What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 95 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 95 of 446

5340-14-500-9105
Mounting Plate

145009105
E66502120002: RNCC: 3 | RNVC: 2
F300 0T 024 9313: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-426-2942
Clamping Catch

144262942
4CR104ZB: RNCC: 3 | RNVC: 2
0060566R00: RNCC: 5 | RNVC: 2
1560: RNCC: 5 | RNVC: 2
LH91225: RNCC: 5 | RNVC: 2

18 Aug 1988

5340-14-525-2011
Loop Clamp

145252011
14410046T: RNCC: 3 | RNVC: 2
06310P127011: RNCC: 3 | RNVC: 2

23 May 2001

5340-14-457-7818
Bridge Clamp

144577818
TLB002044000101: RNCC: 3 | RNVC: 2

22 Sep 1992

5340-14-548-3988
Loop Clamp

145483988
EN4114F18WR1: RNCC: 2 | RNVC: 2

12 Jan 2006

5340-14-352-0470
Loop Clamp

143520470
51413119009: RNCC: 3 | RNVC: 2
28G9: RNCC: 5 | RNVC: 2

16 Oct 1978

5340-14-457-9331
Angle Bracket

144579331
7700572374: RNCC: 3 | RNVC: 2

2 Oct 1992

5340-14-480-1818
Lock Bolt

144801818
VXP.1051.IB: RNCC: 3 | RNVC: 2
LIAT00010: RNCC: 5 | RNVC: 2

26 Feb 1996

5340-14-503-9746
Mounting Bracket

145039746
PONTE93698A00: RNCC: 3 | RNVC: 2

4 Feb 1998

5340-14-551-2580
Angle Bracket

145512580
RA1M210817211A1: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-515-4216
Loop Clamp

145154216
41610043A: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-388-8079
Webbing Strap

143888079
005392557P: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-429-1204
Loop Clamp

144291204
PA320: RNCC: 3 | RNVC: 2
PLC3662: RNCC: 5 | RNVC: 2

11 Jan 1989

5340-14-554-9413
Loop Clamp

145549413
78651DH19AG: RNCC: 1 | RNVC: 2
78651DH19AG: RNCC: 3 | RNVC: 2

11 Sep 2007

5340-14-513-7430
Shelf Bracket

145137430
L15165: RNCC: 3 | RNVC: 2
L15165: RNCC: 5 | RNVC: 2
RAQ0512: RNCC: 5 | RNVC: 2

9 Apr 1999

5340-14-379-0000
Tubular Fairlead

143790000
68346: RNCC: 3 | RNVC: 2
91456064: RNCC: 5 | RNVC: 2
91461364: RNCC: 5 | RNVC: 2
91456064: RNCC: 5 | RNVC: 2
91461364: RNCC: 5 | RNVC: 2
068346: RNCC: 5 | RNVC: 9

6 Sep 1982

5340-14-411-4120
Cover Strip

144114120
MY2055217523G01: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-501-6085
Mounting Bracket

145016085
45673924: RNCC: 3 | RNVC: 2
45673924: RNCC: 5 | RNVC: 9
F300 0T 025 1247: RNCC: 6 | RNVC: 9

5 Nov 1997

5340-14-461-2911
Block Clamp

144612911
5000654526: RNCC: 3 | RNVC: 2
89287497: RNCC: 5 | RNVC: 2

3 Mar 1993

5340-14-523-6282
Mounting Plate

145236282
A2551551: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-14-532-1256
Mounting Plate

145321256
5000499691: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-14-542-9770
Shelf Bracket

145429770
T257A4007108: RNCC: 3 | RNVC: 2

18 Aug 2004

5340-14-532-6781
Butt Hinge

145326781
19222771: RNCC: 3 | RNVC: 2

27 Nov 2002

5340-14-292-2438
Angle Bracket

142922438
0264208190: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-549-0688
Cable Retractor

145490688
9428PHC160: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-425-1130
Shimmy Damper

144251130
0806526S01: RNCC: 3 | RNVC: 2

21 Jun 1988

5340-14-530-6878
Cover Strip

145306878
T524A2001530: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-14-370-9924
Runner

143709924
20232699: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-439-6918
Mounting Plate

144396918
16558120: RNCC: 3 | RNVC: 2
16558120: RNCC: 5 | RNVC: 9

16 May 1990

5340-14-404-2537
Angle Bracket

144042537
XMJZ06: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-460-0136
Angle Bracket

144600136
39449881: RNCC: 3 | RNVC: 2
39449881: RNCC: 5 | RNVC: 9

7 Jan 1993

5340-14-422-5720
Angle Bracket

144225720
4772123610: RNCC: 3 | RNVC: 2

10 Mar 1988

5340-14-375-7905
Retaining Band

143757905
0000578733: RNCC: 3 | RNVC: 2
578733: RNCC: 5 | RNVC: 9

26 Feb 1982

5340-14-426-1292
Mounting Plate

144261292
39533125: RNCC: 3 | RNVC: 2
39533125: RNCC: 5 | RNVC: 9

4 Aug 1988

5340-14-347-3173
Mending Plate

143473173
1060970060: RNCC: 3 | RNVC: 2
1060970060: RNCC: 5 | RNVC: 2

19 Jan 1978

5340-14-408-0965
Access Cover

144080965
39216247: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-14-361-2836
Webbing Strap

143612836
397937: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-459-7284
Cover Strip

144597284
LN321022REP4JAG3: RNCC: 3 | RNVC: 2
RAB0160: RNCC: 5 | RNVC: 2

15 Dec 1992

5340-14-425-0485
Access Cover

144250485
39403318: RNCC: 3 | RNVC: 2

16 Jun 1988

5340-14-502-8005
Mounting Bracket

145028005
8C8836: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-529-9569
Runner

145299569
1097154Y00: RNCC: 3 | RNVC: 2

24 Apr 2002

5340-14-429-9470
Access Cover

144299470
000200322000: RNCC: 3 | RNVC: 2

20 Feb 1989

5340-14-502-8019
Anchor Strap

145028019
8K6211: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-542-2989
Mounting Bracket

145422989
962580508: RNCC: 3 | RNVC: 2
962580508: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-493-4744
Mounting Bracket

144934744
ST406M42G54: RNCC: 3 | RNVC: 2
F300 0T 013 1543: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-404-5192
Mounting Plate

144045192
326598: RNCC: 3 | RNVC: 2
326598: RNCC: 5 | RNVC: 9

20 Nov 1985

5340-14-406-0782
Angle Bracket

144060782
313443: RNCC: 3 | RNVC: 2
8210300: RNCC: 5 | RNVC: 2

8 Jan 1986

5340-14-414-2991
Rod End Clevis

144142991
36135BC32A55L: RNCC: 2 | RNVC: 2

28 Jan 1987

5340-14-483-0450
Access Cover

144830450
ALZ126551910020: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-418-4974
Anchor Strap

144184974
4771903520: RNCC: 3 | RNVC: 2

26 Aug 1987

5340-14-521-0240
Access Cover

145210240
T51182010500: RNCC: 3 | RNVC: 2
T51182010500: RNCC: 5 | RNVC: 2

29 Jun 2000

5340-14-456-1434
Access Cover

144561434
5000280443: RNCC: 3 | RNVC: 2

18 Jun 1992

5340-14-433-6138
Access Cover

144336138
8816473000: RNCC: 3 | RNVC: 2
89415983: RNCC: 5 | RNVC: 2

2 Aug 1989

5340-14-512-7474
Plug Button

145127474
800033753: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-378-9952
Access Cover

143789952
16909643: RNCC: 3 | RNVC: 2

6 Sep 1982

5340-14-462-3571
Access Cover

144623571
74787: RNCC: 3 | RNVC: 2
68251: RNCC: 5 | RNVC: 2

15 Apr 1993

5340-14-504-7279
Access Cover

145047279
2415656008: RNCC: 3 | RNVC: 2
5000822357: RNCC: 3 | RNVC: 2

2 Mar 1998

5340-14-451-1954
Rod End Clevis

144511954
1000177: RNCC: 3 | RNVC: 2
91564388: RNCC: 5 | RNVC: 2

6 Nov 1991

5340-14-427-1634
Rod End Clevis

144271634
034467: RNCC: 3 | RNVC: 2

6 Oct 1988

5340-14-516-2161
Rod End Clevis

145162161
0020343: RNCC: 3 | RNVC: 2

15 Sep 1999

5340-14-553-8452
Mounting Bracket

145538452
82106003001: RNCC: 3 | RNVC: 2

23 May 2007

5340-14-501-5452
Anchor Strap

145015452
3110600524: RNCC: 3 | RNVC: 2

3 Nov 1997

5340-14-455-9299
Rod End Clevis

144559299
PM1A727214123: RNCC: 3 | RNVC: 2
PM1A727214123: RNCC: 5 | RNVC: 2

11 Jun 1992

5340-14-399-2351
Utility Access Door

143992351
AA8716: RNCC: 3 | RNVC: 2
AA8716: RNCC: 5 | RNVC: 2

6 Mar 1985

5340-14-519-4716
Angle Bracket

145194716
252370650: RNCC: 3 | RNVC: 2
542529: RNCC: 5 | RNVC: 2

22 Mar 2000

5340-14-500-6976
Loop Clamp

145006976
F111125: RNCC: 3 | RNVC: 2
F111125: RNCC: 6 | RNVC: 9
F300 0T 024 7167: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-376-6920
Access Cover

