What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Spring Window Bolt?

A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

Hardware, Commercial - France (FR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by France (FR) - NCB is 14

Page 89 of 446

NSN Format for Hardware, Commercial
Codified by France

53	40	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - France (FR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 93 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 689 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 528 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 203 Items
Holder,Loop 112 Items
Holder,Spring 94 Items
What is a Compression Cup? 218 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 871 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 36 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 45 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 3685 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 345 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 606 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 47 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 6198 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Stake Pocket? 19 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 318 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 516 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 96 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 168 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 303 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 453 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 35 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Mortise Bolt? 14 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 26 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 11 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 32 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Cane Bolt? 33 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Thumb Latch? 16 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 130 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Spring Window Bolt? 131 Items: A Spring Window Bolt (BOLT,WINDOW,SPRING) is a bolt with a cylindrical bar sliding in a case containing a spring which holds the bar in the thrown position. The bar is retracted manually by means of a knob on one end. It is usually designed for mortised installation, but may be surface mounted. Excludes BOLT, BARREL.
What is an Elbow Catch? 13 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 106 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 109 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 13 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 51 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 99 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 244 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 41 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 101 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 51 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 71 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Doorknob? 98 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 183 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 161 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 48 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 18 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 40 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 26 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 1241 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 96 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Stake Driving Cap? 10 Items: A Stake Driving Cap (CAP,STAKE DRIVING) is a metal device specifically designed to be used when driving stakes; fits closely over the top of the stake and prevents bending, brooming, or other damage.
What is a Rim Latch Set? 58 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 402 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 73 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 149 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 2293 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 132 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 44 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 875 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 1067 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 28 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 37 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 52 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 417 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 913 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 1920 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 2650 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1771 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 63 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 207 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 35 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 42 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 46 Items
What is a Blank Panel? 596 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 386 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 69 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 96 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 581 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 620 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 19 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 12 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is an Angle Bracket? 10942 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 67 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 276 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 484 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 307 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 9426 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 390 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 207 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 11 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 32 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 49 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 10 Items
What is a Dust And Moisture Seal Boot? 151 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 234 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 337 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 27 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 26 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 205 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 77 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1068 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 25 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is an Escutcheon Plate? 36 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 33 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 139 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 144 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 673 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 114 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 1529 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 27 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 34 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 390 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2355 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 352 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 238 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 2309 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1475 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 44 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 15 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 409 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 38 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 315 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 93 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 2586 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 92 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 60 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 29 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 2079 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 506 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 581 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 733 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 1216 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 94 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 47 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 10 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 54 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 847 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 94 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is an Extension Drawer Slide? 534 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 35 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 204 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 155 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 13162 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 133 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 443 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 56 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 22 Items
What is an Antipilferage Seal? 134 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 1938 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 46 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 465 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 51 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 227 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 16 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 39 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 124 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 55 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 587 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 35 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 19712 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Block Fairlead Section? 33 Items: A Block Fairlead Section (FAIRLEAD SECTION,BLOCK) is a single piece of a multipiece FAIRLEAD, BLOCK.
What is an Elastic Strap? 75 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 32 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 468 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Engine 13 Items
What is a Retaining Bail? 229 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Beam Gripping Clamp? 14 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 10998 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 967 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 2520 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 37 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 5516 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 2582 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 35 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 18 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 28 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 40 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 332 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 19 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 52 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 25 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 2461 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 2050 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 13 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 16 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 85 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Mechanic Equipment Hardware Kit? 992 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 16 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 22 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 122 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 22 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 10 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Masking Plate? 11 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 774 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 459 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Pin Removable Head? 19 Items: A Pin Removable Head (HEAD,REMOVABLE,PIN) is an item of various shapes and sizes which is fixed, so that it can be removed, to the end of a pin. It is designed to secure the pin, for example, in a hinge.
What is an Electromagnetic Lock? 22 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 54 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 11 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 64 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 17 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Clamping Catch Fastener? 22 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is a Safety Cable Kit? 24 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 62 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Perforated Panel Accessory? 47 Items: A Perforated Panel Accessory is an item of various configurations such as a hook, rack, or basket, and the like. The item when mounted on a PANEL, PERFORATED allows for the storage or displaying various types of equipment such as tools, and the like.
What is a Positioning Thrust Stop? 167 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Positioning Thrust Stop Half? 35 Items: A Positioning Thrust Stop Half (STOP HALF,THRUST,POSITIONING) is a half part of a STOP, THRUST, POSIITONING which mates with another part to form a stop positioning assembly.
What is a Cover Strip? 1572 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is an Utility Access Door? 1059 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Pawl Fastener Set? 34 Items: A Pawl Fastener Set (FASTENER SET,PAWL) is an item consisting of two or more FASTENER, PAWL of different shapes or sizes.
What is an Utility Resilient Mount? 2841 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 18 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Hand Crank Arm? 69 Items: A Hand Crank Arm (ARM,HAND CRANK) is a radial arm designed to be used with a HANDLE, CRANK parallel to its axis for transmitting motion to a shaft or other object. For items with an integral handle, see CRANK, HAND.
What is a Flush Catch Claw? 308 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 359 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 95 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 132 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 53 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 40 Items
What is a Key Blank? 97 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 29 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 92 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 795 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 16 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 22 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 741 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 13 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 85 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 124 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 27 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Tie Down Adapter? 36 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 42 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 282 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 34 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 34 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 13 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 20 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 3138 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Coating Plate? 26 Items: A Coating Plate (PLATE,COATING) is a metallic or non-metallic item which is rigid or semi rigid and generally smooth. Its thickness is small in comparison to its length and width. It is designed for coating another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface.

Stock Items From Supply Class 5340 Page 89 of 446

5340-14-250-6271
Mending Plate

142506271
147-02-01-303: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-14-315-1595
Cover Strip

143151595
160-12268: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-512-5842
Mounting Bracket

145125842
3BM04699AAAA: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-447-4225
Protection Bellows

144474225
NGS1E6001: RNCC: 3 | RNVC: 2

15 May 1991

5340-14-312-9751
Webbing Strap

143129751
18829: RNCC: 3 | RNVC: 2
5800400212: RNCC: 5 | RNVC: 2
7701013098: RNCC: 5 | RNVC: 2
5800400212: RNCC: 5 | RNVC: 9
7701013098: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-323-5739
Webbing Strap

143235739
001742221P: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-546-7647
Angle Bracket

145467647
RA1M705236501: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-14-509-2028
Runner

145092028
S000061: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-14-431-1600
Access Cover

144311600
210789: RNCC: 3 | RNVC: 2

10 Apr 1989

5340-14-382-2365
Angle Bracket

143822365
A11A221160520: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-451-5018
Runner

144515018
3510-79100: RNCC: 3 | RNVC: 9

21 Nov 1991

5340-14-382-9255
Anchor Strap

143829255
4770202250: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-244-9841
Retaining Strap

142449841
PR3: RNCC: 3 | RNVC: 9

1 Jan 1968

5340-14-411-3810
Cover Strip

144113810
DA2C281730027A2: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-514-8561
Section Block Clamp

145148561
RA1M122111351: RNCC: 3 | RNVC: 2

22 Jun 1999

5340-14-552-8803
Mounting Plate

145528803
82175856000: RNCC: 3 | RNVC: 2

10 Feb 2007

5340-14-344-6352
Retaining Strap

143446352
BFC20080: RNCC: 3 | RNVC: 2

9 Sep 1977

5340-14-504-2779
Loop Clamp

145042779
3614048M1: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-550-5795
Loop Clamp

145505795
2191906122: RNCC: 3 | RNVC: 2

27 Jun 2006

5340-14-305-6261
Butt Hinge

143056261
40BC40X30: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-411-5253
Mounting Plate

144115253
ST471M311P14: RNCC: 3 | RNVC: 2
ST471M311P14: RNCC: 5 | RNVC: 9

20 Aug 1986

5340-14-522-5931
Mounting Bracket

145225931
24850057: RNCC: 3 | RNVC: 2

8 Nov 2000

5340-14-423-9375
Buckle

144239375
221263: RNCC: 3 | RNVC: 2
121813: RNCC: 5 | RNVC: 2

5 May 1988

5340-14-377-5393
Angle Bracket

143775393
A21A232260010: RNCC: 3 | RNVC: 2

17 May 1982

5340-14-270-8152
Angle Bracket

142708152
C247534: RNCC: 3 | RNVC: 2
26247534: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-279-6233
Loop Clamp

142796233
5701: RNCC: 3 | RNVC: 2
D144: RNCC: 5 | RNVC: 2
EA20470: RNCC: 5 | RNVC: 2
0XY753: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-395-0743
Mounting Plate

143950743
D50202: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-537-4662
Bumper

145374662
6501JPS110002: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-14-507-7790
Mounting Plate

145077790
47136394: RNCC: 3 | RNVC: 2

12 Aug 1998

5340-14-549-5483
Rim Lock

145495483
EPIPREE460005: RNCC: 3 | RNVC: 2

13 Apr 2006

5340-14-383-3162
Access Cover

143833162
33085: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-14-428-1932
Control Rod

