC: 3 | RNVC: 2

26 Jul 2000

5340-14-421-7558
Access Cover

144217558
044U-20792P: RNCC: 3 | RNVC: 2
904276M: RNCC: 5 | RNVC: 2
89408292: RNCC: 5 | RNVC: 2

27 Jan 1988

5340-14-484-9017
Metal Grille

144849017
189307-214: RNCC: 3 | RNVC: 9

12 Dec 1996

5340-14-519-4782
Loop Clamp

145194782
11200012028: RNCC: 3 | RNVC: 2
432236: RNCC: 5 | RNVC: 9

22 Mar 2000

5340-14-453-2985
Access Cover

144532985
16170455: RNCC: 3 | RNVC: 2

12 Feb 1992

5340-14-496-2348
Utility Access Door

144962348
75125-5: RNCC: 3 | RNVC: 2
F300 0T 021 0527: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-341-7827
Angle Bracket

143417827
0428549800: RNCC: 3 | RNVC: 2
0428549800: RNCC: 3 | RNVC: 2
0428549800: RNCC: 5 | RNVC: 9

14 Apr 1977

5340-14-549-3553
Mounting Plate

145493553
RA1M701924181: RNCC: 3 | RNVC: 2

24 Mar 2006

5340-14-410-2541
Access Cover

144102541
0308120730: RNCC: 3 | RNVC: 2
89404315: RNCC: 5 | RNVC: 2

18 Jun 1986

5340-14-548-3621
Mounting Bracket

145483621
5010051360: RNCC: 3 | RNVC: 2

10 Jan 2006

5340-14-355-2547
Clamping Catch

143552547
GP21ZB: RNCC: 3 | RNVC: 2

19 Mar 1979

5340-14-528-5920
Access Cover

145285920
935579: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-474-6777
Access Cover

144746777
44030297: RNCC: 3 | RNVC: 2
44030297: RNCC: 5 | RNVC: 9

22 Feb 1995

5340-14-313-6967
Mounting Bracket

143136967
0064760540: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-551-3536
Angle Bracket

145513536
RA1A703116553: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-544-3993
Mounting Bracket

145443993
22355-878: RNCC: 3 | RNVC: 2

26 Jan 2005

5340-14-293-6287
Loop Clamp

142936287
0176-561001: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-552-8829
Mounting Bracket

145528829
82032422000: RNCC: 3 | RNVC: 2

10 Feb 2007

5340-14-416-1161
Bumper

144161161
206992: RNCC: 3 | RNVC: 2

3 Jun 1987

5340-14-301-7417
Cover Strip

143017417
ST104M4-1-12P29: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-311-5888
Butt Hinge

143115888
45-40CHR0ME: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-542-8983
Synchro Clamp

145428983
708120S100-17A: RNCC: 3 | RNVC: 2

14 Aug 2004

5340-14-535-9216
Mounting Plate

145359216
61-02-1669: RNCC: 3 | RNVC: 2

1 Jul 2003

5340-14-031-9616
Bumper

140319616
764973-04: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-410-3093
Doorstop

144103093
332A22-1451-0201: RNCC: 3 | RNVC: 2
332A22-1451-02: RNCC: 5 | RNVC: 2

18 Jun 1986

5340-14-350-3169
Mending Plate

143503169
903-308: RNCC: 3 | RNVC: 2
903-308: RNCC: 5 | RNVC: 2
0036856T00: RNCC: 5 | RNVC: 9

7 Oct 1998

5340-14-458-7797
Mounting Bracket

144587797
MN03/09-55: RNCC: 3 | RNVC: 2
MN03/09-04-55: RNCC: 5 | RNVC: 2

4 Nov 1992

5340-14-497-8730
Access Cover

144978730
NO PRIMARY REF14-497-8730: RNCC: 3 | RNVC: 2
46832575: RNCC: 5 | RNVC: 2
F300 0T 022 9513: RNCC: 6 | RNVC: 9

22 Oct 1997

5340-14-525-3113
Mounting Bracket

145253113
330A93-6312-22: RNCC: 3 | RNVC: 2

23 May 2001

5340-14-306-8723
Rod End Clevis

143068723
103-36-19: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-395-0066
Flush Catch

