What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 96 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 96 of 446

5340-14-544-3398
Mounting Bracket

145443398
82062566000: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-14-530-8431
Mounting Plate

145308431
5808736P00: RNCC: 3 | RNVC: 2
5808736P00: RNCC: 5 | RNVC: 2

9 Jul 2002

5340-14-523-2510
Cover Strip

145232510
RA1M701916391: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-228-1564
Mending Plate

142281564
0325030: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-519-5538
Compression Cup

145195538
449246: RNCC: 3 | RNVC: 9

22 Mar 2000

5340-14-382-3833
Anchor Strap

143823833
BAZ94619: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-426-5157
Anchor Strap

144265157
05451: RNCC: 3 | RNVC: 9
J5451: RNCC: 5 | RNVC: 9

7 Sep 1988

5340-14-362-9815
Butt Hinge

143629815
0000783069: RNCC: 3 | RNVC: 2
0000783069: RNCC: 5 | RNVC: 9
783069: RNCC: 5 | RNVC: 9

3 Apr 1980

5340-14-531-3268
Loop Clamp

145313268
51313105033: RNCC: 3 | RNVC: 2

8 Aug 2002

5340-14-355-3444
Retaining Strap

143553444
330A65-4132-05: RNCC: 3 | RNVC: 2

19 Mar 1979

5340-14-448-2632
Rod End Clevis

144482632
PM1A331100021A1: RNCC: 3 | RNVC: 2
PM1A331100021A1: RNCC: 5 | RNVC: 2

18 Jun 1991

5340-14-489-6091
Mounting Bracket

144896091
0301040480: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-466-1561
Mounting Bracket

144661561
5210113: RNCC: 3 | RNVC: 2

27 Oct 1993

5340-14-476-6613
Mounting Bracket

144766613
F1251600: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-14-508-0433
Retaining Clip

145080433
052688: RNCC: 3 | RNVC: 9

26 Aug 1998

5340-14-533-9319
Runner

145339319
CH110: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-14-211-5320
Loop Clamp

142115320
FL147056: RNCC: 3 | RNVC: 2
141056: RNCC: 5 | RNVC: 9

1 Jan 1964

5340-14-483-8076
Detent Plunger

144838076
8000717K00: RNCC: 3 | RNVC: 2

3 Oct 1996

5340-14-448-6132
Mounting Plate

144486132
39067574: RNCC: 3 | RNVC: 2

4 Jul 1991

5340-14-526-4464
Angle Bracket

145264464
RA1M702201260: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-535-0668
Mounting Plate

145350668
02000041: RNCC: 3 | RNVC: 2

30 Apr 2003

5340-14-274-3267
Loop Clamp

142743267
12509225: RNCC: 3 | RNVC: 2
12509225: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-434-0396
Mounting Bracket

144340396
536400: RNCC: 3 | RNVC: 2

29 Aug 1989

5340-14-415-8922
Angle Bracket

144158922
TRSG05A057257: RNCC: 3 | RNVC: 2

26 May 1987

5340-14-257-5857
Mounting Plate

142575857
F116268: RNCC: 3 | RNVC: 2
TID19853: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-230-6275
Mending Plate

142306275
STQ156269: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-325-4578
Butt Hinge

143254578
AL80: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-409-0925
Runner

144090925
4771620110: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-14-325-9112
Key Blank

143259112
25511B6X9XC38: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-413-8853
Loop Clamp

144138853
153727: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-437-8344
Mounting Plate

144378344
89112273: RNCC: 3 | RNVC: 2

21 Feb 1990

5340-14-335-2906
Retaining Strap

143352906
196663: RNCC: 3 | RNVC: 2
89301955: RNCC: 5 | RNVC: 2

30 Jun 1976

5340-14-420-2127
Angle Bracket

144202127
413002020016: RNCC: 3 | RNVC: 2

25 Nov 1987

5340-14-479-3472
Anchor Strap

144793472
AT004PD008001: RNCC: 3 | RNVC: 9

10 Jan 1996

5340-14-403-7083
Access Cover

144037083
288380: RNCC: 3 | RNVC: 2
288380: RNCC: 5 | RNVC: 2

21 Aug 1985

5340-14-398-7511
Access Cover

143987511
5000044996: RNCC: 3 | RNVC: 2
5000044996: RNCC: 5 | RNVC: 9

6 Feb 1985

5340-14-402-1009
Rod End Clevis

144021009
400374: RNCC: 3 | RNVC: 2
BGE400374: RNCC: 5 | RNVC: 2

26 Jun 1985

5340-14-374-6088
Rod End Clevis

143746088
0031325039: RNCC: 3 | RNVC: 2
0031325039: RNCC: 5 | RNVC: 9
31325039: RNCC: 5 | RNVC: 9

30 Jan 1982

5340-14-295-1194
Rod End Clevis

142951194
281077: RNCC: 3 | RNVC: 2
281077: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-516-9406
Blank Panel

145169406
S694A315187003: RNCC: 3 | RNVC: 2

28 Oct 1999

5340-14-455-1938
Access Cover

144551938
1083140: RNCC: 3 | RNVC: 2
1083140: RNCC: 5 | RNVC: 2

7 May 1992

5340-14-526-8836
Mounting Bracket

145268836
35660072: RNCC: 3 | RNVC: 2

12 Sep 2001

5340-14-552-7674
Mounting Bracket

145527674
718484: RNCC: 3 | RNVC: 2

30 Jan 2007

5340-14-321-0102
Access Cover

143210102
15445903: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-444-9292
Access Cover

144449292
558663: RNCC: 3 | RNVC: 2

29 Jan 1991

5340-14-503-7213
Access Cover

145037213
01551700: RNCC: 3 | RNVC: 2

28 Jan 1998

5340-14-527-4072
Access Cover

145274072
P106022V: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-14-244-9636
Access Cover

142449636
151362: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-441-3159
Rod End Clevis

144413159
37153: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-438-6120
Rod End Clevis

144386120
TB1010512: RNCC: 3 | RNVC: 2

28 Mar 1990

5340-14-385-4724
Plug Button

143854724
108033000701: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-439-6865
Access Cover

144396865
16293763: RNCC: 3 | RNVC: 2
16293763: RNCC: 5 | RNVC: 9

16 May 1990

5340-14-501-8904
Mounting Bracket

145018904
38660670: RNCC: 3 | RNVC: 2
38660670: RNCC: 5 | RNVC: 9

19 Nov 1997

5340-14-368-3571
Access Cover

143683571
BBZ2106: RNCC: 3 | RNVC: 2

20 Feb 1981

5340-14-374-5998
Anchor Strap

143745998
5000535619: RNCC: 3 | RNVC: 2
5000535619: RNCC: 5 | RNVC: 9

30 Jan 1982

5340-14-422-7898
Mounting Plate

144227898
39232587: RNCC: 3 | RNVC: 2
39232587: RNCC: 5 | RNVC: 9

17 Mar 1988

5340-14-459-5891
Rod End Clevis

144595891
320320: RNCC: 3 | RNVC: 2
320320: RNCC: 5 | RNVC: 9

10 Dec 1992

5340-14-496-2507
Access Cover

144962507
F1627208: RNCC: 3 | RNVC: 2
F300 0T 021 0734: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-396-3536
Anchor Strap

143963536
1218973: RNCC: 3 | RNVC: 2
4083608: RNCC: 5 | RNVC: 2
4083608: RNCC: 5 | RNVC: 9
1218973: RNCC: 5 | RNVC: 9

27 Nov 1984

5340-14-480-1316
Access Cover

144801316
TEG001010400: RNCC: 3 | RNVC: 2

21 Feb 1996

5340-14-537-2159
Access Cover

145372159
3107628: RNCC: 3 | RNVC: 2
8012247E00: RNCC: 5 | RNVC: 2
3107628: RNCC: 5 | RNVC: 2

15 Oct 2003

5340-14-499-6104
Access Cover

144996104
74355: RNCC: 3 | RNVC: 2
F300 0T 023 5838: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-362-4471
Bow Handle

143624471
18410605: RNCC: 3 | RNVC: 2
18410605: RNCC: 5 | RNVC: 9

19 Mar 1980

5340-14-364-6417
Access Cover

143646417
100101: RNCC: 3 | RNVC: 2
VDPM02227: RNCC: 5 | RNVC: 2

2 Sep 1980

5340-14-305-7964
Access Cover

143057964
4081DET2: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-439-1888
Access Cover

144391888
16720355: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-530-6900
Mounting Plate