143766920
045S03-576405C: RNCC: 3 | RNVC: 2

28 Apr 1982

5340-14-280-1255
Bridge Clamp

142801255
3511 961 22721: RNCC: 3 | RNVC: 2
3511-961-22721: RNCC: 5 | RNVC: 2
MQ12272: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-412-1556
Anchor Strap

144121556
222367: RNCC: 3 | RNVC: 2

8 Oct 1986

5340-14-411-4908
Loop Clamp

144114908
RI-SPAL5021-3PP-DPAL-AS: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-434-0346
Anchor Strap

144340346
538835: RNCC: 3 | RNVC: 2

29 Aug 1989

5340-14-447-1545
Access Cover

144471545
TB3050804: RNCC: 3 | RNVC: 2
70864: RNCC: 5 | RNVC: 9

3 May 1991

5340-14-397-9019
Anchor Strap

143979019
5172044100: RNCC: 3 | RNVC: 2
720441: RNCC: 5 | RNVC: 9

31 Jan 1985

5340-14-524-2304
Access Cover

145242304
8016297K00: RNCC: 3 | RNVC: 2

7 Mar 2001

5340-14-503-0772
Access Cover

145030772
46247035: RNCC: 3 | RNVC: 2

7 Jan 1998

5340-14-396-1794
Plug Button

143961794
6503031F: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-454-9307
Rod End Clevis

144549307
J05555-11-0600P009: RNCC: 3 | RNVC: 2

24 Apr 1992

5340-14-459-5816
Cable Retractor

144595816
EMF 25/101515: RNCC: 3 | RNVC: 2
EMF 25/101515: RNCC: 5 | RNVC: 9

10 Dec 1992

5340-14-351-1357
Runner

143511357
210973: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-472-5879
Dashpot

144725879
2102796: RNCC: 3 | RNVC: 2
NO PRIMARY REF14-472-5879: RNCC: 3 | RNVC: 2
2102796: RNCC: 5 | RNVC: 2

3 Nov 1994

5340-14-364-2667
Retaining Clip

143642667
266-110-17: RNCC: 3 | RNVC: 2
85-691-2837: RNCC: 6 | RNVC: 9

7 Aug 1980

5340-14-396-8294
Loop Clamp

143968294
15363-12: RNCC: 3 | RNVC: 2
15363-12: RNCC: 5 | RNVC: 9
15363-12: RNCC: 5 | RNVC: 9

27 Nov 1984

5340-14-469-7219
Loop Clamp

144697219
332A52-1189-2101: RNCC: 3 | RNVC: 2

4 May 1994

5340-14-539-7526
Cover Strip

145397526
SZ09.251.081: RNCC: 3 | RNVC: 2

5 Feb 2004

5340-14-438-7751
Elastic Strap

144387751
330A93-2041-40: RNCC: 3 | RNVC: 2

4 Apr 1990

5340-14-296-7721
Webbing Strap

142967721
01369-49: RNCC: 3 | RNVC: 2
M01369-49: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-497-7488
Vent Plug

144977488
118350: RNCC: 3 | RNVC: 2
DEO118350: RNCC: 5 | RNVC: 9

15 Oct 1997

5340-14-529-8622
Mounting Plate

145298622
PASSE90593H00: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-14-500-9233
Retaining Band

145009233
16373: RNCC: 3 | RNVC: 2
F300 0T 024 9442: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-502-8045
Retaining Clip

145028045
8T1887: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-499-6892
Mounting Plate

144996892
59495549: RNCC: 3 | RNVC: 2
F300 0T 023 6750: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-513-8571
Angle Bracket

145138571
642385: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-14-515-3206
Compression Cup

145153206
2343433802: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-548-4888
Mounting Bracket

145484888
5010114856: RNCC: 3 | RNVC: 2

23 Jan 2006

5340-14-552-8787
Mounting Bracket

145528787
82173614000: RNCC: 3 | RNVC: 2

10 Feb 2007

5340-14-504-0057
Mounting Bracket

145040057
FE761ME009: RNCC: 3 | RNVC: 2
FE761ME009: RNCC: 5 | RNVC: 9

4 Feb 1998

5340-14-294-0636
Retaining Strap

142940636
0067627120: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-476-7111
Mounting Bracket

144767111
101162401130: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-14-486-3605
Retaining Strap

144863605
350703Y: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-14-502-2551
Mounting Bracket

145022551
17374: RNCC: 3 | RNVC: 2

2 Dec 1997

5340-14-507-2752
Mounting Plate

145072752
TS84273: RNCC: 3 | RNVC: 2

24 Jun 1998

5340-14-378-4726
Mounting Bracket

143784726
8813285009: RNCC: 3 | RNVC: 2

11 Aug 1982

5340-14-489-8456
Retaining Strap

144898456
E4690122: RNCC: 3 | RNVC: 9

26 Aug 1997

5340-14-368-3574
Mending Plate

143683574
BBZ2115: RNCC: 3 | RNVC: 2

20 Feb 1981

5340-14-534-5918
Webbing Strap

145345918
NNM0010032601191: RNCC: 2 | RNVC: 2

26 Mar 2003

5340-14-488-6867
Angle Bracket

144886867
45844429: RNCC: 3 | RNVC: 9

28 May 1997

5340-14-446-2089
Angle Bracket

144462089
EQR001320601: RNCC: 3 | RNVC: 2

6 Mar 1991

5340-14-416-6801
Angle Bracket

144166801
412802020002: RNCC: 3 | RNVC: 2

25 Jun 1987

5340-14-312-8305
Mounting Bracket

143128305
0249857330: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-545-7001
Mounting Bracket

145457001
RA1M703616221: RNCC: 3 | RNVC: 2

27 Apr 2005

5340-14-483-7854
Shelf Bracket

144837854
POT01PD000017: RNCC: 3 | RNVC: 9

3 Oct 1996

5340-14-500-4070
Shelf Bracket

145004070
14300620C: RNCC: 3 | RNVC: 2
F300 0T 024 4171: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-235-6061
Loop Clamp

142356061
C4912: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-312-3995
Butt Hinge

143123995
16383662: RNCC: 3 | RNVC: 2
16383662: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-394-9165
Angle Bracket

143949165
20155496: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-396-2700
Angle Bracket

143962700
571213: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-408-4426
Control Rod

144084426
RSM38043: RNCC: 3 | RNVC: 2

27 Mar 1986

5340-14-258-1488
Access Cover

142581488
F117775: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-503-5889
Access Cover

145035889
47135868: RNCC: 3 | RNVC: 2

21 Jan 1998

5340-14-382-5360
Access Cover

143825360
16760978: RNCC: 3 | RNVC: 2
16760978: RNCC: 5 | RNVC: 9

17 Feb 1983

5340-14-436-8502
Cover Strip

144368502
DA2C244926705: RNCC: 3 | RNVC: 2

3 Jan 1990

5340-14-249-8165
Rod End Clevis

142498165
25635: RNCC: 3 | RNVC: 2
0942490041: RNCC: 5 | RNVC: 2
0942490041: RNCC: 5 | RNVC: 9
942490041: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-517-3440
Locking Stay

145173440
10556949: RNCC: 3 | RNVC: 2

3 Dec 1999

5340-14-405-1725
Access Cover

144051725
355427: RNCC: 3 | RNVC: 2
355427: RNCC: 5 | RNVC: 9

27 Nov 1985

5340-14-414-7400
Rod End Clevis

144147400
346588: RNCC: 3 | RNVC: 2
346588: RNCC: 5 | RNVC: 9

26 Feb 1987

5340-14-527-4139
Access Cover

145274139
P106582V: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-14-504-0252
Access Cover

145040252
39293781: RNCC: 3 | RNVC: 2
39293781: RNCC: 3 | RNVC: 9

4 Feb 1998

5340-14-408-5271
Access Cover

144085271
NO PRIMARY REF14-408-5271: RNCC: 3 | RNVC: 2
D40-24228: RNCC: 5 | RNVC: 9

2 Apr 1986

5340-14-503-0019
Retaining Strap

145030019
330A22-2514-20: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-514-4627
Access Hole Frame