144281932
152664: RNCC: 3 | RNVC: 9

3 Dec 1988

5340-14-417-0769
Retaining Strap

144170769
230728: RNCC: 3 | RNVC: 2

1 Jul 1987

5340-14-516-6864
Metal Grille

145166864
46945158: RNCC: 3 | RNVC: 2

12 Oct 1999

5340-14-411-4110
Cover Strip

144114110
MY2055217511G01: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-529-9594
Retaining Strap

145299594
1108382X00: RNCC: 3 | RNVC: 2

24 Apr 2002

5340-14-533-1250
Angle Bracket Set

145331250
31100378: RNCC: 3 | RNVC: 2
31100378: RNCC: 5 | RNVC: 2

23 Jan 2003

5340-14-410-6004
Webbing Strap

144106004
006392050P: RNCC: 3 | RNVC: 2

9 Jul 1986

5340-14-514-0781
Pawl Fastener Set

145140781
PM1A005001N33: RNCC: 3 | RNVC: 2
PM1A005001N33: RNCC: 5 | RNVC: 2
MJCR: RNCC: 5 | RNVC: 9

22 Apr 1999

5340-14-520-6211
Mending Plate

145206211
C46300-2: RNCC: 3 | RNVC: 2

24 May 2000

5340-14-514-1729
Loop Clamp

145141729
15261-2436-0: RNCC: 3 | RNVC: 2

28 Apr 1999

5340-14-317-7099
Rod End Connector

143177099
466-8M16P159PASAGAUCHE: RNCC: 3 | RNVC: 2
466-8M16P159PASAGAUCHE: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-388-1446
Loop Clamp

143881446
2-16383: RNCC: 3 | RNVC: 2

12 Oct 1983

5340-14-479-4960
Access Cover

144794960
27138824-8: RNCC: 3 | RNVC: 2

17 Jan 1996

5340-14-386-9650
Webbing Strap

143869650
1350: RNCC: 3 | RNVC: 9

24 Aug 1983

5340-14-503-4456
Mounting Plate

145034456
NNP53404553332: RNCC: 3 | RNVC: 2

14 Jan 1998

5340-14-511-9987
Mounting Bracket

145119987
0053580: RNCC: 3 | RNVC: 2
8017898: RNCC: 3 | RNVC: 9

2 Feb 1999

5340-14-542-9947
Butt Hinge

145429947
85.7.2315: RNCC: 3 | RNVC: 2

18 Aug 2004

5340-14-446-1445
T Bracket

144461445
45611452: RNCC: 3 | RNVC: 2
45611452: RNCC: 5 | RNVC: 9

6 Mar 1991

5340-14-366-4584
Rod End Connector

143664584
131500K: RNCC: 3 | RNVC: 2

20 Nov 1980

5340-14-502-9721
Angle Bracket

145029721
307-876-901-0: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-522-1633
Eye Hook

145221633
4CR101PN: RNCC: 3 | RNVC: 2

5 Oct 2000

5340-14-416-6107
Retaining Strap

144166107
2-32451: RNCC: 3 | RNVC: 2

22 Jun 1987

5340-14-301-5195
Loop Clamp

143015195
915-1-32-32: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-377-8618
Casement Fastener

143778618
350AVF15: RNCC: 3 | RNVC: 2
85-692-1185: RNCC: 6 | RNVC: 9

10 Jun 1982

5340-14-353-7085
Loop Clamp

143537085
51110605011: RNCC: 3 | RNVC: 2
25F11: RNCC: 5 | RNVC: 2
9560128690: RNCC: 5 | RNVC: 2
302-489-801-0: RNCC: 5 | RNVC: 2

16 Jan 1979

5340-14-370-2535
Pipe Hanger

143702535
303-929-401-0: RNCC: 3 | RNVC: 2

18 May 1981

5340-14-541-9744
Loop Clamp

145419744
20019-921: RNCC: 3 | RNVC: 2
502104X01008A: RNCC: 3 | RNVC: 9
2 0019-921: RNCC: 5 | RNVC: 2

2 Jul 2004

5340-14-449-0091
Loop Clamp

144490091
NO PRIMARY REF14-449-0091: RNCC: 3 | RNVC: 2
89280814: RNCC: 5 | RNVC: 2
300A99351: RNCC: 5 | RNVC: 9

24 Jul 1991

5340-14-549-8363
Mounting Bracket

145498363
169E429-01: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-462-8334
Metal Grille

144628334
GR-CL/FL 211241005 REP3: RNCC: 3 | RNVC: 2

4 May 1993

5340-14-300-4138
Locking Stay

143004138
14-125-070-05: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-232-1011
Access Cover

142321011
NO PRIMARY REF14-232-1011: RNCC: 3 | RNVC: 2
M11035-10: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-424-1306
Mending Plate

144241306
NO PRIMARY REF14-424-1306: RNCC: 3 | RNVC: 2
528935: RNCC: 5 | RNVC: 9

17 May 1988

5340-14-303-5157
Butt Hinge

143035157
3160S23-10-117: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-529-5470
Rod End Clevis

145295470
330A87-3817-20: RNCC: 3 | RNVC: 2

29 Mar 2002

5340-14-449-3961
Butt Hinge

144493961
MY20167-10: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-14-274-3308
Angle Bracket

142743308
5770-540SF: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-256-4323
Pipe Hanger

142564323
C0LLIERAVIS24-6-35CHR0MATE: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-218-0278
Angle Bracket

142180278
291M521239: RNCC: 3 | RNVC: 2
291M521239: RNCC: 5 | RNVC: 2

1 Jan 1965

5340-14-484-4380
Access Cover

144844380
803858: RNCC: 3 | RNVC: 2
258038580: RNCC: 5 | RNVC: 2

14 Nov 1996

5340-14-512-9146
Bow Handle

145129146
562391: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-14-349-2485
Retaining Strap

143492485
1182169: RNCC: 3 | RNVC: 2
1182169: RNCC: 5 | RNVC: 2

22 May 1978

5340-14-550-1762
Bumper

145501762
511880: RNCC: 3 | RNVC: 2

6 Jun 2006

5340-14-401-1904
Access Cover

144011904
79099484: RNCC: 3 | RNVC: 2
79099484: RNCC: 5 | RNVC: 9

29 May 1985

5340-14-485-5462
Bow Handle

144855462
20386184: RNCC: 3 | RNVC: 2

29 Jan 1997

5340-14-554-0639
Mounting Plate

145540639
483 113: RNCC: 3 | RNVC: 2
483 113: RNCC: 3 | RNVC: 2

8 Jun 2007

5340-14-550-2509
Mounting Bracket

145502509
82092584000: RNCC: 3 | RNVC: 2

13 Jun 2006

5340-14-474-3980
Pipe Hanger

144743980
1682386002: RNCC: 3 | RNVC: 2
RAB3618: RNCC: 5 | RNVC: 2

15 Feb 1995

5340-14-355-2976
Butt Hinge

143552976
16534473: RNCC: 3 | RNVC: 2
16534473: RNCC: 5 | RNVC: 9

19 Mar 1979

5340-14-545-2955
Mounting Bracket

145452955
S304A2024101: RNCC: 3 | RNVC: 2

1 Apr 2005

5340-14-510-7746
Angle Bracket

145107746
259707: RNCC: 3 | RNVC: 2

12 Nov 1998

5340-14-333-8070
Angle Bracket

143338070
193183: RNCC: 3 | RNVC: 2

23 Apr 1976

5340-14-506-3086
Mounting Bracket

145063086
10424176: RNCC: 3 | RNVC: 2

22 Apr 1998

5340-14-377-1432
Access Cover

143771432
3075494: RNCC: 3 | RNVC: 2

17 May 1982

5340-14-405-2516
Runner

144052516
1210414: RNCC: 3 | RNVC: 2

27 Nov 1985

5340-14-541-5327
Mounting Bracket

145415327
1091644: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-536-1479
Loop Clamp

145361479
4518-5302: RNCC: 3 | RNVC: 2

9 Jul 2003

5340-14-516-6491
Mounting Plate

145166491
46944540: RNCC: 3 | RNVC: 2

8 Oct 1999

5340-14-400-0858
Angle Bracket

144000858
214169: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-344-2513
Angle Bracket

143442513
28310: RNCC: 3 | RNVC: 2
71141: RNCC: 5 | RNVC: 2

10 Aug 1977

5340-14-375-1418
Pipe Hanger

143751418
A21A221372040: RNCC: 3 | RNVC: 2

30 Jan 1982

5340-14-502-5054
Loop Clamp

145025054
5000447963: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-516-2709
Mounting Bracket

145162709
TA5042P001: RNCC: 3 | RNVC: 2

15 Sep 1999

5340-14-231-0925
Loop Clamp

142310925
51200005018: RNCC: 3 | RNVC: 2
10N18: RNCC: 5 | RNVC: 2

1 Jan 1967

5340-14-544-0629
Mounting Bracket

145440629
5010604055: RNCC: 3 | RNVC: 2

24 Dec 2004

5340-14-503-9936
Mounting Bracket

145039936
SUPPO93889A00: RNCC: 3 | RNVC: 2

4 Feb 1998

5340-14-382-9123
Mounting Plate

143829123
147993: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-455-9429
Synchro Clamp