145306900
T533A1120222: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-14-521-1562
Access Cover

145211562
F1263849: RNCC: 3 | RNVC: 2
F1263849: RNCC: 5 | RNVC: 2

12 Jul 2000

5340-14-504-3202
Access Cover

145043202
3761902M91: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-352-7023
Access Cover

143527023
16448382: RNCC: 3 | RNVC: 2
16448382: RNCC: 3 | RNVC: 9

14 Nov 1978

5340-14-375-2783
Rod End Clevis

143752783
5000350337: RNCC: 3 | RNVC: 2
5000350337: RNCC: 5 | RNVC: 9

26 Feb 1982

5340-14-502-3909
Access Cover

145023909
45583671: RNCC: 3 | RNVC: 9

9 Dec 1997

5340-14-357-5401
Rod End Clevis

143575401
0CV180300201: RNCC: 3 | RNVC: 2
0CV180300201: RNCC: 5 | RNVC: 2

7 Jun 1979

5340-14-423-9880
Access Cover

144239880
20735100: RNCC: 3 | RNVC: 2
20735100: RNCC: 5 | RNVC: 9

5 May 1988

5340-14-412-1548
Rod End Clevis

144121548
220139: RNCC: 3 | RNVC: 2

8 Oct 1986

5340-14-508-2485
Access Cover

145082485
5010045268: RNCC: 3 | RNVC: 2
310658: RNCC: 5 | RNVC: 2

2 Sep 1998

5340-14-368-3564
Rod End Clevis

143683564
426005135: RNCC: 3 | RNVC: 9
5135: RNCC: 5 | RNVC: 9

20 Feb 1981

5340-14-445-0734
Access Cover

144450734
5171469300: RNCC: 3 | RNVC: 2

31 Jan 1991

5340-14-418-3068
Access Cover

144183068
006624031P: RNCC: 3 | RNVC: 2

12 Aug 1987

5340-14-343-1566
Access Cover

143431566
4770010260: RNCC: 3 | RNVC: 2

16 Jun 1977

5340-14-202-2125
Rod End Clevis

142022125
STE36: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-14-456-1167
Loop Clamp

144561167
Y8211194: RNCC: 3 | RNVC: 2

18 Jun 1992

5340-14-514-5152
Access Cover

145145152
30322504: RNCC: 3 | RNVC: 2

26 May 1999

5340-14-389-3503
Rod End Clevis

143893503
A11A263350122: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-264-2514
Loop Clamp

142642514
45N7: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-520-3596
Mounting Plate

145203596
5230170: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-526-6513
Lock-Release Lever

145266513
1118983W00: RNCC: 3 | RNVC: 2

13 Aug 2001

5340-14-358-4891
Angle Bracket

143584891
18369: RNCC: 3 | RNVC: 2

6 Sep 2000

5340-14-370-0311
Access Cover

143700311
77000057: RNCC: 3 | RNVC: 2
5000605510: RNCC: 5 | RNVC: 2
5000605510: RNCC: 5 | RNVC: 9

18 May 1981

5340-14-031-1719
Anchor Strap

140311719
VDP4956: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-367-4042
Access Cover

143674042
15626428: RNCC: 3 | RNVC: 2
15626428: RNCC: 5 | RNVC: 2
15626428: RNCC: 5 | RNVC: 9

11 Dec 1980

5340-14-031-8842
Webbing Strap

140318842
573905504: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-492-5490
Access Cover

144925490
5000922657: RNCC: 3 | RNVC: 2
F300 0T 007 9514: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-366-4877
Access Cover

143664877
11884: RNCC: 3 | RNVC: 2
11884: RNCC: 5 | RNVC: 9

20 Nov 1980

5340-14-464-3139
Anchor Strap

144643139
5260228: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-14-319-7214
Plug Button

143197214
0172180250: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-349-2561
Access Cover

143492561
5100273: RNCC: 3 | RNVC: 2
5000496415: RNCC: 5 | RNVC: 2
5000496415: RNCC: 5 | RNVC: 9

22 May 1978

5340-14-540-8252
Access Cover

145408252
X1568286: RNCC: 3 | RNVC: 2

23 Apr 2004

5340-14-434-1942
Access Cover

144341942
564470: RNCC: 3 | RNVC: 2

12 Sep 1989

5340-14-370-7172
Anchor Strap

143707172
198491: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-346-3273
Rod End Clevis

143463273
A11A722211108: RNCC: 3 | RNVC: 2

12 Dec 1977

5340-14-391-7763
Cover Strip

143917763
DA2C525092040: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-352-7551
Tee Hinge

143527551
140105: RNCC: 3 | RNVC: 2
140105: RNCC: 5 | RNVC: 2

14 Nov 1978

5340-14-482-3996
Door Hook And Eye

144823996
ISO20NCAA02: RNCC: 3 | RNVC: 2
F0029120: RNCC: 5 | RNVC: 9

11 Jul 1996

5340-14-224-2832
Webbing Strap

142242832
DL6-2-5: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-366-0457
Retaining Strap

143660457
19299953: RNCC: 3 | RNVC: 2

4 Nov 1980

5340-14-249-7769
Butt Hinge

142497769
ST406M52P13E16: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-448-0705
Butt Hinge

144480705
PM1A711024512: RNCC: 3 | RNVC: 2
PM1A711024512: RNCC: 5 | RNVC: 2

12 Jun 1991

5340-14-236-1878
Clamping Catch

142361878
GP09VERTARMEE: RNCC: 3 | RNVC: 2
111382: RNCC: 5 | RNVC: 2
G09: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-460-8788
Runner

144608788
46241216: RNCC: 3 | RNVC: 2
46241216: RNCC: 3 | RNVC: 9

12 Feb 1993

5340-14-274-7416
Compression Cup

142747416
6741: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-275-1775
Mending Plate

142751775
7203: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-446-3893
Retaining Strap

144463893
3511 191 95411: RNCC: 3 | RNVC: 2

18 Mar 1991

5340-14-453-1620
Bumper

144531620
970BEIGEN2: RNCC: 3 | RNVC: 2

5 Feb 1992

5340-14-533-2630
Clamping Catch

145332630
V116628B: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-14-552-8825
Mounting Bracket

145528825
82029823000: RNCC: 3 | RNVC: 2

10 Feb 2007

5340-14-341-7629
Mounting Bracket

143417629
002515080P: RNCC: 3 | RNVC: 2

14 Apr 1977

5340-14-554-3299
Mounting Bracket

145543299
82093911000: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-14-450-6367
Synchro Clamp

144506367
1101331: RNCC: 3 | RNVC: 2
1101331: RNCC: 5 | RNVC: 2

16 Oct 1991

5340-14-548-0967
Angle Bracket

145480967
RA1M701716107A1: RNCC: 3 | RNVC: 2

10 Dec 2005

5340-14-465-5515
Mounting Plate

144655515
A55600: RNCC: 3 | RNVC: 2

30 Sep 1993

5340-14-465-8896
Mounting Bracket

144658896
120069-179: RNCC: 3 | RNVC: 9
91720145: RNCC: 5 | RNVC: 2

14 Oct 1993

5340-14-444-1579
Mounting Plate

144441579
PM1A725449001A1: RNCC: 3 | RNVC: 2
PM1A725449001A1: RNCC: 5 | RNVC: 2

18 Dec 1990

5340-14-274-2656
Angle Bracket

142742656
153876: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-462-2857
Key Holder

144622857
SMCFAGEC0140: RNCC: 3 | RNVC: 2

15 Apr 1993

5340-14-420-5189
Loop Clamp

144205189
160G742449: RNCC: 3 | RNVC: 2

10 Dec 1987

5340-14-446-2480
Retaining Strap

144462480
093331W: RNCC: 3 | RNVC: 2

11 Mar 1991

5340-14-548-6282
Angle Bracket

145486282
RA1M704756121: RNCC: 3 | RNVC: 2

27 Jan 2006

5340-14-540-5333
Angle Bracket

145405333
19221463: RNCC: 3 | RNVC: 2

1 Apr 2004

5340-14-313-1699
Butt Hinge

143131699
M101761: RNCC: 3 | RNVC: 2
M101761: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-453-1616
Handle Grip

144531616
40190: RNCC: 3 | RNVC: 2

5 Feb 1992

5340-14-470-7878
Blank Panel

144707878
H44789: RNCC: 3 | RNVC: 2
89232511: RNCC: 5 | RNVC: 2
89280490: RNCC: 5 | RNVC: 2
H44789: RNCC: 5 | RNVC: 2

6 Jul 1994

5340-14-460-9987
Mounting Bracket

144609987
5000991631: RNCC: 3 | RNVC: 2

17 Feb 1993

5340-14-457-5987
Pipe Hanger

144575987
PM1A593114006: RNCC: 3 | RNVC: 2
PM1A593114006: RNCC: 5 | RNVC: 2

10 Sep 1992

5340-14-379-6242
Mounting Plate

143796242
16788316: RNCC: 3 | RNVC: 2
16788316: RNCC: 5 | RNVC: 9

20 Oct 1982

5340-14-448-9869
Mounting Bracket

144489869
BAZ98091: RNCC: 3 | RNVC: 2

24 Jul 1991

5340-14-520-7798
Arched Cushion

145207798
F1260736: RNCC: 3 | RNVC: 2
F1260736: RNCC: 5 | RNVC: 2

14 Jun 2000

5340-14-422-9165
Loop Clamp

144229165
259171: RNCC: 3 | RNVC: 2

24 Mar 1988

5340-14-440-0842
Protection Bellows

144400842
JOIN660: RNCC: 3 | RNVC: 2
JOIN660: RNCC: 5 | RNVC: 2

11 Jul 1990

5340-14-396-2282
Angle Bracket

143962282
222612: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-343-1572
Mending Plate