145144627
10375650: RNCC: 3 | RNVC: 2
IF-192-2899: RNCC: 5 | RNVC: 9

26 May 1999

5340-14-533-5022
Retaining Band

145335022
39406029: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-14-230-7333
Handwheel

142307333
GSM137-001F17-3C1: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-435-9044
Access Cover

144359044
0870133M00: RNCC: 3 | RNVC: 2

29 Nov 1989

5340-14-545-4250
Rod End Clevis

145454250
RA1M793200311: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-14-515-4439
Bow Handle

145154439
660252: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-451-6878
Rim Lock Set

144516878
4717834-72: RNCC: 3 | RNVC: 2
4717834-72: RNCC: 3 | RNVC: 2
4717834-72: RNCC: 5 | RNVC: 9

2 Dec 1991

5340-14-504-3366
Butt Hinge

145043366
3900658M91: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-396-3722
Access Cover

143963722
477207D: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-427-3252
Access Cover

144273252
600A065: RNCC: 3 | RNVC: 2
600A065: RNCC: 5 | RNVC: 2

13 Oct 1988

5340-14-402-0425
Retaining Strap

144020425
219844: RNCC: 3 | RNVC: 2

26 Jun 1985

5340-14-548-5653
Mounting Bracket

145485653
S45091057: RNCC: 3 | RNVC: 2
5001864924: RNCC: 3 | RNVC: 2

26 Jan 2006

5340-14-503-0759
Mounting Bracket

145030759
46246486: RNCC: 3 | RNVC: 2
46246486: RNCC: 5 | RNVC: 9

7 Jan 1998

5340-14-477-7431
Tubular Fairlead

144777431
1059530S00: RNCC: 3 | RNVC: 2

20 Sep 1995

5340-14-532-1369
Mounting Plate

145321369
5010559931: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-14-551-7373
Mounting Plate

145517373
RA1M701774421N1: RNCC: 3 | RNVC: 2

19 Oct 2006

5340-14-517-6990
Mounting Bracket

145176990
PM1A606106290: RNCC: 3 | RNVC: 2
PM1A606106290: RNCC: 5 | RNVC: 2

5 Jan 2000

5340-14-426-7096
Runner

144267096
20393558: RNCC: 3 | RNVC: 2

15 Sep 1988

5340-14-521-9433
Mounting Bracket

145219433
T711A1005318: RNCC: 3 | RNVC: 2

27 Sep 2000

5340-14-338-7656
Retaining Strap

143387656
TH20D643: RNCC: 3 | RNVC: 2

17 Dec 1976

5340-14-238-5547
Loop Clamp

142385547
0425129800: RNCC: 3 | RNVC: 2
0425129800: RNCC: 3 | RNVC: 9
0425129800: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-446-0172
Bow Handle

144460172
2786033MI: RNCC: 3 | RNVC: 2

4 Mar 1991

5340-14-521-8968
Plug Button

145218968
MR2019670100720: RNCC: 3 | RNVC: 2
RBE002670101101: RNCC: 3 | RNVC: 2

25 Sep 2000

5340-14-226-1878
Loop Clamp

142261878
511131050252: RNCC: 3 | RNVC: 2
55G25: RNCC: 5 | RNVC: 2

1 Jan 1966

5340-14-292-4281
Control Rod

142924281
0697761: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-436-3248
Mounting Plate

144363248
3169876: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-14-218-5863
Loop Clamp

142185863
694001-1: RNCC: 3 | RNVC: 2
694001-1: RNCC: 5 | RNVC: 2
694001-1: RNCC: 5 | RNVC: 9

27 Aug 1997

5340-14-533-5385
Angle Bracket

145335385
192E353-00: RNCC: 3 | RNVC: 2

10 Feb 2003

5340-14-549-3543
Utility Access Door

145493543
8309-2: RNCC: 3 | RNVC: 2

24 Mar 2006

5340-14-535-2333
Angle Bracket

145352333
RA1M240730121: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-468-6340
Mounting Plate

144686340
132E467-00: RNCC: 3 | RNVC: 2
132E467-00: RNCC: 5 | RNVC: 9

14 Mar 1994

5340-14-270-2759
Rod End Clevis

142702759
645-91F32DM: RNCC: 3 | RNVC: 2
645-91-32DM: RNCC: 5 | RNVC: 2
645-91F32M: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-468-5066
Angle Bracket

144685066
305-057-410-0: RNCC: 3 | RNVC: 2

3 Mar 1994

5340-14-542-0108
Bow Handle

145420108
20044-858: RNCC: 3 | RNVC: 2
502118020001A: RNCC: 3 | RNVC: 9

2 Jul 2004

5340-14-254-9795
Bow Handle

142549795
321A71-2064-00: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-409-6995
Butt Hinge

144096995
45-1-3311: RNCC: 3 | RNVC: 2

28 May 1986

5340-14-220-9185
Access Cover

142209185
2-140165-8: RNCC: 3 | RNVC: 2
140165: RNCC: 5 | RNVC: 9
2-140165-8: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-463-2917
Protection Bellows

144632917
TB30-47012-106: RNCC: 3 | RNVC: 2
TB30-47012-106: RNCC: 5 | RNVC: 2

8 Jun 1993

5340-14-305-3008
Locking Stay

143053008
K00369-93: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-541-4822
Mounting Plate

145414822
88179-2124: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-524-0256
Loop Clamp

145240256
2424-09: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-14-458-7538
Butt Hinge

144587538
CLB43-13-800-22: RNCC: 3 | RNVC: 2

3 Nov 1992

5340-14-281-2493
Rod End Clevis

142812493
121A26-721-02-0: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-547-1707
Access Cover

145471707
BCTS71E-12.00: RNCC: 3 | RNVC: 2

30 Sep 2005

5340-14-526-0367
Access Cover

145260367
103-41-150: RNCC: 3 | RNVC: 2
103-41-150: RNCC: 5 | RNVC: 2

28 Jun 2001

5340-14-348-6249
Angle Bracket

143486249
4H009054-00: RNCC: 3 | RNVC: 2
4H009054-00: RNCC: 5 | RNVC: 9

19 Apr 1978

5340-14-301-0299
Synchro Clamp

143010299
S3488-2DG: RNCC: 3 | RNVC: 2
S3488-2: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-361-7011
Mortise Lock Set

143617011
327BTS1: RNCC: 3 | RNVC: 2
U01520-71: RNCC: 5 | RNVC: 2

20 Feb 1980

5340-14-032-0536
Retaining Strap

140320536
F706-390: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-319-1480
Anchor Strap

143191480
NO PRIMARY REF14-319-1480: RNCC: 3 | RNVC: 2
19258577: RNCC: 5 | RNVC: 2
258577: RNCC: 5 | RNVC: 9
S258577: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-473-1275
Bridge Clamp

144731275
050A57-520531K: RNCC: 3 | RNVC: 2
0520531K00: RNCC: 5 | RNVC: 2

7 Dec 1994

5340-14-315-4550
Loop Clamp

143154550
6208446640: RNCC: 3 | RNVC: 2
620-844-664-0: RNCC: 5 | RNVC: 2
620-844-664-0: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-314-9790
Mending Plate

143149790
P73972: RNCC: 3 | RNVC: 2
P73972: RNCC: 5 | RNVC: 9
P73972: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-555-3582
Masking Plate

145553582
62064485AA: RNCC: 3 | RNVC: 2

30 Oct 2007

5340-14-484-6698
Retaining Bail

144846698
29445222: RNCC: 3 | RNVC: 2

28 Nov 1996

5340-14-373-6550
Retaining Strap

143736550
BAZ96985: RNCC: 3 | RNVC: 2

13 Nov 1981

5340-14-443-0585
Cover Strip

144430585
PM1A227018028: RNCC: 3 | RNVC: 2
PM1A227018028: RNCC: 5 | RNVC: 2

7 Nov 1990

5340-14-493-8478
Mounting Bracket

144938478
4773710040: RNCC: 3 | RNVC: 2
F300 0T 014 2985: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-360-1650
Angle Bracket

