What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 91 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 91 of 446

5340-14-424-3029
Mending Plate

144243029
39233374: RNCC: 3 | RNVC: 2
39233374: RNCC: 5 | RNVC: 9

19 May 1988

5340-14-480-9278
Angle Bracket

144809278
38021171: RNCC: 3 | RNVC: 2
38021171: RNCC: 5 | RNVC: 9

11 Apr 1996

5340-14-513-1781
Loop Clamp

145131781
11313112069: RNCC: 3 | RNVC: 2

9 Mar 1999

5340-14-546-3284
Mounting Bracket

145463284
82120376000: RNCC: 3 | RNVC: 2

25 Jun 2005

5340-14-513-3813
Mounting Plate

145133813
DE33057: RNCC: 3 | RNVC: 2

17 Mar 1999

5340-14-481-3686
Mounting Bracket

144813686
10283502: RNCC: 3 | RNVC: 2

1 May 1996

5340-14-525-8353
Metal Grille

145258353
F135186: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-14-536-0966
Mounting Bracket

145360966
A70238: RNCC: 3 | RNVC: 2

9 Jul 2003

5340-14-246-4667
Retaining Strap

142464667
A65043: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-426-1316
Rim Lock Set

144261316
3200TCGP: RNCC: 3 | RNVC: 2
91606371: RNCC: 5 | RNVC: 2

4 Aug 1988

5340-14-527-3936
Bumper

145273936
H145563W: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-14-455-8747
Mounting Plate

144558747
16759239: RNCC: 3 | RNVC: 2

11 Jun 1992

5340-14-482-1092
Mounting Bracket

144821092
38509712: RNCC: 3 | RNVC: 2
38509712: RNCC: 5 | RNVC: 9

20 Jun 1996

5340-14-383-8845
Access Cover

143838845
051445: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-417-4458
Rod End Clevis

144174458
206747: RNCC: 3 | RNVC: 2

8 Jul 1987

5340-14-545-8449
Mounting Plate

145458449
1001986: RNCC: 3 | RNVC: 2

19 May 2005

5340-14-458-5209
Block Clamp

144585209
16787441: RNCC: 3 | RNVC: 2
16787441: RNCC: 5 | RNVC: 9

23 Oct 1992

5340-14-497-9016
Angle Bracket

144979016
0315777350: RNCC: 3 | RNVC: 2

22 Oct 1997

5340-14-452-0228
Loop Clamp

144520228
650-791-082-0: RNCC: 3 | RNVC: 2

18 Dec 1991

5340-14-319-4305
Snap Hook

143194305
4690-4-606: RNCC: 3 | RNVC: 2
4690-50-22-66: RNCC: 5 | RNVC: 2
85-686-9914: RNCC: 6 | RNVC: 9

1 Jan 1975

5340-14-461-4521
Access Cover

144614521
BC100A270-121: RNCC: 3 | RNVC: 9
1003872K00: RNCC: 5 | RNVC: 2

10 Mar 1993

5340-14-246-3886
Angle Bracket

142463886
424-31039-000: RNCC: 3 | RNVC: 2
424-31039: RNCC: 5 | RNVC: 2
424-31039-000: RNCC: 5 | RNVC: 2
42431039: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-14-452-5900
Door Closer

144525900
RS90-N3: RNCC: 3 | RNVC: 2

15 Jan 1992

5340-14-405-1413
Tubular Fairlead

144051413
J05190-00-0230P003: RNCC: 3 | RNVC: 2

20 Nov 1985

5340-14-370-2536
Pipe Hanger

143702536
303-935-502-0: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-360-4260
Angle Bracket

143604260
CRP10F4-05: RNCC: 3 | RNVC: 2
85-544-2001: RNCC: 6 | RNVC: 9

23 Nov 1979

5340-14-340-9094
Cover Strip

143409094
330A76-3300-37: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-464-9993
Angle Bracket

144649993
365P63-1111-2101: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-243-9738
Lock-Release Lever

142439738
NO PRIMARY REF14-243-9738: RNCC: 3 | RNVC: 2
679221: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-454-8975
Runner

144548975
2085-05-009: RNCC: 3 | RNVC: 2
89411693: RNCC: 5 | RNVC: 9

24 Apr 1992

5340-14-470-5414
Retaining Strap

144705414
EA5M240-94-15: RNCC: 3 | RNVC: 2

22 Jun 1994

5340-14-365-7588
Rod End Clevis

143657588
310112112: RNCC: 3 | RNVC: 2
85-691-3135: RNCC: 6 | RNVC: 9

8 Oct 1980

5340-14-459-6655
Arched Cushion

144596655
MAT169-0012F19DE16: RNCC: 3 | RNVC: 2

10 Dec 1992

5340-14-426-1651
Access Cover

144261651
160H772002-07: RNCC: 3 | RNVC: 2

4 Aug 1988

5340-14-512-5068
Rim Latch

145125068
68-20-101-10: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-533-2545
Access Cover

145332545
V107992: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-14-535-5125
Access Cover

145355125
10-703-959: RNCC: 3 | RNVC: 2
SZ10.703.959: RNCC: 3 | RNVC: 2

31 May 2003

5340-14-366-3991
Quick Release Pin

143663991
0000729096: RNCC: 3 | RNVC: 2
0000729096: RNCC: 5 | RNVC: 9
729096: RNCC: 5 | RNVC: 9

20 Nov 1980

5340-14-568-8219
Utility Resilient Mount

145688219
BFN45-110: RNCC: 3 | RNVC: 2

7 Jul 2011

5340-14-379-7308
Clamping Catch

143797308
GP.22-IB: RNCC: 3 | RNVC: 2
0239512X00: RNCC: 5 | RNVC: 2
GP22IB: RNCC: 5 | RNVC: 2
RAR3435: RNCC: 5 | RNVC: 2

20 Oct 1982

5340-14-254-2760
Retaining Strap

142542760
K00267-58: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-371-7507
Loop Clamp

143717507
21S0701004: RNCC: 3 | RNVC: 2
85-691-8202: RNCC: 6 | RNVC: 9

5 Aug 1981

5340-14-328-5988
Angle Bracket

143285988
321A58-0831-25: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-369-1694
Rod End Clevis

143691694
365A91-3041-50: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-549-6215
Mounting Plate

145496215
JCB 10 135-731: RNCC: 3 | RNVC: 2

24 Apr 2006

5340-14-236-6720
Retaining Strap

142366720
NO PRIMARY REF14-236-6720: RNCC: 3 | RNVC: 2
188182: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-230-1134
Loop Clamp

142301134
51111905012: RNCC: 3 | RNVC: 2
A0021-25P12: RNCC: 5 | RNVC: 2
ASNA0021-25P12: RNCC: 5 | RNVC: 2
25P12: RNCC: 5 | RNVC: 2
A0021-25P12: RNCC: 5 | RNVC: 2
9562810580: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-374-0077
Anchor Strap

143740077
5172016200: RNCC: 3 | RNVC: 2
562484: RNCC: 5 | RNVC: 2
32930: RNCC: 5 | RNVC: 2
720162: RNCC: 5 | RNVC: 9

8 Dec 1981

5340-14-513-9228
Access Cover

145139228
1347-241D383: RNCC: 3 | RNVC: 2

19 Apr 1999

5340-14-412-1534
Anchor Strap

144121534
213752: RNCC: 3 | RNVC: 2

8 Oct 1986

5340-14-405-2670
Anchor Strap

144052670
006210080P: RNCC: 3 | RNVC: 2

27 Nov 1985

5340-14-444-8879
Plug Button

144448879
3123796: RNCC: 3 | RNVC: 2
0882386K00: RNCC: 5 | RNVC: 2
3123796: RNCC: 5 | RNVC: 2

28 Jan 1991

5340-14-335-3497
Access Cover

143353497
188346: RNCC: 3 | RNVC: 2

30 Jun 1976

5340-14-376-4739
Access Cover

143764739
16559899: RNCC: 3 | RNVC: 2
16559899: RNCC: 5 | RNVC: 9
16559899: RNCC: 5 | RNVC: 9

28 Apr 1982

5340-14-554-7882
Access Cover

145547882
L535A1501154: RNCC: 3 | RNVC: 2

23 Aug 2007

5340-14-520-4235
Access Cover

145204235
09.67.025.0424: RNCC: 3 | RNVC: 2
166510: RNCC: 3 | RNVC: 9

17 May 2000

5340-14-548-6125
Mounting Plate

145486125
RA1A704826341: RNCC: 3 | RNVC: 2

27 Jan 2006

5340-14-413-9301
Anchor Strap

144139301
407274: RNCC: 3 | RNVC: 2
BJQ407274: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-385-9518
Plug Button

143859518
41192D: RNCC: 3 | RNVC: 2
53937: RNCC: 5 | RNVC: 9
41192D: RNCC: 5 | RNVC: 9

24 Aug 1983

5340-14-544-1326
Access Cover

145441326
02200111: RNCC: 3 | RNVC: 2

5 Jan 2005

5340-14-346-5542
Access Cover

143465542
411MA0386DF2REP27: RNCC: 3 | RNVC: 2
411MA386R1F4: RNCC: 5 | RNVC: 2

12 Dec 1977

5340-14-512-9142
Access Door Hinge

145129142
562387: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-548-6061
Mounting Plate

