What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 92 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 92 of 446

5340-14-272-5969
Pipe Hanger

142725969
160-11522-13: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-366-9266
Access Cover

143669266
960-038-022-0: RNCC: 3 | RNVC: 2
VDPM03028: RNCC: 5 | RNVC: 2

11 Dec 1980

5340-14-528-1519
Mounting Bracket

145281519
B14DE2050-036: RNCC: 3 | RNVC: 2

4 Jan 2002

5340-14-549-8887
Access Cover

145498887
2092555: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-381-2956
Anchor Strap

143812956
601666: RNCC: 3 | RNVC: 2
00601666: RNCC: 5 | RNVC: 2
601404: RNCC: 5 | RNVC: 2

25 Jan 1983

5340-14-525-8609
Access Cover

145258609
39072970: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-516-3672
Mounting Bracket

145163672
CV19118: RNCC: 3 | RNVC: 2

22 Sep 1999

5340-14-512-0261
Access Cover

145120261
0053310: RNCC: 3 | RNVC: 2
98453822: RNCC: 3 | RNVC: 9

3 Feb 1999

5340-14-419-0850
Compression Cup

144190850
VK5008T: RNCC: 3 | RNVC: 2
VK5008B: RNCC: 5 | RNVC: 2

30 Sep 1987

5340-14-554-9429
Loop Clamp

145549429
78651DH32AG: RNCC: 1 | RNVC: 2
78651DH32AG: RNCC: 3 | RNVC: 2

11 Sep 2007

5340-14-455-5972
Mounting Plate

144555972
39360628: RNCC: 3 | RNVC: 9

28 May 1992

5340-14-455-7361
Mounting Bracket

144557361
145474000: RNCC: 3 | RNVC: 2
1454740000000: RNCC: 5 | RNVC: 2
145474000: RNCC: 5 | RNVC: 2
5000289595: RNCC: 5 | RNVC: 2
145474000: RNCC: 5 | RNVC: 9

11 Jun 1992

5340-14-511-0799
Angle Bracket

145110799
0006027: RNCC: 3 | RNVC: 2

2 Dec 1998

5340-14-550-5006
Mounting Bracket

145505006
9428PHC161010: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-455-9059
Plate Spacer

144559059
PM1A726269006: RNCC: 3 | RNVC: 2
PM1A726269006: RNCC: 5 | RNVC: 2

11 Jun 1992

5340-14-442-7077
Cover Strip

144427077
121S23-611-81-0: RNCC: 3 | RNVC: 2

24 Oct 1990

5340-14-547-7782
Mounting Bracket

145477782
5010636767: RNCC: 3 | RNVC: 2

12 Nov 2005

5340-14-430-6725
Loop Clamp

144306725
PM1A594100071: RNCC: 3 | RNVC: 2
PM1A594100071: RNCC: 5 | RNVC: 2

22 Mar 1989

5340-14-541-4635
Cane Bolt

145414635
1SH41771331: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-459-4598
Angle Bracket

144594598
LN400011F8REPB4: RNCC: 3 | RNVC: 2
LN400011F4REPB4: RNCC: 5 | RNVC: 2

1 Dec 1992

5340-14-359-6862
Quick Release Pin

143596862
GDL0012: RNCC: 3 | RNVC: 2

15 Oct 1979

5340-14-548-6097
Pipe Hanger

145486097
RA1B70220831A1N1: RNCC: 3 | RNVC: 2

27 Jan 2006

5340-14-542-2523
Pawl Fastener

145422523
704259508: RNCC: 3 | RNVC: 2
704259508: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-043-1663
Access Cover

140431663
29505788: RNCC: 3 | RNVC: 2

10 Apr 1984

5340-14-313-7142
Mounting Bracket

143137142
0243858060: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-524-3520
Plug Button

145243520
SD001PD011203: RNCC: 3 | RNVC: 2

14 Mar 2001

5340-14-524-6565
Access Cover

145246565
504343: RNCC: 3 | RNVC: 2

3 Apr 2001

5340-14-350-4425
Rod End Clevis

143504425
190573: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-543-4794
Access Cover

145434794
103043009001A: RNCC: 3 | RNVC: 9

9 Nov 2004

5340-14-555-2165
Angle Bracket

145552165
RA1N701246017N1: RNCC: 3 | RNVC: 2

10 Oct 2007

5340-14-407-7490
Expansion Shield

144077490
VERTE35: RNCC: 3 | RNVC: 9

3 Mar 1986

5340-14-423-9485
Anchor Strap

144239485
535896: RNCC: 3 | RNVC: 2

5 May 1988

5340-14-535-1536
Access Cover

145351536
5000604314: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-380-1144
Anchor Strap

143801144
BBZ0467: RNCC: 3 | RNVC: 2

8 Nov 1982

5340-14-454-8826
Mounting Bracket

144548826
5000736108: RNCC: 3 | RNVC: 2

24 Apr 1992

5340-14-414-0080
Access Cover

144140080
237217: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-396-0053
Anchor Strap

143960053
0000790074: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-437-0976
Rod End Clevis

144370976
RK4D5JF87: RNCC: 3 | RNVC: 2

17 Jan 1990

5340-14-237-5246
Access Cover

142375246
70808615: RNCC: 3 | RNVC: 2
801B217: RNCC: 5 | RNVC: 2
70808615: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-521-6781
Clamping Catch

145216781
970417: RNCC: 3 | RNVC: 2

4 Sep 2000

5340-14-520-2902
Mounting Bracket

145202902
DAV19514: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-435-5153
Cover Strip

144355153
DA1D230328003A1: RNCC: 3 | RNVC: 2

8 Nov 1989

5340-14-237-8215
Rod End Clevis

142378215
A63857: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-403-4676
Access Cover

144034676
22447000: RNCC: 3 | RNVC: 2
22447000: RNCC: 5 | RNVC: 9

21 Aug 1985

5340-14-412-1748
Anchor Strap

144121748
235604: RNCC: 3 | RNVC: 2

8 Oct 1986

5340-14-418-1334
Access Cover

144181334
059623E01TRA: RNCC: 3 | RNVC: 2
059623E: RNCC: 5 | RNVC: 2

6 Aug 1987

5340-14-536-6751
Mounting Bracket

145366751
47087355: RNCC: 3 | RNVC: 2

10 Sep 2003

5340-14-525-7836
Utility Access Door

145257836
F117782: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-402-9794
Mounting Plate

144029794
29739060: RNCC: 3 | RNVC: 2
29739060: RNCC: 5 | RNVC: 9

25 Jul 1985

5340-14-547-9754
Angle Bracket

145479754
RA1M701346305A1: RNCC: 3 | RNVC: 2

30 Nov 2005

5340-14-376-4689
Mounting Plate

143764689
16559347: RNCC: 3 | RNVC: 2
16559347: RNCC: 5 | RNVC: 9

28 Apr 1982

5340-14-423-6937
Anchor Strap

144236937
2101334: RNCC: 3 | RNVC: 2
5000803991: RNCC: 5 | RNVC: 2
101334Z: RNCC: 5 | RNVC: 9

27 Apr 1988

5340-14-469-0767
Access Cover

144690767
45189131: RNCC: 3 | RNVC: 2
45189131: RNCC: 5 | RNVC: 9

6 Apr 1994

5340-14-360-3737
Access Cover

143603737
69394: RNCC: 3 | RNVC: 2

23 Nov 1979

5340-14-291-1836
Access Cover

142911836
44782: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-555-7908
Access Cover

145557908
0210140140: RNCC: 3 | RNVC: 2

14 Dec 2007

5340-14-493-6824
Mounting Plate

144936824
343 787 IND.2: RNCC: 3 | RNVC: 2

8 Oct 1997

5340-14-298-8540
Retaining Clip

142988540
26249481: RNCC: 3 | RNVC: 2
26249481: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-457-6180
Block Clamp

144576180
PM1A746654003: RNCC: 3 | RNVC: 2
PM1A746654003: RNCC: 5 | RNVC: 2

10 Sep 1992

5340-14-479-0709
Retaining Strap

144790709
23243535-8: RNCC: 3 | RNVC: 2

13 Dec 1995

5340-14-543-7502
Loop Clamp

145437502
9413365: RNCC: 3 | RNVC: 2

9 Dec 2004

5340-14-523-6605
Bumper

145236605
G5241407: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-14-479-0712
Retaining Strap

144790712
23244112-9: RNCC: 3 | RNVC: 2

13 Dec 1995

5340-14-554-1737
Mounting Bracket

145541737
82055071001: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-14-459-3784
Section Block Clamp