144559429
PM1A761160213: RNCC: 3 | RNVC: 2
PM1A761160213: RNCC: 5 | RNVC: 2

11 Jun 1992

5340-14-526-6070
Lock Bolt

145266070
00599: RNCC: 3 | RNVC: 9
3R 52 852: RNCC: 5 | RNVC: 9

3 Aug 2001

5340-14-521-2965
Mounting Bracket

145212965
10497952: RNCC: 3 | RNVC: 2

19 Jul 2000

5340-14-481-2243
Access Cover

144812243
48 04 50: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-14-353-4670
Access Cover

143534670
180325: RNCC: 3 | RNVC: 2

16 Jan 1979

5340-14-424-2216
Retaining Strap

144242216
535883: RNCC: 3 | RNVC: 2

19 May 1988

5340-14-285-5841
Webbing Strap

142855841
1916M050: RNCC: 3 | RNVC: 2
16164: RNCC: 3 | RNVC: 2
1916M050: RNCC: 5 | RNVC: 2

1 Jan 1972

5340-14-486-5302
Mounting Bracket

144865302
29778557: RNCC: 3 | RNVC: 2
29778557: RNCC: 5 | RNVC: 9

21 Mar 1997

5340-14-473-9429
Mounting Bracket

144739429
20858397: RNCC: 3 | RNVC: 2
20858397: RNCC: 3 | RNVC: 9

18 Jan 1995

5340-14-274-3823
Quick Release Pin

142743823
573-1: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-365-7005
Retaining Strap

143657005
7701402141: RNCC: 3 | RNVC: 2

8 Oct 1980

5340-14-369-7917
Clamping Catch

143697917
LH91019: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-275-2034
Mending Plate

142752034
26246883: RNCC: 3 | RNVC: 2
540247: RNCC: 5 | RNVC: 2
C246883: RNCC: 5 | RNVC: 2

1 Jan 1971

5340-14-403-4985
Access Cover

144034985
22445739: RNCC: 3 | RNVC: 2
22445739: RNCC: 5 | RNVC: 9

21 Aug 1985

5340-14-554-8853
Loop Clamp

145548853
78651RH28CP: RNCC: 1 | RNVC: 2
78651RH28CP: RNCC: 3 | RNVC: 2

4 Sep 2007

5340-14-266-4583
Angle Bracket

142664583
450620: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-469-6432
Mounting Plate

144696432
PM1A584200102: RNCC: 3 | RNVC: 2
PM1A584200102: RNCC: 5 | RNVC: 2

4 May 1994

5340-14-339-3034
Expansion Plug

143393034
BNCUDIAM14HSS: RNCC: 3 | RNVC: 2
7700500964: RNCC: 5 | RNVC: 2
7700500964: RNCC: 5 | RNVC: 9

18 Jan 1977

5340-14-317-8665
Loop Clamp

143178665
51215305024: RNCC: 3 | RNVC: 2
20S24: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-540-7274
Mounting Bracket

145407274
38051408: RNCC: 3 | RNVC: 2
438837: RNCC: 5 | RNVC: 2
4848ZG8613181205: RNCC: 6 | RNVC: 9

22 Apr 2004

5340-14-541-5267
Angle Bracket

145415267
1091578: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-14-538-0387
Mounting Bracket

145380387
121339: RNCC: 3 | RNVC: 2

9 Dec 2003

5340-14-216-6872
Retaining Strap

142166872
0602989600: RNCC: 3 | RNVC: 2
0602989600: RNCC: 3 | RNVC: 2
6029896: RNCC: 5 | RNVC: 2
0602989600: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-511-6193
Angle Bracket

145116193
RA1M703365315: RNCC: 3 | RNVC: 2

6 Jan 1999

5340-14-544-6222
Mounting Bracket

145446222
072944987000015: RNCC: 3 | RNVC: 2

14 Feb 2005

5340-14-227-8635
Webbing Strap

142278635
13N181: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-514-0385
Angle Bracket

145140385
PM1A713120151: RNCC: 3 | RNVC: 2
PM1A713120151: RNCC: 5 | RNVC: 2

22 Apr 1999

5340-14-460-2045
Mounting Bracket

144602045
LN446012REP2BIS: RNCC: 3 | RNVC: 2
RAB0291: RNCC: 5 | RNVC: 2

15 Jan 1993

5340-14-505-7340
Runner

145057340
7700694002: RNCC: 3 | RNVC: 2

26 Mar 1998

5340-14-375-1826
Retaining Strap

143751826
16047322: RNCC: 3 | RNVC: 2

26 Feb 1982

5340-14-474-4690
Rigid Caster

144744690
6202014301: RNCC: 3 | RNVC: 2
F300 0T 015 4554: RNCC: 5 | RNVC: 9

15 Feb 1995

5340-14-481-4599
Angle Bracket

144814599
34 70 44: RNCC: 3 | RNVC: 2

8 May 1996

5340-14-325-6046
Control Rod

143256046
68921C: RNCC: 3 | RNVC: 2
68921: RNCC: 3 | RNVC: 9
0003537010: RNCC: 5 | RNVC: 2
0003537010: RNCC: 5 | RNVC: 9
3537010: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-422-5928
Mounting Plate

144225928
547811: RNCC: 3 | RNVC: 2

10 Mar 1988

5340-14-439-6717
Mounting Bracket

144396717
16296436: RNCC: 3 | RNVC: 2
16296436: RNCC: 5 | RNVC: 9

16 May 1990

5340-14-423-7923
Quick Release Pin

144237923
29400210: RNCC: 3 | RNVC: 2

28 Apr 1988

5340-14-409-1756
Bow Handle

144091756
250-85MMCHROMEE: RNCC: 3 | RNVC: 2

23 Apr 1986

5340-14-473-3206
Angle Bracket

144733206
504B206: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-14-548-8460
Bail Handle

145488460
733 500: RNCC: 3 | RNVC: 2

17 Feb 2006

5340-14-517-5443
Mounting Bracket

145175443
206966: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-14-536-1531
Mounting Bracket

145361531
1088-12639: RNCC: 3 | RNVC: 2

9 Jul 2003

5340-14-258-3008
Angle Bracket

142583008
ST406M71P17E11-2: RNCC: 3 | RNVC: 2

1 Jan 1969

5340-14-532-1016
Angle Bracket

145321016
1SH41767308: RNCC: 3 | RNVC: 2

9 Oct 2002

5340-14-467-4283
Plate Spacer

144674283
160R742202-13: RNCC: 3 | RNVC: 2

12 Jan 1994

5340-14-403-4467
Access Cover

144034467
3511 245 05361: RNCC: 3 | RNVC: 2
3511-245-05361: RNCC: 5 | RNVC: 2

21 Aug 1985

5340-14-384-3406
Handwheel

143843406
050405201: RNCC: 3 | RNVC: 2
85-692-1872: RNCC: 6 | RNVC: 9

4 May 1983

5340-14-525-1796
Bow Handle

145251796
4-0598-01: RNCC: 3 | RNVC: 2
06150P006001: RNCC: 3 | RNVC: 2

23 May 2001

5340-14-518-2756
Bridge Clamp

145182756
15A1602-10: RNCC: 3 | RNVC: 2

2 Feb 2000

5340-14-475-0785
Mounting Plate

144750785
DM3-3641100: RNCC: 3 | RNVC: 2

16 Mar 1995

5340-14-369-1490
Rod End Connector

143691490
365A25-3104-20: RNCC: 3 | RNVC: 2

17 Apr 1981

5340-14-415-8406
Access Cover

144158406
4-314-1039: RNCC: 3 | RNVC: 2

21 May 1987

5340-14-531-2128
Mounting Plate

145312128
341A54-1011-27: RNCC: 3 | RNVC: 2

31 Jul 2002

5340-14-461-0905
T Bracket

144610905
LN400-013REPB2: RNCC: 3 | RNVC: 2
LN400-013F7REPB2: RNCC: 5 | RNVC: 2
LN400013F4REPB2: RNCC: 5 | RNVC: 2
RAB0602: RNCC: 5 | RNVC: 2

24 Feb 1993

5340-14-459-6827
Runner

144596827
A10125-03-0000P013: RNCC: 3 | RNVC: 2
44028561: RNCC: 3 | RNVC: 2
44028561: RNCC: 5 | RNVC: 9

10 Dec 1992

5340-14-264-1743
Loop Clamp

142641743
55218-332D507DB: RNCC: 3 | RNVC: 2
55218-332-001DB: RNCC: 5 | RNVC: 2

1 Jan 1970

5340-14-425-4778
Control Rod

144254778
0010216337A040: RNCC: 3 | RNVC: 2
1-40-216: RNCC: 3 | RNVC: 9

6 Jul 1988

5340-14-318-3174
Rod End Clevis

143183174
CV15-508533-8: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-503-9613
Mounting Plate

145039613
1556360: RNCC: 3 | RNVC: 2

4 Feb 1998

5340-14-411-4017
Wiring Harness

144114017
A11A822210230: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-14-501-6913
Mounting Bracket

145016913
45279489: RNCC: 3 | RNVC: 2
45279489: RNCC: 3 | RNVC: 9

5 Nov 1997

5340-14-321-7149
Detent Plunger

143217149
75155: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-540-7399
Access Cover