145486061
RA1B702316063: RNCC: 3 | RNVC: 2

27 Jan 2006

5340-14-413-9816
Access Cover

144139816
410709: RNCC: 3 | RNVC: 2
BJQ410709: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-524-2792
Rod End Clevis

145242792
902791: RNCC: 3 | RNVC: 2

9 Mar 2001

5340-14-511-6815
Access Cover

145116815
10510251: RNCC: 3 | RNVC: 2

11 Jan 1999

5340-14-536-9882
Utility Access Door

145369882
8083: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-14-466-1371
Webbing Strap

144661371
5230702: RNCC: 3 | RNVC: 2

27 Oct 1993

5340-14-539-5421
Access Cover

145395421
SZ11.704.709: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-14-351-1242
Webbing Strap

143511242
120660: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-347-6554
Anchor Strap

143476554
79025248: RNCC: 3 | RNVC: 2
79025248: RNCC: 5 | RNVC: 9

1 Mar 1978

5340-14-479-6943
Access Cover

144796943
701732: RNCC: 3 | RNVC: 2

31 Jan 1996

5340-14-347-6502
Synchro Clamp

143476502
052217: RNCC: 3 | RNVC: 2

1 Mar 1978

5340-14-222-5454
Access Cover

142225454
0330520: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-517-3977
Access Cover

145173977
803481050113: RNCC: 3 | RNVC: 2
SDM803481050113: RNCC: 5 | RNVC: 9

8 Dec 1999

5340-14-502-8313
Anchor Strap

145028313
9R2807: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-409-3700
Anchor Strap

144093700
72985: RNCC: 3 | RNVC: 2

28 May 1986

5340-14-381-6003
Access Cover

143816003
398102060100: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-343-0891
Access Cover

143430891
191442: RNCC: 3 | RNVC: 2

16 Jun 1977

5340-14-447-1466
Access Cover

144471466
M4ZS747D1305: RNCC: 3 | RNVC: 2

3 May 1991

5340-14-548-0979
Angle Bracket

145480979
RA1M701876171: RNCC: 3 | RNVC: 2

10 Dec 2005

5340-14-554-5885
Access Cover

145545885
0390950930: RNCC: 3 | RNVC: 2

23 Jul 2007

5340-14-349-2314
Anchor Strap

143492314
225248: RNCC: 3 | RNVC: 2
225248: RNCC: 5 | RNVC: 9

22 May 1978

5340-14-445-9570
Mounting Bracket

144459570
103091150001: RNCC: 3 | RNVC: 2
103091150001: RNCC: 5 | RNVC: 2

27 Feb 1991

5340-14-376-3469
Rim Lock Set

143763469
SERRURESDIVERSESC0FFRESECURITE: RNCC: 3 | RNVC: 2

30 Mar 1982

5340-14-370-0505
Access Cover

143700505
398106010003: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-365-5611
Anchor Strap

143655611
A11A722256152: RNCC: 3 | RNVC: 2

19 Sep 1980

5340-14-425-7355
Block Clamp

144257355
91432B3001BD130B104: RNCC: 3 | RNVC: 2

21 Jul 1988

5340-14-547-4486
Expansion Plug

145474486
5010527667: RNCC: 3 | RNVC: 2

13 Oct 2005

5340-14-399-0535
Mounting Plate

143990535
476319N: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-465-2803
Blank Panel

144652803
365A61-5410-51: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-14-385-3742
Access Cover

143853742
0164041300: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-14-473-9443
Access Cover

144739443
20859725: RNCC: 3 | RNVC: 2
20859725: RNCC: 3 | RNVC: 9

18 Jan 1995

5340-14-507-5898
Lever Bracket

145075898
312-14218-001: RNCC: 3 | RNVC: 2

23 Jul 1998

5340-14-418-3322
Angle Bracket

144183322
4-453907: RNCC: 3 | RNVC: 9
4-453907: RNCC: 5 | RNVC: 2
4401752: RNCC: 5 | RNVC: 2
4-453907: RNCC: 5 | RNVC: 9

12 Aug 1987

5340-14-299-5963
Mounting Bracket

142995963
501-709-674-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-433-8519
Access Cover

144338519
071331S: RNCC: 3 | RNVC: 2

17 Aug 1989

5340-14-403-5430
Access Cover

144035430
79110804: RNCC: 3 | RNVC: 2
79110804: RNCC: 5 | RNVC: 9

21 Aug 1985

5340-14-410-6922
Access Cover

144106922
553184: RNCC: 3 | RNVC: 2

9 Jul 1986

5340-14-385-9272
Access Cover

143859272
103651001: RNCC: 3 | RNVC: 2
103651001: RNCC: 5 | RNVC: 2

24 Aug 1983

5340-14-540-2942
Access Cover

145402942
46248864: RNCC: 3 | RNVC: 2

18 Mar 2004

5340-14-402-0172
Access Cover

144020172
220550: RNCC: 3 | RNVC: 2
MAF0001005840: RNCC: 6 | RNVC: 9

26 Jun 1985

5340-14-321-0088
Access Cover

143210088
15436846: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-530-9321
Loop Clamp

145309321
SMC-S-27711-010-0: RNCC: 3 | RNVC: 2

17 Jul 2002

5340-14-292-5549
Angle Bracket

142925549
121E26-800-26-2: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-349-9410
Mending Plate

143499410
P4H005256-00: RNCC: 3 | RNVC: 2
4H005256-00: RNCC: 5 | RNVC: 2
4H005256-00: RNCC: 5 | RNVC: 9
P4H005256-00: RNCC: 5 | RNVC: 9

14 Jun 1978

5340-14-553-7255
Bumper

145537255
D-ZY6-25-10: RNCC: 3 | RNVC: 2

15 May 2007

5340-14-342-3378
Leakproof Seal Plug

143423378
J00790-02-1000P036: RNCC: 3 | RNVC: 2

14 Apr 1977

5340-14-351-9824
Anchor Strap

143519824
NO PRIMARY REF14-351-9824: RNCC: 3 | RNVC: 2
7625001: RNCC: 5 | RNVC: 9

16 Oct 1978

5340-14-281-2582
Rod End Clevis

142812582
121E22-818-00-0: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-351-2198
Retaining Strap

143512198
M533-200101: RNCC: 3 | RNVC: 2

10 Aug 1978

5340-14-461-6065
Access Cover

144616065
80-3011C: RNCC: 3 | RNVC: 2
80-3011: RNCC: 5 | RNVC: 2

17 Mar 1993

5340-14-545-6108
Loop Clamp

145456108
30171-00: RNCC: 3 | RNVC: 2

25 Apr 2005

5340-14-490-2915
Mounting Plate

144902915
J05085-02-0700P012: RNCC: 3 | RNVC: 2

24 Sep 1997

5340-14-385-9870
Runner

143859870
10-732441: RNCC: 3 | RNVC: 2
82506: RNCC: 3 | RNVC: 2
10732441: RNCC: 5 | RNVC: 2
82506: RNCC: 5 | RNVC: 9

24 Aug 1983

5340-14-010-0503
Handwheel

140100503
3130S82-21-800: RNCC: 3 | RNVC: 2

1 Jan 1961

5340-14-438-0897
Mounting Plate

144380897
NO PRIMARY REF14-438-0897: RNCC: 3 | RNVC: 2
287317: RNCC: 5 | RNVC: 9
287317: RNCC: 5 | RNVC: 9

7 Mar 1990

5340-14-251-7434
Threaded Rod End

142517434
23310-01-3010P007: RNCC: 3 | RNVC: 2
232-22-89-02: RNCC: 5 | RNVC: 2

21 Jun 1989

5340-14-376-5292
Mounting Plate

143765292
NO PRIMARY REF14-376-5292: RNCC: 3 | RNVC: 2
404304593: RNCC: 5 | RNVC: 9
404304593: RNCC: 5 | RNVC: 9

28 Apr 1982

5340-14-315-0345
Mounting Plate

143150345
NO PRIMARY REF14-315-0345: RNCC: 3 | RNVC: 2
64H0010DET38: RNCC: 5 | RNVC: 9

1 Jan 1975

5340-14-501-2119
Mounting Plate

145012119
412415-201-22-03-90: RNCC: 3 | RNVC: 2
412415-201.22.03.90: RNCC: 3 | RNVC: 2
F300 0T 025 2524: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-202-5349
Loop Clamp

142025349
51113105024: RNCC: 3 | RNVC: 2
25G24: RNCC: 5 | RNVC: 2
25G24: RNCC: 5 | RNVC: 2
A0021-25G24: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-14-520-4224
Mounting Bracket

145204224
S348-67: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-340-3134
Pipe Hanger

143403134
M3C704-064: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-214-3779
Loop Clamp

142143779
51123105027: RNCC: 3 | RNVC: 2
253192700: RNCC: 5 | RNVC: 2
24GE27: RNCC: 5 | RNVC: 2
25GE27: RNCC: 5 | RNVC: 2
A0021-25GE27: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-329-1188
Mounting Bracket