143431572
4770010330: RNCC: 3 | RNVC: 2

16 Jun 1977

5340-14-533-8593
Cover Strip

145338593
10-250-362: RNCC: 3 | RNVC: 2
Z210.250.362: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-422-5705
Angle Bracket

144225705
4772102630: RNCC: 3 | RNVC: 2

10 Mar 1988

5340-14-441-1132
Angle Bracket

144411132
20329948: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-323-3482
Detent Plunger

143233482
466-9M8P184: RNCC: 3 | RNVC: 2
466-9M8P184: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-226-7339
Angle Bracket

142267339
0336520: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-532-3650
Runner

145323650
RA1M260513313N1: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-14-445-3943
Mounting Plate

144453943
BLC238439: RNCC: 3 | RNVC: 2

13 Feb 1991

5340-14-528-4285
Retaining Clip

145284285
324666: RNCC: 3 | RNVC: 2
324666: RNCC: 5 | RNVC: 9

29 Jan 2002

5340-14-551-9471
Mounting Bracket

145519471
43081002: RNCC: 3 | RNVC: 2
43081002: RNCC: 3 | RNVC: 9

10 Nov 2006

5340-14-461-1652
Mounting Bracket

144611652
4772902210: RNCC: 3 | RNVC: 2
5046002: RNCC: 5 | RNVC: 9

24 Feb 1993

5340-14-523-0247
Angle Bracket

145230247
47139292: RNCC: 3 | RNVC: 2

18 Dec 2000

5340-14-449-3213
Clamp Bolt Assembly

144493213
571A202: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-14-475-2942
Mounting Bracket

144752942
4657085A: RNCC: 3 | RNVC: 2
4657085A: RNCC: 3 | RNVC: 9

29 Mar 1995

5340-14-548-6169
Angle Bracket

145486169
RA1B702606065: RNCC: 3 | RNVC: 2

27 Jan 2006

5340-14-549-5941
Angle Bracket

145495941
46241630: RNCC: 3 | RNVC: 2

20 Apr 2006

5340-14-395-9863
Retaining Strap

143959863
6503032G: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-527-2083
Loop Clamp

145272083
268518016: RNCC: 3 | RNVC: 2

12 Oct 2001

5340-14-540-6205
Mounting Bracket

145406205
38051038: RNCC: 3 | RNVC: 2
00312A: RNCC: 5 | RNVC: 2
4848ZG8613180059: RNCC: 6 | RNVC: 9

8 Apr 2004

5340-14-537-4458
Mounting Bracket

145374458
MECZ7004: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-445-7694
Access Cover

144457694
BLC235063: RNCC: 3 | RNVC: 2

25 Feb 1991

5340-14-408-6850
Access Cover

144086850
3001952: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-14-404-5213
Access Cover

144045213
403444: RNCC: 3 | RNVC: 2
403444: RNCC: 5 | RNVC: 9

20 Nov 1985

5340-14-424-0597
Webbing Strap

144240597
251787: RNCC: 3 | RNVC: 2

11 May 1988

5340-14-382-5604
Angle Bracket

143825604
20069126: RNCC: 3 | RNVC: 2
20069126: RNCC: 5 | RNVC: 9

17 Feb 1983

5340-14-549-3590
Bumper

145493590
10262 DG: RNCC: 3 | RNVC: 2

27 Mar 2006

5340-14-547-0425
Mounting Bracket

145470425
10565289: RNCC: 3 | RNVC: 2

17 Sep 2005

5340-14-475-6780
Rod Retainer Clip

144756780
91613007104: RNCC: 3 | RNVC: 2
SDM91613007104: RNCC: 5 | RNVC: 9
91613007104: RNCC: 5 | RNVC: 9

26 Apr 1995

5340-14-516-5341
Bumper

145165341
5010118256: RNCC: 3 | RNVC: 2

1 Oct 1999

5340-14-389-3001
Retaining Strap

143893001
2-16378: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-476-5349
Clamping Catch

144765349
1089994C00: RNCC: 3 | RNVC: 2

20 Jun 1995

5340-14-501-3193
Webbing Strap

145013193
ESA25-2: RNCC: 3 | RNVC: 2
F300 0T 025 3604: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-507-9896
Retaining Bail

145079896
4773124180: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-313-8926
Loop Clamp

143138926
51210605016: RNCC: 3 | RNVC: 2
20F16: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-480-9589
Track Stop

144809589
1302131P202: RNCC: 3 | RNVC: 2

11 Apr 1996

5340-14-367-3954
Runner

143673954
15171491: RNCC: 3 | RNVC: 2
15171491: RNCC: 5 | RNVC: 2
15171491: RNCC: 5 | RNVC: 9

11 Dec 1980

5340-14-560-2794
Utility Resilient Mount

145602794
J2828870: RNCC: 3 | RNVC: 2
CV150460: RNCC: 5 | RNVC: 2
J2828870: RNCC: 5 | RNVC: 2

7 Apr 2009

5340-14-448-7837
Mounting Plate

144487837
721B8007: RNCC: 3 | RNVC: 2
89469806: RNCC: 5 | RNVC: 2

10 Jul 1991

5340-14-258-3049
Control Rod

142583049
ST406M41P50: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-550-6233
Bumper

145506233
RA1B450150A1: RNCC: 3 | RNVC: 2

3 Jul 2006

5340-14-381-3164
Angle Bracket

143813164
2206-481A510: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-530-8211
Mounting Bracket

145308211
BA1020F00: RNCC: 3 | RNVC: 2
4CE1932: RNCC: 5 | RNVC: 2

8 Jul 2002

5340-14-501-6599
Access Cover

145016599
45283309: RNCC: 3 | RNVC: 2
45283309: RNCC: 3 | RNVC: 9

5 Nov 1997

5340-14-359-7294
Retaining Clip

143597294
BAZ3432: RNCC: 3 | RNVC: 2

15 Oct 1979

5340-14-515-6486
Lever Bracket

145156486
10514683: RNCC: 3 | RNVC: 2

21 Jul 1999

5340-14-527-5627
Metal Grille

145275627
DA1N202784800A2: RNCC: 3 | RNVC: 2

30 Oct 2001

5340-14-480-8364
Anchor Strap

144808364
10027943: RNCC: 3 | RNVC: 2

4 Apr 1996

5340-14-517-0865
Mounting Plate

145170865
101160601290: RNCC: 3 | RNVC: 2

3 Nov 1999

5340-14-526-9565
Mounting Bracket

145269565
10606054: RNCC: 3 | RNVC: 2

19 Sep 2001

5340-14-457-9744
Access Cover

144579744
20322805: RNCC: 3 | RNVC: 2
20322805: RNCC: 5 | RNVC: 9

2 Oct 1992

5340-14-369-9317
Clamping Catch

143699317
TH20A311: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-551-6038
Access Cover

145516038
3CW2056: RNCC: 3 | RNVC: 2

9 Oct 2006

5340-14-207-5959
Expansion Plug

142075959
6049327: RNCC: 3 | RNVC: 2
0604932700: RNCC: 5 | RNVC: 2

1 Jan 1964

5340-14-482-0909
Access Cover

144820909
22095799: RNCC: 3 | RNVC: 2
22095799: RNCC: 5 | RNVC: 9

20 Jun 1996

5340-14-550-9210
Angle Bracket

145509210
RA1B701874141N1: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-462-8842
Turnbuckle Body

144628842
010090811: RNCC: 3 | RNVC: 9
10090811: RNCC: 5 | RNVC: 2

5 May 1993

5340-14-516-4891
Mounting Bracket

145164891
0020486: RNCC: 3 | RNVC: 2

29 Sep 1999

5340-14-554-0739
Angle Bracket

145540739
483 077: RNCC: 3 | RNVC: 2
483 077: RNCC: 3 | RNVC: 2

8 Jun 2007

5340-14-399-9705
Angle Bracket

143999705
232566: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-512-5846
Mounting Bracket