144593784
16787429: RNCC: 3 | RNVC: 2
16787429: RNCC: 5 | RNVC: 9

26 Nov 1992

5340-14-531-1305
Mounting Bracket

145311305
10512349: RNCC: 3 | RNVC: 2

24 Jul 2002

5340-14-530-5724
Cable Retractor

145305724
P045N007: RNCC: 3 | RNVC: 2

25 Jun 2002

5340-14-460-0485
Loop Clamp

144600485
AMLP100X2: RNCC: 3 | RNVC: 2

7 Jan 1993

5340-14-417-6137
Mortise Lock Set

144176137
5275DROITE: RNCC: 3 | RNVC: 2

21 Jul 1987

5340-14-399-2782
Eye Hook

143992782
A11A767521200A1: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-266-1205
Eye Hook

142661205
40469-2: RNCC: 3 | RNVC: 2
40469D2: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-371-6010
Loop Clamp

143716010
511119050171: RNCC: 3 | RNVC: 2
35P17: RNCC: 5 | RNVC: 2

5 Aug 1981

5340-14-471-9664
Angle Bracket

144719664
P02705: RNCC: 3 | RNVC: 2

28 Sep 1994

5340-14-458-5195
Shelf Bracket

144585195
16283346: RNCC: 3 | RNVC: 2

23 Oct 1992

5340-14-413-1610
Mending Plate

144131610
144095: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-14-462-6816
Mounting Bracket

144626816
008568489: RNCC: 3 | RNVC: 9
8568489: RNCC: 5 | RNVC: 9

28 Apr 1993

5340-14-522-6018
Loop Clamp

145226018
3656P002: RNCC: 3 | RNVC: 2

8 Nov 2000

5340-14-497-4629
Protection Bellows

144974629
950424INDA: RNCC: 3 | RNVC: 2
F300 0T 023 2212: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-515-2717
Loop Clamp

145152717
0116 6353: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-14-325-9133
Key Blank

143259133
25511B11X18XC38: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-531-1484
Loop Clamp

145311484
TB4011017: RNCC: 3 | RNVC: 2

24 Jul 2002

5340-14-449-2796
Mounting Bracket

144492796
385511J: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-14-520-1669
Mounting Plate

145201669
20856416: RNCC: 3 | RNVC: 2
20856416: RNCC: 3 | RNVC: 9

17 May 2000

5340-14-506-2961
Angle Bracket

145062961
38511741: RNCC: 3 | RNVC: 2
38511741: RNCC: 5 | RNVC: 9

22 Apr 1998

5340-14-344-6106
Angle Bracket

143446106
11-584-600: RNCC: 3 | RNVC: 2
11-584-600: RNCC: 5 | RNVC: 9

9 Sep 1977

5340-14-459-7303
Cover Strip

144597303
LN321022REP10JAG3: RNCC: 3 | RNVC: 2
RAB0172: RNCC: 5 | RNVC: 2

15 Dec 1992

5340-14-463-0500
Mounting Bracket

144630500
2MD110N53-58: RNCC: 3 | RNVC: 9

14 May 1993

5340-14-543-3164
Mounting Bracket

145433164
475072: RNCC: 3 | RNVC: 2

20 Oct 2004

5340-14-549-9632
Corner Brace

145499632
F1260532: RNCC: 3 | RNVC: 2

19 May 2006

5340-14-392-9598
Angle Bracket

143929598
5000714749: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-323-8383
Clamping Catch

143238383
GP10IB: RNCC: 3 | RNVC: 2
0232520X00: RNCC: 5 | RNVC: 2
01417865: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-522-7076
Mounting Bracket

145227076
F00133840: RNCC: 3 | RNVC: 2

15 Nov 2000

5340-14-444-9032
Retaining Strap

144449032
TB3050604: RNCC: 3 | RNVC: 2
708896: RNCC: 5 | RNVC: 9

28 Jan 1991

5340-14-545-6919
Pipe Hanger

145456919
RA1A703836135: RNCC: 3 | RNVC: 2

27 Apr 2005

5340-14-518-9773
Mounting Bracket

145189773
645724: RNCC: 3 | RNVC: 2

1 Mar 2000

5340-14-505-7541
Mounting Plate

145057541
16391384: RNCC: 3 | RNVC: 9
16391384: RNCC: 5 | RNVC: 2

26 Mar 1998

5340-14-402-6832
Swivel Caster

144026832
20RLB8100: RNCC: 3 | RNVC: 9
RAS20RLB8100: RNCC: 5 | RNVC: 9

19 Jul 1985

5340-14-375-2742
Loop Clamp

143752742
163164-27: RNCC: 3 | RNVC: 9
16316427: RNCC: 5 | RNVC: 9

26 Feb 1982

5340-14-361-7877
Swivel Caster

143617877
SP2PR080-23L26: RNCC: 3 | RNVC: 2
SD3BR80-33LP26: RNCC: 5 | RNVC: 2

20 Feb 1980

5340-14-336-8081
Access Cover

143368081
NO PRIMARY REF14-336-8081: RNCC: 3 | RNVC: 2
13321290: RNCC: 5 | RNVC: 9

7 Oct 1976

5340-14-501-6348
Rim Lock

145016348
45282641: RNCC: 3 | RNVC: 2
45282641: RNCC: 3 | RNVC: 9

5 Nov 1997

5340-14-297-7140
Access Cover

142977140
773-413-048FF12: RNCC: 3 | RNVC: 2
773-413-048FF12: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-394-7224
Rim Lock Set

143947224
NO PRIMARY REF14-394-7224: RNCC: 3 | RNVC: 2
6600-04FE009: RNCC: 5 | RNVC: 9

28 Aug 1984

5340-14-543-7660
Loop Clamp

145437660
0050045: RNCC: 3 | RNVC: 2
50045: RNCC: 5 | RNVC: 2

9 Dec 2004

5340-14-549-8677
Bridge Clamp

145498677
2093183: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-275-1358
Mending Plate

142751358
NO PRIMARY REF14-275-1358: RNCC: 3 | RNVC: 2
03-743480: RNCC: 5 | RNVC: 2
133490: RNCC: 5 | RNVC: 9

1 Jan 1971

5340-14-383-5297
Access Cover

143835297
18606439: RNCC: 3 | RNVC: 2
18606439: RNCC: 5 | RNVC: 2

11 Apr 1983

5340-14-520-8942
Utility Access Door

145208942
POR-Q01897X0V: RNCC: 3 | RNVC: 2

21 Jun 2000

5340-14-518-8817
Cover Strip

145188817
332A81-0497-25: RNCC: 3 | RNVC: 2

23 Feb 2000

5340-14-473-8166
Mounting Plate

144738166
332A23-0525-20: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-502-5374
Loop Clamp

145025374
5000810619: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-537-9033
Mounting Bracket

145379033
10217544: RNCC: 3 | RNVC: 2

3 Dec 2003

5340-14-539-3106
Bow Handle

145393106
T632G6005223: RNCC: 3 | RNVC: 2

22 Dec 2003

5340-14-526-1357
Access Cover

145261357
K104206: RNCC: 3 | RNVC: 2

4 Jul 2001

5340-14-534-8511
Access Cover

145348511
10616823: RNCC: 3 | RNVC: 2

9 Apr 2003

5340-14-373-1787
Access Cover

143731787
309185: RNCC: 3 | RNVC: 2

21 Oct 1981

5340-14-408-5522
Bow Handle

144085522
9550129230: RNCC: 3 | RNVC: 2
91572302: RNCC: 5 | RNVC: 2

2 Apr 1986

5340-14-397-9745
Loop Clamp

143979745
242766: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-453-2947
Cushioning Pad

144532947
45614828: RNCC: 3 | RNVC: 9

12 Feb 1992

5340-14-308-7368
Access Cover

143087368
4033536: RNCC: 3 | RNVC: 2
505CX7682: RNCC: 5 | RNVC: 2
SY2275: RNCC: 5 | RNVC: 2
4033536: RNCC: 5 | RNVC: 9
SY2275: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-366-8299
Retaining Strap