143291188
253-5M361P118F: RNCC: 3 | RNVC: 9
PA253-5M361P118F: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-490-5722
Mounting Plate

144905722
5302357.02 46.01: RNCC: 3 | RNVC: 2
5302357-02 46-01: RNCC: 5 | RNVC: 2
F300 0T 024 2518: RNCC: 6 | RNVC: 9

2 Oct 1997

5340-14-555-3126
Loop Clamp

145553126
ABS0901-020: RNCC: 3 | RNVC: 2

24 Oct 2007

5340-14-442-0116
Mounting Plate

144420116
332P66-1405-21: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-14-430-1823
Loop Clamp

144301823
68935011: RNCC: 3 | RNVC: 2
68935011: RNCC: 5 | RNVC: 9

8 Mar 1989

5340-14-237-9644
Angle Bracket

142379644
0000401259: RNCC: 3 | RNVC: 2
0000401259: RNCC: 5 | RNVC: 9
401259: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-537-8926
Loop Clamp

145378926
11317012016: RNCC: 3 | RNVC: 2
436504: RNCC: 5 | RNVC: 2
18687505-2: RNCC: 5 | RNVC: 2

3 Dec 2003

5340-14-551-3522
Angle Bracket

145513522
RA1M709319211N1: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-552-0423
Angle Bracket

145520423
0249921180: RNCC: 3 | RNVC: 2

22 Nov 2006

5340-14-461-2870
Mounting Bracket

144612870
1DM164753: RNCC: 3 | RNVC: 2
91714328: RNCC: 5 | RNVC: 2

3 Mar 1993

5340-14-528-8376
Mounting Bracket

145288376
27106813-5: RNCC: 3 | RNVC: 2

20 Feb 2002

5340-14-383-6139
Rod End Clevis

143836139
TB30-47065-100: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-472-8623
Butt Hinge

144728623
332A08-0605-23: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-14-482-9201
Pipe Hanger

144829201
78731-054-050: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-418-4826
Leaf Spring

144184826
L80G244LD1025EP9: RNCC: 3 | RNVC: 2
1105-161: RNCC: 5 | RNVC: 2
L80G244-5: RNCC: 5 | RNVC: 2
R80G244LD1025EP9: RNCC: 5 | RNVC: 2

26 Aug 1987

5340-14-528-7364
Handwheel

145287364
90367-1: RNCC: 3 | RNVC: 2
A1167196: RNCC: 5 | RNVC: 2

7 Feb 2002

5340-14-346-8220
Turnbuckle Body

143468220
326708: RNCC: 3 | RNVC: 2
20326708-9: RNCC: 5 | RNVC: 2

19 Jan 1978

5340-14-335-9210
Mending Plate

143359210
326569: RNCC: 3 | RNVC: 2
20326569-7: RNCC: 5 | RNVC: 2

24 Jul 1976

5340-14-224-6258
Mortise Latch

142246258
2000033TRPP8A: RNCC: 3 | RNVC: 2
2000033TRPP8A: RNCC: 3 | RNVC: 9

1 Jan 1966

5340-14-395-5811
Mounting Bracket

143955811
5-1881B43152-493: RNCC: 3 | RNVC: 2

30 Oct 1984

5340-14-342-7712
Rod End Clevis

143427712
20317178-8: RNCC: 3 | RNVC: 2
317178: RNCC: 5 | RNVC: 2

16 May 1977

5340-14-311-3675
Webbing Strap

143113675
AB56-2: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-461-7247
Leakproof Seal Plug

144617247
A-JB0032-1: RNCC: 3 | RNVC: 9
AJB0032-1: RNCC: 5 | RNVC: 9

24 Mar 1993

5340-14-522-7151
Compression Cup

145227151
304-618-701-0: RNCC: 3 | RNVC: 2

15 Nov 2000

5340-14-291-1340
Webbing Strap

142911340
GL1-6: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-446-2820
Mounting Plate

144462820
5000434816: RNCC: 3 | RNVC: 2
5000434816: RNCC: 5 | RNVC: 9

12 Mar 1991

5340-14-395-5929
Shimmy Damper

143955929
5-1881B43152-746: RNCC: 3 | RNVC: 2

30 Oct 1984

5340-14-418-3342
Anchor Strap

144183342
4-455608: RNCC: 3 | RNVC: 9
4-455608: RNCC: 5 | RNVC: 2
4-455608: RNCC: 5 | RNVC: 9

12 Aug 1987

5340-14-477-2765
Cover Strip

144772765
341A81-0651-21: RNCC: 3 | RNVC: 2

3 Aug 1995

5340-14-408-9648
Bridge Clamp

144089648
OUT50105-2: RNCC: 3 | RNVC: 2
0UT50105-2: RNCC: 5 | RNVC: 2

9 Apr 1986

5340-14-410-3174
Angle Bracket

144103174
332A75-1132-22: RNCC: 3 | RNVC: 2

18 Jun 1986

5340-14-482-6706
T Plate

144826706
437331: RNCC: 3 | RNVC: 2
437331-001: RNCC: 5 | RNVC: 9

18 Jul 1996

5340-14-332-3140
Loop Clamp

143323140
520111: RNCC: 3 | RNVC: 2
A5X516-5X0-5: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-370-2504
Retaining Strap

143702504
650-403-064-0: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-206-3122
Snap Hook

142063122
22201-328-160: RNCC: 3 | RNVC: 2
22201-017: RNCC: 5 | RNVC: 2
3910-02-020: RNCC: 5 | RNVC: 2
PM49-89-1-2-3: RNCC: 5 | RNVC: 2

1 Jan 1964

5340-14-454-9863
Rod End Clevis

144549863
1720-83/0194-1: RNCC: 3 | RNVC: 2

1 May 1992

5340-14-441-1901
Metal Grille

144411901
A2250-1-29: RNCC: 3 | RNVC: 2
91496267: RNCC: 5 | RNVC: 2

22 Aug 1990

5340-14-332-2142
Eye Hook

143322142
21201-003: RNCC: 3 | RNVC: 2
E1128: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-389-1180
Synchro Clamp

143891180
330A07-20-014: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-424-3639
Loop Clamp

144243639
ASNA0021-21S12: RNCC: 1 | RNVC: 2
51315302012: RNCC: 3 | RNVC: 2
21S12: RNCC: 5 | RNVC: 2
A0021-21S12: RNCC: 5 | RNVC: 2

19 May 1988

5340-14-378-9376
Access Cover

143789376
NO PRIMARY REF14-378-9376: RNCC: 3 | RNVC: 2
53230060: RNCC: 5 | RNVC: 9

6 Sep 1982

5340-14-389-0722
Angle Bracket

143890722
TB30-56116-101: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-14-376-5818
Loop Clamp

143765818
NO PRIMARY REF14-376-5818: RNCC: 3 | RNVC: 2
404307374: RNCC: 5 | RNVC: 2
404307374: RNCC: 5 | RNVC: 9

28 Apr 1982

5340-14-526-0878
Block Clamp

145260878
4A-720-10-09: RNCC: 3 | RNVC: 2

4 Jul 2001

5340-14-339-5657
Access Cover

143395657
4106-002: RNCC: 3 | RNVC: 2
4106-002: RNCC: 5 | RNVC: 2

18 Jan 1977

5340-14-439-2455
Mounting Bracket

144392455
332A55-0133-20: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-370-9031
Webbing Strap

143709031
703A92-0035-11: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-14-425-7362
Block Clamp

144257362
91432B25D10B10-25B101: RNCC: 3 | RNVC: 2

21 Jul 1988

5340-14-350-1605
Strap Fastener Loop

143501605
MB1071: RNCC: 3 | RNVC: 2
8888: RNCC: 5 | RNVC: 9
MB1071: RNCC: 5 | RNVC: 9
85-800-5665: RNCC: 6 | RNVC: 9

14 Jun 1978

5340-14-473-6521
Synchro Clamp

144736521
332A32-3280-21: RNCC: 3 | RNVC: 2

4 Jan 1995

5340-14-543-8714
Webbing Strap

145438714
154445: RNCC: 3 | RNVC: 2

14 Dec 2004

5340-14-481-0908
Angle Bracket

144810908
78702-050C: RNCC: 3 | RNVC: 2

18 Apr 1996

5340-14-335-7847
Corner Brace

143357847
330A22-2711-20: RNCC: 3 | RNVC: 2

30 Jun 1976

5340-14-549-9039
Bridge Clamp

145499039
1091961-001: RNCC: 3 | RNVC: 2

17 May 2006

5340-14-517-5473
Clamping Catch

145175473
GO.32-ZB: RNCC: 3 | RNVC: 2
GO32ZB: RNCC: 5 | RNVC: 2
G032ZB: RNCC: 5 | RNVC: 2

5 Jan 2000

5340-14-420-3732
Loop Clamp

144203732
15151996: RNCC: 3 | RNVC: 2

7 Dec 1987

5340-14-550-5383
Mounting Bracket

145505383
10648693001: RNCC: 3 | RNVC: 2

22 Jun 2006

5340-14-236-1941
Angle Bracket

142361941
1441S: RNCC: 3 | RNVC: 9
7000204P: RNCC: 5 | RNVC: 9
1441: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-455-3108
Access Cover