143950066
NO PRIMARY REF14-395-0066: RNCC: 3 | RNVC: 2
362169REP8: RNCC: 5 | RNVC: 9

2 Oct 1984

5340-14-411-0160
Loop Clamp

144110160
202C251-13: RNCC: 3 | RNVC: 9

29 Jul 1986

5340-14-318-3138
Mending Plate

143183138
26-810040-14: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-533-8835
Cover Strip

145338835
42-250-214: RNCC: 3 | RNVC: 2
SZ42.250.214: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-424-1153
Expansion Plug

144241153
25PARKERISE: RNCC: 3 | RNVC: 2
E29584-25AT: RNCC: 5 | RNVC: 2

14 May 1988

5340-14-334-4361
Retaining Strap

143344361
T20-13F913: RNCC: 3 | RNVC: 2

1 Jun 1976

5340-14-467-5664
Loop Clamp

144675664
312-11322-001: RNCC: 3 | RNVC: 2

19 Jan 1994

5340-14-444-7768
Protection Bellows

144447768
E44463-37: RNCC: 3 | RNVC: 2
A90082812: RNCC: 3 | RNVC: 2

21 Jan 1991

5340-14-419-2046
Swivel Caster

144192046
SP5PD160-23R40: RNCC: 3 | RNVC: 2

13 Oct 1987

5340-14-524-9434
Bumper

145249434
350A21-1027-31: RNCC: 3 | RNVC: 2

3 May 2001

5340-14-475-0778
Mounting Plate

144750778
DM2-3008700: RNCC: 3 | RNVC: 2

16 Mar 1995

5340-14-340-9017
Angle Bracket

143409017
330A21-2062-21: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-231-2395
Rod End Clevis

142312395
5044-1010: RNCC: 3 | RNVC: 2
0948411904: RNCC: 5 | RNVC: 2
0948411904: RNCC: 5 | RNVC: 9
948411904: RNCC: 5 | RNVC: 9
5044-1010: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-224-4539
Retaining Strap

142244539
NO PRIMARY REF14-224-4539: RNCC: 3 | RNVC: 2
23094: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-411-1770
Rod End Clevis

144111770
332A57-1942-20: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-386-5060
Loop Clamp

143865060
320-060-001-0: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-296-1481
Mending Plate

142961481
341A89-0010-35: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-231-9237
Loop Clamp

142319237
502-507-434-0: RNCC: 3 | RNVC: 2
502-507-434-0: RNCC: 8 | RNVC: 2

1 Jan 1967

5340-14-289-6410
Angle Bracket

142896410
121E27-461-11-0: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-479-4055
Section Block Clamp

144794055
RA1M210108381: RNCC: 3 | RNVC: 2

10 Jan 1996

5340-14-350-4579
Mending Plate

143504579
208743: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-504-4453
Bail Handle

145044453
2095-301A508: RNCC: 3 | RNVC: 2
2095-301A508: RNCC: 5 | RNVC: 2

17 Feb 1998

5340-14-326-7447
Handwheel

143267447
ECHH90A3-3REP1: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-536-8711
Mounting Bracket

145368711
030472: RNCC: 3 | RNVC: 2
30472: RNCC: 5 | RNVC: 2

17 Sep 2003

5340-14-426-4660
Cover Strip

144264660
CJ66X194X80X1,5AG3: RNCC: 3 | RNVC: 2

1 Sep 1988

5340-14-519-9466
Mounting Plate

145199466
009930008P: RNCC: 3 | RNVC: 2

26 Apr 2000

5340-14-385-1109
Loop Clamp

143851109
M04VW3021383820: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-429-1264
Butt Hinge

144291264
058060T22313: RNCC: 3 | RNVC: 2
058060T: RNCC: 5 | RNVC: 2

11 Jan 1989

5340-14-394-9661
Angle Bracket

143949661
20320639: RNCC: 3 | RNVC: 2
20320639: RNCC: 5 | RNVC: 9

2 Oct 1984

5340-14-252-1450
Loop Clamp

142521450
4037: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-310-4694
Angle Bracket