145407399
38052153: RNCC: 3 | RNVC: 2
209931: RNCC: 5 | RNVC: 2
4848ZG8613181583: RNCC: 6 | RNVC: 9

23 Apr 2004

5340-14-396-0089
Anchor Strap

143960089
38910070: RNCC: 3 | RNVC: 2
10070: RNCC: 5 | RNVC: 2
C131: RNCC: 5 | RNVC: 2
C562: RNCC: 5 | RNVC: 2

27 Nov 1984

5340-14-408-2202
Access Cover

144082202
GAM051092412: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-14-300-0831
Rod End Clevis

143000831
177770: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-438-4085
Access Cover

144384085
007436010P: RNCC: 3 | RNVC: 2

21 Mar 1990

5340-14-505-5355
Access Cover

145055355
202422003940: RNCC: 3 | RNVC: 2
20 242 200 3940: RNCC: 5 | RNVC: 2

23 Mar 1998

5340-14-464-3172
Anchor Strap

144643172
5210304: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-14-320-3120
Access Cover

143203120
0044680030: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-503-0744
Access Cover

145030744
46245937: RNCC: 3 | RNVC: 2
46245937: RNCC: 5 | RNVC: 9

7 Jan 1998

5340-14-315-1794
Retaining Strap

143151794
709857: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-253-8557
Mounting Plate

142538557
24030002000: RNCC: 3 | RNVC: 2
30J20: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-14-489-4724
Mounting Plate

144894724
10030968: RNCC: 3 | RNVC: 2
10030952: RNCC: 5 | RNVC: 2
F300 0T 022 9700: RNCC: 6 | RNVC: 9

23 Jul 1997

5340-14-550-9163
Angle Bracket

145509163
RA1B701756111A1: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-537-3334
Mounting Bracket

145373334
106-431: RNCC: 3 | RNVC: 2

20 Oct 2003

5340-14-265-4656
Pipe Hanger

142654656
116: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-530-9337
Mounting Plate

145309337
16280541: RNCC: 3 | RNVC: 2

17 Jul 2002

5340-14-395-9741
Rim Lock

143959741
0000669456: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-508-1288
Bumper

145081288
10089750: RNCC: 3 | RNVC: 2

26 Aug 1998

5340-14-516-3577
Loop Clamp

145163577
0E50547: RNCC: 3 | RNVC: 2

22 Sep 1999

5340-14-460-8743
Rod End Clevis

144608743
43400017: RNCC: 3 | RNVC: 2

12 Feb 1993

5340-14-505-5022
Access Cover

145055022
7032047: RNCC: 3 | RNVC: 2

18 Mar 1998

5340-14-031-8458
Rod End Clevis

140318458
69F3150: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-448-4739
Anchor Strap

144484739
5000921408: RNCC: 3 | RNVC: 2

26 Jun 1991

5340-14-456-2738
Rod End Clevis

144562738
008217080P: RNCC: 3 | RNVC: 2

25 Jun 1992

5340-14-348-7503
Access Cover

143487503
5000495232: RNCC: 3 | RNVC: 2
5000495232: RNCC: 5 | RNVC: 9

19 Apr 1978

5340-14-548-1074
Angle Bracket

145481074
RA1M701215141N1: RNCC: 3 | RNVC: 2

10 Dec 2005

5340-14-508-1044
Angle Bracket

145081044
28080: RNCC: 3 | RNVC: 2
Y00003760: RNCC: 5 | RNVC: 9

26 Aug 1998

5340-14-456-9650
Access Cover

144569650
747135: RNCC: 3 | RNVC: 2

30 Jul 1992

5340-14-534-9221
Access Cover

145349221
970750104: RNCC: 3 | RNVC: 2

16 Apr 2003

5340-14-363-1186
Rod End Clevis

143631186
214990: RNCC: 3 | RNVC: 2

3 Apr 1980

5340-14-375-8914
Anchor Strap

143758914
5000110739: RNCC: 3 | RNVC: 2
5000110739: RNCC: 5 | RNVC: 9

30 Mar 1982

5340-14-476-0903
Angle Bracket

144760903
222-3018-392: RNCC: 3 | RNVC: 2

17 May 1995

5340-14-551-2606
Cover Strip

145512606
RA1A701926371: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-291-3971
Angle Bracket

142913971
0235227610: RNCC: 3 | RNVC: 2

1 Jan 1972

5340-14-348-8339
Rod End Clevis

143488339
48300: RNCC: 3 | RNVC: 2

19 Apr 1978

5340-14-421-0383
Access Cover

144210383
5100112620: RNCC: 3 | RNVC: 2

6 Jan 1988

5340-14-469-1636
Access Cover

144691636
338131P03: RNCC: 3 | RNVC: 2
338131P03: RNCC: 5 | RNVC: 9

11 Apr 1994

5340-14-479-1260
Anchor Strap

144791260
5010099693: RNCC: 3 | RNVC: 2

13 Dec 1995

5340-14-435-9058
Detent Plunger

144359058
0870163B00: RNCC: 3 | RNVC: 2

29 Nov 1989

5340-14-480-8410
Access Cover

144808410
039389R: RNCC: 3 | RNVC: 2

4 Apr 1996

5340-14-447-6374
Plug Button

144476374
5000047376: RNCC: 3 | RNVC: 2

29 May 1991

5340-14-363-7118
Anchor Strap

143637118
A11A231474200: RNCC: 3 | RNVC: 2

6 Jul 1980

5340-14-417-9935
Access Cover

144179935
006540222P: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-14-250-4871
Bail Handle

142504871
12100128: RNCC: 3 | RNVC: 2
12100128: RNCC: 3 | RNVC: 9

1 Jan 1968

5340-14-536-1086
Mounting Bracket

145361086
803237140118: RNCC: 3 | RNVC: 2

9 Jul 2003

5340-14-418-4986
Angle Bracket

144184986
4771906260: RNCC: 3 | RNVC: 2

26 Aug 1987

5340-14-445-0610
Mounting Bracket

144450610
925502: RNCC: 3 | RNVC: 2

31 Jan 1991

5340-14-517-8883
Loop Clamp

145178883
CO63GTS: RNCC: 3 | RNVC: 2

17 Jan 2000

5340-14-518-4654
Mounting Plate

145184654
T716A2001117: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-14-474-8811
Mounting Bracket

144748811
059858J01TRA: RNCC: 3 | RNVC: 2
059858J: RNCC: 5 | RNVC: 2

8 Mar 1995

5340-14-430-3997
Access Cover

144303997
14400068Y: RNCC: 3 | RNVC: 2

20 Mar 1989

5340-14-494-1485
Access Cover

144941485
11015: RNCC: 3 | RNVC: 9
F300 0T 015 7343: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-397-4212
Bow Handle

143974212
30302955PAA: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-14-500-3813
Access Cover

145003813
D62102310004: RNCC: 3 | RNVC: 2
F300 0T 024 3914: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-406-0340
Mounting Bracket

144060340
M04DW3021390901: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-381-4034
Angle Bracket

143814034
227611: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-14-398-8951
Angle Bracket

143988951
574025286: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-553-6866
Mounting Bracket

145536866
82181590000: RNCC: 3 | RNVC: 2

9 May 2007

5340-14-446-0837
Webbing Strap

144460837
007862035P: RNCC: 3 | RNVC: 2

6 Mar 1991

5340-14-553-1035
Butt Hinge

145531035
47243078: RNCC: 3 | RNVC: 2

1 Mar 2007

5340-14-553-0489
Angle Bracket

145530489
RA1B212222741: RNCC: 3 | RNVC: 2

27 Feb 2007

5340-14-551-3518
Angle Bracket

145513518
RA1M709315091: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-541-3571
Mounting Bracket

145413571
21169240-00-REP3: RNCC: 3 | RNVC: 2

3 Jun 2004

5340-14-535-2193
Mounting Plate

145352193
10636990: RNCC: 3 | RNVC: 2

14 May 2003

5340-14-381-7914
Mounting Plate

143817914
16763821: RNCC: 3 | RNVC: 2
16763821: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-14-373-1687
Bail Handle

143731687
KP51: RNCC: 3 | RNVC: 9
RASKP51: RNCC: 5 | RNVC: 9

21 Oct 1981

5340-14-482-7819
Mounting Plate

144827819
1089247T00: RNCC: 3 | RNVC: 2

25 Jul 1996

5340-14-323-0911
Mounting Plate

143230911
M110848: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-462-2210
Block Clamp

144622210
213883-01: RNCC: 3 | RNVC: 2

15 Apr 1993

5340-14-444-9688
Mounting Plate

144449688
330A31-1101-26: RNCC: 3 | RNVC: 2

30 Jan 1991

5340-14-462-5736
Mounting Plate

144625736
GA84003-1: RNCC: 3 | RNVC: 2

28 Apr 1993

5340-14-534-5327
Bow Handle

145345327
11-512-20-128: RNCC: 3 | RNVC: 2

26 Mar 2003

5340-14-431-8165
Retaining Strap

144318165
PM1A235280040: RNCC: 3 | RNVC: 2
PM1A235280040: RNCC: 5 | RNVC: 2

10 May 1989

5340-14-433-9008
Mounting Plate

144339008
022702B: RNCC: 3 | RNVC: 2

22 Aug 1989

5340-14-476-4992
Door Handle

144764992
45212264: RNCC: 3 | RNVC: 2
45212264: RNCC: 3 | RNVC: 9

14 Jun 1995

5340-14-440-5172
Control Rod

144405172
RSM37532REP11: RNCC: 3 | RNVC: 2

16 Jul 1990

5340-14-443-0633
Cover Strip

144430633
PM1A228003124: RNCC: 3 | RNVC: 2
PM1A228003124: RNCC: 5 | RNVC: 2

7 Nov 1990

5340-14-533-9833
Mounting Bracket

145339833
10663140: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-14-324-3733
Control Rod