145125846
3BM04704AAAA: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-361-2839
Webbing Strap

143612839
393895: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-448-4819
Bumper

144484819
5000923398: RNCC: 3 | RNVC: 2
5000924277: RNCC: 5 | RNVC: 2

26 Jun 1991

5340-14-341-7163
Angle Bracket

143417163
16397515: RNCC: 3 | RNVC: 2
16397515: RNCC: 3 | RNVC: 9

14 Apr 1977

5340-14-505-0269
Angle Bracket

145050269
5010376064: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-502-5339
Mounting Plate

145025339
5000806592: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-454-4896
Bumper

144544896
ZF04358105: RNCC: 3 | RNVC: 2
4358105: RNCC: 5 | RNVC: 2

2 Apr 1992

5340-14-522-3775
Mounting Plate

145223775
437683: RNCC: 3 | RNVC: 2

25 Oct 2000

5340-14-527-2680
Mounting Bracket

145272680
19203797: RNCC: 3 | RNVC: 2

17 Oct 2001

5340-14-523-5516
Swivel Caster

145235516
R101030B: RNCC: 3 | RNVC: 2

24 Jan 2001

5340-14-355-8971
Webbing Strap

143558971
120355: RNCC: 3 | RNVC: 2

5 Apr 1979

5340-14-276-4116
Bail Handle

142764116
C248514: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-502-5870
Anchor Strap

145025870
5001830631: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-501-0071
Mounting Bracket

145010071
10305620: RNCC: 3 | RNVC: 2
F300 0T 025 0365: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-306-2408
Rod End Clevis

143062408
26250201: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-390-0193
Access Cover

143900193
2308104910: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-14-508-4542
Access Cover

145084542
10457: RNCC: 3 | RNVC: 2

9 Sep 1998

5340-14-500-7296
Lock Bolt

145007296
10288875: RNCC: 3 | RNVC: 2
F300 0T 024 7491: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-308-9105
Mounting Plate

143089105
26255751: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-540-5263
Retaining Clip

145405263
19205518: RNCC: 3 | RNVC: 2

1 Apr 2004

5340-14-545-7328
Mounting Bracket

145457328
4661757A: RNCC: 3 | RNVC: 2

3 May 2005

5340-14-468-9899
Mounting Bracket

144689899
20322605: RNCC: 3 | RNVC: 2
20322605: RNCC: 5 | RNVC: 9

30 Mar 1994

5340-14-526-9716
Mounting Bracket

145269716
10572563: RNCC: 3 | RNVC: 2

19 Sep 2001

5340-14-547-7802
Mounting Bracket

145477802
5010650148: RNCC: 3 | RNVC: 2

12 Nov 2005

5340-14-208-9423
Access Cover

142089423
426025062: RNCC: 3 | RNVC: 9

1 Jan 1964

5340-14-381-2547
Anchor Strap

143812547
71449: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-540-1658
Mounting Bracket

145401658
BDSO02H6000: RNCC: 3 | RNVC: 2

11 Mar 2004

5340-14-297-1076
Anchor Strap

142971076
015-02-09: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-449-1428
Access Cover

144491428
BAZ9930: RNCC: 3 | RNVC: 2

31 Jul 1991

5340-14-489-4240
Mounting Plate

144894240
267785: RNCC: 3 | RNVC: 2
MOT0127000000: RNCC: 5 | RNVC: 2
267785: RNCC: 5 | RNVC: 2

21 Jul 1997

5340-14-328-7926
Access Cover

143287926
0177400010: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-402-8600
Utility Access Door

144028600
26071030100: RNCC: 3 | RNVC: 2
260710301: RNCC: 5 | RNVC: 9

19 Jul 1985

5340-14-321-6882
Access Cover

143216882
0235600010: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-473-7474
Utility Access Door

144737474
46060325: RNCC: 3 | RNVC: 2
46060325: RNCC: 5 | RNVC: 9

11 Jan 1995

5340-14-533-8095
Access Cover

145338095
8030598B00: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-542-3725
Access Cover

145423725
10624923: RNCC: 3 | RNVC: 2

8 Jul 2004

5340-14-296-9588
Rod End Clevis

142969588
3027810: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-381-2976
Retaining Strap

143812976
601606: RNCC: 3 | RNVC: 2
00601606: RNCC: 5 | RNVC: 2

25 Jan 1983

5340-14-266-1513
Bumper

142661513
C423241: RNCC: 3 | RNVC: 2
540274: RNCC: 5 | RNVC: 2
26423241: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-377-2187
Anchor Strap

143772187
219525: RNCC: 3 | RNVC: 2

17 May 1982

5340-14-319-4833
Bridge Clamp

143194833
DLT101334: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-461-1571
Mounting Bracket

144611571
SHS1C0209A: RNCC: 3 | RNVC: 2

24 Feb 1993

5340-14-458-8779
Blank Panel

144588779
29676537: RNCC: 3 | RNVC: 2

5 Nov 1992

5340-14-438-9602
Mounting Bracket

144389602
330A98-2043-22: RNCC: 3 | RNVC: 2

11 Apr 1990

5340-14-496-7115
Runner

144967115
NO PRIMARY REF14-496-7115: RNCC: 3 | RNVC: 2
78143161-002: RNCC: 5 | RNVC: 9
F300 0T 021 9461: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-464-9677
Angle Bracket

144649677
365A61-8230-3001: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-539-4150
Access Cover

145394150
788-09: RNCC: 3 | RNVC: 2

14 Jan 2004

5340-14-385-4531
Swivel Caster

143854531
HP6-LR-200-60R: RNCC: 3 | RNVC: 2
HP6LR200-60R: RNCC: 5 | RNVC: 2

26 Jul 1983

5340-14-551-5024
Angle Bracket

145515024
730010S100-22A: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-255-4252
Mounting Bracket

142554252
321A37-9707-00: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-485-0701
Mounting Bracket

144850701
332A52-1340-21: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-14-407-8263
Butt Hinge

144078263
121-1131-01-30 PC30: RNCC: 3 | RNVC: 2
121-1131-01-30: RNCC: 5 | RNVC: 2
85-692-7910: RNCC: 6 | RNVC: 9

5 Mar 1986

5340-14-490-2867
Mounting Plate

144902867
J05085-04-0300P002: RNCC: 3 | RNVC: 2

24 Sep 1997

5340-14-290-3068
Loop Clamp

142903068
330A61-3416-00: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-479-6812
Runner

144796812
11095D860102: RNCC: 3 | RNVC: 2

31 Jan 1996

5340-14-225-9981
Mending Plate

142259981
500096: RNCC: 3 | RNVC: 9

1 Jan 1966

5340-14-286-0630
Retaining Strap

142860630
9013-137: RNCC: 3 | RNVC: 2
9013-137: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-546-3723
Mounting Bracket

145463723
5010248544: RNCC: 3 | RNVC: 2

28 Jun 2005

5340-14-433-0247
Mounting Plate

144330247
401331E: RNCC: 3 | RNVC: 2

5 Jul 1989

5340-14-249-9291
Butt Hinge

142499291
99215: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-510-1197
Mounting Bracket

145101197
01M064: RNCC: 3 | RNVC: 2
1680AA8008464: RNCC: 6 | RNVC: 9
FC75-123-9-1-1110MM: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-329-6586
Loop Clamp

143296586
2001-920-0: RNCC: 3 | RNVC: 2
85-688-9312: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-350-1611
Strap Fastener Loop

143501611
MP2035P: RNCC: 3 | RNVC: 2
MP2035P: RNCC: 5 | RNVC: 9
8424: RNCC: 5 | RNVC: 9
85-689-1989: RNCC: 6 | RNVC: 9

14 Jun 1978

5340-14-334-8869
Loop Clamp

143348869
880-52-0-243-0: RNCC: 3 | RNVC: 2

2 Jun 1976

5340-14-405-0467
Mortise Lock Set

144050467
5064-40: RNCC: 3 | RNVC: 2

20 Nov 1985

5340-14-302-1220
Sliding Door Track

143021220
A10-21-490-81-0M1: RNCC: 3 | RNVC: 2
A10-21-490-81-0M1: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-425-7359
Block Clamp