143601650
A11A221172080: RNCC: 3 | RNVC: 2

31 Oct 1979

5340-14-462-2802
Flush Lock

144622802
SMCFAGEB0091C: RNCC: 3 | RNVC: 2

15 Apr 1993

5340-14-358-6000
Loop Clamp

143586000
51115305029: RNCC: 3 | RNVC: 2
25S29: RNCC: 5 | RNVC: 2

7 Sep 1979

5340-14-547-4570
Mounting Plate

145474570
5010258961: RNCC: 3 | RNVC: 2

13 Oct 2005

5340-14-223-2057
Control Rod

142232057
700072: RNCC: 3 | RNVC: 9
51334: RNCC: 5 | RNVC: 9
062051334: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-434-8399
Locking Stay

144348399
2413324: RNCC: 3 | RNVC: 2

4 Oct 1989

5340-14-419-7263
Access Cover

144197263
TLH0TF401: RNCC: 3 | RNVC: 2

5 Nov 1987

5340-14-555-1309
Mounting Bracket

145551309
82183821000: RNCC: 3 | RNVC: 2

3 Oct 2007

5340-14-545-3985
Angle Bracket

145453985
DA2C201740643: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-14-488-6819
Clamping Catch

144886819
ACA0008: RNCC: 3 | RNVC: 2
F300 0T 023 6511: RNCC: 6 | RNVC: 9

28 May 1997

5340-14-543-0424
Rod End Clevis

145430424
9502BDR123-0001: RNCC: 3 | RNVC: 2
9502BDR1230001: RNCC: 5 | RNVC: 2

18 Aug 2004

5340-14-366-2709
Angle Bracket

143662709
A11A231210102: RNCC: 3 | RNVC: 2

4 Nov 1980

5340-14-518-6297
Mounting Bracket

145186297
5010268031: RNCC: 3 | RNVC: 2
5010268031: RNCC: 3 | RNVC: 9

9 Feb 2000

5340-14-339-2806
Expansion Plug

143392806
0915-10: RNCC: 3 | RNVC: 2
7903075017: RNCC: 3 | RNVC: 2
7903075017: RNCC: 5 | RNVC: 2
7056079209: RNCC: 5 | RNVC: 9
79-03-075-017: RNCC: 5 | RNVC: 9

18 Jan 1977

5340-14-395-6484
Butt Hinge

143956484
330A25-2232-01: RNCC: 3 | RNVC: 2
330A252232-01: RNCC: 5 | RNVC: 2

30 Oct 1984

5340-14-412-4821
Tubular Fairlead

144124821
4771821060: RNCC: 3 | RNVC: 2

15 Oct 1986

5340-14-541-3639
Webbing Strap

145413639
DLTMAST0001: RNCC: 3 | RNVC: 2

3 Jun 2004

5340-14-243-1438
Retaining Strap

142431438
70849634: RNCC: 3 | RNVC: 2
70849634: RNCC: 5 | RNVC: 9
849634: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-500-5491
Mounting Plate

145005491
D63703000000: RNCC: 3 | RNVC: 2
F300 0T 024 5674: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-505-7625
Bumper

145057625
MB1850F00: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-204-7160
Loop Clamp

142047160
3130S23-16-016: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-14-322-9638
Suction Cup

143229638
121E93-138-10-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-389-2142
Angle Bracket

143892142
BSC8PA101-0002: RNCC: 3 | RNVC: 2
85-692-3777: RNCC: 6 | RNVC: 9

29 Nov 1983

5340-14-501-9365
Cover Strip

145019365
332A08-4693-36: RNCC: 3 | RNVC: 2

19 Nov 1997

5340-14-372-7316
Rod End Clevis

143727316
107-17-00-06: RNCC: 3 | RNVC: 2
107-17-00-06: RNCC: 5 | RNVC: 2

21 Sep 1981

5340-14-446-2809
Access Cover

144462809
41-39609: RNCC: 3 | RNVC: 2
41-39609: RNCC: 5 | RNVC: 9

12 Mar 1991

5340-14-441-2056
Angle Bracket

144412056
332A93-3111-20: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-548-0137
Bumper

145480137
3018-026-60NR11: RNCC: 3 | RNVC: 2

6 Dec 2005

5340-14-326-1811
Rod End Clevis

143261811
L765-31M13P2A: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-464-7717
Angle Bracket

144647717
365A65-3304-BS: RNCC: 3 | RNVC: 2

1 Sep 1993

5340-14-428-5511
Runner

144285511
4604DME000-0005: RNCC: 3 | RNVC: 2

8 Dec 1988

5340-14-338-4701
Rod End Clevis

143384701
C1-46220: RNCC: 3 | RNVC: 2

6 Nov 1976

5340-14-449-6663
Bumper

144496663
50431: RNCC: 3 | RNVC: 2
85-694-1678: RNCC: 6 | RNVC: 9

28 Aug 1991

5340-14-515-9288
Access Cover

145159288
99 08-021: RNCC: 3 | RNVC: 2

26 Aug 1999

5340-14-342-1362
Retaining Strap

143421362
19271724: RNCC: 3 | RNVC: 2
S271724: RNCC: 5 | RNVC: 2
85-675-6421: RNCC: 6 | RNVC: 9

14 Apr 1977

5340-14-389-4687
Rod End Connector

143894687
365A58-1102-NS01: RNCC: 3 | RNVC: 2
365A58-1102NS01: RNCC: 5 | RNVC: 2

20 Dec 1983

5340-14-432-8498
Mounting Bracket

144328498
853-300-351-0: RNCC: 3 | RNVC: 2

28 Jun 1989

5340-14-489-6493
Mending Plate

144896493
332A21-1016-66: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-14-406-2449
Retaining Strap

144062449
5097-09: RNCC: 3 | RNVC: 2
7910026134: RNCC: 5 | RNVC: 2

8 Jan 1986

5340-14-473-6505
Flush Catch Claw

144736505
332A25-1340-00: RNCC: 3 | RNVC: 2

4 Jan 1995

5340-14-484-6370
Bumper

144846370
6319-03-200: RNCC: 3 | RNVC: 2

28 Nov 1996

5340-14-531-8303
Synchro Clamp

145318303
341A69-6505-27: RNCC: 3 | RNVC: 2

18 Sep 2002

5340-14-470-7948
Retaining Strap

144707948
321A60-4615-20: RNCC: 3 | RNVC: 2
85-689-6565: RNCC: 6 | RNVC: 9

6 Jul 1994

5340-14-334-2822
Butt Hinge

143342822
SM1-01-02-05: RNCC: 3 | RNVC: 2

23 Apr 1976

5340-14-520-4444
Mounting Bracket

145204444
M45AA0101-760: RNCC: 3 | RNVC: 2
M45AA0101-760: RNCC: 5 | RNVC: 9

17 May 2000

5340-14-309-9182
Screw Hook

143099182
422-101: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-523-3841
Mounting Plate

145233841
8014924C00: RNCC: 3 | RNVC: 2

17 Jan 2001

5340-14-354-5108
Rod End Clevis

143545108
EA1M178-29-821: RNCC: 3 | RNVC: 2

31 Jan 1979

5340-14-284-6929
Bumper

142846929
121E23-535-28-2: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-464-9436
Threaded Rod End

144649436
9970-147-174: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-204-3492
Expansion Plug

142043492
R93911-30AGZ: RNCC: 2 | RNVC: 2
M3C822-11-823: RNCC: 3 | RNVC: 2
0702991200: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-14-553-4618
Angle Bracket

145534618
DE2B202700029SPL: RNCC: 3 | RNVC: 2

5 Apr 2007

5340-14-389-5472
Angle Bracket

143895472
365A87-3034-67: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-311-6787
Angle Bracket

143116787
319A88-00-222: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-393-5457
Loop Clamp

143935457
945142: RNCC: 3 | RNVC: 2
945142: RNCC: 5 | RNVC: 9

7 Apr 1984

5340-14-501-1590
Mounting Bracket

145011590
014-016-130: RNCC: 3 | RNVC: 2
014.016.130: RNCC: 3 | RNVC: 2
F300 0T 025 1992: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-472-5850
Clamp Bolt Assembly

144725850
S3SD18129-4: RNCC: 3 | RNVC: 2
S3SD18129-4: RNCC: 5 | RNVC: 2
T257A40T0000: RNCC: 5 | RNVC: 2

3 Nov 1994

5340-14-473-4331
Mounting Bracket

144734331
VIP-152N: RNCC: 3 | RNVC: 2

31 Dec 1994

5340-14-040-2845
Retaining Strap

140402845
S250865: RNCC: 3 | RNVC: 2
S250865: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-525-5061
Mounting Plate