143243733
001834221P: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-452-9142
Pipe Hanger

144529142
12410430Y: RNCC: 3 | RNVC: 2

28 Jan 1992

5340-14-443-9557
Loop Clamp

144439557
C103462: RNCC: 3 | RNVC: 2
C103462: RNCC: 6 | RNVC: 9

17 Dec 1990

5340-14-444-7282
Access Cover

144447282
5022642422: RNCC: 3 | RNVC: 2

21 Jan 1991

5340-14-453-1555
Mounting Bracket

144531555
16214774: RNCC: 3 | RNVC: 2

5 Feb 1992

5340-14-465-0214
Mounting Bracket

144650214
MB1520F00: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-14-476-0371
Access Cover

144760371
A415100: RNCC: 3 | RNVC: 2
415100: RNCC: 5 | RNVC: 9
415100: RNCC: 5 | RNVC: 9

17 May 1995

5340-14-434-2914
Anchor Strap

144342914
562117: RNCC: 3 | RNVC: 2

20 Sep 1989

5340-14-429-6797
Access Cover

144296797
059482L02TRA: RNCC: 3 | RNVC: 2
059482L: RNCC: 5 | RNVC: 2

8 Feb 1989

5340-14-403-9033
Anchor Strap

144039033
3120560: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-14-405-6042
Rod End Clevis

144056042
035475: RNCC: 3 | RNVC: 2

4 Dec 1985

5340-14-439-1996
Corner Brace

144391996
16318461: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-425-2997
Mounting Plate

144252997
30329516N: RNCC: 3 | RNVC: 2

30 Jun 1988

5340-14-281-2156
Retaining Strap

142812156
307279: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-552-4160
Mounting Bracket

145524160
10637050001: RNCC: 3 | RNVC: 2

20 Dec 2006

5340-14-533-3496
Utility Access Door

145333496
V116031: RNCC: 3 | RNVC: 2

31 Jan 2003

5340-14-438-9550
Access Cover

144389550
39232929: RNCC: 3 | RNVC: 2
39232929: RNCC: 5 | RNVC: 2

11 Apr 1990

5340-14-521-2540
Access Cover

145212540
F1380946: RNCC: 3 | RNVC: 2

12 Jul 2000

5340-14-521-2955
Access Cover

145212955
10516074: RNCC: 3 | RNVC: 2

19 Jul 2000

5340-14-521-4099
Access Cover

145214099
10503385: RNCC: 3 | RNVC: 2

26 Jul 2000

5340-14-379-3130
Control Rod

143793130
15259: RNCC: 3 | RNVC: 2

6 Sep 1982

5340-14-525-5048
Mounting Plate

145255048
1280: RNCC: 3 | RNVC: 2

6 Jun 2001

5340-14-376-6662
Angle Bracket

143766662
460107R: RNCC: 3 | RNVC: 2

28 Apr 1982

5340-14-462-9133
Access Cover

144629133
201201: RNCC: 3 | RNVC: 2
89170607: RNCC: 5 | RNVC: 2

5 May 1993

5340-14-379-2905
Detent Plunger

143792905
075372: RNCC: 3 | RNVC: 9

6 Sep 1982

5340-14-409-0465
Anchor Strap

144090465
3060634: RNCC: 3 | RNVC: 2
3060634: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-14-512-5948
Access Cover

145125948
201517: RNCC: 3 | RNVC: 2

17 Feb 1999

5340-14-434-0055
Mounting Bracket

144340055
534872: RNCC: 3 | RNVC: 2

29 Aug 1989

5340-14-419-2671
Access Cover

144192671
536690: RNCC: 3 | RNVC: 2

16 Oct 1987

5340-14-428-3574
Loop Clamp

144283574
51413105028: RNCC: 3 | RNVC: 2
28G28: RNCC: 5 | RNVC: 2

8 Dec 1988

5340-14-542-3012
Mounting Bracket

145423012
988886523: RNCC: 3 | RNVC: 2
988886523: RNCC: 5 | RNVC: 9

8 Jul 2004

5340-14-502-9988
Mounting Bracket

145029988
330A22-2463-00: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-418-4830
Leaf Spring

144184830
L80G244LD370EP8: RNCC: 3 | RNVC: 2
L80G244-14: RNCC: 5 | RNVC: 2
R80G244LD370EP8: RNCC: 5 | RNVC: 2
1105-170: RNCC: 5 | RNVC: 2

26 Aug 1987

5340-14-406-8199
Access Cover

144068199
676-41111-00-94: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-14-303-2142
Snap Hook

143032142
4030T/040/206: RNCC: 3 | RNVC: 2
4030T40-26: RNCC: 3 | RNVC: 9
4030AT40-16: RNCC: 5 | RNVC: 2
85-689-2838: RNCC: 6 | RNVC: 9

1 Jan 1973

5340-14-217-3370
Loop Clamp

142173370
3160S73-45-320: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-493-4104
Mounting Plate

144934104
NO PRIMARY REF14-493-4104: RNCC: 3 | RNVC: 2
4900008-51102.005: RNCC: 5 | RNVC: 9
F300 0T 012 9611: RNCC: 6 | RNVC: 9

8 Oct 1997

5340-14-336-3844
Retaining Band

143363844
341A55-1144-03: RNCC: 3 | RNVC: 2

24 Jul 1976

5340-14-551-6330
Mounting Plate

145516330
10350200: RNCC: 3 | RNVC: 2

10 Oct 2006

5340-14-432-9788
Loop Clamp

144329788
51311905014: RNCC: 3 | RNVC: 2
21P14: RNCC: 5 | RNVC: 2

5 Jul 1989

5340-14-438-6017
Turnbuckle Body

144386017
TB3040305: RNCC: 3 | RNVC: 2

28 Mar 1990

5340-14-550-4086
Angle Bracket

145504086
2237567830: RNCC: 3 | RNVC: 2

19 Jun 2006

5340-14-378-9001
Retaining Strap

143789001
0035656089: RNCC: 3 | RNVC: 2
0035656089: RNCC: 5 | RNVC: 9
35656089: RNCC: 5 | RNVC: 9

6 Sep 1982

5340-14-395-7189
Mounting Bracket

143957189
RT5546-2: RNCC: 3 | RNVC: 2

17 Dec 2002

5340-14-550-9013
Mounting Plate

145509013
10527939: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-14-266-3139
Retaining Strap

142663139
BFC10224: RNCC: 3 | RNVC: 2
BY148A10224: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-550-5798
Loop Clamp

145505798
2191906162: RNCC: 3 | RNVC: 2

27 Jun 2006

5340-14-549-8500
Mounting Bracket

145498500
2092798: RNCC: 3 | RNVC: 2

16 May 2006

5340-14-445-8909
Bumper

144458909
45611460: RNCC: 3 | RNVC: 2
45611460: RNCC: 5 | RNVC: 9

27 Feb 1991

5340-14-518-1662
Mounting Bracket

145181662
5010093479: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-533-4563
Corner Brace

145334563
T947A1121301: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-14-445-8864
Mounting Bracket

144458864
39959421: RNCC: 3 | RNVC: 2
39959421: RNCC: 5 | RNVC: 9

27 Feb 1991

5340-14-511-0787
Door Handle

145110787
2450003: RNCC: 3 | RNVC: 2

2 Dec 1998

5340-14-393-1243
Loop Clamp

143931243
02134025000: RNCC: 3 | RNVC: 2
021340250: RNCC: 5 | RNVC: 2

12 Apr 1984

5340-14-552-0333
Access Cover

145520333
0177107390: RNCC: 3 | RNVC: 2

21 Nov 2006

5340-14-382-9411
Access Cover

143829411
33016: RNCC: 3 | RNVC: 2

17 Mar 1983

5340-14-504-4785
Access Cover

145044785
TR95608: RNCC: 3 | RNVC: 2

18 Feb 1998

5340-14-523-2617
Pipe Hanger

145232617
RA1M703936115: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-14-483-6895
Access Cover

144836895
TC1F113: RNCC: 3 | RNVC: 2
5000821788: RNCC: 5 | RNVC: 2

27 Sep 1996

5340-14-474-6776
Access Cover

144746776
44030296: RNCC: 3 | RNVC: 2
44030296: RNCC: 5 | RNVC: 9

22 Feb 1995

5340-14-280-0099
Rod End Clevis

142800099
A60571: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-549-5403
Mounting Plate

145495403
AMPC GENE E223461: RNCC: 3 | RNVC: 2

13 Apr 2006

5340-14-448-0738
Cover Strip

144480738
PM1A711050118: RNCC: 3 | RNVC: 2
PM1A711050118: RNCC: 5 | RNVC: 2

12 Jun 1991

5340-14-433-8373
Access Cover

144338373
071588Z: RNCC: 3 | RNVC: 2

16 Aug 1989

5340-14-042-8120
Loop Clamp

140428120
F105254D: RNCC: 3 | RNVC: 2
89254586: RNCC: 5 | RNVC: 2
F105254D: RNCC: 6 | RNVC: 9

11 Dec 1980

5340-14-403-3482
Clamping Catch

144033482
GPP514ZB: RNCC: 3 | RNVC: 2
427717: RNCC: 5 | RNVC: 2

21 Aug 1985

5340-14-481-6329
Mounting Bracket

144816329
1072397Y01: RNCC: 3 | RNVC: 2

23 May 1996

5340-14-471-7249
Mounting Bracket

144717249
2017670S: RNCC: 3 | RNVC: 2

14 Sep 1994

5340-14-426-1243
Webbing Strap

144261243
39232476: RNCC: 3 | RNVC: 2
39232476: RNCC: 5 | RNVC: 9

4 Aug 1988

5340-14-500-6395
Mounting Plate

145006395
E64009998034: RNCC: 3 | RNVC: 2
F300 0T 024 6581: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-400-9532
Loop Clamp