144553108
IF164-457: RNCC: 3 | RNVC: 9

21 May 1992

5340-14-376-2420
Runner

143762420
NO PRIMARY REF14-376-2420: RNCC: 3 | RNVC: 2
IMS500-15D: RNCC: 5 | RNVC: 9

30 Mar 1982

5340-14-407-7288
Thumb Latch

144077288
11-26576REP14: RNCC: 3 | RNVC: 2
11-26576REP14: RNCC: 5 | RNVC: 9

27 Feb 1986

5340-14-528-5999
Eye Hook

145285999
944200005: RNCC: 3 | RNVC: 2
791150: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-521-5497
Clamping Catch

145215497
16-7-3565: RNCC: 3 | RNVC: 2

16 Aug 2000

5340-14-389-8886
Clamping Catch

143898886
TL800A5+TL800-5-5: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-14-425-4721
Handwheel

144254721
F15OD100-9: RNCC: 3 | RNVC: 9

6 Jul 1988

5340-14-453-4193
Mounting Bracket

144534193
NO PRIMARY REF14-453-4193: RNCC: 3 | RNVC: 2
637428: RNCC: 5 | RNVC: 2

19 Feb 1992

5340-14-533-7479
Mounting Bracket

145337479
168E631-00: RNCC: 3 | RNVC: 2

20 Feb 2003

5340-14-456-4730
Cushioning Pad

144564730
DE84-003-251: RNCC: 3 | RNVC: 9

2 Jul 1992

5340-14-410-3338
Plug Button

144103338
S3659-2: RNCC: 3 | RNVC: 2

18 Jun 1986

5340-14-467-1977
Mounting Bracket

144671977
D54317-1: RNCC: 3 | RNVC: 2

21 Dec 1993

5340-14-340-3434
Angle Bracket

143403434
M3C707-41: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-434-3431
Rod End Connector

144343431
FV178-5-100-01: RNCC: 3 | RNVC: 2

20 Sep 1989

5340-14-512-6056
Loop Clamp

145126056
TORRO8-12/7.5: RNCC: 3 | RNVC: 2
TORRO8-12/7,5: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-472-7269
Angle Bracket

144727269
410588: RNCC: 3 | RNVC: 2
410588-001: RNCC: 5 | RNVC: 9

9 Nov 1994

5340-14-437-3231
Mounting Plate

144373231
A10-76-167-50-0: RNCC: 3 | RNVC: 2
A10-76-167-50-0: RNCC: 5 | RNVC: 2
85-693-7291: RNCC: 6 | RNVC: 9

24 Jan 1990

5340-14-545-8772
Strap Fastener Loop

145458772
01802-2-VO-01212: RNCC: 3 | RNVC: 2

24 May 2005

5340-14-549-6998
Loop Clamp

145496998
RSGU 1.76/20-W1: RNCC: 3 | RNVC: 2
RSGU17620W1: RNCC: 5 | RNVC: 2

27 Apr 2006

5340-14-299-3097
Mending Plate

142993097
NO PRIMARY REF14-299-3097: RNCC: 3 | RNVC: 2
39-11-00-013: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-532-0681
Mounting Bracket

145320681
SZ03.725.319: RNCC: 3 | RNVC: 2
03-725-319: RNCC: 3 | RNVC: 2

9 Oct 2002

5340-14-560-9224
Utility Resilient Mount

145609224
849-0-80-006: RNCC: 3 | RNVC: 2

3 Jun 2009

5340-14-534-6571
Cover Strip

145346571
HR150-010102-01: RNCC: 3 | RNVC: 2

1 Apr 2003

5340-14-213-4894
Strapping

142134894
5X0-3AGZ: RNCC: 3 | RNVC: 2
5X0-3: RNCC: 5 | RNVC: 2

1 Jan 1964

5340-14-406-0018
Pipe Hanger

144060018
SDMU-6474-1: RNCC: 3 | RNVC: 2

20 Dec 1985

5340-14-311-6706
T Plate

143116706
319A21-10-010: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-369-2364
Loop Clamp

143692364
650-403-009-0: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-370-2537
Pipe Hanger

143702537
303-995-501-0: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-379-3796
Anchor Strap

143793796
NO PRIMARY REF14-379-3796: RNCC: 3 | RNVC: 2
345-06225-0: RNCC: 5 | RNVC: 9
345062250: RNCC: 5 | RNVC: 9

1 Oct 1982

5340-14-520-7377
Arched Cushion

145207377
MAT169-0027F19DE114-3: RNCC: 3 | RNVC: 2

6 Jun 2000

5340-14-218-6013
Expansion Plug

142186013
E29584-20A: RNCC: 2 | RNVC: 2
202370: RNCC: 3 | RNVC: 2
4800S: RNCC: 3 | RNVC: 2
9-72245: RNCC: 3 | RNVC: 9
BNA116-20: RNCC: 5 | RNVC: 2
E29-584-20A37-2S: RNCC: 5 | RNVC: 9
97-578: RNCC: 5 | RNVC: 9
0702990800: RNCC: 5 | RNVC: 9
443697: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-432-1286
Mounting Plate

144321286
853-600-141-0: RNCC: 3 | RNVC: 2

24 May 1989

5340-14-430-2845
Mounting Bracket

144302845
JVCT00-08: RNCC: 3 | RNVC: 2
89415203: RNCC: 5 | RNVC: 2
89416211: RNCC: 5 | RNVC: 2

15 Mar 1989

5340-14-490-2909
Mounting Bracket

144902909
J05085-02-0700P006: RNCC: 3 | RNVC: 2

24 Sep 1997

5340-14-331-4435
Retaining Strap

143314435
4A1679: RNCC: 3 | RNVC: 2
RA47534: RNCC: 5 | RNVC: 2
85-636-0051: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-514-3330
Mounting Bracket

145143330
EA1M703-10-830: RNCC: 3 | RNVC: 2

12 May 1999

5340-14-399-6901
Retaining Strap

143996901
540-0000-031: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-348-5601
Cover Strip

143485601
330A58-1300-69: RNCC: 3 | RNVC: 2

29 Mar 1978

5340-14-533-4946
Mounting Bracket

145334946
S41-901B: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-14-362-9851
Bumper

143629851
D1512-850: RNCC: 3 | RNVC: 2

3 Apr 1980

5340-14-364-4180
Mending Plate

143644180
330A58-3040-20: RNCC: 3 | RNVC: 2

7 Aug 1980

5340-14-498-4729
Loop Clamp

144984729
RS2100-10-15: RNCC: 3 | RNVC: 2
91968697: RNCC: 3 | RNVC: 2
F300 0T 005 2002: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-445-8875
Mounting Bracket

144458875
39959452: RNCC: 3 | RNVC: 2
39959452: RNCC: 5 | RNVC: 9

27 Feb 1991

5340-14-443-0033
Angle Bracket

144430033
041A203: RNCC: 3 | RNVC: 2
041A203: RNCC: 5 | RNVC: 2

7 Nov 1990

5340-14-452-3421
Turnbuckle Body

144523421
1000178: RNCC: 3 | RNVC: 2
91564922: RNCC: 5 | RNVC: 2
89255064: RNCC: 5 | RNVC: 2

8 Jan 1992

5340-14-455-3527
Retaining Strap

144553527
320989: RNCC: 3 | RNVC: 2
320989: RNCC: 5 | RNVC: 9

21 May 1992

5340-14-416-2475
Doorknob

144162475
4449819: RNCC: 3 | RNVC: 2

3 Jun 1987

5340-14-511-7163
Mounting Bracket

145117163
50000315: RNCC: 3 | RNVC: 2

13 Jan 1999

5340-14-409-7410
Control Rod

144097410
74146156: RNCC: 3 | RNVC: 9

28 May 1986

5340-14-450-4986
Retaining Strap

144504986
BLC236939: RNCC: 3 | RNVC: 2

9 Oct 1991

5340-14-467-8540
Loop Clamp

144678540
166081: RNCC: 3 | RNVC: 2
89170183: RNCC: 5 | RNVC: 2

27 Jan 1994

5340-14-508-0378
Runner

145080378
4773220990: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-499-0931
Mounting Plate

144990931
294865: RNCC: 3 | RNVC: 2
294865: RNCC: 5 | RNVC: 9
F300 0T 017 5768: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-406-4625
Cover Strip

144064625
FD3C210-274: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-303-5185
Sliding Door Track

143035185
3160S25-21-056: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-394-2872
Webbing Strap

143942872
NO PRIMARY REF14-394-2872: RNCC: 3 | RNVC: 2
M4ZS460D7982: RNCC: 5 | RNVC: 2
7825-35X600: RNCC: 5 | RNVC: 2

28 Aug 1984

5340-14-511-6334
Pipe Hanger

145116334
78733-020-022B: RNCC: 3 | RNVC: 2

6 Jan 1999

5340-14-473-4396
Mounting Plate

144734396
20230-522/05: RNCC: 3 | RNVC: 2
20230-522/05: RNCC: 3 | RNVC: 2

31 Dec 1994

5340-14-545-7738
Mounting Bracket

145457738
708470: RNCC: 3 | RNVC: 2

12 May 2005

5340-14-550-4681
Angle Bracket

145504681
RA1B701492361N1: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-14-434-4733
Doorstop

144344733
72711BC18L80A: RNCC: 3 | RNVC: 2

20 Sep 1989

5340-14-310-7639
Threaded Rod End

143107639
B285356: RNCC: 3 | RNVC: 2
285356: RNCC: 5 | RNVC: 9
DBAB285356: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-443-8458
Synchro Clamp