143104694
A10-50-150-11-0: RNCC: 3 | RNVC: 2
A10-50-150-11-0: RNCC: 3 | RNVC: 2
A10-50-150-11-0: RNCC: 5 | RNVC: 2
85-653-1287: RNCC: 6 | RNVC: 9

1 Jan 1974

5340-14-509-6777
Pipe Hanger

145096777
RA1M702502731: RNCC: 3 | RNVC: 2

28 Oct 1998

5340-14-351-3709
Angle Bracket

143513709
501-730-576-0: RNCC: 3 | RNVC: 2
85-689-8134: RNCC: 6 | RNVC: 9

10 Aug 1978

5340-14-529-5590
Mounting Bracket

145295590
330A65-8511-0002: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-550-2338
Loop Clamp

145502338
501-804-699-0: RNCC: 3 | RNVC: 2

13 Jun 2006

5340-14-546-8131
Loop Clamp

145468131
FRF513-010.604: RNCC: 1 | RNVC: 2
58 0 101 604: RNCC: 3 | RNVC: 2
580 101 604: RNCC: 3 | RNVC: 9
FRF513-010-604: RNCC: 5 | RNVC: 9
FRF513-101-604: RNCC: 5 | RNVC: 9
649-411-604-0: RNCC: 5 | RNVC: 9

25 Aug 2005

5340-14-308-3610
Loop Clamp

143083610
240-000-25354: RNCC: 3 | RNVC: 2
E4M701-55-840: RNCC: 3 | RNVC: 2
25354: RNCC: 5 | RNVC: 2
HB28-4-2S06: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-527-0495
Loop Clamp

145270495
620-858-554-0: RNCC: 3 | RNVC: 2

26 Sep 2001

5340-14-380-2659
Rod End Clevis

143802659
TB30-27222-000: RNCC: 3 | RNVC: 2

8 Nov 1982

5340-14-370-8734
Angle Bracket

143708734
303-995-301-0: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-285-5496
Rod End Clevis

142855496
NO PRIMARY REF14-285-5496: RNCC: 3 | RNVC: 2
ES42610: RNCC: 5 | RNVC: 2
ES42610: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-369-9713
Rigid Caster

143699713
3 62003: RNCC: 3 | RNVC: 2
62003: RNCC: 3 | RNVC: 9
3147230620039: RNCC: 5 | RNVC: 2
A224-03-15: RNCC: 5 | RNVC: 2
A224-03-15: RNCC: 5 | RNVC: 9

18 May 1981

5340-14-496-9187
Mounting Plate

144969187
490127-36019-00: RNCC: 3 | RNVC: 2
F300 0T 022 2684: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-456-1039
Crank Handle

144561039
130079: RNCC: 3 | RNVC: 2
DK1 30079: RNCC: 5 | RNVC: 2
011-2-1REP29: RNCC: 5 | RNVC: 2

18 Jun 1992

5340-14-535-9048
Mounting Plate

145359048
5634194D00: RNCC: 3 | RNVC: 2
5634194D00: RNCC: 5 | RNVC: 2

27 Jun 2003

5340-14-480-2272
Mounting Bracket

144802272
0870294Y00: RNCC: 3 | RNVC: 2

28 Feb 1996

5340-14-479-8028
Rope Cleat

144798028
11095T900102: RNCC: 3 | RNVC: 2

7 Feb 1996

5340-14-250-4122
Retaining Strap

142504122
ST406M53P127: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-553-4590
Pipe Hanger

145534590
DA1N203765045: RNCC: 3 | RNVC: 2

5 Apr 2007

5340-14-457-3741
Strap Hinge

144573741
62D8404A: RNCC: 3 | RNVC: 2

27 Aug 1992

5340-14-535-2382
Mounting Bracket

145352382
6501PSE100004: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-413-9098
Lock-Release Lever

144139098
70454: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-349-2908
Access Cover

143492908
1048264: RNCC: 3 | RNVC: 2
1048264: RNCC: 5 | RNVC: 2

22 May 1978

5340-14-533-0874
Plug Button

145330874
482180: RNCC: 3 | RNVC: 2

22 Jan 2003

5340-14-254-4952
Retaining Strap

142544952
0000324085: RNCC: 3 | RNVC: 2
0000324085: RNCC: 5 | RNVC: 9
324085: RNCC: 5 | RNVC: 9
T1160: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-388-6134
Tubular Fairlead