144009532
DA2C203604400: RNCC: 3 | RNVC: 2

21 May 1985

5340-14-235-2249
Luggage Handle

142352249
12114CPN2: RNCC: 3 | RNVC: 2

1 Jan 1967

5340-14-301-5375
Expansion Shield

143015375
TETRA29: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-529-3878
Mounting Bracket

145293878
002656291140: RNCC: 3 | RNVC: 9

28 Mar 2002

5340-14-447-3961
Mounting Bracket

144473961
39538961: RNCC: 3 | RNVC: 2
39538961: RNCC: 5 | RNVC: 9

15 May 1991

5340-14-446-1403
Strap Hinge

144461403
39959418: RNCC: 3 | RNVC: 2
39959418: RNCC: 5 | RNVC: 9

6 Mar 1991

5340-14-482-8637
Mounting Bracket

144828637
009126210P: RNCC: 3 | RNVC: 2

1 Aug 1996

5340-14-514-7503
Webbing Strap

145147503
009804061P: RNCC: 3 | RNVC: 2

15 Jun 1999

5340-14-546-6875
Mounting Bracket

145466875
5010616791: RNCC: 3 | RNVC: 2

2 Aug 2005

5340-14-439-3171
Pipe Hanger

144393171
D55727: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-14-457-5707
Mending Plate

144575707
JVBT105008: RNCC: 3 | RNVC: 2
5045601: RNCC: 5 | RNVC: 9

10 Sep 1992

5340-14-548-6838
Angle Bracket

145486838
04EQUESWTX006714: RNCC: 3 | RNVC: 2

31 Jan 2006

5340-14-302-3836
Control Rod

143023836
174890: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-483-5231
Mounting Plate

144835231
1092538A00: RNCC: 3 | RNVC: 2

18 Sep 1996

5340-14-452-9978
Expansion Plug

144529978
521230: RNCC: 3 | RNVC: 2

29 Jan 1992

5340-14-530-5206
Masking Plate

145305206
79092776: RNCC: 3 | RNVC: 2

18 Jun 2002

5340-14-306-7349
Access Cover

143067349
501547: RNCC: 3 | RNVC: 2
DH501547: RNCC: 5 | RNVC: 9
501547: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-14-505-5324
Access Cover

145055324
39255285: RNCC: 3 | RNVC: 2

23 Mar 1998

5340-14-326-4205
Access Cover

143264205
0038155755: RNCC: 3 | RNVC: 2
0038155755: RNCC: 3 | RNVC: 2
0038155755: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-516-9804
Access Cover

145169804
B001G009: RNCC: 3 | RNVC: 2

28 Oct 1999

5340-14-472-6355
Access Cover

144726355
29052431: RNCC: 3 | RNVC: 2

8 Nov 1994

5340-14-488-6734
Access Cover

144886734
3BT02193AAAA: RNCC: 3 | RNVC: 2
3BT02193AAAA: RNCC: 5 | RNVC: 9

28 May 1997

5340-14-485-6289
Access Cover

144856289
NM30801: RNCC: 3 | RNVC: 2

6 Feb 1997

5340-14-542-5332
Rod Retainer Clip

145425332
50 ZOX00000001: RNCC: 3 | RNVC: 2

21 Jul 2004

5340-14-445-9581
Access Cover

144459581
1080190036: RNCC: 3 | RNVC: 2
1080190036: RNCC: 5 | RNVC: 2

27 Feb 1991

5340-14-448-4825
Angle Bracket

144484825
5516028025: RNCC: 3 | RNVC: 2

26 Jun 1991

5340-14-040-9126
Anchor Strap

140409126
16130655: RNCC: 3 | RNVC: 2
16130655: RNCC: 5 | RNVC: 2
16130655: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-338-5975
Access Door Hinge

143385975
6720710: RNCC: 3 | RNVC: 2
2071: RNCC: 5 | RNVC: 2

17 Dec 1976

5340-14-374-5969
Anchor Strap

143745969
5000042674: RNCC: 3 | RNVC: 2
5000042674: RNCC: 5 | RNVC: 9

30 Jan 1982

5340-14-487-5374
Rod End Clevis

144875374
RA1M287510122: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-14-360-6815
Retaining Strap

143606815
45429: RNCC: 3 | RNVC: 2

19 Dec 1979

5340-14-234-7957
Angle Bracket

142347957
712162: RNCC: 3 | RNVC: 9
157055: RNCC: 5 | RNVC: 9
062712162: RNCC: 5 | RNVC: 9

1 Jan 1967

5340-14-482-6793
Synchro Clamp

144826793
47028603: RNCC: 3 | RNVC: 2

18 Jul 1996

5340-14-376-6114
Runner

143766114
600580: RNCC: 3 | RNVC: 2
600580: RNCC: 5 | RNVC: 2

28 Apr 1982

5340-14-519-4941
Mounting Bracket

145194941
10331564: RNCC: 3 | RNVC: 2

22 Mar 2000

5340-14-266-3034
Angle Bracket

142663034
158461: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-271-3995
Retaining Clip

142713995
NO PRIMARY REF14-271-3995: RNCC: 3 | RNVC: 2
210616: RNCC: 5 | RNVC: 9

1 Jan 1970

5340-14-549-9640
Mounting Bracket

145499640
2092471: RNCC: 3 | RNVC: 2

19 May 2006

5340-14-554-8765
Bridge Clamp

145548765
11490: RNCC: 3 | RNVC: 2

4 Sep 2007

5340-14-325-9138
Key Blank

143259138
25511B14X16XC38: RNCC: 3 | RNVC: 2

2 Jul 1975

5340-14-386-8267
Rim Lock

143868267
3203D7171: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-14-555-3206
Mounting Bracket

145553206
82115945000: RNCC: 3 | RNVC: 2

24 Oct 2007

5340-14-534-7075
Mounting Bracket

145347075
10473366: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-14-447-0040
Vent Plug

144470040
20231508: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-14-446-1571
Cover Strip

144461571
PM1A239300008: RNCC: 3 | RNVC: 2
PM1A239300008: RNCC: 5 | RNVC: 2

6 Mar 1991

5340-14-228-1725
Retaining Strap

142281725
479P443: RNCC: 3 | RNVC: 2

1 Jan 1966

5340-14-339-3229
Mending Plate

143393229
163646: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-14-577-4806
Utility Access Door

145774806
82667689001: RNCC: 3 | RNVC: 2

19 Sep 2013

5340-14-399-3843
Mounting Plate

143993843
79091831: RNCC: 3 | RNVC: 2
79091831: RNCC: 5 | RNVC: 9

6 Mar 1985

5340-14-476-7110
Mounting Bracket

144767110
101162401120: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-14-394-9385
Angle Bracket

143949385
20320008: RNCC: 3 | RNVC: 2
20320008: RNCC: 5 | RNVC: 9

2 Oct 1984

5340-14-518-1223
Mounting Bracket

145181223
5000721385: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-14-402-9511
Angle Bracket

144029511
20328505: RNCC: 3 | RNVC: 2
20328505: RNCC: 5 | RNVC: 9

25 Jul 1985

5340-14-536-0907
Mounting Bracket

145360907
3823H007: RNCC: 3 | RNVC: 2

9 Jul 2003

5340-14-381-4718
Angle Bracket

143814718
573906490: RNCC: 3 | RNVC: 2
573906490: RNCC: 5 | RNVC: 2

25 Jan 1983

5340-14-403-3397
Clamping Catch

144033397
701452131123: RNCC: 3 | RNVC: 2
T0P7B440SP: RNCC: 5 | RNVC: 9

21 Aug 1985

5340-14-399-4665
Angle Bracket

143994665
20393850: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-480-3764
Suction Cup

144803764
90 12 45: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-14-533-6734
Mounting Bracket

145336734
F1262892: RNCC: 3 | RNVC: 2

18 Feb 2003

5340-14-533-6630
Mounting Bracket

145336630
F1264206: RNCC: 3 | RNVC: 2

18 Feb 2003

5340-14-549-9493
Utility Access Door

145499493
2092342-001: RNCC: 3 | RNVC: 2

18 May 2006

5340-14-340-3156
Retaining Strap

143403156
M3C704-144: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-14-396-1570
Angle Bracket

143961570
NO PRIMARY REF14-396-1570: RNCC: 3 | RNVC: 2
P4H014948-00: RNCC: 5 | RNVC: 9

27 Nov 1984

5340-14-483-6874
Access Cover

144836874
P1-88-506018: RNCC: 3 | RNVC: 2
F300 0T 017 6047: RNCC: 6 | RNVC: 9

27 Sep 1996

5340-14-373-8200
Rim Lock Set

143738200
NO PRIMARY REF14-373-8200: RNCC: 3 | RNVC: 2
6600-04MNFH002: RNCC: 5 | RNVC: 9

13 Nov 1981

5340-14-032-1038
Access Cover

140321038
341A81-1082-00: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-378-9456
Bumper