143668299
15173459: RNCC: 3 | RNVC: 2
15173459: RNCC: 5 | RNVC: 2
15173459: RNCC: 5 | RNVC: 9

20 Nov 1980

5340-14-553-2384
Mounting Bracket

145532384
0027750: RNCC: 3 | RNVC: 2

16 Mar 2007

5340-14-370-7155
Anchor Strap

143707155
217938: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-551-2824
Mounting Bracket

145512824
RA1M702316035: RNCC: 3 | RNVC: 2

8 Sep 2006

5340-14-266-3120
Retaining Strap

142663120
155996: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-339-2964
Access Cover

143392964
164082: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-484-6611
Bow Handle

144846611
29404919: RNCC: 3 | RNVC: 2

28 Nov 1996

5340-14-529-3543
Rod End Clevis

145293543
633047: RNCC: 3 | RNVC: 2
633047: RNCC: 5 | RNVC: 9

22 Mar 2002

5340-14-525-8448
Mounting Plate

145258448
N135214: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-553-4815
Mounting Plate

145534815
0319771410: RNCC: 3 | RNVC: 2

5 Apr 2007

5340-14-540-4308
Shimmy Damper

145404308
712546: RNCC: 3 | RNVC: 2

25 Mar 2004

5340-14-555-8725
Mounting Plate

145558725
L642A2036201: RNCC: 3 | RNVC: 2

20 Dec 2007

5340-14-340-8852
Key Blank

143408852
60X110X900ACB165TRAITE: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-518-7437
Synchro Clamp

145187437
0177810250: RNCC: 3 | RNVC: 2

16 Feb 2000

5340-14-404-5507
Rod End Clevis

144045507
006092080P: RNCC: 3 | RNVC: 2

20 Nov 1985

5340-14-481-2328
Protection Bellows

144812328
10128477: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-14-453-1559
Access Cover

144531559
16283487: RNCC: 3 | RNVC: 2

5 Feb 1992

5340-14-395-3502
Control Rod

143953502
0010121337A260: RNCC: 3 | RNVC: 2
1-250/257-121: RNCC: 3 | RNVC: 9
1-250-257-121: RNCC: 5 | RNVC: 9

2 Oct 1984

5340-14-530-4877
Fusible Plug

145304877
060342: RNCC: 3 | RNVC: 2
SYB5130: RNCC: 5 | RNVC: 2

17 Jun 2002

5340-14-519-0882
Mounting Bracket

145190882
1SH41720132: RNCC: 3 | RNVC: 2

7 Mar 2000

5340-14-508-0539
Mounting Bracket

145080539
46240292: RNCC: 3 | RNVC: 2
46240292: RNCC: 5 | RNVC: 9

26 Aug 1998

5340-14-399-7596
Webbing Strap

143997596
4-444-00P05-02U1,3M: RNCC: 3 | RNVC: 2

14 Mar 1985

5340-14-487-6467
Synchro Clamp

144876467
51290: RNCC: 3 | RNVC: 2

18 Apr 1997

5340-14-040-6191
Loop Clamp

140406191
511119050082: RNCC: 3 | RNVC: 2
55P8: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-466-9981
Bow Handle

144669981
76991-70: RNCC: 3 | RNVC: 2

14 Dec 1993

5340-14-390-9648
Flush Lock

143909648
NO PRIMARY REF 14-390-9648: RNCC: 3 | RNVC: 2
5-620-001: RNCC: 5 | RNVC: 9

1 Mar 1984

5340-14-289-6006
Rod End Connector

142896006
121E27-175-13-0: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-357-1273
Loop Clamp

143571273
220-000-18470: RNCC: 3 | RNVC: 2
613-988-558-0: RNCC: 5 | RNVC: 2

7 Jun 1979

5340-14-330-4062
Access Cover

143304062
0915-104-000: RNCC: 3 | RNVC: 2
0915-104: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-314-5648
Angle Bracket

143145648
121S63-108-02-0: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-361-2434
Retaining Strap

143612434
D10234-34: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-14-379-0826
Snap Hook

143790826
4250X120-28: RNCC: 3 | RNVC: 2
9560133110: RNCC: 5 | RNVC: 2

6 Sep 1982

5340-14-524-2122
Bridge Clamp

145242122
ST159-2M881-P23: RNCC: 3 | RNVC: 2

7 Mar 2001

5340-14-503-0000
Rod End Connector

145030000
330A22-2483-00: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-359-9614
Quick Release Pin

143599614
5001BTV1040804: RNCC: 3 | RNVC: 2
5001BTV10-40-804: RNCC: 5 | RNVC: 2

31 Oct 1979

5340-14-443-6264
Bridge Clamp

144436264
NO PRIMARY REF14-443-6264: RNCC: 3 | RNVC: 2
22504206: RNCC: 5 | RNVC: 9

30 Nov 1990

5340-14-389-4435
Mounting Plate

143894435
365A35-1011-2801: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-14-355-2015
Loop Clamp

143552015
PAA73-10-002-34: RNCC: 3 | RNVC: 2

19 Mar 1979

5340-14-517-0424
Angle Bracket

145170424
309-073-901-0: RNCC: 3 | RNVC: 2

28 Oct 1999

5340-14-379-6995
Bumper

143796995
888033: RNCC: 3 | RNVC: 2
088033: RNCC: 5 | RNVC: 2

20 Oct 1982

5340-14-542-2379
Loop Clamp

145422379
602008308: RNCC: 3 | RNVC: 2
602008308: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-498-4547
Metal Grille

144984547
91966419: RNCC: 3 | RNVC: 2
111-745X240: RNCC: 3 | RNVC: 2
F300 0T 005 1475: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-506-2674
Mounting Bracket

145062674
11214001: RNCC: 3 | RNVC: 9
531200: RNCC: 5 | RNVC: 9

17 Apr 1998

5340-14-542-2963
Angle Bracket

145422963
970764108: RNCC: 3 | RNVC: 2
970764108: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-223-9975
Mending Plate

142239975
M062204: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-344-2498
Angle Bracket

143442498
26926: RNCC: 3 | RNVC: 2

10 Aug 1977

5340-14-505-0873
Access Cover

145050873
01503000: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-431-8557
Rod End Clevis

144318557
0CV0186801: RNCC: 3 | RNVC: 2

10 May 1989

5340-14-551-0310
Retaining Strap

145510310
7420805342: RNCC: 3 | RNVC: 2

22 Aug 2006

5340-14-478-8228
Strap Hinge

144788228
96095: RNCC: 3 | RNVC: 2

22 Nov 1995

5340-14-497-8973
Access Cover

144978973
0174040600: RNCC: 3 | RNVC: 2

22 Oct 1997

5340-14-546-4623
Loop Clamp

145464623
5010571730: RNCC: 3 | RNVC: 2

6 Jul 2005

5340-14-469-3866
Mounting Plate

144693866
161160: RNCC: 3 | RNVC: 2
89169758: RNCC: 5 | RNVC: 2

20 Apr 1994

5340-14-324-5951
Retaining Strap

143245951
M122028: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-423-2608
Loop Clamp

144232608
1206359300: RNCC: 3 | RNVC: 2
63593: RNCC: 5 | RNVC: 2

14 Apr 1988

5340-14-434-5650
Butt Hinge

144345650
DA2C183317722: RNCC: 3 | RNVC: 2

20 Sep 1989

5340-14-526-8717
Mounting Bracket

145268717
1SH41784480: RNCC: 3 | RNVC: 2

12 Sep 2001

5340-14-408-6290
Rod End Clevis

144086290
160G202047: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-14-392-1955
Access Cover

143921955
29502855: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-14-519-2739
Runner