144257359
91432B25D3D3BD3D3-25B104: RNCC: 3 | RNVC: 2

21 Jul 1988

5340-14-533-7953
Mounting Plate

145337953
168E612-00: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-484-5010
Access Cover

144845010
4-8911-120: RNCC: 3 | RNVC: 9

21 Nov 1996

5340-14-356-0382
Loop Clamp

143560382
E1101-15: RNCC: 3 | RNVC: 2
85-688-5286: RNCC: 6 | RNVC: 9

5 Apr 1979

5340-14-455-5955
Bow Handle

144555955
648-061-128: RNCC: 3 | RNVC: 2
91729136: RNCC: 5 | RNVC: 2
77092707: RNCC: 5 | RNVC: 2

28 May 1992

5340-14-361-7641
Mending Plate

143617641
M426-02117: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-364-6415
Angle Bracket

143646415
NO PRIMARY REF14-364-6415: RNCC: 3 | RNVC: 2
0-00-808: RNCC: 5 | RNVC: 9
15798: RNCC: 5 | RNVC: 9

2 Sep 1980

5340-14-315-3778
Clamp Bolt Assembly

143153778
S3SD18315-2: RNCC: 3 | RNVC: 2
S3SD18315-2: RNCC: 5 | RNVC: 2
V3SD18315-2: RNCC: 5 | RNVC: 2
85-695-3846: RNCC: 6 | RNVC: 9

1 Jan 1975

5340-14-392-5680
Shouldered Shaft

143925680
NO PRIMARY REF14-392-5680: RNCC: 3 | RNVC: 2
240300382: RNCC: 5 | RNVC: 9

21 Mar 1984

5340-14-230-7310
Handwheel

142307310
GSM137-001F14-9C1: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-444-9406
Dashpot

144449406
159G4-01: RNCC: 3 | RNVC: 2
96151238: RNCC: 5 | RNVC: 2

29 Jan 1991

5340-14-398-6749
Butt Hinge

143986749
583008-2: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-515-9826
Loop Clamp

145159826
312-18529-001: RNCC: 3 | RNVC: 2

1 Sep 1999

5340-14-462-2559
Access Cover

144622559
45431324: RNCC: 3 | RNVC: 2
45431324: RNCC: 3 | RNVC: 9

15 Apr 1993

5340-14-474-7435
Mounting Plate

144747435
39456713: RNCC: 3 | RNVC: 2
39456713: RNCC: 3 | RNVC: 9

1 Mar 1995

5340-14-031-1641
Access Cover

140311641
VDP4254: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-437-8189
Elastic Strap

144378189
4771622340: RNCC: 3 | RNVC: 2

21 Feb 1990

5340-14-434-9313
Angle Bracket

144349313
EL125: RNCC: 3 | RNVC: 9
17831BK: RNCC: 5 | RNVC: 9

10 Oct 1989

5340-14-484-6687
Retaining Strap

144846687
29444910: RNCC: 3 | RNVC: 2

28 Nov 1996

5340-14-518-7682
Retaining Clip

145187682
C713C1220201: RNCC: 3 | RNVC: 2
C713C1220201: RNCC: 5 | RNVC: 2

16 Feb 2000

5340-14-507-9343
Mounting Bracket

145079343
553198: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-471-9401
Mounting Bracket

144719401
C48413: RNCC: 3 | RNVC: 2

28 Sep 1994

5340-14-382-1586
Retaining Strap

143821586
383058F: RNCC: 3 | RNVC: 9
0008330047: RNCC: 5 | RNVC: 2
383058F: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-465-8830
Mounting Plate

144658830
5220400: RNCC: 3 | RNVC: 2

14 Oct 1993

5340-14-549-8523
Mounting Bracket

145498523
2092292: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-295-5017
Corner Brace

142955017
C53060: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-521-9385
Mounting Bracket

145219385
1099929A01: RNCC: 3 | RNVC: 2

27 Sep 2000

5340-14-546-7711
Angle Bracket

145467711
RA1M709315231N1: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-14-412-5266
Retaining Strap

144125266
218464: RNCC: 3 | RNVC: 2

15 Oct 1986

5340-14-376-4696
Loop Clamp

143764696
16559384: RNCC: 3 | RNVC: 2
16559384: RNCC: 5 | RNVC: 9
16559384: RNCC: 5 | RNVC: 9

28 Apr 1982

5340-14-254-7762
Retaining Strap

142547762
052236: RNCC: 3 | RNVC: 9
52236: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-272-8574
Mending Plate

142728574
9131714: RNCC: 3 | RNVC: 2
9131714: RNCC: 3 | RNVC: 9

1 Jan 1971

5340-14-462-7007
Buckle

144627007
168813: RNCC: 3 | RNVC: 2
89170367: RNCC: 5 | RNVC: 2

28 Apr 1993

5340-14-442-6282
Mounting Plate

144426282
TB3050710: RNCC: 3 | RNVC: 2
71236: RNCC: 5 | RNVC: 9

23 Oct 1990

5340-14-549-2937
Blank Panel

145492937
MC1259A00: RNCC: 3 | RNVC: 2

20 Mar 2006

5340-14-409-3316
Bumper

144093316
30312025MAA: RNCC: 3 | RNVC: 2

28 May 1986

5340-14-423-0482
Mounting Bracket

144230482
721100643: RNCC: 3 | RNVC: 2
89174165: RNCC: 5 | RNVC: 2
721100643: RNCC: 5 | RNVC: 9

31 Mar 1988

5340-14-555-7277
Corner Brace

145557277
0301020900: RNCC: 3 | RNVC: 2

11 Dec 2007

5340-14-385-8866
Mounting Plate

143858866
59991: RNCC: 3 | RNVC: 9

24 Aug 1983

5340-14-454-9862
Rod End Connector

144549862
1720-83/0194-3: RNCC: 3 | RNVC: 2

1 May 1992

5340-14-326-2045
Access Cover

143262045
J00650-01-0400P004: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-254-3929
Bumper

142543929
511251: RNCC: 3 | RNVC: 2
91259119: RNCC: 5 | RNVC: 2
00414-49: RNCC: 5 | RNVC: 2
D00414-49: RNCC: 5 | RNVC: 2
071259001000004: RNCC: 5 | RNVC: 2
BFC20734: RNCC: 5 | RNVC: 2
726523: RNCC: 5 | RNVC: 9
MB13118BIS: RNCC: 5 | RNVC: 9

1 Jan 1969

5340-14-331-0171
Access Cover

143310171
T20-13C238: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-466-9980
Bow Handle

144669980
76991-69: RNCC: 3 | RNVC: 2

14 Dec 1993

5340-14-364-6105
Loop Clamp

143646105
5000498278: RNCC: 3 | RNVC: 2
5000498278: RNCC: 5 | RNVC: 9

2 Sep 1980

5340-14-305-3658
Threaded Rod End

143053658
557959: RNCC: 3 | RNVC: 2
557959: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-422-7531
Loop Clamp

144227531
8AX200DP239: RNCC: 3 | RNVC: 2
91599774: RNCC: 5 | RNVC: 2
9560146780: RNCC: 5 | RNVC: 2

17 Mar 1988

5340-14-321-6714
Synchro Clamp

143216714
0235557050: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-446-7159
Angle Bracket

144467159
39958462: RNCC: 3 | RNVC: 2
39958462: RNCC: 5 | RNVC: 9

9 Apr 1991

5340-14-500-0235
Mounting Bracket

145000235
262436: RNCC: 3 | RNVC: 2
F300 0T 024 0205: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-451-5406
Protection Bellows

144515406
1053200066: RNCC: 3 | RNVC: 2
91713724: RNCC: 5 | RNVC: 2
DAH1053200066: RNCC: 5 | RNVC: 9

21 Nov 1991

5340-14-545-8619
Mounting Bracket

145458619
5010631020: RNCC: 3 | RNVC: 2

21 May 2005

5340-14-554-6451
Access Cover

145546451
0064580180: RNCC: 3 | RNVC: 2

31 Jul 2007

5340-14-332-9044
Angle Bracket

143329044
193536: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-453-4403
Access Cover