144438458
FA1E706-92582: RNCC: 3 | RNVC: 2

10 Dec 1990

5340-14-339-2890
Retaining Strap

143392890
0607164900: RNCC: 3 | RNVC: 2
0607164900: RNCC: 5 | RNVC: 9

18 Jan 1977

5340-14-537-6398
Bow Handle

145376398
0407.4382: RNCC: 3 | RNVC: 2
5001864793: RNCC: 5 | RNVC: 2

18 Nov 2003

5340-14-501-0888
Retaining Strap

145010888
189337218: RNCC: 3 | RNVC: 9
F300 0T 025 1230: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-449-4146
Loop Clamp

144494146
2-539163-8: RNCC: 3 | RNVC: 2
2-539163-8: RNCC: 5 | RNVC: 9

7 Aug 1991

5340-14-219-2412
Angle Bracket

142192412
4217-5: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-461-7648
Retaining Band

144617648
243963: RNCC: 3 | RNVC: 2

24 Mar 1993

5340-14-518-5956
Mounting Bracket

145185956
5010057977: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-504-7023
Mounting Plate

145047023
5001833842: RNCC: 3 | RNVC: 2
488628H: RNCC: 3 | RNVC: 2

27 Feb 1998

5340-14-236-5608
Rod End Connector

142365608
321A28-0116-20: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-527-1234
Loop Clamp

145271234
R30-28-6: RNCC: 3 | RNVC: 2
R30-28: RNCC: 5 | RNVC: 2
620-858-528-0: RNCC: 5 | RNVC: 2

3 Oct 2001

5340-14-534-0911
Synchro Clamp

145340911
330A85-0173-32: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-14-493-6477
Access Cover

144936477
J05085-02-0320P012: RNCC: 3 | RNVC: 2

8 Oct 1997

5340-14-397-8952
Quick Release Pin

143978952
SLKV34X165: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-486-4713
Retaining Clip

144864713
6462-31: RNCC: 3 | RNVC: 2
F300 0T 017 2464: RNCC: 6 | RNVC: 9

21 Mar 1997

5340-14-442-2479
Bail Handle

144422479
PR.305-IB: RNCC: 3 | RNVC: 2
T259-113: RNCC: 5 | RNVC: 2
PR305IB: RNCC: 5 | RNVC: 2
98222186: RNCC: 5 | RNVC: 2
85-694-1833: RNCC: 6 | RNVC: 9

3 Oct 1990

5340-14-532-7818
Rim Latch

145327818
19-93-10: RNCC: 3 | RNVC: 2
19-93-10: RNCC: 5 | RNVC: 2

11 Dec 2002

5340-14-409-4474
Loop Clamp

144094474
NO PRIMARY REF14-409-4474: RNCC: 3 | RNVC: 2
91515029000: RNCC: 5 | RNVC: 9

28 May 1986

5340-14-326-2046
Access Cover

143262046
J00650-01-0400P005: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-379-7482
Access Cover

143797482
M389-112111: RNCC: 3 | RNVC: 2
27101238-1: RNCC: 3 | RNVC: 2

20 Oct 1982

5340-14-312-2830
Rod End Clevis

143122830
502-551-361-0: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-307-0211
Handwheel

143070211
1M5A32: RNCC: 3 | RNVC: 2
AFM62-32: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-288-9689
Rod End Connector

142889689
A10-76-262-03-0: RNCC: 3 | RNVC: 2
A10-76-262-03-0: RNCC: 3 | RNVC: 2
A10-76-262-03-0: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-457-2622
Mounting Plate

144572622
402247C-SG10137-Z2CND17-12: RNCC: 3 | RNVC: 2

20 Aug 1992

5340-14-529-5288
Angle Bracket

145295288
330A31-1699-20: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-325-2428
Sliding Door Track

143252428
3160S29-16-220: RNCC: 3 | RNVC: 2
85-611-4120: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-325-6657
Bumper

143256657
050A57-520602C: RNCC: 3 | RNVC: 2
0520602C00: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-341-1998
Loop Clamp

143411998
M3E707-84: RNCC: 3 | RNVC: 2

16 Mar 1977

5340-14-426-5574
Rigid Caster

144265574
LF8JA300-23B: RNCC: 3 | RNVC: 2
91520021: RNCC: 5 | RNVC: 2

8 Sep 1988

5340-14-459-2649
Loop Clamp

144592649
292006: RNCC: 3 | RNVC: 2
85-694-8086: RNCC: 6 | RNVC: 9

19 Nov 1992

5340-14-453-6318
Angle Bracket

144536318
21-291-200: RNCC: 3 | RNVC: 2
21-291-200: RNCC: 5 | RNVC: 9

3 Mar 1992

5340-14-325-2475
Pipe Hanger

143252475
E4M704-21-980: RNCC: 3 | RNVC: 2
85-686-6132: RNCC: 6 | RNVC: 9

2 Jul 1975

5340-14-541-4835
Mounting Bracket

145414835
88179-2147: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-472-4033
Lock Bolt

144724033
350A27-3155-20: RNCC: 3 | RNVC: 2
350A27-315520: RNCC: 5 | RNVC: 9

19 Oct 1994

5340-14-473-8637
Mounting Bracket

144738637
332P65-2349-20: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-14-437-9461
Mounting Bracket

144379461
330A25-2203-24: RNCC: 3 | RNVC: 2

28 Feb 1990

5340-14-225-8634
Cover Strip

142258634
3160S25-29-079: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-428-5059
Runner

144285059
4601DMP101-0010: RNCC: 3 | RNVC: 2

8 Dec 1988

5340-14-522-9573
Mounting Bracket

145229573
ST159-2M516-2P13: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-14-465-3899
Bail Handle

144653899
IF010-013: RNCC: 3 | RNVC: 9

28 Sep 1993

5340-14-348-1969
Bail Handle

143481969
NO PRIMARY REF14-348-1969: RNCC: 3 | RNVC: 2
27-01201-099-00: RNCC: 5 | RNVC: 9

29 Mar 1978

5340-14-474-4741
Dashpot

144744741
MG19698: RNCC: 3 | RNVC: 2

15 Feb 1995

5340-14-485-1586
Retaining Strap

144851586
189316-241: RNCC: 3 | RNVC: 9

10 Jan 1997

5340-14-469-3508
Mounting Bracket

144693508
D55691: RNCC: 3 | RNVC: 2

20 Apr 1994

5340-14-523-8642
Mounting Bracket

145238642
45710511: RNCC: 3 | RNVC: 2

8 Feb 2001

5340-14-539-9418
Clamping Catch

145399418
10 0004 0002: RNCC: 3 | RNVC: 2
10 0004 0002: RNCC: 5 | RNVC: 9
AA013782: RNCC: 6 | RNVC: 9

25 Feb 2004

5340-14-497-5057
Loop Clamp

144975057
78747: RNCC: 3 | RNVC: 2
F300 0T 023 2814: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-553-2696
Mounting Plate

145532696
FRA503016A: RNCC: 3 | RNVC: 2
FRA503016A: RNCC: 5 | RNVC: 2

20 Mar 2007

5340-14-535-2628
Angle Bracket

145352628
RA1M702436281A1: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-458-0057
Webbing Strap

144580057
332118: RNCC: 3 | RNVC: 2
332118: RNCC: 5 | RNVC: 9

2 Oct 1992

5340-14-539-9740
Mounting Bracket

145399740
RA1B701430171: RNCC: 3 | RNVC: 2

25 Feb 2004

5340-14-535-7648
Loop Clamp

145357648
006E298: RNCC: 3 | RNVC: 2

25 Jun 2003

5340-14-452-4790
Cover Strip

144524790
1110030013: RNCC: 3 | RNVC: 2
1110030013: RNCC: 5 | RNVC: 2

8 Jan 1992

5340-14-535-6592
Metal Grille

145356592
DA1N201794600: RNCC: 3 | RNVC: 2

13 Jun 2003

5340-14-500-5668
Mounting Plate

145005668
E63900000009: RNCC: 3 | RNVC: 2
F300 0T 024 5852: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-485-6462
Angle Bracket