143886134
MBEU71804: RNCC: 3 | RNVC: 2
034824: RNCC: 5 | RNVC: 2

3 Nov 1983

5340-14-422-1917
Anchor Strap

144221917
121406: RNCC: 3 | RNVC: 2

24 Feb 1988

5340-14-395-7604
Rod End Clevis

143957604
DA1D571235100: RNCC: 3 | RNVC: 2

30 Oct 1984

5340-14-274-5880
Loop Clamp

142745880
H7P: RNCC: 3 | RNVC: 2
0146318Y00: RNCC: 5 | RNVC: 2
4895731: RNCC: 5 | RNVC: 2
99061722: RNCC: 5 | RNVC: 2
12230847-0: RNCC: 5 | RNVC: 2
99061722: RNCC: 5 | RNVC: 2
146318Y: RNCC: 5 | RNVC: 2
458435-7: RNCC: 5 | RNVC: 2
13941580-3: RNCC: 5 | RNVC: 2
HP7: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-380-3038
Loop Clamp

143803038
61300005013: RNCC: 3 | RNVC: 2
71N13: RNCC: 5 | RNVC: 2
71N13: RNCC: 5 | RNVC: 2

8 Nov 1982

5340-14-541-8641
Mounting Bracket

145418641
350A84-0053-20: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-470-5106
Mounting Bracket

144705106
23210643-1: RNCC: 3 | RNVC: 2

22 Jun 1994

5340-14-282-0801
Loop Clamp

142820801
14SD1094-6: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-412-1629
Access Cover

144121629
NO PRIMARY REF14-412-1629: RNCC: 3 | RNVC: 2
5434467U: RNCC: 5 | RNVC: 2
079398D: RNCC: 5 | RNVC: 9

8 Oct 1986

5340-14-443-0519
Cover Strip

144430519
PM1A218100014: RNCC: 3 | RNVC: 2
PM1A218100014: RNCC: 5 | RNVC: 2

7 Nov 1990

5340-14-431-7734
Mounting Bracket

144317734
256915: RNCC: 3 | RNVC: 2

10 May 1989

5340-14-532-4282
Bumper

145324282
PM1A805110053: RNCC: 3 | RNVC: 2
PM1A805110053: RNCC: 5 | RNVC: 2

30 Oct 2002

5340-14-413-7650
Loop Clamp

144137650
A0021-31F21: RNCC: 3 | RNVC: 2

15 Jan 1987

5340-14-303-2014
Loop Clamp

143032014
A10-52-528-00-1: RNCC: 3 | RNVC: 2
A10-52-528-00-1: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-278-3304
Pipe Hanger

142783304
160-11523-38: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-349-2410
Support Hook

143492410
NO PRIMARY REF14-349-2410: RNCC: 3 | RNVC: 2
4720: RNCC: 5 | RNVC: 9

22 May 1978

5340-14-390-8918
Angle Bracket

143908918
ST159-2M27P29: RNCC: 3 | RNVC: 2
J05087-027-1000P029: RNCC: 5 | RNVC: 2

1 Mar 1984

5340-14-529-8418
Ladder Safety Shoe

145298418
9007/010: RNCC: 3 | RNVC: 2
SYB4948: RNCC: 5 | RNVC: 2

17 Apr 2002

5340-14-220-3506
Angle Bracket

142203506
3130S72-13-012: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-382-9265
Mending Plate

143829265
477021090960: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-323-7454
Angle Bracket

143237454
66819: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-394-1620
Butt Hinge

143941620
1001-30X19LAIT0N: RNCC: 3 | RNVC: 2

23 Jun 1984

5340-14-501-6003
Mounting Bracket

145016003
46062318: RNCC: 3 | RNVC: 2
46062318: RNCC: 5 | RNVC: 2
F300 0T 025 0268: RNCC: 6 | RNVC: 9

5 Nov 1997

5340-14-549-8250
Mounting Plate

145498250
2092741: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-555-7210
Loop Clamp