144534403
559872: RNCC: 3 | RNVC: 2

19 Feb 1992

5340-14-482-1016
Angle Bracket

144821016
22533298: RNCC: 3 | RNVC: 2
22533298: RNCC: 5 | RNVC: 9

20 Jun 1996

5340-14-483-6889
Loop Clamp

144836889
F120087: RNCC: 3 | RNVC: 2
F300 0T 019 4160: RNCC: 6 | RNVC: 9

27 Sep 1996

5340-14-526-9624
Access Cover

145269624
10605252: RNCC: 3 | RNVC: 2

19 Sep 2001

5340-14-401-5233
Plug Button

144015233
40501: RNCC: 3 | RNVC: 2

13 Jun 1985

5340-14-479-6932
Doorstop

144796932
700533: RNCC: 3 | RNVC: 2

31 Jan 1996

5340-14-508-7488
Clamping Catch

145087488
564053G0001: RNCC: 3 | RNVC: 2

30 Sep 1998

5340-14-472-4947
Mounting Bracket

144724947
611321406: RNCC: 3 | RNVC: 2

26 Oct 1994

5340-14-374-0489
Angle Bracket

143740489
227251: RNCC: 3 | RNVC: 2

8 Dec 1981

5340-14-455-8986
Pipe Hanger

144558986
PM1A526164030: RNCC: 3 | RNVC: 2
PM1A526164030: RNCC: 5 | RNVC: 2

11 Jun 1992

5340-14-546-2958
Bumper

145462958
10477290: RNCC: 3 | RNVC: 2

22 Jun 2005

5340-14-530-6854
Cover Strip

145306854
T524A2001505: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-14-479-6779
Runner

144796779
11095D430410: RNCC: 3 | RNVC: 2

31 Jan 1996

5340-14-041-9524
Angle Bracket

140419524
0260603550: RNCC: 3 | RNVC: 2

24 Jul 1976

5340-14-530-6855
Cover Strip

145306855
T524A2001532: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-14-441-7657
Angle Bracket

144417657
007727080P: RNCC: 3 | RNVC: 2

18 Sep 1990

5340-14-382-5655
Access Cover

143825655
16497235: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-14-479-6139
Loop Clamp

144796139
514119050255: RNCC: 3 | RNVC: 2
381902501: RNCC: 5 | RNVC: 2
38PT25: RNCC: 5 | RNVC: 2

24 Jan 1996

5340-14-544-0635
Mounting Plate

145440635
AMPC ENER E227331: RNCC: 3 | RNVC: 2

25 Dec 2004

5340-14-452-3811
Block Clamp

144523811
10211556018: RNCC: 3 | RNVC: 2

8 Jan 1992

5340-14-326-9129
Retaining Strap

143269129
6003NI: RNCC: 3 | RNVC: 9
99001409: RNCC: 5 | RNVC: 2
6003NI: RNCC: 5 | RNVC: 9

17 Dec 1997

5340-14-528-8775
Bail Handle

145288775
TS183816Y00: RNCC: 3 | RNVC: 2

20 Feb 2002

5340-14-420-7272
Rod End Clevis

144207272
551294: RNCC: 3 | RNVC: 2

16 Dec 1987

5340-14-539-1565
Metal Grille

145391565
1AB016000012: RNCC: 3 | RNVC: 2

9 Dec 2003

5340-14-417-5452
Mounting Plate

144175452
4679A419REP12: RNCC: 3 | RNVC: 2
589014: RNCC: 5 | RNVC: 2

8 Jul 1987

5340-14-516-6454
Expansion Plug

145166454
P96452A: RNCC: 3 | RNVC: 2

8 Oct 1999

5340-14-530-2429
Support Hook

145302429
TB1030920: RNCC: 3 | RNVC: 2

22 May 2002

5340-14-551-3477
Angle Bracket

145513477
RA1M702206011: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-537-9299
Bow Handle

145379299
56940291AA: RNCC: 3 | RNVC: 2

8 Dec 2003

5340-14-484-2569
Mounting Bracket

144842569
502-712-199-0: RNCC: 3 | RNVC: 2

31 Oct 1996

5340-14-414-5390
Access Cover

144145390
NO PRIMARY REF14-414-5390: RNCC: 3 | RNVC: 2
853708: RNCC: 5 | RNVC: 9

11 Feb 1987

5340-14-403-2300
Rod End Clevis

144032300
437-03-011: RNCC: 3 | RNVC: 2

31 Jul 1985

5340-14-473-1113
Synchro Clamp

144731113
20699-04: RNCC: 3 | RNVC: 9
1082204C00: RNCC: 5 | RNVC: 2

7 Dec 1994

5340-14-537-7457
Loop Clamp

145377457
NSA5536-24: RNCC: 1 | RNVC: 2
HP24N: RNCC: 3 | RNVC: 2

19 Nov 2003

5340-14-411-7116
Anchor Strap

144117116
NO PRIMARY REF14-411-7116: RNCC: 3 | RNVC: 2
D10-46944: RNCC: 5 | RNVC: 9

27 Aug 1986

5340-14-455-4363
Runner

144554363
2327-12-00: RNCC: 3 | RNVC: 2
2327-12-00: RNCC: 5 | RNVC: 2
91632533: RNCC: 5 | RNVC: 2
5000816393: RNCC: 5 | RNVC: 2
89233047: RNCC: 5 | RNVC: 2

21 May 1992

5340-14-351-7251
Retaining Strap

143517251
650-403-263-0: RNCC: 3 | RNVC: 2

12 Sep 1978

5340-14-549-5379
Access Cover

145495379
MC201-215552-00: RNCC: 3 | RNVC: 2

13 Apr 2006

5340-14-332-6523
Bow Handle

143326523
211C0-0009DETB: RNCC: 3 | RNVC: 2
211C0-009DETB: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-031-7505
Mending Plate

140317505
330A58-6003-37: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-332-0889
Retaining Strap

143320889
8500-2401: RNCC: 3 | RNVC: 2
8500-409: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-362-1056
Rod End Clevis

143621056
GSM522-049F12: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-485-3449
Synchro Clamp

144853449
ACMH151-104-36: RNCC: 3 | RNVC: 9

16 Jan 1997

5340-14-474-7570
Bridge Clamp

144747570
AESUFR7701-115A: RNCC: 3 | RNVC: 2
85-691-6451: RNCC: 6 | RNVC: 9

1 Mar 1995

5340-14-303-4993
Mending Plate

143034993
NO PRIMARY REF14-303-4993: RNCC: 3 | RNVC: 2
48-23-10-246: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-537-2397
Lock Bolt

145372397
P1-915489: RNCC: 3 | RNVC: 2

15 Oct 2003

5340-14-389-6208
Runner

143896208
M13-14: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-406-2411
Anchor Strap

144062411
9027-02: RNCC: 3 | RNVC: 2
7386660020: RNCC: 5 | RNVC: 2

8 Jan 1986

5340-14-279-8449
Handle Grip

142798449
77329-47BIS: RNCC: 3 | RNVC: 2
77329-47ABIS: RNCC: 5 | RNVC: 2
85-689-1214: RNCC: 6 | RNVC: 9

1 Jan 1971

5340-14-399-6902
Retaining Strap

143996902
510-0000-106: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-518-3889
Pipe Hanger

145183889
355A75-1360-00: RNCC: 3 | RNVC: 2

2 Feb 2000

5340-14-361-4868
Synchro Clamp

143614868
0249158450: RNCC: 3 | RNVC: 2
85-689-7221: RNCC: 6 | RNVC: 9

24 Jan 1980

5340-14-357-6544
Bumper

143576544
NO PRIMARY REF14-357-6544: RNCC: 3 | RNVC: 2
12-39-12-361: RNCC: 5 | RNVC: 9

27 Jun 1979

5340-14-359-6541
Loop Clamp

143596541
NO PRIMARY REF14-359-6541: RNCC: 3 | RNVC: 2
1516076: RNCC: 5 | RNVC: 9

15 Oct 1979

5340-14-363-0935
Bail Handle

143630935
PX399ABR: RNCC: 3 | RNVC: 2
PX-399A-BR: RNCC: 5 | RNVC: 2
BJM00625: RNCC: 5 | RNVC: 2

3 Apr 1980

5340-14-495-6477
Access Cover

144956477
V43233-98: RNCC: 3 | RNVC: 2
F300 0T 019 5757: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-503-2846
Mounting Bracket

145032846
332P68-1512-21: RNCC: 3 | RNVC: 2

7 Jan 1998

5340-14-510-0687
Bridge Clamp

145100687
NO PRIMARY REF14-510-0687: RNCC: 3 | RNVC: 2
1-077-100-16: RNCC: 5 | RNVC: 9
5340AA2075171: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-422-7244
Mounting Bracket

144227244
0294208310: RNCC: 3 | RNVC: 2
302-283-902-0: RNCC: 5 | RNVC: 2

17 Mar 1988

5340-14-384-3185
Loop Clamp

143843185
92831201: RNCC: 3 | RNVC: 2
9-28GE20: RNCC: 5 | RNVC: 2

4 May 1983

5340-14-281-2594
Rod End Clevis

142812594
121E26-725-02-0: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-530-4461
Loop Clamp Kit