145192739
K2076528: RNCC: 3 | RNVC: 2

15 Mar 2000

5340-14-403-4116
Bumper

144034116
ST406M75P251: RNCC: 3 | RNVC: 2
BJQM75P251: RNCC: 5 | RNVC: 2

21 Aug 1985

5340-14-518-7568
Loop Clamp

145187568
EN4113V10NH: RNCC: 2 | RNVC: 2
EN4113V10H: RNCC: 5 | RNVC: 9

16 Feb 2000

5340-14-396-0643
Retaining Strap

143960643
VDPV4529: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-434-0037
Mounting Plate

144340037
545476: RNCC: 3 | RNVC: 2

29 Aug 1989

5340-14-447-3150
Butt Hinge

144473150
173796: RNCC: 3 | RNVC: 2

15 May 1991

5340-14-349-1393
Loop Clamp

143491393
51319905012: RNCC: 3 | RNVC: 2
21T12: RNCC: 5 | RNVC: 2

19 Apr 1978

5340-14-466-1729
Mounting Bracket

144661729
164866: RNCC: 3 | RNVC: 2
89170060: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-14-428-2139
Retaining Strap

144282139
ETD037055011020: RNCC: 3 | RNVC: 2

7 Dec 1988

5340-14-489-9652
Access Cover

144899652
1057702N00: RNCC: 3 | RNVC: 2

3 Sep 1997

5340-14-524-3401
Loop Clamp

145243401
TX2010615: RNCC: 3 | RNVC: 2

14 Mar 2001

5340-14-543-9728
Mounting Bracket

145439728
4773126080: RNCC: 3 | RNVC: 9

19 Dec 2004

5340-14-526-4742
Loop Clamp

145264742
78647A095: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-510-9415
Mounting Plate

145109415
29486790: RNCC: 3 | RNVC: 2

24 Nov 1998

5340-14-461-2712
Mounting Bracket

144612712
4772920390: RNCC: 3 | RNVC: 2
5046038: RNCC: 5 | RNVC: 9

3 Mar 1993

5340-14-435-9352
Webbing Strap

144359352
CR001PD080020: RNCC: 3 | RNVC: 9

29 Nov 1989

5340-14-293-6992
Loop Clamp

142936992
16304534: RNCC: 3 | RNVC: 2
D16304534: RNCC: 3 | RNVC: 2
D16304534: RNCC: 3 | RNVC: 9
16304534: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-381-4880
Loop Clamp

143814880
5000275553: RNCC: 3 | RNVC: 2
06670620215: RNCC: 5 | RNVC: 2
5000275553: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-449-3857
Cover Strip

144493857
DA1N201732428: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-14-480-3756
Angle Bracket

144803756
35 55 29: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-427-4387
Retaining Clip

144274387
95608524: RNCC: 3 | RNVC: 2

19 Oct 1988

5340-14-538-7763
Handwheel

145387763
NGM0011040330025: RNCC: 2 | RNVC: 2

9 Dec 2003

5340-14-519-3605
Mounting Plate

145193605
C672A2114201: RNCC: 3 | RNVC: 2

15 Mar 2000

5340-14-505-0928
Loop Clamp

145050928
121794: RNCC: 3 | RNVC: 2

11 Mar 1998

5340-14-360-1902
Block Clamp

143601902
A11A704123030: RNCC: 3 | RNVC: 2

31 Oct 1979

5340-14-369-7883
Angle Bracket

143697883
A11A232752125: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-472-9649
Angle Bracket

144729649
3BM00889AAAA: RNCC: 3 | RNVC: 2
3BM00889AAAA: RNCC: 5 | RNVC: 9

23 Nov 1994

5340-14-551-2621
Mounting Bracket

145512621
S47081: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-550-4802
Angle Bracket

145504802
RA1A702606053: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-350-4325
Retaining Band

143504325
207032: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-379-4381
Angle Bracket

143794381
2206-323B504: RNCC: 3 | RNVC: 2

1 Oct 1982

5340-14-555-9948
Rod End Clevis

145559948
577M02004: RNCC: 3 | RNVC: 2

18 Jan 2008

5340-14-470-3269
Access Cover

144703269
202943: RNCC: 3 | RNVC: 2

15 Jun 1994

5340-14-319-7217
Access Cover

143197217
0172180280: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-483-4147
Access Cover

144834147
TOL00874: RNCC: 3 | RNVC: 2

12 Sep 1996

5340-14-485-7825
Mounting Plate

144857825
27134883-0: RNCC: 3 | RNVC: 2

12 Feb 1997

5340-14-528-8228
Access Cover

145288228
4643823B: RNCC: 3 | RNVC: 2

19 Feb 2002

5340-14-542-7719
Utility Access Door

145427719
8007430N00: RNCC: 3 | RNVC: 2

13 Aug 2004

5340-14-541-5225
Access Cover

145415225
1091534: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-380-4757
Anchor Strap

143804757
192800030: RNCC: 3 | RNVC: 2
22000607: RNCC: 5 | RNVC: 2
192800030: RNCC: 5 | RNVC: 2

29 Nov 1982

5340-14-501-6839
Mounting Plate

145016839
39259928: RNCC: 3 | RNVC: 2
39259928: RNCC: 3 | RNVC: 9

5 Nov 1997

5340-14-410-6569
Access Cover

144106569
400338: RNCC: 3 | RNVC: 2
BGE400338: RNCC: 5 | RNVC: 2

9 Jul 1986

5340-14-302-9020
Angle Bracket

143029020
773-418-567DET2: RNCC: 3 | RNVC: 2
773-418-567DET2: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-425-4796
Control Rod

144254796
0010216337A150: RNCC: 3 | RNVC: 2
1-150-216: RNCC: 3 | RNVC: 9

6 Jul 1988

5340-14-526-5214
Access Cover

145265214
GA66881: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-14-433-7680
Access Cover

144337680
10070: RNCC: 3 | RNVC: 2

9 Aug 1989

5340-14-450-2566
Friction Catch

144502566
LA1201: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-14-314-1402
Retaining Strap

143141402
PR5-5: RNCC: 3 | RNVC: 9

1 Jan 1974

5340-14-516-9590
Access Cover

145169590
10335416: RNCC: 3 | RNVC: 2

28 Oct 1999

5340-14-515-1562
Access Cover

145151562
35666584: RNCC: 3 | RNVC: 2

9 Jul 1999

5340-14-533-6308
Access Cover

145336308
D116211: RNCC: 3 | RNVC: 2

12 Feb 2003

5340-14-534-7477
Access Cover

145347477
45680662: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-14-546-7495
Loop Clamp

145467495
51313106018: RNCC: 3 | RNVC: 2
5131310618: RNCC: 3 | RNVC: 9
5010610338: RNCC: 5 | RNVC: 9

16 Aug 2005

5340-14-552-6975
Mounting Bracket

145526975
332A08-0950-34: RNCC: 3 | RNVC: 2

24 Jan 2007

5340-14-394-3061
Webbing Strap

143943061
NO PRIMARY REF14-394-3061: RNCC: 3 | RNVC: 2
7866-20X330: RNCC: 5 | RNVC: 2
M4ZS460D8462: RNCC: 5 | RNVC: 2

28 Aug 1984

5340-14-446-3212
Anchor Strap

144463212
5000603900: RNCC: 3 | RNVC: 2

13 Mar 1991

5340-14-284-1542
Control Rod

142841542
102179: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-313-3602
Access Cover

143133602
97700015: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-517-5259
Padlock Set

145175259
1322 ENSEMBLE 2 CADENAS: RNCC: 3 | RNVC: 2
995 010 011 001: RNCC: 6 | RNVC: 9

5 Jan 2000

5340-14-534-9125
Expansion Shield

145349125
SC030894: RNCC: 3 | RNVC: 2
206-9412-9: RNCC: 5 | RNVC: 9

16 Apr 2003

5340-14-519-5229
Loop Clamp

145195229
10-202-31-2: RNCC: 3 | RNVC: 2

22 Mar 2000

5340-14-485-9922
Access Cover

144859922
63024-4: RNCC: 3 | RNVC: 2

26 Feb 1997

5340-14-416-1903
Mounting Plate

144161903
M589-12121: RNCC: 3 | RNVC: 2

3 Jun 1987

5340-14-383-1880
Anchor Strap

143831880
MY205151203G02: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-316-1675
Access Cover

143161675
459581: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-319-3181
Access Cover

143193181
NO PRIMARY REF14-319-3181: RNCC: 3 | RNVC: 2
1317-2: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-240-9078
Angle Bracket