143789456
219742: RNCC: 3 | RNVC: 2
MAF0001004843: RNCC: 6 | RNVC: 9

6 Sep 1982

5340-14-520-2732
Angle Bracket

145202732
610832: RNCC: 3 | RNVC: 9

17 May 2000

5340-14-548-4882
Angle Bracket

145484882
5010060651: RNCC: 3 | RNVC: 2

23 Jan 2006

5340-14-481-6606
Mounting Plate

144816606
79120949: RNCC: 3 | RNVC: 2
79120949: RNCC: 5 | RNVC: 9

23 May 1996

5340-14-554-8707
Pipe Hanger

145548707
M20H718000401B1: RNCC: 3 | RNVC: 2

4 Sep 2007

5340-14-553-8467
Mounting Bracket

145538467
82157575000: RNCC: 3 | RNVC: 2

23 May 2007

5340-14-554-9259
Retaining Bail

145549259
14100007206: RNCC: 3 | RNVC: 2

10 Sep 2007

5340-14-297-5861
Rod End Connector

142975861
52-80-4: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-396-2757
Retaining Strap

143962757
3511 998 31531: RNCC: 3 | RNVC: 2
7017-4-3: RNCC: 5 | RNVC: 9

27 Nov 1984

5340-14-456-7304
Mounting Bracket

144567304
GA28564-1: RNCC: 3 | RNVC: 2

24 Jul 1992

5340-14-555-7873
Mounting Plate

145557873
0177817110: RNCC: 3 | RNVC: 2

14 Dec 2007

5340-14-299-2826
Loop Clamp

142992826
0202117410: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-361-0492
Bumper

143610492
RK5716REP25: RNCC: 3 | RNVC: 2

19 Dec 1979

5340-14-410-3314
Retaining Band

144103314
0260157070: RNCC: 3 | RNVC: 2

18 Jun 1986

5340-14-266-2793
Retaining Strap

142662793
ST406M53P124: RNCC: 3 | RNVC: 2

1 Jan 1970

5340-14-418-7679
Mending Plate

144187679
006614010P: RNCC: 3 | RNVC: 2

16 Sep 1987

5340-14-286-5191
Bail Handle

142865191
79031695: RNCC: 3 | RNVC: 2
79031695: RNCC: 5 | RNVC: 9

1 Jan 1972

5340-14-550-8711
Mounting Plate

145508711
DCP3X: RNCC: 3 | RNVC: 2
5010650045: RNCC: 5 | RNVC: 2

25 Jul 2006

5340-14-514-1556
Access Cover

145141556
2005: RNCC: 3 | RNVC: 2

28 Apr 1999

5340-14-216-0025
Access Cover

142160025
M107445: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-501-0095
Mounting Bracket

145010095
10174500: RNCC: 3 | RNVC: 2
F300 0T 025 0390: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-367-4375
Access Cover

143674375
15802773: RNCC: 3 | RNVC: 2
15802773: RNCC: 5 | RNVC: 2
15802773: RNCC: 5 | RNVC: 9

11 Dec 1980

5340-14-396-1384
Angle Bracket

143961384
4770315780: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-14-394-9124
Angle Bracket

143949124
20731914: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-14-552-1929
Bumper

145521929
61152373AA: RNCC: 3 | RNVC: 2

1 Dec 2006

5340-14-413-1094
Retaining Strap

144131094
ST400S60P191: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-14-399-0840
Retaining Strap

143990840
8834: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-14-511-6155
Cover Strip

145116155
RA1M292680131: RNCC: 3 | RNVC: 2

6 Jan 1999

5340-14-473-8067
Bumper

144738067
1075: RNCC: 3 | RNVC: 2
A09060208: RNCC: 5 | RNVC: 2
A09060208: RNCC: 5 | RNVC: 9

11 Jan 1995

5340-14-479-3028
Loop Clamp

144793028
0279940920: RNCC: 3 | RNVC: 2

9 Jan 1996

5340-14-551-4961
Angle Bracket

145514961
RA1B703246555: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-14-488-7304
Access Cover

144887304
5651928B01: RNCC: 3 | RNVC: 2
1098363P00: RNCC: 5 | RNVC: 2

28 May 1997

5340-14-373-1435
Angle Bracket

143731435
227629: RNCC: 3 | RNVC: 2
227629: RNCC: 5 | RNVC: 9

21 Oct 1981

5340-14-456-8036
Mounting Bracket

144568036
306708: RNCC: 3 | RNVC: 2

24 Jul 1992

5340-14-352-7670
Access Cover

143527670
220204: RNCC: 3 | RNVC: 2
220204: RNCC: 5 | RNVC: 2

14 Nov 1978

5340-14-345-0671
Access Cover

143450671
177160: RNCC: 3 | RNVC: 2

5 Oct 1977

5340-14-531-5545
Access Cover

145315545
TRAPP04634A00: RNCC: 3 | RNVC: 2

28 Aug 2002

5340-14-519-4854
Access Cover

145194854
FGFB910024: RNCC: 3 | RNVC: 2

22 Mar 2000

5340-14-397-2842
Access Cover

143972842
79109612: RNCC: 3 | RNVC: 2
79109612: RNCC: 5 | RNVC: 9

1 Dec 1984

5340-14-509-1216
Mounting Plate

145091216
S01120488: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-14-505-3818
Rod End Clevis

145053818
10214121: RNCC: 3 | RNVC: 2

18 Mar 1998

5340-14-363-8502
Access Cover

143638502
1111696903: RNCC: 3 | RNVC: 2
5000607376: RNCC: 5 | RNVC: 2
5000607376: RNCC: 5 | RNVC: 9
DAH1111696903: RNCC: 5 | RNVC: 9

7 Aug 1980

5340-14-308-6398
Access Cover

143086398
0205160180: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-14-399-9867
Access Cover

143999867
603913: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-14-412-5211
Threaded Rod End

144125211
590854: RNCC: 3 | RNVC: 2

15 Oct 1986

5340-14-351-5514
Bridge Clamp

143515514
0129: RNCC: 3 | RNVC: 2

12 Sep 1978

5340-14-514-8006
Access Cover

145148006
46246056: RNCC: 3 | RNVC: 2
46246056: RNCC: 5 | RNVC: 9

16 Jun 1999

5340-14-441-3330
Rod End Clevis

144413330
46757: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-14-410-5726
Access Cover