145304461
2792: RNCC: 3 | RNVC: 2

12 Jun 2002

5340-14-340-2485
Angle Bracket

143402485
210515: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-501-0892
Mounting Bracket

145010892
189337220: RNCC: 3 | RNVC: 9
F300 0T 025 1234: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-399-5029
Access Cover

143995029
15135355: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-541-5860
Access Cover

145415860
735990: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-555-9977
Mounting Bracket

145559977
0319734270: RNCC: 3 | RNVC: 2

21 Jan 2008

5340-14-509-7451
Plug Button

145097451
56089551: RNCC: 3 | RNVC: 2

4 Nov 1998

5340-14-382-2245
Rod End Clevis

143822245
2474-17: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-527-9257
Bumper

145279257
330A58-4239-20: RNCC: 3 | RNVC: 2

28 Nov 2001

5340-14-314-3775
Luggage Handle

143143775
15891-300300: RNCC: 3 | RNVC: 2
19792-300111: RNCC: 5 | RNVC: 2
BJZ000030000: RNCC: 5 | RNVC: 2
1972-300111: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-509-9267
Runner

145099267
NO PRIMARY REF14-509-9267: RNCC: 3 | RNVC: 2
5013TM346L1212: RNCC: 5 | RNVC: 9
5340AA1109455: RNCC: 6 | RNVC: 9

4 Nov 1998

5340-14-501-2621
Handwheel

145012621
579-053: RNCC: 3 | RNVC: 2
579.053: RNCC: 3 | RNVC: 2
F300 0T 025 3027: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-488-7001
Rigid Caster

144887001
518-5125BRPF: RNCC: 3 | RNVC: 9
5085131: RNCC: 5 | RNVC: 9
518-5131: RNCC: 5 | RNVC: 9
N508-3125BR: RNCC: 5 | RNVC: 9
MPR518-5125BRPF: RNCC: 5 | RNVC: 9

28 May 1997

5340-14-417-5771
Rigid Caster

144175771
4727322-03: RNCC: 3 | RNVC: 2

15 Jul 1987

5340-14-433-1900
Threaded Rod End

144331900
8030-310-146C: RNCC: 3 | RNVC: 2

11 Jul 1989

5340-14-360-6514
Access Cover

143606514
NO PRIMARY REF14-360-6514: RNCC: 3 | RNVC: 2
350382: RNCC: 5 | RNVC: 9

19 Dec 1979

5340-14-508-7771
Access Cover

145087771
BS2552.61.00.008: RNCC: 3 | RNVC: 2
BS2552-61-00-008: RNCC: 5 | RNVC: 9

30 Sep 1998

5340-14-501-1549
Mounting Bracket

145011549
014.014.259: RNCC: 3 | RNVC: 2
014-014-259: RNCC: 3 | RNVC: 2
F300 0T 025 1951: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-298-8273
Snap Hook

142988273
22201-022: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-353-4073
Bumper

143534073
512056VARIANTE85-2: RNCC: 3 | RNVC: 2
197-02-01-06-22: RNCC: 3 | RNVC: 2
65-1-34-101: RNCC: 5 | RNVC: 2
197-02-01-02-20: RNCC: 5 | RNVC: 2
197-02-01-06-20: RNCC: 5 | RNVC: 2

8 Dec 1978

5340-14-465-7240
Protection Bellows

144657240
91ABC20.00REP20/39: RNCC: 3 | RNVC: 2

12 Oct 1993

5340-14-241-1729
Mounting Bracket

142411729
STF156289G: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-512-7353
Mounting Bracket

145127353
800039718: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-530-6916
Angle Bracket

145306916
T533A1002108: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-14-450-4147
Angle Bracket

144504147
616658: RNCC: 3 | RNVC: 2

7 Oct 1991

5340-14-506-6925
Protection Bellows

145066925
HYP1607: RNCC: 3 | RNVC: 2
10486998: RNCC: 3 | RNVC: 2

6 May 1998

5340-14-460-0782
Plate Spacer

144600782
PM1A725534005: RNCC: 3 | RNVC: 2
PM1A725534005: RNCC: 5 | RNVC: 2

7 Jan 1993

5340-14-418-9120
Butt Hinge

144189120
CA427IP: RNCC: 3 | RNVC: 2

16 Sep 1987

5340-14-535-0636
Angle Bracket

145350636
02000058: RNCC: 3 | RNVC: 2

30 Apr 2003

5340-14-542-3297
Loop Holder

145423297
OSSAT90834B00: RNCC: 3 | RNVC: 2

8 Jul 2004

5340-14-440-1510
Metal Grille

144401510
LSA44B365: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-14-466-1360
Bumper

144661360
5220113: RNCC: 3 | RNVC: 2

27 Oct 1993

5340-14-544-7425
Mounting Plate

145447425
61033305AA: RNCC: 3 | RNVC: 2

22 Feb 2005

5340-14-531-1467
Detent Plunger

145311467
TB3020108F431: RNCC: 3 | RNVC: 2

24 Jul 2002

5340-14-537-5247
Access Cover

145375247
6501OEC110: RNCC: 3 | RNVC: 2
6501OEC110000: RNCC: 5 | RNVC: 2

3 Nov 2003

5340-14-313-7470
Access Cover

143137470
0064770380: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-354-7550
Retaining Strap

143547550
150460: RNCC: 3 | RNVC: 2

20 Feb 1979

5340-14-375-8839
Anchor Strap

143758839
104083020: RNCC: 3 | RNVC: 2
104083020: RNCC: 5 | RNVC: 2

30 Mar 1982

5340-14-384-7234
Access Cover

143847234
16497592: RNCC: 3 | RNVC: 2

2 Jun 1983

5340-14-528-8756
Mounting Plate

145288756
TS140436: RNCC: 3 | RNVC: 2

20 Feb 2002

5340-14-245-1551
Anchor Strap

142451551
70483500: RNCC: 3 | RNVC: 2
483500: RNCC: 5 | RNVC: 9
70483500: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-308-8757
Access Cover

143088757
711012: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-305-2492
Access Cover

143052492
TH20N207: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-438-7809
Mounting Plate

144387809
89051098: RNCC: 3 | RNVC: 2

4 Apr 1990

5340-14-364-5772
Anchor Strap

143645772
5403598L: RNCC: 3 | RNVC: 2

2 Sep 1980

5340-14-516-7520
Access Cover

145167520
4644508A: RNCC: 3 | RNVC: 2

13 Oct 1999

5340-14-553-8438
Access Cover

145538438
13001962001: RNCC: 3 | RNVC: 2

23 May 2007

5340-14-518-9257
Mounting Bracket

145189257
471620790: RNCC: 3 | RNVC: 2

29 Feb 2000

5340-14-329-4213
Access Cover

143294213
0072870200: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-513-3835
Mounting Bracket

145133835
DE33135: RNCC: 3 | RNVC: 2

17 Mar 1999

5340-14-307-0398
Access Cover

143070398
181854: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-345-2416
Rod End Clevis

143452416
A11A722214132: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-551-9813
Mounting Bracket

145519813
10599882: RNCC: 3 | RNVC: 2

15 Nov 2006

5340-14-292-5557
Angle Bracket

142925557
121E26-800-52-0: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-425-3535
Loop Clamp

144253535
50011-1-12: RNCC: 3 | RNVC: 2
NSA935807-12: RNCC: 5 | RNVC: 2
50011-1-12: RNCC: 5 | RNVC: 9

30 Jun 1988

5340-14-460-0414
Handle Grip

144600414
JVCIT02-08: RNCC: 3 | RNVC: 2
89411416: RNCC: 5 | RNVC: 2

7 Jan 1993

5340-14-471-2654
Mounting Bracket

144712654
8-0504ZZ: RNCC: 3 | RNVC: 2
131206: RNCC: 5 | RNVC: 2

10 Aug 1994

5340-14-509-7068
Mounting Bracket

145097068
399-002-222-0: RNCC: 3 | RNVC: 2

28 Oct 1998

5340-14-303-2048
Loop Clamp

143032048
A10-52-350-19-0: RNCC: 3 | RNVC: 2
A10-52-350-19-0: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-551-3086
Mounting Plate