142409078
ST104M4-1-11P16A: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-448-8784
Quick Release Pin

144488784
620C12B115: RNCC: 3 | RNVC: 2

24 Jul 1991

5340-14-285-2130
Rod End Clevis

142852130
A10-90-101-74-0: RNCC: 3 | RNVC: 2
A10-90-101-74-0: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-201-5924
Retaining Clip

142015924
501-700-090-0: RNCC: 3 | RNVC: 2
101-754-007-1: RNCC: 5 | RNVC: 2

1 Jan 1962

5340-14-535-1843
Mounting Bracket

145351843
5000919775: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-429-9145
Angle Bracket

144299145
8700-6: RNCC: 3 | RNVC: 2
002415460A: RNCC: 5 | RNVC: 2

15 Feb 1989

5340-14-488-7287
Access Cover

144887287
2029399N00: RNCC: 3 | RNVC: 2
1024274D00: RNCC: 5 | RNVC: 2

28 May 1997

5340-14-533-9818
Mounting Bracket

145339818
10598576: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-14-508-0902
Butt Hinge

145080902
CP3020060060AIB: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-436-0952
Mounting Plate

144360952
H23829: RNCC: 3 | RNVC: 2

5 Dec 1989

5340-14-539-5013
Mounting Bracket

145395013
MECZ7353: RNCC: 3 | RNVC: 2

21 Jan 2004

5340-14-549-8327
Mounting Plate

145498327
2092764: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-545-7386
Blank Panel

145457386
F1264651: RNCC: 3 | RNVC: 2

4 May 2005

5340-14-388-5783
Loop Clamp

143885783
2050600950: RNCC: 3 | RNVC: 2
205F9-5: RNCC: 5 | RNVC: 2

3 Nov 1983

5340-14-484-6600
Retaining Strap

144846600
29404309: RNCC: 3 | RNVC: 2

28 Nov 1996

5340-14-391-9585
Rod End Connector

143919585
EC3680: RNCC: 3 | RNVC: 2
Z00.N7235110300: RNCC: 5 | RNVC: 2

21 Mar 1984

5340-14-356-2657
Runner

143562657
16388651: RNCC: 3 | RNVC: 2
16388651: RNCC: 5 | RNVC: 9

25 Apr 1979

5340-14-535-4188
Mounting Bracket

145354188
5010561094: RNCC: 3 | RNVC: 2

22 May 2003

5340-14-535-4046
Mounting Bracket

145354046
5010466588: RNCC: 3 | RNVC: 2

22 May 2003

5340-14-423-3231
Padlock

144233231
JZAR19: RNCC: 3 | RNVC: 2

14 Apr 1988

5340-14-433-1090
Pawl Fastener

144331090
3001075-04: RNCC: 3 | RNVC: 2

11 Jul 1989

5340-14-535-1359
Bumper

145351359
8R18: RNCC: 3 | RNVC: 2
5010049086: RNCC: 5 | RNVC: 2

14 May 2003

5340-14-508-1048
Angle Bracket

145081048
28085: RNCC: 3 | RNVC: 2
Y00003765: RNCC: 5 | RNVC: 9

26 Aug 1998

5340-14-424-0566
Mounting Plate

144240566
254503: RNCC: 3 | RNVC: 2

10 May 1988

5340-14-549-8862
Mounting Bracket

145498862
21106790: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-394-9286
Runner

143949286
20735725: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-284-9336
Bow Handle

142849336
156469: RNCC: 3 | RNVC: 2
156469: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-537-1441
Loop Clamp

145371441
NSA5516C08ND: RNCC: 1 | RNVC: 2
55162508: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-14-550-3367
Mounting Bracket

145503367
2716064560: RNCC: 3 | RNVC: 2

16 Jun 2006

5340-14-482-1120
Rim Lock Set

144821120
2102: RNCC: 3 | RNVC: 2
77077463: RNCC: 5 | RNVC: 2
91497171: RNCC: 5 | RNVC: 2

20 Jun 1996

5340-14-325-6450
Turnbuckle Body

143256450
121S81-302-04-0: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-517-0410
Pipe Hanger

145170410
307-831-305-0: RNCC: 3 | RNVC: 2

28 Oct 1999

5340-14-536-3155
Mounting Bracket

145363155
21226217-00: RNCC: 3 | RNVC: 2
21226217-8: RNCC: 5 | RNVC: 2

29 Jul 2003

5340-14-549-0747
Pipe Hanger

145490747
78731-048-100: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-409-7511
Retaining Strap

144097511
NO PRIMARY REF14-409-7511: RNCC: 3 | RNVC: 2
340849: RNCC: 5 | RNVC: 9

28 May 1986

5340-14-549-0918
Angle Bracket

145490918
RA1M703726311: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-546-9131
Cushioning Pad

145469131
681069: RNCC: 3 | RNVC: 2
SYQ5917: RNCC: 5 | RNVC: 2

7 Sep 2005

5340-14-548-1599
Mounting Bracket

145481599
5430127702: RNCC: 3 | RNVC: 2

13 Dec 2005

5340-14-453-2665
Angle Bracket

144532665
5010063368: RNCC: 3 | RNVC: 2

12 Feb 1992

5340-14-450-2163
Mounting Bracket

144502163
TB3050704: RNCC: 3 | RNVC: 2
71230: RNCC: 5 | RNVC: 9

25 Sep 1991

5340-14-548-7096
Mounting Bracket

145487096
53155902800: RNCC: 3 | RNVC: 2

1 Feb 2006

5340-14-401-5440
Angle Bracket

144015440
231400: RNCC: 3 | RNVC: 2

13 Jun 1985

5340-14-231-6433
Bumper

142316433
GSM1674A5: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-547-9739
Angle Bracket

145479739
RA1M701276051A1N1: RNCC: 3 | RNVC: 2

30 Nov 2005

5340-14-508-0382
Runner

145080382
4773220540: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-328-9548
Handwheel

143289548
15937: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-534-7277
Angle Bracket

145347277
10649088: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-14-516-4441
Mounting Plate

145164441
0010012: RNCC: 3 | RNVC: 2
10012: RNCC: 5 | RNVC: 9

24 Sep 1999

5340-14-416-7067
Angle Bracket

144167067
534962: RNCC: 3 | RNVC: 2

25 Jun 1987

5340-14-295-2000
Webbing Strap

142952000
81979: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-514-0407
Section Block Clamp

145140407
PM1A742699012: RNCC: 3 | RNVC: 2
PM1A742699012: RNCC: 5 | RNVC: 2

22 Apr 1999

5340-14-543-4498
Mounting Plate

145434498
AL100582: RNCC: 3 | RNVC: 2

30 Oct 2004

5340-14-440-9924
Mounting Bracket

144409924
20320671: RNCC: 3 | RNVC: 2

9 Aug 1990

5340-14-504-0917
Mounting Plate

145040917
39079714: RNCC: 3 | RNVC: 2
39079714: RNCC: 3 | RNVC: 9

5 Feb 1998

5340-14-335-3470
Anchor Strap

143353470
191807: RNCC: 3 | RNVC: 2

30 Jun 1976

5340-14-541-5042
Metal Grille

145415042
1091033: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-512-5918
Mounting Bracket

145125918
110034: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-455-9602
Angle Bracket

144559602
PM1A796011100: RNCC: 3 | RNVC: 2
PM1A796011100: RNCC: 5 | RNVC: 2

11 Jun 1992

5340-14-467-4059
Detent Plunger

144674059
1027433L00: RNCC: 3 | RNVC: 2

12 Jan 1994

5340-14-403-4452
Angle Bracket

144034452
8120300: RNCC: 3 | RNVC: 2
313186: RNCC: 5 | RNVC: 2

21 Aug 1985

5340-14-434-5156
Retaining Strap

144345156
DA1D201272300: RNCC: 3 | RNVC: 2

20 Sep 1989

5340-14-350-8528
Control Rod

143508528
M39350: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-403-0403
Mending Plate

144030403
139230: RNCC: 3 | RNVC: 9

25 Jul 1985

5340-14-368-6524
Mending Plate

143686524
944717: RNCC: 3 | RNVC: 2
944717: RNCC: 5 | RNVC: 9

20 Feb 1981

5340-14-238-9750
Angle Bracket

142389750
711569: RNCC: 3 | RNVC: 9
062711569: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-474-8248
Shimmy Damper