145255061
5010360291: RNCC: 3 | RNVC: 2

6 Jun 2001

5340-14-323-5872
Webbing Strap

143235872
AP7-8: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-284-6553
Mending Plate

142846553
12504282: RNCC: 3 | RNVC: 2
12504282: RNCC: 3 | RNVC: 9

1 Jan 1972

5340-14-502-5386
Bow Handle

145025386
5000812085: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-551-9184
Mounting Bracket

145519184
43043400: RNCC: 3 | RNVC: 2
43043400: RNCC: 3 | RNVC: 9

8 Nov 2006

5340-14-549-0859
Cover Strip

145490859
RA1M705232241N1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-549-5821
Handle Grip

145495821
2403Y5: RNCC: 3 | RNVC: 2

19 Apr 2006

5340-14-519-6152
Cover Strip

145196152
C710A1100202: RNCC: 3 | RNVC: 2

22 Mar 2000

5340-14-445-8899
Bridge Clamp

144458899
45611413: RNCC: 3 | RNVC: 2
45611413: RNCC: 5 | RNVC: 9

27 Feb 1991

5340-14-451-2498
Pipe Hanger

144512498
PM1A726164270: RNCC: 3 | RNVC: 2
PM1A726164270: RNCC: 5 | RNVC: 2

6 Nov 1991

5340-14-502-5994
Mounting Bracket

145025994
5010038316: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-537-8462
Loop Clamp

145378462
EN2901P14W: RNCC: 2 | RNVC: 2

28 Nov 2003

5340-14-501-6332
Mounting Plate

145016332
39257641: RNCC: 3 | RNVC: 2
39257641: RNCC: 3 | RNVC: 9

5 Nov 1997

5340-14-312-8869
Retaining Strap

143128869
160-79587D: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-440-6358
Bumper

144406358
0878427A02: RNCC: 3 | RNVC: 2

18 Jul 1990

5340-14-447-3845
Strap Hinge

144473845
16214910: RNCC: 3 | RNVC: 2

15 May 1991

5340-14-444-7788
Control Rod

144447788
A44741: RNCC: 3 | RNVC: 2

21 Jan 1991

5340-14-383-5155
Loop Clamp

143835155
20189219: RNCC: 3 | RNVC: 2
20189219: RNCC: 5 | RNVC: 9

11 Apr 1983

5340-14-527-7439
Mounting Plate

145277439
705251: RNCC: 3 | RNVC: 2

14 Nov 2001

5340-14-533-9318
Runner

145339318
CH109: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-14-530-7738
Synchro Clamp

145307738
7505719W00: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-14-425-9657
Angle Bracket

144259657
BAZ6495: RNCC: 3 | RNVC: 2
BAZ6495: RNCC: 5 | RNVC: 2

28 Jul 1988

5340-14-530-0936
Mounting Plate

145300936
8031024M00: RNCC: 3 | RNVC: 2

14 May 2002

5340-14-404-6580
Access Cover

144046580
5171568500: RNCC: 3 | RNVC: 2
715685: RNCC: 5 | RNVC: 2

20 Nov 1985

5340-14-447-6321
Access Cover

144476321
5000920984: RNCC: 3 | RNVC: 2

29 May 1991

5340-14-442-1642
Access Cover

144421642
16585773: RNCC: 3 | RNVC: 2

3 Oct 1990

5340-14-348-1112
Rod End Clevis

143481112
C58813: RNCC: 3 | RNVC: 2

29 Mar 1978

5340-14-426-3167
Rod End Clevis

144263167
60590: RNCC: 3 | RNVC: 2

23 Aug 1988

5340-14-409-3964
Anchor Strap

144093964
148292702: RNCC: 3 | RNVC: 2

28 May 1986

5340-14-317-8240
Pipe Hanger

143178240
0264302130: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-413-9110
Retaining Strap

144139110
70728: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-371-5165
Loop Clamp

143715165
20155767: RNCC: 3 | RNVC: 2

5 Aug 1981

5340-14-390-1362
Bail Handle

143901362
366A25-1178-01: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-14-457-2619
Mounting Plate

144572619
402208A-SG10137-Z2CND17-12: RNCC: 3 | RNVC: 2

20 Aug 1992

5340-14-366-8591
Cover Strip

143668591
330A58-6122-20: RNCC: 3 | RNVC: 2

20 Nov 1980

5340-14-462-7466
Angle Bracket

144627466
LBR532A201-202: RNCC: 3 | RNVC: 2

28 Apr 1993

5340-14-379-1342
Loop Clamp

143791342
NO PRIMARY REF14-379-1342: RNCC: 3 | RNVC: 2
F11QR3121-037: RNCC: 5 | RNVC: 9

6 Sep 1982

5340-14-449-8319
Mounting Bracket

144498319
993-04-02-05: RNCC: 3 | RNVC: 2

11 Sep 1991

5340-14-432-1489
Block Clamp

144321489
NO PRIMARY REF14-432-1489: RNCC: 3 | RNVC: 2
3511-314-96431: RNCC: 5 | RNVC: 9

24 May 1989

5340-14-535-6216
Synchro Clamp

145356216
HD-125-1139: RNCC: 3 | RNVC: 2
HD-125-1139: RNCC: 3 | RNVC: 9
8047097L00: RNCC: 5 | RNVC: 2

11 Jun 2003

5340-14-316-4621
Loop Clamp

143164621
BN418-501F11E1: RNCC: 3 | RNVC: 2
2200035: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-522-9587
Mounting Bracket

145229587
ST159-2M561P35: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-14-435-2984
Case Corner

144352984
330A22-2243-28: RNCC: 3 | RNVC: 2

2 Nov 1989

5340-14-461-0323
Angle Bracket

144610323
RU970-0042M1217P14: RNCC: 3 | RNVC: 2
ES4631M1P13: RNCC: 5 | RNVC: 2

17 Feb 1993

5340-14-391-7823
Angle Bracket

143917823
78701-049A: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-471-9312
Bow Handle

144719312
312-07960-001: RNCC: 3 | RNVC: 2

28 Sep 1994

5340-14-483-3886
Door Handle

144833886
332A25-1068-04: RNCC: 3 | RNVC: 2

11 Sep 1996

5340-14-521-4468
Mounting Bracket

145214468
15160-632088: RNCC: 3 | RNVC: 2
160-632088: RNCC: 5 | RNVC: 2

27 Jul 2000

5340-14-318-0930
Retaining Strap

143180930
M3E581-021: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-349-2639
Filler Opening Cap

143492639
0M 59290842: RNCC: 3 | RNVC: 2
3131671: RNCC: 5 | RNVC: 2
5000497732: RNCC: 5 | RNVC: 2
59-29-0842: RNCC: 5 | RNVC: 9
59290842: RNCC: 5 | RNVC: 9
5000497732: RNCC: 5 | RNVC: 9
59-29-0842: RNCC: 5 | RNVC: 9

22 May 1978

5340-14-410-0764
Loop Clamp

144100764
61100001014: RNCC: 3 | RNVC: 2
HB245N14: RNCC: 5 | RNVC: 2
85-693-2910: RNCC: 6 | RNVC: 9

4 Jun 1986

5340-14-506-2514
Cover Strip

145062514
332A22-0125-53: RNCC: 3 | RNVC: 2

15 Apr 1998

5340-14-495-3042
Mounting Bracket

144953042
TB1020101F113: RNCC: 3 | RNVC: 2
F300 0T 018 9936: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-214-0478
Loop Clamp

142140478
0000055874: RNCC: 3 | RNVC: 9
0000055874: RNCC: 5 | RNVC: 9
55874: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-490-2332
Hand Crank Arm

144902332
6742-31: RNCC: 3 | RNVC: 2
9622852180: RNCC: 5 | RNVC: 2

24 Sep 1997

5340-14-298-1762
Retaining Strap

142981762
NO PRIMARY REF14-298-1762: RNCC: 3 | RNVC: 2
87482: RNCC: 5 | RNVC: 9
00-704-7998: RNCC: 6 | RNVC: 9

1 Jan 1973

5340-14-338-4390
Angle Bracket

143384390
321A51-0228-23: RNCC: 3 | RNVC: 2

6 Nov 1976

5340-14-529-5512
Mounting Bracket

145295512
330AMR-1232-20: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-505-6323
Mounting Bracket