145513086
1502009-CFRA: RNCC: 3 | RNVC: 2
1502009-CFRA: RNCC: 5 | RNVC: 2

11 Sep 2006

5340-14-472-4543
Mounting Bracket

144724543
DXX1112: RNCC: 3 | RNVC: 2

26 Oct 1994

5340-14-351-9422
Loop Clamp

143519422
32161-367-690: RNCC: 3 | RNVC: 2
32161-367-690: RNCC: 5 | RNVC: 2

16 Oct 1978

5340-14-457-6607
Webbing Strap

144576607
B3000-CAT5-LG2M: RNCC: 3 | RNVC: 2

10 Sep 1992

5340-14-436-2758
Mending Plate

144362758
551477: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-14-455-9010
Angle Bracket

144559010
PM1A716070352: RNCC: 3 | RNVC: 2
PM1A716070352: RNCC: 5 | RNVC: 2

11 Jun 1992

5340-14-505-0531
Access Cover

145050531
5010120900: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-318-8557
Access Cover

143188557
0000567936: RNCC: 3 | RNVC: 2
0000567936: RNCC: 5 | RNVC: 9
567936: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-479-5135
Mounting Bracket

144795135
23627899-4: RNCC: 3 | RNVC: 2

17 Jan 1996

5340-14-457-1522
Access Cover

144571522
16017650P: RNCC: 3 | RNVC: 2
T20362: RNCC: 5 | RNVC: 2

13 Aug 1992

5340-14-407-9592
Access Cover

144079592
16773612: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-14-461-3840
Mounting Bracket

144613840
231652V: RNCC: 3 | RNVC: 2

10 Mar 1993

5340-14-445-1382
Loop Clamp

144451382
0860780E01: RNCC: 1 | RNVC: 2
203405-1: RNCC: 3 | RNVC: 2

4 Feb 1991

5340-14-386-9192
Screw Hook

143869192
5340CKG0NDVISB0ISAC2-5X25: RNCC: 2 | RNVC: 2

24 Aug 1983

5340-14-433-0246
Mounting Plate

144330246
401330D: RNCC: 3 | RNVC: 2

5 Jul 1989

5340-14-320-1477
Detent Plunger

143201477
12-19-59-1: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-389-5411
Bumper

143895411
365A84-5000-20: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-032-1012
Angle Bracket

140321012
341A61-2070-24: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-363-8949
Bow Handle

143638949
NO PRIMARY REF14-363-8949: RNCC: 3 | RNVC: 2
Z46870: RNCC: 5 | RNVC: 9

7 Aug 1980

5340-14-463-6340
Lock-Release Lever

144636340
050A54-642541Y: RNCC: 3 | RNVC: 2
0642541Y00: RNCC: 5 | RNVC: 2

23 Jun 1993

5340-14-511-6225
Clamp Bolt Assembly

145116225
S3SD18135-55: RNCC: 3 | RNVC: 2
S3SD18135-55: RNCC: 5 | RNVC: 2

6 Jan 1999

5340-14-365-1932
Vent Plug

143651932
043-04-02-004: RNCC: 3 | RNVC: 2

19 Sep 1980

5340-14-496-9165
Mounting Bracket

144969165
490127-32029-01: RNCC: 3 | RNVC: 2
F300 0T 022 2662: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-534-1270
Mounting Bracket

145341270
332P65-1181-00: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-446-0223
Mounting Plate

144460223
084-45-014-01: RNCC: 3 | RNVC: 2

4 Mar 1991

5340-14-442-0365
Mounting Plate

144420365
332A96-3115-25: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-14-437-9521
Synchro Clamp

144379521
330A87-2523-20: RNCC: 3 | RNVC: 2

28 Feb 1990

5340-14-385-7754
Handwheel

143857754
D083031: RNCC: 3 | RNVC: 2
D83-31: RNCC: 5 | RNVC: 2

26 Jul 1983

5340-14-551-7150
Mounting Bracket

145517150
330A23-2068-20: RNCC: 3 | RNVC: 2

18 Oct 2006

5340-14-531-8585
Mounting Plate

145318585
19A4305-10: RNCC: 3 | RNVC: 2

23 Sep 2002

5340-14-511-2132
Access Cover

145112132
9040-500-006A: RNCC: 3 | RNVC: 2

9 Dec 1998

5340-14-292-4507
Mounting Bracket

142924507
341A61-1316-20: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-394-2285
Handwheel

143942285
AS525-14: RNCC: 3 | RNVC: 2

23 Jun 1984

5340-14-473-4107
Angle Bracket

144734107
332A76-2125-20: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-14-281-5533
Angle Bracket

142815533
STM1-156648E: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-485-9162
Mounting Bracket

144859162
332A84-1046-20: RNCC: 3 | RNVC: 2

19 Feb 1997

5340-14-541-6273
Utility Access Door

145416273
1091028-001: RNCC: 3 | RNVC: 2

15 Jun 2004

5340-14-498-1660
Mounting Bracket

144981660
330A87-2530-2001: RNCC: 3 | RNVC: 2
91912709: RNCC: 5 | RNVC: 9
F300 0T 004 4137: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-423-8196
Loop Clamp

144238196
R19-17: RNCC: 3 | RNVC: 2

28 Apr 1988

5340-14-303-5035
Retaining Clip

143035035
NO PRIMARY REF14-303-5035: RNCC: 3 | RNVC: 2
48-23-30-216: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-389-2173
Bumper

143892173
DHE5-010007: RNCC: 3 | RNVC: 2
85-692-3917: RNCC: 6 | RNVC: 9

29 Nov 1983

5340-14-451-0184
Loop Clamp

144510184
30-004164: RNCC: 3 | RNVC: 2

28 Oct 1991

5340-14-286-4743
Mounting Bracket

142864743
341A24-1023-20: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-471-2607
Anchor Strap

144712607
NO PRIMARY REF14-471-2607: RNCC: 3 | RNVC: 2
709883-100: RNCC: 5 | RNVC: 9

10 Aug 1994

5340-14-550-4203
Mounting Plate

145504203
2714702780: RNCC: 3 | RNVC: 2

20 Jun 2006

5340-14-461-4421
Rod End Clevis

144614421
262-12-23087-02: RNCC: 3 | RNVC: 2
85-694-5687: RNCC: 6 | RNVC: 9

10 Mar 1993

5340-14-490-3021
Mounting Bracket

144903021
A02332-02-1100P002: RNCC: 3 | RNVC: 2

24 Sep 1997

5340-14-213-1621
Lock-Release Lever

142131621
T863-56M1P155A: RNCC: 3 | RNVC: 2
T86356M1P155: RNCC: 5 | RNVC: 2

1 Jan 1964

5340-14-304-3417
T Plate

143043417
330A21-2246-20: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-550-3916
Webbing Strap

145503916
01155-1-EC-600: RNCC: 3 | RNVC: 2

19 Jun 2006

5340-14-331-7220
Anchor Strap

143317220
121S94-252-08-0: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-516-0009
Rod End Clevis

145160009
309-128-603-0: RNCC: 3 | RNVC: 2
309-128-602-0: RNCC: 5 | RNVC: 2

1 Sep 1999

5340-14-260-3019
Slide Keeper

142603019
218583-0: RNCC: 3 | RNVC: 2
152929: RNCC: 3 | RNVC: 2
2136E: RNCC: 5 | RNVC: 2
AP57: RNCC: 5 | RNVC: 2
2136: RNCC: 5 | RNVC: 2
2136B: RNCC: 5 | RNVC: 2
2136B: RNCC: 5 | RNVC: 9
2136: RNCC: 5 | RNVC: 9
85-686-1458: RNCC: 6 | RNVC: 9

1 Jan 1970

5340-14-511-6465
Mounting Bracket

145116465
1-625-08-13: RNCC: 3 | RNVC: 2

6 Jan 1999

5340-14-539-2464
Angle Bracket

145392464
21243924-00: RNCC: 3 | RNVC: 2
21243924-5: RNCC: 5 | RNVC: 2

17 Dec 2003

5340-14-310-6927
Snap Hook

143106927
4220-100-302: RNCC: 3 | RNVC: 2
4220-100-31: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-549-4781
Mounting Plate

145494781
2004/12 EATSEA/BVM REP 2 ET 3: RNCC: 3 | RNVC: 2

7 Apr 2006

5340-14-549-8626
Access Cover

145498626
2092428-001: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-435-8301
Butt Hinge

144358301
332A41-2505-22: RNCC: 3 | RNVC: 2

22 Nov 1989

5340-14-449-8299
Angle Bracket

144498299
993-03-20: RNCC: 3 | RNVC: 2

11 Sep 1991

5340-14-399-0241
Access Cover

143990241
NO PRIMARY REF14-399-0241: RNCC: 3 | RNVC: 2
23723: RNCC: 5 | RNVC: 9
D40-23723: RNCC: 5 | RNVC: 9

6 Mar 1985

Load More Results