144748248
2510107901: RNCC: 3 | RNVC: 2
F300 0T 013 8909: RNCC: 5 | RNVC: 9

6 Mar 1995

5340-14-384-2958
Runner

143842958
CR0Q1BECNC0QUEREPF: RNCC: 3 | RNVC: 2

4 May 1983

5340-14-425-8842
Loop Clamp

144258842
5000041883: RNCC: 3 | RNVC: 2
1191433: RNCC: 5 | RNVC: 2

28 Jul 1988

5340-14-392-2784
Bow Handle

143922784
20856296: RNCC: 3 | RNVC: 9

21 Mar 1984

5340-14-350-2859
Retaining Strap

143502859
09508285733: RNCC: 3 | RNVC: 2
96082: RNCC: 5 | RNVC: 2

14 Jun 1978

5340-14-443-6374
Loop Clamp

144436374
01C0ACV01-12: RNCC: 1 | RNVC: 2
9136221112: RNCC: 3 | RNVC: 2

3 Dec 1990

5340-14-480-3959
Loop Clamp

144803959
29000087: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-421-7560
Rigid Caster

144217560
7812100: RNCC: 3 | RNVC: 2
89410478: RNCC: 5 | RNVC: 2
7812100: RNCC: 5 | RNVC: 9

27 Jan 1988

5340-14-411-9407
Cushioning Pad

144119407
M4Z6101916244: RNCC: 3 | RNVC: 2

19 Sep 1986

5340-14-528-5317
Mounting Bracket

145285317
45706671: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-540-3875
Runner

145403875
3521753: RNCC: 3 | RNVC: 2

20 Mar 2004

5340-14-520-2276
Mounting Bracket

145202276
PI: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-542-9766
Mounting Plate

145429766
T257A4004117: RNCC: 3 | RNVC: 2

18 Aug 2004

5340-14-439-1962
Bridge Clamp

144391962
16008406: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-345-7689
Mending Plate

143457689
0218150180: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-522-6963
Pipe Hanger

145226963
01248016: RNCC: 3 | RNVC: 2

15 Nov 2000

5340-14-502-5121
Mounting Plate

145025121
5000543841: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-504-2041
Mounting Bracket

145042041
1897701M92: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-381-6383
Clamping Catch

143816383
USM2MF52E3: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-506-8525
Lock Bolt

145068525
B47313: RNCC: 3 | RNVC: 2

27 May 1998

5340-14-555-3463
Strap Fastener Loop

145553463
852105: RNCC: 3 | RNVC: 2

29 Oct 2007

5340-14-500-7132
Corner Brace

145007132
E64009998213: RNCC: 3 | RNVC: 2
F300 0T 024 7324: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-351-2464
Lock-Release Lever

143512464
70385: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-349-3045
Retaining Strap

143493045
TH20B2823: RNCC: 3 | RNVC: 2

22 May 1978

5340-14-397-9746
Loop Clamp

143979746
242768: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-479-3531
Bail Handle

144793531
PR1305ZB: RNCC: 3 | RNVC: 2

10 Jan 1996

5340-14-448-7900
Mounting Bracket

144487900
39534084: RNCC: 3 | RNVC: 2
39534084: RNCC: 5 | RNVC: 9

10 Jul 1991

5340-14-259-6420
Retaining Strap

142596420
BFC10247: RNCC: 3 | RNVC: 2
BY148A10247: RNCC: 3 | RNVC: 2
BFC20247: RNCC: 5 | RNVC: 2

1 Jan 1969

5340-14-487-5325
Synchro Clamp

144875325
RA1M287111811: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-482-6093
Angle Bracket

144826093
20179839: RNCC: 3 | RNVC: 2

18 Jul 1996

5340-14-321-4856
Threaded Rod End

143214856
7049BM1: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-488-1510
Retaining Strap

144881510
0320100640: RNCC: 3 | RNVC: 2

18 Apr 1997

5340-14-396-1982
Mending Plate

143961982
6502821K: RNCC: 3 | RNVC: 2
0021802Y: RNCC: 5 | RNVC: 2

27 Nov 1984

5340-14-418-1016
Quick Release Pin

144181016
143576N2: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-14-554-0784
Loop Clamp

145540784
506 100: RNCC: 3 | RNVC: 2
506 100: RNCC: 3 | RNVC: 2

8 Jun 2007

5340-14-533-9821
Mounting Bracket

145339821
10647584: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-14-301-0202
Retaining Strap

143010202
121E71-518-06-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-442-0017
Mounting Bracket

144420017
332P64-1500-6501: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-14-453-0469
Snap Hook

144530469
7412000: RNCC: 3 | RNVC: 2
3001TMA143: RNCC: 5 | RNVC: 9

3 Feb 1992

5340-14-535-2714
Swivel Caster

145352714
888-381-042-0: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-553-6876
Mounting Bracket

145536876
82182578000: RNCC: 3 | RNVC: 2

9 May 2007

5340-14-335-9122
Rigid Caster

143359122
1158009: RNCC: 3 | RNVC: 2
FOE1158009: RNCC: 5 | RNVC: 9

24 Jul 1976

5340-14-214-9944
Mending Plate

142149944
3-3011: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-418-1427
Mounting Plate

144181427
603726: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-14-555-5205
Mounting Bracket

145555205
82404213000: RNCC: 3 | RNVC: 2

22 Nov 2007

5340-14-495-9979
Retaining Strap

144959979
624543: RNCC: 3 | RNVC: 2
F300 0T 020 7333: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-534-2928
Mounting Plate

145342928
10685048000: RNCC: 3 | RNVC: 2

19 Mar 2003

5340-14-475-8701
Loop Clamp

144758701
1035026B00: RNCC: 3 | RNVC: 2

10 May 1995

5340-14-519-7453
Access Cover

145197453
1108099A00: RNCC: 3 | RNVC: 2

5 Apr 2000

5340-14-041-4717
Runner

140414717
121S63-238-81-0: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-270-8147
Retaining Strap

142708147
C244010: RNCC: 3 | RNVC: 2
540215: RNCC: 5 | RNVC: 2
26244010: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-370-7361
Anchor Strap

143707361
676-15772-00-94: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-217-9130
Cover Strip

142179130
3160S25-24-035: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-453-8016
Mounting Plate

144538016
APE909-41802: RNCC: 3 | RNVC: 2

12 Mar 1992

5340-14-545-7961
Mounting Bracket

145457961
077161: RNCC: 3 | RNVC: 2

16 May 2005

5340-14-419-4213
Mending Plate

144194213
20062163: RNCC: 3 | RNVC: 2
20062163: RNCC: 5 | RNVC: 9
20062163: RNCC: 5 | RNVC: 9

16 Oct 1987

5340-14-544-3222
Mounting Bracket

145443222
0 363 02 070 0: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-14-350-7962
Loop Clamp

143507962
620-854-940-0: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-455-6763
Arched Cushion

144556763
F0143-009F18TAB2DE17: RNCC: 3 | RNVC: 2
MAT169-0012F20DE17: RNCC: 3 | RNVC: 2

10 Jun 1992

5340-14-480-9508
Mounting Bracket

144809508
5010112966: RNCC: 3 | RNVC: 2

11 Apr 1996

5340-14-412-4457
Angle Bracket

144124457
BJM00248: RNCC: 3 | RNVC: 2

15 Oct 1986

5340-14-464-8919
Mounting Bracket

144648919
312-02304-001: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-539-5472
Cover Strip

145395472
SZ09.251.001: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-14-539-6781
Mounting Bracket

145396781
10650272: RNCC: 3 | RNVC: 2

28 Jan 2004

5340-14-462-2307
Retaining Strap

144622307
T700A3013010102: RNCC: 3 | RNVC: 2

15 Apr 1993

5340-14-449-7591
Bridge Clamp

144497591
J00790-03-2030P007: RNCC: 3 | RNVC: 2

4 Sep 1991

5340-14-345-1461
Angle Bracket

143451461
F102-035: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-514-4652
Mounting Plate

145144652
45219307: RNCC: 3 | RNVC: 2
45219307: RNCC: 5 | RNVC: 2
IF-192-0623: RNCC: 5 | RNVC: 9

26 May 1999

5340-14-340-7856
Control Rod

143407856
GSM861-007F7: RNCC: 3 | RNVC: 2
GSM861-07F7: RNCC: 5 | RNVC: 2

14 Feb 1977

5340-14-377-9035
Control Rod

143779035
GSM137-014F5: RNCC: 3 | RNVC: 2

10 Jun 1982

5340-14-546-9933
Loop Clamp

145469933
NSA935807-3-06: RNCC: 3 | RNVC: 2

12 Sep 2005

5340-14-398-3768
Flush Lock

143983768
911-220C: RNCC: 3 | RNVC: 2
91322429: RNCC: 5 | RNVC: 2
911-220C6: RNCC: 5 | RNVC: 2
213736024: RNCC: 5 | RNVC: 9