145557210
12317021011: RNCC: 3 | RNVC: 2

10 Dec 2007

5340-14-440-1853
Angle Bracket

144401853
330A65-8598-61: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-551-7903
Mounting Bracket

145517903
25225299-00: RNCC: 3 | RNVC: 2

24 Oct 2006

5340-14-283-0917
Bumper

142830917
511-421-082REP25: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-244-5449
Bumper

142445449
NO PRIMARY REF14-244-5449: RNCC: 3 | RNVC: 2
22655: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-506-4210
Handwheel

145064210
A0145-024F5: RNCC: 3 | RNVC: 2

27 Apr 1998

5340-14-335-7877
Rod End Clevis

143357877
330A21-1615-21: RNCC: 3 | RNVC: 2

30 Jun 1976

5340-14-414-8029
Angle Bracket

144148029
132504: RNCC: 3 | RNVC: 2

12 Mar 1987

5340-14-323-6434
Access Cover

143236434
6510P: RNCC: 3 | RNVC: 9
6510: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-433-5391
Runner

144335391
8164606: RNCC: 3 | RNVC: 2

2 Aug 1989

5340-14-489-5372
Mounting Plate

144895372
29452319: RNCC: 3 | RNVC: 2

30 Jul 1997

5340-14-445-8405
Rod End Clevis

144458405
2792183MI: RNCC: 3 | RNVC: 2

27 Feb 1991

5340-14-448-5548
Retaining Strap

144485548
11462: RNCC: 3 | RNVC: 2
11462: RNCC: 5 | RNVC: 2

1 Jul 1991

5340-14-526-5433
Mounting Bracket

145265433
DA2C207211A1: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-539-8578
Mounting Bracket

145398578
S720A3001201: RNCC: 3 | RNVC: 2

11 Feb 2004

5340-14-548-6143
Mounting Bracket

145486143
RA1B702606097: RNCC: 3 | RNVC: 2

27 Jan 2006

5340-14-398-0555
Access Cover

143980555
616694: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-388-8667
Lock-Release Lever

143888667
ST438M12P19: RNCC: 3 | RNVC: 2
391915: RNCC: 5 | RNVC: 2

29 Nov 1983

5340-14-511-6669
Mounting Bracket

145116669
019194A01TM79: RNCC: 3 | RNVC: 2

8 Jan 1999

5340-14-386-4979
Access Cover

143864979
0120640016: RNCC: 3 | RNVC: 2
0120640016: RNCC: 5 | RNVC: 2

24 Aug 1983

5340-14-438-6825
Plug Button

144386825
WW3X: RNCC: 3 | RNVC: 2

28 Mar 1990

5340-14-440-4098
Cover Strip

144404098
DA2C281740027: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-524-1766
Locking Stay

145241766
2251107: RNCC: 3 | RNVC: 2

7 Mar 2001

5340-14-237-5239
Access Cover

142375239
70808215: RNCC: 3 | RNVC: 2
70808215: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-533-6249
Mounting Plate

145336249
D105956B: RNCC: 3 | RNVC: 2

12 Feb 2003

5340-14-527-3945
Mounting Plate

145273945
H145604: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-14-344-2482
Access Cover

143442482
24171: RNCC: 3 | RNVC: 2

10 Aug 1977

5340-14-545-3190
Loop Clamp

145453190
8302576: RNCC: 3 | RNVC: 2

4 Apr 2005

5340-14-525-8342
Utility Access Door

145258342
F135021: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-381-2220
Access Cover

143812220
5412340: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-434-3595
Mounting Bracket