144856462
20710582: RNCC: 3 | RNVC: 2

6 Feb 1997

5340-14-473-5990
Metal Grille

144735990
91073: RNCC: 3 | RNVC: 2

4 Jan 1995

5340-14-452-0612
Mounting Plate

144520612
86773: RNCC: 3 | RNVC: 2
86773: RNCC: 5 | RNVC: 2

18 Dec 1991

5340-14-360-2209
Doorknob

143602209
16293769: RNCC: 3 | RNVC: 2
16293769: RNCC: 5 | RNVC: 9

23 Nov 1979

5340-14-480-6305
Mounting Bracket

144806305
2022196: RNCC: 3 | RNVC: 2

21 Mar 1996

5340-14-257-8937
Retaining Strap

142578937
C955A13: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-349-9111
Angle Bracket

143499111
7975: RNCC: 3 | RNVC: 2

14 Jun 1978

5340-14-522-8540
Runner

145228540
8628GA266NI011: RNCC: 3 | RNVC: 2

1 Dec 2000

5340-14-513-4608
Access Cover

145134608
8819734000: RNCC: 3 | RNVC: 2

17 Mar 1999

5340-14-445-9655
Loop Clamp

144459655
1080451206: RNCC: 3 | RNVC: 2
1080451206: RNCC: 5 | RNVC: 2

27 Feb 1991

5340-14-528-5431
Mounting Bracket

145285431
1RA0136001CS: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-14-505-6335
Mounting Bracket

145056335
13174058: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-456-7863
Mounting Bracket

144567863
D59779: RNCC: 3 | RNVC: 2
D59779: RNCC: 5 | RNVC: 2

24 Jul 1992

5340-14-486-5109
Access Cover

144865109
10064305: RNCC: 3 | RNVC: 2

21 Mar 1997

5340-14-250-0413
Loop Clamp

142500413
0000130541: RNCC: 3 | RNVC: 2
0000130541: RNCC: 5 | RNVC: 9
130541: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-326-2481
Anchor Strap

143262481
NO PRIMARY REF14-326-2481: RNCC: 3 | RNVC: 2
812630: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-408-3636
Mending Plate

144083636
5229-022: RNCC: 3 | RNVC: 2
85-693-0964: RNCC: 6 | RNVC: 9

19 Mar 1986

5340-14-332-7532
Pawl Fastener

143327532
DP109SC: RNCC: 3 | RNVC: 2
A916384-001: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-285-1644
Threaded Rod End

142851644
A10-59-413-05-0: RNCC: 3 | RNVC: 2
A10-59-413-05-0: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-569-9911
Utility Resilient Mount

145699911
V1H-6100-01: RNCC: 3 | RNVC: 2

8 Nov 2011

5340-14-508-7506
Rod End Clevis

145087506
306-2R12G: RNCC: 3 | RNVC: 2
19207151: RNCC: 5 | RNVC: 9

30 Sep 1998

5340-14-533-5995
Angle Bracket

145335995
708010S100-50A: RNCC: 3 | RNVC: 2

12 Feb 2003

5340-14-328-5978
Angle Bracket

143285978
321A58-0824-23: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-332-3639
Angle Bracket

143323639
341A25-1030-29: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-411-1387
Rod End Clevis

144111387
SK30019-63: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-318-0940
Loop Clamp

143180940
M3R702-285: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-217-3343
Loop Clamp

142173343
3160S73-30-102: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-533-8805
Cover Strip

145338805
42-250-166: RNCC: 3 | RNVC: 2
SZ42.250.166: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-14-508-6589
Snap Hook

145086589
JGA04-41: RNCC: 3 | RNVC: 2

23 Sep 1998

5340-14-284-8635
Handwheel

142848635
NO PRIMARY REF14-284-8635: RNCC: 3 | RNVC: 2
PT1574: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-218-0287
Loop Clamp

142180287
NO PRIMARY REF14-218-0287: RNCC: 3 | RNVC: 2
291M500946: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-401-7361
Rim Lock Set

144017361
8658-00: RNCC: 3 | RNVC: 2

13 Jun 1985

5340-14-384-6684
Rod End Connector

143846684
16765555: RNCC: 3 | RNVC: 2
16765555: RNCC: 5 | RNVC: 9

2 Jun 1983

5340-14-508-5192
Pawl Fastener

145085192
10489348: RNCC: 3 | RNVC: 2

16 Sep 1998

5340-14-287-9172
Access Cover

142879172
4227-4: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-448-2531
Bumper

144482531
27110270-0: RNCC: 3 | RNVC: 2

18 Jun 1991

5340-14-222-1463
Retaining Strap

142221463
2-01631: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-043-1520
Quick Release Pin

140431520
065U20-730230D: RNCC: 3 | RNVC: 2

10 Apr 1984

5340-14-448-5178
Protection Bellows

144485178
MAT424-0197F21: RNCC: 3 | RNVC: 2

26 Jun 1991

5340-14-367-2483
Swivel Caster

143672483
N127-8NEAB: RNCC: 3 | RNVC: 9
N127-86AB: RNCC: 5 | RNVC: 9
MPRN127-8NEAB: RNCC: 5 | RNVC: 9

11 Dec 1980

5340-14-286-3894
Bumper

142863894
M208-25017: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-490-3793
Clamp Bolt Assembly

144903793
NO PRIMARY REF14-490-3793: RNCC: 3 | RNVC: 2
NNP5340844553923: RNCC: 5 | RNVC: 9

24 Sep 1997

5340-14-530-6905
Strap Fastener Loop

145306905
FRF891-005.01: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-14-337-9550
Strap Fastener Loop

143379550
A373-16: RNCC: 3 | RNVC: 2
A373-16: RNCC: 3 | RNVC: 9

6 Nov 1976

5340-14-256-4326
Pipe Hanger

142564326
C0LLIERAVIS35-6-35CHR0MATE: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-395-6931
Bumper

143956931
853-201-263-0: RNCC: 3 | RNVC: 2

30 Oct 1984

5340-14-339-4614
Mending Plate

143394614
502-514-046-0: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-511-6062
Loop Clamp

145116062
3-2633-03-32A: RNCC: 3 | RNVC: 2
3-2633-03-32A: RNCC: 5 | RNVC: 2

6 Jan 1999

5340-14-416-9014
Rod End Clevis

144169014
F317-21-02: RNCC: 3 | RNVC: 2

25 Jun 1987

5340-14-473-1890
Mounting Plate

144731890
27108262-7: RNCC: 3 | RNVC: 2

7 Dec 1994

5340-14-544-2642
Utility Access Door

145442642
0 363 02 047 0: RNCC: 3 | RNVC: 2

14 Jan 2005

5340-14-375-2477
Rod End Connector

143752477
50204460: RNCC: 3 | RNVC: 2
1011CM150A: RNCC: 5 | RNVC: 2

26 Feb 1982

5340-14-503-2390
Strap Fastener Loop

145032390
39117745: RNCC: 3 | RNVC: 9

7 Jan 1998

5340-14-551-4781
Mounting Plate

145514781
21233258-00: RNCC: 3 | RNVC: 2
21233258-7: RNCC: 5 | RNVC: 2

27 Sep 2006

5340-14-434-1785
Eye Hook

144341785
392791: RNCC: 3 | RNVC: 2
392791: RNCC: 5 | RNVC: 9

11 Sep 1989

5340-14-297-6042
Angle Bracket

142976042
901-700-2: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-423-7918
Quick Release Pin

144237918
29403859: RNCC: 3 | RNVC: 2

28 Apr 1988

5340-14-516-1994
Plug Button

145161994
555-13: RNCC: 3 | RNVC: 2
0020593: RNCC: 3 | RNVC: 2

15 Sep 1999

5340-14-405-3414
Access Cover

144053414
3511 190 84811: RNCC: 3 | RNVC: 2
3511-190-84811: RNCC: 5 | RNVC: 2

27 Nov 1985

5340-14-387-1110
Mounting Plate

143871110
VTR321-2-6111: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-216-3021
Retaining Strap

142163021
2228-36-14-00-14: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-548-1590
Mounting Bracket

145481590
B130-200-000A: RNCC: 3 | RNVC: 2

13 Dec 2005

5340-14-395-0252
Angle Bracket

143950252
853-200-472-0: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-470-4190
Angle Bracket

144704190
0390710460: RNCC: 3 | RNVC: 2

15 Jun 1994

5340-14-466-1425
Mounting Bracket

144661425
5240707: RNCC: 3 | RNVC: 2

27 Oct 1993

5340-14-551-8294
Mounting Plate

145518294
0064632800: RNCC: 3 | RNVC: 2

27 Oct 2006

5340-14-360-1904
Block Clamp

143601904
A11A704111030: RNCC: 3 | RNVC: 2

31 Oct 1979

5340-14-378-4964
Doorstop

143784964
72710BC18L80A: RNCC: 3 | RNVC: 2

11 Aug 1982

5340-14-403-4412
Bow Handle

144034412
8010200: RNCC: 3 | RNVC: 2
313004: RNCC: 5 | RNVC: 2

21 Aug 1985

5340-14-511-3593
Section Block Clamp

145113593
F702-31822: RNCC: 3 | RNVC: 2

16 Dec 1998

5340-14-480-6891
Mounting Plate

144806891
341A34-1109-21: RNCC: 3 | RNVC: 2

23 Mar 1996

5340-14-297-4579
Rim Lock Set

142974579
5315-5715-1GT: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-428-0562
Runner

144280562
B0204-037F18: RNCC: 3 | RNVC: 2

24 Nov 1988

5340-14-266-4516
Retaining Strap

142664516
95100403: RNCC: 3 | RNVC: 2
10-0027: RNCC: 5 | RNVC: 2
0003627028: RNCC: 5 | RNVC: 2
0027: RNCC: 5 | RNVC: 2
0003627028: RNCC: 5 | RNVC: 9
3627028: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-469-2201
Retaining Band