144105726
9058829: RNCC: 3 | RNVC: 9
9058829: RNCC: 5 | RNVC: 2
009058829: RNCC: 5 | RNVC: 9

9 Jul 1986

5340-14-438-4395
Access Cover

144384395
20773543: RNCC: 3 | RNVC: 2

21 Mar 1990

5340-14-552-8014
Access Cover

145528014
82108446000: RNCC: 3 | RNVC: 2
82108478: RNCC: 5 | RNVC: 2

2 Feb 2007

5340-14-502-5874
Access Cover

145025874
5001830651: RNCC: 3 | RNVC: 2

17 Dec 1997

5340-14-455-2948
Rod End Clevis

144552948
AU06: RNCC: 3 | RNVC: 2

21 May 1992

5340-14-462-9035
Angle Bracket

144629035
1DM186145: RNCC: 3 | RNVC: 2
91714439: RNCC: 5 | RNVC: 2

5 May 1993

5340-14-506-8212
Protection Bellows

145068212
MTFLSH2011200A: RNCC: 3 | RNVC: 2

25 May 1998

5340-14-530-5939
Mounting Bracket

145305939
211497: RNCC: 3 | RNVC: 2

26 Jun 2002

5340-14-548-5988
Mounting Bracket

145485988
RA1B702206493: RNCC: 3 | RNVC: 2

26 Jan 2006

5340-14-524-5185
Cover Strip

145245185
06S0292204: RNCC: 3 | RNVC: 2

21 Mar 2001

5340-14-551-3413
Angle Bracket

145513413
RA1M112111091A1N1: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-14-468-8188
Bridge Clamp

144688188
MB1931F00: RNCC: 3 | RNVC: 2

23 Mar 1994

5340-14-451-4645
Mounting Plate

144514645
7007386: RNCC: 3 | RNVC: 2
0124041: RNCC: 5 | RNVC: 2
0124041: RNCC: 5 | RNVC: 2

21 Nov 1991

5340-14-216-6866
Retaining Strap

142166866
730966: RNCC: 3 | RNVC: 2
730966: RNCC: 5 | RNVC: 9

1 Jan 1965

5340-14-215-8665
Mounting Plate

142158665
371304: RNCC: 3 | RNVC: 2

1 Jan 1965

5340-14-324-7985
Synchro Clamp

143247985
466-8A2P84: RNCC: 3 | RNVC: 2
466-8A2P84: RNCC: 5 | RNVC: 2

1 Jan 1975

5340-14-548-9010
Mounting Bracket

145489010
82137606000: RNCC: 3 | RNVC: 2

22 Feb 2006

5340-14-551-2659
Retaining Strap

145512659
R47635: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-14-485-1378
Protection Bellows

144851378
38225574: RNCC: 3 | RNVC: 2
38225574: RNCC: 5 | RNVC: 9

10 Jan 1997

5340-14-462-6305
Mounting Plate

144626305
MA1097F00: RNCC: 3 | RNVC: 2

28 Apr 1993

5340-14-545-2655
Mounting Bracket

145452655
S215A4052102: RNCC: 3 | RNVC: 2

30 Mar 2005

5340-14-484-9063
Cushioning Pad

144849063
323975: RNCC: 3 | RNVC: 9

12 Dec 1996

5340-14-548-6109
Angle Bracket

145486109
RA1A704756145: RNCC: 3 | RNVC: 2

27 Jan 2006

5340-14-516-8564
Mounting Plate

145168564
101162941520: RNCC: 3 | RNVC: 2

20 Oct 1999

5340-14-459-7317
Loop Holder

144597317
LN321022REP1LAG3-L32X32X3: RNCC: 3 | RNVC: 2
RAB0182: RNCC: 5 | RNVC: 2

15 Dec 1992

5340-14-514-0768
Pawl Fastener Set

145140768
PM1A005001N20: RNCC: 3 | RNVC: 2
PM1A005001N20: RNCC: 5 | RNVC: 2
MJCD: RNCC: 5 | RNVC: 9

22 Apr 1999

5340-14-350-7384
Rod End Clevis

143507384
105-07-16-11: RNCC: 3 | RNVC: 2
105-07-16-11: RNCC: 5 | RNVC: 2

12 Jul 1978

5340-14-475-0286
Mounting Bracket

144750286
BBZ0450: RNCC: 3 | RNVC: 2

16 Mar 1995

5340-14-302-7943
Screw Hook

143027943
CR0CHETLAIT03X20: RNCC: 3 | RNVC: 2

1 Jan 1973

5340-14-300-3264
Retaining Strap

143003264
15913042: RNCC: 3 | RNVC: 2
15913042: RNCC: 3 | RNVC: 2
15913042: RNCC: 5 | RNVC: 2
15913042: RNCC: 5 | RNVC: 9

1 Jan 1973

5340-14-510-8549
Threaded Rod End

145108549
R27M000M80: RNCC: 3 | RNVC: 2

18 Nov 1998

5340-14-474-6733
Bow Handle

144746733
29779542: RNCC: 3 | RNVC: 9

22 Feb 1995

5340-14-390-8265
Plug Button

143908265
53216: RNCC: 3 | RNVC: 9

1 Mar 1984

5340-14-523-5500
Caster Frame

145235500
R101045B: RNCC: 3 | RNVC: 2

24 Jan 2001

5340-14-322-1968
Rod End Clevis

143221968
A75934: RNCC: 3 | RNVC: 2

1 Jan 1975

5340-14-504-3115
Access Cover

145043115
3759150M1: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-14-398-7439
Anchor Strap

143987439
0031137913: RNCC: 3 | RNVC: 2
0031137913: RNCC: 5 | RNVC: 9

6 Feb 1985

5340-14-425-2564
Access Cover

144252564
093237X01TRA: RNCC: 3 | RNVC: 2
093237X: RNCC: 5 | RNVC: 2

28 Jun 1988

5340-14-359-7317
Access Cover

143597317
BAZ3760: RNCC: 3 | RNVC: 2

15 Oct 1979

5340-14-301-0482
Rod End Clevis

143010482
1030430036: RNCC: 3 | RNVC: 2
1030430036: RNCC: 5 | RNVC: 2

1 Jan 1973

5340-14-384-4060
Furniture Leg Tip

143844060
SERIECN0IR25: RNCC: 3 | RNVC: 2

4 May 1983

5340-14-522-8873
Mounting Bracket

145228873
7511 155 24731: RNCC: 3 | RNVC: 2
1061191D00: RNCC: 5 | RNVC: 2

6 Dec 2000

5340-14-514-1541
Access Cover

145141541
991475: RNCC: 3 | RNVC: 2

28 Apr 1999

5340-14-470-1922
Bow Handle

144701922
405302: RNCC: 3 | RNVC: 2

8 Jun 1994

5340-14-527-3794
Access Cover

145273794
H145036W: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-14-543-4413
Mounting Bracket

145434413
T463G40T0001: RNCC: 1 | RNVC: 2
F1394562: RNCC: 3 | RNVC: 2

29 Oct 2004

5340-14-436-9653
Rod End Clevis

144369653
29404131: RNCC: 3 | RNVC: 2

10 Jan 1990

5340-14-536-2038
Rod End Clevis

145362038
1030910041: RNCC: 3 | RNVC: 2

16 Jul 2003

5340-14-484-7440
Access Cover

144847440
2344360U00: RNCC: 3 | RNVC: 2

5 Dec 1996

5340-14-472-6536
Access Cover

144726536
45570983: RNCC: 3 | RNVC: 2

9 Nov 1994

5340-14-528-9892
Utility Access Door

145289892
706273: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-14-530-2442
Access Cover

145302442
TB1051806: RNCC: 3 | RNVC: 2

22 May 2002

5340-14-494-0253
Mounting Bracket

144940253
30122001: RNCC: 3 | RNVC: 2
F300 0T 015 0874: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-496-5727
Loop Clamp

144965727
5005005053: RNCC: 3 | RNVC: 2
F300 0T 021 7263: RNCC: 6 | RNVC: 9

15 Oct 1997

5340-14-462-8898
Mounting Bracket

144628898
110586: RNCC: 3 | RNVC: 2

5 May 1993

5340-14-454-8462
Access Cover

144548462
525994: RNCC: 3 | RNVC: 2

24 Apr 1992

5340-14-438-8765
Anchor Strap

144388765
005062010110: RNCC: 3 | RNVC: 2
0049482: RNCC: 5 | RNVC: 2

10 Apr 1990

5340-14-446-6701
Retaining Strap

144466701
81004966: RNCC: 3 | RNVC: 2

9 Apr 1991

5340-14-330-0410
Loop Clamp

143300410
70277306: RNCC: 3 | RNVC: 2
277306: RNCC: 5 | RNVC: 9
70277306: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-404-7167
Corner Brace

144047167
20780704: RNCC: 3 | RNVC: 2

20 Nov 1985

5340-14-279-5734
Rod End Clevis

142795734
967566: RNCC: 3 | RNVC: 2

1 Jan 1971

5340-14-450-3241
Access Cover

144503241
103111030401: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-14-454-0976
Access Cover

144540976
16509118: RNCC: 3 | RNVC: 2

19 Mar 1992

5340-14-527-1905
Utility Access Door

145271905
10609328: RNCC: 3 | RNVC: 2

10 Oct 2001

5340-14-413-9633
Retaining Strap

144139633
ST400S60P157: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-14-541-9385
Mounting Bracket

145419385
501099002016A: RNCC: 3 | RNVC: 9

2 Jul 2004

5340-14-485-5871
Mounting Plate

144855871
PL1NA003AA012612REP5: RNCC: 3 | RNVC: 2

30 Jan 1997

5340-14-500-3810
Mounting Plate

145003810
D62102300015: RNCC: 3 | RNVC: 2
F300 0T 024 3911: RNCC: 6 | RNVC: 9

29 Oct 1997

5340-14-435-8222
Mounting Bracket

144358222
332A31-1224-21: RNCC: 3 | RNVC: 2

22 Nov 1989

5340-14-433-2793
Block Clamp

144332793
160H752515-02: RNCC: 3 | RNVC: 2

19 Jul 1989

5340-14-474-4744
Mounting Plate

144744744
312-73638-001: RNCC: 3 | RNVC: 2

15 Feb 1995

5340-14-349-0702
Tubular Fairlead

143490702
A0174-006F19: RNCC: 3 | RNVC: 2

19 Apr 1978

5340-14-332-1652
Access Cover

143321652
NO PRIMARY REF14-332-1652: RNCC: 3 | RNVC: 2
S1795: RNCC: 5 | RNVC: 2
0003564033: RNCC: 5 | RNVC: 2
0003564033: RNCC: 5 | RNVC: 9
3564033: RNCC: 5 | RNVC: 9
E50-3617: RNCC: 5 | RNVC: 9

2 Jul 1975

5340-14-414-4798
Mending Plate

144144798
90111590: RNCC: 3 | RNVC: 2
BM111590: RNCC: 5 | RNVC: 2
85-692-5458: RNCC: 6 | RNVC: 9
85-692-6333: RNCC: 6 | RNVC: 9

28 Jan 1987

5340-14-547-8454
Retaining Strap

145478454
5010572021: RNCC: 3 | RNVC: 2

18 Nov 2005

5340-14-550-9528
Clamping Catch

145509528
18374 EZB: RNCC: 3 | RNVC: 2
91855815: RNCC: 5 | RNVC: 2

2 Aug 2006

5340-14-032-0394
Friction Catch

140320394
16-7-3346: RNCC: 3 | RNVC: 2

5 Jul 1980

5340-14-524-0315
Detent Plunger

145240315
91.7.5002: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-14-313-3597
Retaining Strap

143133597
53569-0: RNCC: 3 | RNVC: 2

1 Jan 1974

Load More Results