144343595
8814433000: RNCC: 3 | RNVC: 2
89402344: RNCC: 5 | RNVC: 2

20 Sep 1989

5340-14-445-4357
Shelf Bracket

144454357
R262-15-4: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-14-467-7572
Mounting Bracket

144677572
312-16153-001: RNCC: 3 | RNVC: 2

27 Jan 1994

5340-14-372-6025
Slide Keeper

143726025
11323-021-156: RNCC: 3 | RNVC: 2

21 Sep 1981

5340-14-541-1809
Loop Clamp

145411809
51-3-1-31-03-010: RNCC: 3 | RNVC: 2

18 May 2004

5340-14-377-1194
Access Cover

143771194
16119-286-004: RNCC: 3 | RNVC: 2
16119-286-004: RNCC: 5 | RNVC: 2
16119286004: RNCC: 5 | RNVC: 9

17 May 1982

5340-14-542-4130
Mounting Plate

145424130
5302835-039-A-01: RNCC: 3 | RNVC: 2
5302835-039A01: RNCC: 5 | RNVC: 2

9 Jul 2004

5340-14-496-9933
Cover Strip

144969933
13-124-00: RNCC: 3 | RNVC: 2
13-124-00: RNCC: 5 | RNVC: 9
F300 0T 022 4629: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-541-9908
Loop Clamp

145419908
20030-196: RNCC: 3 | RNVC: 2
502114001006A: RNCC: 3 | RNVC: 9

2 Jul 2004

5340-14-428-5495
Rod End Clevis

144285495
4603EHA000-0003: RNCC: 3 | RNVC: 2

8 Dec 1988

5340-14-524-2001
Access Cover

145242001
ST159-2M666P121: RNCC: 3 | RNVC: 2

7 Mar 2001

5340-14-367-4585
Angle Bracket

143674585
A11A221260512: RNCC: 3 | RNVC: 2

11 Dec 1980

5340-14-499-3633
Loop Clamp

144993633
5001831235: RNCC: 3 | RNVC: 2
044460001018: RNCC: 5 | RNVC: 2
F300 0T 021 7581: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-473-3177
Angle Bracket

144733177
503B103: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-14-506-8520
Bridge Clamp

145068520
B47129: RNCC: 3 | RNVC: 2

27 May 1998

5340-14-440-2886
Retaining Strap

144402886
39530809: RNCC: 3 | RNVC: 2
39530809: RNCC: 5 | RNVC: 9

11 Jul 1990

5340-14-400-8270
Angle Bracket

144008270
15448033: RNCC: 3 | RNVC: 2

21 May 1985

5340-14-260-4720
Loop Clamp

142604720
26188: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-520-1812
Mounting Bracket

145201812
40503295: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-554-0831
Loop Clamp

145540831
604 034: RNCC: 3 | RNVC: 2
604 034: RNCC: 3 | RNVC: 2

11 Jun 2007

5340-14-460-9904
Angle Bracket

144609904
5000603031: RNCC: 3 | RNVC: 2

17 Feb 1993

5340-14-303-3260
Angle Bracket

143033260
176907: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-548-9188
Webbing Strap

145489188
31654: RNCC: 3 | RNVC: 2

23 Feb 2006

5340-14-518-9362
Mounting Plate

145189362
MB3328F00: RNCC: 3 | RNVC: 2

29 Feb 2000

5340-14-338-2214
Rod End Connector

143382214
S6165-61568: RNCC: 3 | RNVC: 2
00-933-4145: RNCC: 6 | RNVC: 9

6 Nov 1976

5340-14-319-0305
Casement Fastener

143190305
0SAB05-000000-00A1: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-453-7534
Access Cover

144537534
2085-06-002: RNCC: 3 | RNVC: 2
89411714: RNCC: 5 | RNVC: 9

5 Mar 1992

5340-14-354-1412
Detent Plunger

143541412
3120043: RNCC: 3 | RNVC: 2
3120043: RNCC: 5 | RNVC: 2
4-001-36-23011: RNCC: 5 | RNVC: 2
894697: RNCC: 5 | RNVC: 2

16 Jan 1979

5340-14-266-8287
Mounting Plate

142668287
515-100: RNCC: 3 | RNVC: 2
515100: RNCC: 3 | RNVC: 2
99044161: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-389-6206
Detent Plunger

143896206
M11-24: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-469-7760
Mounting Plate

144697760
1-090-1B: RNCC: 3 | RNVC: 2

10 May 1994

5340-14-349-7490
Access Cover

143497490
053M22-551024F: RNCC: 3 | RNVC: 2
16683079: RNCC: 5 | RNVC: 2
053M22-551024F: RNCC: 5 | RNVC: 2
0551024F00: RNCC: 5 | RNVC: 2
16683079: RNCC: 5 | RNVC: 2