144692201
CA4031-1: RNCC: 3 | RNVC: 2
85-695-2863: RNCC: 6 | RNVC: 9

13 Apr 1994

5340-14-396-8293
Loop Clamp

143968293
15363-10: RNCC: 3 | RNVC: 2
15363-10: RNCC: 5 | RNVC: 9
15363-10: RNCC: 5 | RNVC: 9

27 Nov 1984

5340-14-433-6393
Rod End Clevis

144336393
M429-220301: RNCC: 3 | RNVC: 2

2 Aug 1989

5340-14-413-9937
Runner

144139937
13-203-02: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-286-8774
Rod End Clevis

142868774
A10-95-005-12-0: RNCC: 3 | RNVC: 2
A10-95-005-12-0: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-503-2270
Retaining Strap

145032270
510-0000-108: RNCC: 3 | RNVC: 2

7 Jan 1998

5340-14-520-4420
Access Cover

145204420
M45AA0101-582: RNCC: 3 | RNVC: 2
M45AA0101-582: RNCC: 5 | RNVC: 9

17 May 2000

5340-14-309-9818
Loop Clamp

143099818
1050-75-156-19-0: RNCC: 3 | RNVC: 2
75-156-19-0: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-14-511-1161
Runner

145111161
442799: RNCC: 3 | RNVC: 2
442799-001: RNCC: 5 | RNVC: 9

2 Dec 1998

5340-14-354-7909
Access Cover

143547909
NO PRIMARY REF14-354-7909: RNCC: 3 | RNVC: 2
1720049: RNCC: 5 | RNVC: 9

20 Feb 1979

5340-14-461-4528
Plate Spacer

144614528
BC100A270-108: RNCC: 3 | RNVC: 9
1003889F00: RNCC: 5 | RNVC: 2

10 Mar 1993

5340-14-367-2782
Detent Plunger

143672782
B0376-003F4: RNCC: 3 | RNVC: 2

11 Dec 1980

5340-14-486-0469
Mounting Bracket

144860469
430217: RNCC: 3 | RNVC: 2
430217-001: RNCC: 5 | RNVC: 9

26 Feb 1997

5340-14-342-6190
Rod End Connector

143426190
A11A263160116: RNCC: 3 | RNVC: 2

16 May 1977

5340-14-438-9668
Mounting Bracket

144389668
330A98-3318-00: RNCC: 3 | RNVC: 2

11 Apr 1990

5340-14-366-8681
Angle Bracket

143668681
330A22-2055-89: RNCC: 3 | RNVC: 2

20 Nov 1980

5340-14-465-4851
Mounting Bracket

144654851
365A24-1182-01: RNCC: 3 | RNVC: 2
85-695-1964: RNCC: 6 | RNVC: 9

30 Sep 1993

5340-14-499-4702
Retaining Bail

144994702
2-567105-1: RNCC: 3 | RNVC: 2
25671051: RNCC: 3 | RNVC: 2
F300 0T 022 7595: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-434-7696
Mounting Bracket

144347696
28188097000-18: RNCC: 3 | RNVC: 2

4 Oct 1989

5340-14-398-6433
Webbing Strap

143986433
E600-8M: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-14-244-8053
Butt Hinge

142448053
907-30X40: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-370-8978
Flush Catch Claw

143708978
366A25-1017-0001: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-441-0430
Bumper

144410430
090200005007018: RNCC: 3 | RNVC: 2
7700770659: RNCC: 5 | RNVC: 2
09020-00-05-00-7018: RNCC: 5 | RNVC: 2
9020-00-05-00: RNCC: 5 | RNVC: 2
09020-00-05-00-7018: RNCC: 5 | RNVC: 9
090200005007018: RNCC: 5 | RNVC: 9
9020-00-05-00: RNCC: 5 | RNVC: 9

16 Aug 1990

5340-14-369-2366
Retaining Strap

143692366
650-403-062-0: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-445-7323
Loop Clamp

144457323
3-2607-02-50A: RNCC: 3 | RNVC: 2
3-2607-02-50A: RNCC: 5 | RNVC: 9

25 Feb 1991

5340-14-260-4251
Loop Clamp

142604251
501-854-010-0: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-410-8512
Swivel Caster

144108512
PU250/80/80/6217/330MP250/5: RNCC: 3 | RNVC: 2
M4ZS645D1103B: RNCC: 5 | RNVC: 2
17250/80/80/6217/330MP17-250/5: RNCC: 5 | RNVC: 2
HMZ250-80-330-250/5: RNCC: 5 | RNVC: 2

16 Jul 1986

5340-14-299-3328
Loop Clamp

142993328
MY20516-12810: RNCC: 3 | RNVC: 2
MY20-516-12-810: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-409-5169
Mounting Bracket

144095169
341A84-5054-00: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-14-282-6992
Rod End Clevis

142826992
121E23-651-01-0: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-462-7684
Mending Plate

144627684
316-520-1: RNCC: 3 | RNVC: 9
85-693-8364: RNCC: 6 | RNVC: 9

28 Apr 1993

5340-14-542-0632
Loop Clamp

145420632
3830658-001: RNCC: 3 | RNVC: 2
502122007025A: RNCC: 3 | RNVC: 9
383 0658-001: RNCC: 5 | RNVC: 2

2 Jul 2004

5340-14-533-5272
Bumper

145335272
703A53-0000-24: RNCC: 3 | RNVC: 2

7 Feb 2003

5340-14-286-3488
Loop Clamp

142863488
51123105009: RNCC: 3 | RNVC: 2
243190900: RNCC: 5 | RNVC: 2
24GE9: RNCC: 5 | RNVC: 9
51123119009: RNCC: 5 | RNVC: 9
A0021-25GE9: RNCC: 5 | RNVC: 9
25GE9: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-264-3740
Angle Bracket

142643740
NO PRIMARY REF14-264-3740: RNCC: 3 | RNVC: 2
MA2-03-04-06: RNCC: 5 | RNVC: 2
MA2-03-04-06: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-381-5441
Webbing Strap

143815441
M376-520000: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-230-1090
Loop Clamp

142301090
675-308-140-0: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-471-0298
Loop Clamp

144710298
411728: RNCC: 3 | RNVC: 2
411728-001: RNCC: 5 | RNVC: 9

20 Jul 1994

5340-14-433-5091
Handwheel

144335091
ESM13-480-60: RNCC: 3 | RNVC: 2

2 Aug 1989

5340-14-331-7168
Angle Bracket

143317168
121E71-230-10-0: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-536-9952
Mounting Bracket

145369952
169E542-00: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-14-407-3505
Control Rod

144073505
4572-07: RNCC: 3 | RNVC: 2

12 Feb 1986

5340-14-513-6412
Elastic Strap

145136412
IT004KAKI: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-14-552-4986
Stand Base

145524986
49251: RNCC: 3 | RNVC: 2

9 Jan 2007

5340-14-362-3843
Mounting Plate

143623843
5000050154: RNCC: 3 | RNVC: 2
5000050154: RNCC: 5 | RNVC: 9

19 Mar 1980

5340-14-332-4451
Retaining Bail

143324451
36149: RNCC: 3 | RNVC: 9

2 Jul 1975

5340-14-437-8190
Elastic Strap

144378190
4771622350: RNCC: 3 | RNVC: 2

21 Feb 1990

5340-14-397-9666
Retaining Strap

143979666
22379414: RNCC: 3 | RNVC: 2
22379414: RNCC: 5 | RNVC: 9

31 Jan 1985

5340-14-372-1709
Surface Bolt

143721709
16-7-3478: RNCC: 3 | RNVC: 2

1 Sep 1981

5340-14-540-6154
Mounting Bracket

145406154
38052130: RNCC: 3 | RNVC: 2
321865: RNCC: 5 | RNVC: 2
4848ZG8613180147: RNCC: 6 | RNVC: 9

8 Apr 2004

5340-14-349-3485
Angle Bracket

143493485
16398848: RNCC: 3 | RNVC: 2
16398848: RNCC: 3 | RNVC: 9

22 May 1978

5340-14-542-5156
Exit Bolt

145425156
1SH41820305: RNCC: 3 | RNVC: 2

21 Jul 2004

5340-14-463-7184
Pawl Fastener

144637184
207027: RNCC: 3 | RNVC: 2
89170756: RNCC: 5 | RNVC: 2

23 Jun 1993

5340-14-401-5462
Retaining Strap

144015462
219213: RNCC: 3 | RNVC: 2

13 Jun 1985

5340-14-551-2673
Angle Bracket

145512673
RA1M702606071: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-448-4742
Mounting Bracket

144484742
5000921428: RNCC: 3 | RNVC: 2

26 Jun 1991

5340-14-368-2794
Angle Bracket

143682794
F04955-5: RNCC: 3 | RNVC: 2

20 Feb 1981

5340-14-266-5045
Angle Bracket

142665045
70855011: RNCC: 3 | RNVC: 2
70855011: RNCC: 5 | RNVC: 9
855011: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-379-9229
Butt Hinge