145056323
E22804000009: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-568-6530
Utility Resilient Mount

145686530
VA3030: RNCC: 3 | RNVC: 2

24 Jun 2011

5340-14-281-7253
Mending Plate

142817253
NO PRIMARY REF14-281-7253: RNCC: 3 | RNVC: 2
WBB30W17D: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-424-0811
Angle Bracket

144240811
5172060200: RNCC: 3 | RNVC: 2
720602: RNCC: 5 | RNVC: 9

11 May 1988

5340-14-478-0767
Rigid Caster

144780767
M418610A9280A01: RNCC: 3 | RNVC: 2

11 Oct 1995

5340-14-533-5003
Access Cover

145335003
39136512: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-14-388-8037
Access Cover

143888037
5100213: RNCC: 3 | RNVC: 2
5000495562: RNCC: 5 | RNVC: 2

29 Nov 1983

5340-14-207-9856
Retaining Strap

142079856
0601769800: RNCC: 3 | RNVC: 2
6017698: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-422-4803
Butt Hinge

144224803
DA1N202701550A1: RNCC: 3 | RNVC: 2

3 Mar 1988

5340-14-519-5523
Mounting Plate

145195523
445274: RNCC: 3 | RNVC: 9

22 Mar 2000

5340-14-526-9554
Door Handle

145269554
10605710: RNCC: 3 | RNVC: 2

19 Sep 2001

5340-14-471-7241
Runner

144717241
2017661L: RNCC: 3 | RNVC: 2

14 Sep 1994

5340-14-363-8587
Angle Bracket

143638587
0249727350: RNCC: 3 | RNVC: 2

7 Aug 1980

5340-14-314-3100
Angle Bracket

143143100
0000407606: RNCC: 3 | RNVC: 2
0000407606: RNCC: 5 | RNVC: 9
407606: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-326-8932
Strap Hinge

143268932
0000647456: RNCC: 3 | RNVC: 2
0000647456: RNCC: 5 | RNVC: 9
647456: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-475-3297
Retaining Strap

144753297
575417: RNCC: 3 | RNVC: 2

29 Mar 1995

5340-14-339-3055
Angle Bracket

143393055
5000001620: RNCC: 3 | RNVC: 2
5000001620: RNCC: 5 | RNVC: 9

18 Jan 1977

5340-14-512-2150
Mounting Plate

145122150
4133-7023: RNCC: 3 | RNVC: 2

8 Feb 1999

5340-14-350-4605
Angle Bracket

143504605
216616: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-405-2885
Angle Bracket

144052885
526725000: RNCC: 3 | RNVC: 2

27 Nov 1985

5340-14-324-0948
Handle Grip

143240948
466-9M5P372: RNCC: 3 | RNVC: 2
466-9M5P372: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-502-8467
Lock Bolt

145028467
9R6219: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-293-9725
Control Rod

142939725
411MA0343REP1: RNCC: 3 | RNVC: 2
411MA343F11REP1: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-446-7403
Mounting Plate

144467403
39152655: RNCC: 3 | RNVC: 2

9 Apr 1991

5340-14-360-1655
Angle Bracket

143601655
A11A221176330A1: RNCC: 3 | RNVC: 2

31 Oct 1979

5340-14-351-1631
Retaining Strap

143511631
218020: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-547-7213
Mounting Bracket

145477213
101 767 47: RNCC: 3 | RNVC: 2
AA018083: RNCC: 6 | RNVC: 9

7 Nov 2005

5340-14-356-7526
Loop Clamp

143567526
51423105018: RNCC: 3 | RNVC: 2
38GE18: RNCC: 5 | RNVC: 2

15 May 1979

5340-14-343-6630
Angle Bracket

143436630
16395838: RNCC: 3 | RNVC: 2
16395838: RNCC: 5 | RNVC: 9

13 Jul 1977

5340-14-472-4793
Swivel Caster

144724793
127.0432: RNCC: 3 | RNVC: 9
1095122A00: RNCC: 5 | RNVC: 2
MPR127.0432: RNCC: 5 | RNVC: 9

26 Oct 1994

5340-14-486-5128
Mounting Bracket

144865128
94018552: RNCC: 3 | RNVC: 2

21 Mar 1997

5340-14-550-6175
Section Block Clamp

145506175
RA1B236350211: RNCC: 3 | RNVC: 2

3 Jul 2006

5340-14-371-3806
Mounting Plate

143713806
004390035P: RNCC: 3 | RNVC: 2

5 Aug 1981

5340-14-533-9878
Mounting Bracket

145339878
10676353000: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-14-514-6343
Mounting Plate

145146343
70100P13: RNCC: 3 | RNVC: 2

3 Jun 1999

5340-14-508-2683
Mounting Bracket

145082683
10034995: RNCC: 3 | RNVC: 2

2 Sep 1998

5340-14-553-2672
Mounting Bracket

145532672
T947G4001127: RNCC: 3 | RNVC: 2

20 Mar 2007

5340-14-031-7722
Bridge Clamp

140317722
16214780: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-276-2236
Bridge Clamp

142762236
A50633: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-497-0028
Mounting Plate

144970028
56010300011: RNCC: 3 | RNVC: 2
F300 0T 022 5245: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-547-1682
Mounting Bracket

145471682
5010616792: RNCC: 3 | RNVC: 2

29 Sep 2005

5340-14-392-9797
Angle Bracket

143929797
0000783730: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-503-5900
Angle Bracket

145035900
47029672: RNCC: 3 | RNVC: 2

21 Jan 1998

5340-14-313-8937
Loop Clamp

143138937
51210602008: RNCC: 3 | RNVC: 2
20F8: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-544-9093
Mounting Bracket

145449093
5010452526: RNCC: 3 | RNVC: 2

3 Mar 2005

5340-14-555-0067
Mounting Bracket

145550067
E0708G0A: RNCC: 3 | RNVC: 2

18 Sep 2007

5340-14-480-2116
Rope Cleat

144802116
2752: RNCC: 3 | RNVC: 2
F6411610: RNCC: 5 | RNVC: 2

28 Feb 1996

5340-14-253-9708
Retaining Clip

142539708
C50771: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-541-8430
Lock Bolt

145418430
F1263247: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-14-418-2337
Mounting Plate

144182337
16196163: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-14-445-0527
Loop Clamp

144450527
533097: RNCC: 3 | RNVC: 2

31 Jan 1991

5340-14-456-1376
Mounting Bracket

144561376
5000660307: RNCC: 3 | RNVC: 2

18 Jun 1992

5340-14-538-7745
Handwheel

145387745
NGM0011040319586: RNCC: 2 | RNVC: 2

9 Dec 2003

5340-14-439-5630
Mounting Bracket

144395630
038458E: RNCC: 3 | RNVC: 2
489555Z: RNCC: 5 | RNVC: 2

15 May 1990

5340-14-315-2819
Strap Fastener Loop

143152819
001196013P: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-429-3919
Flush Lock

144293919
1277-830: RNCC: 3 | RNVC: 2
1277-830: RNCC: 3 | RNVC: 9

20 Jan 1989

5340-14-303-4805
Loop Clamp

143034805
501-779-779-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-220-5007
Rod End Connector

142205007
502-702-073-0: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-497-5894
Mounting Plate

144975894
2M5007: RNCC: 3 | RNVC: 2
F300 0T 023 3927: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-494-6007
Surface Bolt

144946007
60106053: RNCC: 3 | RNVC: 2
802 611 467: RNCC: 3 | RNVC: 2

15 Oct 1997

5340-14-441-1767
Mounting Plate

144411767
MEH507-2: RNCC: 3 | RNVC: 2
89280371: RNCC: 5 | RNVC: 2

22 Aug 1990

5340-14-521-1150
Strap Fastener Loop

145211150
SA27-3-1-7: RNCC: 3 | RNVC: 2

11 Jul 2000

5340-14-339-3712
Webbing Strap

143393712
CG122-1-2: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-465-6230
Thumb Latch

144656230
52000003: RNCC: 3 | RNVC: 2

5 Oct 1993

5340-14-548-6558
Mounting Plate

145486558
FAHK5 044 05 P 1050320: RNCC: 3 | RNVC: 2

30 Jan 2006

5340-14-549-1114
Mounting Bracket

145491114
RA1M217760141: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-495-9424
Mending Plate

144959424
TH20K944-6: RNCC: 3 | RNVC: 2
F300 0T 020 5531: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-497-9691
Pawl Fastener

144979691
1000-U241: RNCC: 3 | RNVC: 2
1000-U241: RNCC: 5 | RNVC: 2

29 Oct 1997

5340-14-282-5372
Access Hole Frame

142825372
40320-1: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-550-9197
Angle Bracket