31 Jan 1985

5340-14-247-3239
Loop Clamp

142473239
3160S73-62-574: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-217-9125
Cover Strip

142179125
3160S25-23-202: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-475-5057
Mounting Bracket

144755057
TB1030101F011: RNCC: 3 | RNVC: 2
TB1030101-00SPF011: RNCC: 5 | RNVC: 2
08-60-0036: RNCC: 5 | RNVC: 9

12 Apr 1995

5340-14-456-8741
Arched Cushion

144568741
F0143-009F18TAB2DE44: RNCC: 3 | RNVC: 2
MAT169-0012F20DE44: RNCC: 3 | RNVC: 2

24 Jul 1992

5340-14-378-9485
Runner

143789485
NO PRIMARY REF14-378-9485: RNCC: 3 | RNVC: 2
03326G: RNCC: 5 | RNVC: 9
3326: RNCC: 5 | RNVC: 9
3326G: RNCC: 5 | RNVC: 9

6 Sep 1982

5340-14-544-3542
Mounting Plate

145443542
S537A1041121: RNCC: 3 | RNVC: 2

24 Jan 2005

5340-14-429-0307
Support Hook

144290307
0301517310: RNCC: 3 | RNVC: 2

4 Jan 1989

5340-14-418-4963
Retaining Band

144184963
4771902390: RNCC: 3 | RNVC: 2

26 Aug 1987

5340-14-393-5521
Mounting Plate

143935521
970729: RNCC: 3 | RNVC: 2
970729: RNCC: 5 | RNVC: 9

7 Apr 1984

5340-14-396-2205
Angle Bracket

143962205
476331B: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-338-6177
Runner

143386177
0555612400: RNCC: 3 | RNVC: 2
0555612400: RNCC: 5 | RNVC: 9

17 Dec 1976

5340-14-230-5304
Loop Clamp

142305304
0091200120: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-555-1312
Mounting Plate

145551312
82183810000: RNCC: 3 | RNVC: 2

3 Oct 2007

5340-14-381-3751
Luggage Handle

143813751
243916: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-502-5021
Mounting Bracket

145025021
5000334456: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-377-3832
Padlock

143773832
1322AJAXC1-60: RNCC: 3 | RNVC: 2

17 May 1982

5340-14-544-7669
Bridge Clamp

145447669
6401MTT340: RNCC: 3 | RNVC: 2

23 Feb 2005

5340-14-550-3284
Mounting Bracket

145503284
2715007580: RNCC: 3 | RNVC: 2

15 Jun 2006

5340-14-549-0905
Angle Bracket

145490905
RA1M702202651N1: RNCC: 3 | RNVC: 2

2 Mar 2006

5340-14-318-0650
Mounting Bracket

143180650
0235287040: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-374-6206
Rod End Clevis

143746206
3015069: RNCC: 3 | RNVC: 2

30 Jan 1982

5340-14-450-2134
Mounting Plate

144502134
5005005031: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-14-446-1203
Rod End Clevis

144461203
576350: RNCC: 3 | RNVC: 2

6 Mar 1991

5340-14-512-0493
Mounting Plate

145120493
0030138: RNCC: 3 | RNVC: 2

3 Feb 1999

5340-14-550-4694
Angle Bracket

145504694
RA1B701716151: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-392-7776
Anchor Strap

143927776
5000285919: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-14-262-9977
Compression Cup

142629977
DLT007541: RNCC: 3 | RNVC: 2
DLT007541: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-504-2745
Mounting Bracket

145042745
3613515A03: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-548-6174
Angle Bracket

145486174
RA1B702606160A1: RNCC: 3 | RNVC: 2

27 Jan 2006

5340-14-476-0057
Loop Clamp

144760057
13M360-400: RNCC: 3 | RNVC: 2

17 May 1995

5340-14-369-0680
Angle Bracket

143690680
7021P: RNCC: 3 | RNVC: 9
7021: RNCC: 5 | RNVC: 9
7021: RNCC: 5 | RNVC: 9

17 Apr 1981

5340-14-430-5943
Rod End Clevis

144305943
PM1A275123341: RNCC: 3 | RNVC: 2
PM1A275123341: RNCC: 5 | RNVC: 2

22 Mar 1989

5340-14-222-6709
Rod End Connector

142226709
0000299221: RNCC: 3 | RNVC: 2
0000299221: RNCC: 5 | RNVC: 9
299221: RNCC: 5 | RNVC: 9

1 Jan 1966

5340-14-527-9058
Access Cover

145279058
40CAR01027: RNCC: 3 | RNVC: 2

28 Nov 2001

5340-14-525-1417
Loop Clamp

145251417
2327: RNCC: 3 | RNVC: 2

22 May 2001

5340-14-546-4417
Detent Plunger

145464417
5010631442: RNCC: 3 | RNVC: 2

6 Jul 2005

5340-14-446-1099
Mounting Bracket

144461099
ST406M53P128: RNCC: 3 | RNVC: 2

6 Mar 1991

5340-14-525-2462
Loop Clamp

145252462
06960P001027: RNCC: 3 | RNVC: 2

23 May 2001

5340-14-461-5530
Expansion Plug

144615530
VK72X9: RNCC: 3 | RNVC: 2
RAR3544: RNCC: 5 | RNVC: 2

17 Mar 1993

5340-14-520-3409
Mounting Plate

145203409
40146463: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-447-3229
Butt Hinge

144473229
72577: RNCC: 3 | RNVC: 2
4CH68IB: RNCC: 3 | RNVC: 2

15 May 1991

5340-14-402-6085
Access Cover

144026085
400313: RNCC: 3 | RNVC: 2
BGE400313: RNCC: 5 | RNVC: 2

19 Jul 1985

5340-14-468-0783
Blank Panel

144680783
LYN008055121301: RNCC: 3 | RNVC: 2

9 Feb 1994

5340-14-469-6387
Support Hook

144696387
PM1A512103: RNCC: 3 | RNVC: 2
PM1A512103: RNCC: 5 | RNVC: 2

4 May 1994

5340-14-468-4796
Threaded Rod End

144684796
A73075: RNCC: 3 | RNVC: 2

3 Mar 1994

5340-14-476-0928
Runner

144760928
222-3018-455: RNCC: 3 | RNVC: 2

17 May 1995

5340-14-474-1713
Loop Clamp

144741713
C168: RNCC: 3 | RNVC: 2
C168: RNCC: 5 | RNVC: 2

1 Feb 1995

5340-14-551-4971
Angle Bracket

145514971
RA1A701946201N1: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-544-1978
Clamping Catch

145441978
110831.10 + 110832.10: RNCC: 3 | RNVC: 9

10 Jan 2005

5340-14-549-7161
Compression Cup

145497161
21089850: RNCC: 3 | RNVC: 2

2 May 2006

5340-14-282-5547
Retaining Strap

142825547
9136116: RNCC: 3 | RNVC: 2
9136116: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-535-2115
Metal Grille

145352115
0301-47872: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-495-7553
Angle Bracket

144957553
101022X03A: RNCC: 3 | RNVC: 9
F300 0T 020 0344: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-527-2862
Rim Lock