14 Jun 1978

5340-14-434-1157
Bumper

144341157
TLH0TB193-1: RNCC: 3 | RNVC: 2
TLHOTB193-1: RNCC: 5 | RNVC: 2

6 Sep 1989

5340-14-381-7860
Mounting Plate

143817860
16761023: RNCC: 3 | RNVC: 2
16761023: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-548-9025
Mounting Plate

145489025
10711210000: RNCC: 3 | RNVC: 2

22 Feb 2006

5340-14-548-9474
Mounting Bracket

145489474
82140059000: RNCC: 3 | RNVC: 2

24 Feb 2006

5340-14-423-3195
Retaining Strap

144233195
JWAT102: RNCC: 3 | RNVC: 2

14 Apr 1988

5340-14-477-2816
Retaining Clip

144772816
47SC67: RNCC: 3 | RNVC: 9
47SC67: RNCC: 5 | RNVC: 2

4 Aug 1995

5340-14-507-0876
Mounting Bracket

145070876
10506411: RNCC: 3 | RNVC: 2

10 Jun 1998

5340-14-497-4020
Bridge Clamp

144974020
13933: RNCC: 3 | RNVC: 2
13933: RNCC: 5 | RNVC: 2
F300 0T 023 1299: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-324-9613
Snap Hook

143249613
4030-60-210: RNCC: 3 | RNVC: 2
D1553-8941: RNCC: 5 | RNVC: 2
4030-60-218: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-390-1396
Flush Catch Claw

143901396
366A25-1229-20: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-14-453-5456
Access Cover

144535456
21320314: RNCC: 3 | RNVC: 2
21320314-4: RNCC: 5 | RNVC: 2

26 Feb 1992

5340-14-540-3110
Access Cover

145403110
10670677000: RNCC: 3 | RNVC: 2

18 Mar 2004

5340-14-369-7708
Angle Bracket

143697708
A21A211178050: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-543-7494
Access Cover

145437494
4483590: RNCC: 3 | RNVC: 2

9 Dec 2004

5340-14-374-6089
Rod End Clevis

143746089
0031432021: RNCC: 3 | RNVC: 2
0031432021: RNCC: 5 | RNVC: 9
31432021: RNCC: 5 | RNVC: 9

30 Jan 1982

5340-14-553-5833
Access Cover

145535833
61016553: RNCC: 3 | RNVC: 2

19 Apr 2007

5340-14-545-1232
Swivel Caster

145451232
5321018: RNCC: 3 | RNVC: 2
8043544L00: RNCC: 5 | RNVC: 2

18 Mar 2005

5340-14-390-9005
Handle Grip

143909005
2104553-40: RNCC: 3 | RNVC: 2

1 Mar 1984

5340-14-332-8520
Access Cover

143328520
0000147038: RNCC: 3 | RNVC: 2
0000147038: RNCC: 5 | RNVC: 9
147038: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-445-4952
Rod End Clevis

144454952
ST406M21P76: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-14-208-1437
Access Cover

142081437
100246: RNCC: 3 | RNVC: 9

1 Jan 1964

5340-14-387-1966
Mending Plate

143871966
108065152201R04: RNCC: 3 | RNVC: 2
108065152201R04: RNCC: 5 | RNVC: 2

24 Aug 1983

5340-14-520-3601
Mounting Plate

145203601
5230175: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-512-7302
Retaining Clip

145127302
1833-51-52: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-466-2994
Mounting Bracket