145509197
RA1B702602141: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-446-3734
Mending Plate

144463734
1055037: RNCC: 3 | RNVC: 2
1055037: RNCC: 5 | RNVC: 2

18 Mar 1991

5340-14-493-3114
Angle Bracket

144933114
601587: RNCC: 3 | RNVC: 2
F300 0T 012 1719: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-521-0367
Mounting Plate

145210367
46253436: RNCC: 3 | RNVC: 2
05500121: RNCC: 3 | RNVC: 2

4 Jul 2000

5340-14-501-8909
Mounting Bracket

145018909
38222624: RNCC: 3 | RNVC: 2
38222624: RNCC: 5 | RNVC: 9

19 Nov 1997

5340-14-406-1319
Bow Handle

144061319
006262080P: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-497-4754
Mounting Bracket

144974754
A26317: RNCC: 3 | RNVC: 2
F300 0T 023 2399: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-543-3792
Mounting Bracket

145433792
071626987000003: RNCC: 3 | RNVC: 2

23 Oct 2004

5340-14-548-8583
Mounting Bracket

145488583
0298700520: RNCC: 3 | RNVC: 2

20 Feb 2006

5340-14-432-7444
Quick Release Pin

144327444
51453C10R10NW: RNCC: 3 | RNVC: 2
51453C10R10NW: RNCC: 3 | RNVC: 2
51453C10R10NW: RNCC: 5 | RNVC: 9

21 Jun 1989

5340-14-521-0603
Synchro Clamp

145210603
22-086-200: RNCC: 3 | RNVC: 2

5 Jul 2000

5340-14-407-5144
Runner

144075144
NO PRIMARY REF14-407-5144: RNCC: 3 | RNVC: 2
D20-34334: RNCC: 5 | RNVC: 9

27 Feb 1986

5340-14-363-9035
Webbing Strap

143639035
M376-510000: RNCC: 3 | RNVC: 2

7 Aug 1980

5340-14-543-5524
Mounting Bracket

145435524
010622041R: RNCC: 3 | RNVC: 2

20 Nov 2004

5340-14-557-9203
Utility Access Door

145579203
213176: RNCC: 3 | RNVC: 2

30 Jul 2008

5340-14-327-5674
Mending Plate

143275674
198121: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-220-4948
Access Cover

142204948
613-990-052-0: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-523-6183
Loop Clamp

145236183
J1236902: RNCC: 3 | RNVC: 2
298480035: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-14-550-9167
Angle Bracket

145509167
RA1B701756251: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-551-0223
Lock Bolt

145510223
9332020: RNCC: 3 | RNVC: 2

22 Aug 2006

5340-14-553-8453
Mounting Bracket

145538453
82106262000: RNCC: 3 | RNVC: 2

23 May 2007

5340-14-500-5255
Butt Hinge

145005255
31131: RNCC: 3 | RNVC: 2
F300 0T 024 5428: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-518-9938
Mounting Plate

145189938
707470: RNCC: 3 | RNVC: 2

1 Mar 2000

5340-14-460-7008
Metal Grille

144607008
20322532: RNCC: 3 | RNVC: 2
20322532: RNCC: 5 | RNVC: 9

4 Feb 1993

5340-14-424-4399
Angle Bracket

144244399
79096847: RNCC: 3 | RNVC: 2
79096847: RNCC: 5 | RNVC: 9

19 May 1988

5340-14-031-1338
Mending Plate

140311338
52888: RNCC: 3 | RNVC: 2
VDPM02750: RNCC: 5 | RNVC: 2

14 Jun 1980

5340-14-361-3495
Loop Clamp

143613495
AC50: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-474-7804
Butt Hinge

144747804
51391: RNCC: 3 | RNVC: 2

1 Mar 1995

5340-14-550-3440
Angle Bracket

145503440
2716411400: RNCC: 3 | RNVC: 2

16 Jun 2006

5340-14-479-8091
Access Cover

144798091
006P668: RNCC: 3 | RNVC: 2
1117424T00: RNCC: 5 | RNVC: 2
006P668: RNCC: 5 | RNVC: 9

7 Feb 1996

5340-14-549-6700
Access Cover

145496700
2716287700: RNCC: 3 | RNVC: 2

26 Apr 2006

5340-14-343-1289
Access Cover

143431289
196528: RNCC: 3 | RNVC: 2

16 Jun 1977

5340-14-416-0749
Access Cover

144160749
897893M93: RNCC: 3 | RNVC: 2
897893M93: RNCC: 5 | RNVC: 9

3 Jun 1987

5340-14-485-1419
Mounting Plate

144851419
38512427: RNCC: 3 | RNVC: 2
38512427: RNCC: 5 | RNVC: 9

10 Jan 1997

5340-14-423-5409
Rod End Clevis

144235409
DA1N275710012: RNCC: 3 | RNVC: 2

21 Apr 1988

5340-14-304-0086
Rod End Clevis

143040086
A0120BB2BREP6: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-508-0586
Mounting Bracket

145080586
4769701010: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-520-1436
Utility Access Door

145201436
52743: RNCC: 3 | RNVC: 2
SDM52743: RNCC: 5 | RNVC: 9

16 May 2000

5340-14-550-4842
Mounting Bracket

145504842
RA1A702726027: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-439-1849
Access Cover

144391849
16008672: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-553-9659
Access Cover

145539659
10660708: RNCC: 3 | RNVC: 2

5 Jun 2007

5340-14-502-3049
Access Cover

145023049
1030921114: RNCC: 3 | RNVC: 2
1030921114: RNCC: 5 | RNVC: 2

9 Dec 1997

5340-14-505-8984
Mounting Plate

145058984
224010: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-370-7859
Anchor Strap

143707859
0000790824: RNCC: 3 | RNVC: 2
0000790872: RNCC: 5 | RNVC: 2
0000790824: RNCC: 5 | RNVC: 9
0000790872: RNCC: 5 | RNVC: 9
790824: RNCC: 5 | RNVC: 9
790872: RNCC: 5 | RNVC: 9

5 Jun 1981

5340-14-560-7665
Utility Access Door

145607665
10685162000: RNCC: 3 | RNVC: 2

25 May 2009

5340-14-395-3079
Webbing Strap

143953079
655RE32: RNCC: 3 | RNVC: 9

2 Oct 1984

5340-14-375-9294
Anchor Strap

143759294
136-411: RNCC: 3 | RNVC: 2

30 Mar 1982

5340-14-404-6603
Access Cover

144046603
5171718600: RNCC: 3 | RNVC: 2
717186: RNCC: 5 | RNVC: 2

20 Nov 1985

5340-14-543-3642
Mounting Plate

145433642
213315: RNCC: 3 | RNVC: 2

22 Oct 2004

5340-14-560-4735
Utility Resilient Mount

145604735
5442660000: RNCC: 3 | RNVC: 2
IEX544266B: RNCC: 5 | RNVC: 2

22 Apr 2009

5340-14-512-5040
Mounting Plate

145125040
PLAQU00391A00: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-518-0813
Handle Grip

145180813
1107461L01: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-402-0442
Retaining Strap

144020442
219862: RNCC: 3 | RNVC: 2

26 Jun 1985

5340-14-380-1191
Retaining Strap

143801191
BBZ2281: RNCC: 3 | RNVC: 2

8 Nov 1982

5340-14-463-0157
Angle Bracket

144630157
584433: RNCC: 3 | RNVC: 2
584433: RNCC: 5 | RNVC: 9

12 May 1993

5340-14-544-9493
Mounting Bracket

145449493
82073376000: RNCC: 3 | RNVC: 2

7 Mar 2005

5340-14-397-1258
Chassis Base

143971258
20321000: RNCC: 3 | RNVC: 2
20321000: RNCC: 5 | RNVC: 9

1 Dec 1984

5340-14-446-7109
Mounting Plate

144467109
16316560: RNCC: 3 | RNVC: 2
16316560: RNCC: 5 | RNVC: 9

9 Apr 1991

5340-14-544-2323
Webbing Strap

145442323
1SH41816154: RNCC: 3 | RNVC: 2

12 Jan 2005

5340-14-508-0851
Door Hook

145080851
4SH10560012: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-368-6443
Runner

143686443
CZ1621: RNCC: 3 | RNVC: 2

20 Feb 1981

5340-14-545-8039
Mounting Bracket

145458039
10547594: RNCC: 3 | RNVC: 2

16 May 2005

5340-14-492-4592
Mounting Plate

144924592
5000663127: RNCC: 3 | RNVC: 2
F300 0T 007 6939: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-404-7305
Mending Plate