145272862
012010: RNCC: 3 | RNVC: 9
1048A: RNCC: 5 | RNVC: 9

18 Oct 2001

5340-14-503-0416
Mounting Plate

145030416
2066-31: RNCC: 3 | RNVC: 2

22 Dec 1997

5340-14-486-3342
Retaining Band

144863342
PA01PE050101: RNCC: 3 | RNVC: 2

12 Mar 1997

5340-14-358-3320
Retaining Strap

143583320
103772702: RNCC: 3 | RNVC: 2
103772702: RNCC: 5 | RNVC: 2

13 Aug 1979

5340-14-511-0853
Mounting Bracket

145110853
74129700006: RNCC: 3 | RNVC: 2

2 Dec 1998

5340-14-504-7493
Bumper

145047493
95970032: RNCC: 3 | RNVC: 2
5001824867: RNCC: 3 | RNVC: 2

3 Mar 1998

5340-14-504-6215
Mounting Bracket

145046215
PLATI93619X00: RNCC: 3 | RNVC: 2

25 Feb 1998

5340-14-416-4762
Cushioning Pad

144164762
533328: RNCC: 3 | RNVC: 2

10 Jun 1987

5340-14-547-9232
Mounting Bracket

145479232
562248: RNCC: 3 | RNVC: 2

25 Nov 2005

5340-14-350-4276
Angle Bracket

143504276
214522: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-14-411-2971
Loop Clamp

144112971
TF3D: RNCC: 3 | RNVC: 2
TF3D: RNCC: 3 | RNVC: 2
44680: RNCC: 3 | RNVC: 9
TF3D: RNCC: 5 | RNVC: 9
44680: RNCC: 5 | RNVC: 9

6 Aug 1986

5340-14-503-2392
Bail Handle

145032392
39117783: RNCC: 3 | RNVC: 9

7 Jan 1998

5340-14-426-4655
Cover Strip

144264655
CJ66X66X80X1,5AG3: RNCC: 3 | RNVC: 2

1 Sep 1988

5340-14-207-5321
Loop Clamp

142075321
ELEPHANTPC160X18: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-506-8931
Loop Clamp

145068931
DG6: RNCC: 3 | RNVC: 2
16004: RNCC: 5 | RNVC: 2

27 May 1998

5340-14-231-6243
Loop Clamp

142316243
DLT000805: RNCC: 3 | RNVC: 2
DLT00805: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-534-8657
Retaining Bail

145348657
SV0330: RNCC: 3 | RNVC: 2
SYQ2550: RNCC: 5 | RNVC: 2

9 Apr 2003

5340-14-499-7999
Mounting Bracket

144997999
47801-6: RNCC: 3 | RNVC: 2
47801.6: RNCC: 3 | RNVC: 2
F300 0T 023 7904: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-509-0247
Mounting Plate

145090247
FH152804210: RNCC: 3 | RNVC: 2
FH152804200: RNCC: 3 | RNVC: 9

14 Oct 1998

5340-14-381-2252
Quick Release Pin

143812252
196280M91: RNCC: 3 | RNVC: 2
196280M91: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-516-5557
Belt-Strap Keeper

145165557
52434: RNCC: 3 | RNVC: 2

5 Oct 1999

5340-14-433-0038
Friction Catch

144330038
16887154: RNCC: 3 | RNVC: 2
16887154: RNCC: 3 | RNVC: 9

5 Jul 1989

5340-14-474-2773
Flush Lock

144742773
4183119: RNCC: 3 | RNVC: 2

8 Feb 1995

5340-14-550-7311
Webbing Strap

145507311
208895-0: RNCC: 3 | RNVC: 2

10 Jul 2006

5340-14-447-8795
Loop Clamp

144478795
B808123AN: RNCC: 3 | RNVC: 2

6 Jun 1991

5340-14-395-6633
Quick Release Pin

143956633
625S5T7: RNCC: 3 | RNVC: 2

30 Oct 1984

5340-14-303-2145
Loop Clamp

143032145
H17P: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-398-8898
Access Cover

143988898
22383417: RNCC: 3 | RNVC: 2
22383417: RNCC: 5 | RNVC: 9

6 Mar 1985

5340-14-362-0121
Retaining Strap

143620121
23058843-2: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-14-306-6529
Retaining Band

143066529
3577E17: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-527-7656
Mounting Bracket

145277656
010211010P: RNCC: 3 | RNVC: 2

19 Nov 2001

5340-14-407-7322
Bow Handle

144077322
28597: RNCC: 3 | RNVC: 9

27 Feb 1986

5340-14-302-1495
Mending Plate

143021495
A10-22-800-12-0: RNCC: 3 | RNVC: 2
A10-22-800-12-0: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-545-6922
Angle Bracket

145456922
RA1M705936111A1N1: RNCC: 3 | RNVC: 2

27 Apr 2005

5340-14-545-7007
Mounting Plate

145457007
RA1A703850411: RNCC: 3 | RNVC: 2

27 Apr 2005

5340-14-545-6842
Angle Bracket

145456842
RA1A703766421: RNCC: 3 | RNVC: 2

27 Apr 2005

5340-14-517-0096
Angle Bracket

145170096
RA1M794200880N1: RNCC: 3 | RNVC: 2

28 Oct 1999

5340-14-445-5272
Angle Bracket

144455272
232935: RNCC: 3 | RNVC: 2
89289573: RNCC: 5 | RNVC: 2

14 Feb 1991

5340-14-414-5448
Access Cover

144145448
TH20B1002: RNCC: 3 | RNVC: 2

11 Feb 1987

5340-14-466-3146
Access Cover

144663146
39458003: RNCC: 3 | RNVC: 2
39458003: RNCC: 3 | RNVC: 9

3 Nov 1993

5340-14-379-4252
Quick Release Pin

143794252
BAZ3911: RNCC: 3 | RNVC: 2

1 Oct 1982

5340-14-549-8340
Mounting Plate

145498340
2092767: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-304-2241
Rod End Clevis

143042241
R12608D10BBT: RNCC: 2 | RNVC: 2

1 Jan 1974

5340-14-466-3483
Butt Hinge

144663483
PM1A711210202: RNCC: 3 | RNVC: 2
PM1A711210202: RNCC: 5 | RNVC: 2

3 Nov 1993

5340-14-551-5371
Access Cover

145515371
SZ16.705.437: RNCC: 3 | RNVC: 2

28 Sep 2006

5340-14-304-3505
Loop Clamp

143043505
91060: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-533-5321
Mounting Bracket

145335321
SCC32CMS: RNCC: 3 | RNVC: 2

10 Feb 2003

5340-14-458-6576
Mounting Bracket

144586576
261834870: RNCC: 3 | RNVC: 2

29 Oct 1992

5340-14-249-9264
Retaining Strap

142499264
41583: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-031-5594
Access Cover

140315594
9895: RNCC: 3 | RNVC: 2
9895: RNCC: 5 | RNVC: 9

14 Jun 1980

5340-14-428-5319
Angle Bracket

144285319
4100-65-10-25: RNCC: 3 | RNVC: 2

8 Dec 1988

5340-14-539-8161
Access Cover

145398161
21242755-00: RNCC: 3 | RNVC: 2
21242755-0: RNCC: 5 | RNVC: 2

11 Feb 2004

5340-14-431-6143
Angle Bracket

144316143
31750405: RNCC: 3 | RNVC: 9

26 Apr 1989

5340-14-353-3265
Retaining Strap

143533265
RU8905: RNCC: 3 | RNVC: 2

8 Dec 1978

5340-14-325-9151
Key Blank

143259151
25511B24X24XC38: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-483-0897
Angle Bracket

144830897
76376: RNCC: 3 | RNVC: 2

8 Aug 1996

5340-14-534-6601
Pipe Hanger

145346601
5460 179: RNCC: 3 | RNVC: 2

1 Apr 2003

5340-14-515-4044
Mounting Bracket

145154044
20512167F: RNCC: 3 | RNVC: 2
20512167A: RNCC: 5 | RNVC: 2

13 Jul 1999

5340-14-249-7273
Retaining Strap

142497273
153039: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-513-1058
Mounting Bracket

145131058
T5674231: RNCC: 3 | RNVC: 2

3 Mar 1999

5340-14-555-3181
Mounting Bracket

145553181
82115723000: RNCC: 3 | RNVC: 2

24 Oct 2007

5340-14-325-9118
Key Blank

143259118
25511B7X10XC38: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-512-5666
Lock Bolt

145125666
S8576763: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-512-5655
Mounting Bracket

145125655
S8576724: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-481-0344
Angle Bracket

144810344
3BM01027AAAA: RNCC: 3 | RNVC: 2
3BM01027AAAA: RNCC: 5 | RNVC: 9

18 Apr 1996

Load More Results