144662994
A68573: RNCC: 3 | RNVC: 2

3 Nov 1993

5340-14-507-6026
Pipe Hanger

145076026
PM1A593334003A1: RNCC: 3 | RNVC: 2
PM1A593334003A1: RNCC: 5 | RNVC: 2

27 Jul 1998

5340-14-530-0219
Mounting Plate

145300219
10384248: RNCC: 3 | RNVC: 2

30 Apr 2002

5340-14-509-3462
Mounting Plate

145093462
25X10X2MM: RNCC: 3 | RNVC: 2

28 Oct 1998

5340-14-336-7233
Support Hook

143367233
189961: RNCC: 3 | RNVC: 2

7 Oct 1976

5340-14-426-4670
Cover Strip

144264670
CJ130X258X80X1,5AG3: RNCC: 3 | RNVC: 2

1 Sep 1988

5340-14-507-3442
Stand Base

145073442
6000027: RNCC: 3 | RNVC: 2
6000027: RNCC: 5 | RNVC: 9

29 Jun 1998

5340-14-501-6078
Mounting Plate

145016078
F300 0T 025 1239: RNCC: 3 | RNVC: 2
45594909: RNCC: 5 | RNVC: 2

5 Nov 1997

5340-14-467-1137
Angle Bracket

144671137
16959384: RNCC: 3 | RNVC: 2
16959384: RNCC: 5 | RNVC: 9

16 Dec 1993

5340-14-532-0117
Mounting Bracket

145320117
J0001745: RNCC: 3 | RNVC: 2

9 Oct 2002

5340-14-436-8511
Cover Strip

144368511
DA2C264931061: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-417-7345
Butt Hinge

144177345
DA2C88P022010: RNCC: 3 | RNVC: 2
91615613: RNCC: 5 | RNVC: 2

22 Jul 1987

5340-14-416-7066
Angle Bracket

144167066
534961: RNCC: 3 | RNVC: 2

25 Jun 1987

5340-14-475-0848
Angle Bracket

144750848
1082570K00: RNCC: 3 | RNVC: 2

16 Mar 1995

5340-14-551-8856
Mounting Bracket

145518856
0025701: RNCC: 3 | RNVC: 2

6 Nov 2006

5340-14-505-0909
Mounting Bracket

145050909
03944801: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-263-3799
Retaining Strap

142633799
R113448: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-493-5063
Angle Bracket

144935063
5005028000: RNCC: 3 | RNVC: 2
F300 0T 013 3145: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-513-8097
Bridge Clamp

145138097
DE33105: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-14-472-3753
Pipe Hanger

144723753
PM1A522144007: RNCC: 3 | RNVC: 2
PM1A522144007: RNCC: 5 | RNVC: 2

19 Oct 1994

5340-14-514-9655
Compression Cup

145149655
46246365: RNCC: 3 | RNVC: 2
46246365: RNCC: 5 | RNVC: 9

23 Jun 1999

5340-14-270-9263
Webbing Strap

142709263
AL37: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-501-0053
Bow Handle

145010053
10020169: RNCC: 3 | RNVC: 2
F300 0T 025 0346: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-422-2993
Pipe Hanger

144222993
304-067-401-0: RNCC: 3 | RNVC: 2

24 Feb 1988

5340-14-329-1531
Access Cover

143291531
78476-27: RNCC: 3 | RNVC: 2
85-679-3930: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-533-5710
Utility Access Door

145335710
CRP401-381-440N2: RNCC: 3 | RNVC: 2

12 Feb 2003

5340-14-384-7799
Angle Bracket

143847799
16661839: RNCC: 3 | RNVC: 2
16661839: RNCC: 5 | RNVC: 9

2 Jun 1983

5340-14-444-4130
Runner

144444130
20729504: RNCC: 3 | RNVC: 2
20729504: RNCC: 5 | RNVC: 9

9 Jan 1991

5340-14-541-9404
Mounting Bracket

145419404
501099004009A: RNCC: 3 | RNVC: 9

2 Jul 2004

5340-14-438-9019
Utility Access Door

144389019
332A61-6141-00: RNCC: 3 | RNVC: 2

11 Apr 1990

5340-14-518-2880
Rod End Clevis

145182880
MY20295-07815: RNCC: 3 | RNVC: 2

2 Feb 2000

5340-14-232-5176
Loop Clamp

142325176
55213-032-000ACL: RNCC: 3 | RNVC: 2
NSE552-13-32: RNCC: 5 | RNVC: 2
55213-32ACL: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-498-7620
Rod End Clevis

144987620
R12608-100-100AHU: RNCC: 2 | RNVC: 2
407-035: RNCC: 3 | RNVC: 2
F300 0T 008 3794: RNCC: 6 | RNVC: 9

29 Oct 1997

Load More Results