144047305
39049325: RNCC: 3 | RNVC: 2

20 Nov 1985

5340-14-368-3737
Protection Bellows

143683737
H116250: RNCC: 3 | RNVC: 2
89254989: RNCC: 5 | RNVC: 2
H116250: RNCC: 6 | RNVC: 9

20 Feb 1981

5340-14-463-8732
Loop Clamp

144638732
166034: RNCC: 3 | RNVC: 2
89170145: RNCC: 5 | RNVC: 2

30 Jun 1993

5340-14-549-0871
Angle Bracket

145490871
RA1M704865841N1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-393-5572
Angle Bracket

143935572
254486: RNCC: 3 | RNVC: 2
254486: RNCC: 5 | RNVC: 9

7 Apr 1984

5340-14-520-2217
Mounting Bracket

145202217
P606642: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-457-6161
Retaining Strap

144576161
PM1A888200401: RNCC: 3 | RNVC: 2
PM1A888200401: RNCC: 5 | RNVC: 2

10 Sep 1992

5340-14-539-9488
Bumper

145399488
5140855200: RNCC: 3 | RNVC: 2
5406805T00: RNCC: 5 | RNVC: 2

25 Feb 2004

5340-14-446-6796
Butt Hinge

144466796
ST406M28P11E57: RNCC: 3 | RNVC: 2

9 Apr 1991

5340-14-548-4376
Runner

145484376
TR97204: RNCC: 3 | RNVC: 2

17 Jan 2006

5340-14-548-3981
Loop Clamp

145483981
EN4114F06WR1: RNCC: 2 | RNVC: 2

12 Jan 2006

5340-14-520-0618
Mounting Plate

145200618
T257A0002212: RNCC: 3 | RNVC: 2

10 May 2000

5340-14-415-6562
Threaded Rod End

144156562
MLA1470042: RNCC: 3 | RNVC: 2
MLA1470042: RNCC: 5 | RNVC: 2

18 May 1987

5340-14-278-5283
Angle Bracket

142785283
6062: RNCC: 3 | RNVC: 2
6062: RNCC: 5 | RNVC: 2
CHR6062: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-432-4177
Protection Bellows

144324177
0V600044A31: RNCC: 3 | RNVC: 2

12 Jun 1989

5340-14-377-9865
Retaining Band

143779865
063V34-108-23: RNCC: 3 | RNVC: 2

23 Aug 2000

5340-14-528-3845
Butt Hinge

145283845
01708425: RNCC: 3 | RNVC: 2

24 Jan 2002

5340-14-483-7468
Snap Hook

144837468
MAI110: RNCC: 3 | RNVC: 2

2 Oct 1996

5340-14-389-9983
Mounting Plate

143899983
0000157978: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-14-371-1371
Angle Bracket

143711371
A11A231472090: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-463-5511
Webbing Strap

144635511
20006: RNCC: 3 | RNVC: 9
5001008095: RNCC: 5 | RNVC: 2
89120: RNCC: 5 | RNVC: 9

17 Jun 1993

5340-14-377-0988
Roller Holder

143770988
16558520: RNCC: 3 | RNVC: 2
16558520: RNCC: 5 | RNVC: 9

17 May 1982

5340-14-482-1040
Angle Bracket

144821040
22636687: RNCC: 3 | RNVC: 2
22636687: RNCC: 5 | RNVC: 9

20 Jun 1996

5340-14-406-1467
Retaining Band

144061467
H109090: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-438-8646
Access Cover

144388646
TB3030309: RNCC: 3 | RNVC: 2

10 Apr 1990

5340-14-494-0262
Mounting Bracket

144940262
30170002: RNCC: 3 | RNVC: 2
F300 0T 015 0886: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-433-8553
Butt Hinge

144338553
557224: RNCC: 3 | RNVC: 2

17 Aug 1989

5340-14-476-7651
Door Hook

144767651
01VEAL0601: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-14-438-1928
Cover Strip

144381928
PM1A121212104: RNCC: 3 | RNVC: 2
PM1A121212104: RNCC: 5 | RNVC: 2

7 Mar 1990

5340-14-448-2604
Bow Handle

144482604
319144: RNCC: 3 | RNVC: 2
319144: RNCC: 5 | RNVC: 9

18 Jun 1991

5340-14-549-7780
Mounting Bracket

145497780
216386-0: RNCC: 3 | RNVC: 2

11 May 2006

5340-14-263-3607
Synchro Clamp

142633607
R109859: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-362-5123
Bow Handle

143625123
F2031712: RNCC: 3 | RNVC: 2
F2031712: RNCC: 5 | RNVC: 9

19 Mar 1980

5340-14-524-2309
Access Cover

145242309
8017070B00: RNCC: 3 | RNVC: 2

7 Mar 2001

5340-14-550-9217
Angle Bracket

145509217
RA1B701996221: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-351-5265
Angle Bracket

143515265
A7271: RNCC: 3 | RNVC: 2

12 Sep 1978

5340-14-306-2862
Plug Button

143062862
000-0764: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-483-3566
Bow Handle

144833566
FD93: RNCC: 3 | RNVC: 9

5 Sep 1996

5340-14-493-6789
Rod End Clevis

144936789
443 851 IND.0: RNCC: 3 | RNVC: 2

8 Oct 1997

5340-14-509-0002
Elbow Catch

145090002
500506: RNCC: 3 | RNVC: 2

14 Oct 1998

5340-14-340-7851
Runner

143407851
401MA032-G-82SYM: RNCC: 3 | RNVC: 2

8 Feb 2001

5340-14-352-6676
Locking Stay

143526676
74200D200: RNCC: 3 | RNVC: 2
5000242136: RNCC: 5 | RNVC: 2
5000242136: RNCC: 5 | RNVC: 9

14 Nov 1978

5340-14-266-3993
Pad Eye

142663993
154531: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-388-4488
Rod End Connector

143884488
01102005300: RNCC: 3 | RNVC: 2
011020053: RNCC: 5 | RNVC: 2

3 Nov 1983

5340-14-372-0914
Anchor Strap

143720914
F107522: RNCC: 3 | RNVC: 2

1 Sep 1981

5340-14-516-6809
Mounting Bracket

145166809
46944825: RNCC: 3 | RNVC: 2

12 Oct 1999

5340-14-411-5046
Rim Lock

144115046
314044GAUCHE: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-430-5266
Butt Hinge

144305266
PM1A127232012: RNCC: 3 | RNVC: 2
PM1A127232012: RNCC: 5 | RNVC: 2

22 Mar 1989

5340-14-469-3941
Retaining Bail

144693941
265252: RNCC: 3 | RNVC: 2

20 Apr 1994

5340-14-478-7257
Mounting Plate

144787257
45271756: RNCC: 3 | RNVC: 2
45271756: RNCC: 5 | RNVC: 9

20 Nov 1995

5340-14-538-3209
Vent Plug

145383209
NGM0010035824614: RNCC: 2 | RNVC: 2

9 Dec 2003

5340-14-360-1630
Angle Bracket

143601630
A11A221172950A1: RNCC: 3 | RNVC: 2

31 Oct 1979

5340-14-547-7332
Mounting Bracket

145477332
PCI310C-TUBE: RNCC: 3 | RNVC: 2

8 Nov 2005

5340-14-434-6483
Runner

144346483
G60: RNCC: 3 | RNVC: 2

27 Sep 1989

5340-14-554-1479
Utility Access Door

145541479
82050421001: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-14-502-6871
Mounting Bracket

145026871
1014657: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-497-4124
Mounting Plate

144974124
1027000: RNCC: 3 | RNVC: 2
1027000: RNCC: 5 | RNVC: 2
F300 0T 023 1420: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-345-0563
Buckle

143450563
154263: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-535-9680
Mounting Bracket

145359680
400835: RNCC: 3 | RNVC: 2

2 Jul 2003

5340-14-504-2437
Mounting Bracket

145042437
3595866M91: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-386-0075
Retaining Clip

143860075
55916012: RNCC: 3 | RNVC: 2
1408-38: RNCC: 5 | RNVC: 2

24 Aug 1983

5340-14-250-4595
Loop Clamp

142504595
ST406M52P611: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-500-3841
Mounting Plate

145003841
D62102300013: RNCC: 3 | RNVC: 2
F300 0T 024 3942: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-462-6981
Access Cover

144626981
161439: RNCC: 3 | RNVC: 2
89169804: RNCC: 5 | RNVC: 2

28 Apr 1993

Load More Results