143799229
1-60X50DROITELAITONNICKELE: RNCC: 3 | RNVC: 2

20 Oct 1982

5340-14-353-2787
Runner

143532787
91476758: RNCC: 3 | RNVC: 2

8 Dec 1978

5340-14-447-4743
Loop Clamp

144474743
BK15A60004F9BDF04REP1A4: RNCC: 3 | RNVC: 2

15 May 1991

5340-14-434-3046
Mounting Bracket

144343046
553491: RNCC: 3 | RNVC: 2

20 Sep 1989

5340-14-484-7676
Retaining Clip

144847676
PM1A718510014: RNCC: 3 | RNVC: 2
PM1A718510014: RNCC: 5 | RNVC: 2

5 Dec 1996

5340-14-402-7238
Retaining Strap

144027238
224222: RNCC: 3 | RNVC: 2

19 Jul 1985

5340-14-474-6704
Mounting Plate

144746704
29779855: RNCC: 3 | RNVC: 9

22 Feb 1995

5340-14-476-9548
Cover Strip

144769548
RA1M246510305: RNCC: 3 | RNVC: 2

12 Jul 1995

5340-14-493-4559
Mounting Plate

144934559
410743: RNCC: 3 | RNVC: 2
F300 0T 013 1063: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-321-7243
Mending Plate

143217243
202623: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-211-1383
Retaining Strap

142111383
25158: RNCC: 3 | RNVC: 2

1 Jan 1964

5340-14-545-4561
Angle Bracket

145454561
RA1M703880151N1: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-14-413-9544
Loop Clamp

144139544
5624: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-384-6518
Mounting Plate

143846518
16773622: RNCC: 3 | RNVC: 2

2 Jun 1983

5340-14-384-6608
Mounting Plate

143846608
16324796: RNCC: 3 | RNVC: 2
16324796: RNCC: 5 | RNVC: 9

2 Jun 1983

5340-14-244-5504
Retaining Strap

142445504
6816: RNCC: 3 | RNVC: 9
916152700: RNCC: 5 | RNVC: 2
6816: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-450-4880
Mounting Bracket

144504880
5172226800: RNCC: 3 | RNVC: 2

9 Oct 1991

5340-14-313-1706
Runner

143131706
17608184: RNCC: 3 | RNVC: 2
17608184: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-382-2530
Mounting Plate

143822530
0000569818: RNCC: 3 | RNVC: 2
569818: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-527-3596
Loop Clamp

145273596
C103487B: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-14-317-2716
Retaining Strap

143172716
2187-800A566: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-512-4086
Mounting Bracket

145124086
F00165440: RNCC: 3 | RNVC: 2
F00165440: RNCC: 5 | RNVC: 9

15 Feb 1999

5340-14-288-3214
Angle Bracket

142883214
428821: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-477-2723
Loop Clamp

144772723
TEC0309: RNCC: 3 | RNVC: 2
RAB8611: RNCC: 5 | RNVC: 2

3 Aug 1995

5340-14-031-1002
Runner

140311002
606047001: RNCC: 3 | RNVC: 2

14 Jun 1980

5340-14-394-6416
Mounting Bracket

143946416
79107361: RNCC: 3 | RNVC: 2
79107361: RNCC: 5 | RNVC: 9

28 Aug 1984

5340-14-346-8768
Bridge Clamp

143468768
26251557: RNCC: 3 | RNVC: 2

19 Jan 1978

5340-14-497-4113
Mounting Bracket

144974113
1011210: RNCC: 3 | RNVC: 2
1011210: RNCC: 5 | RNVC: 2
F300 0T 023 1409: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-549-9782
Corner Brace

145499782
1091179: RNCC: 3 | RNVC: 2

22 May 2006

5340-14-392-9892
Loop Clamp

143929892
0022111113: RNCC: 3 | RNVC: 2

12 Apr 1984

5340-14-492-5586
Retaining Strap

144925586
5000988256: RNCC: 3 | RNVC: 2
F300 0T 007 9832: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-482-7219
Bumper

144827219
1098248N00: RNCC: 3 | RNVC: 2

25 Jul 1996

5340-14-336-4787
Retaining Strap

143364787
195156: RNCC: 3 | RNVC: 2

14 Aug 1976

5340-14-357-1806
Quick Release Pin

143571806
625S9B17: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-14-415-5923
Plug Button

144155923
934A10-1: RNCC: 3 | RNVC: 2

18 May 1987

5340-14-457-8894
Synchro Clamp

144578894
291-2: RNCC: 3 | RNVC: 2

26 Sep 1992

5340-14-503-1073
Loop Clamp

145031073
A0021-20S03: RNCC: 3 | RNVC: 2

7 Jan 1998

5340-14-393-8351
Loop Clamp

143938351
51300005045: RNCC: 3 | RNVC: 2
11N45: RNCC: 5 | RNVC: 2
A0021-11N45: RNCC: 5 | RNVC: 2

23 Jun 1984

5340-14-549-5028
Runner

145495028
MC201-215274-32: RNCC: 3 | RNVC: 2

11 Apr 2006

5340-14-472-9926
Access Cover

144729926
27108370-2: RNCC: 3 | RNVC: 2

23 Nov 1994

5340-14-544-3211
Mounting Bracket

145443211
0 363 02 068 0: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-14-270-9972
Quick Release Pin

142709972
574-1: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-264-1717
Loop Clamp

142641717
55218-304D507DB: RNCC: 3 | RNVC: 2
55218-304-001DB: RNCC: 5 | RNVC: 2
55218-304N: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-541-3197
Snap Hook

145413197
5145.00.10: RNCC: 3 | RNVC: 2

27 May 2004

5340-14-520-3597
Eye Hook

145203597
5230171: RNCC: 3 | RNVC: 2

17 May 2000

5340-14-441-9348
Strap Fastener Loop

144419348
715126: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-14-476-6020
Pin Removable Head

144766020
23CESLASMCRH012REP47: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-14-517-2133
Loop Clamp

145172133
210601450: RNCC: 3 | RNVC: 2
9560170930: RNCC: 5 | RNVC: 2
21F14-5: RNCC: 5 | RNVC: 9

17 Nov 1999

5340-14-550-5805
Synchro Clamp

145505805
01-0952256: RNCC: 3 | RNVC: 2

28 Jun 2006

5340-14-436-0943
Retaining Band

144360943
H80370-11: RNCC: 3 | RNVC: 2

5 Dec 1989

5340-14-541-5161
Angle Bracket

145415161
1091444-001: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-340-3326
Pipe Hanger

143403326
M3C704-228: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-461-5936
Mounting Bracket

144615936
BC100A280-104: RNCC: 3 | RNVC: 9
1009326L00: RNCC: 5 | RNVC: 2

17 Mar 1993

5340-14-490-2962
Mounting Bracket

144902962
J05085-03-0400P001: RNCC: 3 | RNVC: 2

24 Sep 1997

5340-14-373-1069
Angle Bracket

143731069
330A58-3616-20: RNCC: 3 | RNVC: 2

21 Sep 1981

5340-14-330-4041
Butt Hinge

143304041
Z355-014-000: RNCC: 3 | RNVC: 2
Z355-014: RNCC: 5 | RNVC: 2

2 Jul 1975

5340-14-336-9852
Loop Clamp

143369852
M3R702-091: RNCC: 3 | RNVC: 2

7 Oct 1976

5340-14-416-1593
Mounting Plate

144161593
M259-31039: RNCC: 3 | RNVC: 2
M330-10012: RNCC: 5 | RNVC: 2

3 Jun 1987

5340-14-424-8723
Mounting Plate

144248723
355A53-3026-20: RNCC: 3 | RNVC: 2

9 Jun 1988

5340-14-239-4361
Cover Strip

142394361
321A25-0002-20: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-253-8881
Locking Stay

142538881
LN331087-3221213: RNCC: 2 | RNVC: 2
LN331087-3221213: RNCC: 3 | RNVC: 2
32-212-13: RNCC: 5 | RNVC: 2
LN331087-3221213: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-504-3553
Bridge Clamp

145043553
EA5M701-15-641: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-372-1353
Access Cover

143721353
2704-40-01: RNCC: 3 | RNVC: 2

1 Sep 1981

5340-14-409-6484
Bail Handle

144096484
2095-101B514: RNCC: 3 | RNVC: 2
2095-101B514: RNCC: 5 | RNVC: 2

28 May 1986

5340-14-541-9684
Mounting Plate

145419684
20008-588: RNCC: 3 | RNVC: 2
502105005007A: RNCC: 3 | RNVC: 9
2 0008-588: RNCC: 5 | RNVC: 2

2 Jul 2004

5340-14-465-7526
Retaining Band

144657526
851-600-822-0: RNCC: 3 | RNVC: 2

14 Oct 1993

5340-14-465-9687
Butt Hinge

144659687
3511 310 82741: RNCC: 3 | RNVC: 2
3511-310-82741: RNCC: 5 | RNVC: 2

26 Oct 1993

5340-14-509-8497
Handle Grip

145098497
SA131-01-02-010: RNCC: 3 | RNVC: 2
SA13-1-01-02-010: RNCC: 5 | RNVC: 2
5340AA1044993: RNCC: 6 | RNVC: 9

4 Nov 1998

Load More Results